createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1710227434864 version 12 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 5000.00 emd 380000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 26-03-2024 16:00:00 tenderQueryClose 21-03-2024 14:30:00 technicalBidOpen 27-03-2024 16:00:01 publishedDate 12-03-2024 15:28:26 publishedByPost EWHFWD_CE_CEOFF_BNG publishedByUser KPE16838 - BALEKATTE KUMARASWAMY PAVITHRA bidValidityPeriod 90 noOfCalls 2 preBidMeetingDate 22-03-2024 11:30:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn True percentageRateTypeText None contactPerson Technical Assistant. splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08029557023 mobileNumber 8884855376 tenderSupplierList None
tenderSchedule	createdTs 1710227434866 version 29 createdDate None modifiedDate None tenderNumber EWHFWD/2023-24/BD/WORK_INDENT96/CALL-2 title Up-gradation of infrastructure facilities to the TLH at Chikkodi in Belagavi District,2)Construction of STP works to CHC at Ankali in Chikkodi taluk, Belagavi District.3)Up-gradation of infrastructure facilities to the TLH at Ramdurga in Belagavi District.(Pkg-14/2023-24) description Up-gradation of infrastructure facilities to the TLH at Chikkodi in Belagavi District,2)Construction of STP works to CHC at Ankali in Chikkodi taluk, Belagavi District.3)Up-gradation of infrastructure facilities to the TLH at Ramdurga in Belagavi District.(Pkg-14/2023-24) category WORKS categoryText Works ecv 25229688.21 deptName Engineering Wing of Health and Family Welfare Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn False location 3521 locationName EWHFWD Chief Engineer Office Bengaluru provisionalAmount 25300000.0 groupOverheadTotal 0.0 fileNumber AEE/BGM/2023-24/01-133
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1710227435000 1 None None Buildings Up-gradation of infrastructure facilities to the TLH at Chikkodi in Belagavi District.(Slice-1) 12933298.21 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2998105 99860 None V-2 Item No 19.22.2 Dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of Engineer-in-charge25 mm and up to 40 mm ---- etc., complete with all lead Sqm 89.93 89.93 1262.086 False None None False None False 113499.39398 0 2998106 99860 None V-2 Item No 2.4.1 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 9340.1 9340.1 2.0 False None None False None False 18680.2 0 2998107 99860 None V-2 Item No 20.93 Cleaning Quadrangle chajjas including removing of dirt dust etc., using suitrable soap powder , coconut broomstick, squeezers / wipers/ rubber brushes, coir brushes, plastric brushjes, mugs, booster pumps with portable arrangement, hose pipe etc., compl ---- etc., complete with all lead Sqm 18.23 18.23 69.25 False None None False None False 1262.4275 0 2998108 99860 None V-2 Item No 8.1.1 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 309.92 309.92 1066.098 False None None False None False 330405.09216 0 2998109 99860 None V-2 Item No 9.12.2 Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm ---- etc., complete with all lead Sqm 1391.63 1391.63 200.965 False None None False None False 279668.92295 0 2998110 99860 None V-2 Item No 9.24 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. ---- etc., complete with all lead Sqm 3466.32 3466.32 104.82 False None None False None False 363339.6624 0 2998111 99860 None V-2 Item No 9.23 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : ** Flamed finish granite stone slab Black, Cat Eye, River Pink or equivalent. ---- etc., complete with all lead Sqm 2997.17 2997.17 30.72 False None None False None False 92073.0624 0 2998112 99860 None V-2 Item No 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. ---- etc., complete with all lead Sqm 1080.49 1080.49 166.075 False None None False None False 179442.37675 0 2998113 99860 None V-2 Item No 9.38 Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. ---- etc., complete with all lead Sqm 1691.83 1691.83 1066.098 False None None False None False 1803656.57934 0 2998114 99860 None V-2 Item No 20.47 Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge ---- etc., complete with all lead Each 365.83 365.83 5.0 False None None False None False 1829.15 0 2998115 99860 None V-2 Item No 8.57 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete as per specifications and as per directions of Engineer in charge. ---- etc., complete with all lead Sqm 15.8 15.8 3805.92 False None None False None False 60133.536 0 2998116 99860 None V-2 Item No 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge ---- etc., complete with all lead Sqm 450.91 450.91 175.0 False None None False None False 78909.25 0 2998117 99860 None V-2 Item No 8.63 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One coats on old work as per specifications and as per directions of Engineer in charge. ---- etc., complete with all lead Sqm 99.66 99.66 3805.92 False None None False None False 379297.9872 0 2998118 99860 None V-2 Item No 8.75.1 Finishing walls with Premium Acrylic Smooth exterior paint of required shade : Old work (Two coats applied @ 1.43 l/ 10 m²) over existing cement paint surface including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge ---- etc., complete with all lead Sqm 134.9 134.9 3000.95 False None None False None False 404828.155 0 2998119 99860 None V-2 Item No 12.11 Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. ---- etc., complete with all lead Cum 167815.13 167815.13 0.45 False None None False None False 75516.8085 0 2998120 99860 None V-2 Item No 12.57.5 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. 35 mm thick one side teak and one side commercial ---- etc., complete with all lead Sqm 4736.41 4736.41 12.6 False None None False None False 59678.766 0 2998121 99860 None V-2 Item No 12.83.2 Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance plus or minus 1mm), with wall thickness 2.0 mm (plus or minus 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (plus or minus 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge.42x50 mm PVC Extruded section ---- etc., complete with all lead m 290.48 290.48 69.3 False None None False None False 20130.264 0 2998122 99860 None V-2 Item No 12.55.1 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges. with both side prelam ---- etc., complete with all lead Sqm 2875.63 2875.63 22.05 False None None False None False 63407.6415 0 2998123 99860 None V-2 Item No 7.64.1.2 Providing and fixing sheet covering over expansion joints with iron screwsas per design.200 mm wide ---- etc., complete with all lead m 881.16 881.16 7.8 False None None False None False 6873.048 0 2998124 99860 None V-2 Item No 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ---- etc., complete with all lead No 1234.84 1234.84 5.0 False None None False None False 6174.2 0 2998125 99860 None V-2 Item No 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete with all lead Kg 686.7 686.7 34.5 False None None False None False 23691.15 0 2998126 99860 None V-2 Item No 12.69.2 12.69.20 Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc.125mm ---- etc., complete with all lead No 295.34 295.34 80.0 False None None False None False 23627.2 0 2998127 99860 None V-2 Item No 444 Providing and fixing Hold fasts ---- etc., complete with all lead No 60.76 60.76 85.0 False None None False None False 5164.6 0 2998128 99860 None V-2 Item No 12.62 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete ---- etc., complete with all lead No 288.04 288.04 40.0 False None None False None False 11521.6 0 2998129 99860 None V-2 Item No 12.58 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. ---- etc., complete with all lead No 145.84 145.84 5.0 False None None False None False 729.2 0 2998130 99860 None V-2 Item No 12.6 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. ---- etc., complete with all lead No 1278.6 1278.6 5.0 False None None False None False 6393.0 0 2998131 99860 None V-2 Item No 12.63 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete ---- etc., complete with all lead No 158.0 158.0 20.0 False None None False None False 3160.0 0 2998132 99860 None V-2 Item No 14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid ---- etc., complete with all lead Each 7264.44 7264.44 12.0 False None None False None False 87173.28 0 2998133 99860 None V-2 Item No 14.1.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests ---- etc., complete with all lead Each 5936.01 5936.01 13.0 False None None False None False 77168.13 0 2998134 99860 None V-2 Item No 14.7.8 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow including operated levers ---- etc., complete with all lead Each 4998.94 4998.94 15.0 False None None False None False 74984.1 0 2998135 99860 None V-2 Item No 14.22A Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer in-charge. ---- etc., complete with all lead Each 984.47 984.47 15.0 False None None False None False 14767.05 0 2998136 99860 None V-2 Item No 14.22B Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. ---- etc., complete with all lead Each 6760.05 6760.05 15.0 False None None False None False 101400.75 0 2998137 99860 None V-2 Item No 14.29 Providing and fixing 100 mm sand cast Iron grating for gully trap. ---- etc., complete with all lead Each 57.12 57.12 15.0 False None None False None False 856.8 0 2998138 99860 None 18-19 SR Item No 12.113.2 Providing and fixing Cl Nahani trap of approved make conforming to lSI specifications and construction of Cistern in M-15 as per directions (Rate is inclusive of cost of materials and fixtures and conveyance of materials to work spot).12.5mmx75mm ---- etc., complete with all lead Each 249.15 249.15 15.0 False None None False None False 3737.25 0 2998139 99860 None V-2 Item No 14.36.2 Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 g ---- etc., complete with all lead Each 113.03 113.03 15.0 False None None False None False 1695.45 0 2998140 99860 None V-5 Item No 10.1.7 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc.complete for: PVC pipes 110mm dia., 6 kg/sqcm & class 3 ---- etc., complete with all lead m 499.52 499.52 50.0 False None None False None False 24976.0 0 2998141 99860 None V-5 Item No 10.1.8 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc.complete for: PVC pipes 140mm dia., 6 kg/sqcm & class 3 ---- etc., complete with all lead m 709.79 709.79 30.0 False None None False None False 21293.7 0 2998142 99860 None V-2 Item No 13.32.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm dia ---- etc., complete with all lead m 375.55 375.55 50.0 False None None False None False 18777.5 0 2998143 99860 None V-2 Item No 13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm dia ---- etc., complete with all lead m 460.63 460.63 70.0 False None None False None False 32244.1 0 2998144 99860 None V-2 Item No 13.32.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm dia ---- etc., complete with all lead m 579.74 579.74 50.0 False None None False None False 28987.0 0 2998145 99860 None V-2 Item No 13.32.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 32mm dia ---- etc., complete with all lead m 676.97 676.97 40.0 False None None False None False 27078.8 0 2998146 99860 None V-2 Item No 19.43.1 Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes to the appropriate disposal area as per direction of Engineer-in-charge.15 mm to 40 mm nominal bore ---- etc., complete with all lead m 126.4 126.4 400.0 False None None False None False 50560.0 0 2998147 99860 None V-2 Item No 13.34 Providing and placing on terrace (at all floor levels) polyethylene water storage tank,IS:12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank. ---- etc., complete with all lead l 10.93 10.93 5000.0 False None None False None False 54650.0 0 2998148 99860 None V-5 Item No 16.9 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.. ---- etc., complete with all lead No 6628.79 6628.79 10.0 False None None False None False 66287.9 0 2998149 99860 None V-6 Item No 1.8.1 Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm .... etc. as required. 20 mm ---- etc., complete with all lead m 34.03 34.03 1250.0 False None None False None False 42537.5 0 2998150 99860 None V-6 Item No 1.8.2 Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm .... etc. as required. 