| 3039626 | 102647 | None | DVG 1.14.1 | Earth work excavation for Foundation by mechanical means for all works and depth up to 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting and stacking the selected earth for reuse in a radius of 50 m and lift up to 1.5 m including cost of labour, tools, usage of machinery and other appurtenances required to complete the work In all kinds of soils Depth up to 3 m | Cum | 105.06 | 105.06 | 353.65 | False | None | None | False | None | False | 37154.469 | 0 |
| 3039627 | 102647 | None | DVG 2.1.3 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. the granite or trap or basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead and lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. the cost of steel reinforcement & formwork shall be paid separately mix 1 3 6 m10 Using 40 mm nominal size graded crushed coarse aggregates | Cum | 6168.67 | 6168.67 | 62.2 | False | None | None | False | None | False | 383691.274 | 0 |
| 3039628 | 102647 | None | DVG 5.4 | Providing Size Stone masonry with hard stone in foundation and plinth with Cement mortar 1 cement 6 coarse sand | Cum | 6580.67 | 6580.67 | 26.33 | False | None | None | False | None | False | 173269.0411 | 0 |
| 3039629 | 102647 | None | DVG 6.33 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800Kg per Cum and minimum mpressive strength of 4.00 N per Sqm conforming to IS 2185 Part I 2005 and constructed with Cm 1 is to 4 as 2005 including cost of all materials, labour,scaffolding and curing, usage charges of machinery etc complete as per specifications | Sqm | 1267.93 | 1267.93 | 842.78 | False | None | None | False | None | False | 1068586.0454 | 0 |
| 3039630 | 102647 | None | DVG 2.4.3 | Providing and laying in position Reinforced cement concrete for all Foundation works. the granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. the cost of steel reinforcement and formwork to be paid separatelym25 Design mix Using 20 mm nominal size graded crushed coarse aggregates m25 Design mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6526.08 | 6526.08 | 216.0 | False | None | None | False | None | False | 1409633.28 | 0 |
| 3039631 | 102647 | None | DVG 115.116 | corrigendum 3 appendix 1 additionalities for form work, centring and scaffolding for footing | Cum | 522.09 | 522.09 | 47.2206 | False | None | None | False | None | False | 24653.403054 | 0 |
| 3039632 | 102647 | None | DVG 1.9 | Filling available excavated earth excluding rock in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m | Cum | 273.98 | 273.98 | 428.13 | False | None | None | False | None | False | 117299.0574 | 0 |
| 3039633 | 102647 | None | DVG 115.116 | corrigendum 3 appendix 1 additionalities for form work, centring and scaffolding for Column | Cum | 4568.26 | 4568.26 | 59.61 | False | None | None | False | None | False | 272313.9786 | 0 |
| 3039634 | 102647 | None | DVG 115.116 | corrigendum 3 appendix 1 additionalities for form work, centring and scaffolding for Plinth Beam | Cum | 3263.04 | 3263.04 | 29.03 | False | None | None | False | None | False | 94726.0512 | 0 |
| 3039635 | 102647 | None | DVG 115.116 | corrigendum 3 appendix 1 additionalities for form work, centring and scaffolding for Roof beam | Cum | 3915.65 | 3915.65 | 22.6502 | False | None | None | False | None | False | 88690.25563 | 0 |
| 3039636 | 102647 | None | DVG 115.116 | corrigendum 3 appendix 1 additionalities for form work, centring and scaffolding for SlAB | Cum | 3263.04 | 3263.04 | 42.9706 | False | None | None | False | None | False | 140214.786624 | 0 |
| 3039637 | 102647 | None | DVG 115.116 | corrigendum 3 appendix 1 additionalities for form work, centring and scaffolding for chejja | Cum | 2936.74 | 2936.74 | 0.47 | False | None | None | False | None | False | 1380.2678 | 0 |
| 3039638 | 102647 | None | DVG 11.32 | Providing thermo-mechanically treated bars of grade Fe 550D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members wherever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. the laps and wastages shall not be measured separately | t | 92140.71 | 92140.71 | 16.073 | False | None | None | False | None | False | 1480977.63183 | 0 |
| 3039639 | 102647 | None | DVG 11.32 | Providing thermo-mechanically treated bars of grade Fe 500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members wherever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. the laps and wastages shall not be measured separately | t | 89457.0 | 89457.0 | 0.688 | False | None | None | False | None | False | 61546.416 | 0 |
