| tenderSubEstimateList | | createdTs | version | createdDate | modifiedDate | workCategoryName | subEstimateName | estimateTotal | itemList |
|---|
| 1709629069000 | 1 | None | None | Buildings | Construction of Ground floor | 13110807.82 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2919265 | 96119 | None | 1.12 | 1.12 Earth work in surface excavation by mechanical means for lowering &leveling the ground for all works other than foundation in all kinds ofsoils & upto depth not exceeding 300mm as per drawing and technicalspecifications, including setting out, shoring, strutting,barricading,caution lights, removal of stumps and other deleterious matter includingdressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radiusof 50 m and lift upto 1.5 m including cost of labour, tools, usage ofmachinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth | Cum | 95.0 | 95.0 | 248.1902 | False | None | None | False | None | False | 23578.069 | 0 | | 2919266 | 96119 | None | 1.14.1 | 1.14.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m | Cum | 102.0 | 102.0 | 884.24 | False | None | None | False | None | False | 90192.48 | 0 | | 2919267 | 96119 | None | 4.1 | 4.1 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. ( Vol.2, P.No.5,I.No.4.1) | Sqm | 118.0 | 118.0 | 651.7934 | False | None | None | False | None | False | 76911.6212 | 0 | | 2919268 | 96119 | None | 1.23 | 1.23 Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift complete as per specifications. | Cum | 2682.0 | 2682.0 | 91.3364 | False | None | None | False | None | False | 244964.2248 | 0 | | 2919269 | 96119 | None | 2.1.3 | 2.1.3 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates | Cum | 5989.0 | 5989.0 | 93.5923 | False | None | None | False | None | False | 560524.2847 | 0 | | 2919270 | 96119 | None | 2.5.2 | 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
| Cum | 6843.0 | 6843.0 | 161.385 | False | None | None | False | None | False | 1104357.555 | 0 | | 2919271 | 96119 | None | 2.5.2 | FORMWORK FOR FOOTING : Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
| Cum | 547.44 | 547.44 | 161.385 | False | None | None | False | None | False | 88348.6044 | 0 | | 2919272 | 96119 | None | 2.5.2 | 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
| Cum | 6843.0 | 6843.0 | 26.447 | False | None | None | False | None | False | 180976.821 | 0 | | 2919273 | 96119 | None | 2.5.2 | FORMWORK FOR PLINTH BEAM : Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
| Cum | 3421.5 | 3421.5 | 26.447 | False | None | None | False | None | False | 90488.4105 | 0 | | 2919274 | 96119 | None | 2.5.2 | 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6843.0 | 6843.0 | 16.1164 | False | None | None | False | None | False | 110284.5252 | 0 | | 2919275 | 96119 | None | 2.5.2 | FORMWORK FOR COLUMN FROM FOOTING TO PLINTH TOP: Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (The cost of steel reinforcement to be paid separately)
| Cum | 4790.1 | 4790.1 | 16.1164 | False | None | None | False | None | False | 77199.16764 | 0 | | 2919276 | 96119 | None | 2.5.2 | 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
| Cum | 6843.0 | 6843.0 | 25.6314 | False | None | None | False | None | False | 175395.6702 | 0 | | 2919277 | 96119 | None | 2.5.2 | FORMWORK FOR COLUMN : Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
| Cum | 4790.1 | 4790.1 | 25.6314 | False | None | None | False | None | False | 122776.96914 | 0 | | 2919278 | 96119 | None | 2.5.2 | 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6843.0 | 6843.0 | 35.1339 | False | None | None | False | None | False | 240421.2777 | 0 | | 2919279 | 96119 | None | 2.5.2 | FORMWORK FOR LINTEL, SLAB BEAM :Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (The cost of steel reinforcement to be paid separately) | Cum | 4105.8 | 4105.8 | 35.1339 | False | None | None | False | None | False | 144252.76662 | 0 | | 2919280 | 96119 | None | 2.5.2 | 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6843.0 | 6843.0 | 80.5037 | False | None | None | False | None | False | 550886.8191 | 0 | | 2919281 | 96119 | None | 2.5.2 | FORMWORK FOR SLAB : Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
| Cum | 3421.5 | 3421.5 | 80.5037 | False | None | None | False | None | False | 275443.40955 | 0 | | 2919282 | 96119 | None | 2.5.2 | 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
| Cum | 6843.0 | 6843.0 | 5.3942 | False | None | None | False | None | False | 36912.5106 | 0 | | 2919283 | 96119 | None | 2.5.2 | FORMWORK FOR STAIRCASE: Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
| Cum | 3421.5 | 3421.5 | 5.3942 | False | None | None | False | None | False | 18456.2553 | 0 | | 2919284 | 96119 | None | 2.5.2 | 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
| Cum | 6843.0 | 6843.0 | 1.356 | False | None | None | False | None | False | 9279.108 | 0 | | 2919285 | 96119 | None | 2.5.2 | FORMWORK FOR CHAJJA: Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
| Cum | 3079.35 | 3079.35 | 1.356 | False | None | None | False | None | False | 4175.5986 | 0 | | 2919286 | 96119 | None | 5.4 | 5.4 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
| Cum | 6389.0 | 6389.0 | 50.5827 | False | None | None | False | None | False | 323172.8703 | 0 | | 2919287 | 96119 | None | 1.8 | 1.8 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour rolling,water,all materials,usage& all other appurtenances required to complete the work.
| Cum | 474.0 | 474.0 | 420.9369 | False | None | None | False | None | False | 199524.0906 | 0 | | 2919288 | 96119 | None | 2.11 | 2.11 Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. a. Buildings
| Tonne | 89457.0 | 89457.0 | 34.8418 | False | None | None | False | None | False | 3116842.9026 | 0 | | 2919289 | 96119 | None | 2.1.4 | 2.1.4 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates
| Cum | 6217.0 | 6217.0 | 0.5537 | False | None | None | False | None | False | 3442.3529 | 0 | | 2919290 | 96119 | None | 6.2 | 6.2 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.
