createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1710159506476 version 3 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 5000.00 emd 483000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 18-04-2024 16:00:00 tenderQueryClose 17-04-2024 17:30:00 technicalBidOpen 19-04-2024 16:30:00 publishedDate 12-03-2024 16:00:38 publishedByPost PWD_EE_DIV_KLR publishedByUser KPE15402 - RAMAMURTHY K L bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate 15-04-2024 11:00:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Rama Murthy KL splitEmdRequiredYn True emdBankGuarantee 383000.00 emdCash 100000.00 bgValidityPeriod 135 hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08152222022 mobileNumber 9901202424 tenderSupplierList None
tenderSchedule	createdTs 1710159506525 version 7 createdDate None modifiedDate None tenderNumber PWD/2023-24/BD/WORK_INDENT10116 title Construction of New District Training and Extension Center Building at Kolar description Construction of New District Training and Extension Center Building at Kolar category WORKS categoryText Works ecv 32210337.13 deptName Public Works Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 1672 locationName PWD Division Office Kolar provisionalAmount 34000000.0 groupOverheadTotal 0.0 fileNumber AEE/PWD/KLR/DTEC/KOLAR/8443-DEPOSITCONTRIBUTION/2023-24
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1710159507000 1 None None Buildings PART A- CIVIL WORK 27618375.57 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2990297 99331 None PWD CSR Vol-1 Pg No 8 No 1.12 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work In all kinds of soils upto 300 mm depth. (PWD CSR Vol-1 Pg No: 8 No: 1.12) ---- Complete with all lead Cum 112.1 112.1 169.26 False None None False None False 18974.046 0 2990298 99331 None Item No 1.14.1, P No 8 V.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work ( Item No: 1.14.1, P No: 8 V-1) ---- Complete with all lead Cum 120.36 120.36 1135.36 False None None False None False 136651.9296 0 2990299 99331 None Item No 1.9 P No.7, V.1. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m (Item No: 1.9 P No-7, V-1.) ---- Complete with all lead Cum 313.88 313.88 1107.91 False None None False None False 347750.7908 0 2990300 99331 None Item No 4.1, P No 5 V-2 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 ltr/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications ( Item No: 4.1 , P No: 5 V-2) ---- Complete with all lead Sqm 139.24 139.24 964.29 False None None False None False 134267.7396 0 2990301 99331 None Item No 2.1.3, P No 15 V-1 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates( Item No: 2.1.3, P No: 15 V-1) ---- Complete with all lead Cum 7067.02 7067.02 118.96 False None None False None False 840692.6992 0 2990302 99331 None Item No 2.2.1, P No 15 V-1 Providing and laying in position Cement Concrete for all Foundation works.The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. 2.2.1 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates( Item No: 2.2.1, P No: 15 V-1) ---- Complete with all lead Cum 7418.66 7418.66 12.2 False None None False None False 90507.652 0 2990303 99331 None Item No 2.2.1, P No 15 V-1 Providing and laying in position Cement Concrete for all Foundation works.The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. 2.2.1 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ( Item No: 2.2.1, P No: 15 V-1) ---- Complete with all lead Cum 7418.66 7418.66 1.29 False None None False None False 9570.0714 0 2990304 99331 None Item No 2.3.2 P P no 16 V-1 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates( Item No: 2.3.2 P P no: 16 V-1) ---- Complete with all lead Cum 8258.11 8258.11 360.44 False None None False None False 2976553.1684 0 2990305 99331 None Item No 2.3.2 P P no 16 V-1 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates( Item No: 2.3.2 P P no: 16 V-1) ---- Complete with all lead Cum 11469.6 11469.6 23.52 False None None False None False 269764.992 0 2990306 99331 None Item No 2.5.2 P P no 16 V-1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates( Item No: 2.5.2 P P no: 16 V-1) ---- Complete with all lead Cum 13727.06 13727.06 27.44 False None None False None False 376670.5264 0 2990307 99331 None Item No 2.5.2 P P no 16 V-1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates( Item No: 2.5.2 P P no: 16 V-1) ---- Complete with all lead Cum 12919.58 12919.58 44.54 False None None False None False 575438.0932 0 2990308 99331 None Item No 2.5.2 P P no 16 V-1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates( Item No: 2.5.2 P P no: 16 V-1) ---- Complete with all lead Cum 12112.11 12112.11 104.71 False None None False None False 1268259.0381 0 2990309 99331 None Item No 2.5.2 P P no 16 V-1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates( Item No: 2.5.2 P P no: 16 V-1) ---- Complete with all lead Cum 12112.11 12112.11 6.64 False None None False None False 80424.4104 0 2990310 99331 None Item No 2.5.2 P P no 16 V-1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates( Item No: 2.5.2 P P no: 16 V-1) ---- Complete with all lead Cum 13432.78 13432.78 25.95 False None None False None False 348580.641 0 2990311 99331 None Item No 2.5.2 P P no 16 V-1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates( Item No: 2.5.2 P P no: 16 V-1) ---- Complete with all lead Cum 12919.58 12919.58 42.21 False None None False None False 545335.4718 0 2990312 99331 None Item No 2.5.2 P P no 16 V-1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ( Item No: 2.5.2 P P no: 16 V-1) ---- Complete with all lead Cum 12112.11 12112.11 100.7 False None None False None False 1219689.477 0 2990313 99331 None Item No 2.5.2 P P no 16 V-1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates( Item No: 2.5.2 P P no: 16 V-1) ---- Complete with all lead Cum 11735.1 11735.1 6.64 False None None False None False 77921.064 0 2990314 99331 None Item No 2.5.2 P P no 16 V-1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates( Item No: 2.5.2 P P no: 16 V-1) ---- Complete with all lead Cum 13299.78 13299.78 3.97 False None None False None False 52800.1266 0 2990315 99331 None Item No 2.5.2 P P no 16 V-1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates( Item No: 2.5.2 P P no: 16 V-1) ---- Complete with all lead Cum 13299.78 13299.78 5.26 False None None False None False 69956.8428 0 2990316 99331 None Item no 2.5.1 P no 16 V-1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates: (item no 2.5.1 P no: 16 V-1 -) ---- Complete with all lead Sqm 11343.93 11343.93 2.3 False None None False None False 26091.039 0 2990317 99331 None Item no 2.5.1 P no 16 V-1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates: (item no 2.5.1 P no: 16 V-1 -) ---- Complete with all lead Sqm 11343.93 11343.93 2.51 False None None False None False 28473.2643 0 2990318 99331 None Item No 2.11a, P No 18, V-1 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, lapping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. a. Buildings) Item No: 2.11a, P No: 18, V-1 ---- Complete with all lead Tonne 105559.26 105559.26 69.97 False None None False None False 7385981.4222 0 2990319 99331 None Item no.2.3.1.page no 16,V-1 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (item no-2.3.1.page no 16,V-1) ---- Complete with all lead Cum 7461.14 7461.14 18.4 False None None False None False 137284.976 0 2990320 99331 None item no-2.3.1.page no 16,V-1 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (item no-2.3.1.page no 16,V-1) ---- Complete with all lead Cum 7461.14 7461.14 18.4 False None None False None False 137284.976 0 2990321 99331 None Item no 6.32 pg no-17 V-2 SOLID BLOCK MASONRY Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.(item no 6.32 pg no-17 V-2) ---- Complete with all lead Sqm 1545.8 1545.8 619.73 False None None False None False 957978.634 0 2990322 99331 None Item no 6.32 pg no-17 V-2 SOLID BLOCK MASONRY Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Item no 6.32 pg no-17 V-2 ---- Complete with all lead Sqm 1545.8 1545.8 859.99 False None None False None False 1329372.542 0 2990323 99331 None Item No 6.13,, P No: 14, V-2 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.( Item No: 6.13,, P No: 14, V-2) ---- Complete with all lead Sqm 1151.68 1151.68 21.84 False None None False None False 25152.6912 0 2990324 99331 None Item No 6.13,, P No: 14, V-2 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.