| 3039640 | 102647 | None | DVG 6.34 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800Kg per Cum and minimum compressive strength of 4.00 N per Sqmm conforming to IS 2185 Part I 2005 and constructed with Cm 1 4as per IS 2572 2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specification | Sqm | 1137.12 | 1137.12 | 281.2896 | False | None | None | False | None | False | 319860.029952 | 0 |
| 3039641 | 102647 | None | DVG 2.3.2 | Providing and laying in position Reinforced cement concrete for all Foundation works. the granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. the cost of steel reinforcement and formwork to be paid separately m20 Design mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6526.08 | 6526.08 | 0.47 | False | None | None | False | None | False | 3067.2576 | 0 |
| 3039642 | 102647 | None | DVG 115.116 | corrigendum 3 appendix 1 additionalities for form work, centring and scaffolding revision for Lintel | Cum | 3915.65 | 3915.65 | 3.76 | False | None | None | False | None | False | 14722.844 | 0 |
| 3039643 | 102647 | None | DVG 115.116 | corrigendum 3 appendix 1 additionalities for form work, centring and scaffolding revision for chajja | Cum | 2936.74 | 2936.74 | 0.48 | False | None | None | False | None | False | 1409.6352 | 0 |
| 3039644 | 102647 | None | DVG 8.2.1 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1 cement 4 fine sand including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in charge for inside | Sqm | 303.85 | 303.85 | 1313.9498 | False | None | None | False | None | False | 399243.64673 | 0 |
| 3039645 | 102647 | None | DVG 8.3.1 | Providing 20 mm cement plaster of mix 1cement4 fine sand to brick or stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete. for out sid | Sqm | 364.62 | 364.62 | 963.01 | False | None | None | False | None | False | 351132.7062 | 0 |
| 3039646 | 102647 | None | DVG 7.38 | Providing and fixing precoated galvanised iron profile sheets size, shape and pitch of corrugation as approved by Engineer in charge 0.50 mm 0.05 percent total coated thickness with zinc coating 120 grams per Sqm as per IS 277, in 240 mpa steel grade, 5 7microns epoxy primer on both side of the sheet and polyester top coat 15 18microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 m or as desired by Engineer-in-charge. the sheet shall be fixed using self drilling self-tapping screws of size 5.5x 55 mm with EPDm seal, complete up to any pitch in horizontal vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required | Sqm | 585.04 | 585.04 | 94.0 | False | None | None | False | None | False | 54993.76 | 0 |
| 3039647 | 102647 | None | DVG 11.16.3 | Supplying fit Providing and fixing Steel work in built up tubular round, square or rectangular hollow tubes etc trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Electric resistance or induction butt welded tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer inCharge. | Kg | 125.66 | 125.66 | 747.0 | False | None | None | False | None | False | 93868.02 | 0 |
| 3039648 | 102647 | None | DVG 9.38 | Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1 3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications | Sqm | 1433.76 | 1433.76 | 410.31 | False | None | None | False | None | False | 588286.0656 | 0 |
| 3039649 | 102647 | None | DVG 9.9 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm thickness to be specified by the manufacturer of 1st quality conforming to IS 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1 Cement 4 Coarse sand, Jointing with grey cement slurry at 3.3 Kg per Sqm including pointing the joints with white cement and matching pigment etc complete | Sqm | 915.67 | 915.67 | 144.76 | False | None | None | False | None | False | 132552.3892 | 0 |
| 3039650 | 102647 | None | DVG 9.12 | Providing and laying vitrified floor tiles in different sizes thickness to be specified by the manufacturer with water absorption less than 0.08percent and conforming to IS15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1 cement 4 coarse sand, jointing with grey cement slurry at 3.3 Kg per Sqm including grouting the joints with white cement and matching pigments etc. complete. Size of tile 500x500 mm | Sqm | 1114.46 | 1114.46 | 158.38 | False | None | None | False | None | False | 176508.1748 | 0 |