| Cum | 7978.0 | 7978.0 | 149.5447 | False | None | None | False | None | False | 1193067.6166 | 0 | | 2919291 | 96119 | None | 11.34A | 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding
| Kgs | 168.0 | 168.0 | 922.32 | False | None | None | False | None | False | 154949.76 | 0 | | 2919292 | 96119 | None | 12.84 | 12.84 Providing & fixing of 2 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6 PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets grey color having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 44mm width x 40mmheight with reinforcement of 1mm thickness and Sash with overall size of 27mm X 53mm with UPVC honeycomb structure inside in lieu of GI reinforcement. Coextruded Glazing bead for fixing of glass shall be of size 9.5mm x 21.5mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with Crescent Locks. Wall thickness of frame & sash shall be of 2 mm Maximum possible size 1219mm x 1219mm. (The cost is inclusive of all fixtures and separate charges for minor T&P s shall not be made (Volume 2 Page No 110 Item No. 12.84) | Sqm | 5023.0 | 5023.0 | 43.92 | False | None | None | False | None | False | 220610.16 | 0 | | 2919293 | 96119 | None | 8.3.1 | 8.3.1 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.
| Sqm | 354.0 | 354.0 | 76.3381 | False | None | None | False | None | False | 27023.6874 | 0 | | 2919294 | 96119 | None | 8.8 | 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.
| Sqm | 371.0 | 371.0 | 541.782 | False | None | None | False | None | False | 201001.122 | 0 | | 2919295 | 96119 | None | 8.1.1 | 8.1.1 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.
| Sqm | 255.0 | 255.0 | 1292.4948 | False | None | None | False | None | False | 329586.174 | 0 | | 2919296 | 96119 | None | 8.51 | 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.
| Sqm | 100.0 | 100.0 | 1873.984 | False | None | None | False | None | False | 187398.4 | 0 | | 2919297 | 96119 | None | 9.30 | 9.30 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications.
| Sqm | 5328.0 | 5328.0 | 205.0323 | False | None | None | False | None | False | 1092412.0944 | 0 | | 2919298 | 96119 | None | 9.21.2 | 9.21.2 Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm
| Sqm | 1238.0 | 1238.0 | 342.1636 | False | None | None | False | None | False | 423598.5368 | 0 | | 2919299 | 96119 | None | 8.39 | 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in- harge.
| Sqm | 127.0 | 127.0 | 1873.984 | False | None | None | False | None | False | 237995.968 | 0 | | 2919300 | 96119 | None | 12.11 | 12.11 Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications.
| Cum | 138074.0 | 138074.0 | 0.5981 | False | None | None | False | None | False | 82582.0594 | 0 | | 2919301 | 96119 | None | 12.15 | 12.15 Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. ( excluding cost of fixtures )
| Sqm | 7444.0 | 7444.0 | 26.4 | False | None | None | False | None | False | 196521.6 | 0 | | 2919302 | 96119 | None | 8.29 | 8.29 Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
| Sqm | 283.0 | 283.0 | 666.6598 | False | None | None | False | None | False | 188664.7234 | 0 | | 2919303 | 96119 | None | 8.33.2 | 8.33.2 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
| Sqm | 138.0 | 138.0 | 70.345 | False | None | None | False | None | False | 9707.61 | 0 | | 2919304 | 96119 | None | 8.33.3 | 8.33.3 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
| Sqm | 139.0 | 139.0 | 43.92 | False | None | None | False | None | False | 6104.88 | 0 | | 2919305 | 96119 | None | 12.51 | 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.
| Nos | 1016.0 | 1016.0 | 11.0 | False | None | None | False | None | False | 11176.0 | 0 | | 2919306 | 96119 | None | 8.16a | 8.16a Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup boards including cost of all materials, labour, providing and removing form work usage charges, curing, complete as per specifications.
| Sqm | 1238.0 | 1238.0 | 6.6444 | False | None | None | False | None | False | 8225.7672 | 0 | | 2919307 | 96119 | None | 11.28 | 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,
| Kgs | 565.0 | 565.0 | 158.72 | False | None | None | False | None | False | 89676.8 | 0 | | 2919308 | 96119 | None | 9.6.1 | 9.6.1 Providing and laying Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand)
| Sqm | 1269.0 | 1269.0 | 109.9527 | False | None | None | False | None | False | 139529.9763 | 0 | | 2919309 | 96119 | None | 12.69.1 | 12.69.1 Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc.150mm
| Nos | 274.0 | 274.0 | 33.0 | False | None | None | False | None | False | 9042.0 | 0 | | 2919310 | 96119 | None | 444 | Providing and fixing Hold fasts for doors etc complete ( Material Components P.No -A25 I.No 444 )
| Nos | 50.0 | 50.0 | 66.0 | False | None | None | False | None | False | 3300.0 | 0 | | 2919311 | 96119 | None | 12.73.1 | 12.73.1 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :125mm
| Nos | 44.0 | 44.0 | 22.0 | False | None | None | False | None | False | 968.0 | 0 | | 2919312 | 96119 | None | 274 | Providing and fixing Door Locks approved make and quality including cost and conveyence of all maerials with all lead and lift. etc complete ( Material Components P.No - A20 I.No 274 )
| Nos | 348.0 | 348.0 | 11.0 | False | None | None | False | None | False | 3828.0 | 0 | | 2919313 | 96119 | None | 12.63 | 12.63 Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete
| Nos | 130.0 | 130.0 | 11.0 | False | None | None | False | None | False | 1430.0 | 0 | | 2919314 | 96119 | None | 548 | Providing and fixing Screws approved Nails and screws of sizes for structural glazing /ACP Cladding ( Material Components P.No - A28 I.No 548 )
| Kgs | 67.0 | 67.0 | 6.0 | False | None | None | False | None | False | 402.0 | 0 | | 2919315 | 96119 | None | 6.15 | 6.15 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.
