| 2793226 | 89522 | None | code01 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work | Cum | 105.06 | 105.06 | 15.72 | False | None | None | False | None | False | 1651.5432 | 0 |
| 2793227 | 89522 | None | code02 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thick ness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appur tenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)
Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates | Cum | 5833.92 | 5833.92 | 2.0 | False | None | None | False | None | False | 11667.84 | 0 |
| 2793228 | 89522 | None | code03 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) | Cum | 6580.67 | 6580.67 | 15.47 | False | None | None | False | None | False | 101802.9649 | 0 |
| 2793229 | 89522 | None | code04 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | Cum | 273.98 | 273.98 | 17.18 | False | None | None | False | None | False | 4706.9764 | 0 |
| 2793230 | 89522 | None | code05 | Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)
M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. | Cum | 6475.61 | 6475.61 | 10.91 | False | None | None | False | None | False | 70648.9051 | 0 |
| 2793231 | 89522 | None | code06 | Formwork for PLINTH BEAM
As per the Recommendation of Technical working group rates for formwork shall be added on percentage basis to the finished concrete item rate.
For Plinth beam works consider 50% of item concrete rate | Cum | 3143.5 | 3143.5 | 1.87 | False | None | None | False | None | False | 5878.345 | 0 |
| 2793232 | 89522 | None | code07 | Formwork for Roof beams
As per the Recommendation of Technical working group rates for formwork shall be added on percentage basis to the finished concrete item rate.
For Roof beam works consider 60% of item concrete rate | Cum | 3772.2 | 3772.2 | 1.94 | False | None | None | False | None | False | 7318.068 | 0 |
| 2793233 | 89522 | None | code08 | Formwork for Roof slab
As per the Recommendation of Technical working group rates for formwork shall be added on percentage basis to the finished concrete item rate.
For Roof slab works consider 50% of item concrete rate | Cum | 3143.5 | 3143.5 | 5.64 | False | None | None | False | None | False | 17729.34 | 0 |
| 2793234 | 89522 | None | code09 | Supplying, Fitting and Placing Thermo-Mechanically Treated bars of grade Fe-500 & above Reinforcement in Foundation / Substructure / Superstructure complete as per Drawing and Technical Specifications | Tonne | 92140.71 | 92140.71 | 0.57 | False | None | None | False | None | False | 52520.2047 | 0 |
| 2793235 | 89522 | None | code10 | BBM Providing Brick work with common burnt clay Non Modular bricksof class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. | Cum | 8466.6 | 8466.6 | 25.72 | False | None | None | False | None | False | 217760.952 | 0 |
| 2793236 | 89522 | None | code11 | Half brick masonry with Non Modular fly ash bricks of class designation 5.0, conforming to IS :12894, in super structure above plinth and upto floor I level cement mortar 1 : 4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. | Sqm | 989.83 | 989.83 | 43.41 | False | None | None | False | None | False | 42968.5203 | 0 |
| 2793237 | 89522 | None | code12 | plaster work Providing 12 mm cement plaster with cement mortar 1:4 (1 cement:4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding,including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 262.65 | 262.65 | 180.36 | False | None | None | False | None | False | 47371.554 | 0 |
| 2793238 | 89522 | None | code13 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life) | Sqm | 162.74 | 162.74 | 180.36 | False | None | None | False | None | False | 29351.7864 | 0 |
| 2793239 | 89522 | None | code14 | Flooring work Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm | Sqm | 1179.35 | 1179.35 | 42.45 | False | None | None | False | None | False | 50063.4075 | 0 |
| 2793240 | 89522 | None | code15 | dadoing work Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement
slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. | Sqm | 1492.47 | 1492.47 | 113.35 | False | None | None | False | None | False | 169171.4745 | 0 |
