createdTsNone
versionNone
createdDateNone
modifiedDateNone
noticeInvitingTenderDTO
createdTs1709554646635
version3
createdDateNone
modifiedDateNone
tenderTypeRFQ
evaluationTypeONE_COVER
evaluationTypeTextOne Cover
invitingStrategyOPEN
invitingStrategyTextOpen
taxTypeINCLUSIVE_TAX
tenderFee500.00
emd11020.00
bidValueTypeITEM_WISE
bidValueTypeTextItem wise
tenderReceiptClose15-03-2024 16:00:00
tenderQueryClose15-03-2024 11:00:00
technicalBidOpenNone
publishedDate05-03-2024 18:39:07
publishedByPostRDPR_EE_DIV_SRS
publishedByUserKPE13012 - SATISH HAYAGRIVACHARYA JAHAGIRDAR
bidValidityPeriod90
noOfCalls1
preBidMeetingDateNone
preBidMeetingYnFalse
preQualificationBidOpenNone
denominationTypeRUPEES
denominationTypeTextRupees
retenderedYnNone
percentageRateTypeTextNone
contactPersonEXECUTIVE ENGINEER
splitEmdRequiredYnFalse
emdBankGuaranteeNone
emdCashNone
bgValidityPeriodNone
hideWeightageNone
multipleCurrencySelectionAllowedYnFalse
isTechWeightageAllowedFalse
highestBidderSelectionFalse
isVariableEmdAllowedNone
qcbsTenderYnNone
itemwiseEmdRequiredYnNone
sampleSubmissionDateNone
officeNumber08384226381
mobileNumberNone
tenderSupplierListNone
tenderSchedule
createdTs1709554646677
version7
createdDateNone
modifiedDateNone
tenderNumberRDPR/2023-24/BD/WORK_INDENT4673
titleConstruction of Toilet at Balikoppa LPS of Pattana Panchayath in Siddapur Tq (OTHERS)
descriptionConstruction of Toilet at Balikoppa LPS of Pattana Panchayath in Siddapur Tq (OTHERS)
categoryWORKS
categoryTextWorks
ecv440627.81
deptNameRural Development and Panchayat Raj Department
statusPUBLISHED
statusTextPublished
remarksNone
csrValueNone
ecvtenderYnTrue
location976
locationNameRDPR Division Office Sirsi
provisionalAmount520000.0
groupOverheadTotalNone
fileNumberAEE/PRED/SDP/SCHOOL/2023-24/02
tenderSubEstimateList
createdTsversioncreatedDatemodifiedDateworkCategoryNamesubEstimateNameestimateTotalitemList
17095546470000NoneNoneBuildingsConstruction of Toilet at Balikoppa LPS of Pattana Panchayath in Siddapur Tq440627.81
idtenderSubEstimateIdcategoryNameitemCodedescriptionuomNamebaseRatefinalRatequantitymodifyQuantityYnminQuantitymaxQuantitybuyBackYnbuyBackValuehideYnnetAmounttaxCount
291239995570None2023-24-19.2.1Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge. ---- WORK COMPLETE WITHIN 2 MONTHSCum1862.561862.563.31FalseNoneNoneFalseNoneFalse6165.07360
291240095570None2023-24-1.4.1Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches ,foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m ---- WORK COMPLETE WITHIN 2 MONTHSCum271.04271.045.4FalseNoneNoneFalseNoneFalse1463.6160
291240195570None2023-24-2.1.2Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates ---- WORK COMPLETE WITHIN 2 MONTHSCable Km6343.686343.682.36FalseNoneNoneFalseNoneFalse14971.08480
291240295570None2023-24-5.5Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification I.S. 3620/1979 having compressive strength not less than 3.5 N/mm2 for saturated dry samples - For Foundation in CM 1:6. ---- WORK COMPLETE WITHIN 2 MONTHSCum7138.887138.883.2FalseNoneNoneFalseNoneFalse22844.4160
291240395570None2023-24-5.6Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification I.S. 3620/1979 having compressive strength not less than 3.5 N/mm2 for saturated dry samples - For Basement in CM 1:6. ---- WORK COMPLETE WITHIN 2 MONTHSCum7221.767221.764.29FalseNoneNoneFalseNoneFalse30981.35040
291240495570None2023-24-1.9Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- WORK COMPLETE WITHIN 2 MONTHSCum297.92297.926.4FalseNoneNoneFalseNoneFalse1906.6880
291240595570None2023-24-2.4.2Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- WORK COMPLETE WITHIN 2 MONTHSCum7435.857435.850.92FalseNoneNoneFalseNoneFalse6840.9820
291240695570None2023-24-2.1.4Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates ---- WORK COMPLETE WITHIN 2 MONTHSCum6963.046963.040.38FalseNoneNoneFalseNoneFalse2645.95520
291240795570None2023-24-5.7Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification I.S. 3620/1979 having compressive strength not less than 3.5 N/mm2 for saturated dry samples - For Super structure in CM 1:6. ---- WORK COMPLETE WITHIN 2 MONTHSCum7565.67565.68.17FalseNoneNoneFalseNoneFalse61810.9520