25 mm ---- etc., complete with all lead m 42.53 42.53 1500.0 False None None False None False 63795.0 0 2998151 99860 None V-6 Item No 2.2.1 POINT WIRING USING COPPER WIRE WITHOUT SWITCH Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto 3 mts from tapping point to out let via switch box ---- etc., complete with all lead Point 326.94 326.94 40.0 False None None False None False 13077.6 0 2998152 99860 None V-6 Item No 2.2.2 POINT WIRING USING COPPER WIRE WITHOUT SWITCH Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3 mts upto 6mts from tapping point to outlet via switch box ---- etc., complete with all lead Point 460.63 460.63 45.0 False None None False None False 20728.35 0 2998153 99860 None V-6 Item No 2.2.3 POINT WIRING USING COPPER WIRE WITHOUT SWITCH Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6 mts upto 10 mts from tapping point to outlet via switch box ---- etc., complete with all lead Point 674.54 674.54 30.0 False None None False None False 20236.2 0 2998154 99860 None V-6 Item No 2.2.4 POINT WIRING USING COPPER WIRE WITHOUT SWITCH Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Two outlet in a row above 3mts upto 6 mts from tapping point to outlet via switches ---- etc., complete with all lead Point 822.82 822.82 2.0 False None None False None False 1645.64 0 2998155 99860 None V-6 Item No 2.2.5 POINT WIRING USING COPPER WIRE WITHOUT SWITCH Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Three outlet in a row above 6 mts upto 10 mts from the tapping point to outlet via switches ---- etc., complete with all lead Point 1202.03 1202.03 2.0 False None None False None False 2404.06 0 2998156 99860 None V-6 Item No 2.3.1 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 1 mm2 ---- etc., complete with all lead m 23.09 23.09 2800.0 False None None False None False 64652.0 0 2998157 99860 None V-6 Item No 2.3.2 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 1.5 mm2 ---- etc., complete with all lead m 31.6 31.6 2200.0 False None None False None False 69520.0 0 2998158 99860 None V-6 Item No 2.3.3 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 2.5 mm2 ---- etc., complete with all lead m 51.04 51.04 1600.0 False None None False None False 81664.0 0 2998159 99860 None V-6 Item No 2.3.4 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 4 mm2 ---- etc., complete with all lead m 76.57 76.57 400.0 False None None False None False 30628.0 0 2998160 99860 None V-6 Item No 2.3.5 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010 6 mm2 ---- etc., complete with all lead m 111.81 111.81 600.0 False None None False None False 67086.0 0 2998161 99860 None V-6 Item No 3.3.1 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 1-2 Way ---- etc., complete with all lead Each 125.18 125.18 12.0 False None None False None False 1502.16 0 2998162 99860 None V-6 Item No 3.3.2 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 3 Way ---- etc., complete with all lead Each 150.7 150.7 12.0 False None None False None False 1808.4 0 2998163 99860 None V-6 Item No 3.3.3 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 4-5 Way ---- etc., complete with all lead Each 166.5 166.5 10.0 False None None False None False 1665.0 0 2998164 99860 None V-6 Item No 3.3.4 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 6 Way ---- etc., complete with all lead Each 210.26 210.26 10.0 False None None False None False 2102.6 0 2998165 99860 None V-6 Item No 3.3.5 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 8 Way ---- etc., complete with all lead Each 266.17 266.17 10.0 False None None False None False 2661.7 0 2998166 99860 None V-6 Item No 3.3.6 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 10-12 Way ---- etc., complete with all lead Each 317.21 317.21 8.0 False None None False None False 2537.68 0 2998167 99860 None V-6 Item No 3.5.1 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal/PVC box 1 to 2Module ---- etc., complete with all lead Each 166.5 166.5 12.0 False None None False None False 1998.0 0 2998168 99860 None V-6 Item No 3.5.2 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal/PVC box 3Module ---- etc., complete with all lead Each 195.67 195.67 12.0 False None None False None False 2348.04 0 2998169 99860 None V-6 Item No 3.5.3 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal/PVC box 4 Module ---- etc., complete with all lead Each 212.69 212.69 10.0 False None None False None False 2126.9 0 2998170 99860 None V-6 Item No 3.5.4 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal/PVC box 6 Module ---- etc., complete with all lead Each 284.4 284.4 10.0 False None None False None False 2844.0 0 2998171 99860 None V-6 Item No 3.5.5 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal/PVC box 8 Module ---- etc., complete with all lead Each 345.17 345.17 10.0 False None None False None False 3451.7 0 2998172 99860 None V-6 Item No 3.5.6 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal/PVC box 10/12 Module ---- etc., complete with all lead Each 418.09 418.09 5.0 False None None False None False 2090.45 0 2998173 99860 None V-6 Item No 3.6.1 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6 amps one way switch ---- etc., complete with all lead Each 123.97 123.97 8.0 False None None False None False 991.76 0 2998174 99860 None V-6 Item No 3.6.2 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6 amps two way switch ---- etc., complete with all lead Each 201.75 201.75 8.0 False None None False None False 1614.0 0 2998175 99860 None V-6 Item No 3.6.3 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6 Amps 3 way sockets ---- etc., complete with all lead Each 207.83 207.83 12.0 False None None False None False 2493.96 0 2998176 99860 None V-6 Item No 3.6.4 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. stepped fan Regulator's Two module ---- etc., complete with all lead Each 433.89 433.89 10.0 False None None False None False 4338.9 0 2998177 99860 None V-6 Item No 3.6.10 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16 Amps universal sockets ---- etc., complete with all lead Each 286.83 286.83 12.0 False None None False None False 3441.96 0 2998178 99860 None V-6 Item No 3.6.7 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16 Amps one way Switch ---- etc., complete with all lead Each 218.77 218.77 6.0 False None None False None False 1312.62 0 2998179 99860 None V-6 Item No 3.6.11 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV/Telephone socket ---- etc., complete with all lead Each 189.6 189.6 1.0 False None None False None False 189.6 0 2998180 99860 None V-6 Item No 3.14.1 4 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board 6A SP Switch ---- etc., complete with all lead Each 66.84 66.84 12.0 False None None False None False 802.08 0 2998181 99860 None V-6 Item No 3.14.2 4 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board 6A Two Way Switch ---- etc., complete with all lead Each 85.07 85.07 15.0 False None None False None False 1276.05 0 2998182 99860 None V-6 Item No 3.14.3 4 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board 6A Three Way 5 Pin Socket ---- etc., complete with all lead Each 85.07 85.07 15.0 False None None False None False 1276.05 0 2998183 99860 None V-6 Item No 3.14.4 4 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board 6A Three Pin Top ---- etc., complete with all lead Each 105.73 105.73 12.0 False None None False None False 1268.76 0 2998184 99860 None V-6 Item No 3.14.5 4 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board 6A Bakelite Ceiling Rose ---- etc., complete with all lead Each 94.8 94.8 12.0 False None None False None False 1137.6 0 2998185 99860 None V-6 Item No 3.14.6 4 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board 6A Pendant Holder ---- etc., complete with all lead Each 86.29 86.29 12.0 False None None False None False 1035.48 0 2998186 99860 None V-6 Item No 3.14.7 4 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board 6A Batten Holder ---- etc., complete with all lead Each 89.93 89.93 2.0 False None None False None False 179.86 0 2998187 99860 None V-6 Item No 3.14.8 4 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board 6A Bell Push ---- etc., complete with all lead Each 85.07 85.07 10.0 False None None False None False 850.7 0 2998188 99860 None V-6 Item No 3.14.9 4 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board 6A Bell Buzzer ---- etc., complete with all lead Each 158.0 158.0 12.0 False None None False None False 1896.0 0 2998189 99860 None V-6 Item No 3.14.10 4 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board 16A SP Switch ---- etc., complete with all lead Each 159.21 159.21 4.0 False None None False None False 636.84 0 2998190 99860 None V-6 Item No 3.14.11 4 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board 16A Two Way Switch ---- etc., complete with all lead Each 177.44 177.44 12.0 False None None False None False 2129.28 0 2998191 99860 None V-6 Item No 3.14.12 4 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board 16A Three Way 5 Pin Socket ---- etc., complete with all lead Each 139.77 139.77 3.0 False None None False None False 419.31 0 2998192 99860 None V-6 Item No 3.14.13 4 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board 16A Three Pin Top ---- etc., complete with all lead Each 133.69 133.69 4.0 False None None False None False 534.76 0 2998193 99860 None V-6 Item No 3.14.14 4 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board 32A Bakelite DP ---- etc., complete with all lead Each 281.97 281.97 4.0 False None None False None False 1127.88 0 2998194 99860 None V-6 Item No 3.14.15 4 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board 16/6A combined plug and socket with control switch ---- etc., complete with all lead Each 264.95 264.95 3.0 False None None False None False 794.85 0 2998195 99860 None V-6 Item No 3.14.16 4 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board Electronic stepped regulator. ---- etc., complete with all lead Each 341.52 341.52 3.0 False None None False None False 1024.56 0 2998196 99860 None V-6 Item No 5.18.1 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A SP ---- etc., complete with all lead Each 504.39 504.39 10.0 False None None False None False 5043.9 0 2998197 99860 None V-6 Item No 5.18.2 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 40 A SP ---- etc., complete with all lead Each 963.81 963.81 10.0 False None None False None False 9638.1 0 2998198 99860 None V-6 Item No 5.18.3 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 50-63 A SP ---- etc., complete with all lead Each 985.68 985.68 10.0 False None None False None False 9856.8 0 2998199 99860 None V-6 Item No 5.18.4 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A DP ---- etc., complete with all lead Each 898.18 898.18 10.0 False None None False None False 8981.8 0 2998200 99860 None V-6 Item No 5.18.5 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 40 A DP ---- etc., complete with all lead Each 1288.32 1288.32 10.0 False None None False None False 12883.2 0 2998201 99860 None V-6 Item No 5.18.6 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 50-63 A DP ---- etc., complete with all lead Each 1339.37 1339.37 10.0 False None None False None False 13393.7 0 2998202 99860 None V-6 Item No 5.18.7 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 A TPN ---- etc., complete with all lead Each 2086.84 2086.84 10.0 False None None False None False 20868.4 0 2998203 99860 None V-6 Item No 5.18.8 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 40 A TPN ---- etc., complete with all lead Each 3699.67 3699.67 10.0 False None None False None False 36996.7 0 2998204 99860 None V-6 Item No 5.18.9 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 50-63 A TPN ---- etc., complete with all lead Each 3753.15 3753.15 10.0 False None None False None False 37531.5 0 2998205 99860 None V-6 Item No 5.19.1 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.I - Single Door 4 Way SP & N ---- etc., complete with all lead Each 1508.31 1508.31 4.0 False None None False None False 6033.24 0 2998206 99860 None V-6 Item No 5.19.2 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.I - Single Door 6 Way SP & N ---- etc., complete with all lead Each 1441.46 1441.46 4.0 False None None False None False 5765.84 0 2998207 99860 None V-6 Item No 5.19.3 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.I - Single Door 8 Way SP & N ---- etc., complete with all lead Each 1813.37 1813.37 4.0 False None None False None False 7253.48 0 2998208 99860 None V-6 Item No 5.19.4 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.I - Single Door 12 Way SP & N ---- etc., complete with all lead Each 2264.29 2264.29 4.0 False None None False None False 9057.16 0 2998209 99860 None V-6 Item No 5.19.5 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.I - Single Door 16 Way SP & N ---- etc., complete with all lead Each 3563.55 3563.55 4.0 False None None False None False 14254.2 0 2998210 99860 None V-6 Item No 5.46.1 Supplying and fixing of Modular MCB Devices (Tripper) With Breaking capacity of 6kA. 16 - 32 A SP ---- etc., complete with all lead Each 255.23 255.23 4.0 False None None False None False 1020.92 0 2998211 99860 None V-6 Item No 5.46.4 Supplying and fixing of Modular MCB Devices (Tripper) With Breaking capacity of 6kA. 16 - 32 A TP ---- etc., complete with all lead Each 974.75 974.75 4.0 False None None False None False 3899.0 0 2998212 99860 None V-6 Item No 5.32 Supplying and fixing digital frequency meter with latest micro controller technology, ultra bright 4 digit LED display, from 30-500V AC and optional or relay output for high/low frequency and wiring complete ---- etc., complete with all lead Each 1185.01 1185.01 4.0 False None None False None False 4740.04 0 2998213 99860 None V-6 Item No 11.3.1 Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI Greater than 80. Power Input: 220-240V@ 50/60Hz & Power factor Greater than0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 2' - 9/10 W ---- etc., complete with all lead Each 669.68 669.68 10.0 False None None False None False 6696.8 0 2998214 99860 None V-6 Item No 11.3.2 Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI Greater than 80. Power Input: 220-240V@ 50/60Hz & Power factor Greater than0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 4' - 20/22 W ---- etc., complete with all lead Each 838.62 838.62 10.0 False None None False None False 8386.2 0 2998215 99860 None V-6 Item No 6.3.1 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system.48" Sweep (1200 mm) Regular model ---- etc., complete with all lead Each 3626.75 3626.75 10.0 False None None False None False 36267.5 0 2998216 99860 None V-6 Item No 13.13 Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. ---- etc., complete with all lead Each 859.28 859.28 5.0 False None None False None False 4296.4 0 2998217 99860 None V-6 Item No 13.19 Fixing all types and all capacities of 1'x4' / 2'x2' LED Light fittings indoor on the wall / ceiling / rafters / girders with necessary supporting frame, using 2310.0076" twin twisted PVC insulated wires, required Nos of round blocks and clA. ---- etc., complete with all lead Each 595.54 595.54 25.0 False None None False None False 14888.5 0 2998218 99860 None V-2 Item No 19.22.2 Dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of Engineer-in-charge25 