| 3039651 | 102647 | None | DVG 8.28 | Finishing walls with water proofing cement paint of required shade: New work two coats applied at 4.84 Kg per 10 Sqm to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer incharge. | Sqm | 91.67 | 91.67 | 649.62 | False | None | None | False | None | False | 59550.6654 | 0 |
| 3039652 | 102647 | None | DVG 8.25 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade new work two coats over cand including water thinkable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer incharge | Sqm | 141.11 | 141.11 | 836.6201 | False | None | None | False | None | False | 118055.462311 | 0 |
| 3039653 | 102647 | None | DVG 8.41 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer incharge | Sqm | 172.01 | 172.01 | 63.88 | False | None | None | False | None | False | 10987.9988 | 0 |
| 3039654 | 102647 | None | DVG 11.6.2 | Supplying and fixing rolling shutters of approved make, made of required size m.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS 4454 part 1 and m.S. top cover of required thickness for rolling shutters. 80x1.20 mm m.S. laths with 1.20 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer inCharge | Sqm | 2578.09 | 2578.09 | 52.0 | False | None | None | False | None | False | 134060.68 | 0 |
| 3039655 | 102647 | None | DVG 10.14.16 | Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete.75mm weight of pipe 0.917 Kg | Each | 250.29 | 250.29 | 75.0 | False | None | None | False | None | False | 18771.75 | 0 |
| 3039656 | 102647 | None | DVG 8.33.3 | Painting Steel work with Deluxe multi Surface Paint to give an even shade. two coats applied at 0.90 litre per10 Sqm over an under coat of primer applied at 0.80 l per10 Sqm of approved brand and manufacture including preparing the surface after thoroughly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and asper directions of Engineer incharge. | Sqm | 143.17 | 143.17 | 16.7 | False | None | None | False | None | False | 2390.939 | 0 |
| 3039657 | 102647 | None | DVG 11.11.1 | Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side top centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design,sectional weight of only steel members shall be measured for payment | Kg | 152.44 | 152.44 | 622.76 | False | None | None | False | None | False | 94933.5344 | 0 |
| 3039658 | 102647 | None | DVG 12.57.6 | Providing and fixing flush door shutter made out of solid core block board type, well-seasoned , chemically treated hard wood battens andinternal frame with minimum 45 mm wide wooden frame all-rounddoor shutters covered with cross bonded wooden sheets core veneer hot pressed and fastened on both sides of the door using liquidphenol formaldehyde resin as per IS specifications 2202 part I 1991.from manufacturer complete as per specification do35 mm thick both side commercial. | Sqm | 3421.66 | 3421.66 | 4.41 | False | None | None | False | None | False | 15089.5206 | 0 |
| 3039659 | 102647 | None | DVG 12.13.2 | Providing Red Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves excluding cost of cement concrete and side clamps, but including cost of materials, labour, usage charges complete as per specifications. | Cum | 102588.0 | 102588.0 | 0.26 | False | None | None | False | None | False | 26672.88 | 0 |
| 3039660 | 102647 | None | DVG 12.53 | Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm m.S Square tube, the entire door frame to be reinforced with 19x19mm m.S Square tube of 19 gauge. the door frame to be fixed to the wall using m.S. Screws of 65 80mm size complete as per manufacturers specification and direction of Engineer incharge. | Sqm | 1635.64 | 1635.64 | 3.15 | False | None | None | False | None | False | 5152.266 | 0 |
| 3039661 | 102647 | None | DVG 12.54 | Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm m.S Square tube, the entire door frame to be reinforced with 19x19mm m.S Square tube of 19 gauge. the door frame to be fixed to the wall using m.S. Screws of 65 80mm size complete as per manufacturers specification and direction of Engineer incharge | Sqm | 327.54 | 327.54 | 146.7 | False | None | None | False | None | False | 48050.118 | 0 |
