createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1709635526130 version 7 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 5000.00 emd 400000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 06-04-2024 17:30:00 tenderQueryClose 14-03-2024 15:00:00 technicalBidOpen 10-04-2024 11:00:00 publishedDate 06-03-2024 13:34:16 publishedByPost MESCOM_SE_TECH_MNG publishedByUser KPE11354 - H N RAMESHA bidValidityPeriod 180 noOfCalls 1 preBidMeetingDate 15-03-2024 15:00:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Prashanth splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber None mobileNumber 9448289415 tenderSupplierList None
tenderSchedule	createdTs 1709635526163 version 8 createdDate None modifiedDate None tenderNumber MESCOM/2023-24/BD/WORK_INDENT216 title Construction of city sub-division office, section office-1 and section office-2 complex at Puttur. description Construction of city sub-division office, section office-1 and section office-2 complex at Puttur. category WORKS categoryText Works ecv 22626887.93 deptName Mangalore Electricity Supply Company Limited status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 8079 locationName MESCOM Superintending Engineer Tech Corporate Office Managaluru provisionalAmount 26700000.0 groupOverheadTotal None fileNumber MESCOM/SEET/EEC-1
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1709635526000 0 None None Buildings Construction of city sub-division office, section office-1 and section office-2 complex at Puttur. 22626887.93 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2922304 96302 None 001 Levelling:-Earth work excavation for Foundation by mechanical means for all works & depth3 m to 6 m as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work Cum 131.04 131.04 1400.0 False None None False None False 183456.0 0 2922305 96302 None 002 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work- In all kinds of soils Depth upto 3m Cum 114.24 114.24 500.0 False None None False None False 57120.0 0 2922306 96302 None 003 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates Cum 6343.68 6343.68 50.0 False None None False None False 317184.0 0 2922307 96302 None 004 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1/3/6 (M10) Using 20 mm nominal size graded crushed coarse aggregates Cum 6963.04 6963.04 24.0 False None None False None False 167112.96 0 2922308 96302 None 005 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.-m25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (For footings and sump tanks) Cum 7664.03 7664.03 85.0 False None None False None False 651442.55 0 2922309 96302 None 006 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.m25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Plinth Beam ) Cum 10886.4 10886.4 25.0 False None None False None False 272160.0 0 2922310 96302 None 007 Providing and laying in position cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. m25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Ground Floor ) (column) Cum 13029.07 13029.07 9.4 False None None False None False 122473.258 0 2922311 96302 None 008 Lintel Cum 12262.66 12262.66 2.38 False None None False None False 29185.1308 0 2922312 96302 None 009 Roof Beam Cum 12262.66 12262.66 13.0 False None None False None False 159414.58 0 2922313 96302 None 010 Chejja Cum 11113.03 11113.03 0.6 False None None False None False 6667.818 0 2922314 96302 None 011 Staircase Cum 11496.24 11496.24 6.35 False None None False None False 73001.124 0 2922315 96302 None 012 Roof Slab Cum 11496.24 11496.24 44.0 False None None False None False 505834.56 0 2922316 96302 None 013 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.m25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Retaining wall) Cum 7983.36 7983.36 92.0 False None None False None False 734469.12 0 2922317 96302 None 014 first floor Column Cum 13159.36 13159.36 9.8 False None None False None False 128961.728 0 2922318 96302 None 015 First floor Lintel Cum 12385.28 12385.28 6.2 False None None False None False 76788.736 0 2922319 96302 None 016 first floor Roof Beam Cum 12385.28 12385.28 22.4 False None None False None False 277430.272 0 2922320 96302 None 017 first floor Slab Cum 11611.2 11611.2 59.0 False None None False None False 685060.8 0 2922321 96302 None 018 first floor Staircase Cum 11611.2 11611.2 6.27 False None None False None False 72802.224 0 2922322 96302 None 019 First floor Chejja Cum 11224.16 11224.16 1.4 False None None False None False 15713.824 0 2922323 96302 None 020 Second Floor Column Cum 13289.65 13289.65 9.8 False None None False None False 130238.57 0 2922324 96302 None 021 second floor Lintel Cum 12507.91 12507.91 6.8 False None None False None False 85053.788 0 2922325 96302 None 022 second floor Roof Beam Cum 12507.91 12507.91 23.0 False None None False None False 287681.93 0 2922326 96302 None 023 second floor Slab Cum 11726.16 11726.16 60.0 False None None False None False 703569.6 0 2922327 96302 None 024 second floor Staircase Cum 11726.16 11726.16 6.27 False None None False None False 73523.0232 0 2922328 96302 None 025 second floor Chejja Cum 11335.29 11335.29 1.6 False None None False None False 18136.464 0 2922329 96302 None 026 Terrace Floor column Cum 13419.94 13419.94 3.0 False None None False None False 40259.82 0 2922330 96302 None 027 Terrace FloorLintel Cum 12630.54 12630.54 2.6 False None None False None False 32839.404 0 2922331 96302 None 028 Terrace FloorRoof Beam Cum 12630.54 12630.54 3.72 False None None False None False 46985.6088 0 2922332 96302 None 029 Terrace Floor Slab Cum 11841.13 11841.13 4.6 False None None False None False 54469.198 0 2922333 96302 None 030 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.Buildings (Ground Floor) Tonne 100191.84 100191.84 23.95 False None None False None False 2399594.568 0 2922334 96302 None 031 First Floor Tonne 101193.76 101193.76 9.33 False None None False None False 944137.7808 0 2922335 96302 None 032 Second Floor Tonne 102195.68 102195.68 9.63 False None None False None False 984144.3984 0 2922336 96302 None 033 Terrace Floor Tonne 103197.6 103197.6 0.93 False None None False None False 95973.768 0 2922337 96302 None 034 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 297.92 297.92 340.0 False None None False None False 101292.8 0 2922338 96302 None 035 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work Cum 530.88 530.88 170.0 False None None False None False 90249.6 0 2922339 96302 None 036 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 7155.68 7155.68 25.0 False None None False None False 178892.0 0 2922340 96302 None 037 Providing & constructing Laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specifications. I.S. 