| 2920559 | 96206 | None | PWD SR 2021-22 Vol-1,P.No. 6, I.No. 1.5.1 | Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such simillar works as per drawing and technical specification, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work. In ordinary/soft rock without blasting upto 1.5 m depth (PWD SR 2021-22 Vol-1,P.No. 6, I.No. 1.5.1 ) | Cum | 229.0 | 229.0 | 20.2 | False | None | None | False | None | False | 4625.8 | 0 |
| 2920560 | 96206 | None | PWD SR 21-22,vol-II , P No.9, Item No.5.1.1 | Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :),Cement mortar 1:6 (1 cement : 6 coarse sand (PWD SR 21-22,vol-II , P No.9, Item No.5.1.1) | Cum | 5352.0 | 5352.0 | 32.18 | False | None | None | False | None | False | 172227.36 | 0 |
| 2920561 | 96206 | None | PWD SR 2021-22 Vol-1, P.No. 7, I.No. 1.9 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m (PWD SR 2021-22 Vol-1, P.No. 7, I.No. 1.9 ) | Cum | 204.0 | 204.0 | 21.89 | False | None | None | False | None | False | 4465.56 | 0 |
| 2920562 | 96206 | None | PWD SR 21-22 Item No. 6.4, Vol-2 1st addenda | Filling in foundations with granite/ trap broken metal 100mm. and down size, with approved sand Including hand packing, ramming watering. Including cost of all materials and labour with lead upto 50m. and lift of 1.5m.complete as per specifications. specification. No.KBS (PWD SR 21-22 Page No.6, Item No. 6.4, Vol-2 1st addenda) | Cum | 2561.0 | 2561.0 | 8.99 | False | None | None | False | None | False | 23023.39 | 0 |
| 2920563 | 96206 | None | PWD SR 2021-22 Vol-1,P.No. 15, I.No. 2.1.4 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggrregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost od steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates (PWD SR 2021-22 Vol-1,P.No. 15, I.No. 2.1.4 ) | Cum | 5728.0 | 5728.0 | 8.08 | False | None | None | False | None | False | 46282.24 | 0 |
| 2920564 | 96206 | None | PWD SR 2021-22 Vol-1,P.No. 16, I.No. 2.4.2 | Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) 2.4.2-M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD SR 2021-22 Vol-1,P.No. 16, I.No. 2.4.2 ) | Cum | 6266.4 | 6266.4 | 3.15 | False | None | None | False | None | False | 19739.16 | 0 |
| 2920565 | 96206 | None | PWD SR 2021-22 Vol-1,P.No. 16, I.No. 2.4.2 | Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) 2.4.2-M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD SR 2021-22 Vol-1,P.No. 16, I.No. 2.4.2 ) | Cum | 6564.8 | 6564.8 | 0.93 | False | None | None | False | None | False | 6105.264 | 0 |
| 2920566 | 96206 | None | PWD SR 2021-22 Vol-1,P.No. 16, I.No. 2.5.1 | Providing and laying in position Reinforced cement concrete for all super structures of building, Irrigation works, Super structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) 2.4.2-M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD SR 2021-22 Vol-1,P.No. 16, I.No. 2.5.1 ) | Cum | 6800.2 | 6800.2 | 2.36 | False | None | None | False | None | False | 16048.472 | 0 |
| 2920567 | 96206 | None | PWD SR 21-22 Page No.A(69) Item No.2.5.1 | Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes finsishing concrete structure in line, all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately).M20 Design Mix Using 20 mm and down size graded crushed coarse aggregates (PWD SR 21-22 Page No.A(69) Item No.2.5.1) | Cum | 7418.4 | 7418.4 | 14.47 | False | None | None | False | None | False | 107344.248 | 0 |
| 2920568 | 96206 | None | PWD SR 21-22 Page No.A(69) Item No.2.5.1 | Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes finsishing concrete structure in line, all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately).M20 Design Mix Using 20 mm and down size graded crushed coarse aggregates (PWD SR 21-22 Page No.A(69) Item No.2.5.1) | Cum | 8963.9 | 8963.9 | 0.81 | False | None | None | False | None | False | 7260.759 | 0 |
