| 3030968 | 102138 | None | Vol 1 Pg No8 I.No 1.14.1 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m ---- including equipments and all other incidental charges | Cum | 102.0 | 102.0 | 12.54 | False | None | None | False | None | False | 1279.08 | 0 |
| 3030969 | 102138 | None | Vol 1 Pg no 15 I.No 2.1.4 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates ---- including equipments and all other incidental charges | Cum | 6217.0 | 6217.0 | 2.28 | False | None | None | False | None | False | 14174.76 | 0 |
| 3030970 | 102138 | None | Vol 2 Pg no 09 I No 5.1.1 | Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand) ---- including equipments and all other incidental charges | Cum | 5611.0 | 5611.0 | 7.7 | False | None | None | False | None | False | 43204.7 | 0 |
| 3030971 | 102138 | None | Vol 1 Pg No 09 I No 2.4.1 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates ---- including equipments and all other incidental charges | Cum | 6404.0 | 6404.0 | 2.45 | False | None | None | False | None | False | 15689.8 | 0 |
| 3030972 | 102138 | None | Vol 1 Pg No 18 I No 2.11 a | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification For Buildings ---- including equipments and all other incidental charges | Tonne | 89457.0 | 89457.0 | 0.16 | False | None | None | False | None | False | 14313.12 | 0 |
| 3030973 | 102138 | None | Vol 2 Pg no 13 I No 6.7 | Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of
work ---- including equipments and all other incidental charges | Cum | 8211.0 | 8211.0 | 13.93 | False | None | None | False | None | False | 114379.23 | 0 |
| 3030974 | 102138 | None | Vol 2 pg no 43 I No 8.10 | Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge ---- including equipments and all other incidental charges | Sqm | 211.0 | 211.0 | 22.8 | False | None | None | False | None | False | 4810.8 | 0 |
| 3030975 | 102138 | None | Vol 2 pg no 41 I No 8.1.1 | Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge ---- including equipments and all other incidental charges | Sqm | 255.0 | 255.0 | 114.0 | False | None | None | False | None | False | 29070.0 | 0 |
| 3030976 | 102138 | None | Vol 2 pg no 45 I.No 8.28 | Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge ---- including equipments and all other incidental charges | Sqm | 89.0 | 89.0 | 121.6 | False | None | None | False | None | False | 10822.4 | 0 |
| 3030977 | 102138 | None | Vol 2 pg no 206 I.No 20.88 | Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 10 to 20mm thick in cement mortar 1:3 including cutting the patches in proper shape and replastering the surface of the wall including disposal of rubbish with a lead of 50m including curing cost of materials, labour, complete as per specification ---- including equipments and all other incidental charges | Sqm | 399.0 | 399.0 | 14.8 | False | None | None | False | None | False | 5905.2 | 0 |
| 3030978 | 102138 | None | Vol 2 pg no 8 I.No 11.25.2 | Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in- Charge ---- including equipments and all other incidental charges | Kg | 136.0 | 136.0 | 222.0 | False | None | None | False | None | False | 30192.0 | 0 |
| 3030979 | 102138 | None | VOL 2 Pg No 100 I.NO 12.21 | Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures) ---- including equipments and all other incidental charges | Sqm | 5742.0 | 5742.0 | 5.28 | False | None | None | False | None | False | 30317.76 | 0 |
| 3030980 | 102138 | None | VOL 2 Pg No 100 I.NO 12.13.1 | Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. ---- including equipments and all other incidental charges | Sqm | 98815.0 | 98815.0 | 0.16 | False | None | None | False | None | False | 15810.4 | 0 |
| 3030981 | 102138 | None | VOL 2 Pg No 94 I.NO 11.53.1 | Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete, complying to ASTM C920, DIN 18540- F & ISO 11600 Upto 5 mm depth and 5 mm width including cost of materials, labour, usage charges of machinery complete as per specifications ---- including equipments and all other incidental charges | m | 115.0 | 115.0 | 13.6 | False | None | None | False | None | False | 1564.0 | 0 |
| 3030982 | 102138 | None | VOL 2 Pg No 218 I.NO 22.15.1 | Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Handles 200mm ---- including equipments and all other incidental charges | No | 450.0 | 450.0 | 8.0 | False | None | None | False | None | False | 3600.0 | 0 |
| 3030983 | 102138 | None | VOL 2 Pg No 218 I.NO 22.15.3 | Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Aldrop 16mm dia, 200mm ---- including equipments and all other incidental charges | No | 300.0 | 300.0 | 4.0 | False | None | None | False | None | False | 1200.0 | 0 |
| 3030984 | 102138 | None | VOL 2 Pg No 219 I.NO 22.15.5 | Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Tower Bolts 150x10mm ---- including equipments and all other incidental charges | No | 120.0 | 120.0 | 4.0 | False | None | None | False | None | False | 480.0 | 0 |
| 3030985 | 102138 | None | VOL 2 Pg No 219 I.NO 22.15.8 | Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS hinges 125 mm ---- including equipments and all other incidental charges | No | 50.0 | 50.0 | 12.0 | False | None | None | False | None | False | 600.0 | 0 |
| 3030986 | 102138 | None | VOL 2 Pg No 219 I.NO 22.15.10 | Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Door stopper 75mm ---- including equipments and all other incidental charges | No | 100.0 | 100.0 | 4.0 | False | None | None | False | None | False | 400.0 | 0 |