createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1709540745254 version 4 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 2780.00 emd 200000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 18-03-2024 16:00:00 tenderQueryClose 11-03-2024 15:00:00 technicalBidOpen 19-03-2024 16:00:01 publishedDate 04-03-2024 16:12:20 publishedByPost EWHFWD_CE_CEOFF_BNG publishedByUser KPE16838 - BALEKATTE KUMARASWAMY PAVITHRA bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate 12-03-2024 11:30:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Assistant Engineer splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08029557023 mobileNumber 9449843375 tenderSupplierList None
tenderSchedule	createdTs 1709540745286 version 8 createdDate None modifiedDate None tenderNumber EWHFWD/2023-24/BD/WORK_INDENT281 title Construction of District Integrated Public Health Laboratory in the premises of District Hospital Dharwad in Dharwad strict. description Construction of District Integrated Public Health Laboratory in the premises of District Hospital Dharwad in Dharwad strict. category WORKS categoryText Works ecv 11097332.27 deptName Engineering Wing of Health and Family Welfare Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn False location 3521 locationName EWHFWD Chief Engineer Office Bengaluru provisionalAmount 11100000.0 groupOverheadTotal 0.0 fileNumber AEEengdwd2023-24/18
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1709540745000 0 None None Buildings District Integrated Public Health Laboratory -Ground Floor Civil 788274.6 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2902352 95316 None Item 1.14.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m ---- etc.,complete with all lead Cum 126.37 126.37 33.4 False None None False None False 4220.758 0 2902353 95316 None Item 1.1A Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/Kankar/Moorum. ---- etc.,complete with all lead Cum 167.26 167.26 43.4 False None None False None False 7259.084 0 2902354 95316 None Item 1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- etc.,complete with all lead Cum 329.57 329.57 33.4 False None None False None False 11007.638 0 2902355 95316 None Item 1.8 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. ---- etc.,complete with all lead Cum 587.28 587.28 22.7 False None None False None False 13331.256 0 2902356 95316 None Item 2.1.3 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates ---- etc.,complete with all lead Cum 7420.37 7420.37 1.8306 False None None False None False 13583.729322 0 2902357 95316 None Item 2.2.1 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates footings ---- etc.,complete with all lead Cum 8412.76 8412.76 7.4025 False None None False None False 62275.4559 0 2902358 95316 None Item 2.2.1 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Pedestal ---- etc.,complete with all lead Cum 8568.55 8568.55 0.2385 False None None False None False 2043.599175 0 2902359 95316 None Item 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregate sCOLUMNS GF ---- etc.,complete with all lead Cum 14413.41 14413.41 1.024 False None None False None False 14759.33184 0 2902360 95316 None Item 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Beams GF ---- etc.,complete with all lead Cum 13565.56 13565.56 1.89 False None None False None False 25638.9084 0 2902361 95316 None Item 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Staircase FF ---- etc.,complete with all lead Cum 12717.72 12717.72 4.581 False None None False None False 58259.87532 0 2902362 95316 None Item 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates GF Lintel ---- etc.,complete with all lead Cum 13565.56 13565.56 0.056 False None None False None False 759.67136 0 2902363 95316 None Item 2.1.4 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates GF ---- etc.,complete with all lead Cum 8473.15 8473.15 0.22 False None None False None False 1864.093 0 2902364 95316 None Item 2.11a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.GF ---- etc.,complete with all lead t 110837.22 110837.22 1.84 False None None False None False 203940.4848 0 2902365 95316 None Item Approved Rate Extra for providing throating or drip moulding to RCC chejjas with plastering ( labour charges only ) as per specifications. Specification No . KBS ---- etc.,complete with all lead Rmtr 38.94 38.94 3.09 False None None False None False 120.3246 0 2902366 95316 None Item Approved Rate Providing throating elevation Patti on uniform size 10 cm wide and 12 mm thick for portico, chejjas & parapet wall elevation etc, including cost of materials , labour floor fixing, HOM of equipments and machineries all leads and lift loading and unloading, transportation , all other incidental charges at all floor levels etc, complete all as per specifications and as directed by the Engineer in charge. ---- etc.,complete with all lead Rmtr 86.14 86.14 3.09 False None None False None False 266.1726 0 2902367 95316 None Item 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. GF ---- etc.,complete with all lead Sqm 1623.09 1623.09 61.75 False None None False None False 100225.8075 0 2902368 95316 None Item 12.9 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)GF ---- etc.,complete with all lead Sqm 8343.42 8343.42 2.25 False None None False None False 18772.695 0 2902369 95316 None Item 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding GF ---- etc.,complete with all lead Kg 208.15 208.15 47.25 False None None False None False 9835.0875 0 2902370 95316 None Item 8.4.2 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. GF ---- etc.,complete with all lead Sqm 386.56 386.56 63.67 False None None False None False 24612.2752 0 2902371 95316 None Item 8.1 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. GF ---- etc.,complete with all lead Sqm 261.42 261.42 19.988 False None None False None False 5225.26296 0 2902372 95316 None Item 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. GF ---- etc.,complete with all lead Sqm 123.9 123.9 83.658 False None None False None False 10365.2262 0 2902373 95316 None Item 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.GF ---- etc.,complete with all lead Sqm 432.41 432.41 63.67 False None None False None False 27531.5447 0 2902374 95316 None Item 9.24 Providing and laying Polished Granite flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.** Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. GF ---- etc.,complete with all lead Sqm 3533.62 3533.62 22.4 False None None False None False 79153.088 0 2902375 95316 None Item 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. GF ---- etc.,complete with all lead Sqm 157.35 157.35 19.988 False None None False None False 3145.1118 0 2902376 95316 None Item 8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. GF ---- etc.,complete with all lead Sqm 193.28 193.28 463.67 False None None False None False 89618.1376 0 2902377 95316 None Item 8.34.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc.,complete with all lead Sqm 61.95 61.95 2.25 False None None False None False 139.3875 0 2902378 95316 None Item 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.GF ---- etc.,complete with all lead Sqm 142.48 142.48 2.25 False None None False None False 320.58 0 1709540745000 0 None None Buildings District Integrated Public Health Laboratory - First Floor Civil 5991676.2 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2902379 95317 None Item 19.61 Dismantling weather proof course and removing and conveying the debris to a distance to the appropriate disposal area as per direction of Engineer-in-charge. FF ---- etc.,complete with all lead Cum 720.8 720.8 39.0 False None None False None False 28111.2 0 2902380 95317 None Item 2.7B Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead.Cement Concrete Grade M-15 & M-20 FF ---- etc.,complete with all lead Cum 1167.55 1167.55 4.842 False None None False None False 5653.2771 0 2902381 95317 None Item 19.7.3 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.In cement mortar FF ---- etc.,complete with all lead Cum 1287.67 1287.67 13.24 False None None False None False 17048.7508 0 2902382 95317 None Item Approved Rate Dismantling & reconnecting for temprory connectionsof existing plumbing lines FF ---- etc.,complete with all lead Rmtr 123.88 123.88 168.0 False None None False None False 20811.84 0 2902383 95317 None Item 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FF Coloums ---- etc.,complete with all lead Cum 14557.54 14557.54 9.687 False None None False None False 141018.88998 0 2902384 95317 None Item 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FF RCC beams ---- etc.,complete with all lead Cum 13701.21 13701.21 15.77 False None None False None False 216068.0817 0 2902385 95317 None Item 