| 2970901 | 98393 | None | 001 | Earth work in surface excavation for stripping, seating of bund, Road way, by manual means for lowering & leveling the ground for all works other than foundation & depth in all kinds of soil not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work. | Sqm | 73.5 | 73.5 | 400.0 | False | None | None | False | None | False | 29400.0 | 0 |
| 2970902 | 98393 | None | 002 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work (In all kinds of soils Depth upto 3 m) | Cum | 76.65 | 76.65 | 189.69 | False | None | None | False | None | False | 14539.7385 | 0 |
| 2970903 | 98393 | None | 003 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | Cum | 214.2 | 214.2 | 111.86 | False | None | None | False | None | False | 23960.412 | 0 |
| 2970904 | 98393 | None | 004 | Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour, rolling, water,all materials,usage& all other appurtenaces required to complete the work | Cum | 422.1 | 422.1 | 227.43 | False | None | None | False | None | False | 95998.203 | 0 |
| 2970905 | 98393 | None | 005 | Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with
Cement mortar 1:6 (1 cement : 6 coarse sand) | Cum | 4945.5 | 4945.5 | 30.76 | False | None | None | False | None | False | 152123.58 | 0 |
| 2970906 | 98393 | None | 006 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) | Cum | 5580.75 | 5580.75 | 28.2 | False | None | None | False | None | False | 157377.15 | 0 |
| 2970907 | 98393 | None | 007 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately).Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates | Cum | 5903.1 | 5903.1 | 39.41 | False | None | None | False | None | False | 232641.171 | 0 |
| 2970908 | 98393 | None | 008 | Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. | Cum | 6120.45 | 6120.45 | 63.05 | False | None | None | False | None | False | 385894.3725 | 0 |
| 2970909 | 98393 | None | 009 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications . (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregate | Cum | 6323.1 | 6323.1 | 97.42 | False | None | None | False | None | False | 615996.402 | 0 |
| 2970910 | 98393 | None | 010 | Providing centering,shuttering,formwork,scaffolding,etc, Finished rate of concrete work iof building (V-1, Pg. No:115 ) Corrigendum-3 issue Rates for the year 2022-23 : Page No : 02 for Sub structure | Cum | 489.64 | 489.64 | 33.25 | False | None | None | False | None | False | 16280.53 | 0 |
| 2970911 | 98393 | None | 011 | Providing centering,shuttering,formwork,scaffolding,etc, Finished rate of concrete work iof building (V-1, Pg. No:115 ) Corrigendum-3 issue Rates for the year 2022-23 : Page No : 02 for Plinth Beam | Cum | 3060.23 | 3060.23 | 24.63 | False | None | None | False | None | False | 75373.4649 | 0 |
| 2970912 | 98393 | None | 012 | Providing centering,shuttering,formwork,scaffolding,etc, Finished rate of concrete work iof building (V-1, Pg. No:115 ) Corrigendum-3 issue Rates for the year 2022-23 : Page No : 02 for Neck Column | Cum | 4284.32 | 4284.32 | 5.17 | False | None | None | False | None | False | 22149.9344 | 0 |
| 2970913 | 98393 | None | 013 | Providing centering,shuttering,formwork,scaffolding,etc, Finished rate of concrete work iof building (V-1, Pg. No:115 ) Corrigendum-3 issue Rates for the year 2022-23 : Page No : 02 for Super structure Columns | Cum | 4426.17 | 4426.17 | 10.22 | False | None | None | False | None | False | 45235.4574 | 0 |
| 2970914 | 98393 | None | 014 | Providing centering,shuttering,formwork,scaffolding,etc, Finished rate of concrete work iof building (V-1, Pg. No:115 ) Corrigendum-3 issue Rates for the year 2022-23 : Page No : 02 for Beam | Cum | 3793.86 | 3793.86 | 15.92 | False | None | None | False | None | False | 60398.2512 | 0 |
| 2970915 | 98393 | None | 015 | Providing centering,shuttering,formwork,scaffolding,etc, Finished rate of concrete work iof building (V-1, Pg. No:115 ) Corrigendum-3 issue Rates for the year 2022-23 : Page No : 02 for Slabs & Staircase | Cum | 3161.55 | 3161.55 | 64.69 | False | None | None | False | None | False | 204520.6695 | 0 |