| 2920569 | 96206 | None | PWD SR 21-22,vol-II , Page No.84 , Item No.11.32 | Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately).(PWD SR 21-22,vol-II , Page No.84 , Item No.11.32) | Tonne | 96000.0 | 96000.0 | 1.95 | False | None | None | False | None | False | 187200.0 | 0 |
| 2920570 | 96206 | None | PWD SR 2021-22 Vol-2,P.No. 13, I.No. 6.2 | Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work (PWD SR 2021-22 Vol-2,P.No. 13, I.No. 6.2 ) | Cum | 6696.0 | 6696.0 | 23.65 | False | None | None | False | None | False | 158360.4 | 0 |
| 2920571 | 96206 | None | PWD SR 2021-22 Vol-2,P.No. 41, I.No. 8.2.2 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(PWD SR 2021-22 Vol-2,P.No. 41, I.No. 8.2.2 ) | Sqm | 234.0 | 234.0 | 458.53 | False | None | None | False | None | False | 107296.02 | 0 |
| 2920572 | 96206 | None | PWD SR 2021-22 Vol-2,P.No. 41, I.No. 8.4.1 | Providing 12mm cement plaster finished with a floating coat of neat cement of mix 1:3 (1 cement : 3 fine sand ) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete work as per specification and the direction of engineer incharge of work(PWD SR 2021-22 Vol-2,P.No. 41, I.No. 8.4.1 ) | Sqm | 274.0 | 274.0 | 342.93 | False | None | None | False | None | False | 93962.82 | 0 |
| 2920573 | 96206 | None | PWD SR 2018-19 Page No. Item No.14.47.1 | Providing and laying flooring using prepolished, water cut/gang saw 19mm thick granite laid over bed of 20mm thick 1:4 cm & jointed with neat cement slurry mixed with pigment to mach shade of granite slabs including laying POP on finished surface and cleaning the surface, including the cost of all materials and labours etc., complete as per specifications. - using silver grey granite / Multy Red / Ruby Red / Black / HassanGreen Granite of width not less than 1200mm (PWD SR 2018-19 Page No. Item No.14.47.1) | Sqm | 2743.0 | 2743.0 | 43.8 | False | None | None | False | None | False | 120143.4 | 0 |
| 2920574 | 96206 | None | PWD SR 2021-22 Vol-2,P.No. 100, I.No. 12.12 | Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specification (PWD SR 2021-22 Vol-2,P.No. 100, I.No. 12.12 ) | Cum | 75344.0 | 75344.0 | 0.27 | False | None | None | False | None | False | 20342.88 | 0 |
| 2920575 | 96206 | None | PWD SR 2021-22 Vol-2,P.No. 102, I.No. 12.21 | Providing and fixing in position Mathi/Nandi wood fully panelled shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specification (excluding cost of fixtures) (PWD SR 2021-22 Vol-2,P.No. 102, I.No. 12.21 ) | Sqm | 3860.0 | 3860.0 | 6.62 | False | None | None | False | None | False | 25553.2 | 0 |
| 2920576 | 96206 | None | PWD SR 2021-22 Vol-2,P.No.85, I.No. 11.34B | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc.(PWD SR 2021-22 Vol-2,P.No.85, I.No. 11.34B) | Kgs | 159.0 | 159.0 | 126.0 | False | None | None | False | None | False | 20034.0 | 0 |
| 2920577 | 96206 | None | PWD SR 21-22 Page No.91 Item No.11.44 | Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(PWD SR 21-22 Page No.91 Item No.11.44) | Sqm | 3481.0 | 3481.0 | 5.4 | False | None | None | False | None | False | 18797.4 | 0 |
| 2920578 | 96206 | None | PWD SR 2021-22 Vol-2,P.No. 47, I.No. 8.34.1 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specification and as per the direction of engineer incharge of work(PWD SR 2021-22 Vol-2,P.No. 47, I.No. 8.34.1) | Sqm | 41.0 | 41.0 | 41.58 | False | None | None | False | None | False | 1704.78 | 0 |