| Sqm | 1033.0 | 1033.0 | 9.186 | False | None | None | False | None | False | 9489.138 | 0 | | 2919316 | 96119 | None | 9.11 | 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete.
| Sqm | 889.0 | 889.0 | 23.239 | False | None | None | False | None | False | 20659.471 | 0 | | 2919317 | 96119 | None | 9.39 | 9.39 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications.
| Sqm | 1449.0 | 1449.0 | 84.744 | False | None | None | False | None | False | 122794.056 | 0 | | 2919318 | 96119 | None | 12.83.2 | 12.83.2 Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance 1mm), with wall thickness 2.0 mm ( 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm ( 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer s specification and direction of Engineer in charge
| m | 239.0 | 239.0 | 30.3 | False | None | None | False | None | False | 7241.7 | 0 | | 2919319 | 96119 | None | 12.53 | 12.53 Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat moulded PVC C channel of 5mm thick sheet & 30 x 50mm wide to form stiles & 5mm thick & 75mm wide PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick 20mm wide PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet fitted in the M.S. Frame, Sealed to the stiles & rails with 5x30mm PVC sheet beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75 mm Aluminium hinges.
| Sqm | 1588.0 | 1588.0 | 8.55 | False | None | None | False | None | False | 13577.4 | 0 | | 2919320 | 96119 | None | 1.9 | 1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
| Cum | 266.0 | 266.0 | 442.12 | False | None | None | False | None | False | 117603.92 | 0 | | 2919321 | 96119 | None | 12.95 | 12.95 Providing and fixing factory made 18 mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali, CNC (Computer Numeric Control) routed of approved design by Engineer-incharge which are machine cut for duct/shaft covering, partitions and facades comprising of virgin Polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with properties of being termite/borer proof, water/moisture proof and fire retardant and fixing
as per requirement at site with necessary stainless steel fasteners and SS
screws etc., all complete as per direction of Engineer-In-Charge. (Note: M.S
framework required with priming coat shall be paid separately)"
| Sqm | 4411.0 | 4411.0 | 26.767 | False | None | None | False | None | False | 118069.237 | 0 | | 2919322 | 96119 | None | 11.14.1.1 | 11.14.1.1 Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer- in-charge: Profile B Fixing with adjustable lugs with split end tail to each jamb including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.
| m | 470.0 | 470.0 | 29.28 | False | None | None | False | None | False | 13761.6 | 0 |
| | 1709629069000 | 0 | None | None | Buildings | Construction of Parapet | 1493173.11 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2919323 | 96120 | None | 2.5.2 | 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
| Cum | 6911.43 | 6911.43 | 2.736 | False | None | None | False | None | False | 18909.67248 | 0 | | 2919324 | 96120 | None | 2.1.3 | 2.1.3Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates
| Cum | 6048.89 | 6048.89 | 5.6205 | False | None | None | False | None | False | 33997.786245 | 0 | | 2919325 | 96120 | None | 2.5.2 | FORMWORK FOR COLUMN: Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
| Cum | 4838.0 | 4838.0 | 8.3565 | False | None | None | False | None | False | 40428.747 | 0 | | 2919326 | 96120 | None | 2.5.2 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
| Cum | 6911.43 | 6911.43 | 1.0019 | False | None | None | False | None | False | 6924.561717 | 0 | | 2919327 | 96120 | None | 2.5.2 | FORMWORK FOR LINTEL,FIRST FLOOR SLAB BEAM :Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
| Cum | 4146.86 | 4146.86 | 1.0019 | False | None | None | False | None | False | 4154.739034 | 0 | | 2919328 | 96120 | None | 2.5.2 | 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
| Cum | 6911.43 | 6911.43 | 0.078 | False | None | None | False | None | False | 539.09154 | 0 | | 2919329 | 96120 | None | 2.5.2 | FORMWORK FOR CHAJJA: Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregate
| Cum | 3110.14 | 3110.14 | 0.078 | False | None | None | False | None | False | 242.59092 | 0 | | 2919330 | 96120 | None | 2.11 | 2.11 Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. a. Buildings
| Tonne | 90351.57 | 90351.57 | 3.3642 | False | None | None | False | None | False | 303960.751794 | 0 | | 2919331 | 96120 | None | 2.1.4 | 2.1.4 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates
| Cum | 6279.17 | 6279.17 | 2.0513 | False | None | None | False | None | False | 12880.461421 | 0 | | 2919332 | 96120 | None | 6.2 | 6.2 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.
| Cum | 8057.78 | 8057.78 | 39.8411 | False | None | None | False | None | False | 321030.818758 | 0 | | 2919333 | 96120 | None | 8.8 | 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.
| Sqm | 374.71 | 374.71 | 185.017 | False | None | None | False | None | False | 69327.72007 | 0 | | 2919334 | 96120 | None | 8.1.1 | 8.1.1 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.
| Sqm | 257.55 | 257.55 | 57.453 | False | None | None | False | None | False | 14797.02015 | 0 | | 2919335 | 96120 | None | 8.51 | 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.
| Sqm | 101.0 | 101.0 | 57.453 | False | None | None | False | None | False | 5802.753 | 0 | | 2919336 | 96120 | None | 8.39 | 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in- harge.
| Sqm | 128.27 | 128.27 | 57.453 | False | None | None | False | None | False | 7369.49631 | 0 | | 2919337 | 96120 | None | 12.11 | 12.11 Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications.
