| 1709732040000 | 0 | None | None | Buildings | Up-gradation of infrastructure facilities and Construction of STP works to MCH at Chikkodi in Belagavi District. | 9495927.69 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2946141 | 97334 | None | V-1 Sr. No. 1.15.3 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work | Cum | 562.73 | 562.73 | 131.41 | False | None | None | False | None | False | 73948.3493 | 0 | | 2946142 | 97334 | None | V-1 2.1.2 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates | Cum | 6884.02 | 6884.02 | 5.903 | False | None | None | False | None | False | 40636.37006 | 0 | | 2946143 | 97334 | None | V-1 2.5.2 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 12475.47 | 12475.47 | 36.8951 | False | None | None | False | None | False | 460283.713197 | 0 | | 2946144 | 97334 | None | V-1 2.11 (a) | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. for Building | Tonne | 108726.03 | 108726.03 | 4.51 | False | None | None | False | None | False | 490354.3953 | 0 | | 2946145 | 97334 | None | V-2 15.1 | Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. | Sqm | 992.98 | 992.98 | 112.979 | False | None | None | False | None | False | 112185.88742 | 0 | | 2946146 | 97334 | None | V-2 8.12 | Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineerin-Charge. | Kg | 77.78 | 77.78 | 35.0 | False | None | None | False | None | False | 2722.3 | 0 | | 2946147 | 97334 | None | V-2 6.32 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications | Sqm | 1592.17 | 1592.17 | 0.899 | False | None | None | False | None | False | 1431.36083 | 0 | | 2946148 | 97334 | None | V-2 8.8 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 450.91 | 450.91 | 58.379 | False | None | None | False | None | False | 26323.67489 | 0 | | 2946149 | 97334 | None | V-2 8.3.1 | Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge | Sqm | 430.25 | 430.25 | 88.22 | False | None | None | False | None | False | 37956.655 | 0 | | 2946150 | 97334 | None | V-2 8.3 | Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 211.48 | 211.48 | 58.3799 | False | None | None | False | None | False | 12346.181252 | 0 | | 2946151 | 97334 | None | XXXVIII | C. I Manhole covers 24" x 24" | No | 3040.93 | 3040.93 | 2.0 | False | None | None | False | None | False | 6081.86 | 0 | | 2946152 | 97334 | None | V-2 11.16.3 | Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Electric resistance or induction butt welded tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. | Sqm | 148.27 | 148.27 | 22.5 | False | None | None | False | None | False | 3336.075 | 0 | | 2946153 | 97334 | None | V-2 11.28 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. | Kg | 686.7 | 686.7 | 31.2 | False | None | None | False | None | False | 21425.04 | 0 | | 2946154 | 97334 | None | V-5 Item No 10.1.5 | Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. PVC pipes 75mm dia., 6 kg/sqcm & class 3 | m | 267.38 | 267.38 | 150.0 | False | None | None | False | None | False | 40107.0 | 0 | | 2946155 | 97334 | None | V-5 10.1.7 | Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. PVC pipes 110mm dia., 6 kg/sqcm & class 3 | m | 499.53 | 499.53 | 100.0 | False | None | None | False | None | False | 49953.0 | 0 | | 2946156 | 97334 | None | V-2 10.1.5 13.32.1 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15mm dia | m | 375.55 | 375.55 | 75.0 | False | None | None | False | None | False | 28166.25 | 0 | | 2946157 | 97334 | None | V-2 10.1.7 13.32.2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20mm dia | m | 460.63 | 460.63 | 50.0 | False | None | None | False | None | False | 23031.5 | 0 | | 2946158 | 97334 | None | V-2 Item No 13.32.3 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25mm dia | m | 579.74 | 579.74 | 100.0 | False | None | None | False | None | False | 57974.0 | 0 | | 2946159 | 97334 | None | V-2 13.32.1 13.32.4 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 32mm