createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1710330415617 version 4 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 3160.00 emd 200000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 28-03-2024 16:00:00 tenderQueryClose 21-03-2024 16:00:00 technicalBidOpen 30-03-2024 16:00:00 publishedDate 13-03-2024 19:27:27 publishedByPost KHB_EE_CO_BNG publishedByUser KPE11677 - SHIVASHANKARAPPA K H bidValidityPeriod 180 noOfCalls 1 preBidMeetingDate 22-03-2024 11:00:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson SHIVASHANKARAPPA K H splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08022273511 mobileNumber 8022273511 tenderSupplierList None
tenderSchedule	createdTs 1710330415655 version 6 createdDate None modifiedDate None tenderNumber KHB/2023-24/BD/WORK_INDENT214 title Construction of Post Metric Girls Hostel 2nd Phase at Davanagere, Davanagere District description Construction of Post Metric Girls Hostel 2nd Phase at Davanagere, Davanagere District category WORKS categoryText Works ecv 12622618.99 deptName Karnataka Housing Board status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn False location 5488 locationName KHB Central Office Bengaluru provisionalAmount 12622619.0 groupOverheadTotal None fileNumber 755/2023-24
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1710330416000 0 None None Buildings Construction of Post Metric Girls Hostel 2nd Phase at Davanagere, Davanagere District 12622618.99 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3043717 102853 None code01 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications,including setting out, shoring, strutting, barricading, caution lights,including dressing of excavated surfaces, disposing off or levelling thexcavated earth or sorting & stacking the selected earth for reuse in aradius of 50 m and lift upto 1.5 m including cost of labour, tools, usageof machinery & other appurtenaces required to complete the workIn all kinds of soils Depth upto 3 m. (VOL -1 PG -8.ITEM NO -1.14.1) Cum 107.1 107.1 6.4371 False None None False None False 689.41341 0 3043718 102853 None code02 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications,including setting out, shoring, strutting, barricading, caution lightsincluding dressing of excavated surfaces, disposing off or levelling theexcavated earth or sorting & stacking the selected earth for reuse in aradius of 50 m and lift upto 1.5 m including cost of labour, tools, usageof machinery & other appurtenaces required to complete the work In soft rock depth exceeding 1.5m, but not exceeding 3m. (VOL-1 PG - 9. ITEM NO - 1.15.2) Cum 446.25 446.25 2.92 False None None False None False 1303.05 0 3043719 102853 None code03 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm and down size graded crushed coarse aggregates. VOL-1 PG-15. ITEM NO. - 2.1.3 ( Cum 6288.45 6288.45 5.93 False None None False None False 37290.5085 0 3043720 102853 None code04 KSRB 5.2-3: Providing and constructing granite/trap/basalt size stone masonry in foundtaion with cement mortar 1:6 edges of stones chistle dressed in courses not less than 15 cm high, bond stones at 2 Mtr apart in each course including cost of materials, labour curing complete as per specifications. KBS 5.1.13. (VOL-6 PG-7. ITEM NO - 33.11) Cum 6043.8 6043.8 5.47 False None None False None False 33059.586 0 3043721 102853 None code05 Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. (VOL - 1 PG -7. ITEM NO - 1.80) Cum 497.7 497.7 6.85 False None None False None False 3409.245 0 3043722 102853 None code06 GF - DPC 1:3:6-Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates. (VOL - 1 PG - 15. ITEM NO - 2.1.4) Cum 6527.85 6527.85 2.36 False None None False None False 15405.726 0 3043723 102853 None code07 SF - DPC 1:3:6-Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates. (VOL - 1 PG - 15. ITEM NO - 2.1.4) Cum 6658.41 6658.41 2.12 False None None False None False 14115.8292 0 3043724 102853 None code08 TERRACE - DPC 1:3:6-Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates. (VOL - 1 PG - 15. ITEM NO - 2.1.4) Cum 6723.69 6723.69 2.07 False None None False None False 13918.0383 0 3043725 102853 None code09 GF - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. ( VOL -1 PG- 16. ITEM NO - 2.5.2) Cum 10777.73 10777.73 3.83 False None None False None False 41278.7059 0 3043726 102853 None code10 FF - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. ( VOL -1 PG- 16. ITEM NO - 2.5.2) Cum 10849.58 10849.58 4.05 False None None False None False 43940.799 0 3043727 102853 None code11 SF - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. ( VOL -1 PG- 16. ITEM NO - 2.5.2) Cum 12459.05 12459.05 25.31 False None None False None False 315338.5555 0 3043728 102853 None code12 SF LINTEL - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. ( VOL -1 PG- 16. ITEM NO - 2.5.2) Cum 11726.16 11726.16 7.04 False None None False None False 82552.1664 0 3043729 102853 None code13 SF CHAJJA - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. ( VOL -1 PG- 16. ITEM NO - 2.5.2) Cum 10626.84 10626.84 5.39 False None None False None False 57278.6676 0 3043730 102853 None code14 SF ROOF BEAMS - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. ( VOL -1 PG- 16. ITEM NO - 2.5.2) Cum 11726.16 11726.16 23.39 False None None False None False 274274.8824 0 3043731 102853 None code15 SF STAIRCASE - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. ( VOL -1 PG- 16. ITEM NO - 2.5.2) Cum 10993.28 10993.28 4.45 False None None False None False 48920.096 0 3043732 102853 None code16 SF ROOF SLAB - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. ( VOL -1 PG- 16. ITEM NO - 2.5.2) Cum 10993.28 10993.28 79.35 False None None False None False 872316.768 0 3043733 102853 None code17 HEADROOM COLUMN - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. ( VOL -1 PG- 16. ITEM NO - 2.5.2) Cum 12581.2 12581.2 2.3 False None None False None False 28936.76 0 3043734 102853 None code18 HEADROOM BEAM - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. ( VOL -1 PG- 16. ITEM NO - 2.5.2) Cum 11841.13 11841.13 3.15 False None None False None False 37299.5595 0 3043735 102853 None code19 HEADROOM SLAB - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. ( VOL -1 PG- 16. ITEM NO - 2.5.2) Cum 11101.06 11101.06 4.53 False None None False None False 50287.8018 0 3043736 102853 None code20 HEADROOM LINTEL - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. ( VOL -1 PG- 16. ITEM NO - 2.5.2) Cum 11841.13 11841.13 1.13 False None None False None False 13380.4769 0 3043737 102853 None code21 HEADROOM CHAJJA - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. ( VOL -1 PG- 16. ITEM NO - 2.5.2) Cum 10731.02 10731.02 0.07 False None None False None False 751.1714 0 3043738 102853 None code22 OHT FLATFORM COLUMN - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. ( VOL -1 PG- 16. ITEM NO - 2.5.2) Cum 12581.2 12581.2 1.62 False None None False None False 20381.544 0 3043739 102853 None code23 OHT FLATFORM BEAM - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. ( VOL -1 PG- 16. ITEM NO - 2.5.2) Cum 11841.13 11841.13 1.92 False None None False None False 22734.9696 0 3043740 102853 None code24 OHT FLATFORM SLAB - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. ( VOL -1 PG- 16. ITEM NO - 2.5.2) Cum 11101.06 11101.06 4.61 False None None False None False 51175.8866 0 3043741 102853 None code25 GF - Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately). (VOL-1 PG - 18. ITEM NO - 2.11a) Kg 93.93 93.93 382.5 False None None False None False 35928.225 0 3043742 102853 None code26 FF - Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately). (VOL-1 