createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1709817543287 version 7 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 5000.00 emd 598000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 18-03-2024 16:30:00 tenderQueryClose 13-03-2024 11:00:59 technicalBidOpen 19-03-2024 16:30:05 publishedDate 11-03-2024 11:15:48 publishedByPost CNNL_EE_DIV_HRBC2_HNS publishedByUser KPE11717 - MANJUNATH BASAVEGOWDA bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate 12-03-2024 11:00:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Executive Engineer splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber None mobileNumber 9845300076 tenderSupplierList None
tenderSchedule	createdTs 1709817543313 version 4 createdDate None modifiedDate None tenderNumber CNNL/2023-24/IW/WORK_INDENT882 title Widening of tank bund and construction of causeway to waste weir halla, repairs to waste weir and construction of box drain to sluice canal of melur tank under HRBC description Widening of tank bund and construction of causeway to waste weir halla, repairs to waste weir and construction of box drain to sluice canal of melur tank under HRBC category WORKS categoryText Works ecv 39842112.37 deptName Cauvery Neeravari Nigam Limited status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 5707 locationName CNNL No 2 HRBC Div Hunsur provisionalAmount 40000000.0 groupOverheadTotal 6077610.36 fileNumber CERno427/2023-24kittur
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1709817543000 0 None None Irrigation and Other Works Widening of tank bund and construction of causeway to waste weir halla, repairs to waste weir and construction of box drain to sluice canal of melur tank under HRBC 33764502.01 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2966966 98123 None 001 Cutting and removing jauliflora bushes upto 1.50 m girth excluding removal of stumps and including burning or disposing off the materials as directed with all other ancillary operations complete etc complete as per the direction of Engineer In-charge Each 26.78 26.78 50.0 False None None False None False 1339.0 0 2966967 98123 None 002 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work etc complete as per the direction of Engineer In-charge Cum 254.1 254.1 21.6 False None None False None False 5488.56 0 2966968 98123 None 003 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m etc complete as per the direction of Engineer In-charge Cum 107.1 107.1 3314.3 False None None False None False 354961.53 0 2966969 98123 None 004 Supplying, filling, spreading & leveling stone boulders of size range 5 cmto 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. Cum 1052.1 1052.1 121.92 False None None False None False 128272.032 0 2966970 98123 None 005 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates etc complete as per the direction of Engineer In-charge Cum 6288.45 6288.45 69.98 False None None False None False 440065.731 0 2966971 98123 None 006 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates etc complete as per the direction of Engineer In-charge Cum 8622.18 8622.18 102.67 False None None False None False 885239.2206 0 2966972 98123 None 007 Providing and laying insitu vibrated M-15grade cement concrete using 40 mm down approved, clean, hard, graded aggregates with placing and sinking plums of size 150 to 80 mm upto 15 percent for piers/ gravity type retaining walls / abutments / other similar structures including cost of all materials, machinery, labour, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing with all other ancillary operations complete etc complete as per the direction of Engineer In-charge Cum 7321.55 7321.55 191.4 False None None False None False 1401344.67 0 2966973 98123 None 008 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators,providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates etc complete as per the direction of Engineer In-charge Cum 7396.62 7396.62 46.7 False None None False None False 345422.154 0 2966974 98123 None 009 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarseaggregates (Additionalities for Formwork, Centering & Scaffolding 35% added to basic Rate for Cement Conerete Drain) etc complete as per the direction of Engineer In-charge Cum 8962.85 8962.85 39.0 False None None False None False 349551.15 0 2966975 98123 None 010 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification etc complete as per the direction of Engineer In-charge t 94510.5 94510.5 15.0 False None None False None False 1417657.5 0 2966976 98123 None 011 Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness etc complete as per the direction of Engineer In-charge 100 Sqm 412.65 412.65 56.1 False None None False None False 23149.665 0 2966977 98123 None 012 Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction etc complete as per the direction of Engineer In-charge Cum 110.25 110.25 660.0 