| 2920579 | 96206 | None | PWD SR 2021-22 Vol-2,P.No. 48, I.No. 8.41 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specification and as per the direction of engineer incharge of work(PWD SR 2021-22 Vol-2,P.No. 48, I.No. 8.41) | Sqm | 130.0 | 130.0 | 44.1 | False | None | None | False | None | False | 5733.0 | 0 |
| 2920580 | 96206 | None | PWD SR 2021-22 Vol-2,P.No. 46, I.No. 8.33. | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Special primer applied @ 0.75 ltr /10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD SR 2021-22 Vol-2,P.No. 46, I.No. 8.33.1) | Sqm | 118.0 | 118.0 | 431.3 | False | None | None | False | None | False | 50893.4 | 0 |
| 2920581 | 96206 | None | PWD 2016-17 item no13.75 | KSRB13-10.1 : Providing and fixing to wall, ceiling and floor unplasticised PVC pipes 10.00 kgs/sq.cm working pressure 16mm outside diameter chemp plast / Wavin or equivalent make with pipe fittings, wall clips, making good the wall, ceiling and floor, including cost of all materials, labour charges, HOM of equipment and testing complete as per specifications. Specification No.KBS 13.2.15.4 / 13.9 (PWD 2016-17 item no13.75) | Mtr | 107.0 | 107.0 | 20.0 | False | None | None | False | None | False | 2140.0 | 0 |
| 2920582 | 96206 | None | PWD 2016-17 item no13.73 | KSRB13-9.1 : Providing and fixing to wall, ceiling and floor high density polyethylene pipes 6.00 kgf/sq.cm working pressure 32mm outside diameter raising mains & exposed distribution pipes with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor, including cost of all materials, labour charges, HOM of equipments and testing complete as per specifications.Specification No. KBS 13.2.15.2 / 13.9 KSRB13-9.3 - do - 50 mm dia(PWD 2016-17 item no13.73) | Mtr | 328.0 | 328.0 | 10.0 | False | None | None | False | None | False | 3280.0 | 0 |
| 2920583 | 96206 | None | PWD 2018-19 item no13.78 | KSRB 13-11.1 : Providing and placing on terrace, polyethylene water storage tanks as per IS 12701 : 1996 with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow pipes, including cost of all materials, labour, transport charges, HOM of equipments and testing complete as per specifications.(For 1000 litre capacity) Specification No.KBS 13.22 .(PWD 2018-19 item no13.78) | Each | 6828.0 | 6828.0 | 1.0 | False | None | None | False | None | False | 6828.0 | 0 |
| 2920584 | 96206 | None | Water supply SR 2022-23 Page No.142. Item No.3.6 | Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) For Heavy Duty GI pipe: Heavy Duty GI pipe of 50mm dia(Water supply SR 2022-23 Page No.142. Item No.3.6 ) | Mtr | 564.0 | 564.0 | 5.0 | False | None | None | False | None | False | 2820.0 | 0 |
| 2920585 | 96206 | None | PWD SR 21-22 Page No.117 ,v-2 Item No.13.14 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 g..(PWD SR 21-22 Page No.117 ,v-2 Item No.13.14) | Each | 674.0 | 674.0 | 3.0 | False | None | None | False | None | False | 2022.0 | 0 |
| 2920586 | 96206 | None | RWS SR 2012-13 l.No.8.8.ii P.No.-54 | Supplying and erection of RCC rings for well steining of 0.30 mt depth,1.5 m dia using M-20 grade concrete using clean graded granite or trap or jelly of approved quality 20mm and down size well etc complete as per specification.RWS SR 2012-13 l.No.8.8.ii P.No.-54 | Nos | 1420.16 | 1420.16 | 6.0 | False | None | None | False | None | False | 8520.96 | 0 |
| 2920587 | 96206 | None | ELE PWD SR I NO 2.2.1 | Short point upto 3 mts from tapping point to out let via switch box | Point | 160.0 | 160.0 | 3.0 | False | None | None | False | None | False | 480.0 | 0 |
| 2920588 | 96206 | None | 2.2.2 | Medium point above 3 mts upto 6mts from tapping point to outlet via switch box | Point | 250.0 | 250.0 | 3.0 | False | None | None | False | None | False | 750.0 | 0 |
