| 1709549132000 | 1 | None | None | Buildings | Additional work Construction of two sumps and renovation of PI staff mess of 20 Kn Bn NCC Shivamogga | 473568.81 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2905857 | 95428 | None | 19.11.2 | Removing mortar from and cleaning stones and concrete articles (net quantity of stacks of cleaned materials will be measured)In cement mortar(PWD SR Volume -2 ,2023-24/P.No 188 I No19.11.2) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Cum | 492.45 | 492.45 | 2.26 | False | None | None | False | None | False | 1112.937 | 0 | | 2905858 | 95428 | None | 19.22.1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of Engineer-in-charge. For thickness of tiles 10 mm to 25 mm( PWD SR Volume -2 ,2023-24/P.No 189, I No 19.22.1) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Sqm | 50.4 | 50.4 | 17.36 | False | None | None | False | None | False | 874.944 | 0 | | 2905859 | 95428 | None | 19.41.1 | Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material to the appropriate disposal area as per direction of Engineer-in-charge.75 to 80 mm dia pipe( PWD SR Volume -2 ,2023-24/P.No 191, I No 19.41.1) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Mtr | 54.6 | 54.6 | 10.0 | False | None | None | False | None | False | 546.0 | 0 | | 2905860 | 95428 | None | 19.41.2 | Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material to the appropriate disposal area as per direction of Engineer-in-charge.110 mm dia pipe( PWD SR Volume -2 ,2023-24/P.No 191, I No 19.41.2) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Mtr | 55.65 | 55.65 | 10.0 | False | None | None | False | None | False | 556.5 | 0 | | 2905861 | 95428 | None | 19.43.1 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes to the appropriate disposal area as per direction of Engineer-in-charge.15 mm to 40 mm nominal bore( PWD SR Volume -2,2023-24/P.No 191, I No 19.43.1) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Mtr | 109.2 | 109.2 | 50.0 | False | None | None | False | None | False | 5460.0 | 0 | | 2905862 | 95428 | None | 2.1.4 | Providing and laying in position plain cement concrete for leveling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates ( PWD SR Volume -1 ,2023-24/P.No 15, I No 2.1.4) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Cum | 6593.13 | 6593.13 | 0.29 | False | None | None | False | None | False | 1912.0077 | 0 | | 2905863 | 95428 | None | 8.2.2 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge( PWD SR 2023-24/ Vol -2 Chapter-8 Sl No- 8.2.2 /P.No.41) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Sqm | 292.95 | 292.95 | 14.49 | False | None | None | False | None | False | 4244.8455 | 0 | | 2905864 | 95428 | None | 9.38 | Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications.( PWD SR 2023-24/ Vol -2 Chapter-9 Sl No- 9.38 /P.No.65) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Sqm | 1461.6 | 1461.6 | 14.49 | False | None | None | False | None | False | 21178.584 | 0 | | 2905865 | 95428 | None | 9.11 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete.( PWD SR 2023-24/ Vol -2 Chapter-9 Sl No- 9.11 /P.No.60) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Sqm | 933.45 | 933.45 | 2.9 | False | None | None | False | None | False | 2707.005 | 0 | | 2905866 | 95428 | None | 13.31.2 | Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete. (internal work exposed on wall) - 20mm nominal OD pipes (PWD SR 2023-24/ Vol -2, Item No-13.31.2,Page No.122) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Mtr | 254.1 | 254.1 | 30.0 | False | None | None | False | None | False | 7623.0 | 0 | | 2905867 | 95428 | None | 13.31.5 | Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete. (internal work exposed on wall) - 40mm nominal OD pipes (PWD SR 2023-24/ Vol -2, Item. No-13.31.5,Page No.122) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Mtr | 562.8 | 562.8 | 70.0 | False | None | None | False | None | False | 39396.0 | 0 | | 2905868 | 95428 | None | 13.64.1 | Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 75mm nominal dia pipes (PWD SR 2023-24/ Vol -2, Iteam. No-13.64.1,Page No.128) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Mtr | 303.45 | 303.45 | 25.0 | False | None | None | False | None | False | 7586.25 | 0 | | 2905869 | 95428 | None | 13.64.2 | Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 110mm nominal dia pipes (PWD SR 2023-24 Vol -2,Item No-13.64.2,Page No.128) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Mtr | 404.25 | 404.25 | 20.0 | False | None | None | False | None | False | 8085.0 | 0 | | 2905870 | 95428 | None | 13.14 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 g (PWD SR 2023-24/Vol 2 P.No 119, I.no-13.14) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | No | 888.3 | 888.3 | 4.0 | False | None | None | False | None | False | 3553.2 | 0 | | 2905871 | 95428 | None | 13.15 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. (PWD SR 2023-24/Vol 2 P.No 119, I.no-13.15) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | No | 761.25 | 761.25 | 3.0 | False | None | None | False | None | False | 2283.75 | 0 | | 2905872 | 95428 | None | 14.2.1 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid (PWD SR 2023-24/Vol 2 P.No 131, I.no-14.2.1) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Each | 5079.9 | 5079.9 | 1.0 | False | None | None | False | None | False | 5079.9 | 0 | | 2905873 | 95428 | None | 14.7A | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: using White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer (PWD SR 2023-24/Vol 2 P.No 133, I.no-14.7A) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Each | 4327.05 | 4327.05 | 1.0 | False | None | None | False | None | False | 4327.05 | 0 | | 2905874 | 95428 | None | 14.36.2 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms (PWD SR 2023-24/Vol 2 P.No 137, I.no-14.36.2) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Each | 97.65 | 97.65 | 2.0 | False | None | None | False | None | False | 195.3 | 0 | | 2905875 | 95428 | None | 13.27.2 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour 15 mm nominal bore with 45 cm length (PWD SR 2023-24/Vol 2 P.No 121, I.no-13.27.2) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Each | 121.8 | 121.8 | 2.0 | False | None | None | False | None | False | 243.6 | 0 | | 2905876 | 95428 | None | 14.40.2 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. (PWD SR 2021-22/Vol 2 P.No 137, I.no-14.40.2) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Each | 520.8 | 520.8 | 2.0 | False | None | None | False | None | False | 1041.6 | 0 | | 2905877 | 95428 | None | 12.57.7 | Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spicification-do- 40 mm thick both side Teak.( PWD SR 2023-24/ Vol -2 Chapter-12 Sl No- 12.57.7 /P.No105) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Sqm | 5208.0 | 5208.0 | 16.73 | False | None | None | False | None | False | 87129.84 | 0 | | 2905878 | 95428 | None | 12.54 | Providing & fixing factory made PVC Door frame of size 50x47mm witha wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge( PWD SR 2023-24 Vol -2 Chapter-12 Sl No- 12.54 /P.No.104) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Mtr | 333.9 | 333.9 | 11.4 | False | None | None | False | None | False | 3806.46 | 0 | | 2905879 | 95428 | None | 12.55.1 | Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3nos of 75mm Aluminium hinges do- with both side prelam.( PWD SR 2023-24/ Vol -2 Chapter-12 Sl No- 12.55.1 /P.No.104) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Sqm | 2484.3 | 2484.3 | 3.15 | False | None | None | False | None | False | 7825.545 | 0 | | 2905880 | 95428 | None | 8.33.2 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR Volume -2 ,2021-22/P.No 46 I No 8.33.2) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Sqm | 144.9 | 144.9 | 69.62 | False | None | None | False | None | False | 10087.938 | 0 | | 2905881 | 95428 | None | 11.35.2.2 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications. (PWD SR 2023-24/Vol 2 P.No 88, I.no-11.35.2.2) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Kgs | 599.55 | 599.55 | 99.18 | False | None | None | False | None | False | 59463.369 | 0 | | 2905882 | 95428 | None | 11.37.2 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/m²) including cost of materials, labour, usage charges of machinery complete as per specifications.( PWD SR 2023-24/ Vol -2 Sl No- 11.37.2 /P.No.89) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Sqm | 1229.55 | 1229.55 | 15.12 | False | None | None | False | None | False | 18590.796 | 0 | | 2905883 | 95428 | None | 2.4.2 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD SR 2023-24/Vol -1 Chapter-2 Sl No-2.4.2 /P.No 17). including the rate of form work for CC drain. Cost of steel reinforcement to be paid separately. ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Cum | 8962.85 | 8962.85 | 4.83 | False | None | None | False | None | False | 43290.5655 | 0 | | 2905884 | 95428 | None | 2.4.2 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD SR 2023-24/Vol -1 Chapter-2 Sl No-2.4.2 /P.No 17). including the rate of form work for CC drain. Cost of steel reinforcement to be paid separately. ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Cum | 6971.11 | 6971.11 | 3.14 | False | None | None | False | None | False | 21889.2854 | 0 | | 2905885 | 95428 | None | 8.6.2 | Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge( PWD SR Volume -1 ,2023-24/P.No 42 /I No 8.6.2) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Sqm | 450.45 | 450.45 | 59.43 | False | None | None | False | None | False | 26770.2435 | 0 | | 2905886 | 95428 | None | 6.12 | Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:3 (1 cement : 3 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. ( PWD SR Volume -2 ,2023-24/P.No 14 /I No 6.12) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Sqm | 1053.15 | 1053.15 | 3.87 | False | None | None | False | None | False | 4075.6905 | 0 | | 2905887 | 95428 | None | 2.5.2 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. ( PWD SR Volume -1 ,2023-24/P.No 16 /I No 2.5.2) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Cum | 10777.73 | 10777.73 | 2.12 | False | None | None | False | None | False | 22848.7876 | 0 | | 2905888 | 95428 | None | 2.11a | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.( PWD SR 2023-24/ Vol -1 Sl No-2.11a /P.No.18) ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead | Tonne | 93929.85 | 93929.85 | 0.53 | False | None | None | False | None | False | 49782.8205 | 0 |
|