createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1709108766646 version 3 createdDate None modifiedDate None tenderType RFQ evaluationType ONE_COVER evaluationTypeText One Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 500.00 emd 37500.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 19-03-2024 16:00:00 tenderQueryClose 19-03-2024 15:00:00 technicalBidOpen None publishedDate 05-03-2024 18:49:28 publishedByPost RDPR_EE_DIV_DWD publishedByUser KPE14049 - KRISHNAMURTHY B CHATE bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate None preBidMeetingYn False preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson K.B.Chate splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08362442316 mobileNumber None tenderSupplierList None
tenderSchedule	createdTs 1709108766690 version 4 createdDate None modifiedDate None tenderNumber RDPR/2023-24/BD/WORK_INDENT3490 title Construction of Aganwadi No.2 in Betadur Village in Kundagol taluk Dharwad District description Construction of Anganavadi category WORKS categoryText Works ecv 1495649.29 deptName Rural Development and Panchayat Raj Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 843 locationName RDPR Division Office Daharwad provisionalAmount 1500000.0 groupOverheadTotal 228150.0 fileNumber aeepredsubkundgol/betadur/2023-24/
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1709108767000 0 None None Buildings Construction of Aganwadi No.2 in Betadur Village in Kundagol taluk Dharwad District 1267499.29 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2837461 91958 None 1.0 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth Cum 65.0 65.0 23.3 False None None False None False 1514.5 0 2837462 91958 None 2.0 Earth work excavation by manual means for drains,canals, waste weir,draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in aradius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m Cum 186.0 186.0 78.4 False None None False None False 14582.4 0 2837463 91958 None 3.0 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates Cum 5206.0 5206.0 19.93 False None None False None False 103755.58 0 2837464 91958 None 4.0 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 5943.0 5943.0 17.02 False None None False None False 101149.86 0 2837465 91958 None 5.0 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 6182.0 6182.0 26.07 False None None False None False 161164.74 0 2837466 91958 None 6.0 Providing Thermo-Mechanically Treated bars of grade Fe-550 or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) Kg 83.0 83.0 3362.1 False None None False None False 279054.3 0 2837467 91958 None 7(a) Additionalities for Formwork, Centering & Scaffolding for column footing & colm up to GL Cum 178.29 178.29 17.02 False None None False None False 3034.4958 0 2837468 91958 None 7(b) Additionalities for Formwork, Centering & Scaffolding for column Cum 618.2 618.2 3.72 False None None False None False 2299.704 0 2837469 91958 None 7(c) Additionalities for Formwork, Centering & Scaffolding for Beam & Lintel Cum 1236.4 1236.4 11.68 False None None False None False 14441.152 0 2837470 91958 None 7(d) Additionalities for Formwork, Centering & Scaffolding for Chajja Cum 2781.9 2781.9 1.0 False None None False None False 2781.9 0 2837471 91958 None 7(e) Additionalities for Formwork, Centering & Scaffolding for Slab Cum 1236.4 1236.4 9.67 False None None False None False 11955.988 0 2837472 91958 None 8.0 Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 5543.0 5543.0 37.56 False None None False None False 208195.08 0 2837473 91958 None 9.0 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates Cum 5728.0 5728.0 2.16 False None None False None False 12372.48 0 2837474 91958 None 10.0 Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m Cum 204.0 204.0 44.81 False None None False None False 9141.24 0 2837475 91958 None 11.0 Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m. Including cost of all labour complete as per specifications Cum 122.0 122.0 27.06 False None None False None False 3301.32 0 2837476 91958 None 12.0 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work Cum 6696.0 6696.0 31.46 False None None False None False 210656.16 0 2837477 91958 None 13.0 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 832.0 832.0 2.37 False None None False None False 1971.84 0 2837478 91958 None 14.0 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A , including jointing with seal ring conforming to IS :5382,leaving 10mm gap for thermal expnsion ,(i) Single socketed pipes .100 mm m 253.0 253.0 20.0 False None None False None False 5060.0 0 2837479 91958 None 15.0 Providing and fixing rectangular high density polyethyelne water storage loft tank