createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1709806922100 version 7 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 5000.00 emd 680000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 10-04-2024 16:00:00 tenderQueryClose 02-04-2024 16:00:00 technicalBidOpen 12-04-2024 16:05:00 publishedDate 11-03-2024 11:31:00 publishedByPost BESCOM_GM_CIV_BNG publishedByUser KPE16137 - T G RAMAKRISHNA bidValidityPeriod 120 noOfCalls 1 preBidMeetingDate 21-03-2024 15:00:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson T G Ramakrishna splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber None mobileNumber 8277892569 tenderSupplierList None
tenderSchedule	createdTs 1709806922135 version 13 createdDate None modifiedDate None tenderNumber BESCOM/2023-24/BD/WORK_INDENT151 title Construction of N-2 Sub division and O&M unit section office of at Housing Board layout, KPTCL premises, BESCOM, Bangalore description Construction of N-2 Sub division and O&M unit section office of at Housing Board layout, KPTCL premises, BESCOM, Bangalore category WORKS categoryText Works ecv 45306845.47 deptName Bangalore Electricity Supply Company Limited status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn False location 3834 locationName BESCOM Corporate Office Civil Section Bengaluru provisionalAmount 46900000.0 groupOverheadTotal 6911213.71 fileNumber BESCOM/GM/Civil/2023-24/41
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1709806922000 1 None None Buildings Construction of N-2 Sub division and O&M unit section office of at Housing Board layout, KPTCL premises, BESCOM, Bangalore 38395631.76 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2958995 97811 None BOQ01 Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge. Cum 1829.3 1829.3 54.0 False None None False None False 98782.2 0 2958996 97811 None BOQ02 Demolishing R.C.C.work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.Ground floor Cum 2668.6 2668.6 2.0 False None None False None False 5337.2 0 2958997 97811 None BOQ03 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. Cum 530.2 530.2 38.0 False None None False None False 20147.6 0 2958998 97811 None BOQ04 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge to the appropriate disposal area. Cum 400.4 400.4 134.0 False None None False None False 53653.6 0 2958999 97811 None BOQ05 Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness.By Manual Means In area of light jungle 100 Sqm 1234.2 1234.2 8.85 False None None False None False 10922.67 0 2959000 97811 None BOQ06 Earth work in surface excavation for stripping, seating of bund, Road way, by manual means for lowering & leveling the ground for all works other than foundation & depth in all kinds of soil not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work. Cum 100.1 100.1 54.0 False None None False None False 5405.4 0 2959001 97811 None BOQ07 Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work.In all kinds of soils Depth upto 1.5 m Cum 266.2 266.2 664.0 False None None False None False 176756.8 0 2959002 97811 None BOQ08 Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work.Depth exceeding 1.5m, but not exceeding 3 m Cum 284.9 284.9 68.0 False None None False None False 19373.2 0 2959003 97811 None BOQ09 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc.in layers not exceeding 20cm in depth, consolidating Each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 292.6 292.6 179.0 False None None False None False 52375.4 0 2959004 97811 None BOQ10 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour, rolling, water, all materials, usage & all other appurtenaces required to complete the work. Cum 521.4 521.4 214.0 False None None False None False 111579.6 0 2959005 97811 None BOQ11 Providing and Filling in foundation with granite / trap broken metal 100mm.And down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour with all lead and lift complete as per specifications. Cum 2950.2 2950.2 22.0 False None None False None False 64904.4 0 2959006 97811 None BOQ12 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C./ Lindane 20% E.C.@ 3.19 l/Sqm including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. Sqm 129.8 129.8 323.8 False None None False None False 42029.24 0 2959007 97811 None BOQ13 Concrete, Formwork & reinforcement Providing and laying in position Cement Concrete for levelling course for all works in foundation.The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates Cum 6230.4 6230.4 37.68 False None None False None False 234761.472 0 2959008 97811 None BOQ14 Providing and laying in position Cement Concrete for levelling course for all works in foundation.The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates Cum 6838.7 6838.7 0.08 False None None False None False 547.096 0 2959009 97811 None BOQ15 Terrace Floor Cum 7043.86 7043.86 24.29 False None None False None False 171095.3594 0 2959010 97811 None BOQ16 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc.The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications Sqm0 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 6955.3 6955.3 32.38 False None None False None False 225212.614 0 2959011 97811 None BOQ17 Providing and laying in position Cement Concrete for all Foundation works.The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.Sqm5 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 6969.6 6969.6 131.0518 False None None False None False 913378.62528 0 2959012 97811 None BOQ18 Additionalities for form work for Isolated Footing @ 8% Cum 557.56 557.56 45.28 False None None False None False 25246.3168 0 2959013 97811 None BOQ19 Additionalities for form work for columns & walls upto plinth beam @ 70% Cum 4878.72 4878.72 31.82 False None None False None False 155240.8704 0 2959014 97811 None BOQ20 Additionalities for form work for plinth beam @ 50% Cum 3484.8 3484.8 13.8708 False None None False None False 48336.96384 0 2959015 97811 None BOQ21 Additionalities for form work for slab @ 50% Cum 3484.8 3484.8 3.85 False None None False None False 13416.48 0 2959016 97811 None BOQ22 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height.The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators.The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.(The cost of steel reinforcement, dowel bars & formwork to be paid separately) Sqm0 Design Mix Using 25 mm nominal size graded crushed coarse aggregates Cum 7527.3 7527.3 77.88 False None None False None False 586226.124 0 2959017 97811 None BOQ23 b) First Floor Cum 7602.57 7602.57 79.71 False None None False None False 606000.8547 0 2959018 97811 None BOQ24 c) Second Floor Cum 7677.85 7677.85 78.78 False None None False None False 604861.023 0 2959019 97811 None BOQ25 c) Third Floor Cum 7753.12 7753.12 77.86 False None None False None False 603657.9232 0 2959020 97811 None BOQ26 d) Terrace Floor Cum 7828.39 7828.39 4.24 False None None False None False 33192.3736 0 2959021 97811 None BOQ27 Additionalities for form work for columns @ 70%- Ground floor Cum 5269.11 5269.11 10.09 False None None False None False 53165.3199 0 2959022 97811 None BOQ28 Additionalities for form work for columns @ 70%- First floor Cum 5321.8 5321.8 10.09 False None None False None False 53696.962 0 2959023 97811 None BOQ29 Additionalities for form work for columns @ 70%- c) Second Floor Cum 5374.49 5374.49 10.09 False None None False None False 54228.6041 0 2959024 97811 None BOQ30 Additionalities for form work for columns @ 70%- d) Third Floor Cum 5427.18 5427.18 10.09 False None None False None False 54760.2462 0 2959025 97811 None BOQ31 Additionalities for form work for columns @ 70%- e) Terrace Floor Cum 5479.87 5479.87 1.32 False None None False None False 7233.4284 0 2959026 97811 None BOQ32 Additionalities for form work for Roof beam, Lintel beam @ 60%- Ground floor Cum 4516.38 4516.38 17.38 False None None False None False 78494.6844 0 2959027 97811 None BOQ33 Additionalities for form work for Roof beam, Lintel beam @ 60%- First floor Cum 4561.54 4561.54 18.92 False None None False None False 86304.3368 0 2959028 97811 None BOQ34 Additionalities for form work for Roof beam, Lintel beam @ 60%- c) Second Floor Cum 4606.71 4606.71 18.48 False None None False None False 85132.0008 0 2959029 97811 None BOQ35 Additionalities for form work for Roof beam, Lintel beam @ 60%- d) Third Floor Cum 4651.87 4651.87 16.96 False None None False None False 78895.7152 0 2959030 97811 None BOQ36 Additionalities for form work for Roof beam, Lintel beam @ 60%- e) Terrace Floor Cum 4697.04 4697.04 0.59 False None None False None False 2771.2536 0 2959031 97811 None BOQ37 Additionalities for form work for Roof slab @ 50%- Ground floor Cum 3763.65 3763.65 45.26 False None None False None False 170342.799 0 2959032 97811 None BOQ38 Additionalities for form work for Roof slab @ 50%- First floor Cum 3801.29 3801.29 45.26 False None None False None False 172046.3854 0 2959033 97811 None BOQ39 Additionalities for form work for Roof slab @ 50%- c) Second Floor Cum 3838.92 3838.92 45.26 False None None False None False 173749.5192 0 2959034 97811 None BOQ40 Additionalities for form work for Roof slab @ 50%- d) Third Floor Cum 3876.56 3876.56 45.26 False None None False None False 175453.1056 0 2959035 97811 None BOQ41 Additionalities for form work for Roof slab @ 50%- e) Terrace Floor Cum 3914.2 3914.2 2.15 False None None False None False 8415.53 0 2959036 97811 None BOQ42 Additionalities for form work for Chajja @ 45%- Ground floor Cum 3387.28 3387.28 1.509 False None None False None False 5111.40552 0 2959037 97811 None BOQ43 Additionalities for form work for Chajja @ 45%- First floor Cum 3421.16 3421.16 1.806 False None None False None False 6178.61496 0 2959038 97811 None BOQ44 Additionalities for form work for Chajja @ 45%- Second floor Cum 3455.03 3455.03 1.311 False None None False None False 4529.54433 0 2959039 97811 None BOQ45 Additionalities for form work for Chajja @ 45%- Third floor Cum 3488.9 3488.9 1.914 False None None False None False 6677.7546 0 2959040 97811 None BOQ46 Additionalities for form work for Chajja @ 45%- Terrace floor Cum 3522.77 3522.77 0.18 False None None False None False 634.0986 0 2959041 97811 None BOQ47 Additionalities for form work for Staircase @ 45%- Ground floor Cum 3387.28 3387.28 3.62 False None None False None False 12261.9536 0 2959042 97811 None BOQ48 Additionalities for form work for Staircase @ 45%- First floor Cum 3421.15 3421.15 3.62 False None None False None False 12384.563 0 2959043 97811 None BOQ49 Additionalities for form work for Staircase @ 45%- Second floor Cum 3455.03 3455.03 3.62 False None None False None False 12507.2086 0 2959044 97811 None BOQ50 Additionalities for form work for Staircase @ 45%- Third floor Cum 3488.9 3488.9 3.62 False None None False None False 12629.818 0 2959045 97811 None BOQ51 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.Ground floor Tonne 98402.7 98402.7 21.55 False None None False None False 2120578.185 0 2959046 97811 None BOQ52 b) First Floor Tonne 99386.72 99386.72 10.92 False None None False None False 1085302.9824 0 2959047 97811 None BOQ53 c) Second Floor Tonne 100370.75 100370.75 10.8 False None None False None False 1084004.1 0 2959048 97811 None BOQ54 d)Third Floor Tonne 101354.78 101354.78 10.63 False None None False None False 1077401.3114 0 2959049 97811 None BOQ55 e)Terrace Floor Tonne 102338.81 102338.81 0.67 False None None False None False 68567.0027 0 2959050 97811 None BOQ56 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 7027.9 7027.9 40.5 False None None False None False 284629.95 0 2959051 97811 None BOQ57 Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge. Sqm 280.5 280.5 97.0 False None None False None False 27208.5 0 2959052 97811 None BOQ58 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/Cum and minimum compressive strength of 4.00 N/mSqm conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.a) Ground floor Sqm 1441.0 1441.0 339.0 False None None False None False 488499.0 0 2959053 