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FF SLAB ---- etc.,complete with all lead Cum 12844.89 12844.89 51.715 False None None False None False 664273.48635 0 2902386 95317 None Item 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FF Lintel ---- etc.,complete with all lead Cum 13701.21 13701.21 1.467 False None None False None False 20099.67507 0 2902387 95317 None Item 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FF Staircase ---- etc.,complete with all lead Cum 12844.89 12844.89 4.41 False None None False None False 56645.9649 0 2902388 95317 None Item 2.1.4 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates FF ---- etc.,complete with all lead Cum 8557.87 8557.87 3.864 False None None False None False 33067.60968 0 2902389 95317 None Item approved rate Providing and inserting nipples with approved fixing compound after drilling holes for grouting as per Technical Specifications including subsequent cutting/removal and sealing of the hole as necessary of nipples after completion of grouting with Cement/Epoxy FF ---- etc.,complete with all lead Nos 200.22 200.22 5.0 False None None False None False 1001.1 0 2902390 95317 None Item 2.11a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.FF ---- etc.,complete with all lead t 111945.6 111945.6 9.5 False None None False None False 1063483.2 0 2902391 95317 None Item Approved Rate Extra for providing throating or drip moulding to RCC chejjas with plastering ( labour charges only ) as per specifications. Specification No . KBS FF ---- etc.,complete with all lead Rmtr 38.94 38.94 55.0 False None None False None False 2141.7 0 2902392 95317 None Item Approved Rate Providing throating elevation Patti on uniform size 10 cm wide and 12 mm thick for portico, chejjas & parapet wall elevation etc, including cost of materials , labour floor fixing, HOM of equipments and machineries all leads and lift loading and unloading, transportation , all other incidental charges at all floor levels etc, complete all as per specifications and as directed by the Engineer in charge. FF ---- etc.,complete with all lead Rmtr 86.14 86.14 55.0 False None None False None False 4737.7 0 2902393 95317 None Item 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. FF ---- etc.,complete with all lead Sqm 1639.32 1639.32 446.711 False None None False None False 732302.27652 0 2902394 95317 None Item 6.34 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. FF ---- etc.,complete with all lead Sqm 1381.53 1381.53 25.08 False None None False None False 34648.7724 0 2902395 95317 None Item 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. FF ---- etc.,complete with all lead Cum 123656.1 123656.1 0.7525 False None None False None False 93051.21525 0 2902396 95317 None Item 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. FF ---- etc.,complete with all lead Nos 1271.41 1271.41 8.0 False None None False None False 10171.28 0 2902397 95317 None Item BPH Approved Rate Providing and fixing 100/125 mm mortice latch, lock with 6 levers and a pair of lever handles, SS Handles 100/125mm, Tower Bolts, Door Catcher, Hinges 12*85*5.5mm of approved quality with necessary screws etc. complete. FF ---- etc.,complete with all lead Nos 2950.0 2950.0 8.0 False None None False None False 23600.0 0 2902398 95317 None Item 10.6.3 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm FF ---- etc.,complete with all lead Nos 75.08 75.08 48.0 False None None False None False 3603.84 0 2902399 95317 None Item 20.79 Providing & Fixing of corner beads of wooden door frame to wall including cost of materials, labour charges, complete as per specifications. FF ---- etc.,complete with all lead Rmtr 65.07 65.07 55.4 False None None False None False 3604.878 0 2902400 95317 None Item 12.57.6 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 35 mm thick both side commercial FF ---- etc.,complete with all lead Sqm 4157.11 4157.11 20.4 False None None False None False 84805.044 0 2902401 95317 None Item 12.9 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) FF ---- etc.,complete with all lead Sqm 8426.86 8426.86 26.1 False None None False None False 219941.046 0 2902402 95317 None Item 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) FF ---- etc.,complete with all lead Sqm 7156.7 7156.7 8.1 False None None False None False 57969.27 0 2902403 95317 None Item 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding FF ---- etc.,complete with all lead Kg 210.22 210.22 718.2 False None None False None False 150980.004 0 2902404 95317 None Item 12.93.1 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately) Size 62 x 100mm FF ---- etc.,complete with all lead m 878.47 878.47 20.4 False None None False None False 17920.788 0 2902405 95317 None Item 12.95 Providing and fixing factory made 18 mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali, CNC (Computer Numeric Control) routed of approved design by Engineer-incharge which are machine cut for duct/shaft covering, partitions and facades comprising of virgin Polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with properties of being termite/borer proof, water/moisture proof and fire retardant and fixing as per requirement at site with necessary stainless steel fasteners and SS screws etc., all complete as per direction of Engineer-In-Charge. (Note: M.S framework required with priming coat shall be paid separately). FF ---- etc.,complete with all lead Sqm 5519.88 5519.88 7.56 False None None False None False 41730.2928 0 2902406 95317 None Item 12.59 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. FF ---- etc.,complete with all lead Nos 1394.05 1394.05 8.0 False None None False None False 11152.4 0 2902407 95317 None Item 11.25.2 Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. FF ---- etc.,complete with all lead Kg 170.19 170.19 120.96 False None None False None False 20586.1824 0 2902408 95317 None Item 8.4.2 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. FF ---- etc.,complete with all lead Sqm 390.43 390.43 573.345 False None None False None False 223851.08835 0 2902409 95317 None Item 8.1 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. FF ---- etc.,complete with all lead Sqm 264.04 264.04 462.0684 False None None False None False 122004.540336 0 2902410 95317 None Item 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. FF ---- etc.,complete with all lead Sqm 125.14 125.14 1035.4134 False None None False None False 129571.632876 0 2902411 95317 None Item 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. FF ---- etc.,complete with all lead Sqm 436.73 436.73 210.6 False None None False None False 91975.338 0 2902412 95317 None Item 8.16.2 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment.Plaster mesh 150mm wide. FF ---- etc.,complete with all lead Rmtr 47.55 47.55 972.0 False None None False None False 46218.6 0 2902413 95317 None Item Approved Rate Bore Packing : Filling the bore wherever necessary with polymer modified concrete and brushing one coat of acrylic copolymer cross linked formulaion on the bore. Including all labour charges tools and equipments, all complete as per the manufacturer. ---- etc.,complete with all lead Sqm 283.2 283.2 10.0 False None None False None False 2832.0 0 2902414 95317 None Item 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. FF ---- etc.,complete with all lead Rmtr 65.07 65.07 312.0 False None None False None False 20301.84 0 2902415 95317 None Item 9.17.2 Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete..Size of Tile 600x600 mm FF ---- etc.,complete with all lead Sqm 1470.38 1470.38 245.6125 False None None False None False 361143.70775 0 2902416 95317 None Item 8.2.1 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. FF ---- etc.,complete with all lead Sqm 369.16 369.16 131.442 False None None False None False 48523.12872 0 2902417 95317 None Item 9.24 Providing and laying Polished Granite flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.** Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. FF ---- etc.,complete with all lead Sqm 3568.97 3568.97 22.4 False None None False None False 79944.928 0 2902418 95317 None Item 9.29 Providing and laying flooring and steps fine dressed granite stone slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. FF ---- etc.,complete with all lead Sqm 5388.48 5388.48 18.54 False None None False None False 99902.4192 0 2902419 95317 None Item 15.7 Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re-inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis) FF ---- etc.,complete with all lead Sqm 769.6 769.6 34.798 False None None False None False 26780.5408 0 2902420 95317 None Item 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete. FF ---- etc.,complete with all lead Sqm 1112.48 1112.48 34.798 False None None False None False 38712.07904 0 2902421 95317 None Item 9.39 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. FF ---- etc.,complete with all lead Sqm 1813.25 1813.25 109.03 False None None False None False 197698.6475 0 2902422 95317 None Item 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. FF ---- etc.,complete with all lead Sqm 158.92 158.92 1035.4134 False None None False None False 164547.897528 0 2902423 95317 None Item 8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. FF ---- etc.,complete with all lead Sqm 195.21 195.21 210.6 False None None False None False 41111.226 0 2902424 95317 None Item 8.34.