| Cum | 139454.74 | 139454.74 | 0.0544 | False | None | None | False | None | False | 7586.337856 | 0 | | 2919338 | 96120 | None | 12.15 | 12.15 Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. ( excluding cost of fixtures )
| Sqm | 7518.44 | 7518.44 | 2.4 | False | None | None | False | None | False | 18044.256 | 0 | | 2919339 | 96120 | None | 8.29 | 8.29 Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
| Sqm | 285.83 | 285.83 | 185.017 | False | None | None | False | None | False | 52883.40911 | 0 | | 2919340 | 96120 | None | 8.33.2 | 8.33.2 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
| Sqm | 139.38 | 139.38 | 3.995 | False | None | None | False | None | False | 556.8231 | 0 | | 2919341 | 96120 | None | 12.51 | 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.
| Nos | 1026.16 | 1026.16 | 1.0 | False | None | None | False | None | False | 1026.16 | 0 | | 2919342 | 96120 | None | 12.69.1 | 12.69.1 Providing and fixing ISI marked oxidised M.S. single acting spring hinges
with necessary screws etc.125mm"
| Nos | 274.0 | 274.0 | 3.0 | False | None | None | False | None | False | 822.0 | 0 | | 2919343 | 96120 | None | 444 | Providing and fixing Hold fasts M.S. for doors etc complete ( Material Components P.No -A25 I.No 444 )
| Nos | 50.0 | 50.0 | 6.0 | False | None | None | False | None | False | 300.0 | 0 | | 2919344 | 96120 | None | 12.73.1 | 12.73.1 Providing and fixing ISI marked oxidised M.S. handles conforming to
IS:4992 with necessary screws etc. complete :125mm"
| Nos | 44.0 | 44.0 | 2.0 | False | None | None | False | None | False | 88.0 | 0 | | 2919345 | 96120 | None | 0134 | Providing and fixing Door Locks approved make and quality including cost and conveyence of all maerials with all lead and lift. etc complete ( Material Components P.No -XIII I.No 391 Code No : 0134 )
| Nos | 348.0 | 348.0 | 1.0 | False | None | None | False | None | False | 348.0 | 0 | | 2919346 | 96120 | None | 12.63 | 12.63 Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete
| Nos | 130.0 | 130.0 | 1.0 | False | None | None | False | None | False | 130.0 | 0 | | 2919347 | 96120 | None | 0548 | Providing and fixing Screws approved make SS Screws of sizes for structural glazing /ACP Cladding ( Material Components P.No - A28 I.No 548 Code No : 0548)
| Nos | 67.0 | 67.0 | 0.1 | False | None | None | False | None | False | 6.7 | 0 | | 2919348 | 96120 | None | 15.1 | 15.1 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge.
| Sqm | 825.17 | 825.17 | 619.1052 | False | None | None | False | None | False | 510867.037884 | 0 | | 2919349 | 96120 | None | 7.1.1 | 7.1.1 Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete as per design drawings (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer in charge.
| Sqm | 887.79 | 887.79 | 50.4 | False | None | None | False | None | False | 44744.616 | 0 | | 2919350 | 96120 | None | 11.16.1 | 11.16.1 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.
| Kgs | 137.36 | 137.36 | 112.14 | False | None | None | False | None | False | 15403.5504 | 0 |
| | 1709629069000 | 0 | None | None | Buildings | Providing Water Supply & Sanitary works | 314186.5 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2919351 | 96121 | None | 1176 | 652 PVC pipe - OD 25mm and 10 Kg/sqcm m (VOL -5 , PAGE NO-A-44).
| m | 23.0 | 23.0 | 100.0 | False | None | None | False | None | False | 2300.0 | 0 | | 2919352 | 96121 | None | 1178 | 654 PVC pipe - OD 32mm and 10 Kg/sqcm m (VOL -5 , PAGE NO-A-44).
| m | 33.0 | 33.0 | 75.0 | False | None | None | False | None | False | 2475.0 | 0 | | 2919353 | 96121 | None | 2.82.1 | 2.82 Supply of PPR Double Union Ball Valveconfirming to IS 15801-2008 and DIN Standards 8077/8092
-2.82.1 PPR Double Union Ball Valve 20mm
| Nos | 789.0 | 789.0 | 6.0 | False | None | None | False | None | False | 4734.0 | 0 | | 2919354 | 96121 | None | 2.82.2 | 2.82 Supply of PPR Double Union Ball Valve confirming to IS 15801-2008 and DIN Standards 8077/8092
-2.82.2 PPR Double Union Ball Valve 25mm
| Nos | 1076.0 | 1076.0 | 6.0 | False | None | None | False | None | False | 6456.0 | 0 | | 2919355 | 96121 | None | 2.82.3 | 2.82 Supply of PPR Double Union Ball Valveconfirming to IS 15801-2008 and DIN Standards 8077/8092
-2.82.3 PPR Double Union Ball Valve 32mm
| Nos | 1784.0 | 1784.0 | 4.0 | False | None | None | False | None | False | 7136.0 | 0 | | 2919356 | 96121 | None | 2.78.2 | 2.78 Supply of PPR Male Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092.
-2.78.2 PPR Male Threaded Elbow 20X1/2mm
| Nos | 82.0 | 82.0 | 20.0 | False | None | None | False | None | False | 1640.0 | 0 | | 2919357 | 96121 | None | 2.78.3 | 2.78 Supply of PPR Male Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092.
-2.78.3 PPR Male Threaded Elbow 25X1/2mm
| Nos | 98.0 | 98.0 | 15.0 | False | None | None | False | None | False | 1470.0 | 0 | | 2919358 | 96121 | None | 2.78.5 | 2.78 Supply of PPR Male Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092.
