createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1709445363660 version 3 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 1800.00 emd 144000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 11-03-2024 17:00:00 tenderQueryClose 08-03-2024 17:00:00 technicalBidOpen 12-03-2024 17:04:02 publishedDate 03-03-2024 16:35:44 publishedByPost RDPR_EE_DIV_VJN publishedByUser KPE12111 - J R PAMPAPATHI bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate None preBidMeetingYn False preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Yashaswini S R splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08392242173 mobileNumber None tenderSupplierList None
tenderSchedule	createdTs 1709445363711 version 10 createdDate None modifiedDate None tenderNumber RDPR/2023-24/BD/WORK_INDENT4707 title Construction of Anganawadi Building at Gudekote B(Rs.18.00lakhs),Appenahalli (Rs.18.00lakhs),Katrahalli(Rs.18.00lakhs)and A.C.halli -A centres in Kudligi Assembly constituency. KKRDB MICRO 23-24 (Rs.72.00 lakhs)gen description Construction of Anganawadi Building at Gudekote B(Rs.18.00lakhs),Appenahalli (Rs.18.00lakhs),Katrahalli(Rs.18.00lakhs)and A.C.halli -A centres in Kudligi Assembly constituency. KKRDB MICRO 23-24 (Rs.72.00 lakhs)gen category WORKS categoryText Works ecv 7191017.42 deptName Rural Development and Panchayat Raj Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 943 locationName RDPR Division Office Vijayanagara provisionalAmount 7200000.0 groupOverheadTotal 1096934.86 fileNumber NO/AEE/PRESD/KDL/KKRDB/AWB/NO5/2023-24
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1709445364000 1 None None Buildings Construction of Anganawadi Building at Appenahalli and A.C.Halli A in Kudligi Assembly constituency Category TSP Est.cost Rs.36.00 lakhs 3048668.09 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2895599 94915 None code01 CONSTRUCTION OF ANGANAWADI BUILDING AT APPENAHALLI VILLAGE :Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of Engineerin-charge PWD DSR. 2023-24/ Pg-188 Item No.19.12.2 Rs. 262.00/sqm Nos 275.1 275.1 6.84 False None None False None False 1881.684 0 2895600 94915 None code02 Demolishing R.C.C. work manually/ by mechanical means including stack-ing of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.PWD DSR. 2023-24/ Pg-187 Item No.19.3 Rs. 2426.00/cum Cum 2547.3 2547.3 3.3 False None None False None False 8406.09 0 2895601 94915 None code03 Demolishing brick work manually/ by mechanical means including stack-ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.2023-24 PWD DSR.I.No 19.7.1 P.No.:163 Rs: 482.00/cum Cum 506.1 506.1 14.28 False None None False None False 7227.108 0 2895602 94915 None code04 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work.PWD DSR.2023-24/V-1 , Pg-5 Item No.1.4.1 Rs.242/cum Cum 254.1 254.1 45.1 False None None False None False 11459.91 0 2895603 94915 None code05 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as pertechnical specifications. (The cost of steel reinforcement & formwork Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates PWD DSR.2023-24/ Pg-15 Item No.2.1.3 Rs.5989.00/cum Cum 6288.45 6288.45 6.06 False None None False None False 38108.007 0 2895604 94915 None code06 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) uptoplinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) PWD DSR. 2023-24/ Pg-9 Item No.5.1.1 Rs.5611 .00/cum Cum 5891.55 5891.55 7.75 False None None False None False 45659.5125 0 2895605 94915 None code07 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) PWD DSR.2023-24/ Pg-9 Item No.5.4 Rs.6389/cum Cum 6708.45 6708.45 6.63 False None None False None False 44477.0235 0 2895606 94915 None code08 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as pertechnical specifications. (The cost of steel reinforcement & formwork Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates PWD DSR.2023-24/V-1, Pg-17 Item No.2.5.1 Rs. 6630.00/cum Cum 6961.5 6961.5 0.72 False None None False None False 5012.28 0 2895607 94915 None code09 Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge.PWD DSR.2023-24/ Pg-44 Item No .8.19.1 Rs .255.00/Sqm Sqm 210.0 210.0 17.49 False None None False None False 3672.9 0 2895608 94915 None code10 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.PWD DSR.2023-24/V-1, Pg-7 Item No.1.11 Rs 433.00/cum Cum 454.65 454.65 56.8 False None None False None False 25824.12 0 2895609 94915 None code11 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. PWD DSR.2023-24/ Pg-14 Item No.6.8 Rs. 7969.00/cum Cum 8367.45 8367.45 16.07 False None None False None False 134464.9215 0 2895610 94915 None code12 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) PWD DSR.2023-24/ Pg-15 Item No.2.2.1 Rs. 6287.00/cum Cum 7129.46 7129.46 5.4 False None None False None False 38499.084 0 2895611 94915 None code13 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) PWD DSR.2023-24/ Pg-15 Item No.2.2.1 Rs. 6287.00/cum Cum 11222.3 11222.3 4.84 False None None False None False 54315.932 0 2895612 94915 None code14 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)2.3.1M20 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PWD DSR.2023-24/ Pg-16 Item No.2.3.1 Rs. 6323.00/cum Cum 9958.73 9958.73 1.67 False None None False None False 16631.0791 0 2895613 94915 None code15 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates/PWD DSR.2023-24/ Pg-16 Item No.2.5.1 Rs.6630.00/cum Cum 11138.4 11138.4 2.84 False None None False None False 31633.056 0 2895614 94915 None code16 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PWD DSR.2023-24/ Pg-16 Item No.2.5.1 Rs.6630.00/cum Cum 10442.25 10442.25 5.91 False None None False None False 61713.6975 0 2895615 94915 None code17 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PWD DSR.2023-24/ Pg-16 Item No.2.5.1 Rs.6630.00/cum Sqm 10094.18 10094.18 0.38 False None None False None False 3835.7884 0 2895616 94915 None code18 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. PWD DSR.2023-24 /V-1, Pg-18 I No.2.11A Rs89.457Kgs Kg 93.93 93.93 1715.81 False None None False None False 161166.0333 0 2895617 94915 None code19 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge PWD DSR.2023-24/V-2, Pg-41 I No. 8.2.1 Rs.295.00/sqm Sqm 309.75 309.75 202.64 False None None False None False 62767.74 0 2895618 94915 None code20 Providing applying two coats of wall putty to inside plastered walls and ceiling using white cement putty. Scrapping and levelling the surface using steel blade and preparing the surface even and smooth by using different grade sand papers, including cost of all materials, cost of labour and scaffolding etc., complete as per the specification. PWD DSR.2023-24/V-2, Pg- 50 I No.8.51 Rs. 100.00/sqm Sqm 105.0 105.0 28.35 False None None False None False 2976.75 0 2895619 94915 None code21 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.PWD DSR.2023-24/V-2, Pg-77 I No. 11.5.1 Rs . 4478.00/Sqm Sqm 4701.9 4701.9 4.1 False None None False None False 19277.79 0 2895620 94915 None code22 Providing and fixing T-iron frames for doors, windows and venti-lators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer: Fixing with 15x3 mm lugs 10 cm long embed-ded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. PWD DSR.2023-24 / Pg- 80 I No. 11.13.1 Rs. 124.00/Kg Sqm 130.2 130.2 90.72 False None None False None False 11811.744 0 2895621 94915 None code23 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. PWD DSR.2023-24/ Pg-79 I No. 11.11.1 Rs. 148.00/ kg Sqm 155.4 155.4 90.72 False None None False None False 14097.888 0 2895622 94915 None code24 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding PWD DSR.2023-24/ Pg-85 I No. 11.34 A Rs. 168.00/kg Kg 137.55 137.55 5.67 False None None False None False 779.9085 0 2895623 94915 None code25 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm PWD DSR.2023-24 /V-2, Pg-60 I No.9.12.2 Rs. 1145.00/sqm Sqm 1308.3 1308.3 26.55 False None None False None False 34735.365 0 2895624 94915 None code26 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete PWD DSR.2023-24 /V-2, Pg-60 I No.9.11 Rs. 889.00sqm Sqm 811.65 811.65 7.38 False None None False None False 5989.977 0 2895625 94915 None code27 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge PWD DSR.2023-24/V-2, Pg.48 I No.8.39 Rs. 127.00/sqm Sqm 133.35 133.35 149.16 False None None False None False 19890.486 0 2895626 94915 None code28 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge PWD DSR.2023-24/V-2, Pg- 46 I No.8.31 Rs. 178.00/sqm Sqm 186.9 186.9 81.83 False None None False None False 15294.027 0 2895627 94915 None code29 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineerin-Charge. Kg 144.9 144.9 60.0 False None None False None False 8694.0 0 2895628 94915 None code30 Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge PWD SR. 2023-24/ Pg- 49 I No.8.49 