| 2920589 | 96206 | None | 2.2.3 | Long point above 6 mts upto 10 mts from tapping point to outlet via switch box | Point | 375.0 | 375.0 | 2.0 | False | None | None | False | None | False | 750.0 | 0 |
| 2920590 | 96206 | None | 3.4.1 | Supplying and flush mounting powder coated metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall 1 - 3Way | Each | 95.0 | 95.0 | 3.0 | False | None | None | False | None | False | 285.0 | 0 |
| 2920591 | 96206 | None | 3.4.2 | Supplying and flush mounting powder coated metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall 4 - 5Way | Each | 105.0 | 105.0 | 1.0 | False | None | None | False | None | False | 105.0 | 0 |
| 2920592 | 96206 | None | 3.4.3 | Supplying and flush mounting powder coated metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wal 6 Way | Each | 125.0 | 125.0 | 2.0 | False | None | None | False | None | False | 250.0 | 0 |
| 2920593 | 96206 | None | 3.4.4 | Supplying and flush mounting powder coated metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wal 8 Way | Each | 145.0 | 145.0 | 2.0 | False | None | None | False | None | False | 290.0 | 0 |
| 2920594 | 96206 | None | 3.4.5 | Supplying and flush mounting powder coated metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wal 10 / 12 Way | Each | 165.0 | 165.0 | 1.0 | False | None | None | False | None | False | 165.0 | 0 |
| 2920595 | 96206 | None | 1.2.1 | Supplying heavy gauge PVC conduit pipe ... mm dia ..mm thick with suitable size bends / metal / PVC junction boxes adhesive paste etc..and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wires where ever necessary 20 mm dia 2 mm thick. | Mtr | 40.0 | 40.0 | 20.0 | False | None | None | False | None | False | 800.0 | 0 |
| 2920596 | 96206 | None | 1.3.1 | Supplying heavy gauge PVC conduit pipe ... mm dia ..mm thick with bends metal junction boxes adhesives paste etc and bracing U or J hooks and cement plastering upto the surface of the trick level and run with 18 SWG Gi fish wire run through out the conduit wherever necessary 20 mm dia 2 mm thick | Mtr | 51.0 | 51.0 | 20.0 | False | None | None | False | None | False | 1020.0 | 0 |
| 2920597 | 96206 | None | 1.5.1 | Supplying and fixing PVC/metal conduit deep junction box . 19/20mm deep junction box | Each | 43.0 | 43.0 | 5.0 | False | None | None | False | None | False | 215.0 | 0 |
| 2920598 | 96206 | None | 1.5.2 | Supplying and fixing PVC/metal conduit deep junction box . 25mm deep junction box | Each | 47.0 | 47.0 | 5.0 | False | None | None | False | None | False | 235.0 | 0 |
| 2920599 | 96206 | None | 2.3.2 | FRLS PVC insulated 1100V grade, multistrand copper with low conductor resistance single core wire in open or concealed wiring system with specified IS -694:1990 & cofirming to Latest amendments.1.5 Sq.mm | Mtr | 20.5 | 20.5 | 20.0 | False | None | None | False | None | False | 410.0 | 0 |
| 2920600 | 96206 | None | 2.3.3 | FRLS PVC insulated 1100V grade, multistrand copper with low conductor resistance single core wire in open or concealed wiring system with specified IS -694:1990 & cofirming to Latest amendments.2.5 Sq.mm | Mtr | 32.0 | 32.0 | 20.0 | False | None | None | False | None | False | 640.0 | 0 |
| 2920601 | 96206 | None | 2.3.4 | FRLS PVC insulated 1100V grade, multistrand copper with low conductor resistance single core wire in open or concealed wiring system with specified IS -694:1990 & cofirming to Latest amendments.4.00 Sq.mm | Mtr | 45.0 | 45.0 | 10.0 | False | None | None | False | None | False | 450.0 | 0 |