| 2970916 | 98393 | None | 016 | Providing centering,shuttering,formwork,scaffolding,etc, Finished rate of concrete work iof building (V-1, Pg. No:115 ) Corrigendum-3 issue Rates for the year 2022-23 : Page No : 02 for Lintel | Cum | 3793.0 | 3793.0 | 5.39 | False | None | None | False | None | False | 20444.27 | 0 |
| 2970917 | 98393 | None | 017 | Providing centering,shuttering,formwork,scaffolding,etc, Finished rate of concrete work iof building (V-1, Pg. No:115 ) Corrigendum-3 issue Rates for the year 2022-23 : Page No : 02 for Chajja | Cum | 2845.4 | 2845.4 | 1.22 | False | None | None | False | None | False | 3471.388 | 0 |
| 2970918 | 98393 | None | 018 | Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately ) | Kg | 94.5 | 94.5 | 17243.61 | False | None | None | False | None | False | 1629521.145 | 0 |
| 2970919 | 98393 | None | 019 | Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cement mortar 1:6 (1 cement : 6 coarse sand) With modular bricks including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work | Cum | 10006.5 | 10006.5 | 82.66 | False | None | None | False | None | False | 827137.29 | 0 |
| 2970920 | 98393 | None | 020 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge | Sqm | 256.2 | 256.2 | 614.57 | False | None | None | False | None | False | 157452.834 | 0 |
| 2970921 | 98393 | None | 021 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 309.75 | 309.75 | 537.14 | False | None | None | False | None | False | 166379.115 | 0 |
| 2970922 | 98393 | None | 022 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge | Sqm | 87.15 | 87.15 | 678.17 | False | None | None | False | None | False | 59102.5155 | 0 |
| 2970923 | 98393 | None | 023 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm | Sqm | 1135.05 | 1135.05 | 98.4 | False | None | None | False | None | False | 111688.92 | 0 |
| 2970924 | 98393 | None | 024 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser, treads of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints as per direction of Engineer in charge | Sqm | 1294.65 | 1294.65 | 6.65 | False | None | None | False | None | False | 8609.4225 | 0 |
| 2970925 | 98393 | None | 025 | Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab , including cost of materials, labour, curing, polishing complete as per specifications. | Sqm | 1289.4 | 1289.4 | 291.61 | False | None | None | False | None | False | 376001.934 | 0 |
| 2970926 | 98393 | None | 026 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete | Sqm | 793.8 | 793.8 | 19.905 | False | None | None | False | None | False | 15800.589 | 0 |
| 2970927 | 98393 | None | 027 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 1006.95 | 1006.95 | 79.968 | False | None | None | False | None | False | 80523.7776 | 0 |
| 2970928 | 98393 | None | 028 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 117.6 | 117.6 | 936.44 | False | None | None | False | None | False | 110125.344 | 0 |
| 2970929 | 98393 | None | 029 | Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 218.4 | 218.4 | 627.82 | False | None | None | False | None | False | 137115.888 | 0 |
| 2970930 | 98393 | None | 030 | Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications | Cum | 79111.2 | 79111.2 | 1.23 | False | None | None | False | None | False | 97306.776 | 0 |
| 2970931 | 98393 | None | 031 | Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. | No | 1550.85 | 1550.85 | 16.0 | False | None | None | False | None | False | 24813.6 | 0 |
| 2970932 | 98393 | None | 032 | Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures) | Sqm | 4783.8 | 4783.8 | 36.06 | False | None | None | False | None | False | 172503.828 | 0 |
| 2970933 | 98393 | None | 033 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding. | Kg | 150.15 | 150.15 | 1174.64 | False | None | None | False | None | False | 176372.196 | 0 |
| 2970934 | 98393 | None | 034 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval ofEngineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. | Kg | 525.0 | 525.0 | 188.1 | False | None | None | False | None | False | 98752.5 | 0 |