-2.78.5 PPR Male Threaded Elbow 32X1/2mm
| Nos | 130.0 | 130.0 | 5.0 | False | None | None | False | None | False | 650.0 | 0 | | 2919359 | 96121 | None | 2.77.2 | 2.77 Supply of PPR Female Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092
-2.77.2 PPR Female Threaded Elbow 20X1/2mm
| Nos | 56.0 | 56.0 | 20.0 | False | None | None | False | None | False | 1120.0 | 0 | | 2919360 | 96121 | None | 2.77.3 | 2.77 Supply of PPR Female Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092
-2.77.3 PPR Female Threaded Elbow 25X1/2mm
| Nos | 70.0 | 70.0 | 15.0 | False | None | None | False | None | False | 1050.0 | 0 | | 2919361 | 96121 | None | 2.77.5 | 2.77 Supply of PPR Female Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092"
-2.77.5 PPR Female Threaded Elbow 32X1/2mm
| Nos | 112.0 | 112.0 | 5.0 | False | None | None | False | None | False | 560.0 | 0 | | 2919362 | 96121 | None | 2.76 | 2.76 Supply of PPR Male Threaded TEE confirming to IS 15801-2008 and
DIN Standards 8077/8092."
2.76.2 PPR Male Threaded TEE 20X1/2mm
| Nos | 92.0 | 92.0 | 15.0 | False | None | None | False | None | False | 1380.0 | 0 | | 2919363 | 96121 | None | 2.76.3 | 2.76 Supply of PPR Male Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092."
-2.76.3 PPR Male Threaded TEE 25X1/2mm
| Nos | 102.0 | 102.0 | 20.0 | False | None | None | False | None | False | 2040.0 | 0 | | 2919364 | 96121 | None | 2.76.5 | 2.76 Supply of PPR Male Threaded TEE confirming to IS 15801-2008 and
DIN Standards 8077/8092."
-2.76.5 PPR Male Threaded TEE 32X1/2mm
| Nos | 149.0 | 149.0 | 5.0 | False | None | None | False | None | False | 745.0 | 0 | | 2919365 | 96121 | None | 2.75.2 | 2.75 Supply of PPR Female Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092
-2.75.2 PPR Female Threaded TEE 20X1/2mm
| Nos | 60.0 | 60.0 | 5.0 | False | None | None | False | None | False | 300.0 | 0 | | 2919366 | 96121 | None | 2.75.3 | 2.75 Supply of PPR Female Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092
-2.75.3 PPR Female Threaded TEE 25X1/2mm
| Nos | 74.0 | 74.0 | 15.0 | False | None | None | False | None | False | 1110.0 | 0 | | 2919367 | 96121 | None | 2.75.5 | 2.75 Supply of PPR Female Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092
-2.75.5 PPR Female Threaded TEE 32X1/2mm
| Nos | 119.0 | 119.0 | 4.0 | False | None | None | False | None | False | 476.0 | 0 | | 2919368 | 96121 | None | 13.34 | 13.34 Providing and placing on terrace (at all floor levels) polyethylenewater storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
| Ltr | 9.0 | 9.0 | 2000.0 | False | None | None | False | None | False | 18000.0 | 0 | | 2919369 | 96121 | None | 13.6.1.1 | 13.6.1.1 Providing and fixing gun metal non- return valve of approved quality (screwed end) : 25 mm nominal bore-Horizontal
| Nos | 1361.0 | 1361.0 | 5.0 | False | None | None | False | None | False | 6805.0 | 0 | | 2919370 | 96121 | None | 13.3.2 | 13.3.2 Providing and fixing brass stop cock of approved quality : 20 mm nominal bore
| Nos | 305.0 | 305.0 | 8.0 | False | None | None | False | None | False | 2440.0 | 0 | | 2919371 | 96121 | None | 13.6.2.2 | 13.6.2.2Providing and fixing gun metal non- return valve of approved quality
(screwed end) :32 mm nominal bore
| Nos | 925.0 | 925.0 | 5.0 | False | None | None | False | None | False | 4625.0 | 0 | | 2919372 | 96121 | None | 1.6.1 | 1.6.1 Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work.In all kinds of soils. Depth upto 1.50m
| Cum | 484.0 | 484.0 | 16.875 | False | None | None | False | None | False | 8167.5 | 0 | | 2919373 | 96121 | None | 633 | 633 Poly Propylene Random Co-polymer (PPR) pipe with fitting SDR 7.4 -50 mm Outer dia (VOL -5 , PAGE NO-A-43).
| Mtr | 381.0 | 381.0 | 20.0 | False | None | None | False | None | False | 7620.0 | 0 | | 2919374 | 96121 | None | 14.3.1 | 14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid
| Nos | 5977.0 | 5977.0 | 5.0 | False | None | None | False | None | False | 29885.0 | 0 | | 2919375 | 96121 | None | 14.4.1 | 14.4.1 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern
| Nos | 2866.0 | 2866.0 | 6.0 | False | None | None | False | None | False | 17196.0 | 0 | | 2919376 | 96121 | None | 14.31 | 14.31Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
| Nos | 1220.0 | 1220.0 | 4.0 | False | None | None | False | None | False | 4880.0 | 0 | | 2919377 | 96121 | None | 14.40.2 | 14.40.2 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 g.