( Item No: 6.13,, P No: 14, V-2) ---- Complete with all lead Sqm 1151.68 1151.68 15.84 False None None False None False 18242.6112 0 2990325 99331 None Item No 11.1 P No: 77 V-2 Providing and fixing Structural Steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.. (Item No: 11.1 P No: 77 V-2) ---- Complete with all lead Kgs 125.08 125.08 1341.0 False None None False None False 167732.28 0 2990326 99331 None Item No 11.1 P No: 77 V-2 Providing and fixing Structural Steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (Item No: 11.1 P No: 77 V-2) ---- Complete with all lead Kgs 125.08 125.08 1487.25 False None None False None False 186025.23 0 2990327 99331 None Item No 12.75.1 P No: 107 V-2 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type ) ( Item No: 12.75.1 P No: 107 V-2) ---- Complete with all lead Nos 324.5 324.5 174.0 False None None False None False 56463.0 0 2990328 99331 None Item No 12.76.2 P No 107 V-2 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete200x10mm : ( Item No: 12.76.2 P No: 107 V-2) ---- Complete with all lead Nos 413.0 413.0 116.0 False None None False None False 47908.0 0 2990329 99331 None Item No 12.58, P No 105 V-2 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. ( Item No: 12.58, P No: 105 V-2) ---- Complete with all lead Nos 141.6 141.6 38.0 False None None False None False 5380.8 0 2990330 99331 None Item No 11.28 P No 85 V-2 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ( Item No: 11.28 P No: 85 V-2) ---- Complete with all lead Sqm 666.7 666.7 440.93 False None None False None False 293968.031 0 2990331 99331 None Item No 11.28 P No 85 V-2 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (Item No: 11.28 P No: 85 V-2) ---- Complete with all lead Sqm 666.7 666.7 194.04 False None None False None False 129366.468 0 2990332 99331 None Item No 12.13.1 P No 100 V-2 Providing Salwood frames of doors, windows, clerestory windows,ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. Item No: 12.13.1 P No: 100 V-2 ---- Complete with all lead Cum 116601.7 116601.7 1.13 False None None False None False 131759.921 0 2990333 99331 None Item No 12.13.1 P No 100 V-2 Providing Salwood frames of doors, windows, clerestory windows,ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. Item No: 12.13.1 P No: 100 V-2 ---- Complete with all lead Cum 116601.7 116601.7 0.84 False None None False None False 97945.428 0 2990334 99331 None Item No 22.15.4 P No 219 V-2 SS Aldrop 16mm dia, 300mm (Item No: 22.15.4 P No: 219 V-2) ---- Complete with all lead Nos 442.5 442.5 29.0 False None None False None False 12832.5 0 2990335 99331 None Item No 12.55.1P No 104 V-2 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges. -do- with both side prelam ( Item No: 12.55.1P No: 104 V-2) ---- Complete with all lead Sqm 2791.88 2791.88 34.94 False None None False None False 97548.2872 0 2990336 99331 None Item No 12.55.1P No 104 V-2 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges. -do- with both side prelam Item No: 12.55.1P No: 104 V-2 ---- Complete with all lead Sqm 2791.88 2791.88 29.71 False None None False None False 82946.7548 0 2990337 99331 None Item No 15.1P No149 V-2 Providing and laying water proofing treatment to the Roof with PU basedsingle component elastomeric pure polyurethane based coating onNew terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PUwaterproofing membrane that is highly elastic with elongation greaterthan 400% and tensile strength greater than 2MPa as per ASTM D412.The waterproofing membrane to be applied in 2coats @ 1.6kg per m2to achieve final DFT (dry film thickness) of 1mm including prime coat ofepoxy primer @150 g per m2 and protection with 120gsm Geo-textileover the waterproofing membrane. The finished cost to include surfacepreparation, making coving at Junction, Bore Packing, treatment ofconstruction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. (Item No: 15.1P No:149 V-2) ---- Complete with all lead Sqm 964.06 964.06 693.01 False None None False None False 668103.2206 0 2990338 99331 None Item No 9.9 P No 60 V-2 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete. (Item No: 9.9 P No: 60 V-2) ---- Complete with all lead Sqm 1269.68 1269.68 35.09 False None None False None False 44553.0712 0 2990339 99331 None Item No 9.9 P No 60 V-2 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete. Item No: 9.9 P No: 60 V-2 ---- Complete with all lead Sqm 1269.68 1269.68 38.93 False None None False None False 49428.6424 0 2990340 99331 None Item No 9.38 P No 65 V-2 Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. .(Item No: 9.38 P No: 65 V-2) ---- Complete with all lead Sqm 1642.56 1642.56 76.28 False None None False None False 125294.4768 0 2990341 99331 None Item No 9.38 P No 65 V-2 Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. .(Item No: 9.38 P No: 65 V-2) ---- Complete with all lead Sqm 1642.56 1642.56 77.76 False None None False None False 127725.4656 0 2990342 99331 None Item No 9.21.2 P No 62 V-2 Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than0.08% and conforming to IS:15622, of approved brand & manufacturer,in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). . Size of Tile 600x600 mm Item No: 9.21.2 P No: 62 V-2 ---- Complete with all lead Sqm 1460.84 1460.84 338.29 False None None False None False 494187.5636 0 2990343 99331 None Item No 9.21.2 P No 62 V-2 Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than0.08% and conforming to IS:15622, of approved brand & manufacturer,in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). . Size of Tile 600x600 mm Item No: 9.21.2 P No: 62 V-2 ---- Complete with all lead Sqm 1460.84 1460.84 431.85 False None None False None False 630863.754 0 2990344 99331 None Item No 9.23 P No 63 V-2 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as rvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade ncluding rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. **Flamed finish granite stone slab Black, Cat Eye, River Pink or equivalent.. (Item No: 9.23 P No: 63 V-2) ---- Complete with all lead Sqm 2909.88 2909.88 273.23 False None None False None False 795066.5124 0 2990345 99331 None Item No 9.23 P No 63 V-2 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. **Flamed finish granite stone slab Black, Cat Eye, River Pink or equivalent.( Item No: 9.23 P No: 63 V-2) ---- Complete with all lead Sqm 2909.88 2909.88 210.58 False None None False None False 612762.5304 0 2990346 99331 None Item No 8.4.2 P No 41 V-2 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Item No: 8.4.2 P No: 41 V-2 ---- Complete with all lead Sqm 368.16 368.16 1232.81 False None None False None False 453871.3296 0 2990347 99331 None Item No 8.4.2 P No 41 V-2 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Item No: 8.4.2 P No: 41 V-2 ---- Complete with all lead Sqm 368.16 368.16 1346.87 False None None False None False 495863.6592 0 2990348 99331 None Item No 8.2.2 P No 41 V-2 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Item No: 8.2.2 P No: 41 V-2 ---- Complete with all lead Sqm 329.22 329.22 365.28 False None None False None False 120257.4816 0 2990349 99331 None Item No 8.2.2 P No 41 V-2 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Item No: 8.2.2 P No: 41 V-2 ---- Complete with all lead Sqm 329.22 329.22 681.85 False None None False None False 224478.657 0 2990350 99331 None Item No 8.22 P No 44 V-2 Providing lime wash on walls with one coat with lime of approved quality to give an even shade, including cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Item No: 8.22 P No: 44 V-2 ---- Complete with all lead Cum 11.8 11.8 1796.3 False None None False None False 21196.34 0 2990351 99331 None Item No 8.54.2 P No 50 V-2 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge.( Item No: 8.54.2 P No: 50 V-2) ---- Complete with all lead Sqm 129.8 129.8 1913.3 False None None False None False 248346.34 0 2990352 99331 None Item No 8.55.1 P No 50 V-2 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre as per specifications and as per directions of Engineer in charge. (Item No: 8.55.1 P No: 50 V-2) ---- Complete with all lead Sqm 66.08 66.08 46.17 False None None False None False 3050.9136 0 2990353 99331 None Item No 8.55.1 P No 50 V-2 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre as per specifications and as per directions of Engineer in charge.( Item No: 8.55.1 P No: 50 V-2) ---- Complete with all lead Sqm 66.08 66.08 28.41 False None None False None False 1877.3328 0 2990354 99331 None Item No 8.37P No 48 V-2 Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :New work (two coats) including a coat of approved steel primer but excluding a coat of mordant solution including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (Item No: 8.37P No: 48 V-2) ---- Complete with all lead Sqm 154.58 154.58 84.3 False None None False None False 13031.094 0 2990355 99331 None Item No 8.37P No 48 V-2 Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :New work (two coats) including a coat of approved steel primer but excluding a coat of mordant solution including preparing the surface after thoroughly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (Item No: 8.37P No: 48 V-2) ---- Complete with all lead Sqm 154.58 154.58 92.85 False None None False None False 14352.753 0 2990356 99331 None Item No 8.3 P No 46 V-2 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (Item No: 8.3 P No: 46 V-2) ---- Complete with all lead Sqm 205.32 205.32 1047.13 False None None False None False 214996.7316 0 2990357 99331 None Item No 12.90 P No 110 V-2 Providing and fixing of 3 track x 2 panel sliding windows ade out of multi chambered UPVC(Matching toRAL 9016) sections and with minimumTiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) andlead free, gaskets grey colour having isolated drainage and reinforced withGalvanized Iron profile