| 2906913 | 95455 | None | 001 | Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work.
| Cum | 240.45 | 240.45 | 130.15 | False | None | None | False | None | False | 31294.5675 | 0 |
| 2906914 | 95455 | None | 002 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications (The cost of steel reinforcement & formwork shall be paid separately)Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse
| Cum | 5466.3 | 5466.3 | 24.19 | False | None | None | False | None | False | 132229.797 | 0 |
| 2906915 | 95455 | None | 003 | Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregate Footing
| Cum | 6676.56 | 6676.56 | 15.55 | False | None | None | False | None | False | 103820.508 | 0 |
| 2906916 | 95455 | None | 003A | Circular Columns
| Cum | 10818.5 | 10818.5 | 10.76 | False | None | None | False | None | False | 116407.06 | 0 |
| 2906917 | 95455 | None | 003B | Staircase Wall
| Cum | 9582.1 | 9582.1 | 7.53 | False | None | None | False | None | False | 72153.213 | 0 |
| 2906918 | 95455 | None | 003C | Steps
| Cum | 10200.3 | 10200.3 | 17.05 | False | None | None | False | None | False | 173915.115 | 0 |
| 2906919 | 95455 | None | 003D | Portico Slab
| Cum | 9582.1 | 9582.1 | 16.68 | False | None | None | False | None | False | 159829.428 | 0 |
| 2906920 | 95455 | None | 003E | Chajja
| Cum | 9273.0 | 9273.0 | 0.41 | False | None | None | False | None | False | 3801.93 | 0 |
| 2906921 | 95455 | None | 004 | Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand)
| Cum | 4987.5 | 4987.5 | 46.27 | False | None | None | False | None | False | 230771.625 | 0 |
| 2906922 | 95455 | None | 005 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
| Cum | 5619.6 | 5619.6 | 28.83 | False | None | None | False | None | False | 162013.068 | 0 |
| 2906923 | 95455 | None | 006 | Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work.
| Cum | 422.1 | 422.1 | 84.61 | False | None | None | False | None | False | 35713.881 | 0 |
| 2906924 | 95455 | None | 007 | Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately)
| Kg | 96.6 | 96.6 | 1375.81 | False | None | None | False | None | False | 132903.246 | 0 |
| 2906925 | 95455 | None | 007 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications (The cost of steel reinforcement & formwork shall be paid separately)Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates.
| Cum | 5466.3 | 5466.3 | 1.008 | False | None | None | False | None | False | 5510.0304 | 0 |
| 2906926 | 95455 | None | 008 | Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately)
| Kg | 96.6 | 96.6 | 3737.071 | False | None | None | False | None | False | 361001.0586 | 0 |
| 2906927 | 95455 | None | 009 | Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.
| Cum | 7295.4 | 7295.4 | 55.7119 | False | None | None | False | None | False | 406440.59526 | 0 |
| 2906928 | 95455 | None | 010 | Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications.
| Cum | 79111.2 | 79111.2 | 0.981 | False | None | None | False | None | False | 77608.0872 | 0 |
| 2906929 | 95455 | None | 011 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding
| Kg | 164.85 | 164.85 | 190.08 | False | None | None | False | None | False | 31334.688 | 0 |
| 2906930 | 95455 | None | 012 | Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and T- iron guide at the top and bottom respectively, including applying a priming coat of approved steel primer including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.
| Sqm | 4546.5 | 4546.5 | 4.62 | False | None | None | False | None | False | 21004.83 | 0 |
| 2906931 | 95455 | None | 013 | Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.
| No | 1559.25 | 1559.25 | 7.0 | False | None | None | False | None | False | 10914.75 | 0 |
| 2906932 | 95455 | None | 014 | Fixing of window frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debries with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.
| No | 1060.5 | 1060.5 | 6.0 | False | None | None | False | None | False | 6363.0 | 0 |
| 2906933 | 95455 | None | 015 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.
| Sqm | 338.1 | 338.1 | 661.8892 | False | None | None | False | None | False | 223784.73852 | 0 |
| 2906934 | 95455 | None | 016 | Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.
| Sqm | 207.9 | 207.9 | 102.5636 | False | None | None | False | None | False | 21322.97244 | 0 |
| 2906935 | 95455 | None | 016 | Flooring with 25mm thick polished shahabad slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing, polishing complete as per specifications.