with cover, conforming to ISI: 12701, colour of opaque white or as approved by Engineer-in-charge.The Rate includes making necessary holes for inlet,outlet & over flow pipes. The base support i/c fittigs &fixtures for tank shall be paid separately. Ltr 8.5 8.5 1000.0 False None None False None False 8500.0 0 2837480 91958 None 16.0 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 307.0 307.0 69.45 False None None False None False 21321.15 0 2837481 91958 None 17.0 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 230.0 230.0 219.92 False None None False None False 50581.6 0 2837482 91958 None 18.0 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete. Sqm 1102.0 1102.0 36.9 False None None False None False 40663.8 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1709108768000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1709108768000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1709108768000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1709108768000 0 None None ELIGIBILITY Department Registration Details None 1709108768000 0 None None ELIGIBILITY Total value of civl engineering works executed and payments received in the last five years (year-wise) None 1709108768000 0 None None ELIGIBILITY List of existing commitments and ongoing work None 1709108768000 0 None None ELIGIBILITY List of works for which tenders already submitted None 1709108768000 0 None None ELIGIBILITY Banker Details None 1709108795000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1709108801000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government Karnataka None 1709108948000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of KPPP portal on or before the last date and time of bid submission. None 1709108960000 0 None None ELIGIBILITY The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of KPPP portal due to internet connectivity issues and technical glitches at bidders end. None 1709108967000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1709108982000 0 None None ELIGIBILITY Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder. None 1709108996000 0 None None ELIGIBILITY Tender schedule will be issued against the e-Payment / NEFT / Credit Card / Debit Card / OTC. None 1709109012000 0 None None ELIGIBILITY Any damage during the progress of work, the damage cost should be beared by the contractor. None 1709109039000 0 None None ELIGIBILITY Any addition / Ommission / alteration will be reserved by the under signed None 1709109042000 0 None None ELIGIBILITY Tender processing fee will not be refundable or exchangeable in case of cancellation of tender None 1709109072000 0 None None ELIGIBILITY Cost of 1% will be deducted from the bill towards labour welfare fund as per GO: LD 300 LET 2006 Dated: 18-01-2007 None 1709109103000 0 None None ELIGIBILITY All materials should be in good quality as per specification, quality certificate for the same should be obtained from the concerned authority at their own cost. None 1709109112000 0 None None ELIGIBILITY Quality Control certificate issued from the QC authority must accompanied with bill None 1709109121000 0 None None ELIGIBILITY Acceptance / Cancellation of the tenders are reserved by under signed without any reasons for the same. None 1709109130000 0 None None ELIGIBILITY The work should be carried out in accordance with the standard specifications specified by the department. The defect liability period for all these works shall not be less than 1 year & the contractor shall have to give guarantee for 1 year maintenance. None 1709109138000 0 None None ELIGIBILITY The rates quoted by contractor shall include for structural design & drawing duly certified by the competent authority. The Tenderer whose tender is accepted shall furnish within 15 days the structural design & drawings in 3 set for scrutining to the competent authority. The contractor shall furnish 3 sets of design & drawings (approved) to the Engineer-in-charge and keep one set at site of work. The safe bearing capacity shall be got tested before submission of the drawings. None 1709109147000 0 None None ELIGIBILITY If the rates quoted by the Contractor are lesser than the amount put to tender, the difference cost should be paid by the contractor, through DD / FDR / NSC in the favour of Executive Engineer at the time of Agreement None 1709109160000 0 None None ELIGIBILITY The Contractor should enclose / attach all the necessary certificates duly attested by the Notary. None 1709109167000 0 None None ELIGIBILITY Tenderer should upload works in hand certificate. None 1709109181000 0 None None ELIGIBILITY The Contractor shall quote the rates without adding GST for either materials or works contract Service. GST