createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1709639607570 version 3 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 2120.00 emd 200000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 06-04-2024 17:30:00 tenderQueryClose 14-03-2024 15:00:00 technicalBidOpen 10-04-2024 11:00:00 publishedDate 06-03-2024 13:35:47 publishedByPost MESCOM_SE_TECH_MNG publishedByUser KPE11354 - H N RAMESHA bidValidityPeriod 180 noOfCalls 1 preBidMeetingDate None preBidMeetingYn False preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Prashanth splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber None mobileNumber 9448289415 tenderSupplierList None
tenderSchedule	createdTs 1709639607601 version 8 createdDate None modifiedDate None tenderNumber MESCOM/2023-24/BD/WORK_INDENT217 title Construction of one Block of 4 LM Quarters at Konandur description Construction of one Block of 4 LM Quarters at Konandur category WORKS categoryText Works ecv 8474257.85 deptName Mangalore Electricity Supply Company Limited status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 8079 locationName MESCOM Superintending Engineer Tech Corporate Office Managaluru provisionalAmount 10000000.0 groupOverheadTotal None fileNumber MESCOM/SEET/EEC-2
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1709639608000 0 None None Buildings Construction of one Block of 4 LM Quarters at Konandur 8474257.85 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2923878 96404 None 001 Earth work excavation for Foundation by mechanical means for allworks & depth upto 3 m, as per drawing and technical specifications,including setting out, shoring, strutting, barricading, caution lights,including dressing of excavated surfaces, disposing off or levelling theexcavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the workIn all kinds of soils Depth upto 3 m Cum 75.19 75.19 200.0 False None None False None False 15038.0 0 2923879 96404 None 002 Filling available excavated earth excluding rock in trenches, plinth,sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 210.12 210.12 150.0 False None None False None False 31518.0 0 2923880 96404 None 003 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or priorexcavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work.Deduct 5% per if rollers are not used and tamping is done manually Cum 393.36 393.36 155.0 False None None False None False 60970.8 0 2923881 96404 None 004 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness,well compacted using plate vibrators, including all lead & lifts, cost ofall materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:4:8 M5 Using 40 mm nominal size graded crushed coarse aggregates Cum 5362.18 5362.18 60.0 False None None False None False 321730.8 0 2923882 96404 None 005 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. The cost of steel reinforcement & formwork shall be paid separately Mix 1:3:6 M10 Using 20 mm nominal size graded crushed coarse aggregates Cum 5899.84 5899.84 30.0 False None None False None False 176995.2 0 2923883 96404 None 006 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. The cost of steel reinforcement & formwork to be paid separately. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For Footing Cum 6610.99 6610.99 24.0 False None None False None False 158663.76 0 2923884 96404 None 007 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. The cost of steel reinforcement & formwork to be paid separately. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For Plinth Beam Cum 9181.94 9181.94 10.15 False None None False None False 93196.691 0 2923885 96404 None 008 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. The cost of steel reinforcement & formwork to be paid separately. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For Sump Cum 6733.42 6733.42 3.77 False None None False None False 25384.9934 0 2923886 96404 None 009 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes alllead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technicalspecifications. The cost of steel reinforcement, dowel bars to be paid separately.form work is included P. No. 17, I. 2.5.1 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & Shuttering charges as per Appendix 1 For GF Column Cum 10824.68 10824.68 11.9 False None None False None False 128813.692 0 2923887 96404 None 010 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes alllead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technicalspecifications. The cost of steel reinforcement, dowel bars to be paid separately form work is included P. No. 17, I. 2.5.1 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & Shuttering charges as per Appendix 1 For GF Lintel Beam and Roof beam Cum 10187.94 10187.94 13.18 False None None False None False 134277.0492 0 2923888 96404 None 011 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes alllead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technicalspecifications. .The cost of steel reinforcement, dowel bars to be paid separately.form work is included .P. No. 17, I. 2.5.1.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & Shuttering charges as per Appendix 1 V.1, P.115, Ino.8 For GF Roof Slab Cum 9551.19 9551.19 28.899 False None None False None False 276019.83981 0 2923889 96404 None 012 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes alllead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technicalspecifications. .The cost of steel reinforcement, dowel bars to be paid separately.form work is included .P. No. 17, I. 2.5.1.