createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1709620942348 version 6 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 2640.00 emd 200000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 19-03-2024 16:00:00 tenderQueryClose 11-03-2024 11:00:01 technicalBidOpen 20-03-2024 16:00:01 publishedDate 05-03-2024 16:23:31 publishedByPost EWHFWD_CE_CEOFF_BNG publishedByUser KPE16838 - BALEKATTE KUMARASWAMY PAVITHRA bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate 12-03-2024 11:30:01 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Technical Assistant splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08029557023 mobileNumber 9449843023 tenderSupplierList None
tenderSchedule	createdTs 1709620942377 version 9 createdDate None modifiedDate None tenderNumber EWHFWD/2023-24/BD/WORK_INDENT303 title CONSTRUCTION OF DISTRICT INTEGRATED PUBLIC HEALTH LABORATORY IN THE PREMISES OF DISTRICT HOSPITAL AT MYSURU. description CONSTRUCTION OF DISTRICT INTEGRATED PUBLIC HEALTH LABORATORY IN THE PREMISES OF DISTRICT HOSPITAL AT MYSURU. category WORKS categoryText Works ecv 10520362.80 deptName Engineering Wing of Health and Family Welfare Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn False location 3521 locationName EWHFWD Chief Engineer Office Bengaluru provisionalAmount 11100000.0 groupOverheadTotal 0.0 fileNumber HFW/AEE/MYS/IPHLDHMYS
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1709620942000 0 None None Buildings CONSTRUCTION OF DISTRICT INTEGRATED PUBLIC HEALTH LABORATORY IN THE PREMISES OF DISTRICT HOSPITAL AT MYSURU. (Civil Works) 9099866.7 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2917255 95987 None I-2.5A P-7 V-3 Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness.By Mechanical Means using Dozer.A In area of light jungle ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. 100 Sqm 486.93 486.93 3.85 False None None False None False 1874.6805 0 2917256 95987 None I-1.12 P-8 V-1 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Cum 117.71 117.71 115.5 False None None False None False 13595.505 0 2917257 95987 None I-1.14.1 P-8 V-1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Cum 126.38 126.38 122.85 False None None False None False 15525.783 0 2917258 95987 None I-1.15.1 P-8 V-1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting upto 1.5 m depth ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Cum 449.76 449.76 13.16 False None None False None False 5918.8416 0 2917259 95987 None I-1.1A P-3 V-3 Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/Kankar/Moorum. (Tipper 5.5 m3) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Cum 167.27 167.27 63.16 False None None False None False 10564.7732 0 2917260 95987 None I-4.1 P-5 V-2 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Sqm 146.2 146.2 305.5 False None None False None False 44664.1 0 2917261 95987 None I-1.9 P-7 V-1 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Cum 329.57 329.57 123.34 False None None False None False 40649.1638 0 2917262 95987 None I-1.8 P-7 V-1 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Cum 587.29 587.29 374.11 False None None False None False 219711.0619 0 2917263 95987 None I-2.1.3 P-15 V-1 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Cum 7420.37 7420.37 47.18 False None None False None False 350093.0566 0 2917264 95987 None I-2.2.1 P-15 V-1 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FOOTINGS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Cum 8412.76 8412.76 26.51 False None None False None False 223022.2676 0 2917265 95987 None I-2.2.1 P-15 V-1 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PEDESTALS ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Cum 8568.55 8568.55 3.38 False None None False None False 28961.699 0 2917266 95987 None I-2.5.2 P-17 V-1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates COLUMNS GF ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Cum 14413.41 14413.41 16.5 False None None False None False 237821.265 0 2917267 95987 None I-2.5.2 P-17 V-1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PLINTH BEAM, RCC SLAB GF ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Cum 12717.72 12717.72 74.4 False None None False None False 946198.368 0 2917268 95987 None I-2.5.2 P-17 V-1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates RCC BEAMS, LINTELS GF ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Cum 13565.56 13565.56 20.07 False None None False None False 272260.7892 0 2917269 95987 None I-2.1.4 P-15 V-1 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates GF ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Cum 8473.15 8473.15 5.04 False None None False None False 42704.676 0 2917270 95987 None I-15.4 P-117 V-3 Providing and inserting nipples with approved fixing compound after drilling holes for grouting as per Technical Specifications including subsequent cutting/removal and sealing of the hole as necessary of nipples after completion of grouting with Cement/Epoxy GF ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Nos 252.76 252.76 20.0 False None None False None False 5055.2 0 2917271 95987 None I-8.16A P-55 V-2 Providing Lath plaster with cement mortar 1:3 5cm thick with 6mm dia mild steel bars at 20cms. C to c both horizontally and vertically fixing chicken mesh for drop chejjas, facia, backing to cup board including cost of all materials, labour, providing and removing form work HOM of machineries, curing, complete as per specification. GF ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Sqm 1533.88 1533.88 4.73 False None None False None False 7255.2524 0 2917272 95987 None I-2.11a P-84 V-1 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening,cutting, b ending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification GF ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Tonne 110837.22 110837.22 16.39 False None None False None False 1816622.0358 0 2917273 95987 None I-5.4 P-9 V-2 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Cum 7915.97 7915.97 5.87 False None None False None False 46466.7439 0 2917274 95987 None I-6.32 P-17 V-2 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. GF ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Sqm 1623.09 1623.09 492.27 False None None False None False 798998.5143 0 2917275 95987 None I-6.34 P-17 V-2 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. GF ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Sqm 1367.86 1367.86 56.4 False None None False None False 77147.304 0 2917276 95987 None I-12.13.1 P-100 V-2 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. GF ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Cum 122431.79 122431.79 1.58 False None None False None False 193442.2282 0 2917277 95987 None I-12.51 P-105 V-2 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. GF ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Nos 1258.82 1258.82 16.0 False None None False None False 20141.12 0 2917278 95987 None I-10.6.3 P-69 V-2 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm GF ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Nos 74.34 74.34 96.0 False None None False None False 7136.64 0 2917279 95987 None I-12.57.6 P-106 V-2 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 35 