97811 None BOQ59 b) First floor Sqm 1455.4 1455.4 362.0 False None None False None False 526854.8 0 2959054 97811 None BOQ60 c) Second Floor Sqm 1469.82 1469.82 394.0 False None None False None False 579109.08 0 2959055 97811 None BOQ61 d)Third Floor Sqm 1484.23 1484.23 346.0 False None None False None False 513543.58 0 2959056 97811 None BOQ62 e)Terrace Floor Sqm 1498.64 1498.64 46.0 False None None False None False 68937.44 0 2959057 97811 None BOQ63 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/Cum and minimum compressive strength of 4.00 N/mSqm conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.a) Ground floor Sqm 1214.4 1214.4 45.0 False None None False None False 54648.0 0 2959058 97811 None BOQ64 b) First floor Sqm 1226.54 1226.54 45.0 False None None False None False 55194.3 0 2959059 97811 None BOQ65 c) Second Floor Sqm 1238.68 1238.68 45.0 False None None False None False 55740.6 0 2959060 97811 None BOQ66 d) Third Floor Sqm 1250.83 1250.83 45.0 False None None False None False 56287.35 0 2959061 97811 None BOQ67 Providing and fixing in position Fixed 10mm toughened glass as fixed glass from Floor to available Ceiling level for Partitions.The work includes cost of all materials, approved hardware, fixing the same as per site conditions to a neat finished work as per drawings and directions etc., complete. Sqm 4800.0 4800.0 43.0 False None None False None False 206400.0 0 2959062 97811 None BOQ68 b) First floor Sqm 4800.0 4800.0 18.0 False None None False None False 86400.0 0 2959063 97811 None BOQ69 c) Second Floor Sqm 4800.0 4800.0 46.0 False None None False None False 220800.0 0 2959064 97811 None BOQ70 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc.for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.200mm length Sqm 5194.2 5194.2 11.4 False None None False None False 59213.88 0 2959065 97811 None BOQ71 b) First floor Sqm 5246.14 5246.14 9.5 False None None False None False 49838.33 0 2959066 97811 None BOQ72 c) Second Floor Sqm 5298.08 5298.08 5.7 False None None False None False 30199.056 0 2959067 97811 None BOQ73 Providing and fixing stainless steel 304 grade fancy handle of approved make fixed with SS screws etc.complete as per direction of Engineer-incharge.200mm length Nos 1650.0 1650.0 12.0 False None None False None False 19800.0 0 2959068 97811 None BOQ74 b) First floor Nos 1666.5 1666.5 10.0 False None None False None False 16665.0 0 2959069 97811 None BOQ75 c) Second Floor Nos 1683.0 1683.0 6.0 False None None False None False 10098.0 0 2959070 97811 None BOQ76 Glass door locks MR Sqm 1500.0 1500.0 6.0 False None None False None False 9000.0 0 2959071 97811 None BOQ77 b) First floor Sqm 1515.0 1515.0 5.0 False None None False None False 7575.0 0 2959072 97811 None BOQ78 c) Second Floor Sqm 1530.0 1530.0 3.0 False None None False None False 4590.0 0 2959073 97811 None BOQ79 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/Cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mSqm , modulus of elasticity 900 N/mSqm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge.(Fixtures shall be paid for separately) Size 62 x 100mm Mtr 772.2 772.2 36.4 False None None False None False 28108.08 0 2959074 97811 None BOQ80 b) First floor Mtr 779.92 779.92 36.4 False None None False None False 28389.088 0 2959075 97811 None BOQ81 c) Second Floor Mtr 787.64 787.64 36.4 False None None False None False 28670.096 0 2959076 97811 None BOQ82 d)Third Floor Mtr 795.36 795.36 36.4 False None None False None False 28951.104 0 2959077 97811 None BOQ83 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/Cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mSqm , modulus of elasticity 850 N/mSqm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately) 35 mm thickness Sqm 4445.1 4445.1 11.8 False None None False None False 52452.18 0 2959078 97811 None BOQ84 b) First floor Sqm 4489.55 4489.55 11.8 False None None False None False 52976.69 0 2959079 97811 None BOQ85 c) Second Floor Sqm 4534.0 4534.0 11.8 False None None False None False 53501.2 0 2959080 97811 None BOQ86 d) Third floor Sqm 4578.45 4578.45 11.8 False None None False None False 54025.71 0 2959081 97811 None BOQ87 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc.complete Nos 143.0 143.0 12.0 False None None False None False 1716.0 0 2959082 97811 None BOQ88 b) First floor Nos 144.43 144.43 12.0 False None None False None False 1733.16 0 2959083 97811 None BOQ89 c) Second Floor Nos 145.85 145.85 12.0 False None None False None False 1750.2 0 2959084 97811 None BOQ90 d) Third floor Nos 147.29 147.29 12.0 False None None False None False 1767.48 0 2959085 97811 None BOQ91 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc.complete Nos 260.7 260.7 12.0 False None None False None False 3128.4 0 2959086 97811 None BOQ92 b) First floor Nos 263.3 263.3 12.0 False None None False None False 3159.6 0 2959087 97811 None BOQ93 c) Second Floor Nos 265.91 265.91 12.0 False None None False None False 3190.92 0 2959088 97811 None BOQ94 d) Third floor Nos 268.52 268.52 12.0 False None None False None False 3222.24 0 2959089 97811 None BOQ95 Providing and fixing M.S.grills of required pattern in frames of windows etc.with M.S.flats, square or round bars etc.including priming coat with approved steel primer all complete.Fixed to openings / wooden frames with rawl plugs screws etc.a) Ground floor Kg 201.3 201.3 489.0 False None None False None False 98435.7 0 2959090 97811 None BOQ96 b) First floor Kg 203.31 203.31 659.0 False None None False None False 133981.29 0 2959091 97811 None BOQ97 c) Second Floor Kg 205.32 205.32 422.0 False None None False None False 86645.04 0 2959092 97811 None BOQ98 d) Third floor Kg 207.33 207.33 716.0 False None None False None False 148448.28 0 2959093 97811 None BOQ99 e)Terrace Floor Kg 209.35 209.35 38.0 False None None False None False 7955.3 0 2959094 97811 None BOQ100 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame.The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm.Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm.Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock.Wall thickness of frame & sash shall be of 2mm-2.5mm.Maximum possible size 2419mm x 2200mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) a) Ground floor Sqm 7407.4 7407.4 24.0 False None None False None False 177777.6 0 2959095 97811 None BOQ101 b) First floor Sqm 7481.47 7481.47 32.0 False None None False None False 239407.04 0 2959096 97811 None BOQ102 c) Second Floor Sqm 7555.54 7555.54 21.0 False None None False None False 158666.34 0 2959097 97811 None BOQ103 d) Third floor Sqm 7629.62 7629.62 35.0 False None None False None False 267036.7 0 2959098 97811 None BOQ104 d)Terrace Floor Sqm 7703.69 7703.69 2.0 False None None False None False 15407.38 0 2959099 97811 None BOQ105 Supplying and fixing rolling shutters of approved make, made of required size M.S.laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S.top cover of required thickness for rolling shutters.80x0.90 mm M.S.laths with 0.90 mm thick top cover Sqm 2502.5 2502.5 27.0 False None None False None False 67567.5 0 2959100 97811 None BOQ106 Providing and fixing ball bearing for rolling shutters including cost of materials, labour, usage charges of machinery complete Nos 443.3 443.3 12.0 False None None False None False 5319.6 0 2959101 97811 None BOQ107 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 621.5 621.5 181.0 False None None False None False 112491.5 0 2959102 97811 None BOQ108 b) First floor Kg 627.71 627.71 181.0 False None None False None False 113615.51 0 2959103 97811 None BOQ109 c) Second Floor Kg 633.93 633.93 181.0 False None None False None False 114741.33 0 2959104 97811 None BOQ110 d) Third floor Kg 640.14 640.14 181.0 False None None False None False 115865.34 0 2959105 97811 None BOQ111 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc.complete.Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 161.7 161.7 1050.0 False None None False None False 169785.0 0 2959106 97811 None BOQ112 Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc.as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in- Charge. Kg 149.6 149.6 1500.0 False None None False None False 224400.0 0 2959107 97811 None BOQ113 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including cost of materials ,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Sqm 9103.6 9103.6 8.0 False None None False None False 72828.8 0 2959108 97811 None BOQ114 Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications Cum 151881.4 151881.4 0.1 False None None False None False 15188.14 0 2959109 97811 None BOQ115 b) First floor Cum 153400.21 153400.21 0.1 False None None False None False 15340.021 0 2959110 97811 None BOQ116 c) Second Floor Cum 154919.03 154919.03 0.1 False None None False None False 15491.903 0 2959111 97811 None BOQ117 d) Third floor Cum 156437.84 156437.84 0.1 False None None False None False 15643.784 0 2959112 97811 None BOQ118 Providing and fixing in position Honnewood fully panelled shutters for windows with stiles and rails of 35mm.thick, 75mm wide in two halves with panels of 25mm thick including cost of materials, labour charges, usage charges complete as per specifications.(excluding cost of fixtures). Sqm 8331.4 8331.4 3.2 False None None False None False 26660.48 0 2959113 97811 None BOQ119 b) First floor Sqm 8414.71 8414.71 3.2 False None None False None False 26927.072 0 2959114 97811 None BOQ120 c) Second Floor Sqm 8498.02 8498.02 3.2 False None None False None False 27193.664 0 2959115 97811 None BOQ121 d) Third floor Sqm 8581.34 8581.34 3.2 False None None False None False 27460.288 0 2959116 97811 None BOQ122 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m.including cost of materials, labour charges, complete as per specifications. Nos 1117.6 1117.6 1.0 False None None False None False 1117.6 0 2959117 97811 None BOQ123 b) First floor Nos 1128.77 1128.77 1.0 False None None False None False 1128.77 0 2959118 97811 None BOQ124 c) Second Floor Nos 1139.95 1139.95 1.0 False None None False None False 1139.95 0 2959119 97811 None BOQ125 d) Third floor Nos 1151.12 1151.12 1.0 False None None False None False 1151.12 0 2959120 97811 None BOQ126 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc.complete. Nos 1157.2 1157.2 2.0 False None None False None False 2314.4 0 2959121 97811 None BOQ127 b) First floor Nos 1168.77 1168.77 2.0 False None None False None False 2337.54 0 2959122 97811 None BOQ128 c) Second Floor Nos 1180.34 1180.34 2.0 False None None False None False 2360.68 0 2959123 97811 None BOQ129 d) Third floor Nos 1191.91 1191.91 2.0 False None None False None False 2383.82 0 2959124 97811 None BOQ130 Providing and fixing bright finished brass handles with screws etc.complete: Brass handles 125 mm with plate 175x32 mm Each 273.9 273.9 2.0 False None None False None False 547.8 0 2959125 97811 None BOQ131 b) First floor Each 276.63 276.63 2.0 False None None False None False 553.26 0 2959126 97811 None BOQ132 c) Second Floor Each 279.37 279.37 2.0 False None None False None False 558.74 0 2959127 97811 None BOQ133 d) Third floor Each 282.11 282.11 2.0 False None None False None False 564.22 0 2959128 97811 None BOQ134 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Tower Bolts 250x10mm Nos 220.0 220.0 3.0 False None None False None False 660.0 0 2959129 97811 None BOQ135 b) First floor Nos 222.2 222.2 3.0 False None None False None False 666.6 0 2959130 97811 None BOQ136 c) Second Floor Nos 224.4 224.4 3.0 False None None False None False 673.2 0 2959131 97811 None BOQ137 d) Third floor Nos 226.6 226.6 3.0 False None None False None False 679.8 0 2959132 97811 None BOQ138 Providing and fixing PTMT door catcher of length 72 mm and dia.of 42 mm with suitable washers weighing not less than 33 gms Nos 60.5 60.5 1.0 False None None False None False 60.5 0 2959133 97811 None BOQ139 b) First floor Nos 61.1 61.1 1.0 False None None False None False 61.1 0 2959134 97811 None BOQ140 c) Second Floor Nos 61.71 61.71 1.0 False None None False None False 61.71 0 2959135 97811 None BOQ141 d) Third floor Nos 62.31 62.31 1.0 False None None False None False 62.31 0 2959136 97811 None BOQ142 Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1.The surface to be polished is rubbed with sand paper 80/120 Nosand then with sand paper of 160/180 nos.2.Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs.3.On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc.Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.4.On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion.This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs.The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge.(Final coat to be done in 1 or 2 layers without gap of time.) Sqm 744.7 744.7 3.2 False None None False None False 2383.04 0 2959137 97811 None BOQ143 b) First floor Sqm 752.14 752.14 3.2 False None None False None False 2406.848 0 2959138 97811 None BOQ144 c) Second Floor Sqm 759.59 759.59 3.2 False None None False None False 2430.688 0 2959139 97811 None BOQ145 d) Third floor Sqm 767.04 767.04 3.2 False None None False None False 2454.528 0 2959140 97811 None BOQ146 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412.The waterproofing membrane to be applied in 2coats @ 1.6 kg/Sqm to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/Sqm and protection with 120gsm Geo-textile over the waterproofing membrane.The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification Sqm 925.66 925.66 323.0 False None None False None False 298988.18 0 2959141 97811 None BOQ147 Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acrylic PU dispersion with highly elastic and UV resistant water proofing treatment to the Existing Roof surface/Chajjas/Sunken portion of WC:Bathroom applied @ 1.2L/per Sqm,having tensile strength greater than 1.5N/mSqm, elongation greater than 300% with solid content not less than 60% in 2 coats including surface preparation, priming the surface with water based acrylic primer @0.1 L/Sqm, and spreading 60 gsm geotextile between two top coats completely as per specification.The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. Sqm 810.7 810.7 85.0 False None None False None False 68909.5 0 2959142 97811 None BOQ148 Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately)..Size of Tile 600x1200 mm Sqm 2189.0 2189.0 182.0 False None None False None False 398398.0 0 2959143 97811 None BOQ149 b) First floor Sqm 2210.89 2210.89 193.0 False None None False None False 426701.77 0 2959144 97811 None BOQ150 c) Second Floor Sqm 2232.77 2232.77 191.0 False None None False None False 426459.07 0 2959145 97811 None BOQ151 d) Third floor Sqm 2254.66 2254.66 265.0 False None None False None False 597484.9 0 2959146 97811 None BOQ152 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ Sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm Sqm 1259.5 1259.5 31.0 False None None False None False 39044.5 0 2959147 97811 None BOQ153 b) First floor Sqm 1272.09 1272.09 21.0 False None None False None False 26713.89 0 2959148 97811 None BOQ154 c) Second Floor Sqm 1284.69 1284.69 30.0 False None None False None False 38540.7 0 2959149 97811 None BOQ155 d) Third floor Sqm 1297.28 1297.28 30.0 False None None False None False 38918.4 0 2959150 97811 None BOQ156 Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) greater than 78, solar reflection greater than 0.70 and initial emittance greater than 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner as per direction of incharge. d) Terrace Floor Sqm 1591.86 1591.86 10.0 False None None False None False 15918.6 0 2959151 97811 None BOQ157 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Sqm 229.9 229.9 1154.0 False None None False None False 265304.6 0 2959152 97811 None BOQ158 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc.all complete as specified and as directed by the Engineer-in-Charge.** Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. Sqm 3137.2 3137.2 84.185 False None None False None False 264105.182 0 2959153 97811 None BOQ159 b) First floor Sqm 3168.57 3168.57 84.185 False None None False None False 266746.06545 0 2959154 97811 None BOQ160 c) Second Floor Sqm 3199.94 3199.94 84.185 False None None False None False 269386.9489 0 2959155 97811 None BOQ161 d) Third floor Sqm 3231.31 3231.31 84.185 False None None False None False 272027.83235 0 2959156 97811 None BOQ162 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Sqm 1593.9 1593.9 106.0 False None None False None False 168953.4 0 2959157 97811 None BOQ163 b) First floor Sqm 1609.83 1609.83 106.0 False None None False None False 170641.98 0 2959158 97811 None BOQ164 c) Second Floor Sqm 1625.77 1625.77 106.0 False None None False None False 172331.62 0 2959159 97811 None BOQ165 Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc.complete as per design approved by Engineer-in-charge. Sqm 360.8 360.8 5.0 False None None False None False 1804.0 0 2959160 97811 None BOQ166 Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc.all complete as per the direction of Engineer-in-charge. Sqm 880.0 880.0 151.0 False None None False None False 132880.0 0 2959161 97811 None BOQ167 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.Internal wall plastering. Sqm 306.9 306.9 706.0 False None None False None False 216671.4 0 2959162 97811 None BOQ168 b) First floor Sqm 309.96 309.96 772.0 False None None False None False 239289.12 0 2959163 97811 None BOQ169 c) Second Floor Sqm 313.03 313.03 821.0 False None None False None False 256997.63 0 2959164 97811 None BOQ170 d) Third floor Sqm 316.1 316.1 743.0 False None None False None False 234862.3 0 2959165 97811 None BOQ171 d)Terrace Floor Sqm 319.17 319.17 59.0 False None None False None False 18831.03 0 2959166 97811 None BOQ172 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.Rough plastering. Sqm 383.9 383.9 56.0 False None None False None False 21498.4 0 2959167 97811 None BOQ173 b) First floor Sqm 387.73 387.73 56.0 False None None False None False 21712.88 0 2959168 97811 None BOQ174 c) Second Floor Sqm 391.57 391.57 56.0 False None None False None False 21927.92 0 2959169 97811 None BOQ175 d) Third floor Sqm 395.41 395.41 56.0 False None None False None False 22142.96 0 2959170 97811 None BOQ176 d)Terrace Floor Sqm 399.25 399.25 56.0 False None None False None False 22358.0 0 2959171 97811 None BOQ177 Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Ceiling Plastering. Sqm 355.3 355.3 318.0 False None None False None False 112985.4 0 2959172 97811 None BOQ178 b) First floor Sqm 358.85 358.85 318.0 False None None False None False 114114.3 0 2959173 97811 None BOQ179 c) Second Floor Sqm 362.4 362.4 318.0 False None None False None False 115243.2 0 2959174 97811 None BOQ180 d) Third floor Sqm 365.95 365.95 318.0 False None None False None False 116372.1 0 2959175 97811 None BOQ181 d)Terrace Floor Sqm 369.51 369.51 15.0 False None None False None False 5542.65 0 2959176 97811 None BOQ182 Providing and fixing Jute mat on ceiling soffit during roof slab concrte to create a rough surface for ceiling plastering MR Sqm 35.0 35.0 1287.0 False None None False None False 45045.0 0 2959177 97811 None BOQ183 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. External Plastering Sqm 423.5 423.5 265.0 False None None False None False 112227.5 0 2959178 97811 None BOQ184 b) First floor Sqm 427.73 427.73 265.0 False None None False None False 113348.45 0 2959179 97811 None BOQ185 c) Second Floor Sqm 431.96 431.96 265.0 False None None False None False 114469.4 0 2959180 97811 None BOQ186 d) Third floor Sqm 436.2 436.2 265.0 False None None False None False 115593.0 0 2959181 97811 None BOQ187 Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof including cost of material, labour, scaffolding etc as per specifications and as per directions of the Engineer-in-Charge. Sqm 63.8 63.8 265.0 False None None False None False 16907.0 0 2959182 97811 None BOQ188 b) First floor Sqm 64.43 64.43 265.0 False None None False None False 17073.95 0 2959183 97811 None BOQ189 c) Second Floor Sqm 65.07 65.07 265.0 False None None False None False 17243.55 0 2959184 97811 None BOQ190 d) Third floor Sqm 65.71 65.71 265.0 False None None False None False 17413.15 0 2959185 97811 None BOQ191 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/Sqm width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications.( length of mesh only be measured for payment Plaster mesh 100mm wide Mtr 48.4 48.4 600.0 False None None False None False 29040.0 0 2959186 97811 None BOQ192 b) First floor Mtr 48.88 48.88 600.0 False None None False None False 29328.0 0 2959187 97811 None BOQ193 c) Second Floor Mtr 49.36 49.36 600.0 False None None False None False 29616.0 0 2959188 97811 None BOQ194 d) Third floor Mtr 49.85 49.85 600.0 False None None False None False 29910.0 0 2959189 97811 None BOQ195 d)Terrace Floor Mtr 50.33 50.33 140.0 False None None False None False 7046.2 0 2959190 97811 None BOQ196 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Mtr 110.0 110.0 1024.0 False None None False None False 112640.0 0 2959191 97811 None BOQ197 b) First floor Mtr 111.1 111.1 1090.0 False None None False None False 121099.0 0 2959192 97811 None BOQ198 c) Second Floor Mtr 112.2 112.2 821.0 False None None False None False 92116.2 0 2959193 97811 None BOQ199 d) Third floor Mtr 113.3 113.3 743.0 False None None False None False 84181.9 0 2959194 97811 None BOQ200 d)Terrace Floor Mtr 114.4 114.4 59.0 False None None False None False 6749.6 0 2959195 97811 None BOQ201 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content.With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre as per specifications and as per directions of Engineer in charge. Sqm 58.3 58.3 1024.0 False None None False None False 59699.2 0 2959196 97811 None BOQ202 b) First floor Sqm 58.88 58.88 1090.0 False None None False None False 64179.2 0 2959197 97811 None BOQ203 c) Second Floor Sqm 59.46 59.46 1139.0 False None None False None False 67724.94 0 2959198 97811 None BOQ204 d) Third floor Sqm 60.04 60.04 1061.0 False None None False None False 63702.44 0 2959199 97811 None BOQ205 d)Terrace Floor Sqm 60.63 60.63 59.0 False None None False None False 3577.17 0 2959200 97811 None BOQ206 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.Two coats as per specifications and as per directions of Engineer in charge. Sqm 121.0 121.0 1024.0 False None None False None False 123904.0 0 2959201 97811 None BOQ207 b) First floor Sqm 122.21 122.21 1090.0 False None None False None False 133208.9 0 2959202 97811 None BOQ208 c) Second Floor Sqm 123.42 123.42 1090.0 False None None False None False 134527.8 0 2959203 97811 None BOQ209 d) Third floor Sqm 124.63 124.63 1090.0 False None None False None False 135846.7 0 2959204 97811 None BOQ210 d)Terrace Floor Sqm 125.84 125.84 59.0 False None None False None False 7424.56 0 2959205 97811 None BOQ211 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 191.4 191.4 265.0 False None None False None False 50721.0 0 2959206 97811 None BOQ212 b) First floor Sqm 193.31 193.31 265.0 False None None False None False 51227.15 0 2959207 97811 None BOQ213 c) Second Floor Sqm 195.22 195.22 265.0 False None None False None False 51733.3 0 2959208 97811 None BOQ214 d) Third floor Sqm 197.14 197.14 265.0 False None None False None False 52242.1 0 2959209 97811 None BOQ215 d)Terrace Floor Sqm 199.05 199.05 125.0 False None None False None False 24881.25 0 2959210 97811 None BOQ216 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 183.7 183.7 150.0 False None None False None False 27555.0 0 2959211 97811 None BOQ217 Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc.all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge.The IGUs shall be assembled in the factory/workshop of the glass processor.(Payment for fixing of IGU Panels in the curtain glazing is included in cost of item Nos18.2)For payment, only the actual area of glass on face 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in Sqm.