3620/1979 having compressive strength not less than 3.5N/mm2 for saturated dry samples FOR SUPER STRUCTURE in C.M:1:6 (Ground Floor) Cum 7565.6 7565.6 80.0 False None None False None False 605248.0 0 2922341 96302 None 038 First Floor Cum 7641.26 7641.26 85.0 False None None False None False 649507.1 0 2922342 96302 None 039 Second Floor Cum 7716.91 7716.91 113.0 False None None False None False 872010.83 0 2922343 96302 None 040 Terrace Floor Cum 7792.57 7792.57 48.0 False None None False None False 374043.36 0 2922344 96302 None 041 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. (Ground Floor) Sqm 1378.72 1378.72 15.0 False None None False None False 20680.8 0 2922345 96302 None 042 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications (Ground Floor) Sqm 1236.48 1236.48 7.3 False None None False None False 9026.304 0 2922346 96302 None 043 first Floor Sqm 1248.84 1248.84 7.3 False None None False None False 9116.532 0 2922347 96302 None 044 Second Floor Sqm 1261.21 1261.21 7.3 False None None False None False 9206.833 0 2922348 96302 None 045 Terrace Floor Sqm 1273.57 1273.57 90.0 False None None False None False 114621.3 0 2922349 96302 None 046 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For Fixed Portion: Powder coated aluminium (minimum thickness of powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications.(First Floor) Kg 553.16 553.16 180.0 False None None False None False 99568.8 0 2922350 96302 None 047 second floor Kg 558.63 558.63 172.0 False None None False None False 96084.36 0 2922351 96302 None 048 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications.(First Floor) Kg 645.92 645.92 10.8 False None None False None False 6975.936 0 2922352 96302 None 049 Second Floor Kg 652.31 652.31 11.0 False None None False None False 7175.41 0 2922353 96302 None 050 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/ m²) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(First Floor) Sqm 1117.63 1117.63 42.0 False None None False None False 46940.46 0 2922354 96302 None 051 Second Floor Sqm 1128.69 1128.69 42.0 False None None False None False 47404.98 0 2922355 96302 None 052 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin- charge: Pre-laminated particle board with decorative lamination on both sides including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (First Floor) Sqm 1111.97 1111.97 42.0 False None None False None False 46702.74 0 2922356 96302 None 053 Second Floor Sqm 1122.98 1122.98 42.0 False None None False None False 47165.16 0 2922357 96302 None 054 Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. (Ground Floor) Cum 154642.88 154642.88 0.2 False None None False None False 30928.576 0 2922358 96302 None 055 First Floor Cum 156189.31 156189.31 0.15 False None None False None False 23428.3965 0 2922359 96302 None 056 Second Floor Cum 157735.74 157735.74 0.15 False None None False None False 23660.361 0 2922360 96302 None 057 Terrace Floor Cum 159282.17 159282.17 0.1 False None None False None False 15928.217 0 2922361 96302 None 058 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. - -do- 30 mm thick both side commercial (Ground Floor) Sqm 3365.6 3365.6 9.0 False None None False None False 30290.4 0 2922362 96302 None 059 First Floor Sqm 3399.26 3399.26 6.0 False None None False None False 20395.56 0 2922363 96302 None 060 Second Floor Sqm 3432.91 3432.91 6.0 False None None False None False 20597.46 0 2922364 96302 None 061 Terrace Floor Sqm 3466.57 3466.57 3.0 False None None False None False 10399.71 0 2922365 96302 None 062 Providing and fixing factory made pre fabricated non-monolithic Premium R.C.C. Door Frames factory manufactured in separate parts and assembled at bolts nuts system with mechanical table vibrating as per IS 6523-1983 with using m25 concrete as per IS 456 and reinforced with 1.70 kg of TMT steel reinforced with 3 No. of 6 mm dia Main TMT bars and 6 mm Dia TMT stirrups welded at 40 cm c/c in triangle shape per meter length of door frames, including cost of steel and fabrication charges having 4 No. of 304 Grade Stainless Steel hinges plate attachment made of 165 mm x 25 mm x 2.5 mm Stainless Steel Flat welded with required iron rods and flats with drilling for fixing flat CSK Head Machine screws made out of 304 grade stainless steel screws and MS square nuts of size 8 x 8 square and length 10 mm and making necessary provision in concrete for fixing aldrops, tower bolts and hold fasts etc., complete including two coats of oil based enamel primer providing without cill for shutter thickness upto 32 mm, 21 days tank immersed curing including cost of labour, materials, usage charge of machinery complete excluding the cost of door fixtures as per the direction of Engineer. Cross section of 60 mm x 100 mm (Ground Floor) Rmtr 963.2 963.2 11.6 False None None False None False 11173.12 0 2922366 96302 None 063 First Floor Rmtr 972.83 972.83 11.6 False None None False None False 11284.828 0 2922367 96302 None 064 Second Floor Rmtr 982.46 982.46 17.5 False None None False None False 17193.05 0 2922368 96302 None 065 Providing and fixing to existing door frames 30mm thick glass fibre reinforced plastic (FRP) panelled door shutter of required colour and approved brand and manufacture made with fire retardent frade unsaturated polyster resin, moulded to 3mm thick FRP laminate for forming hollow rails and styles with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminate for panels confirming to IS:14856, including fixing to frames. (Ground Floor) Sqm 3588.48 3588.48 3.2 False None None False None False 11483.136 0 2922369 96302 None 066 First Floor Sqm 3624.36 3624.36 3.2 False None None False None False 11597.952 0 2922370 96302 None 067 Second Floor Sqm 3660.25 3660.25 4.73 False None None False None False 17312.9825 0 2922371 96302 None 068 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (Ground Floor) Kg 632.8 632.8 140.0 False None None False None False 88592.0 0 2922372 96302 None 069 First Floor Kg 639.13 639.13 70.0 False None None False None False 44739.1 0 2922373 96302 None 070 Second Floor Kg 645.46 645.46 70.0 False None None False None False 45182.2 0 2922374 96302 None 071 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mm height with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P s shall not be made) (Ground Floor) Sqm 7542.08 7542.08 8.2 False None None False None False 61845.056 0 2922375 96302 None 072 First Floor Sqm 7617.5 7617.5 32.5 False None None False None False 247568.75 0 2922376 96302 None 073 Second Floor Sqm 7692.92 7692.92 35.2 False None None False None False 270790.784 0 2922377 96302 None 074 Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 50mm width x 42mm height with