mm thick both side commercial GF ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Sqm 4115.96 4115.96 48.0 False None None False None False 197566.08 0 2917280 95987 None I-12.90 P-112 V-2 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) GF ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Sqm 8343.43 8343.43 33.75 False None None False None False 281590.7625 0 2917281 95987 None I-12.85 P-110 V-2 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) GF ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Sqm 7085.84 7085.84 3.78 False None None False None False 26784.4752 0 2917282 95987 None I-11.34A P-110 V-2 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding GF ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Kg 208.15 208.15 788.13 False None None False None False 164049.2595 0 2917283 95987 None I-12.93.1 P-112 V-2 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately). Size 62 x 100mm. GF ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. m 869.78 869.78 20.4 False None None False None False 17743.512 0 2917284 95987 None I-12.94.2 P-112 V-2 Providing and fixing factory made Green certified, Anti Termite, UV resistant,high water absorbant si ngle extruded WPC (Wood PolymerComposite) solidplain flush door shutter of required size comprising of virgin polymer ofK value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximumtoxicity index of 12 for 100 g) having minimum density of 650 kg/m3 andscrew withdrawal strength of 1800 N (Face) & 900 N (Edge), minimumcompressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 andresistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixingwith stainless steel butt hinges of required size with necessary full bodythreaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to bepaid separately) GF ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Sqm 5006.8 5006.8 7.56 False None None False None False 37851.408 0 2917285 95987 None I-12.59 P-107 V-2 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. GF ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Nos 1380.25 1380.25 16.0 False None None False None False 22084.0 0 2917286 95987 None I-11.25.2 P-109 V-2 Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. GF ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Kgs 168.5 168.5 241.92 False None None False None False 40763.52 0 2917287 95987 None I-8.4.2 P-41 V-2 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge... ( Inside) GF ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Sqm 386.57 386.57 768.67 False None None False None False 297144.7619 0 2917288 95987 None I-8.10 P-42 V-2 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. GF ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Sqm 261.43 261.43 529.04 False None None False None False 138306.9272 0 2917289 95987 None I-8.51 P-50 V-2 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Gf ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Sqm 123.9 123.9 1297.71 False None None False None False 160786.269 0 2917290 95987 None I-8.5.2 P-42 V-2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. ( Outside) GF ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Sqm 432.41 432.41 322.67 False None None False None False 139525.7347 0 2917291 95987 None I-8.16.2 P-43 V-2 Providing and fixing suitable plaster mesh 150 mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment. Plaster mesh 150mm wide GF ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Rmtr 44.84 44.84 972.0 False None None False None False 43584.48 0 2917292 95987 None I-8.79 P-54 V-2 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. GF ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Rmtr 64.43 64.43 292.0 False None None False None False 18813.56 0 2917293 95987 None I-9.17.2 P-61 V-2 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete..).Size of Tile 600x600 mm GF ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Sqm 1455.83 1455.83 265.08 False None None False None False 385911.4164 0 2917294 95987 None I-8.2.1 P-41 V-2 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. GF ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Sqm 365.51 365.51 133.88 False None None False None False 48934.4788 0 2917295 95987 None I-9.24 P-63 V-2 Providing and laying Polished Granite flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.** Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. GF ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Sqm 3533.63 3533.63 37.28 False None None False None False 131733.7264 0 2917296 95987 None I-9.29 P-64 V-2 Providing and laying flooring and steps fine dressed granite stone slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. GF ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Sqm 5335.13 5335.13 31.44 False None None False None False 167736.4872 0 2917297 95987 None I-15.7 P-134 V-2 Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re-inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis) GF ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Sqm 761.99 761.99 25.62 False None None False None False 19522.1838 0 2917298 95987 None I-9.11 P-60 V-2 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete. GF ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Sqm 1101.47 1101.47 25.62 False None None False None False 28219.6614 0 2917299 95987 None I-9.39 P-65 V-2 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. GF ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Sqm 1795.31 1795.31 96.6 False None None False None False 173426.946 0 2917300 95987 None I-8.39 P-48 V-2 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. GF ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Sqm 157.35 157.35 529.04 False None None False None False 83244.444 0 2917301 95987 None I-8.32 P-45 V-2 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. GF ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Sqm 193.28 193.28 322.67 False None None False None False 62365.6576 0 2917302 95987 None I-8.34.3 P-47 V-2 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. GF ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Sqm 61.95 61.95 37.53 False None None False None False 2324.9835 0 2917303 95987 None I-8.40 P-48 V-2 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. GF ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Sqm 142.49 142.49 37.53 False None None False None False 5347.6497 0 2917304 95987 None I-8.34.1 P-47 V-2 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. GF ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Sqm 65.67 65.67 115.2 False None None False None False 7565.184 0 2917305 95987 None I-8.47 P-49 V-2 Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. GF ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Sqm 167.27 167.27 115.2 False None None False None False 19269.504 0 2917306 95987 None I-12.92 P-112 V-2 Providing& fixing of Openable door made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the openable frame. The frame having overall size of 60mm x 55mm with GI reinforcement of 1mm thickness and openable sash with overall size of 60mm x 102mm and GI reinforcement of 2mm thickness. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 34 mm. Windows shall be provided with 6mm plain float glass, Standard hardware with 2D/3D hinge & Multi point locking system with Handle. