| 2956801 | 97745 | None | Page No_5,Item No _1.4.1 PWD SR 2023_24 Volume_1 | Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. | Cum | 266.2 | 266.2 | 79.812 | False | None | None | False | None | False | 21245.9544 | 0 |
| 2956802 | 97745 | None | Page No_15,Item No_2.1.3 PWD SR 2023_24 Volume_1 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates | Cum | 6863.2 | 6863.2 | 12.8 | False | None | None | False | None | False | 87848.96 | 0 |
| 2956803 | 97745 | None | Page No_9,Item No_5.4 PWD SR 2023_24Volume_2 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) | Cum | 7027.9 | 7027.9 | 21.024 | False | None | None | False | None | False | 147754.5696 | 0 |
| 2956804 | 97745 | None | Page No_44 Item No_8.19.1 PWD SR 2023-24 Volume_2 | Providing Flush/Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge. | Sqm | 280.5 | 280.5 | 13.12 | False | None | None | False | None | False | 3680.16 | 0 |
| 2956805 | 97745 | None | Page N0_7,Item No_1.9 PWD SR 2023_24 Volume_1 | Filling available excavated earth (excluding rock) in sides of foundations upto plinth in layers not exceeding 20cms, in depth, compacting each deposited layers by ramming after watering with lead upto 50m, and lift upto 1.5m, including cost of all labour complete as per specifications, specification. | Cum | 292.6 | 292.6 | 79.812 | False | None | None | False | None | False | 23352.9912 | 0 |
| 2956806 | 97745 | None | Page No_17,Item No_2.4.3PWD SR 2023_24 Volume_1 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 7318.08 | 7318.08 | 15.43 | False | None | None | False | None | False | 112917.9744 | 0 |
| 2956807 | 97745 | None | Page No_17,Item No_2.4.1PWD SR 2023_24 Volume_1 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 (M15) Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 7396.62 | 7396.62 | 4.194 | False | None | None | False | None | False | 31021.42428 | 0 |
| 2956808 | 97745 | None | Page No_17,Item No2.4.1PWD SR 2023_24Volume_1 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.a. Buildings | Tonne | 98402.7 | 98402.7 | 1.54 | False | None | None | False | None | False | 151540.158 | 0 |
| 2956809 | 97745 | None | Page No_17Item No_6.33 PWD SR 2023_24 Volume_2 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. | Sqm | 1354.1 | 1354.1 | 112.55 | False | None | None | False | None | False | 152403.955 | 0 |
| 2956810 | 97745 | None | Page No_78,Item No_11.6.1PWD SR 2023_24Volume_2 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge | Sqm | 2896.3 | 2896.3 | 10.8 | False | None | None | False | None | False | 31280.04 | 0 |
| 2956811 | 97745 | None | Page No_41,Item No_8.3.1PWD SR 2023_24Volume_2 | Providing 20 mm thick cement plaster in single coat with cement mortar 1:3, to stone masonryincluding rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications. | Sqm | 389.4 | 389.4 | 145.72 | False | None | None | False | None | False | 56743.368 | 0 |
| 2956812 | 97745 | None | Page No_42,Item No_8.8 PWD SR 2023_24Volume_2 | Providing 18mm thick cement plaster in single coat with cement mortar 1:3, to ceiling incluidng rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materials, labour curing complete as per specification . | Sqm | 408.1 | 408.1 | 73.08 | False | None | None | False | None | False | 29823.948 | 0 |
| 2956813 | 97745 | None | Page No_42,Item No_8.6.1PWD SR 2023_24Volume_2 | Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer incharge. | Sqm | 355.3 | 355.3 | 48.12 | False | None | None | False | None | False | 17097.036 | 0 |
| 2956814 | 97745 | None | Page No_63,Item No_9.24PWD SR 2023-24Volume_214 | Providing and laying flooring using prepolished, water cut/gang saw 19mm thick granite laid over bed of 20mm thick 1:4 cm & jointed with neat cement slurry mixed with pigment to mach shade of granite slabs including laying POP on finished surface and cleaning the surface, including the cost of all materials and labours etc., complete as per specifications. - using silver grey granite / Multy Red / Ruby Red / Black / HassanGreen Granite of width not less than 1200mm | Sqm | 3137.2 | 3137.2 | 77.13 | False | None | None | False | None | False | 241972.236 | 0 |