False None None False None False 72765.0 0 2966978 98123 None 013 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site,spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work etc complete as per the direction of Engineer In-charge Cum 497.7 497.7 500.0 False None None False None False 248850.0 0 2966979 98123 None 014 Providing new embankment abutting to existing bund to strength the existing bund using soil from approved borrow area in layers of 200 to 250 mm and compacting each layer to density control of not less than 95 percent by vibrating plate compactor or pnuematic tamper including cost of all materials, machinary, labour, picking previous layer , spreading soil in layer, breaking clods, watering etc.,complete with initial lead upto 1km and all lifts etc complete as per the direction of Engineer In-charge Cum 476.7 476.7 33288.5 False None None False None False 15868627.95 0 2966980 98123 None 015 Providing and constructing 450 mm thick hand packed rough stone revetment consisting of 300 mm thick rough stones with 400 to 450 mm long through stones at 1.5 m c / c over a backing of 150 mm thick 40 mm down graded coarse aggregate layer including cost of all materials machinery, labour, laying to specified slope, wedging with chips, finishing & all necessary works as directed and complete as per specification etc complete as per the direction of Engineer In-charge Sqm 771.75 771.75 750.0 False None None False None False 578812.5 0 2966981 98123 None 016 Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front end loader at OMC and compacting with vibratory roller to achieve the desired density, complete as per clause 401 etc complete as per the direction of Engineer In-charge Cum 2553.6 2553.6 430.0 False None None False None False 1098048.0 0 2966982 98123 None 017 Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density etc complete as per the direction of Engineer In-charge Cum 2686.95 2686.95 618.75 False None None False None False 1662550.3125 0 2966983 98123 None 018 Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/m2using mechanical means etc complete as per the direction of Engineer In-charge Sqm 43.05 43.05 4125.0 False None None False None False 177581.25 0 2966984 98123 None 019 Providing and laying Bituminous Macadam with 40/60 tphcapacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 3.3% by weight of mix, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction etc complete as per the direction of Engineer In-charge Cum 7835.1 7835.1 206.25 False None None False None False 1615989.375 0 2966985 98123 None 020 Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2on the prepared bituminous surface cleaned with mechanical broom etc complete as per the direction of Engineer In-charge Sqm 12.6 12.6 4125.0 False None None False None False 51975.0 0 2966986 98123 None 021 Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 5% by weight of mix and filler, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per MoRTH V revision etc complete as per the direction of Engineer In-charge Cum 10659.6 10659.6 103.13 False None None False None False 1099324.548 0 2966987 98123 None 022 Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope andcompacted to meet requirement of table No. 300-2 etc complete as per the direction of Engineer In-charge Cum 517.65 517.65 210.8 False None None False None False 109120.62 0 2966988 98123 None 023 Providing and erecting a "W" metal beam crash barrier system comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 811 etc complete as per the direction of Engineer In-charge m 3822.0 3822.0 1200.0 False None None False None False 4586400.0 0 2966989 98123 None 024 Providing and laying Hariyala or other approved quality turfing sods for the slopes of earthen embankments over 20 mm thick sand backing including cost of all materials, machinery,labour including preparing surface, spreading sand including tamping, watering for 15 days & all necessary works as directed and complete as per specification etc complete as per the direction of Engineer In-charge Sqm 160.65 160.65 4200.0 False None None False None False 674730.0 0 2966990 98123 None 025 Providing and constructing 450 mm thick hand packed rough stone revetment consisting of 300 mm thick rough stones with 400 to 450 mm long through stones at 1.5 m c / c over a backing of 150 mm thick 40 mm down graded coarse aggregate layer including cost of all materials machinery, labour, laying to specified slope, wedging with chips, finishing & all necessary works as directed and complete as per specification etc complete as per the direction of Engineer In-charge Sqm 771.75 771.75 735.0 False None None False None False 567236.25 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1709817544000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1709817544000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1709817544000 