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 900mm x 2400mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) GF ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Sqm 7737.56 7737.56 8.4 False None None False None False 64995.504 0 2917307 95987 None I-12.91 P-112 V-2 Providing& fixing of Openable window made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the openable frame. The frame having overall size of 60mm x 55mm with GI reinforcement of 1mm thickness and openable sash with overall size of 60mm x 75mm and GI reinforcement of 1.5mm thickness. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 34 mm. Windows shall be provided with 5mm plain float glass, Standard hardware with friction hinge & Multi point locking system with Handle. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 900mm x 1819mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) GF ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Sqm 7510.82 7510.82 29.79 False None None False None False 223747.3278 0 2917308 95987 None I-10.2 S.R 2018-19 KSRB 10-3 :Providing and laying integral cement based waterproofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc , consisting of following application. (a) Applying and grouting a slurry coat of neat cement using 2.75 kglsqm of cement admixed with proprietary water proofing compound conforming to 18:2645 over the RCC slab after cleaning the surface before treatment. (b) Laying cement concrete using broken brick bats 25mm to 1OOmm size with 50% of cement mortar 1:5 admixed with proprietary water proofing compound conforming 18:2645 over 20mm thick layer of cement mortar 1:5 admixed with proprietary water proofing compound to required slope and treating similarly the adjoining walls upto 300mm height including rounding off junctions of walls and slabs. (c) After two days of proper curing, applying a second coat of cement lurry admixed with proprietary water proofing compound (d) Finishing the surface with 20mm thick joint less cement mortar of mix 1:4 admixed with proprietary water proofing compound and finally finishing the surface with trowel and neat cement slurry and making of 300x300mm square. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test including cost of materials, labour complete as per specifications. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Sqm 1226.34 1226.34 328.86 False None None False None False 403294.1724 0 2917309 95987 None I-10.1.7 P-134 V-5 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 110mm dia., 6 kg/sqcm & class 3 ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Rmtr 514.32 514.32 24.0 False None None False None False 12343.68 0 2917310 95987 None I-10.1.2 P-62 V-2 Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut forkitchen platforms, vanity counters, window sills, facias and similar locationsof required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treatedwith white cement, mixed with matching pigment, epoxy touch up,including rubbing, curing, moulding and polishing to edges to give highgloss finish etc. complete at all levels. GF ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Sqm 4877.94 4877.94 50.73 False None None False None False 247457.8962 0 1709620942000 0 None None Buildings CONSTRUCTION OF DISTRICT INTEGRATED PUBLIC HEALTH LABORATORY IN THE PREMISES OF DISTRICT HOSPITAL AT MYSURU. (Water and Sanitary Works) 316773.87 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2917311 95988 None I-16.7.4 P-187 V-5 Providing and fixing normal gauge polythene pipes of approved quality with special flange compression type fittings of approved make including trench excavation and refilling etc. for EXTERNAL WORKS with: 50mm nominal bore pipes ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. m 172.22 172.22 15.0 False None None False None False 2583.3 0 2917312 95988 None I-10.1.5 P-34 V-5 Providing PVC ringtite pipes conforming to IS 4985:2000 with latestamendments and conveying to worksite, rolling and lowering intotrenches, laying true to line and level and perfect linking at joints, testingand commissioning, including loading unloading at both destinationsand cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approvedtype, with all labour with all lead & lift including encasing the pipealround to a depth of not less than 15 cms. with soft gravel or selectedearth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will makehis own arrangements for procuring water for testing) etc. complete ForPVC pipes 75mm dia., 6 kg/sqcm & class 3 ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. m 272.58 272.58 40.0 False None None False None False 10903.2 0 2917313 95988 None I-10.1.7 P-34 V-5 Providing PVC ringtite pipes conforming to IS 4985:2000 with latestamendments and conveying to worksite, rolling and lowering intotrenches, laying true to line and level and perfect linking at joints, testingand commissioning, including loading unloading at both destinationsand cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approvedtype, with all labour with all lead & lift including encasing the pipealround to a depth of not less than 15 cms. with soft gravel or selectedearth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will makehis own arrangements for procuring water for testing) etc. complete ForPVC pipes 110mm dia., 6 kg/sqcm & class 3 ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. m 509.23 509.23 30.0 False None None False None False 15276.9 0 2917314 95988 None I-13.47 V-2 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expansion,(i)the single socketed pipes 75mm diameter ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. m 244.08 244.08 30.0 False None None False None False 7322.4 0 2917315 95988 None I-13.48 V-2 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expansion,(i)the single socketed pipes 100mm diameter ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. m 360.55 360.55 20.0 False None None False None False 7211.0 0 2917316 95988 None I-14.31 P-128 V-2 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Nos 1511.58 1511.58 4.0 False None None False None False 6046.32 0 2917317 95988 None I-13.16 P-117 V-2 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 768.18 768.18 10.0 False None None False None False 7681.8 0 2917318 95988 None I-14.3.2 P-123 V-2 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 7192.4 7192.4 4.0 False None None False None False 28769.6 0 2917319 95988 None I-14.28.2.2 P-128 V-2 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Nos 113.99 113.99 10.0 False None None False None False 1139.9 0 2917320 95988 None I-13.15 P-117 V-2 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Nos 898.28 898.28 10.0 False None None False None False 8982.8 0 2917321 95988 None I-14.11.2 P-126 V-2 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Nos 6296.6 6296.6 4.0 False None None False None False 25186.4 0 2917322 95988 None I-14.7.1 P-124 V-2 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 3818.6 3818.6 2.0 False None None False None False 7637.2 0 2917323 95988 None I-14.22A P-127 V-2 Providing and fixing CP Brass 32mm size Bottle Trap of approved quality& make and as per the direction of Engineer-in-charge. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 1003.59 1003.59 6.0 False None None False None False 6021.54 0 2917324 95988 None I-14.37.1 P-129 V-2 Providing and fixing Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 379.13 379.13 6.0 False None None False None False 2274.78 0 2917325 95988 None 13.28.1 Providing and fixing P.T.M.T. extension nipple 15mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 79.3 79.3 20.0 False None None False None False 1586.0 0 2917326 95988 None I-13.2.1 P-115 V-2 Providing and fixing brass bib cock of approved quality 15 mm nominal bore ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Nos 354.35 354.35 10.0 False None None False None False 3543.5 0 2917327 95988 None I-13.32.1 P-120 V-2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. m 382.85 382.85 20.0 False None None False None False 7657.0 0 2917328 95988 None I-13.32.2 P-120 V-2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. m 469.58 469.58 30.0 False None None False None False 14087.4 0 2917329 95988 None I-13.33.2 P-120 V-2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) External & Shafts & Terrace 20 mm nominal dia Pipes ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. m 268.86 268.86 30.0 False None None False None False 8065.8 0 2917330 95988 None I-13.33.3 P-120 V-2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) External & Shafts & Terrace 25 mm nominal dia Pipes ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. m 366.74 366.74 20.0 False None None False None False 7334.8 0 2917331 95988 None I-13.4.1 P-115 V-2 Providing and fixing Brass full way valve with C.I. wheel (screwed end) 25 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 680.21 680.21 8.0 False None None False None False 5441.68 0 2917332 95988 None I-16.9 P-187 V-5 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Nos 6757.51 6757.51 5.0 False None None False None False 33787.55 0 2917333 95988 None I-13.34 P-120 V-2 Providing and placing on terrace (at all floor levels) polyethylene water storage tank,IS:12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. l 11.15 11.15 2000.0 False None None False None False 22300.0 0 2917334 95988 None Approved rate Providing, fixing, testing and commissioning of deep seal PVC multi inlet floor trap of self cleansing design moulded or fabricated with CP grating, rubber ring / solvent cement followed by application of leak proof adhesive like FRP paste including making good the floors etc., complete as directed by the Engineer in charge & approved quality confirming to ISI or BIS Standards 10Cms X 7.5Cms ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Nos 371.7 371.7 10.0 False None None False None False 3717.0 0 2917335 95988 None Approved rate Air Vent Cowel 75mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Nos 413.0 413.0 10.0 False None None False None False 4130.0 0 2917336 95988 None Approved rate Air Vent Cowel 110mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Nos 590.0 590.0 5.0 False None None False None False 2950.0 0 2917337 95988 None Approved rate Providing and fixing testing and commissioning of CP health faucet Hand operated spray unit (instant type) CP Crutch etc., complete as directed by the Engineer in charge. ALD-577 ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Nos 1180.0 1180.0 4.0 False None None False None False 4720.0 0 2917338 95988 None Approved rate Providing and fixing, testing and commissioning approved make submersible pump made of C.I Construction suitable for building application. Thequoted rate shall also include for auto lvl.controller. providing necessary safety devices viz. dry run protection, over load relays etc., complete working on 230V, 50Hz, 1Ph, with starter,Duty of Pump : 6.0cum/hr @ 35.0m Head (1 No. Working + 1 No. Stand By) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Nos 23600.0 23600.0 2.0 False None None False None False 47200.0 0 2917339 95988 None Approved rate Providing stoneware gully trap of approved quality and make fixing in M-15 and plastering with CM 1:3 wherever necessary.( Rate includes cost of all materials, fixtures and lead).15cms x 10cms ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Nos 3304.0 3304.0 4.0 False None None False None False 13216.0 0 1709620942000 0 None None Buildings CONSTRUCTION OF DISTRICT INTEGRATED PUBLIC HEALTH LABORATORY IN THE PREMISES OF DISTRICT HOSPITAL at MYSURU. (Electrical Works) 1025422.23 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2917340 95989 None 2.1.1 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point up to 3Mtr from tapping point to out let via switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Point 353.12 353.12 25.0 False None None False None False 8828.0 0 2917341 95989 None 2.1.2 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Point 488.17 488.17 34.0 False None None False None False 16597.78 0 2917342 95989 None 2.1.3 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6Mtr up to 10Mtr from tapping point to out let via switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Point 706.23 706.23 60.0 False None None False None False 42373.8 0 2917343 95989 None 3.4.1 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1-2Way ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 170.98 170.98 20.0 False None None False None False 3419.6 0 2917344 95989 None 3.4.2 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4-5Way ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 219.3 219.3 8.0 False None None False None False 1754.4 0 2917345 95989 None 3.4.3 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6Way ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 272.58 272.58 4.0 False None None False None False 1090.32 0 2917346 95989 None 3.4.4 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8 Way ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 323.38 323.38 10.0 False None None False None False 3233.8 0 2917347 95989 None 3.4.5 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12Way ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 395.24 395.24 35.0 False None None False None False 13833.4 0 2917348 95989 None 3.5.1 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1-2module ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 169.74 169.74 20.0 False None None False None False 3394.8 0 2917349 95989 None 3.5.3 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 4-5 Module ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 216.83 216.83 8.0 False None None False None False 1734.64 0 2917350 95989 None 3.5.4 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 6 Module ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 289.93 289.93 4.0 False None None False None False 1159.72 0 2917351 95989 None 3.5.5 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 351.88 351.88 10.0 False None None False None False 3518.8 0 2917352 95989 None 3.5.6 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 10-12 Module ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 426.22 426.22 35.0 False None None False None False 14917.7 0 2917353 95989 None 3.6.1 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 126.38 126.38 45.0 False None None False None False 5687.1 0 2917354 95989 None 3.6.2 