createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1710066792448 version 6 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 7500.00 emd 1117000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 20-04-2024 17:30:00 tenderQueryClose 15-04-2024 17:30:00 technicalBidOpen 22-04-2024 11:00:00 publishedDate 10-03-2024 17:54:17 publishedByPost KSHD_JDIR_VEG_JDOFF_BNG publishedByUser KPE20304 - K DHANARAJ bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate 21-03-2024 11:00:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Dhanraj K splitEmdRequiredYn True emdBankGuarantee 1017000.00 emdCash 100000.00 bgValidityPeriod 135 hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber None mobileNumber 9448592678 tenderSupplierList None
tenderSchedule	createdTs 1710066792490 version 6 createdDate None modifiedDate None tenderNumber KSHD/2023-24/BD/WORK_INDENT5 title Construction of Cold Storage of Capacity 2000 MT at Chawenahally Horticulture Farm, Malur Taluk, Kolar District ,Karnataka description Construction of Cold Storage of Capacity 2000 MT at Chawenahally Horticulture Farm, Malur Taluk, Kolar District, Karnataka category WORKS categoryText Works ecv 100731700.68 deptName Karnataka State Horticulture Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn False location 5201 locationName KSHD Joint Director Office Vegetables Bengaluru provisionalAmount 101706000.0 groupOverheadTotal 15365852.65 fileNumber DH/JDH/VEG/SADH/PHM/AHO-2/31/2023-24
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1710066792000 0 None None Buildings CIVIL WORK 45455851.77 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2978708 98795 None KSHD1 COLD STORAGE - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. (Excavation Payable for Footing Area Only) In all kinds of soils Depth upto 3 m CUBIC METER 102.0 102.0 359.7 False None None False None False 36689.4 0 2978709 98795 None KSHD2 Earth work excavation for Foundation by mechanical means for all works & depth upto 1.5 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. (Excavation Payable for Footing Area Only) In ordinary/soft rock without blasting upto 1.5 m depth CUBIC METER 363.0 363.0 226.35 False None None False None False 82165.05 0 2978710 98795 None KSHD3 Earth work excavation for Foundation by mechanical means for all works & depth upto 1.5 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. (Excavation Payable for Footing Area Only) In ordinary/soft rock without blasting Depth exceeding 1.5 m, but not exceeding 3 m CUBIC METER 425.0 425.0 298.27 False None None False None False 126764.75 0 2978711 98795 None KSHD4 Earth work excavation for FOUNDATION by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including cost of explosives, dressing of excavated surfaces, disposing off or levelling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, blasting materials, tools, usage of Machinery & all other appurtenaces required to complete the work. (Excavation Payable for Footing Area Only)In Hard Rock ( requiring blasting) Depth upto 1.50m CUBIC METER 554.0 554.0 10.0 False None None False None False 5540.0 0 2978712 98795 None KSHD5 Earth work excavation for FOUNDATION by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including cost of explosives, dressing of excavated surfaces, disposing off or levelling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, blasting materials, tools, usage of Machinery & all other appurtenaces required to complete the work. (Excavation Payable for Footing Area Only)Depth exceeding 1.5 m, but not exceeding 3 m CUBIC METER 623.0 623.0 10.0 False None None False None False 6230.0 0 2978713 98795 None KSHD6 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. CUBIC METER 266.0 266.0 40.11 False None None False None False 10669.26 0 2978714 98795 None KSHD7 Filling available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. CUBIC METER 474.0 474.0 298.01 False None None False None False 141256.74 0 2978715 98795 None KSHD8 Providing and injecting chemical emulsion for Pre-constructional Anti-TeRmtrtrite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/Sqm including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. Sqm 118.0 118.0 749.56 False None None False None False 88448.08 0 2978716 98795 None KSHD9 Providing and Filling in foundation with granite / trap broken metal 100mm. And down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift complete as per specifications. CUBIC METER 2682.0 2682.0 115.75 False None None False None False 310441.5 0 2978717 98795 None KSHD10 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost including Centering and shuttering but excluding steel reinforcement) Mix 1:5:10 Using 40 mm nominal size graded crushed coarse aggregates CUBIC METER 5338.0 5338.0 10.0 False None None False None False 53380.0 0 2978718 98795 None KSHD11 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost including Centering and shuttering but excluding steel reinforcement)Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates. CUBIC METER 5664.0 5664.0 151.72 False None None False None False 859342.08 0 2978719 98795 None KSHD12 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications.(The cost including Centering and shuttering but excluding steel reinforcement)Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates CUBIC METER 6217.0 6217.0 10.0 False None None False None False 62170.0 0 2978720 98795 None KSHD13 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.(The cost including Centering and shuttering but excluding steel reinforcement) Sqm5 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for Flooring Works CUBIC METER 6480.0 6480.0 64.14 False None None False None False 415627.2 0 2978721 98795 None KSHD14 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost including Centering and shuttering but excluding steel reinforcement) CUBIC METER0 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Flooring CUBIC METER 6605.0 6605.0 10.0 False None None False None False 66050.0 0 2978722 98795 None KSHD15 The concrete finished with shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in-charge. (The panel shuttering work shall be paid for separately). Sqm 200.0 200.0 728.0 False None None False None False 145600.0 0 2978723 98795 None KSHD16 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confiRmtrtring to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost including Centering and shuttering but excluding steel reinforcement) CUBIC METER0 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Footing and Lift wall. CUBIC METER 7281.36 7281.36 193.7965 False None None False None False 1411102.08324 0 2978724 98795 None KSHD17 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confiRmtrtring to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost including Centering and shuttering but excluding steel reinforcement) CUBIC METER0 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Column/Pedastrals and Lift wall. CUBIC METER 11461.4 11461.4 31.46 False None None False None False 360575.644 0 2978725 98795 None KSHD18 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confiRmtrtring to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost including Centering and shuttering but excluding steel reinforcement) CUBIC METER0 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PLINTH BEAM. CUBIC METER 10113.0 10113.0 49.14 False None None False None False 496952.82 0 2978726 98795 None KSHD19 Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confiRmtrtring to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost including Centering and shuttering but excluding steel reinforcement) Ground Floor Column. CUBIC METER 11911.9 11911.9 83.27 False None None False None False 991903.913 0 2978727 98795 None KSHD20 Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confiRmtrtring to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost including Centering and shuttering but excluding steel reinforcement) Ground Floor Roof Beam CUBIC METER 11211.2 11211.2 122.97 False None None False None False 1378641.264 0 2978728 98795 None KSHD21 Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confiRmtrtring to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost including Centering and shuttering but excluding steel reinforcement) Ground Floor Roof Slab, Staircase Slab CUBIC METER 10510.5 10510.5 18.77 False None None False None False 197282.085 0 2978729 98795 None KSHD22 Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confiRmtrtring to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost including Centering and shuttering but excluding steel reinforcement) Ground Floor Sunshade CUBIC METER 10610.15 10610.15 1.18 False None None False None False 12519.977 0 2978730 98795 None KSHD23 Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confiRmtrtring to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost including Centering and shuttering but excluding steel reinforcement)First Floor Column CUBIC METER 12031.02 12031.02 71.71 False None None False None False 862744.4442 0 2978731 98795 None KSHD24 Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confiRmtrtring to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost including Centering and shuttering but excluding steel reinforcement)First Floor Roof Beam CUBIC METER 11323.31 11323.31 122.97 False None None False None False 1392427.4307 0 2978732 98795 None KSHD25 Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confiRmtrtring to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost including Centering and shuttering but excluding steel reinforcement)First Floor Roof Slab,Staircase slab. CUBIC METER 10615.61 10615.61 18.86 False None None False None False 200210.4046 0 2978733 98795 None KSHD26 Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confiRmtrtring to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost including Centering and shuttering but excluding steel reinforcement) First Floor Sunshade CUBIC METER 10261.75 10261.75 1.65 False None None False None False 16931.8875 0 2978734 98795 None KSHD27 Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confiRmtrtring to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost including Centering and shuttering but excluding steel reinforcement)Second Floor Column CUBIC METER 12151.33 12151.33 73.96 False None None False None False 898712.3668 0 2978735 98795 None KSHD28 Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confiRmtrtring to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost including Centering and shuttering but excluding steel reinforcement)Second Floor Roof Beam CUBIC METER 11436.55 11436.55 54.45 False None None False None False 622720.1475 0 2978736 98795 None KSHD29 Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confiRmtrtring to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost including Centering and shuttering but excluding steel reinforcement)Second Floor Roof Slab CUBIC METER 10721.76 10721.76 4.0 False None None False None False 42887.04 0 2978737 98795 None KSHD30 Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confiRmtrtring to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost including Centering and shuttering but excluding steel reinforcement) Second Floor Sunshade CUBIC METER 10364.37 10364.37 0.12 False None None False None False 1243.7244 0 2978738 98795 None KSHD31 Providing and placing in position precast reinforced cement concrete waffle units, square or rectangular, as per design and shape for floors and roofs in CUBIC METER0 Grade Concrete, including flush or deep ruled pointing at joints in Cement mortar 1:2 (1 Cement : 2 Fine sand), making necessary holes of required sizes for carrying through service lines etc., providing steel hooks for lifting etc, foRmtrtr work in precasting, handling, hoisting, centering and erection complete for all floor levels but, excluding the cost of reinforcement. CUBIC METER 26610.14 26610.14 99.39 False None None False None False 2644781.8146 0 2978739 98795 None KSHD32 Providing TheRmtrtro-Mechanically Treated bars of grade Fe-550 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) Kg 96.0 96.0 195200.8 False None None False None False 18739276.8 0 2978740 98795 None KSHD33 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. CUBIC METER 7978.0 7978.0 52.15 False None None False None False 416052.7 0 2978741 98795 None KSHD34 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. CUBIC METER 7969.0 7969.0 302.98 False None None False None False 2414447.62 0 2978742 98795 None KSHD35 Providing Brick work with Non Modular fly ash bricks confoRmtrtring to IS:12894, class designation 5.0 average compressive strength in super structure above plinth level up to floor I level in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. CUBIC METER 7627.0 7627.0 10.0 False None None False None False 76270.0 0 2978743 98795 None KSHD36 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 (1 cement :3 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work Sqm 1060.0 1060.0 349.19 False None None False None False 370141.4 0 2978744 98795 None KSHD37 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 312.0 312.0 1983.8 False None None False None False 618945.6 0 2978745 98795 None KSHD38 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 354.0 354.0 1719.63 False None None False None False 608749.02 0 2978746 98795 None KSHD39 Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof including cost of material, labour, scaffolding etc as per specifications and as per directions of the Engineer-in-Charge. Sqm 58.0 58.0 199.5043 False None None False None False 11571.2494 0 2978747 98795 None KSHD40 Providing and fixing suitable plaster mesh 150mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/Sqm width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment Rmtr 38.0 38.0 150.0 False None None False None False 5700.0 0 2978748 98795 None KSHD41 FoRmtrtring groove of unifoRmtrtr size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. m 52.0 52.0 50.0 False None None False None False 2600.0 0 2978749 98795 None KSHD42 Providing and laying Cement concrete flooring 40 mm thick with 20 mm nominal size stone aggregate using 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry complete. Sqm 451.0 451.0 227.98 False None None False None False 102818.98 0 2978750 98795 None KSHD43 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 Sqm) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 174.0 174.0 1719.63 False None None False None False 299215.62 0 2978751 98795 None KSHD44 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 Sqm over and including one coat of Special primer applied @ 0.75 L/10 Sqm