| Sqm | 1377.6 | 1377.6 | 139.2496 | False | None | None | False | None | False | 191830.24896 | 0 |
| 2906936 | 95455 | None | 017 | Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures)
| Sqm | 4053.0 | 4053.0 | 17.64 | False | None | None | False | None | False | 71494.92 | 0 |
| 2906937 | 95455 | None | 017 | Providing and fixing in position Mathi / Nandi wood fully panelled shutters for windows with stiles and rails of 25mm. thick, 75mm wide in two halves with panels of 20mm thick including cost of materials, labour charges, usage charges complete as per specifications. (excluding cost of fixtures)
| Sqm | 4060.35 | 4060.35 | 8.64 | False | None | None | False | None | False | 35081.424 | 0 |
| 2906938 | 95455 | None | 018 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
| Sqm | 110.25 | 110.25 | 465.3596 | False | None | None | False | None | False | 51305.8959 | 0 |
| 2906939 | 95455 | None | 019 | Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
| Sqm | 142.8 | 142.8 | 313.6282 | False | None | None | False | None | False | 44786.10696 | 0 |
| 2906940 | 95455 | None | 020 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
| Sqm | 43.05 | 43.05 | 59.13 | False | None | None | False | None | False | 2545.5465 | 0 |
| 2906941 | 95455 | None | 021 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
| Sqm | 110.25 | 110.25 | 59.13 | False | None | None | False | None | False | 6519.0825 | 0 |
| 2906942 | 95455 | None | 022 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.
| Kg | 525.0 | 525.0 | 43.2 | False | None | None | False | None | False | 22680.0 | 0 |
| 2906943 | 95455 | None | 023 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
| Sqm | 111.3 | 111.3 | 29.835 | False | None | None | False | None | False | 3320.6355 | 0 |
| 2906944 | 95455 | None | 024 | Concealed Conduit System Supplying heavy gauge PVC conduit pipe ……mm dia .mm thick confirming to IS 2509 with suitable size bends,metal/PVC junction boxes, adhesive paste etc., and runningbefore concreting the slab. The conduit should be tied to thereinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered usingPVC end enclosures, run with 18SWG GI fish wire wherever necessary 25mm dia 2mm thick
| Mtr | 53.0 | 53.0 | 150.0 | False | None | None | False | None | False | 7950.0 | 0 |
| 2906945 | 95455 | None | 025 | Supplying heavy gauge PVC Conduit Pipe ….dia .mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracingU or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.25mm dia 2mm thick
| Mtr | 54.0 | 54.0 | 150.0 | False | None | None | False | None | False | 8100.0 | 0 |
| 2906946 | 95455 | None | 026 | Supplying and fixing PVC/metal conduit Deep junction box 25mm deep junction box
| Mtr | 47.0 | 47.0 | 2.0 | False | None | None | False | None | False | 94.0 | 0 |
| 2906947 | 95455 | None | 027 | Supplying and flush mounting teak wooden box without front plank, made of not less than 12mm thick wood, after due groove cutting, Finishing with necessary cement plastering complete 10"x7"x3" (254x178x76mm)
| Each | 77.0 | 77.0 | 3.0 | False | None | None | False | None | False | 231.0 | 0 |
| 2906948 | 95455 | None | 028 | Supplying And Fixing Metal Fan Box with Round Hook.
| No | 85.0 | 85.0 | 1.0 | False | None | None | False | None | False | 85.0 | 0 |
| 2906949 | 95455 | None | 029 | Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.Medium point above 3Mtr upto 6Mtr from tapping point to outlet via switch
| Point | 275.0 | 275.0 | 1.0 | False | None | None | False | None | False | 275.0 | 0 |
| 2906950 | 95455 | None | 030 | Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.Long point above 6Mtr upto 10Mtr from tapping point to outlet via switch
| Point | 400.0 | 400.0 | 1.0 | False | None | None | False | None | False | 400.0 | 0 |
| 2906951 | 95455 | None | 031 | Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation sheathed suitabl 3C X 1.5Sq.mm
| Mtr | 55.0 | 55.0 | 120.0 | False | None | None | False | None | False | 6600.0 | 0 |
| 2906952 | 95455 | None | 032 | Supplying and drawing Flexible Multicore Cable
manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation sheathed suitabl 4C X 1.5Sq.mm | Mtr | 65.0 | 65.0 | 120.0 | False | None | None | False | None | False | 7800.0 | 0 |
| 2906953 | 95455 | None | 033 | Supplying and drawing Flexible Multicore Cable
manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation sheathed suitabl 6C X 1.5Sq.mm
| Mtr | 130.0 | 130.0 | 130.0 | False | None | None | False | None | False | 16900.0 | 0 |
| 2906954 | 95455 | None | 034 | Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3654 6Amps 2 Way
| Each | 112.0 | 112.0 | 2.0 | False | None | None | False | None | False | 224.0 | 0 |
| 2906955 | 95455 | None | 035 | Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board.6Amps 2way Switch
| No | 55.0 | 55.0 | 2.0 | False | None | None | False | None | False | 110.0 | 0 |
| 2906956 | 95455 | None | 036 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.1 to 3 Module
| Each | 110.0 | 110.0 | 2.0 | False | None | None | False | None | False | 220.0 | 0 |
| 2906957 | 95455 | None | 037 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.6 Module
| Each | 175.0 | 175.0 | 20.0 | False | None | None | False | None | False | 3500.0 | 0 |
| 2906958 | 95455 | None | 038 | Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N.F. screws.
