| 1710055441000 | 1 | None | None | Buildings | Construction of Section office building and all other developmental works at Anagwadi. (Bilagi Sub Division) | 15093680.54 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2977931 | 98784 | None | code01 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness. By Mechanical Means using Dozerin area of light jungle (KPWD SR 2023-24,Vol-3,It. No.2.4 A) | Sqm | 11.78 | 11.78 | 2500.0 | False | None | None | False | None | False | 29450.0 | 0 | | 2977932 | 98784 | None | code02 | Earth work in surface excavation for stripping, seating of bund, Road way, by manual means for lowering & leveling the ground for all works other than foundation & depth in all kinds of soil not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work (KPWD SR 2023-24,Vol-1,It. No.1.12) | Cum | 99.75 | 99.75 | 100.0 | False | None | None | False | None | False | 9975.0 | 0 | | 2977933 | 98784 | None | code03 | Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. Depth exceeding 1.5m, but not exceeding 3 m
(KPWD SR 2023-24,Vol-1,It. No.1.4.2) | Cum | 271.95 | 271.95 | 200.0 | False | None | None | False | None | False | 54390.0 | 0 | | 2977934 | 98784 | None | code04 | Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications.
(KPWD SR 2023-24,Vol-2,It. No.4.1) | Sqm | 123.9 | 123.9 | 225.0 | False | None | None | False | None | False | 27877.5 | 0 | | 2977935 | 98784 | None | code05 | KSRB 2.8 : Providing and Filling in foundation with granite / trap broken metal 100mm. and down size, with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift. complete as per specifications.specification.No. KBS (SR 2023-24 ,I.no 1.23 P.no 11) | Cum | 2816.1 | 2816.1 | 65.0 | False | None | None | False | None | False | 183046.5 | 0 | | 2977936 | 98784 | None | code06 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (including formwork ) Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates
(KPWD SR 2023-24,Vol-1,It. No.2.1.2) | Cum | 5947.2 | 5947.2 | 50.0 | False | None | None | False | None | False | 297360.0 | 0 | | 2977937 | 98784 | None | code07 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for foundations
(KPWD SR 2023-24,Vol-1, It.No.2.5.2) | Cum | 8251.68 | 8251.68 | 110.0 | False | None | None | False | None | False | 907684.8 | 0 | | 2977938 | 98784 | None | code08 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for columns, shear wall and similar structures
(KPWD SR 2023-24Vol-1, It.No.2.5.2) | Cum | 8701.87 | 8701.87 | 17.0 | False | None | None | False | None | False | 147931.79 | 0 | | 2977939 | 98784 | None | code09 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for beams, lintels, slabs and other similar structures
(KPWD SR 2023-24,Vol-1, It.No.2.5.2) | Cum | 9746.1 | 9746.1 | 35.0 | False | None | None | False | None | False | 341113.5 | 0 | | 2977940 | 98784 | None | code10 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for chejja and projections
(KPWD SR 2023-24,Vol-1, It.No.2.5.2) | Cum | 9884.07 | 9884.07 | 3.0 | False | None | None | False | None | False | 29652.21 | 0 | | 2977941 | 98784 | None | code11 | Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately)
(KPWD SR 2021-22,Vol-2,It. No.11.32) | Kgs | 94.85 | 94.85 | 15500.0 | False | None | None | False | None | False | 1470175.0 | 0 | | 2977942 | 98784 | None | code12 | Providing and laying Autoclaved Aerated Cement blocks masonry with 100 mm thick AAC blocks as per IS 2185 (Part III) in super structure above plinth level up to floor I level in cement mortar 1:4 (1 cement : 4 coarse sand ) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.
(KPWD SR 2023-24,Vol-2, It.No-6.26) | Cum | 8984.85 | 8984.85 | 42.0 | False | None | None | False | None | False | 377363.7 | 0 | | 2977943 | 98784 | None | code13 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.
(KPWD SR 2021-22,Vol-2, It.No.8.8) | Sqm | 467.46 | 467.46 | 400.0 | False | None | None | False | None | False | 186984.0 | 0 | | 2977944 | 98784 | None | code14 | Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment.8.16.1 V-2 | Mtr | 35.7 | 35.7 | 70.0 | False | None | None | False | None | False | 2499.0 | 0 | | 2977945 | 98784 | None | code15 | Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.
(KPWD SR 2023-24,Vol-2, It.No.8.4.1) | Sqm | 454.46 | 454.46 | 165.0 | False | None | None | False | None | False | 74985.9 | 0 | | 2977946 | 98784 | None | code16 | Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove.
(KPWD SR 2023-24,Vol-2, It.No.8.79) | Mtr | 65.52 | 65.52 | 65.0 | False | None | None | False | None | False | 4258.8 | 0 | | 2977947 | 98784 | None | code17 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
(KPWD SR 2023-24,Vol-2, It.No.8.31) | Sqm | 186.9 | 186.9 | 400.0 | False | None | None | False | None | False | 74760.0 | 0 | | 2977948 | 98784 | None | code18 | Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
(KPWD SR 2023-24,Vol-2, It.No.8.29) | Sqm | 297.15 | 297.15 | 45.0 | False | None | None | False | None | False | 13371.75 | 0 | | 2977949 | 98784 | None | code19 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre as per specifications and as per directions of Engineer in charge.
(KPWD SR 2023-24,Vol-2, It.No.8.55.1 | Sqm | 58.8 | 58.8 | 400.0 | False | None | None | False | None | False | 23520.0 | 0 | | 2977950 | 98784 | None | code20 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.
(KPWD SR 2023-24,Vol-2, It.No.8.51) | Sqm | 105.0 | 105.0 | 400.0 | False | None | None | False | None | False | 42000.0 | 0 | | 2977951 | 98784 | None | code21 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge.
(KPWD SR 2021-22,Vol-2, It.No.8.54.2) | Sqm | 103.95 | 103.95 | 400.0 | False | None | None | False | None | False | 41580.0 | 0 | | 2977952 | 98784 | None | code22 | Providing and fixing M.S. grills of required pattern in frames of win- dows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc.
(KPWD SR 2021-22,Vol-2, It.No.11.34B) | Kgs | 192.15 | 192.15 | 520.0 | False | None | None | False | None | False | 99918.0 | 0 | | 2977953 | 98784 | None | code23 | Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.
(KPWD SR 2023-24,Vol-2, It.No.11.29.2) | Sqm | 905.1 | 905.1 | 25.0 | False | None | None | False | None | False | 22627.5 | 0 | | 2977954 | 98784 | None | code24 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
(KPWD SR 2021-22,Vol-2, It.No.8.33.3) | Sqm | 175.35 | 175.35 | 25.0 | False | None | None | False | None | False | 4383.75 | 0 | | 2977955 | 98784 | None | code25 | Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)
(KPWD SR 2023-24Vol-2, It.No.12.90) | Sqm | 7070.7 | 7070.7 | 25.0 | False | None | None | False | None | False | 176767.5 | 0 | | 2977956 | 98784 | None | code26 | Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x1000mm.(The cost is inclusive of all fixtures and separate charges for
minor T&P's shall not be made)
(KPWD SR 2023-24,Vol-2, It.No.12.85) | Sqm | 6004.95 | 6004.95 | 4.0 | False | None | None | False | None | False | 24019.8 | 0 | | 2977957 | 98784 | None | code27 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than
0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 800x800 mm
(KPWD SR 2023-24,Vol-2, It.No.9.12.3) | Sqm | 1319.85 | 1319.85 | 80.0 | False | None | None | False | None | False | 105588.0 | 0 | | 2977958 | 98784 | None | code28 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by
the Engineer-in-Charge.
** Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. | Sqm | 2994.6 | 2994.6 | 50.0 | False | None | None | False | None | False | 149730.0 | 0 | | 2977959 | 98784 | None | code29 | Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications.
(KPWD SR 2023-24,Vol-2, It.No.9.30) | Sqm | 5594.4 | 5594.4 | 45.0 | False | None | None | False | None | False | 251748.0 | 0 | | 2977960 | 98784 | None | code30 | Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge.