| 2970935 | 98393 | None | 035 | Providing & fixing of 3 track x 2 panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&Ps shall not be made) | Sqm | 7602.0 | 7602.0 | 37.8 | False | None | None | False | None | False | 287355.6 | 0 |
| 2970936 | 98393 | None | 036 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 111.3 | 111.3 | 61.53 | False | None | None | False | None | False | 6848.289 | 0 |
| 2970937 | 98393 | None | 037 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 110.25 | 110.25 | 66.78 | False | None | None | False | None | False | 7362.495 | 0 |
| 2970938 | 98393 | None | 038 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications . (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregate | Cum | 6386.33 | 6386.33 | 103.18 | False | None | None | False | None | False | 658941.5294 | 0 |
| 2970939 | 98393 | None | 039 | Providing centering,shuttering,formwork,scaffolding,etc, Finished rate of concrete work iof building (V-1, Pg. No:115 ) Corrigendum-3 issue Rates for the year 2022-23 : Page No : 02 for Columns | Cum | 4470.43 | 4470.43 | 11.45 | False | None | None | False | None | False | 51186.4235 | 0 |
| 2970940 | 98393 | None | 040 | Providing centering,shuttering,formwork,scaffolding,etc, Finished rate of concrete work iof building (V-1, Pg. No:115 ) Corrigendum-3 issue Rates for the year 2022-23 : Page No : 02 for Beam | Cum | 3831.8 | 3831.8 | 17.22 | False | None | None | False | None | False | 65983.596 | 0 |
| 2970941 | 98393 | None | 041 | Providing centering,shuttering,formwork,scaffolding,etc, Finished rate of concrete work iof building (V-1, Pg. No:115 ) Corrigendum-3 issue Rates for the year 2022-23 : Page No : 02 for Slabs & Staircase | Cum | 3193.17 | 3193.17 | 67.71 | False | None | None | False | None | False | 216209.5407 | 0 |
| 2970942 | 98393 | None | 042 | Providing centering,shuttering,formwork,scaffolding,etc, Finished rate of concrete work iof building (V-1, Pg. No:115 ) Corrigendum-3 issue Rates for the year 2022-23 : Page No : 02 for Lintel | Cum | 3831.8 | 3831.8 | 5.58 | False | None | None | False | None | False | 21381.444 | 0 |
| 2970943 | 98393 | None | 043 | Providing centering,shuttering,formwork,scaffolding,etc, Finished rate of concrete work iof building (V-1, Pg. No:115 ) Corrigendum-3 issue Rates for the year 2022-23 : Page No : 02 for Chajja | Cum | 2873.85 | 2873.85 | 1.4 | False | None | None | False | None | False | 4023.39 | 0 |
| 2970944 | 98393 | None | 044 | Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately ) | Kg | 95.45 | 95.45 | 13986.0 | False | None | None | False | None | False | 1334963.7 | 0 |
| 2970945 | 98393 | None | 045 | Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 3.5 conforming to IS: 2222 in superstructure above plinth level in cement mortar 1:6 (1 cement : 6 coarse sand) With modular bricks including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work | Cum | 10106.57 | 10106.57 | 106.26 | False | None | None | False | None | False | 1073924.1282 | 0 |
| 2970946 | 98393 | None | 046 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge | Sqm | 258.76 | 258.76 | 488.53 | False | None | None | False | None | False | 126412.0228 | 0 |
| 2970947 | 98393 | None | 047 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 312.85 | 312.85 | 821.61 | False | None | None | False | None | False | 257040.6885 | 0 |
| 2970948 | 98393 | None | 048 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge | Sqm | 88.02 | 88.02 | 725.28 | False | None | None | False | None | False | 63839.1456 | 0 |
| 2970949 | 98393 | None | 049 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm | Sqm | 1146.4 | 1146.4 | 74.4 | False | None | None | False | None | False | 85292.16 | 0 |
| 2970950 | 98393 | None | 050 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser, treads of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints as per direction of Engineer in charge | Sqm | 1307.6 | 1307.6 | 4.6 | False | None | None | False | None | False | 6014.96 | 0 |
| 2970951 | 98393 | None | 051 | Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab , including cost of materials, labour, curing, polishing complete as per specifications. | Sqm | 1302.29 | 1302.29 | 319.47 | False | None | None | False | None | False | 416042.5863 | 0 |