nforcement of 1mm thickness and Sash with overall size of 31mm X 57mm with Gi einforcement of 1mm for the frame and 1.5 mm for the sash. Coextruded Glazing bead for fixing of glass shall be of size 21.5mm x 9.5 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 1.8+-0.2 mm. Maximum possible size 1519mm x 1519mm. (The cost is inclusive of all fixtures and separate charges for minor T&Ps shall not be made) ( first floor) Sqm 6097.17 6097.17 6.8 False None None False None False 41460.756 0 2922378 96302 None 075 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P s shall not be made)-GF,FF,TF (Ground Floor) Sqm 6405.28 6405.28 1.0 False None None False None False 6405.28 0 2922379 96302 None 076 First Floor Sqm 6469.33 6469.33 1.0 False None None False None False 6469.33 0 2922380 96302 None 077 Second Floor Sqm 6533.39 6533.39 1.4 False None None False None False 9146.746 0 2922381 96302 None 078 Providing and fixing M.S. grills of required pattern in frames of win dows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. (Ground Floor) Kg 188.16 188.16 190.0 False None None False None False 35750.4 0 2922382 96302 None 079 First Floor Kg 190.04 190.04 700.0 False None None False None False 133028.0 0 2922383 96302 None 080 Second Floor Kg 191.92 191.92 760.0 False None None False None False 145859.2 0 2922384 96302 None 081 Terrace floor Kg 193.8 193.8 115.0 False None None False None False 22287.0 0 2922385 96302 None 082 Providing and fixing Steel work welded in built up sections framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer Using structural steel etc . as required in stringers, treads, landinf etc of stair cases, including use of chequered plate wherever required, all complete including cost of materials, labour, usage charges of machinerycomplete as per specifications and as per directions of the Engineer-in Charge. Kg 126.56 126.56 620.0 False None None False None False 78467.2 0 2922386 96302 None 083 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of theEngineer-in-Charge. Kg 2948.96 2948.96 242.0 False None None False None False 713648.32 0 2922387 96302 None 084 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications. (Second floor) Cum 2326.81 2326.81 4.3 False None None False None False 10005.283 0 2922388 96302 None 085 Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re-inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis) (Second floor) Cum 702.58 702.58 1.5 False None None False None False 1053.87 0 2922389 96302 None 086 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. (Terrace floor) Sqm 942.49 942.49 352.0 False None None False None False 331756.48 0 2922390 96302 None 087 Providing and laying water proofing treatment to the Water tanks & Liq uid Retaining structures with two component acrylic polymer modified cementitious waterproofing membrane with minimum elongation of 50% applied @ 1.5 kg/m2 for internal side waterproofing in two layers with waiting period of 4-6 hrs per layer and food grade epoxy coating in two coats certified by CFTRI Mysuru, including surface preparation completely as per specification Sqm 567.84 567.84 63.0 False None None False None False 35773.92 0 2922391 96302 None 088 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Ceiling Plastering. (Ground Floor) Sqm 269.92 269.92 200.0 False None None False None False 53984.0 0 2922392 96302 None 089 First Floor Sqm 272.62 272.62 340.0 False None None False None False 92690.8 0 2922393 96302 None 090 Second Floor Sqm 275.32 275.32 340.0 False None None False None False 93608.8 0 2922394 96302 None 091 Terrace floor Sqm 278.02 278.02 86.0 False None None False None False 23909.72 0 2922395 96302 None 092 Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge (inside walls) (Ground Floor) Sqm 372.96 372.96 360.0 False None None False None False 134265.6 0 2922396 96302 None 093 First Floor Sqm 376.69 376.69 625.0 False None None False None False 235431.25 0 2922397 96302 None 094 Second Floor Sqm 380.42 380.42 700.0 False None None False None False 266294.0 0 2922398 96302 None 095 Terrace floor Sqm 384.15 384.15 92.0 False None None False None False 35341.8 0 2922399 96302 None 096 Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge (out side wall) (Ground Floor) Sqm 372.96 372.96 375.0 False None None False None False 139860.0 0 2922400 96302 None 097 First Floor Sqm 376.69 376.69 315.0 False None None False None False 118657.35 0 2922401 96302 None 098 Second Floor Sqm 380.42 380.42 325.0 False None None False None False 123636.5 0 2922402 96302 None 099 Terrace floor Sqm 384.15 384.15 265.0 False None None False None False 101799.75 0 2922403 96302 None 100 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. (Ground Floor) Sqm 112.0 112.0 340.0 False None None False None False 38080.0 0 2922404 96302 None 101 First Floor Sqm 113.12 113.12 610.0 False None None False None False 69003.2 0 2922405 96302 None 102 Second Floor Sqm 114.24 114.24 680.0 False None None False None False 77683.2 0 2922406 96302 None 103 Terrace floor Sqm 115.36 115.36 95.0 False None None False None False 10959.2 0 2922407 96302 None 104 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m2over and including one coat of Special primer applied @ 0.75 ltr /10 m2 with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge (Internal Painting). (Ground Floor) Sqm 176.96 176.96 340.0 False None None False None False 60166.4 0 2922408 96302 None 105 First Floor Sqm 178.73 178.73 610.0 False None None False None False 109025.3 0 2922409 96302 None 106 Second Floor Sqm 180.5 180.5 680.0 False None None False None False 122740.0 0 2922410 96302 None 107 Terrace floor Sqm 182.27 182.27 95.0 False None None False None False 17315.65 0 2922411 96302 None 108 Outside Painting (Ground Floor) Sqm 176.96 176.96 375.0 False None None False None False 66360.0 0 2922412 96302 None 109 Outside Painting First Floor Sqm 178.73 178.73 315.0 False None None False None False 56299.95 0 2922413 96302 None 110 Outside Painting Second Floor Sqm 180.5 180.5 325.0 False None None False None False 58662.5 0 2922414 96302 None 111 Outside Painting Terrace floor Sqm 182.27 182.27 265.0 False None None False None False 48301.55 0 2922415 96302 None 112 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge (including primer) Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (Ground Floor) Sqm 243.04 243.04 130.0 False None None False None False 31595.2 0 2922416 96302 None 113 First Floor Sqm 245.47 245.47 34.0 False None None False None False 8345.98 0 2922417 96302 None 114 Second Floor Sqm 247.9 247.9 40.0 False None None False None False 9916.0 0 2922418 96302 None 115 Terrace floor Sqm 250.33 250.33 5.5 False None None