createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1709270210138 version 4 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 5000.00 emd 450000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 12-03-2024 16:00:00 tenderQueryClose 11-03-2024 17:30:00 technicalBidOpen 13-03-2024 16:30:00 publishedDate 04-03-2024 14:30:16 publishedByPost MI_EE_DIV_BGV publishedByUser KPE15432 - B M GURUBASAVARAJAIAH bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate 11-03-2024 11:00:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Mahadev B splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08312463850 mobileNumber 8312463850 tenderSupplierList None
tenderSchedule	createdTs 1709270210170 version 4 createdDate None modifiedDate None tenderNumber MI/2023-24/BB/WORK_INDENT1634 title Construction of Barrage cum Bridge across Javalu Halla near Kalahal village in Ramdurga Taluka, Dist-Belagavi (4702/2023-24) description Construction of Barrage cum Bridge across Javalu Halla near Kalahal village in Ramdurga Taluka, Dist-Belagavi (4702/2023-24) category WORKS categoryText Works ecv 29993745.02 deptName Minor Irrigation Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 121 locationName Minor Irrigation Division Belgaum provisionalAmount 30000000.0 groupOverheadTotal 4575317.04 fileNumber BGM/RMD/KALAHAL/BCB/4702/2023-24
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1709270210000 0 None None Bridge cum Barrages Components 25418427.98 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2866597 93370 None One Earth work excavation for Foundation by mechanical means for all works & depth as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m including Cost of labour, tools, usage of machinery & other appurtenances required to complete the work etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Ref : Para 3.1 to 3.1.11 and 1.1 to 1.17.1 of detailed Specification) In all kinds of soils Cum 102.0 102.0 6312.69 False None None False None False 643894.38 0 2866598 93370 None Two Earth work excavation for Foundation by mechanical means for all works & depth as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m including Cost of labour, tools, usage of machinery & other appurtenances required to complete the work etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Ref : Para 3.1 to 3.1.11 and 1.1 to 1.17.1 of detailed Specification) In ordinary/soft rock without blasting Cum 363.0 363.0 66.59 False None None False None False 24172.17 0 2866599 93370 None Three Providing rubble stone/boulder filling between or behind abutment below apron including cost of all materials, labour, hand packing, finishing top surface & all necessary works as directed and complete as per specification etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Ref : Para Tech Spn 2.5 to 2.9 of detailed Specification) Cum 1278.0 1278.0 510.94 False None None False None False 652981.32 0 2866600 93370 None Four Providing hearting / casing embankment using homogeneous approved soil from borrow areas in layers of 250 to 300 mm (before compaction) including cost of all materials, machinery, labour, all other operations such as collection of soil, spreading soil in layer of specified thickness, sorting out, breaking clods, levelling, sectioning edges / sides, watering, compacting each layer to density control of not less than 95 percent or as stipulated using power roller and all other ancillary operations etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Ref :Para 3.2 to 4.3.1 & Para 2.4.1 to 2.4.2 of detailed Specification) Cum 612.0 612.0 434.0 False None None False None False 265608.0 0 2866601 93370 None Five De-silting of Feeder Channel/Canal in dry condition by excavating the deposited bed material and disposing off the same by stacking/formation of Embankment or as directed including cost of allmachinery, labour & all necessary works as directed and etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Ref :Para 3.1 to 3.1.11 and 1.1 to 1.17.1 of detailed Specification) Cum 94.0 94.0 20500.0 False None None False None False 1927000.0 0 2866602 93370 None Six Providing and laying in-situ vibrated M-20 grade cement concrete using 40 mm down approved, clean, hard, graded aggregates for RCC works of gallery, sluice, spillway crest, spillway d / s face, energy dissipating structures, training walls, piers, abutments and such other locations including cost of all materials, machinery, labour, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing with all other ancillary operations complete etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge (Ref : Para 4.7 to 4.7.22 and 4.8 to 4.8.1 Sec II B 2.1 to 2.21 of detailed Specification) Cum 6254.0 6254.0 510.4 False None None False None False 3192041.6 0 2866603 93370 None Seven Providing and laying insitu vibrated M-20 ( 28 days cube compressive strength not less than 20 N / sq mm ) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, including cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, centering, formwork and scafolding and all other appurtenances required to complete the work as per technical specifications for check dam /pickups /irrigation tanks/waste weir/sluice, sluice canal and other allied works like abutments/wing walls/returns/cutoff