PG - 18. ITEM NO - 2.11a) Kg 94.87 94.87 405.0 False None None False None False 38422.35 0 3043743 102853 None code27 SF - Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately). (VOL-1 PG - 18. ITEM NO - 2.11a) Kg 95.81 95.81 18380.29 False None None False None False 1761015.5849 0 3043744 102853 None code28 HEADROOM- Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately). (VOL-1 PG - 18. ITEM NO - 2.11a) Kg 96.75 96.75 1841.24 False None None False None False 178139.97 0 3043745 102853 None code29 OHT- Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately). (VOL-1 PG - 18. ITEM NO - 2.11a) Kg 96.75 96.75 1406.48 False None None False None False 136076.94 0 3043746 102853 None code30 SF - Providing and laying CINDER concrte in cement 1:15(1cement :15cinder pf 12.5mm nominal guage) on terraced roof or sunken slabs, laid to slope compacting including cost of materials , labour, curing complete as per specification. (VOL-2 PG 23. ITEM NO - 7.18) Cum 2160.21 2160.21 13.75 False None None False None False 29702.8875 0 3043747 102853 None code31 GF -Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. (VOL - 2 PG - 17. ITEM NO. - 6.32) Sqm 1375.5 1375.5 8.0 False None None False None False 11004.0 0 3043748 102853 None code32 SF -Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. (VOL - 2 PG - 17. ITEM NO. - 6.32) Sqm 1403.01 1403.01 201.26 False None None False None False 282369.7926 0 3043749 102853 None code33 SF - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ( VOL-2 PG -17 ITEM NO - 6.33 Sqm 1318.4 1318.4 326.5 False None None False None False 430457.6 0 3043750 102853 None code34 HEAD ROOM - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ( VOL-2 PG -17 ITEM NO - 6.33 Sqm 1331.33 1331.33 203.6 False None None False None False 271058.788 0 3043751 102853 None code35 GF - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. (VOL - 2PG -17. ITEM NO - 6.34) Sqm 1159.2 1159.2 19.89 False None None False None False 23056.488 0 3043752 102853 None code36 GF - Inside Plaster: Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (VOL - 2 PG 41. ITEM NO - 8.2.1) Sqm 309.75 309.75 28.68 False None None False None False 8883.63 0 3043753 102853 None code37 SF INTERNAL - Inside Plaster: Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (VOL - 2 PG 41. ITEM NO - 8.2.1) Sqm 315.95 315.95 1199.71 False None None False None False 379048.3745 0 3043754 102853 None code38 HEADROOM - Inside Plaster: Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (VOL - 2 PG 41. ITEM NO - 8.2.1) Sqm 319.04 319.04 55.79 False None None False None False 17799.2416 0 3043755 102853 None code39 SF - CIELING Ceiling Plaster: Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (VOL -2 PG - 41. ITEM NO - 8.4.1) Sqm 345.93 345.93 370.46 False None None False None False 128153.2278 0 3043756 102853 None code40 TERRACE - CIELING Ceiling Plaster: Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (VOL -2 PG - 41. ITEM NO - 8.4.1) Sqm 349.32 349.32 91.15 False None None False None False 31840.518 0 3043757 102853 None code41 GF - External Plaster: Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. (VOL - 2 PG - 42. ITEM NO - 8.9) Sqm 404.25 404.25 63.75 False None None False None False 25770.9375 0 3043758 102853 None code42 FF - External Plaster: Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. (VOL - 2 PG - 42. ITEM NO - 8.9) Sqm 408.29 408.29 71.25 False None None False None False 29090.6625 0 3043759 102853 None code43 SF - External Plaster: Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. (VOL - 2 PG - 42. ITEM NO - 8.9) Sqm 412.34 412.34 478.1 False None None False None False 197139.754 0 3043760 102853 None code44 OHT - External Plaster: Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. (VOL - 2 PG - 42. ITEM NO - 8.9) Sqm 416.38 416.38 375.19 False None None False None False 156221.6122 0 3043761 102853 None code45 SF - Providing and laying Vitrified tiles with spacer in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600mm. ( VOL-2 PG - 61. ITEM NO - 9.17.2) Sqm 1258.43 1258.43 382.36 False None None False None False 481173.2948 0 3043762 102853 None code46 HEADROOM - Providing and laying Vitrified tiles with spacer in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600mm. ( VOL-2 PG - 61. ITEM NO - 9.17.2) Sqm 1270.76 1270.76 31.37 False None None False None False 39863.7412 0 3043763 102853 None code47 SF - Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. ( VOL - 2 PG -60 . ITEM NO - 9.11) Sqm 952.12 952.12 67.56 False None None False None False 64325.2272 0 3043764 102853 None code48 SF - Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2, including pointing in white cement mixed with pigment of matching shade complete. ( VOL - 2 PG -71. ITEM NO - 10.14) Sqm 1184.53 1184.53 535.2 False None None False None False 633960.456 0 3043765 102853 None code49 GF - Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufracturer, over the plastered wall surface to prepare the surface even and smooth complete as per specification and as per directions of Engineer in charge. ( VOL - 2 PG 50. ITEM NO - 8.51) Sqm 105.0 105.0 28.68 False None None False None False 3011.4 0 3043766 102853 None code50 SF - Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufracturer, over the plastered wall surface to prepare the surface even and smooth complete as per specification and as per directions of Engineer in charge. ( VOL - 2 PG 50. ITEM NO - 8.51) Sqm 107.1 107.1 1570.17 False None None False None False 168165.207 0 3043767 102853 None code51 OHT - Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufracturer, over the plastered wall surface to prepare the surface even and smooth complete as per specification and as per directions of Engineer in charge. ( VOL - 2 PG- 50. ITEM NO - 8.51) Sqm 108.15 108.15 146.94 False None None False None False 15891.561 0 3043768 102853 None code52 GF -Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50grams/litre of approved brand and manufracture, including applying addition coats wherever required to achieve even shadeand colour.Twocoatsas per specifications and as per directions of Engineerin charge. (VOL -2 PG -50. ITEM NO - 8.54.2) Sqm 115.5 115.5 28.68 False None None False None False 3312.54 0 3043769 102853 None code53 SF-Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50grams/litre of approved brand and manufracture, including applying addition coats wherever required to achieve even shadeand colour.Twocoatsas per specifications and as per directions of Engineerin charge. (VOL -2 PG -50. ITEM NO - 8.54.2) Sqm 117.81 117.81 1570.17 False None None False None False 184981.7277 0 3043770 102853 None code54 OHT -Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50grams/litre of approved brand and manufracture, including applying addition coats wherever required to achieve even shadeand colour.Twocoatsas per specifications and as per directions of Engineerin charge. (VOL -2 PG -50. ITEM NO - 8.54.2) Sqm 118.97 118.97 146.94 False None None False None False 17481.4518 0 3043771 102853 None code55 SF - Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications.( VOL-2 PG- 100. ITEM NO- 12.13.1) Sqm 105830.87 105830.87 0.61 False None None False None False 64556.8307 0 3043772 102853 None code56 SF - Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ( Vol-2 Pg 104. ITEM NO - 12.51 Nos 1088.14 1088.14 9.0 False None None False None False 9793.26 0 3043773 102853 None code57 GF - Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately) Size 62 x 100mm. ( VOL 2 PG - 111 ITEM NO - 12.93.1) m 737.1 737.1 60.6 False None None False None False 44668.26 0 3043774 102853 None code58 FF - Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately) Size 62 x 100mm. ( VOL 2 PG - 111 ITEM NO - 12.93.1) m 744.47 744.47 70.7 False None None False None False 52634.029 0 3043775 102853 None code59 SF - Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately) Size 62 x 100mm. ( VOL 2 PG - 111 ITEM NO - 12.93.1) m 751.84 751.84 70.7 False None None False None False 53155.088 0 3043776 102853 None code60 SF - Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 30 mm thick both side commercial. (VOL - 2 PG -105. ITEM NO - 12.57.3) Sqm 3218.36 3218.36 21.6 False None None False None False 69516.576 0 3043777 102853 None code61 GF - Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately) 30 mm thickness. ( VOL - 2 . ITEM NO - 12.94.1) Sqm 3659.25 3659.25 19.35 False None None False None False 70806.4875 0 3043778 102853 None code62 FF - Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately) 30 mm thickness. ( VOL - 2 . ITEM NO - 12.94.1) Sqm 3695.84 3695.84 22.58 False None None False None False 83452.0672 0 3043779 102853 None code63 SF - Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately) 30 mm thickness. ( VOL - 2 . ITEM NO - 12.94.1) Sqm 3732.44 3732.44 22.58 False None None False None False 84278.4952 0 3043780 102853 None code64 SF - Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 100x58x1.90mm. (VOL - 2 PG -105. ITEM NO - 12.74.2) Nos 97.46 97.46 40.0 False None None False None False 3898.4 0 3043781 102853 None code65 SF - Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete (VOL - 2 PG -107. ITEM NO - 12.63) Nos 139.23 139.23 22.0 False None None False None False 3063.06 0 3043782 102853 None code66 SF - Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete. (VOL - 2 PG - 105. ITEM NO - 12.62) Nos 253.83 253.83 22.0 False None None False None False 5584.26 0 3043783 102853 None code67 SF - Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. (VOL - PG 105. ITEM NO - 12.58) Nos 128.52 128.52 9.0 False None None False None False 1156.68 0 3043784 102853 None code68 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. (VOL - 2 PG 105. ITEM NO - 12.59) Nos 1193.09 1193.09 9.0 False None None False None False 10737.81 0 3043785 102853 None code69 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. (VOL- 2 PG 105 .ITEM NO - 12.60) Nos 1126.69 1126.69 22.0 False None None False None False 24787.18 0 3043786 102853 None code70 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 6125.05 6125.05 15.6 False None None False None False 95550.78 0 3043787 102853 None code71 SF - Providing & fixing of 3-track x 2-panel sliding windows with mesquito mesh made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ( VOL - 2 PG - 110. ITEM NO - 12.90) Nos 7212.11 7212.11 66.6 False None None False None False 480326.526 0 3043788 102853 None code72 HEADROOM - Providing & fixing of 3-track x 2-panel sliding windows with mesquito mesh made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ( VOL - 2 PG - 110. ITEM NO - 12.90) Nos 7282.82 7282.82 2.78 False None None False None False 20246.2396 0 3043789 102853 None code73 SF - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. (VOL -2 PG-86. ITEM NO - 11.34B) Kg 195.99 195.99 1678.32 False None None False None False 328933.9368 0 3043790 102853 None code74 OHT - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. (VOL -2 PG-86. ITEM NO - 11.34B) Kg 195.99 195.99 1543.5 False None None False None False 302510.565 0 3043791 102853 None code75 SF - Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ( VOL - 2 PG-46. ITEM NO - 8.30) Sqm 186.35 186.35 478.1 False None None False None False 89093.935 0 3043792 102853 None code76 TERRACE - Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ( VOL - 2 PG-46. ITEM NO - 8.30) Sqm 188.18 188.18 375.19 False None None False None False 70603.2542 0 3043793 102853 None code77 SF - Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (VOL -2 PG - 47. ITEM NO - 8.34.3) Sqm 53.55 53.55 66.6 False None None False None False 3566.43 0 3043794 102853 None code78 SF - Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (VOL- 2 PG 47. ITEM NO - 8.34.1) Sqm 56.76 56.76 48.6 False None None False None False 2758.536 0 3043795 102853 None code79 SF - Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (VOL- 2 PG- 48 ITEM NO- 8.40) Sqm 123.17 123.17 115.2 False None None False None False 14189.184 0 3043796 102853 None code80 SF - Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. (VOL - 2 PG 64. ITEM NO - 9.30) Sqm 5706.29 5706.29 26.55 False None None False None False 151501.9995 0 3043797 102853 None code81 SF - Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. (VOL -2 PG - 69. ITEM NO - 10.2) Sqm 351.29 351.29 41.4 False None None False None False 14543.406 0 3043798 102853 None code82 SF - Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (VOL - 2 PG - 85. ITEM NO -11.28) Sqm 605.12 605.12 161.28 False None None False None False 97593.7536 0 3043799 102853 None code83 GF - Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. (VOL - 2 PG 64. ITEM NO - 9.30) Sqm 5594.4 5594.4 32.83 False None None False None False 183664.152 0 3043800 102853 None code84 GF - Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re-inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis) (VOL - 2 PG- 150. ITEM NO - 15.7) Sqm 645.75 645.75 51.0 False None None False None False 32933.25 0 3043801 102853 None code85 FF - Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re-inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis) (VOL - 2 PG- 150. ITEM NO - 15.7) Sqm 652.21 652.21 54.0 False None None False None False 35219.34 0 3043802 102853 None code86 SF - Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re-inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis) (VOL - 2 PG- 150. ITEM NO - 15.7) Sqm 658.67 658.67 65.22 False None None False None False 42958.4574 0 3043803 102853 None code87 TERRACE - Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re-inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis) (VOL - 2 PG- 150. ITEM NO - 15.7) Sqm 665.12 665.12 465.0 False None None False None False 309280.8 0 3043804 102853 None code88 TOILET - Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. (VOL - PG 149. ITEM NO - 15.1) Sqm 875.01 875.01 101.24 False None None False None False 88586.0124 0 3043805 102853 None code89 TERRACE - Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(VOL -2 PG - 82. ITEM NO - 11.5.1) Sqm 4703.05 4703.05 2.1 False None None False None False 9876.405 0 3043806 102853 None code90 TERRACE -Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.VOL- 2 PG - 82. ITEM NO - 11.16.2) Kg 158.98 158.98 2236.65 False None None False None False 355582.617 0 3043807 102853 None code91 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (VOL - 2 PG - 26. ITEM NO - 7.38) Sqm 614.29 614.29 74.56 False None None False None False 45801.4624 0 3043808 102853 None code92 Providing and laying flooring with burnt stone slabs 10 cms thick rough chistle dressed on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 including cost of materials, mortar, labour, curing complete as per specifications. Sqm 2507.4 2507.4 6.0 False None None False None False 15044.4 0 3043809 102853 None code93 INTERNAL PLUMBING - Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.(VOL-2 PG 131.ITEM NO - 14.1) Nos 5128.2 5128.2 5.0 False None None False None False 25641.0 0 3043810 102853 None code94 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid. (VOL-2-PG-131. ITEM NO - 14.3) Nos 6275.85 6275.85 1.0 False None None False None False 6275.85 0 3043811 102853 None code95 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: using White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer. (VOL-2 PG-133. ITEM NO - 14.7A) Nos 4327.05 4327.05 8.0 False None None False None False 34616.4 0 3043812 102853 None code96 Providing and fixing unplasticised PVC connection pipe with brass unions : 20mm normal bore.