(KPWD SR 2023-24,Vol-2, It.No.10.2) | Mtr | 344.4 | 344.4 | 45.0 | False | None | None | False | None | False | 15498.0 | 0 | | 2977961 | 98784 | None | code31 | Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.
(KPWD SR 2023-24,Vol-2, It.No.11.25.2) | Kgs | 128.1 | 128.1 | 50.0 | False | None | None | False | None | False | 6405.0 | 0 | | 2977962 | 98784 | None | code32 | Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams dur- ing laying, including painting the exposed portion of loop, all as per standard design complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per direc- tions of the Engineer-in-Charge.
(KPWD SR 2023-24,Vol-2, It.No.11.17) | Nos | 192.15 | 192.15 | 10.0 | False | None | None | False | None | False | 1921.5 | 0 | | 2977963 | 98784 | None | code33 | Providing and fixing 1.8 times wide curtains for window fashion fabric of approved make with verticle wrincles, wimported thread titling mechanism for easy titling operation, with nylon imported thread, imported washable reusable fabric placed with top hanger
The rate is inclusive of fixing to the rail, fixing threads, hard ware fixtures etc., complete as per drawings, specifications. payment will be made for only opening area. Extra portion required for lapping with wall will be deemed to be covered in rate for opening area. | Sqm | 950.0 | 950.0 | 32.0 | False | None | None | False | None | False | 30400.0 | 0 | | 2977964 | 98784 | None | code34 | Providing and fixing chromium plated brass curtain rod with ISI mark having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete 25mm dia
(KPWD SR 2021-22,Vol-2, It.No.12.66.3) | m | 476.7 | 476.7 | 21.0 | False | None | None | False | None | False | 10010.7 | 0 | | 2977965 | 98784 | None | code35 | Providing and erecting overhead High end Acrylic company name board with approved text and design with all provisions for self illumination with LED illuminaries, clamps, adhesive, fasteners for fixing, inclusive of cost of materials, labour complete as per directions of engineer incharge. Cost of electrification, electrical fixtures and illumanaries for self illumanation should be included in the quoted rate. | Sqm | 6500.0 | 6500.0 | 2.25 | False | None | None | False | None | False | 14625.0 | 0 | | 2977966 | 98784 | None | code36 | Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work.
(KPWD SR 2021-22,Vol-1, It.No.1.8) | Cum | 497.7 | 497.7 | 190.0 | False | None | None | False | None | False | 94563.0 | 0 | | 2977967 | 98784 | None | code37 | Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.
(KPWD SR 2023-24,Vol-2, It.No.8.5.1) | Sqm | 384.3 | 384.3 | 36.0 | False | None | None | False | None | False | 13834.8 | 0 | | 2977968 | 98784 | None | code38 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.
(KPWD SR 2021-22,Vol-2, It.No.11.28) | Kgs | 593.25 | 593.25 | 440.0 | False | None | None | False | None | False | 261030.0 | 0 | | 2977969 | 98784 | None | code39 | Providing Teak wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications.
(KPWD SR 2023-24,Vol-2, It.No.8.46) | Cum | 247431.45 | 247431.45 | 0.14 | False | None | None | False | None | False | 34640.403 | 0 | | 2977970 | 98784 | None | code40 | Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. | Nos | 1559.25 | 1559.25 | 8.0 | False | None | None | False | None | False | 12474.0 | 0 | | 2977971 | 98784 | None | code41 | Providing and fixing in position fully panelled Teak wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures)
(KPWD SR 2023-24,Vol-2, It.No.12.14) | Sqm | 11322.15 | 11322.15 | 10.08 | False | None | None | False | None | False | 114127.272 | 0 | | 2977972 | 98784 | None | code42 | French spirit polishing :Two coats on new works including a coat of wood filler to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
(KPWD SR 2023-24,Vol-2, It.No.8.46) | Sqm | 309.75 | 309.75 | 60.48 | False | None | None | False | None | False | 18733.68 | 0 | | 2977973 | 98784 | None | code43 | Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges.
-do- with both side prelam
(KPWD SR 2023-24,Vol-1, It.No.12.55.1) | Sqm | 2484.3 | 2484.3 | 8.4 | False | None | None | False | None | False | 20868.12 | 0 | | 2977974 | 98784 | None | code44 | Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge.
(KPWD SR 2023-24,Vol-1, It.No.12.54) | Mtr | 333.9 | 333.9 | 23.2 | False | None | None | False | None | False | 7746.48 | 0 | | 2977975 | 98784 | None | code45 | Providing and laying Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand)
Dark shade pigment using ordinary cement
(KPWD SR 2023-.24,Vol-2, It.No.9.6.3) | Sqm | 1178.1 | 1178.1 | 18.9 | False | None | None | False | None | False | 22266.09 | 0 | | 2977976 | 98784 | None | code46 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete.
(KPWD SR 2023-24,Vol-2, It.No.9.11) | Sqm | 933.45 | 933.45 | 10.8 | False | None | None | False | None | False | 10081.26 | 0 | | 2977977 | 98784 | None | code47 | Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
Area of slab over 0.50 m2
(KPWD SR 2023-24,Vol-2, It.No.10.1.2) | Sqm | 4133.85 | 4133.85 | 37.0 | False | None | None | False | None | False | 152952.45 | 0 | | 2977978 | 98784 | None | code48 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2, including pointing in white cement mixed with pigment of matching shade complete. size of tiles shall be as recomended by engineering incharge
(KPWD SR 2023-24,Vol-2, It.No.10.14)) | Sqm | 1161.3 | 1161.3 | 28.0 | False | None | None | False | None | False | 32516.4 | 0 | | 2977979 | 98784 | None | code49 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in Granite, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
(KPWD SR 2023-24,Vol-2, It.No.10.4) | Nos | 620.55 | 620.55 | 2.0 | False | None | None | False | None | False | 1241.1 | 0 | | 2977980 | 98784 | None | code50 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.
(KPWD SR 2023-24,Vol-2, It.No.11.6.1) | Sqm | 2764.65 | 2764.65 | 5.76 | False | None | None | False | None | False | 15924.384 | 0 | | 2977981 | 98784 | None | code51 | Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 m dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in- charge. 10 x 80 mm including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer- in-Charge.
(KPWD SR 2023-24,Vol-2, It.No.11.27.2) | Nos | 101.85 | 101.85 | 20.0 | False | None | None | False | None | False | 2037.0 | 0 | | 2977982 | 98784 | None | code52 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.
(KPWD SR 2023-24,Vol-2, It.No.12.58) | Nos. | 126.0 | 126.0 | 6.0 | False | None | None | False | None | False | 756.0 | 0 | | 2977983 | 98784 | None | code53 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
(KPWD SR 2023-24,Vol-2, It.No.12.59) | Nos. | 1169.7 | 1169.7 | 4.0 | False | None | None | False | None | False | 4678.8 | 0 | | 2977984 | 98784 | None | code54 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
(KPWD SR 2023-24,Vol-2, It.No.12.60) | Nos. | 1104.6 | 1104.6 | 10.0 | False | None | None | False | None | False | 11046.0 | 0 | | 2977985 | 98784 | None | code55 | Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete.
(KPWD SR 2023-24,Vol-2, It.No.12.61) | Nos. | 1039.5 | 1039.5 | 10.0 | False | None | None | False | None | False | 10395.0 | 0 | | 2977986 | 98784 | None | code56 | Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete
(KPWD SR 2023-24,Vol-2, It.No.12.62) | Nos. | 248.85 | 248.85 | 20.0 | False | None | None | False | None | False | 4977.0 | 0 | | 2977987 | 98784 | None | code57 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.