False None False 1376.815 0 2922419 96302 None 116 Providing and fixing magnetic door stopper with necessary screws, etc. complete. (Ground Floor) Nos 300.0 300.0 4.0 False None None False None False 1200.0 0 2922420 96302 None 117 First Floor Nos 300.0 300.0 5.0 False None None False None False 1500.0 0 2922421 96302 None 118 Second Floor Nos 300.0 300.0 6.0 False None None False None False 1800.0 0 2922422 96302 None 119 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete- Size of Tile 600x600 mm (Ground Floor) Sqm 1282.4 1282.4 42.0 False None None False None False 53860.8 0 2922423 96302 None 120 First Floor Sqm 1295.22 1295.22 280.0 False None None False None False 362661.6 0 2922424 96302 None 121 Second Floor Sqm 1308.05 1308.05 280.0 False None None False None False 366254.0 0 2922425 96302 None 122 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. (Ground Floor) Sqm 3194.24 3194.24 72.0 False None None False None False 229985.28 0 2922426 96302 None 123 First Floor Sqm 3226.18 3226.18 40.0 False None None False None False 129047.2 0 2922427 96302 None 124 Second Floor Sqm 3258.12 3258.12 40.0 False None None False None False 130324.8 0 2922428 96302 None 125 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. (Ground Floor) Sqm 995.68 995.68 7.5 False None None False None False 7467.6 0 2922429 96302 None 126 First Floor Sqm 1005.64 1005.64 7.5 False None None False None False 7542.3 0 2922430 96302 None 127 Second Floor Sqm 1015.59 1015.59 7.5 False None None False None False 7616.925 0 2922431 96302 None 128 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. (Ground Floor) Sqm 1622.88 1622.88 25.0 False None None False None False 40572.0 0 2922432 96302 None 129 First Floor Sqm 1639.11 1639.11 23.0 False None None False None False 37699.53 0 2922433 96302 None 130 Second Floor Sqm 1655.34 1655.34 23.0 False None None False None False 38072.82 0 2922434 96302 None 131 Providing and laying flooring and steps machine cut granite slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with ce ment mortar 1:3 over existing cement concrete bed , including cost of materials, mortar labour, curing complete as per specifications. (Ground Floor) Sqm 4792.48 4792.48 45.0 False None None False None False 215661.6 0 2922435 96302 None 132 First Floor Sqm 4840.4 4840.4 30.0 False None None False None False 145212.0 0 2922436 96302 None 133 Second Floor Sqm 4888.33 4888.33 30.0 False None None False None False 146649.9 0 2922437 96302 None 134 Providing SBC of the soil by conducting test through engineering college , block levelling of the site, surveying of the site and submitting structural design and drawings of the building from the structural engineer. (quotation rate) Each 182000.0 182000.0 1.0 False None None False None False 182000.0 0 2922438 96302 None 135 providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. Sqm 896.0 896.0 500.0 False None None False None False 448000.0 0 2922439 96302 None 136 Wet Mix Macadam (Plant mix method) Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. Cum 2866.08 2866.08 25.0 False None None False None False 71652.0 0 2922440 96302 None 137 Glass Door cum fixed glass partitions using Jindal anodised section of 4 x 2 on all sides of glass and door completely along with 4 numbers of SS handle of 450mm long. Sqm 6500.0 6500.0 6.0 False None None False None False 39000.0 0 2922441 96302 None 138 Fixing charges for door fixtures and other fitting of pipe lines (Market Rate) Nos 32000.0 32000.0 1.0 False None None False None False 32000.0 0 2922442 96302 None 139 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. Each 5418.56 5418.56 4.0 False None None False None False 21674.24 0 2922443 96302 None 140 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests Each 5470.08 5470.08 3.0 False None None False None False 16410.24 0 2922444 96302 None 141 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. Each 3451.84 3451.84 4.0 False None None False None False 13807.36 0 2922445 96302 None 142 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern. Set 7598.08 7598.08 3.0 False None None False None False 22794.24 0 2922446 96302 None 143 Installing, testing and commissioning of approved make 15 mm CP health faucet with CP flexible tube 1.0m long, CP crutch, nozzle etc.,complete. Each 1800.0 1800.0 4.0 False None None False None False 7200.0 0 2922447 96302 None 144 Providing and fixing brass stop cock of approved quality : 20 mm nominal bore Jal or equivalent Each 341.6 341.6 12.0 False None None False None False 4099.2 0 2922448 96302 None 145 Providing and fixing brass bib cock of approved quality : 20 mm nominal bore Jal or equivalent Each 341.6 341.6 12.0 False None None False None False 4099.2 0 2922449 96302 None 146 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 32 mm nominal bore Each 669.76 669.76 5.0 False None None False None False 3348.8 0 2922450 96302 None 147 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore. Each 614.88 614.88 3.0 False None None False None False 1844.64 0 2922451 96302 None 148 Providing and placing on terrece polythene water storage tank , IS : 12701 marked with cover and suitable locking arragements and making necessary holes for inlet, outlet and over flow pipes but without fitting and base support for tank.2000 litres Ltr 10.08 10.08 2000.0 False None None False None False 20160.0 0 2922452 96302 None 149 Providing and fixing 100 mm sand cast Iron grating for gully trap/ Nahani trap Each 52.64 52.64 5.0 False None None False None False 263.2 0 2922453 96302 None 150 Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS 13593 type A, including jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expansion, (i) single socketed pipes -100mm dia100mm Mtr 325.92 325.92 150.0 False None None False None False 48888.0 0 2922454 96302 None 151 Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS 13593 type A, including jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expansion, (i) single socketed pipes -100mm dia100mm 75mm Mtr 220.64 220.64 100.0 False None None False None False 22064.0 0 2922455 96302 None 152 Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1/2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover. Nos 4744.32 4744.32 4.0 False None None False None False 18977.28 0 2922456 96302 None 153 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover. Nos 6108.48 6108.48 4.0 False None None False None False 24433.92 0 2922457 96302 None 154 Providing and fixing chlorinated Poly Venyl Chloride(CPVC) pipes confirming to IS 15778 having thermal stability for hot and cold water supply incluidng all CPVC plain and brass threaded fittings i.e. fixing the pipes with clamps at 