dia | m | 676.97 | 676.97 | 200.0 | False | None | None | False | None | False | 135394.0 | 0 | | 2946160 | 97334 | None | V-2 13.32.2 13.34 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank,IS:12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank. | l | 10.93 | 10.93 | 4000.0 | False | None | None | False | None | False | 43720.0 | 0 | | 2946161 | 97334 | None | V-5 13.32.3 16.9 | Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover. | No | 6628.79 | 6628.79 | 15.0 | False | None | None | False | None | False | 99431.85 | 0 | | 2946162 | 97334 | None | V-2 13.32.4 1.5.1 | Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work. In ordinary/soft rock without blasting upto 1.5 m depth | Cum | 363.4 | 363.4 | 114.75 | False | None | None | False | None | False | 41700.15 | 0 | | 2946163 | 97334 | None | V-5 1.5.1 9.1.1 | Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary ike saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. complete. NOTE: Upto 110mm dia Coil shall be used. For :HDPE PE 80 PN 6.0-HDPE Grade PE80-PN6.0, 63mm dia | m | 229.71 | 229.71 | 850.0 | False | None | None | False | None | False | 195253.5 | 0 | | 2946164 | 97334 | None | 024 | BAR SCREEN CHAMBER:
MSFRP Bar Screen chamber rectangular tank,made up of Mild steel coated with FRP lining,Bar Screen Chamber Diemesion:1000x1000x1000 Length :1000 mm,Width :1000 mm,Height :1000 mm,Mild steel sheet Thickness: 3mm,FRP Lining ,Internal Thickness : 2mm,External Thcness: 2mm,inlet nozzelDia :4 inch,outLetnozzel Dia: 4 Bar Screen Size : 10mm,screen MOC : Mild Steel,Screen coating : Epoxy,Make : Orionwater. | Lot | 53100.0 | 53100.0 | 1.0 | False | None | None | False | None | False | 53100.0 | 0 | | 2946165 | 97334 | None | 025 | RAW SEWAGE TRANSFER PUMP
Raw Sewage transfer pump capable of handling,sewage transfer from collection tank to RBC STP,maximum solid handling size upto 50 mm,Type : Centrifugal monoblock,Impeller :open,motor HP:1,RPM:2700,Flow Rate:2 m3/hr,Head:10,Moc : Cl,solid Particle Size Handling: 7 mm
A).Valve : Suction : 2 nos,Delivery : 2 nos,Size :50 mm,Moc :
B).Type : Ball /Butterfly, Non Return Valve, Delivery : 2 nos, Size :50 mm, Moc :
Make : Kriloskar / CRI, Pump (1 w + 1S) 2nos of pump = 1 set. | Set | 59000.0 | 59000.0 | 1.0 | False | None | None | False | None | False | 59000.0 | 0 | | 2946166 | 97334 | None | 026 | STP Rectamgular Tank Size and dimension:Width : 1500 mm, Over Height including Top Cover : 3000 mm, Length :6100 mm, MOC of rectangular Tank : Mild Steel, Shell Thickness: 5 mm FRP lining, Internal Liniing : 3 mm, External Lining : 3 mm, Pipe inlet Dia: 80 mm, Pipe Outlet Dia: 80 mm, Drain Header pipe Dia: 80 mm | Set | 1046660.0 | 1046660.0 | 1.0 | False | None | None | False | None | False | 1046660.0 | 0 | | 2946167 | 97334 | None | 027 | Primary clarifier : Type : Lamella, No of Plates: 10, Lamella plate MOC: FRP, Lemella Plate Thickness: 2 mm | Set | 457840.0 | 457840.0 | 1.0 | False | None | None | False | None | False | 457840.0 | 0 | | 2946168 | 97334 | None | 028 | Secondary clarifier: Type : Lamella, No of Plates: 19, Lamella plate MOC: FRP, Lemella Plate Thickness: 3 mm | Set | 450760.0 | 450760.0 | 1.0 | False | None | None | False | None | False | 450760.0 | 0 | | 2946169 | 97334 | None | 029 | ROTOR: No of Rotors: 2, Moc: FRP, Diameter of Rotor : 1000mm, Connected with , Shaft : EN 90 Rod, Driven by : pillar Block, No of pillar block: 4 | Set | 488520.0 | 488520.0 | 1.0 | False | None | None | False | None | False | 488520.0 | 0 | | 2946170 | 97334 | None | 030 | Bio Zone (Rotor Placement Boat) No. of Biozone : 1 No, No. of Partisian inside Bio-zone : 4 Nos, MOC : MSFRP, Boat curvature Diameter : 1800mm, Bio Zone supporting with 150mm, Beam 2 Nos & 4 Nos. Legs., Boat Size:3350 mm | Set | 436600.0 | 436600.0 | 1.0 | False | None | None | False | None | False | 436600.0 | 0 | | 2946171 | 97334 | None | 031 | Gear Box : Type: Helical, No of Gear Box: 1 no, Make : Bonfigoli (Germany), Gear Box Motor HP: 1, Gear Box motor Make : Seimens. | Lot | 112100.0 | 112100.0 | 1.0 | False | None | None | False | None | False | 112100.0 | 0 | | 2946172 | 97334 | None | 032 | Internal Piping & Base Works : 1) Inter connecting pipe works with FRP lining inside process tank, Recirculion& drain system. 