(KPWD SR 2023-24,Vol-2, It.No.12.65) | Nos. | 61.95 | 61.95 | 10.0 | False | None | None | False | None | False | 619.5 | 0 | | 2977988 | 98784 | None | code58 | Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type)
(KPWD SR 2023-24,Vol-2, It.No.12.75.1) | Nos. | 288.75 | 288.75 | 18.0 | False | None | None | False | None | False | 5197.5 | 0 | | 2977989 | 98784 | None | code59 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :250x10mm
(KPWD SR 2023-24,Vol-2, It.No.12.76.1) | Each | 456.75 | 456.75 | 10.0 | False | None | None | False | None | False | 4567.5 | 0 | | 2977990 | 98784 | None | code60 | Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. 65mm
(KPWD SR 2023-24,Vol-2, It.No.12.77.3) | Each | 378.0 | 378.0 | 2.0 | False | None | None | False | None | False | 756.0 | 0 | | 2977991 | 98784 | None | code61 | Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. 75mm
(KPWD SR 2023-24,Vol-2, It.No.12.77.4) | Each | 403.2 | 403.2 | 2.0 | False | None | None | False | None | False | 806.4 | 0 | | 2977992 | 98784 | None | code62 | Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws. | Each | 75.6 | 75.6 | 2.0 | False | None | None | False | None | False | 151.2 | 0 | | 2977993 | 98784 | None | code63 | Providing and fixing bright finished brass handles with screws etc.complete: Brass handles 125 mm with plate 175x32 mm
(KPWD SR 2023-24,Vol-2, It.No.12.79.1) | Each | 261.45 | 261.45 | 2.0 | False | None | None | False | None | False | 522.9 | 0 | | 2977994 | 98784 | None | code64 | Providing and fixing bright finished brass handles with screws etc.complete:Brass handles 100 mm with plate 150x32 mm
(KPWD SR 2023-24,Vol-2, It.No.12.79.2) | Each | 242.55 | 242.55 | 6.0 | False | None | None | False | None | False | 1455.3 | 0 | | 2977995 | 98784 | None | code65 | Providing and fixing magnetic latcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. Triple strip vertical type
(KPWD SR 2023-24,Vol-2, It.No.12.80.1) | Each | 45.15 | 45.15 | 6.0 | False | None | None | False | None | False | 270.9 | 0 | | 2977996 | 98784 | None | code66 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. Double strip (horizontal type)
(KPWD SR 2023-24,Vol-2, It.No.12.80.2) | Each | 82.95 | 82.95 | 6.0 | False | None | None | False | None | False | 497.7 | 0 | | 2977997 | 98784 | None | code67 | Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc complete as per directions of Engineer- in-charge
(KPWD SR 2023-24,Vol-2, It.No.12.81) | Nos. | 434.7 | 434.7 | 2.0 | False | None | None | False | None | False | 869.4 | 0 | | 2977998 | 98784 | None | code68 | Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by with stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately)
(KPWD SR 2023-24,Vol-2, It.No.12.82) | Nos. | 23.1 | 23.1 | 2.0 | False | None | None | False | None | False | 46.2 | 0 | | 2977999 | 98784 | None | code69 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately)
M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
for columns, shear wall and similar structures
(KPWD SR 2023-24,Vol-1, It.No.2.5.2) | Cum | 7185.15 | 7185.15 | 8.0 | False | None | None | False | None | False | 57481.2 | 0 | | 2978000 | 98784 | None | code70 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for columns, shear wall and similar structures(KPWD SR 2023-24,Vol-1, It.No.2.5.2) | Cum | 8771.49 | 8771.49 | 8.0 | False | None | None | False | None | False | 70171.92 | 0 | | 2978001 | 98784 | None | code71 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)
M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
for beams, lintels, slabs and other similar structures
(KPWD SR 2023-24,Vol-1, It.No.2.5.2) | Cum | 10131.06 | 10131.06 | 35.0 | False | None | None | False | None | False | 354587.1 | 0 | | 2978002 | 98784 | None | code72 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)
M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
for chejja and projections
(KPWD SR 2023-24,Vol-1, It.No.2.5.2) | Cum | 10131.06 | 10131.06 | 2.0 | False | None | None | False | None | False | 20262.12 | 0 | | 2978003 | 98784 | None | code73 | Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately)
(KPWD SR 2023-24,Vol-2,It. No.11.32) | Kgs | 100.8 | 100.8 | 12685.0 | False | None | None | False | None | False | 1278648.0 | 0 | | 2978004 | 98784 | None | code74 | Providing and laying Autoclaved Aerated Cement blocks masonry with 100 mm thick AAC blocks as per IS 2185 (Part III) in super structure above plinth level up to floor I level in cement mortar 1:4 (1 cement : 4 coarse sand ) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.
(KPWD SR 2023-24,Vol-2, It.No-6.26) | Cum | 8984.85 | 8984.85 | 45.0 | False | None | None | False | None | False | 404318.25 | 0 | | 2978005 | 98784 | None | code75 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.
(KPWD SR 2023-24,Vol-2, It.No.8.8) | Sqm | 467.46 | 467.46 | 400.0 | False | None | None | False | None | False | 186984.0 | 0 | | 2978006 | 98784 | None | code76 | Providing 12 mm thick plain cement mortar bands in cement mortar 1:4 (1 cement : 4 fine sand):Flush Band including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(KPWD SR 2023-24,Vol-2, It.No.8.16.1) | Mtr | 35.7 | 35.7 | 65.0 | False | None | None | False | None | False | 2320.5 | 0 | | 2978007 | 98784 | None | code77 | Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.
(KPWD SR 2023-24,Vol-2, It.No.8.4.1) | Sqm | 454.46 | 454.46 | 300.0 | False | None | None | False | None | False | 136338.0 | 0 | | 2978008 | 98784 | None | code78 | Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove.
(KPWD SR 2023-24,Vol-2, It.No.8.79) | Mtr | 65.52 | 65.52 | 65.0 | False | None | None | False | None | False | 4258.8 | 0 | | 2978009 | 98784 | None | code79 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
(KPWD SR 2023-24,Vol-2, It.No.8.31) | Sqm | 186.9 | 186.9 | 300.0 | False | None | None | False | None | False | 56070.0 | 0 | | 2978010 | 98784 | None | code80 | Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
(KPWD SR 2023-24,Vol-2, It.No.8.29) | Sqm | 297.15 | 297.15 | 45.0 | False | None | None | False | None | False | 13371.75 | 0 | | 2978011 | 98784 | None | code81 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre as per specifications and as per directions of Engineer in charge.
(KPWD SR 2023-24,Vol-2, It.No.8.55.2) | Sqm | 58.8 | 58.8 | 300.0 | False | None | None | False | None | False | 17640.0 | 0 | | 2978012 | 98784 | None | code82 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.
(KPWD SR 2023-24,Vol-2, It.No.8.51) | Sqm | 105.0 | 105.0 | 400.0 | False | None | None | False | None | False | 42000.0 | 0 | | 2978013 | 98784 | None | code83 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge.
(KPWD SR 2023-24,Vol-2, It.No.8.54.2) | Sqm | 103.95 | 103.95 | 400.0 | False | None | None | False | None | False | 41580.0 | 0 | | 2978014 | 98784 | None | code84 | Providing and fixing M.S. grills of required pattern in frames of win- dows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc.
(KPWD SR 2023-24,Vol-2, It.No.11.34B) | Kgs | 192.15 | 192.15 | 520.0 | False | None | None | False | None | False | 99918.0 | 0 | | 2978015 | 98784 | None | code85 | Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.
(KPWD SR 2021-22,Vol-2, It.No.11.29.2) | Sqm | 905.1 | 905.1 | 25.0 | False | None | None | False | None | False | 22627.5 | 0 | | 2978016 | 98784 | None | code86 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
(KPWD SR 2021-22,Vol-2, It.No.8.33.3) | Sqm | 175.35 | 175.35 | 25.0 | False | None | None | False | None | False | 4383.75 | 0 | | 2978017 | 98784 | None | code87 | Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)
(KPWD SR 2023-24,Vol-2, It.No.12.90) | Sqm | 7070.7 | 7070.7 | 25.0 | False | None | None | False | None | False | 176767.5 | 0 | | 2978018 | 98784 | None | code88 | Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x
1000mm.(The cost is inclusive of all fixtures and separate charges for
minor T&P's shall not be made)
(KPWD SR 2021-22,Vol-2, It.No.12.85) | Sqm | 6004.95 | 6004.95 | 4.05 | False | None | None | False | None | False | 24320.0475 | 0 | | 2978019 | 98784 | None | code89 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 800x800 mm
(KPWD SR 2023-24,Vol-2, It.No.9.12.3) | Sqm | 1319.85 | 1319.85 | 75.0 | False | None | None | False | None | False | 98988.75 | 0 | | 2978020 | 98784 | None | code90 | Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications.