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Two way Switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 205.67 205.67 184.0 False None None False None False 37843.28 0 2917355 95989 None 3.6.3 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 211.87 211.87 79.0 False None None False None False 16737.73 0 2917356 95989 None 3.6.9 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Bell push ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 219.3 219.3 5.0 False None None False None False 1096.5 0 2917357 95989 None 3.6.4 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 442.32 442.32 24.0 False None None False None False 10615.68 0 2917358 95989 None 3.6.7 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16A One Way Switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 223.02 223.02 15.0 False None None False None False 3345.3 0 2917359 95989 None 3.6.10 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 403.91 403.91 21.0 False None None False None False 8482.11 0 2917360 95989 None 3.6.11 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 292.4 292.4 18.0 False None None False None False 5263.2 0 2917361 95989 None 3.6.12 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV/Telephone socket ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 193.28 193.28 2.0 False None None False None False 386.56 0 2917362 95989 None 1.9.2 Supplying PVC flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using NF screws and on either end of the pipe terminated completely 25 mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. m 27.26 27.26 50.0 False None None False None False 1363.0 0 2917363 95989 None 1.2.1 Concealed Conduit System Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2) 19/20mm dia 2mm thick ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. m 81.77 81.77 800.0 False None None False None False 65416.0 0 2917364 95989 None 1.2.2 Concealed Conduit System Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2) 25mm dia 2mm thick ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. m 96.64 96.64 500.0 False None None False None False 48320.0 0 2917365 95989 None 1.3.1 Groove Cutting in Wall Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 19/20mm dia 2mm thick ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. m 84.25 84.25 400.0 False None None False None False 33700.0 0 2917366 95989 None 1.3.2 Groove Cutting in Wall Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 25mm dia 2mm thick ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. m 97.88 97.88 250.0 False None None False None False 24470.0 0 2917367 95989 None 2.3.2 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 1.5 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. m 32.21 32.21 400.0 False None None False None False 12884.0 0 2917368 95989 None 2.3.3 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 2.5 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. m 52.04 52.04 800.0 False None None False None False 41632.0 0 2917369 95989 None 2.3.4 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 4 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. m 78.06 78.06 500.0 False None None False None False 39030.0 0 2917370 95989 None 2.3.5 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 6 Sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. m 113.99 113.99 300.0 False None None False None False 34197.0 0 2917371 95989 None 5.19.9 Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure II- Double Door 12 Way SP & N ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 2885.63 2885.63 2.0 False None None False None False 5771.26 0 2917372 95989 None 5.18.4 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32 A DP ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 915.62 915.62 40.0 False None None False None False 36624.8 0 2917373 95989 None 5.20.1 Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 16A-25A 2 pole ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 5299.2 5299.2 2.0 False None None False None False 10598.4 0 2917374 95989 None I-32.03 Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975 4 core 10 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Km 146206.96 146206.96 0.1 False None None False None False 14620.696 0 2917375 95989 None I-21.05 Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required. 6 sqmm to 16 sqmm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Km 25877.75 25877.75 0.1 False None None False None False 2587.775 0 2917376 95989 None 1.6.1 Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, includingsetting out, shoring, strutting, barricading, caution lights, removal ofstumps and other deleterious matter, including dressing of excavatedsurfaces, disposing off or leveling the excavated earth or sorting& stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides offoundations etc. in layers not exceeding 20cm in depth, consolidatingeach deposited layer by ramming and watering and lift upto 1.5 mincluding cost of labour, tools, usage& other appurtenances requiredto complete the work. In all kinds of soils. Depth upto 1.50m ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Cum 675.26 675.26 50.0 False None None False None False 33763.0 0 2917377 95989 None 13.2.3 Supplying and Fixing........mm dia clampsss A GI pipe bracket upto 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL street light fitting of all capacities on rail/RCC/wall/tubular pole, using suitable clamps, bolts, nuts and wiring using suitable capacity wires. Using 40mm dia G.I.Pipe ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. m 1831.24 1831.24 5.0 False None None False None False 9156.2 0 2917378 95989 None I-12.56 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. No 4348.89 4348.89 2.0 False None None False None False 8697.78 0 2917379 95989 None 12.58.2 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. m 101.6 101.6 30.0 False None None False None False 3048.0 0 2917380 95989 None 12.58.5 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 50 x 6 mm GI strip ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. m 270.1 270.1 15.0 False None None False None False 4051.5 0 2917381 95989 None 11.3.2 Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V @ 50/60Hz & Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fighting 1 x4'- 20/22 w ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 854.91 854.91 53.0 False None None False None False 45310.23 0 2917382 95989 None 11.5.2 Supply of round/square recess/surface mounted rolling type LED Down light with .......W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V @ 50/60Hz & Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 10-12W ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 1096.52 1096.52 10.0 False None None False None False 10965.2 0 2917383 95989 None 11.11.3 Supplying & fixing of retrofit type - LED bulb.......W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI greater than 70%. efficacy greater than 80 lumen per watt, life greater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF greater than 0.95, power loss should less than 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 7W, 6500K ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 184.61 184.61 6.0 False