| 3039662 | 102647 | None | DVG 12.53 | Providing and fixing 30mm thick factory made rigid foam Panelled Door Shutters made from m.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top and bottom rails, covered with heat moulded PVC C channel of 5mm thick sheet & 30 x 50mm wide to form stiles and mm thick and 75mm wide PVC Sheets for top rail, lock rail and bottom rail on either side and 5mm thick 20mm wide PVC sheet as gap insert for top rail and bottom rail, panelling of 5mm thick PVC sheet fitted in the m.S. Frame, Sealed to the stiles and rails with 5x30mm PVC sheet beading on either side and joined together with solvent cement adhesive etc., Complete as per manufacturers specification and direction of Engineer incharge fixed to frames with 3 no of 75 mm Aluminium hinges. | Sqm | 1635.64 | 1635.64 | 47.25 | False | None | None | False | None | False | 77283.99 | 0 |
| 3039663 | 102647 | None | DVG 13.3.3 | Providing and fixing Chlorinated polyvinyl chloride CPVC pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fitting this includes jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of engineer in charge. 25 mm Outer dia. | m | 491.31 | 491.31 | 180.0 | False | None | None | False | None | False | 88435.8 | 0 |
| 3039664 | 102647 | None | DVG 13.3.2 | Providing and fixing Chlorinated polyvinyl chloride CPVC pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fitting this includes jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of engineer in charge. 20 mm Outer dia | m | 390.37 | 390.37 | 170.0 | False | None | None | False | None | False | 66362.9 | 0 |
| 3039665 | 102647 | None | DVG 20.1 | Supplying PVC pipes conforming to IS 16098 2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes with cost of elastomeric sealing rings and specials excluding cost of specials with jointing of approved type, with all labour, lead and lifts, including encasing the pipes around to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS contractor will make his own arrangements for procuring water for testing etc. | m | 275.87 | 275.87 | 180.0 | False | None | None | False | None | False | 49656.6 | 0 |
| 3039666 | 102647 | None | DVG 87.1 | Constructing brick masonry chamber of internal dimension 600x450mm and depth of 600mm inner dimensions with modular bricks of CD 75 in cement mortar 1 isto6, bed concrete 150mm thick with 1 3 6, plastering 12 mm thick with cement mortar 1 PER 4, CC 1 2 4 coping 75mm thk for fixing CI cover and frame etc. excluding the cost of CI frame and cover for | Each | 4934.73 | 4934.73 | 11.0 | False | None | None | False | None | False | 54282.03 | 0 |
| 3039667 | 102647 | None | DVG 14.10 .22 | Providing and fixing Stainless Steel A ISI 304 18 or 8 kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required 610x460 mm bowl depth 200 mm | Each | 2925.2 | 2925.2 | 2.0 | False | None | None | False | None | False | 5850.4 | 0 |
| 3039668 | 102647 | None | DVG 14.7.1 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps. | Each | 3174.46 | 3174.46 | 6.0 | False | None | None | False | None | False | 19046.76 | 0 |
| 3039669 | 102647 | None | DVG 13.4.1 | Providing and fixing Brass full way valve gate with C.I. wheel of approved quality screwed end 25 mm nominal bore. | Each | 565.47 | 565.47 | 14.0 | False | None | None | False | None | False | 7916.58 | 0 |
| 3039670 | 102647 | None | DVG 14.1.1 | Providing and fixing water closet squatting pan Indian type W.C. pan with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device handle lever conforming to IS 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White Vitreous China Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. | Each | 5030.52 | 5030.52 | 26.0 | False | None | None | False | None | False | 130793.52 | 0 |
| 3039671 | 102647 | None | DVG 8.14.2.1 | Providing and fixing white vitreous China pedestal type water closet European type W.C. pan with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device handle lever, conforming to IS 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid. | Each | 4983.14 | 4983.14 | 6.0 | False | None | None | False | None | False | 29898.84 | 0 |
| 3039672 | 102647 | None | DVG 14.4.1 | Providing and fixing white vitreous China flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required One urinal basin with 5 litre white P.V.C. automatic flushing cistern | Each | 4587.62 | 4587.62 | 10.0 | False | None | None | False | None | False | 45876.2 | 0 |
| 3039673 | 102647 | None | DVG 14.17.2 | Providing and fixing a pair of white vitreous China foot rests of standard pattern for squatting pan water closet 250 125 30 mm | Each | 208.0 | 208.0 | 9.0 | False | None | None | False | None | False | 1872.0 | 0 |