Rs.4.00/cm cm 4.2 4.2 3500.0 False None None False None False 14700.0 0 2895629 94915 None code31 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.PWD DSR.2023-24/V-2, Pg-48 I No .8.40 Rs. 115.00/sqm Sqm 120.75 120.75 19.54 False None None False None False 2359.455 0 2895630 94915 None code32 CONSTRUCTION OF FIRST FLOOR Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. PWD DSR.2023-24/ Pg-14 Item No.6.8 Rs. 7969.00/cum Cum 8447.14 8447.14 18.34 False None None False None False 154920.5476 0 2895631 94915 None code33 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) PWD DSR.2023-24/ Pg-15 Item No.2.2.1 Rs. 6287.00/cum Cum 11222.3 11222.3 2.484 False None None False None False 27876.1932 0 2895632 94915 None code34 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PWD DSR.2023-24/ Pg-16 Item No.2.5.1 Rs.6630.00/cum Cum 11204.7 11204.7 2.95 False None None False None False 33053.865 0 2895633 94915 None code35 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PWD DSR.2023-24/ Pg-16 Item No.2.5.1 Rs.6630.00/cum Cum 10508.55 10508.55 5.35 False None None False None False 56220.7425 0 2895634 94915 None code36 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PWD DSR.2023-24/ Pg-16 Item No.2.5.1 Rs.6630.00/cum Sqm 10160.47 10160.47 0.34 False None None False None False 3454.5598 0 2895635 94915 None code37 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. PWD DSR.2023-24 /V-1, Pg-18 I No.2.11A Rs89.457Kgs Kgs 94.82 94.82 1009.87 False None None False None False 95755.8734 0 2895636 94915 None code38 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge PWD DSR.2023-24/V-2, Pg-41 I No. 8.2.1 Rs.295.00/sqm Sqm 312.7 312.7 152.85 False None None False None False 47796.195 0 2895637 94915 None code39 Providing applying two coats of wall putty to inside plastered walls and ceiling using white cement putty. Scrapping and levelling the surface using steel blade and preparing the surface even and smooth by using different grade sand papers, including cost of all materials, cost of labour and scaffolding etc., complete as per the specification. PWD DSR.2023-24/V-2, Pg- 50 I No.8.51 Rs. 100.00/sqm Sqm 106.0 106.0 24.16 False None None False None False 2560.96 0 2895638 94915 None code40 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.PWD DSR.2023-24/V-2, Pg-77 I No. 11.5.1 Rs . 4478.00/Sqm Sqm 4746.68 4746.68 2.31 False None None False None False 10964.8308 0 2895639 94915 None code41 Providing and fixing T-iron frames for doors, windows and venti-lators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer: Fixing with 15x3 mm lugs 10 cm long embed-ded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. PWD DSR.2023-24 / Pg- 80 I No. 11.13.1 Rs. 124.00/Kg Sqm 131.44 131.44 151.2 False None None False None False 19873.728 0 2895640 94915 None code42 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. PWD DSR.2023-24/ Pg-79 I No. 11.11.1 Rs. 148.00/ kg Sqm 156.88 156.88 151.2 False None None False None False 23720.256 0 2895641 94915 None code43 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm PWD DSR.2023-24 /V-2, Pg-60 I No.9.12.2 Rs. 1145.00/sqm Sqm 1320.76 1320.76 18.46 False None None False None False 24381.2296 0 2895642 94915 None code44 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge PWD DSR.2023-24/V-2, Pg.48 I No.8.39 Rs. 127.00/sqm Sqm 134.62 134.62 99.853 False None None False None False 13442.21086 0 2895643 94915 None code45 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge PWD DSR.2023-24/V-2, Pg- 46 I No.8.31 Rs. 178.00/sqm Sqm 188.68 188.68 77.15 False None None False None False 14556.662 0 2895644 94915 None code46 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.PWD DSR.2023-24/V-2, Pg-48 I No .8.40 Rs. 115.00/sqm Sqm 121.9 121.9 21.3975 False None None False None False 2608.35525 0 2895645 94915 None code47 Suplying and fixing RCC rings for toilet soak pit (size 1.5m dia and height of 0.30m) with suitable cover as per RWSS SR 2012-13 No 1284.0 1284.0 5.0 False None None False None False 6420.0 0 2895646 94915 None code48 Providing and laying flooring with burnt stone slabs 10 cms thick rough chistle dressed on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3, , including cost of materials, mortar, labour, curing complete as per pecifications PWD DSR.2023-24/V-2, Pg-63 I No .9.27 Rs. 2388.00/sqm Sqm 2507.4 2507.4 2.25 False None None False None False 5641.65 0 2895647 94915 None code49 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:PWD SR. 2023-24/ Pg- 131 I No.14.1.1 Rs.4884.00 No 5128.2 5128.2 1.0 False None None False None False 5128.2 0 2895648 94915 None code50 Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separat PWD SR. 2023-24/ Pg- 123 I No.13.34A Rs.9.00/ltrs Ltr 9.45 9.45 750.0 False None None False None False 7087.5 0 2895649 94915 None code51 Providing and fixing chlorinated polyvinyl chloride ( CPVC) pipes having thermal stability for Hot and cold water supply including all CPVC palin and brass threated fittings i/c fixing the pipe with clamps at 1.0 mt. spacing, This includes jointing of pipes and fittings with one step CPVC solvent cement and cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer inchare concealed work work including cutting chases and making good the walls etc., PWD SR. 2023-24/ Pg- 122 I No.13.32.3 Rs. 477.00/mtr Mtr 500.85 500.85 30.0 False None None False None False 15025.5 0 2895650 94915 None code52 Supplying & delivery of pump. 0.50HP As per market rate. Each 4200.0 4200.0 1.0 False None None False None False 4200.0 0 2895651 94915 None code53 Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. including painting with anticorrosive approved paint etc. complete including all lead and lifts etc PWD SR. 2023-24/ Pg- 85 I No.7.3 Rs. 2140.00/mtr Each 2247.0 2247.0 1.0 False None None False None False 2247.0 0 2895652 94915 None code54 Concealed Conduit System Supplying heavy gauge PVC conduit pipe ……mm dia .......mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary - 25mm dia 2mm thick PWD EL SR. 2023-24 / Pg- 2 I No.1.2.2 Rs.78.00/Mtr Mtr 78.0 78.0 35.0 False None None False None False 2730.0 0 2895653 94915 None code55 Supplying heavy gauge PVC Conduit Pipe ….dia .......mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. - 25mm dia 2mm thick PWD EL SR.2022-23/ Pg- 2 I No.1.3.2 Rs 79.00/Mtr Mtr 79.0 79.0 35.0 False None None False None False 2765.0 0 2895654 94915 None code56 Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. - PWD EL SR. 2023-24 / Pg- 2 I No.1.4.4 Rs.161..00/Nos No 161.0 161.0 5.0 False None None False None False 805.0 0 2895655 94915 None code57 Supplying and fixing 230 volts 20/40 Wats flourecent lamp holder PWD EL SR. 2023-24/ Pg-52 I No.12.45 Rs.33.00/Nos No 33.0 33.0 5.0 False None None False None False 165.0 0 2895656 94915 None code58 Supplying &fixing Surface mounting type retro fittype- tube.WcomprisingofLED linear source with CCT 6500 burning hours and Compliance to IS 10322/IEC60598,LM 79 & LM 80. The LED are driven by HF electronic driver integrated in thesystem, with power loss should lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20 Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 yearsWarrantyagainstany manufacturingdefectworking understandard electrical condition PWD EL SR. 2023-24 / Pg- 46 I No.11.10.2 Rs.330.00/Nos No 330.0 330.0 2.0 False None None False None False 660.0 0 2895657 94915 None code59 Supplying capacitor type ceiling fan complete with down road blades shakle regulator capacities., for operation on 230 volts 50 cyeles single phase AC supply conforming to ISI 374-1979 and with double ball bearing sytem and as per technical approved (1200 mm swing) PWD EL SR. 2023-24/ Pg- 30 I No.6.3.1 Rs.2984.00/Nos No 2984.0 2984.0 3.0 False None None False None False 8952.0 0 2895658 94915 None code60 Point wiring using Copper wire with switch.2.Supplying and wiring adopting loop system in existing PVCConduit /casing capping using 2x1.5mm2 (Phase & Neutral)& 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulatedcopper wire (confirming to IS-694: and latest amendments) witha 6A flush type SP control switch shall be fixed on the existingplastic sheet/ gang box, the other end of the wires shall beterminated with sufficient loose PWD EL SR. 2023-24 / Pg- 05 I No.2.1.1 Rs.285.00/point No 285.0 285.0 8.0 False None None False None False 2280.0 0 2895659 94915 None code61 Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP A - Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch PWD EL SR. 2023-24 / Pg- 05 I No.2.1.2 Rs394.00/point Point 394.0 394.0 10.0 False None None False None False 3940.0 0 2895660 94915 None code62 Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP A - Long point above 6Mtr upto 10Mtr from tapping point to out let via switch PWD EL SR. 2020-23 / Pg- 05 I No.2.1.3 Rs.570.00/point Point 