None None False None False 1107.66 0 2917384 95989 None 11.11.5 Supplying & fixing of retrofit type - LED bulb.......W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI greater than 70%. efficacy greater than 80 lumen per watt, life greater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF greater than 0.95, power loss should less than 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 12W, 6500K ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 333.29 333.29 10.0 False None None False None False 3332.9 0 2917385 95989 None 11.8.2 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT greater than 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire greater than IK08. Power Factor greater than 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency greater than130lm/w, nominal CRI greater than 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. LED Streetlight 40watts ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. No 4985.74 4985.74 2.0 False None None False None False 9971.48 0 2917386 95989 None 6.2.1 Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.-12" Sweep (300 mm) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 3678.59 3678.59 10.0 False None None False None False 36785.9 0 2917387 95989 None 6.3.1 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. 48" Sweep (1200mm) Regular model ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 3697.18 3697.18 24.0 False None None False None False 88732.32 0 2917388 95989 None 6.5.2 Supplying wall mounting fan suitable to operate at single phase 230v AC. Supply 400 mm Sweep ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 3979.67 3979.67 4.0 False None None False None False 15918.68 0 2917389 95989 None I-12.46 Supplying & Fixing of 70-150 Watts lamp holder 2 Pin ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 78.06 78.06 16.0 False None None False None False 1248.96 0 2917390 95989 None 13.7.1 Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall / ceiling / Rafter / Girders ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 151.16 151.16 53.0 False None None False None False 8011.48 0 2917391 95989 None I-13.11 Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary length of 23 / 0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 390.29 390.29 28.0 False None None False None False 10928.12 0 2917392 95989 None I-13.13 Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 875.97 875.97 10.0 False None None False None False 8759.7 0 2917393 95989 None I-13.5 Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 200.72 200.72 2.0 False None None False None False 401.44 0 2917394 95989 None 7.2.1 Supplying ...litres capacity vertical/horizontal type wall mounting Electrical water heater with 22 SWG copper/SS sheet metal inner Container tinned inside and anticorrosive paint outside and 20 SWG M.S. sheet metal outer cover filled with glass wool between inner and outer container for thermal insulation complete. The inlet and outlet pipes so arranged that water flow inside results in water to flow out from the inner container without turbulence. The Inner container shall have direct immersion type copper tube nickel plate .2KW capacity element with a neon indicator fitted with 20A capacity 25 to 85 degree Centigrade range thermostat. The water heater shall completely be wired with 40/0.0076 inch 3 core copper flexible wire of 1.5 meters length and the outer container provided with heavy gauge brackets for wall mounting.5 Star With Fibre body 25Litres ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 14780.03 14780.03 1.0 False None None False None False 14780.03 0 2917395 95989 None 13.15.1 Erection charges for fixing a ... litres capacity wall mounting electric geysers using bolts, flat at one end nut and washers at the other end for through bolts and nuts and washers with 150x450x600mm back plate and wiring complete with 15A 3 pin top upto 30 Litres ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 822.7 822.7 1.0 False None None False None False 822.7 0 2917396 95989 None 5.42.1 Fabricating supplying and mounting MS box made out ...SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete 14SWG ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Sq CM 0.62 0.62 15000.0 False None None False None False 9300.0 0 2917397 95989 None 5.40.1 Supplying .........amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 100Amps 4x30x6mm Aluminum Strips ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. m 3054.14 3054.14 2.0 False None None False None False 6108.28 0 2917398 95989 None 5.40.3 Supplying .........amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 400 A 4 x 50 x 10 mm Aluminium Strips ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. m 5507.36 5507.36 3.0 False None None False None False 16522.08 0 2917399 95989 None 5.41.1 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 40x40x6mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. m 377.9 377.9 4.0 False None None False None False 1511.6 0 2917400 95989 None 5.41.4 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 50x100x50x6mm C channel ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. m 936.68 936.68 5.0 False None None False None False 4683.4 0 2917401 95989 None 5.44.3 Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water proof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase / Three Phase Energy Meter in suitable base plate and having a provision for Fuse / MCB cut-out with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility. 300 mm x 600 mm x 170 mm ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Nos 8508.21 8508.21 1.0 False None None False None False 8508.21 0 2917402 95989 None 5.15.1 Supplying and fixing Moulded Case Circuit Breaker (MCCB) .over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of Overload and Short circuit with thermal Magnetic/Micro processor release and Earth Fault as per IS-13947. (lcu= lcs) THREE POLE 100 A 25 kA ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 7540.55 7540.55 1.0 False None None False None False 7540.55 0 2917403 95989 None 5.15.2 Supplying and fixing Moulded Case Circuit Breaker (MCCB) .over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of Overload and Short circuit with thermal Magnetic/Micro processor release and Earth Fault as per IS-13947. (lcu= lcs) THREE POLE 125 A 25 kA ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 10652.92 10652.92 1.0 False None None False None False 10652.92 0 2917404 95989 None 5.19.8 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. II - Double Door 8 Way SP & N ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 2297.11 2297.11 1.0 False None None False None False 2297.11 0 2917405 95989 None 5.19.14 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. II - Double Door 12 Way TP & N ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 10822.67 10822.67 1.0 False None None False None False 10822.67 0 2917406 95989 None 5.18.1 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32Amps SP ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 514.19 514.19 15.0 False None None False None False 7712.85 0 2917407 95989 None 5.18.8 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 40 A TPN ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 3771.52 3771.52 2.0 False None None False None False 7543.04 0 2917408 95989 None 5.18.9 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 50-63Amps TPN ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 3826.03 3826.03 1.0 False None None False None False 3826.03 0 2917409 95989 None 5.7.2 Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers 32Amps ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 298.6 298.6 1.0 False None None False None False 298.6 0 2917410 95989 None 5.7.3 Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers 63Amps ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 496.84 496.84 1.0 False None None False None False 496.84 0 2917411 95989 None 5.12.1 Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution) 63Amps ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 8525.56 8525.56 1.0 False None None False None False 8525.56 0 2917412 95989 None I-5.23 Supplying, fixing and wiring 0 to 30V Direct Reading DC Voltmeter/Ammeter. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 854.91 854.91 1.0 False None None False None False 854.91 0 2917413 95989 None I-5.25 Supplying, fixing and wiring 0 to 100 A Direct Reading AC analog type Ammeter ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 649.24 649.24 1.0 False None None False None False 649.24 0 2917414 95989 None I-5.26 Supplying, fixing and wiring 0 to 1500A CT operated AC analog type Ammeter without CT ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 594.72 594.72 1.0 False None None False None False 594.72 0 2917415 95989 None I-5.33 Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 11541.29 11541.29 1.0 False None None False None False 11541.29 0 2917416 95989 None I-5.27 Supplying, fixing and wiring rotary selector switch suitable for Ammeter ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 247.8 247.8 1.0 False None None False None False 247.8 0 2917417 95989 None I-5.28 Supplying, fixing and wiring rotary selector switch suitable for Voltmeter ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 198.24 198.24 1.0 False None None False None False 198.24 0 2917418 95989 None I-5.29 Supplying, fixing and wiring 3 Phase Digital Ammeter ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 1765.58 1765.58 2.0 False None None False None False 3531.16 0 2917419 95989 None I-5.38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C (48/6.36) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 638.09 638.09 3.0 False None None False None False 1914.27 0 2917420 95989 None I-5.34 Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound (48/6.32) ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 696.32 696.32 3.0 False None None False None False 2088.96 0 2917421 95989 None I-5.30 Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 20A single phase Class-1 Accuracy with Temper Proof Energy Meter. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. Each 1709.82 1709.82 3.0 False None None False None False 5129.46 0 1709620942000 0 None None Buildings CONSTRUCTION OF DISTRICT INTEGRATED PUBLIC HEALTH LABORATORY IN THE PREMISES OF DISTRICT HOSPITAL at MYSURU. (Consultancy Charges) 78300.0 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2917422 95990 None 1.0.0 Preparation of detailed Architectural drawings,Structural design and drawings including Soil exploration as per I.S Codes and proof checking by IISC/NIT/IIT only as decided by the Department and the same has to be furnished to the Department for approval and also providing consultancy for Architectural & structural designs & Drawings and Elevations floor wise, preparation of internal and external Electrical works schematic drawings and working drawings for public health engineering drawings, interior layout etc and liaison with other department and approval of pollution control board & any other statutory approval from the concerned dept and drawings related to this project. (6 sets of as built drawings shall be submitted to the employer) Note - All required service GFC drawings required for completion of projects. - etc., complete including all lead and lift and work to be executed as per the specification and engineer -in-charge of the work. ---- etc., complete as per specification with all lead and lift and as per directions of the Engineer-in-charge of the work. LS 78300.0 78300.0 1.0 False None None False None False 78300.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1709620943000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1709620943000 1 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1709620943000 1 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of Karnataka public Procurement on or before the last date and time of bid submission. None 1709628386000 0 None None ELIGIBILITY The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of Karnataka public Procurement portal due to internet connectivity issues and technical glitches at bidders end None 1709628399000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection None 1709628410000 0 None None ELIGIBILITY Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder None 1709628421000 0 None None ELIGIBILITY The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs None 1709630004000 0 None None ELIGIBILITY Conditional tenders will not be accepted. None 1709630432000 0 None None ELIGIBILITY All the formats prescribed in the bid document shall be filled by the tenderer in complete manner. None 1709630448000 0 None None ELIGIBILITY Royalty on construction materials and other taxes will be deducted as per prevailing Govt., orders as may be modified from time to time. None 1709630461000 0 None None ELIGIBILITY Any discrepancies observed in the documents uploaded by the tenderer the tender shall liable to rejected. None 1709630474000 0 None None ELIGIBILITY Earnest Money Deposit will have to be in any one of the forms as per the instructions in the financial bid document and shall have to be valid for 45 days beyond the validity of the tender. None 1709630487000 0 None None ELIGIBILITY All formats prescribed in the bid documents shall be filled in complete manner (section 2 & of the bid document)and shall be uploaded properly, signed by tenderer. Necessary certificates shall be uploaded along with the formats wherever required. General documents section can be used for this purpose None 1709630506000 0 None None ELIGIBILITY Tenderers are required to read the Bid Documents carefully before submission of their bid. None 1709630536000 0 None None ELIGIBILITY If the tenderer quotes bid price below the estimated contract value (Amount put to tender) then the tenderer has to submit the additional security deposit equal to the difference in cost and the additional security deposit should have a validity for the period of execution. None 1709630549000 0 None None ELIGIBILITY If the numbers of page to be attached in one particular attachment is more, then all the pages can be put into one folder, zipped and then attached or else all the pages can be pasted in one word file and then this word file could be converted to PDF (portable documents format) format and then attached. (Please contract help desk from 9.00 AM to 9.00 PM ( Monday to Saturday) Ph No: 91-8046010000 and 91-8068948777 