mm and up to 40 mm ---- etc., complete with all lead Sqm 90.83 90.83 78.311 False None None False None False 7112.98813 0 2998219 99860 None V-2 Item No 19.22.2 Dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of Engineer-in-charge25 mm and up to 40 mm ---- etc., complete with all lead Sqm 90.83 90.83 243.414 False None None False None False 22109.29362 0 2998220 99860 None V-2 Item No 15.1 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. ---- etc., complete with all lead Sqm 1002.91 1002.91 78.311 False None None False None False 78538.88501 0 2998221 99860 None V-2 Item No 2.4.1 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 9433.5 9433.5 3.0 False None None False None False 28300.5 0 2998222 99860 None V-2 Item No 20.93 Cleaning Quadrangle chajjas including removing of dirt dust etc., using suitrable soap powder , coconut broomstick, squeezers / wipers/ rubber brushes, coir brushes, plastric brushjes, mugs, booster pumps with portable arrangement, hose pipe etc., compl ---- etc., complete with all lead Sqm 18.41 18.41 120.15 False None None False None False 2211.9615 0 2998223 99860 None V-2 Item No 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. ---- etc., complete with all lead Sqm 1091.29 1091.29 78.311 False None None False None False 85460.01119 0 2998224 99860 None V-2 Item No 8.1.1 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 313.02 313.02 309.414 False None None False None False 96852.77028 0 2998225 99860 None V-2 Item No 9.38 Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. ---- etc., complete with all lead Sqm 1708.75 1708.75 309.414 False None None False None False 528711.1725 0 2998226 99860 None V-2 Item No 8.57 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete as per specifications and as per directions of Engineer in charge. ---- etc., complete with all lead Sqm 15.95 15.95 402.59 False None None False None False 6421.3105 0 2998227 99860 None V-2 Item No 8.63 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One coats on old work as per specifications and as per directions of Engineer in charge. ---- etc., complete with all lead Sqm 100.65 100.65 435.592 False None None False None False 43842.3348 0 2998228 99860 None V-2 Item No 14.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid ---- etc., complete with all lead Each 7337.09 7337.09 6.0 False None None False None False 44022.54 0 2998229 99860 None V-2 Item No 14.1.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests ---- etc., complete with all lead Each 5995.37 5995.37 5.0 False None None False None False 29976.85 0 2998230 99860 None V-2 Item No 14.7.8 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow including operated levers ---- etc., complete with all lead Each 5048.92 5048.92 11.0 False None None False None False 55538.12 0 2998231 99860 None V-2 Item No 14.22A Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer in-charge. ---- etc., complete with all lead Each 994.31 994.31 11.0 False None None False None False 10937.41 0 2998232 99860 None V-2 Item No 14.22B Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. ---- etc., complete with all lead Each 6827.65 6827.65 6.0 False None None False None False 40965.9 0 2998233 99860 None V-2 Item No 14.29 Providing and fixing 100 mm sand cast Iron grating for gully trap. ---- etc., complete with all lead Each 57.69 57.69 11.0 False None None False None False 634.59 0 2998234 99860 None 18-19 SR Item No 12.113.2 Providing and fixing Cl Nahani trap of approved make conforming to lSI specifications and construction of Cistern in M-15 as per directions (Rate is inclusive of cost of materials and fixtures and conveyance of materials to work spot).12.5mmx75mm ---- etc., complete with all lead Each 251.64 251.64 6.0 False None None False None False 1509.84 0 2998235 99860 None V-2 Item No 14.36.2 Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 g ---- etc., complete with all lead Each 114.16 114.16 6.0 False None None False None False 684.96 0 2998236 99860 None V-2 Item No 13.25 Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gms ---- etc., complete with all lead No 179.22 179.22 6.0 False None None False None False 1075.32 0 2998237 99860 None V-5 Item No 10.1.7 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc.complete for:PVC pipes 110mm dia., 6 kg/sqcm & class 3 ---- etc., complete with all lead m 504.52 504.52 25.0 False None None False None False 12613.0 0 2998238 99860 None V-5 Item No 10.1.8 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc.complete for:PVC pipes 140mm dia., 6 kg/sqcm & class 3 ---- etc., complete with all lead m 716.89 716.89 15.0 False None None False None False 10753.35 0 2998239 99860 None V-2 Item No 13.32.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.15 mm dia ---- etc., complete with all lead m 379.31 379.31 35.0 False None None False None False 13275.85 0 2998240 99860 None V-2 Item No 13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.20 mm dia ---- etc., complete with all lead m 465.24 465.24 30.0 False None None False None False 13957.2 0 2998241 99860 None V-2 Item No 13.32.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.25 mm dia ---- etc., complete with all lead m 585.54 585.54 30.0 False None None False None False 17566.2 0 2998242 99860 None V-2 Item No 13.32.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 32mm dia ---- etc., complete with all lead m 683.74 683.74 30.0 False None None False None False 20512.2 0 2998243 99860 None V-3 Item No 2.4 (A) Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness..By Manual MeansIn area of light jungle ---- etc., complete with all lead Sqm 1363.67 1363.67 0.8 False None None False None False 1090.936 0 2998244 99860 None V-1 Item No 1.12 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth ---- etc., complete with all lead Cum 115.46 115.46 24.0 False None None False None False 2771.04 0 2998245 99860 None V-1 Item No 1.15.3 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work .Depth exceeding 3m, but not exceeding 4.5m ---- etc., complete with all lead Cum 562.73 562.73 131.46 False None None False None False 73976.4858 0 2998246 99860 None V-1 Item No 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 12475.47 12475.47 36.9 False None None False None False 460344.843 0 2998247 99860 None V-1 Item No 2.11 (a) Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. for Building ---- etc., complete with all lead Tonne 108726.03 108726.03 4.509 False None None False None False 490245.66927 0 2998248 99860 None V-2 Item No 15.1 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. ---- etc., complete with all lead Sqm 992.98 992.98 112.98 False None None False None False 112186.8804 0 2998249 99860 None V-2 Item No 8.12 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineerin-Charge. ---- etc., complete with all lead Kg 77.78 77.78 35.0 False None None False None False 2722.3 0 2998250 99860 None V-2 Item No 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications ---- etc., complete with all lead Sqm 1592.17 1592.17 0.9 False None None False None False 1432.953 0 2998251 99860 None V-2 Item No 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 450.91 450.91 58.38 False None None False None False 26324.1258 0 2998252 99860 None V-2 Item No 8.3.1 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge ---- etc., complete with all lead Sqm 430.25 430.25 88.22 False None None False None False 37956.655 0 2998253 99860 None V-2 Item No 8.3 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 211.47 211.47 58.38 False None None False None False 12345.6186 0 2998254 99860 None Item No XXXVIII Providing and fixing C. I Manhole covers 24" x 24" ---- etc., complete with all lead No 3040.93 3040.93 2.0 False None None False None False 6081.86 0 2998255 99860 None V-2 Item No 11.16.3 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Electric resistance or induction butt welded tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete with all lead Kg 148.27 148.27 22.5 False None None False None False 3336.075 0 2998256 99860 None V-2 Item No 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete with all lead Kg 686.7 686.7 31.2 False None None False None False 21425.04 0 2998257 99860 None V-5 Item No 10.1.5 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. PVC pipes 75mm dia., 6 kg/sqcm & class 3 ---- etc., complete with all lead m 267.38 267.38 150.0 False None None False None False 40107.0 0 2998258 99860 None V-2 Item No 13.32.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15mm dia ---- etc., complete with all lead m 375.55 375.55 75.0 False None None False None False 28166.25 0 2998259 99860 None V-2 Item No 13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20mm dia ---- etc., complete with all lead m 460.63 460.63 50.0 False None None False None False 23031.5 0 2998260 99860 None V-2 Item No 13.32.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25mm dia ---- etc., complete with all lead m 579.74 579.74 100.0 False None None False None False 57974.0 0 2998261 99860 None V-2 Item No 13.32.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 32mm dia ---- etc., complete with all lead m 676.97 676.97 200.0 False None None False None False 135394.0 0 2998262 99860 None V-2 Item No 13.34 Providing and placing on terrace (at all floor levels) polyethylene water storage tank,IS:12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank. ---- etc., complete with all lead l 10.93 10.93 4000.0 False None None False None False 43720.0 0 2998263 99860 None V-5 Item No 16.9 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover. ---- etc., complete with all lead No 6628.79 6628.79 15.0 False None None False None False 99431.85 0 2998264 99860 None 160 BAR SCREEN CHAMBER: MSFRP Bar Screen chamber rectangular tank,made up of Mild steel coated with FRP lining,Bar Screen Chamber Diemesion:1000x1000x1000 Length :1000 mm,Width :1000 mm,Height :1000 mm,Mild steel sheet Thickness: 3mm,FRP Lining ,Internal Thickness : 2mm,External Thcness: 2mm,inlet nozzelDia :4 inch,outLetnozzel Dia: 4 Bar Screen Size : 10mm,screen MOC : Mild Steel,Screen coating : Epoxy,Make : Orionwater. ---- etc., complete with all lead Set 53100.0 53100.0 1.0 False None None False None False 53100.0 0 2998265 99860 None 161 RAW SEWAGE TRANSFER PUMP Raw Sewage transfer pump capable of handling,sewage transfer from collection tank to RBC STP,maximum solid handling size upto 50 mm,Type : Centrifugal monoblock,Impeller :open,motor HP:1,RPM:2700,Flow Rate:2 m3/hr,Head:10,Moc : Cl,solid Particle Size Handling: 7 mm A).Valve : Suction : 2 nos,Delivery : 2 nos,Size :50 mm,Moc : B).Type : Ball /Butterfly, Non Return Valve, Delivery : 2 nos, Size :50 mm, Moc : Make : Kriloskar / CRI, Pump (1 w + 1S) 2nos of pump = 1 set. ---- etc., complete with all lead Set 59000.0 59000.0 1.0 False None None False None False 59000.0 0 2998266 99860 None 162 STP Rectamgular Tank Size and dimension:Width : 1500 mm, Over Height including Top Cover : 3000 mm, Length :6100 mm, MOC of rectangular Tank : Mild Steel, Shell Thickness: 5 mm FRP lining, Internal Liniing : 3 mm, External Lining : 3 mm, Pipe inlet Dia: 80 mm, Pipe Outlet Dia: 80 mm, Drain Header pipe Dia: 80 mm ---- etc., complete with all lead Set 1046660.0 1046660.0 1.0 False None None False None False 1046660.0 0 2998267 99860 None 163 Primary clarifier : Type : Lamella, No of Plates: 10, Lamella plate MOC: FRP, Lemella Plate Thickness: 2 mm ---- etc., complete with all lead Set 457840.0 457840.0 1.0 False None None False None False 457840.0 0 2998268 99860 None 164 Secondary clarifier: Type : Lamella, No of Plates: 19, Lamella plate MOC: FRP, Lemella Plate Thickness: 3 mm ---- etc., complete with all lead Set 450760.0 450760.0 1.0 False None None False None False 450760.0 0 2998269 99860 None 165 ROTOR: No of Rotors: 2, Moc: FRP, Diameter of Rotor : 1000mm, Connected with , Shaft : EN 90 Rod, Driven by : pillar Block, No of pillar block: 4 ---- etc., complete with all lead Set 488520.0 488520.0 1.0 False None None False None False 488520.0 0 2998270 99860 None 166 Bio Zone (Rotor Placement Boat) No. of Biozone : 1 No, No. of Partisian inside Bio-zone : 4 Nos, MOC : MSFRP, Boat curvature Diameter : 1800mm, Bio Zone supporting with 150mm, Beam 2 Nos & 4 Nos. Legs., Boat Size:3350 mm ---- etc., complete with all lead Set 436600.0 436600.0 1.0 False None None False None False 436600.0 0 2998271 99860 None 167 Gear Box : Type: Helical, No of Gear Box: 1 no, Make : Bonfigoli (Germany), Gear Box Motor HP: 1, Gear Box motor Make : Seimens. ---- etc., complete with all lead Set 112100.0 112100.0 1.0 False None None False None False 112100.0 0 2998272 99860 None 168 Internal Piping & Base Works : 1) Inter connecting pipe works with FRP lining inside process tank, Recirculion& drain system. 