(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25-0.28) and U value of 3.0 to 3.3 W/Sqm degree K etc.The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement. Sqm 3347.3 3347.3 60.0 False None None False None False 200838.0 0 2959212 97811 None BOQ218 Design supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III).The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21 mm thick.The Glass fins and glass panel assembly shall be connected to Slab/ beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved drawings.The complete system to be designed to accommodate hermal expansion & seismic movements etc.The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof.The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc.all complete.For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured. Sqm 8747.2 8747.2 12.0 False None None False None False 104966.4 0 2959213 97811 None BOQ219 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame.The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness.Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass.Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 6290.9 6290.9 27.0 False None None False None False 169854.3 0 2959214 97811 None BOQ220 Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat strengthened monolithic float glass of approved colour and shade with reflective soft coating on surface 2 of approved colour and shade so as to match the colour and shade of the IGUs in the vision panels etc.,all complete for the required performances as specified, as per the Architectural drawings, as per the approved shop drawings, as specified, and as directed by the Engineer- in- Charge.For payment, only the actual area of glass on face 1 of the glass panels (but excluding the area of grooves and weather silicone sealant) provided and fixed in position, shall be measured in Sqm.(Payment for fixing of Spandrel Glass Panels in the curtain glazing is included in cost of relevent Item).(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face 2, having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/Sqm K etc..The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement. Sqm 2178.0 2178.0 15.0 False None None False None False 32670.0 0 2959215 97811 None BOQ221 Providing and fixing of Aluminium composite panel of approved make and colour for wall cladding for Brick/Rcc/stone walls & coloumns/beams with necessary aluminium frame works at required level made out of 50x25x4mm C section or equivalent.The panel should consist of 3mm thick non-halogenated FR grade mineral based polymer ( 2 hrs fire resistance as per ASTM E119-12 and clause B, S1, do as per ENT 13501-1sandwiched between 0.50 skins thick aluminium sheet making a total panel thickness of 4mm.The surfaces will be finished with PVDF based coating on topsides and service coating on reverse sides would be in polyester paint.The system shall be fixed using GI brackets, aluminium L cleats and stainless steel bolts and nuts complete with spring washer and cap nuts and all other necessary accessories, sealing shall be done with necessary rods etc., complete For Straight portion Sqm 4387.9 4387.9 42.0 False None None False None False 184291.8 0 2959216 97811 None BOQ222 Providing, fabricating and fixing of 6 mm thick High Pressure Laminate sheets in standard size of 1200 mm x 2400 mm (Sheets can be supplied in customized length depending on requirement).Sheets shall be manufactured involving a series of mechanical process in a state-of-the-art facility shall comprise of 0.25 mm Aluminium skins on both sides sandwiching an LDPE (Low Density Poly Ethylene) core having a density of 0.92 g/cCum giving the overall weight of HPL at 7.8 kg/Sqm.Aluminium skins to have a desired lacquer in Lumiflon coated on one side/Both side.The supplied panels shall have a dexterity to be formed in convex and concave shapes as also the ability to bend in 90 degrees under a mechanical process.Panel will be installed on Aluminium tubes at 500 mm c/c distance with special L brackets.There will be special fixing treatment on all the corner sections.Aluminium tube size will be 25 mm x 50 mm.Boards will be fixed on the Aluminium channels with colour matched rivets/ MS polymer Adhesives and brackets through 8 mm drill hole in boards and 5 mm dia drill holes in aluminium box.Rivets will be installed by automatic rivet guns / adhesive should be used with proper silicone extrusion gun and properly laid over panel and aluminium tube on every 500mm gap as per direction of Engineer in charge.Wooden textured Colored sheets-Single sided Sqm 3434.2 3434.2 60.0 False None None False None False 206052.0 0 2959217 97811 None BOQ223 Providing and fabricating lacquered glass formed using Aluminium frame work at 600mm c/c.The frame work shall be clad with 8mm thick lacquered glass with 12mm thick MDF /ply backing, complete as per detailed drawing and instructions of the Architect.MR Sqm 7500.0 7500.0 8.0 False None None False None False 60000.0 0 2959218 97811 None BOQ224 Providing & fixing veneer panelling, over the 50mm x 35mm sal wood frame work at spacing not exceeding 600mm c/c fixed to the wall and top covered out of 4mm thick approved quality veneer, fixed over 12mm thick ply of approved brand, termite and water resitantfinished with melaminepolish, complete includingcost and conveyance of all materials, labour for all items of work HOM etc., complete as per specification Sqm 4112.9 4112.9 140.0 False None None False None False 575806.0 0 2959219 97811 None BOQ225 Providing, fabricating and fixing of 10 mm thick Decorative Grooved Bamboo Wood Wall cladding with panel size 1220mmx2440mm, thermal insulation value 2.2 J/g oC & having density 1300kg/Cum.The base material shall be of MDF and the surface of Bamboo shall be coated with Graphene based PU Coating.The material shall possess special properties such as Fire resistant, Thermal insulation, Sound absorbent and UV & Water resistant.The panel shall be fixed on walls using Mild steel screws or by using special adhesives as per direction of Engineer in charge. Sqm 2227.5 2227.5 47.0 False None None False None False 104692.5 0 2959220 97811 None BOQ226 Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 g/Sqm, both side inclusive) consisting of main ""T"" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross ""T"" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main ""T"" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross ""T"" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc.Main ""T"" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GIadjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T- sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing. Sqm 1288.1 1288.1 36.0 False None None False None False 46371.6 0 2959221 97811 None BOQ227 b) First floor Sqm 1300.98 1300.98 16.0 False None None False None False 20815.68 0 2959222 97811 None BOQ228 c) Second Floor Sqm 1313.86 1313.86 84.0 False None None False None False 110364.24 0 2959223 97811 None BOQ229 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S.sheets and galvanized with zinc coating of 120 gms/Sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I.channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm Each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I.intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I.wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS Certification marks only) Sqm 1081.3 1081.3 25.0 False None None False None False 27032.5 0 2959224 97811 None BOQ230 b) First floor Sqm 1092.11 1092.11 10.0 False None None False None False 10921.1 0 2959225 97811 None BOQ231 c) Second Floor Sqm 1102.92 1102.92 39.0 False None None False None False 43013.88 0 2959226 97811 None BOQ232 Providing and fixing VOX Soffit Infratop false ceiling SV 08, panel sizes of 300mmx2700mm , durable and resistant to moisture, water proof and free from borer-fungus-termite attack, thermal printing technology imitating closer finish to wood, click system for interlocking etc including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. MR Sqm 2600.0 2600.0 42.0 False None None False None False 109200.0 0 2959227 97811 None BOQ233 Providing and fixing CUBICLE WORKSTATIONS consisting of wings made out of 75 mm thick MS CRCA powder coated,tile based system for main and return spine, Top tile finish 8 mm thick MDF covered with Fabric of approved colour and one writing board (600 mm W) and one soft board (600 mm W) per workstation, Bottom tile finish 9 mm thick Laminate tile of approved colour, Raceway- one middle raceway (600mm W) below table top per workstation and continous raceway at the skirting level, Wire manager -ABS plastic grommet one number per table, Table top - 25 mm thick PLPB with straight table top End Table 25 mm thick PLPB with straightedge bound Hardware-MS powder coated corner bid, cantilever bkt, seperator hook on bkt, L bkt and Table joint plate., as per specifications, drawings and as directed by Engineer in charge.X type 4 wings 1500mmW x 1500mmD 1200mmH Nos 62000.0 62000.0 6.0 False None None False None False 372000.0 0 2959228 97811 None BOQ234 Supplying Black Medium Back Mesh chair of size 585mm(L)x585mm(W)x1040mm(H) with cushion seat and mesh back with cushion arms and nylon base with Pnuematic height adjustable system with wheel rollers complete as per specification. Make: Featherlite/Equivalent MR Nos 9500.0 9500.0 55.0 False None None False None False 522500.0 0 2959229 97811 None BOQ235 Supplying Black Low Back Mesh chair of size 485mm(L)x485mm(W)x1040mm(H) with cushion seat and mesh back with cushion arms and nylon base with Pnuematic height adjustable system with wheel rollers complete as per specification. Make: Featherlite/Equivalent MR Nos 7500.0 7500.0 32.0 False None None False None False 240000.0 0 2959230 97811 None BOQ236 Providing and fixing free standing table for cabin -without frames consisting of 25 mm thick PLPB table top, 25mm thick PLPB with edge bomded end table, 18mm thick PLPB with edge bonded modesty wire manager - ABS plastic grommet one number per table hardware - minfix assembly and screw leg., as per specifications, drawings and as directed by engineer in charge.Main table 2400mmW x750mmD x 750mmH top) Side Table : 900 mm W x 900mm DX 750 mm ht. Nos 45000.0 45000.0 1.0 False None None False None False 45000.0 0 2959231 97811 None BOQ237 Providing and fixing free standing table for cabin -without frames consisting of 25 mm thick PLPB table top, 25mm thick PLPB with edge bomded end table, 18mm thick PLPB with edge bonded modesty wire manager - ABS plastic grommet one number per table hardware - minfix assembly and screw leg., as per specifications, drawings and as directed by engineer in charge.Main table 2000mmW x750mmD x 750mmH top) Side Table : 900 mm W x 450mm DX 750 mm ht.ht. Nos 25000.0 25000.0 5.0 False None None False None False 125000.0 0 2959232 97811 None BOQ238 Providing and fixing free standing table for cabin -without frames consisting of 25 mm thick PLPB table top, 25mm thick PLPB with edge bomded end table, 18mm thick PLPB with edge bonded modesty wire manager - ABS plastic grommet one number per table hardware - minfix assembly and screw leg., as per specifications, drawings and as directed by engineer in charge.Main table 1500mmW x750mmD x 750mmH top) Side Table : 900 mm W x 450mm DX 750 mm ht.t. Nos 20000.0 20000.0 10.0 False None None False None False 200000.0 0 2959233 97811 None BOQ239 Providing and fixing meeting table consisting of 19 mm thick commerical board, table top edge bounded with 8mm corian Arcylic solid surface sheet for Top and Sides of the table, Hardware-Minifix assembly and screw leg., as per specifications, drawings and as directed by Engineer in charge..U shape Table , Table top 750 mm 6600 mm Dia X 2400 mm D X 750 mm Ht Nos 295000.0 295000.0 1.0 False None None False None False 295000.0 0 2959234 97811 None BOQ240 Supplying Liberate High Back Mesh chair of size 660mm(L)x660mm(W)x1250mm(H) with cushion seat and mesh back with cushion arms and chrome