| 3039674 | 102647 | None | DVG 9.36 | providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1 isto 6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, including cost of materials, labour, curing, polishing complete as per specifications. | Sqm | 1653.0 | 1653.0 | 7.2 | False | None | None | False | None | False | 11901.6 | 0 |
| 3039675 | 102647 | None | DVG 13.12 | providing and fixing C.P. brass bib cock of approved quality conforming to IS 8931 | Each | 654.05 | 654.05 | 39.0 | False | None | None | False | None | False | 25507.95 | 0 |
| 3039676 | 102647 | None | DVG 13.15 | Providing and fixing C.P. brass stop cock concealed of standard design and of approved make conforming to IS 8931g | Each | 746.75 | 746.75 | 14.0 | False | None | None | False | None | False | 10454.5 | 0 |
| 3039677 | 102647 | None | DVG 13.34 | Providing and placing on terrace Chlorinated polyethylene water storage tank IS 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank | Ltr | 9.27 | 9.27 | 4500.0 | False | None | None | False | None | False | 41715.0 | 0 |
| 3039678 | 102647 | None | DVG 11.5.1 | Providing and fixing 1mm thick m.S. sheet door with frame of 40 40 6 mm angle iron and 3 mm m.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using m.S. angels 40 40 6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer inCharge. | Sqm | 4612.34 | 4612.34 | 2.21 | False | None | None | False | None | False | 10193.2714 | 0 |
| 3039679 | 102647 | None | DVG 2.1.1 2.1.2 2.1.3 | Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit casing capping using 1100V grade, COPPER conductor flexible multistrand FRlS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GtP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet gang box, the other end of the wires shall be terminated with sufficient loose length in a wood PVC round block. complete for Each outlet. GROUP A Short point up to 3m from tapping point to out let via switch | Point | 285.0 | 285.0 | 44.0 | False | None | None | False | None | False | 12540.0 | 0 |
| 3039680 | 102647 | None | DVG 2.1.1 | Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit casing capping using 1100V grade, COPPER conductor flexible multistrand FRlS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GtP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet gang box, the other end of the wires shall be terminated with sufficient loose length in a wood PVC round block. complete for Each outlet. GROUP A medium point above 3m up to 6m from tapping point to out let via switch | Point | 394.0 | 394.0 | 40.0 | False | None | None | False | None | False | 15760.0 | 0 |
| 3039681 | 102647 | None | DVG 2.1.1 | Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit casing capping using 1100V grade, COPPER conductor flexible multistrand FRlS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GtP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet gang box, the other end of the wires shall be terminated with sufficient loose length in a wood PVC round block. complete for Each outlet. GROUP A long point above 6m up to 10m from tapping point to out let via switch | Point | 570.0 | 570.0 | 24.0 | False | None | None | False | None | False | 13680.0 | 0 |
| 3039682 | 102647 | None | DVG 3.6.1 3.6.3 3.6.4, 3.6.8 3.6.11 | Supplying and fixing of modular switch socket and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch | No | 102.0 | 102.0 | 120.0 | False | None | None | False | None | False | 12240.0 | 0 |
| 3039683 | 102647 | None | DVG 3.6.1 | Supplying and fixing of modular switch socket and nnected accessories on existing modular switch plate as per IS 3854 and IS 1293. P 5, I. No 3.6.1, 3.6.3, 3.6.4, 3.6.8, 3.6.11 6A three Way socket | No | 171.0 | 171.0 | 45.0 | False | None | None | False | None | False | 7695.0 | 0 |
| 3039684 | 102647 | None | DVG 3.6.1 | Supplying and fixing of modular switch socket and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. P 5, I. No 3.6.1, 3.6.3, 3.6.4, 3.6.8, 3.6.11 16A One Way Switch | No | 180.0 | 180.0 | 35.0 | False | None | None | False | None | False | 6300.0 | 0 |
| 3039685 | 102647 | None | DVG 3.6.1 | Supplying and fixing of modular switch/ socket and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. P 5, I. No 3.6.1, 3.6.3, 3.6.4, 3.6.8, 3.6.11 6 or 16A Universal Socket | No | 236.0 | 236.0 | 24.0 | False | None | None | False | None | False | 5664.0 | 0 |
| 3039686 | 102647 | None | DVG 2.3.2 | Wiring for lighting or power circuit using one of FRlS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694 confirming to latest amendments. 1.5 mm2 | m | 26.0 | 26.0 | 460.0 | False | None | None | False | None | False | 11960.0 | 0 |