walls works & all necessary works as directed and etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge (Ref : Para 4.7 to 4.7.22 and 4.8 to 4.8.1 Sec II B 2.1 to 2.21 of detailed Specification) Cum 7233.2 7233.2 342.5 False None None False None False 2477371.0 0 2866604 93370 None Eight Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specificationsetc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge (Ref : Para 4.7 to 4.7.22 and 4.8 to 4.8.1 Sec II B 2.1 to 2.21 of detailed Specification) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 6589.44 6589.44 1103.4 False None None False None False 7270788.096 0 2866605 93370 None Nine Providing and laying in position Cement Concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge (Ref : Para 4.7 to 4.7.22 and 4.8 to 4.8.1 Sec II B 2.1 to 2.21 of detailed Specification) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 7527.3 7527.3 171.4 False None None False None False 1290179.22 0 2866606 93370 None Ten Providing and laying in position Cement Concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge (Ref : Para 4.7 to 4.7.22 and 4.8 to 4.8.1 Sec II B 2.1 to 2.21 of detailed Specification) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 6843.0 6843.0 20.21 False None None False None False 138297.03 0 2866607 93370 None Eleven Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Ref : Para 4.8 to 4.8.1 to Sec II C 3.1 to 3.4 of detailed Specification) Kg 86.43 86.43 48301.68 False None None False None False 4174714.2024 0 2866608 93370 None Twelve Providing, Supplying and fixing M.S. gates of size with 6mm thick M.S. plate with and stiffeners (2 Nos) horizontal bracing 6 Nos. of ISMC 75*40 including providing rubber guard of ISA 20*4 for providing rubber of approved Quality for bottom & two sides fixed to grove of M.S. gate of size 25 mm . 25mm with machine screw nuts and bolts of size 6mm dia & 35mm long and providing 16mm dia MS bar handles (4 Nos) suitably welded to horizontal bracing including two coats of anticorrosive bituminous paint over a cost of primer complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Ref : Relevant IS & Para 4.1 & 4.2 of detailed Specification) Kg 173.0 173.0 15540.84 False None None False None False 2688565.32 0 2866609 93370 None Thirteen Providing and fixing M.S. Channel frame to suite the suitable size of gates. The side channels with suitable height with hold fasts 12mm dia and 0.5m long M.S. Bar at 0.50 m c/c with suitable size bottom channel including cost of all materials including two coats of anti corrosive paint over a coat of primer etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Ref : Relevant IS & Para 4.1 & 4.2 of detailed Specification) Kg 84.0 84.0 3183.88 False None None False None False 267445.92 0 2866610 93370 None Fourteen Providing and placing sand bags consisting of empty cement bags filled with 35 to 40 kg locally available sand for forming ring bund including plugging the joints with selected earth, cost of all labour, materials etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications) Each 68.0 68.0 1522.0 False None None False None False 103496.0 0 2866611 93370 None Fifteen Filling clayey soil between two rows of sand bags placed for forming ring bund including tamping, plugging leakage points etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications) Cum 482.0 482.0 26.46 False None None False None False 12753.72 0 2866612 93370 None Sixteen Providing and constructing 75 mm dia PVC pipe weep holes for concrete / masonry walls including providing 200 x 200 x 200 mm size porous concrete block made of cement and 20 mm down coarse aggregate in 1 : 4 proportion including 100 mm thick sand backing at the junction of wall and soil back fill, cost of all materials, machinery, labour etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications) m 337.0 337.0 160.0 False None None False None False 53920.0 0 2866613 93370 None Seventeen Providing and constructing 450 mm thick hand packed rough stone revetment consisting of 300 mm thick rough stones with 400 to 450 mm long through stones at 1.5 m c / c over a backing of 150 mm thick 40 mm down graded coarse aggregate layer including cost of all materials machinery, labour, laying to specified slope, wedging with chips, finishing & all necessary works as directed and etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Ref : Para 4.3 to 4.3.1 and Sec II C3.4 (i) of detailed Specification) Sqm 735.0 735.0 320.0 False None None False None False 235200.