1.00m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer incharge. Concealed work including cutting chases and making good the wall etc., 1st Addendum order 25mm Mtr 534.24 534.24 80.0 False None None False None False 42739.2 0 2922458 96302 None 155 Providing and fixing chlorinated Poly Venyl Chloride (CPVC) pipes confirming to IS 15778 having thermal stability for hot and cold water supply incluidng all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00mtr spacing.This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer incharge. (Exposed on wall) 20mm nominal dia Mtr 271.04 271.04 90.0 False None None False None False 24393.6 0 2922459 96302 None 156 Providing and fixing chlorinated Poly Venyl Chloride(CPVC) pipes, having thermal stability for hot and cold water supply incluidng all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of engineer incharge. -External work 40mm dia Mtr 534.24 534.24 75.0 False None None False None False 40068.0 0 2922460 96302 None 157 Providing and fixing chlorinated Poly Venyl Chloride(CPVC) pipes, having thermal stability for hot and cold water supply incluidng all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of engineer incharge. -External work 32mm dia Mtr 416.64 416.64 80.0 False None None False None False 33331.2 0 2922461 96302 None 158 Providing and fixing gun metal non- return valve of approved quality (screwed end) : 32 mm nominal bore Vertical Nos 1036.0 1036.0 4.0 False None None False None False 4144.0 0 2922462 96302 None 159 Providing, supplying to work site,Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for open well motor including the suction pipe,non return valve flexible Green pipe pipe etc cpomplete [each work]confirming to IS 8034-2000 specifications,with testing of as per instructions of engineer incharge of work and latest amendments.-1.50 HP/1.1KW - 20 STG Nos 20404.16 20404.16 1.0 False None None False None False 20404.16 0 2922463 96302 None 160 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. Nos 555.52 555.52 5.0 False None None False None False 2777.6 0 2922464 96302 None 161 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm Nos 1140.16 1140.16 4.0 False None None False None False 4560.64 0 2922465 96302 None 162 Supplying and wiring adopting loop system in existing PVC Conduit/casing capping casing capping using 2x1.5Sqmm (Phase & Neutral)& 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulatedcopper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box,the other end of the wires shall be terminated with sufficient looselength in a wood/PVC round block. complete for each outlet. Short point upto 3Mtr from tapping point to out let via switch box Point 269.0 269.0 20.0 False None None False None False 5380.0 0 2922466 96302 None 163 Medium point above 3Mtr upto 6mtr from tapping point to outlet via switch box Point 379.0 379.0 30.0 False None None False None False 11370.0 0 2922467 96302 None 164 Long point above 6 mtr upto 10mtr from tapping point to out let via switch box Point 555.0 555.0 15.0 False None None False None False 8325.0 0 2922468 96302 None 165 Two outlet in a row, above 3mtr upto 6mtr from tapping point to out let via switch box. Point 677.0 677.0 10.0 False None None False None False 6770.0 0 2922469 96302 None 166 Three outlet in a row, above 6mtr upto 10mtr from tapping point to out let via switch box Point 989.0 989.0 1.0 False None None False None False 989.0 0 2922470 96302 None 167 Concelled Conduit System : Supplying heavy gauge PVC conduit pipe mm dia..mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 19/20mm dia 2mm thick Mtr 66.0 66.0 250.0 False None None False None False 16500.0 0 2922471 96302 None 168 Concelled Conduit System : Supplying heavy gauge PVC conduit pipe mm dia..mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 19/20mm dia 2mm thick 25mm dia 2mm thick Mtr 78.0 78.0 300.0 False None None False None False 23400.0 0 2922472 96302 None 169 Concelled Conduit System : Supplying heavy gauge PVC conduit pipe mm dia..mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 19/20mm dia 2mm thick 32mm dia 2mm thick Mtr 103.0 103.0 50.0 False None None False None False 5150.0 0 2922473 96302 None 170 Groove cutting : Supplying...dia 2mm/2.5mm thick heavy gauge PVC Conduit pope with bends, metal junction boxes adhesive paste etc., and bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever neccessary. 19/20mm dia 2mm thick Mtr 68.0 68.0 100.0 False None None False None False 6800.0 0 2922474 96302 None 171 Groove cutting : Supplying...dia 2mm/2.5mm thick heavy gauge PVC Conduit pope with bends, metal junction boxes adhesive paste etc., and bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever neccessary. 25mm dia 2m thick Mtr 79.0 79.0 100.0 False None None False None False 7900.0 0 2922475 96302 None 172 Groove cutting : Supplying...dia 2mm/2.5mm thick heavy gauge PVC Conduit pope with bends, metal junction boxes adhesive paste etc., and bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever neccessary.32mm dia 2.5mm thick Mtr 99.0 99.0 25.0 False None None False None False 2475.0 0 2922476 96302 None 173 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:201. 1.5 mm2 Mtr 26.0 26.0 700.0 False None None False None False 18200.0 0 2922477 96302 None 174 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:201. 2.5 mm2 Mtr 42.0 42.0 1000.0 False None None False None False 42000.0 0 2922478 96302 None 175 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:201.4 mm2 Mtr 63.0 63.0 250.0 False None None False None False 15750.0 0 2922479 96302 None 176 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:201.6 mm2 Mtr 92.0 92.0 100.0 False None None False None False 9200.0 0 2922480 96302 None 177 Supplying and fixing PVC/metal conduit Deep junction box-19/20mm deep junction box Each 49.0 49.0 20.0 False None None False None False 980.0 0 2922481 96302 None 178 Supplying and fixing PVC/metal conduit Deep junction box-25mm deep junction box Each 56.0 56.0 20.0 False None None False None False 1120.0 0 2922482 96302 None 179 Supplying and fixing of Metal Fan Box with Round Hook. Each 117.0 117.0 20.0 False None None False None False 2340.0 0 2922483 96302 None 180 Extra length of GI pipe of class B 19mm dia for down rod. Mtr 197.0 197.0 13.2 False None None False None False 2600.4 0 2922484 96302 None 181 SWITCHES, SOCKETS & ACCESSORIES. Supplying and flush mounting powder coated / galvanised metal box suitable for mountting modular switch plates. The box should be firmly mounted after due groove cutting in Brick/Stone/C.C. wall Each 159.0 159.0 55.0 False None None False None False 8745.0 0 2922485 96302 None 182 SWITCHES, SOCKETS & ACCESSORIES. Supplying and flush mounting