2)Base Plate works for Gear box arrangement,Rotor Fixing arrangement,Biozone leg placement arrangement. RBC STP Make : Orionwater | Lot | 68440.0 | 68440.0 | 1.0 | False | None | None | False | None | False | 68440.0 | 0 | | 2946173 | 97334 | None | 033 | FILTER FEED PUMP: Filter feed pump capable of handling to transfer clarifed to filtration plant maximum solid handling size upto 20 mm, Type : Centrifugal monoblock, Impeller : Closed motor HP:3, RPM:1700, Flow Rate: 6m3/hr, Head:30, Moc : solid Particle Size Handling: 50mm Valve , Suction : 2 nos, Delivery : 2 nos, Size :50 mm, Moc : Type : Ball /Butterfly, Non Return Valve, Delivery : 2 nos, Size :50 mm, Moc : , Make : Kriloskar / CRI, Pump (1 w + 1S) 2nos of pump = 1 set | Lot | 29500.0 | 29500.0 | 1.0 | False | None | None | False | None | False | 29500.0 | 0 | | 2946174 | 97334 | None | 034 | SAND FILTER : Diameter: 600 mm, Height On Straight: 1900 mm, Shell hickness: 6mm, Dish end Thickness: 8mm, Frontal Pipeline:, MOC: Mild Steel, External Coating : Red Oxide and Enamel paint, Internal Coating: Black Bitumus, Fiter Media: Fine Sand, Gravel sand, pebbles,silex, Media in KG: 450, Media Depth : 915 mm, Type : Cylindrical, Vertical. | Lot | 159300.0 | 159300.0 | 1.0 | False | None | None | False | None | False | 159300.0 | 0 | | 2946175 | 97334 | None | 035 | ACTIVATED CARBON FILTER: Diameter: 600 mm,Height On Straight: 1900 mm, Shell hickness: 6mm,Dish end Thickness: 8mm Frontal Pipeline: MOC: Mild Steel,External Coating :Red Oxide and Enamel paint,Internal Coating: Black Bitumus,Fiter Media: Activated Carbon Media in KG: 150,Media Depth : 1000 mm,Type : Cylindrical. | Lot | 159300.0 | 159300.0 | 1.0 | False | None | None | False | None | False | 159300.0 | 0 | | 2946176 | 97334 | None | 036 | CHLORINE DOSING SYSTEM, Pump type : ElectonicDiaphram
Capacity : 0- 2LPH, Nominal Back pressure : 6 KG/CM2, Maximum Back pressure: 8 KG/CM2 KW: 0.24 watt, Tank Capacity : 100 Liters, MOC: PP, Make : LMI Asia | Lot | 33040.0 | 33040.0 | 1.0 | False | None | None | False | None | False | 33040.0 | 0 | | 2946177 | 97334 | None | 037 | INTERCONNECTING PIPE WORK All necessary pipe work from Bar Screen chamber to collection tank, collection tank to Raw sewage transfer pump, Raw sewage transfer pump to RBC STP, RBC STP to Filter feed pump, Filter feed pump to Filtration plant and filtration plant to treated water tank The scope shall be PVC pipes with all necessary valves, NRV , Float switch and drain Header. | Lot | 147500.0 | 147500.0 | 1.0 | False | None | None | False | None | False | 147500.0 | 0 | | 2946178 | 97334 | None | 038 | CONTROL PANEL: Installation, testing and commissioning of Electrical Panel suitable for 415V, 3 phase, 4 wire, 50Hz distribution system. The panel shall be Wall Mounting type, sheet metal enclosed, flush front with aluminium busbars, separate earth bus shall be provided throughout the length of the panel. The incoming and the outgoing feeder breakers, switch fuse units, change over switches, indicating lamps, meters etc. shall be accommodated in a modular multi-tier arrangement. The painting shall be done in conformity with IS code. Adequate size cable alley shall be provided all around the panel and at the back for easy bending and terminations. The outgoing feeders inside the panel shall be connected through solid busbars. Busbars shall be provided with PVC heat shrinkable sleeves or heat resistant insulated paint. The panels shall be suitable for cable entry from top / bottom. | Lot | 206500.0 | 206500.0 | 1.0 | False | None | None | False | None | False | 