plated metal base with Pnuematic height adjustable system with wheel rollers complete as per specification.Make: Featherlite/Equivalent Nos 20000.0 20000.0 15.0 False None None False None False 300000.0 0 2959235 97811 None BOQ241 Providing and fixing 450mmw X 450 mmd X 685 mmht) Mobile pedestal unit - WOODEN with 18mm thick PLPB with edge bonded for body, Two equal drawer and one filing drawer with centralized locking system, Telescopic channels, castors, Handles and lock etc., MR Nos 5000.0 5000.0 20.0 False None None False None False 100000.0 0 2959236 97811 None BOQ242 Providing and fixing wardrobe with 19 mm thick block board with shutters and shelves,.8mm inside & 1.2 mm outside laminate/veneer of approved make on all exposed surfaces including necessary hardware , locks etc.edge painting , polishing etc.complete as per drawings.MR Sqm 11000.0 11000.0 18.0 False None None False None False 198000.0 0 2959237 97811 None BOQ243 Providing and fixing Reception Table In Brown -1 Drawer + 1 shutter unit - The PLPB (Wood Base) of Grade II. Nos 25000.0 25000.0 1.0 False None None False None False 25000.0 0 2959238 97811 None BOQ244 Providing and fixing Self adhesive wall paper for cabin - Peel and stick vinyl wall paper Sqm 400.0 400.0 24.0 False None None False None False 9600.0 0 2959239 97811 None BOQ245 Providing and fixing Record room Racks of following specification.Total Nosof Racks of size 2100mm H X 1300mm W X 450mm D with 3 compartment, Capacity of Flat Files considering 25mm thickness-16000 files (OR) Capacity of Box Files considering 90mm thickness-4480 files, Epoxy Powder Coated Finish, Load Bearing Capacity per Shelf (UDL): 150 Kgs.Single Faced Fixed(A) (5mx0.38mx2.1m) Nos 108000.0 108000.0 1.0 False None None False None False 108000.0 0 2959240 97811 None BOQ246 Double Faced Movable (B) (5mx0.76mx2.1m) Nos 210000.0 210000.0 7.0 False None None False None False 1470000.0 0 2959241 97811 None BOQ247 Single Faced Movable (C ) (5mx0.45mx2.1m) Nos 118200.0 118200.0 1.0 False None None False None False 118200.0 0 2959242 97811 None BOQ248 Providing and fixing storage unit of approved size & 450mm depth made out of 19mm thick commercial ply finished in approved 1.00mm laminate on both external & internal faces of approved colour and shade.Shelves shall be formed out of 19mm ply finished with 1.00mm laminate of approved shade and colour and 19mm thick shutters formed out of 19mm thick ply finished with 1.00mm thick laminate of approved shade and colour etc., complete the rate includes cost of all materials, labour charges, complete as per specification including necessary hardwares & fittings.MR Sqm 15000.0 15000.0 35.0 False None None False None False 525000.0 0 2959243 97811 None BOQ249 Providing & fixing Roller Blinds of reputed make 38mm round Aluminium channel with blackout fabric, telting with chain (Ball) system with all necessary fittings and fixtures as per direction of Engineer in charge Sqm 1980.0 1980.0 80.0 False None None False None False 158400.0 0 2959244 97811 None BOQ250 Providing and fixing directional signage as per the approved design Size - 1'6" x 6" MR Nos 1500.0 1500.0 20.0 False None None False None False 30000.0 0 2959245 97811 None BOQ251 Supply and fixing privacy film on the glass partition MR Sqm 1750.0 1750.0 36.0 False None None False None False 63000.0 0 2959246 97811 None BOQ252 Providing and fixing Three seater Sofa with cushion of size 7(L)x2.5(W) X2.75(H) ft made of upholstery fabric with seats fitted with padding, springs, webbing and as per direction of engineer in charge Nos 41250.0 41250.0 1.0 False None None False None False 41250.0 0 2959247 97811 None BOQ253 Providing and fixing Waiting Area Chair / 3 Seater Visitor Reception Heavy Chair in Chrome Finish (Stainless Steel) Nos 30000.0 30000.0 1.0 False None None False None False 30000.0 0 2959248 97811 None BOQ254 Providing and Fixing Hollow acrylic letters or logos which are approximately three inches thick.LEDs are embedded in the hollow space beneath these letters.These 3D letters and logos are mounted on an ACP box frame.This aluminium frame, along with the backlit acrylic letters, are then installed on-site.complete as per specification and instructions of the Architect.Letters of BESCOM External logosMR Nos 45000.0 45000.0 2.0 False None None False None False 90000.0 0 2959249 97811 None BOQ255 Providing and Fixing Hollow acrylic letters or logos which are approximately three inches thick.LEDs are embedded in the hollow space beneath these letters.These 3D letters and logos are mounted on an ACP box frame.This aluminium frame, along with the backlit acrylic letters, are then installed on-site.complete as per specification and instructions of the Architect.Letters of BESCOM logosMR Nos 35000.0 35000.0 2.0 False None None False None False 70000.0 0 2959250 97811 None BOQ256 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C.top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I.cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With common burnt clay (non modular) bricks of class designation 3.5 Each 11622.6 11622.6 4.0 False None None False None False 46490.4 0 2959251 97811 None BOQ257 Providing and fixing wash basin with C.I.brackets, 15 mm C.P.brass pillar taps, 32 mm C.P.brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P.brass pillar taps Nos 3152.6 3152.6 21.0 False None None False None False 66204.6 0 2959252 97811 None BOQ258 Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. Nos 15633.2 15633.2 16.0 False None None False None False 250131.2 0 2959253 97811 None BOQ259 Providing and fixing Bidet spray made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Premium Nos 1122.0 1122.0 10.0 False None None False None False 11220.0 0 2959254 97811 None BOQ260 Providing and fixing C.P.brass bib cock of approved quality conforming to IS:8931 Nos 698.5 698.5 35.0 False None None False None False 24447.5 0 2959255 97811 None BOQ261 Providing and fixing C.P.brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. Nos 797.5 797.5 40.0 False None None False None False 31900.0 0 2959256 97811 None BOQ262 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P.brass screws and washers complete. Nos 1342.0 1342.0 8.0 False None None False None False 10736.0 0 2959257 97811 None BOQ263 Providing and fixing Soap dish wired with 200mm width made of Stainless steel with all concealed fitting arrangements & all necessary accessories complete - Class Premium Nos 2333.1 2333.1 12.0 False None None False None False 27997.2 0 2959258 97811 None BOQ264 Providing and fixing Liquid soap dispenser made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Premium Nos 4196.5 4196.5 10.0 False None None False None False 41965.0 0 2959259 97811 None BOQ265 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I.brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 510x1040 mm bowl depth 250 mm Nos 6179.8 6179.8 2.0 False None None False None False 12359.6 0 2959260 97811 None BOQ266 Providing and fixing Pillar Cock made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Premium Nos 2876.5 2876.5 28.0 False None None False None False 80542.0 0 2959261 97811 None BOQ267 Providing and fixing Angle cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accessories complete - Class Premium Nos 2109.8 2109.8 35.0 False None None False None False 73843.0 0 2959262 97811 None BOQ268 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P.brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C.automatic flushing cistern Nos 4899.4 4899.4 9.0 False None None False None False 44094.6 0 2959263 97811 None BOQ269 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.20 mm dia pipe nominal OD pipes Mtr 416.9 416.9 195.0 False None None False None False 81295.5 0 2959264 97811 None BOQ270 CPVC 25 mm dia pipe nominal OD pipes Mtr 524.7 524.7 2.0 False None None False None False 1049.4 0 2959265 97811 None BOQ271 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20 mm nominal bore Nos 345.4 345.4 1.0 False None None False None False 345.4 0 2959266 97811 None BOQ272 Providing and fixing Brass full way valve gate with C.I.wheel of approved quality (screwed end) : 25 mm nominal bore Nos 603.9 603.9 4.0 False None None False None False 2415.6 0 2959267 97811 None BOQ273 Providing and fixing Brass full way valve gate with C.I.wheel of approved quality (screwed end) : 32 mm nominal bore Nos 657.8 657.8 1.0 False None None False None False 657.8 0 2959268 97811 None BOQ274 Providing and fixing Brass full way valve gate with C.I.wheel of approved quality (screwed end) : 40 mm nominal bore Nos 772.2 772.2 1.0 False None None False None False 772.2 0 2959269 97811 None BOQ275 Providing and fixing Brass full way valve gate with C.I.wheel of approved quality (screwed end) : 50 mm nominal bore Nos 940.5 940.5 25.0 False None None False None False 23512.5 0 2959270 97811 None BOQ276 Providing and fixing P.V.C.waste pipe for sink or wash basin including P.V.C.waste fittings complete.Semi rigid pipe 40 mm dia Nos 96.8 96.8 20.0 False None None False None False 1936.0 0 2959271 97811 None BOQ277 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms.with soft gravel or selected earth available from the excavation etc.complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc.for: PVC pipes 75mm dia., 6 kg/sqcm & class 3 Mtr 220.0 220.0 165.0 False None None False None False 36300.0 0 2959272 97811 None BOQ278 Supply and delivery at site special moulded variety PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments 75mm dia PVC couplers Nos 67.0 67.0 14.0 False None None False None False 938.0 0 2959273 97811 None BOQ279 Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 75 mm dia PVC Elbows Nos 192.0 192.0 14.0 False None None False None False 2688.0 0 2959274 97811 None BOQ280 Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 75 mm dia PVC tee Nos 117.0 117.0 8.0 False None None False None False 936.0 0 2959275 97811 None BOQ281 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms.with soft gravel or selected earth available from the excavation etc.complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc.for: PVC pipes 110mm dia., 6 kg/sqcm & class 3 Mtr 411.0 411.0 145.0 False None None False None False 59595.0 0 2959276 97811 None BOQ282 Supplying of special moulded variety PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments to walk site etc.complete 110mm dia PVC couplers Nos 171.0 171.0 12.0 False None None False None False 2052.0 0 2959277 97811 None BOQ283 Supplying of special moulded variety PVC Elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments to walk site etc.complete 110mm dia PVC Elbows Nos 302.0 302.0 12.0 False None None False None False 3624.0 0 2959278 97811 None BOQ284 Supplying of special moulded variety PVC Tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments to walk site etc.complete 110mm dia PVC Tee Nos 251.0 251.0 10.0 False None None False None False 2510.0 0 2959279 97811 None BOQ285 Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0 cm X 4.0 cm with all fitting arrangements & all necessary accessories complete Nos 268.4 268.4 22.0 False None None False None False 5904.8 0 2959280 97811 None BOQ286 Providing and fixing PVC (S.W.R) P Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete Nos 339.9 339.9 16.0 False None None False None False 5438.4 0 2959281 97811 None BOQ287 Providing and fixing PVC (S.W.R) Gully Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete Nos 380.6 380.6 12.0 False None None False None False 4567.2 0 2959282 97811 None BOQ288 Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete Nos 242.0 242.0 8.0 False None None False None False 1936.0 0 2959283 97811 None BOQ289 Supply and installation of solar heater on terrace, Non-pressurized solar heater capacity of 200 litre/day, heat reservation around 72hrs, 2kw Electric capacity.