2)Base Plate works for Gear box arrangement,Rotor Fixing arrangement,Biozone leg placement arrangement. RBC STP Make : Orionwater ---- etc., complete with all lead Set 68440.0 68440.0 1.0 False None None False None False 68440.0 0 2998273 99860 None 169 FILTER FEED PUMP: Filter feed pump capable of handling to transfer clarifed to filtration plant maximum solid handling size upto 20 mm, Type : Centrifugal monoblock, Impeller : Closed motor HP:3, RPM:1700, Flow Rate: 6m3/hr, Head:30, Moc : solid Particle Size Handling: 50mm Valve , Suction : 2 nos, Delivery : 2 nos, Size :50 mm, Moc : Type : Ball /Butterfly, Non Return Valve, Delivery : 2 nos, Size :50 mm, Moc : , Make : Kriloskar / CRI, Pump (1 w + 1S) 2nos of pump = 1 set ---- etc., complete with all lead Set 29500.0 29500.0 1.0 False None None False None False 29500.0 0 2998274 99860 None 170 SAND FILTER : Diameter: 600 mm, Height On Straight: 1900 mm, Shell hickness: 6mm, Dish end Thickness: 8mm, Frontal Pipeline:, MOC: Mild Steel, External Coating : Red Oxide and Enamel paint, Internal Coating: Black Bitumus, Fiter Media: Fine Sand, Gravel sand, pebbles,silex, Media in KG: 450, Media Depth : 915 mm, Type : Cylindrical, Vertical. ---- etc., complete with all lead Set 159300.0 159300.0 1.0 False None None False None False 159300.0 0 2998275 99860 None 171 ACTIVATED CARBON FILTER: Diameter: 600 mm,Height On Straight: 1900 mm, Shell hickness: 6mm,Dish end Thickness: 8mm Frontal Pipeline: MOC: Mild Steel,External Coating :Red Oxide and Enamel paint,Internal Coating: Black Bitumus,Fiter Media: Activated Carbon Media in KG: 150,Media Depth : 1000 mm,Type : Cylindrical. ---- etc., complete with all lead Set 159300.0 159300.0 1.0 False None None False None False 159300.0 0 2998276 99860 None 172 CHLORINE DOSING SYSTEM, Pump type : ElectonicDiaphram Capacity : 0- 2LPH, Nominal Back pressure : 6 KG/CM2, Maximum Back pressure: 8 KG/CM2 KW: 0.24 watt, Tank Capacity : 100 Liters, MOC: PP, Make : LMI Asia ---- etc., complete with all lead Set 33040.0 33040.0 1.0 False None None False None False 33040.0 0 2998277 99860 None 173 INTERCONNECTING PIPE WORK All necessary pipe work from Bar Screen chamber to collection tank, collection tank to Raw sewage transfer pump, Raw sewage transfer pump to RBC STP, RBC STP to Filter feed pump, Filter feed pump to Filtration plant and filtration plant to treated water tank The scope shall be PVC pipes with all necessary valves, NRV , Float switch and drain Header. ---- etc., complete with all lead Set 147500.0 147500.0 1.0 False None None False None False 147500.0 0 2998278 99860 None 174 CONTROL PANEL: Installation, testing and commissioning of Electrical Panel suitable for 415V, 3 phase, 4 wire, 50Hz distribution system. The panel shall be Wall Mounting type, sheet metal enclosed, flush front with aluminium busbars, separate earth bus shall be provided throughout the length of the panel. The incoming and the outgoing feeder breakers, switch fuse units, change over switches, indicating lamps, meters etc. shall be accommodated in a modular multi-tier arrangement. The painting shall be done in conformity with IS code. Adequate size cable alley shall be provided all around the panel and at the back for easy bending and terminations. The outgoing feeders inside the panel shall be connected through solid busbars. Busbars shall be provided with PVC heat shrinkable sleeves or heat resistant insulated paint. The panels shall be suitable for cable entry from top / bottom. ---- etc., complete with all lead Set 206500.0 206500.0 1.0 False None None False None False 206500.0 0 2998279 99860 None 175 FREIGHT LOADING AND UNLOADING : All the equipment shall be loaded ,transported and unloaded at site. Including the necessary Cranes required to erect and position the system ---- etc., complete with all lead Set 88500.0 88500.0 1.0 False None None False None False 88500.0 0 2998280 99860 None 176 INSTALLATION, ERECTION, COMMISSIONING, TESTING AND HANDING OVER AT SITE. From the Inlet of the Bar Screen chamber to the output of Caron filter ---- etc., complete with all lead Set 118000.0 118000.0 1.0 False None None False None False 118000.0 0 2998281 99860 None V-6 Item No 32.09 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 3.5 core 35 sqmm ---- etc., complete with all lead Km 187246.95 187246.95 0.1 False None None False None False 18724.695 0 2998282 99860 None SR 21-22 V-6 Item No BSR-31.06 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff. 35 sqmm to 95 sqmm ---- etc., complete with all lead Km 37846.34 37846.34 0.1 False None None False None False 3784.634 0 2998283 99860 None 19-20 SR Item No 6.11.3 Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only). 32mm dia ---- etc., complete with all lead Each 142.2 142.2 6.0 False None None False None False 853.2 0 2998284 99860 None SR 21-22 V-6 Item No BSR 49.05 Supplying and fixing of class A (medium duty) GI pipe of wall thick ness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV class. 50mm ---- etc., complete with all lead m 465.49 465.49 10.0 False None None False None False 4654.9 0 2998285 99860 None 19-20 SR Item No 6.17.8 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 35 sqmm Long Barrel ---- etc., complete with all lead Each 38.89 38.89 4.0 False None None False None False 155.56 0 2998286 99860 None SR 21-22 V-6 Item No BSR-29.03 Earth work excavation for cable trench of 0.5 to 0.75 M. Width and Depth upto 1 M including trial pits, depositing on bank upto a lead of 50 M,Supplying and Displaying necessary Danger Boards and Lighting, Using sightRails and Sign Boards at every 100 M wherever necessary as directed. In soil (hard) ---- etc., complete with all lead Cum 472.79 472.79 20.0 False None None False None False 9455.8 0 2998287 99860 None V-6 Item No 12.57 Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40mm dia 2.9mm thick 2.5 M long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm alround with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts. ---- etc., complete with all lead No 5172.74 5172.74 2.0 False None None False None False 10345.48 0 2998288 99860 None 19-20 SR Item No 6.18.3 Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc.,(75/23) 8 SWG-GI Wire ---- etc., complete with all lead m 23.09 23.09 50.0 False None None False None False 1154.5 0 2998289 99860 None V-6 Item No 12.58 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip ---- etc., complete with all lead m 99.66 99.66 25.0 False None None False None False 2491.5 0 1710227435000 0 None None Buildings Construction of STP works to CHC at Ankali in Chikkodi taluk, Belagavi District.(Slice-2) 2999806.44 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2998290 99861 None V-6 Item No 32.09 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 3.5 core 35 sqmm ---- etc., complete with all lead Km 190882.81 190882.81 0.1 False None None False None False 19088.281 0 2998291 99861 None SR 21-22 V-6 Item No BSR-31.06 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff. 35 sqmm to 95 sqmm ---- etc., complete with all lead Km 38581.22 38581.22 0.1 False None None False None False 3858.122 0 2998292 99861 None 19-20 SR Item No 6.11.3 Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only). 32mm dia ---- etc., complete with all lead Each 144.96 144.96 6.0 False None None False None False 869.76 0 2998293 99861 None SR 21-22 V-6 Item No BSR 49.05 Supplying and fixing of class A (medium duty) GI pipe of wall thick ness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV class. 50mm ---- etc., complete with all lead m 474.53 474.53 8.0 False None None False None False 3796.24 0 2998294 99861 None 19-20 SR Item No 6.17.8 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 35 sqmm Long Barrel ---- etc., complete with all lead Each 39.64 39.64 4.0 False None None False None False 158.56 0 2998295 99861 None SR 21-22 V-6 Item No BSR-29.03 Earth work excavation for cable trench of 0.5 to 0.75 M. Width and Depth upto 1 M including trial pits, depositing on bank upto a lead of 50 M,Supplying and Displaying necessary Danger Boards and Lighting, Using sightRails and Sign Boards at every 100 M wherever necessary as directed. In soil (hard) ---- etc., complete with all lead Cum 481.97 481.97 10.0 False None None False None False 4819.7 0 2998296 99861 None V-6 Item No 12.57 Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40mm dia 2.9mm thick 2.5 M long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm alround with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts. ---- etc., complete with all lead No 5273.18 5273.18 1.0 False None None False None False 5273.18 0 2998297 99861 None 19-20 SR Item No 6.18.3 Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc.,(75/23) 8 SWG-GI Wire ---- etc., complete with all lead m 23.54 23.54 20.0 False None None False None False 470.8 0 2998298 99861 None V-6 Item No 12.58 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip ---- etc., complete with all lead m 101.59 101.59 20.0 False None None False None False 2031.8 0 2998299 99861 None 010 BAR SCREEN CHAMBER: MSFRP Bar Screen chamber rectangular tank,made up of Mild steel coated with FRP lining,Bar Screen Chamber Diemesion:1000x1000x1000 Length :1000 mm,Width :1000 mm,Height :1000 mm,Mild steel sheet Thickness: 3mm,FRP Lining ,Internal Thickness : 2mm,External Thcness: 2mm,inlet nozzelDia :4 inch,outLetnozzel Dia: 4 Bar Screen Size : 10mm,screen MOC : Mild Steel,Screen coating : Epoxy,Make : Orionwater. ---- etc., complete with all lead Set 53100.0 53100.0 1.0 False None None False None False 53100.0 0 2998300 99861 None 011 RAW SEWAGE TRANSFER PUMP Raw Sewage transfer pump capable of handling,sewage transfer from collection tank to RBC STP,maximum solid handling size upto 50 mm,Type : Centrifugal monoblock,Impeller :open,motor HP:1,RPM:2700,Flow Rate:1 m3/hr,Head:10,Moc : Cl,solid Particle Size Handling: 7 mm A).Valve : Suction : 2 nos,Delivery : 2 nos,Size :50 mm,Moc : B).Type : Ball /Butterfly, Non Return Valve, Delivery : 2 nos, Size :50 mm, Moc : Make : Kriloskar / CRI, Pump (1 w + 1S) 2nos of pump = 1 set. ---- etc., complete with all lead Set 59000.0 59000.0 1.0 False None None False None False 59000.0 0 2998301 99861 None 012 STP Rectamgular Tank Size and dimension:Width : 1500 mm, Over Height including Top Cover : 3000 mm, Length :5350 mm, MOC of rectangular Tank : Mild Steel, Shell Thickness: 5 mm FRP lining, Internal Liniing : 3 mm, External Lining : 3 mm, Pipe inlet Dia: 80 mm, Pipe Outlet Dia: 80 mm, Drain Header pipe Dia: 80 mm ---- etc., complete with all lead Set 888540.0 888540.0 1.0 False None None False None False 888540.0 0 2998302 99861 None 013 Primary clarifier : Type : Lamella, No of Plates: 10, Lamella plate MOC: FRP, Lemella Plate Thickness: 2 mm ---- etc., complete with all lead Set 398840.0 398840.0 1.0 False None None False None False 398840.0 0 2998303 99861 None 014 Secondary clarifier: Type : Lamella, No of Plates: 19, Lamella plate MOC: FRP, Lemella Plate Thickness: 3 mm ---- etc., complete with all lead Set 391760.0 391760.0 1.0 False None None False None False 391760.0 0 2998304 99861 None 015 ROTOR: No of Rotors: 2, Moc: FRP, Diameter of Rotor : 1000mm, Connected with , Shaft : EN 90 Rod, Driven by : pillar Block, No of pillar block: 4 ---- etc., complete with all lead Set 252520.0 252520.0 1.0 False None None False None False 252520.0 0 2998305 99861 None 016 Gear Box : Type: Helical, No of Gear Box: 1 no, Make : Bonfigoli (Germany), Gear Box Motor HP: 1, Gear Box motor Make : Seimens. ---- etc., complete with all lead Set 112100.0 112100.0 1.0 False None None False None False 112100.0 0 2998306 99861 None 017 Internal Piping & Base Works : 1) Inter connecting pipe works with FRP lining inside process tank, Recirculion& drain system. 2)Base Plate works for Gear box arrangement,Rotor Fixing arrangement,Biozone leg placement arrangement. RBC STP Make : Orionwater ---- etc., complete with all lead Set 68440.0 68440.0 1.0 False None None False None False 68440.0 0 2998307 99861 None 018 FILTER FEED PUMP: Filter feed pump capable of handling to transfer clarifed to filtration plant maximum solid handling size upto 20 mm, Type : Centrifugal monoblock, Impeller : Closed motor HP:3, RPM:1700, Flow Rate: 6m3/hr, Head:30, Moc : solid Particle Size Handling: 50mm Valve , Suction : 2 nos, Delivery : 2 nos, Size :50 mm, Moc : Type : Ball /Butterfly, Non Return Valve, Delivery : 2 nos, Size :50 mm, Moc : , Make : Kriloskar / CRI, Pump (1 w + 1S) 2nos of pump = 1 set ---- etc., complete with all lead Set 29500.0 29500.0 1.0 False None None False None False 29500.0 0 2998308 99861 None 019 SAND FILTER : Diameter: 600 mm, Height On Straight: 1900 mm, Shell hickness: 6mm, Dish end Thickness: 8mm, Frontal Pipeline:, MOC: Mild Steel, External Coating : Red Oxide and Enamel paint, Internal Coating: Black Bitumus, Fiter Media: Fine Sand, Gravel sand, pebbles,silex, Media in KG: 450, Media Depth : 915 mm, Type : Cylindrical, Vertical. ---- etc., complete with all lead Set 123900.0 123900.0 1.0 False None None False None False 123900.0 0 2998309 99861 None 020 ACTIVATED CARBON FILTER: Diameter: 600 mm,Height On Straight: 1900 mm, Shell hickness: 6mm,Dish end Thickness: 8mm Frontal Pipeline: MOC: Mild Steel,External Coating :Red Oxide and Enamel paint,Internal Coating: Black Bitumus,Fiter Media: Activated Carbon Media in KG: 150,Media Depth : 1000 mm,Type : Cylindrical. ---- etc., complete with all lead Set 123900.0 123900.0 1.0 False None None False None False 123900.0 0 2998310 99861 None 021 CHLORINE DOSING SYSTEM, Pump type : ElectonicDiaphram Capacity : 0- 2LPH, Nominal Back pressure : 6 KG/CM2, Maximum Back pressure: 8 KG/CM2 KW: 0.24 watt, Tank Capacity : 100 Liters, MOC: PP, Make : LMI Asia ---- etc., complete with all lead Set 33040.0 33040.0 1.0 False None None False None False 33040.0 0 2998311 99861 None 022 INTERCONNECTING PIPE WORK All necessary pipe work from Bar Screen chamber to collection tank, collection tank to Raw sewage transfer pump, Raw sewage transfer pump to RBC STP, RBC STP to Filter feed pump, Filter feed pump to Filtration plant and filtration plant to treated water tank The scope shall be PVC pipes with all necessary valves, NRV , Float switch and drain Header. ---- etc., complete with all lead Set 118000.0 118000.0 1.0 False None None False None False 118000.0 0 2998312 99861 None 023 CONTROL PANEL: Installation, testing and commissioning of Electrical Panel suitable for 415V, 3 phase, 4 wire, 50Hz distribution system. The panel shall be Wall Mounting type, sheet metal enclosed, flush front with aluminium busbars, separate earth bus shall be provided throughout the length of the panel. The incoming and the outgoing feeder breakers, switch fuse units, change over switches, indicating lamps, meters etc. shall be accommodated in a modular multi-tier arrangement. The painting shall be done in conformity with IS code. Adequate size cable alley shall be provided all around the panel and at the back for easy bending and terminations. The outgoing feeders inside the panel shall be connected through solid busbars. Busbars shall be provided with PVC heat shrinkable sleeves or heat resistant insulated paint. The panels shall be suitable for cable entry from top / bottom. ---- etc., complete with all lead Set 147500.0 147500.0 1.0 False None None False None False 147500.0 0 2998313 99861 None 024 FREIGHT LOADING AND UNLOADING : All the equipment shall be loaded ,transported and unloaded at site. Including the necessary Cranes required to erect and position the system ---- etc., complete with all lead Set 70800.0 70800.0 1.0 False None None False None False 70800.0 0 2998314 99861 None 025 INSTALLATION, ERECTION, COMMISSIONING, TESTING AND HANDING OVER AT SITE. From the Inlet of the Bar Screen chamber to the output of Caron filter ---- etc., complete with all lead Set 88500.0 88500.0 1.0 False None None False None False 88500.0 0 1710227435000 1 None None Buildings Up-gradation of infrastructure facilities to the TLH at Ramdurga in Belagavi District.