291240895570None2023-24-6.7Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction ofengineer incharge ofwork. ---- WORK COMPLETE WITHIN 2 MONTHSCum9196.329196.320.29FalseNoneNoneFalseNoneFalse2666.93280
291240995570None2023-24-2.5.1Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Lintel ---- WORK COMPLETE WITHIN 2 MONTHSCum9196.999196.990.69FalseNoneNoneFalseNoneFalse6345.92310
291241095570None2023-24-2.5.2Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Slab ---- WORK COMPLETE WITHIN 2 MONTHSCum11496.2411496.243.44FalseNoneNoneFalseNoneFalse39547.06560
291241195570None2023-24-2.11.aSupplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings ---- WORK COMPLETE WITHIN 2 MONTHSTonne100191.84100191.840.413FalseNoneNoneFalseNoneFalse41379.229920
291241295570None2023-24-11.34.bProviding and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. ---- WORK COMPLETE WITHIN 2 MONTHSKg204.96204.962.4FalseNoneNoneFalseNoneFalse491.9040
291241395570None2023-24-12.98.1Providing and fixing factory made pre fabricated non-monolithic Premium R.C.C. Door Frames factory manufactured in separate parts and assembled at bolts nuts system with mechanical table vibrating as per IS 6523-1983 with using M25 concrete as per IS 456 and reinforced with 1.70 kg of TMT steel reinforced with 3 No. of 6 mm dia Main TMT bars and 6 mm Dia TMT stirrups welded at 40 cm c/c in triangle shape per meter length of door frames, including cost of steel and fabrication charges having 4 No. of 304 Grade Stainless Steel hinges plate attachment made of 165 mm x 25 mm x 2.5 mm Stainless Steel Flat welded with required iron rods and flats with drilling for fixing flat CSK Head Machine screws made out of 304 grade stainless steel screws and MS square nuts of size 8 x 8 square and length 10 mm and making necessary provision in concrete for fixing aldrops, tower bolts and hold fasts etc., complete including two coats of oil based enamel primer providing without cill for shutter thickness upto 32 mm, 21 days tank immersed curing including cost of labour, materials, usage charge of machinery complete excluding the cost of door fixtures as per the direction of Engineer. Cross section of 60 mm x 100 mm ---- WORK COMPLETE WITHIN 2 MONTHSRmtr963.2963.221.4FalseNoneNoneFalseNoneFalse20612.480
291241495570None2023-24-12.53Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat moulded PVC C channel of 5mm thick sheet & 30 x 50mm wide to form stiles & 5mm thick & 75mm wide PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick 20mm wide PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet fitted in the M.S. Frame, Sealed to the stiles & rails with 5x30mm PVC sheet beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75 mm Aluminium hinges ---- WORK COMPLETE WITHIN 2 MONTHSSqm1778.561778.566.3FalseNoneNoneFalseNoneFalse11204.9280
291241595570None2023-24-8.3.2Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge ---- WORK COMPLETE WITHIN 2 MONTHSSqm372.96372.96104.88FalseNoneNoneFalseNoneFalse39116.04480
291241695570None2023-24-9.9Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete ---- WORK COMPLETE WITHIN 2 MONTHSSqm1205.121205.129.58FalseNoneNoneFalseNoneFalse11545.04960
291241795570None2023-24-9.38Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. ---- WORK COMPLETE WITHIN 2 MONTHSSqm1559.041559.0424.79FalseNoneNoneFalseNoneFalse38648.60160
291241895570None2023-24-8.25Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- WORK COMPLETE WITHIN 2 MONTHSSqm153.44153.44104.88FalseNoneNoneFalseNoneFalse16092.78720
291241995570None2023-24-14.1.1Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests ---- WORK COMPLETE WITHIN 2 MONTHSNos5470.085470.082.0FalseNoneNoneFalseNoneFalse10940.160
291242095570None2023-24-9.34Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing, polishing complete as per specifications. ---- WORK COMPLETE WITHIN 2 MONTHSSqm1730.41730.43.08FalseNoneNoneFalseNoneFalse5329.6320
291242195570None2023-24-14.23Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. ---- WORK COMPLETE WITHIN 2 MONTHSNos1292.481292.483.0FalseNoneNoneFalseNoneFalse3877.440
