createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1710236116923 version 3 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 1900.00 emd 179300.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 22-03-2024 16:00:00 tenderQueryClose 19-03-2024 16:00:00 technicalBidOpen 25-03-2024 16:30:00 publishedDate 15-03-2024 12:51:42 publishedByPost PWD_EE_DIV_DVG publishedByUser KPE15413 - G NARENDRA BABU bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate None preBidMeetingYn False preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson G Narendra Babu splitEmdRequiredYn True emdBankGuarantee 79300.00 emdCash 100000.00 bgValidityPeriod 180 hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08192231530 mobileNumber 8105684077 tenderSupplierList None
tenderSchedule	createdTs 1710236116960 version 6 createdDate None modifiedDate None tenderNumber PWD/2023-24/BD/WORK_INDENT6437 title Construction of Kitchen block and Dining hall for VVIP Guest house at Nyamathi town in Nyamathi taluk, Davanagere District. description Construction of Kitchen block and Dining hall for VVIP Guest house at Nyamathi town in Nyamathi taluk, Davanagere District. category WORKS categoryText Works ecv 7596981.96 deptName Public Works Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 1702 locationName PWD Division Office Davanagere provisionalAmount 10000000.0 groupOverheadTotal 0.0 fileNumber AEE/PWD/HON/BLD/2023-24
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1710236117000 0 None None Buildings GROUND FLOOR 2920336.58 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3002860 100181 None Item No. 1.12 Page No. Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth Cum 97.85 97.85 37.56 False None None False None False 3675.246 0 3002861 100181 None Item no1.14.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m Cum 105.06 105.06 150.56 False None None False None False 15817.8336 0 3002862 100181 None Item No.1.15.2 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting depth exceeding 1.5m , but not exceeding 3m Cum 437.75 437.75 16.73 False None None False None False 7323.5575 0 3002863 100181 None ITEM NO. 4.1 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, GROUND excavation top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 ltr/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. Sqm 121.54 121.54 102.54 False None None False None False 12462.7116 0 3002864 100181 None item No.1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 273.98 273.98 150.53 False None None False None False 41242.2094 0 3002865 100181 None Item No. 1.8 P.No. 7 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. Cum 488.22 488.22 111.36 False None None False None False 54368.1792 0 3002866 100181 None Item No. 2.1.3 Pl.No. 15 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to coplete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates Cum 6168.67 6168.67 24.3 False None None False None False 149898.681 0 3002867 100181 None 2.2.3 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Isolated Footing including cost of formwork, centering & scaffolding 8% for isolated footing. loading and unloading charges etc. Complete as directed as per specifcation and direction of Engineer in-charge of the work Cum 7048.17 7048.17 19.98 False None None False None False 140822.4366 0 3002868 100181 None 2.2.3 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Combined Footing. including cost of formwork, centering & scaffolding 3% for combined footing. loading and unloading charges etc. Complete as directed as per specifcation and direction of Engineer in-charge of the work Cum 6721.86 6721.86 19.84 False None None False None False 133361.7024 0 3002869 100181 None Item No.2.4.3 Page No.16 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes finsishing concrete structure in line, all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Columns. s including cost of formwork,centering and scaffolding 70 % for columns up to plinth level loading and unloading charges etc.Complete as directed as per specifcation and direction of Engineer in-charge of the work. Cum 11094.34 11094.34 5.41 False None None False None False 60020.3794 0 3002870 100181 None Item No. 2.5.2 Page No.17 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes finsishing concrete structure in line, all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm and down size graded crushed coarse aggregates Plinth Beams, Curtain wall. Including cost of Formwork.s including cost of formwork, centering and scaffolding 70 % for columns above plinth level loading and unloading charges etc.Complete as directed as per specifcation and direction of Engineer in-charge of the work. Cum 11982.09 11982.09 7.79 False None None False None False 93340.4811 0 3002871 100181 None Item No.2.4.3 Page No. 16 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.Plinth Beams. including cost of formwork, centering & scaffloding 50% for plinth beams loading and unloading charges etc. Complete as directed as perspecifcation and direction of Engineer in-charge of the work Cum 9789.12 9789.12 5.31 False None None False None False 51980.2272 0 3002872 100181 None Item No. 2.4.3 Page No. 16 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.Curtain wall. including cost of formwork, centering & scaffloding 10% for curtain wall loading and unloading charges etc. Complete as directed as per specifcation and direction of Engineer in-charge of the work Cum 7178.69 7178.69 15.68 False None None False None False 112561.8592 0 3002873 100181 None Item No. 2.5.2, P.No.16 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Beams & Lintel. including cost of formwork, centering & scaffloding 60% for beams and lintel. loading and unloading charges etc. Complete