with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life) Sqm 158.0 158.0 1983.8 False None None False None False 313440.4 0 2978752 98795 None KSHD45 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Sqm 4242.0 4242.0 10.0 False None None False None False 42420.0 0 2978753 98795 None KSHD46 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confoRmtrtring to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Sqm 2633.0 2633.0 3.75 False None None False None False 9873.75 0 2978754 98795 None KSHD47 Extra for providing mechanical device chain and crank operation for operating rolling shutters: including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineerin- Charge. Sqm 987.0 987.0 3.75 False None None False None False 3701.25 0 2978755 98795 None KSHD48 Extra for providing 2 HP Mild Steel Auto Reverse Shutter Gearbox for operating rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Each 24686.0 24686.0 1.0 False None None False None False 24686.0 0 2978756 98795 None KSHD49 Providing and fixing Structural Steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 106.0 106.0 1000.0 False None None False None False 106000.0 0 2978757 98795 None KSHD50 Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in Charge. Kg 113.0 113.0 1000.0 False None None False None False 113000.0 0 2978758 98795 None KSHD51 Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in Charge. Kg 136.0 136.0 2500.0 False None None False None False 340000.0 0 2978759 98795 None KSHD52 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 Sqm over an under coat of primer applied @0.75 ltr/10 Sqm of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 138.0 138.0 20.0 False None None False None False 2760.0 0 2978760 98795 None KSHD53 Providing, fabricating, transporting and erecting at all heights, depths and locations steel structures such as columns, beams, trusses, portals, bracings, purlins, gantry girders, ladders, stair cases , steps, castellated girders, latticed girders, monorails, platfoRmtrtrs, brackets, rails, walkways, cleats, gutters, separators, pipes, anchor bolt and sleeves, plate girders etc. using joists, angles, channels, flats, rounds, plates etc. cutting to required size, bending, riveting, bolting and/or welding of joints, fixing in line and level with temporary staging, including one coat of red oxide primer and two coats of synthetic enamel paint The rate should also include supply of labour, all consumables and etc. required for proper completion of the work. PEB Structure MT 105932.0 105932.0 20.83 False None None False None False 2206563.56 0 2978761 98795 None KSHD54 Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete as per design drawings (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer in charge 0.63 mm thick with zinc coating not less than 275 g/ Sqm Sqm 879.0 879.0 872.71 False None None False None False 767112.09 0 2978762 98795 None KSHD55 Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of unifoRmtrtr pigmentation and thickness without air pockets and shall confoRmtrtr to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2 mm thick corrugated (2.5"" or 4.2"" or 6"") or step-down (2"" or 3"" or 6"" ) as specified Sqm 1058.0 1058.0 20.0 False None None False None False 21160.0 0 2978763 98795 None KSHD56 Providing & fixing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete as per design drawings. 0.63 mm thick with zinc coating not less than 275 g/Sqm m 639.0 639.0 30.7 False None None False None False 19617.3 0 2978764 98795 None KSHD57 Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. (0.63 mm thick with zinc coating not less than 275 g/Sqm) m 645.0 645.0 61.4 False None None False None False 39603.0 0 2978765 98795 None KSHD58 Supply and installation of wind driven turbine ventilators (mill finish) throat width 600mm, the turbine head and variable angle elbow is manufactured out of aluminum alloy having 0.71mm thick vanes, the shaft is made out of stainless steel, and the installation using stainless steel hardware and EPDM rubber washers and with double row ball-bearing system. SPEC: Rotation: Twin Sealed 6203ZZ/Twin Sealed 6201ZZ bearings with self lubricating to ensure frictionless rotation even at lowest wind velocity, 42 Vanes, Base Ring MOC (Mounting Ring): SS, Top plate MOC : SS 0.8mm thk, Bearing Type: SKF - 6001 ZZ & 6003 ZZ PeRmtrtranently Lubricated & Sealed, Rivets: Aluminum Alloy with Washer, FRP base: 2 mm thick clear 1.020 mtr wide and 1.65 mtr long matching your sheet profile, Size: Turbine dia- 28" , Throat dia- 24" , Height18". (Make: Hurricane, SVS ventillators, Horne) Each 7500.0 7500.0 10.0 False None None False None False 75000.0 0 2978766 98795 None KSHD59 Supplying PVC ringtite pipes confoRmtrtring to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 110mm dia., 6 kg/sqcm & class 3 m 441.0 441.0 120.0 False None None False None False 52920.0 0 2978767 98795 None KSHD60 Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 110mm dia PVC Bend Each 492.0 492.0 8.0 False None None False None False 3936.0 0 2978768 98795 None KSHD61 Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 110mm dia PVC Elbows Each 302.0 302.0 8.0 False None None False None False 2416.0 0 2978769 98795 None KSHD62 TECHNICIAN SHED - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. (Excavation Payable for Footing Area Only) In all kinds of soils Depth upto 3 m CUBIC METER 102.0 102.0 23.52 False None None False None False 2399.04 0 2978770 98795 None KSHD63 Earth work excavation for Foundation by mechanical means for all works & depth upto 1.5 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. (Excavation Payable for Footing Area Only) In ordinary/soft rock without blasting upto 1.5 m depth CUBIC METER 363.0 363.0 28.55 False None None False None False 10363.65 0 2978771 98795 None KSHD64 Earth work excavation for Foundation by mechanical means for all works & depth upto 1.5 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work Depth exceeding 1.5 m, but not exceeding 3 m CUBIC METER 425.0 425.0 16.46 False None None False None False 6995.5 0 2978772 98795 None KSHD65 Earth work excavation for FOUNDATION by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including cost of explosives, dressing of excavated surfaces, disposing off or levelling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, blasting materials, tools, usage of Machinery & all other appurtenaces required to complete the work. (Excavation Payable for Footing Area Only)In Hard Rock ( requiring blasting) Depth upto 1.50m CUBIC METER 554.0 554.0 10.0 False None None False None False 5540.0 0 2978773 98795 None KSHD66 Earth work excavation for FOUNDATION by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including cost of explosives, dressing of excavated surfaces, disposing off or levelling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, blasting materials, tools, usage of Machinery & all other appurtenaces required to complete the work. (Excavation Payable for Footing Area Only)Depth exceeding 1.5 m, but not exceeding 3 m CUBIC METER 623.0 623.0 10.0 False None None False None False 6230.0 0 2978774 98795 None KSHD67 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. CUBIC METER 266.0 266.0 10.17 False None None False None False 2705.22 0 2978775 98795 None KSHD68 Filling available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour, rolling,water,all materials,usage& all other appurtenaces required to complete the work. CUBIC METER 474.0 474.0 30.31 False None None False None False 14366.94 0 2978776 98795 None KSHD69 Providing and injecting chemical emulsion for Pre constructional Anti-TeRmtrtrite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/Sqm including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. Sqm 118.0 118.0 80.6748 False None None False None False 9519.6264 0 2978777 98795 None KSHD70 Providing and Filling in foundation with granite / trap broken metal 100mm. And down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift complete as per specifications. CUBIC METER 2682.0 2682.0 13.8933 False None None False None False 37261.8306 0 2978778 98795 None KSHD71 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost including Centering and shuttering but excluding steel reinforcement) Mix 1:5:10 Using 40 mm nominal size graded crushed coarse aggregates CUBIC METER 5338.0 5338.0 10.0 False None None False None False 53380.0 0 2978779 98795 None KSHD72 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost including Centering and shuttering but excluding steel reinforcement)Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates CUBIC METER 5664.0 5664.0 13.8933 False None None False None False 78691.6512 0 2978780 98795 None KSHD73 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications.(The cost including Centering and shuttering but excluding steel reinforcement)Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates CUBIC METER 6217.0 6217.0 10.0 False None None False None False 62170.0 0 2978781 98795 None KSHD74 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.(The cost including Centering and shuttering but excluding steel reinforcement) Sqm5 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for Flooring Works CUBIC METER 6480.0 6480.0 7.41 False None None False None False 48016.8 0 2978782 98795 None KSHD75 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost including Centering and shuttering but excluding steel reinforcement) CUBIC METER0 Design Mix Using 20 mm nominal size graded crushed coarse aggregates CUBIC METER 6605.0 6605.0 10.0 False None None False None False 66050.0 0 2978783 98795 None KSHD76 The concrete finished with shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in-charge. Sqm 200.0 200.0 80.6748 False None None False None False 16134.96 0 2978784 98795 None KSHD77 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confiRmtrtring to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost including Centering and shuttering but excluding steel reinforcement) CUBIC METER0 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Footing CUBIC METER 7281.36 7281.36 7.06 False None None False None False 51406.4016 0 2978785 98795 None KSHD78 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confiRmtrtring to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost including Centering and shuttering but excluding steel reinforcement) CUBIC METER0 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Column/Pedastrals Basement to ground floor CUBIC METER 11461.4 11461.4 1.4256 False None None False None False 16339.37184 0 2978786 98795 None KSHD79 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confiRmtrtring to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost including Centering and shuttering but excluding steel reinforcement) CUBIC METER0 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Plinth Beam CUBIC METER 10113.0 10113.0 6.91 False None None False None False 69880.83 0 2978787 98795 None KSHD80 Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confiRmtrtring to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost including Centering and shuttering but excluding steel reinforcement) CUBIC METER0 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Ground Floor Column Sqm 11911.9 11911.9 3.4 False None None False None False 40500.46 0 2978788 98795 None KSHD81 Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confiRmtrtring to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost including Centering and shuttering but excluding steel reinforcement)CUBIC METER0 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Ground Floor Column Ground Floor Roof Beam & Lintel Beam Sqm 11211.2 11211.2 5.73 False None None False None False 64240.176 0 2978789 98795 None KSHD82 Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confiRmtrtring to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost including Centering and shuttering but excluding steel reinforcement)CUBIC METER0 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Ground Floor Column Ground Floor Roof Slab CUBIC METER 10510.5 10510.5 7.41 False None None False None False 77882.805 0 2978790 98795 None KSHD83 Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confiRmtrtring to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost including Centering and shuttering but excluding steel reinforcement)CUBIC METER0 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Ground Floor Column Ground Floor Sunshade CUBIC METER 10160.15 10160.15 0.7038 False None None False None False 7150.71357 0 2978791 98795 None KSHD84 Providing and placing in position precast reinforced cement concrete waffle units, square or rectangular, as per design and shape for floors and roofs in CUBIC METER0 Grade Concrete, including flush or deep ruled pointing at joints in Cement mortar 1:2 (1 Cement : 2 Fine sand), making necessary holes of required sizes for carrying through service lines etc., providing steel hooks for lifting etc, foRmtrtr work in precasting, handling, hoisting, centering and erection complete for all floor levels but, excluding the cost of reinforcement. CUBIC METER 26610.0 26610.0 5.0 False None None False None False 133050.0 0 2978792 98795 None KSHD85 Providing TheRmtrtro-Mechanically Treated bars of grade Fe-550 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) Kg 96.0 96.0 5519.41 False None None False None False 529863.36 0 2978793 98795 None KSHD86 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. CUBIC METER 7978.0 7978.0 5.99 False None None False None False 47788.22 0 2978794 98795 None KSHD87 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. CUBIC METER 7969.0 7969.0 26.95 False None None False None False 214764.55 0 2978795 98795 None KSHD88 Providing Brick work with Non Modular fly ash bricks confoRmtrtring to IS:12894, class designation 5.0 average compressive strength in super structure above plinth level up to floor I level in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. CUBIC METER 7627.0 7627.0 10.0 False None None False None False 76270.0 0 2978796 98795 None KSHD89 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 (1 cement :3 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work Sqm 1060.0 1060.0 35.658 False None None False None False 37797.48 0 2978797 98795 None KSHD90 Half brick masonry with Non Modular fly ash bricks of class designation 5.0, confoRmtrtring to IS :12894, in super structure above plinth and upto floor I level cement mortar 1 : 3 (1 cement : 3 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work Sqm 988.0 988.0 10.0 False None None False None False 9880.0 0 2978798 98795 None KSHD91 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 323.0 323.0 41.4 False None None False None