570.0 570.0 6.0 False None None False None False 3420.0 0 2895661 94915 None code63 Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3654 - 6Amps 3/5 Way PWD EL SR. 2023-24 / Pg- 8 I.No.3.1.2 Rs.147.000/point Point 147.0 147.0 10.0 False None None False None False 1470.0 0 2895662 94915 None code64 Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc., and fixing on existing wooden or metal box using N.F. screws.PWD EL SR. 2023-24 / Pg- 09 I No.3.9 Rs.0.35/sq cm Sq CM 0.35 0.35 500.0 False None None False None False 175.0 0 2895663 94915 None code65 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. - DP6-40 A DP PWD EL SR. 2023-24 / Pg-17 I No.5.18.5 Rs1060.00 /each No 1060.0 1060.0 1.0 False None None False None False 1060.0 0 2895664 94915 None code66 Rod type of earthing using 40 mm Dia, 3 Mtr long MS rod as ground rod, in earth pit of 300 mm width and 3300 mm depth and using 50x6 mm flat welded to ground rod as terminal & connected to equipment ground terminal using PVC Al wire as specifie PWD EL SR. 2023-24 / Pg-23 I No.51.04 Rs2172.00 /each No 2172.0 2172.0 1.0 False None None False None False 2172.0 0 2895665 94915 None code67 KEB Charges for meter fixing and Deposit Each 4000.0 4000.0 1.0 False None None False None False 4000.0 0 2895666 94915 None code68 Providing and fixing KKRDB Name board Nos 6000.0 6000.0 1.0 False None None False None False 6000.0 0 2895667 94915 None code69 CONSTRUCTION OF ANGANAWADI BUILDING AT A.C.HALLI VILLAGE :Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of Engineerin-charge PWD DSR. 2023-24/ Pg-188 Item No.19.12.2 Rs. 262.00/sqm Nos 275.1 275.1 6.84 False None None False None False 1881.684 0 2895668 94915 None code70 Demolishing R.C.C. work manually/ by mechanical means including stack-ing of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.PWD DSR. 2023-24/ Pg-187 Item No.19.3 Rs. 2426.00/cum Cum 2547.3 2547.3 3.52 False None None False None False 8966.496 0 2895669 94915 None code71 Demolishing brick work manually/ by mechanical means including stack-ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.2023-24 PWD DSR.I.No 19.7.1 P.No.:163 Rs: 482.00/cum Cum 506.1 506.1 15.33 False None None False None False 7758.513 0 2895670 94915 None code72 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work.PWD DSR.2023-24/V-1 , Pg-5 Item No.1.4.1 Rs.242/cum Cum 254.1 254.1 44.2 False None None False None False 11231.22 0 2895671 94915 None code73 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as pertechnical specifications. (The cost of steel reinforcement & formwork Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates PWD DSR.2023-24/ Pg-15 Item No.2.1.3 Rs.5989.00/cum Cum 6288.45 6288.45 5.68 False None None False None False 35718.396 0 2895672 94915 None code74 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) uptoplinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) PWD DSR. 2023-24/ Pg-9 Item No.5.1.1 Rs.5611 .00/cum Cum 5891.55 5891.55 7.03 False None None False None False 41417.5965 0 2895673 94915 None code75 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) PWD DSR.2023-24/ Pg-9 Item No.5.4 Rs.6389/cum Cum 6708.45 6708.45 6.09 False None None False None False 40854.4605 0 2895674 94915 None code76 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as pertechnical specifications. (The cost of steel reinforcement & formwork Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates PWD DSR.2023-24/V-1, Pg-17 Item No.2.5.1 Rs. 6630.00/cum Cum 6961.5 6961.5 0.65 False None None False None False 4524.975 0 2895675 94915 None code77 Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge.PWD DSR.2023-24/ Pg-44 Item No .8.19.1 Rs .255.00/Sqm Sqm 210.0 210.0 14.88 False None None False None False 3124.8 0 2895676 94915 None code78 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.PWD DSR.2023-24/V-1, Pg-7 Item No.1.11 Rs 433.00/cum Cum 454.65 454.65 59.44 False None None False None False 27024.396 0 2895677 94915 None code79 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. PWD DSR.2023-24/ Pg-14 Item No.6.8 Rs. 7969.00/cum Cum 8367.45 8367.45 14.76 False None None False None False 123503.562 0 2895678 94915 None code80 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) PWD DSR.2023-24/ Pg-15 Item No.2.2.1 Rs. 6287.00/cum Cum 7129.46 7129.46 5.4 False None None False None False 38499.084 0 2895679 94915 None code81 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) PWD DSR.2023-24/ Pg-15 Item No.2.2.1 Rs. 6287.00/cum Cum 11222.3 11222.3 4.84 False None None False None False 54315.932 0 2895680 94915 None code82 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)2.3.1M20 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PWD DSR.2023-24/ Pg-16 Item No.2.3.1 Rs. 6323.00/cum Cum 9958.73 9958.73 1.54 False None None False None False 15336.4442 0 2895681 94915 None code83 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates/PWD DSR.2023-24/ Pg-16 Item No.2.5.1 Rs.6630.00/cum Cum 11138.4 11138.4 2.56 False None None False None False 28514.304 0 2895682 94915 None code84 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PWD DSR.2023-24/ Pg-16 Item No.2.5.1 Rs.6630.00/cum Cum 10442.25 10442.25 6.07 False None None False None False 63384.4575 0 2895683 94915 None code85 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PWD DSR.2023-24/ Pg-16 Item No.2.5.1 Rs.6630.00/cum Sqm 10094.18 10094.18 0.38 False None None False None False 3835.7884 0 2895684 94915 None code86 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. PWD DSR.2023-24 /V-1, Pg-18 I No.2.11A Rs89.457Kgs Kg 93.93 93.93 1756.03 False None None False None False 164943.8979 0 2895685 94915 None code87 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge PWD DSR.2023-24/V-2, Pg-41 I No. 8.2.1 Rs.295.00/sqm Sqm 309.75 309.75 189.64 False None None False None False 58740.99 0 2895686 94915 None code88 Providing applying two coats of wall putty to inside plastered walls and ceiling using white cement putty. Scrapping and levelling the surface using steel blade and preparing the surface even and smooth by using different grade sand papers, including cost of all materials, cost of labour and scaffolding etc., complete as per the specification. PWD DSR.2023-24/V-2, Pg- 50 I No.8.51 Rs. 100.00/sqm Sqm 105.0 105.0 24.85 False None None False None False 2609.25 0 2895687 94915 None code89 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.PWD DSR.2023-24/V-2, Pg-77 I No. 11.5.1 Rs . 4478.00/Sqm Sqm 4701.9 4701.9 4.1 False None None False None False 19277.79 0 2895688 94915 None code90 Providing and fixing T-iron frames for doors, windows and venti-lators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer: Fixing with 15x3 mm lugs 10 cm long embed-ded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. PWD DSR.2023-24 / Pg- 80 I No. 11.13.1 Rs. 124.00/Kg Sqm 130.2 130.2 90.72 False None None False None False 11811.744 0 2895689 94915 None code91 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. PWD DSR.2023-24/ Pg-79 I No. 11.11.1 Rs. 148.00/ kg Sqm 155.4 155.4 90.72 False None None False None False 14097.888 0 2895690 94915 None code92 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding PWD DSR.2023-24/ Pg-85 I No. 11.34 A Rs. 168.00/kg Kg 137.55 137.55 5.67 False None None False None False 779.9085 0 2895691 94915 None code93 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm PWD DSR.2023-24 /V-2, Pg-60 I No.9.12.2 Rs. 1145.00/sqm Sqm 1308.3 1308.3 23.05 False None None False None False 30156.315 0 2895692 94915 None code94 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete PWD DSR.2023-24 /V-2, Pg-60 I No.9.11 Rs. 889.00sqm Sqm 811.65 811.65 7.38 False None None False None False 5989.977 0 2895693 94915 None code95 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge PWD DSR.2023-24/V-2, Pg.48 I No.8.39 Rs. 127.00/sqm Sqm 133.35 133.35 139.66 False None None False None False 18623.661 0 2895694 94915 None code96 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge PWD DSR.2023-24/V-2, Pg- 46 I No.8.31 Rs. 178.00/sqm Sqm 186.9 186.9 74.83 False None None False None False 13985.727 0 2895695 94915 None code97 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineerin-Charge. Kg 144.9 144.9 60.0 False None None False None False 8694.0 0 2895696 94915 None code98 Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge PWD SR. 2023-24/ Pg- 49 I No.8.49 Rs.4.00/cm cm 4.2 4.2 5000.0 False None None False None False 21000.0 0 2895697 94915 None code99 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.PWD DSR.2023-24/V-2, Pg-48 I No .8.40 Rs. 115.00/sqm Sqm 120.75 120.75 19.54 False None None False None False 2359.455 0 2895698 94915 None code100 CONSTRUCTION OF FIRST FLOOR Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. PWD DSR.2023-24/ Pg-14 Item No.6.8 Rs. 7969.00/cum Cum 8447.14 8447.14 