206500.0 | 0 | | 2946179 | 97334 | None | 039 | FREIGHT LOADING AND UNLOADING : All the equipment shall be loaded ,transported and unloaded at site. Including the necessary Cranes required to erect and position the system | Lot | 88500.0 | 88500.0 | 1.0 | False | None | None | False | None | False | 88500.0 | 0 | | 2946180 | 97334 | None | 040 | INSTALLATION, ERECTION, COMMISSIONING, TESTING AND HANDING OVER AT SITE. From the Inlet of the Bar Screen chamber to the output of Caron filter | Lot | 118000.0 | 118000.0 | 1.0 | False | None | None | False | None | False | 118000.0 | 0 | | 2946181 | 97334 | None | V-6 ITEMNO 32.09 | 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975
3.5 core 35 sqmm | Km | 187246.95 | 187246.95 | 0.1 | False | None | None | False | None | False | 18724.695 | 0 | | 2946182 | 97334 | None | V-6 31.06 | Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as
directed by the departmental staff 35 sqmm to 95 sqmm | Km | 37846.34 | 37846.34 | 0.1 | False | None | None | False | None | False | 3784.634 | 0 | | 2946183 | 97334 | None | 19-20 SR 6.11.3 | Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) 32mm dia | Each | 142.2 | 142.2 | 8.0 | False | None | None | False | None | False | 1137.6 | 0 | | 2946184 | 97334 | None | Sr 21-22 BSR 49.05 | Supplying and fixing of class A (medium duty) GI pipe of wall thick ness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV class. 50mm | m | 465.49 | 465.49 | 10.0 | False | None | None | False | None | False | 4654.9 | 0 | | 2946185 | 97334 | None | 19-20 SR 6.17.8 | Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 35 sqmm Long Barrel | Each | 38.89 | 38.89 | 4.0 | False | None | None | False | None | False | 155.56 | 0 | | 2946186 | 97334 | None | V-6 29.03 | Earth work excavation for cable trench of 0.5 to 0.75 M. Width and Depth upto 1 M including trial pits, depositing on bank upto a lead of 50 M,Supplying and Displaying necessary Danger Boards and Lighting, Using sightRails and Sign Boards at every 100 M wherever necessary as directed In soil (hard) | Cum | 472.79 | 472.79 | 20.0 | False | None | None | False | None | False | 9455.8 | 0 | | 2946187 | 97334 | None | V-6 12.57 | Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40mm dia 2.9mm thick 2.5 M long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm alround with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts. | No | 5172.74 | 5172.74 | 2.0 | False | None | None | False | None | False | 10345.48 | 0 | | 2946188 | 97334 | None | 19-20 SR 6.18.3 | Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc.,(75/23) 8 SWG-GI Wire | m | 23.09 | 23.09 | 50.0 | False | None | None | False | None | False | 1154.5 | 0 | | 2946189 | 97334 | None | V-6 12.58 | Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip | m | 99.66 | 99.66 | 25.0 | False | None | None | False | None | False | 2491.5 | 0 | | 2946190 | 97334 | None | 050 | Oxygen Manifold System Main :The Control pannel shall be of fully integrated type with all saftety futures inbuilt for high pressure and high flow upto 2200 ltrs / min Oxygen system. 4+4 Cylinder Oxygen Manifold Should be suitable be withstand a pressure of 140 Kg/Cm2and above, along with high pressure copper annealed tail pipes with end Brass adapter suitable for Oxygen Cylinders and manifold. Top frame comprising of high pressure copper pipes of size 12mmI.D x 1.5mm wall thick, with high pressure brass fittings made of high tensile brass and connections through non-return values; high pressure copper tail pipes, made of high pressure copper pipe of size 7mm I.D x 1.5mm wall thick and a single state high pressure high flow regulator connected to a high pressure brass block.The design of middle and bottom frames should be provided to fit both round and flat bottom cylinders safely. The manifold should be tested (hydraulically) at 3500 psig and necessary test certificates should accompany along with the supply.