| 3039687 | 102647 | None | DVG 2.3.3 | Wiring for lighting or power circuit using one of FRlS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694 confirming to latest amendments. 2.5 mm2 | m | 42.0 | 42.0 | 545.0 | False | None | None | False | None | False | 22890.0 | 0 |
| 3039688 | 102647 | None | DVG 2.3.4 | Wiring for lighting or power circuit using one of FRlS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694 confirming to latest amendments. 4 mm2 | m | 63.0 | 63.0 | 595.0 | False | None | None | False | None | False | 37485.0 | 0 |
| 3039689 | 102647 | None | DVG 3.3.2 | Supplying and fixing surface flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick C.C wall, including necessary rawl plugs, machine NF screws etc., complete. 4-5 Way | Each | 137.0 | 137.0 | 15.0 | False | None | None | False | None | False | 2055.0 | 0 |
| 3039690 | 102647 | None | DVG 3.3.2 | Supplying and fixing surface flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick C.C wall, including necessary rawl plugs, machine NF screws etccomplete. 8 Way | Each | 219.0 | 219.0 | 8.0 | False | None | None | False | None | False | 1752.0 | 0 |
| 3039691 | 102647 | None | DVG 3.3.2 | Supplying and fixing surface flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick C.C wall, including necessary rawl plugs, machine NF screws etc complete. 6 Way | Each | 173.0 | 173.0 | 18.0 | False | None | None | False | None | False | 3114.0 | 0 |
| 3039692 | 102647 | None | DVG 3.3.2 | Supplying and fixing surface flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick C.C wall, including necessary rawl plugs, machine NF screws etc., complete. 4 or 5 Way | Each | 137.0 | 137.0 | 17.0 | False | None | None | False | None | False | 2329.0 | 0 |
| 3039693 | 102647 | None | DVG 12.46 | Supplying and Fixing of 70-150 W lamp holder 2 Pin | Each | 63.0 | 63.0 | 57.0 | False | None | None | False | None | False | 3591.0 | 0 |
| 3039694 | 102647 | None | DVG 3.3.5 | Supplying and fixing surface flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick C.C wall, including necessary rawl plugs, machine NF screws etc.complete.10 or 12 Way | Each | 261.0 | 261.0 | 8.0 | False | None | None | False | None | False | 2088.0 | 0 |
| 3039695 | 102647 | None | DVG 1.1.2 | Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc, and fixing using inverted wood plugs in case of RCC ceiling and RCC wall stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. 25 mm dia 2 mm thick | m | 81.0 | 81.0 | 670.0 | False | None | None | False | None | False | 54270.0 | 0 |
| 3039696 | 102647 | None | DVG 3.7 | Supplying and fixing 32A security and energy saving DP switch with key tag suitable to operate on 230V 50Hz AC supply & completely wired on existing box. | No | 646.0 | 646.0 | 15.0 | False | None | None | False | None | False | 9690.0 | 0 |
| 3039697 | 102647 | None | DVG 5.7.2 | Supplying and fixing of 32Amps Porcelain fuse channel with cut out on existing wooden panel using necessary nuts, bolts and washers. | No | 241.0 | 241.0 | 15.0 | False | None | None | False | None | False | 3615.0 | 0 |
| 3039698 | 102647 | None | DVG 5.17.6 | Supplying and fixing miniature circuit breakers on existing mCB distribution boards using necessary fixing materials and C type curve, indicator ON or OFF, energy cross 3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6 .32Amps DP. | No | 1102.0 | 1102.0 | 7.0 | False | None | None | False | None | False | 7714.0 | 0 |
| 3039699 | 102647 | None | DVG 5.17.6 | Supplying and fixing miniature circuit breakers on existing mCB distribution boards using necessary fixing materials and C type curve, indicator ON or OFF, energy cross 3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.50-63Amps DP. | Nos | 739.0 | 739.0 | 5.0 | False | None | None | False | None | False | 3695.0 | 0 |
| 3039700 | 102647 | None | DVG 376.1 | thermoplastic modular mCB Distribution box enclosure with transparent polycarbonate lid 1 row 12 module with hinged flap | No | 4360.0 | 4360.0 | 4.0 | False | None | None | False | None | False | 17440.0 | 0 |
