| 3067065 | 104494 | None | code01 | Clearing and grubbing road land including uprooting rankvegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposalof unserviceable materials and stacking of serviceable materialto be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness.In area of light jungle | ha | 1256.63 | 1256.63 | 2.4 | False | None | None | False | None | False | 3015.912 | 0 |
| 3067066 | 104494 | None | code02 | Earth work in surface excavation by mechanical means for lowering & leveling the ground without blasting for all works other than foundation in Ordinary soil/Soft rock & depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the wor In Ordinary/Soft rock upto 300 mm depth. | Cum | 405.44 | 405.44 | 18.0 | False | None | None | False | None | False | 7297.92 | 0 |
| 3067067 | 104494 | None | code03 | Earth work excavation for Foundation by manual means for all Buildings, Bridges, Retaining walls, Abutment Piers and such similar works as per drawing and technical Specifications, including setting out, providing shoring & strutting,barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work. In all kinds of soils Depth upto 1.5 m | Cum | 208.32 | 208.32 | 86.34 | False | None | None | False | None | False | 17986.3488 | 0 |
| 3067068 | 104494 | None | code04 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | Cum | 297.92 | 297.92 | 142.59 | False | None | None | False | None | False | 42480.4128 | 0 |
| 3067069 | 104494 | None | code05 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates | Cum | 6343.68 | 6343.68 | 42.675 | False | None | None | False | None | False | 270716.544 | 0 |
| 3067070 | 104494 | None | code06 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm and down size graded crushed coarse aggregates | Cum | 6963.04 | 6963.04 | 5.4 | False | None | None | False | None | False | 37600.416 | 0 |
| 3067071 | 104494 | None | code07 | Providing Size Stone masonry with hard stone in foundation & plinth
with Cement mortar 1:6 (1 cement : 6 coarse sand) | Cum | 7155.68 | 7155.68 | 58.4775 | False | None | None | False | None | False | 418446.2772 | 0 |
| 3067072 | 104494 | None | code08 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm and down size graded crushed coarse aggregates | Cum | 10562.16 | 10562.16 | 5.31 | False | None | None | False | None | False | 56085.0696 | 0 |
| 3067073 | 104494 | None | code09 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes finsishing concrete structure in line, all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm and down size graded crushed coarse aggregates | Cum | 10268.55 | 10268.55 | 4.36 | False | None | None | False | None | False | 44770.878 | 0 |
| 3067074 | 104494 | None | code10 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes finsishing concrete structure in line, all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M20 Design Mix Using 20 mm and down size graded crushed coarse aggregates | Cum | 10622.64 | 10622.64 | 2.77 | False | None | None | False | None | False | 29424.7128 | 0 |
| 3067075 | 104494 | None | code11 | Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) | Kgs | 103.03 | 103.03 | 1195.41 | False | None | None | False | None | False | 123163.0923 | 0 |
| 3067076 | 104494 | None | code12 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. | Sqm | 1467.2 | 1467.2 | 311.0 | False | None | None | False | None | False | 456299.2 | 0 |
| 3067077 | 104494 | None | code13 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. | Sqm | 1236.48 | 1236.48 | 60.75 | False | None | None | False | None | False | 75116.16 | 0 |
| 3067078 | 104494 | None | code14 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 415.52 | 415.52 | 344.44 | False | None | None | False | None | False | 143121.7088 | 0 |
| 3067079 | 104494 | None | code15 | 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 390.88 | 390.88 | 416.6 | False | None | None | False | None | False | 162840.608 | 0 |
| 3067080 | 104494 | None | code16 | Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions
of Engineer-in-charge. | Sqm | 194.88 | 194.88 | 344.44 | False | None | None | False | None | False | 67124.4672 | 0 |