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & Shuttering charges as per Appendix 1 V.1, P.115, Ino.8 For GF Staircase Cum 9232.82 9232.82 3.19 False None None False None False 29452.6958 0 2923890 96404 None 013 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes alllead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technicalspecifications. .The cost of steel reinforcement, dowel bars to be paid separately.form work is included .P. No. 17, I. 2.5.1.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & Shuttering charges as per Appendix 1 V.1, P.115, Ino.8 do First Floor columns Cum 10824.68 10824.68 9.64 False None None False None False 104349.9152 0 2923891 96404 None 014 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes alllead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technicalspecifications. .The cost of steel reinforcement, dowel bars to be paid separately.form work is included .P. No. 17, I. 2.5.1.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & Shuttering charges as per Appendix 1 V.1, P.115, Ino.8 do First Floor Beams Cum 10187.94 10187.94 13.18 False None None False None False 134277.0492 0 2923892 96404 None 015 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes alllead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technicalspecifications. .The cost of steel reinforcement, dowel bars to be paid separately.form work is included .P. No. 17, I. 2.5.1.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & Shuttering charges as per Appendix 1 V.1, P.115, Ino.8 do First Floor Slab Cum 9273.0 9273.0 28.899 False None None False None False 267980.427 0 2923893 96404 None 016 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes alllead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technicalspecifications. .The cost of steel reinforcement, dowel bars to be paid separately.form work is included .P. No. 17, I. 2.5.1.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & Shuttering charges as per Appendix 1 V.1, P.115, Ino.8 do First Floor Staircase Cum 9232.82 9232.82 5.08 False None None False None False 46902.7256 0 2923894 96404 None 017 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes alllead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technicalspecifications. .The cost of steel reinforcement, dowel bars to be paid separately.form work is included .P. No. 17, I. 2.5.1.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & Shuttering charges as per Appendix 1 V.1, P.115, Ino.8 do Second Floor columns Cum 10824.68 10824.68 1.49 False None None False None False 16128.7732 0 2923895 96404 None 018 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes alllead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technicalspecifications. .The cost of steel reinforcement, dowel bars to be paid separately.form work is included .P. No. 17, I. 2.5.1.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & Shuttering charges as per Appendix 1 V.1, P.115, Ino.8 do second Floor and terrace floor for lintels and beams Cum 10187.94 10187.94 2.29 False None None False None False 23330.3826 0 2923896 96404 None 019 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes alllead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technicalspecifications. .The cost of steel reinforcement, dowel bars to be paid separately.form work is included .P. No. 17, I. 2.5.1.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & Shuttering charges as per Appendix 1 V.1, P.115, Ino.8 do second Floor and terrace floor for roof slabs, staircase, lintels and beams Cum 9273.0 9273.0 3.71 False None None False None False 34402.83 0 2923897 96404 None 020 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes alllead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technicalspecifications. .The cost of steel reinforcement, dowel bars to be paid separately.form work is included .P. No. 17, I. 2.5.1.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates & Shuttering charges as per Appendix 1 V.1, P.115, Ino.8 do chejja Cum 9232.82 9232.82 2.3 False None None False None False 21235.486 0 2923898 96404 None 021 Providing Thermo.Mechanically Treated bars of grade Fe.550 for R.C.C. work including straightening,cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. .The laps and wastages shall not be measured separately. PWD SR 2021.22 Vol 2 P . 84 / I . 11.32 for Ground Floor Kgs 85.49 85.49 15300.0 False None None False None False 1307997.0 0 2923899 96404 None 022 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 .1 cement : 6 coarse sand. including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work..P.No.13 IT.No.6.2 of PWD VOL.2 SR 2021.22. for Ground Floor. Cum 6896.88 6896.88 80.0 False None None False None False 551750.4 0 2923900 96404 None 023 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 .1 cement : 6 coarse sand. including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work..P.No.13 IT.No.6.2 of PWD VOL.2 SR 2021.22. for Ground Floor. do First Floor Cum 6898.88 6898.88 80.0 False None None False None False 551910.4 0 2923901 96404 None 024 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 .1 cement :4 coarse sand. including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work..PWD SR 2021.22 Vol 2 P .14 / I . 6.15 for Ground Floor. Sqm 891.98 891.98 120.0 False None None False None False 107037.6 0 2923902 96404 None 025 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 .Part . I. . 