| 2956815 | 97745 | None | Page No_86,Item No_11.34 B PWD SR 2023_24 Volume_2 | Providing and fixing M.S.grill work for windows and ventilators weighing 21kg/sqm using M.S. flats, or M.S. square rods, or combination of M.S. flats and square rods as per approved design, drawing including cutting steel sections and welding the same to required pattern with a coat of red lead primer, cost of materials, fixtures, labour and HOM of machinery complete as per specifications. | Kg | 201.3 | 201.3 | 120.96 | False | None | None | False | None | False | 24349.248 | 0 |
| 2956816 | 97745 | None | Page No_47,Item No_8.34.3PWD SR 2023_24Volume_2 | Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and complete as per specifications. | Sqm | 55.0 | 55.0 | 28.349 | False | None | None | False | None | False | 1559.195 | 0 |
| 2956817 | 97745 | None | Page No_48,Item No_8.40PWD SR 2023_24Volume_2 | Providing and applying enamel metal paint two coats (excluding priming coat) over new steel or other metal surface brushing to give an even shade after cleaning oil, grease, dirt and other foreign matter, including cost of materials, labour, complete as per specifications | Sqm | 126.5 | 126.5 | 27.36 | False | None | None | False | None | False | 3461.04 | 0 |
| 2956818 | 97745 | None | Page No_52,Item No_8.72.1PWD SR 2023_24Volume_2 | Providing and finishing external walls in two coats with waterproof cement paint of approved brand and shade to give an even shade after throughly brooming the surface to remove all dirt and loose powdered material, free from mortar drops and other foreign matter cost of materials, labour, complete as per specifications. - with primer. | Sqm | 93.96 | 93.96 | 122.27 | False | None | None | False | None | False | 11488.4892 | 0 |
| 2956819 | 97745 | None | Page No_45,Item No_8.25PWD SR 2023_24 Volume_2 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge | Sqm | 150.7 | 150.7 | 118.62 | False | None | None | False | None | False | 17876.034 | 0 |
| 2956820 | 97745 | None | Page No_91,Item No_11.44 PWD SR 2023_24 Volume_2 | Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction ofEngineer-in-charge complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge | Sqm | 4779.5 | 4779.5 | 19.8 | False | None | None | False | None | False | 94634.1 | 0 |
| 2956821 | 97745 | None | P_247,I_21.1.9,BWSSB SR 2023_24 | Water purification plants: Providing, Installation and Commissioning of automatic Water purification plant (RO+UF) with all accessories piping, product water tank on single phase power supply as per the enclosed detailed Technical Specifications including cost of material, loading and unloading and as directed by the Engineer in charge. (Ref- detailed specification enclosed seperatly). Note:1.The above rates mentioned are only for the preparation of estimate purpose. 2. All items are to be of BSI /NFS standards,with BSI / NFS mark . 3. Tenders to be invited for procurement. 4. No direct payment should be made under any situation or condition or on any account. 5. After commissioning of plant necessary testing to be done for the satisfactory of Engineer Incharge. Note : Refer the ANNEXURE : F for Detailed Spec (RWS SR 2023-24 P-247, I-21.1.9) | Nos | 441000.0 | 441000.0 | 2.0 | False | None | None | False | None | False | 882000.0 | 0 |
| 2956822 | 97745 | None | pg no_95,sl no_9.1.1 BWSSB SR 2023_24 | Providing, laying and jointing HDPE pipes of specified grade andconforming to IS 4984-2016 with latest ammendments and conveyingto work site including loading and unloading at both destinations androlling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic testas per relevant ISS with all lead and lifts including encasing the pipealround to a depth of not less than 15 cms. with soft gravel or selectedearth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessarylike saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete(Contractor will make his own arrangements for procuring water fortesting) etc. complete. NOTE: Upto 110mm dia Coil shall be used.