| 3067081 | 104494 | None | code17 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 142.24 | 142.24 | 461.6 | False | None | None | False | None | False | 65657.984 | 0 |
| 3067082 | 104494 | None | code18 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm | Sqm | 1282.4 | 1282.4 | 113.75 | False | None | None | False | None | False | 145873.0 | 0 |
| 3067083 | 104494 | None | code19 | Stainless Steel AISI-304(18/8) Wash basin 530x345 mm with single 15 mm C.P. brass pillar tap | Each | 4631.2 | 4631.2 | 10.0 | False | None | None | False | None | False | 46312.0 | 0 |
| 3067084 | 104494 | None | code20 | Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 110mm dia., 6 kg/sqcm & class 3 | Mtr | 460.32 | 460.32 | 100.0 | False | None | None | False | None | False | 46032.0 | 0 |
| 3067085 | 104494 | None | code21 | Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 75mm dia., 6 kg/sqcm & class 3 | Mtr | 246.4 | 246.4 | 100.0 | False | None | None | False | None | False | 24640.0 | 0 |
| 3067086 | 104494 | None | code22 | Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete. (internal work exposed on wall) - 25mm nominal OD pipes | Mtr | 219.52 | 219.52 | 142.5 | False | None | None | False | None | False | 31281.6 | 0 |
| 3067087 | 104494 | None | code23 | C.P. Brass long body bibcock 15 mm | Each | 700.0 | 700.0 | 10.0 | False | None | None | False | None | False | 7000.0 | 0 |
| 3067088 | 104494 | None | code24 | Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges. -do- with one side prelam | Sqm | 2284.8 | 2284.8 | 7.875 | False | None | None | False | None | False | 17992.8 | 0 |
| 3067089 | 104494 | None | code25 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge | Sqm | 4751.04 | 4751.04 | 15.75 | False | None | None | False | None | False | 74828.88 | 0 |
| 3067090 | 104494 | None | code26 | Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. | Kgs | 152.32 | 152.32 | 4009.25 | False | None | None | False | None | False | 610688.96 | 0 |
| 3067091 | 104494 | None | code27 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 636.16 | 636.16 | 262.5 | False | None | None | False | None | False | 166992.0 | 0 |
| 3067092 | 104494 | None | code28 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm) | Rmtr | 505.12 | 505.12 | 35.0 | False | None | None | False | None | False | 17679.2 | 0 |
| 3067093 | 104494 | None | code29 | Providing and placing on terrace (at all floors)Polyethylene water storage tank of specified capacity | Ltr | 10.08 | 10.08 | 5000.0 | False | None | None | False | None | False | 50400.0 | 0 |
| 3067094 | 104494 | None | code30 | Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.. | Each | 4744.32 | 4744.32 | 10.0 | False | None | None | False | None | False | 47443.2 | 0 |
| 3067095 | 104494 | None | code31 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For Fixed Portion :Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications. | Kgs | 558.88 | 558.88 | 324.0 | False | None | None | False | None | False | 181077.12 | 0 |
| 3067096 | 104494 | None | code32 | Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. | Kgs | 152.32 | 152.32 | 680.4 | False | None | None | False | None | False | 103638.528 | 0 |
| 3067097 | 104494 | None | code33 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid | Each | 6694.24 | 6694.24 | 5.0 | False | None | None | False | None | False | 33471.2 | 0 |
| 3067098 | 104494 | None | code34 | Providing and laying flooring and steps machine cut granite slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar labour, curing complete as per specifications. | Sqm | 4792.48 | 4792.48 | 15.0 | False | None | None | False | None | False | 71887.2 | 0 |
| 3067099 | 104494 | None | code35 | Providing and fixing 100mm thick precast RCC ring of 1.5m dia and 300mm depth with all necessary fittings complete, including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (Market rate = Sanc no: | Each | 3000.0 | 3000.0 | 40.0 | False | None | None | False | None | False | 120000.0 | 0 |
| 3067100 | 104494 | None | code36 | Open Conduit System Supplying heavy gauge PVC conduit pipe …….dia confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall stone structure or rawl plugs in case of brick walls and cement plastering damaged portion using heavy gauge saddles at an interval of 700mm using NF screws.