payable by the Contractor under this works contract will be paid to the contractor separately over the contractors bid amount as per Govt order No PWD 65 RDF 2017, dtd: 11-10-2018 None 1709109189000 0 None None ELIGIBILITY Contractor should upload the KPWD registration renewal copy. None 1709109204000 0 None None ELIGIBILITY Tender should be rejected if the works not completed in time or stipulated time from any Department in previous years. None 1709109217000 0 None None ELIGIBILITY Contractor should obey with the above conditions in addition to the KW-1. None 1709109434000 0 None None ELIGIBILITY Contractor should make an agreement within 07 days of tender acceptance date and work should be carried out with in the 1 week time after agreement. If not tender will be cancelled at the contractors own risk and cost None 1709109455000 0 None None ELIGIBILITY In last five years (i.e., 2018-19 to 2022-23) Satisfactorily completed as a prime contractor for at least one similar nature of work done 50% of the cost of the work i.e., not less than the amount Rs.7.48 lakhs, certificate issued from the rank of Executive Engineer and above for the same should be furnished by the contractor. None 1709109480000 1 None None ELIGIBILITY Period for Completion of the work 6 months. None 1709109505000 0 None None ELIGIBILITY To qualify for award of this contract each tenderer in his name should have in the last five years period (i.e., 2018-19 to 2022-23) Turnover Certificate obtained from Charted Accountant and achieved in at least two financial years an average Annual Financial Turnover (in all classes of civil Engineering construction works only) of Rs. 14,95,649.29 (usually not less than the estimated cost under this contract None 1709109523000 0 None None ELIGIBILITY Liquid assets and /or availability of credit facilities of not less than Rs. 4.49 lakhs (30% of amount put to tender) (Credit lines/ letter of credit/ certificates from Nationalized banks for meeting the fund requirement etc.) for particularly this work only. (Unconditional) None 1709109534000 0 None None ELIGIBILITY Security deposit at the rate of 5% of tender cost should be made in favour of Executive Engineer in the form of DD / FDR / NSC (NSC should be fledge in the name of Executive Engineer) None 1709109543000 0 None None ELIGIBILITY Contractor should not quote above SR Rate. None 1709644345000 0 None None ELIGIBILITY To qualify for award of this contract, each Tenderer in its name should have in the last five years Executed in any one year, the following minimum 80 Perc quantities of work in last five years 1. RCC-PCC-52.144 Cum 2. Steel-2690 Kg 3. Rubble Masonry-30.048 Cum 4. BBM 33.83 Cum 5. Plastering-231.496 Sqm 6. Flooring- 29.52 Sqm None
preQualCriterionList	None
technicalCriterionList	None
tenderCriterionDocumentList	documentName optional documentTypeText Contractor should upload KPWD renewal registration copy. True Technical Bid To qualify for award of this contract each tenderer in his name should have in the last five years period that is 2018-19 to 2022-23. Turnover Certificate with balance sheet obtained from Charted Accountant and achieved in at least two financial years Annual Financial Turnover in all classes of civil Engineering construction works only of Rs.14,95,649.29 usually not less than the estimated cost under this contract with UDIN. True Technical Bid In last five years That is 2018-19 to 2022-23 Satisfactorily completed as A prime contractor for at least one similar nature of work done work 50 Percent of the cost of the work that is not less than the amount Rs7.48 lakhs Certificate issued from the rank of Executive Engineer and above for the same should be furnished by the contractor. True Technical Bid Liquid assets and /or availability of credit facilities of not less than Rs.4.49 lakhs. That is 30 Percent of amount put to tender. Credit lines/ letter of credit/ certificates from Nationalized banks for meeting the fund requirement etc. for particularly this work only. Unconditional True Technical Bid The contractor should scan the GST Certificate. True Technical Bid The contractor should scan the PAN card. True Technical Bid Calculation sheet of Bidder Capacity AxNX2.5-B True Technical Bid Contractors Postal address and Mobile No True Technical Bid To qualify for award of this contract, each Tenderer in its name should have in the last five years Executed in any one year, the following minimum 80 Perc quantities of work in last five years. 1. RCC-PCC-52.144 Cum 2. Steel-2690 Kg 3. Rubble Masonry-30.048 Cum 4. BBM 33.83 Cum 5. Plastering-231.496 Sqm 6. Flooring- 29.52 Sqm True Technical Bid
tenderWorkLocationList
tenderAddress	None
tenderRecallDTO	None