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. FF ---- etc.,complete with all lead Sqm 62.57 62.57 34.2 False None None False None False 2139.894 0 2902425 95317 None Item 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. FF ---- etc.,complete with all lead Sqm 143.91 143.91 34.2 False None None False None False 4921.722 0 2902426 95317 None Item 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. FF ---- etc.,complete with all lead Sqm 66.32 66.32 48.96 False None None False None False 3247.0272 0 2902427 95317 None Item 8.47 Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. FF ---- etc.,complete with all lead Sqm 168.94 168.94 48.96 False None None False None False 8271.3024 0 2902428 95317 None Item 12.92 Providing& fixing of Openable door made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the openable frame. The frame having overall size of 60mm x 55mm with GI reinforcement of 1mm thickness and openable sash with overall size of 60mm x 102mm and GI reinforcement of 2mm thickness. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 34 mm. Windows shall be provided with 6mm plain float glass, Standard hardware with 2D/3D hinge & Multi point locking system with Handle. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 900mm x 2400mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) FF ---- etc.,complete with all lead Sqm 7814.92 7814.92 2.4 False None None False None False 18755.808 0 2902429 95317 None Item 12.91 Providing& fixing of Openable window made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the openable frame. The frame having overall size of 60mm x 55mm with GI reinforcement of 1mm thickness and openable sash with overall size of 60mm x 75mm and GI reinforcement of 1.5mm thickness. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 34 mm. Windows shall be provided with 5mm plain float glass, Standard hardware with friction hinge & Multi point locking system with Handle. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 900mm x 1819mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) FF ---- etc.,complete with all lead Sqm 7585.92 7585.92 3.6 False None None False None False 27309.312 0 2902430 95317 None Item Approved Rate Providing and fixing storage unit of 0. 75m depth made out of 19mm thick commercial ply vertical support finished in approved 1.00mm laminate with 12mm thick ply packing internally finished with enamel paint of approved colour and shade shelves shall be formed out of 19mm ply finished with enamel paint of approved shade and colour and 19mm thick shutters formed out of 19mm thick ply finished with 1.00mm thick laminate of approved shade and colour etc., complete the rate includes cost of all materials, labour charges, complete as per specification. ---- -- ---- etc., complete with all lead & lift, as per specifications and as per directions of the Engineer in charge of the work. FF ---- etc.,complete with all lead Sqm 17110.0 17110.0 24.72 False None None False None False 422959.2 0 2902431 95317 None Item 9.21.2 Providing and laying Vitrified tiles with thickness 9-10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm FF ---- etc.,complete with all lead Sqm 1549.22 1549.22 18.54 False None None False None False 28722.5388 0 1709540745000 0 None None Buildings District Integrated Public Health Laboratory - Second Floor Civil 2804491.97 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2902432 95318 None Item 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates SF Coloums ---- etc.,complete with all lead Cum 14701.67 14701.67 6.15 False None None False None False 90415.2705 0 2902433 95318 None Item 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates RCC beams ---- etc.,complete with all lead Cum 13836.86 13836.86 9.0 False None None False None False 124531.74 0 2902434 95318 None Item 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates RCC slab ---- etc.,complete with all lead Cum 12972.07 12972.07 23.5 False None None False None False 304843.645 0 2902435 95318 None Item 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates SF LiNTEL ---- etc.,complete with all lead Cum 13836.86 13836.86 0.6 False None None False None False 8302.116 0 2902436 95318 None Item 2.1.4 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates SF ---- etc.,complete with all lead Cum 8642.61 8642.61 1.7 False None None False None False 14692.437 0 2902437 95318 None Item Approved rate Providing and inserting nipples with approved fixing compound after drilling holes for grouting as per Technical Specifications including subsequent cutting/removal and sealing of the hole as necessary of nipples after completion of grouting with Cement/Epoxy SF ---- etc.,complete with all lead Nos 202.2 202.2 5.0 False None None False None False 1011.0 0 2902438 95318 None Item 2.11a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.SF ---- etc.,complete with all lead t 113053.97 113053.97 4.5 False None None False None False 508742.865 0 2902439 95318 None Item Approved Rate Extra for providing throating or drip moulding to RCC chejjas with plastering ( labour charges only ) as per specifications. Specification No . KBS SF ---- etc.,complete with all lead Rmtr 38.94 38.94 23.6 False None None False None False 918.984 0 2902440 95318 None Item Approved Rate Providing throating elevation Patti on uniform size 10 cm wide and 12 mm thick for portico, chejjas & parapet wall elevation etc, including cost of materials , labour floor fixing, HOM of equipments and machineries all leads and lift loading and unloading, transportation , all other incidental charges at all floor levels etc, complete all as per specifications and as directed by the Engineer in charge. SF ---- etc.,complete with all lead Rmtr 86.14 86.14 43.0 False None None False None False 3704.02 0 2902441 95318 None Item 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. SF ---- etc.,complete with all lead Sqm 1655.55 1655.55 314.1 False None None False None False 520008.255 0 2902442 95318 None Item 6.34 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. SF ---- etc.,complete with all lead Sqm 1395.2 1395.2 4.8 False None None False None False 6696.96 0 2902443 95318 None Item 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. SF ---- etc.,complete with all lead Cum 124880.42 124880.42 0.58 False None None False None False 72430.6436 0 2902444 95318 None Item 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. SF ---- etc.,complete with all lead Nos 1284.0 1284.0 6.0 False None None False None False 7704.0 0 2902445 95318 None Item Bph Approved Rate Providing and fixing 100/125 mm mortice latch, lock with 6 levers and a pair of lever handles, SS Handles 100/125mm, Tower Bolts, Door Catcher, Hinges 12*85*5.5mm of approved quality with necessary screws etc. complete. SF ---- etc.,complete with all lead Nos 5687.0 5687.0 6.0 False None None False None False 34122.0 0 2902446 95318 None Item 10.6.3 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm SF ---- etc.,complete with all lead Nos 75.82 75.82 36.0 False None None False None False 2729.52 0 2902447 95318 None Item 20.79 Providing & Fixing of corner beads of wooden door frame to wall including cost of materials, labour charges, complete as per specifications. SF ---- etc.,complete with all lead Rmtr 65.71 65.71 42.8 False None None False None False 2812.388 0 2902448 95318 None Item 12.57.6 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 35 mm thick both side commercial SF ---- etc.,complete with all lead Sqm 4198.27 4198.27 16.8 False None None False None False 70530.936 0 2902449 95318 None Item 12.9 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) SF ---- etc.,complete with all lead Sqm 8510.28 8510.28 16.2 False None None False None False 137866.536 0 2902450 95318 None Item 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) SF ---- etc.,complete with all lead Sqm 7227.56 7227.56 0.54 False None None False None False 3902.8824 0 2902451 95318 None Item 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding SF ---- etc.,complete with all lead Kg 212.31 212.31 351.54 False None None False None False 74635.4574 0 