19/20mm dia 2mm thick | Per Mtr | 68.0 | 68.0 | 225.0 | False | None | None | False | None | False | 15300.0 | 0 |
| 3067101 | 104494 | None | code37 | 25 mm dia 2mm thick | Per Mtr | 80.0 | 80.0 | 100.0 | False | None | None | False | None | False | 8000.0 | 0 |
| 3067102 | 104494 | None | code38 | Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1-3Way | Each | 123.0 | 123.0 | 10.0 | False | None | None | False | None | False | 1230.0 | 0 |
| 3067103 | 104494 | None | code39 | 4-5Way | Each | 138.0 | 138.0 | 15.0 | False | None | None | False | None | False | 2070.0 | 0 |
| 3067104 | 104494 | None | code40 | 10-12Way | Each | 325.0 | 325.0 | 5.0 | False | None | None | False | None | False | 1625.0 | 0 |
| 3067105 | 104494 | None | code41 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 to 3 Moudule | Each | 152.0 | 152.0 | 10.0 | False | None | None | False | None | False | 1520.0 | 0 |
| 3067106 | 104494 | None | code42 | 4 Module | Each | 175.0 | 175.0 | 15.0 | False | None | None | False | None | False | 2625.0 | 0 |
| 3067107 | 104494 | None | code43 | 12 Moudule | Each | 363.0 | 363.0 | 5.0 | False | None | None | False | None | False | 1815.0 | 0 |
| 3067108 | 104494 | None | code44 | Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using copper PVC insulated multi strand 2x1.5Sqmm copper wire without switch, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.
2.1.1 Short point up to 3Mtr from tapping point to out let via switch box | Each | 276.0 | 276.0 | 10.0 | False | None | None | False | None | False | 2760.0 | 0 |
| 3067109 | 104494 | None | code45 | 2.1.2 Medium point up to 3Mtr upto 6m from tapping point to out let via switch box | Each | 386.0 | 386.0 | 10.0 | False | None | None | False | None | False | 3860.0 | 0 |
| 3067110 | 104494 | None | code46 | 2.1.3 Medium point up to 6Mtr upto 10m from tapping point to out let via switch box | Each | 567.0 | 567.0 | 15.0 | False | None | None | False | None | False | 8505.0 | 0 |
| 3067111 | 104494 | None | code47 | Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate.
3.7.1 6Amps one way. | Each | 88.0 | 88.0 | 50.0 | False | None | None | False | None | False | 4400.0 | 0 |
| 3067112 | 104494 | None | code48 | 3.7.3 6Amps 3way socket. | Each | 152.0 | 152.0 | 20.0 | False | None | None | False | None | False | 3040.0 | 0 |
| 3067113 | 104494 | None | code49 | Stepped Fan Regulator. | Each | 313.0 | 313.0 | 10.0 | False | None | None | False | None | False | 3130.0 | 0 |
| 3067114 | 104494 | None | code50 | 3.7.9 32Amps DP switch | Each | 375.0 | 375.0 | 25.0 | False | None | None | False | None | False | 9375.0 | 0 |
| 3067115 | 104494 | None | code51 | 3.7.10 6/16Amps universal socket | Each | 249.0 | 249.0 | 25.0 | False | None | None | False | None | False | 6225.0 | 0 |
| 3067116 | 104494 | None | code52 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper With low conductor resistance single core cable in open or concealed system of wiring with specified IS 694:1990 & Conforming to GTP of GROUP-A 1.5 sqmm | Per Mtr | 26.0 | 26.0 | 600.0 | False | None | None | False | None | False | 15600.0 | 0 |
| 3067117 | 104494 | None | code53 | 2.5 sqmm | Per Mtr | 40.0 | 40.0 | 1000.0 | False | None | None | False | None | False | 40000.0 | 0 |
| 3067118 | 104494 | None | code54 | 4 sqmm | Per Mtr | 59.0 | 59.0 | 500.0 | False | None | None | False | None | False | 29500.0 | 0 |
| 3067119 | 104494 | None | code55 | Supplying & Fixing of 70-150 Watts lamp holder 2 Pin | Each | 118.0 | 118.0 | 20.0 | False | None | None | False | None | False | 2360.0 | 0 |