(KPWD SR 2023-24,Vol-2, It.No.9.30) | Sqm | 5594.4 | 5594.4 | 46.0 | False | None | None | False | None | False | 257342.4 | 0 | | 2978021 | 98784 | None | code91 | Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge.
(KPWD SR 2023-24,Vol-2, It.No.10.2) | Mtr | 344.4 | 344.4 | 45.0 | False | None | None | False | None | False | 15498.0 | 0 | | 2978022 | 98784 | None | code92 | Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.
(KPWD SR 2023-24,Vol-2, It.No.11.25.2) | Kgs | 128.1 | 128.1 | 60.0 | False | None | None | False | None | False | 7686.0 | 0 | | 2978023 | 98784 | None | code93 | Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams dur- ing laying, including painting the exposed portion of loop, all as per standard design complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per direc- tions of the Engineer-in-Charge.
(KPWD SR 2023-24,Vol-2, It.No.11.17) | Nos | 192.15 | 192.15 | 10.0 | False | None | None | False | None | False | 1921.5 | 0 | | 2978024 | 98784 | None | code94 | Providing and fixing 1.8 times wide curtains for window fashion fabric of approved make with verticle wrincles, wimported thread titling mechanism for easy titling operation, with nylon imported thread, imported washable reusable fabric placed with top hanger
The rate is inclusive of fixing to the rail, fixing threads, hard ware fixtures etc., complete as per drawings, specifications. payment will be made for only opening area. Extra portion required for lapping with wall will be deemed to be covered in rate for opening area. | Sqm | 708.2 | 708.2 | 31.5 | False | None | None | False | None | False | 22308.3 | 0 | | 2978025 | 98784 | None | code95 | Providing and fixing chromium plated brass curtain rod with ISI mark having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete 25mm dia
(KPWD SR 2023-24,Vol-2, It.No.12.66.3) | m | 476.7 | 476.7 | 21.0 | False | None | None | False | None | False | 10010.7 | 0 | | 2978026 | 98784 | None | code96 | Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.
(KPWD SR 2023-24,Vol-2, It.No.8.5.1) | Sqm | 384.3 | 384.3 | 35.14 | False | None | None | False | None | False | 13504.302 | 0 | | 2978027 | 98784 | None | code97 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.
(KPWD SR 2023-24,Vol-2, It.No.11.28) | Kgs | 593.25 | 593.25 | 277.5 | False | None | None | False | None | False | 164626.875 | 0 | | 2978028 | 98784 | None | code98 | Providing Teak wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications.
(KPWD SR 2023-24,Vol-2, It.No.8.46) | Cum | 247431.45 | 247431.45 | 0.13 | False | None | None | False | None | False | 32166.0885 | 0 | | 2978029 | 98784 | None | code99 | Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. | Nos | 1559.25 | 1559.25 | 8.0 | False | None | None | False | None | False | 12474.0 | 0 | | 2978030 | 98784 | None | code100 | Providing and fixing in position fully panelled Teak wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures)
(KPWD SR 2023-24,Vol-2, It.No.12.14) | Sqm | 11322.15 | 11322.15 | 5.04 | False | None | None | False | None | False | 57063.636 | 0 | | 2978031 | 98784 | None | code101 | French spirit polishing :Two coats on new works including a coat of wood filler to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
(KPWD SR 2023-24,Vol-2, It.No.8.46) | Sqm | 309.75 | 309.75 | 20.16 | False | None | None | False | None | False | 6244.56 | 0 | | 2978032 | 98784 | None | code102 | Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges.
-do- with both side prelam
(KPWD SR 2023-24,Vol-1, It.No.12.55.1) | Sqm | 2484.3 | 2484.3 | 4.2 | False | None | None | False | None | False | 10434.06 | 0 | | 2978033 | 98784 | None | code103 | Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge.
(KPWD SR 2021-22,Vol-1, It.No.12.54) | Mtr | 333.9 | 333.9 | 10.4 | False | None | None | False | None | False | 3472.56 | 0 | | 2978034 | 98784 | None | code104 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete.
(KPWD SR 2023-24,Vol-2, It.No.9.11) | Sqm | 933.45 | 933.45 | 10.8 | False | None | None | False | None | False | 10081.26 | 0 | | 2978035 | 98784 | None | code105 | Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Area of slab over 0.50 m2
(KPWD SR 2023-24,Vol-2, It.No.10.1.2) | Sqm | 4133.85 | 4133.85 | 36.9 | False | None | None | False | None | False | 152539.065 | 0 | | 2978036 | 98784 | None | code106 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2, including pointing in white cement mixed with pigment of matching shade complete. size of tiles shall be as recomended by engineering incharge
(KPWD SR 2023-24,Vol-2, It.No.10.14)) | Sqm | 1161.3 | 1161.3 | 27.72 | False | None | None | False | None | False | 32191.236 | 0 | | 2978037 | 98784 | None | code107 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in Granite, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
(KPWD SR 2023-24,Vol-2, It.No.10.4) | Nos | 620.55 | 620.55 | 2.0 | False | None | None | False | None | False | 1241.1 | 0 | | 2978038 | 98784 | None | code108 | Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 m dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in- charge. 10 x 80 mm including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer- in-Charge.
(KPWD SR 2023-24,Vol-2, It.No.11.27.2) | Nos | 101.85 | 101.85 | 20.0 | False | None | None | False | None | False | 2037.0 | 0 | | 2978039 | 98784 | None | code109 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.
(KPWD SR 2023-24,Vol-2, It.No.12.58) | Nos. | 126.0 | 126.0 | 7.0 | False | None | None | False | None | False | 882.0 | 0 | | 2978040 | 98784 | None | code110 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
(KPWD SR 2023-24,Vol-2, It.No.12.59) | Nos. | 1169.7 | 1169.7 | 7.0 | False | None | None | False | None | False | 8187.9 | 0 | | 2978041 | 98784 | None | code111 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
(KPWD SR 2023-24,Vol-2, It.No.12.60) | Nos. | 1104.6 | 1104.6 | 2.0 | False | None | None | False | None | False | 2209.2 | 0 | | 2978042 | 98784 | None | code112 | Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete.
(KPWD SR 2021-22,Vol-2, It.No.12.61) | Nos. | 1039.5 | 1039.5 | 7.0 | False | None | None | False | None | False | 7276.5 | 0 | | 2978043 | 98784 | None | code113 | Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete
(KPWD SR 2023-24,Vol-2, It.No.12.62) | Nos. | 248.85 | 248.85 | 14.0 | False | None | None | False | None | False | 3483.9 | 0 | | 2978044 | 98784 | None | code114 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.