| Nos | 496.0 | 496.0 | 4.0 | False | None | None | False | None | False | 1984.0 | 0 | | 2919378 | 96121 | None | 13.46 | 13.46 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors: 100 mm inlet and 75mm outlet, hubless centrifugally cast (spun) iron epoxy coated inside and outside IS: 15905 (REFER 1st Corrigendum and Addendum order - 21-04-2022)
| Each | 475.0 | 475.0 | 8.0 | False | None | None | False | None | False | 3800.0 | 0 | | 2919379 | 96121 | None | 9.3.4 | 9.3.4 .Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. complete. NOTE: Upto 110mm dia Coil shall be used. For :HDPE PE 80 PN 6.0 HDPE Grade PE80-PN10.0,110mm dia
| m | 650.0 | 650.0 | 45.0 | False | None | None | False | None | False | 29250.0 | 0 | | 2919380 | 96121 | None | 16.8 | 16.8 Constructing brick masonry chamber of internal dimension 600x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover
| Nos | 4791.0 | 4791.0 | 6.0 | False | None | None | False | None | False | 28746.0 | 0 | | 2919381 | 96121 | None | 16.10 | 16.10 Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.
| Nos | 4236.0 | 4236.0 | 6.0 | False | None | None | False | None | False | 25416.0 | 0 | | 2919382 | 96121 | None | 13.33.2 | 13.32.2. Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia pipes
| m | 379.0 | 379.0 | 50.0 | False | None | None | False | None | False | 18950.0 | 0 | | 2919383 | 96121 | None | 13.33.3 | 13.33.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 25 mm nominal dia Pipes
| m | 296.0 | 296.0 | 40.0 | False | None | None | False | None | False | 11840.0 | 0 | | 2919384 | 96121 | None | 647 | 647 PVC pipe - OD 110mm and 6 Kg/sqcm (VOL -5 , PAGE NO-A-44).
| m | 255.0 | 255.0 | 150.0 | False | None | None | False | None | False | 38250.0 | 0 | | 2919385 | 96121 | None | 680 | 680 PVC pipes of 8 Kg/cm2 for 75mm(0.917)m (VOL -5 , PAGE NO-A-45).
| m | 142.0 | 142.0 | 80.0 | False | None | None | False | None | False | 11360.0 | 0 | | 2919386 | 96121 | None | 10.9.6 | 10.9 Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments
-10.9.6 - 75 mm dia PVC Elbows
| Each | 192.0 | 192.0 | 25.0 | False | None | None | False | None | False | 4800.0 | 0 | | 2919387 | 96121 | None | 10.9.8 | 10.9 Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments
-10.9.8 - 110 mm dia PVC Elbows
| Each | 302.0 | 302.0 | 15.0 | False | None | None | False | None | False | 4530.0 | 0 |
| | 1709629069000 | 0 | None | None | Buildings | Electrical Works | 1351574.41 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2919388 | 96122 | None | 1.2.1 | Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary
19/20 mm dia 2 mm thick
| m | 66.0 | 66.0 | 450.0 | False | None | None | False | None | False | 29700.0 | 0 | | 2919389 | 96122 | None | 1.2.2 | Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary
-25 mm dia 2 mm thick
| m | 78.0 | 78.0 | 220.0 | False | None | None | False | None | False | 17160.0 | 0 | | 2919390 | 96122 | None | 1.3.1 | Supplying heavy gauge PVCConduit Pipe . dia . mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.
-19/20 mm dia 2 mm thick
| m | 68.0 | 68.0 | 220.0 | False | None | None | False | None | False | 14960.0 | 0 | | 2919391 | 96122 | None | 1.3.2 | Supplying heavy gauge PVCConduit Pipe . dia . mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.
-25 mm dia 2 mm thick
| m | 79.0 | 79.0 | 160.0 | False | None | None | False | None | False | 12640.0 | 0 | | 2919392 | 96122 | None | 1.5.1 | Supplying and fixing PVC/metal conduit Deep junction box
-19/20 mm deep Junction box
| Each | 49.0 | 49.0 | 40.0 | False | None | None | False | None | False | 1960.0 | 0 | | 2919393 | 96122 | None | 1.5.2 | Supplying and fixing PVC/metal conduit Deep junction box
-25 mm deep Junction box
| Each | 56.0 | 56.0 | 15.0 | False | None | None | False | None | False | 840.0 | 0 | | 2919394 | 96122 | None | 1.7.1 | Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete.
-upto 50 mm conduit in brick wall
| m | 29.0 | 29.0 | 120.0 | False | None | None | False | None | False | 3480.0 | 0 | | 2919395 | 96122 | None | 1.13 | Supplying And Fixing Metal Fan Box with Round Hook.
| No | 117.0 | 117.0 | 29.0 | False | None | None | False | None | False | 3393.0 | 0 | | 2919396 | 96122 | None | 2.2.1 | Point wiring using Copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.
-Short point upto 3Mtr from tapping point to out let via switch box
| Point | 269.0 | 269.0 | 20.0 | False | None | None | False | None | False | 5380.0 | 0 | | 2919397 | 96122 | None | 2.2.2 | Point wiring using Copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.
-Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box
| Point | 379.0 | 379.0 | 25.0 | False | None | None | False | None | False | 9475.0 | 0 | | 2919398 | 96122 | None | 2.2.3 | Point wiring using Copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.
-Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box
| Point | 555.0 | 555.0 | 64.0 | False | None | None | False | None | False | 35520.0 | 0 | | 2919399 | 96122 | None | 2.3.2 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010
-1.5 mm2
| m | 26.0 | 26.0 | 2500.0 | False | None | None | False | None | False | 65000.0 | 0 | | 2919400 | 96122 | None | 2.3.3 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010
-2.5 mm2
| m | 42.0 | 42.0 | 2200.0 | False | None | None | False | None | False | 92400.0 | 0 | | 2919401 | 96122 | None | 2.3.4 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010
-4 mm2
| m | 63.0 | 63.0 | 2800.0 | False | None | None | False | None | False | 176400.0 | 0 | | 2919402 | 96122 | None | 2.3.5 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010
-6 mm2
| m | 92.0 | 92.0 | 1200.0 | False | None | None | False | None | False | 110400.0 | 0 | | 2919403 | 96122 | None | 2.3.6 | Main panel
10 mm2
| m | 167.0 | 167.0 | 60.0 | False | None | None | False | None | False | 10020.0 | 0 | | 2919404 | 96122 | None | 3.4.1 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall
-1-2 Way
| Each | 138.0 | 138.0 | 32.0 | False | None | None | False | None | False | 4416.0 | 0 | | 2919405 | 96122 | None | 3.4.4 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall
-6 Way
| Each | 220.0 | 220.0 | 14.0 | False | None | None | False | None | False | 3080.0 | 0 | | 2919406 | 96122 | None | 3.4.6 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall
-10-12 Way
| Each | 319.0 | 319.0 | 46.0 | False | None | None | False | None | False | 14674.0 | 0 | | 2919407 | 96122 | None | 3.5.1 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.