| 2920602 | 96206 | None | 5.18.7 | Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single/ DOUBLE door with powder coated painting etc.Made out of 14 SWG MS enclosure. 8Way SP & N | Each | 1450.0 | 1450.0 | 2.0 | False | None | None | False | None | False | 2900.0 | 0 |
| 2920603 | 96206 | None | 5.17.1 | Supplying and fixing 6 to 32 Amps SP miniature circuit breaker 10 Ka,with C curve, on the existing MCB distribution board using necessary fixing materials and wiring complete as required | Each | 434.0 | 434.0 | 5.0 | False | None | None | False | None | False | 2170.0 | 0 |
| 2920604 | 96206 | None | 5.17.5 | Supplying and fixing 40A DP MCB miniature circuit breaker 10 Ka,with C curve,on the existing MCB distribution board using necessary fixing materials and wiring complete as required | Each | 1336.0 | 1336.0 | 3.0 | False | None | None | False | None | False | 4008.0 | 0 |
| 2920605 | 96206 | None | 5.19.4 | Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V up to 300mA sensitivity on existing wood/ panel board. 40Amps 2 pole | Each | 3850.0 | 3850.0 | 1.0 | False | None | None | False | None | False | 3850.0 | 0 |
| 2920606 | 96206 | None | 6.17.1 | Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.1.5 sq.mm | Each | 3.0 | 3.0 | 20.0 | False | None | None | False | None | False | 60.0 | 0 |
| 2920607 | 96206 | None | 6.17.2 | Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.2.5 sq.mm | Each | 4.0 | 4.0 | 2.0 | False | None | None | False | None | False | 8.0 | 0 |
| 2920608 | 96206 | None | 6.17.3 | Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.4 sq.mm | Each | 7.0 | 7.0 | 20.0 | False | None | None | False | None | False | 140.0 | 0 |
| 2920609 | 96206 | None | 6.17.4 | Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.6 sq.mm | Each | 7.0 | 7.0 | 10.0 | False | None | None | False | None | False | 70.0 | 0 |
| 2920610 | 96206 | None | 6.9.1 | Supplying and fixing of Class A (medium duty) GI Pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1KV class.40mm | Mtr | 335.0 | 335.0 | 1.0 | False | None | None | False | None | False | 335.0 | 0 |
| 2920611 | 96206 | None | 6.2.1 | Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm alround with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts. | Each | 4150.0 | 4150.0 | 1.0 | False | None | None | False | None | False | 4150.0 | 0 |
| 2920612 | 96206 | None | 6.3.1 | Supplying and running of GI Strip of size 25 x 3mm for grounding connections using necessary fixing materials as required | Rmtr | 75.0 | 75.0 | 5.0 | False | None | None | False | None | False | 375.0 | 0 |
| 2920613 | 96206 | None | 12.3.3 | LED light fighting 2X 4'-20/22watts | Each | 625.0 | 625.0 | 1.0 | False | None | None | False | None | False | 625.0 | 0 |
| 2920614 | 96206 | None | 12.3.2 | LED light fighting 4'-20/22watts | Each | 375.0 | 375.0 | 2.0 | False | None | None | False | None | False | 750.0 | 0 |
| 2920615 | 96206 | None | 12.3.1 | LED light fighting 2'-9/10watts | Each | 250.0 | 250.0 | 4.0 | False | None | None | False | None | False | 1000.0 | 0 |
| 2920616 | 96206 | None | 14.7.1 | Fixing all types and all capacities fluorescent / false ceiling /spot light / CFL / LED fitting indoors on the wall / ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires . Required nos of round blocks and clamps | Each | 110.0 | 110.0 | 3.0 | False | None | None | False | None | False | 330.0 | 0 |
| 2920617 | 96206 | None | 14.8.0 | Fixing of Wall/ ceiling fan of all capacities and all types to the existing hook together with supplying and fixing a 5 A ceiling rose , necessary length of 23/0.0076 inch PVC insulated twin twisted copper wire and wiring complete | Each | 150.0 | 150.0 | 1.0 | False | None | None | False | None | False | 150.0 | 0 |