| 1709538015000 | 0 | None | None | Buildings | Construction of 2 rooms to Govt PU college at Upparigenahalli village in Holalkere Taluk | 4190124.96 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2901528 | 95269 | None | Vol.I, 1.12 | Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery &other appurtenances required to complete the In all kinds of soils upto 300 mm depth work .(P.NO 8.I.NO 1.12 PWDCSR 2023-24Volume I) | Cum | 95.0 | 95.0 | 67.5 | False | None | None | False | None | False | 6412.5 | 0 | | 2901529 | 95269 | None | Vol.I, 1.14.1 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m(P.NO 8.I.NO 1.14.1 PWDCSR 2023-24Volume I) | Cum | 102.0 | 102.0 | 137.96 | False | None | None | False | None | False | 14071.92 | 0 | | 2901530 | 95269 | None | Vol.I, 2.1.2 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates (P.NO 15.I.NO 2.1.2 PWDCSR 2023-24 Volume I) | Cum | 5664.0 | 5664.0 | 17.67 | False | None | None | False | None | False | 100082.88 | 0 | | 2901531 | 95269 | None | Vol.I, 2.2.3 | Providing and laying in position Cement Concrete for all Foundation works. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (P.NO 15.I.NO 2.2.3 PWDCSR Volume I 2023-24) for column footing. | Cum | 6652.8 | 6652.8 | 30.28 | False | None | None | False | None | False | 201446.784 | 0 | | 2901532 | 95269 | None | Vol.I, 2.2.3 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (P.NO 15.I.NO 2.2.3 PWDCSR Volume I 2023-24) for column upto GL | Cum | 10771.2 | 10771.2 | 2.04 | False | None | None | False | None | False | 21973.248 | 0 | | 2901533 | 95269 | None | Vol.II, 5.3 | Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) ( P.NO 9.I.NO 5.3 PWDCSR 2023-24 Volme II ) | Cum | 6205.0 | 6205.0 | 34.77 | False | None | None | False | None | False | 215747.85 | 0 | | 2901534 | 95269 | None | Vol.II, 5.4 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) ( P.NO 9.I.NO 5.4 PWDCSR 2023-24 Volme II ) | Cum | 6389.0 | 6389.0 | 17.39 | False | None | None | False | None | False | 111104.71 | 0 | | 2901535 | 95269 | None | Vol.I, 2.3.2 | Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (P.NO 16.I.NO 2.3.2 PWDCSR Volme I) 2023-24 for column footing. | Cum | 11016.0 | 11016.0 | 1.05 | False | None | None | False | None | False | 11566.8 | 0 | | 2901536 | 95269 | None | Vol.I, 2.3.2 | Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (P.NO 16.I.NO 2.3.2 PWDCSR Volme I) 2023-24 for plinth beam. | Cum | 9720.0 | 9720.0 | 11.28 | False | None | None | False | None | False | 109641.6 | 0 | | 2901537 | 95269 | None | Vol.I, 2.11 a | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings ( P. NO 18.I.NO 2.11 a PWDCSR 2023-24 Volme I ) | t | 89457.0 | 89457.0 | 2.5 | False | None | None | False | None | False | 223642.5 | 0 | | 2901538 | 95269 | None | Vol.II, 8.3.1 | Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/ stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.( P.NO 41.I.NO 8.3.1 PWDCSR 2023-24 Volme II ) | Sqm | 354.0 | 354.0 | 57.7 | False | None | None | False | None | False | 20425.8 | 0 | | 2901539 | 95269 | None | Vol.I, 1.9 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.( P.NO 34.I.NO 1.9 PWDCSR 2023-24 Volme I) | Cum | 266.0 | 266.0 | 137.96 | False | None | None | False | None | False | 36697.36 | 0 | | 2901540 | 95269 | None | Vol.I, 1.9 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.( P.NO 34.I.NO 1.9 PWDCSR 2023-24 Volme I) | Cum | 450.3 | 450.3 | 49.75 | False | None | None | False | None | False | 22402.425 | 0 | | 2901541 | 95269 | None | Vol.II, 6.8 | SUPER STRUCTURE : Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.