19.28 False None None False None False 162860.8592 0 2895699 94915 None code101 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) PWD DSR.2023-24/ Pg-15 Item No.2.2.1 Rs. 6287.00/cum Cum 11222.3 11222.3 2.73 False None None False None False 30636.879 0 2895700 94915 None code102 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PWD DSR.2023-24/ Pg-16 Item No.2.5.1 Rs.6630.00/cum Cum 11204.7 11204.7 2.89 False None None False None False 32381.583 0 2895701 94915 None code103 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PWD DSR.2023-24/ Pg-16 Item No.2.5.1 Rs.6630.00/cum Cum 10508.55 10508.55 5.51 False None None False None False 57902.1105 0 2895702 94915 None code104 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PWD DSR.2023-24/ Pg-16 Item No.2.5.1 Rs.6630.00/cum Sqm 10160.47 10160.47 0.34 False None None False None False 3454.5598 0 2895703 94915 None code105 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. PWD DSR.2023-24 /V-1, Pg-18 I No.2.11A Rs89.457Kgs Kgs 94.82 94.82 1050.63 False None None False None False 99620.7366 0 2895704 94915 None code106 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge PWD DSR.2023-24/V-2, Pg-41 I No. 8.2.1 Rs.295.00/sqm Sqm 312.7 312.7 154.49 False None None False None False 48309.023 0 2895705 94915 None code107 Providing applying two coats of wall putty to inside plastered walls and ceiling using white cement putty. Scrapping and levelling the surface using steel blade and preparing the surface even and smooth by using different grade sand papers, including cost of all materials, cost of labour and scaffolding etc., complete as per the specification. PWD DSR.2023-24/V-2, Pg- 50 I No.8.51 Rs. 100.00/sqm Sqm 106.0 106.0 24.16 False None None False None False 2560.96 0 2895706 94915 None code108 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.PWD DSR.2023-24/V-2, Pg-77 I No. 11.5.1 Rs . 4478.00/Sqm Sqm 4746.68 4746.68 2.31 False None None False None False 10964.8308 0 2895707 94915 None code109 Providing and fixing T-iron frames for doors, windows and venti-lators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer: Fixing with 15x3 mm lugs 10 cm long embed-ded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. PWD DSR.2023-24 / Pg- 80 I No. 11.13.1 Rs. 124.00/Kg Sqm 131.44 131.44 151.2 False None None False None False 19873.728 0 2895708 94915 None code110 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. PWD DSR.2023-24/ Pg-79 I No. 11.11.1 Rs. 148.00/ kg Sqm 156.88 156.88 151.2 False None None False None False 23720.256 0 2895709 94915 None code111 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm PWD DSR.2023-24 /V-2, Pg-60 I No.9.12.2 Rs. 1145.00/sqm Sqm 1320.76 1320.76 18.46 False None None False None False 24381.2296 0 2895710 94915 None code112 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge PWD DSR.2023-24/V-2, Pg.48 I No.8.39 Rs. 127.00/sqm Sqm 134.62 134.62 108.1 False None None False None False 14552.422 0 2895711 94915 None code113 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge PWD DSR.2023-24/V-2, Pg- 46 I No.8.31 Rs. 178.00/sqm Sqm 188.68 188.68 70.55 False None None False None False 13311.374 0 2895712 94915 None code114 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.PWD DSR.2023-24/V-2, Pg-48 I No .8.40 Rs. 115.00/sqm Sqm 121.9 121.9 21.3975 False None None False None False 2608.35525 0 2895713 94915 None code115 Suplying and fixing RCC rings for toilet soak pit (size 1.5m dia and height of 0.30m) with suitable cover as per RWSS SR 2012-13 No 1284.0 1284.0 5.0 False None None False None False 6420.0 0 2895714 94915 None code116 Providing and laying flooring with burnt stone slabs 10 cms thick rough chistle dressed on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3, , including cost of materials, mortar, labour, curing complete as per pecifications PWD DSR.2023-24/V-2, Pg-63 I No .9.27 Rs. 2388.00/sqm Sqm 2507.4 2507.4 2.25 False None None False None False 5641.65 0 2895715 94915 None code117 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:PWD SR. 2023-24/ Pg- 131 I No.14.1.1 Rs.4884.00 No 5128.2 5128.2 2.0 False None None False None False 10256.4 0 2895716 94915 None code118 Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separat PWD SR. 2023-24/ Pg- 123 I No.13.34A Rs.9.00/ltrs Ltr 9.45 9.45 750.0 False None None False None False 7087.5 0 2895717 94915 None code119 Providing and fixing chlorinated polyvinyl chloride ( CPVC) pipes having thermal stability for Hot and cold water supply including all CPVC palin and brass threated fittings i/c fixing the pipe with clamps at 1.0 mt. spacing, This includes jointing of pipes and fittings with one step CPVC solvent cement and cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer inchare concealed work work including cutting chases and making good the walls etc., PWD SR. 2023-24/ Pg- 122 I No.13.32.3 Rs. 477.00/mtr Mtr 500.85 500.85 30.0 False None None False None False 15025.5 0 2895718 94915 None code120 Supplying & delivery of pump. 0.50HP As per market rate. Each 4200.0 4200.0 1.0 False None None False None False 4200.0 0 2895719 94915 None code121 Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. including painting with anticorrosive approved paint etc. complete including all lead and lifts etc PWD SR. 2023-24/ Pg- 85 I No.7.3 Rs. 2140.00/mtr Each 2247.0 2247.0 1.0 False None None False None False 2247.0 0 2895720 94915 None code122 Concealed Conduit System Supplying heavy gauge PVC conduit pipe ……mm dia .......mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary - 25mm dia 2mm thick PWD EL SR. 2023-24 / Pg- 2 I No.1.2.2 Rs.78.00/Mtr Mtr 78.0 78.0 40.0 False None None False None False 3120.0 0 2895721 94915 None code123 Supplying heavy gauge PVC Conduit Pipe ….dia .......mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. - 25mm dia 2mm thick PWD EL SR.2022-23/ Pg- 2 I No.1.3.2 Rs 79.00/Mtr Mtr 79.0 79.0 40.0 False None None False None False 3160.0 0 2895722 94915 None code124 Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. - PWD EL SR. 2023-24 / Pg- 2 I No.1.4.4 Rs.161..00/Nos No 161.0 161.0 5.0 False None None False None False 805.0 0 2895723 94915 None code125 Supplying and fixing 230 volts 20/40 Wats flourecent lamp holder PWD EL SR. 2023-24/ Pg-52 I No.12.45 Rs.33.00/Nos No 33.0 33.0 5.0 False None None False None False 165.0 0 2895724 94915 None code126 Supplying &fixing Surface mounting type retro fittype- tube.WcomprisingofLED linear source with CCT 6500 burning hours and Compliance to IS 10322/IEC60598,LM 79 & LM 80. The LED are driven by HF electronic driver integrated in thesystem, with power loss should lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20 Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 yearsWarrantyagainstany manufacturingdefectworking understandard electrical condition PWD EL SR. 2023-24 / Pg- 46 I No.11.10.2 Rs.330.00/Nos No 330.0 330.0 2.0 False None None False None False 660.0 0 2895725 94915 None code127 Supplying capacitor type ceiling fan complete with down road blades shakle regulator capacities., for operation on 230 volts 50 cyeles single phase AC supply conforming to ISI 374-1979 and with double ball bearing sytem and as per technical approved (1200 mm swing) PWD EL SR. 2023-24/ Pg- 30 I No.6.3.1 Rs.2984.00/Nos No 2984.0 2984.0 3.0 False None None False None False 8952.0 0 2895726 94915 None code128 Point wiring using Copper wire with switch.2.Supplying and wiring adopting loop system in existing PVCConduit /casing capping using 2x1.5mm2 (Phase & Neutral)& 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulatedcopper wire (confirming to IS-694: and latest amendments) witha 6A flush type SP control switch shall be fixed on the existingplastic sheet/ gang box, the other end of the wires shall beterminated with sufficient loose PWD EL SR. 2023-24 / Pg- 05 I No.2.1.1 Rs.285.00/point No 285.0 285.0 10.0 False None None False None False 2850.0 0 2895727 94915 None code129 Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP A - Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch PWD EL SR. 2023-24 / Pg- 05 I No.2.1.2 Rs394.00/point Point 394.0 394.0 10.0 False None None False None False 3940.0 0 2895728 94915 None code130 Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP A - Long point above 6Mtr upto 10Mtr from tapping point to out let via switch PWD EL SR. 2020-23 / Pg- 05 I No.2.1.3 Rs.570.00/point Point 570.0 570.0 8.0 False None None False None False 4560.0 0 2895729 94915 None code131 Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3654 - 6Amps 3/5 Way PWD EL SR. 2023-24 / Pg- 8 I.No.3.1.2 Rs.147.000/point Point 147.0 147.0 8.0 False None None False None False 1176.0 0 2895730 94915 None code132 Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc., and fixing on existing wooden or metal box using N.F. screws.PWD