Semi automatic control panel.
Semi automatic control panels designed for various control functions required during supply of oxygen through the manifold unit. Enclosed in a metal cabinet. This semi automatic control panel is highly efficient in triggering the signal for the Reserve system to go operational in case primary and secondary system fails in emergency. This panel is normally connected in a permanent mode and change over is semi automatic. Some of the features of this pannels are as follows :
Control panel shall be made of M.S.duly powder coated.Easy maintenance.Highly reliable.
Designed for safety and continuity of flow supply at a constant pressure.
Pressure gauge facility to indicate the gas pressure of each header and pipe line distribution pressure. Capable to provide a distribution flow rate in excess of 1500LPM.
Should have Incorporation of safety features in case pressure exceeds 100Psi. | Set | 179124.0 | 179124.0 | 1.0 | False | None | None | False | None | False | 179124.0 | 0 | | 2946191 | 97334 | None | 051 | Oxygen Manifold System : Emergency Supply, Installation, Testing and commissioning of 2 cylinder (1 + 1)Oxygen Cylinders Manifold supply with all necessary controls and safety fittings and 0 To 10 Kg/cm2 High Presuure Regulator complete with all lead & lift, as per specifications and as per directions of the Engineer in charge of the work. | Set | 47200.0 | 47200.0 | 1.0 | False | None | None | False | None | False | 47200.0 | 0 | | 2946192 | 97334 | None | 052 | Nitrous Oxide Main Manifold System Supply, Installation, Testing and commissioning of 2 cylinder (1 + 1) Nitrous Oxide manifold supply with all necessary controls and safety fittings. Make of AKTIV or Equilaent Make complete with all lead & lift, as per specifications and as per directions of the Engineer in charge of the work. Semi Automatic Nitrous Oxide Main Manifold Control Panel Supply, Installation, Testing and commissioning of 500 lpm deliver capacity manifold control panel, control panel should have all necessary controls and safety fittings. with all lead & lift, as per specifications and as per directions of the Engineer in charge of the work. Nitrous Oxide System ---- etc., complete with all lead & lift, as per specifications and as per directions of the Engineer in charge of the work. | Set | 88500.0 | 88500.0 | 1.0 | False | None | None | False | None | False | 88500.0 | 0 | | 2946193 | 97334 | None | 053 | Nitrous Oxide Emergency Manifold System Supply, Installation, Testing and commissioning of 1 cylinders Nitrous Oxide manifold supply with all necessary controls and safety fittings and 0 To 10 Kg/cm2 High Presuure Regulator complete with all lead & lift, as per specifications and as per directions of the Engineer in charge of the work. | Set | 47200.0 | 47200.0 | 1.0 | False | None | None | False | None | False | 47200.0 | 0 | | 2946194 | 97334 | None | 054 | Duplex Medical Air Dryer System ( Breathing Air System) 40 CFM Air Dryer Min Working Pressure should be 4 bar, Rated Inlet Pressure should be 7 bar Max Working Pressure should be 16 bar
Supply Voltage Should be 100-240 VAC, 50/60 Hz, 1 Ph
Rated Inlet temperature should be 38 deg C
Dryer capable to give should be 40 PDP
Purge Loss 15%
Air quality As per NFPA 99
Dual System
Three stage filter (Dessicated drier)
CO & Dew point level as per NFPA 99
Bacterial Penetration 0.00001%
Failure Indication
Purge Saving control Manual
No refrigerant used
Energy saving Dew point based dryer cycling. | No | 88205.0 | 88205.0 | 1.0 | False | None | None | False | None | False | 88205.0 | 0 | | 2946195 | 97334 | None | 055 | COMPRESSED AIR BREATHING FILTERATION SYSTEM-3 STAGE The filters Shouldhave maximum contaminant removal efficiency with minimum pressure drop. The filtration system should conform to breathing air filtration as per ISO 8573 Ch I Standard. Total 3-stages of filters Shouldbe used as mentioned below: Stage 1: Oil aerosol contents removal up to 0.5 mg/cum.
Stage 2: Oil aerosol contents removal up to 0.01 mg/cum.