| 3067120 | 104494 | None | code56 | Supplying and fixing regular MCB distribution boards on wall / woodboard/flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting etc., complete. II - Double Door, 4 Way TP &N | Each | 3053.0 | 3053.0 | 5.0 | False | None | None | False | None | False | 15265.0 | 0 |
| 3067121 | 104494 | None | code57 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K and coomplete wiring as required. 50-63Amps DP | Each | 1376.0 | 1376.0 | 15.0 | False | None | None | False | None | False | 20640.0 | 0 |
| 3067122 | 104494 | None | code58 | Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with
double ball bearing system
48" Sweep (1200 mm) Regular model | Each | 2085.0 | 2085.0 | 10.0 | False | None | None | False | None | False | 20850.0 | 0 |
| 3067123 | 104494 | None | code59 | Fixing a ceiling/Wall mounting fan of all capacities and all types to the existing S hook with fan regulator to the existing board together with supplying and fixing a 5 amperes ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring completely. | Each | 162.0 | 162.0 | 10.0 | False | None | None | False | None | False | 1620.0 | 0 |
| 3067124 | 104494 | None | code60 | Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit should be filled with equal proprotion of salt and charcoal 150mm alround the pipe to complete depth. The connection from the pipe to the conduit etc, is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and checknuts etc, the pipe shall have 16 through holes of 122 mm dia.(68/1) | No | 2999.7 | 2999.7 | 5.0 | False | None | None | False | None | False | 14998.5 | 0 |
| 3067125 | 104494 | None | code61 | Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc. GI STRIP
25X3mm | Mtr | 75.0 | 75.0 | 100.0 | False | None | None | False | None | False | 7500.0 | 0 |
| 3067126 | 104494 | None | code62 | Supplying of feet PVC Batten with integrated LED tube .W with high quality diffuser with Life of 25000 burning hours & 70 lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 2 - 9/10 W | Each | 496.0 | 496.0 | 25.0 | False | None | None | False | None | False | 12400.0 | 0 |
| 3067127 | 104494 | None | code63 | Fixing all types and all capacities fluorescent/false ceiling/spot light/ CFL fittings indoor on the wall /ceiling/rafters/girders using 23/ 0.0076 twin twisted PVC insulated wires, required nos of round blocks and clamps (if required). a) On wa/ceiling/Rafter/Girders | Each | 119.0 | 119.0 | 100.0 | False | None | None | False | None | False | 11900.0 | 0 |
| 3067128 | 104494 | None | code64 | Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.(23/22) 12" Sweep (300mm) 12" Sweep (300mm), a.Group 'A' | Each | 2997.0 | 2997.0 | 5.0 | False | None | None | False | None | False | 14985.0 | 0 |
| 3067129 | 104494 | None | code65 | Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 amps ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make. | Each | 432.0 | 432.0 | 5.0 | False | None | None | False | None | False | 2160.0 | 0 |
| 3067130 | 104494 | None | code66 | Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5to 20A single phase Class-Accuracy with Temper Proof Energy Meter. | Each | 1242.0 | 1242.0 | 5.0 | False | None | None | False | None | False | 6210.0 | 0 |
| 3067131 | 104494 | None | code67 | Wiring for lighting/power circuit using one of PVC insulated
1100V grade, stranded Aluminium wire single core in open or concealed system of wiring.
10 sqmm | Mtr | 17.0 | 17.0 | 400.0 | False | None | None | False | None | False | 6800.0 | 0 |