EL SR. 2023-24 / Pg- 09 I No.3.9 Rs.0.35/sq cm Sq CM 0.35 0.35 500.0 False None None False None False 175.0 0 2895731 94915 None code133 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. - DP6-40 A DP PWD EL SR. 2023-24 / Pg-17 I No.5.18.5 Rs1060.00 /each No 1060.0 1060.0 1.0 False None None False None False 1060.0 0 2895732 94915 None code134 Rod type of earthing using 40 mm Dia, 3 Mtr long MS rod as ground rod, in earth pit of 300 mm width and 3300 mm depth and using 50x6 mm flat welded to ground rod as terminal & connected to equipment ground terminal using PVC Al wire as specifie PWD EL SR. 2023-24 / Pg-23 I No.51.04 Rs2172.00 /each No 2172.0 2172.0 1.0 False None None False None False 2172.0 0 2895733 94915 None code135 KEB Charges for meter fixing and Deposit Each 4000.0 4000.0 1.0 False None None False None False 4000.0 0 2895734 94915 None code136 Providing and fixing KKRDB Name board Nos 6000.0 6000.0 1.0 False None None False None False 6000.0 0 1709445364000 1 None None Buildings Construction of Anganawadi Building at Gudekote B in Kudligi Assembly constituency category SCP (Est.cost Rs.18.00lakhs) 1522707.89 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2895735 94916 None code01 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of Engineerin-charge PWD DSR. 2023-24/ Pg-188 Item No.19.12.2 Rs. 262.00/sqm Nos 275.1 275.1 6.84 False None None False None False 1881.684 0 2895736 94916 None code02 Demolishing R.C.C. work manually/ by mechanical means including stack-ing of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.PWD DSR. 2023-24/ Pg-187 Item No.19.3 Rs. 2426.00/cum Cum 2547.3 2547.3 3.52 False None None False None False 8966.496 0 2895737 94916 None code03 Demolishing brick work manually/ by mechanical means including stack-ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.2023-24 PWD DSR.I.No 19.7.1 P.No.:163 Rs: 482.00/cum Cum 506.1 506.1 15.33 False None None False None False 7758.513 0 2895738 94916 None code04 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work.PWD DSR.2023-24/V-1 , Pg-5 Item No.1.4.1 Rs.242/cum Cum 254.1 254.1 58.374 False None None False None False 14832.8334 0 2895739 94916 None code05 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as pertechnical specifications. (The cost of steel reinforcement & formwork Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates PWD DSR.2023-24/ Pg-15 Item No.2.1.3 Rs.5989.00/cum Cum 6288.45 6288.45 7.9 False None None False None False 49678.755 0 2895740 94916 None code06 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) uptoplinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) PWD DSR. 2023-24/ Pg-9 Item No.5.1.1 Rs.5611 .00/cum Cum 5891.55 5891.55 12.177 False None None False None False 71741.40435 0 2895741 94916 None code07 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) PWD DSR.2023-24/ Pg-9 Item No.5.4 Rs.6389/cum Cum 6708.45 6708.45 16.12 False None None False None False 108140.214 0 2895742 94916 None code08 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as pertechnical specifications. (The cost of steel reinforcement & formwork Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates PWD DSR.2023-24/V-1, Pg-17 Item No.2.5.1 Rs. 6630.00/cum Cum 6961.5 6961.5 1.52 False None None False None False 10581.48 0 2895743 94916 None code09 Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge.PWD DSR.2023-24/ Pg-44 Item No .8.19.1 Rs .255.00/Sqm Sqm 210.0 210.0 21.92 False None None False None False 4603.2 0 2895744 94916 None code10 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.PWD DSR.2023-24/V-1, Pg-7 Item No.1.11 Rs 433.00/cum Cum 454.65 454.65 84.57 False None None False None False 38449.7505 0 2895745 94916 None code11 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. PWD DSR.2023-24/ Pg-14 Item No.6.8 Rs. 7969.00/cum Cum 8367.45 8367.45 28.04 False None None False None False 234623.298 0 2895746 94916 None code12 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) PWD DSR.2023-24/ Pg-15 Item No.2.2.1 Rs. 6287.00/cum Cum 7129.46 7129.46 6.075 False None None False None False 43311.4695 0 2895747 94916 None code13 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) PWD DSR.2023-24/ Pg-15 Item No.2.2.1 Rs. 6287.00/cum Cum 11222.3 11222.3 5.589 False None None False None False 62721.4347 0 2895748 94916 None code14 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)2.3.1M20 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PWD DSR.2023-24/ Pg-16 Item No.2.3.1 Rs. 6323.00/cum Cum 9958.73 9958.73 3.33 False None None False None False 33162.5709 0 2895749 94916 None code15 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates/PWD DSR.2023-24/ Pg-16 Item No.2.5.1 Rs.6630.00/cum Cum 11138.4 11138.4 4.36 False None None False None False 48563.424 0 2895750 94916 None code16 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PWD DSR.2023-24/ Pg-16 Item No.2.5.1 Rs.6630.00/cum Cum 10442.25 10442.25 8.12 False None None False None False 84791.07 0 2895751 94916 None code17 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PWD DSR.2023-24/ Pg-16 Item No.2.5.1 Rs.6630.00/cum Sqm 10094.18 10094.18 0.86 False None None False None False 8680.9948 0 2895752 94916 None code18 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. PWD DSR.2023-24 /V-1, Pg-18 I No.2.11A Rs89.457Kgs Kg 93.93 93.93 2457.94 False None None False None False 230874.3042 0 2895753 94916 None code19 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge PWD DSR.2023-24/V-2, Pg-41 I No. 8.2.1 Rs.295.00/sqm Sqm 309.75 309.75 299.182 False None None False None False 92671.6245 0 2895754 94916 None code20 Providing applying two coats of wall putty to inside plastered walls and ceiling using white cement putty. Scrapping and levelling the surface using steel blade and preparing the surface even and smooth by using different grade sand papers, including cost of all materials, cost of labour and scaffolding etc., complete as per the specification. PWD DSR.2023-24/V-2, Pg- 50 I No.8.51 Rs. 100.00/sqm Sqm 105.0 105.0 41.13 False None None False None False 4318.65 0 2895755 94916 None code21 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.PWD DSR.2023-24/V-2, Pg-77 I No. 11.5.1 Rs . 4478.00/Sqm Sqm 4701.9 4701.9 12.39 False None None False None False 58256.541 0 2895756 94916 None code22 Providing and fixing T-iron frames for doors, windows and venti-lators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer: Fixing with 15x3 mm lugs 10 cm long embed-ded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. PWD DSR.2023-24 / Pg- 80 I No. 11.13.1 Rs. 124.00/Kg Sqm 130.2 130.2 181.44 False None None False None False 23623.488 0 2895757 94916 None code23 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. PWD DSR.2023-24/ Pg-79 I No. 11.11.1 Rs. 148.00/ kg Sqm 155.4 155.4 181.44 False None None False None False 28195.776 0 2895758 94916 None code24 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding PWD DSR.2023-24/ Pg-85 I No. 11.34 A Rs. 168.00/kg Kg 137.55 137.55 11.34 False None None False None False 1559.817 0 2895759 94916 None code25 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm PWD DSR.2023-24 /V-2, Pg-60 I No.9.12.2 Rs. 1145.00/sqm Sqm 1308.3 1308.3 37.65 False None None False None False 49257.495 0 2895760 94916 None code26 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete PWD DSR.2023-24 /V-2, Pg-60 I No.9.11 Rs. 889.00sqm Sqm 811.65 811.65 10.305 False None None False None False 8364.05325 0 2895761 94916 None code27 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge PWD DSR.2023-24/V-2, Pg.48 I No.8.39 Rs. 127.00/sqm Sqm 133.35 133.35 239.652 False None None False None False 31957.5942 0 2895762 94916 None code28 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge PWD DSR.2023-24/V-2, Pg- 46 I No.8.31 Rs. 178.00/sqm Sqm 186.9 186.9 100.66 False None None False None False 18813.354 0 2895763 94916 None code29 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineerin-Charge. Kg 144.9 144.9 60.0 False None None False None False 8694.0 0 2895764 94916 None code30 Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge PWD SR. 2023-24/ Pg- 49 I No.8.49 Rs.4.00/cm cm 4.2 4.2 7200.0 False None None False None False 30240.0 0 2895765 94916 None code31 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.PWD DSR.2023-24/V-2, Pg-48 I No .8.40 Rs. 115.00/sqm Sqm 120.75 120.75 48.5325 False None None False None False 5860.299375 0 2895766 94916 None code32 Suplying and fixing RCC rings for toilet soak pit (size 1.5m dia and height of 0.30m) with suitable cover as per RWSS SR 2012-13 No 1284.0 1284.0 5.0 False None None False None False 6420.0 0 2895767 94916 None code33 Providing and laying flooring with burnt stone slabs 10 cms thick rough chistle dressed on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3, , including