Stage 3: Oil content removal up to 0.003 mg/cum along with removal of oil vapor and hydrocarbon odor as per ISO 8573 Ch-I Standard. | Set | 67850.0 | 67850.0 | 1.0 | False | None | None | False | None | False | 67850.0 | 0 | | 2946196 | 97334 | None | 056 | Air Cooler : Supply, Installation, Testing and Commissioning of 80 CFM Air cooler system, with 3 phase fan (High RPM Fan) suitable for 415 V, 3Phs 50 Hz | No | 81420.0 | 81420.0 | 1.0 | False | None | None | False | None | False | 81420.0 | 0 | | 2946197 | 97334 | None | 057 | Copper Fittings: Supply, Installation, Testing and Commissioning :
All copper pipes should be Solid drawn, seamless, deoxidized, non arsenical, half hard, tempered and degreased materials conforming to BS:EN :13348:2001 + A1:2005. Fittings should be made of copper and suitable for a stem of working pressure of 17 bar and Should confirm to BS 864 with specially made for brazed socket type connections. Copper Pipe 42mm. ODx1.2 mm.thick. | m | 3608.44 | 3608.44 | 50.0 | False | None | None | False | None | False | 180422.0 | 0 | | 2946198 | 97334 | None | 058 | Copper Fittings: Supply, Installation, Testing and Commissioning :
All copper pipes should be Solid drawn, seamless, deoxidized, non arsenical, half hard, tempered and degreased materials conforming to BS:EN :13348:2001 + A1:2005. Fittings should be made of copper and suitable for a stem of working pressure of 17 bar and Should confirm to BS 864 with specially made for brazed socket type connections. Copper Pipe 35mm. ODx1.2 mm.thick. | m | 2570.04 | 2570.04 | 40.0 | False | None | None | False | None | False | 102801.6 | 0 | | 2946199 | 97334 | None | 059 | Copper Fittings: Supply, Installation, Testing and Commissioning :
All copper pipes should be Solid drawn, seamless, deoxidized, non arsenical, half hard, tempered and degreased materials conforming to BS:EN :13348:2001 + A1:2005. Fittings should be made of copper and suitable for a stem of working pressure of 17 bar and Should confirm to BS 864 with specially made for brazed socket type connections. Copper Pipe 28mm. ODx0.9 mm.thick. | m | 1492.7 | 1492.7 | 180.0 | False | None | None | False | None | False | 268686.0 | 0 | | 2946200 | 97334 | None | 060 | Copper Fittings: Supply, Installation, Testing and Commissioning
All copper pipes should be Solid drawn, seamless, deoxidized, non arsenical, half hard, tempered and degreased materials conforming to BS:EN :13348:2001 + A1:2005. Fittings should be made of copper and suitable for a stem of working pressure of 17 bar and Should confirm to BS 864 with specially made for brazed socket type connections. Copper Pipe 22mm. ODx0.9 mm.thick. | m | 1156.4 | 1156.4 | 400.0 | False | None | None | False | None | False | 462560.0 | 0 | | 2946201 | 97334 | None | 061 | Copper Fittings: Supply, Installation, Testing and Commissioning :
All copper pipes should be Solid drawn, seamless, deoxidized, non arsenical, half hard, tempered and degreased materials conforming to BS:EN :13348:2001 + A1:2005. Fittings should be made of copper and suitable for a stem of working pressure of 17 bar and Should confirm to BS 864 with specially made for brazed socket type connections. Copper Pipe 15mm. ODx0.9 mm.thick. | m | 949.9 | 949.9 | 250.0 | False | None | None | False | None | False | 237475.0 | 0 | | 2946202 | 97334 | None | 062 | Copper Fittings: Supply, Installation, Testing and Commissioning :
All copper pipes should be Solid drawn, seamless, deoxidized, non arsenical, half hard, tempered and degreased materials conforming to BS:EN :13348:2001 + A1:2005. Fittings should be made of copper and suitable for a stem of working pressure of 17 bar and Should confirm to BS 864 with specially made for brazed socket type connections. Copper Pipe 12mm. ODx0.7 mm.thick. | m | 651.36 | 651.36 | 160.0 | False | None | None | False | None | False | 104217.6 | 0 | | 2946203 | 97334 | None | 063 | OUTLET POINTS Should have terminated properly Double locking DIN type valves which have a parking facility which also avoids interchanging of outlets and keys(Gas specific probes) Oxygen Terminals - drops of 10 mm dia copper pipe terminated properly DIN type valves which have a parking facility which also avoids interchanging of outlets and keys(Gas specific probes) | No | 3392.5 | 3392.5 | 55.0 | False | None | None | False | None | False | 186587.5 | 0 | | 2946204 | 97334 | None | 064 | OUTLET POINTS Should have terminated properly Double locking DIN type valves which have a parking facility which also avoids interchanging of outlets and keys(Gas specific probes) Compressed Air Terminals 4 Bar - drops of 10 mm dia copper pipe terminated properly