False 13372.2 0 2978799 98795 None KSHD92 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 312.0 312.0 138.53 False None None False None False 43221.36 0 2978800 98795 None KSHD93 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 349.0 349.0 9.9984 False None None False None False 3489.4416 0 2978801 98795 None KSHD94 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 354.0 354.0 185.5857 False None None False None False 65697.3378 0 2978802 98795 None KSHD95 Providing and fixing suitable plaster mesh 150mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/Sqm width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment Rmtr 38.0 38.0 500.0 False None None False None False 19000.0 0 2978803 98795 None KSHD96 FoRmtrtring groove of unifoRmtrtr size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. m 52.0 52.0 100.0 False None None False None False 5200.0 0 2978804 98795 None KSHD97 Providing and laying Cement concrete flooring 40 mm thick with 20 mm nominal size stone aggregate using 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry complete. Sqm 451.0 451.0 10.0 False None None False None False 4510.0 0 2978805 98795 None KSHD98 Providing White washing with lime to give an even shade :New work (three coats) with lime of approved quality, including cost of materials, labour complete as per specifications and as per directions of Engineer- in-charge. Sqm 26.0 26.0 41.4 False None None False None False 1076.4 0 2978806 98795 None KSHD99 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 Sqm) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 174.0 174.0 185.5857 False None None False None False 32291.9118 0 2978807 98795 None KSHD100 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 Sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Sqm 156.0 156.0 138.53 False None None False None False 21610.68 0 2978808 98795 None KSHD101 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 100.0 100.0 138.53 False None None False None False 13853.0 0 2978809 98795 None KSHD102 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and confoRmtrtring to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ Sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm Sqm 1238.0 1238.0 35.26 False None None False None False 43651.88 0 2978810 98795 None KSHD103 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 600x600 mm Sqm 209.0 209.0 35.26 False None None False None False 7369.34 0 2978811 98795 None KSHD104 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :** Flamed finish granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. Sqm 2466.0 2466.0 36.37 False None None False None False 89688.42 0 2978812 98795 None KSHD105 Providing and laying flooring and steps machine cut granite slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with ce- ment mortar 1:3 over existing cement concrete bed , including cost of materials, mortar labour, curing complete as per specifications. Sqm 4279.0 4279.0 23.622 False None None False None False 101078.538 0 2978813 98795 None KSHD106 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality confoRmtrtring to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ Sqm including pointing the joints with white cement and matching pigments etc., complete. Sqm 889.0 889.0 8.3468 False None None False None False 7420.3052 0 2978814 98795 None KSHD107 Providing and fixing 1st quality ceramic glazed wall tiles confoRmtrtring to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per Sqm, including pointing in white cement mixed with pigment of matching shade complete. Sqm 1106.0 1106.0 43.473 False None None False None False 48081.138 0 2978815 98795 None KSHD108 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per Sqm to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per Sqm and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. Sqm 817.0 817.0 53.99 False None None False None False 44109.83 0 2978816 98795 None KSHD109 Providing & fixing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement: 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete. Sqm 565.0 565.0 49.3956 False None None False None False 27908.514 0 2978817 98795 None KSHD110 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications. CUBIC METER 2017.0 2017.0 4.94 False None None False None False 9963.98 0 2978818 98795 None KSHD111 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. CUBIC METER 98815.0 98815.0 0.23 False None None False None False 22727.45 0 2978819 98795 None KSHD112 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. Nos. 1016.0 1016.0 7.0 False None None False None False 7112.0 0 2978820 98795 None KSHD113 Providing and fixing cramps of required size & shape in RCC/ CC / Brick masonry backing with cement mortar 1:2 ( 1 cement :2 coarse sand), including drilling necessary hole in stones and embedding the cramp in the hole (fastener to be paid separately). Stainless steel cramps Kg 529.0 529.0 8.4 False None None False None False 4443.6 0 2978821 98795 None KSHD114 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm Each 60.0 60.0 42.0 False None None False None False 2520.0 0 2978822 98795 None KSHD115 Providing and fixing flush door shutter made out of solid core block board type, well seasoned, chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol foRmtraldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. 35 mm thick both side commercial Sqm 3322.0 3322.0 5.67 False None None False None False 18835.74 0 2978823 98795 None KSHD116 Providing & fixing fiber glass reinforced plastic (FRP) Door frame of cross section 90mm x 45mm having single rebate of 32mm x 15mm to recieve shutter of 30mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyster resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The fram,e shall be covered with fiber glass foRmtr all sides. MS stay shall be provided at the bottom Rmtr 643.0 643.0 19.6 False None None False None False 12602.8 0 2978824 98795 None KSHD117 Providing & fixing to existing door frames, 30mm thick Glass fibre reinforced plastic (FRP) panelled door shutter of required colour and approved brand and manufacture made with fire retardant grade unsaturated polyster resin, moulded to 3mm thick FRP Laminate for foRmtring hollow railsand styles with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings cast monolithically with 5mm thick FRP Laminate for panels confoRmtring to IS 14856 Including fixing to frames Sqm 3204.0 3204.0 5.88 False None None False None False 18839.52 0 2978825 98795 None KSHD118 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. Nos 1052.0 1052.0 3.0 False None None False None False 3156.0 0 2978826 98795 None KSHD119 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. Nos 990.0 990.0 3.0 False None None False None False 2970.0 0 2978827 98795 None KSHD120 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete Nos 237.0 237.0 6.0 False None None False None False 1422.0 0 2978828 98795 None KSHD121 Providing and fixing bright finished brass handles with screws etc. complete: Brass handles 125 mm with plate 175x32 mm Each 249.0 249.0 6.0 False None None False None False 1494.0 0 2978829 98795 None KSHD122 Providing and fixing bright finished brass handles with screws etc. complete: Brass handles 100 mm with plate 150x32 mm Each 231.0 231.0 6.0 False None None False None False 1386.0 0 2978830 98795 None KSHD123 Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete Nos 130.0 130.0 14.0 False None None False None False 1820.0 0 2978831 98795 None KSHD124 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x70x4 mm (ordinary type) Nos 184.0 184.0 18.0 False None None False None False 3312.0 0 2978832 98795 None KSHD125 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 100x70x4 mm (ordinary type) Nos 140.0 140.0 12.0 False None None False None False 1680.0 0 2978833 98795 None KSHD126 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. Nos 120.0 120.0 7.0 False None None False None False 840.0 0 2978834 98795 None KSHD127 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. Nos 1114.0 1114.0 7.0 False None None False None False 7798.0 0 2978835 98795 None KSHD128 Providing and fixing chromium plated brass curtain rod with ISI mark having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete 20mm dia m 653.0 653.0 6.0 False None None False None False 3918.0 0 2978836 98795 None KSHD129 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(TheRmtro Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mm height with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size - 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 6734.0 6734.0 6.6 False None None False None False 44444.4 0 2978837 98795 None KSHD130 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(TheRmtro Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size - 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 5719.0 5719.0 0.36 False None None False None False 2058.84 0 2978838 98795 None KSHD131 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. Kg 183.0 183.0 110.0 False None None False None False 20130.0 0 2978839 98795 None KSHD132 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 565.0 565.0 200.0 False None None False None False 113000.0 0 2978840 98795 None KSHD133 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Sqm 4242.0 4242.0 2.0 False None None False None False 8484.0 0 2978841 98795 None KSHD134 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confoRmtring to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Sqm 2633.0 2633.0 6.048 False None None False None False 15924.384 0 2978842 98795 None KSHD135 Extra for providing mechanical device chain and crank operation for operating rolling shutters: including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineerin- Charge. Sqm 987.0 987.0 6.048 False None None False None False 5969.376 0 2978843 98795 None KSHD136 Extra for providing 2 HP Mild Steel Auto Reverse Shutter Gearbox for operating rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Each 24686.0 24686.0 1.0 False None None False None False 24686.0 0 2978844 98795 None KSHD137 Providing and fixing double action hydraulic floor spring of approved brand manufacture confoRmtring to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge: With stainless steel cover plate minimum 1.25 mm thickness including cost of materials, labour, usage charges of machinery complete as per specifications. Each 2619.0 2619.0 7.0 False None None False None False 18333.0 0 2978845 98795 None KSHD138 Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 113.0 113.0 1183.625 False None None False None False 133749.625 0 2978846 98795 None KSHD139 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 Sqm over an under coat of primer applied @0.75 ltr/10 Sqm of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 138.0 138.0 5.67 False None None False None False 782.46 0 2978847 98795 None KSHD140 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in- charge. Sqm 50.0 50.0 118.72 False None None False None False 5936.0 0 2978848 98795 None KSHD141 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 115.0 115.0 118.72 False None None False None False 13652.8 0 2978849 98795 None KSHD142 Providing & fixing corrugated G.S. sheet roofing including vertical /curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete as per design drawings (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer in charge.0.63 mm thick with zinc coating not less than 275 g/ Sqm Sqm 879.0 879.0 51.51 False None None False None False 45277.29 0 2978850 98795 None KSHD143 Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. (0.63 mm thick with zinc coating not less than 275 g/Sqm) m 645.0 645.0 4.25 False None None False None False 2741.25 0 2978851 98795 None KSHD144 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes confoRmtring to IS : 13592 Type A, including jointing with seal ring confoRmtring to IS : 5382, leaving 10 mm gap for theRmtral expansion, (i) Single socketed pipes 100 mm diameter m 291.0 291.0 50.0 False None None False None False 14550.0 0 2978852 98795 None KSHD145 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes of 150mm dia confoRmtring to IS : 13592 Type A, including jointing with seal ring confoRmtring to IS : 5382, leaving 10 mm gap for theRmtral expansion, (i) Single socketed pipes. m 568.0 568.0 100.0 False None None False None False 56800.0 0 2978853 98795 None KSHD146 Water Supply - Providing and fixing C.P. brass long body bib cock of approved quality confoRmtring to IS standards and weighing not less than 690 g. Nos. 846.0 846.0 3.0 False None None False None False 2538.0 0 2978854 98795 None KSHD147 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make confoRmtring to IS:8931. Nos. 725.0 725.0 4.0 False None None False None False 2900.0 0 2978855 98795 None KSHD148 Providing and fixing gun metal non- return valve of approved quality (screwed end) : 32 mm nominal bore - Vertical Nos. 925.0 925.0 1.0 False None None False None False 925.0 0 2978856 98795 None KSHD149 Providing and fixing gun metal non- return valve of approved quality (screwed end) : 40 mm nominal bore - Vertical Nos. 1225.0 1225.0 1.0 False None None False None False 1225.0 0 2978857 98795 None KSHD150 Supplying PVC ringtite pipes confoRmtring to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 25mm dia, 10 kg/sqcm & class 5 Rmtr 48.0 48.0 10.0 False None None False None False 480.0 0 2978858 98795 None KSHD151 Supplying PVC ringtite pipes confoRmtring to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 32mm dia, 10 kg/sqcm & class 5 Rmtr 67.0 67.0 10.0 False None None False None False 670.0 0 2978859 98795 None KSHD152 Supplying PVC ringtite pipes confoRmtring to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 75mm dia., 6 kg/sqcm & class 3 Rmtr 220.0 220.0 6.0 False None None False None False 1320.0 0 2978860 98795 None KSHD153 Supplying PVC ringtite pipes confoRmtring to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 110mm dia., 6 kg/sqcm & class 3 Rmtr 411.0 411.0 6.0 False None None False None False 2466.0 0 2978861 98795 None KSHD154 Supplying of special moulded variety PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments to walk site etc. complete. 25mm dia PVC couplers Each 12.0 12.0 4.0 False None None False None False 48.0 0 2978862 98795 None KSHD155 Supplying of special moulded variety PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments to walk site etc. complete. 