For :HDPE PE 80 PN 6.0 | Mtr | 189.0 | 189.0 | 80.0 | False | None | None | False | None | False | 15120.0 | 0 |
| 2956823 | 97745 | None | Page No_123,Item No_13.34PWD SR 2023-24 Volume_2 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (For 1000 litre capacity) | Ltr | 9.9 | 9.9 | 2000.0 | False | None | None | False | None | False | 19800.0 | 0 |
| 2956824 | 97745 | None | P-122 ,I No_13.32.2 vol_2 PWD SR 2023_24 | Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement & the cost of cutting chases & making good the same including testing of joints complete. (Concealed work including cutting chases and good the walls etc.)20mm nominal OD pipes | Mtr | 416.9 | 416.9 | 40.0 | False | None | None | False | None | False | 16676.0 | 0 |
| 2956825 | 97745 | None | P_122,I No_13.32.3 of PWD SR 2023_24 | Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement & the cost of cutting chases & making good the same including testing of joints complete. (Concealed work including cutting chases and good the walls etc.)20mm nominal OD pipes | Mtr | 524.7 | 524.7 | 40.0 | False | None | None | False | None | False | 20988.0 | 0 |
| 2956826 | 97745 | None | P-122,I No_13.32.4 of PWD SR 2023_24 | Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement & the cost of cutting chases & making good the same including testing of joints complete. (Concealed work including cutting chases and good the walls etc.)20mm nominal OD pipes | Mtr | 612.7 | 612.7 | 40.0 | False | None | None | False | None | False | 24508.0 | 0 |
| 2956827 | 97745 | None | P_2of105,I No_1.3.1 of BESCOM SR 2023_24 | Supplying heavy gauge PVC Conduit Pipe 19/20 mm dia 2 mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. | Mtr | 74.8 | 74.8 | 40.0 | False | None | None | False | None | False | 2992.0 | 0 |
| 2956828 | 97745 | None | P_5 of 105,I No_2.3.2,2.3.3,2.3.4 ofBESCOMSR 23_24 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP of GROUP A a)1.50 Sq mm | Mtr | 28.6 | 28.6 | 120.0 | False | None | None | False | None | False | 3432.0 | 0 |
| 2956829 | 97745 | None | P_5 of105,I No_2.3.2,2.3.3,2.3.4of BESCOM SR23_24 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS694:1990 & confirming to GTP of GROUPA b) 2.5 Sq mm | Mtr | 46.2 | 46.2 | 80.0 | False | None | None | False | None | False | 3696.0 | 0 |
| 2956830 | 97745 | None | P_5 of105,I No_2.3.2,2.3.3,2.3.4 of BESCOM SR23_24 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS694:1990 & confirming to GTP of GROUP A c) 4.0 Sq mm | Mtr | 69.3 | 69.3 | 40.0 | False | None | None | False | None | False | 2772.0 | 0 |
| 2956831 | 97745 | None | P_5of 105,I No_2.1of BESCOM SR 2023_24) | Supplying and wiring adopting loop system in existing PVCConduit /casing capping using 2x1.5Sqmm (Phase & Neutral) &1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulatedcopper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existingplastic sheet/ gang box, the other end of the wires shall be terminatedwith sufficient loose length in a wood/PVC round block. complete for each outlet.a)Short Point up to 3.0 Mtr from tapping point to out let via switch box 2.1.1 | Point | 313.5 | 313.5 | 8.0 | False | None | None | False | None | False | 2508.0 | 0 |