(KPWD SR 2023-24,Vol-2, It.No.12.65) | Nos. | 61.95 | 61.95 | 7.0 | False | None | None | False | None | False | 433.65 | 0 | | 2978045 | 98784 | None | code115 | Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type)
(KPWD SR 2023-24,Vol-2, It.No.12.75.1) | Nos. | 288.75 | 288.75 | 21.0 | False | None | None | False | None | False | 6063.75 | 0 | | 2978046 | 98784 | None | code116 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :250x10mm
(KPWD SR 2023-24,Vol-2, It.No.12.76.1) | Each | 456.75 | 456.75 | 7.0 | False | None | None | False | None | False | 3197.25 | 0 | | 2978047 | 98784 | None | code117 | Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. 65mm
(KPWD SR 2023-24,Vol-2, It.No.12.77.3) | Each | 456.75 | 456.75 | 4.0 | False | None | None | False | None | False | 1827.0 | 0 | | 2978048 | 98784 | None | code118 | Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. 75mm
(KPWD SR 2023-24,Vol-2, It.No.12.77.4) | Each | 403.2 | 403.2 | 4.0 | False | None | None | False | None | False | 1612.8 | 0 | | 2978049 | 98784 | None | code119 | Providing and fixing 50 mm bright finished brass cup board or wardrobe
knob of approved quality with necessary screws. | Each | 75.6 | 75.6 | 4.0 | False | None | None | False | None | False | 302.4 | 0 | | 2978050 | 98784 | None | code120 | Providing and fixing bright finished brass handles with screws etc.complete:
Brass handles 125 mm with plate 175x32 mm
(KPWD SR 2023-24,Vol-2, It.No.12.79.1) | Each | 261.45 | 261.45 | 4.0 | False | None | None | False | None | False | 1045.8 | 0 | | 2978051 | 98784 | None | code121 | Providing and fixing bright finished brass handles with screws etc.complete:
Brass handles 100 mm with plate 150x32 mm
(KPWD SR 2023-24,Vol-2, It.No.12.79.2) | Each | 242.55 | 242.55 | 4.0 | False | None | None | False | None | False | 970.2 | 0 | | 2978052 | 98784 | None | code122 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. Triple strip vertical type
(KPWD SR 2023-24,Vol-2, It.No.12.80.1) | Each | 45.15 | 45.15 | 4.0 | False | None | None | False | None | False | 180.6 | 0 | | 2978053 | 98784 | None | code123 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. Double strip (horizontal type)
(KPWD SR 2023-24,Vol-2, It.No.12.80.2) | Each | 82.95 | 82.95 | 4.0 | False | None | None | False | None | False | 331.8 | 0 | | 2978054 | 98784 | None | code124 | Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc complete as per directions of Engineer- in-charge
(KPWD SR 2023-24,Vol-2, It.No.12.81) | Nos. | 437.7 | 437.7 | 4.0 | False | None | None | False | None | False | 1750.8 | 0 | | 2978055 | 98784 | None | code125 | Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by with stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately)
(KPWD SR 2023-24,Vol-2, It.No.12.82) | Nos. | 23.1 | 23.1 | 8.0 | False | None | None | False | None | False | 184.8 | 0 | | 2978056 | 98784 | None | code126 | Providing and laying in position Reinforced cement concrete for all
Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately)
M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
for columns, shear wall and similar structures
(KPWD SR 2023-24,Vol-1, It.No.2.5.2) | Cum | 7185.15 | 7185.15 | 8.1 | False | None | None | False | None | False | 58199.715 | 0 | | 2978057 | 98784 | None | code127 | Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge.
(KPWD SR 2023-24,Vol-2, It.No.15.1) | Sqm | 866.42 | 866.42 | 81.0 | False | None | None | False | None | False | 70180.02 | 0 | | 2978058 | 98784 | None | code128 | Providing and supplying 'Acoustical Wall Paneling' with square edges made of fibre glass substrate 25mm thick and wrapped on the front side with an acoustically transparent and classified for Fire reaction Class A, as per ASTM E-84, fabric with option of colors - as per the choice of the Architect/Engineer incharge of the size 600x600mm,
600x1200mm & 600x1800mm providing a minimum sound absorption level of 0.85 NRC to be affixed to wall using Wall panel lmpaler sand construction adhesives as per the instructions laid down by the certified manufacturer.
(KPWD SR 2023-24,Vol-2, It.No.7.51) | Sqm | 6013.35 | 6013.35 | 72.0 | False | None | None | False | None | False | 432961.2 | 0 | | 2978059 | 98784 | None | code129 | Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.
(KPWD SR 2023-24,Vol-2, It.No.11.16.2) | Kgs | 154.35 | 154.35 | 1500.0 | False | None | None | False | None | False | 231525.0 | 0 | | 2978060 | 98784 | None | code130 | Providing and fixing Free Standing Table for Cabin - without frames consisting of 25mm thick table top finished with 1.0mm sunmica as per selection, edges finished with Teak wood beading, 18mm thick edge bonded Modesty, Wire manager - ABS plastic grommet one number per table Hardware-Minifix assembly and screw leg., as per specifications, drawings and as directed by Engineer in charge - Reception Desk :- Main Table - 1500 mmW x 1200mm D x 750mm ht. Including 12mm thick tempered glass of selected make Featherlite / Godrej or equivalent make as per the directions of the Engineer incharge
Side runner 900mmW X 380mm D X 600mm ht | Nos | 27000.0 | 27000.0 | 2.0 | False | None | None | False | None | False | 54000.0 | 0 | | 2978061 | 98784 | None | code131 | Providing and fixing Free Standing Table for Cabin - without frames consisting of 25mm thick table top finished with 1.0mm sunmica as per selection, edges finished with Teak wood beading, 18mm thick edge bonded Modesty, Wire manager - ABS plastic grommet one number per table Hardware-Minifix assembly and screw leg., as per specifications, drawings and as directed by Engineer in charge - Reception Desk :- Main Table - 1050 mmW x 750 mm D x 750mm ht. Including 12mm thick tempered glass of selected make as per the directions of the Engineer incharge | Nos | 10000.0 | 10000.0 | 4.0 | False | None | None | False | None | False | 40000.0 | 0 | | 2978062 | 98784 | None | code132 | Providing matrial made of polypropylene with dimension 54cmx49cmx(109-114)cm size, with SGS certified black gaslift,PU covered ergonomic linkage handrail adjustable, revolving, having base of 5 wheels for movement including labour charges, transportation as approved and specified by engineer in charge
Godrej/featherlite/equivalent
High back chair | Nos | 10000.0 | 10000.0 | 2.0 | False | None | None | False | None | False | 20000.0 | 0 | | 2978063 | 98784 | None | code133 | Providing matrial made of polypropylene dimension 26x26x41 inches, brand Featherlite ,it has AC 70 mesh, fabric upholstered cushion seat, single lock synchro mechanism, one way adjustable arms and nylon base including labour charges, transportation as approved and specified by engineer in charge
Godrej/featherlite/equivalent
Medium back chair | Nos | 7000.0 | 7000.0 | 4.0 | False | None | None | False | None | False | 28000.0 | 0 | | 2978064 | 98784 | None | code134 | Providing visitors chair with legs stainless steel, brand Featherlite ,it has AC 70 mesh, fabric upholstered cushion seat ,style modern and contemporary with dimensions 55x80x44 cm, adjustable arms and nylon base with weight bearing capacity 110 kg including labour charges, transportation as approved and specified by engineer in charge
Godrej/featherlite/equivalent | Nos | 6500.0 | 6500.0 | 10.0 | False | None | None | False | None | False | 65000.0 | 0 | | 2978065 | 98784 | None | code135 | Providing 3 seater visitors sofa of SS make with stainless steel of 304 grade factory finish with armrest on either side with weight bearing capacity not less than 400 kg including labour charges, transportation as approved and specified by engineer in charge