32mm dia PVC couplers Each 16.0 16.0 4.0 False None None False None False 64.0 0 2978863 98795 None KSHD156 Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 25mm dia PVC Elbows Each 16.0 16.0 4.0 False None None False None False 64.0 0 2978864 98795 None KSHD157 Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 32mm dia PVC Elbows Each 21.0 21.0 4.0 False None None False None False 84.0 0 2978865 98795 None KSHD158 Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 25mm dia PVC Bend Each 24.0 24.0 3.0 False None None False None False 72.0 0 2978866 98795 None KSHD159 Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 32mm dia PVC Bend Each 36.0 36.0 3.0 False None None False None False 108.0 0 2978867 98795 None KSHD160 Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 25mm dia PVC Tee Each 21.0 21.0 2.0 False None None False None False 42.0 0 2978868 98795 None KSHD161 Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 32mm dia PVC Tee Each 32.0 32.0 2.0 False None None False None False 64.0 0 2978869 98795 None KSHD162 Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 110mm dia PVC Tee Each 251.0 251.0 2.0 False None None False None False 502.0 0 2978870 98795 None KSHD163 Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 75mm dia PVC Tee Each 117.0 117.0 2.0 False None None False None False 234.0 0 2978871 98795 None KSHD164 Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete. 110mm Dia Rmtr 505.0 505.0 10.0 False None None False None False 5050.0 0 2978872 98795 None KSHD165 Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete. 75mm Dia PVC Pipe Rmtr 264.0 264.0 10.0 False None None False None False 2640.0 0 2978873 98795 None KSHD166 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), confoRmtring to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid Each 5977.0 5977.0 3.0 False None None False None False 17931.0 0 2978874 98795 None KSHD167 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap Each 2561.0 2561.0 2.0 False None None False None False 5122.0 0 2978875 98795 None KSHD168 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: using White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer Each 4121.0 4121.0 1.0 False None None False None False 4121.0 0 2978876 98795 None KSHD169 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Each 1220.0 1220.0 2.0 False None None False None False 2440.0 0 2978877 98795 None KSHD170 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. Each 145.0 145.0 2.0 False None None False None False 290.0 0 2978878 98795 None KSHD171 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 g. Each 478.0 478.0 3.0 False None None False None False 1434.0 0 2978879 98795 None KSHD172 Providing and fixing 100 mm sand cast Iron grating for gully trap. Each 47.0 47.0 2.0 False None None False None False 94.0 0 2978880 98795 None KSHD173 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay (non modular) bricks of class designation 3.5 Each 5642.0 5642.0 2.0 False None None False None False 11284.0 0 2978881 98795 None KSHD174 SECURITY BLOCK - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. (Excavation Payable for Footing Area Only) In all kinds of soils Depth upto 3 m CUBIC METER 102.0 102.0 5.29 False None None False None False 539.58 0 2978882 98795 None KSHD175 Earth work excavation for Foundation by mechanical means for all works & depth upto 1.5 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting upto 1.5 m depth\ CUBIC METER 363.0 363.0 4.18 False None None False None False 1517.34 0 2978883 98795 None KSHD176 Earth work excavation for Foundation by mechanical means for all works & depth upto 1.5 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work Depth exceeding 1.5 m, but not exceeding 3 m CUBIC METER 425.0 425.0 3.7 False None None False None False 1572.5 0 2978884 98795 None KSHD177 Earth work excavation for FOUNDATION by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including cost of explosives, dressing of excavated surfaces, disposing off or levelling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, blasting materials, tools, usage of Machinery & all other appurtenaces required to complete the work. (Excavation Payable for Footing Area Only)In Hard Rock ( requiring blasting) Depth upto 1.50m CUBIC METER 554.0 554.0 10.0 False None None False None False 5540.0 0 2978885 98795 None KSHD178 Earth work excavation for FOUNDATION by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including cost of explosives, dressing of excavated surfaces, disposing off or levelling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, blasting materials, tools, usage of Machinery & all other appurtenaces required to complete the work. (Excavation Payable for Footing Area Only)Depth exceeding 1.5 m, but not exceeding 3 m CUBIC METER 623.0 623.0 10.0 False None None False None False 6230.0 0 2978886 98795 None KSHD179 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. CUBIC METER 266.0 266.0 10.24 False None None False None False 2723.84 0 2978887 98795 None KSHD180 Providing and injecting chemical emulsion for Pre-constructional Anti-TeRmtrite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/Sqm including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. Sqm 118.0 118.0 11.9716 False None None False None False 1412.6488 0 2978888 98795 None KSHD181 Providing and Filling in foundation with granite / trap broken metal 100mm. And down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift complete as per specifications. CUBIC METER 2682.0 2682.0 1.95 False None None False None False 5229.9 0 2978889 98795 None KSHD182 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost including Centering and shuttering but excluding steel reinforcement) Mix 1:5:10 Using 40 mm nominal size graded crushed coarse aggregates CUBIC METER 5338.0 5338.0 10.0 False None None False None False 53380.0 0 2978890 98795 None KSHD183 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost including Centering and shuttering but excluding steel reinforcement)Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates CUBIC METER 5664.0 5664.0 1.95 False None None False None False 11044.8 0 2978891 98795 None KSHD184 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications.(The cost including Centering and shuttering but excluding steel reinforcement)Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates CUBIC METER 6217.0 6217.0 10.0 False None None False None False 62170.0 0 2978892 98795 None KSHD185 Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost including Centering and shuttering but excluding steel reinforcement) CUBIC METER0 Design Mix Using 20 mm nominal size graded crushed coarse aggregates CUBIC METER 6605.0 6605.0 10.0 False None None False None False 66050.0 0 2978893 98795 None KSHD186 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confiRmtring to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & foRmtrwork to be paid separately)CUBIC METER0 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Footing CUBIC METER 7281.0 7281.0 0.85 False None None False None False 6188.85 0 2978894 98795 None KSHD187 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confiRmtring to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & foRmtrwork to be paid separately)CUBIC METER0 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Column/Pedastrals CUBIC METER 11461.4 11461.4 0.31 False None None False None False 3553.034 0 2978895 98795 None KSHD188 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confiRmtring to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & foRmtrwork to be paid separately)CUBIC METER0 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Plinth Beam CUBIC METER 10510.5 10510.5 0.68 False None None False None False 7147.14 0 2978896 98795 None KSHD189 Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confiRmtring to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost including Centering and shuttering but excluding steel reinforcement) Ground Floor Column CUBIC METER 11911.9 11911.9 0.68 False None None False None False 8100.092 0 2978897 98795 None KSHD190 Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confiRmtring to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost including Centering and shuttering but excluding steel reinforcement) Ground Floor Roof Beam & Lintel. CUBIC METER 11211.2 11211.2 0.76 False None None False None False 8520.512 0 2978898 98795 None KSHD191 Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confiRmtring to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost including Centering and shuttering but excluding steel reinforcement) Ground Floor Roof Slab and Staircase CUBIC METER 10510.5 10510.5 2.47 False None None False None False 25960.935 0 2978899 98795 None KSHD192 Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confiRmtring to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost including Centering and shuttering but excluding steel reinforcement) Ground Floor Sunshade CUBIC METER 10610.15 10610.15 0.97 False None None False None False 10291.8455 0 2978900 98795 None KSHD193 Providing TheRmtro-Mechanically Treated bars of grade Fe-550 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) Kg 96.0 96.0 922.06 False None None False None False 88517.76 0 2978901 98795 None KSHD194 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. CUBIC METER 7978.0 7978.0 0.83 False None None False None False 6621.74 0 2978902 98795 None KSHD195 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. CUBIC METER 7969.0 7969.0 4.7 False None None False None False 37454.3 0 2978903 98795 None KSHD196 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 323.0 323.0 35.92 False None None False None False 11602.16 0 2978904 98795 None KSHD197 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 312.0 312.0 24.87 False None None False None False 7759.44 0 2978905 98795 None KSHD198 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 354.0 354.0 34.61 False None None False None False 12251.94 0 2978906 98795 None KSHD199 Providing and fixing suitable plaster mesh 150mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/Sqm width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment Rmtr 38.0 38.0 100.0 False None None False None False 3800.0 0 2978907 98795 None KSHD200 FoRmtring groove of unifoRmtr size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. m 52.0 52.0 50.0 False None None False None False 2600.0 0 2978908 98795 None KSHD201 Providing and laying Cement concrete flooring 40 mm thick with 20 mm nominal size stone aggregate using 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry complete. Sqm 451.0 451.0 1.0 False None None False None False 451.0 0 2978909 98795 None KSHD202 Providing White washing with lime to give an even shade :New work (three coats) with lime of approved quality, including cost of materials, labour complete as per specifications and as per directions of Engineer- in-charge. Sqm 26.0 26.0 35.92 False None None False None False 933.92 0 2978910 98795 None KSHD203 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 Sqm) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 174.0 174.0 34.61 False None None False None False 6022.14 0 2978911 98795 None KSHD204 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 Sqm over and including one coat of Special primer applied @ 0.75 L/10 Sqm with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life) Sqm 158.0 158.0 24.87 False None None False None False 3929.46 0 2978912 98795 None KSHD205 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and confoRmtring to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ Sqm including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm. Sqm 1238.0 1238.0 9.0 False None None False None False 11142.0 0 2978913 98795 None KSHD206 Providing & fixing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement: 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete. Sqm 565.0 565.0 16.435 False None None False None False 9285.775 0 2978914 98795 None KSHD207 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications. CUBIC METER 2017.0 2017.0 1.6435 False None None False None False 3314.9395 0 2978915 98795 None KSHD208 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 Sqm over an under coat of primer applied @0.75 ltr/10 Sqm of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 138.0 138.0 3.78 False None None False None False 521.64 0 2978916 98795 None KSHD209 Providing and laying flooring and steps machine cut granite slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with ce- ment mortar 1:3 over existing cement concrete bed , including cost of materials, mortar labour, curing complete as per specifications. Sqm 4279.0 4279.0 1.08 False None None False None False 4621.32 0 2978917 98795 None KSHD210 Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(TheRmtro Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having a overall size of 60mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm X 58mm with GI reinforcement of 1mm for the frame and 1.5 mm for the sash. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2-2.5 mm. Maximum possible size - 1819mm x 1819mm (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 5390.0 5390.0 10.8 False None None False None False 58212.0 0 2978918 98795 None KSHD211 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol foRmtraldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 35 mm thick both side Teak Sqm 4532.0 4532.0 1.89 False None None False None False 8565.48 0 2978919 98795 None KSHD212 Providing Teak wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications. CUBIC METER 235649.0 235649.0 0.08 False None None False None False 18851.92 0 2978920 98795 None KSHD213 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Kg 168.0 168.0 60.0 False None None False None False 10080.0 0 2978921 98795 None KSHD214 Supplying PVC ringtite pipes confoRmtring to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for:PVC pipes 110mm dia., 6 kg/sqcm & class 3 Rmtr 411.0 411.0 8.0 False None None False None False 3288.0 0 1710066793000 0 None None Buildings INFRASTRUCTURE WORKS 1339531.97 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2978922 98796 None KSHD215 ROAD WORK - Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction Cum 105.0 105.0 62.4 False None None False None False 6552.0 0 2978923 98796 None KSHD216 Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in unifoRmtr layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401- Grading -I Material Cum 2488.0 2488.0 62.4 False None None False None False 155251.2 0 2978924 98796 None KSHD217 Wet Mix Macadam (Plant Mix Method) Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in unifoRmtr layers with paver/ grader in sub-base / base course onwell prepared surface and compacting with vibratory roller to achieve the desired density. Cum 2559.0 2559.0 54.08 False None None False None False 138390.72 0 2978925 98796 None KSHD218 Prime Coat over WMM/WBM: Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg per Sqm using mechanical means Sqm 41.0 41.0 416.0 False None None False None False 17056.0 0 2978926 98796 None KSHD219 Tack coat on Bituminous surface: Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/Sqm on the prepared bituminous surface cleaned with mechanical broom Sqm 12.0 12.0 416.0 False None None False None False 4992.0 0 2978927 98796 None KSHD220 Dense Graded Bituminous macadam Grading - i for traffic less than 20 mSa Providing and laying Dense Graded Bituminous Macadam with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30, @ 4.0 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with mechanical paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. Cum 8856.0 8856.0 29.12 False None None False None False 257886.72 0 2978928 98796 None KSHD221 Bituminous Concrete Grading i for traffic greater than 20 mSa Providing and laying Bituminous Concrete with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.2 per cent of mix and filler, transporting the hot mix to work site, laying with mechanical paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects Cum 11002.0 11002.0 12.48 False None None False None False 137304.96 0 2978929 98796 None KSHD222 PAVER BLOCK - Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in unifoRmtr layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401- Grading -I Material Cum 2360.0 2360.0 8.25 False None None False None False 19470.0 0 2978930 98796 None KSHD223 Precast Cement Concrete interlocking Blocks Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, laid in required pattern and including over 30mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (WMM/WBM Base to be paid separately if necessary as per relevant technical specification) Sqm 1068.0 1068.0 55.0 False None None False None False 58740.0 0 2978931 98796 None KSHD224 STORmtr WATER DRAIN - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. (Excavation Payable for Footing Area Only) In all kinds of soils Depth upto 3 m CUBIC METER 102.0 102.0 10.0 False None None False None False 1020.0 0 2978932 98796 None KSHD225 Earth work excavation for Foundation by mechanical means for all works & depth upto 1.5 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting upto1.5 m depth CUBIC METER 363.0 363.0 82.23 False None None False None False 29849.49 0 2978933 98796 None KSHD226 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. CUBIC METER 266.0 266.0 24.2 False None None False None False 6437.2 0 2978934 98796 None KSHD227 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & including Centering and shuttering) Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates CUBIC METER 5664.0 5664.0 6.05 False None None False None False 34267.2 0 2978935 98796 None KSHD228 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confiRmtring to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & including Centering and shuttering) CUBIC METER0 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Slab CUBIC METER 10510.5 10510.5 7.425 False None None False None False 78040.4625 0 2978936 98796 None KSHD229 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confiRmtring to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & including Centering and shuttering) CUBIC METER0 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Wall CUBIC METER 11461.4 11461.4 7.425 False None None False None False 85100.895 0 2978937 98796 None KSHD230 Providing TheRmtro-Mechanically Treated bars of grade Fe-550 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) Kg 96.0 96.0 1633.5 False None None False None False 156816.0 0 2978938 98796 None KSHD231 SUMP - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. (Excavation Payable for Footing Area Only) In all kinds of soils Depth upto 3 m CUBIC METER 102.0 102.0 10.0 False None None False None False 1020.0 0 2978939 98796 None KSHD232 Earth work excavation for Foundation by mechanical means for all works & depth upto 1.5 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting upto1.5 m depth CUBIC METER 363.0 363.0 16.36 False None None False None False 5938.68 0 2978940 98796 None KSHD233 Earth work excavation for Foundation by mechanical means for all works & depth upto 1.5 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work Depth exceeding 1.5 m, but not exceeding 3 m CUBIC METER 425.0 425.0 2.73 False None None False None False 1160.25 0 2978941 98796 None KSHD234 Earth work excavation for FOUNDATION by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including cost of explosives, dressing of excavated surfaces, disposing off or levelling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, blasting materials, tools, usage of Machinery & all other appurtenaces required to complete the work. (Excavation Payable for Footing Area Only)In Hard Rock ( requiring blasting) Depth upto 1.50m CUBIC METER 554.0 554.0 10.0 False None None False None False 5540.0 0 2978942 98796 None KSHD235 Earth work excavation for FOUNDATION by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including cost of explosives, dressing of excavated surfaces, disposing off or levelling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, blasting materials, tools, usage of Machinery & all other appurtenaces required to complete the work. (Excavation Payable for Footing Area Only)Depth exceeding 1.5 m, but not exceeding 3 m CUBIC METER 623.0 623.0 10.0 False None None False None False 6230.0 0 2978943 98796 None KSHD236 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. CUBIC METER 266.0 266.0 4.51 False None None False None False 1199.66 0 2978944 98796 None KSHD237 Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift complete as per specifications. CUBIC METER 2682.0 2682.0 0.96 False None None False None False 2574.72 0 2978945 98796 None KSHD238 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & including Centering and shuttering) Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates CUBIC METER 5664.0 5664.0 0.96 False None None False None False 5437.44 0 2978946 98796 None KSHD239 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confiRmtring to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & including Centering and shuttering) CUBIC METER0 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Slab CUBIC METER 10510.5 10510.5 2.82 False None None False None False 29639.61 0 2978947 98796 None KSHD240 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confiRmtring to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & including Centering and shuttering) CUBIC METER0 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Wall CUBIC METER 11461.4 11461.4 4.2 False None None False None False 48137.88 0 2978948 98796 None KSHD241 Providing TheRmtro-Mechanically Treated bars of grade Fe-550 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) Kg 96.0 96.0 447.03 False None None False None False 42914.88 0 2978949 98796 None KSHD242 Supplying and fixing SFRC frame and cover confoRmtring to IS 12592 (partI)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fixing the cover in C.C. 1:2:4 and C.M. 1:3 plastering 20 mm thick to all exposed faces, curing for 10 days with all lead and lift with appurtenances. complete Nos 2564.0 2564.0 1.0 False None None False None False 2564.0 0 1710066793000 0 None None Buildings ELECTRICAL WORKS 11135720.56 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2978950 98797 None KSHD243 ELECTRICAL - Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confiRmtring to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws.19/20 mm dia 2 mm thick Mtr 69.0 69.0 50.0 False None None False None False 3450.0 0 2978951 98797 None KSHD244 Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary 25 mm dia 2 mm thick Mtr 81.0 81.0 603.0 False None None False None False 48843.0 0 2978952 98797 None KSHD245 Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary 32 mm dia 2.5 mm thick Mtr 106.0 106.0 1496.0 False None None False None False 158576.0 0 2978953 98797 None KSHD246 Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary 40 mm dia 2.5 mm thick Mtr 149.0 149.0 50.0 False None None False None False 7450.0 0 2978954 98797 None KSHD247 Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary 25 mm dia 2 mm thick Mtr 79.0 79.0 25.0 False None None False None False 1975.0 0 2978955 98797 None KSHD248 Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary 32 mm dia 2.5 mm thick Mtr 99.0 99.0 25.0 False None None False None False 2475.0 0 2978956 98797 None KSHD249 Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary 40 mm dia 2.5 mm thick Mtr 139.0 139.0 25.0 False None None False None False 3475.0 0 2978957 98797 None KSHD250 Supplying and fixing PVC/metal conduit Deep junction box 25 mm deep Junction box Nos 56.0 56.0 177.0 False None None False None False 9912.0 0 2978958 98797 None KSHD251 Supplying and fixing PVC/metal conduit Deep junction box 32 mm deep Junction box Nos 61.0 61.0 15.0 False None None False None False 915.0 0 2978959 98797 None KSHD252 Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete upto 50 mm conduit in brick wall Mtr 29.0 29.0 10.0 False None None False None False 290.0 0 2978960 98797 None KSHD253 Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete upto 50 mm conduit CC Floor Mtr 69.0 69.0 5.0 False None None False None False 345.0 0 2978961 98797 None KSHD254 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mSqm (Phase & Neutral) & 1x1.0 mSqm (Earth wire) FRLS multi strand PVC insulated copper wire (confiRmtring to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be teRmtrinated with sufficient loose length in a wood/PVC round block. complete for Each outlet Short point upto 3m from tapping point to out let via switch box Point 269.0 269.0 9.0 False None None False None False 2421.0 0 2978962 98797 None KSHD255 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mSqm (Phase & Neutral) & 1x1.0 mSqm (Earth wire) FRLS multi strand PVC insulated copper wire (confiRmtring to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be teRmtrinated with sufficient loose length in a wood/PVC round block. complete for Each outlet Medium point above 3m upto 6m from tapping point to out let via switch box Point 379.0 379.0 15.0 False None None False None False 5685.0 0 2978963 98797 None KSHD256 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mSqm (Phase & Neutral) & 1x1.0 mSqm (Earth wire) FRLS multi strand PVC insulated copper wire (confiRmtring to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be teRmtrinated with sufficient loose length in a wood/PVC round block. complete for Each outlet Long point above 6m upto 10m from tapping point to out let via switch box Point 555.0 555.0 153.0 False None None False None False 84915.0 0 2978964 98797 None KSHD257 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 1 mSqm Mtr 19.0 19.0 50.0 False None None False None False 950.0 0 2978965 98797 None KSHD258 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 1.5 mSqm Mtr 26.0 26.0 705.24 False None None False None False 18336.24 0 2978966 98797 None KSHD259 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 2.5 mSqm Mtr 42.0 42.0 705.24 False None None False None False 29620.08 0 2978967 98797 None KSHD260 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 4 mSqm Mtr 63.0 63.0 705.24 False None None False None False 44430.12 0 2978968 98797 None KSHD261 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete 10-12 Way Nos 261.0 261.0 48.0 False None None False None False 12528.0 0 2978969 98797 None KSHD262 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete 16-18 Way Nos 294.0 294.0 3.0 False None None False None False 882.0 0 2978970 98797 None KSHD263 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box 10-12 Module Nos 344.0 344.0 48.0 False None None False None False 16512.0 0 2978971 98797 None KSHD264 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box 16-18 Module Nos 457.0 457.0 3.0 False None None False None False 1371.0 0 2978972 98797 None KSHD265 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6A One Way Switch Nos 102.0 102.0 249.0 False None None False None False 25398.0 0 2978973 98797 None KSHD266 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6A Two Way Switch Nos 166.0 166.0 1.0 False None None False None False 166.0 0 2978974 98797 None KSHD267 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6A Three Way socket Nos 171.0 171.0 72.0 False None None False None False 12312.0 0 2978975 98797 None KSHD268 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 16A One Way Switch Nos 180.0 180.0 24.0 False None None False None False 4320.0 0 2978976 98797 None KSHD269 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6/16A Universal Socket Nos 236.0 236.0 24.0 False None None False None False 5664.0 0 2978977 98797 None KSHD270 Supplying and fixing of metal clad industrial plugs and sockets 2pole+earth 250V PLUG 10A Nos 214.0 214.0 12.0 False None None False None False 2568.0 0 2978978 98797 None KSHD271 Supplying and fixing of metal clad industrial plugs and sockets 2pole+earth 250V PLUG 20A Nos 220.0 220.0 12.0 False None None False None False 2640.0 0 2978979 98797 None KSHD272 Supplying and fixing of metal clad industrial plugs and sockets 3pole+earth 440V PLUG 20A Nos 280.0 280.0 12.0 False None None False None False 3360.0 0 2978980 98797 None KSHD273 Supplying and fixing of metal clad industrial plugs and sockets 3pole+earth 440V PLUG 30A Nos 367.0 367.0 12.0 False None None False None False 4404.0 0 2978981 98797 None KSHD274 Supplying and fixing of metal clad industrial plugs and sockets 2pole+earth 250V SOCKET 10A Nos 217.0 217.0 12.0 False None None False None False 2604.0 0 2978982 98797 None KSHD275 Supplying and fixing of metal clad industrial plugs and sockets 2pole+earth 250V SOCKET 20A Nos 259.0 259.0 12.0 False None None False None False 3108.0 0 2978983 98797 None KSHD276 Supplying and fixing of metal clad industrial plugs and sockets 3pole+earth 440V SOCKET 20A Nos 273.0 273.0 12.0 False None None False None False 3276.0 0 2978984 98797 None KSHD277 Supplying and fixing of metal clad industrial plugs and sockets 3pole+earth 440V SOCKET 30A Nos 297.0 297.0 12.0 False None None False None False 3564.0 0 2978985 98797 None KSHD278 Fabricating, supplying and erection of ... ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, including suitable boards, Bakelite sheet and MCBs as per IS specifications suitable to withstand the wind speed of 47 m/s for .......m Pole in single section and single joint welded as per IS 9595/IS10178AWS having dimensions bottom ..... mm , top.... mm with 3 mm thick, suitable base plate and 4Nos of ..... long J bolts along with template and the Pole shall be hot dip galvanized in single dipping with not less than 65micron as per ASTM-A123 and 153 etc., (excluding foundation) as per drawing appended 8 m - Top 70 mm and Bottom 135 mm dia Nos 15500.0 15500.0 9.0 False None None False None False 139500.0 0 2978986 98797 None KSHD279 Supplying, and fixing of Hot dip Galvanized M.S.Bracketsuitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete Single ARmtr Bracket with 1500 mm Standard 40/50 mm dia Nos 1844.0 1844.0 9.0 False None None False None False 16596.0 0 2978987 98797 None KSHD280 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal theRmtral dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT Greater than 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire Greater than IK08. Power Factor Greater than 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency Greater than 1301m/w, nominal CRI Greater than 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned LED Streetlight 70W Nos 5992.0 5992.0 7.0 False None None False None False 41944.0 0 2978988 98797 None KSHD281 Supplying of 80W Industrial Range Light with following specifications. System lumen output - 9400 lm, System efficacy of 110 lm/W, Housing : Pressure Die Cast Aluminium with PC lens as Optics with toughened glass, Rated system life of 50,000BH, CCT - 5700K and CRI Greater than 70, Protection: IP66 , IK 07 &THD Less than10% , PF Greater than 0.95, Opr Temp : -10 degree C to +45 degree C, Opr Voltage range: 140 V - 270 V etc., complete a) LUMINAIRE MAKE : Phillips / GE-Venture / Crompton / Wipro / Bajaj / Havells / Halonix/Jaquar /HPL/ GM / GreenLites / Gold Medal/Eveready/ FortuneArrt b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/Everlight. Nos 4650.0 4650.0 147.0 False None None False None False 683550.0 0 2978989 98797 None KSHD282 Supplying & fixing of Surface mounting type retrofit type -LED tube ....... W comprising of LED linear source with CCT 6500 degree K, CRI Greater than 70%. efficacy Greater than 80 lumen per W, life Greater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF greater than 0.95, power loss should less than 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition 18W-20W (T8) Nos 330.0 330.0 30.0 False None None False None False 9900.0 0 2978990 98797 None KSHD283 Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clA On wall/ ceiling / Rafter / Girders Nos 122.0 122.0 147.0 False None None False None False 17934.0 0 2978991 98797 None KSHD284 TECHNICIAN SHED ELECTRICAL - Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confiRmtring to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 25 mm dia 2 mm thick Mtr 78.0 78.0 93.0 False None None False None False 7254.0 0 2978992 98797 None KSHD285 Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confiRmtring to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 32 mm dia 2.5 mm thick Mtr 103.0 103.0 101.86 False None None False None False 10491.58 0 2978993 98797 None KSHD286 Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary 25 mm dia 2 mm thick Mtr 79.0 79.0 5.0 False None None False None False 395.0 0 2978994 98797 None KSHD287 Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary 32 mm dia 2.5 mm thick Mtr 99.0 99.0 8.0 False None None False None False 792.0 0 2978995 98797 None KSHD288 Supplying and fixing PVC/metal conduit Deep junction box 25 mm deep Junction box Nos 56.0 56.0 13.0 False None None False None False 728.0 0 2978996 98797 None KSHD289 Supplying and fixing PVC/metal conduit Deep junction box 32 mm deep Junction box Nos 61.0 61.0 4.0 False None None False None False 244.0 0 2978997 98797 None KSHD290 Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete upto 50 mm conduit in brick wall Mtr 29.0 29.0 93.0 False None None False None False 2697.0 0 2978998 98797 None KSHD291 Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete upto 50 mm conduit CC floor Mtr 69.0 69.0 5.0 False None None False None False 345.0 0 2978999 98797 None KSHD292 Point wiring using Copper wire without switch Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mSqm (Phase & Neutral) & 1x1.0 mSqm (Earth wire) FRLS multi strand PVC insulated copper wire (confiRmtring to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be teRmtrinated with sufficient loose length in a wood/PVC round block. complete for Each outlet Short point upto 3m from tapping point to out let via switch box Point 269.0 269.0 3.0 False None None False None False 807.0 0 2979000 98797 None KSHD293 Point wiring using Copper wire without switch Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mSqm (Phase & Neutral) & 1x1.0 mSqm (Earth wire) FRLS multi strand PVC insulated copper wire (confiRmtring to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be teRmtrinated with sufficient loose length in a wood/PVC round block. complete for Each outlet Medium point above 3m upto 6m from tapping point to out let via switch box Point 379.0 379.0 3.0 False None None False None False 1137.0 0 2979001 98797 None KSHD294 Point wiring using Copper wire without switch Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mSqm (Phase & Neutral) & 1x1.0 mSqm (Earth wire) FRLS multi strand PVC insulated copper wire (confiRmtring to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be teRmtrinated with sufficient loose length in a wood/PVC round block. complete for Each outlet Long point above 6m upto 10m from tapping point to out let via switch box Point 555.0 555.0 16.0 False None None False None False 8880.0 0 2979002 98797 None KSHD295 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 1 mSqm Mtr 19.0 19.0 5.0 False None None False None False 95.0 0 2979003 98797 None KSHD296 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 1.5 mSqm Mtr 26.0 26.0 107.38 False None None False None False 2791.88 0 2979004 98797 None KSHD297 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 2.5 mSqm Mtr 42.0 42.0 107.38 False None None False None False 4509.96 0 2979005 98797 None KSHD298 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 4 mSqm Mtr 63.0 63.0 107.38 False None None False None False 6764.94 0 2979006 98797 None KSHD299 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete 10-12 Way Nos 261.0 261.0 14.0 False None None False None False 3654.0 0 2979007 98797 None KSHD300 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box 10-12 Module Nos 344.0 344.0 1.0 False None None False None False 344.0 0 2979008 98797 None KSHD301 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6A One Way Switch Nos 102.0 102.0 34.0 False None None False None False 3468.0 0 2979009 98797 None KSHD302 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6A Two Way Switch Nos 166.0 166.0 1.0 False None None False None False 166.0 0 2979010 98797 None KSHD303 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6A Three Way socket Nos 171.0 171.0 15.0 False None None False None False 2565.0 0 2979011 98797 None KSHD304 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 16A One Way Switch Nos 170.0 170.0 5.0 False None None False None False 850.0 0 2979012 98797 None KSHD305 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6/16A Universal Socket Nos 236.0 236.0 5.0 False None None False None False 1180.0 0 2979013 98797 None KSHD306 Supplying and fixing of metal clad industrial plugs and sockets 2pole+earth 250V PLUG 10A Nos 214.0 214.0 2.0 False None None False None False 428.0 0 2979014 98797 None KSHD307 Supplying and fixing of metal clad industrial plugs and sockets 2pole+earth 250V PLUG 20A Nos 220.0 220.0 2.0 False None None False None False 440.0 0 2979015 98797 None KSHD308 Supplying and fixing of metal clad industrial plugs and sockets 3pole+earth 440V PLUG 20A Nos 280.0 280.0 2.0 False None None False None False 560.0 0 2979016 98797 None KSHD309 Supplying and fixing of metal clad industrial plugs and sockets 3pole+earth 440V PLUG 30A Nos 367.0 367.0 2.0 False None None False None False 734.0 0 2979017 98797 None KSHD310 Supplying and fixing of metal clad industrial plugs and sockets 2pole+earth 250V SOCKET 10A Nos 217.0 217.0 2.0 False None None False None False 434.0 0 2979018 98797 None KSHD311 Supplying and fixing of metal clad industrial plugs and sockets 2pole+earth 250V SOCKET 20A Nos 259.0 259.0 2.0 False None None False None False 518.0 0 2979019 98797 None KSHD312 Supplying and fixing of metal clad industrial plugs and sockets 3pole+earth 440V SOCKET 20A Nos 273.0 273.0 2.0 False None None False None False 546.0 0 2979020 98797 None KSHD313 Supplying and fixing of metal clad industrial plugs and sockets 3pole+earth 440V SOCKET 30A Nos 297.0 297.0 2.0 False None None False None False 594.0 0 2979021 98797 None KSHD314 Fabricating, supplying and erection of ... ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, including suitable boards, Bakelite sheet and MCBs as per IS specifications suitable to withstand the wind speed of 47 m/s for .......m Pole in single section and single joint welded as per IS 9595/IS10178AWS having dimensions bottom ..... mm , top.... mm with 3 mm thick, suitable base plate and 4Nos of ..... long J bolts along with template and the Pole shall be hot dip galvanized in single dipping with not less than 65micron as per ASTM-A123 and 153 etc., (excluding foundation) as per drawing appended 8 m - Top 70 mm and Bottom 135 mm dia Nos 15500.0 15500.0 1.0 False None None False None False 15500.0 0 2979022 98797 None KSHD315 Supplying, and fixing of Hot dip Galvanized M.S.Bracketsuitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete Single ARmtr Bracket with 1500 mm Standard 40/50 mm dia Nos 1844.0 1844.0 1.0 False None None False None False 1844.0 0 2979023 98797 None KSHD316 Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power input 48 W +/- 10 %, Rated current As per IS:374/79, Rated power factor 0.9 lagging(min), Rated speed 350 +/- 10% RPM, Rated air delivery 210 +/- 10% Cubic Mtr Minimum, Rated service value 4.2 CMM / W, Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201, as per IS specification, Motor winding. Temp rise Shall not exceed 75 deg C over and ambient of 40 0C by resistance method at 245 V, Insulation resistance Shall not be less than Two Mega Ohms (2M Ohms), Leakage current Should not exceed 210 Micro Amp, Power input, W& current, Air Delivery & Fan Speed as per IS:374/1979 with latest amendment, 2 year manufacturer Warranty 48" Sweep 5 Star (1200 mm) Nos 2677.0 2677.0 4.0 False None None False None False 10708.0 0 2979024 98797 None KSHD317 Supplying wall mounting fan suitable to operate at single phase 230v AC. supply 400 mm Sweep Nos 3212.0 3212.0 3.0 False None None False None False 9636.0 0 2979025 98797 None KSHD318 Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete 12" Sweep (300 mm) Nos 2969.0 2969.0 2.0 False None None False None False 5938.0 0 2979026 98797 None KSHD319 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal theRmtral dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT Greater than 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire Greater than IK08. Power Factor Greater than 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency Greater than 1301m/w, nominal CRI Greater than 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned LED Streetlight 70W Nos 5992.0 5992.0 1.0 False None None False None False 5992.0 0 2979027 98797 None KSHD320 Supplying & fixing of Surface mounting type retrofit type -LED tube ....... W comprising of LED linear source with CCT 6500 degree K, CRI greater than 70%. efficacy greater than 80 lumen per W, life Greater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF greater than 0.95, power loss should less than 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition 18W-20W (T8) Nos 330.0 330.0 13.0 False None None False None False 4290.0 0 2979028 98797 None KSHD321 Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL /LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clA On wall/ ceiling / Rafter / Girders Nos 122.0 122.0 13.0 False None None False None False 1586.0 0 2979029 98797 None KSHD322 DIESEL GENERATOR - Supplying, installing, testing and commissioning of 160 kVA/120 kW Diesel Generator set with following specifications. Power rating as per standard reference condition as per-BS 5514/ISO 3046/ ISO 8528 & IS 1002/ISO 3046 Generator set specification. Engine: Diesel generating set are rated at 1500RPM and confoRmtr to ISO 8528 specifications. The engines are radiator cooled, four stroke and multi cylinder, confoRmtring to ISO 3046. The scope of supply includes: Electrical starter motor12V DC Battery charging alternator, Bosch fuel system with mechanical governor, A1 Class. Spin-on lube oil filter, Spin-on dual fuel filter with water separator, Turbocharger, Charge air cooler, Silencer (Hospital grade), Dry type air cleaner, Shutoff coil, Flywheel and flywheel housing, First fill of lube oil and coolant, Safety for low lube oil pressure, Safety for high water temperature, PeRmtrissible overload of 10% for one hour in 12 hours of operation. Capacity of Fuel Tank: Fuel tank suitable for 8 hours of operation. Alternator: Alternator is suitable for operation at 1500 RPM, 415 V, 0.8 pf (lag) suitable for 50 Hz, 3 phase, 4 wire systems, confoRmtring to IS/IEC 60034-1. The Alternator is brush less type, screen protected, revolving field, self excited, self regulated through an AVR. The alternator shall have plus or minus 1.0% Voltage regulation (max) in static conditions- IP: 23 protections with insulation class F&H.Control Panel: The control panel is manufactured with 14/16 gauge CRCA sheet and is powder coated for weather-proof and long lasting finish. The control panel consists of the following parts:- PS0500 Controller, Aluminium bus bars with suitable capacity within/outgoing teRmtrinals, Indicating lA for 'Load On' and 'Set Running', Instrument fuses duly wired and ferruled, MCCB of suitable rating with overload and short circuit protections.Genset Controller: microprocessor based generator set monitoring and control system. The control provides a simple operator interface to the generator set, manual and remote start/ stop control, shutdown fault indication, and an LCD hour counter. The integration of all functions into a single control system provides enhanced reliability and perfoRmtrance compared to conventional generator set control systems. This control has been designed and tested to meet harsh environment in which gensets are typically applied. Features, Functions, protections 16 character x 2 line alphanumeric LCD display with LED Backlight.Operator interface, Provide a record of most recent fault conditions. Fault history stored in the control non volatile memory, Provide Alternator Data. Voltage (1 ph or 3 ph line to line and line to neutral voltage, Current (1 ph or 3 ph), kVA (3 ph and total), Frequency, Provide Engine Data, Starting battery voltage, Engine running hours, Engine Temp, Engine oil pressure, Control includes provision for Service adjustment and calibration of DG control functions, Voltage, frequency selection, Configurable input and output set up, Mtr calibration, Engine controls, Power Start operates on 12 VDC batteries,-Auto start mode accepts a ground signal from remote devices to automatically start the DG set The remote start will also wake up the control system from sleep mode.