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. .PWD SR Vol.2 2022.23/P.No.17/6.32. Basic Rate. 1196.00 Sqm 1231.88 1231.88 95.0 False None None False None False 117028.6 0 2923903 96404 None 026 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding .KPWD SR Vol.2 2022.23/P.No.85/11.34A . Basic Rate 131.00 Kgs 134.93 134.93 1438.0 False None None False None False 194029.34 0 2923904 96404 None 027 Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves .excluding cost of cement concrete and side clamps., but including cost of materials, labour, HOM of machineries complete as per specifications. PWD SR 2021.22 Vol 2 P 99 / I . 12.11 Cum 93104.79 93104.79 1.85 False None None False None False 172243.8615 0 2923905 96404 None 028 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets .core veneer. hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 .part.I. 1991. from manufacturer complete as per spcification. 35 mm thick both side Teak .KPWD SR Vol.2 2022.23/P.No.106/12.57.4. Basic Rate. 3921.00 Sqm 4017.0 4017.0 25.0 False None None False None False 100425.0 0 2923906 96404 None 029 SOLID PANEL PVC DOOR SHUTTER Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm fro styles and 15x15mm for top & bottom rails, covered with heat moulded PVC C channel of 5mm thick sheet & 30 x 50mm wide to form styles & 5mm thick & 75mm wide PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick 20mm wide PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet fitted in the M.S. Frame, Sealed to the styles & rails with 5x30mm PVC sheet beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer.in.charge fixed to frames with 3 nos of 75 m.m Aluminium hinges. .I.no. 9.83 P.no 60. Sqm 2874.73 2874.73 11.0 False None None False None False 31622.03 0 2923907 96404 None 030 Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. . excluding cost of fixtures . PWD SR 2021.22 Vol 2 P .100 / I . 12.15 Sqm 5226.22 5226.22 14.0 False None None False None False 73167.08 0 2923908 96404 None 031 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer.in.charge. .Glazing, paneling and dash fasteners to be paid for separately. :For Fixed Portion: Powder coated aluminium .minimum thickness of powder coating 50 micron. including cost of materials, labour, usage charges of machinery complete as per specifications.PWD SR 2021.22 Vol 2 P .86 / I . 11.35.1.2 all floors Kgs 399.64 399.64 200.0 False None None False None False 79928.0 0 2923909 96404 None 032 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprenegasket etc. Aluminium sections shall be smooth, rust free, straight,mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer.in.charge. .Glazing, paneling and dash fasteners to be paid for separately. :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required .Fittings shall be paid for separately. Powder coated aluminium .minimum thickness of powder coating 50 micron. including cost of materials, labour, usage charges of machinery complete as per specifications.PWD SR 2021.22 Vol 2 P .87 / I . 11.35.2.1 all floors Kgs 436.72 436.72 200.0 False None None False None False 87344.0 0 2923910 96404 None 033 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer.in.charge . .Cost of aluminium snap beading shall be paid in basic item.:With float glass panes of 5 mm thickness .weight not less than 12.50 kg/m². including cost of materials, labour, usage charges of machinery complete as per specifications.PWD SR 2021.22 Vol 2 P .88 / I . 11.37.2 all floors Sqm 943.48 943.48 55.0 False None None False None False 51891.4 0 2923911 96404 None 034 Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer.in.charge complete: Upto 5mm depth and 5 mm width including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineerin. Charge.PWD SR 2021.22 Vol 2 P .90 / I . 11.42.1 all floors Mtr 53.56 53.56 110.0 False None None False None False 5891.6 0 2923912 96404 None 035 Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete.Powder coated minimum thickness 50 micron aluminium including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer.in.Charge.PWD SR 2021.22 Vol 2 P .92 / I . 11.49.2 all floors Nos 73.13 73.13 64.0 False None None False None False 4680.32 0 2923913 96404 None 036 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications.PWD SR 2021.22 Vol 2 P 65 / I .9.39 all floors Sqm 1068.11 1068.11 290.0 False None None False None False 309751.9 0 2923914 96404 None 037 Providing and laying Ceramic glazed floor tiles of size 300x300 mm .thickness to be specified by the manufacturer., of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 .1 Cement : 4 Coarse sand., jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. .KPWD SR Vol.2 2022.23/P.No.60/9.11. Basic Rate. 762.00 Sqm 784.86 784.86 50.0 False None None False None False 39243.0 0 2923915 96404 None 038 Providing and laying vitrified floor tiles in different sizes .thickness to be specified by the manufacturer. with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 .1 cement : 4 coarse sand., jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm .KPWD SR Vol.2 2022.23/P.No.60/9.12.2. Basic Rate. 1087.00 Sqm 1119.61 1119.61 230.0 False None None False None False 257510.3 0 2923916 96404 None 039 Providing and laying flooring and steps fine dressed granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. PWD SR 2021.22 Vol 2 P 64 / I .9.30 all floors Sqm 2466.85 2466.85 45.0 False None None False None False 111008.25 0 2923917 96404 None 040 Providing, laying & fixing cement base, precast, pre polished cement concrete, designer tiles 25mm thick conforming to IS 1237 heavy duty tiles for flooring, treads of steps and landing, laid on a bed of 12mm thick cement mortar 1:3 mis finished with flush pointing using white cement, including cost of materials, mortar, including cutting, griding the edge to half/full round wherever required, labour, curing complete as per specification. PWD SR 2021.22 Vol 2 P 65 / I .9.40 Sqm 1166.99 1166.99 25.0 False None None False None False 29174.75 0 2923918 96404 None 041 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 .1 cement: 4 fine sand. including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer.in.charge.. For Ground Floor..P.No.41,I.No.8.2.1 of PWD VOL.2 SR 2021.22. Sqm 255.44 255.44 220.0 False None None False None False 56196.8 0 2923919 96404 None 042 Providing 20 mm cement plaster of mix :1:6 .1 cement: 6 fine sand. to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer.in.charge. .KPWD SR Vol.2 2022.23/P.No.41/8.3.2. Sqm 284.28 284.28 900.0 False None None False None False 255852.0 0 2923920 96404 None 043 Providing 20 mm cement plaster of mix :1:6 .1 cement: 6 fine sand. to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer.in.charge. .KPWD SR Vol.2 2022.23/P.No.41/8.3.2. do First Floor inside plastering Sqm 289.43 289.43 570.0 False None None False None False 164975.1 0 2923921 96404 None 044 Providing 20 mm cement plaster of mix :1:6 .1 cement: 6 fine sand. to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer.in.charge. .KPWD SR Vol.2 2022.23/P.No.41/8.3.2. do First Floor outside plastering Sqm 289.43 289.43 450.0 False None None False None False 130243.5 0 2923922 96404 None 045 Providing 20 mm cement plaster of mix :1:4 .1 cement: 4 fine sand. to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer.in.charge. .KPWD SR Vol.2 2022.23/P.No.41/8.3.1. Sqm 307.97 307.97 400.0 False None None False None False 123188.0 0 2923923 96404 None 046 Providing 12 mm cement plaster with Cement mortar 1:3 .1 cement: 3 coarse sand. finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per pecifications and as per directions of Engineer.in.charge. For External wall Plastering..P.No.42,I.No.8.6.1 of PWD VOL.2 SR 2021.22. Sqm 282.22 282.22 390.0 False None None False None False 110065.8 0 2923924 96404 None 047 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Special primer applied @ 0.75 ltr /10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt,dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer.in.charge. PWD SR 2021.22 Vol 2 P 46 / I .8.33 Sqm 121.54 121.54 1825.0 False None None False None False 221810.5 0 2923925 96404 None 048 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer inchargePWD SR 2021.22 Vol 2 P 50 / I .8.51 Sqm 85.49 85.49 1200.0 False None None False None False 102588.0 0 2923926 96404 None 049 Applying priming coats with primer of approved brand and manufacture, having low VOC .Volatile Organic Compound. content. With ready mixed pink or grey primer on wood work .hard and soft wood. having VOC content less than 50 grams/ litre as per specifications and as per directions of Engineer in chargePWD SR 2021.22 Vol 2 P 51 / I .8.55.1 Sqm 42.23 42.23 120.0 False None None False None False 5067.6 0 2923927 96404 None 050 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer.in.charge.PWD SR 2021.22 Vol 2 P 48 / I .8.41 Sqm 133.9 133.9 110.0 False None None False None False 14729.0 0 2923928 96404 None 051 Providing and laying heavy duty cobble stones 75mm thick interlock pavers, using cement and course sand for manufacture of blocks of approved size, shape and colour with a minimum compressive strength of 30 MPa as per IRC 63:2018 & IS 15658 over 50mm thick sand bed .average thickness. and compacting with plate vibrator having 3 tons compaction force thereby forcing part of sand underneath to come up in between joints, final compaction of paver surface joints into its final level, including cost of materials, labour and usage charges of machinery complete as per specifications .PWD SR Vol.2 2022.23.P.No. 64/9.32 Basic Rate. 1145.00 Sqm 1179.35 1179.35 90.0 False None None False None False 106141.5 0 2923929 96404 None 052 Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm .inner dimensions. with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover..T130C...PWD SR 2021.22 Vol 5 P . 187 / I .10 No 3979.92 3979.92 4.0 False None None False None False 15919.68 0 2923930 96404 None 053 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm .inner dimensions. with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.. Page.187/T130B Basic Rate.4977.00 No 5126.31 5126.31 6.0 False None None False None False 30757.86 0 2923931 96404 None 054 Providing and fixing white vitreous china pedestal type .European type/ wash down type. water closet pan.PWD SR 2021.22 Vol 2 P 125 / I .14.15 Pan 1886.96 1886.96 4.0 False None None False None False 7547.84 0 2923932 96404 None 055 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps .KPWD SR Vol.2 2022.23/P.No.123 /14.7.1. Basic Rate. 2529.00 Unit 2604.87 2604.87 4.0 False None None False None False 10419.48 0 2923933 96404 None 056 Providing and fixing PVC Nahani trap of approved make conforming to IS specifications. Including cost of all materials, labour charges, etc complete. .MR. No 225.17 225.17 16.0 False None None False None False 3602.72 0 2923934 96404 None 057 Providing and fixing brass bib cock of approved quality :20 mm nominal boreSR 2021.22 Vol 2 P 115/ I .13.2.2 Each 355.35 355.35 24.0 False None None False None False 8528.4 0 2923935 96404 None 058 Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required: White glazed fire clay kitchen sink of size 600x450x 250 mm PWD SR 2021.22 Vol 2 P 125 / I .14.9.1 Nos 2590.45 2590.45 4.0 False None None False None False 10361.8 0 2923936 96404 None 059 Providing and laying platform using prepolished water cut/gang saw 40 mm thick telphonic Black Granite. Laid on existing vertical supports and fixing in 1:3 CM proportion. Cinluding cutting to required shape, pattern with paper