as directed as per specifcation and direction of Engineer in-charge of the work Cum 11277.26 11277.26 9.91 False None None False None False 111757.6466 0 3002874 100181 None Item No 2.5.2 Page No.15 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Roof Slab. including cost of formwork, centering & scaffloding 50% for roof slab loading and unloading charges etc. Complete as directed as per specifcation and direction of Engineer in-charge of the work Cum 10572.44 10572.44 12.96 False None None False None False 137018.8224 0 3002875 100181 None ITEM NO.2.5.2 Page No. 16 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Sill. including cost of formwork, centering & scaffloding 3% for sill loading and unloading charges etc. Complete as directed as per specifcation and direction of Engineer in-charge of the work Cum 7259.74 7259.74 0.79 False None None False None False 5735.1946 0 3002876 100181 None ITEM NO.2.5.2 P.No.16 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. including cost of formwork, centering & scaffloding 45% for Chejja loading and unloading charges etc. Complete as directed as per specifcation and direction of Engineer in-charge of the work Cum 10220.02 10220.02 1.19 False None None False None False 12161.8238 0 3002877 100181 None Ite No. 2.11a Page No. 18 Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings t 92140.71 92140.71 8.48 False None None False None False 781353.2208 0 3002878 100181 None Item No. 6.8 Page No. 14 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 8208.07 8208.07 26.45 False None None False None False 217103.4515 0 3002879 100181 None Item No. 12.13.1, Page No. 100 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves ( excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications Cum 101779.45 101779.45 0.39 False None None False None False 39693.9855 0 3002880 100181 None I.No. 12.51 Page No. 104 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. Nos 1046.48 1046.48 2.0 False None None False None False 2092.96 0 3002881 100181 None I No. 10.6.3 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete Fastener with threaded dia 12 mm Nos 61.8 61.8 12.0 False None None False None False 741.6 0 3002882 100181 None I No. 12.15 Page No. 100 Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. ( excluding cost of fixtures ) Sqm 7667.32 7667.32 5.0 False None None False None False 38336.6 0 3002883 100181 None I No. 12.57.5 Page No. 105 Providing and fixing 35 mm thick one side teak and one side commercial flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets ( core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 ( part-I) 1991. from manufacturer complete as per spcification m 4013.91 4013.91 0.9 False None None False None False 3612.519 0 3002884 100181 None I No. 12.9 Page No. 110 Providing & fixing of 3 track x 2 panel sliding windows made out of multi chambered UPVC Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T and Ps shall not be made) Sqm 6936.02 6936.02 12.0 False None None False None False 83232.24 0 3002885 100181 None I No. 12.85 P No. 109 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 5890.57 5890.57 0.9 False None None False None False 5301.513 0 3002886 100181 None I.No. 11.34B P .No. 86 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. Kg 188.49 188.49 270.9 False None None False None False 51061.941 0 3002887 100181 None I.No.8.1.2 P.No.41 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 248.23 248.23 139.66 False None None False None False 34667.8018 0 3002888 100181 None I.No. 8.51 P.No.50 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 103.0 103.0 287.11 False None None False None False 29572.33 0 3002889 100181 None I.No. 8.2.2 P.No.41 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (Out side) Sqm 287.37 287.37 199.76 False None None False None False 57405.0312 0 3002890 100181 None I.No. 9.2 P.No. 59 Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1 2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed 2 litre per 50 kg of cement or as per direction of Engineer incharge. Sqm 824.0 824.0 33.64 False None None False None False 27719.36 0 3002891 100181 None I.No. 9.24 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with whitecement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, Lakared, River Pink, Orissa Blue or equivalent. Sqm 2937.56 2937.56 92.49 False None None False None False 271694.9244 0 3002892 100181 None 10.1.1 Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Sqm 4126.18 4126.18 4.44 False None None False None False 18320.2392 0 3002893 100181 None Item No, 11.28 Page No. 34 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessoris such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 581.95 581.95 50.88 False None None False None False 29609.616 0 3002894 100181 None Item No, 8.33.1 Page No. 46 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Special primer applied 0.75 ltr 10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 162.74 162.74 287.11 False None None False None False 46724.2814 0 3002895 100181 None Item No, 8.3 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paer smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Sqm 179.22 179.22 204.76 False None None False None False 36697.0872 0 3002896 100181 None I,No, 8.33.3 Page No, 47 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 143.17 143.17 12.9 False None None False None False 1846.893 0 1710236117000 0 None None Buildings First Floor 1984607.8 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3002897 100182 None Item No, 2.5.2 Page No, 16 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.including cost of formwork, centering & scaffloding 70 % for columns loading and unloading charges etc. Complete as directed as per