(for complete item description refer estimate document) Set 1447891.0 1447891.0 1.0 False None None False None False 1447891.0 0 2979030 98797 None KSHD323 Supply, Erection, testing and commissioning of AMF panel suitable for 180kVA DG set. The panel is of cubical type base/floor mounting control panel with hinged doors, undrilled bottom gland plate, aluminium Bus Bar with the accommodation for .A 4 pole contactor for alternator with theRmtral O/L relay,. A 4 pole contactor for mains, HRC fuse for short circuit protection, Microprocessor based AMF module with supply failure timer, Restoration timer, 3 impulse automatic engine start/stop logic, Mains/generator voltage, .capacity bypass switch and frequency sensing, PCC 1301controller with water temperature/Lube oil pressure/ engine speed, Voltage/ampere/Frequency/ kVA, Running-hour count, No of starts, Fault indication, over / under speed, Fails to start, Low oil pleasure, High engine temperature, Under/over voltage, over current, Earth fault relay, with indications for Mains on, Load on Mains, Battery charger on Push buttons AMF module by pass Mode, Battery charger unit with inbuilt Auto/Manual and Flat/Boost facility. The complete set shall have sufficient safety and adhere to NEC, NBC 2016, IEC, CPWD specifications, PCB noRmtrs and KSGEI Acts and Rule Set 141293.0 141293.0 2.0 False None None False None False 282586.0 0 2979031 98797 None KSHD324 TRANSFORmtrER -160 KVA Design, Supply, erection, testing and Commission of 11KV/433V, 160 kVA 3 phase HT TransfoRmtrer with Oil Temperature Indicator., Earthing teRmtrinals - 3 nos., Pre-filled Silica-gel breather. Lifting lugs for complete transfoRmtrer. TheRmtroMtr pocket., Oil filling pipe with cap on tank cover/conservator., HV TERmtrINALS with Porcelain Bushings, LV TERmtrINALS Indoor Type Porcelain Bushings with LT Cable box., Bi-metallic connectors on HT side., Oil level indicator on the Oil Conservator., 4 set of wheels for movement., Drain cum sampling valve - 1 no., Filter Valve with plug - 1 no., Pressure relief explosion vent with diaphragm, Externally operated off circuit tap changer switch with handle including all other accessories etc., complete Rating (KVA) -160 KVA No Load Voltage Ratio [KV] -11 / 0.433 KV Rated Current [Amp] -13.12 /333.35 Amps Vector Group -Dyn11 Tapping Range -+5% to -10% @ 2.5% Tap Changer -Off Circuit Tap Changer Steps -6 Steps, 7 Positions Temp. Rise (Oil/Wdg.) -40 / 45 degree C Insulation Level -HV & LV: UnifoRmtr. HV (KVp / KVRmtrs) -75 / 28 LV (KVp / KVRmtrs) -NA / 3 TERmtrINATION: H.V / L.V Cable Box / Cable Box Paint- Epoxy to Shade 631 of IS 5 Oil Temperature Indicator with A/T contacts Winding Temperature Indicator with A/T contacts Buchholz Relay with A/T contacts and with 1 Nos. Shut-off valves Marshalling Box Magnetic Oil Level Gauge with AlaRmtr Contact 1 No. Neutral CT of ratio 630 / 1A, 5P20, 15VA All following standard fittings will be provided in the transfoRmtrer Rating and teRmtrinal marking plate - 1No Earthing teRmtrinals - 2 Nos Lifting lugs - 2 Nos TheRmtroMtr pockets - 1No Air Release Device - 1No Bottom channels - 1Set Drain valve with plug at Bottom- 1No Filter valve with plug at top- 1No Oil conservator with drain plug- 1No Oil filling hole with cap in Conservator- 1No Plain oil level gauge- 1No Dehydrating silica gel breather- 1No Explosion vent with double diaphragm- 1No Bi-directional Flat Rollers- 4No Set 450000.0 450000.0 1.0 False None None False None False 450000.0 0 2979032 98797 None KSHD325 OUTER ELECTRICAL WORKS - Supply, Transportation unloading, installation, testing and commissioning of Main MV Panel comprising of the followings and including all other accessories etc., EB Incomer : 1 No 250A 4 Pole Draw out type ACB with O/C, S/C, U/V and E/F Relays DG Incomer: 1 No 250A 4 Pole Draw out type ACB with O/C, S/C, U/V and E/F Relays Busbar: 250A TPN Aluminium Busbars 35KA per 1 Sec. All the neutral busbars shall have half the capacity of phase busbars Outgoing : 3 Nos 100 A TPN MCCB with releases 2 No 160 A TPN MCCB with releases 1 No 200 A TPN MCCB with releases 1 No 250 A TPN MCCB with releases Interlocks: Mechanical type iterlocking with 2 locks and 1 key provided in the both incomers only one supply source can be operated at a time. Wall mounting type fabricated with 16 SWG CRCA sheet enclosure. Door and partition 18 SWG CRCA Sheet. The Panel shall be complete with suitable interconnections and earthing etc. All doors should have proper locking/ sealing arrangements. Set 525000.0 525000.0 1.0 False None None False None False 525000.0 0 2979033 98797 None KSHD326 Supply, Transportation unloading, installation, testing and commissioning of Refrigeration Panel-1 comprising of the followings and including all other accessories etc., Incomer : 1 No 250A TPN MCCB Outgoing : 13 No 40A TPN MCCB Bus bars: 250A TPN Aluminium Busbars 35KA per 1 Sec. All the neutral busbars shall have half the capacity of phase busbars Wall mounting type fabricated with 16 SWG CRCA sheet enclouser, Door and partition 18 SWG CRCA sheet. The Panel shall be complete with iterconnections and earthing etc., Set 245000.0 245000.0 1.0 False None None False None False 245000.0 0 2979034 98797 None KSHD327 Supply, Transportation unloading, installation, testing and commissioning of Lift Panel comprising of the followings and including all other accessories etc., Incomer : 1 No 160A TPN MCCB Outgoing : 4 No 63A TPN MCCB Bus bars: 160A TPN Aluminium Busbars 35KA per 1 Sec. All the neutral busbars shall have half the capacity of phase busbars Wall mounting type fabricated with 16 SWG CRCA sheet enclouser, Door and partition 18 SWG CRCA sheet. The Panel shall be complete with iterconnections and earthing etc., All door should have proper locking/ sealing arrnements. Set 60000.0 60000.0 1.0 False None None False None False 60000.0 0 2979035 98797 None KSHD328 Supply, Transportation unloading, installation, testing and commissioning of Vertical DB 8 Way comprising of the followings and including all other accessories etc., Incomer: 1 No 63A TPN MCCB Outgoing: 2 Nos 16/32A TPN MCB, 18 Nos 6/16A SP MCB The Panel shall be complete with iterconnections and earthing etc., Set 22000.0 22000.0 1.0 False None None False None False 22000.0 0 2979036 98797 None KSHD329 60 KVAR APFCR PANEL Supply, unloading, installation, testing and commissioning of floor mounting cubicle type APFC panel switch board fabricated out of 16 Swg CRCA and powder coated to Siemens gray shade. Make - Kabil Enterprises / CPRI Approved Panels / Equivalent approved by Engineer Incharge Set 125000.0 125000.0 1.0 False None None False None False 125000.0 0 2979037 98797 None KSHD330 Supplying and Fixing of 63A MCCB Isolator in a Metal enclousre for isolation of Refrigent unit near the HVAC Unit Set 750.0 750.0 12.0 False None None False None False 9000.0 0 2979038 98797 None KSHD331 Earthing with G.I. earth pipe 4.5 Mtr long, 40 mm dia including accessories , and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal / coke and salt as required. (Electrical DSR: Item No:5.2) Set 5087.96 5087.96 8.0 False None None False None False 40703.68 0 2979039 98797 None KSHD332 Earthing with G.I.earth plate 600 mm x 600 mm x 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 Mtr long etc.but with charcoal / coke and salt as required. (Electrical DSR: Item No:5.4) Set 5807.12 5807.12 4.0 False None None False None False 23228.48 0 2979040 98797 None KSHD333 Supplying and laying 25 mm x 5 mm copper strip at 0.50 Mtr below ground as strip earth electrode , including connection / teRmtrinating with nut , bolt, spring , washer etc.as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spached at 50mm) (Electrical SOR: Item No:5.8) Mtr 593.18 593.18 50.0 False None None False None False 29659.0 0 2979041 98797 None KSHD334 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required (Electrical SOR: Item No:5.17) Mtr 89.33 89.33 200.0 False None None False None False 17866.0 0 2979042 98797 None KSHD335 Supply and transportation of following XLPE insulated, 1100V grade aRmtroured alluminium cable as per specification confiRmtring to IS:7098 (Part - I)./1554-I Makes: Torent / Universal / Unicab / Havells / KEI / Gloster / Polycab /RR Kabel 3.5 core 185Sqmm Mtr 1948.0 1948.0 7.5 False None None False None False 14610.0 0 2979043 98797 None KSHD336 Supply and transportation of following XLPE insulated, 1100V grade aRmtroured alluminium cable as per specification confiRmtring to IS:7098 (Part - I)./1554-I Makes: Torent / Universal / Unicab / Havells / KEI / Gloster / Polycab /RR Kabel 31/2 x 95 Sqmm Mtr 1051.0 1051.0 89.0 False None None False None False 93539.0 0 2979044 98797 None KSHD337 Supply and transportation of following XLPE insulated, 1100V grade aRmtroured alluminium cable as per specification confiRmtring to IS:7098 (Part - I)./1554-I Makes: Torent / Universal / Unicab / Havells / KEI / Gloster / Polycab /RR Kabel 31/2 x 70 Sqmm Mtr 827.0 827.0 5.0 False None None False None False 4135.0 0 2979045 98797 None KSHD338 Supply and transportation of following XLPE insulated, 1100V grade aRmtroured alluminium cable as per specification confiRmtring to IS:7098 (Part - I)./1554-I Makes: Torent / Universal / Unicab / Havells / KEI / Gloster / Polycab /RR Kabel 31/2 x 35 Sqmm Mtr 520.0 520.0 2.5 False None None False None False 1300.0 0 2979046 98797 None KSHD339 Supply and transportation of following XLPE insulated, 1100V grade aRmtroured alluminium cable as per specification confiRmtring to IS:7098 (Part - I)./1554-I Makes: Torent / Universal / Unicab / Havells / KEI / Gloster / Polycab /RR Kabel 4 x 16 Sqmm Mtr 313.0 313.0 126.0 False None None False None False 39438.0 0 2979047 98797 None KSHD340 Supply and transportation of following XLPE insulated, 1100V grade aRmtroured alluminium cable as per specification confiRmtring to IS:7098 (Part - I)./1554-I Makes: Torent / Universal / Unicab / Havells / KEI / Gloster / Polycab /RR Kabel 4 x 10 Sqmm Mtr 262.0 262.0 470.0 False None None False None False 123140.0 0 2979048 98797 None KSHD341 Supply and transportation of following XLPE insulated, 1100V grade aRmtroured alluminium cable as per specification confiRmtring to IS:7098 (Part - I)./1554-I Makes: Torent / Universal / Unicab / Havells / KEI / Gloster / Polycab /RR Kabel 4 x 6 Sqmm Mtr 217.0 217.0 10.0 False None None False None False 2170.0 0 2979049 98797 None KSHD342 Supply and transportation of following XLPE insulated, 1100V grade aRmtroured alluminium cable as per specification confiRmtring to IS:7098 (Part - I)./1554-I Makes: Torent / Universal / Unicab / Havells / KEI / Gloster / Polycab /RR Kabel 2 x 10 Sqmm Mtr 100.0 100.0 10.0 False None None False None False 1000.0 0 2979050 98797 None KSHD343 Supply and transportation of following XLPE insulated, 1100V grade aRmtroured alluminium cable as per specification confiRmtring to IS:7098 (Part - I)./1554-I Makes: Torent / Universal / Unicab / Havells / KEI / Gloster / Polycab /RR Kabel 2 x 6 Sqmm Mtr 75.0 75.0 10.0 False None None False None False 750.0 0 2979051 98797 None KSHD344 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation , sand cushioning, protective covering and refilling the trench etc.as required - Upto 35 sq.mm. (Electrical SOR: Item No:7.1.1) Mtr 351.45 351.45 126.0 False None None False None False 44282.7 0 2979052 98797 None KSHD345 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation , sand cushioning, protective covering and refilling the trench etc.as required - above 35 sq.mm and upto 95 sq.mm Mtr 361.21 361.21 7.5 False None None False None False 2709.075 0 2979053 98797 None KSHD346 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation , sand cushioning, protective covering and refilling the trench etc.as required - above 95 sq.mm and upto 185 sq.mm Mtr 370.97 370.97 96.5 False None None False None False 35798.605 0 2979054 98797 None KSHD347 Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on wall surface as required - upto 35 sq.mm (clamped with 1mm thick saddle) Mtr 26.83 26.83 470.0 False None None False None False 12610.1 0 2979055 98797 None KSHD348 Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on wall surface as required - above 35 sq.mm and upto 95 sq.mm (clamped with 25 x3mm MS flat clamp) (Electrical SOR: Item No:7.7.2) Mtr 75.42 75.42 5.0 False None None False None False 377.1 0 2979056 98797 None KSHD349 Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on wall surface as required - above 95 sq.mm and upto 185 sq.mm (clamped with 25 / 40 x 3mm MS flat clamp) (Electrical SOR: Item No:7.7.3) Mtr 88.47 88.47 25.0 False None None False None False 2211.75 0 2979057 98797 None KSHD350 Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on cable tray as required - upto 35 sq.mm (clamped with 1 mm thick saddle) (Electrical SOR: Item No:7.8.1) Mtr 22.57 22.57 25.0 False None None False None False 564.25 0 2979058 98797 None KSHD351 Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on cable tray as required - above 35 sq.mm and upto 95 sq.mm (clamped with 1 mm thick saddle) (Electrical SOR: Item No:7.8.2) Mtr 52.41 52.41 25.0 False None None False None False 1310.25 0 2979059 98797 None KSHD352 Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on cable tray as required - above 95 sq.mm and upto 185 sq.mm (clamped with 25 / 40 x 3mm MS flat clamp) (Electrical SOR: Item No:7.8.3) Mtr 65.45 65.45 25.0 False None None False None False 1636.25 0 2979060 98797 None KSHD353 Supplying and making cable route marker with cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) of size 60 cm x 60 cm at the bottom and 50 cm x 50 cm at the top with a thickness of 10 cm including inscription duly engraved as required. (Electrical SOR: Item No:7.9) No 374.0 374.0 5.0 False None None False None False 1870.0 0 2979061 98797 None KSHD354 Supplying and making end teRmtrination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required - 2 X 6 sq.mm (19mm) (Electrical SOR: Item No:9.1.1) Per Set 104.75 104.75 4.0 False None None False None False 419.0 0 2979062 98797 None KSHD355 Supplying and making end teRmtrination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required - 2 X 10 sq.mm (19mm) (Electrical SOR: Item No:9.1.2) Per Set 105.84 105.84 4.0 False None None False None False 423.36 0 2979063 98797 None KSHD356 Supplying and making end teRmtrination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required - 4 X10 sq.mm (25 mm) (Electrical SOR: Item No:9.1.32) Per Set 110.63 110.63 4.0 False None None False None False 442.52 0 2979064 98797 None KSHD357 Supplying and making end teRmtrination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required - 4 X16 sq.mm (28 mm) (Electrical SOR: Item No:9.1.33) Per Set 112.52 112.52 18.0 False None None False None False 2025.36 0 2979065 98797 None KSHD358 Supplying and making end teRmtrination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required - 31/2 X25 sq.mm (28 mm) (Electrical SOR: Item No:9.1.20) Per Set 114.73 114.73 4.0 False None None False None False 458.92 0 2979066 98797 None KSHD359 Supplying and making end teRmtrination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required - 31/2 X50 sq.mm (28 mm) (Electrical SOR: Item No:9.1.21) Per Set 146.5 146.5 4.0 False None None False None False 586.0 0 2979067 98797 None KSHD360 Supplying and making end teRmtrination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required - 31/2 X120 sq.mm (45 mm) (Electrical SOR: Item No:9.1.25) Per Set 222.59 222.59 4.0 False None None False None False 890.36 0 2979068 98797 None KSHD361 GOODS LIFT Design, Detailing, Approval of Client, Supply, Erection, Testing and Commissioning of enitre system for Electric Goods Lift Makes:Kone/Otis/Schindler/ Mitsubishi/Johnson or any other make approved by Engineer-in-Charge.Type:Goods Auto Lift: Load & Capacity-5000 KG Speed : 1 m/s Stops & Openings: 3 stops & 3 openings, Single entrance car Elevator Grouping: Simplex Full Collective Control Pit Height: 2000 mm (required) Head Room height: 4800 mm (required) MAP Floor Position: Topmost floor (TOP) Car Panel Finish: Side walls: Stainless Steel, Rear wall: Stainless Steel, Front wall: Stainless Steel Ceiling & Lighting : Single ceiling tile (CT002) Stainless Steel Flooring: 6 mm ST - Checkered, steel,Car skirting material: Stainless steel Car Door Finish: Stainless steel Landing Signalization: Stainless Steel 7 segment display Flush Mounted Silver brushed Features: Existing light, Fireman Drive, Curtain of Light 169 Beams, Accurate Relevelling, Automatic, Closed Door, Three way intercom, Nudging service, Attendant Service, Lift Announcer Oil Temperature Indicator with A/T contacts Winding Temperature Indicator with A/T contacts Buchholz Relay with A/T contacts and with 1 Nos. Shut-off valves Marshalling Box Magnetic Oil Level Gauge with AlaRmtr Contact 1 No. Neutral CT of ratio 630 / 1A, 5P20, 15VA All following standard fittings will be provided in the transfoRmtrer Rating and teRmtrinal marking plate - 1No Earthing teRmtrinals - 2 Nos Lifting lugs - 2 Nos TheRmtroMtr pockets - 1No Air Release Device - 1No Bottom channels - 1Set Drain valve with plug at Bottom- 1No Filter valve with plug at top- 1No Oil conservator with drain plug- 1No Oil filling hole with cap in Conservator- 1No Plain oil level gauge- 1No Dehydrating silica gel breather- 1No Explosion vent with double diaphragm- 1No Bi-directional Flat Rollers- 4No Nos 5911017.0 5911017.0 1.0 False None None False None False 5911017.0 0 1710066793000 0 None None Buildings PLANT AND MACHINERY 27434743.73 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2979069 98798 None KSHD362 PLANT AND MACHINERY - REFRIGERATION EQUIPMENTS (FREON) - Air Cooled Condensing units with Ceiling suspended Evaporators AIR COOLED CONDENSING UNITS FOR COLD ROOM Air Cooled Scroll Condensing Unit with Energy Efficient Refrigeration Compressor with copper coils with aluminium fins, axial flow fans, HP/LP switch, liquid line filter drier and canopy.Supply of High Efficiency Evaporators, Refrigeration Accessories Comprising of TheRmtrostatic Expansion Valve, Liquid Line Sight Glass, First Charge of gas, Copper Pipes and pipe fittings for suction line and liquid line (considering 12 Rmtr distance between condensing unit and evaporator), suction line insulation, Temperature Controller, Electricals comprising of Single Phase Preventer with under and over voltage protection, MCB, Electrical contactors, Electrical Cables from CDU to Evaporator Fans (Total - 12 Units ) as Per Enclosed Specifications. Design Ambient temperature - 45 Deg C Design Inside Temperature - +4 Deg C High Efficiency Air Cooled Refrigeration Scroll Condensing Units Air cooled Condensing Units with Refrigeration Compressor for the above application with suction and discharge isolation valves, HP/LP Switch, suction line accumulator, Liquid receiver and Canopy. Cooling Capacity of Each Condensing Unit: 6.4 TR Each -4 deg.C SST / +50 deg.C SDT with R404a refrigerant. Number of Condensing Units : Twelve Nos (Two Nos for Each Chamber) Evaporators Evaporators High Efficiency Ceiling Suspended Evaporators Powder Coated Casing, Copper Coil with Aluminium Fins, High Efficiency Axial Flow Fans and Drain Pan with min 7mm Fin Spacing. Number of Evaporators : Twelve Nos (Two Nos for Each Chamber) Refrigeration Controls Refrigeration Controls for the above units comprising of Danfoss TheRmtrostatic Expansion Valves, Hand shut off Valves, etc Refrigerant Piping Refrigeration Pipes and Pipe Fittings comprising of Heavy Duty Seamless Copper Pipes,Pipe Fittings, Nitrile Rubber Insulation for Suction Lines (considering 12 Rmtr distance between CDU and Evaporators ) with first charge of R404A Refrigerant Electrical Panel for Individual Refrigeration Units Weather Proof Electrical Panels for Individual Refrigeration Units with Siemens MCBs, Contactors, OLRs for Compressors, Condenser Fans and Evaporator Fans to be positioned next to the condensing units along with Digital Temperature Indicator cum Controller with real time auto air defrost Electrical Cabling Electrical Cabling from the individual Control panels to the respective compressors, condenser fans, evaporators Supports for Cables and Piping Ladder type GI Cable Tray Supports for Electrical Cables, MS Angle and Channel Supports with painting for Refrigerant Piping Temperature display Individual temperature display with Weather Proof PVC boxes in front of Each room Power Consumption Power Consumption for Each units will be 11.7 Kw x 12 Nos Set 8031282.0 8031282.0 1.0 False None None False None False 8031282.0 0 2979070 98798 None KSHD363 Charges for Installation, Testing and Commissioning of the 8 sets of Refrigeration System for cold Room Job 710211.0 710211.0 1.0 False None None False None False 710211.0 0 2979071 98798 None KSHD364 PUFF PANEL AND ACCESSORIES - Supply of 80 mm Wall panel and ceiling Sqm 2200.0 2200.0 4166.08 False None None False None False 9165376.0 0 2979072 98798 None KSHD365 Ancillaries for wall and ceiling panels Sqm 250.0 250.0 4166.08 False None None False None False 1041520.0 0 2979073 98798 None KSHD366 Supply of 80 mm Floor Insulation Puf slab Sqm 1120.0 1120.0 2312.74 False None None False None False 2590268.8 0 2979074 98798 None KSHD367 Floor insulation - vapour barrier - primer, water based bitumen and Tarfelt Sqm 950.0 950.0 2312.74 False None None False None False 2197103.0 0 2979075 98798 None KSHD368 SLIDING DOOR - 1.5 x 2.1 Sliding Door 80mm thick Nos 115000.0 115000.0 15.0 False None None False None False 1725000.0 0 2979076 98798 None KSHD369 Safety Accessories Lot 7500.0 7500.0 15.0 False None None False None False 112500.0 0 2979077 98798 None KSHD370 Labour Charge towards installation of refrigeration equipments Lot 87414.93 87414.93 1.0 False None None False None False 87414.93 0 2979078 98798 None KSHD371 Labour Charge towards installation of 80 mm Wall panel and ceiling Sqm 250.0 250.0 4166.08 False None None False None False 1041520.0 0 2979079 98798 None KSHD372 Labour Charge towards installation of 80 mm Floor Insulation Puf slab Sqm 200.0 200.0 2312.74 False None None False None False 462548.0 0 2979080 98798 None KSHD373 Labour Charge Towards Installation of Sliding Doors Nos 18000.0 18000.0 15.0 False None None False None False 270000.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1710066794000 1 None None ELIGIBILITY Tenders from Joint ventures are Acceptable None 1710066794000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1710066794000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1710066861000 0 None None ELIGIBILITY All other General Terms and Conditions as per Tender Documents. None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None INFORMATION FORMS (6) and (6A) Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- INFORMATION FORMS (6) and (6A) None None None None The Applicant / tenderer / JV shall provide evidence that Satisfactory completed, at least one similar work of Civil works value not less than Rs. 7.5 Crores as prime contractor Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Relavent Document(enclose 4.8 of tender Document) None None None None The Applicant / tenderer / JV shall provide evidence that Satisfactory completed, at least one similar work of Cold storage works value not less than Rs. 2.50 Crores as prime contractor Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Relavent Document(enclose 4.8 of tender Document) None None None None Similar works means construction of RCC or Steel Multi-storied buildings minimum G Plus 2 with Plinth area not less than 600 sqm. Similarly for the cold stores the contractor or the partner of JV should have executed cold stores/ CA stores for not less than 2000 MT in a single work Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Relavent Document(enclose 4.8 of tender Document) None None None None The Applicant / tenderer / JV shall also provide evidence that it has achieved the minimum monthly and/or annual production rates of the key construction activities Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Relavent Document(enclose 4.8 of tender Document) None None None None APPLICATION FORM (1) Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- APPLICATION FORM (1) None None None None INFORMATION FORM (1) Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- INFORMATION FORM (1) None None None None INFORMATION FORM (1A) Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- INFORMATION FORM (1A) None None None None DETAILS OF PARTICIPATION IN THE JOINT VENTURE Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- DETAILS OF PARTICIPATION IN THE JOINT VENTURE None None None None INFORMATION FORM (2) Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- INFORMATION FORM (2) None None None None INFORMATION FORM (2A) Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- INFORMATION FORM (2A) None None None None Details of Production Levels in Key Construction Activities(Sl. No. 11 of Information Form 2A Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Details of Production Levels in Key Construction Activities(Sl. No. 11 of Information Form 2A None None None None INFORMATION FORM (3) Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- INFORMATION FORM (3) None None None None INFORMATION FORM (4) Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- INFORMATION FORM (4) None None None None INFORMATION FORM (7) Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- INFORMATION FORM (7) None None None None INFORMATION FORM (8) Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- INFORMATION FORM (8) None None None None The Applicant shall provide evidence that it has been actively engaged in the civil works construction business for at least 5 years immediately prior to the date of submission of applications, in the role of prime contractor, management contractor, partner in a joint venture, or subcontractor,and that the Applicant has generated an average annual construction turnover during the above period greater than the Rs.30.00 crores (The average annual turnover is defined as the total of certified payment certificates for works in progress or completed by the firm or firms comprising the Applicant, divided by the number of years Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Relevant Document None None None None The Applicant / tenderer / JV shall demonstrate that it has access to, or has available, liquid assets, unencumbered real assets, lines of credit, and other financial means (independent of any contractual advance payment) sufficient to meet the construction cash flow requirements for the subject contract(s) in the event of stoppage, start-up, or other delays in payment, of the minimum estimated amount Rs. 3.00 Crores , net of the Applicants commitments for other contracts Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Relevant Document None None None None INFORMATION FORM (4A) Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- INFORMATION FORM (4A) None None None None Technical Documents Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Technical Documents None None None None The audited balance sheets or other financial statements acceptable to the Employer, for the last five years (unless otherwise stated in the PITA) shall be submitted and must demonstrate the current soundness of the Applicants financial position and indicate its prospective long term profitability.If deemed necessary, the Employer shall have the authority to make inquiries with the Applicants bankers Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Relevant Document None None None None INFORMATION FORM (5) Financial Status None createdTs version createdDate modifiedDate documentName None None None None Others -- INFORMATION FORM (5)
tenderCriterionDocumentList	documentName optional documentTypeText Annual Turnover Certificate True Technical Bid Company Registration Certificate True Technical Bid Other Documents False Technical Bid
tenderWorkLocationList	tenderSubEstimateName districtName taluqName loksabhaContName assemblyContName locationDescription latitudeDegrees latitudeMinutes latitudeSeconds longitudeDegrees longitudeMinutes longitudeSeconds Buildings Kolar Maluru Kolar MALUR Chawenahally Horticulture Farm, Malur Taluk, Kolar District None None None None None None Buildings Kolar Maluru Kolar MALUR Chawenahally Horticulture Farm, Malur Taluk, Kolar District None None None None None None Buildings Kolar Maluru Kolar MALUR Chawenahally Horticulture Farm, Malur Taluk, Kolar District None None None None None None Buildings Kolar Maluru Kolar MALUR Chawenahally Horticulture Farm, Malur Taluk, Kolar District None None None None None None
tenderAddress	createdTs 1710073109000 version 0 createdDate None modifiedDate None blockNumber Joint Director of Horticulture Vegetable Section, Lalbagh, Bengaluru-560004 street None city Bengaluru state Karnataka pin 560004
tenderRecallDTO	None