joints, including full rounding for nosing finished with cement mortar pointed with colour pigments to match the colour of slab making through jointing with sealant, making holes 25mm x 12 mm grooves in joints including cost of all material, mortar, labour curing etc., complete as per specfication. .P.No. 110, I. 14.52. Sqm 3630.75 3630.75 10.0 False None None False None False 36307.5 0 2923937 96404 None 060 Fabrication, supplying & erection M.S.Angular Truss for all spans as per approved designs and drawing.The entire truss is anchored suitably by using 4 Nos of M.S. ancghor bolts at each support , with base plate and shoe plate . The work including cutting , straightening, placing in position of M.S. angle ang welding wherever necessary and applying one coat of red oxide primer coat to all the members including cost of all materials , labour charge , & hire charge of machineries for cutting , welding, grinding & erection equipments. etc., complete as per specification. . P.No. 43, I.No.7.30. Kg 130.81 130.81 300.0 False None None False None False 39243.0 0 2923938 96404 None 061 Providing and fixing Steel work in built up tubular .round, square or rectangular hollow tubes etc.. trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer.in.Charge.PWD SR 2021.22 Vol 2 P .81 / I . 11.16.1 Kg 112.27 112.27 500.0 False None None False None False 56135.0 0 2923939 96404 None 062 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer.in.Charge.PWD SR 2021.22 Vol 2 P .75 / I . 11.5.1 Sqm 3769.8 3769.8 1.8 False None None False None False 6785.64 0 2923940 96404 None 063 Providing and laying cinder concrete in cement 1:15 . 1 cement : 15 cinder of 12.5mm nominal guage. on terraced roof or sunken slabs, laid to slope compacting , including cost of materials, labour, curing, complete as per specifications.PWD SR 2021.22 Vol 2 P 23 / I .7.18 all floors Cum 2077.51 2077.51 3.0 False None None False None False 6232.53 0 2923941 96404 None 064 Providing and fixing chlorinated poly vinyl chloride . CPVC. pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. 20 mm dia pipe nominal OD pipes .PWD SR 2021.22 Vol 2 P . 119 / I . 13.32.2. m 384.19 384.19 35.0 False None None False None False 13446.65 0 2923942 96404 None 065 Providing & fixing Chorinated Poly Venyl Chloride .CPVC. pipes having stability for hot and cold water supply including all CPVC plain and brass threaded fittings this include jointing of pipes and fittings with one step cpvc solvent cement, trenching, refilling and testing of joints complete as per direction of engineer incharge of work.External work Corrigendum and Addendum order 25 mmdia I . 13.33.3 m 325.48 325.48 230.0 False None None False None False 74860.4 0 2923943 96404 None 066 Providing and fixing to wall, ceiling and floor, medium density polyethylene pipes 6.00 kgf/sq.cm working pressure 50mm dia outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor, including cost of all materials, labour charges, HOM of equipments and testing complete as per specifications. .P. No.96 , I. No. 13.70.1. 50 mm dia m 268.83 268.83 50.0 False None None False None False 13441.5 0 2923944 96404 None 067 Providing and installing at site of work P.V.C. pipes including cost ofpipes and specials and labour, including lowering into trenches, layingtrue to line, level and perfect linking at joints leak proof includingjointing of approved type with all labour charges and all lift charges,handling charges including encasing the pipe around to a depth not lessthan 15 cms with gravel or selected earth available from the excavation etc. complete110mm .weight of pipe .1.315 kg. .PWD SR 2021.22 Vol 5 P 140 / I .13.3. m 405.82 405.82 85.0 False None None False None False 34494.7 0 2923945 96404 None 068 Providing and installing at site of work P.V.C. pipes including cost ofpipes and specials and labour, including lowering into trenches, layingtrue to line, level and perfect linking at joints leak proof includingjointing of approved type with all labour charges and all lift charges,handling charges including encasing the pipe around to a depth not lessthan 15 cms with gravel or selected earth available from the excavation etc. complete160mm.weight of pipe .1.315 kg..PWD SR 2021.22 Vol 5 P 140/ I .13.5 m 616.97 616.97 10.0 False None None False None False 6169.7 0 2923946 96404 None 069 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. .KPWD SR Vol.2 2022.23/P.No. 130/14.40.2. Basic Rate. 380.00 Unit 391.4 391.4 4.0 False None None False None False 1565.6 0 2923947 96404 None 070 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S.tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineerin.Charge. .KPWD SR Vol.2 2022.23 Item No:11.26.1. Basic Rate. 111.00 Kgs 114.33 114.33 400.0 False None None False None False 45732.0 0 2923948 96404 None 071 Providing and placing on Terrace at all floor levels. Poly Ethylene Water stoarge tanks, IS . 12701 Marked, with cover and suitable locking arrangements and making necessary holes for inlet outlet and over flow pipes but without fittings and the base support for tanks .KPWD SR Vol.2 2022.23 Item No:13.34. Basic Rate. 8.00 Nos. 8.24 8.24 4000.0 False None None False None False 32960.0 0 2923949 96404 None 072 Supply and delivery of submerssible pump set 1.0HP/230V/1 Ph/50Hz/AC of satisfying performance characterstics with ISO certification. Including cost of materials, labour and HOM of machineries complete as per the direction of Engineer.in.charge of work. .P.No, XLIII , Sl.No.12 . 