specifcation and direction of Engineer in-charge of the work Cum 12052.58 12052.58 9.99 False None None False None False 120405.2742 0 3002898 100182 None I.No.2.5.2 P.No.16 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. including cost of formwork,centering & scaffloding 60 % for columns loading and unloading charges etc. Complete as directed as per specifcation and direction of Engineer in-charge of the work Cum 11347.75 11347.75 9.84 False None None False None False 111661.86 0 3002899 100182 None Item No. 2.5.2 Page No. 16 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. including cost of formwork,centering 50% for roof slab loading and unloading charges etc. Complete as directed as perspecifcation and direction of Engineer in-charge of the work Cum 10642.92 10642.92 12.96 False None None False None False 137932.2432 0 3002900 100182 None I.NO. 2.5.2 P.No.16 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. including cost of formwork, centering 3% for sill loading and unloading charges etc. Complete as directed as per specifcation and direction of Engineer in-charge of the works Cum 7330.22 7330.22 0.86 False None None False None False 6303.9892 0 3002901 100182 None Item No. 2.5.2 Page No. 16 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. including cost of formwork, centering 45% for Chejja loading and unloading charges etc. Complete as directed as per specifcation and direction of Engineer in-charge of the work Cum 10290.5 10290.5 1.19 False None None False None False 12245.695 0 3002902 100182 None Item No. 2.11a P.No.18 Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings t 93062.12 93062.12 4.62 False None None False None False 429946.9944 0 3002903 100182 None Item no. 6.8 , P.No.14 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 8290.15 8290.15 38.19 False None None False None False 316600.8285 0 3002904 100182 None Item No. 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves ( excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications Cum 102797.24 102797.24 0.55 False None None False None False 56538.482 0 3002905 100182 None Item No. 12.51 P.No. 104 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. Nos 1056.94 1056.94 3.0 False None None False None False 3170.82 0 3002906 100182 None I.No. 10.6.3, P.No. 69 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete Fastener with threaded dia 12 mm Nos 62.42 62.42 18.0 False None None False None False 1123.56 0 3002907 100182 None Item No.12.15 P.No.100 Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. ( excluding cost of fixtures ) Sqm 7743.99 7743.99 5.0 False None None False None False 38719.95 0 3002908 100182 None Item No. 12.57.5 P.No. 105 Providing and fixing 35 mm thick one side teak and one side commercial flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets ( core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 ( part-I) 1991. from manufacturer complete as per spcification m 4054.05 4054.05 1.8 False None None False None False 7297.29 0 3002909 100182 None Item No. 12.9 P.No.110 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&Ps shall not be made) Sqm 7005.38 7005.38 12.0 False None None False None False 84064.56 0 3002910 100182 None Item No. 12.85 P.No.109 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Sqm 5949.48 5949.48 0.9 False None None False None False 5354.532 0 3002911 100182 None Item No. 11.34B P.No.86 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. Kg 190.37 190.37 270.9 False None None False None False 51571.233 0 3002912 100182 None Item No. 8.1.2 P.No. 41 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 250.71 250.71 151.22 False None None False None False 37912.3662 0 3002913 100182 None Item No. 8.51 P.No.50 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Sqm 104.03 104.03 298.69 False None None False None False 31072.7207 0 3002914 100182 None Item No. 8.2.2 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (Out side) Sqm 290.24 290.24 242.97 False None None False None False 70519.6128 0 3002915 100182 None Item No. 9.24, P.No. 63 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with whitecement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, Lakared, River Pink, Orissa Blue or equivalent. Sqm 2966.94 2966.94 87.58 False None None False None False 259844.6052 0 3002916 100182 None Item No. 10.1.1 P.No. 69 Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Sqm 4167.44 4167.44 3.0 False None None False None False 12502.32 0 3002917 100182 None Item No. 15.1 P.No.151 Newly Constructed Bathroom/toilet/balcony/utility with Cementatius Waterproof coating - Below 300 m2: Providing and Applying CFTRI approved two component flexible polymer modified acrylic cementitious waterproofing coating with a mix ratio of (1 Liquid: 2 Powder), to the RCC surface like bathroom, toilet, balcony & utility area applied @ 1.7kg/m2 in 2 coats to achieve 1mm DFT, having Elongation at break 50% as per ASTM D 412, Tensile strength 1N/mm2 as per ASTM D 412, Adhesion strength: 0.80 N/mm2 as per ASTM D 4541, crack bridging upto 1mm as per ASTM C 836, Water penetration (5 bar pressure) as per BS EN 12390. The finished cost to include surface preparation, making coving of 50 mm X 50mm at all right angles of wall Junction with Polymer Repair Mortar and lay 45 gsm glass fibre mesh over the angle fillet when the first coat in still wet, treatment of cracks completely as per specification. Sqm 381.79 381.79 108.96 False None None False None False 41599.8384 0 3002918 100182 None Item No. 7.18 P.No.23 Providing and laying cinder concrete in cement 115 ( 1 cement 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slopecompacting, including cost of materials, labour, curing complete as per specifications. Cum 2098.29 2098.29 