-1 to 2 Module
| Each | 137.0 | 137.0 | 32.0 | False | None | None | False | None | False | 4384.0 | 0 | | 2919408 | 96122 | None | 3.5.4 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.
-6 Module
| Each | 234.0 | 234.0 | 14.0 | False | None | None | False | None | False | 3276.0 | 0 | | 2919409 | 96122 | None | 3.5.6 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.
-10-12 Module
| Each | 344.0 | 344.0 | 46.0 | False | None | None | False | None | False | 15824.0 | 0 | | 2919410 | 96122 | None | 3.6.1 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.
-6A One Way Switch
| Each | 102.0 | 102.0 | 243.0 | False | None | None | False | None | False | 24786.0 | 0 | | 2919411 | 96122 | None | 3.6.2 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.
-6A Two Way Switch
| Each | 166.0 | 166.0 | 2.0 | False | None | None | False | None | False | 332.0 | 0 | | 2919412 | 96122 | None | 3.6.3 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.
-6A Three Way socket
| Each | 171.0 | 171.0 | 140.0 | False | None | None | False | None | False | 23940.0 | 0 | | 2919413 | 96122 | None | 3.6.4 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.
-Stepped Fan Regulator Two Module
| Each | 357.0 | 357.0 | 27.0 | False | None | None | False | None | False | 9639.0 | 0 | | 2919414 | 96122 | None | 3.6.7 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.
-16A One Way Switch
| Each | 180.0 | 180.0 | 21.0 | False | None | None | False | None | False | 3780.0 | 0 | | 2919415 | 96122 | None | 3.6.10 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.
-6/16A Universal Socket
| Each | 236.0 | 236.0 | 21.0 | False | None | None | False | None | False | 4956.0 | 0 | | 2919416 | 96122 | None | 3.6.11 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.
-TV/Telephone Socket
| Each | 156.0 | 156.0 | 4.0 | False | None | None | False | None | False | 624.0 | 0 | | 2919417 | 96122 | None | 5.18.1 | Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.
-6-32 A SP
| Each | 415.0 | 415.0 | 24.0 | False | None | None | False | None | False | 9960.0 | 0 | | 2919418 | 96122 | None | 5.18.4 | Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.
-6-32 A DP
| Each | 739.0 | 739.0 | 6.0 | False | None | None | False | None | False | 4434.0 | 0 | | 2919419 | 96122 | None | 5.19.6 | Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.
-4 Way SP & N
| Each | 1524.0 | 1524.0 | 1.0 | False | None | None | False | None | False | 1524.0 | 0 | | 2919420 | 96122 | None | 5.19.9 | Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.
-12 Way SP & N
| Each | 2329.0 | 2329.0 | 2.0 | False | None | None | False | None | False | 4658.0 | 0 | | 2919421 | 96122 | None | 5.19.11 | III - Double Door
-4 Way TP & N
| Each | 4038.0 | 4038.0 | 2.0 | False | None | None | False | None | False | 8076.0 | 0 | | 2919422 | 96122 | None | 5.18.9 | 50-63 A TPN
| Each | 3088.0 | 3088.0 | 6.0 | False | None | None | False | None | False | 18528.0 | 0 | | 2919423 | 96122 | None | 5.20.4 | Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board.
-32-40A 2 pole
| Each | 4559.0 | 4559.0 | 2.0 | False | None | None | False | None | False | 9118.0 | 0 | | 2919424 | 96122 | None | 6.1 | Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply.
| Each | 1492.0 | 1492.0 | 5.0 | False | None | None | False | None | False | 7460.0 | 0 | | 2919425 | 96122 | None | 6.3.1 | Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system.
-48" Sweep (1200 mm) Regular model
| Each | 2984.0 | 2984.0 | 29.0 | False | None | None | False | None | False | 86536.0 | 0 | | 2919426 | 96122 | None | 8.3 | Supplying and drawing PVC insulated gas injected physical foam jelly flooded co-axial TV cable.RG-6.
| m | 44.0 | 44.0 | 180.0 | False | None | None | False | None | False | 7920.0 | 0 | | 2919427 | 96122 | None | 11.3.2 | Supplying of .feet -PVC Batten with integrated LED tube . W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI
80. Power Input: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.
-LED light fitting 1 x 4 - 20/22 W
| Each | 690.0 | 690.0 | 62.0 | False | None | None | False | None | False | 42780.0 | 0 | | 2919428 | 96122 | None | 12.2.1 | Supplying and fixing one of 230 V Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote.
-Ding Dong Bell
| Each | 246.0 | 246.0 | 5.0 | False | None | None | False | None | False | 1230.0 | 0 | | 2919429 | 96122 | None | 12.56 | Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia
| No | 3510.0 | 3510.0 | 6.0 | False | None | None | False | None | False | 21060.0 | 0 | | 2919430 | 96122 | None | 12.58.2 | GI/Copper strips for grounding connections, using necessary fixing materials as required.