( Nos 115.5 115.5 8.0 False None None False None False 924.0 0 3043813 102853 None code97 Providing and fixing Soap dish wired with 200mm width made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Economy. (Vol- 2 Pg-145. 14.92 a) Nos 718.0 718.0 8.0 False None None False None False 5744.0 0 3043814 102853 None code98 Providing and fixing brass bib cock of approved quality .(VOL-2 PG-117. ITEM NO - 13.3) Nos 5128.2 5128.2 1.0 False None None False None False 5128.2 0 3043815 102853 None code99 Providing and fixing brass bib cock of approved quality .15 MM NOMINAL BORE(VOL-2 PG-117. ITEM NO - 13.3.1) Nos 313.95 313.95 10.0 False None None False None False 3139.5 0 3043816 102853 None code100 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g.(Vol- 2 Pg-137. ITEM NO - 14.40.2) Nos 520.8 520.8 8.0 False None None False None False 4166.4 0 3043817 102853 None code101 Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. Note: Upto 110mm dia Coil shall be used. For Grade PE80 PN6.0 : HDPE Grade PE80-PN6.0, 110mm dia Mtr 489.64 489.64 70.0 False None None False None False 34274.8 0 3043818 102853 None code102 Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. Note: Upto 110mm dia Coil shall be used. For Grade PE80 PN6.0 : HDPE Grade PE80-PN6.0, 90mm dia Mtr 334.87 334.87 50.0 False None None False None False 16743.5 0 3043819 102853 None code103 Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0cm X 4.0 cm with all fitting arrangements & all necessary accessories complete.(VOL- 2 -PG 128. ITEM NO- 13.63) Nos 251.32 251.32 4.0 False None None False None False 1005.28 0 3043820 102853 None code104 EXTERNAL PLUMBING - Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fitting including fixing the pipe with clamps at 1.00m spacing. This including jointing of pipes & fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.( VOL- 2 PG- 122 ITEM NO - 13.32.2). 20mm nominal dia Pipes Mtr 397.95 397.95 70.0 False None None False None False 27856.5 0 3043821 102853 None code105 Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fitting including fixing the pipe with clamps at 1.00m spacing. This including jointing of pipes & fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.( VOL- 2 PG- 122 ITEM NO - 13.32.3). 25mm nominal dia Pipes Mtr 500.85 500.85 10.0 False None None False None False 5008.5 0 3043822 102853 None code106 Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fitting including fixing the pipe with clamps at 1.00m spacing. This including jointing of pipes & fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.( VOL- 2 PG- 122 ITEM NO - 13.32.4). 32mm nominal dia Pipes Mtr 584.85 584.85 10.0 False None None False None False 5848.5 0 3043823 102853 None code107 Providing and fixing Brass full way valve gate with C.I wheel of approved quality (screwed end). 32MM DIA. (VOL 2 PG - 117. ITEM NO - 13.4.2) Nos 627.9 627.9 4.0 False None None False None False 2511.6 0 3043824 102853 None code108 Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fitting including fixing the pipe with clamps at 1.00m spacing. This including jointing of pipes & fitting with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall. (VOL-2 PG- 122. ITEM NO - 13.31.3) 25MM NOMINAL DIA PIPES. Mtr 333.9 333.9 70.0 False None None False None False 23373.0 0 3043825 102853 None code109 Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fitting including fixing the pipe with clamps at 1.00m spacing. This including jointing of pipes & fitting with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall. (VOL-2 PG- 122. ITEM NO - 13.31.6) 50MM NOMINAL DIA PIPES. Mtr 820.05 820.05 30.0 False None None False None False 24601.5 0 3043826 102853 None code110 Providing and fixing Brass full way valve gate with C.I wheel of approved quality (screwed end). 25MM DIA. (VOL 2 PG - 117. ITEM NO - 13.4.1) Mtr 549.0 549.0 2.0 False None None False None False 1098.0 0 3043827 102853 None code111 Providing and fixing Brass full way valve gate with C.I wheel of approved quality (screwed end). 25MM DIA. (VOL 2 PG - 117. ITEM NO - 13.4.4) Mtr 855.0 855.0 2.0 False None None False None False 1710.0 0 3043828 102853 None code112 Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments. SIZE 50 MM (162 -P260A) Nos 1338.75 1338.75 2.0 False None None False None False 2677.5 0 3043829 102853 None code113 Water purification plants: Providing, Installation and Commissioning of automatic Water purification plant (RO+UF) with all accessories piping, product water tank on single phase power supply as per the enclosed detailed Technical Specifications including cost of material, loading and unloading and as directed by the Engineer in charge. (Ref- detailed specification enclosed seperatly). Note:- 1.The above rates mentioned are only for the preparation of estimate purpose. 2. All items are to be of BSI /NFS standards,with BSI / NFS mark . 3. Tenders to be invited for procurement. 4. No direct payment should be made under any situation or condition or on any account. 5. After commissioning of plant necessary testing to be done for the satisfactory of Engineer Incharge. Note : Refer the ANNEXURE : F for Detailed Specification of Each components. (VOL - 5 PG - 247. ITEM NO -21.1.5)For 150 LPH : Cabin Type. Nos 138600.0 138600.0 1.0 False None None False None False 138600.0 0 3043830 102853 None code114 COMPOUND WALL - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work (UNI SR Volume-1) In all kinds of soils Depth upto 3 m. (VOL-1 PG - 8 ITEM NO - 1.14.1) Cum 107.1 107.1 10.05 False None None False None False 1076.355 0 3043831 102853 None code115 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work (UNI SR Volume-1).( VOL - 1 PG - 8 . ITEM NO - 1.13) Cum 380.1 380.1 4.31 False None None False None False 1638.231 0 3043832 102853 None code116 Cost of Haulage Excluding Loading and Unloading, Case-II : Unsurfaced Gravelled Road D) Taking output 32 t load and lead 10 km = 320 t.km. Cum 7.35 7.35 11.49 False None None False None False 84.4515 0 3043833 102853 None code117 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work.( VOL- 1 -PG -7 ITEM NO - 1.80) Cum 497.7 497.7 1.6 False None None False None False 796.32 0 3043834 102853 None code118 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates. (VOL-1 PG - 15. ITEM NO - 2.1.4) Cum 6527.85 6527.85 0.6 False None None False None False 3916.71 0 3043835 102853 None code119 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.( VOL -1 PG 7 ITEM NO - 1.90) Cum 279.3 279.3 11.19 False None None False None False 3125.367 0 3043836 102853 None code120 RCC FOOTING - Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (VOL -1 PG -15 ITEM NO - 2.2.3) Cum 7185.02 7185.02 0.97 False None None False None False 6969.4694 0 3043837 102853 None code121 RCC BEAM - Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (VOL -1 PG -15 ITEM NO - 2.2.3) Cum 9979.2 9979.2 0.72 False None None False None False 7185.024 0 3043838 102853 None code122 RCC COLUMN - Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (VOL -1 PG -15 ITEM NO - 2.2.3) Cum 11309.76 11309.76 2.46 False None None False None False 27822.0096 0 3043839 102853 None code123 RCC RETAINING WALL - Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (VOL -1 PG -15 ITEM NO - 2.2.3) Cum 7318.08 7318.08 0.4 False None None False None False 2927.232 0 3043840 102853 None code124 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.