| 2970952 | 98393 | None | 052 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 118.78 | 118.78 | 725.28 | False | None | None | False | None | False | 86148.7584 | 0 |
| 2970953 | 98393 | None | 053 | Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 220.58 | 220.58 | 899.42 | False | None | None | False | None | False | 198394.0636 | 0 |
| 2970954 | 98393 | None | 054 | Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications | Cum | 79902.31 | 79902.31 | 0.88 | False | None | None | False | None | False | 70314.0328 | 0 |
| 2970955 | 98393 | None | 055 | Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. | No | 1566.36 | 1566.36 | 10.0 | False | None | None | False | None | False | 15663.6 | 0 |
| 2970956 | 98393 | None | 056 | Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures) | Sqm | 4831.64 | 4831.64 | 27.22 | False | None | None | False | None | False | 131517.2408 | 0 |
| 2970957 | 98393 | None | 057 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding. | Kg | 151.65 | 151.65 | 1277.33 | False | None | None | False | None | False | 193707.0945 | 0 |
| 2970958 | 98393 | None | 058 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval ofEngineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. | Kg | 530.25 | 530.25 | 99.0 | False | None | None | False | None | False | 52494.75 | 0 |
| 2970959 | 98393 | None | 059 | Providing & fixing of 3 track x 2 panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&Ps shall not be made) | Sqm | 7678.02 | 7678.02 | 43.2 | False | None | None | False | None | False | 331690.464 | 0 |
| 2970960 | 98393 | None | 060 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 112.41 | 112.41 | 65.04 | False | None | None | False | None | False | 7311.1464 | 0 |
| 2970961 | 98393 | None | 061 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 111.35 | 111.35 | 50.4 | False | None | None | False | None | False | 5612.04 | 0 |
| 2970962 | 98393 | None | 062 | Concealed Conduit System Supplying heavy gauge PVC conduit pipe ……mm dia .......mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary (Elec SR -2022-23) | Mtr | 70.0 | 70.0 | 810.0 | False | None | None | False | None | False | 56700.0 | 0 |
| 2970963 | 98393 | None | 063 | Supplying heavy gauge PVC Conduit Pipe ….dia .......mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.
(Elec SR -2022-23) | Mtr | 80.0 | 80.0 | 550.0 | False | None | None | False | None | False | 44000.0 | 0 |
| 2970964 | 98393 | None | 064 | Supplying and fixing PVC/metal conduit Deep junction box (Elec SR -2022-23) | Each | 51.0 | 51.0 | 135.0 | False | None | None | False | None | False | 6885.0 | 0 |
| 2970965 | 98393 | None | 065 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall (Elec SR 2022-23) | Each | 250.0 | 250.0 | 40.0 | False | None | None | False | None | False | 10000.0 | 0 |
| 2970966 | 98393 | None | 066 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate withrequired nos. of machine screws, bolts nuts etc., complete onthe existing metal/PVC box (Elec SR -2022-23) | Each | 302.0 | 302.0 | 40.0 | False | None | None | False | None | False | 12080.0 | 0 |
| 2970967 | 98393 | None | 067 | Supplying And Fixing Metal Fan Box with Round Hook.. (Elec SR -2022-23) | No | 163.0 | 163.0 | 30.0 | False | None | None | False | None | False | 4890.0 | 0 |
| 2970968 | 98393 | None | 068 | Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP A (Elec SR -2022-23) | Point | 276.0 | 276.0 | 84.0 | False | None | None | False | None | False | 23184.0 | 0 |
| 2970969 | 98393 | None | 069 | Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP A. Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch (Elec SR -2022-23) | Point | 386.0 | 386.0 | 84.0 | False | None | None | False | None | False | 32424.0 | 0 |
| 2970970 | 98393 | None | 070 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP of GROUP -A. (Elec SR -2022-23) | Mtr | 69.0 | 69.0 | 4480.0 | False | None | None | False | None | False | 309120.0 | 0 |
| 2970971 | 98393 | None | 071 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP of GROUP -A.(Elec SR -2022-23) | Mtr | 88.0 | 88.0 | 560.0 | False | None | None | False | None | False | 49280.0 | 0 |