powder coated / galvanised metal box suitable for mountting modular switch plates. The box should be firmly mounted after due groove cutting in Brick/Stone/C.C. 5 Way Each 177.0 177.0 10.0 False None None False None False 1770.0 0 2922486 96302 None 183 SWITCHES, SOCKETS & ACCESSORIES. Supplying and flush mounting powder coated / galvanised metal box suitable for mountting modular switch plates. The box should be firmly mounted after due groove cutting in Brick/Stone/C.C. wall6 Way Each 220.0 220.0 30.0 False None None False None False 6600.0 0 2922487 96302 None 184 SWITCHES, SOCKETS & ACCESSORIES. Supplying and flush mounting powder coated / galvanised metal box suitable for mountting modular switch plates. The box should be firmly mounted after due groove cutting in Brick/Stone/C.C. wall8 Way Each 261.0 261.0 10.0 False None None False None False 2610.0 0 2922488 96302 None 185 SWITCHES, SOCKETS & ACCESSORIES. Supplying and flush mounting powder coated / galvanised metal box suitable for mountting modular switch plates. The box should be firmly mounted after due groove cutting in Brick/Stone/C.C. wall10-12 Way Each 319.0 319.0 5.0 False None None False None False 1595.0 0 2922489 96302 None 186 SWITCHES, SOCKETS & ACCESSORIES. Supplying and flush mounting powder coated / galvanised metal box suitable for mountting modular switch plates. The box should be firmly mounted after due groove cutting in Brick/Stone/C.C. wall16 Way Each 363.0 363.0 1.0 False None None False None False 363.0 0 2922490 96302 None 187 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.3 Module Each 161.0 161.0 55.0 False None None False None False 8855.0 0 2922491 96302 None 188 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.4 Module Each 175.0 175.0 10.0 False None None False None False 1750.0 0 2922492 96302 None 189 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.6 Module Each 234.0 234.0 30.0 False None None False None False 7020.0 0 2922493 96302 None 190 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.8 Module Each 284.0 284.0 10.0 False None None False None False 2840.0 0 2922494 96302 None 191 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.10 Module Each 344.0 344.0 5.0 False None None False None False 1720.0 0 2922495 96302 None 192 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.16Module Each 397.0 397.0 1.0 False None None False None False 397.0 0 2922496 96302 None 193 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A one way Each 102.0 102.0 130.0 False None None False None False 13260.0 0 2922497 96302 None 194 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A two way switch Each 166.0 166.0 6.0 False None None False None False 996.0 0 2922498 96302 None 195 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A two way switch 6A three way socket. Each 171.0 171.0 40.0 False None None False None False 6840.0 0 2922499 96302 None 196 Stepped Fan Regulator two module Each 357.0 357.0 20.0 False None None False None False 7140.0 0 2922500 96302 None 197 one way switch. 16A Each 180.0 180.0 10.0 False None None False None False 1800.0 0 2922501 96302 None 198 Bell Push. 6A Each 177.0 177.0 3.0 False None None False None False 531.0 0 2922502 96302 None 199 switch 32A DP Each 326.0 326.0 3.0 False None None False None False 978.0 0 2922503 96302 None 200 Universal Socket 6/16A Each 236.0 236.0 10.0 False None None False None False 2360.0 0 2922504 96302 None 201 TV/Telephone Socket. Each 156.0 156.0 15.0 False None None False None False 2340.0 0 2922505 96302 None 202 RJ 45/I.O Out let Cat 6 Each 337.0 337.0 25.0 False None None False None False 8425.0 0 2922506 96302 None 203 CONTROL SWITCH GEARS & ACCESSORIES. Supplying and fixing miniature circuit breaker on existing MCB distribution board using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring confirming to IEC 60898. 6-32 Amps SP Each 415.0 415.0 20.0 False None None False None False 8300.0 0 2922507 96302 None 204 DP 40 A Each 1060.0 1060.0 6.0 False None None False None False 6360.0 0 2922508 96302 None 205 Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board.16-25A,2 pole Each 4277.0 4277.0 3.0 False None None False None False 12831.0 0 2922509 96302 None 206 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB s single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. 4 Way SP & N Ups Input Each 1241.0 1241.0 2.0 False None None False None False 2482.0 0 2922510 96302 None 207 SP &N LDB/PDB/UDB 12 way Each 1863.0 1863.0 3.0 False None None False None False 5589.0 0 2922511 96302 None 208 NETWORKING & TELECOMMUNICATION. /CC TV Supplying and drawing PVC flexible TWO pair telephone unarmoured tinned copper cable. -2 Pair. Mtr 21.0 21.0 200.0 False None None False None False 4200.0 0 2922512 96302 None 209 Supplying and drawing UTP-CAT 6E LAN Cable Mtr 38.0 38.0 350.0 False None None False None False 13300.0 0 2922513 96302 None 210 Supply and Fixing of MDF Krone junction boxes with KRONE module/telephone cable termination 10 pair Mtr 345.0 345.0 1.0 False None None False None False 345.0 0 2922514 96302 None 211 Supplying heavy gauge PVC conduit pipe . dia .mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws 19/20mm dia 2mm thick Mtr 69.0 69.0 120.0 False None None False None False 8280.0 0 2922515 96302 None 212 dia 2mm thick 25mm dia Mtr 81.0 81.0 150.0 False None None False None False 12150.0 0 2922516 96302 None 213 Supplying & Fixing of switch mounting rack with power manager & Cable manager -9U with 450mm depth Each 8476.0 8476.0 1.0 False None None False None False 8476.0 0 2922517 96302 None 214 patch Panel 24 port 10/100 Each 4100.0 4100.0 1.0 False None None False None False 4100.0 0 2922518 96302 None 215 Supplying & Fixing of 2 m Cat 6 Patch Cable Each 257.0 257.0 15.0 False None None False None False 3855.0 0 2922519 96302 None 216 Supplying & Fixing of 1 m Cat 6 Patch Cable Each 224.0 224.0 15.0 False None None False None False 3360.0 0 2922520 96302 None 217 Fixing all types and all capacities of flouroscent / false ceiling / spot light / CFL / LED fittings on the wall / ceiling / rafters / girders using 23/0.0076 twin twisted PVC insulated wires, required nos. of round blocks & clamps. On wall / ceiling / rafter / girders Each 122.0 122.0 50.0 False None None False None False 6100.0 0 2922521 96302 None 218 Fixing a ceiling /wall mounting fan of all capacities and all types,with necessary clamps and S hook made out of 15mm dia MS rod,with 5 A. ceiling rose of approved quality with necessary length of 23/0.0076 inch PVC insulated twin twisted wire of approved quality mounted on a suitable size wooden board and wired. Each 171.0 171.0 20.0 False None None False None False 3420.0 0 2922522 96302 None 219 Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire. Each 492.0 492.0 4.0 False None None False None False 1968.0 0 2922523 96302 None 220 Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. Each 162.0 162.0 3.0 False None None False None False 486.0 0 2922524 96302 None 221 EARTH STATION & EARTH TAPE. Supplying & Fixing Chemical earthling for grounding. Conduits, IC cut-outs & other equipments backfill compound which is non corrosive, thermally conductive, potential to permissible limits, superior Fault conduction capacity, non toxic, weather resistance & capable of achieving ohmic value less than one ohm. Using 10ft. SS rod with backfill compound Kit 6230.0 6230.0 7.0 False None None False None False 43610.0 0 2922525 96302 None 222 GI/Copper strips for grounding connections, using necessary fixing materials as required. 