18 stage Nos. 15583.9 15583.9 4.0 False None None False None False 62335.6 0 2923950 96404 None 073 Supplying and installing at site wordrob steel doors of different size manufactured using high quality CR sheets of 18G weighing 10.28 kg for doors and 40x40 size square tube of 11 G weighing 3.19kg for good quality locks with spare keys. With handles. Welded and fabricated with good finish and coated with sprayed enamel paint of approved quality and shade with all lead, lift and applicable taxes as per design and drawing and direction of Engineer in charge of work. Kgs 154.0 154.0 50.0 False None None False None False 7700.0 0 2923951 96404 None 074 Concealed conduit system : supplying 25mm dia, 2mm thick heavy guage PVC conduit pipe with suitable size bends, metal / PVC junction boxes adhesives paste etc., and running before concreting slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of juntion boxes and pipe ends should be covered using PVC end enclosures run with 18 SWG GI fish wire wherever necessary. .Ele SR 2022.23, 1.2.2, P No.1. m 70.0 70.0 530.0 False None None False None False 37100.0 0 2923952 96404 None 075 Groove cutting : supplying 25mm dia, 2mm thick heavy guage PVC conduit pipe with bends, metal junction boxes adhesives paste etc., and bracing U or J hooks and cement plastering upto the surface of the brick level and run with 18 SWG GI fish wire wherever necessary. .Ele SR 2022.23, 1.3.2, P No.1. m 80.0 80.0 220.0 False None None False None False 17600.0 0 2923953 96404 None 076 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm .Phase & Neutral. & 1x1.0 sqmm .Earth wire. FRLS multi strand PVC insulated copper wire .confirming to IS.694: and latest amendments. without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.. Short point upto 3 mtrs from tapping point to out let via switch. using class A materials.Ele SR 2022.23, 2.2.1, P No.3. Point 251.0 251.0 32.0 False None None False None False 8032.0 0 2923954 96404 None 077 do Medium point above 3 mtrs up to 6 mtrs from tapping point to out let via switch box, using class A materials .Ele SR 2022.23, 2.2.2, P No.3. Point 361.0 361.0 35.0 False None None False None False 12635.0 0 2923955 96404 None 078 do Long point above 6M upto 10mtr from tapping point to out let via switch box,using class A materials .Ele SR 2022.23, 2.2.3, P No.3. Point 542.0 542.0 24.0 False None None False None False 13008.0 0 2923956 96404 None 079 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V Grade, multistrand Copper with low conductor resistnce single core wire in open or concealed system of wiring as per IS.694:1990 & confirming to GTP of GROUP.A.1.5 sqmm .PWD Ele SR 2022.23P .3/ I . 2.3.2. Mtr 26.0 26.0 560.0 False None None False None False 14560.0 0 2923957 96404 None 080 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V Grade, multistrand Copper with low conductor resistnce single core wire in open or concealed system of wiring as per IS.694:1990 & confirming to GTP of GROUP.A.1.5 sqmm .PWD Ele SR 2022.23P .3/ I . 2.3.2. do .2.5 sqmm .PWD Ele SR 2022.23P .3 / I . 2.3.3. Mtr 40.0 40.0 1150.0 False None None False None False 46000.0 0 2923958 96404 None 081 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V Grade, multistrand Copper with low conductor resistnce single core wire in open or concealed system of wiring as per IS.694:1990 & confirming to GTP of GROUP.A.1.5 sqmm .PWD Ele SR 2022.23P .3/ I . 2.3.2..4 sqmm .PWD Ele SR 2022.23 P .3 / I . 2.3.4. Mtr 59.0 59.0 650.0 False None None False None False 38350.0 0 2923959 96404 None 082 Supplying and fixing of modular switch/socket/stepped electronic fan regulator/ dimmer/ telephone socket etc on existing modular switch plate Is 3854 and IS 1293 .P No.10, I.No. 3.6.3. using Group A materials 6Amps 3way socket .PWD Ele SR 2022.23 P . 5 / I . 3.6.3 Each 162.0 162.0 40.0 False None None False None False 6480.0 0 2923960 96404 None 083 Supplying and fixing of modular switch/socket/stepped electronic fan regulator/ dimmer/ telephone socket etc on existing modular switch plate Is 3854 and IS 1293 using Group A materials Stepped fan regulator .PWD Ele SR 2022.23 P . 5 / I . 3.6.4. Each 313.0 313.0 12.0 False None None False None False 3756.0 0 2923961 96404 None 084 Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete254x178x76mm. . P No. 3, I. No.1.6.3. Each 101.0 101.0 8.0 False None None False None False 808.0 0 2923962 96404 None 085 Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete. 101x101x76mm . I.no.1.6.5 P.no 3. Each 69.0 69.0 30.0 False None None False None False 2070.0 0 2923963 96404 None 086 Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete.203x152x76mm . I.no.1.6.4 P.no 3. Each 75.0 75.0 14.0 False None None False None False 1050.0 0 2923964 96404 None 087 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 6A Lamp Holder. P No.06, I. No. 3.14.6. Group A Each 63.0 63.0 52.0 False None None False None False 3276.0 0 2923965 96404 None 088 Supply of round/square recess/surface mounted rollingtype LED Down light with W GU 10 LED Lamp RibFabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit ofaluminium die cast eye ball & LED Lamp position retained bycircular wire spring, with Life of 25000 burning hours & 70%lumen maintenance with CRI . 80. Power Input: 220.240V @50/60Hz & Power factor .0.9 along with CE approved. 2yearsWarranty against any manufacturing defect working understandard electrical condition. LED square or round down light 5.6W.PWD Ele SR 2022.23 P . 34 / I . 11.5.1. Each 546.0 546.0 25.0 False None None False None False 13650.0 0 2923966 96404 None 089 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50cycles. Single phase AC supply conforming to ISS.374.1979 and with double ball bearing system. 48 Sweep .1200mm. .PWD Ele SR 2022.23 P . 22 / I . 