| Sq CM | 0.24 | 0.24 | 50000.0 | False | None | None | False | None | False | 12000.0 | 0 |
| 2906959 | 95455 | None | 039 | Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system.
| Each | 2127.0 | 2127.0 | 4.0 | False | None | None | False | None | False | 8508.0 | 0 |
| 2906960 | 95455 | None | 040 | Fixing all types and all capacities of fluorescent / false ceiling/ spot light / CFL / LED fittings indoor on the wall / ceiling /rafters / girders using 23/0.0076” twin twisted PVC insulatedwires, required Nos of round blocks and clamps.
| Each | 110.0 | 110.0 | 2.0 | False | None | None | False | None | False | 220.0 | 0 |
| 2906961 | 95455 | None | 041 | Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing 5 amps. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated
twin twisted copper wire and wiring. | Each | 150.0 | 150.0 | 4.0 | False | None | None | False | None | False | 600.0 | 0 |
| 2906962 | 95455 | None | 042 | Supplying and fixing regular MCB distribution boards on wall/ wood board / flush mounting using required clamps, bolts,nuts etc., with provision for fixing suitable type capacityMCB's single phase / 3 phase / single door with powdercoated painting. Made out of 14 SWG MS enclosure.
| Each | 3330.0 | 3330.0 | 1.0 | False | None | None | False | None | False | 3330.0 | 0 |
| 2906963 | 95455 | None | 043 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materialsand 'C' Type curve, indicator ON/OFF, energy cross-3 withShort circuit breaking capacity of 10K and complete wiringas required confirming to IEC 60898.
| Each | 434.0 | 434.0 | 1.0 | False | None | None | False | None | False | 434.0 | 0 |
| 2906964 | 95455 | None | 044 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materialsand 'C' Type curve, indicator ON/OFF, energy cross-3 withShort circuit breaking capacity of 10K and complete wiringas required confirming to IEC 60898.
| Each | 909.0 | 909.0 | 1.0 | False | None | None | False | None | False | 909.0 | 0 |
| 2906965 | 95455 | None | 045 | Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit should be filled with equal proportion of salt and charcoal 150mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts,washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia
| No | 2999.7 | 2999.7 | 1.0 | False | None | None | False | None | False | 2999.7 | 0 |
| 2906966 | 95455 | None | 046 | Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency,Power, power factor, KVA, KWH, KVAR suitable for 3phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy
| Each | 7750.0 | 7750.0 | 1.0 | False | None | None | False | None | False | 7750.0 | 0 |
| 2906967 | 95455 | None | 047 | Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms(Max) as per IS-3975
| Mtr | 225.0 | 225.0 | 20.0 | False | None | None | False | None | False | 4500.0 | 0 |
| 2906968 | 95455 | None | 048 | Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only)
| Each | 255.0 | 255.0 | 3.0 | False | None | None | False | None | False | 765.0 | 0 |
| 2906969 | 95455 | None | 049 | Labour charges for laying of 1.1 KV class UG cable in
existing trench GI pipe / stoneware pipe / on wall / on pole as required. | Mtr | 15.5 | 15.5 | 20.0 | False | None | None | False | None | False | 310.0 | 0 |
| 2906970 | 95455 | None | 050 | Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc.,complete.(As per Civil SR KSRB I-2, P-7)
| Mtr | 102.0 | 102.0 | 12.0 | False | None | None | False | None | False | 1224.0 | 0 |
| 2906971 | 95455 | None | 051 | Supplying and fixing L.T. cast Iron pot heads suitable for 1.1KV class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc.
| Each | 618.0 | 618.0 | 2.0 | False | None | None | False | None | False | 1236.0 | 0 |
| 2906972 | 95455 | None | 052 | Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1KV.
| Mtr | 566.0 | 566.0 | 4.0 | False | None | None | False | None | False | 2264.0 | 0 |