(Slice-3) 9296583.56 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2998315 99862 None CSR2023-24 V-1 Page No 37 Item No 1.14.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m ---- etc., complete with all lead Cum 126.37 126.37 207.5 False None None False None False 26221.775 0 2998316 99862 None CSR2023-24 V-1 Page No 34 Item No 1.9 Filling available excavated earth (excluding rock)in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm indepth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- etc., complete with all lead Cum 329.57 329.57 488.0 False None None False None False 160830.16 0 2998317 99862 None CSR2023-24 V-2 Page No 14 Item No 6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. ---- etc., complete with all lead Cum 9873.59 9873.59 25.0 False None None False None False 246839.75 0 2998318 99862 None CSR2023-24 V-1 Page No 15 Item No 2.1.4 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators,including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 7702.86 7702.86 63.0111 False None None False None False 485365.681746 0 2998319 99862 None CSR2023-24 V-2 Page No 104 Item No 12.53 Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat moulded PVC C channel of 5mm thick sheet & 30 x 50mm wide to form stiles & 5mm thick & 75mm wide PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick 20mm wide PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet fitted in the M.S. Frame, Sealed to the stiles & rails with 5x30mm PVC sheet beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 No of 75 mm Aluminium hinges. ---- etc., complete with all lead Sqm 1967.53 1967.53 15.75 False None None False None False 30988.5975 0 2998320 99862 None CSR2023-24 V-2 Page No 105 Item No 12.57.5 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.-do- 35 mm thick one side teak and one side commercial ---- etc., complete with all lead Sqm 4828.38 4828.38 20.16 False None None False None False 97340.1408 0 2998321 99862 None CSR2023-24 V-2 Page No 77 Item No 11.5.1 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in- Charge. ---- etc., complete with all lead Sqm 5548.24 5548.24 3.96 False None None False None False 21971.0304 0 2998322 99862 None CSR2023-24 V-2 Page No 197 Item No 20.3.1 Float glass panes of nominal thickness 4 mm (weight not less than 10kg/m²) ---- etc., complete with all lead Sqm 1803.98 1803.98 22.0 False None None False None False 39687.56 0 2998323 99862 None CSR2023-24 V-2 Page No 105 Item No 12.6 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. ---- etc., complete with all lead No 1303.42 1303.42 10.0 False None None False None False 13034.2 0 2998324 99862 None CSR2023-24 V-2 Page No 105 Item No 12.59 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on thebody, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. ---- etc., complete with all lead No 1380.24 1380.24 3.0 False None None False None False 4140.72 0 2998325 99862 None CSR2023-24 V-2 Page No 207 Item No 20.96 Cleaning of office floors, toilet floors, corridors, lobbies, partitions, storage units, furnitures,electrical & electronic equipments, doors, windows, curtains, blinds etc., including cleaning of dust, etc., using suitable bombay broom stick, squezers ---- etc., complete with all lead Sqm 3.71 3.71 1600.0 False None None False None False 5936.0 0 2998326 99862 None CSR2023-24 V-2 Page No 206 Item No 20.91 External sweeping and terrace cleaning - Cleaning of outer periphery like roads footpaths curb stones terrace including removing grass dust etc., to the nearest garbage pit using suitable coconut broomstic,bombay broomstick, squezers /wipers /rubberbru ---- etc., complete with all lead Sqm 1.23 1.23 1800.0 False None None False None False 2214.0 0 2998327 99862 None CSR2023-24 V-2 Page No 188 Item No 19.13.1 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking to the appropriate disposal area as per direction of Engineer-in-charge.Of area beyond 3 m² ---- etc., complete with all lead Sqm 116.46 116.46 35.0 False None None False None False 4076.1 0 2998328 99862 None CSR2023-24 V-5 Page No 113 Item No 10.1.3 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 50mm dia., 6 kg/sqcm & class 5 ---- etc., complete with all lead m 125.13 125.13 200.0 False None None False None False 25026.0 0 2998329 99862 None CSR2023-24 V-5 Page No 113 Item No 10.1.5 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 75mm dia., 6 kg/sqcm & class 3 ---- etc., complete with all lead m 272.58 272.58 210.0 False None None False None False 57241.8 0 2998330 99862 None CSR2023-24 V-5 Page No 113 Item No 10.1.7 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 110mm dia., 6 kg/sqcm & class 3 ---- etc., complete with all lead m 509.23 509.23 372.33 False None None False None False 189601.6059 0 2998331 99862 None CSR2023-24 V-5 Page No 113 Item No 10.1.8 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 140mm dia., 6 kg/sqcm & class 3 ---- etc., complete with all lead m 723.58 723.58 524.0 False None None False None False 379155.92 0 2998332 99862 None CSR2023-24 V-2 Page No 122 Item No 13.32.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15mm dia ---- etc., complete with all lead m 382.85 382.85 115.0 False None None False None False 44027.75 0 2998333 99862 None CSR2023-24 V-2 Page No 122 Item No 13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20mm dia ---- etc., complete with all lead m 469.58 469.58 180.0 False None None False None False 84524.4 0 2998334 99862 None CSR2023-24 V-2 Page No 112 Item No 13.32.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25mm dia ---- etc., complete with all lead m 591.0 591.0 210.0 False None None False None False 124110.0 0 2998335 99862 None CSR2023-24 V-2 Page No 136 Item No 14.29 Providing and fixing 100 mm sand cast Iron grating for gully trap. ---- etc., complete with all lead Each 58.23 58.23 10.0 False None None False None False 582.3 0 2998336 99862 None CSR2023-24 V-2 Page No 131 Item No 14.1.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests ---- etc., complete with all lead Each 6051.27 6051.27 5.0 False None None False None False 30256.35 0 2998337 99862 None CSR2023-24 V-2 Page No 131 Item No 14.3 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : ---- etc., complete with all lead Each 7430.28 7430.28 4.0 False None None False None False 29721.12 0 2998338 99862 None CSR2023-24 V-2 Page No 132 Item No 14.7.5 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Angle back wash basin size 600 x 480 mm with single 15mm C.P. brass pillar tap ---- etc., complete with all lead Each 3173.07 3173.07 5.0 False None None False None False 15865.35 0 2998339 99862 None CSR2023-24 V-2 Page No 134 Item No 14.11.2 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required :Size 600x450x200 mm ---- etc., complete with all lead Each 6296.59 6296.59 5.0 False None None False None False 31482.95 0 2998340 99862 None CSR2023-24 V-2 Page No A-33 Item No 496 Rectangular shape 453x357 mm Mirror with Plastic moulded frame ---- etc., complete with all lead Each 359.31 359.31 5.0 False None None False None False 1796.55 0 2998341 99862 None CSR2023-24 V-2 Page No 137 Item No 14.40.2 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. ---- etc., complete with all lead Each 614.54 614.54 6.0 False None None False None False 3687.24 0 2998342 99862 None CSR2023-24 V-2 Page No 119 Item No 13.15 13.15 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. ---- etc., complete with all lead No 898.27 898.27 12.0 False None None False None False 10779.24 0 2998343 99862 None CSR2023-24 V-2 Page No 117 Item No 13.4.1 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :(25 mm nominal bore) ---- etc., complete with all lead No 680.21 680.21 6.0 False None None False None False 4081.26 0 2998344 99862 None CSR2023-24 V-2 Page No 117 Item No 13.4.2 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :(32 mm nominal bore) ---- etc., complete with all lead No 740.92 740.92 4.0 False None None False None False 2963.68 0 2998345 99862 None CSR2023-24 V-2 Page No 117 Item No 13.5.2 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :20 mm nominal bore ---- etc., complete with all lead No 389.04 389.04 6.0 False None None False None False 2334.24 0 2998346 99862 None CSR2023-24 V-2 Page No 119 Item No 13.12 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 ---- etc., complete with all lead No 786.76 786.76 4.0 False None None False None False 3147.04 0 2998347 99862 None CSR2023-24 V-1 Page No 5 Item No 1.1 Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m. Including cost of all labour complete as per specifications ---- etc., complete with all lead Cum 198.24 198.24 95.0 False None None False None False 18832.8 0 2998348 99862 None CSR2023-24 V-6 Page No 2 Item No 1.1.1 Supplying heavy gauge PVC conduit pipe.......dia.......mm thick confirming to IS2509 with suitable size bends,junctionboxes,adhesivepaste etc,and fixing using inverted wood plugs incase of RCCceiling andRCC wall/stonestructure or rawl plugs incase of brick wallsandcement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws.20 mm dia ---- etc., complete with all lead m 85.49 85.49 100.0 False None None False None False 8549.0 0 2998349 99862 None CSR2023-24 V-6 Page No 2 Item No 1.1.2 Supplying heavy gauge PVC conduit pipe.......dia.......mm thick confirming to IS2509 with suitable size bends,junctionboxes,adhesivepaste etc,and fixing using inverted wood plugs incase of RCCceiling andRCC wall/stonestructure or rawl plugs incase of brick wallsandcement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws.25 mm dia ---- etc., complete with all lead m 96.31 96.31 120.0 False None None False None False 11557.2 0 2998350 99862 None CSR2023-24 V-6 Page No 2 Item No 1.1.3 SSupplying heavy gauge PVC conduit pipe.......dia.......mm thick confirming to IS2509 with suitable size bends,junctionboxes,adhesivepaste etc,and fixing using inverted wood plugs incase of RCCceiling andRCC wall/stonestructure or rawl plugs incase of brick wallsandcement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws.32 mm dia ---- etc., complete with all lead m 126.03 126.03 100.0 False None None False None False 12603.0 0 2998351 99862 None CSR2023-24 V-6 Page No 2 Item No 1.3.1 Supplying 2 mm thick heavy gauge PVC conduit pipe with bends metal junction boxes adhesives paste etc and bracing U or J hooks and cement plastering upto the surface of the trick level and run with 18 SWG Gi fish wire run through out the conduit wherever necessary 20 mm dia ---- etc., complete with all lead m 80.85 80.85 100.0 False None None False None False 8085.0 0 2998352 99862 None CSR2023-24 V-6 Page No 2 Item No 1.3.2 Supplying 2 mm thick heavy gauge PVC conduit pipe with bends metal junction boxes adhesives paste etc and bracing U or J hooks and cement plastering upto the surface of the trick level and run with 18 SWG Gi fish wire run through out the conduit wherever necessary 25 mm dia ---- etc., complete with all lead m 93.93 93.93 150.0 False None None False None False 14089.5 0 2998353 99862 None CSR2023-24 V-6 Page No 2 Item No 1.3.3 Supplying 2 mm thick heavy gauge PVC conduit pipe with bends metal junction boxes adhesives paste etc and bracing U or J hooks and cement plastering upto the surface of the trick level and run with 18 SWG Gi fish wire run through out the conduit wherever necessary 32 mm dia ---- etc., complete with all lead m 117.71 117.71 120.0 False None None False None False 14125.2 0 2998354 99862 None CSR2023-24 V-6 Page No 2 Item No 1.4.1 Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 75 x 75 x 65 mm ---- etc., complete with all lead Each 126.03 126.03 20.0 False None None False None False 2520.6 0 2998355 99862 None CSR2023-24 V-6 Page No 2 Item No 1.4.2 Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.100 x 75 x 65 mm ---- etc., complete with all lead Each 140.03 140.03 15.0 False None None False None False 2100.45 0 2998356 99862 None CSR2023-24 V-6 Page No 2 Item No 1.5.1 Supplying and fixing PVC/metal conduit Deep junction box 19/20mm deep junction box ---- etc., complete with all lead Each 58.26 58.26 39.0 False None None False None False 2272.14 0 2998357 99862 None CSR2023-24 V-6 Page No 3 Item No 1.5.2 Supplying and fixing PVC/metal conduit Deep junction box 25mm deep junction box ---- etc., complete with all lead Each 66.58 66.58 20.0 False None None False None False 1331.6 0 2998358 99862 None CSR2023-24 V-6 Page No 4 Item No 1.11 Supplying And Fixing "S" Hook made out of 14 mm dia M.S. Rod. ---- etc., complete