291242295570None2023-24-14.24Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. ---- WORK COMPLETE WITHIN 2 MONTHSNos3175.23175.23.0FalseNoneNoneFalseNoneFalse9525.60
291242395570None2023-24-14.7.3Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps ---- WORK COMPLETE WITHIN 2 MONTHSNos3209.923209.922.0FalseNoneNoneFalseNoneFalse6419.840
291242495570None2023-24-13.34Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. ---- WORK COMPLETE WITHIN 2 MONTHSLtr10.0810.08500.0FalseNoneNoneFalseNoneFalse5040.00
291242595570None2023-24-13.50.3Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 25mm dia. ---- WORK COMPLETE WITHIN 2 MONTHSRmtr250.88250.8822.5FalseNoneNoneFalseNoneFalse5644.80
291242695570None2023-24-13.50.5Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 100mm dia ---- WORK COMPLETE WITHIN 2 MONTHSRmtr1041.61041.615.0FalseNoneNoneFalseNoneFalse15624.00
291242795570None2023-24-13.17.2Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work ---- WORK COMPLETE WITHIN 2 MONTHSNos236.32236.324.0FalseNoneNoneFalseNoneFalse945.280
generalCriterionList
createdTsversioncreatedDatemodifiedDatecriterionTypedescriptiontenderEligibilityCriterionDocumentList
17095546480000NoneNoneELIGIBILITYTenders from Joint ventures are not acceptable.None
17095546480000NoneNoneELIGIBILITYBidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None
17095546480000NoneNoneELIGIBILITYBidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.None
17095546480000NoneNoneELIGIBILITYDepartment Registration DetailsNone
17095546480000NoneNoneELIGIBILITYTotal value of civl engineering works executed and payments received in the last five years (year-wise)None
17095546480000NoneNoneELIGIBILITYList of existing commitments and ongoing workNone
17095546480000NoneNoneELIGIBILITYList of works for which tenders already submittedNone
17095546480000NoneNoneELIGIBILITYBanker DetailsNone
17095546980000NoneNoneELIGIBILITYIt shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of KPPP on or before the last date and time of bid submission.None
17095547070000NoneNoneELIGIBILITYThe bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of KPPP portal due to internet connectivity issues and technical glitches at bidders end.None
17095547170000NoneNoneELIGIBILITYEMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.None
17095547250000NoneNoneELIGIBILITYBidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder.None
17095547350000NoneNoneELIGIBILITYBidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.None
17095547450000NoneNoneELIGIBILITYThe bid is to be submitted through GOK KPPP platform www.kppp.karnataka.gov.in only.None
17095547560000NoneNoneELIGIBILITYTenderers who have not registered in the GOK KPPP portal should be registered through web site www.kppp.karnataka.gov.inNone
17095547660000NoneNoneELIGIBILITYThe Tenderer should obtain tender documents through KPPP web site www.kppp.karnataka.gov.in . in at free of cost. Additional conditions and informations also can be obtained through the above mentioned website.None
17095547770000NoneNoneELIGIBILITYBidders / Contractors submit the bid on the website itself (for help on KPPP / e-payment, please contact helpdesk No. 08025501216 and 080 25501227 from Monday to Saturday during 9.00 AM to 9.00 PM.)None
17095547860000NoneNoneELIGIBILITYAny damage during the progress of work, the damage cost should be beard by the contractor.None
17095547940000NoneNoneELIGIBILITYTender application cost will not be refundable or exchangeable in case of cancellation of tender.None
17095548060000NoneNoneELIGIBILITYAll materials should be in good quality as per specification, quality certificate for the same should be obtained from the concerned authority at their own cost.None
17095548150000NoneNoneELIGIBILITYThe work should be carried out in accordance with the standard specifications specified by the department. Maintenance period from the contractor for the above works is 1 year from the date of completion of work.None
17095548240000NoneNoneELIGIBILITYCorrigendums / modifications / correction, if any, will be published in the website only.None