| 2793241 | 89522 | None | code16 | Ventilators Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with
approved steel primer all complete. Fixed to steel windows by welding | Kgs | 173.04 | 173.04 | 24.0 | False | None | None | False | None | False | 4152.96 | 0 |
| 2793242 | 89522 | None | code17 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket
etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/ m²) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. | Sqm | 1017.64 | 1017.64 | 2.4 | False | None | None | False | None | False | 2442.336 | 0 |
| 2793243 | 89522 | None | code18 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts bolts, fasteners etc.) including cost of materials, labour, usage charges
of machinery complete as per specifications and as per directions of the Engineer-in-Charge. | Kgs | 581.95 | 581.95 | 93.6 | False | None | None | False | None | False | 54470.52 | 0 |
| 2793244 | 89522 | None | code19 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of
fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm
C.P. brass pillar taps | Each | 2951.98 | 2951.98 | 3.0 | False | None | None | False | None | False | 8855.94 | 0 |
| 2793245 | 89522 | None | code20 | Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. | m | 327.54 | 327.54 | 45.0 | False | None | None | False | None | False | 14739.3 | 0 |
| 2793246 | 89522 | None | code21 | Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges.-do- with one side prelam | Sqm | 2101.2 | 2101.2 | 6.3 | False | None | None | False | None | False | 13237.56 | 0 |
| 2793247 | 89522 | None | code22 | Flush Mounting Wooden Box Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete. 8" x 6" x 3" (203 x 152 x 76 mm) (P.no.3.it.no.1.6.4) | Each | 86.0 | 86.0 | 4.0 | False | None | None | False | None | False | 344.0 | 0 |
| 2793248 | 89522 | None | code23 | Wiring for Lightings/Power Circuit Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.1.5 Sqmm (P.no.5.it.no.2.3.2) (PWD CSR for Electrical Works for the Year 2023-24) | m | 26.0 | 26.0 | 50.0 | False | None | None | False | None | False | 1300.0 | 0 |
| 2793249 | 89522 | None | code24 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.2.5 Sqmm (P.no.5.it.no.2.3.3) (PWD CSR for Electrical Works for the Year 2023-24) | m | 42.0 | 42.0 | 50.0 | False | None | None | False | None | False | 2100.0 | 0 |
| 2793250 | 89522 | None | code25 | Concealed PVC Conduit System Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. 19/20 mm dia 2mm thick | m | 69.0 | 69.0 | 20.0 | False | None | None | False | None | False | 1380.0 | 0 |
| 2793251 | 89522 | None | code26 | PVC/metal conduit Deep Junction Box Supplying and fixing PVC/metal conduit Deep junction box 19/20mm Deep Junction Box | Each | 49.0 | 49.0 | 6.0 | False | None | None | False | None | False | 294.0 | 0 |
| 2793252 | 89522 | None | code27 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Two Way Switch | Each | 322.39 | 322.39 | 4.0 | False | None | None | False | None | False | 1289.56 | 0 |
| 2793253 | 89522 | None | code28 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Three Way socket | Each | 170.98 | 170.98 | 4.0 | False | None | None | False | None | False | 683.92 | 0 |
| 2793254 | 89522 | None | code29 | 4mm Thick Plastic Sheets Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc, and fixing on existing wooden or metal box using N.F. screws. (P.no.9.it.no.3.8) (PWD CSR for Electrical Works for the Year 2023-24) | Sqm | 0.42 | 0.42 | 1200.0 | False | None | None | False | None | False | 504.0 | 0 |
| 2793255 | 89522 | None | code30 | Supplying of feet PVC Batten with integrated LED tube W with high quality diffuse with Life of 25000 burning hours & 70% lumen maintenance with CR I 80 Power Input: 220-240 V@ 50/60 Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 4' - 20/22 W | Each | 710.7 | 710.7 | 4.0 | False | None | None | False | None | False | 2842.8 | 0 |
| 2793256 | 89522 | None | code31 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. PWD CSR 2023-24, Vol-II, P. No. 123, I. No. 13.34 | Nos | 9.27 | 9.27 | 1000.0 | False | None | None | False | None | False | 9270.0 | 0 |