| 3039701 | 102647 | None | DVG 5.14.9 | Supplying and fixing moulded Case Circuit Breaker mCCB over the existing wood panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in thermal magnetic Release. microprocessor release shall have Earth Fault as per IS 13947.Icu 100 lcs. In 4P mCCB, all Poles should have protection for Short Circuit Over load. For microprocessor mCCBS Facility for segregating Priority and Non-Priority loads must be available in the mCCB. mCCB shall be provided with double insulation insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open. multi pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. FOUR Pole 160 A 25 kA | No | 13447.0 | 13447.0 | 3.0 | False | None | None | False | None | False | 40341.0 | 0 |
| 3039702 | 102647 | None | DVG 376.1 | thermoplastic modular mCB Distribution box enclosure with transparent polycarbonate lid 1 row 12 module with hinged flap | No | 4360.0 | 4360.0 | 6.0 | False | None | None | False | None | False | 26160.0 | 0 |
| 3039703 | 102647 | None | DVG 12.25.2 | Supplying of patty fitting, made out of CRCA Sheet metal body with locking type holder completely wired with HF Electronic Ballast, Operating voltage range from 180V to 265V, 50Hz AC power supply excluding tube. 1 x 4 tube light fitting. | No | 340.0 | 340.0 | 37.0 | False | None | None | False | None | False | 12580.0 | 0 |
| 3039704 | 102647 | None | DVG 12.12.1 | Supplying and fixing replacing of fluorescent tube. 18 to 40W | No | 95.0 | 95.0 | 37.0 | False | None | None | False | None | False | 3515.0 | 0 |
| 3039705 | 102647 | None | DVG 11.2.2 | Supplying and fixing retrofit type Pl lED lamp W lED linear source with CCt 6500-degree K, CRI 70. efficacy 80 lumen per W, life 25000 burning hours and Compliance to IS 10322 IEC 60598, lm 79 and lm 80. the lED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, tHD less than 20, life as per lm 79. the operating input voltage should be between 130 to275 V. tested by NABl CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.18 or 20 W | No | 702.0 | 702.0 | 39.0 | False | None | None | False | None | False | 27378.0 | 0 |
| 3039706 | 102647 | None | DVG 2.1 | Digging of trench of 0.6m deep x 0.50 m wide refilling the trench to the required ground level and consolidating etc.complete. CC Cutting | m | 205.0 | 205.0 | 99.0 | False | None | None | False | None | False | 20295.0 | 0 |
| 3039707 | 102647 | None | DVG 430.1 | Earthing supplying fixing and wiring earth electrode for grounding circuits IC cut outs and other equipment on the meter board in the pit the pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. the connections from the pipe to the conduits etc. is established through G I wire of sizes as per clause 7.3.3 of is 732using 12mm bolts nuts and check nuts the pipe shall have 16 through holes of 12mm dia | Job | 3510.0 | 3510.0 | 7.0 | False | None | None | False | None | False | 24570.0 | 0 |
| 3039708 | 102647 | None | DVG 6.5.1 | labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe stoneware pipe on wall on pole as required. In existing trench duct. 6 Sqmm to 16 Sqmm | m | 11.88 | 11.88 | 12.0 | False | None | None | False | None | False | 142.56 | 0 |
| 3039709 | 102647 | None | DVG 7.20.1 | Supply and laying double walled corrugated DWC HDPE Pipe including all necessary connecting Sockets Couplings tees Bends End caps of same materials in existing trench as per IS 14930 part II suitable for drawing underground cables. 40mm OD or 32mm ID | m | 98.0 | 98.0 | 12.0 | False | None | None | False | None | False | 1176.0 | 0 |
| 3039710 | 102647 | None | DVG 6.2.2 | Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC supply complete. 15 inch sweep 450mm | No | 4446.0 | 4446.0 | 3.0 | False | None | None | False | None | False | 13338.0 | 0 |
| 3039711 | 102647 | None | DVG 13.14 | Fixing one exhaust fan in the nitch already left in wall with bolts and nuts and 5 A celling rose with suffecent length of 23 , 0.0076 inch PVC insulated tin core wire | Each | 492.0 | 492.0 | 3.0 | False | None | None | False | None | False | 1476.0 | 0 |
| 3039712 | 102647 | None | DVG 4.1 | Providing and fixing board displaying information, such as Name of work, tender cost, Name of Contractor, Work completion and liability period etc, having rectangular shape of 1.20m x 0.90m size made out 18 gauge 1.25mm thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border messages symbols etc. with approved colour shade paint complete, on m.S.angle of size 35 x 35 x 3 mm frame with properly cross braced m.S. angles of size 35mmx35mmx3mm duly painted including two m.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc. And fixing the boards in 1 4 8 concrete block of size 60 cm 60 cm 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge & moRtH specification 804 | Each | 9270.0 | 9270.0 | 7.0 | False | None | None | False | None | False | 64890.0 | 0 |