| 2956832 | 97745 | None | P_5 of 105,I No_2.1of BESCOM SR 2023_24) | Supplying and wiring adopting loop system in existing PVCConduit /casing capping using 2x1.5Sqmm (Phase & Neutral) &1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulatedcopper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existingplastic sheet/ gang box, the other end of the wires shall be terminatedwith sufficient loose length in a wood/PVC round block. complete for each outletb)Medium Point above 3.0 Mtr Up to 6 Mtrfrom tapping point to out let via switch box 2.1.2 | Point | 433.4 | 433.4 | 4.0 | False | None | None | False | None | False | 1733.6 | 0 |
| 2956833 | 97745 | None | P_5 of 105,I No_2.1of BESCOM SR 2023_24) | Supplying and wiring adopting loop system in existing PVCConduit /casing capping using 2x1.5Sqmm (Phase & Neutral) &1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulatedcopper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existingplastic sheet/ gang box, the other end of the wires shall be terminatedwith sufficient loose length in a wood/PVC round block. complete for each outletc)Long Point Above 6.0 Mtr Up to 10 Mtr from tapping point to out let via switch box 2.1.3 | Point | 627.0 | 627.0 | 2.0 | False | None | None | False | None | False | 1254.0 | 0 |
| 2956834 | 97745 | None | P_3 of 105 I No_1.6.3&1.6.1of BESCOM SR 2023_24 | Supplying and flush mounting teak wooden box without front plank, made of not less than 12mm thick wood, after due groove cutting, Finishing with necessary cement plastering complete (1.6.5) 4"x4"x3" ( 101x101x76mm) 1) 10''x7''x3'' | Nos | 123.2 | 123.2 | 4.0 | False | None | None | False | None | False | 492.8 | 0 |
| 2956835 | 97745 | None | P_3of 105,I No_1.6.3&1.6.1 of BESCOM SR 2023_24 | Supplying and flush mounting teak wooden box without front plank, made of not less than 12mm thick wood, after due groove cutting, Finishing with necessary cement plastering complete (1.6.5) 4"x4"x3" ( 101x101x76mm) 2)12''x3''x3'' | Nos | 132.0 | 132.0 | 4.0 | False | None | None | False | None | False | 528.0 | 0 |
| 2956836 | 97745 | None | P_8of 105,I No_3.5.2&3.5.7 of BESCOM SR 2023_24) | Supplying and fixing superior quality modular switch mounting polycorbonate plate with necessary supporting back plate with required nos of machine screws bolts nuts, etc complete on the existing metal/PVC box a) 3 module | Each | 177.1 | 177.1 | 6.0 | False | None | None | False | None | False | 1062.6 | 0 |
| 2956837 | 97745 | None | P_8 of 105,I No_3.5.2&3.5.7 of BESCOM SR 2023_24) | Supplying and fixing superior quality modular switch mounting polycorbonate plate with necessary supporting back plate with required nos of machine screws bolts nuts, etc complete on the existing metal/PVC box b)16 Module | Each | 436.7 | 436.7 | 4.0 | False | None | None | False | None | False | 1746.8 | 0 |
| 2956838 | 97745 | None | P_9 of 105,I No_3.5.2&3.5.7of BESCOM SR 2023_24 | Supplying and fixing modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 a)6 Amps 3 way socket I-3.6.3 | Each | 188.1 | 188.1 | 2.0 | False | None | None | False | None | False | 376.2 | 0 |
| 2956839 | 97745 | None | P_9 of 105,I No_3.5.2&3.5.7 of BESCOM SR 2023_24 | Supplying and fixing modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 b)6 Amps one way switch only I-3.6.8 | Each | 112.2 | 112.2 | 4.0 | False | None | None | False | None | False | 448.8 | 0 |
| 2956840 | 97745 | None | P_9 of 105,i No_3.5.2&3.5.7 of BESCOM SR 2023_24 | Supplying and fixing modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 c)6/16 Amps universel socket I-3.6.10 | Each | 259.6 | 259.6 | 6.0 | False | None | None | False | None | False | 1557.6 | 0 |