with all lead Each 61.83 61.83 15.0 False None None False None False 927.45 0 2998359 99862 None CSR2023-24 V-6 Page No 4 Item No 1.12 Supplying And Fixing M.S. Rafter Clamp Set made out of M.S. Flat & 14 mm M.S. rod ---- etc., complete with all lead Each 190.24 190.24 15.0 False None None False None False 2853.6 0 2998360 99862 None CSR2023-24 V-6 Page No 4 Item No 1.13 Supplying And Fixing Metal Fan Box with Round Hook ---- etc., complete with all lead Each 139.11 139.11 15.0 False None None False None False 2086.65 0 2998361 99862 None CSR2023-24 V-6 Page No 5 Item No 2.2.1 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm 2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet Short point upto 3 mts from tapping point to out let via switch ---- etc., complete with all lead Point 319.84 319.84 55.0 False None None False None False 17591.2 0 2998362 99862 None CSR2023-24 V-6 Page No 5 Item No 2.2.2 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm 2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet Medium point above 3 mts upto 6mts from tapping point to outlet via switch ---- etc., complete with all lead Point 450.63 450.63 55.0 False None None False None False 24784.65 0 2998363 99862 None CSR2023-24 V-6 Page No 5 Item No 2.2.3 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm 2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet Long point above 6 mts upto 10 mts from tapping point to outlet via switch ---- etc., complete with all lead Point 659.9 659.9 40.0 False None None False None False 26396.0 0 2998364 99862 None CSR2023-24 V-6 Page No 5 Item No 2.2.4 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm 2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet Two outlet in a row above 3mts upto 6 mts from tapping point to outlet via switches ---- etc., complete with all lead Point 804.95 804.95 30.0 False None None False None False 24148.5 0 2998365 99862 None CSR2023-24 V-6 Page No 5 Item No 2.2.5 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm 2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6A flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet Three outlet in a row above 6 mts upto 10 mts from the tapping point to outlet via switches ---- etc., complete with all lead Point 1175.92 1175.92 30.0 False None None False None False 35277.6 0 2998366 99862 None CSR2023-24 V-6 Page No 5 Item No 2.3.1 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments 1mm ---- etc., complete with all lead m 22.59 22.59 500.0 False None None False None False 11295.0 0 2998367 99862 None CSR2023-24 V-6 Page No 5 Item No 2.3.2 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments 1.5mm ---- etc., complete with all lead m 30.91 30.91 600.0 False None None False None False 18546.0 0 2998368 99862 None CSR2023-24 V-6 Page No 5 Item No 2.3.3 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments 2.5mm ---- etc., complete with all lead m 49.94 49.94 500.0 False None None False None False 24970.0 0 2998369 99862 None CSR2023-24 V-6 Page No 5 Item No 2.3.4 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments 4mm ---- etc., complete with all lead m 74.91 74.91 200.0 False None None False None False 14982.0 0 2998370 99862 None CSR2023-24 V-6 Page No 5 Item No 2.3.5 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments 6mm ---- etc., complete with all lead m 109.39 109.39 200.0 False None None False None False 21878.0 0 2998371 99862 None CSR2023-24 V-6 Page No 7 Item No 2.6.4 Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to13:8130-1984 and virgin grade PVC insulation and powder coating extruded PVC sheathed suitable for working voltage upto 1100 V as per IS-694:2010. 3C x 10 mm2 ---- etc., complete with all lead m 491.06 491.06 90.0 False None None False None False 44195.4 0 2998372 99862 None CSR2023-24 V-6 Page No 8 Item No 3.4.1 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1 - 2Way ---- etc., complete with all lead Each 164.08 164.08 45.0 False None None False None False 7383.6 0 2998373 99862 None CSR2023-24 V-6 Page No 8 Item No 3.4.3 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4 - 5Way ---- etc., complete with all lead Each 210.45 210.45 75.0 False None None False None False 15783.75 0 2998374 99862 None CSR2023-24 V-6 Page No 8 Item No 3.4.4 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6 Way ---- etc., complete with all lead Each 261.58 261.58 50.0 False None None False None False 13079.0 0 2998375 99862 None CSR2023-24 V-6 Page No 8 Item No 3.4.5 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8 Way ---- etc., complete with all lead Each 310.33 310.33 40.0 False None None False None False 12413.2 0 2998376 99862 None CSR2023-24 V-6 Page No 8 Item No 3.4.6 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10 / 12 Way ---- etc., complete with all lead Each 379.29 379.29 40.0 False None None False None False 15171.6 0 2998377 99862 None CSR2023-24 V-6 Page No 8 Item No 3.5.1 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required No of machine screws , bolts nuts etc,.complete on the existing metal box 1 to 2Module ---- etc., complete with all lead Each 162.89 162.89 30.0 False None None False None False 4886.7 0 2998378 99862 None CSR2023-24 V-6 Page No 8 Item No 3.5.3 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required No of machine screws , bolts nuts etc,.complete on the existing metal box 4 Module ---- etc., complete with all lead Each 208.08 208.08 30.0 False None None False None False 6242.4 0 2998379 99862 None CSR2023-24 V-6 Page No 8 Item No 3.5.4 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required No of machine screws , bolts nuts etc,.complete on the existing metal box 6 Module ---- etc., complete with all lead Each 278.23 278.23 15.0 False None None False None False 4173.45 0 2998380 99862 None CSR2023-24 V-6 Page No 8 Item No 3.5.5 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required No of machine screws , bolts nuts etc,.complete on the existing metal box 8 Module ---- etc., complete with all lead Each 337.68 337.68 15.0 False None None False None False 5065.2 0 2998381 99862 None CSR2023-24 V-6 Page No 8 Item No 3.5.6 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required No of machine screws , bolts nuts etc,.complete on the existing metal box 10/12 Module ---- etc., complete with all lead Each 409.02 409.02 15.0 False None None False None False 6135.3 0 2998382 99862 None CSR2023-24 V-6 Page No 9 Item No 3.6.1 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6 amps one way switch ---- etc., complete with all lead Each 121.28 121.28 30.0 False None None False None False 3638.4 0 2998383 99862 None CSR2023-24 V-6 Page No 9 Item No 3.6.2 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6 amps two way switch ---- etc., complete with all lead Each 197.37 197.37 50.0 False None None False None False 9868.5 0 2998384 99862 None CSR2023-24 V-6 Page No 9 Item No 3.6.3 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6 Amps 3 way sockets ---- etc., complete with all lead Each 203.32 203.32 30.0 False None None False None False 6099.6 0 2998385 99862 None CSR2023-24 V-6 Page No 9 Item No 3.6.4 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. stepped fan Regulator's ---- etc., complete with all lead Each 424.47 424.47 15.0 False None None False None False 6367.05 0 2998386 99862 None CSR2023-24 V-6 Page No 9 Item No 3.6.10 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16 Amps universal sockets ---- etc., complete with all lead Each 280.6 280.6 15.0 False None None False None False 4209.0 0 2998387 99862 None CSR2023-24 V-6 Page No 9 Item No 3.6.7 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16 Amps one way Switch ---- etc., complete with all lead Each 214.02 214.02 10.0 False None None False None False 2140.2 0 2998388 99862 None CSR2023-24 V-6 Page No 9 Item No 3.6.11 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV/Telephone socket ---- etc., complete with all lead Each 185.48 185.48 10.0 False None None False None False 1854.8 0 2998389 99862 None CSR2023-24 V-6 Page No 10 Item No 3.14.1 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board 6A SP Switch ---- etc., complete with all lead Each 65.4 65.4 18.0 False None None False None False 1177.2 0 2998390 99862 None CSR2023-24 V-6 Page No 10 Item No 3.14.2 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board6A Two Way Switch ---- etc., complete with all lead Each 83.23 83.23 28.0 False None None False None False 2330.44 0 2998391 99862 None CSR2023-24 V-6 Page No 10 Item No 3.14.3 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board6A Three Way 5 Pin Socket ---- etc., complete with all lead Each 83.23 83.23 30.0 False None None False None False 2496.9 0 2998392 99862 None CSR2023-24 V-6 Page No 10 Item No 3.14.4 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board 6A Three Pin Top ---- etc., complete with all lead Each 103.44 103.44 20.0 False None None False None False 2068.8 0 2998393 99862 None CSR2023-24 V-6 Page No 10 Item No 3.14.5 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board 6A Bakelite Ceiling Rose ---- etc., complete with all lead Each 92.74 92.74 20.0 False None None False None False 1854.8 0 2998394 99862 None CSR2023-24 V-6 Page No 10 Item No 3.14.6 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board 6A Pendant Holder ---- etc., complete with all lead Each 84.42 84.42 15.0 False None None False None False 1266.3 0 2998395 99862 None CSR2023-24 V-6 Page No 10 Item No 3.14.7 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.Batten holder ---- etc., complete with all lead Each 87.99 87.99 15.0 False None None False None False 1319.85 0 2998396 99862 None CSR2023-24 V-6 Page No 10 Item No 3.14.8 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.6A bell push ---- etc., complete with all lead Each 83.23 83.23 15.0 False None None False None False 1248.45 0 2998397 99862 None CSR2023-24 V-6 Page No 10 Item No 3.14.9 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 6A bell buzzer ---- etc., complete with all lead Each 154.57 154.57 15.0 False None None False None False 2318.55 0 2998398 99862 None CSR2023-24 V-6 Page No 10 Item No 3.14.10 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board 16A SP switch ---- etc., complete with all lead Each 155.76 155.76 20.0 False None None False None False 3115.2 0 2998399 99862 None CSR2023-24 V-6 Page No 10 Item No 3.14.11 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board 16A Two Way Switch ---- etc., complete with all lead Each 173.59 173.59 20.0 False None None False None False 3471.8 0 2998400 99862 None CSR2023-24 V-6 Page No 10 Item No 3.14.12 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 16A Three 5 Pin Socket ---- etc., complete with all lead Each 136.74 136.74 20.0 False None None False None False 2734.8 0 2998401 99862 None CSR2023-24 V-6 Page No 10 Item No 3.14.13 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.16 A Three pin top ---- etc., complete with all lead Each 130.79 130.79 15.0 False None None False None False 1961.85 0 2998402 99862 None CSR2023-24 V-6 Page No 10 Item No 3.14.14 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.32 A backlight DP ---- etc., complete with all lead Each 275.85 275.85 9.0 False None None False None False 2482.65 0 2998403 99862 None CSR2023-24 V-6 Page No 10 Item No 3.14.15 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 16/6A combined plug and socket with control switch ---- etc., complete with all lead Each 259.2 259.2 9.0 False None None False None False 2332.8 0 2998404 99862 None CSR2023-24 V-6 Page No 17 Item No 5.18.1 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6-32 A SP ---- etc., complete with all lead Each 493.44 493.44 6.0 False None None False None False 2960.64 0 2998405 99862 None CSR2023-24 V-6 Page No 17 Item No 5.18.2 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.40 A SP ---- etc., complete with all lead Each 942.88 942.88 6.0 False None None False None False 5657.28 0 2998406 99862 None CSR2023-24 V-6 Page No 17 Item No 5.18.3 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.50-63 A SP ---- etc., complete with all lead Each 964.28 964.28 6.0 False None None False None False 5785.68 0 2998407 99862 None CSR2023-24 V-6 Page No 17 Item No 5.18.4 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6-32 A DP ---- etc., complete with all lead Each 878.67 878.67 6.0 False None None False None False 5272.02 0 2998408 99862 None CSR2023-24 V-6 Page No 17 Item No 5.18.5 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.40 A DP ---- etc., complete with all lead Each 1260.34 1260.34 6.0 False None None False None False 7562.04 0 2998409 99862 None CSR2023-24 V-6 Page No 17 Item No 5.18.6 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 50-63 A DP ---- etc., complete with all lead Each 1310.28 1310.28 6.0 False None None False None False 7861.68 0 2998410 99862 None CSR2023-24 V-6 Page No 17 Item No 5.18.7 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6-32 A TPN ---- etc., complete with all lead Each 2041.51 2041.51 6.0 False None None False None False 12249.06 0 2998411 99862 None CSR2023-24 V-6 Page No 17 Item No 5.18.8 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.40 A TPN ---- etc., complete with all lead Each 3619.32 3619.32 6.0 False None None False None False 21715.92 0 2998412 99862 None CSR2023-24 V-6 Page No 18 Item No 5.18.9 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.50-63 A TPN ---- etc., complete with all lead Each 3671.63 3671.63 6.0 False None None False None False 22029.78 0 2998413 99862 None CSR2023-24 V-6 Page No 18 Item No 5.19.1 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.4 Way SP & N ---- etc., complete with all lead Each 1475.55 1475.55 5.0 False None None False None False 7377.75 0 2998414 99862 None CSR2023-24 V-6 Page No 18 Item No 5.19.2 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. 