1.2 False None None False None False 2517.948 0 3002919 100182 None Item No. 9.11 P.No.60 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete Sqm 924.83 924.83 4.0 False None None False None False 3699.32 0 3002920 100182 None Item No. 10.14 P.No. 71 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2, including pointing in white cement mixed with pigment of matching shade complete. Sqm 1150.57 1150.57 14.91 False None None False None False 17154.9987 0 3002921 100182 None Item No.11.28 P.No. 85 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessoris such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kg 587.77 587.77 50.88 False None None False None False 29905.7376 0 3002922 100182 None Item No. 8.33.1 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Special primer applied 0.75 ltr 10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 164.37 164.37 298.69 False None None False None False 49095.6753 0 3002923 100182 None Item No. 8.3 P.No. 46 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paer smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge Sqm 181.01 181.01 242.97 False None None False None False 43979.9997 0 3002924 100182 None Item No. 4.33.3 P.No.47 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 144.6 144.6 12.9 False None None False None False 1865.34 0 1710236117000 0 None None Buildings SANITARY AND WATER SUPPLY 414508.88 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3002925 100183 None Item no. 13.3.1 Providing and fixing brass stop cock of approved quality :15 mm nominal bore Each 307.97 307.97 4.0 False None None False None False 1231.88 0 3002926 100183 None 13.20.2 Providing and fixing PTMT pillar cock of approved quality and colour. 15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms Each 323.42 323.42 7.0 False None None False None False 2263.94 0 3002927 100183 None 14.2.1 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlleddevice (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid Each 4983.14 4983.14 1.0 False None None False None False 4983.14 0 3002928 100183 None 14.7.8 White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow including operated levers Each 4236.39 4236.39 7.0 False None None False None False 29654.73 0 3002929 100183 None Item No. 14.8 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. Each 1465.69 1465.69 7.0 False None None False None False 10259.83 0 3002930 100183 None Item No. 14.32.2 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 453x357 mm Each 1048.54 1048.54 4.0 False None None False None False 4194.16 0 3002931 100183 None 13.31.2 Providing & fixing Chorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction Engineer in Charge.Exposed on wall - 20mm nominal dia pipes Rmtr 249.26 249.26 60.0 False None None False None False 14955.6 0 3002932 100183 None 13.31.3 Providing & fixing Chorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction Engineer in Charge.Exposed on wall - 25mm nominal dia pipes Rmtr 327.54 327.54 60.0 False None None False None False 19652.4 0 3002933 100183 None 13.31.4 Providing & fixing Chorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction Engineer in Charge.Exposed on wall - 32mm nominal dia pipes Rmtr 412.0 412.0 60.0 False None None False None False 24720.0 0 3002934 100183 None 13.31.6 Providing & fixing Chorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction Engineer in Charge.Exposed on wall - 50mm nominal dia pipes Rmtr 804.43 804.43 90.0 False None None False None False 72398.7 0 3002935 100183 None 13.4.4 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :50 mm nominal bore Each 880.65 880.65 25.0 False None None False None False 22016.25 0 3002936 100183 None 13.8.2.2 Providing and fixing unplasticised PVC connection pipe with brass unions :45 cm length 20 mm nominal bore Each 113.3 113.3 25.0 False None None False None False 2832.5 0 3002937 100183 None 13.34 Providing and placing on terrace, polyethylene water storage tanks as per IS 12701 : 1996 with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow pipes but without fittings and the base support for tank l 9.27 9.27 10000.0 False None None False None False 92700.0 0 3002938 100183 None Item No.660 PVC pipes of 8 Kg/cm2 for 140mm (3.097) Rmtr 469.68 469.68 109.2 False None None False None False 51289.056 0 3002939 100183 None Item No. 664 PVC pipes of 10 Kg/cm2 for 200mm Rmtr 1189.65 1189.65 30.0 False None None False None False 35689.5 0 3002940 100183 None Item No. 672 PVC pipes of 4 Kg/cm2 for 200mm(4.256) Rmtr 502.64 502.64 49.2 False None None False None False 24729.888 0 3002941 100183 None 14.29 Providing and fixing 100 mm sand cast Iron grating for gully trap. Nos 48.41 48.41 10.0 False None None False None False 484.1 0 3002942 100183 None 13.22.1.2 Providing and fixing PTMT grating of approved quality and colour 125 mm nominal dia Nos 45.32 45.32 10.0 False None None False None False 453.2 0 1710236117000 0 None None Buildings Electrical works to the Kitchen Block and Dining Hall in First Floor I B at Nyamati Honnali Taluk. 423531.0 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3002943 100184 None Item No. 1.1.1 Open Conduit System Supplying heavy gauge PVC conduit pipe . dia . mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. 