cost of materials, mortar, labour, curing complete as per pecifications PWD DSR.2023-24/V-2, Pg-63 I No .9.27 Rs. 2388.00/sqm Sqm 2507.4 2507.4 2.25 False None None False None False 5641.65 0 2895768 94916 None code34 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:PWD SR. 2023-24/ Pg- 131 I No.14.1.1 Rs.4884.00 No 5128.2 5128.2 2.0 False None None False None False 10256.4 0 2895769 94916 None code35 Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separat PWD SR. 2023-24/ Pg- 123 I No.13.34A Rs.9.00/ltrs Ltr 9.45 9.45 750.0 False None None False None False 7087.5 0 2895770 94916 None code36 Providing and fixing chlorinated polyvinyl chloride ( CPVC) pipes having thermal stability for Hot and cold water supply including all CPVC palin and brass threated fittings i/c fixing the pipe with clamps at 1.0 mt. spacing, This includes jointing of pipes and fittings with one step CPVC solvent cement and cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer inchare concealed work work including cutting chases and making good the walls etc., PWD SR. 2023-24/ Pg- 122 I No.13.32.3 Rs. 477.00/mtr Mtr 500.85 500.85 35.0 False None None False None False 17529.75 0 2895771 94916 None code37 Supplying & delivery of pump. 0.50HP As per market rate. Each 4200.0 4200.0 1.0 False None None False None False 4200.0 0 2895772 94916 None code38 Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. including painting with anticorrosive approved paint etc. complete including all lead and lifts etc PWD SR. 2023-24/ Pg- 85 I No.7.3 Rs. 2140.00/mtr Each 2247.0 2247.0 1.0 False None None False None False 2247.0 0 2895773 94916 None code39 Concealed Conduit System Supplying heavy gauge PVC conduit pipe ……mm dia .......mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary - 25mm dia 2mm thick PWD EL SR. 2023-24 / Pg- 2 I No.1.2.2 Rs.78.00/Mtr Mtr 78.0 78.0 45.0 False None None False None False 3510.0 0 2895774 94916 None code40 Supplying heavy gauge PVC Conduit Pipe ….dia .......mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. - 25mm dia 2mm thick PWD EL SR.2022-23/ Pg- 2 I No.1.3.2 Rs 79.00/Mtr Mtr 79.0 79.0 45.0 False None None False None False 3555.0 0 2895775 94916 None code41 Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. - PWD EL SR. 2023-24 / Pg- 2 I No.1.4.4 Rs.161..00/Nos No 161.0 161.0 5.0 False None None False None False 805.0 0 2895776 94916 None code42 Supplying and fixing 230 volts 20/40 Wats flourecent lamp holder PWD EL SR. 2023-24/ Pg-52 I No.12.45 Rs.33.00/Nos No 33.0 33.0 5.0 False None None False None False 165.0 0 2895777 94916 None code43 Supplying and fixing of Surface mounting type retro fitt ype tube. PWD ELSR. 023-24 Pg 46 I No.11.10.2 Rs.330.00 No 330.0 330.0 2.0 False None None False None False 660.0 0 2895778 94916 None code44 Supplying capacitor type ceiling fan complete with down road blades shakle regulator capacities., for operation on 230 volts 50 cyeles single phase AC supply conforming to ISI 374-1979 and with double ball bearing sytem and as per technical approved (1200 mm swing) PWD EL SR. 2023-24/ Pg- 30 I No.6.3.1 Rs.2984.00/Nos No 2984.0 2984.0 3.0 False None None False None False 8952.0 0 2895779 94916 None code45 Point wiring using Copper wire with switch.2.Supplying and wiring adopting loop system in existing PVCConduit /casing capping using 2x1.5mm2 (Phase & Neutral)& 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulatedcopper wire (confirming to IS-694: and latest amendments) witha 6A flush type SP control switch shall be fixed on the existingplastic sheet/ gang box, the other end of the wires shall beterminated with sufficient loose PWD EL SR. 2023-24 / Pg- 05 I No.2.1.1 Rs.285.00/point Point 285.0 285.0 12.0 False None None False None False 3420.0 0 2895780 94916 None code46 Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP A - Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch PWD EL SR. 2023-24 / Pg- 05 I No.2.1.2 Rs394.00/point Point 394.0 394.0 10.0 False None None False None False 3940.0 0 2895781 94916 None code47 Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP A - Long point above 6Mtr upto 10Mtr from tapping point to out let via switch PWD EL SR. 2020-23 / Pg- 05 I No.2.1.3 Rs.570.00/point Point 570.0 570.0 8.0 False None None False None False 4560.0 0 2895782 94916 None code48 Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3654 - 6Amps 3/5 Way PWD EL SR. 2023-24 / Pg- 8 I.No.3.1.2 Rs.147.000/point Point 147.0 147.0 8.0 False None None False None False 1176.0 0 2895783 94916 None code49 Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc., and fixing on existing wooden or metal box using N.F. screws.PWD EL SR. 2023-24 / Pg- 09 I No.3.9 Rs.0.35/sq cm Sq CM 0.35 0.35 500.0 False None None False None False 175.0 0 2895784 94916 None code50 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. - DP6-40 A DP PWD EL SR. 2023-24 / Pg-17 I No.5.18.5 Rs1060.00 /each No 1060.0 1060.0 1.0 False None None False None False 1060.0 0 2895785 94916 None code51 Rod type of earthing using 40 mm Dia, 3 Mtr long MS rod as ground rod, in earth pit of 300 mm width and 3300 mm depth and using 50x6 mm flat welded to ground rod as terminal & connected to equipment ground terminal using PVC Al wire as specifie PWD EL SR. 2023-24 / Pg-23 I No.51.04 Rs2172.00 /each No 2172.0 2172.0 1.0 False None None False None False 2172.0 0 2895786 94916 None code52 KEB Charges for meter fixing and Deposit Each 4000.0 4000.0 1.0 False None None False None False 4000.0 0 2895787 94916 None code53 Providing and fixing KKRDB Name board Nos 6000.0 6000.0 1.0 False None None False None False 6000.0 0 1709445364000 1 None None Buildings Construction of Anganawadi Building at Katrahalli village in Kudligi Assembly constituency category GENERAL Est.cost Rs.18.00lakhs 1522706.58 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2895788 94917 None code01 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of Engineerin-charge PWD DSR. 2023-24/ Pg-188 Item No.19.12.2 Rs. 262.00/sqm Nos 275.1 275.1 6.84 False None None False None False 1881.684 0 2895789 94917 None code02 Demolishing R.C.C. work manually/ by mechanical means including stack-ing of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.PWD DSR. 2023-24/ Pg-187 Item No.19.3 Rs. 2426.00/cum Cum 2547.3 2547.3 3.52 False None None False None False 8966.496 0 2895790 94917 None code03 Demolishing brick work manually/ by mechanical means including stack-ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.2023-24 PWD DSR.I.No 19.7.1 P.No.:163 Rs: 482.00/cum Cum 506.1 506.1 15.33 False None None False None False 7758.513 0 2895791 94917 None code04 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work.PWD DSR.2023-24/V-1 , Pg-5 Item No.1.4.1 Rs.242/cum Cum 254.1 254.1 58.373 False None None False None False 14832.5793 0 2895792 94917 None code05 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as pertechnical specifications. (The cost of steel reinforcement & formwork Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates PWD DSR.2023-24/ Pg-15 Item No.2.1.3 Rs.5989.00/cum Cum 6288.45 6288.45 7.9 False None None False None False 49678.755 0 2895793 94917 None code06 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) uptoplinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) PWD DSR. 2023-24/ Pg-9 Item No.5.1.1 Rs.5611 .00/cum Cum 5891.55 5891.55 12.177 False None None False None False 71741.40435 0 2895794 94917 None code07 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) PWD DSR.2023-24/ Pg-9 Item No.5.4 Rs.6389/cum Cum 6708.45 6708.45 16.12 False None None False None False 108140.214 0 2895795 94917 None code08 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as pertechnical specifications. (The cost of steel reinforcement & formwork Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates PWD DSR.2023-24/V-1, Pg-17 Item No.2.5.1 Rs. 6630.00/cum Cum 6961.5 6961.5 1.52 False None None False None False 10581.48 0 2895796 94917 None code09 Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge.PWD DSR.2023-24/ Pg-44 Item No .8.19.1 Rs .255.00/Sqm Sqm 210.0 210.0 21.915 False None None False None False 4602.15 0 2895797 94917 None code10 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.PWD DSR.2023-24/V-1, Pg-7 Item No.1.11 Rs 433.00/cum Cum 454.65 454.65 84.57 False None None False None False 38449.7505 0 2895798 94917 None code11 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. PWD DSR.2023-24/ Pg-14 Item No.6.8 Rs. 7969.00/cum Cum 8367.45 8367.45 28.04 False None None False None False 234623.298 0 2895799 94917 None code12 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) PWD DSR.2023-24/ Pg-15 Item No.2.2.1 Rs. 6287.00/cum Cum 7129.46 7129.46 6.075 False None None False None False 43311.4695 0 2895800 94917 None code13 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) PWD