17095548340000NoneNoneELIGIBILITYMore details should be collected from the office at working hoursNone
17095548480000NoneNoneELIGIBILITYThe Executive Engineer rights accept and reject the tender without intimation or informationNone
17095548580000NoneNoneELIGIBILITYThe Executive Engineer PRE SIRSI Division SIRSI invites tenders from eligible tenderers who have been registered in KPWD with kppp portal for the construction of worksNone
17095548710000NoneNoneELIGIBILITYContractor should made an agreement within 20 days of tender acceptance date and work should be carried out immediately after Signing agreement. If not tender will be cancelled at the contractors own risk and costNone
17095548810000NoneNoneELIGIBILITYGST Shall be paid to the tendered amount separatelyNone
17095548930000NoneNoneELIGIBILITYThe Contractor should scan the KPWD Registration Copy.None
17095549220000NoneNoneELIGIBILITYThe Contractor should scan the PAN Card and GST No.None
17095549340000NoneNoneELIGIBILITYContractors Postal Address and Mobile No.None
17095549480000NoneNoneELIGIBILITYBidder can access tender documents on the website, fill them and submit the completed tender document into electronic tender on the website https://www.kppp.karnataka.gov.in/None
17095549640000NoneNoneELIGIBILITYEMD shall be paid in the form of e-payment through KPPP portal on or before as per the last date and time mentioned in the KPPP portal.None
17095549760000NoneNoneELIGIBILITYBidder can access tender documents on the website, fill them and submit the completed tender document into electronic tender on the website https://www.kppp.karnataka.gov.in/ after submitting the EMD and tender processing fee in the form of e-payment. EMD will be refunded only after acceptance of successful bidder.None
17095549900000NoneNoneELIGIBILITYIf the rates quoted by the Contractor is lesser than the amount put to tender the difference cost (Additional Security Deposit) should be paid by the contractor through FDR in the favor of Executive Engineer at the time of AgreementNone
17095550010000NoneNoneELIGIBILITYContractor should obey with the above conditions in addition to the KW-1None
17095550110000NoneNoneELIGIBILITYTurn over Certificate should be enclosed for the last previous 5 years from charted accountant in singal page and achieved in at least two financial year a minimum financial turnover is equal or above of Rs: 4.41 lakhsNone
17095550200000NoneNoneELIGIBILITYTenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity should be not less than Rs: 4.41 lakhsNone
preQualCriterionListNone
technicalCriterionListNone
tenderCriterionDocumentList
documentNameoptionaldocumentTypeText
The Executive Engineer, P.R.E. SIRSI Division, SIRSI invites tenders from eligible tenderers, who have been registered in KPWD and with kppp portal for the construction of worksTrueTechnical Bid
Financial Turnover Certificate Should be Enclosed For the last previous 5 years From Charted Accountant in a single pageTrueTechnical Bid
VAT/ GST CertificateTrueTechnical Bid
KW 1 format 1.3 A and 1.3 B compulsary Submitted with detailsTrueTechnical Bid
The Contractor should scan the KPWD Registration CopyTrueTechnical Bid
The Contractor should scan the PAN CardTrueTechnical Bid
Contractors Postal Address and Mobile No.TrueTechnical Bid
EMD shall be paid in the form of e-payment through kppp portal on or before as per the last date and time mentioned in the kppp portal.TrueTechnical Bid
Turn over Certificate should be enclosed for the last previous 5 years from charted accountent in singal page and achieved in at least two financial year a minimum financial turnover is equal or above of Rs. 4.41 lakhsTrueTechnical Bid
Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity should be not less than Rs. 4.41 lakhsTrueTechnical Bid
tenderWorkLocationList
tenderSubEstimateNamedistrictNametaluqNameloksabhaContNameassemblyContNamelocationDescriptionlatitudeDegreeslatitudeMinuteslatitudeSecondslongitudeDegreeslongitudeMinuteslongitudeSeconds
BuildingsUttara KannadaSiddapuraKanaraSIRSI (SC)LPS BALIKOPPANoneNoneNoneNoneNoneNone
tenderAddressNone
tenderRecallDTONone