DIN type valves which have a parking facility which also avoids interchanging of outlets and keys(Gas specific probes) | No | 3392.5 | 3392.5 | 50.0 | False | None | None | False | None | False | 169625.0 | 0 | | 2946205 | 97334 | None | 065 | OUTLET POINTS Should have terminated properly Double locking DIN type valves which have a parking facility which also avoids interchanging of outlets and keys(Gas specific probes) Compressed Air Terminals 7 Bar- drops of 10 mm dia copper pipe terminated properly DIN type valves which have a parking facility which also avoids interchanging of outlets and keys(Gas specific probes) | No | 3392.5 | 3392.5 | 4.0 | False | None | None | False | None | False | 13570.0 | 0 | | 2946206 | 97334 | None | 066 | OUTLET POINTS Should have terminated properly Double locking DIN type valves which have a parking facility which also avoids interchanging of outlets and keys(Gas specific probes) Nitous Oxide Terminals - drops of 10 mm dia copper pipe terminated properly DIN type valves which have a parking facility which also avoids interchanging of outlets and keys(Gas specific probes) | No | 3392.5 | 3392.5 | 4.0 | False | None | None | False | None | False | 13570.0 | 0 | | 2946207 | 97334 | None | 067 | Oxygen Flow meter with Humidifier Bottle Flow meter should be Backpressure Compensated. Flow meter should be accurate gas flow measurement and control within a range of 0-15 liters per minute. It should meet strict precision and durability standards. Flow meter body should be made of brass material.Flow tube and shroud components should be made of clear, impact resistant polycarbonate. The humidifier bottle should be unbreakable polycarbonate material and autoclavable at 134 degrees centigrade. The humidifier should have built in safety valve. | No | 2849.7 | 2849.7 | 55.0 | False | None | None | False | None | False | 156733.5 | 0 | | 2946208 | 97334 | None | 068 | Single piece wall mounted suction collection & regulation unit. With jar capacity of 600ml each shall be provided at each of the bed side. Jars are should be made of autoclavable materials. The units shall be clamped to the wall using suitable clamps. | No | 3528.2 | 3528.2 | 50.0 | False | None | None | False | None | False | 176410.0 | 0 | | 2946209 | 97334 | None | 069 | ISOLATION VALVES:
Should be 900 turn, ball valves of brass body, duly chrome plated on the outer periphery, SS ball with high quality Teflon seated, connected to pipeline with brass ferrule for easy maintenance. ID of the copper pipe and the ball valve should have same dimensions to avoid the flow friction for Isolation Valves 42 mm | No | 8142.0 | 8142.0 | 4.0 | False | None | None | False | None | False | 32568.0 | 0 | | 2946210 | 97334 | None | 070 | ISOLATION VALVES:
Should be 900 turn, ball valves of brass body, duly chrome plated on the outer periphery, SS ball with high quality Teflon seated, connected to pipeline with brass ferrule for easy maintenance. ID of the copper pipe and the ball valve should have same dimensions to avoid the flow friction for Isolation Valves 35 mm | No | 5428.0 | 5428.0 | 7.0 | False | None | None | False | None | False | 37996.0 | 0 | | 2946211 | 97334 | None | 071 | ISOLATION VALVES:
Should be 900 turn, ball valves of brass body, duly chrome plated on the outer periphery, SS ball with high quality Teflon seated, connected to pipeline with brass ferrule for easy maintenance. ID of the copper pipe and the ball valve should have same dimensions to avoid the flow friction for Isolation Valves 28 mm | No | 4071.0 | 4071.0 | 9.0 | False | None | None | False | None | False | 36639.0 | 0 | | 2946212 | 97334 | None | 072 | ISOLATION VALVES:
Should be 900 turn, ball valves of brass body, duly chrome plated on the outer periphery, SS ball with high quality Teflon seated, connected to pipeline with brass ferrule for easy maintenance. ID of the copper pipe and the ball valve should have same dimensions to avoid the flow friction for Isolation Valves 22 mm | No | 3392.5 | 3392.5 | 20.0 | False | None | None | False | None | False | 67850.0 | 0 | | 2946213 | 97334 | None | 073 | ISOLATION VALVES:
Should be 900 turn, ball valves of brass body, duly chrome plated on the outer periphery, SS ball with high quality Teflon seated, connected to pipeline with brass ferrule for easy maintenance. ID of the copper pipe and the ball valve should have same dimensions to avoid the flow friction for Isolation Valves 15 mm | No | 2714.0 | 2714.0 | 35.0 | False | None | None | False | None | False | 94990.0 | 0 | | 2946214 | 97334 | None | 074 | Zonal Valve box three Gas services
An Zonal area valve box should have bellow spec.