19/20 mm dia 2 mm thick m 69.0 69.0 550.0 False None None False None False 37950.0 0 3002944 100184 None Item No. 1.1.2 Open Conduit System Supplying heavy gauge PVC conduit pipe . dia . mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws.25 mm dia 2 mm thick m 81.0 81.0 315.0 False None None False None False 25515.0 0 3002945 100184 None Item No.1.3- 1.2.1 Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 19/20 mm dia 2 mm thick m 66.0 66.0 250.0 False None None False None False 16500.0 0 3002946 100184 None Item No. 1.2.2 Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 25 mm dia 2 mm thick m 78.0 78.0 120.0 False None None False None False 9360.0 0 3002947 100184 None Item No. 1.5-1.5.1 Supplying and fixing PVC/metal conduit Deep junction box 19/20 mm deep Junction box Each 49.0 49.0 50.0 False None None False None False 2450.0 0 3002948 100184 None Item No. 1.5.2 Supplying and fixing PVC/metal conduit Deep junction box 25 mm deep Junction box Each 56.0 56.0 35.0 False None None False None False 1960.0 0 3002949 100184 None Item No.1.13 Supplying And Fixing Metal Fan Box with Round Hook No 117.0 117.0 30.0 False None None False None False 3510.0 0 3002950 100184 None Item no. 2.1-2.1.1 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet Short point upto 3Mtr from tapping point to out let via switch Point 285.0 285.0 50.0 False None None False None False 14250.0 0 3002951 100184 None Item No. 2.1.2 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch Point 394.0 394.0 25.0 False None None False None False 9850.0 0 3002952 100184 None Item No.2.1.3 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet Long point above 6Mtr upto 10Mtr from tapping point to out let via switch Point 570.0 570.0 20.0 False None None False None False 11400.0 0 3002953 100184 None Item No.2.3-2.3.2 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694:2010 1.5 mm2 m 26.0 26.0 850.0 False None None False None False 22100.0 0 3002954 100184 None Item No. 2.3.3 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694:2010 2.5 mm2 m 42.0 42.0 1800.0 False None None False None False 75600.0 0 3002955 100184 None Item No.2.3.4 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694:2010 4 mm2 m 63.0 63.0 350.0 False None None False None False 22050.0 0 3002956 100184 None Item No. 3.3-3.3.4 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete 8 Way Each 219.0 219.0 15.0 False None None False None False 3285.0 0 3002957 100184 None 3.3.5 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete 10-12 way Each 261.0 261.0 10.0 False None None False None False 2610.0 0 3002958 100184 None 3.3.6 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete 16 way Each 294.0 294.0 10.0 False None None False None False 2940.0 0 3002959 100184 None Item No. 3.4-3.4.5 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall - 8 way Each 261.0 261.0 25.0 False None None False None False 6525.0 0 3002960 100184 None Item No. 3.4.6 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12 way Each 319.0 319.0 10.0 False None None False None False 3190.0 0 3002961 100184 None Item No.3.6-3.6.1 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293- 6A one way switch Each 102.0 102.0 100.0 False None None False None False 10200.0 0 3002962 100184 None Item No. 3.6.3 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6A Three way socket Each 171.0 171.0 10.0 False None None False None False 1710.0 0 3002963 100184 None Item No. 3.6.4 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 Stepped Fan Regulator Two Module Each 357.0 357.0 30.0 False None None False None False 10710.0 0 3002964 100184 None Item No.3.6.8 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 16A One way switch Each 180.0 180.0 10.0 False None None False None False 1800.0 0 3002965 100184 None Item No.3.6.10 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 32A DP Switch Each 326.0 326.0 25.0 False None None False None False 8150.0 0 3002966 100184 None Item No.3.6.11 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6/16A Universal socket Each 236.0 236.0 25.0 False None None False None False 5900.0 0 3002967 100184 None 11.3-11.3.3 Supplying of .feet -PVC Batten with integrated LED tube . W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition-LED light fitting 1 x 4' - 36/40 W Each 1269.0 1269.0 30.0 False None None False None False 38070.0 0 3002968 100184 None Item No.6.4-6.4.1 Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/19 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power upto 35 W +/- 10 %, Rated current As per IS:374/19, Rated power factor 0.9 lagging(min), Rated speed 350 +/- 10% RPM, Rated air delivery 210 +/- 10% Cubic Meter Minimum, Rated service value 6.2 CMM / W, Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201, as per IS specification, Motor winding. Temp rise Shall not exceed 75 deg C over and ambient of 40 0C by resistance method at 245 V, Insulation resistance Shall not be less than Two Mega Ohms (2M Ohms), Leakage current Should not exceed 210 Micro Amp, Power input, W& current, Air Delivery & Fan Speed as per IS:374/2019 with latest amendment, 2year manufacturer Warranty. (BLDC fans)-48" Sweep 5 Star (1200 mm) Each 2677.0 2677.0 16.0 False None None False None False 42832.0 0 3002969 100184 None 13.7-13.7.1 Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamps.-On wall/ ceiling / Rafter / Girder Each 122.0 122.0 30.0 False None None False None False 3660.0 0 3002970 100184 None Item No.13.11 Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of 23/0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired Each 315.0 315.0 16.0 False None None False None False 5040.0 0 3002971 100184 None Item No. 5.18 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32 A SP Each 415.0 415.0 5.0 False None None False None False 2075.0 0 3002972 100184 None Item no. 5.18.6 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 50-63 A DP Each 1102.0 1102.0 3.0 False None None False None False 3306.0 0 3002973 100184 None Item No. 5.18.7 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32A TPN Each 1717.0 1717.0 3.0 False None None False None False 5151.0 0 3002974 100184 None Item No. 5.19-5.19.14 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.