( Tata Bp Solar Water Heater ) Nos 40000.0 40000.0 1.0 False None None False None False 40000.0 0 2959284 97811 None BOQ290 Providing and fixing Brass full way valve gate with C.I.wheel of approved quality (screwed end) 25 mm nominal bore Nos 603.9 603.9 8.0 False None None False None False 4831.2 0 2959285 97811 None BOQ291 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.External work 20 mm nominal dia Pipes Mtr 238.7 238.7 205.0 False None None False None False 48933.5 0 2959286 97811 None BOQ292 CPVC 25 mm dia pipe nominal OD pipes Mtr 325.6 325.6 180.0 False None None False None False 58608.0 0 2959287 97811 None BOQ293 CPVC 32 mm dia pipe nominal OD pipes Mtr 409.2 409.2 198.0 False None None False None False 81021.6 0 2959288 97811 None BOQ294 CPVC 40 mm dia pipe nominal OD pipes Mtr 524.7 524.7 80.0 False None None False None False 41976.0 0 2959289 97811 None BOQ295 CPVC 50 mm dia pipe nominal OD pipes Mtr 793.1 793.1 90.0 False None None False None False 71379.0 0 2959290 97811 None BOQ296 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Ltr 9.9 9.9 5500.0 False None None False None False 54450.0 0 2959291 97811 None BOQ297 Providing and fixing of PVC Rungs footrest in under ground tanks/ manhole using Sqm0 concrete bed blocks for masonry walls or during construction for RCC surfaces, including cost of materias, labour, curing etccomplete as per specificationMR Nos 345.0 345.0 10.0 False None None False None False 3450.0 0 2959292 97811 None BOQ298 Supplying, fixing, testing and commisioning of PVC welded rain water head / khurras dome type grating with puddle flange to fix head in RCC slab specially fabricated from minimum 4mm thick PVC sheet, including removable heavy duty PVC grating of 50 x 3 mm thick PVC flats (Round or Square ) as per approved design.The quoted rate shall include for necessary grouting the khurras base with approved sealant complete all as shown in the drawing and as specified 150 x 150 mm PVC gratingMR Nos 955.0 955.0 2.0 False None None False None False 1910.0 0 2959293 97811 None BOQ299 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter Mtr 320.1 320.1 35.0 False None None False None False 11203.5 0 2959294 97811 None BOQ300 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc.excluding the cost of CI frame and cover. Nos 5454.0 5454.0 2.0 False None None False None False 10908.0 0 2959295 97811 None BOQ301 Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc.in layers not exceeding 20cm in depth, consolidating Each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work.In all kinds of soils.Depth upto 1.50m Mtr 532.4 532.4 45.0 False None None False None False 23958.0 0 2959296 97811 None BOQ302 Supplying, installing, testing and commissioning of submersible electrical driven pump 1set.to lift domestic water with all necessary arrangements to operate on 1HP Single Phase fitted on a common base frame accessories to lift the pump during maintenance, control panel with wiring from TPN switch to control panel and to the pump and the control panel comprising of O/L relays, single phase preventor,separate overload trip and relayset, ON/OFF/TRIP indicating lamps,start/stop push buttons, With liquid level controlers, etc., complete as complete.(MR) Duty of the Pump two set industrial type electronic automatic liquid level controllers, with stainless steel probes / sensors. Nos 12500.0 12500.0 1.0 False None None False None False 12500.0 0 2959297 97811 None BOQ303 Providing and fixing gun metal non- return valve of approved quality (screwed end) :32 mm nominal bore vertical Nos 764.5 764.5 3.0 False None None False None False 2293.5 0 2959298 97811 None BOQ304 Providing and fixing gun metal non- return valve of approved quality (screwed end) :40 mm nominal bore vertical Nos 1347.5 1347.5 3.0 False None None False None False 4042.5 0 2959299 97811 None BOQ305 Supply and fixing 600mm puddle flange consisting of 6mm thick welded MS plate, flanges of suitable size properly fixed in walls of water tanks as per specifications and approved drawings of following diameters. 32 mm diaMR Nos 800.0 800.0 4.0 False None None False None False 3200.0 0 2959300 97811 None BOQ306 40 mm diaMR Nos 952.0 952.0 4.0 False None None False None False 3808.0 0 2959301 97811 None BOQ307 50 mm diaMR Nos 1200.0 1200.0 4.0 False None None False None False 4800.0 0 2959302 97811 None BOQ308 Construction of percolation well / rain water harvest pit of 2 m dia and 3m deep with precast RCC rings, coveringthe top with RCC slab including supply and fixing 600 x 600 RCC MH cover CI / MS rungs etc.The quoted rate shall include earth work excavation, back filling, removing excess earth and making good the floor.The percolation well harvest pit shall be constructed as per the detail drawings and specification shall consists of: Allernate layers of brick bats, activated charcoal, gravel, pebbles and toped with fine sand for good infiltration.3 Nos.bore holes of 160 mm dia from the bottom of percolation pit for a depth of 6m, drilled by using auger manually.Bore hole to be filled with medium sized pebbles to provide mechanical strength to the holes and enhance infiltration.Rate quoted shall be inclusive of earth work excavation, back filling, removing of excess earth as per the instructions of engineer - in charge. Each 40000.0 40000.0 2.0 False None None False None False 80000.0 0 2959303 97811 None BOQ309 Open Conduit System Supplying heavy gauge PVC conduit pipe.......dia.......mm thick confirming to IS2509 with suitable size bends, junctionboxes, adhesivepasteetc, and fixing using inverted woodplugs incase of RCC ceiling and RCCwall/stone structure or rawlplugs incase of brickwalls and cement plastering the damaged portion using heavygauge saddles at an interval of 700mm using NF screws.19/20 mm dia 2 mm thick Mtr 69.0 69.0 260.0 False None None False None False 17940.0 0 2959304 97811 None BOQ310 b.25 mm dia 2 mm thick Mtr 81.0 81.0 125.0 False None None False None False 10125.0 0 2959305 97811 None BOQ311 c.32 mm dia 2.5 mm thick Mtr 106.0 106.0 75.0 False None None False None False 7950.0 0 2959306 97811 None BOQ312 Concealed Conduit System Supplying heavy gauge PVC conduit pipe......mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab.The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 19/20 mm dia 2 mm thick Mtr 66.0 66.0 750.0 False None None False None False 49500.0 0 2959307 97811 None BOQ313 b.25 mm dia 2 mm thick Mtr 78.0 78.0 400.0 False None None False None False 31200.0 0 2959308 97811 None BOQ314 c.32 mm dia 2.5 mm thick Mtr 103.0 103.0 250.0 False None None False None False 25750.0 0 2959309 97811 None BOQ315 Supplying heavy gauge PVC Conduit Pipe....dia.......mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing UorJ hooks and cement plastering upto the wall surface and run with 18SWG GIfishwire run throughout the conduit wherever necessary.19/20 mm dia 2 mm thick Mtr 68.0 68.0 100.0 False None None False None False 6800.0 0 2959310 97811 None BOQ316 b.25 mm dia 2 mm thick Mtr 79.0 79.0 350.0 False None None False None False 27650.0 0 2959311 97811 None BOQ317 c.32 mm dia 2.5 mm thick Mtr 99.0 99.0 45.0 False None None False None False 4455.0 0 2959312 97811 None BOQ318 Supplying and fixing PVC/metal conduit Deep junction box 19/20 mm deep Junction box Nos 49.0 49.0 75.0 False None None False None False 3675.0 0 2959313 97811 None BOQ319 b.25 mm deep Junction box Nos 56.0 56.0 180.0 False None None False None False 10080.0 0 2959314 97811 None BOQ320 c.32 mm deep Junction box Nos 61.0 61.0 30.0 False None None False None False 1830.0 0 2959315 97811 None BOQ321 Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete.upto 50 mm conduit CC floor Mtr 69.0 69.0 90.0 False None None False None False 6210.0 0 2959316 97811 None BOQ322 Supplying And Fixing Metal Fan Box with Round Hook.S HOK M.S.Rod. Nos 117.0 117.0 45.0 False None None False None False 5265.0 0 2959317 97811 None BOQ323 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mSqm (Phase & Neutral) & 1x1.0 mSqm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block.complete for Each outlet.. Short point upto 3m from tapping point to out let via switch box Point 269.0 269.0 75.0 False None None False None False 20175.0 0 2959318 97811 None BOQ324 Medium point above 3m upto 6m from tapping point to out let via switch box Point 379.0 379.0 75.0 False None None False None False 28425.0 0 2959319 97811 None BOQ325 Long point above 6m upto 10m from tapping point to out let via switch box Point 555.0 555.0 55.0 False None None False None False 30525.0 0 2959320 97811 None BOQ326 Two outlet in a row, above 3m upto 6m from tapping point to out let via switches Point 677.0 677.0 65.0 False None None False None False 44005.0 0 2959321 97811 None BOQ327 Three outlet in a row, above 6m upto 10m from tapping point to out let via switches box Point 989.0 989.0 15.0 False None None False None False 14835.0 0 2959322 97811 None BOQ328 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 1.5 mSqm Mtr 26.0 26.0 1110.0 False None None False None False 28860.0 0 2959323 97811 None BOQ329 b.2.5 mSqm Mtr 42.0 42.0 3500.0 False None None False None False 147000.0 0 2959324 97811 None BOQ330 c.4 mSqm Mtr 63.0 63.0 1950.0 False None None False None False 122850.0 0 2959325 97811 None BOQ331 d.6 mSqm Mtr 92.0 92.0 900.0 False None None False None False 82800.0 0 2959326 97811 None BOQ332 e.10 mSqm Mtr 167.0 167.0 250.0 False None None False None False 41750.0 0 2959327 97811 None BOQ333 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 1-2 Way Nos 138.0 138.0 165.0 False None None False None False 22770.0 0 2959328 97811 None BOQ334 b.3 Way Nos 159.0 159.0 45.0 False None None False None False 7155.0 0 2959329 97811 None BOQ335 c.4-5 Way Nos 177.0 177.0 25.0 False None None False None False 4425.0 0 2959330 97811 None BOQ336 d.6 Way Nos 220.0 220.0 45.0 False None None False None False 9900.0 0 2959331 97811 None BOQ337 e.8 Way Nos 261.0 261.0 60.0 False None None False None False 15660.0 0 2959332 97811 None BOQ338 f.10-12 Way Nos 319.0 319.0 15.0 False None None False None False 4785.0 0 2959333 97811 None BOQ339 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos.of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 to 2 Module Nos 137.0 137.0 160.0 False None None False None False 21920.0 0 2959334 97811 None BOQ340 b.3 Module Nos 161.0 161.0 45.0 False None None False None False 7245.0 0 2959335 97811 None BOQ341 c.4 Module Nos 175.0 175.0 30.0 False None None False None False 5250.0 0 2959336 97811 None BOQ342 d.6 Module Nos 234.0 234.0 75.0 False None None False None False 17550.0 0 2959337 97811 None BOQ343 e.8 Module Nos 284.0 284.0 20.0 False None None False None False 5680.0 0 2959338 97811 None BOQ344 f.10-12 Module Nos 344.0 344.0 12.0 False None None False None False 4128.0 0 2959339 97811 None BOQ345 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.. 6A One Way Switch Nos 102.0 102.0 350.0 False None None False None False 35700.0 0 2959340 97811 None BOQ346 b.6A Two Way Switch Nos 166.0 166.0 230.0 False None None False None False 38180.0 0 2959341 97811 None BOQ347 c.6A Three Way socket Nos 171.0 171.0 160.0 False None None False None False 27360.0 0 2959342 97811 None BOQ348 Stepped Fan Regulator Two Module Nos 357.0 357.0 20.0 False None None False None False 7140.0 0 2959343 97811 None BOQ349 b.16A One Way Switch Nos 180.0 180.0 30.0 False None None False None False 5400.0 0 2959344 97811 None BOQ350 c.32A DP Switch Nos 326.0 326.0 10.0 False None None False None False 3260.0 0 2959345 97811 None BOQ351 d.6/16A Universal Socket Nos 236.0 236.0 34.0 False None None False None False 8024.0 0 2959346 97811 None BOQ352 TV/Telephone Socket Nos 156.0 156.0 21.0 False None None False None False 3276.0 0 2959347 97811 None BOQ353 Supplying and fixing regular MCCB distribution Panel confirming to IS/IEC61439-3 and IK09 Tested as per IS/IEC62262 with minimum IP43 protection provided with Polyurethane(PUR)gasket,with suitable earthing system, on wall/wood board/flush mounting using required clA,bolts,nuts,etc.,with provision for fixing of suitable type capacity MCCB's as an incomer for 3phase Doubledoor with necessary bus bar completely wired touseon 440V3 phase4 wire powder coated painting etc.,complete with a provision for fixing of single/three phase suitable capacity MCB's as outgoings confirming to IS/IEC 60898 - 2. 