| 2970972 | 98393 | None | 072 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP of GROUP -A. (Elec SR -2022-23) | Mtr | 112.0 | 112.0 | 280.0 | False | None | None | False | None | False | 31360.0 | 0 |
| 2970973 | 98393 | None | 073 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP of GROUP -A. (Elec SR -2022-23) | Mtr | 158.0 | 158.0 | 25.0 | False | None | None | False | None | False | 3950.0 | 0 |
| 2970974 | 98393 | None | 074 | Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3654 ((Elec SR -2022-23) | Each | 143.0 | 143.0 | 45.0 | False | None | None | False | None | False | 6435.0 | 0 |
| 2970975 | 98393 | None | 075 | Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board. GROUP A
(Elec SR -2022-23) | Each | 121.0 | 121.0 | 45.0 | False | None | None | False | None | False | 5445.0 | 0 |
| 2970976 | 98393 | None | 076 | Supplying and mounting 2 Nos. of 2 way 6 amps flush type switches either surface/flush mounted on existing gang box or in 4mm thick plastic sheet and mounted on a flush mounted wooden box and wiring as per IS 1293 (Elec SR -2022-23) | Each | 162.0 | 162.0 | 6.0 | False | None | None | False | None | False | 972.0 | 0 |
| 2970977 | 98393 | None | 077 | Supply and fixing of Bakelite D.P/Socket/ switch with/without neon indicator over existing wood board or flush mounting in plastic plates/nitches as per IS 1293 and IS 3854 GROUP A(Elec SR -2022-23) (6A One Way Switchs) | Each | 88.0 | 88.0 | 220.0 | False | None | None | False | None | False | 19360.0 | 0 |
| 2970978 | 98393 | None | 078 | Supply and fixing of Bakelite D.P/Socket/ switch with/without neon indicator over existing wood board or flush mounting in plastic plates/nitches as per IS 1293 and IS 3854 GROUP A(Elec SR -2022-23) (6A Two Way Switchs) | Each | 152.0 | 152.0 | 10.0 | False | None | None | False | None | False | 1520.0 | 0 |
| 2970979 | 98393 | None | 079 | Supply and fixing of Bakelite D.P/Socket/ switch with/without neon indicator over existing wood board or flush mounting in plastic plates/nitches as per IS 1293 and IS 3854 GROUP A(Elec SR -2022-23) (Stepped Fan Regulator Two Modul) | Each | 313.0 | 313.0 | 30.0 | False | None | None | False | None | False | 9390.0 | 0 |
| 2970980 | 98393 | None | 080 | Supply and fixing of Bakelite D.P/Socket/ switch with/without neon indicator over existing wood board or flush mounting in plastic plates/nitches as per IS 1293 and IS 3854 GROUP A(Elec SR -2022-23) (400W Dimmer) | Each | 281.0 | 281.0 | 10.0 | False | None | None | False | None | False | 2810.0 | 0 |
| 2970981 | 98393 | None | 081 | Supply and fixing of Bakelite D.P/Socket/ switch with/without neon indicator over existing wood board or flush mounting in plastic plates/nitches as per IS 1293 and IS 3854 GROUP A(Elec SR -2022-23) (16A One Way Switch) | Each | 249.0 | 249.0 | 12.0 | False | None | None | False | None | False | 2988.0 | 0 |
| 2970982 | 98393 | None | 082 | Supply and fixing of Bakelite D.P/Socket/ switch with/without neon indicator over existing wood board or flush mounting in plastic plates/nitches as per IS 1293 and IS 3854 GROUP A(Elec SR -2022-23) (16A One Way Switch) | Each | 159.0 | 159.0 | 12.0 | False | None | None | False | None | False | 1908.0 | 0 |
| 2970983 | 98393 | None | 083 | Supply and fixing of Bakelite D.P/Socket/ switch with/without neon indicator over existing wood board or flush mounting in plastic plates/nitches as per IS 1293 and IS 3854 GROUP A(Elec SR -2022-23) (32A DP Switch) | Each | 375.0 | 375.0 | 10.0 | False | None | None | False | None | False | 3750.0 | 0 |
| 2970984 | 98393 | None | 084 | Supply and fixing of Bakelite D.P/Socket/ switch with/without neon indicator over existing wood board or flush mounting in plastic plates/nitches as per IS 1293 and IS 3854 GROUP A(Elec SR -2022-23) (6/16A Universal Socket) | Each | 249.0 | 249.0 | 10.0 | False | None | None | False | None | False | 2490.0 | 0 |
| 2970985 | 98393 | None | 085 | Supply and fixing of Bakelite D.P/Socket/ switch with/without neon indicator over existing wood board or flush mounting in plastic plates/nitches as per IS 1293 and IS 3854 GROUP A(Elec SR -2022-23) (TV/Telephone Socket) | Each | 147.0 | 147.0 | 11.0 | False | None | None | False | None | False | 1617.0 | 0 |