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1709270211000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1709270211000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1709270211000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1709270234000 0 None None ELIGIBILITY The Bidder shall ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of KPPP on or before the last date of bid submission. None 1709270240000 0 None None ELIGIBILITY The tenderer is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of KPPP portal due to internet connectivity issues and technical glitches at bidders end None 1709270244000 0 None None ELIGIBILITY EMD payments through e-payment mode shall be made as one single transaction and payments made in the part are liable for rejection. None 1709270248000 0 None None ELIGIBILITY The Tender are invited as per Standard Tender bid document KW-4 None 1709270252000 0 None None ELIGIBILITY Conditional Tenders will not be considered None 1709270257000 0 None None ELIGIBILITY All relevant documents as per the KW-4 need to be uploaded while submitting bid in general documents provision in KPPP portal. None 1709270261000 0 None None ELIGIBILITY The Employer reserves the right to accept or reject any of the tender without assigning any reason. None 1709270265000 0 None None ELIGIBILITY The contractor has make his own arrangements for procurement of all the required materials and the materials so procured shall confirm to the relevant IS Specifications or Equivalent and obtain necessary quality certificate from authorized quality control. None 1709270268000 0 None None ELIGIBILITY The Contractor is fully responsible for the Equipment / Material until the same is handed over to the EXECUTIVE ENGINEER in an operating condition after commissioning. The Contractor is responsible for the proper maintenance of equipment / material as well as protection of the same against theft, elements of nature, damages etc., while in his custody as well as after erection until the same is taken over by the EXECUTIVE ENGINEER under due acknowledgment in writing None 1709270272000 0 None None ELIGIBILITY All the documents required as per technical qualification criteria needed to be uploaded in Original or Attested by any official not below the rank of Executive Engineer or Notary None 1709270278000 0 None None ELIGIBILITY The Contractors should submit all the Documents as uploaded in Original or duly attested by a Notary/an officer not below the rank of an Executive Engineer on or before opening of Technical Bid as Notified. None 1709270284000 0 None None ELIGIBILITY Name, address, and telephone, telex, and fax numbers of the contractor is to be provided None 1709270289000 0 None None ELIGIBILITY The contractor has to furnish Additional security deposit for unbalance tender as per clause 29.1 of ITT, to an amount equal to difference in contract price and amount put to tender, in addition to 5% performance guarantee (in any of the form prescribed) while concluding the Agreement. None 1709270296000 0 None None ELIGIBILITY Unique Document Identification Number (UDIN) from Practicing Chartered Accountant is preferred in Annual Turn over None 1709270302000 0 None None ELIGIBILITY The intending bidders are advised to visit the site of work and make themselves familiar with the local situation regarding the availability of the construction materials, workmen, land required for construction activities etc. None 1709270306000 0 None None ELIGIBILITY The tenderer shall also disclose if there are any bankruptcy proceedings against him. None 1709270310000 0 None None ELIGIBILITY The Contractor shall provide work program as per Clause 25 under the chapter Time control of conditions of contract. The contractor should adhere to the accepted execution plan submitted by him under any circumstances without linking to the pending payment of the work. None 1709270315000 0 None None ELIGIBILITY During the execution of the works, if any minor minerals are required, contractors have to abide by the Karnataka Minor Mineral Concession Rules 1994 (as amended up to date). As per the prevailing rules for any use of minor minerals the contractor has to submit the Mineral Dispatch Permit obtained from Mines and Geology Department. If Mineral Dispatch Permit (MDP) is not submitted by the contractor along with the bill, the prevailing penalty and DMF contribution as per Karnataka Minor Mineral Concession Rules 1994 ( as amended from time to time) will be deducted from the contractors bill at the time of payment None 1709270321000 0 None None ELIGIBILITY The Work Done Certificates shall be issued by the Executive Engineer (if work done in Karnataka State), otherwise it shall be issued/ counter signed by Superintending Engineer (if work is done in other states) None 1709270326000 0 None None ELIGIBILITY A copy of GST registration certificate should be uploaded None 1709270347000 0 None None ELIGIBILITY The contractor shall quote the rates without adding GST for either materials or works contract (Service). GST payable by the contractor under this works contract will be paid to the contractor separately over and above the contractor s bid amount. The increase if any in the GST shall not be paid in the extended period of Contract for which the Contractor alone is responsible for delay as determined by the Authority None 1709270352000 0 None None ELIGIBILITY Estimate rates are excluding GST as per Common SR 2023-24 and prevailing GST (18 Percent of Amount put to Tender) amount is kept in form of Overhead sum in sanctioned estimate. According to guidelines in Common SR Amount put to tender and ECV amount are including GST. KPPP Portal format has No Options to add GST separately. The item wise rates do not include GST. Hence, GST will be paid separately for the quoted amount accordingly. Declaration Certificate must be attached mandatorily None 1709270357000 0 None None ELIGIBILITY For Works estimate cost more than Rs. 100.00 Lakhs : For Quality control tests of materials