| 2793257 | 89522 | None | code32 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid | Each | 6156.31 | 6156.31 | 5.0 | False | None | None | False | None | False | 30781.55 | 0 |
| 2793258 | 89522 | None | code33 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mmsizes respectively with automatic flushing cistern with standard flushpipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern | Each | 4587.62 | 4587.62 | 2.0 | False | None | None | False | None | False | 9175.24 | 0 |
| 2793259 | 89522 | None | code34 | Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete | Each | 226.6 | 226.6 | 7.0 | False | None | None | False | None | False | 1586.2 | 0 |
| 2793260 | 89522 | None | code35 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm (PWD CSR 2023-24, Vol-II, P. No. 136, I. No. 14.32.4) | Each | 1777.78 | 1777.78 | 3.0 | False | None | None | False | None | False | 5333.34 | 0 |
| 2793261 | 89522 | None | code36 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. | Each | 280.16 | 280.16 | 5.0 | False | None | None | False | None | False | 1400.8 | 0 |
| 2793262 | 89522 | None | code37 | Providing and fixing Bib cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete Economy Class | Each | 1150.51 | 1150.51 | 8.0 | False | None | None | False | None | False | 9204.08 | 0 |
| 2793263 | 89522 | None | code38 | Providing and fixing Towel rail 600mm length made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete Economy | Each | 1299.86 | 1299.86 | 3.0 | False | None | None | False | None | False | 3899.58 | 0 |
| 2793264 | 89522 | None | code39 | Providing and fixing Toilet paper holder made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class a Economy | Each | 864.17 | 864.17 | 3.0 | False | None | None | False | None | False | 2592.51 | 0 |
| 2793265 | 89522 | None | code40 | Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS 13592 type A, including jointing with seal ring conforming to IS 5382, leaving 10mm gap for thermal expansion, (i) single socketed pipes 100 mm diameter | m | 299.73 | 299.73 | 12.0 | False | None | None | False | None | False | 3596.76 | 0 |
| 2793266 | 89522 | None | code41 | Supplyingexhaustfanof1440RPMof300mm(12")sizewithbracketbladescompleteforlightdutysuitabletooperateon230V50Hz, AC Supply. (PWD CSR for Electrical Works for the Year 2023-24 P.no.30.it.no.6.1) | Nos | 1492.0 | 1492.0 | 2.0 | False | None | None | False | None | False | 2984.0 | 0 |
| 2793267 | 89522 | None | code42 | Porcelain Fuse Channel Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 32Amps (P.no.10.it.no.5.7.2) (PWD CSR for Electrical Works for the Year 2023-24) | Nos | 241.0 | 241.0 | 3.0 | False | None | None | False | None | False | 723.0 | 0 |
| 2793268 | 89522 | None | code43 | Miniature Circuit Breakers Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32 Amps SP | Nos | 415.0 | 415.0 | 2.0 | False | None | None | False | None | False | 830.0 | 0 |
| 2793269 | 89522 | None | code44 | Miniature Circuit Breakers Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32 Amps DP .(p.no.17.it.no.5.18.4) (PWD CSR for Electrical Works for the Year 2023-24) | Nos | 739.0 | 739.0 | 1.0 | False | None | None | False | None | False | 739.0 | 0 |
| 2793270 | 89522 | None | code45 | MCB Distribution Boards Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS enclosure.I - Single Door 8 Way SP & N (p.no.18.it.no.5.19.3)(PWD CSR for Electrical Works for the Year 2023-24) | Nos | 1492.0 | 1492.0 | 2.0 | False | None | None | False | None | False | 2984.0 | 0 |
| 2793271 | 89522 | None | code46 | Supplying,fixing,wiring,earthelectrodeforgroundingconduits,I.C.cutoutsandotherequipment'sonthemeterboardusing40mmdia2.90mmthickGIpipe2.5mlongburiedinapit.Thepitshouldbefilledwithequalproportionofsaltandcharcoal150mmall-roundthepipetocompletedepth.Theconnectionfromthepipetotheconduitetc.,istobeestablishedthroughGIwireofsizeasperlSIspecification7.3.3.ofIS732using12mmdiabolts,nuts,washersandchecknutsetc., the pipe shall have 16 through holes of 12 mm dia . (PWD CSR for Electrical Works for the Year 2023-24 P.no.54.it.no.12.56) | Nos | 3510.0 | 3510.0 | 1.0 | False | None | None | False | None | False | 3510.0 | 0 |