6.3.1. Each 2085.0 2085.0 12.0 False None None False None False 25020.0 0 2923967 96404 None 090 Fixing a ceiling/wall mounting fan of all capacities and all types to the existing .S. hook with fan regulator to the existing board together supplying and fixing a 5 amps ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring. .PWD Ele SR 2022.23 P . 46/ I . 13.10. Each 162.0 162.0 12.0 False None None False None False 1944.0 0 2923968 96404 None 091 Supplying of feet .PVC Batten with integrated LED tube .W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI . 80. Power Input: 220.240V@ 50/60Hz & Power factor . 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 4.. 20/22w .PWD Ele SR 2022.23 P . 34/ I . 11.3.2. Each 740.0 740.0 16.0 False None None False None False 11840.0 0 2923969 96404 None 092 Fixing all types and all capacities fluorescent /false ceiling/spot light/CFL/LED fittings indoor on the wall / ceiling / rafters / girders using 23 / 0.00076. twin twisted PVC insulated wires, required nos of round blocks and clamps. .PWD Ele SR 2022.23 P . 45 / I . 13.7.1. Each 119.0 119.0 16.0 False None None False None False 1904.0 0 2923970 96404 None 093 Supplying and Drawing 3 core flat PVC sheathed sumersible pump cable manufactured with electrolytic grade copper with flxible copper with low resistance conductor confirming to table 3 class 5 of IS: 8130.1984 and virgin grade PVC insulation and powder coating extruded PVC sheathed suitable for working voltage upto 1100Volts as per IS.694:1990 & confirming to GTP of GROUP.A. 3c x 4.0Sq.mm .PWD Ele SR 2022.23 P . 4 / I . 2.6.3. Each 167.0 167.0 70.0 False None None False None False 11690.0 0 2923971 96404 None 094 Supplying of 1.1 KV LT UG cable having aluminium conductor PVC insulated extruded inner sheathed , galvanised , steel strip . No. of strips indicated in GTP & extruded PVC outer sheathed armouredcable cable with specified .P No. 40, I. No. 6.4.4. Each 150.0 150.0 50.0 False None None False None False 7500.0 0 2923972 96404 None 095 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and wiring complete as required. P No. 27, I.No. 5.17.4. Group A , 6 to 32 amps Double pole Each 1103.0 1103.0 16.0 False None None False None False 17648.0 0 2923973 96404 None 096 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. .P No.05, I.No. 3.6.2. 6Amps Two way switch Each 152.0 152.0 20.0 False None None False None False 3040.0 0 2923974 96404 None 097 Supplying and fixing of modular switch/socket/stepped electronic fan regulator/ dimmer/ telephone socket etc on existing modular switch plate Is 3854 and IS 1293 .P No.05, I.No. 3.6.10. 32 Amps DP Each 375.0 375.0 16.0 False None None False None False 6000.0 0 2923975 96404 None 098 Supplying and fixing of modular switch/socket/stepped electronic fan regulator/ dimmer/ telephone socket etc on existing modular switch plate Is 3854 and IS 1293 .P No.05, I.No. 3.6.11. 16 Amps socket Each 249.0 249.0 20.0 False None None False None False 4980.0 0 2923976 96404 None 099 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 To 3 Moduler .P No.5, I.No. 3.5.1 . Each 152.0 152.0 8.0 False None None False None False 1216.0 0 2923977 96404 None 100 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 4 Moduler .P No.5, I.No. 3.5.2 . Each 175.0 175.0 14.0 False None None False None False 2450.0 0 2923978 96404 None 101 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 6 Moduler .P No.5, I.No. 3.5.3 . Each 244.0 244.0 18.0 False None None False None False 4392.0 0 2923979 96404 None 102 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Moduler .P No.5, I.No. 3.5.4 . Each 302.0 302.0 8.0 False None None False None False 2416.0 0 2923980 96404 None 103 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 10.12Moduler .P No.5, I.No. 3.5.6 . Each 363.0 363.0 4.0 False None None False None False 1452.0 0 2923981 96404 None 104 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB.s single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. 12 way SP & N P No.13, I.No. 5.18.4. Each 1591.0 1591.0 4.0 False None None False None False 6364.0 0 2923982 96404 None 105 Supplying and fixing regular MCCB distribution Panel confirming to IS/IEC 61439 . 3 and IK09 tested as per IS/IEC 62262 with minimum IP43 protection provided with Polyurethane .PUR. gasket, with suitable earthing system, on wall/wood board/flush mounting using required cl A , bolts, nuts, etc., with provision for fixing of suitable type capacity MCCB.s as an incomer for 3 phase Double door with necessary bus bar completely wired to use on 440V 3phase 4 wire powder coated painting etc., complete with a provision for fixing of single/three phase suitable capacity MCB.s as outgoings confirming to IS/IEC 60898 . 2. .P No. 13, I.No. 5.16.1. 4 Way Each 9169.0 9169.0 1.0 False None None False None False 9169.0 0 2923983 96404 None 106 Supplying , fixing, and wiring earth electrode for grounding condits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90 mm thick GI pipe 2.5 mtr long boried in a pit. The pit should be filled with equal proportion of salt and charcoal 150mm alround the pipe to complete pepth. The connection from the pipe to the conduit etc. is to be established through GI wire of size as per ISI specification 7.3.3 of IS 732 using 12mm dia bolts, nuts, washers and checknuts etc. the pipe shall have 16 through holes of 12mm dia..P No.40, I.No.6.1. Each 2999.7 2999.7 5.0 False None None False None False 14998.5 0 2923984 96404 None 107 Soil investigation and structural design report Job 10000.0 10000.0 1.0 False None None False None False 10000.0 0 2923985 96404 None 108 Supplying and fixing of slim patty fitting, made out of CRCA Sheet metal body with locking type holder completely wired. Excluding Ballast & Fluorescent Tube. 1 x 4. Tube light fitting. KPWD Electrical SR 2022.23 I.No.11.13.2/P.No:38 Each 243.0 243.0 50.0 False None None False None False 12150.