(vol -II- pg 17. ITEM NO -6.33) Sqm 1292.55 1292.55 12.0 False None None False None False 15510.6 0 3043841 102853 None code125 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates.(vol -1 - 15. ITEM NO- 2.1.4) Cum 6527.85 6527.85 0.12 False None None False None False 783.342 0 3043842 102853 None code126 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. VOL- 2 PG - 42 ITEM NO- 8.8) Cum 389.55 389.55 31.6 False None None False None False 12309.78 0 3043843 102853 None code127 Providing Thermo-Mechanically Treated bars of grade Fe-550D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately). (VOL -1 PG 18. ITEM NO -2.11a) Kg 93.93 93.93 586.05 False None None False None False 55047.6765 0 3043844 102853 None code128 Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 142.8 142.8 576.0 False None None False None False 82252.8 0 3043845 102853 None code129 Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. on steel work including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Enginer-in-charge.( VOL-2 PG -47. ITEM NO. 8.36.1) Sqm 184.8 184.8 28.8 False None None False None False 5322.24 0 3043846 102853 None code130 ELECTRICAL Supplying heavy gauge PVC conduit pipe …….dia confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall stone structure or rawl plugs in case of brick walls and cement plastering damaged portion using heavy gauge saddles at an interval of 700mm using NF screws.- 19/20mm dia 2mm thick Mtr 69.0 69.0 15.0 False None None False None False 1035.0 0 3043847 102853 None code131 Supplying heavy gauge PVC conduit pipe …….dia confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall stone structure or rawl plugs in case of brick walls and cement plastering damaged portion using heavy gauge saddles at an interval of 700mm using NF screws.- 25mm dia 2mm thick Mtr 81.0 81.0 100.0 False None None False None False 8100.0 0 3043848 102853 None code132 Supplying heavy gauge PVC conduit pipe …….dia confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall stone structure or rawl plugs in case of brick walls and cement plastering damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. - 32mm dia 2.5mm thick Mtr 106.0 106.0 5.0 False None None False None False 530.0 0 3043849 102853 None code133 Concealed Conduit System - Supplying heavy PVC condiuit pipe ……mm dia ......mm thick confirming to IS 2509 woth suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary - 19/20mm dia 2mm thick Mtr 66.0 66.0 100.0 False None None False None False 6600.0 0 3043850 102853 None code134 Concealed Conduit System - Supplying heavy PVC condiuit pipe ……mm dia ......mm thick confirming to IS 2509 woth suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary - 25mm dia 2mm thick Mtr 78.0 78.0 229.0 False None None False None False 17862.0 0 3043851 102853 None code135 Concealed Conduit System - Supplying heavy PVC condiuit pipe ……mm dia ......mm thick confirming to IS 2509 woth suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary - 32mm dia 2.5mm thick Mtr 103.0 103.0 5.0 False None None False None False 515.0 0 3043852 102853 None code136 Supplying heavy gauge PVC Conduit Pipe ….dia …..mm thick with suitable size bends, metal junction boxes adhesive paste etx., by groove cutting in the wall and fixing by using U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. - 19/20mm dia 2mm thick Mtr 68.0 68.0 80.0 False None None False None False 5440.0 0 3043853 102853 None code137 Supplying heavy gauge PVC Conduit Pipe ….dia …..mm thick with suitable size bends, metal junction boxes adhesive paste etx., by groove cutting in the wall and fixing by using U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. - 25mm dia 2mm thick Mtr 79.0 79.0 90.0 False None None False None False 7110.0 0 3043854 102853 None code138 Supplying heavy gauge PVC Conduit Pipe ….dia …..mm thick with suitable size bends, metal junction boxes adhesive paste etx., by groove cutting in the wall and fixing by using U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. - 32mm dia 2.5mm thick Mtr 99.0 99.0 5.0 False None None False None False 495.0 0 3043855 102853 None code139 Supplying and fixing PVC/metal conduit deep junction box - 19/20mm junction box Each 49.0 49.0 1.0 False None None False None False 49.0 0 3043856 102853 None code140 Supplying and fixing PVC/metal conduit deep junction box -25mm junction box Each 56.0 56.0 1.0 False None None False None False 56.0 0 3043857 102853 None code141 Supplying and fixing PVC/metal conduit deep junction box - 32mm junction box Each 61.0 61.0 1.0 False None None False None False 61.0 0 3043858 102853 None code142 Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing the wall up to wall surface complete. - up to 50mm conduit in brick wall Mtr 29.0 29.0 2.0 False None None False None False 58.0 0 3043859 102853 None code143 Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing the wall up to wall surface complete. - up to 50mm conduit CC floor Mtr 69.0 69.0 2.0 False None None False None False 138.0 0 3043860 102853 None code144 Supplying PVC/Gi Flexible conduit pipe.. Mm dia fxing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddies at an interval of 300mm using NF screws on the either end of the pipe terminated completely. - 20mm Mtr 19.0 19.0 1.0 False None None False None False 19.0 0 3043861 102853 None code145 Supplying PVC/Gi Flexible conduit pipe.. Mm dia fxing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddies at an interval of 300mm using NF screws on the either end of the pipe terminated completely. - 25mm Mtr 22.0 22.0 1.0 False None None False None False 22.0 0 3043862 102853 None code146 Supplying PVC/Gi Flexible conduit pipe.. Mm dia fxing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddies at an interval of 300mm using NF screws on the either end of the pipe terminated completely. - 32mm Mtr 29.0 29.0 1.0 False None None False None False 29.0 0 3043863 102853 None code147 Supply and Fixing "S" Hook made out of 14mm dia M.S Rod. No 52.0 52.0 1.0 False None None False None False 52.0 0 3043864 102853 None code148 Suppling and Fixing M.S Rafter Clamp Set Made out of M.S Flat & 14mm M.S rod. No 160.0 160.0 1.0 False None None False None False 160.0 0 3043865 102853 None code149 Supplyin and Fixing Metal Fan Box with Round Hook. No 117.0 117.0 17.0 False None None False None False 1989.0 0 3043866 102853 None code150 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0sqmm (Earthwire) FRLSmultistrand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. - Short point up to 3Mtr from tapping point to out let via switch Point 269.0 269.0 5.0 False None None False None False 1345.0 0 3043867 102853 None code151 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0sqmm (Earthwire) FRLSmultistrand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. - Medium point above 3mtr up to 6Mtr from tapping point to out let via switch Point 379.0 379.0 20.0 False None None False None False 7580.0 0 3043868 102853 None code152 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0sqmm (Earthwire) FRLSmultistrand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. - Above 6Mtr up to 10Mtr from tapping Point to out let via switch Point 555.0 555.0 35.0 False None None False None False 19425.0 0 3043869 102853 None code153 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0sqmm (Earthwire) FRLSmultistrand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. - Two outlet in a row, above 3Mtr up to 6Mtr from tapping point to out let via switches Point 677.0 677.0 20.0 False None None False None False 13540.0 0 3043870 102853 None