through-out the window frame. The outer framehaving an overall size of 108mm width X 45mmheight with reinforcementof 1mm thickness and Sash with overall size of 39mm x 75mm with GIreinforcement of 2mm and mesh sash of size 37mm x 58mm. CoextrudedGlazing bead for fixing of glass shall be of size 20mm x 24 mm. Windowsshall be provided with 6mm plain float glass, standard hardware& Multipoint locking system with touch lock. Wall thickness of frame & sash shallbe of 2mm 2.5mm. Maximum possible size 2419mm x 2200mm. (Thecost is inclusive of all fixtures and separate charges for minor T and Ps shall not be made) (Item No: 12.90 P No: 110 V-2) ---- Complete with all lead Sqm 7946.12 7946.12 84.3 False None None False None False 669857.916 0 2990358 99331 None Item No 12.90 P No 110 V-2 Providing and fixing of 3 track x 2 panel sliding windows made out of multi chambered UPVC(Matching toRAL 9016) sections and with minimumTiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) andlead free, gaskets -grey colour having isolated drainage and reinforced withGalvanized Iron profile through out the window frame. The outer framehaving an overall size of 108mm width x 45mmheight with reinforcementof 1mm thickness and Sash with overall size of 39mm x 75mm with GIreinforcement of 2mm and mesh sash of size 37mm x 58mm. CoextrudedGlazing bead for fixing of glass shall be of size 20mm x 24 mm. Windowsshall be provided with 6mm plain float glass, standard hardware& Multipoint locking system with touch lock. Wall thickness of frame & sash shallbe of 2mm 2.5mm. Maximum possible size 2419mm x 2200mm. (Thecost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) (Item No: 12.90 P No: 110 V-2) ---- Complete with all lead Sqm 7946.12 7946.12 92.85 False None None False None False 737797.242 0 2990359 99331 None Item No 11.44 P No 91, V-2 Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete including cost of materials, labour, usage charges of machinery complete (Item No: 11.44 P No: 91, V-2) ---- Complete with all lead Sqm 5127.1 5127.1 3.78 False None None False None False 19380.438 0 2990360 99331 None P No 63, Item No 9..25, V-2 Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (P No: 63, Item No: 9..25, V-2) ---- Complete with all lead Sqm 944.0 944.0 28.0 False None None False None False 26432.0 0 2990361 99331 None P No A-15Item No 114 V-2 Providing and laying Chicken Mesh (.P No: A-15Item No: 114 V-2) ---- Complete with all lead Sqm 14.16 14.16 709.92 False None None False None False 10052.4672 0 1710159507000 0 None None Buildings Water supply and Sanitary works PART-B 1312086.7 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2990362 99332 None P No 5 Item No 1.4.1 V-1 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. 1.4.1 In all kinds of soils Depth upto 1.5 m (P No: 5 Item No 1.4.1 V-1) ---- Complete with all lead Cum 285.56 285.56 27.0 False None None False None False 7710.12 0 2990363 99332 None P No 7 Item No 1.10 V-1 Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m. Including cost of all labour complete as per specifications ( P No: 7 Item No 1.10 V-1 ) ---- Complete with all lead Cum 188.8 188.8 27.0 False None None False None False 5097.6 0 2990364 99332 None Item no 13.31.6, page no 122 V-2 Providing and fixing CPVC pipes having thermal stabillity for hot & cold water supply,inculiding all CPVC plain &brass threaded fittings fixing the pipes with clams at1.00 m spacing this inculdes jointing of pipes &fitting with one step CPVC solvent cement and testing of internal work-exposed on wall 50mm nominal dia (iteam no 13.31.6,page no 122 V-2) ---- Complete with all lead Mtr 921.58 921.58 70.0 False None None False None False 64510.6 0 2990365 99332 None Item no 13.31.3 page no 122,V-2 Providing and fixing CPVC pipes having thermal stabillity for hot & cold water supply,inculiding all CPVC plain &brass threaded fittings fixing the pipes with clams at1.00 m spacing this inculdes jointing of pipes &fitting with one step CPVC solvent cement and testing of internal work-exposed on wall 25mm nominal dia (iteam no 13.31.3 page no 122,.V-2) ---- Complete with all lead Mtr 375.24 375.24 150.0 False None None False None False 56286.0 0 2990366 99332 None Pg 119 Item 13.12 V-2 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931( Pg 119 Item 13.12 V-2) ---- Complete with all lead Nos 749.3 749.3 30.0 False None None False None False 22479.0 0 2990367 99332 None Pg 119 Item 13.15 V-2 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931(.Pg 119 Item 13.15 V-2) ---- Complete with all lead Nos 855.5 855.5 30.0 False None None False None False 25665.0 0 2990368 99332 None page no a-127,iteam no-13.59,V-2 Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete ( page no a-127,iteam no-13.59,V-2) ---- Complete with all lead Each 259.6 259.6 30.0 False None None False None False 7788.0 0 2990369 99332 None item no-13.4.3,page no117, V-2 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :40 mm nominal bore (item no-13.4.3,page no117, V-2) ---- Complete with all lead Each 828.36 828.36 4.0 False None None False None False 3313.44 0 2990370 99332 None item no-13.4.1,page no117, V-2 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :25 mm nominal bore (item no-13.4.1,page no117, V-2) ---- Complete with all lead Mtr 647.82 647.82 8.0 False None None False None False 5182.56 0 2990371 99332 None item no-13.5.3,page no117, V-2 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 25 mm nominal bore (itam no-13.5.3,page no117, V-2) ---- Complete with all lead Mtr 391.76 391.76 4.0 False None None False None False 1567.04 0 2990372 99332 None Pg 117 Item 13.6.1.1 V2 Providing and fixing gun metal non- return valve of approved quality (screwed end) 25 mm nominal bore : (Pg 117 Item 13.6.1.1 V2) ---- Complete with all lead Nos 731.6 731.6 3.0 False None None False None False 2194.8 0 2990373 99332 None Pg 118 Item 13.6.4 V2 Providing and fixing gun metal non- return valve of approved quality (screwed end) 50 mm nominal bore : (Pg 118 Item 13.6.4 V2) ---- Complete with all lead Nos 1605.98 1605.98 3.0 False None None False None False 4817.94 0 2990374 99332 None ITEM NO 14.5.3 PG NO-132 V-2 FOR 2 HP CENTRIFUGAL PUMP Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments 2 HP, Size 65x50 Head 13M, Discharge 462 LPM (Pg 164 Item 46.1 V5).-15425 Range of three half stall urinals with 10 litre P.V.C. automatic flushing cistern (ITEM NO 14.5.3 PG NO-132 V-2) ---- Complete with all lead Each 19045.2 19045.2 1.0 False None None False None False 19045.2 0 2990375 99332 None Item no13.53,page no126,V-2 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine san d : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 m thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay (non modular) bricks of class designation (item no13.53,page no126,V-2) ---- Complete with all lead Nos 6657.56 6657.56 8.0 False None None False None False 53260.48 0 2990376 99332 None Item no 13.54,page no 126,V-2 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 500X700 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine san d : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets :With common burnt clay (non modular) bricks of class designation 3.5(item no 13.54,page no 126,V-2) ---- Complete with all lead Each 7408.04 7408.04 4.0 False None None False None False 29632.16 0 2990377 99332 None Item no 13.52,page no 126,V-2 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size , foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With common burnt clay (non modular) bricks of class designation 3.5 (item no 13.52,page no 126,V-2) ---- Complete with all lead Nos 12467.88 12467.88 1.0 False None None False None False 12467.88 0 2990378 99332 None Item no 13.52.1,page no 126,V-2 Extra for depth for manholes : Size 90x80 cm With common burnt clay (non modular) bricks of class designation (item no 13.52.1,page no 126,V-2) ---- Complete with all lead Nos 10898.48 10898.48 1.0 False None None False None False 10898.48 0 2990379 99332 None P No 5 Item No 1.4.1 V-1 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. 