25 x6 mm GI strip Mtr 128.0 128.0 20.0 False None None False None False 2560.0 0 2922526 96302 None 223 Supplying & Fixing of 230 V 20/40 W Fluorescent Lamp holder No 33.0 33.0 3.0 False None None False None False 99.0 0 2922527 96302 None 224 Supplying and fixing one of 230 V Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote. No 246.0 246.0 3.0 False None None False None False 738.0 0 2922528 96302 None 225 Bakelite Ceiling Rose 6A No 78.0 78.0 50.0 False None None False None False 3900.0 0 2922529 96302 None 226 Supplying 1.1KV LT UG cable having aluminium conductor PVC insulated, extruded inner sheathed, galvanised, steel strips : 2.5 to 25 Sqmm (Single/3.5/4 Core) Km 1187.0 1187.0 0.2 False None None False None False 237.4 0 2922530 96302 None 227 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 2.5 to 25 Sqmm Km 20886.0 20886.0 0.2 False None None False None False 4177.2 0 2922531 96302 None 228 Supply and fixing of Brass Cable Gland 45 mm No 197.0 197.0 2.0 False None None False None False 394.0 0 2922532 96302 None 229 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuitwith adjustable thermal magnetic release, Micro processor release shall have Earth Fault as per IS/IEC 60947-2 . (Icu100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism THREE Pole100Amps ,25KA, FP for Panel EB Incomer Each 6086.0 6086.0 1.0 False None None False None False 6086.0 0 2922533 96302 None 230 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 . 6-32 Amps DP -FOR Outgioing Each 739.0 739.0 8.0 False None None False None False 5912.0 0 2922534 96302 None 231 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 50-63 A TPN FOR OUT GOING Each 3088.0 3088.0 2.0 False None None False None False 6176.0 0 2922535 96302 None 232 Supplying 100. Amps rated 3 phase with neutral bus bar using requirement capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/ DMC insulator which are mounted on powder coated 40*6mm M.S flat frame work in exisisting panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. : 100Amps 4x30x6mm Alluminium Strips - 100Amps , 4x50x10xmm AL strips Mtr 2465.0 2465.0 5.0 False None None False None False 12325.0 0 2922536 96302 None 233 Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. - 50x50x6mm Mtr 395.0 395.0 5.0 False None None False None False 1975.0 0 2922537 96302 None 234 Fabricating supplying and mounting MS box made out .SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete.14 SWG Sq CM 0.5 0.5 30000.0 False None None False None False 15000.0 0 2922538 96302 None 235 Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 A three phase 4 wire whole current class-1 Accuracy Energy Meter Each 5705.0 5705.0 1.0 False None None False None False 5705.0 0 2922539 96302 None 236 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for r 230/440VAC. 50 Hz 12/24V D.C. Each 515.0 515.0 4.0 False None None False None False 2060.0 0 2922540 96302 None 237 Supply and fixing of fully Enclosed Automatic Transfer Switch (ATS) Pre-wired with Flexible Settings and seamless transfer between two power sources. The enclosure made of MS Power coated of necessary size. The switch comprising of EB/DG-Priority Source Selection,. Adjustable Time Delay (0.1sec to 3 hours),.Double-Break Contact System offering High Short-time Withstand (Icw),.with necessary Terminal Shrouds, Phase Barriers & Source Separator,. Protections for UV/OV, Phase Sequence, Single Phasing, Frequency variation. There should be sufficient space for cable termination. Three Phase 415 V -125A Each 45000.0 45000.0 1.0 False None None False None False 45000.0 0 2922541 96302 None 238 Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage current, programmable delay/auto/ manual reset facility suitable to mount on DIN rail/ flush mounting on panel board Each 9255.0 9255.0 1.0 False None None False None False 9255.0 0 2922542 96302 None 239 Supplying, fixing and wiring 3 Phase Digital Ammeter /Voltmeter. Each 1425.0 1425.0 2.0 False None None False None False 2850.0 0 2922543 96302 None 240 Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound Each 562.0 562.0 3.0 False None None False None False 1686.0 0 2922544 96302 None 241 Supply and Installation of Surge Protection Device (SPD) with 63A 4P Isolator.-Market rate ( OBO /DEN Make ) Each 17500.0 17500.0 1.0 False None None False None False 17500.0 0 2922545 96302 None 242 Supplying of feet -PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x4 -20/22watt No 690.0 690.0 35.0 False None None False None False 24150.0 0 2922546 96302 None 243 Supplying of .feet -PVC Batten with integrated LED tube . W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x2 - 9/10watt No 551.0 551.0 9.0 False None None False None False 4959.0 0 2922547 96302 None 244 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system. 48 Sweep (1200 mm) Regular model No 2984.0 2984.0 30.0 False None None False None False 89520.0 0 2922548 96302 None 245 Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. 12 Sweep (300 mm) No 2969.0 2969.0 4.0 False None None False None False 11876.0 0 2922549 96302 None 246 Supply of round/square recess/surface mounted rolling type LED Down light with W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @50/60Hz & Power factor 0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical condition- LED square or round down light 15-18W No 1324.0 1324.0 10.0 False None None False None False 13240.0 0 2922550 96302 None 247 Supplying of recess mounting non integral type LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degree K, CRI 70%. efficacy 100 lumen per W, 120degree beam spread, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level LEDs are driven by HF electronic driver integrated in a separate control gear assembly.with PF 0.95, power loss should 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.LED modular down light 1x4 34-36W No 5898.0 5898.0 6.0 False None None False None False 35388.0 0 2922551 96302 None 248 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with W System Power consumption. LED Efficiency 1301m/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia Lumileds/Osram make LED Source.Supply of LED Streetlight 70 watts No 5995.0 5995.0 3.0 False None None False None False 17985.0 0 2922552 96302 None 249 Supplying, erecting, testing & commissioning of ON-LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with isolation transformer all accessories complete and Excluding batteries and wiring complete-5 kVA ON LINE UPS Each 68383.0 68383.0 1.0 False None None False None False 68383.0 0 2922553 96302 None 250 Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries. - 60 /65 AH capacity Each 6413.0 6413.0 6.0 False None None False None False 38478.