the contractor should provide required Rammer with Core Cutter, Balance and Moisture Meter, size 15x15x15 cms Mould Sets and for testing of sand and metal set of required mesh etc. None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx) None None None None None None Total value of civl engineering works executed and payments received in the last five years (year-wise) None None None None None None List of works for which tenders already submitted None None None None None None Banker Details for reference None None None None None None Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded None None None None None None Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years None None None None None None Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded None None None None None None List of Financial Resources with Certificates None None None None None None Satisfactorily completed (at least 90% of the Contract value), in last five years i.e. 2018-19 to 2022-23as prime contractor, at least one similar work such as Construction of Bandhara/Barrage/BCB work to an extent of 50percent of the cost of the work Rs.150.00 Lakhs. Work Done Certificates shall be issued by the Executive Engineer (if work done in Karnataka State), otherwise it shall be issued / counter signed by Superintending Engineer(if the work is done in other states) Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Executed in any one year, the following minimum quantities of work-Excavation and Embankment (combined quantities)-5500.00 Cum, Cement concrete (including RCC, PCC and PSC) 1800.00 Cum, Steel works for RCC (Reinforcement Steel) 38700.00 Kgs, Steel Gates (Fabrication) 15000.00 Kgs, De-silting-16400.00 Cum Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- Work done certificate showing quantities of different items executed None None None None Should have been registered as Class-I Contractor in PWD Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Class-I PWD Registration Certificate None None None None A Copy of GST Registration Certificate Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None GST Registration None None None None Income Tax :Latest copy of the Income Tax Clearance Certificate and Sale Tax Clearance PAN and TAN Nos. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- PAN & TAN Certificate None None None None Estimate rates are excluding GST as per Common SR 2023-24 and prevailing GST (18 Percent of Amount put to Tender) amount is kept in form of Overhead sum in sanctioned estimate. According to guidelines in Common SR Amount put to tender and ECV amount are including GST. KPPP Portal format has No Options to add GST separately. The item wise rates do not include GST. Hence, GST will be paid separately for the quoted amount accordingly. Declaration Certificate must be attached mandatorily Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Declaration Certificate None None None None 3.2 To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e. (2018-19, 2019-20, 2020-21, 2021-22, 2022-23)(a) Achieved in at least two financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs.600.00 Lakhs. Financial turnover of previous years will be given a weightage of 10% per year to bring them to price level of FY 2023-24 Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Liquid assets and /or availability of credit facilities of no less than Rs.100.00 Lakhs (Credit lines/letter of credit/ certificates from banks) for meeting the fund requirement etc. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit None None None None Assessed available tender capacity (AxNx1.50 - B) Where A- Maximum value of civil engineering works executed in any one year during the last five years (updated to 2023-24 price level) taking into account the completed as well as works in progress. Tender Inviting Authority N - Number of years prescribed for completion of the works for which Tenders are invited. B - Value, at 2023-24 price level, of existing commitments and on-going works to be completed during the next 9/12 years (period of completion of the works for which Tenders are invited) Note- The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Others -- Work in hand
tenderCriterionDocumentList	documentName optional documentTypeText Annual Turnover Certificate with Profit & Loss Account statement as per KW-4 Qualification of The Tenderer True Technical Bid Company / Contractor Registration Certificate True Technical Bid Work done certificate as per KW-4 Qualification of The Tenderer True Technical Bid Work done certificate showing quantities of different items executed True Technical Bid Bank credit certificate as per KW-4 Qualification of The Tenderer True Technical Bid Work in Hand as per KW-4 Qualification of The Tenderer True Technical Bid GST registration Certificate True Technical Bid PAN & TAN Certificate True Technical Bid Scanned signature of the bidder/representative to be attached while uploading the bid document True Technical Bid GST Declaration Certificate True Technical Bid
tenderWorkLocationList
tenderAddress	createdTs 1709373866000 version 0 createdDate None modifiedDate None blockNumber O/o. Executive Engineer MI GWDD Dvn Belagavi street None city Belagavi state Karnataka pin 590003
tenderRecallDTO	None