1.4.1 In all kinds of soils Depth upto 1.5 m P No: 5 Item No 1.4.1 V-1 ---- Complete with all lead Cum 285.56 285.56 54.0 False None None False None False 15420.24 0 2990380 99332 None P No 7 Item No 1.10 V-1 Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m. Including cost of all labour complete as per specifications P No: 7 Item No 1.10 V-1 ) ---- Complete with all lead Cum 188.8 188.8 37.8 False None None False None False 7136.64 0 2990381 99332 None item no 13.64.1 pg no 128 V-2 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement,trenching, refilling & testing of joints complete as per direction of Engineer in Charge.75mm nominal dia pipes ( item no 13.64.1 pg no 128 V-2) ---- Complete with all lead Mtr 341.02 341.02 100.0 False None None False None False 34102.0 0 2990382 99332 None Item no 13.64.2 pg no 128 V-2 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement,trenching, refilling & testing of joints complete as per direction of Engineer in Charge.150 mm nominal dia pipes ( item no 13.64.2 pg no 128 V-2) ---- Complete with all lead Mtr 906.24 906.24 230.0 False None None False None False 208435.2 0 2990383 99332 None Iteam no1.15.2,page no9,V-1 SEPTIC TANK & SOAK PIT Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications,including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work Depth exceeding 1.5 m, but not exceeding 3 m (iteam no1.15.2,page no9,V-1) ---- Complete with all lead Cum 501.5 501.5 42.0 False None None False None False 21063.0 0 2990384 99332 None Iteam no5.1.1,page no9,V-2 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : 5.1.1 Cement mortar 1:6 (1 cement : 6 coarse sand (iteam no5.1.1,page no9,V-2) ---- Complete with all lead Cum 6620.98 6620.98 22.95 False None None False None False 151951.491 0 2990385 99332 None Item no 2.4.2 Pg no - 16 V-1 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (item no 2.4.2 Pg no - 16 V-1) ---- Complete with all lead Cum 7461.14 7461.14 2.13 False None None False None False 15892.2282 0 2990386 99332 None Item No: 2.11h, P No 18, V-1 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. a. Buildings) Item No: 2.11h, P No: 18, V-1 ---- Complete with all lead Kgs 93232.98 93232.98 0.17 False None None False None False 15849.6066 0 2990387 99332 None Item No: 1.14.1, P No 8 V-1 SUMP Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work( Item No: 1.14.1, P No: 8 V-1) ---- Complete with all lead Cum 120.36 120.36 35.0 False None None False None False 4212.6 0 2990388 99332 None Item No: 2.1.2, P No 15 V-1 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded carse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates. Item No: 2.1.2, P No: 15 V-1 ---- Complete with all lead Cum 6683.52 6683.52 2.1 False None None False None False 14035.392 0 2990389 99332 None item no 2.4.2 Pg no - 16 V-1 M-20 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates item no 2.4.2 Pg no - 16 V-1 ---- Complete with all lead Cum 7461.14 7461.14 9.6 False None None False None False 71626.944 0 2990390 99332 None Item No 2.11h, P No 18, V-1 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. a. Buildings) Item No: 2.11h, P No: 18, V-1 ---- Complete with all lead Tonne 93232.98 93232.98 0.67 False None None False None False 62466.0966 0 2990391 99332 None Pg 131 Item 14.1.1 V2 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests Pg 131 Item 14.1.1 V2 ---- Complete with all lead Pan 5763.12 5763.12 5.0 False None None False None False 28815.6 0 2990392 99332 None Pg 131 Item 14.3.1 V2 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid: Pg 131 Item 14.3.1 V2 ---- Complete with all lead Each 7052.86 7052.86 18.0 False None None False None False 126951.48 0 2990393 99332 None Pg 133 Item 14.7.8 V-2 White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow including operated levers Pg 133 Item 14.7.8 V-2 ---- Complete with all lead Each 4853.34 4853.34 12.0 False None None False None False 58240.08 0 2990394 99332 None Pg 136 Item 14.31 V2 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Pg 136 Item 14.31 V2 ---- Complete with all lead Nos 1439.6 1439.6 18.0 False None None False None False 25912.8 0 2990395 99332 None P No: 137 Item No: 14.40.1 V-2 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 14.40.1 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 g. P No: 137 Item No: 14.40.1 V-2 ---- Complete with all lead Each 564.04 564.04 6.0 False None None False None False 3384.24 0 2990396 99332 None Item no-14.4.1,page no 131,V-2 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 14.4.1 One urinal basin with 5 litre white P.V.C. automatic flushing cistern(iteam no-14.4.1,page no 131,V-2) ---- Complete with all lead Each 5255.72 5255.72 12.0 False None None False None False 63068.64 0 2990397 99332 None Item no-10.8,page no 70,V-2 Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth.(iteam no-10.8,page no 70,V-2) ---- Complete with all lead Cum 3291.02 3291.02 6.0 False None None False None False 19746.12 0 2990398 99332 None Item no-13.34, page no 123,V-2 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank(item no-13.34,page no 123,V-2) ---- Complete with all lead Ltr 10.62 10.62 3000.0 False None None False None False 31860.0 0 1710159507000 0 None None Buildings Providing electrification to proposed District Training Centre Building (GF and FF) at Kolar Town and Taluk, Kolar District. 3279874.86 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2990399 99333 None 1.2.1 Supplying heavy gauge PVC conduit pipe ...... mm dia.......... mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary (Make : VIP / Nandi / VI plast)......19/20 mm dia 2 mm thick ---- Complete with all lead m 80.22 80.22 770.0 False None None False None False 61769.4 0 2990400 99333 None 1.2.2 Supplying heavy gauge PVC conduit pipe ...... mm dia.......... mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary (Make : VIP / Nandi / VI plast)......25 mm dia 2 mm thick ---- Complete with all lead m 94.8 94.8 920.0 False None None False None False 87216.0 0 2990401 99333 None 1.2.3 Supplying heavy gauge PVC conduit pipe ...... mm dia.......... mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary (Make : VIP / Nandi / VI plast)......32 mm dia 2.5 mm thick ---- Complete with all lead m 128.83 128.83 240.0 False None None False None False 30919.2 0 2990402 99333 None 1.3.1 Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. (Make : VIP / Nandi / VI plast)...........19/20 mm dia 2 mm thick ---- Complete with all lead m 82.65 82.65 640.0 False None None False None False 52896.0 0 2990403 99333 None 1.3.2 Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. (Make : VIP / Nandi / VI plast)...........25 mm dia 2 mm thick ---- Complete with all lead m 96.02 96.02 1130.0 False None None False None False 108502.6 0 2990404 99333 None 1.3.3 Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. (Make : VIP / Nandi / VI plast)...........32 mm dia 2.5 mm thick ---- Complete with all lead m 120.32 120.32 330.0 False None None False None False 39705.6 0 2990405 99333 None 1.4.3 Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc…………..135 x 75 x 65 mm ---- Complete with all lead Each 168.94 168.94 10.0 False None None False None False 1689.4 0 2990406 99333 None 1.4.4 Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc…………..180 x 90 x 65 mm ---- Complete with all lead Each 195.68 195.68 14.0 False None None False None False 2739.52 0 2990407 99333 None 1.4.5 Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc…………..200 x 90 x 65 mm ---- Complete with all lead Each 217.56 217.56 6.0 False None None False None False 1305.36 0 2990408 99333 None 1.5.1 Supplying and fixing PVC/metal conduit Deep junction box……...19/20 mm deep Junction box ---- Complete with all lead Each 59.55 59.55 100.0 False None None False None False 5955.0 0 2990409 99333 None 1.5.2 Supplying and fixing PVC/metal conduit Deep junction box……...25 mm deep Junction box ---- Complete with all lead Each 68.06 68.06 52.0 False None None False None False 3539.12 0 2990410 99333 None 1.5.3 Supplying and fixing PVC/metal conduit Deep junction box……...32 mm deep Junction box ---- Complete with all lead Each 74.14 74.14 20.0 False None None False None False 1482.8 0 2990411 99333 None 1.9.1 Supplying PVC flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using NF screws and on either end of the pipe terminated completely (Make : VIP / Nandi / VI plast).........20 mm ---- Complete with all lead m 23.09 23.09 20.0 False None None False None False 461.8 0 2990412 99333 None 1.9.2 Supplying PVC flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using NF screws and on either end of the pipe terminated completely (Make : VIP / Nandi / VI plast).........25 mm ---- Complete with all lead m 26.74 26.74 10.0 False None None False None False 267.4 0 2990413 99333 None 1.9.3 Supplying PVC flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using NF screws and on either end of the pipe terminated completely (Make VIP / Nandi / VI plast).........32mm ---- Complete with all lead m 35.25 35.25 10.0 False None None False None False 352.5 0 2990414 99333 None 1.13 Supplying And Fixing Metal Fan Box with Round Hook. ---- Complete with all lead Each 142.2 142.2 63.0 False None None False None False 8958.6 0 2990415 99333 None 2.2.1 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet...........Short point upto 3Mtr from tapping point to out let via switch box ---- Complete with all lead Point 326.94 326.94 84.0 False None None False None False 27462.96 0 2990416 99333 None 2.2.2 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet...........Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box ---- Complete with all lead Point 460.64 460.64 136.0 False None None False None False 62647.04 0 2990417 99333 None 2.2.3 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet...........Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box ---- Complete with all lead Point 674.55 674.55 111.0 False None None False None False 74875.05 0 2990418 99333 None 2.3.1 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 (Make : Havells / Finolex / Anchor / Polycab / V-Gaurd).........1 mm2 ---- Complete with all lead m 23.09 23.09 1200.0 False None None False None False 27708.0 0 2990419 99333 None 2.3.2 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 (Make : Havells / Finolex / Anchor / Polycab / V-Gaurd).........1.5 mm2 ---- Complete with all lead m 31.6 31.6 920.0 False None None False None False 29072.0 0 2990420 99333 None 2.3.3 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 (Make : Havells / Finolex / Anchor / Polycab / V-Gaurd).........2.5 mm2 ---- Complete with all lead m 51.05 51.05 2400.0 False None None False None False 122520.0 0 2990421 99333 None 2.3.4 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 (Make : Havells / Finolex / Anchor / Polycab / V-Gaurd).........4 mm2 ---- Complete with all lead m 76.57 76.57 1200.0 False None None False None False 91884.0 0 2990422 99333 None 2.3.5 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 (Make : Havells / Finolex / Anchor / Polycab / V-Gaurd).........6 mm2 ---- Complete with all lead m 111.82 111.82 240.0 False None None False None False 26836.8 0 2990423 99333 None 3.4.1 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/ C.C wall (Make : Anchor / Indo Asian / Lisha / Cona )………..1-2 Way ---- Complete with all lead Each 167.73 167.73 26.0 False None None False None False 4360.98 0 2990424 99333 None 3.4.2 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/ C.C wall (Make : Anchor / Indo Asian / Lisha / Cona )………..3 Way ---- Complete with all lead Each 193.25 193.25 12.0 False None None False None False 2319.0 0 2990425 99333 None 3.4.3 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/ C.C wall (Make : Anchor / Indo Asian / Lisha / Cona )………..4-5 Way ---- Complete with all lead Each 215.13 215.13 22.0 False None None False None False 4732.86 0 2990426 99333 None 3.4.4 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/ C.C wall (Make : Anchor / Indo Asian / Lisha / Cona )………..6 Way ---- Complete with all lead Each 267.39 267.39 4.0 False None None False None False 1069.56 0 2990427 99333 None 3.4.5 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/ C.C wall (Make : Anchor / Indo Asian / Lisha / Cona )………..8 Way ---- Complete with all lead Each 317.22 317.22 58.0 False None None False None False 18398.76 0 2990428 99333 None 3.4.6 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/ C.C wall (Make : Anchor / Indo Asian / Lisha / Cona )………..10-12 Way ---- Complete with all lead Each 387.71 387.71 28.0 False None None False None False 10855.88 0 2990429 99333 None 3.4.7 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/ C.C wall (Make : Anchor / Indo Asian / Lisha / Cona )………..16 Way ---- Complete with all lead Each 441.19 441.19 3.0 False None None False None False 1323.57 0 2990430 99333 None 3.4.8 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/ C.C wall (Make : Anchor / Indo Asian / Lisha / Cona )………..18 Way ---- Complete with all lead Each 492.24 492.24 4.0 False None None False None False 1968.96 0 2990431 99333 None 3.5.1 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/ PVC box. (Make : Anchor / Indo Asian / Lisha / C ---- Complete with all lead Each 166.51 166.51 26.0 False None None False None False 4329.26 0 2990432 99333 None 3.5.2 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/ PVC box. (Make : Anchor / Indo Asian / Lisha / C ---- Complete with all lead Each 195.68 195.68 12.0 False None None False None False 2348.16 0 2990433 99333 None 3.5.3 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/ PVC box. (Make : Anchor / Indo Asian / Lisha / C ---- Complete with all lead Each 212.7 212.7 22.0 False None None False None False 4679.4 0 2990434 99333 None 3.5.4 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/ PVC box. (Make : Anchor / Indo Asian / Lisha / C ---- Complete with all lead Each 284.4 284.4 4.0 False None None False None False 1137.6 0 2990435 99333 None 3.5.5 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/ PVC box. (Make : Anchor / Indo Asian / Lisha / C ---- Complete with all lead Each 345.17 345.17 58.0 False None None False None False 20019.86 0 2990436 99333 None 3.5.6 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/ PVC box. (Make : Anchor / Indo Asian / Lisha / C ---- Complete with all lead Each 418.1 418.1 28.0 False None None False None False 11706.8 0 2990437 99333 None 3.5.7 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/ PVC box. (Make : Anchor / Indo Asian / Lisha / C ---- Complete with all lead Each 482.51 482.51 3.0 False None None False None False 1447.53 0 2990438 99333 None 3.5.8 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/ PVC box. (Make : Anchor / Indo Asian / Lisha / C ---- Complete with all lead Each 555.44 555.44 4.0 False None None False None False 2221.76 0 2990439 99333 None 3.6.1 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (Make: Anchor / Indo Asian / Lisha / Cona)………...6A One Way Switch ---- Complete with all lead Each 123.97 123.97 533.0 False None None False None False 66076.01 0 2990440 99333 None 3.6.2 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (Make: Anchor / Indo Asian / Lisha / Cona)………...6A Two Way Switch ---- Complete with all lead Each 201.76 201.76 8.0 False None None False None False 1614.08 0 2990441 99333 None 3.6.3 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (Make: Anchor / Indo Asian / Lisha / Cona)………...6A Three Way socket ---- Complete with all lead Each 207.83 207.83 209.0 False None None False None False 43436.47 0 2990442 99333 None 3.6.4 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (Make: Anchor / Indo Asian / Lisha / Cona)………...Stepped Fan Regulator Two Module ---- Complete with all lead Each 433.9 433.9 63.0 False None None False None False 27335.7 0 2990443 99333 None 3.6.8 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (Make: Anchor / Indo Asian / Lisha / Cona)………...6A Bell Push ---- Complete with all lead Each 215.13 215.13 8.0 False None None False None False 1721.04 0 2990444 99333 None 3.6.9 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (Make: Anchor / Indo Asian / Lisha / Cona)………...32A DP Switch ---- Complete with all lead Each 396.22 396.22 31.0 False None None False None False 12282.82 0 2990445 99333 None 3.6.10 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (Make: Anchor / Indo Asian / Lisha / Cona)………...6/16A Universal Socket ---- Complete with all lead Each 286.83 286.83 31.0 False None None False None False 8891.73 0 2990446 99333 None 3.6.11 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (Make: Anchor / Indo Asian / Lisha / Cona)………...TV/Telephone Socket ---- Complete with all lead Each 189.6 189.6 14.0 False None None False None False 2654.4 0 2990447 99333 None 3.6.12 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (Make: Anchor / Indo Asian / Lisha / Cona)………...RJ45/I.O Outlet Cat-6 ---- Complete with all lead Each 409.59 409.59 60.0 False None None False None False 24575.4 0 2990448 99333 None 5.46.1 Supplying and fixing of Modular MCB Devices (Tripper) With Breaking capacity of 6kA……..16 - 32 A SP ---- Complete with all lead Each 255.23 255.23 39.0 False None None False None False 9953.97 0 2990449 99333 None 3.8.0 Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc, and fixing on existing wooden or metal box using N.F. screws. ---- Complete with all lead Sqm 0.5 0.5 17000.0 False None None False None False 8500.0 0 2990450 99333 None 3.10.2 Supplying 4 mm thick white plastic plate and covering for junction boxes of size ...... mm conduit using necessary machine screws……..80/90 mm ---- Complete with all lead No 18.23 18.23 185.0 False None None False None False 3372.55 0 2990451 99333 None 3.10.3 Supplying 4 mm thick white plastic plate and covering for junction boxes of size ...... mm conduit using necessary machine screws……..110 mm ---- Complete with all lead No 25.52 25.52 63.0 False None None False None False 1607.76 0 2990452 99333 None 3.14.5 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board…....6A Bakelite Ceiling Rose ---- Complete with all lead No 94.8 94.8 25.0 False None None False None False 2370.0 0 2990453 99333 None 3.14.6 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board…....6A Pendant Holder ---- Complete with all lead No 86.29 86.29 45.0 False None None False None False 3883.05 0 2990454 99333 None 3.14.7 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board…....6A Batten Holder ---- Complete with all lead No 89.94 89.94 86.0 False None None False None False 7734.84 0 2990455 99333 None 3.14.13 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board…....16A Three Pin Top ---- Complete with all lead No 133.69 133.69 4.0 False None None False None False 534.76 0 2990456 99333 None 5.42.1 Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with ---- Complete with all lead Sq CM 0.61 0.61 280000.0 False None None False None False 170800.0 0 2990457 99333 None 5.41.1 Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint………..40 x 40 x 6 mm ---- Complete with all lead m 370.7 370.7 10.0 False None None False None False 3707.0 0 2990458 99333 None 5.41.4 Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint………..50 