Wall mounted M.S. box with powder coated & lockable, front glass mounting easily visible & using imported brass body quarter turn ball valves using for opening & closing position.
The valve box door cannot be close during valve close position. | No | 18319.5 | 18319.5 | 3.0 | False | None | None | False | None | False | 54958.5 | 0 | | 2946215 | 97334 | None | 075 | Zonal Valve box five Gas services
An Zonal area valve box should have bellow spec.
Wall mounted M.S. box with powder coated & lockable,
front glass mounting easily visible & using imported brass body quarter turn ball valves using for opening & closing position.
The valve box door cannot be close during valve close position. | No | 23364.0 | 23364.0 | 2.0 | False | None | None | False | None | False | 46728.0 | 0 | | 2946216 | 97334 | None | 076 | Digital Area Alarm for Three Gas Systems.
Micro processor controlled Area Gas alarm panel five Lines, Should audio- visual alarms for each gas used on the floor and come fitted with test and mute button. Running on electricity 220V, these units are suggested to be fitted on each floor as well as areas of heavy usage. It should be fitted with a digital pressure gauge. It indicates low, medium & high pressure sensors. | No | 35282.0 | 35282.0 | 3.0 | False | None | None | False | None | False | 105846.0 | 0 | | 2946217 | 97334 | None | 077 | Digital Area Alarm for Five Gas Systems.
Micro processor controlled Area Gas alarm panel five Lines, Should audio- visual alarms for each gas used on the floor and come fitted with test and mute button. Running on electricity 220V, these units are suggested to be fitted on each floor as well as areas of heavy usage. It should be fitted with a digital pressure gauge. It indicates low, medium & high pressure sensors. | No | 47495.0 | 47495.0 | 2.0 | False | None | None | False | None | False | 94990.0 | 0 | | 2946218 | 97334 | None | 078 | Bed Headed Panel and Railing. 1.5M Double railing Bed headed panels should have below Specifications. Accessories 1. IV Stand extendable type with aluminium slider. 2. Monitor stand wall panel mounted. 3. Ward vaccum unit slider. 4. 3/6W LED light fixture. 5. Twpo duplex 230 V,6/16 Amp 6 nos of 6 amps sockets with control switches Electrical Sockets. Provision Medical Gas Terminal Units as follows. 2.1 Two oxygen outlet. 2.2 One Vacuum outlet. 2.3 One compressed Air outlet 4 Bar. | No | 36639.0 | 36639.0 | 2.0 | False | None | None | False | None | False | 73278.0 | 0 | | 2946219 | 97334 | None | 079 | Conversion Kit for Anesthesia for Oxygen. Should have high pressure antistatic tubing which is color coded. ---- etc., complete with all lead & lift, as per specifications and as per directions of the Engineer in charge of the work. | No | 1899.8 | 1899.8 | 2.0 | False | None | None | False | None | False | 3799.6 | 0 | | 2946220 | 97334 | None | 080 | Conversion Kit for Anesthesia for Nitrous Oxide. Should have high pressure antistatic tubing which is color coded. ---- etc., complete with all lead & lift, as per specifications and as per directions of the Engineer in charge of the work. | No | 1899.8 | 1899.8 | 2.0 | False | None | None | False | None | False | 3799.6 | 0 |
|