| 2956841 | 97745 | None | P_9 of 105,I No_3.5.2&3.5.7 of BESCOM SR 2023_24 | Supplying and fixing modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 d)600 watts Dimmer I-3.6.6 | Each | 361.9 | 361.9 | 12.0 | False | None | None | False | None | False | 4342.8 | 0 |
| 2956842 | 97745 | None | P_7 of 105,I No_5.18.6 of BESCOM SR 2023_24 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve indicator ON/OFF ,energy cross-3 with short circuit breaking capacity of 10 K and complete wiring as required conforming to IEC 60898 50-63 Amps DP | Each | 1212.2 | 1212.2 | 2.0 | False | None | None | False | None | False | 2424.4 | 0 |
| 2956843 | 97745 | None | P_54 of 105,I No_12.57of BESCOM SR 2023_24 | Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm alround with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts.(P- 54 of 105 , I No - 12.57of BESCOM SR 2023-24) | Nos | 4681.6 | 4681.6 | 2.0 | False | None | None | False | None | False | 9363.2 | 0 |
| 2956844 | 97745 | None | P_62 of 81,I No_92-14.04 of BESCOM SR23_24 | Supplying and fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers, 16 Amps(P-62 of 81 , I No- 92/14.04 of BESCOM SR 2023-24) | Nos | 151.8 | 151.8 | 2.0 | False | None | None | False | None | False | 303.6 | 0 |
| 2956845 | 97745 | None | P_43 of 105,I No_11.2.2 of BESCOM SR 2023_24) | Supplying and fixing retrofit PL-LED lamp.W LED Linear source with cct 6500 degree K ,CRI greater than 70% Effiency greater than80 lumen per watt life greater than25000 burning hours and complaiance to IS 10322 /IEC 60598 ,LM 79 &LM 80 .The LED are driven by HF electronic driver integrated in the system with PF greater than0.95,Power should less than 5% of lamp waltage short circuit and open circuit protection to be integrated in the circuit THD less than 20 % life as per LM 79 The operating input voltage should be between 130 to 275 volts Tested by NABL/CPBI accredited laboratory with 2 years warranty against manufacturing defect working under standard electrical, 18-20 Watts (P- 43 of 105 , I No - 11.20 of BESCOM SR 2023-24) | Nos | 772.2 | 772.2 | 10.0 | False | None | None | False | None | False | 7722.0 | 0 |
| 2956846 | 97745 | None | Page No_50,Item No_13.8.9 BWSSBSR 2023_24 | Supplying, installing, testing and commissioning of Submersible Pump ( 2 HP/1.5KW 25 STAGE) of adequate HP capable of giving required discharge at suitable head to work on 1 phase 50Hz 400/400 V with necessary unions, flanges, foundations bolts RCC footin | Each | 22237.6 | 22237.6 | 2.0 | False | None | None | False | None | False | 44475.2 | 0 |
| 2956847 | 97745 | None | Page No -123, Item No-13.33.6 P-DSR23-24 | 3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work | Mtr | 793.1 | 793.1 | 60.0 | False | None | None | False | None | False | 47586.0 | 0 |
| 2956848 | 97745 | None | Page No_07,Item No_1.10PWDSR 2023_24Vol_1 | Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 m. Including cost of all labour complete as per specifications | Cum | 176.0 | 176.0 | 26.99 | False | None | None | False | None | False | 4750.24 | 0 |
| 2956849 | 97745 | None | Page No_150,Item No_13.8.9BWSSB 2023_24 | Providing and fixing suitable for 1.1 KV class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc. with necessary materials and labour tools and equipments as per instructions of engineer incharge of work. 3.5X 6 Sqm | Mtr | 412.5 | 412.5 | 32.0 | False | None | None | False | None | False | 13200.0 | 0 |
| 2956850 | 97745 | None | item_NO_41 | BESCOM deposit Charges | Each | 10000.0 | 10000.0 | 2.0 | False | None | None | False | None | False | 20000.0 | 0 |