code154 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0sqmm (Earthwire) FRLSmultistrand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. - Three outlet in a row, above 6Mts up to 10Mtr from tapping point to out let via switches Point 989.0 989.0 5.0 False None None False None False 4945.0 0 3043871 102853 None code155 Wiring for lighting/Power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper With Low conductor resistance single core wire in open or conceanled system of wiring with specified - 1.5 sqmm Mtr 26.0 26.0 400.0 False None None False None False 10400.0 0 3043872 102853 None code156 Wiring for lighting/Power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper With Low conductor resistance single core wire in open or conceanled system of wiring with specified - 2.5 sqmm Mtr 42.0 42.0 840.0 False None None False None False 35280.0 0 3043873 102853 None code157 Wiring for lighting/Power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper With Low conductor resistance single core wire in open or conceanled system of wiring with specified - 4 sqmm Mtr 63.0 63.0 490.0 False None None False None False 30870.0 0 3043874 102853 None code158 Wiring for lighting/Power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper With Low conductor resistance single core wire in open or conceanled system of wiring with specified - 6 sqmm Mtr 92.0 92.0 40.0 False None None False None False 3680.0 0 3043875 102853 None code159 Wiring for lighting/Power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper With Low conductor resistance single core wire in open or conceanled system of wiring with specified - 10 sqmm Mtr 167.0 167.0 1.0 False None None False None False 167.0 0 3043876 102853 None code160 Wiring for lighting/Power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper With Low conductor resistance single core wire in open or conceanled system of wiring with specified - 16 sqmm Mtr 318.0 318.0 1.0 False None None False None False 318.0 0 3043877 102853 None code161 Supplying and drawing flexible Multicore Cable Manufactured with electrolytic grade copper with flexible copper with low conductor resistance confirming to table 3class 5 of IS:8130-1984 and (virgin) PVC insulation and sheathed suitable for working voltage upto 1100Volts with specified IS-694:1990 & confirming to the attached - 2c x 1.5Sqmm Mtr 53.0 53.0 1.0 False None None False None False 53.0 0 3043878 102853 None code162 Supplying and drawing flexible Multicore Cable Manufactured with electrolytic grade copper with flexible copper with low conductor resistance confirming to table 3class 5 of IS:8130-1984 and (virgin) PVC insulation and sheathed suitable for working voltage upto 1100Volts with specified IS-694:1990 & confirming to the attached - 3c x 1.5Sqmm Mtr 72.0 72.0 1.0 False None None False None False 72.0 0 3043879 102853 None code163 Supplying and flush mounting powder coated metal / galvanised metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall - 1-2Way Each 138.0 138.0 20.0 False None None False None False 2760.0 0 3043880 102853 None code164 Supplying and flush mounting powder coated metal / galvanised metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall - 3 Way Each 159.0 159.0 20.0 False None None False None False 3180.0 0 3043881 102853 None code165 Supplying and flush mounting powder coated metal / galvanised metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall - 4-5Way Each 177.0 177.0 5.0 False None None False None False 885.0 0 3043882 102853 None code166 Supplying and flush mounting powder coated metal / galvanised metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall - 6Way Each 220.0 220.0 5.0 False None None False None False 1100.0 0 3043883 102853 None code167 Supplying and flush mounting powder coated metal / galvanised metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall - 8Way Each 261.0 261.0 12.0 False None None False None False 3132.0 0 3043884 102853 None code168 Supplying and flush mounting powder coated metal / galvanised metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall - 10-12Way Each 319.0 319.0 10.0 False None None False None False 3190.0 0 3043885 102853 None code169 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. - 1 to 2 Module Each 137.0 137.0 20.0 False None None False None False 2740.0 0 3043886 102853 None code170 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. - 3Module Each 161.0 161.0 20.0 False None None False None False 3220.0 0 3043887 102853 None code171 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. - 4Moudule Each 175.0 175.0 5.0 False None None False None False 875.0 0 3043888 102853 None code172 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. - 6Moudule Each 234.0 234.0 5.0 False None None False None False 1170.0 0 3043889 102853 None code173 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. - 8Moudule Each 284.0 284.0 12.0 False None None False None False 3408.0 0 3043890 102853 None code174 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.- 12Moudule Each 344.0 344.0 10.0 False None None False None False 3440.0 0 3043891 102853 None code175 `Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. - 6Amps one way Switch. Each 102.0 102.0 70.0 False None None False None False 7140.0 0 3043892 102853 None code176 `Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. - 6Amps Two way Switch Each 166.0 166.0 2.0 False None None False None False 332.0 0 3043893 102853 None code177 `Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. - 6Amps 3 way 5 pin universal Socket Each 171.0 171.0 20.0 False None None False None False 3420.0 0 3043894 102853 None code178 `Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. - Stepped Fan Regulator. Each 357.0 357.0 17.0 False None None False None False 6069.0 0 3043895 102853 None code179 `Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. - 16 Amps SP switch with baklite Each 180.0 180.0 10.0 False None None False None False 1800.0 0 3043896 102853 None code180 `Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. - 6Amps Bell push Each 177.0 177.0 1.0 False None None False None False 177.0 0 3043897 102853 None code181 `Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. - 6/16Amps universal socket Each 236.0 236.0 10.0 False None None False None False 2360.0 0 3043898 102853 None code182 `Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. - Telephone socket Each 156.0 156.0 6.0 False None None False None False 936.0 0 3043899 102853 None code183 `Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. - TV socket Each 156.0 156.0 2.0 False None None False None False 312.0 0 3043900 102853 None code184 `Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. - RJ45/ I.O. outlet Each 337.0 337.0 4.0 False None None False None False 1348.0 0 3043901 102853 None code185 Supplying 4mm thick plastic sheet with necessary nitches for fixing switches regulators etc., and fixing on existing wooden or metal box using N.F. screws. Sq CM 8.0 8.0 50.0 False None None False None False 400.0 0 3043902 102853 None code186 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' cure, indicator ON/OFF, energy cross-3 with Short circuit breaking cappacity of 10K and complete wiring as required. Confirming to IEC 60898. - 6-32Amps SP Each 415.0 415.0 30.0 False None None False None False 12450.0 0 3043903 102853 None code187 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' cure, indicator ON/OFF, energy cross-3 with Short circuit breaking cappacity of 10K and complete wiring as required. Confirming to IEC 60898. - 6-32Amps TPN Each 1717.0 1717.0 1.0 False None None False