Godrej/featherlite/equivalent | Nos | 21000.0 | 21000.0 | 2.0 | False | None | None | False | None | False | 42000.0 | 0 | | 2978066 | 98784 | None | code136 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm dia 13.32.2 V-2 | Mtr | 397.95 | 397.95 | 100.0 | False | None | None | False | None | False | 39795.0 | 0 | | 2978067 | 98784 | None | code137 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm dia 13.32.3 V-2 | Mtr | 469.35 | 469.35 | 100.0 | False | None | None | False | None | False | 46935.0 | 0 | | 2978068 | 98784 | None | code138 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 32 mm dia 13.32.4 V-2 | Mtr | 584.85 | 584.85 | 125.0 | False | None | None | False | None | False | 73106.25 | 0 | | 2978069 | 98784 | None | code139 | Supplying, installing and testing approved make approved make full way lever operated forged brass ball valve of brass body with forged brass hard chrome plated steel ball tested to a pressure not less than 15 Kg / sqcm with threaded joints. 40/25 mm dia (Screwed ends) | Nos | 650.0 | 650.0 | 2.0 | False | None | None | False | None | False | 1300.0 | 0 | | 2978070 | 98784 | None | code140 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work do- 100 mm dia 13.33.9 V-2 | Mtr | 2650.2 | 2650.2 | 20.0 | False | None | None | False | None | False | 53004.0 | 0 | | 2978071 | 98784 | None | code141 | Providing and fixing white vitreous china pedestal type water closet
(European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :14.3.1 V-2 | Nos | 6275.85 | 6275.85 | 4.0 | False | None | None | False | None | False | 25103.4 | 0 | | 2978072 | 98784 | None | code142 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:580X440 14.1.1 V-2 | Nos | 5128.2 | 5128.2 | 2.0 | False | None | None | False | None | False | 10256.4 | 0 | | 2978073 | 98784 | None | code143 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :14.4.1 V-2 | Nos | 4676.7 | 4676.7 | 2.0 | False | None | None | False | None | False | 9353.4 | 0 | | 2978074 | 98784 | None | code144 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:630X450mm 14.7.1 V-2 | Nos | 3236.1 | 3236.1 | 2.0 | False | None | None | False | None | False | 6472.2 | 0 | | 2978075 | 98784 | None | code145 | Providing pedestal for wash basin of approved 1st quality and make conforming to ISI Specifications and fixing for low down cistern as directed .Rate includes cost of materials and conveyance to work spot. | Nos | 972.0 | 972.0 | 2.0 | False | None | None | False | None | False | 1944.0 | 0 | | 2978076 | 98784 | None | code146 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backingRectangular shape 453X357mm 14.32.2 V-2 | Nos | 1068.9 | 1068.9 | 2.0 | False | None | None | False | None | False | 2137.8 | 0 | | 2978077 | 98784 | None | code147 | Providing and fixing SS jaguar make 304 grade tap | Nos | 750.0 | 750.0 | 6.0 | False | None | None | False | None | False | 4500.0 | 0 | | 2978078 | 98784 | None | code148 | Providing and fixing SS jaguar make 304 grade 2 way valve | Nos | 750.0 | 750.0 | 6.0 | False | None | None | False | None | False | 4500.0 | 0 | | 2978079 | 98784 | None | code149 | KSRB 11-17-1 : Providing and fixing C.P. brass towel rail 740mm length, 20mm dia with C.P brackets, fixed to wooden cleats with C.P. brass screws including cost of materials, labour complete as per specifications. | Nos | 798.12 | 798.12 | 2.0 | False | None | None | False | None | False | 1596.24 | 0 | | 2978080 | 98784 | None | code150 | KSRB 11-16 : Providing and fixing 600x120mm glass shelf supported on alluminium angle frame with C.P brass brackets, guard rail fixed to wooden cleats with C.P. brass screws and washers including cost of materials, labour complete as per specifications. | Nos | 1168.56 | 1168.56 | 2.0 | False | None | None | False | None | False | 2337.12 | 0 | | 2978081 | 98784 | None | code151 | Providing and fixing SS jaguar make 304 grade tissue holder | Nos | 750.0 | 750.0 | 2.0 | False | None | None | False | None | False | 1500.0 | 0 | | 2978082 | 98784 | None | code152 | Providing and fixing SS jaguar make 304 grade soap holder/dispender | Nos | 750.0 | 750.0 | 2.0 | False | None | None | False | None | False | 1500.0 | 0 | | 2978083 | 98784 | None | code153 | Providing 20 lrts capacity heavy make water bucket along with mug of 1.5 ltr capacity | Nos | 250.0 | 250.0 | 2.0 | False | None | None | False | None | False | 500.0 | 0 | | 2978084 | 98784 | None | code154 | Providing 40 lrts and above capacity plastic dusbins heavy make with stand nilkamal/astro /equivalent | Nos | 2000.0 | 2000.0 | 2.0 | False | None | None | False | None | False | 4000.0 | 0 | | 2978085 | 98784 | None | code155 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work do- 150 mm dia 13.33.10 V-2 | Mtr | 5571.3 | 5571.3 | 20.0 | False | None | None | False | None | False | 111426.0 | 0 | | 2978086 | 98784 | None | code156 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With common burnt clay (non modular) bricks of class designation 3.5. 13.52 V-2 | Nos | 11094.3 | 11094.3 | 4.0 | False | None | None | False | None | False | 44377.2 | 0 | | 2978087 | 98784 | None | code157 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 600X850 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. 13.55 V-2 | Nos | 7771.05 | 7771.05 | 4.0 | False | None | None | False | None | False | 31084.2 | 0 | | 2978088 | 98784 | None | code158 | Making soak pit 2.5 m diameter 3.0 m deep with 45 x 45 cm dry brick honey comb shaft with bricks and PVC S.W.R drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With common burnt clay (non modular) bricks of class designation 3.5. 13.56 V-2 | Nos | 24175.2 | 24175.2 | 1.0 | False | None | None | False | None | False | 24175.2 | 0 | | 2978089 | 98784 | None | code159 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.. I.No. 13.34 pg.123 SR 2023-24 BR 9.00+AW@5%=0.45 Total=9.45 | l | 9.45 | 9.45 | 2000.0 | False | None | None | False | None | False | 18900.0 | 0 | | 2978090 | 98784 | None | code160 | Concealed Conduit System Supplying Heavy Gauge PVC Conduit pipe 19/20 mm dia 2mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipes ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary. | Per Mtr | 66.0 | 66.0 | 100.0 | False | None | None | False | None | False | 6600.0 | 0 | | 2978091 | 98784 | None | code161 | Concealed Conduit System Supplying Heavy Gauge PVC Conduit pipe 25 mm dia 2mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipes ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary. | Per Mtr | 78.0 | 78.0 | 150.0 | False | None | None | False | None | False | 11700.0 | 0 | | 2978092 | 98784 | None | code162 | Concealed conduit System, Supplying Heavy Gauge PVC Conduit Pipe 19/20mm dia 2mm thick with suitable size bends, metal/PVE junction boxes adhesive paste etc., by groove cutting in the wall & fixing by using U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run through out the conduit wherever necessary. | Per Mtr | 68.0 | 68.0 | 150.0 | False | None | None | False | None | False | 10200.0 | 0 | | 2978093 | 98784 | None | code163 | Point Wiring using Copper wire with switch.
Supplying and wiring adopting loop system in existing PVC conduit / casing capping using 1100V grade, COPPER conductor flexible multi strand FRLS PVC insulated to 2X1.5 Sqmm cabale confirming to the GTP with a 6 Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. using class A materials Short point upto 3 Mtr from tapping point to outlet via switch. | Nos | 285.0 | 285.0 | 40.0 | False | None | None | False | None | False | 11400.0 | 0 | | 2978094 | 98784 | None | code164 | Point Wiring using Copper wire with switch.
Supplying and wiring adopting loop system in existing PVC conduit / casing capping using 1100V grade, COPPER conductor flexible multi strand FRLS PVC insulated to 2X1.5 Sqmm cabale confirming to the GTP with a 6 Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. using class A materials Medium point above 3 Mtr upto 6 Mtr from tapping point to outlet via switch. | Nos | 394.0 | 394.0 | 25.0 | False | None | None | False | None | False | 9850.0 | 0 | | 2978095 | 98784 | None | code165 | Point Wiring using Copper wire with switch.