x 100 x 50 x 6 mm C channel ---- Complete with all lead m 918.84 918.84 6.0 False None None False None False 5513.04 0 2990459 99333 None 5.40.1 Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/ FRP/ DMC insulator which are mounted on powder coated 40x6mm M.S.flat f ---- Complete with all lead m 2995.96 2995.96 1.5 False None None False None False 4493.94 0 2990460 99333 None 5.40.2 Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/ FRP/ DMC insulator which are mounted on powder coated 40x6mm M.S.flat f ---- Complete with all lead m 4174.9 4174.9 1.5 False None None False None False 6262.35 0 2990461 99333 None 5.34 Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. ---- Complete with all lead Each 683.05 683.05 3.0 False None None False None False 2049.15 0 2990462 99333 None 5.38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. ---- Complete with all lead Each 625.93 625.93 5.0 False None None False None False 3129.65 0 2990463 99333 None 5.29 Supplying, fixing and wiring 3 Phase Digital Ammeter / Voltmeter ---- Complete with all lead Each 1731.95 1731.95 2.0 False None None False None False 3463.9 0 2990464 99333 None 5.27 Supplying, fixing and wiring rotary selector switch suitable for Ammeter ---- Complete with all lead Each 243.08 243.08 1.0 False None None False None False 243.08 0 2990465 99333 None 5.28 Supplying, fixing and wiring rotary selector switch suitable for Voltmeter ---- Complete with all lead Each 194.46 194.46 1.0 False None None False None False 194.46 0 2990466 99333 None 5.21 Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage current, programmable delay/auto/ manual reset faci ---- Complete with all lead Each 11248.53 11248.53 1.0 False None None False None False 11248.53 0 2990467 99333 None 5.33 Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely ---- Complete with all lead Each 11321.45 11321.45 1.0 False None None False None False 11321.45 0 2990468 99333 None 5.31 Supplying and fixing Electronic Trivector Meter (ETV) suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and completely wired. ---- Complete with all lead Each 5335.61 5335.61 1.0 False None None False None False 5335.61 0 2990469 99333 None 5.11.3 Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. (Open Execution) (Make : ABB / HPL / Havells / Schinder )………...125 A ---- Complete with all lead Each 12550.22 12550.22 1.0 False None None False None False 12550.22 0 2990470 99333 None 13.18.2 Fixing of ..... A TPST / change over switch / Contactor along with neutral link with screws, bolts, nuts and wiring using required capacity wires and circuit labelling…….100A to 250A TPST ---- Complete with all lead Each 543.28 543.28 1.0 False None None False None False 543.28 0 2990471 99333 None 5.15.9 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuitwith adjustable thermal magnet ---- Complete with all lead Each 10315.1 10315.1 2.0 False None None False None False 20630.2 0 2990472 99333 None 5.15.11 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuitwith adjustable thermal magnet ---- Complete with all lead Each 16343.48 16343.48 1.0 False None None False None False 16343.48 0 2990473 99333 None 5.18.1 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required ---- Complete with all lead Each 504.39 504.39 8.0 False None None False None False 4035.12 0 2990474 99333 None 5.18.4 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required ---- Complete with all lead Each 898.18 898.18 20.0 False None None False None False 17963.6 0 2990475 99333 None 5.18.5 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required ---- Complete with all lead Each 1288.32 1288.32 20.0 False None None False None False 25766.4 0 2990476 99333 None 5.18.7 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required ---- Complete with all lead Each 2086.84 2086.84 7.0 False None None False None False 14607.88 0 2990477 99333 None 5.18.8 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required ---- Complete with all lead Each 3699.68 3699.68 7.0 False None None False None False 25897.76 0 2990478 99333 None 5.19.9 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting ---- Complete with all lead Each 2830.67 2830.67 5.0 False None None False None False 14153.35 0 2990479 99333 None 5.19.10 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting ---- Complete with all lead Each 3534.38 3534.38 8.0 False None None False None False 28275.04 0 2990480 99333 None 5.19.14 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting ---- Complete with all lead Each 10616.52 10616.52 2.0 False None None False None False 21233.04 0 2990481 99333 None 5.19.15 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting ---- Complete with all lead Each 12634.08 12634.08 4.0 False None None False None False 50536.32 0 2990482 99333 None 11.3.1 Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V at 50/60Hz and Power factor greater than 0.9 along with CE approved ---- Complete with all lead Each 669.69 669.69 6.0 False None None False None False 4018.14 0 2990483 99333 None 11.3.2 Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours and 70 percent lumen maintenance with CRI greater than 80. Power Input: 220-240V at 50/60 Hz and Power factor greater than 0.9 along with CE approved ---- Complete with all lead Each 838.63 838.63 118.0 False None None False None False 98958.34 0 2990484 99333 None 11.3.3 Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V@ 50/60Hz & Power factor greater than 0.9 along with CE approved ---- Complete with all lead Each 1542.34 1542.34 12.0 False None None False None False 18508.08 0 2990485 99333 None 11.6.2 Supplying of recess mounting non integral type ........ LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degree K, CRI greater than 70%. efficacy CRI greater than 100 lumen per W, ---- Complete with all lead Each 4487.26 4487.26 14.0 False None None False None False 62821.64 0 2990486 99333 None 11.6.3 Supplying of recess mounting non integral type ........ LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degree K, CRI CRI greater than 70%. efficacy CRI greater than 100 lumen per W, ---- Complete with all lead Each 5533.72 5533.72 12.0 False None None False None False 66404.64 0 2990487 99333 None 13.7.1 Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamps………...On wall/ ---- Complete with all lead Each 148.28 148.28 162.0 False None None False None False 24021.36 0 2990488 99333 None 11.11.6 Supplying & fixing of retrofit type - LED bulb ...... W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI CRI greater than 70%. efficacy CRI greater than 80 lumen per W, life CRI greater than 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM ---- Complete with all lead Each 396.22 396.22 46.0 False None None False None False 18226.12 0 2990489 99333 None 12.46 Supplying & Fixing of 70-150 W lamp holder 2 Pin ---- Complete with all lead No 76.57 76.57 46.0 False None None False None False 3522.22 0 2990490 99333 None 6.3.1 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system. (Make : Usha / Almonard / Bajaj / Khait ---- Complete with all lead Each 3626.75 3626.75 63.0 False None None False None False 228485.25 0 2990491 99333 None 6.5.1 Supplying wall mounting fan suitable to operate at single- phase 230v AC. supply. (Make : Usha / Almonard / Bajaj / Khaitan / crompton)…….300 mm Sweep ---- Complete with all lead Each 3028.78 3028.78 6.0 False None None False None False 18172.68 0 2990492 99333 None 13.10 Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated tw ---- Complete with all lead Each 207.83 207.83 69.0 False None None False None False 14340.27 0 2990493 99333 None 13.12 Extra length of GI pipe of class B 19mm dia for down rod. ---- Complete with all lead m 239.43 239.43 63.0 False None None False None False 15084.09 0 2990494 99333 None 6.2.1 Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. (Make : Usha / Almonard / Bajaj / Khaitan / crompton)……….12" Sweep (300 mm) ---- Complete with all lead Each 3608.52 3608.52 25.0 False None None False None False 90213.0 0 2990495 99333 None 13.14 Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire. ---- Complete with all lead Each 597.98 597.98 25.0 False None None False None False 14949.5 0 2990496 99333 None 12.2.1 Supplying and fixing one of 230 V Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote……….Ding Dong Bell ---- Complete with all lead Each 298.99 298.99 8.0 False None None False None False 2391.92 0 2990497 99333 None 12.2.3 Supplying and fixing one of 230 V Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote……….Remote ---- Complete with all lead Each 1446.33 1446.33 5.0 False None None False None False 7231.65 0 2990498 99333 None 8.1 Supplying and drawing UTP-CAT 6E LAN cable. (Make : D-Link / Poycab / Finolex) ---- Complete with all lead m 46.19 46.19 1250.0 False None None False None False 57737.5 0 2990499 99333 None 8.2.4 Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable. (Make : D-Link / Polycab / Finolex)………...4Pair ---- Complete with all lead m 42.54 42.54 230.0 False None None False None False 9784.2 0 2990500 99333 None 8.4.1 Supplying & Fixing of switch mounting rack with power manager & Cable manager. (Make : D-Link / TP - Link)………..4U with 450mm depth ---- Complete with all lead Each 5945.74 5945.74 2.0 False None None False None False 11891.48 0 2990501 99333 None 8.4.3 Supplying & Fixing of switch mounting rack with power manager & Cable manager. (Make : D-Link / TP - Link)………..9U with 450mm depth ---- Complete with all lead Each 10301.73 10301.73 5.0 False None None False None False 51508.65 0 2990502 99333 None 8.4.4 Supplying & Fixing of switch mounting rack with power manager & Cable manager. (Make : D-Link / TP - Link)………..12U with 450mm depth ---- Complete with all lead Each 10738.06 10738.06 3.0 False None None False None False 32214.18 0 2990503 99333 None 8.9.1 Supplying fixing of Network Switches (Make : Cisco / D-Link / TP - Link / Hewlett Packard)…...48 Port Gigabyte (manageable) ---- Complete with all lead Each 59420.91 59420.91 1.0 False None None False None False 59420.91 0 2990504 99333 None 8.9.2 Supplying fixing of Network Switches (Make : Cisco / D-Link / TP - Link / Hewlett Packard)…...24 Port Gigabyte (manageable) ---- Complete with all lead Each 50378.33 50378.33 2.0 False None None False None False 100756.66 0 2990505 99333 None 8.9.10 Supplying fixing of Network Switches (Make : Cisco / D-Link / TP - Link / Hewlett Packard)…...24 port 10/100/1000 Switch ---- Complete with all lead Each 9012.19 9012.19 2.0 False None None False None False 18024.38 0 2990506 99333 None 8.9.11 Supplying fixing of Network Switches (Make : Cisco / D-Link / TP - Link / Hewlett Packard)…...16 port 10/100/1000 Switch ---- Complete with all lead Each 7827.18 7827.18 2.0 False None None False None False 15654.36 0 2990507 99333 None 8.10.1 Supplying & fixing of I/O socket with back box (Make : Cisco / D-Link / TP - Link / Hewlett Packard)……….Single I/O ---- Complete with all lead Each 595.55 595.55 48.0 False None None False None False 28586.4 0 2990508 99333 None 8.10.2 Supplying & fixing of I/O socket with back box (Make : Cisco / D-Link / TP - Link / Hewlett Packard)……….Double I/O ---- Complete with all lead Each 668.47 668.47 20.0 False None None False None False 13369.4 0 2990509 99333 None 8.11.1 Supplying & Fixing of ... ms Cat 6 Patch Cable (Make : D-Link / Poycab / Finolex)……...1 m ---- Complete with all lead Each 272.25 272.25 48.0 False None None False None False 13068.0 0 2990510 99333 None 8.11.2 Supplying & Fixing of ... ms Cat 6 Patch Cable (Make : D-Link / Poycab / Finolex)……...2 m ---- Complete with all lead Each 312.36 312.36 20.0 False None None False None False 6247.2 0 2990511 99333 None 8.12.1 Supplying & Fixing of Patch panel for LAN cabling (Make : D-Link / TP - Link)…….48 Port 10/100 patch panel ---- Complete with all lead Each 17161.45 17161.45 1.0 False None None False None False 17161.45 0 2990512 99333 None 8.12.2 Supplying & Fixing of Patch panel for LAN cabling (Make : D-Link / TP - Link)…….24 Port 101100 patch panel ---- Complete with all lead Each 4983.14 4983.14 4.0 False None None False None False 19932.56 0 2990513 99333 None 8.12.3 Supplying & Fixing of Patch panel for LAN cabling (Make : D-Link / TP - Link)…….16 Port 10/100 patch panel ---- Complete with all lead Each 3706.97 3706.97 2.0 False None None False None False 7413.94 0 2990514 99333 None 11.8.4 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior li ---- Complete with all lead Each 10768.44 10768.44 8.0 False None None False None False 86147.52 0 2990515 99333 None 13.2.1 Supplying and Fixing........mm dia clampsss A GI pipe bracket upto 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL street light fitting of all capacities on rail/RCC/wa ---- Complete with all lead Each 1462.13 1462.13 8.0 False None None False None False 11697.04 0 2990516 99333 None 13.5 Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. ---- Complete with all lead Each 196.89 196.89 8.0 False None None False None False 1575.12 0 2990517 99333 None 12.56 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal ---- Complete with all lead No 4266.05 4266.05 14.0 False None None False None False 59724.7 0 2990518 99333 None 12.58.2 GI/Copper strips for grounding connections, using necessary fixing materials as required……...25 x 3 mm GI strip ---- Complete with all lead m 99.66 99.66 45.0 False None None False None False 4484.7 0 2990519 99333 None 12.58.7 GI/Copper strips for grounding connections, using necessary fixing materials as required……...25 x 3 mm Copper strip ---- Complete with all lead m 692.78 692.78 24.0 False None None False None False 16626.72 0 2990520 99333 None ESCOM SR 2023-24 Sl.No.60 Item No.8.01 Supplying of Guy Wire & GI Wire as per BESCOM Specification. (Page-435-436)…...8 SWG GI Wire(4.064 mm Dia), Std Wt: 131 Kg/KM ---- Complete with all lead MT 91203.62 91203.62 0.13 False None None False None False 11856.4706 0 2990521 99333 None ESCOM SR 2023-24 Sl.No.197 Item No 32 Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 as per BESCOM specification. (Page : 443) (Make :V ---- Complete with all lead Km 172394.77 172394.77 0.15 False None None False None False 25859.2155 0 2990522 99333 None ESCOM SR 2023-24 Sl.No.197 Item No 33 Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 as per BESCOM specification. (Page : 443) (Make :V ---- Complete with all lead Km 453605.51 453605.51 0.2 False None None False None False 90721.102 0 2990523 99333 None ESCOM SR 2023-24 CDS-19 Labour charges for Laying of XLPE UG Cable Using Conventional Laying with Excavation of Soil (Page : 365)…….a) Cable trench excavation, 1000x0.6x1=600, Ordinary soil (Extracted from Vol-1, PWD SR Sl No. 1.17.1) ---- Complete with all lead Cum 318.43 318.43 210.0 False None None False None False 66870.3 0 2990524 99333 None ESCOM SR 2023-24 CDS-19 Labour charges for Laying of XLPE UG Cable Using Conventional Laying with Excavation of Soil (Page : 365)…….c) Refilling and consolidation (Extracted from Vol-1, PWD SR Sl No. 1.10) ---- Complete with all lead Cum 194.46 194.46 210.0 False None None False None False 40836.6 0 2990525 99333 None ESCOM SR 2023-24 CDS-19 Labour charges for Laying of XLPE UG Cable Using Conventional Laying with Excavation of Soil (Page : 365)…….h) supplying and Laying of RCC Hume pipe (Material : 307(CDS-21) + Labour :69 (CDS-19)) ---- Complete with all lead Mtr 456.99 456.99 60.0 False None None False None False 27419.4 0 2990526 99333 None 21.5.1 Laying of Cable in existing Trench/GI Pipe /Stone ware/RCC Hume pipe using wooden/Aluminium rollers as directed by the departmental staff…....2.5 to 25 Sqmm. ---- Complete with all lead Kms 25384.84 25384.84 0.15 False None None False None False 3807.726 0 2990527 99333 None 21.6.1 Laying of Cable in existing Trench/GI Pipe /Stone ware/RCC Hume pipe using wooden/Aluminium rollers as directed by the departmental staff…....35 to 95 Sqmm. ---- Complete with all lead Kms 37846.34 37846.34 0.2 False None None False None False 7569.268 0 2990528 99333 None BESCOM SR 2023-24 Supplying of Brass Cable Gland as per BESCOM specification (BESCOM SR Page:364)…….45 mm ---- Complete with all lead No 239.43 239.43 4.0 False None None False None False 957.72 0 2990529 99333 None ESCOM SR 2023-24 Sl.No.457 Item No.59.01 Supplying of Heavy Duty Copper Terminal Long Barrel (Lug) as per BESCOM specification (BESCOM SR Page : 362)……….50 Sqmm Copper Terminal, Apprx Wt: 26 Gm ---- Complete with all lead No 70.49 70.49 8.0 False None None False None False 563.92 0 2990530 99333 None ESCOM SR 2023-24 Sl.No.457 Item No.59.01 Supplying of Heavy Duty Copper Terminal Long Barrel (Lug) as per BESCOM specification (BESCOM SR Page : 362)……….95 Sqmm Copper Terminal, Apprx Wt: 58 Gm ---- Complete with all lead No 156.79 156.79 16.0 False None None False None False 2508.64 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1710159508000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1710159508000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1710159508000 1 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1710159555000 0 None None ELIGIBILITY The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders The departments shall not be responsible for non-accessibility of e Procurement portal due to internet connectivity issues and technical glitches at bidders end None 1710159562000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1710159569000 0 None None ELIGIBILITY Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder. None 1710159575000 0 None None ELIGIBILITY Conditional tenders will not be accepted None 1710159584000 0 None None ELIGIBILITY The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs. None 1710159592000 0 None None ELIGIBILITY The tender processing fees shall not be refundable. None 1710159620000 0 None None ELIGIBILITY Contractors Should be registered KPWD Class-2 above and civil contractor None 1710159630000 0 None None ELIGIBILITY Royalty on construction materials and other taxes will be deducted as per prevailing Govt. orders. None 1710159662000 0 None None ELIGIBILITY As per Karnataka state Government order LD/300/LET/2006 Bangalore dated 01.01.2007 and Government letter no PW/134/BMS/2007 