| 2970986 | 98393 | None | 086 | Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. 48" Sweep (1200mm) (Elec SR -2022-23) | Each | 2085.0 | 2085.0 | 30.0 | False | None | None | False | None | False | 62550.0 | 0 |
| 2970987 | 98393 | None | 087 | Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coatedpainting Made out of 14 SWG MS enclosure. (Elec SR -2022-23) | Each | 3735.0 | 3735.0 | 12.0 | False | None | None | False | None | False | 44820.0 | 0 |
| 2970988 | 98393 | None | 088 | integrated in the system, with PF 0.95, power loss should 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.(Elec SR -2022-23) | No | 436.0 | 436.0 | 74.0 | False | None | None | False | None | False | 32264.0 | 0 |
| 2970989 | 98393 | None | 089 | Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure..(Elec SR -2022-23) | No | 1302.0 | 1302.0 | 12.0 | False | None | None | False | None | False | 15624.0 | 0 |
| 2970990 | 98393 | None | 090 | Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board.
.(Elec SR -2022-23) | No | 5472.0 | 5472.0 | 2.0 | False | None | None | False | None | False | 10944.0 | 0 |
| 2970991 | 98393 | None | 091 | Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete(Elec SR -2022-23) | Mtr | 3078.0 | 3078.0 | 1.0 | False | None | None | False | None | False | 3078.0 | 0 |
| 2970992 | 98393 | None | 092 | Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy
(Elec SR -2022-23) | No | 8370.0 | 8370.0 | 1.0 | False | None | None | False | None | False | 8370.0 | 0 |
| 2970993 | 98393 | None | 093 | Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100V as per IS 694:2010 (Elec SR -2022-23) | Mtr | 441.0 | 441.0 | 100.0 | False | None | None | False | None | False | 44100.0 | 0 |
| 2970994 | 98393 | None | 094 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching,refilling & testing of joints complete as per directions of Engineer in Charge. External work 32mm nominal dia pipes | Mtr | 358.0 | 358.0 | 90.0 | False | None | None | False | None | False | 32220.0 | 0 |
| 2970995 | 98393 | None | 095 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching,refilling & testing of joints complete as per directions of Engineer in Charge. External work 25mm nominal dia pipes | Mtr | 299.0 | 299.0 | 60.0 | False | None | None | False | None | False | 17940.0 | 0 |
| 2970996 | 98393 | None | 096 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS 8931 | No | 432.0 | 432.0 | 25.0 | False | None | None | False | None | False | 10800.0 | 0 |
| 2970997 | 98393 | None | 097 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS 8931. | No | 577.0 | 577.0 | 25.0 | False | None | None | False | None | False | 14425.0 | 0 |
| 2970998 | 98393 | None | 098 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :25 mm nominal bore | No | 384.0 | 384.0 | 3.0 | False | None | None | False | None | False | 1152.0 | 0 |
| 2970999 | 98393 | None | 099 | Providing and fixing gun metal non- return valve of approved quality (screwed end) :32 mm nominal bore Horizontal | No | 644.0 | 644.0 | 2.0 | False | None | None | False | None | False | 1288.0 | 0 |
| 2971000 | 98393 | None | 100 | Providing and fixing gun metal non- return valve of approved quality (screwed end) :32 mm nominal bore Horizontal | No | 735.0 | 735.0 | 2.0 | False | None | None | False | None | False | 1470.0 | 0 |
| 2971001 | 98393 | None | 101 | Providing and fixing gun metal non- return valve of approved quality (screwed end) :32 mm nominal bore Vertical | No | 111.0 | 111.0 | 10.0 | False | None | None | False | None | False | 1110.0 | 0 |
| 2971002 | 98393 | None | 102 | Providing and fixing unplasticised PVC connection pipe with brass unions :30 cm length 15 mm nominal bore | Ltr | 8.0 | 8.0 | 2000.0 | False | None | None | False | None | False | 16000.0 | 0 |
| 2971003 | 98393 | None | 103 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: | No | 4246.0 | 4246.0 | 4.0 | False | None | None | False | None | False | 16984.0 | 0 |