4 WAY Nos 10329.0 10329.0 4.0 False None None False None False 41316.0 0 2959348 97811 None BOQ354 b.8 WAY Nos 12605.0 12605.0 2.0 False None None False None False 25210.0 0 2959349 97811 None BOQ355 c.12 WAY Nos 15529.0 15529.0 2.0 False None None False None False 31058.0 0 2959350 97811 None BOQ356 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. Single door 16 Way SP & N Nos 2932.0 2932.0 2.0 False None None False None False 5864.0 0 2959351 97811 None BOQ357 Double Door 8 Way SP & N Nos 1854.0 1854.0 3.0 False None None False None False 5562.0 0 2959352 97811 None BOQ358 Double Door 12 Way SP & N Nos 2329.0 2329.0 5.0 False None None False None False 11645.0 0 2959353 97811 None BOQ359 Supplying, fixing ,wiring, earth electrode for grounding conduits,I.C.cut out sand other equipment's on the meter board using 40 mm dia2.90 mm thick GI pipe 2.5m long buried in a pit.The pit should be filled with equal proportion of salt and charcoal 150mm all-round the pipe to complete depth.The connection from the pipe to the conduit etc.,is to be established through GI wire of size as per lSI specification 7.3.3.ofI S732 using 12mm dia bolts,nuts,washers and check nutsetc., the pipe shall have 16 through holes of 12 mm diar.(Pg no 54 I-12.56) Nos 3510.0 3510.0 4.0 False None None False None False 14040.0 0 2959354 97811 None BOQ360 Supplying and running of GI / copper strips for grounding connections using necessary fixing materials as required GI Strips - 25 x 3 mm Mtr 82.0 82.0 125.0 False None None False None False 10250.0 0 2959355 97811 None BOQ361 b.8 SWG GI Wire Mtr 22.0 22.0 75.0 False None None False None False 1650.0 0 2959356 97811 None BOQ362 Providing 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 4 core 50 sqmm Km 207194.0 207194.0 0.15 False None None False None False 31079.1 0 2959357 97811 None BOQ363 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff. 2.5 sqmm to 25 sqmm Mtr 20886.0 20886.0 0.25 False None None False None False 5221.5 0 2959358 97811 None BOQ364 b.35 sqmm to 95 sqmm Mtr 31139.0 31139.0 0.15 False None None False None False 4670.85 0 2959359 97811 None BOQ365 Supplying and fixing of heavy duty cable glands suitable for UG cable off 1.1 KV class (metal only). 19/20/25 mm Mtr 75.0 75.0 12.0 False None None False None False 900.0 0 2959360 97811 None BOQ366 b.32 mm Mtr 90.0 90.0 4.0 False None None False None False 360.0 0 2959361 97811 None BOQ367 Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. Nos 1492.0 1492.0 20.0 False None None False None False 29840.0 0 2959362 97811 None BOQ368 Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power input 48 W +/- 10 %, Rated current As per IS:374/79, Rated power factor 0.9 lagging(min), Rated speed 350 +/- 10% RPM, Rated air delivery 210 +/- 10% Cubic Meter Minimum, Rated service value 4.2 CMM / W, Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201, as per IS specification, Motor winding.Temp rise Shall not exceed 75 deg C over and ambient of 40 0C by resistance method at 245 V, Insulation resistance Shall not be less than Two Mega Ohms (2M Ohms), Leakage current Should not exceed 210 Micro Amp, Power input, W& current, Air Delivery & Fan Speed as per IS:374/1979 with latest amendment, 2 year manufacturer Warranty.48" Sweep 5 Star (1200 mm) Nos 2677.0 2677.0 35.0 False None None False None False 93695.0 0 2959363 97811 None BOQ369 Fixing charges of post top/ Gate/ Garden fitting /LED on the existing CI/ GI or any other pipe using required size of reducer, wiring using suitable wires. Nos 198.0 198.0 10.0 False None None False None False 1980.0 0 2959364 97811 None BOQ370 Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clA.On wall/ ceiling / Rafter / Girders Nos 122.0 122.0 270.0 False None None False None False 32940.0 0 2959365 97811 None BOQ371 Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clA and 'S' hook made out of 15mm dia MS rod, with 5 A.ceiling rose of approved quality with necessary length of 23/0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired. Nos 315.0 315.0 35.0 False None None False None False 11025.0 0 2959366 97811 None BOQ372 Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A.ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire. Nos 492.0 492.0 20.0 False None None False None False 9840.0 0 2959367 97811 None BOQ373 Supply of 15 W LED bulk head fitting with guard, Acrylic glass and suitable driverMR Nos 1680.0 1680.0 15.0 False None None False None False 25200.0 0 2959368 97811 None BOQ374 Supplying of.....feet -PVC Batten with integrated LED tube....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80.Power Input: 220-240V@ 50/60Hz & Power factor greater than0.9 along with CE approved.2 years Warranty against any manufacturing defect working under standard electrical condition.. LED light fitting 1 x 2' - 9/10 W Nos 551.0 551.0 10.0 False None None False None False 5510.0 0 2959369 97811 None BOQ375 LED light fitting 1 x 4' - 20/22 W Nos 690.0 690.0 55.0 False None None False None False 37950.0 0 2959370 97811 None BOQ376 Supplying of recess mounting non integrated type LED down light......W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clA, LED of Power/COB with CCT 6500 degree K, CRIgreater than 70%.efficacy greater than100 lumen per W, 120degree beam spread, lifegreater than 25000 burning hours and Compliance to IS10322/IEC 60598, LM 79 & LM 80.The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level.LED's are driven by HF electronic driver integrated in a separate control gear assembly., with PF greater than 0.95, power loss shouldlesser than 5% of lamp Wage, short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79.The operating input voltage should be between 130 to 275 V.BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.. 5-6 W Nos 805.0 805.0 100.0 False None None False None False 80500.0 0 2959371 97811 None BOQ377 Supplying of recess mounting non integral type........LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clA, Power LEDs with CCT 6500 degree K, CRIgreater than 70%.efficacy greater than 100 lumen per W, 120degree beam spread, lifegreater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80.The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF greater than 0.95, power loss shouldlesser than 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79.The operating input voltage should be between 130 to 275 V.BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.. LED modular down light 1'x4' 34-36 W Nos 5898.0 5898.0 25.0 False None None False None False 147450.0 0 2959372 97811 None BOQ378 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees.CCT greater than 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire greater than IK08.Power Factor greater than0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection.Compatible for pole mounting with outer dia of 40mm to 50mm.Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application.Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS.UL approved MCPCB.Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools.LED Light fixture with........W System Power consumption.LED Efficiencygreater than1301m/w, nominal CRI greater than75.Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008.Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part.Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned. LED Streetlight 40W Nos 4024.0 4024.0 2.0 False None None False None False 8048.0 0 2959373 97811 None BOQ379 Supply of LED Bollard light fitting of...W with pressure die cast aluminium housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, CCT greater than 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire greater than IK08.Power Factor greater than0.9 with mains, Surge Protection- Min 5KV along with Over voltage/Overload, short circuit/ miss-wiring protection.Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application.Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS.UL approved MCPCB, with 2 years Warranty against any manufacturing defect working under standard electrical condition. 8W 1 m Height Nos 4528.95 4528.95 5.0 False None None False None False 22644.75 0 2959374 97811 None BOQ380 Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for outdoor luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete.. Single Arm Bracket with 1000 mm Standard 40/50 mm dia Nos 1700.0 1700.0 5.0 False None None False None False 8500.0 0 2959375 97811 None BOQ381 Fabricating supplying and mounting MSbox madeout....SWG suitable for floor/wall mounting, fully weather proof with provision for better heat dissipation,provided with hinged front cover,equipped with tamper proof locking arrangements,with suitable size clamps with necessary cableentry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete.. 14 SWG Sq CM 0.5 0.5 40000.0 False None None False None False 20000.0 0 2959376 97811 None BOQ382 Fabricating supplying and mounting MS box made out...SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enaemeld metal paint etc., complete.. 75x75x6 mm Mtr 555.0 555.0 8.0 False None None False None False 4440.0 0 2959377 97811 None BOQ383 Supplying....amps rated 3 phase with neutral bus bar using requred capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M S flat frame work in existing panel board.The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts 5.40.1 and washers etc., complete.. 100Amps 4x30x6mm Aluminum Strips. Mtr 2465.0 2465.0 12.0 False None None False None False 29580.0 0 2959378 97811 None BOQ384 Supplying of multi function meter digital three line back light LCD type display of voltage, current, current, frequency, power, power factor, KVA , KWH, KVAR.suitable for 3phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication port and class 0.5s accuracy Nos 9315.0 9315.0 4.0 False None None False None False 37260.0 0 2959379 97811 None BOQ385 Supplying, fixing and wiring 50/5 to 400/5A 5VA burden current transformer.Class 0.5 accuracy with tape wound. Nos 562.0 562.0 3.0 False None None False None False 1686.0 0 2959380 97811 None BOQ386 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220V AC, 50Hz 12/24V DC Nos 515.0 515.0 5.0 False None None False None False 2575.0 0 2959381 97811 None BOQ387 Supplying fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50Hz AC with latest mnicrocontroller based, digital read out of percentage leakage current, programmable delay/auto/manual reset facility suitable to mount on DIN rail/flush mounting panel board Nos 9255.0 9255.0 2.0 False None None False None False 18510.0 0 2959382 97811 None BOQ388 Supply and fixing Moulded case circuit breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete.Protection of overload and short circuit with thermal magnetic/micro processor releases and earth fault as per IS - 13947 Four pole. 100Amps 25kA Nos 8487.0 8487.0 1.0 False None None False None False 8487.0 0 2959383 97811 None BOQ389 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60899. 6-32 Amps SP Nos 415.0 415.0 3.0 False None None False None False 1245.0 0 2959384 97811 None BOQ390 b.6-32 Amps DP Nos 739.0 739.0 5.0 False None None False None False 3695.0 0 2959385 97811 None BOQ391 c.6-32 Amps TPN Nos 1717.0 1717.0 4.0 False None None False None False 6868.0 0 2959386 97811 None BOQ392 d.40 Amps TPN Nos 3044.0 3044.0 4.0 False None None False None False 12176.0 0 2959387 97811 None BOQ393 Supplying, erecting, testing & commissioning of OFF- LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with all accessories complete and Excluding batteries and wiring complete.. 3 kVA OFF LINE UPSVol 6 Pg.Nos38 S.Nos9.2.4 Nos 29142.0 29142.0 1.0 False None None False None False 29142.0 0 2959388 97811 None BOQ394 Supplying, installation, testing and commissioning of 12 volts DC AH batteries in poly propylene container for UPS sealed maintainence free batteries. 