Supplying and wiring adopting loop system in existing PVC conduit / casing capping using 1100V grade, COPPER conductor flexible multi strand FRLS PVC insulated to 2X1.5 Sqmm cabale confirming to the GTP with a 6 Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. using class A materials long point above 6 Mtr up to 10 Mtr from tapping point to outlet via switch. | Nos | 570.0 | 570.0 | 20.0 | False | None | None | False | None | False | 11400.0 | 0 | | 2978096 | 98784 | None | code166 | Supplying 6A flush type socket and 6Amps flush type SP switch either surface / flush mounting in existing gang box or in a 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required. as per IS 1293 and IS 3654
A) 6 Amps 3/5 way | Each | 147.0 | 147.0 | 15.0 | False | None | None | False | None | False | 2205.0 | 0 | | 2978097 | 98784 | None | code167 | Supplying and mounting 2 Nos of 2 way 6 amps flush type switches either surface/flush mounted on existing gang box or in 4mm thick plastic sheet and mounted on a flush mounted wooden box and wiring as required. IS 1293 | Each | 170.0 | 170.0 | 15.0 | False | None | None | False | None | False | 2550.0 | 0 | | 2978098 | 98784 | None | code168 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to the attached GTP of Group A material. 1.0 Sqmm | Mtr | 19.0 | 19.0 | 250.0 | False | None | None | False | None | False | 4750.0 | 0 | | 2978099 | 98784 | None | code169 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to the attached GTP of Group A material. 2.5 Sqmm | Mtr | 42.0 | 42.0 | 350.0 | False | None | None | False | None | False | 14700.0 | 0 | | 2978100 | 98784 | None | code170 | Supplying type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles,Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. 48" Sweep (1200mm), Regular model(khaitan, Crompton Greaves, Orient, Polar, Bajaj, Havells) | Each | 2984.0 | 2984.0 | 6.0 | False | None | None | False | None | False | 17904.0 | 0 | | 2978101 | 98784 | None | code171 | Fixing a ceiling/Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing a 5 amperes ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted wire of approved quality mounted on a suitable size wooden board and wired. | Each | 978.0 | 978.0 | 6.0 | False | None | None | False | None | False | 5868.0 | 0 | | 2978102 | 98784 | None | code172 | 6 amps Lamp Holders | Each | 71.0 | 71.0 | 25.0 | False | None | None | False | None | False | 1775.0 | 0 | | 2978103 | 98784 | None | code173 | 6 Amps Bake lite Ceiling Rose | Each | 78.0 | 78.0 | 25.0 | False | None | None | False | None | False | 1950.0 | 0 | | 2978104 | 98784 | None | code174 | Supplying of 1440 rpm heavy duty exhaust fan of 450mm (15") size with bracket blades suitable to operate on 230V, 50Hz, AC Supply complete - Group A | Each | 4446.0 | 4446.0 | 2.0 | False | None | None | False | None | False | 8892.0 | 0 | | 2978105 | 98784 | None | code175 | Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets with bolts and nuts and a 5Amps, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. | Each | 707.0 | 707.0 | 2.0 | False | None | None | False | None | False | 1414.0 | 0 | | 2978106 | 98784 | None | code176 | Supplying & fixing of porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers etc., complete. 63 Amps | Each | 401.0 | 401.0 | 2.0 | False | None | None | False | None | False | 802.0 | 0 | | 2978107 | 98784 | None | code177 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve , indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required Confirming to JEC 60898. Group-A a) 6 - 32 Amps DP | Each | 415.0 | 415.0 | 2.0 | False | None | None | False | None | False | 830.0 | 0 | | 2978108 | 98784 | None | code178 | Supplying and fixing one of 230 volts Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws. Ding Dong Bell with Remote | Each | 1190.0 | 1190.0 | 1.0 | False | None | None | False | None | False | 1190.0 | 0 | | 2978109 | 98784 | None | code179 | 1 To 3 Model Metal Boxes | Each | 138.0 | 138.0 | 12.0 | False | None | None | False | None | False | 1656.0 | 0 | | 2978110 | 98784 | None | code180 | 4 Model Metal Boxes | Each | 159.0 | 159.0 | 12.0 | False | None | None | False | None | False | 1908.0 | 0 | | 2978111 | 98784 | None | code181 | 6 Model Metal Boxes | Each | 220.0 | 220.0 | 12.0 | False | None | None | False | None | False | 2640.0 | 0 | | 2978112 | 98784 | None | code182 | 8 Model Metal Boxes | Each | 261.0 | 261.0 | 25.0 | False | None | None | False | None | False | 6525.0 | 0 | | 2978113 | 98784 | None | code183 | 10-12 Model Metal Boxes | Each | 363.0 | 363.0 | 10.0 | False | None | None | False | None | False | 3630.0 | 0 | | 2978114 | 98784 | None | code184 | 1 To 3 Model plates for boxes | Each | 161.0 | 161.0 | 20.0 | False | None | None | False | None | False | 3220.0 | 0 | | 2978115 | 98784 | None | code185 | 4 Model plates for boxes | Each | 175.0 | 175.0 | 15.0 | False | None | None | False | None | False | 2625.0 | 0 | | 2978116 | 98784 | None | code186 | 6 Model plates for boxes | Each | 234.0 | 234.0 | 10.0 | False | None | None | False | None | False | 2340.0 | 0 | | 2978117 | 98784 | None | code187 | 8 Model plates for boxes | Each | 284.0 | 284.0 | 25.0 | False | None | None | False | None | False | 7100.0 | 0 | | 2978118 | 98784 | None | code188 | 10-12 Model plates for boxes | Each | 344.0 | 344.0 | 10.0 | False | None | None | False | None | False | 3440.0 | 0 | | 2978119 | 98784 | None | code189 | 6 Amps one way Switches | Each | 102.0 | 102.0 | 15.0 | False | None | None | False | None | False | 1530.0 | 0 | | 2978120 | 98784 | None | code190 | 6 amps 2 way Switches | Each | 166.0 | 166.0 | 15.0 | False | None | None | False | None | False | 2490.0 | 0 | | 2978121 | 98784 | None | code191 | 6 amps 3 way socket | Each | 171.0 | 171.0 | 10.0 | False | None | None | False | None | False | 1710.0 | 0 | | 2978122 | 98784 | None | code192 | 16 Amps one way Switches | Each | 177.0 | 177.0 | 10.0 | False | None | None | False | None | False | 1770.0 | 0 | | 2978123 | 98784 | None | code193 | 16 amps 3 way socket | Each | 156.0 | 156.0 | 25.0 | False | None | None | False | None | False | 3900.0 | 0 | | 2978124 | 98784 | None | code194 | 32 Amps DP Switch | Each | 236.0 | 236.0 | 2.0 | False | None | None | False | None | False | 472.0 | 0 | | 2978125 | 98784 | None | code195 | LED Light Fitting 1 x 4 - 20/22 watts | Each | 690.0 | 690.0 | 15.0 | False | None | None | False | None | False | 10350.0 | 0 | | 2978126 | 98784 | None | code196 | LED Squre or Round Down Light 10 -12 Watts | Each | 885.0 | 885.0 | 15.0 | False | None | None | False | None | False | 13275.0 | 0 | | 2978127 | 98784 | None | code197 | LED Squre or Round Down Light 15 -18 Watts | Each | 1324.0 | 1324.0 | 15.0 | False | None | None | False | None | False | 19860.0 | 0 | | 2978128 | 98784 | None | code198 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 600W Dimmer | Each | 329.0 | 329.0 | 6.0 | False | None | None | False | None | False | 1974.0 | 0 | | 2978129 | 98784 | None | code199 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.1000-1200W Dimmer | Each | 180.0 | 180.0 | 6.0 | False | None | None | False | None | False | 1080.0 | 0 | | 2978130 | 98784 | None | code200 | Supplying and drawing UTP-CAT 6E LAN cable. | m | 38.0 | 38.0 | 350.0 | False | None | None | False | None | False | 13300.0 | 0 | | 2978131 | 98784 | None | code201 | Supplying and drawing PVC flexible one pair telephone
unarmoured tinned copper cable.
1 Pair | m | 15.0 | 15.0 | 100.0 | False | None | None | False | None | False | 1500.0 | 0 | | 2978132 | 98784 | None | code202 | Supplying and drawing PVC insulated gas injected physical
foam jelly flooded co-axial TV cable.RG-6. | m | 44.0 | 44.0 | 125.0 | False | None | None | False | None | False | 5500.0 | 0 | | 2978133 | 98784 | None | code203 | Supplying & Fixing of switch mounting rack with power manager & Cable manager.
4U with 450mm depth | Each | 4892.0 | 4892.0 | 4.0 | False | None | None | False | None | False | 19568.0 | 0 | | 2978134 | 98784 | None | code204 | Supplying & Fixing of Power strip | Each | 1457.0 | 1457.0 | 4.0 | False | None | None | False | None | False | 5828.0 | 0 | | 2978135 | 98784 | None | code205 | 8 Port 10/100/1000 Switch | Each | 3100.0 | 3100.0 | 4.0 | False | None | None | False | None | False | 12400.0 | 0 | | 2978136 | 98784 | None | code206 | Supplying & fixing of I/O socket with back box
Single I/O | Each | 490.0 | 490.0 | 25.0 | False | None | None | False | None | False | 12250.0 | 0 | | 2978137 | 98784 | None | code207 | Supplying & Fixing of ... ms Cat 6 Patch Cable 2 m | Each | 257.0 | 257.0 | 25.0 | False | None | None | False | None | False | 6425.0 | 0 | | 2978138 | 98784 | None | code208 | 10 Pair | Mtr | 345.0 | 345.0 | 2.0 | False | None | None | False | None | False | 690.0 | 0 | | 2978139 | 98784 | None | code209 | Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction.