DSR.2023-24/ Pg-15 Item No.2.2.1 Rs. 6287.00/cum Cum 11222.3 11222.3 5.589 False None None False None False 62721.4347 0 2895801 94917 None code14 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)2.3.1M20 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PWD DSR.2023-24/ Pg-16 Item No.2.3.1 Rs. 6323.00/cum Cum 9958.73 9958.73 3.33 False None None False None False 33162.5709 0 2895802 94917 None code15 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates/PWD DSR.2023-24/ Pg-16 Item No.2.5.1 Rs.6630.00/cum Cum 11138.4 11138.4 4.36 False None None False None False 48563.424 0 2895803 94917 None code16 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PWD DSR.2023-24/ Pg-16 Item No.2.5.1 Rs.6630.00/cum Cum 10442.25 10442.25 8.12 False None None False None False 84791.07 0 2895804 94917 None code17 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PWD DSR.2023-24/ Pg-16 Item No.2.5.1 Rs.6630.00/cum Sqm 10094.18 10094.18 0.86 False None None False None False 8680.9948 0 2895805 94917 None code18 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. PWD DSR.2023-24 /V-1, Pg-18 I No.2.11A Rs89.457Kgs Kg 93.93 93.93 2457.94 False None None False None False 230874.3042 0 2895806 94917 None code19 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge PWD DSR.2023-24/V-2, Pg-41 I No. 8.2.1 Rs.295.00/sqm Sqm 309.75 309.75 299.182 False None None False None False 92671.6245 0 2895807 94917 None code20 Providing applying two coats of wall putty to inside plastered walls and ceiling using white cement putty. Scrapping and levelling the surface using steel blade and preparing the surface even and smooth by using different grade sand papers, including cost of all materials, cost of labour and scaffolding etc., complete as per the specification. PWD DSR.2023-24/V-2, Pg- 50 I No.8.51 Rs. 100.00/sqm Sqm 105.0 105.0 41.13 False None None False None False 4318.65 0 2895808 94917 None code21 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.PWD DSR.2023-24/V-2, Pg-77 I No. 11.5.1 Rs . 4478.00/Sqm Sqm 4701.9 4701.9 12.39 False None None False None False 58256.541 0 2895809 94917 None code22 Providing and fixing T-iron frames for doors, windows and venti-lators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer: Fixing with 15x3 mm lugs 10 cm long embed-ded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. PWD DSR.2023-24 / Pg- 80 I No. 11.13.1 Rs. 124.00/Kg Sqm 130.2 130.2 181.44 False None None False None False 23623.488 0 2895810 94917 None code23 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. PWD DSR.2023-24/ Pg-79 I No. 11.11.1 Rs. 148.00/ kg Sqm 155.4 155.4 181.44 False None None False None False 28195.776 0 2895811 94917 None code24 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding PWD DSR.2023-24/ Pg-85 I No. 11.34 A Rs. 168.00/kg Kg 137.55 137.55 11.34 False None None False None False 1559.817 0 2895812 94917 None code25 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm PWD DSR.2023-24 /V-2, Pg-60 I No.9.12.2 Rs. 1145.00/sqm Sqm 1308.3 1308.3 37.65 False None None False None False 49257.495 0 2895813 94917 None code26 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete PWD DSR.2023-24 /V-2, Pg-60 I No.9.11 Rs. 889.00sqm Sqm 811.65 811.65 10.305 False None None False None False 8364.05325 0 2895814 94917 None code27 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge PWD DSR.2023-24/V-2, Pg.48 I No.8.39 Rs. 127.00/sqm Sqm 133.35 133.35 239.652 False None None False None False 31957.5942 0 2895815 94917 None code28 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge PWD DSR.2023-24/V-2, Pg- 46 I No.8.31 Rs. 178.00/sqm Sqm 186.9 186.9 100.66 False None None False None False 18813.354 0 2895816 94917 None code29 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineerin-Charge. Kg 144.9 144.9 60.0 False None None False None False 8694.0 0 2895817 94917 None code30 Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge PWD SR. 2023-24/ Pg- 49 I No.8.49 Rs.4.00/cm cm 4.2 4.2 7200.0 False None None False None False 30240.0 0 2895818 94917 None code31 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.PWD DSR.2023-24/V-2, Pg-48 I No .8.40 Rs. 115.00/sqm Sqm 120.75 120.75 48.5325 False None None False None False 5860.299375 0 2895819 94917 None code32 Suplying and fixing RCC rings for toilet soak pit (size 1.5m dia and height of 0.30m) with suitable cover as per RWSS SR 2012-13 No 1284.0 1284.0 5.0 False None None False None False 6420.0 0 2895820 94917 None code33 Providing and laying flooring with burnt stone slabs 10 cms thick rough chistle dressed on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3, , including cost of materials, mortar, labour, curing complete as per pecifications PWD DSR.2023-24/V-2, Pg-63 I No .9.27 Rs. 2388.00/sqm Sqm 2507.4 2507.4 2.25 False None None False None False 5641.65 0 2895821 94917 None code34 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:PWD SR. 2023-24/ Pg- 131 I No.14.1.1 Rs.4884.00 No 5128.2 5128.2 2.0 False None None False None False 10256.4 0 2895822 94917 None code35 Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separat PWD SR. 2023-24/ Pg- 123 I No.13.34A Rs.9.00/ltrs Ltr 9.45 9.45 750.0 False None None False None False 7087.5 0 2895823 94917 None code36 Providing and fixing chlorinated polyvinyl chloride ( CPVC) pipes having thermal stability for Hot and cold water supply including all CPVC palin and brass threated fittings i/c fixing the pipe with clamps at 1.0 mt. spacing, This includes jointing of pipes and fittings with one step CPVC solvent cement and cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer inchare concealed work work including cutting chases and making good the walls etc., PWD SR. 2023-24/ Pg- 122 I No.13.32.3 Rs. 477.00/mtr Mtr 500.85 500.85 35.0 False None None False None False 17529.75 0 2895824 94917 None code37 Supplying & delivery of pump. 0.50HP As per market rate. Each 4200.0 4200.0 1.0 False None None False None False 4200.0 0 2895825 94917 None code38 Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. including painting with anticorrosive approved paint etc. complete including all lead and lifts etc PWD SR. 2023-24/ Pg- 85 I No.7.3 Rs. 2140.00/mtr Each 2247.0 2247.0 1.0 False None None False None False 2247.0 0 2895826 94917 None code39 Concealed Conduit System Supplying heavy gauge PVC conduit pipe ……mm dia .......mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary - 25mm dia 2mm thick PWD EL SR. 2023-24 / Pg- 2 I No.1.2.2 Rs.78.00/Mtr Mtr 78.0 78.0 45.0 False None None False None False 3510.0 0 2895827 94917 None code40 Supplying heavy gauge PVC Conduit Pipe ….dia .......mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. - 25mm dia 2mm thick PWD EL SR.2022-23/ Pg- 2 I No.1.3.2 Rs 79.00/Mtr Mtr 79.0 79.0 45.0 False None None False None False 3555.0 0 2895828 94917 None code41 Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. - PWD EL SR. 2023-24 / Pg- 2 I No.1.4.4 Rs.161..00/Nos No 161.0 161.0 5.0 False None None False None False 805.0 0 2895829 94917 None code42 Supplying and fixing 230 volts 20/40 Wats flourecent lamp holder PWD EL SR. 2023-24/ Pg-52 I No.12.45 Rs.33.00/Nos No 33.0 33.0 5.0 False None None False None False 165.0 0 2895830 94917 None code43 Supplying &fixing Surface mounting type type- tube .WcomprisingofLED linear source with CCT 6500 degree K, efficacy lumen per W, PWD EL SR. 2023-24 / Pg- 46 I No.11.10.2 Rs.330.00/Nos No 330.0 330.0 2.0 False None None False None False 660.0 0 2895831 94917 None code44 Supplying capacitor type ceiling fan complete with down road blades shakle regulator capacities., for operation on 230 volts 50 cyeles single phase AC supply conforming to ISI 374-1979 and with double ball bearing sytem and as per technical approved (1200 mm swing) PWD EL SR. 2023-24/ Pg- 30 I No.6.3.1 Rs.2984.00/Nos No 2984.0 2984.0 3.0 False None None False None False 8952.0 0 2895832 94917 None code45 Point wiring using Copper wire with switch.2.Supplying and wiring adopting loop system in existing PVCConduit /casing capping using 2x1.5mm2 (Phase & Neutral)& 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulatedcopper wire (confirming to IS-694: and latest amendments) witha 6A flush type SP control switch shall be fixed on the existingplastic sheet/ gang box, the other end of the wires shall beterminated with sufficient loose PWD EL SR. 2023-24 / Pg- 05 I No.2.1.1 Rs.285.00/point Point 285.0 285.0 12.0 False None None False None False 3420.0 0 2895833 94917 None code46 Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP A - Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch PWD EL SR. 2023-24 / Pg- 05 I No.2.1.2 Rs394.00/point Point 394.0 394.0 10.0 False None None False None False 3940.0 0 2895834 94917 None code47 Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP A - Long point above 6Mtr upto 10Mtr from tapping point to out let via switch PWD EL SR. 2020-23 / Pg- 05 I No.2.1.3 Rs.570.00/point Point 570.0 570.0 8.0 False None None False None False 4560.0 0 2895835 94917 None code48 Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3654 - 6Amps 3/5 Way PWD EL SR. 2023-24 / Pg- 8 I.No.3.1.2 Rs.147.000/point No 147.0 147.0 8.0 False None None False None False 1176.0 0 2895836 94917 None code49 Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc., and fixing on existing wooden or metal box using N.F. screws.PWD EL SR. 2023-24 / Pg- 09 I No.3.9 Rs.0.35/sq cm Sq CM 0.35 0.35 500.0 False None None False None False 175.0 0 2895837 94917 None code50 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. - DP6-40 A DP PWD EL SR. 2023-24 / Pg-17 I No.5.18.5 Rs1060.00 /each No 1060.0 1060.0 1.0 False None None False None False 1060.0 0 2895838 94917 None code51 Rod type of earthing using 40 mm Dia, 3 Mtr long MS rod as ground rod, in earth pit of 300 mm width and 3300 mm depth and using 50x6 mm flat welded to ground rod as terminal & connected to equipment ground terminal using PVC Al wire as specifie PWD EL SR. 2023-24 / Pg-23 I No.51.04 Rs2172.00 /each No 2172.0 2172.0 1.0 False None None False None False 2172.0 0 2895839 94917 None code52 KEB Charges for meter fixing and Deposit Each 4000.0 4000.0 1.0 False None None False None False 4000.0 0 2895840 94917 None code53 Providing and fixing KKRDB Name board Nos 6000.0 6000.0 1.0 False None None False None False 6000.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1709445367000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1709445367000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1709445367000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1709456700000 0 None None ELIGIBILITY Total value of civil engineering works executed and payments received in the last five years (2018-19 , 2019-20, 2020-21,2021-22 and 2022-23) should not be less than Estimated cost of the work. Turnover certificate must be submitted with UDIN No on it, Failing will be considered as invalid. None 1709456708000 0 None None ELIGIBILITY Bidder can access tender documents from the website, fill them and submit the completed tender document into electronic tender on the website. https://eproc.karnataka.gov.in/ after submitting the EMD and tender processing fee in the form of e-payment. EMD will be refunded only after acceptance of successful bidder. None 1709456712000 0 None None ELIGIBILITY Royalty on construction materials and other taxes will be deducted as per prevailing Govt orders. None 1709456717000 0 None None ELIGIBILITY Self attested copies of the document of all details uploaded to the e-portal in original should be submitted to the executive engineer on the date & time specified above i.e., at the time of bid opening as per notification. None 1709456723000 0 None None ELIGIBILITY The Employer reserves the right to reject any or all Tenders without assigning any reason. None 1709456728000 0 None None ELIGIBILITY It is to be noted that any false documentation is found to be uploaded, the action may attract punitive measures such as blacklisting, cancellation of registration etc. None 1709456737000 0 None None ELIGIBILITY All other conditions and requirements has to be fulfilled as per the standard bid document kw-3. None 1709456743000 0 None None ELIGIBILITY The tenderer should quote his rates With all leads and lifts loading and un loading, including cost of Labour, hire charges of Machinery and other incidental charges etc complete as per the directions of the engineer incharge of the work specifications. None 1709456749000 0 None None ELIGIBILITY Tenderer shall note that the Tenders of those found Eligible as mentioned in Clause 3 - Qualification of the Tenderer in Section 2 : Instructions to Tenderers (ITT), will only be considered for evaluation. None 1709456755000 0 None None ELIGIBILITY The tenderer should maintain the road during the defective liability period - 1YEAR ( maintenance period starts from the date of completion of the work.) None 1709456760000 0 None None ELIGIBILITY All original documents should be submitted in PDF format only. None 1709456766000 0 None None ELIGIBILITY The Department is not responsible for any delay in accessing e-procurement portal. None 1709456771000 0 None None ELIGIBILITY The Security Deposit will be released only after satisfactorily completion of defect liability period None 1709456802000 0 None None ELIGIBILITY Time given for the completion of work is 11 months (IMP). None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Satisfactorily completion as a prime contractor for at least one similar work to an extent of 50 percent of the cost of the work(Rs.36.00 lakhs), for all works costing upto Rs.100.00 lakhs (Building Workdone). Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Executed in any one year the following minimum quantities of work (Earthwork Excavation and Construction of embankment - 393.00 Cum,PCC/RCC - 120.00 Cum,RSM/SSM-67.00sqm,BBM - 100.00 cum,Steel-8359.00kgs,Plastering - 1038.00 sqm Flooring - 165.00 sqm,) Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Constitution/ legal status of Tenderer, Place of Registration , Principal place of business. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- PWD Registration None None None None Achieved in at least two financial years an average annual financial turnover of Rs 72.00 Lakhs . (2018-19 to 2022-23).(Usually not less than the estimated cost under this contract) Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Liquid assets or availability of credit facilities of no less than Rs. 22.00 Lakhs Credit lines or letter of credit or certificates from banks for meeting the fund requirement etc. usually 30percent of the amount of contract. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit None None None None Total value of civl engineering works executed and payments received in the last five years (2018-19 to 2022-23) Others Value of civiling Engineering works executed createdTs version createdDate modifiedDate documentName None None None None Others -- Value of civiling Engineering works executed None None None None List of existing commitments and ongoing works Others Existing commitment createdTs version createdDate modifiedDate documentName None None None None Others -- Existing commitment None None None None List of works for which tenders already submitted Others List of works for which participated in tenders createdTs version createdDate modifiedDate documentName None None None None Others -- List of works for which tenders already submitted None None None None Banker Details for reference Others Banker contact details createdTs version createdDate modifiedDate documentName None None None None Others -- Banker contact details None None None None The proposed methodology and program of construction, backed with equipment planning and deployment, duly supported with broad calculations and quality control procedures proposed to be adopted, justifying their capability of execution and completion of the work as per technical specifications within the stipulated period of completion. Others PERT/CHART createdTs version createdDate modifiedDate documentName None None None None Others -- CPM/PERT chart with relevant Documents None None None None Reports on the financial standing of the tenderer, such as profit and loss statements and auditors reports for the last five years Others profit and loss statements createdTs version createdDate modifiedDate documentName None None None None Others -- profit and loss statements None None None None Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded Others Biodata of the personnel. createdTs version createdDate modifiedDate documentName None None None None Others -- Biodata of the personnel. None None None None All the tenderer shall provide the requested Qualification Information accurately and in sufficient details as per formats given in Section 3 of SBD KW-3 Others others createdTs version createdDate modifiedDate documentName None None None None Others -- others
tenderCriterionDocumentList	documentName optional documentTypeText PWD Company Registration Certificate True Technical Bid Annual Turnover Certificate with compulsory UDIN Number True Technical Bid Single similar nature of work done certificate issued by competent authority, not below the rank of Executive Engineer. True Technical Bid Line of credit from nationalised or Scheduled bank with bankers contact details True Technical Bid Recent tax clearance certificate True Technical Bid Other Kw-3 documents True Technical Bid Ongoing commitment details True Technical Bid Principal place of business details True Technical Bid
tenderWorkLocationList
tenderAddress	None
tenderRecallDTO	None