-12 Way TP & N Each 8735.0 8735.0 1.0 False None None False None False 8735.0 0 3002975 100184 None Item no.5.2 Supplying, fixing and wiring Residual current circuit breaker (RCCB)240/450V upto 300mA sensitivity on existing wood/ panel board. Each 5147.0 5147.0 1.0 False None None False None False 5147.0 0 1710236117000 0 None None Buildings Providing the Electrical works to the Kitchen Block and Dining hall Ground Floor and First floor UG Cable I B at Nyamati Honnali Taluk. 253104.5 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3002976 100185 None Item No. 32-32.11 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 50 Sqmm, 3.5 Core, (16 GI Strips - 4 x 0.8 mm) Km 178973.0 178973.0 0.5 False None None False None False 89486.5 0 3002977 100185 None 21.01 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff- 3x95 to 150 mm Km 61322.0 61322.0 0.5 False None None False None False 30661.0 0 3002978 100185 None 51.01 GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg No 743.0 743.0 4.0 False None None False None False 2972.0 0 3002979 100185 None 51.02 2 Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each No 676.0 676.0 4.0 False None None False None False 2704.0 0 3002980 100185 None Item No. 51.03 Good Quality Salt for grounding purposes packed in 50 Kg gunny bag Bag 310.0 310.0 4.0 False None None False None False 1240.0 0 3002981 100185 None Item No.51.04 Rod type of earthing using 40 mm Dia, 3 Mtr long MS rod as ground rod, in earth pit of 300 mm width and 3300 mm depth and using 50x6 mm flat welded to ground rod as terminal & connected to equipment ground terminal using PVC Al wire as specified No 2172.0 2172.0 4.0 False None None False None False 8688.0 0 3002982 100185 None Item No.5.18-5.18.8 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.- 40A TPN Each 3044.0 3044.0 5.0 False None None False None False 15220.0 0 3002983 100185 None Item No.5.18.9 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.-50-63 TPN Each 3088.0 3088.0 4.0 False None None False None False 12352.0 0 3002984 100185 None 5.15 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuitwith adjustable thermal magnetic release, Micro processor release shall have Earth Fault as per IS/IEC 60947-2 . (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.-100A 25 KA Each 6086.0 6086.0 1.0 False None None False None False 6086.0 0 3002985 100185 None 5.42-5.42.1 Fabricating supplying and mounting MS box made out .SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete.- 14 SWG Cum 0.5 0.5 80000.0 False None None False None False 40000.0 0 3002986 100185 None Item No. 5.11-5.11.5 Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. (Open Execution)-250 A Each 19290.0 19290.0 1.0 False None None False None False 19290.0 0 3002987 100185 None Item No. 5.27 Supplying, fixing and wiring rotary selector switch suitable for Ammeter Each 200.0 200.0 1.0 False None None False None False 200.0 0 3002988 100185 None Item No. 5.28 Supplying, fixing and wiring rotary selector switch suitable for Voltmeter Each 160.0 160.0 1.0 False None None False None False 160.0 0 3002989 100185 None Item No.5.38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. Each 515.0 515.0 3.0 False None None False None False 1545.0 0 3002990 100185 None 5.4-5.41 Supplying . A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete-250 A 4 x 30 x 10 mm Aluminium Strips m 3435.0 3435.0 5.5 False None None False None False 18892.5 0 3002991 100185 None Item No. 5.41-5.41.3 Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. Flat.with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.-75x75x6mm m 555.0 555.0 6.5 False None None False None False 3607.5 0 1710236117000 0 None None Buildings Furniture 1600893.2 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3002992 100186 None KSFIC DWD 33 Teak wood 2 leg(side legs) dining table: Of size 6'x3'. Leg size 2.5x6"x6"=02 nos. Support patti-1.5'x4.5"x2"-06 nos. Top support 3'x4"x1.5'-01 no. & middle support 4.5'x3"x1.5"=01 n0. with 12mm glass for table top. Table shall be neatly finished and polished Each 39420.0 39420.0 4.0 False None None False None False 157680.0 0 3002993 100186 None KSFIC DWD 042 Teak wood dinning chair :seat with teakwood patti back with bend shape patti (Latest model) as per photo Each 11980.0 11980.0 16.0 False None None False None False 191680.0 0 3002994 100186 None KSFIC DWD 093 Conference table : (Plywood with laminate dtop ) of size width 2' height 2.5. Made out of 18mm plywood for top & front with both side laminate dand front side closed. Inner side shall be provided suitable vertical support of 36 mm plywood. Table shall be provided with footrest with suitable mm plywood. Table inner side shall be polish or paint (Rate per running ft) Feet 4840.0 4840.0 30.0 False None None False None False 145200.0 0 3002995 100186 None KSFIC DWD 112 High Back Cushion Chair : High back chair with seat and back high quality feather touch rexin of any colour, arms with SS Plated frame and cusioning, SS Base 5 caster wheel legs along with Syncro Mechanism. Each 17980.0 17980.0 10.0 False None None False None False 179800.0 0 3002996 100186 None KSFIC DWD 104 Providing and fixing storage unit : of 0.75m width made out pof 19mm thick commercial ply vertical support finished in approved 1.5mm laminated with 12mm thick ply packing internally finished with enamel paint of approved colour and shade shelves shall be formed out of 19mm ply finshed wih enamel paint of approved shade and colour 19mm thick shtters formed out 19mm thick ply finished with 1.5mm thick laminated of approved shade and colour et., complete the rate includes cost of all materials, labour charges, completee as per specification (Rate per Sq.Mtr) Sqm 19940.0 19940.0 16.28 False None None False None False 324623.2 0 3002997 100186 None KSFIC.DWD 002 Teak wood Damru sofa set : 1+3+1 with tepaoy and cushion, made out of teak wood front and back legs 3.5"x3.5", sofa front patti 5"x1.5" . Sofa support side bars 4"xx1.25" & 1.5"x1" repers. Sofa handle sixe 5"1.5". Sofa set shall be neatly finished and polished Each 96780.0 96780.0 4.0 False None None False None False 387120.0 0 3002998 100186 None KSFIC.DWD 071 Peacock Chair: (Standard company) Seat, and Back half cushion withh cloth or Rexin Each 4570.0 4570.0 47.0 False None None False None False 214790.