2902452 95318 None Item 12.59 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. SF ---- etc.,complete with all lead Nos 1407.84 1407.84 6.0 False None None False None False 8447.04 0 2902453 95318 None Item 11.25.2 Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. SF ---- etc.,complete with all lead Kgs 171.87 171.87 75.6 False None None False None False 12993.372 0 2902454 95318 None Item 8.4.2 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge... ( Inside) SF ---- etc.,complete with all lead Sqm 394.3 394.3 247.14 False None None False None False 97447.302 0 2902455 95318 None Item 8.1 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. SF ---- etc.,complete with all lead Sqm 266.65 266.65 247.65 False None None False None False 66035.8725 0 2902456 95318 None Item 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. SF ---- etc.,complete with all lead Sqm 126.37 126.37 494.79 False None None False None False 62526.6123 0 2902457 95318 None Item 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. ( Outside) SF ---- etc.,complete with all lead Sqm 441.06 441.06 272.26 False None None False None False 120082.9956 0 2902458 95318 None Item 8.16.2 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment.Plaster mesh 150mm wide. SF ---- etc.,complete with all lead Rmtr 48.01 48.01 678.0 False None None False None False 32550.78 0 2902459 95318 None Item Approved Rate Bore Packing : Filling the bore wherever necessary with polymer modified concrete and brushing one coat of acrylic copolymer cross linked formulaion on the bore. Including all labour charges tools and equipments, all complete as per the manufacturer. ---- etc.,complete with all lead Sqm 283.2 283.2 10.0 False None None False None False 2832.0 0 2902460 95318 None Item 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. SF ---- etc.,complete with all lead Rmtr 65.71 65.71 181.0 False None None False None False 11893.51 0 2902461 95318 None Item 9.17.2 Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm SF ---- etc.,complete with all lead Sqm 1484.94 1484.94 97.27 False None None False None False 144440.1138 0 2902462 95318 None Item 9.29 Providing and laying flooring and steps fine dressed granite stone slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. SF ---- etc.,complete with all lead Sqm 5441.84 5441.84 15.67 False None None False None False 85273.6328 0 2902463 95318 None Item 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. SF ---- etc.,complete with all lead Sqm 160.5 160.5 494.79 False None None False None False 79413.795 0 2902464 95318 None Item 8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. SF ---- etc.,complete with all lead Sqm 197.15 197.15 272.26 False None None False None False 53676.059 0 2902465 95318 None Item 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. SF ---- etc.,complete with all lead Sqm 145.34 145.34 18.09 False None None False None False 2629.2006 0 2902466 95318 None Item 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. SF ---- etc.,complete with all lead Sqm 66.97 66.97 14.4 False None None False None False 964.368 0 2902467 95318 None Item 9.21.2 Providing and laying Vitrified tiles with thickness 9-10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm SF ---- etc.,complete with all lead Sqm 1564.56 1564.56 20.89 False None None False None False 32683.6584 0 1709540745000 0 None None Buildings District Integrated Public Health Laboratory - Internal Water Supply and Sanitary Work 546021.12 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2902468 95319 None Item 14.28.1.2 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.40mm dia pipes, From wash basin waste lines FF ---- etc.,complete with all lead Rmtr 110.11 110.11 30.0 False None None False None False 3303.3 0 2902469 95319 None Item 10.1.5 Providing and fixing PVC pipe - OD 75mm and 6 Kg/sqcm, waste lines FF ---- etc.,complete with all lead Rmtr 262.78 262.78 40.0 False None None False None False 10511.2 0 2902470 95319 None Item 10.1.7 Providing and fixing PVC pipe - OD 110mm and 6 Kg/sqcm, sanitary lines FF ---- etc.,complete with all lead Rmtr 514.32 514.32 30.0 False None None False None False 15429.6 0 2902471 95319 None Item 14.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. FF ---- etc.,complete with all lead Nos 1526.7 1526.7 2.0 False None None False None False 3053.4 0 2902472 95319 None Item 13.16 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 FF ---- etc.,complete with all lead Each 775.86 775.86 2.0 False None None False None False 1551.72 0 2902473 95319 None Item 14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever requiredWC pan with ISI marked white solid sheet and lid FF ---- etc.,complete with all lead Each 7479.56 7479.56 4.0 False None None False None False 29918.24 0 2902474 95319 None Item 14.28.2.2 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Flexible pipe 40mm ---- etc.,complete with all lead Nos 115.13 115.13 5.0 False None None False None False 575.65 0 2902475 95319 None Item 13.15 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. FF ---- etc.,complete with all lead Nos 907.25 907.25 5.0 False None None False None False 4536.25 0 2902476 95319 None Item 14.11.2 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm FF ---- etc.,complete with all lead Nos 6359.56 6359.56 4.0 False None None False None False 25438.24 0 2902477 95319 None Item 14.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps FF ---- etc.,complete with all lead Each 3856.78 3856.78 2.0 False None None False None False 7713.56 0 2902478 95319 None Item 14.22A Providing and fixing CP Brass 32mm size Bottle Trap of approved quality& make and as per the direction of Engineer-in-charge. FF ---- etc.,complete with all lead Each 1013.63 1013.63 6.0 False None None False None False 6081.78 0 2902479 95319 None Item 615 Providing and fixing Unplasticised P.V.C.connection pipe with brass union 30 cm long 15 mm bore FF ---- etc.,complete with all lead Each 37.54 37.54 10.0 False None None False None False 375.4 0 2902480 95319 None Item 14.37.1 Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms FF ---- etc.,complete with all lead Each 382.92 382.92 8.0 False None None False None False 3063.36 0 2902481 95319 None Item 13.2.1 Providing and fixing brass bib cock of approved quality 15 mm nominal bore ---- etc.,complete with all lead Nos. 357.89 357.89 10.0 False None None False None False 3578.9 0 2902482 95319 None Item 13.32.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15mm Nominal dia FF ---- etc.,complete with all lead Rmtr 386.67 386.67 20.0 False None None False None False 7733.4 0 2902483 95319 None Item 13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and makingood the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20mm Nominal dia FF ---- etc.,complete with all lead Rmtr 474.27 474.27 30.0 False None None False None False 14228.1 0 2902484 95319 None Item 13.33.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 20 mm nominal dia Pipes ---- etc.,complete with all lead Rmtr 271.55 271.55 30.0 False None None False None False 8146.5 0 2902485 95319 None Item 13.33.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 25 mm nominal dia Pipes ---- etc.,complete with all lead Rmtr 370.41 370.41 20.0 False None None False None False 7408.2 0 2902486 95319 None Item 13.4.1 Providing and fixing Brass full way valve with C.I. wheel (screwed end) 25 mm dia ---- etc.,complete with all lead Each 687.0 687.0 8.0 False None None False None False 5496.0 0 2902487 95319 None Item 16.9 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.. ---- etc.,complete with all lead Nos. 6825.08 6825.08 5.0 False None None False None False 34125.4 0 2902488 95319 None Item 13.34 Providing and placing on terrace (at all floor levels) polyethylene water storage tank,IS:12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank. ---- etc.,complete with all lead l 11.25 11.25 2000.0 False None None False None False 22500.0 0 2902489 95319 None Item 14.28.2.2 SF: Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines ---- etc.,complete with all lead Rmtr 111.21 111.21 30.0 False None None False None False 3336.3 0 2902490 95319 None Item 10.1.5 Providing and fixing PVC pipe - OD 75mm and 6 Kg/sqcm, waste lines SF ---- etc.,complete with all lead Rmtr 265.39 265.39 40.0 False None None False None False 10615.6 0 2902491 95319 None Item 10.1.7 Providing and fixing PVC pipe - OD 110mm and 6 Kg/sqcm, sanitary lines SF ---- etc.,complete with all lead Rmtr 519.41 519.41 30.0 False None None False None False 15582.3 0 2902492 95319 None Item 13.47 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expansion,(i)the single socketed pipes 75mm diameter ---- etc.,complete with all lead Rmtr 248.96 248.96 30.0 False None None False None False 7468.8 0 2902493 95319 None Item 13.48 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expansion,(i)the single socketed pipes 100mm diameter ---- etc.,complete with all lead Rmtr 367.75 367.75 20.0 False None None False None False 7355.0 0 2902494 95319 None Item 14.3.1 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. SF ---- etc.,complete with all lead Nos 1415.43 1415.43 1.0 False None None False None False 1415.43 0 2902495 95319 None Item 13.16 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 SF ---- etc.,complete with all lead Each 783.54 783.54 1.0 False None None False None False 783.54 0 2902496 95319 None Item 14.28.2.2 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. SF ---- etc.,complete with all lead Nos 116.26 116.26 2.0 False None None False None False 232.52 0 2902497 95319 None Item 13.15 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. ---- etc.,complete with all lead Nos 916.24 916.24 5.0 False None None False None False 4581.2 0 2902498 95319 None Item 14.11.2 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm SF ---- etc.,complete with all lead Nos 6422.52 6422.52 3.0 False None None False None False 19267.56 0 2902499 95319 None Item 14.