6 Way SP & N ---- etc., complete with all lead Each 1410.15 1410.15 5.0 False None None False None False 7050.75 0 2998415 99862 None CSR2023-24 V-6 Page No 18 Item No 5.19.3 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.8 Way SP & N ---- etc., complete with all lead Each 1773.99 1773.99 5.0 False None None False None False 8869.95 0 2998416 99862 None CSR2023-24 V-6 Page No 18 Item No 5.19.4 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.12 Way SP & N ---- etc., complete with all lead Each 2215.11 2215.11 5.0 False None None False None False 11075.55 0 2998417 99862 None CSR2023-24 V-6 Page No 18 Item No 5.19.5 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.16 Way SP & N ---- etc., complete with all lead Each 3486.15 3486.15 5.0 False None None False None False 17430.75 0 2998418 99862 None CSR2023-24 V-6 Page No 21 Item No 5.46.1 Supplying and fixing of Modular MCB Devices (Tripper) With Breaking capacity of 6kA.16 - 32 A SP ---- etc., complete with all lead Each 249.69 249.69 2.0 False None None False None False 499.38 0 2998419 99862 None CSR2023-24 V-6 Page No 21 Item No 5.46.4 Supplying and fixing of Modular MCB Devices (Tripper) With Breaking capacity of 6kA. 16 - 32 A TP ---- etc., complete with all lead Each 953.58 953.58 2.0 False None None False None False 1907.16 0 2998420 99862 None CSR2023-24 V-6 Page No 19 Item No 5.32 Supplying and fixing digital frequency M with latest micro controller technology, ultra bright 4 digit LED display, from 30-500V AC and optional or relay output for high/low frequency and wiring complete ---- etc., complete with all lead Each 1159.28 1159.28 4.0 False None None False None False 4637.12 0 2998421 99862 None CSR2023-24 V-6 Page No 18 Item No 5.21 Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage current, programmable delay/auto/manual reset facility suitable to mount on DIN rail/ flush mounting on panel board ---- etc., complete with all lead Each 11004.2 11004.2 4.0 False None None False None False 44016.8 0 2998422 99862 None CSR2023-24 V-6 Page No 43 Item No 11.3.1 Supplying of .....feet -PVC Batten with integrated LED tube ....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greaterthan 80. Power Input: 220-240V@ 50/60Hz & Power factor greaterthan0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.LED light fitting 1 x 2' - 9/10 W ---- etc., complete with all lead Each 655.14 655.14 15.0 False None None False None False 9827.1 0 2998423 99862 None CSR2023-24 V-6 Page No 43 Item No 11.3.2 Supplying of .....feet -PVC Batten with integrated LED tube ....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greaterthan 80. Power Input: 220-240V@ 50/60Hz & Power factor greaterthan0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 4' - 20/22 W ---- etc., complete with all lead Each 820.41 820.41 15.0 False None None False None False 12306.15 0 2998424 99862 None CSR2023-24 V-6 Page No 30 Item No 6.3.1 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system.48" Sweep (1200 mm) Regular model ---- etc., complete with all lead Each 3547.98 3547.98 10.0 False None None False None False 35479.8 0 2998425 99862 None CSR2023-24 V-6 Page No 30 Item No 6.2.1 Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete 12" Sweep (300 mm) ---- etc., complete with all lead Each 3530.14 3530.14 10.0 False None None False None False 35301.4 0 2998426 99862 None CSR2023-24 V-6 Page No 57 Item No 13.1 Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring. ---- etc., complete with all lead Each 203.32 203.32 10.0 False None None False None False 2033.2 0 2998427 99862 None CSR2023-24 V-6 Page No 57 Item No 13.13 Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame ---- etc., complete with all lead Each 840.62 840.62 10.0 False None None False None False 8406.2 0 2998428 99862 None CSR2023-24 V-6 Page No 58 Item No 13.19 Fixing all types and all capacities of 1'x4' / 2'x2' LED Light fittings indoor on the wall / ceiling / rafters / girders with necessary supporting frame, using 2310.0076" twin twisted PVC insulated wires, required No of round blocks and clA. ---- etc., complete with all lead Each 582.61 582.61 25.0 False None None False None False 14565.25 0 2998429 99862 None CSR2023-24 V-6 Page No 17 Item No 5.18.1 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6-32 Amps SP ---- etc., complete with all lead Each 493.44 493.44 7.0 False None None False None False 3454.08 0 2998430 99862 None CSR2023-24 V-6 Page No 17 Item No 5.18.9 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.50-63 Amps TPN ---- etc., complete with all lead Each 3671.63 3671.63 9.0 False None None False None False 33044.67 0 2998431 99862 None CSR2023-24 V-6 Page No 15 Item No 5.11.1 Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. (Open Execution)upto 63 Amps ---- etc., complete with all lead Each 6515.72 6515.72 6.0 False None None False None False 39094.32 0 2998432 99862 None CSR2023-24 V-6 Page No 15 Item No 5.11.3 Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. (Open Execution)125 Amps ---- etc., complete with all lead Each 12277.61 12277.61 7.0 False None None False None False 85943.27 0 2998433 99862 None CSR2023-24 V-6 Page No 57 Item No 13.18.4 Fixing of ..... A TPST / change over switch / Contactor along with neutral link with screws, bolts, nuts and wiring using required capacity wires and circuit labelling.15-63 Amps TPDT/COS ---- etc., complete with all lead Each 344.81 344.81 7.0 False None None False None False 2413.67 0 2998434 99862 None CSR2023-24 V-6 Page No 58 Item No 13.18.5 Fixing of ..... A TPST / change over switch / Contactor along with neutral link with screws, bolts, nuts and wiring using required capacity wires and circuit labelling.125 Amps TPDT/COS ---- etc., complete with all lead Each 560.02 560.02 7.0 False None None False None False 3920.14 0 2998435 99862 None CSR2023-24 V-5 Page No 113 Item No 10.1.5 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. PVC pipes 75mm dia., 6 kg/sqcm & class 3 ---- etc., complete with all lead m 272.58 272.58 240.0 False None None False None False 65419.2 0 2998436 99862 None CSR2023-24 V-5 Page No 113 Item No 10.1.7 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc.PVC pipes 110mm dia., 6 kg/sqcm & class 3 ---- etc., complete with all lead m 509.22 509.22 100.0 False None None False None False 50922.0 0 2998437 99862 None CSR2023-24 V-2 Page No 122 Item No 13.32.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15mm dia ---- etc., complete with all lead m 382.85 382.85 65.0 False None None False None False 24885.25 0 2998438 99862 None CSR2023-24 V-2 Page No 122 Item No 13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.20mm dia ---- etc., complete with all lead m 469.58 469.58 50.0 False None None False None False 23479.0 0 2998439 99862 None CSR2023-24 V-2 Page No 122 Item No 13.32.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.25mm dia ---- etc., complete with all lead m 591.0 591.0 100.0 False None None False None False 59100.0 0 2998440 99862 None CSR2023-24 V-2 Page No 122 Item No 13.32.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.32mm dia ---- etc., complete with all lead m 690.12 690.12 200.0 False None None False None False 138024.0 0 2998441 99862 None CSR2023-24 V-2 Page No 123 Item No 13.34 Providing and placing on terrace (at all floor levels) polyethylene water storage tank,IS:12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank. ---- etc., complete with all lead l 11.15 11.15 4000.0 False None None False None False 44600.0 0 2998442 99862 None CSR2023-24 V-5 Page No 191 Item No 16.9 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover. ---- etc., complete with all lead No 6757.5 6757.5 47.0 False None None False None False 317602.5 0 2998443 99862 None CSR2023-24 V-3 Page No 9 Item No 2.4 (A) Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness..By Manual MeansIn area of light jungle ---- etc., complete with all lead Sqm 1390.2 1390.2 0.8 False None None False None False 1112.16 0 2998444 99862 None CSR2023-24 V-1 Page No 8 Item No 1.12 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth ---- etc., complete with all lead Cum 117.7 117.7 24.0 False None None False None False 2824.8 0 2998445 99862 None CSR2023-24 V-1 Page No Item No 1.15.3 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work Depth exceeding 3m, but not exceeding 4.5m ---- etc., complete with all lead Cum 573.7 573.7 131.46 False None None False None False 75418.602 0 2998446 99862 None CSR2023-24 V-1 Page No 15 Item No 2.1.2 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 7017.7 7017.7 5.9039 False None None False None False 41431.79903 0 2998447 99862 None CSR2023-24 V-1 Page No 16 Item No 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates BOTTOM SLAB,RC WALL,TOP SLAB,Beams ---- etc., complete with all lead Cum 12717.7 12717.7 35.61 False None None False None False 452877.297 0 2998448 99862 None CSR2023-24 V-1 Page No 18 Item No 2.11 (a) Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. for Building ---- etc., complete with all lead Tonne 110837.2 110837.2 4.3493 False None None False None False 482064.23396 0 2998449 99862 None CSR2023-24 V-2 Page No 149 Item No 15.1 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. ---- etc., complete with all lead Sqm 1012.3 1012.3 107.0 False None None False None False 108316.1 0 2998450 99862 None CSR2023-24 V-2 Page No 43 Item No 8.12 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineerin-Charge. ---- etc., complete with all lead Kg 79.3 79.3 35.0 False None None False None False 2775.5 0 2998451 99862 None CSR2023-24 V-2 Page No 17 Item No 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications ---- etc., complete with all lead Sqm 1623.1 1623.1 0.899 False None None False None False 1459.1669 0 2998452 99862 None CSR2023-24 V-2 Page No 42 Item No 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 459.7 459.7 58.37 False None None False None False 26832.689 0 2998453 99862 None CSR2023-24 V-2 Page No 41 Item No 8.3.1 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge ---- etc., complete with all lead Sqm 438.6 438.6 85.0 False None None False None False 37281.0 0 2998454 99862 None CSR2023-24 V-2 Page No 46 Item No 8.3 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 215.6 215.6 58.379 False None None False None False 12586.5124 0 2998455 99862 None CSR2023-24 Page No Item No XXXVIII Providing and fixing C. I Manhole covers 24" x 24" ---- etc., complete with all lead No 3100.0 3100.0 2.0 False None None False None False 6200.0 0 2998456 99862 None CSR2023-24 V-2 Page No 83 Item No 11.16.3 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Electric resistance or induction butt welded tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete with all lead Kg 151.2 151.2 22.5 False None None False None False 3402.0 0 2998457 99862 None CSR2023-24 V-2 Page No 85 Item No 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete with all lead Kg 700.0 700.0 31.2 False None None False None False 21840.0 0 2998458 99862 None 146 BAR SCREEN CHAMBER: MSFRP Bar Screen chamber rectangular tank,made up of Mild steel coated with FRP lining,Bar Screen Chamber Diemesion:1000x1000x1000 Length :1000 mm,Width :1000 mm,Height :1000 mm,Mild steel sheet Thickness: 3mm,FRP Lining ,Internal Thickness : 2mm,External Thcness: 2mm,inlet nozzelDia :4 inch,outLetnozzel Dia: 4 Bar Screen Size : 10mm,screen MOC : Mild Steel,Screen coating : Epoxy,Make : Orionwater. ---- etc., complete with all lead Set 53100.0 53100.0 1.0 False None None False None False 53100.0 0 2998459 99862 None 147 RAW SEWAGE TRANSFER PUMP Raw Sewage transfer pump capable of handling,sewage transfer from collection tank to RBC STP,maximum solid handling size upto 50 mm,Type : Centrifugal monoblock,Impeller :open,motor HP:1,RPM:2700,Flow Rate:2 m3/hr,Head:10,Moc : Cl,solid Particle Size Handling: 7 mm A).Valve : Suction : 2 No,Delivery : 2 No,Size :50 mm,Moc : B).Type : Ball /Butterfly, Non Return Valve, Delivery : 2 No, Size :50 mm, Moc : Make : Kriloskar / CRI, Pump (1 w + 1S) 2No of pump = 1 set. ---- etc., complete with all lead Set 59000.0 59000.0 1.0 False None None False None False 59000.0 0 2998460 99862 None 148 STP Rectamgular Tank Size and dimension:Width : 1500 mm, Over Height including Top Cover : 3000 mm, Length :6100 mm, MOC of rectangular Tank : Mild Steel, Shell Thickness: 5 mm FRP lining, Internal Liniing : 3 mm, External Lining : 3 mm, Pipe inlet Dia: 80 mm, Pipe Outlet Dia: 80 mm, Drain Header pipe Dia: 80 mm ---- etc., complete with all lead Set 1046660.0 1046660.0 1.0 False None None False None False 1046660.0 0 2998461 99862 None 149 Primary clarifier : Type : Lamella, No of Plates: 10, Lamella plate MOC: FRP, Lemella Plate Thickness: 2 mm ---- etc., complete with all lead Set 457840.0 457840.0 1.0 False None None False None False 457840.0 0 2998462 99862 None 150 Secondary clarifier: Type : Lamella, No of Plates: 19, Lamella plate MOC: FRP, Lemella Plate Thickness: 3 mm ---- etc., complete with all lead Set 450760.0 450760.0 1.0 False None None False None False 450760.0 0 2998463 99862 None 151 ROTOR: No of Rotors: 2, Moc: FRP, DiaM of Rotor : 1000mm, Connected with , Shaft : EN 90 Rod, Driven by : pillar Block, No of pillar block: 4 ---- etc., complete with all lead Set 488520.0 488520.0 1.0 False None None False None False 488520.0 0 2998464 99862 None 152 Bio Zone (Rotor Placement Boat) No. of Biozone : 1 No, No. of Partisian inside Bio-zone : 4 No, MOC : MSFRP, Boat curvature DiaM : 1800mm, Bio Zone supporting with 150mm, Beam 2 No & 4 No. Legs., Boat Size:3350 mm ---- etc., complete with all lead Set 436600.0 436600.0 1.0 False None None False None False 436600.0 0 2998465 99862 None 153 Gear Box : Type: Helical, No of Gear Box: 1 no, Make : Bonfigoli (Germany), Gear Box Motor HP: 1, Gear Box motor Make : Seimens. ---- etc., complete with all lead Set 112100.0 112100.0 1.0 False None None False None False 112100.0 0 2998466 99862 None 154 Internal Piping & Base Works : 1) Inter connecting pipe works with FRP lining inside process tank, Recirculion& drain system. 