| 2971004 | 98393 | None | 104 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid | No | 4026.0 | 4026.0 | 2.0 | False | None | None | False | None | False | 8052.0 | 0 |
| 2971005 | 98393 | None | 105 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required
Single half stall urinal with 5 litre P.V.C. automatic flushing cistern | No | 6628.0 | 6628.0 | 3.0 | False | None | None | False | None | False | 19884.0 | 0 |
| 2971006 | 98393 | None | 106 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: using White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer | No | 3599.0 | 3599.0 | 2.0 | False | None | None | False | None | False | 7198.0 | 0 |
| 2971007 | 98393 | None | 107 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Flexible pipe 32 mm dia | No | 218.0 | 218.0 | 3.0 | False | None | None | False | None | False | 654.0 | 0 |
| 2971008 | 98393 | None | 108 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Oval shape 450x350 mm (outer dimensions) | No | 868.0 | 868.0 | 3.0 | False | None | None | False | None | False | 2604.0 | 0 |
| 2971009 | 98393 | None | 109 | Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete. 6 Kg/m2: 63mm(weight of pipe -0.662 kg) | Mtr | 153.0 | 153.0 | 71.0 | False | None | None | False | None | False | 10863.0 | 0 |
| 2971010 | 98393 | None | 110 | Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete. 6 Kg/m2: 75mm(weight of pipe -0.917 kg) | Mtr | 210.0 | 210.0 | 70.0 | False | None | None | False | None | False | 14700.0 | 0 |
| 2971011 | 98393 | None | 111 | Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete. 6 Kg/m2:110mm(weight of pipe -1.894 kg) | Mtr | 394.0 | 394.0 | 70.0 | False | None | None | False | None | False | 27580.0 | 0 |
| 2971012 | 98393 | None | 112 | Supplying, lowering, laying, jointing, testing and commissioning of Glazed Stone Ware Pipes of following dia, conforming to IS 651:1992, IS 4127 with latest amendments, including conveying to work site, caulking with hemp dipped in tar and jointing with CM 1:1.5 using OPC, perfect linking and curing for 10 days and testing with water etc. with all lead, lifts and as per Technical Specifications. The cost to include the cost of all jointing materials, necessary survey works for laying of sewer lines etc. complete. The contractor will make own arrangements for procuring water for testing.150 mm dia. pipes | Mtr | 466.0 | 466.0 | 40.0 | False | None | None | False | None | False | 18640.0 | 0 |
| 2971013 | 98393 | None | 113 | Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover. | No | 4977.0 | 4977.0 | 4.0 | False | None | None | False | None | False | 19908.0 | 0 |
| 2971014 | 98393 | None | 114 | Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. | Cum | 199.0 | 199.0 | 21.02 | False | None | None | False | None | False | 4182.98 | 0 |
| 2971015 | 98393 | None | 115 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | Cum | 214.2 | 214.2 | 21.02 | False | None | None | False | None | False | 4502.484 | 0 |
| 2971016 | 98393 | None | 116 | Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour, rolling, water,all materials,usage& all other appurtenaces required to complete the work | Cum | 422.1 | 422.1 | 6.75 | False | None | None | False | None | False | 2849.175 | 0 |
| 2971017 | 98393 | None | 117 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately).Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates | Cum | 5903.1 | 5903.1 | 1.75 | False | None | None | False | None | False | 10330.425 | 0 |
| 2971018 | 98393 | None | 118 | Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. | Cum | 6120.45 | 6120.45 | 1.75 | False | None | None | False | None | False | 10710.7875 | 0 |
| 2971019 | 98393 | None | 119 | Providing centering,shuttering,formwork,scaffolding,etc, Finished rate of concrete work iof building (V-1, Pg. No:115 ) Corrigendum-3 issue Rates for the year 2022-23 : Page No : 02 | Cum | 3060.23 | 3060.23 | 1.75 | False | None | None | False | None | False | 5355.4025 | 0 |
| 2971020 | 98393 | None | 120 | Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately ) | Kg | 94.5 | 94.5 | 175.18 | False | None | None | False | None | False | 16554.51 | 0 |