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps SF ---- etc.,complete with all lead Each 3894.96 3894.96 2.0 False None None False None False 7789.92 0 2902500 95319 None Item 14.22A Providing and fixing CP Brass 32mm size Bottle Trap of approved quality& make and as per the direction of Engineer-in-charge. SF ---- etc.,complete with all lead Each 1023.66 1023.66 6.0 False None None False None False 6141.96 0 2902501 95319 None Item 14.37.1 Bottle trap 31mm single piece moulded with height of 270 mm, eSFective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms SF ---- etc.,complete with all lead Each 386.72 386.72 8.0 False None None False None False 3093.76 0 2902502 95319 None Item 13.2.1 Providing and fixing brass bib cock of approved quality 15 mm nominal bore ---- etc.,complete with all lead Nos. 361.44 361.44 10.0 False None None False None False 3614.4 0 2902503 95319 None Item 13.32.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.15 mm nominal dia Pipes ---- etc.,complete with all lead Rmtr 390.5 390.5 20.0 False None None False None False 7810.0 0 2902504 95319 None Item 13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc20 mm nominal dia Pipes ---- etc.,complete with all lead Rmtr 478.97 478.97 30.0 False None None False None False 14369.1 0 2902505 95319 None Item 13.33.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work)20 mm nominal dia Pipes ---- etc.,complete with all lead Rmtr 274.24 274.24 30.0 False None None False None False 8227.2 0 2902506 95319 None Item 13.33.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work)25 mm nominal dia Pipes ---- etc.,complete with all lead Rmtr 374.08 374.08 20.0 False None None False None False 7481.6 0 2902507 95319 None Item 13.4.1 Providing and fixing Brass full way valve with C.I. wheel (screwed end) 25 mm dia ---- etc.,complete with all lead Each 693.81 693.81 8.0 False None None False None False 5550.48 0 2902508 95319 None Item 16.9 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.. ---- etc.,complete with all lead Nos 6892.65 6892.65 5.0 False None None False None False 34463.25 0 2902509 95319 None Item Approved rate Providing, fixing, testing and commissioning of deep seal PVC multi inlet floor trap of self cleansing design moulded or fabricated with CP grating, rubber ring / solvent cement followed by application of leak proof adhesive like FRP paste including making good the floors etc., complete as directed by the Engineer in charge & approved quality confirming to ISI or BIS Standards 10Cms X 7.5Cms ---- etc.,complete with all lead Nos 371.7 371.7 10.0 False None None False None False 3717.0 0 2902510 95319 None Item Approved rate Air Vent Cowel75mm ---- etc.,complete with all lead Nos 413.0 413.0 10.0 False None None False None False 4130.0 0 2902511 95319 None Item Approved rate Air Vent Cowel 110mm ---- etc.,complete with all lead Nos 590.0 590.0 5.0 False None None False None False 2950.0 0 2902512 95319 None Item Approved rate Providing and fixing testing and commissioning of CP health faucet Hand operated spray unit (instant type) CP Crutch etc., complete as directed by the Engineer in charge. ALD-577 ---- etc.,complete with all lead Nos 1180.0 1180.0 7.0 False None None False None False 8260.0 0 2902513 95319 None Item Approved rate Providing and fixing, testing and commissioning approved make submersible pump made of C.I Construction suitable for building application. Thequoted rate shall also include for auto lvl.controller. providing necessary safety devices viz. dry run protection, over load relays etc., complete working on 230V, 50Hz, 1Ph, with starter,Duty of Pump : 6.0cum/hr @ 35.0m Head (1 No. Working + 1 No. Stand By) ---- etc.,complete with all lead Nos 17700.0 17700.0 2.0 False None None False None False 35400.0 0 2902514 95319 None Item Approved rate Providing stoneware gully trap of approved quality and make fixing in M-15 and plastering with CM 1:3 wherever necessary.( Rate includes cost of all materials, fixtures and lead).15cms x 10cms ---- etc.,complete with all lead Nos 3304.0 3304.0 4.0 False None None False None False 13216.0 0 2902515 95319 None Item Quatation rate The Tendorer (Agency ) should arrange to obtain (Get) , detailed Architectural drawings and elevations, Structural designs and drawings including Soil exploration & proof checking by IISC /IIT/NIT or relevant only as decided by the Department and the same has to be furnished to the Department for approval and providing consultancy for Architectural designs & drawings, elevation, 3D view, MFP design and Drawings, Internal and External Electrical services including electrical infrastructure , interior layout and allied works etc., and any other drawings related to this project and 5 sets of as built drawings should be submitted to the employer. - etc., complete as per the specification and Engineer-in-charge of work ---- etc.,complete with all lead Job 94400.0 94400.0 1.0 False None None False None False 94400.0 0 1709540745000 0 None None Buildings District Integrated Public Health Laboratory - Internal Electrical Work 966868.38 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2902516 95320 None Item 2.2.1 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.Short point up to 3Mtr from tapping point to out let via switch ---- etc.,complete with all lead Point 333.29 333.29 25.0 False None None False None False 8332.25 0 2902517 95320 None Item 2.2.2 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch ---- etc.,complete with all lead Point 469.58 469.58 34.0 False None None False None False 15965.72 0 2902518 95320 None Item 2.2.3 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.Long point above 6Mtr up to 10Mtr from tapping point to out let via switch ---- etc.,complete with all lead Point 687.64 687.64 40.0 False None None False None False 27505.6 0 2902519 95320 None Item 2.2.4 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.Two outlet in a row, above 3Mtr up to 6Mtr from tapping point to out let via switches ---- etc.,complete with all lead Point 838.8 838.8 6.0 False None None False None False 5032.8 0 2902520 95320 None Item 3.4.1 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wal1-3Way ---- etc.,complete with all lead Each 197.0 197.0 20.0 False None None False None False 3940.0 0 2902521 95320 None Item 3.4.2 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wal1 4-5Way ---- etc.,complete with all lead Each 219.3 219.3 8.0 False None None False None False 1754.4 0 2902522 95320 None Item 3.4.3 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wal1 6Way ---- etc.,complete with all lead Each 272.58 272.58 4.0 False None None False None False 1090.32 0 2902523 95320 None Item 3.4.4 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wal1 8 Way ---- etc.,complete with all lead Each 323.37 323.37 10.0 False None None False None False 3233.7 0 2902524 95320 None Item 3.4.5 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wal1 10-12Way ---- etc.,complete with all lead Each 395.24 395.24 35.0 False None None False None False 13833.4 0 2902525 95320 None Item 3.5.1 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wal1 to 3 Module ---- etc.,complete with all lead Each 199.47 199.47 20.0 False None None False None False 3989.4 0 2902526 95320 None Item 3.5.2 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wal4 Module ---- etc.,complete with all lead Each 216.82 216.82 8.0 False None None False None False 1734.56 0 2902527 95320 None Item 3.5.3 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wal6 Module ---- etc.,complete with all lead Each 289.92 289.92 4.0 False None None False None False 1159.68 0 2902528 95320 None Item 3.5.4 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wal 8 Module ---- etc.,complete with all lead Each 351.87 351.87 10.0 False None None False None False 3518.7 0 2902529 95320 None Item 3.5.5 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wal10-12 Module ---- etc.,complete with all lead Each 426.21 426.21 35.0 False None None False None False 14917.35 0 2902530 95320 None Item 3.6.1 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6Amps one way Switch ---- etc.,complete with all lead Each 126.37 126.37 184.0 False None None False None False 23252.08 0 2902531 95320 None Item 3.6.3 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6Amps 3way socket ---- etc.,complete with all lead Each 211.87 211.87 79.0 False None None False None False 16737.73 0 2902532 95320 None Item 3.6.4 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.Stepped Fan Regulator. ---- etc.,complete with all lead Each 442.32 442.32 24.0 False None None False None False 10615.68 0 2902533 95320 None Item 3.6.8 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.16Amps one way switch ---- etc.,complete with all lead Each 223.02 223.02 5.0 False None None False None False 1115.1 0 2902534 95320 None Item 3.6.10 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.32Amps DP switch ---- etc.,complete with all lead Each 403.91 403.91 13.0 False None None False None False 5250.83 0 2902535 95320 None Item 3.6.11 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6/16Amps universal socket ---- etc.,complete with all lead Each 292.4 292.4 18.0 False None None False None False 5263.2 0 2902536 95320 None Item 1.12 Supplyin and Fixing Metal Fan Box with Round Hook. ---- etc.,complete with all lead Nos 144.96 144.96 24.0 False None None False None False 3479.04 0 2902537 95320 None Item 1.2.1 Concealed Conduit System Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2)19/20mm dia 2mm thick ---- etc.,complete with all lead Rmtr 81.77 81.77 450.0 False None None False None False 36796.5 0 2902538 95320 None Item 1.2.2 Concealed Conduit System Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2)25mm dia 2mm thick ---- etc.,complete with all lead Rmtr 96.64 96.64 250.0 False None None False None False 24160.0 0 2902539 95320 None Item 1.2.3 Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2)32mm dia 2.5mm thick ---- etc.,complete with all lead Rmtr 127.61 127.61 100.0 False None None False None False 12761.0 0 2902540 95320 None Item 1.3.1 Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary.19/20mm dia 2mm thick ---- etc.,complete with all lead Rmtr 84.25 84.25 350.0 False None None False None False 29487.5 0 2902541 95320 None Item 1.3.2 Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary.25mm dia 2mm thick ---- etc.,complete with all lead Rmtr 97.88 97.88 250.0 False None None False None False 24470.0 0 2902542 95320 None Item 1.3.3 Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary.32mm dia 2.5mm thick ---- etc.,complete with all lead Rmtr 122.66 122.66 50.0 False None None False None False 6133.0 0 2902543 95320 None Item 2.3.2 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments1.5 sqmm ---- etc.,complete with all lead Rmtr 32.21 32.21 400.0 False None None False None False 12884.0 0 2902544 95320 None Item 2.3.3 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments2.5 sqmm ---- etc.,complete with all lead Rmtr 52.03 52.03 800.0 False None None False None False 41624.0 0 2902545 95320 None Item 2.3.4 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments4 sqmm ---- etc.,complete with all lead Rmtr 78.05 78.05 500.0 False None None False None False 39025.0 0 2902546 95320 None Item 2.3.5 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments6 sqmm ---- etc.,complete with all lead Rmtr 113.98 113.98 300.0 False None None False None False 34194.0 0 2902547 95320 None Item 5.18.4 supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. I- Single Door Made out of 14 SWG MS enclosure12 Way SP & N ---- etc.,complete with all lead Each 2308.25 2308.25 1.0 False None None False None False 2308.25 0 2902548 95320 None Item 5.18.9 supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. I- Single Door Made out of 14 SWG MS enclosure4 Way TPN DB ---- etc.,complete with all lead Each 5003.08 5003.08 1.0 False None None False None False 5003.08 0 2902549 95320 None Item 5.18.12 supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. I- Single Door Made out of 14 SWG MS enclosure6 Way TP & N ---- etc.,complete with all lead Each 6120.66 6120.66 1.0 False None None False None False 6120.66 0 2902550 95320 None Item 5.17.1 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 608986-32Amps SP ---- etc.,complete with all lead Each 514.18 514.18 40.0 False None None False None False 20567.2 0 2902551 95320 None Item 5.17.8 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 6089840 A TPN ---- etc.,complete with all lead Each 3771.51 3771.51 1.0 False None None False None False 3771.51 0 2902552 95320 None Item 5.17.9 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 6089850-63Amps TPN ---- etc.,complete with all lead Each 3826.03 3826.03 1.0 False None None False None False 3826.03 0 2902553 95320 None Item 5.17.4 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 608986-32Amps DP ---- etc.,complete with all lead Each 915.62 915.62 1.0 False None None False None False 915.62 0 2902554 95320 None Item 5.20.3 Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240/450V up to 300mA sensitivity on existing wood/panel board 32-40 Amps 4 pole ---- etc.,complete with all lead Each 5648.6 5648.6 2.0 False None None False None False 11297.2 0 2902555 95320 None Item BSR-32.09 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 3.5 core 35 sqmm ---- etc.,complete with all lead Km 219103.52 219103.52 0.1 False None None False None False 21910.352 0 2902556 95320 None Item BSR-31.06 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 35 sqmm to 95 sqmm ---- etc.,complete with all lead Km 29298.63 29298.63 0.1 False None None False None False 2929.863 0 2902557 95320 None Item SR 19-20-6.11.3 Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) 32mm dia ---- etc.,complete with all lead Each 151.15 151.15 8.0 False None None False None False 1209.2 0 2902558 95320 None Item BSR 49.05 Supplying and fixing of class A (medium duty) GI pipe of wall thick ness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV class. 50mm ---- etc.,complete with all lead Rmtr 474.53 474.53 10.0 False None None False None False 4745.3 0 2902559 95320 None Item SR 19-20-6.17.8 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 35 sqmm Long Barrel ---- etc.,complete with all lead Each 39.64 39.64 8.0 False None None False None False 317.12 0 2902560 95320 None Item BSR-29.03 Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr,Supplying and Displaying necessary Danger Boards and Lighting, Using sightRails and Sign Boards at every 100 Mtr wherever necessary as directed In soil (hard) ---- etc.,complete with all lead Cum 481.97 481.97 50.0 False None None False None False 24098.5 0 2902561 95320 None Item SR 19-20-6.2 Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm alround with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts. ---- etc.,complete with all lead Nos 5141.85 5141.85 2.0 False None None False None False 10283.7 0 2902562 95320 None Item SR 19-20-6.3.1 upplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip ---- etc.,complete with all lead Rmtr 101.6 101.6 20.0 False None None False None False 2032.0 0 2902563 95320 None Item 11.3.2 Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fighting 1 x4'- 20/22 w ---- etc.,complete with all lead Each 854.91 854.91 45.0 False None None False None False 38470.95 0 2902564 95320 None Item 11.5.2.. Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @50/60Hz & Power factor 0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical conditionLED square or round down light 10-12W ---- etc.,complete with all lead Each 1096.51 1096.51 12.0 False None None False None False 13158.12 0 2902565 95320 None Item 11.11.3 Supplying & fixing of retrofit type - LED bulb.......W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per watt, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.7 W, 6500K ---- etc.,complete with all lead Each 184.61 184.61 6.0 False None None False None False 1107.66 0 2902566 95320 None Item 11.11.5.. Supplying & fixing of retrofit type - LED bulb.......W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per watt, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.12W, 6500K ---- etc.,complete with all lead Each 333.29 333.29 4.0 False None None False None False 1333.16 0 2902567 95320 None Item 12.46 Supplying & Fixing of 70-150 Watts lamp holder 2 Pin ---- etc.,complete with all lead Each 131.33 131.33 10.0 False None None False None False 1313.3 0 2902568 95320 None Item 11.8.2.. Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency130lm/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. LED Streetlight 40W ---- etc.,complete with all lead Nos 7424.08 7424.08 2.0 False None None False None False 14848.16 0 2902569 95320 None Item 6.1 Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. ---- etc.,complete with all lead Each 1848.58 1848.58 10.0 False None None False None False 18485.8 0 2902570 95320 None Item 6.3.1 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system.48" Sweep (1200mm) Regular model ---- etc.,complete with all lead Each 3697.17 3697.17 24.0 False None None False None False 88732.08 0 2902571 95320 None Item 13.7.1 Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps.On wall / ceiling / Rafter / Girders ---- etc.,complete with all lead Each 151.15 151.15 65.0 False None None False None False 9824.75 0 2902572 95320 None Item 13.1 Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing 5 amps. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring. ---- etc.,complete with all lead Each 211.87 211.87 24.0 False None None False None False 5084.88 0 2902573 95320 None Item 13.13 Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. ---- etc.,complete with all lead Each 875.97 875.97 10.0 False None None False None False 8759.7 0 2902574 95320 None Item 13.4.1 Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4” dia telescopic M. S. pipe, with 2” dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M. S. sheet, grip bolts & nuts, as required, suitable for 9 to 12 Mtrs. M. S. tubular pole, with necessary two coats of painting, with all other acceSingle bracket 1.5 Mtr. Length ---- etc.,complete with all lead Each 1810.17 1810.17 2.0 False None None False None False 3620.34 0 2902575 95320 None Item 13.5 Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. ---- etc.,complete with all lead Each 200.71 200.71 2.0 False None None False None False 401.42 0 2902576 95320 None Item 5.42.2 Fabricating supplying and mounting MS box made out ...SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour etc., complete16SWG ---- etc.,complete with all lead Sq CM 0.53 0.53 60000.0 False None None False None False 31800.0 0 2902577 95320 None Item 5.40.1 Supplying .........amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete.100Amps 4x30x6mm Aluminum Strips ---- etc.,complete with all lead Rmtr 3054.13 3054.13 1.0 False None None False None False 3054.13 0 2902578 95320 None Item 5.41.1 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 40x40x6mm ---- etc.,complete with all lead Rmtr 377.89 377.89 10.0 False None None False None False 3778.9 0 2902579 95320 None Item 5.41.1 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 50x100x50x6mm C channel ---- etc.,complete with all lead Rmtr 936.68 936.68 10.0 False None None False None False 9366.8 0 2902580 95320 None Item 5.14.7 Supplying and fixing Moulded Case Circuit Breaker (MCCB) .over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of Overload and Short circuit with thermal Magnetic/Micro processor release and Earth Fault as per IS-13947. (lcu= lcs) FOUR POLE 63A/100Amps 25kA ---- etc.,complete with all lead Each 7540.55 7540.55 1.0 False None None False None False 7540.55 0 2902581 95320 None Item 5.17.1 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 606-32Amps SP ---- etc.,complete with all lead Each 514.18 514.18 3.0 False None None False None False 1542.54 0 2902582 95320 None Item 5.17.4 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 606-32Amps DP ---- etc.,complete with all lead Each 915.62 915.62 1.0 False None None False None False 915.62 0 2902583 95320 None Item 5.17.9 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 50 63Amps TPN ---- etc.,complete with all lead Each 3826.03 3826.03 5.0 False None None False None False 19130.15 0 2902584 95320 None Item 5.33 Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy ---- etc.,complete with all lead Each 11541.28 11541.28 1.0 False None None False None False 11541.28 0 2902585 95320 None Item 5.38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C ---- etc.,complete with all lead Each 638.08 638.08 3.0 False None None False None False 1914.24 0 2902586 95320 None Item 5.34 Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound (48/6.32) ---- etc.,complete with all lead Each 696.31 696.31 3.0 False None None False None False 2088.93 0 2902587 95320 None Item 3.6.13 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293RJ45/ I.O. outlet ---- etc.,complete with all lead Each 417.54 417.54 11.0 False None None False None False 4592.94 0 2902588 95320 None Item 3.6.12 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293Telephone socket ---- etc.,complete with all lead Each 193.28 193.28 10.0 False None None False None False 1932.8 0 2902589 95320 None Item 8.1 Supplying and drawing UTP-CAT 6E LAN cable. ---- etc.,complete with all lead Rmtr 47.08 47.08 330.0 False None None False None False 15536.4 0 2902590 95320 None Item 8.10.1 Supplying & Fixing of I/O Socket with back box Single I/O ---- etc.,complete with all lead Each 607.11 607.11 11.0 False None None False None False 6678.21 0 2902591 95320 None Item 8.4.1 Supplying & Fixing of switch mounting rack with power manager & Cable manager (85/11.4) 4U with 450mm depth ---- etc.,complete with all lead Each 6061.18 6061.18 1.0 False None None False None False 6061.18 0 2902592 95320 None Item 8.9.11 16 port 10/100/1000 Switch ---- etc.,complete with all lead Each 7979.16 7979.16 1.0 False None None False None False 7979.16 0 2902593 95320 None Item 8.11.1 Supplying & fixing of ..mtrs. Cat 6Patch Cable. 2Mtr ---- etc.,complete with all lead Each 277.53 277.53 11.0 False None None False None False 3052.83 0 2902594 95320 None Item 8.12.3 16 Port 10/100 patch panel ---- etc.,complete with all lead Each 3778.95 3778.95 1.0 False None None False None False 3778.95 0 2902595 95320 None Item 8.13.2 Supplying and fixing of MDF krone junction box with KRONE Module / Telephone cable termination. 20 Pair ---- etc.,complete with all lead Rmtr 474.53 474.53 1.0 False None None False None False 474.53 0 2902596 95320 None Item MR TELEPHONES Analog push button telephone with Caller ID, flash and radial ---- etc.,complete with all lead Nos 1858.5 1858.5 10.0 False None None False None False 18585.0 0 2902597 95320 None Item 1.2.2 Supplying heavy gauge PVC conduit pipe 25mm dia 2mm thick thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2) ---- etc.,complete with all lead Rmtr 96.64 96.64 420.0 False None None False None False 40588.8 0 2902598 95320 None Item 8.2.2 Supplying and drawing PVC flexible 2 pair telepone unarmoured tinned copper cable. ---- etc.,complete with all lead Rmtr 26.01 26.01 200.0 False None None False None False 5202.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1709540747000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1709540747000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1709540747000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1709540812000 0 None None ELIGIBILITY The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of Karnataka public Procurement portal due to internet connectivity issues and technical glitches at bidders end. None 1709540827000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection None 1709540845000 0 None None ELIGIBILITY Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder None 1709540873000 0 None None ELIGIBILITY The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs. None 1709540894000 0 None None ELIGIBILITY Conditional tenders will not be accepted. None 1709540910000 0 None None ELIGIBILITY All the formats prescribed in the bid document shall be filled by the tenderer in complete manner. None 1709540926000 0 None None ELIGIBILITY Royalty on construction materials and other taxes will be deducted as per prevailing Govt., orders as may be modified from time to time. None 1709540945000 0 None None ELIGIBILITY Any discrepancies observed in the documents uploaded by the tenderer the tender shall liable to rejected. None 1709540975000 0 None None ELIGIBILITY Earnest Money Deposit will have to be in any one of the forms as per the instructions in the financial bid document and shall have to be valid for 45 days beyond the validity of the tender. None 1709540995000 0 None None ELIGIBILITY All formats prescribed in the bid documents shall be filled in complete manner (section 2 & of the bid document)and shall be uploaded properly, signed by tenderer. Necessary certificates shall be uploaded