2)Base Plate works for Gear box arrangement,Rotor Fixing arrangement,Biozone leg placement arrangement. RBC STP Make : Orionwater ---- etc., complete with all lead Set 68440.0 68440.0 1.0 False None None False None False 68440.0 0 2998467 99862 None 155 FILTER FEED PUMP: Filter feed pump capable of handling to transfer clarifed to filtration plant maximum solid handling size upto 20 mm, Type : Centrifugal monoblock, Impeller : Closed motor HP:3, RPM:1700, Flow Rate: 6m3/hr, Head:30, Moc : solid Particle Size Handling: 50mm Valve , Suction : 2 No, Delivery : 2 No, Size :50 mm, Moc : Type : Ball /Butterfly, Non Return Valve, Delivery : 2 No, Size :50 mm, Moc : , Make : Kriloskar / CRI, Pump (1 w + 1S) 2No of pump = 1 set ---- etc., complete with all lead Set 29500.0 29500.0 1.0 False None None False None False 29500.0 0 2998468 99862 None 156 SAND FILTER : DiaM: 600 mm, Height On Straight: 1900 mm, Shell hickness: 6mm, Dish end Thickness: 8mm, Frontal Pipeline:, MOC: Mild Steel, External Coating : Red Oxide and Enamel paint, Internal Coating: Black Bitumus, Fiter Media: Fine Sand, Gravel sand, pebbles,silex, Media in KG: 450, Media Depth : 915 mm, Type : Cylindrical, Vertical. ---- etc., complete with all lead Set 159300.0 159300.0 1.0 False None None False None False 159300.0 0 2998469 99862 None 157 ACTIVATED CARBON FILTER: DiaM: 600 mm,Height On Straight: 1900 mm, Shell hickness: 6mm,Dish end Thickness: 8mm Frontal Pipeline: MOC: Mild Steel,External Coating :Red Oxide and Enamel paint,Internal Coating: Black Bitumus,Fiter Media: Activated Carbon Media in KG: 150,Media Depth : 1000 mm,Type : Cylindrical. ---- etc., complete with all lead Set 159300.0 159300.0 1.0 False None None False None False 159300.0 0 2998470 99862 None 158 CHLORINE DOSING SYSTEM, Pump type : ElectonicDiaphram Capacity : 0- 2LPH, Nominal Back pressure : 6 KG/CM2, Maximum Back pressure: 8 KG/CM2 KW: 0.24 watt, Tank Capacity : 100 Liters, MOC: PP, Make : LMI Asia ---- etc., complete with all lead Set 33040.0 33040.0 1.0 False None None False None False 33040.0 0 2998471 99862 None 159 INTERCONNECTING PIPE WORK All necessary pipe work from Bar Screen chamber to collection tank, collection tank to Raw sewage transfer pump, Raw sewage transfer pump to RBC STP, RBC STP to Filter feed pump, Filter feed pump to Filtration plant and filtration plant to treated water tank The scope shall be PVC pipes with all necessary valves, NRV , Float switch and drain Header. ---- etc., complete with all lead Set 147500.0 147500.0 1.0 False None None False None False 147500.0 0 2998472 99862 None 160 CONTROL PANEL: Installation, testing and commissioning of Electrical Panel suitable for 415V, 3 phase, 4 wire, 50Hz distribution system. The panel shall be Wall Mounting type, sheet metal enclosed, flush front with aluminium busbars, separate earth bus shall be provided throughout the length of the panel. The incoming and the outgoing feeder breakers, switch fuse units, change over switches, indicating lamps, Ms etc. shall be accommodated in a modular multi-tier arrangement. The painting shall be done in conformity with IS code. Adequate size cable alley shall be provided all around the panel and at the back for easy bending and terminations. The outgoing feeders inside the panel shall be connected through solid busbars. Busbars shall be provided with PVC heat shrinkable sleeves or heat resistant insulated paint. The panels shall be suitable for cable entry from top / bottom. ---- etc., complete with all lead Set 206500.0 206500.0 1.0 False None None False None False 206500.0 0 2998473 99862 None 161 FREIGHT LOADING AND UNLOADING : All the equipment shall be loaded ,transported and unloaded at site. Including the necessary Cranes required to erect and position the system ---- etc., complete with all lead Set 88500.0 88500.0 1.0 False None None False None False 88500.0 0 2998474 99862 None 162 INSTALLATION, ERECTION, COMMISSIONING, TESTING AND HANDING OVER AT SITE. From the Inlet of the Bar Screen chamber to the output of Caron filter ---- etc., complete with all lead Set 118000.0 118000.0 1.0 False None None False None False 118000.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1710227435000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1710227435000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1710227435000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of Karnataka public Procurement on or before the last date and time of bid submission. None 1710227435000 0 None None ELIGIBILITY The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of Karnataka public Procurement portal due to internet connectivity issues and technical glitches at bidders end None 1710227435000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection None 1710227435000 0 None None ELIGIBILITY Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder None 1710227435000 0 None None ELIGIBILITY The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs None 1710227435000 0 None None ELIGIBILITY Conditional tenders will not be accepted. None 1710227435000 0 None None ELIGIBILITY All the formats prescribed in the bid document shall be filled by the tenderer in complete manner. None 1710227435000 0 None None ELIGIBILITY Royalty on construction materials and other taxes will be deducted as per prevailing Govt., orders as may be modified from time to time. None 1710227435000 0 None None ELIGIBILITY Any discrepancies observed in the documents uploaded by the tenderer the tender shall liable to rejected. None 1710227435000 0 None None ELIGIBILITY Earnest Money Deposit will have to be in any one of the forms as per the instructions in the financial bid document and shall have to be valid for 45 days beyond the validity of the tender. None 1710227435000 0 None None ELIGIBILITY All formats prescribed in the bid documents shall be filled in complete manner (section 2 & of the bid document)and shall be uploaded properly, signed by tenderer. Necessary certificates shall be uploaded along with the formats wherever required. General documents section can be used for this purpose None 1710227435000 0 None None ELIGIBILITY Tenderers are required to read the Bid Documents carefully before submission of their bid None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx) None None None None None None Total value of civl engineering works executed and payments received in the last five years (year-wise) None None None None None None List of works for which tenders already submitted None None None None None None Banker Details for reference None None None None None None Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years None None None None None None Clause ITT 3.2(b)To qualify for award of this contract, each Tenderer in his/its name should have in the last five years i.e.(2018-19 to 2022-23) The tenderer should have been Satisfactorily completed at least one Satisfactorily completed at least one Similar work of value not less than Rs.126.50 Lakhs as prime contractor. Note : The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (b). Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Clause 3.2(c) To qualify for award of this contract, each Tenderer in his/its name should have in the last five years i.e.(2018-19 to 2022-23).Executed in any one year, the following minimum quantities of work Sl. No Description of key items of works Quantity 1)Earthwork Excavation 440.00 Cum,2)RCC and PCC 116.00 Cum 3)Steel Reinforcement for RCC work 7.00 Tonnes 5)Flooring/Dadooing(Vitrified/Granite/ Ceramic/Cement concrete/cladding/ dadooing) 2000.00 Sqm,6)Plastering 1000.00 Sqm,7)Painting 5900.00 Sqm, 8)WPC-240.00 sqm. Note-The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2(c) Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Clause 3.2(d) The tenderer or his identified sub contractor should possess required valid electrical license for executing building electrification works issued by KPWD/ Government electrical Inspectorate and should have executed similar Building electrical works totaling Rs.13.00 Lakhs in any one year.Note-The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (d).The letter of willingness of the sub contractor to be engaged for electrical, should be obtained and uploaded in the KPP-portal. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Clause 3.2(e)The Tenderer or his identified sub-contractor should possess valid license for executing water supply/sanitary engineering works issued by BWSSB/ KUWS&DB and should have executed similar building water supply/sanitary engineering works totaling Rs.10.00 Lakhs in any one year. Note-The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (e).The letter of willingness of the sub contractor to be engaged for water supply & Sanitary, should be obtained and uploaded in the KPP-portal. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Clause 3.2(f) The Tenderer or his identified sub-contractor should have executed similar STPworks totaling to Rs.50.00 Lakhs in any one year. Note-The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (f). The letter of willingness of the sub contractor to be engaged for STP works should be obtained and uploaded in the KPP-portal. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None List of existing commitments and ongoing worksClause 3.6 Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated for prime contractor are as under Assessed available tender capacity AxNx1.5- B Where A maximum value of civil engineering works executed in any one year during the last five years 2018-19 to 2022-23 updated to 2023-24 price level taking into account the completed as well as works in progress. N Number of years prescribed for completion of the works for which tenders are invited. B Value, at 2023 24 price level, of existing commitments and ongoing works to be completed during the next 06 months. Note:The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent. certificate issued by the officer not lessthan the rank of Executive Engineer Ongoing commitments and Bids submitted for the works Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- certificate issued by the officer not lessthan the rank of Executive Engineer Ongoing commitments and Bids submitted for the works None None None None Clause ITT 3.3 (a)Equipment capacity Each tenderer should further demonstrate(a) available by owning at least 50% of the required/specified key and critical equipment for this work and (b) the remaining 50% can be deployed on ease/hire basis for all works provided, the relevant documents (commitment agreements etc.,) for availability for this work are furnished. Sl.No. Description of Equipment Quantity -1.Min 10 cft capacity Concrete Mixer-1 No. 2.Tipper-1 No 3.Excavator-1 No. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Invoice and Receipt document to be uploaded. None None None None List of Minimum Key Personnel to be deployed by the contractor at site for Contract work Sl No Position Qualification and Requirement No Of Persons 1)Site Engineer BE Civil with minimum experience of 7 years in the Construction of buildings Or Diploma in Civil Engineering with minimum experience of 10 years in the Construction of buildings and should have been working in permanent role of the organization for at least two years 2 Two Nos 2)Electrical Engineer BE Electrical with minimum experience of 5 years in the Construction of buildings Or Diploma in Electrical Engineering with minimum experience of 10 years in the Construction of buildings- 1No and should have been working inpermanent role of the organization for at least two years. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Educational and Experience certificates should be uploaded None None None None Clause ITT 3.2(a):The tenderer should have been achieved in at least two financial years a minimum annual financial turnover (in all classes of civil Engineering construction works only) of Rs.506.00 Lakhs. Note : a) For Clause 3.2 (a) the certificate Turn over and balance sheet duly certified by the charted accountant is to be submitted. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Clause 3.3(b)Liquid assets and /or availability of credit facilities of not less than Rs.76.00 Lakhs (Credit lines / letter of credit/ certificates from banks for meeting the fund requirement etc.(As per the prescribed format in clause 1.10 of SECTION 3, QUALIFICATION INFORMATION of this document.) as prime Contractor. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit
tenderCriterionDocumentList	documentName optional documentTypeText Annual Turnover Certificate and balance sheet issued by Charted accountant. True Technical Bid KPWD Class-II and above Registration Certificate issued by Chief Engineer. True Technical Bid Tenderer should have ESI & PF Certificates his/firm name and PF paid receipt of last month. True Technical Bid Tenderer should have latest GST Registration PAN Card and latest 3 GSTclearance certificate in their name. True Technical Bid The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer True Technical Bid
tenderWorkLocationList
tenderAddress	createdTs 1710237262000 version 0 createdDate None modifiedDate None blockNumber Office of the Chief Engineer, Engineering Wing, Arogya Soudha, 3rd floor, Leprosy Hospital premises, 1st cross, Magadi Road, street None city bengaluru state Karnataka pin 560023
tenderRecallDTO	None