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1710236118000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1710236118000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1710236118000 1 None None ELIGIBILITY The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of KPP Portal due to internet connectivity issues and technical glitches at bidders end. None 1710236233000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of KPP Portal on or before the last date and time of bid submission. None 1710236266000 0 None None ELIGIBILITY Contractors should follow strictly prevailing rules of labour act None 1710236276000 0 None None ELIGIBILITY The cost of the Tender form shall not be refundable None 1710236286000 0 None None ELIGIBILITY The employer reserves the rights to Reject one or all Tender without assigning any reasons None 1710236312000 0 None None ELIGIBILITY The employer is not responsible for any delay in accessing KPPP Portal None 1710236323000 1 None None ELIGIBILITY contractors registration certificate class 3 and above None 1710236336000 0 None None ELIGIBILITY Royalty on construction materials and other taxes will be deducted as per prevailing Govt orders None 1710236348000 0 None None ELIGIBILITY To qualify for award of this contract, each tenderer should give all details and documents as per Technical and Financial bid attached to this tender None 1710236360000 0 None None ELIGIBILITY Materials like bitumen steel cement etc required for the work shell be procured by the tenderer themselves and should got tested by the quality control authority before use on the work None 1710236370000 0 None None ELIGIBILITY As per Karnataka state Government order LD.300.LET.2006 Bangalore dated 01.01.2007 and Government letter no PW.134.BMS.2007 dated 27.07.2007 a sum amounting to 1Percent of the bill amount will be deducted towards constructions labour welfare fund None 1710236379000 0 None None ELIGIBILITY All the formats prescribed in the bid document shall be filled by the tenderer in complete manner None 1710236388000 0 None None ELIGIBILITY original documents shall be scanned. and same has to be uploaded in KPP Portal None 1710236398000 0 None None ELIGIBILITY The contractors assessed tender capacity will be calculated asper the clauses of STD document attached None 1710236406000 0 None None ELIGIBILITY The tender validity period is 90Days from the date of opening of Tender None 1710236415000 0 None None ELIGIBILITY The intending contractors are requested to note that they should abide by the detailed instructions and conditions contained in the Standard Bid document None 1710236429000 0 None None ELIGIBILITY In the case of the death of the contractor after executing the agreement / commencement of the work, his legal heir, if is an eligible registered contractor and is willing can execute and compete the work at the accepted tender rates irrespective of the cost of the work. None 1710236442000 0 None None ELIGIBILITY All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent. None 1710236455000 0 None None ELIGIBILITY Contractor shall bound to comply the prevailing rules and regulations with regard to the EPF Contribution rules and any modifications thereof before and after execution of agreement None 1710236468000 0 None None ELIGIBILITY Contractors has to submit their labour EPF details with every Running Bill None 1710236478000 0 None None ELIGIBILITY Bidder Should Establish a field Laboratory None 1710236489000 0 None None ELIGIBILITY submit Affidavit duly signed by notary should be furnished for the statements showing the value of existing commitments and on-going works (for B Value) to calculate Bid Capacity. None 1710236501000 0 None None ELIGIBILITY Increase in GST shall not be paid in the extended period of contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time None 1710236513000 0 None None ELIGIBILITY The intending contractors are requested to note that they should abide by the detailed instructions and conditions contained in the Standard Bid document KW 3 None 1710236527000 0 None None ELIGIBILITY The rates are exclusive of GST. The contractor has to quote the rates without GST. As per Govt. order FD:447:Exependiture:12/2022 Bangalore dt. 30-7-2022 GST 18% will be added to the contract amount separately. None 1710236538000 0 None None ELIGIBILITY Value, at 2023-24 price level, of existing commitments and on-going works Documents to be submitted None 1710236555000 0 None None ELIGIBILITY The contractor shall submit the details of Technical staff employed by him. None 1710236568000 0 None None ELIGIBILITY Within 20 days of receipt of the Letter of Acceptance, the successful Tenderer shall deliver to the Employer a Security deposit in any of the forms given below for an amount equivalent to 5% of the Contract price plus additional security for unbalanced tenders in accordance with Clause 25.5 of ITT and Clause 44 of the Conditions of Contract. None 1710236585000 0 None None ELIGIBILITY To qualify for award of this contract, each tenderer in his name should have in the last five years period financial turnover Certificate (Balance Sheets) issued by the competent accountant/authority with UDIN number. None 