(P.NO.14.I.NO 6.8 PWD SR 2023-24 Volme II) | Cum | 7969.0 | 7969.0 | 65.08 | False | None | None | False | None | False | 518622.52 | 0 | | 2901542 | 95269 | None | Vol.I, 2.1.6 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates (P.NO 15.I.NO 2.1.6 PWDCSR Volme I 2023-24) | Cum | 6243.0 | 6243.0 | 3.97 | False | None | None | False | None | False | 24784.71 | 0 | | 2901543 | 95269 | None | Vol.II, 11.32 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.(P.NO.84.I.NO.11.32 PWD SR 2023-24Volme II). for columns | Cum | 11633.1 | 11633.1 | 8.29 | False | None | None | False | None | False | 96438.399 | 0 | | 2901544 | 95269 | None | Vol.II, 11.32 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.(P.NO.84.I.NO.11.32 PWD SR 2023-24Volme II) for lingel and roof beam. | Cum | 10948.0 | 10948.0 | 14.95 | False | None | None | False | None | False | 163672.6 | 0 | | 2901545 | 95269 | None | Vol.II, 11.32 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (P.NO.84.I.NO.11.32 PWD SR 2023-24Volme II) for Slab | Cum | 10264.5 | 10264.5 | 36.74 | False | None | None | False | None | False | 377117.73 | 0 | | 2901546 | 95269 | None | Vol.II, 11.32 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.(P.NO.84.I.NO.11.32 PWD SR 2023-24Volme II) | Cum | 9922.35 | 9922.35 | 0.65 | False | None | None | False | None | False | 6449.5275 | 0 | | 2901547 | 95269 | None | Vol.II, 2.11 | Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire/soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings (P.NO.18.I.NO.2.11 a PWD SR 2023-24 Volme II) | MT | 89457.0 | 89457.0 | 5.74 | False | None | None | False | None | False | 513483.18 | 0 | | 2901548 | 95269 | None | Vol.II, 11.3 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including cost of materials ,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in Charge.(P.NO.77.I.NO.11.3 PWD SR 2023-24 Volme II) | Sqm | 8276.0 | 8276.0 | 6.3 | False | None | None | False | None | False | 52138.8 | 0 | | 2901549 | 95269 | None | Vol.II, 11.34.A | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in Charge. (P.NO.85. I.NO.11.34.A PWD SR 2023-24 Volme II) | Sqm | 4478.0 | 4478.0 | 28.26 | False | None | None | False | None | False | 126548.28 | 0 | | 2901550 | 95269 | None | Vol.I, 11.34.A | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding (P.NO 86.I.NO 11.34 A PWDCSR Volme I) | Kg | 168.0 | 168.0 | 435.0 | False | None | None | False | None | False | 73080.0 | 0 | | 2901551 | 95269 | None | Vol.I, 2.1.2 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead and lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1 4 8 Using 40 mm nominal size graded crushed coarse aggregates (P.NO.15.I.NO.2.1.2 PWD SR 2023-24 Volume I) | Cum | 5664.0 | 5664.0 | 16.03 | False | None | None | False | None | False | 90793.92 | 0 | | 2901552 | 95269 | None | Vol.II, 9.34 | Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1 6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing, polishing complete as per specifications. (P.NO.64.I.NO.9.34 PWD SR 2023-24 Volume II) | Sqm | 1545.0 | 1545.0 | 236.56 | False | None | None | False | None | False | 365485.2 | 0 | | 2901553 | 95269 | None | Vol.II, 9.31 | Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 20 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.(P.NO.64.I.NO.9.31 PWD SR 2023-24 Volume II) | Sqm | 2085.0 | 2085.0 | 8.3 | False | None | None | False | None | False | 17305.5 | 0 | | 2901554 | 95269 | None | Vol.II, 8.4.2 | Providing 12 mm cement plaster finished with a floating coat of neat cement of mix 1 4 (1cement 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge (P.NO.41.I.NO.8.4.2 PWD SR 2023-24 Volme II)