dated 27.07.2007, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund. None 1710159672000 0 None None ELIGIBILITY All scanned documents to be uploaded shall be in original and the Executive Engineer reserves the right to verify the documents before approval. None 1710159679000 0 None None ELIGIBILITY The employer reserves the rights to Reject or accept any or all the tenders without assigning any reasons. None 1710159685000 0 None None ELIGIBILITY The intending contractors are requested to note that they should abide by the detailed instructions and conditions contained in the Standard Tender documents KW-4 K.P.W.D. and further orders thereon. None 1710159698000 0 None None ELIGIBILITY In the case of the death of the contractor after executing the agreement / commencement of the work, his legal heir, if is an eligible registered contractor and is willing can execute and compete the work at the accepted tender rates irrespective of the cost of the work None 1710159706000 0 None None ELIGIBILITY Contractor should carry out additional test required to test the suitability of materials. None 1710159714000 0 None None ELIGIBILITY All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent. None 1710159721000 0 None None ELIGIBILITY Formation levels and other data furnished are bare minimum the contractor should make all efforts to validate and to get additional data if required at his own cost None 1710159729000 0 None None ELIGIBILITY Materials like steel cement etc., required for the work shell be procured by the tenderer themselves and should get tested by the quality control authority before use on the work at their own cost. None 1710159736000 0 None None ELIGIBILITY The contractors assessed available tender capacity will be calculated as per the clause 3.6 of STD tender document Attached. None 1710159756000 0 None None ELIGIBILITY All precautions should be taken by the contractor so that there are no damages to such public/private properties None 1710159764000 0 None None ELIGIBILITY Contractor should take all precautions to ensure that no damage is caused to the existing canal CD works and other similar structures which have been constructed by other agencies during project execution. If any damage is caused, it has to be rectified at his own risk and cost. None 1710159772000 0 None None ELIGIBILITY Contractor should follow strictly the prevailing rules of labour act & The contractor should employ only registered labourers as per Govt. Circular No. PWD/198/BMS/2009/ Dated: 24-06-2009 None 1710159779000 0 None None ELIGIBILITY Contractor should adhere to HSE (Health safety environment) policy applicable for similar projects. Contractor to that extent should submit HSE document defining all the procedure including the policies before execution of the project. None 1710159788000 0 None None ELIGIBILITY Contractor should take all precautionary measures to ensure that no damages caused to the existing structures which have been constructed by other agencies during project execution If any damages caused it has to be rectified at his own risk & cost None 1710159800000 0 None None ELIGIBILITY The Defects Liability Period for this project shall be total 5 years (Five) (Initial 2 years DLP without any financial implications and subsequent 3 years DLP nominal maintenance should be carried out as per BOQ) None 1710159808000 0 None None ELIGIBILITY within 20 days of the letter of acceptance, the successful tenderers shall deliver to the Employer a Security deposit in any of the forms given below for an amount equivalent to 5% of the Contract price plus additional security for unbalanced tenders in accordance with Clause 25.5 of ITT and Clause 44 of the Conditions of Contract. None 1710159815000 0 None None ELIGIBILITY Further particulars, if any, required by the Contractor can be had from the office of the Executive Engineer, PWD Division, Kolar during office hours on all working days. None 1710159827000 0 None None ELIGIBILITY The Bankers certificate should be in prescribed format which is enclosed separately None 1710159834000 0 None None ELIGIBILITY The units specifications against the item codes in BOQ to be referred as per uni SR 2023-24 vol.1,2,3,5,6. The description in uni SR 2023-24 vol1,2,3,5,6 are final. None 1710159841000 0 None None ELIGIBILITY The contractor shall be solely responsible for the safety of their staff and the general public on the site and shall observe all the precautionary and safety measures through the execution of the work. None 1710159852000 0 None None ELIGIBILITY All Item Rates are inclusive of GST. Hence GST will not be paid separately None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Satisfactoriy completed (atleast 50%) as prime contractor at-least one such similar work of value not less than Rs.161.05 Lakhs (50% of estimated cost of tender) Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Executed in any one year the following minimum quantities of work ( Earthwork - 1171.77 Cum ,PCC/RCC- 653.07 Cum ,TMT Steel -56.51 MT, SSM/BBM/Solid Concrete blocks-1183.77 Sqm, Flooring-1185.60 Sqm ,Plastering-2901.54Sqm, Painting-4933.88 Sqm,etc) (80% of peak rate of construction) Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs.16.40Lakhs (not less than 50% of electrical works)any one year Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. 6.57 Lakhs (not less than 50% of electrical works) n any one year Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Owning the following key and critical equipment for this work (Concrete Mixer with weigh batch facility 2 No, Steel Centering & shuttering materials 500 Sqm, Hydraulic Excavators 1No, Tippers 2 No, Pin/plate/needle vibrator 2 No, Water tanker 1 No.) Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Own Equipments None None None None Construction equipment on lease or hire basis by the tenderer and equipment proposed to be deployed on this contract, if awarded (Concrete Mixer with weigh batch facility 2 No, Steel Centering & shuttering materials 500 Sqm, Tippers 2 No, Pin/plate/needle vibrator 2 No, Water tanker 1 No.) Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Lease/Hire Basis None None None None Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. 644.20 Lakhs) Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Liquid assets and /or availability of credit facilities of no less than Rs.87.84 Lakhs (estimated cash flow for 3 months of peak construction period) Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit None None None None Reports on the financial standing of the tenderer, such as profit and loss statements and auditors reports for the last five years Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Total value of civl engineering works executed and payments received in the last five years (year-wise) Others Not Required createdTs version createdDate modifiedDate documentName None None None None Others -- Not Required None None None None List of existing commitments and ongoing works Others B Value Certificate createdTs version createdDate modifiedDate documentName None None None None Others -- B Value Certificate None None None None List of works for which tenders already submitted Others Not Required createdTs version createdDate modifiedDate documentName None None None None Others -- Not Required None None None None Banker Details for reference Others Mobile No and E-mail ID createdTs version createdDate modifiedDate documentName None None None None Others -- Mobile No and E-mail ID None None None None Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded Others Not Required createdTs version createdDate modifiedDate documentName None None None None Others -- Not Required None None None None Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded Others Not Required createdTs version createdDate modifiedDate documentName None None None None Others -- Not Required None None None None List of Financial Resources with Certificates Others Not Required createdTs version createdDate modifiedDate documentName None None None None Others -- Not Required
tenderCriterionDocumentList	documentName optional documentTypeText PWD Registration Certificate True Technical Bid Annual turnover certificate issued by Chartered accountant with UDIN Number for past 5 years True Technical Bid Work done certificate issued by not below the rank of Executive Engineer True Technical Bid own & lease equipments True Technical Bid Line of credit True Technical Bid GST certificate True Technical Bid B value certificate True Technical Bid
tenderWorkLocationList	tenderSubEstimateName districtName taluqName loksabhaContName assemblyContName locationDescription latitudeDegrees latitudeMinutes latitudeSeconds longitudeDegrees longitudeMinutes longitudeSeconds Buildings Kolar Kolar Kolar KOLAR Kolar Taluk None None None None None None Buildings Kolar Kolar Kolar KOLAR Kolar Taluk None None None None None None
tenderAddress	createdTs 1710222634000 version 0 createdDate None modifiedDate None blockNumber O/o Executive Engineer PWD Division Kolar street None city Kolar state Karnataka pin 563101
tenderRecallDTO	None