None False 1717.0 0 3043904 102853 None code188 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' cure, indicator ON/OFF, energy cross-3 with Short circuit breaking cappacity of 10K and complete wiring as required. Confirming to IEC 60898. - 40Amps TPN Each 3044.0 3044.0 2.0 False None None False None False 6088.0 0 3043905 102853 None code189 Supplying and fixing regular MCB Distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG M.S enclosure. - 12Way SP & N Each 2329.0 2329.0 1.0 False None None False None False 2329.0 0 3043906 102853 None code190 Supplying and fixing regular MCB Distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG M.S enclosure. - 8Way TP & N Each 6091.0 6091.0 1.0 False None None False None False 6091.0 0 3043907 102853 None code191 Supplying fxing and wiring Earth Leakage Miniature Circuit Breaker [RCCB] 240/450V upto 300mA sensitvity on existing wood/panel - 16-25 Amps 2 pole Each 4277.0 4277.0 1.0 False None None False None False 4277.0 0 3043908 102853 None code192 Supplying fxing and wiring Earth Leakage Miniature Circuit Breaker [RCCB] 240/450V upto 300mA sensitvity on existing wood/panel - 32-40 Amps 2 pole Each 5147.0 5147.0 4.0 False None None False None False 20588.0 0 3043909 102853 None code193 Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. - LED light fitting 1 x 2' - 9/10 W Each 551.0 551.0 5.0 False None None False None False 2755.0 0 3043910 102853 None code194 Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. - LED light fitting 1 x 4' - 20/22 W Each 690.0 690.0 40.0 False None None False None False 27600.0 0 3043911 102853 None code195 Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition - LED square or round down light 5-6W Each 571.0 571.0 5.0 False None None False None False 2855.0 0 3043912 102853 None code196 Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition - LED square or round down light 15-18W Each 885.0 885.0 15.0 False None None False None False 13275.0 0 3043913 102853 None code197 Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition - 18W-20W (T8) Each 702.0 702.0 4.0 False None None False None False 2808.0 0 3043914 102853 None code198 Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. - 12" Sweep (300 mm) Each 2969.0 2969.0 2.0 False None None False None False 5938.0 0 3043915 102853 None code199 Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power input 48 W +/- 10 %, Rated current As per IS:374/79, Rated power factor 0.9 lagging(min), Rated speed 350 +/- 10% RPM, Rated air delivery 210 +/- 10% Cubic Meter Minimum, Rated service value 4.2 CMM / W, Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201, as per IS specification, Motor winding. Temp rise Shall not exceed 75 deg C over and ambient of 40 0C by resistance method at 245 V, Insulation resistance Shall not be less than Two Mega Ohms (2M Ohms), Leakage current Should not exceed 210 Micro Amp, Power input, W& current, Air Delivery & Fan Speed as per IS:374/1979 with latest amendment, 2 year manufacturer Warranty. - 48" Sweep 5 Star (1200 mm) Each 2677.0 2677.0 17.0 False None None False None False 45509.0 0 3043916 102853 None code200 Supplying wall mounting fan suitable to operate at singlephase 230v AC. supply. - 300 mm Sweep Each 2492.0 2492.0 3.0 False None None False None False 7476.0 0 3043917 102853 None code201 Supplying.....litres capacity vertical/horizontal type wall mounting Electrical water heater with 22 SWG copper/SS sheet metal inner Container tinned inside and anticorrosive paint outside and 20 SWG M.S. sheet metal outer cover filled with glass wool between inner and outer container for thermal insulation complete. The inlet and outlet pipes so arranged that water flow inside results in water to flow out from the inner container without turbulence. The Inner container shall have direct immersion type copper tube nickel plate. 2kW capacity element with a neon indicator fitted with 20A capacity 25 to 85 degree Centigrade range thermostat. The water heater shall completely be wired with 40/0.0076 inch 3 core copper flexible wire of 1.5 meters length and the outer container provided with heavy gauge brackets for wall mounting. - 25 L Each 10242.0 10242.0 3.0 False None None False None False 30726.0 0 3043918 102853 None code202 Erection charges for fixing a ... litres capacity wall mounting electric geysers using bolts, flat at one end nut and washers at the other end for through bolts and nuts and washers with 150x450x600mm back plate and wiring complete with 15A 3 pin top. - upto 30 Liters Each 698.0 698.0 3.0 False None None False None False 2094.0 0 3043919 102853 None code203 Supplying and drawing UTP-CAT 6E LAN cable. Mtr 38.0 38.0 25.0 False None None False None False 950.0 0 3043920 102853 None code204 Supplying and drawing PVC flexible one pair telepone unarmoured tinned copper cable. - 2 Pair Mtr 21.0 21.0 26.0 False None None False None False 546.0 0 3043921 102853 None code205 Supplying and drawing PVC flexible one pair telepone unarmoured tinned copper cable. - 20 Pair Mtr 81.0 81.0 5.0 False None None False None False 405.0 0 3043922 102853 None code206 Supplying and drawing PVC flexible one pair telepone unarmoured tinned copper cable. - Supplying and drawisng PVC insulated gas injected physical foam jelly flooded co-oxial TV cable.RG-6 Mtr 44.0 44.0 25.0 False None None False None False 1100.0 0 3043923 102853 None code207 Smart Surveillance System (CCTV): using PTZ & Fixed cameras, OFC monitoring system, HMI etc., as per specification PTZ Camera Specification: Lens type: Auto focus with Optical Zoom of 30x, Digital Zoom +10x Pan Angle: 360 degree endless Tilt Angle: 210 degree with e-flip or higher Zoom : 30x Optical and 12x Digital Mode :Day and Night Image size: Full HD Streaming: High speed Weather Proof: IP 66 compliant Network Protocol: TCP/IP should be compliant of any other protocol required. Connectivity : Cat 6 / Optical fibre Ethernet: 10Base-T/100Base-TX(RJ45) Power source : both self powered and externally powered No 67352.0 67352.0 5.0 False None None False None False 336760.0 0 3043924 102853 None code208 Fixing all types and all capacities of fluorescent /False ceiling/spot light /CFL/LED fittings indoor on the wall/ ceiling/rafters/girders using 23/0.0076' twin twisted PVC insulated wires, required Nos of round blocks and clamps. - On wall / ceiling /Rafter / Girders Each 122.0 122.0 70.0 False None None False None False 8540.0 0 3043925 102853 None code209 Fixing a Ceiling / Wall mounting fan of all capacities and all types to the existing 'S' hook wisth fan regulator to the existing board together wisth wupplying and fixing 5amps. Ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired. Each 315.0 315.0 17.0 False None None False None False 5355.0 0 3043926 102853 None code210 Fixing on e exhaust fan in the nitch already left in the wall with bolts and nuts and 5 amps. Ceiling rose wisth sufficient length of 23/0.0076 inch PVC insulated twincore wire. Each 492.0 492.0 5.0 False None None False None False 2460.0 0 3043927 102853 None code211 INTERNAL PLUMBING - Providing and fixing Testing and commissioning of CP Health faucet consisting of 1 No. 15mm dia CP Angle cock with wall flage.PVC flexible tube of 1m long tube with end nuts. Hand operated spray unit (instent type)CP Crutch etc, complete as directed by the Engineer in charge. Nos 1397.0 1397.0 5.0 False None None False None False 6985.