(KPWD SR 2023-24,Vol-3, It.No.3.7) | Cum | 110.25 | 110.25 | 240.0 | False | None | None | False | None | False | 26460.0 | 0 | | 2978140 | 98784 | None | code210 | Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 For Grading -I Material
(KPWD SR 2022-23,Vol-3,It. No.4.1 (i)) | Cum | 2688.0 | 2688.0 | 120.0 | False | None | None | False | None | False | 322560.0 | 0 | | 2978141 | 98784 | None | code211 | Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates
(KPWD SR 2023-24,Vol-1,It. No.2.4.1) | Cum | 6724.2 | 6724.2 | 60.0 | False | None | None | False | None | False | 403452.0 | 0 | | 2978142 | 98784 | None | code212 | Providing and laying 60mm thick factory made precast M30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour laid in required pattern and including over 30mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineeri charge. (WMM/WBM Base to be paid separately if necessary as per relevant technical specification)(KPWD SR 2023-24,Vol3, It.No.6.8.1 | Sqm | 1121.4 | 1121.4 | 225.0 | False | None | None | False | None | False | 252315.0 | 0 | | 2978143 | 98784 | None | code213 | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete (WS and UGD CSR SR 2023-24 P.No:151 I.No:112.1.1
A] Borewell depth of 0 to 50.00 mtrs. | Mtr | 370.0 | 370.0 | 50.0 | False | None | None | False | None | False | 18500.0 | 0 | | 2978144 | 98784 | None | code214 | Borewell depth of 50 to 100.00 mtrs | Mtr | 464.0 | 464.0 | 50.0 | False | None | None | False | None | False | 23200.0 | 0 | | 2978145 | 98784 | None | code215 | Borewell depth of 100 to 150.00 mtrs. | Mtr | 493.0 | 493.0 | 50.0 | False | None | None | False | None | False | 24650.0 | 0 | | 2978146 | 98784 | None | code216 | Borewell depth of 150 to 200.00 mtrs. | Mtr | 449.0 | 449.0 | 50.0 | False | None | None | False | None | False | 22450.0 | 0 | | 2978147 | 98784 | None | code217 | Supply of ISI mark 175mm nominal bore,plain and steel casing pipegrade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, materialand conforming to IS 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m bothends.threaded conforming to IS 554-1985 one end fixed with socket conforming to IS 4270-2001 and the other end with screwed pipes all shall be responsibaly free from defects. The tubes shall be responsible straight end should be with ISI marking weighing 25.10kg/m.prices include Collar-Medium duty.(WS and UGD CSR SR 2023-24 P.No:143 I.No:12.32) | Mtr | 1933.0 | 1933.0 | 200.0 | False | None | None | False | None | False | 386600.0 | 0 | | 2978148 | 98784 | None | code218 | Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per necessary ammendments and instructions of engineer incharge of work. For 5 HP- 90 LPM @ 110 m = 15 STG Outlet Dia - 2.00” (WS and UGD CSR SR 2023-24 P.No:152 I.No:13.13.6) | Each | 32137.0 | 32137.0 | 1.0 | False | None | None | False | None | False | 32137.0 | 0 | | 2978149 | 98784 | None | code219 | Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments.1x3x2.5 m2 (WS and UGD CSR SR 2023-24 P.No:154 I.No:13.22.2) | Mtr | 85.0 | 85.0 | 300.0 | False | None | None | False | None | False | 25500.0 | 0 | | 2978150 | 98784 | None | code220 | Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments.50mm (WS and UGD CSR SR 2023-24 P.No:154 I.No:13.24.1) | Each | 1250.0 | 1250.0 | 1.0 | False | None | None | False | None | False | 1250.0 | 0 | | 2978151 | 98784 | None | code221 | Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments. 50mm (WS and UGD CSR SR 2023-24 P.No:154 I.No:13.25.1) | Each | 1250.0 | 1250.0 | 1.0 | False | None | None | False | None | False | 1250.0 | 0 | | 2978152 | 98784 | None | code222 | Supply and delivery at site 50mm(2”) dia heavy duty unplasticized PVC Column pipes with heavy duty collars,rubber profile ring,vibration control profile ring,freezing and turbulence free leak proof EPDM ring with ISI mark with its latest amendments. (WS and UGD CSR SR 2021-22 P.No:163 I.No:34) | Mtr | 575.0 | 575.0 | 200.0 | False | None | None | False | None | False | 115000.0 | 0 | | 2978153 | 98784 | None | code223 | Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor typ e NOTE: 1) DOLx005fDirect Online Starter 2) S-D- Star Delta Starter Upto 6Hp Pumps (WS and UGD CSR SR 2023-24 P.No:155 I.No:13.23.2) | Each | 9550.0 | 9550.0 | 1.0 | False | None | None | False | None | False | 9550.0 | 0 | | 2978154 | 98784 | None | code224 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.. I.No. 13.34 pg.123 SR 2023-24 BR 9.00+AW@5%=0.45 Total=9.45 | l | 9.45 | 9.45 | 4000.0 | False | None | None | False | None | False | 37800.0 | 0 | | 2978155 | 98784 | None | code225 | Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work. (WS and UGD CSR SR 2023-24 P.No:156 I.No:13.32) | Job | 6500.0 | 6500.0 | 1.0 | False | None | None | False | None | False | 6500.0 | 0 | | 2978156 | 98784 | None | code226 | Labour charges for erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including cement concrete for foundation/bed etc,complete as per specification, with testing of as per instructions of engineer incharge of work (WS and UGD CSR SR 2023-24 P.No:156 I.No:13.33) | Job | 1350.0 | 1350.0 | 1.0 | False | None | None | False | None | False | 1350.0 | 0 | | 2978157 | 98784 | None | code227 | Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for PVC Pipes 32mm dia, 10Kg/Sqcm & class 5 (WS and UGD CSR SR 2023-24 P.No:113 I.No:10.1.2) | Mtr | 67.0 | 67.0 | 165.0 | False | None | None | False | None | False | 11055.0 | 0 | | 2978158 | 98784 | None | code228 | Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for PVC Pipes 25mm dia, 10Kg/Sqcm & class 5 (WS and UGD CSR SR 2023-24 P.No:113 I.No:10.1.1) | Mtr | 48.0 | 48.0 | 185.0 | False | None | None | False | None | False | 8880.0 | 0 | | 2978159 | 98784 | None | code229 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m
(KPWD SR 2021-22,Vol-1,It. No.1.14) | Cum | 107.1 | 107.1 | 234.0 | False | None | None | False | None | False | 25061.4 | 0 | | 2978160 | 98784 | None | code230 | Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction.
(KPWD SR 2021-22,Vol-3, It.No.3.7) | Cum | 110.25 | 110.25 | 117.0 | False | None | None | False | None | False | 12899.25 | 0 | | 2978161 | 98784 | None | code231 | Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 For Grading -I Material
(KPWD SR 2021-22,Vol-3,It. No.4.1 (i)) | Cum | 2688.0 | 2688.0 | 117.0 | False | None | None | False | None | False | 314496.0 | 0 | | 2978162 | 98784 | None | code232 | Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ m3, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 t vibratory roller, finishing and curing.
(KPWD SR 2021-22,Vol-3,It. No.6.1) | Cum | 5166.0 | 5166.0 | 58.5 | False | None | None | False | None | False | 302211.0 | 0 | | 2978163 | 98784 | None | code233 | Cement Concrete Pavement with OPC/PPC/PSC
Construction of M40 grade un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with Cement at 420 kg/m3, coarse and fine aggregate conforming to IS 383:2016, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design transported to site, laid with a paver finisher, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing
(KPWD SR 2021-22,Vol-3,It. No.6.2) | Cum | 11416.86 | 11416.86 | 58.5 | False | None | None | False | None | False | 667886.31 | 0 | | 2978164 | 98784 | None | code234 | Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately)
(KPWD SR 2021-22,Vol-2,It. No.11.32) | Kgs | 82.96 | 82.96 | 1205.04 | False | None | None | False | None | False | 99970.1184 | 0 |
|