along with the formats wherever required. General documents section can be used for this purpose None 1709541024000 0 None None ELIGIBILITY Tenderers are required to read the Bid Documents carefully before submission of their bid. None 1709541047000 0 None None ELIGIBILITY If the tenderer quotes bid price below the estimated contract value (Amount put to tender) then the tenderer has to submit the additional security deposit equal to the difference in cost and the additional security deposit should have a validity for the period of execution. None 1709541072000 0 None None ELIGIBILITY If the numbers of page to be attached in one particular attachment is more, then all the pages can be put into one folder, zipped and then attached or else all the pages can be pasted in one word file and then this word file could be converted to PDF (portable documents format) format and then attached. (Please contract help desk from 9.00 AM to 9.00 PM ( Monday to Saturday) Ph No: 91-8046010000 and 91-8068948777 or send query through Karnataka public procurement portal through query option on or before specified time. None 1709541100000 0 None None ELIGIBILITY The Contractor shall strictly take all reasonable steps to protect the environment on and off the site and to avoid damage or nuisance to persons or to property of the public or others resulting from pollution, noise or other causes arising as a consequence of his methods of operation. None 1709541126000 0 None None ELIGIBILITY Materials like, steel (primary), cement, bitumen etc., required for the work shall be procured by the tenderer themselves and should be got tested positive by the quality control authority before use on the work. None 1709541160000 0 None None ELIGIBILITY Tenderer should have latest GST Registration and latest clearance certificate in their name None 1709544700000 0 None None ELIGIBILITY The Rates quoted by the tenderer shall be inclusive of GST None 1709544724000 0 None None ELIGIBILITY Special Instructions to tenderers - as per bid document. None 1709544757000 0 None None ELIGIBILITY The Defects Liability Period is 1 year from the date of completion of the work. None 1709544781000 0 None None ELIGIBILITY Total value of Civil Engineering Construction works executed in the and payments received in the last five year i.e., 2018-19, 2019-20, 2020-21 2021-22 & 2023-24. None 1709544802000 0 None None ELIGIBILITY The Tenderers are bound to furnish the original certified documents to the employer within 3 days from the day of opening of technical bid for verification, failing which the bid of tenderer will be considered as technically non responsive None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Total value of civl engineering works executed and payments received in the last five years (year-wise) None None None None None None List of works for which tenders already submitted None None None None None None Banker Details for reference None None None None None None Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded None None None None None None Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years None None None None None None List of Financial Resources with Certificates None None None None None None Clause ITT 3.2(b)To qualify for award of this contract, each Tenderer in his/its name should have in the last five years i.e.(2018-19 to 2022-23) The tenderer should have been Satisfactorily completed at least one Satisfactorily completed at least one Similar work of value not less than Rs.55.50 Lakhs as prime contractor. Note : The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (b). Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Clause 3.2(c) To qualify for award of this contract, each Tenderer in his/its name should have in the last five years i.e.(2018-19 to 2022-23).Executed in any one year, the following minimum quantities of work Sl. No Description of key items of works Quantity 1)Earthwork Excavation 72.00 Cum,2)RCC and PCC 117.00 Cum,3)Steel Reinforcement for RCC work 12.50 tonne,4)Cement Concrete Block Masonry/Solid Block Masonry /Load Bearing Wall/BBM 682.00 Sqm,5)Flooring/Dadooing(Vitrified/Granite/Ceramic/Cement concrete/cladding/dadooing) 487.00 Sqm,6)Plastering 1848.00 Sqm,7)Painting 1810.0.00 Sqm, 8)M.S grill work 650.00 kg 9)WPC 28.00 Sqm Note-The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2(c) Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Clause 3.2(d) The tenderer or his identified sub contractor should possess required valid electrical license for executing building electrification works issued by KPWD/ Government electrical Inspectorate and should have executed similar Building electrical works totaling Rs.4.84 Lakhs in any one financial year.Note-The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (d).The letter of willingness of the sub contractor to be engaged for electrical, should be obtained and uploaded in the KPP-portal. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Clause 3.2(e)The Tenderer or his identified sub-contractor should possess valid license for executing water supply/sanitary engineering works issued by BWSSB/ KUWS&DB and should have executed similar building water supply/sanitary engineering works totaling Rs.2.73 Lakhs in any one financial year. Note-The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (e).The letter of willingness of the sub contractor to be engaged for water supply & Sanitary, should be obtained and uploaded in the KPP-portal Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None KPWD Class-III&above Registration Certificate. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Registration certificate issued by competent authority None None None None Clause 3.3(b)Liquid assets and /or availability of credit facilities of not less than Rs. 33.50 Lakhs (Credit lines / letter of credit/ certificates from banks for meeting the fund requirement etc.(As per the prescribed format in clause 1.10 of SECTION 3, QUALIFICATION INFORMATION of this document.) as prime Contractor. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Line of Credit None None None None Clause 3.6 Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated for prime contractor are as under Assessed available tender capacity AxNx1.5- B Where A maximum value of civil engineering works executed in any one year during the last five years 2018-19 to 2022-23 updated to 2023-24 price level taking into account the completed as well as works in progress. N Number of years prescribed for completion of the works for which tenders are invited. B Value, at 2023 24 price level of existing commitments and ongoing works to be completed during the next 06 months. Note The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- List of ongoing works None None None None List of Minimum Key Personnel to be deployed by the contractor at site for Contract work Sl No Position Qualification and Requirement No of Persons.1)Site Engineer BE Civil with minimum experience of 7 years in the Construction of buildings or Diploma in Civil Engineering with minimum experience of 10 years in the Construction of buildings and should have been working in permanent role of the organization for at least two years 1 (One), 2)Electrical Engineer BE Electrical with minimum experience of 5 years in the Construction of buildings Or Diploma in Electrical Engineering with minimum experience of 10 years in the Construction of buildings and should have been working in permanent role of the organization for at least two years 1 (One). Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Educational and Experience certificates should be uploaded None None None None Clause ITT 3.2(a):To qualify for award of this contract, each Tenderer in his / its name should have in the last five years i.e.(2018-19 to 2022-23).The tenderer should have been achieved in at least two financial years a minimum annual financial turnover (in all classes of civil Engineering construction works only) of Rs.221.94 Lakhs. Note: For Clause 3.2 (a) the Turn over certificate and balance sheet duly certified by the charted accountant is to be submitted. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover
tenderCriterionDocumentList	documentName optional documentTypeText Annual Turnover Certificate True Technical Bid KPWD Class-III&above Registration Certificate. True Technical Bid GST certificate and latest paid receipt True Technical Bid ESI and PF certificate and latest paid receipt True Technical Bid
tenderWorkLocationList
tenderAddress	createdTs 1709548608000 version 0 createdDate None modifiedDate None blockNumber Office of the Chief Engineer, Engineering Wing, HFWD, Arogya Soudha, 3rd Floor, 1st Cross Magadi Road. street None city Bengaluru state Karnataka pin 560023
tenderRecallDTO	None