1 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1709817653000 0 None None ELIGIBILITY EMD and Tender processing fee shall be paid through e-Payment using the following four modes of Payment a) Credit card payment b) Direct debit payment c) National electronic fund transfer d) Over the Counter (OTC) e) e-Bank Guarantee None 1709817660000 0 None None ELIGIBILITY Sub-leasing/G.P.A. of work is prohibited None 1709817670000 0 None None ELIGIBILITY The intending bidder should furnish the certificate of registration in KPWD/CPWD Class-II & above None 1709817678000 0 None None ELIGIBILITY The Bidder shall ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date of bid submission None 1709817686000 0 None None ELIGIBILITY The tenderer is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches None 1709817694000 0 None None ELIGIBILITY Conditional tenders will be rejected None 1709817702000 0 None None ELIGIBILITY The tenderer shall bear all costs associated with the preparation and submission of his tender and the employer will in no case be responsible and liable for those costs None 1709817710000 0 None None ELIGIBILITY The tender processing fee will neither be refunded nor will be transferred to other works None 1709817717000 0 None None ELIGIBILITY The CNNL reserves the right of rejecting any or all of the tenders without assigning any reason and will not be bound to accept the lowest tender None 1709817724000 0 None None ELIGIBILITY Royalty on construction materials and other taxes will be deducted as per prevailing Government orders None 1709817732000 0 None None ELIGIBILITY Amount put to tender includes cost of cement, Steel and other materials and labour charges. The rates quoted must also be inclusive of Sales Tax, Excise Duty Royalty Octroi Quarry fee etc No extra payment on this account will be entertained None 1709817739000 0 None None ELIGIBILITY Contractor has to make his own arrangement for procurement of all materials required for the work There is no departmental supply of materials Contractor should procure only ISI mark materials and submit necessary quality control certificates from the authorised quality control authority, before execution None 1709817746000 0 None None ELIGIBILITY One percent (1%) of the bill amount of the successful tenderer will be deducted towards the construction labour welfare fund as per Government Order LD/300/LET/2006 Bangalore dated 01-01-2007 and Government letter No. PW / 134 / BMS / 2007 dated 27-07-2007 None 1709817764000 0 None None ELIGIBILITY The work includes all lead and lift and work shall be carried out as per the instructions of the Engineer-in-Charge of the work. The rates in the schedule-B include all lead and lift irrespective of distance and height. No extra charges will be paid for additional lead and lift None 1709817771000 0 None None ELIGIBILITY The validity period for EMD shall be minimum valid for 45 days beyond the validity period of tender None 1709817777000 0 None None ELIGIBILITY Any necessary documents can be uploaded in spaces provided for general documents in upload document section None 1709817785000 0 None None ELIGIBILITY The Defects Liability Period for this work is 3 years from the date of completion of work None 1709817794000 0 None None ELIGIBILITY If the rates quoted by tenderer for any items of work is/are below the estimated rates of the department then the contractor shall furnish an additional performance security in the form of Bank Guarantee for an amount equivalent to the difference between the cost as per quoted rate and the estimated rates. In case of contractor quoting rate above 125% of the estimated rates, then the amount over and above 125% will be withheld during the progress of work None 1709817801000 0 None None ELIGIBILITY No quarries are approved by CNNL for materials None 1709817808000 0 None None ELIGIBILITY Contractors should have to upload the scanned copy of all necessary qualification documents and submit the original documents/certificate duly attested by notary for verification during the tender evaluation None 1709817815000 0 None None ELIGIBILITY Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder None 1709817823000 0 None None ELIGIBILITY GST will be paid to the contract amount separately. Increase in GST shall not be paid in extended period of contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension None 1709817830000 0 None None ELIGIBILITY If Nigama wishes to engage third party inspecting agency for the said work, apart from the Quality Control authorities and field tests of the Nigama and Contractor, then the contractor should co-operate with the third party test and Quality Control authorities None 1709817837000 0 None None ELIGIBILITY All scanned documents to be uploaded shall be in original and the Executive Engineer reserves the right to verify the documents before approvalFurther details and