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1709639608000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1709639608000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1709639608000 1 None None ELIGIBILITY All terms and condition as per attached tender document None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years None None None None None None Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded None None None None None None List of Financial Resources with Certificates None None None None None None The Tenderer should have Satisfactorily completed as prime contractor in the last five financial years i.e from FY-2018-19 to FY-2022-23 in any of the Government/Public Sector Undertaking, at least one similar work such as Construction of RCC building work of value not less than Rs.50.00 Lakhs (usually not less than 50% estimated value of contract). The satisfactory completion certificate issued by competent authority shall be furnished not below the rank of Executive Engineer or Equivalent. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None The Tenderer should have executed following quantities in one contract in the last five financial years i.e from FY-2018-19 to FY-2022-23 in any of the Government/Public Sector Undertaking (80% of estimated quantity). The satisfactory completion certificate issued by competent authority shall be furnished not below the rank of Executive Engineer or Equivalent. Earthwork excavation-160 Cum. PCC 1:4:8/1:3:6- 72 Cum. RCC M20 & above- 129.34 Cum Plastering- 2344 Cum. Granite/Vitrified/Ceramic flooring- 256 Cum TMT steel reinforcement- 12.24 Tonne Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None The Tenderer shall be a Registered KPWD Civil contractor of Class-III and above Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None PWD Registration Certificate (Class I/II/III/IV) None None None None Each Tenderer should further demonstrate: availability by owning following equipment OR availability on lease/hire basis. Relevant documents such as Purchase bill, RC book for own equipment OR lease agreement/hire agreement for leased/hired equipment. Documents should be Notarized and uploaded. Concrete mixer - 01 No. Tipper - 01 No. JCB /Excavator - 01No. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Machinery ownership details None None None None The Tenderer shall possess valid GST registration number. GST registration Certificate shall be scanned and uploaded. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None GST Registration None None None None The Tenderer shall furnish Valid Labour License, ESI registration certificate, EPF registration certificate and PAN card. Documents shall be scanned and uploaded. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Relevant document None None None None The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- The statements showing the value of existing commitments and on-going works None None None None The Tenderer shall furnish self-declaration of not being ineligible for corrupt and fraudulent practices and that the submitted documents are genuine Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- self-declaration of not being ineligible for corrupt and fraudulent practices None None None None The Tenderer shall visit the proposed work site before applying tender to ascertain the type and quantum of work. Self-declaration on site visit done shall be furnished by the Tenderer Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Self declaration on site visit None None None None Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under Assessed available Tender Capacity (AxNx2.5-B) Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Available tender capacity None None None None To qualify for award of this Contract, each Tenderer in its name should have in the last five years i.e from FY-2018-19 to FY-2022-23, achieved in at least two financial years an average annual financial turnover of Rs.100.00 Lakhs (usually not less than the estimated cost under this contract). (Turnover certificate shall be certified by Chartered Accountant). In support of this, the balance sheets and profit loss statements certified by a Chartered Accountant in the last five years i.e from FY-2018-19 to FY-2022-23 shall be scanned and uploaded. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None As per balance sheet certified by the Chartered Accountant, cash on hand and cash at bank and Term Deposits in any Indian Nationalized banks/ Scheduled Banks during FY-2022-23 OR Liquidity assets and or availability of credit facilities of Rs.30.00 Lahks (not less than 30% of the estimated value of contract) issued by Indian Nationalized banks/ Scheduled Banks. Credit facility certificate issued by Indian Nationalized banks/ Scheduled Banks shall be addressed to Superintending Engineer (Ele) (Tech), MESCOM, Corporate Office, Mangalore shall be scanned and uploaded Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit None None None None The Tenderer shall furnish income tax returns certificate of the last five years i.e from FY-2018-19 to FY-2022-23. Documents shall be scanned and uploaded. Financial Status None createdTs version createdDate modifiedDate documentName None None None None ITR Filed Copy (Mentioning PAN)
tenderCriterionDocumentList
tenderWorkLocationList
tenderAddress	None
tenderRecallDTO	None