-GI/Copper strips 25 x 3 mm GI strip
| m | 82.0 | 82.0 | 80.0 | False | None | None | False | None | False | 6560.0 | 0 | | 2919431 | 96122 | None | 13.7.1 | Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamps.
-On wall/ ceiling / Rafter / Girders
| Each | 122.0 | 122.0 | 40.0 | False | None | None | False | None | False | 4880.0 | 0 | | 2919432 | 96122 | None | 13.10 | Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring.
| Each | 171.0 | 171.0 | 29.0 | False | None | None | False | None | False | 4959.0 | 0 | | 2919433 | 96122 | None | 13.14 | Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire.
| Each | 492.0 | 492.0 | 5.0 | False | None | None | False | None | False | 2460.0 | 0 | | 2919434 | 96122 | None | 5.21 | Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage current, programmable delay/auto/ manual reset facility suitable to mount on DIN rail/ flush mounting on panel board.
| Each | 9255.0 | 9255.0 | 1.0 | False | None | None | False | None | False | 9255.0 | 0 | | 2919435 | 96122 | None | 5.34 | Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound.
| Each | 562.0 | 562.0 | 3.0 | False | None | None | False | None | False | 1686.0 | 0 | | 2919436 | 96122 | None | 5.38 | Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.
| Each | 515.0 | 515.0 | 3.0 | False | None | None | False | None | False | 1545.0 | 0 | | 2919437 | 96122 | None | 5.15.10 | Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuitwith adjustable thermal magnetic release, Micro processor release shall have Earth Fault as per IS/IEC 60947-2 . (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.
-FOUR Pole
-125 A 25 kA
| Each | 10341.0 | 10341.0 | 1.0 | False | None | None | False | None | False | 10341.0 | 0 | | 2919438 | 96122 | None | 5.40.1 | Supplying . A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete
-100 A 4 x 30 x 6 mm Aluminium Strips
| m | 2465.0 | 2465.0 | 1.0 | False | None | None | False | None | False | 2465.0 | 0 | | 2919439 | 96122 | None | 5.40.1 | Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. Flat.with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.
-40 x 40 x 6 mm
| m | 305.0 | 305.0 | 25.0 | False | None | None | False | None | False | 7625.0 | 0 | | 2919440 | 96122 | None | 5.42.1 | Fabricating supplying and mounting MS box made out .SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete.
-14 SWG
| cm | 0.5 | 0.5 | 160000.0 | False | None | None | False | None | False | 80000.0 | 0 | | 2919441 | 96122 | None | 8.1 | Supplying and drawing UTP-CAT 6E LAN cable.
| m | 38.0 | 38.0 | 650.0 | False | None | None | False | None | False | 24700.0 | 0 | | 2919442 | 96122 | None | 8.2.2 | Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable.
-2Pair
| m | 21.0 | 21.0 | 350.0 | False | None | None | False | None | False | 7350.0 | 0 | | 2919443 | 96122 | None | 8.4.6 | Supplying & Fixing of switch mounting rack with power manager & Cable manager.
-24U with 650mm depth
| Each | 31386.0 | 31386.0 | 1.0 | False | None | None | False | None | False | 31386.0 | 0 | | 2919444 | 96122 | None | 8.9.9 | 48 port 10/100/1000 Switch
| Each | 20300.0 | 20300.0 | 1.0 | False | None | None | False | None | False | 20300.0 | 0 | | 2919445 | 96122 | None | 8.10.1 | Supplying & fixing of I/O socket with back box
-Single I/O
| Each | 490.0 | 490.0 | 32.0 | False | None | None | False | None | False | 15680.0 | 0 | | 2919446 | 96122 | None | 8.11.2 | Supplying & Fixing of . ms Cat 6 Patch Cable
-2 m
| Each | 257.0 | 257.0 | 32.0 | False | None | None | False | None | False | 8224.0 | 0 | | 2919447 | 96122 | None | 9.1.3 | Supplying, erecting, testing and commissioning of voltage stabilizer suitable for 170 to 270 v input and load variation from no load to full load, with over load protection, spike suppression, operating at 00 C to 400 C. Range etc., complete.
-5kVA Capacity
| Each | 9666.0 | 9666.0 | 4.0 | False | None | None | False | None | False | 38664.0 | 0 | | 2919448 | 96122 | None | 13.1.2 | Supplying and Fixing of.mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or rail or RCC pole / wall using suitable clamps, bolts, and nuts and wiring using suitable capacity wires.
-Using 32mm dia G.I.Pipe
| Each | 1045.0 | 1045.0 | 5.0 | False | None | None | False | None | False | 5225.0 | 0 | | 2919449 | 96122 | None | 32.05 | 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975
"-16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm)
(ESCOMs SR P No.13 IT No. 32.05)"
| Km | 141842.5 | 141842.5 | 0.3 | False | None | None | False | None | False | 42552.75 | 0 | | 2919450 | 96122 | None | 32.11 | 50 Sqmm, 3.5 Core, (16 GI Strips - 4 x 0.8 mm)
(ESCOMs SR P No.13 IT No 32.11)
| Km | 178973.2 | 178973.2 | 0.3 | False | None | None | False | None | False | 53691.96 | 0 | | 2919451 | 96122 | None | 239 | HDPE pipe grade PE100-PN 10, 63mm
(WSSW SR P No.A-32 IT No.239)
| m | 132.0 | 132.0 | 280.0 | False | None | None | False | None | False | 36960.0 | 0 | | 2919452 | 96122 | None | 21.06 | Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff
"35 to 95 Sqmm
(ESCOMs SR P No.52 IT No. 21.06)"
| Km | 31139.0 | 31139.0 | 0.3 | False | None | None | False | None | False | 9341.7 | 0 |
|
|
|---|