information, if any, required can be had from the Office of the Executive Engineer, No.2 HRBC Division Hunsur on all working days during office hours. If any of the dates mentioned above happens to be a General Holiday, the next working day will hold good in lieu of the date mentioned None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx) None None None None None None Total value of civl engineering works executed and payments received in the last five years (year-wise) None None None None None None List of existing commitments and ongoing works None None None None None None List of works for which tenders already submitted None None None None None None Banker Details for reference None None None None None None Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years None None None None None None List of Financial Resources with Certificates None None None None None None The intending bidder / firm / company should have satisfactorily completed (at least 90% of the contract value) as prime contractor, at least one similar work such as Improvements/Construction of Tank Bund and CD works of value not less than Rs.199 Lakhs Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None The intending bidder/firm/company should have satisfactorily completed following quantity of work in any one of the years (for a continuous period of 12 months) in last five financial years 1) Earth Work Excavation/ Embankment-29700 Cum 2) In-situ Concrete-360.00 Cum 3) Reinforcement Steel-12.00 tonnes 4)Granular sub base/WMM/WBM-839.00 cum 5)crash barrier-960 m Note: Certificate in this regard from an officer not below the rank of the Executive Engineer to be enclosed Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None The intending bidder/firm/company should furnish details of ownership/lease certificates of the following minimum requirement of machineries for the works 1) Excavator-2nos 2) Concrete Mixer-2nos 3) Tipper-2nos 4) Vibratory Roller-2nos 5) Tanker-2nos Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Required Constrcution Equipmets None None None None List of key technical personnel required for the above work is as under Sl No. Category Qualification and Experience No. of persons to be deployed 1) Civil Engineer BE (Civil) with Min.2 Year Experience-1no 2) Civil Engineer Diploma (Civil) with Min.2 Year Experience -1no Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Technical Key Personnels None None None None Tenderers who meet the above specified minimum qualifying criteria will only be qualified if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under Assessed available tender capacity (AxNx2.5-B) where A- Maximum value of civil engineering works executed in any one year during the last five years (updated to 2023-24 price level) taking into account the completed as well as works in progress N- Number of years prescribed for completion of the works for which tenders are invited B- Value, at 2023-24 price level, of existing commitments and on-going works to be completed during the next 180 days Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Bid Capacity None None None None The intending bidder / firm / company should have achieved in at least two financial years in the last five years i.e. 2018-19 to 2022-23 an average annual financial turnover (in all classes of civil engineering construction works only) of Rs.797.00 Lakhs NOTE: Turnover certificate duly audited by Chartered accountant should be Uploaded Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None The intending bidder/firm/company shall furnish details of liquid assets and or availability of credit facilities of not less the amount Rs.120.00 Lakhs for meeting the required funds in the form of credit lines / line of credit / certificate from Nationalized / Scheduled Bank Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit
tenderCriterionDocumentList	documentName optional documentTypeText KPWD/CPWD Class-II and above Registration Certificate True Technical Bid Annual Financial Turnover Certificate and Audited financial statements duly certified by Chartered Accountants 2018-19 to 2022-23 True Technical Bid Existing commitments and on-going works 2018-19 to 2022-23 True Technical Bid Assessed available tender capacity 2018-19 to 2022-23 True Technical Bid Similar Work Done Certificate True Technical Bid Line of credit/certificates from scheduled Nationalized banks True Technical Bid Details of ownership, lease/hire certificates of machines True Technical Bid Details of Key personnels True Technical Bid The intending bidder should furnish the communication address and contact mobile number True Technical Bid
tenderWorkLocationList
tenderAddress	createdTs 1709987876000 version 0 createdDate None modifiedDate None blockNumber Office of the Chief Engineer Irrigation south CNNL Mysore street None city Mysore state Karnataka pin 570004
tenderRecallDTO	None