| Sqm | 312.0 | 312.0 | 362.29 | False | None | None | False | None | False | 113034.48 | 0 | | 2901555 | 95269 | None | Vol.II, 8.5.2 | Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 14 (1cement 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(P.NO.42.I.NO.8.5.2 PWD SR 2023-24 Volme II) | Sqm | 349.0 | 349.0 | 436.62 | False | None | None | False | None | False | 152380.38 | 0 | | 2901556 | 95269 | None | Vol.II, 8.25 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (P.NO.45.I.NO.8.25 PWD SR 2023-24 Volme II) | Sqm | 137.0 | 137.0 | 560.1 | False | None | None | False | None | False | 76733.7 | 0 | | 2901557 | 95269 | None | Vol.II, 8.27 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(P.NO.45.I.NO.8.27 PWD SR 2023-24 Volme II)
| Sqm | 53.0 | 53.0 | 511.6 | False | None | None | False | None | False | 27114.8 | 0 | | 2901558 | 95269 | None | Vol.II, 8.28 | Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (P.NO.45.I.NO.8.28 PWD SR 2023-24 Volme II) | Sqm | 89.0 | 89.0 | 511.6 | False | None | None | False | None | False | 45532.4 | 0 | | 2901559 | 95269 | None | Vol.II, 8.40 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(P.NO.48.I.NO.8.40 PWD SR 2023-24 Volme II) | Sqm | 115.0 | 115.0 | 52.38 | False | None | None | False | None | False | 6023.7 | 0 | | 2901560 | 95269 | None | Vol.II, 13.64.2 | Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 110mm nominal dia pipes (P.NO.128.I.NO. 13.64.2 PWD SR 2023-24 Volme II) | Mtr | 385.0 | 385.0 | 36.0 | False | None | None | False | None | False | 13860.0 | 0 | | 2901561 | 95269 | None | Vol.II, 11.26.1 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.( P.NO 84.I.NO 11.26.1 PWDCSR 2023-24 Volume II)
| Kg | 138.0 | 138.0 | 285.0 | False | None | None | False | None | False | 39330.0 | 0 | | 2901562 | 95269 | None | Vol.II, 8.84 | Providing wall black boards in 12mm thick with CM 1 3 and applied with primer & two coats of acrylic emulsion black paint including finishing etc.,complete.( P.NO 55.I.NO 8.84 PWDCSR 2023-24 Volume II) | Sqm | 475.0 | 475.0 | 14.4 | False | None | None | False | None | False | 6840.0 | 0 | | 2901563 | 95269 | None | Vol.II, 7.38 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (0.05percentage) total coated thickness with zinc coating 120 g/m2 as per IS 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineerin-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (P.NO.26.I.NO.7.38 PWD SR 2023-24 Volme II) | Sqm | 568.0 | 568.0 | 27.68 | False | None | None | False | None | False | 15722.24 | 0 | | 2901564 | 95269 | None | Vol.II, 11.16.2 | Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (P.NO.82.I.NO.11.16.2 PWD SR 2023-24 Volme II) | Kg | 147.0 | 147.0 | 100.0 | False | None | None | False | None | False | 14700.0 | 0 | | 2901565 | 95269 | None | Vol.II, 8.16a | Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup boards including cost of all materials, labour, providing and removing form work usage charges, curing, complete as per specifications. (P.NO.44 .I.NO.8.16.a PWD SR 2023-24 Volme II) | Sqm | 1238.0 | 1238.0 | 34.54 | False | None | None | False | None | False | 42760.52 | 0 | | 2901566 | 95269 | None | Eltrcl, 1.2.2 | Electrical Works : Supplying heavy gauge PVC conduit pipe mm dia25mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 25 mm dia 2 mm thick ( P No 2/105 It no 1.2.2 ) Electrical SR 2023-24 | Mtr | 78.0 | 78.0 | 100.0 | False | None | None | False | None | False | 7800.0 | 0 | | 2901567 | 95269 | None | Eltrcl, 1.1.2 | Supplying heavy gauge PVC conduit pipe . dia mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws 19/20 mm dia 2 mm thick ( P No 2/105 It no 1.1.2 ) Electrical SR 2023-24 | Sqm | 81.0 | 81.0 | 75.0 | False | None | None | False | None | False | 6075.0 | 0 | | 2901568 | 95269 | None | Eltrcl, 1.4.7 | Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.200 x200 mm ( P No 2/105 It no 1.4.7 ) Electrical SR 2023-24 | Each | 348.0 | 348.0 | 6.0 | False | None | None | False | None | False | 2088.0 | 0 | | 2901569 | 95269 | None | Eltrcl, 1.5.1 | Supplying and fixing PVC/metal conduit Deep junction box 19/20 mm deep Junction box ( P No 2/105 It no 1.5.1 ) Electrical SR 2023-24 | Each | 49.0 | 49.0 | 25.0 | False | None | None | False | None | False | 1225.0 | 0 | | 2901570 | 95269 | None | Eltrcl, 2.1.1 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.Short point upto 3m from tapping point to out let via switch ( P No 6/105 It no 2.1.1 ) Electrical SR 2023-24 | Each | 285.0 | 285.0 | 12.0 | False | None | None | False | None | False | 3420.0 | 0 | | 2901571 | 95269 | None | Eltrcl, 2.1.2 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.Short point upto 3m from tapping point to out let via switch Medium point above 3m upto 6m from tapping point to out let via switch ( P No 6/105 It no 2.1.2 ) Electrical SR 2023-24
| Each | 394.0 | 394.0 | 10.0 | False | None | None | False | None | False | 3940.0 | 0 | | 2901572 | 95269 | None | Eltrcl, 2.1.3 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.Short point upto 3m from tapping point to out let via switch Medium point above 3m upto 6m from tapping point to out let via switch Long point above 6m upto 10m from tapping point to out let via switch ( P No 6/105 It no 2.1.3 ) Electrical SR 2023-24 | Each | 570.0 | 570.0 | 5.0 | False | None | None | False | None | False | 2850.0 | 0 | | 2901573 | 95269 | None | Eltrcl, 3.6.3 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Three Way socket ( P No 9/105 It no 3.6.3 ) Electrical SR 2023-24 | Each | 171.0 | 171.0 | 4.0 | False | None | None | False | None | False | 684.0 | 0 | | 2901574 | 95269 | None | Eltrcl, 3.6.9 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch ( P No 9/105 It no 3.6.9 ) Electrical SR 2023-24
| Each | 326.0 | 326.0 | 2.0 | False | None | None | False | None | False | 652.0 | 0 | | 2901575 | 95269 | None | Eltrcl, 3.8 | Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc, and fixing on existing wooden or metal box using N.F. screws. ( P No 9/105 It no 3.8 ) Electrical SR 2022-23
| Sqm | 0.41 | 0.41 | 2400.0 | False | None | None | False | None | False | 984.0 | 0 | | 2901576 | 95269 | None | Eltrcl, 5.19.5 | Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.16 Way SP & N ( P No 17/105 It no 5.19.5) Electrical SR 2023-24 | Each | 2932.0 | 2932.0 | 2.0 | False | None | None | False | None | False | 5864.0 | 0 | | 2901577 | 95269 | None | Eltrcl, 5.20.4 | Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker (ELMCB) 240/450V upto 300mA sensitivity on existing wood/panel board.63 A 4 pole ( P No 18/105 It no 5.20.4) Electrical SR 2023-24 | Each | 4559.0 | 4559.0 | 2.0 | False | None | None | False | None | False | 9118.0 | 0 | | 2901578 | 95269 | None | Eltrcl,11.11.7 | Supplying & fixing retrofit type-PL- LED Lamp W LED linear source with CCT 6500 degree K, CRI 70. Efficacy 80 lumen per W, life 25000 burning hours and Compliance to IS10322/IEC 60598, LM 79 LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5 of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20, Life as per LM 79. The operating input voltage should be between 130 to 275 V. Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. (P No 47/105 It no11.11.7) Electrical SR 2023-24) | Each | 426.0 | 426.0 | 15.0 | False | None | None | False | None | False | 6390.0 | 0 | | 2901579 | 95269 | None | Eltrcl, 13.5 | Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clA, bolts, nuts and wiring using suitable capacity wires. (P No 56/105 It no13.5) Electrical SR 2023-24 | Each | 162.0 | 162.0 | 15.0 | False | None | None | False | None | False | 2430.0 | 0 | | 2901580 | 95269 | None | Eltrcl,2.3.1 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 1 mm2 (P No 5/105 It no 2.3.1) Electrical SR 2023-24 | Mtr | 19.0 | 19.0 | 200.0 | False | None | None | False | None | False | 3800.0 | 0 | | 2901581 | 95269 | None | Eltrcl, 6.3.2 | Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system. 56" Sweep (1400 mm) Regular model (P No 13/105 It no 6.3.2) Electrical SR 2023-24 | Each | 3031.0 | 3031.0 | 10.0 | False | None | None | False | None | False | 30310.0 | 0 | | 2901582 | 95269 | None | Eltrcl, 6.4.1 | Supplying of Ceiling Fan with Capacitor rating As per guide line of BEE 5star rating and IS:374/19 and also comply with IS:1709/1984 with latest amendment, Rated voltage 220V/50Hz, Rated power upto 35W+/- %,Rated current As per IS:374/19, Rated power factor 0.9 lagging(min),Rated speed 350+/-10%RPM,Rate dair delivery210+/-10% Cubic Meter Minimum, Rated service value 6.2CMM/W,Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball earings, Top6202, Bottom6201,asper Sspecification, Motorwinding. Temprise Shall not exceed 75deg Cover and ambient of 400 C by resistance method at 245V, Insulation resistance Shall not be less than Two Mega Ohms (2MOhms), Leakage current Should not exceed 210 Micro Amp, Power input, W¤t, AirDelivery & Fan Speed asperIS:374/2019 with latest amendment, 2year manufacturer Warranty. (BLDC fans) 48" Sweep 5 Star (1200 mm) ( P No 30 It no 6.4.1 ) Electrical SR 2023-24 | Each | 2677.0 | 2677.0 | 6.0 | False | None | None | False | None | False | 16062.0 | 0 | | 2901583 | 95269 | None | Eltrcl, 2.3.2 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 1 mm2 1.5 mm2 ( P No 5/105 It no 2.3.2 ) Electrical SR 2023-24 | Mtr | 26.0 | 26.0 | 80.0 | False | None | None | False | None | False | 2080.0 | 0 | | 2901584 | 95269 | None | Eltrcl, 2.3.3 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 1 mm22.5 mm2 ( P No 5/105 It no 2.3.3) Electrical SR 2023-24 | Mtr | 42.0 | 42.0 | 50.0 | False | None | None | False | None | False | 2100.0 | 0 | | 2901585 | 95269 | None | Eltrcl, 2.3.4 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multi strand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 4mm2 ( P No 5/105 It no 2.3.4) Electrical SR 2023-24 | Mtr | 63.0 | 63.0 | 35.0 | False | None | None | False | None | False | 2205.0 | 0 | | 2901586 | 95269 | None | Eltrcl,5.18.3 | Supplying & fixing mini ature circuit breaker son existing MCB distribution boards using necessary fixing material sand 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10 K and complete wiring as required confirming to IEC 60898. 50-63 A SP ( P No 17 It no 5.18.3) Electrical SR 2023-24 | Each | 811.0 | 811.0 | 1.0 | False | None | None | False | None | False | 811.0 | 0 | | 2901587 | 95269 | None | Eltrcl, 5.19.4 | Supplying and fixing regular MCB distribution board on wall/woodboard/ flush mounting using required clamps, bolts, nutsetc., with provision for fixing suitable type capacity MCB using phase/ 3phase/ single door with powder coated painting Made out of 14SWGMS enclosure. I - Single Door12 Way SP & N ( P No 18 It no 5.19.4) Electrical SR 2023-24 | Each | 1863.0 | 1863.0 | 2.0 | False | None | None | False | None | False | 3726.0 | 0 | | 2901588 | 95269 | None | Eltrcl, 13.10 | Fixing a ceiling Wall mounting fan of all capacities and all types to the existing S hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring. ( P No 57/105 It no13.10) Electrical SR 2023-24 | Each | 171.0 | 171.0 | 2.0 | False | None | None | False | None | False | 342.0 | 0 |
|