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1709635530000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1709635530000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1709635530000 1 None None ELIGIBILITY All terms and conditions as per attached tender document None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years None None None None None None Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded None None None None None None List of Financial Resources with Certificates None None None None None None The Tenderer should have Satisfactorily completed as prime contractor in the last five financial years i.e from FY-2018-19 to FY-2022-23 in any of the Government/Public Sector Undertaking, at least one similar work such as Construction of RCC building work of value not less than Rs.133.50 Lakhs (usually not less than 50% estimated value of contract). The satisfactory completion certificate issued by competent authority shall be furnished not below the rank of Executive Engineer or Equivalent Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None The Tenderer should have executed following quantities in one contract in the last five financial years i.e from FY-2018-19 to FY-2022-23 in any of the Government/Public Sector Undertaking (80% of estimated quantity). The satisfactory completion certificate issued by competent authority shall be furnished not below the rank of Executive Engineer or Equivalent.Earthwork excavation- 400 Cum PCC 1:4:8/1:3:6- 59.20 Cum RCC M20 & above- 403.35 Cum Plastering- 3218.40 Sqm Granite/Vitrified/Ceramic flooring- 705.20 Sqm TMT steel reinforcement-35.07 Tonne Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None The Tenderer shall be a Registered KPWD Civil contractor of Class-II and above Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None PWD Registration Certificate (Class I/II/III/IV) None None None None Each Tenderer should further demonstrate: availability by owning following equipment OR availability on lease/hire basis. Relevant documents such as Purchase bill, RC book for own equipment OR lease agreement/hire agreement for leased/hired equipment. Documents should be Notarized and uploaded. Concrete mixer - 01 No. Tipper - 01 No. JCB /Excavator - 01No. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Machinery ownership details None None None None The Tenderer shall furnish Valid Labour License, ESI registration certificate, EPF registration certificate and PAN card. Documents shall be scanned and uploaded. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Relevant document None None None None Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value.The available tender capacity will be calculated as under Assessed available Tender Capacity (AxNx1.5-B) Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Tender capacity document None None None None The statements showing the value of existing commitments and on-going works Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- value of existing commitments and on-going works None None None None The Tenderer shall furnish self-declaration of not being ineligible for corrupt and fraudulent practices and that the submitted documents are genuine Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Self declaration of not being ineligible for corrupt and fraudulent practices None None None None The Tenderer shall visit the proposed work site before applying tender to ascertain the type and quantum of work. Self-declaration on site visit done shall be furnished by the Tenderer Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Self declaration on site visit None None None None The Tenderer shall possess valid GST registration number. GST registration Certificate shall be scanned and uploaded. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None GST Registration None None None None To qualify for award of this Contract, each Tenderer in its name should have in the last five years i.e from FY-2018-19 to FY-2022-23, achieved in at least two financial Years a minimum financial turnover of Rs.356.00 Lakhs (Rs.267.00 Lakhs x 2 x 12/18) (usually not less than two times the estimated annual payments under this contract). (Turnover certificate shall be certified by Chartered Accountant). In support of this, the balance sheets and profit loss statements certified by a Chartered Accountant in the last five years i.e from FY-2018-19 to FY-2022-23 shall be scanned and uploaded Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None As per balance sheet certified by the Chartered Accountant, cash on hand and cash at bank and Term Deposits in any Indian Nationalized banks/ Scheduled Banks during FY-2022-23 OR Liquidity assets and or availability of credit facilities Credit lines/letter of credit/certificates from Banks for meeting the fund requirement etc., of not less than Rs.44.50 Lakhs (Rs.267.00 Lakhs x 3/18) (usually the equivalent of the estimated cash flow for three months in Peak construction period) issued by Indian Nationalized banks/ Scheduled Banks. Credit facility certificate issued by Indian Nationalized banks/ Scheduled Banks shall be addressed to Superintending Engineer (Ele) (Tech), MESCOM, Corporate Office, Mangalore shall be scanned and uploaded. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit None None None None The Tenderer shall furnish income tax returns certificate of the last five years i.e from FY-2018-19 to FY-2022-23. Documents shall be scanned and uploaded. Financial Status None createdTs version createdDate modifiedDate documentName None None None None ITR Filed Copy (Mentioning PAN)
tenderCriterionDocumentList
tenderWorkLocationList
tenderAddress	createdTs 1709711606000 version 0 createdDate None modifiedDate None blockNumber MESCOM CORPORATE OFFICE street None city Mangalore state Karnataka pin 575004
tenderRecallDTO	None