1710236624000 0 None None ELIGIBILITY The Work completion period is 9 months (including monsoon) None 1710236635000 0 None None ELIGIBILITY The Defects Liability Period for this project shall be upto ONE YEAR None 1710236646000 1 None None ELIGIBILITY Contractors has to upload the EPF Registration None 1710236658000 0 None None ELIGIBILITY Estimate rates are excluding GST as per Common SR 2023-24 and prevailing GST (18% of Amount Put to tender) amount is kept in form of Lump sum in sanctioned estimate according to guidelines in Common SR Therefore, amount put to Tender and ECV amount are excluding GST. KPPP-PORTAL format has No Options to add GST Separately at stage of Draft Tender Schedule Process for Over All amount put to Tender, tender has been inviting through an Option with INCLUSIVE. But the item wise rates do not include GST. Hence, Contractor has to quote the rates excluding GST and the GST will be paid separately for the quoted amount accordingly. Declaration Certificate must be attached mandatorily. None 1710308071000 0 None None ELIGIBILITY THE EMD SHALL BE PAID THROUGH PUBLIC PROCUREMENT PORTAL IN FULL AMOUNT OR EMD FOR RS. 1,00,000.00 SHALL BE PAID THROUGH KARNATAKA PUBLIC PROCUREMENT PORTAL (KPPP) AND THE BALANCE OF RS 79300.00 BY BANK GUARANTEE ISSUED BY NATIONALISED/SCHEDULED BANK. CONTRACTOR SHOULD UPLOAD THE SCANNED COPY OF BANK GUARANTEE ISSUED BY NATIONALISED/SCHEDULED BANK IN KARNATAKA PUBLIC PROCUREMENT PORTAL (KPPP), BEFORE ENTERING THE AGREEMENT, IF AWARDED. None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None None None None None None Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx) None None None None None None Total value of civl engineering works executed and payments received in the last five years (year-wise) None None None None None None List of works for which tenders already submitted None None None None None None Banker Details for reference None None None None None None Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded None None None None None None Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years None None None None None None Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded None None None None None None List of Financial Resources with Certificates None None None None None None Satisfactoriy completed atleast 50 PERCENT as prime contractor at-least one such similar work i.e BUILDING Work of value not less than Rs. 44.82LAKHS Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Executed in any one year the following minimum quantities of work 1.Earth work 252.95cum 2. PCC & RCC 126.38cum 3. TMT STEEL 10.49 TONNE 4. Solid Concrete blocks/BBM 75.73 CUM 5. Plastering 594.89 Sqm 6. Flooring 173.38 Sqm Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None List of existing commitments and ongoing works Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- value of B Format None None None None To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2018-19 to 2022-23 achieved in at least two financial years an average annual financial turnover in all classes civil engineering works equal to estimated cost i.e 89.64 lakhs Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Liquid assets and /or availability of credit facilities of no less than Rs. 26.89Lakhs Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit None None None None A copy of Valid KPWD registration certificate Class III & Above Certificate issued by the competent authority Others PWD License copy issued by the competent authority createdTs version createdDate modifiedDate documentName None None None None PWD Registration Certificate (Class I/II/III/IV)
tenderCriterionDocumentList	documentName optional documentTypeText To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2018-19 to 2022-23 achieved in at least two financial years an average annual financial turnover in all classes civil engineering works equal to estimated cost i.e 89.64 lakhs True Technical Bid A copy of Valid KPWD registration certificate Class III & Above Certificate issued by the competent authority True Technical Bid Satisfactoriy completed atleast 50 PERCENT as prime contractor at-least one such similar work i.e BUILDING Work of value not less than Rs. 44.82LAKHS True Technical Bid Liquid assets and /or availability of credit facilities of no less than Rs. 26.89Lakhs True Technical Bid Executed in any one year the following minimum quantities of work 1.Earth work 252.95cum 2. PCC & RCC 126.38cum 3. TMT STEEL 10.49 TONNE 4. Solid Concrete blocks/BBM 75.73 CUM 5. Plastering 594.89 Sqm 6. Flooring 173.38 Sqm True Technical Bid The each Tenderer in his name should have achieved in at least TWO financial year a minimum financial turnover in all classes of civil engineering construction works only for Rs 89.64 lakhs in last five years i.e. 2018-19 to 2022-23 Submit the Income tax Returns and balance sheet indicating the contract receipts certified by the chartered accountant True Technical Bid Details of existing commitments and on going works as per Standard Tender Documents Section 3.1.5A Proforma True Technical Bid Work Done Certificate For Rs.44.82lakhs of similar nature work done certificate as the prime contractor in the last five years i.e. 2018-19 to 2022-23 duly signed by not below the rank of Executive Engineer True Technical Bid The Tenderer should furnish all the necessary original documents mentioned above at the time of opening of Technical Bid True Technical Bid GST, PAN, TIN, PIN, PHONE NUMBERS and Address for communication True Technical Bid GST declaration certificate must be uploaded mandatorily by the prospective bidders True Technical Bid Contractors has to upload the EPF Registration True Technical Bid
tenderWorkLocationList
tenderAddress	None
tenderRecallDTO	None