or send query through Karnataka public procurement portal through query option on or before specified time. None 1709630561000 0 None None ELIGIBILITY The Contractor shall strictly take all reasonable steps to protect the environment on and off the site and to avoid damage or nuisance to persons or to property of the public or others resulting from pollution, noise or other causes arising as a consequence of his methods of operation. None 1709630572000 0 None None ELIGIBILITY Materials like, steel (primary), cement, bitumen etc., required for the work shall be procured by the tenderer themselves and should be got tested positive by the quality control authority before use on the work. None 1709630584000 0 None None ELIGIBILITY Tenderer should have latest GST Registration and latest clearance certificate in their name None 1709630595000 0 None None ELIGIBILITY The Rates quoted by the tenderer shall be inclusive of GST. None 1709630606000 0 None None ELIGIBILITY Special Instructions to tenderers - as per bid document. None 1709630617000 0 None None ELIGIBILITY The Defects Liability Period is 1 year from the date of completion of the work. None 1709630630000 0 None None ELIGIBILITY Total value of Civil Engineering Construction works executed in the and payments received in the last five year i.e., 2018-19, 2019-20, 2020-21 2021-22 & 2023-24. None 1709630644000 0 None None ELIGIBILITY The Tenderers are bound to furnish the original certified documents to the employer within 3 days from the day of opening of technical bid for verification, failing which the bid of tenderer will be considered as technically non responsive. None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender) None None None None None None Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction) None None None None None None Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx) None None None None None None Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period) None None None None None None Total value of civl engineering works executed and payments received in the last five years (year-wise) None None None None None None List of existing commitments and ongoing works None None None None None None List of works for which tenders already submitted None None None None None None Banker Details for reference None None None None None None Clause ITT 3.2(e):To qualify for award of this contract, each Tenderer in his/its name should have in the last five years i.e. (2018-19 to 2022-23) as prime contractor.The Tenderer or his identified sub-contractor should possess valid license issued by BWSSB/KUWS&DB for executing water supply/sanitary engineering works and should have executed similar building water supply/sanitary engineering works totaling Rs.1.60 Lakhs in any one financial year. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- Work done certificate issued by the officer not lessthan the rank of Executive Engineer None None None None Clause ITT 3.2(d):To qualify for award of this contract, each Tenderer in his/its name should have in the last five years i.e. (2018-19 to 2022-23) as prime contractor.The tenderer or his identified sub contractor should possess required valid electrical license issued by KPWD/Government electrical Inspectorate for executing building electrification works and should have executed similar building electrical works totaling Rs.5.00 Lakhs in any one financial year. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- Work done certificate issued by the officer not lessthan the rank of Executive Engineer None None None None Clause ITT 3.2(b):To qualify for award of this contract, each Tenderer in his/its name should have in the last five years i.e. (2018-19 to 2022-23) as prime contractor.(b) Satisfactorily completed at least one similar nature of Building work of value not less than Rs.53.00 lakhs as a prime contractor. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- Work done certificate issued by the officer not lessthan the rank of Executive Engineer None None None None To qualify for award of this contract, each Tenderer in his / its name should have in the last five years i.e. (2018-19 to 2022-23)as a prime contractor. Clause 3.2(c) To qualify for award of this contract, each Tenderer in his/its name should have in the last five years i.e.(2018-19 to 2022-23). Executed in any one year, the following minimum quantities of work Sl. No Description of key items of works Quantity 1)Earthwork Excavation 599.00Cum, 2)RCC and PCC 154.00 Cum 3) Steel Reinforcement for RCC work 13.00Kgs4)Flooring/Dadooing(Vitrified/Granite/Ceramic/Cementconcrete/cladding/dadooing)365.00Sqmtr, 5)Plastering 2442.00 Sqm,6) Weather Proof Course.284.00Sqmtr. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- Certificate to be issued by the officer not lessthan the rank of Executive Engineer None None None None PWD Class-III & Above Registration Certificate Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None PWD Registration Certificate (Class I/II/III/IV) None None None None Clause 3.6 Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated for prime contractor are as under Assessed available tender capacity AxNx1.5- B Where A maximum value of civil engineering works executed in any one year during the last five years 2018-19 to 2022-23 updated to 2023-24 price level taking into account the completed as well as works in progress. N Number of years prescribed for completion of the works for which tenders are invited. B Value, at 2023 24 price level of existing commitments and ongoing works to be completed during the next 06 months. Note The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- certificate issued by the officer not lessthan the rank of Executive Engineer Ongoing commitments and Bids submitted for the works None None None None Clause ITT 3.2(a):To qualify for award of this contract, each Tenderer in his/its name should have in the last five years i.e. (2018-19 to 2022-23) as prime contractor.(a) Achieved in at least two financial years a minimum annual financial turnover (in all classes of civil Engineering construction works only) of Rs.210.00Lakhs. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Clause 3.3 (b) Liquid assets and /or availability of credit facilities of not less than Rs.32.00 Lakhs Lakhs (Credit lines/letter of credit/ certificates from banks for meeting the fund requirement etc.(As per the prescribed format in clause 1.10 of SECTION 3, QUALIFICATION INFORMATION of this document.) Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit
tenderCriterionDocumentList	documentName optional documentTypeText Annual Turnover Certificate Issued by Chartered Accountant True Technical Bid PWD Class-III & Above Registration Certificate Registration Certificate issued by Chief Engineer, PWD. True Technical Bid GST Certificate True Technical Bid ESI & EPF Certificate True Technical Bid Work done Certificate issued by Not below the rank of Executive Engineer. True Technical Bid
tenderWorkLocationList
tenderAddress	createdTs 1709635619000 version 0 createdDate None modifiedDate None blockNumber Arogya Soudha, 3rd Floor, Leprosy Hospital Premises 1st Cross, Magadi Road street None city Bengaluru state Karnataka pin 560023
tenderRecallDTO	None