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1710330416000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1710330416000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1710330416000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1710330424000 0 None None ELIGIBILITY The tender document is part and parcel of the agreement. None 1710330427000 0 None None ELIGIBILITY The contractor shall obtain insurance coverage for all the workers deployed for this work. None 1710330432000 0 None None ELIGIBILITY Further details of the work or any clarifications can be obtained from the office of the Executive Engineer (Central office), KHB, Cauvery Bhavan, K.G. Road, Bangalore Ph: 080-22273511 ext-317, None 1710330436000 0 None None ELIGIBILITY The intending bidders are requested to note that they should abide by the detailed instructions and conditions contained in the Tender documents and further modifications done if any. None 1710330439000 0 None None ELIGIBILITY Corrigendum/modification/corrections, if any, will be published in the e procurement Web sites only. None 1710330442000 0 None None ELIGIBILITY KHB reserves the right to withdraw or cancel this invitation to BID/Tender without assigning any reason whatsoever None 1710330446000 0 None None ELIGIBILITY The bidder shall study the Tender document Carefully and quote the rates None 1710330449000 0 None None ELIGIBILITY All scanned documents to be uploaded shall be in original and are to be produced to the Executive Engineer to verify the documents within 3 days from the day of opening of Technical bid for verification, if required. None 1710330452000 0 None None ELIGIBILITY Drawings uploaded are only for Tender Purpose only. None 1710330457000 0 None None ELIGIBILITY GST shall be added separately in the estimate. None 1710330462000 0 None None ELIGIBILITY GST shall be paid to the tendered amount separately. None 1710330466000 0 None None ELIGIBILITY The bidder should maintain register of laborers deployed and wages paid for the workers and shall produce the documents whenever called for by the competent authority. Remittance towards PF shall be commensurate with the labour component of the work involved. None 1710330469000 0 None None ELIGIBILITY The bidder shall give an undertaking that they would abide by the provisions of employees provident fund and shall remit PF of labourers to the respective PF offices or else KHB have the right to deduct the PF amount from the work bills and remit the same to respective PF offices. None 1710330474000 0 None None ELIGIBILITY The contractor shall quote his rates inclusive of PF as per the applicable rate as issued by the PF department from time to time None 1710330479000 0 None None ELIGIBILITY The successful bidder shall give an under taking that they would abide by the provisions of the Employees Provident Fund Act. None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs) None None None None None None Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender) None None None None None None Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction) None None None None None None Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx) None None None None None None Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period) None None None None None None Total value of civl engineering works executed and payments received in the last five years (year-wise) None None None None None None List of existing commitments and ongoing works None None None None None None List of works for which tenders already submitted None None None None None None Banker Details for reference None None None None None None Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded None None None None None None Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years None None None None None None Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded None None None None None None List of Financial Resources with Certificates None None None None None None To qualify for award of this contract , each tenderer in its name should have in the last five years achieved in at least two financial years a minimum financial turnover (In all classes of civil engineering construction works only) Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Scanned Copy of documentary proof for having executed similar nature of work not less than 50% of tender amount as defined in Government order No.FD 480 EXP-12/2014,Bangalore dated:19.07.2014 Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Scanned copy of Pre-qualification letter issued by Karnataka Housing Board. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Scanned copy of Pre-qualification letter issued by Karnataka Housing Board. None None None None As per Tender Documents KW-4 clause 3.3 key & critical equipments available. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- As per Tender Documents KW-4 clause 3.3 key & critical equipments available. None None None None Executed in any one Financial year, the minimum quantities of work as mentioned in tender document Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Executed in any one Financial year, the minimum quantities of work as mentioned in tender document None None None None Required valid electrical license for executing similar nature of work as per tender document Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Required valid electrical license for executing similar nature of work as per tender document None None None None The Tenderer should have executed similar water supply/sanitary engineering works as per tender document Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- The Tenderer should have executed similar water supply/sanitary engineering works as per tender document None None None None Income Tax returns & PAN Financial Status None createdTs version createdDate modifiedDate documentName None None None None ITR Filed Copy (Mentioning PAN) None None None None GST Registration Certificate Financial Status None createdTs version createdDate modifiedDate documentName None None None None GST Registration None None None None Scanned copy of latest GST clearance certificate. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Others -- Scanned copy of latest GST clearance certificate. None None None None Scanned copy of Credit lines/ letter of credit /Bankers certificate for at least 20% of amount put to tender in the current financial year on the name of work put to tender. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit None None None None Assessed Available Bid Capacity as per tender document Financial Status None createdTs version createdDate modifiedDate documentName None None None None Others -- Assessed Available Bid Capacity as per tender document None None None None Covering letter. Others Covering letter. createdTs version createdDate modifiedDate documentName None None None None Others -- Covering letter.
tenderCriterionDocumentList	documentName optional documentTypeText Annual Turnover Certificate True Technical Bid Company Registration Certificate False Technical Bid Reserved Category Certificate False Technical Bid Small Scale Industries Certificate False Technical Bid Work done certificate True Technical Bid key and critical equipment LIST True Technical Bid Income Tax returns & PAN no. True Technical Bid Pre-qualification certificate issued by KHB True Technical Bid GST clearance certificate True Technical Bid Credit lines/ letter of credit/Bankers certificate True Technical Bid Assessed available tender capacity calculation True Technical Bid Electrical license True Technical Bid Work done certificate with quantities True Technical Bid
tenderWorkLocationList
tenderAddress	createdTs 1710337042000 version 0 createdDate None modifiedDate None blockNumber CAUVERY BHAVAN 3RD FLOOR street None city Bengaluru state Karnataka pin 560009
tenderRecallDTO	None