12V, 75 - 80 AH capacity.Acoid battery Nos 10172.0 10172.0 3.0 False None None False None False 30516.0 0 2959389 97811 None BOQ395 Design, supplying, erecting testing and commissioning of-Passenger/Bed-cum-passenger hospital lift with speed of 1mtr per second, variable voltage variable frequency drive, with or with out machine roomf or the available wellsize,operating at 415 V3 phase 50 cycles AC supply, powder coated/Stainless Steel carentrance door sen closures with suitable colourvinyl flooring, LED carillumination, emergency light, intercomand fan as desired by the user, central opening/side opening door with or without attend antoperation, 7segment display buttons, call register indicator, firemandrive, SShandrails insidecar, fulllength infrared curtain in car door, automatic rescue device with batteries, voice announcing in regional/international languages, Braille buttons with one year warranty and maintenance with necessary scaffolding and minor civil works like fixing of guiderail, counterweight etc., The total product and services shall adhere to IS14665/2016 (with latest amendments part/section 1 to 5 with regards togeneral guidelines offire safety rated doors, MRLL beams, pressures witch, manual change over for doors during emergency, ARD of 10times with sufficient battery backup and standard dimensions of chair car and door openings for all sizes and capacities of lifts including fitness certificate and duly observing all other safety norms prescribed and adhere to CPWD specifications, PCBNorms, National Electricity Code(NEC), NBC-2016,IEC and Karnataka State Lifts, Escalators and Passengers Conveyers Act 2012 and Rules 2014.The Supplier shall be registered in Government Electrical Inspectorate in the State of Karnataka.With Out Machine Room-SS Finish 8 passengers 3 stops Nos 1529002.14 1529002.14 1.0 False None None False None False 1529002.14 0 2959390 97811 None BOQ396 Supplying & Laying cable trays including welding, fixing of supports Cable tray of 600 mm width (suitable for cable ducts of A, B & C type) Mtr 1064.0 1064.0 65.0 False None None False None False 69160.0 0 2959391 97811 None BOQ397 Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293.GROUP A a) TV/ Telephone socket Each 156.0 156.0 45.0 False None None False None False 7020.0 0 2959392 97811 None BOQ398 b) RJ45/I.O.outlet Each 337.0 337.0 60.0 False None None False None False 20220.0 0 2959393 97811 None BOQ399 Supplying and drawing UTP-CAT 6E LAN cable. Mtr 38.0 38.0 2000.0 False None None False None False 76000.0 0 2959394 97811 None BOQ400 Supplying and Drawing PVC flexible one pair telephone unarmoured tinned copper cable.a) 2 Pair Mtr 21.0 21.0 750.0 False None None False None False 15750.0 0 2959395 97811 None BOQ401 Supplying and fixing of switch mounting rack with power manager & cable manager.6U with 450mm depth Each 6977.0 6977.0 2.0 False None None False None False 13954.0 0 2959396 97811 None BOQ402 Supplying and fixing of power strip. Each 1457.0 1457.0 2.0 False None None False None False 2914.0 0 2959397 97811 None BOQ403 Supplying and fixing of fan. Each 1209.0 1209.0 2.0 False None None False None False 2418.0 0 2959398 97811 None BOQ404 Supplying & fixing of ….mtrs Cat6 Patch Cable a) 1 mtr Each 224.0 224.0 60.0 False None None False None False 13440.0 0 2959399 97811 None BOQ405 Supplying & fixing of ….mtrs Cat6 Patch Cable b) 2 mtr Each 257.0 257.0 60.0 False None None False None False 15420.0 0 2959400 97811 None BOQ406 Supplying & fixing of Patch Panel for LAN cabling.24 Port 10/100/1000 Patch Panel Each 4100.0 4100.0 3.0 False 0.0 0.0 False None False 12300.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1709806923000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1709806923000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1709806923000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1709806960000 0 None None ELIGIBILITY All other terms and conditions as per NIT and KW4 None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx) None None None None None None Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period) None None None None None None Total value of civl engineering works executed and payments received in the last five years (year-wise) None None None None None None List of existing commitments and ongoing works None None None None None None List of works for which tenders already submitted None None None None None None Banker Details for reference None None None None None None Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded None None None None None None Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years None None None None None None Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded None None None None None None List of Financial Resources with Certificates None None None None None None The bidders shall upload the work done certificate for having executed One building work of value not less than Rs. 226.5O.00 lakhs and completed satisfactorily as a prime contractor within stipulated time period in the past 5 years (i.e., 2018-19 to 2022-23). Work done certificate shall be duly signed by the officer not below the rank of Executive Engineer or equivalent.(Note: Work done amount will be updated to the FY 2023-24 in which the tenders are invited. The value of the completed works will be given a weight of 10% per year to bring them to the price level of the FY 2023-24 in which the tenders are invited) Past Experience None createdTs version createdDate modifiedDate documentName None None None None Others -- workdone certificate as per NIT and KW4 None None None None The bidders shall upload the work done certificate for minimum quantities of work executed in any one year, following quantities (In a continuous period of 12 months from April to March) in the last 5 years (i.e. F/Y 2018-19 to F/Y 2022-23) the certificate shall be issued by the officer not below the rank of Executive Engineer or equivalent. a.PCC/RCC 440.00 Cum b.Burnt brick masonry/Solid block 268.00Cum / 1340.00 Sqm c.TMT steel reinforcement 44.00 Tonnes d.Vitrified / Ceramic / Granite flooring 2200.00 Sqm Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Minimum Quantities Certificate as per NIT and KW4 None None None None The bidders shall upload a valid registered KPWD Civil contractor Licence of Class II and above. Capabilities of Vendor KPWD Registration Certificate as per NIT and KW4 createdTs version createdDate modifiedDate documentName None None None None PWD Registration Certificate (Class I/II/III/IV) None None None None The bidders shall achieved turnover for an amount not less than Rs.906.00 lakhs achieved in any two financial years in the past 5 years (i.e.2018-19 to 2022-23) (in all classes of civil engineering construction works only). The Turnover certificate along with Balance sheet and P & L statement of past 5 years for the Civil Engineering works only (i.e.2018-19 to 2022-23) issued from a Registered Chartered Accountant (Registered Chartered Accountant PIN must be mentioned) should be uploaded. (Note: The turnover amount will be updated to the FY 2022-23 in which the tenders are invited. The Financial turnover of previous years will be given a weightage of 10% per year to bring them to the price level of the FY 2022-23 in which the tenders are invited) Financial Status None createdTs version createdDate modifiedDate documentName None None None None Others -- Annual Turnover Certificate Along with P&L statements of past 5 years as per NIT and KW4 None None None None The bidder/tenderer or his identified Sub contractor should upload required valid electrical licence along with consent / undertaking letter for executing building electrification works and should have executed similar electrical works totalling for Rs.17.70 lakhs in any one year in the last 5 years, (i.e. 2018-19 to 2022-23) signed by the officer not below the rank of Executive Engineer or equivalent for Electrical works. Others Electrical licence, consent letter and Electrical workdone as per NIT and KW4 createdTs version createdDate modifiedDate documentName None None None None Others -- Electrical licence, consent letter and Electrical workdone as per NIT and KW4 None None None None The bidder/tenderer or his identified Sub contractor should upload required valid PHE licence along with consent / undertaking letter for executing Water supply / Sanitary engineering works and should have executed similar Water supply / sanitary engineering works /PHE works totalling for Rs.7.70 lakhs in any one year in the last 5 years,(i.e. 2018-19 to 2022-23),signed by the officer not below the rank of Executive Engineer or equivalent for Water supply / sanitary engineering works /PHE works. Others Water supply licence, consent letter and Water supply workdone as per NIT and KW4 createdTs version createdDate modifiedDate documentName None None None None Others -- Water supply licence, consent letter and Water supply workdone as per NIT and KW4 None None None None The banker certificate as per the enclosed format shall be uploaded for availability of fund requirement for the work not less Rs.136.00 Lakhs issued by Nationalised or Scheduled Bank after this notification date, with following details.1. Cash at Bank 2.Term deposits 3.Credit facility sanctioned a. Credit Utilized b. Balance credit facility available Others Banker certificate As per Enclosed format as per NIT and KW4 createdTs version createdDate modifiedDate documentName None None None None Others -- Banker certificate As per Enclosed format as per NIT and KW4 None None None None Bidder shall upload the self-declaration affidavit as per the enclosed format on the stamp paper of value not less than Rs. 100/- duly notarized stating that a.Not made any misleading or false representations in the forms, statements and attachments submitted in proof of the qualification requirements.b. Not made any Record of poor performance such as abandoning the works, not properly completing the contract, inordinate delays in completion or financial failures etc. c.Not participated in the previous Tender for the same work and had quoted unreasonably high tender prices and could not furnish rational justification. d.No Litigation History or arbitration arising out of contracts completed or under execution by it over the preceding five years Others self-declaration affidavit as per the enclosed format on the stamp paper as per NIT and KW4 createdTs version createdDate modifiedDate documentName None None None None Others -- self-declaration affidavit as per the enclosed format on the stamp paper as per NIT and KW4 None None None None All other terms and conditions as per NIT and KW4 Others All other terms and conditions as per NIT and KW4 createdTs version createdDate modifiedDate documentName None None None None Others -- All other terms and conditions as per NIT and KW4
tenderCriterionDocumentList	documentName optional documentTypeText KPWD Registration Certificate as per NIT and KW4 True Technical Bid Annual Turnover Certificate Along with P&L statements of past 5 years as per NIT and KW4 True Technical Bid workdone certificate as per NIT and KW4 True Technical Bid Minimum Quantities Certificate as per NIT and KW4 True Technical Bid Electrical licence, consent letter and Electrical workdone as per NIT and KW4 True Technical Bid Water supply licence, consent letter and Water supply workdone as per NIT and KW4 True Technical Bid Banker certificate As per Enclosed format as per NIT and KW4 True Technical Bid Bid Capacity as per NIT and KW4 True Technical Bid self-declaration affidavit as per the enclosed format on the stamp paper as per NIT and KW4 True Technical Bid
tenderWorkLocationList
tenderAddress	createdTs 1709829411000 version 0 createdDate None modifiedDate None blockNumber First floor, Belaku Bhavana, BESCOM Corporate office, K R Circle, Bengaluru street None city Bengaluru state Karnataka pin 560001
tenderRecallDTO	None