| 2971021 | 98393 | None | 121 | Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work | Cum | 7755.3 | 7755.3 | 5.38 | False | None | None | False | None | False | 41723.514 | 0 |
| 2971022 | 98393 | None | 122 | Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 379.05 | 379.05 | 73.6 | False | None | None | False | None | False | 27898.08 | 0 |
| 2971023 | 98393 | None | 123 | Supplying, lowering, laying, jointing, testing and commissioning of Glazed Stone Ware Pipes of following dia, conforming to IS 651:1992, IS 4127 with latest amendments, including conveying to work site, caulking with hemp dipped in tar and jointing with CM 1:1.5 using OPC, perfect linking and curing for 10 days and testing with water etc. with all lead, lifts and as per Technical Specifications. The cost to include the cost of all jointing materials, necessary survey works for laying of sewer lines etc. complete. The contractor will make own arrangements for procuring water for testing.150 mm dia. pipes | Mtr | 466.0 | 466.0 | 15.0 | False | None | None | False | None | False | 6990.0 | 0 |
| 2971024 | 98393 | None | 124 | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) 0 to 50 m | Mtr | 290.0 | 290.0 | 50.0 | False | None | None | False | None | False | 14500.0 | 0 |
| 2971025 | 98393 | None | 125 | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) 50 to 100 m | Mtr | 364.0 | 364.0 | 50.0 | False | None | None | False | None | False | 18200.0 | 0 |
| 2971026 | 98393 | None | 126 | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) 100 to 150 m | Mtr | 387.0 | 387.0 | 50.0 | False | None | None | False | None | False | 19350.0 | 0 |
| 2971027 | 98393 | None | 127 | Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, material and conforming to IS 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both ends.threaded conforming to IS 554-1985 one end fixed with socket conforming to IS 4270-2001 and the other end with screwed pipes all shall be responsibaly free from defects. The tubes shall be responsible straight end should be with ISI marking weighing 25.10kg/m.prices include Collar-Medium duty.mplete. The cost excludes the cost of casing pipes, collars and caps etc.) for: | Mtr | 1933.0 | 1933.0 | 15.0 | False | None | None | False | None | False | 28995.0 | 0 |
| 2971028 | 98393 | None | 128 | Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete | Mtr | 547.0 | 547.0 | 135.0 | False | None | None | False | None | False | 73845.0 | 0 |
| 2971029 | 98393 | None | 129 | Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per necessary ammendments and instructions of engineer incharge of work. For 3 HP | No | 31451.0 | 31451.0 | 1.0 | False | None | None | False | None | False | 31451.0 | 0 |
| 2971030 | 98393 | None | 130 | Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc.Note: Upto 110mm dia Coil shall be used. For Grade PE80 PN6.0 : HDPE Grade PE80-PN6.0, 63mm dia | Mtr | 143.0 | 143.0 | 150.0 | False | None | None | False | None | False | 21450.0 | 0 |
| 2971031 | 98393 | None | 131 | Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments | No | 1550.0 | 1550.0 | 1.0 | False | None | None | False | None | False | 1550.0 | 0 |
| 2971032 | 98393 | None | 132 | Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor type NOTE: 1) DOL Direct Online Starter 2) S-D- Star Delta Starte | Each | 9500.0 | 9500.0 | 1.0 | False | None | None | False | None | False | 9500.0 | 0 |
| 2971033 | 98393 | None | 133 | Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at the location of respective pump sets. | Each | 550.0 | 550.0 | 1.0 | False | None | None | False | None | False | 550.0 | 0 |
| 2971034 | 98393 | None | 134 | Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/25/40 Amps with scalable box. | Each | 1250.0 | 1250.0 | 1.0 | False | None | None | False | None | False | 1250.0 | 0 |
| 2971035 | 98393 | None | 135 | Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to13:8130-1984 and virgin grade PVC insulation and powder coating extruded PVC sheathed suitable for working voltageupto 1100 V as per IS-694:2010. | Mtr | 242.0 | 242.0 | 205.0 | False | None | None | False | None | False | 49610.0 | 0 |