| 3039713 | 102647 | None | DVG 3.1 | Removal of Unserviceable Soil with Disposal up to a suitable distance as directed by the Engineer in charge of work | Cum | 87.55 | 87.55 | 219.02 | False | None | None | False | None | False | 19175.201 | 0 |
| 3039714 | 102647 | None | DVG 8.07 | Providing and erecting overhead signs with a corrosion resistant 2mm thick aluminium alloy sheet reflectorised with high intensity retro-reflective sheeting of encapsulated lens type with vertical and lateral clearance given in clause 802.2 and 802.3 and installed as per clause 802.7 over a designed support system of aluminium alloy or galvanised steel trestles and trusses of sections and type as per structural design requirements and approved plans & as per IRC 67 | t | 89122.81 | 89122.81 | 14.06 | False | None | None | False | None | False | 1253066.7086 | 0 |
| 3039715 | 102647 | None | DVG 8.1 | B. Aluminium Alloy Plate for Overhead for two Over Head welcome signs | Sqm | 5992.54 | 5992.54 | 112.0 | False | None | None | False | None | False | 671164.48 | 0 |
| 3039716 | 102647 | None | DVG 8.2 | Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces | Sqm | 112.27 | 112.27 | 58.5 | False | None | None | False | None | False | 6567.795 | 0 |
| 3039717 | 102647 | None | DVG 8.11 | Providing and applying two coats of ready mix paint of approved brand on steel surface after thorough cleaning of surface to give an even shade | Each | 98.88 | 98.88 | 250.32 | False | None | None | False | None | False | 24751.6416 | 0 |
| 3039718 | 102647 | None | DVG 11.35.2.1 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections appropriate sections and other sections of approved make conforming to IS 733 and IS 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDm rubber neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleatangle, Aluminium snap beading for glazing paneling, C.P. brass stainless steel screws, all complete as per architectural drawings and the directions of Engineer incharge. Glazing, paneling and dash fasteners to be paid for separately For shutters of doors, windows and ventilators including providing and fixing hinges pivots and making provision for fixing of fittings wherever required including the cost of EPDm rubber neoprene gasket required Fittings shall be paid for separately Anodised aluminium anodised transparent or dyed to required shade according to ISm 1868, minimum anodic coating of grade AC 15 including cost of materials,labour,usage charges of machinery complete as per specifications. | Kg | 550.02 | 550.02 | 282.56 | False | None | None | False | None | False | 155413.6512 | 0 |
| 3039719 | 102647 | None | DVG 11.36.2 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS 12823 Grade l type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass stainless steel screws etc. complete as per architectural drawings and directions of engineer incharge Pre laminated particle board with decorative lamination on one side and balancing lamination on other side including cost of materials, labour, usage charges of machinery complete as per specifications. | Sqm | 1012.49 | 1012.49 | 41.76 | False | None | None | False | None | False | 42281.5824 | 0 |
| 3039720 | 102647 | None | DVG 20.2.2 | Float glass panes of nominal thickness 5 mm
weight not less than 12.5 Kg per Sqm | Sqm | 1140.21 | 1140.21 | 38.28 | False | None | None | False | None | False | 43647.2388 | 0 |
| 3039721 | 102647 | None | DVG 11.16.2 | Providing and fixing Steel work in built up tubular round, square or rectangular hollow tubes etc. trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer inCharge. | Kg | 151.41 | 151.41 | 4637.84 | False | None | None | False | None | False | 702215.3544 | 0 |
| 3039722 | 102647 | None | DVG 7.38 | Providing and fixing precoated galvanised iron profile sheets size, shape and pitch of corrugation as approved by Engineer incharge 0.50 mm plus 0.05 percent total coated thickness with zinc coating 120 grams per m2 as per IS 277, in 240 mpa steel grade, 5 and 7 microns epoxy primer on both side of the sheet and polyester top coat 15 and18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12m or as desired by Engineer incharge. the sheet shall be fixed using self drilling self tapping screws of size 5.5x 55 mm with EPDm seal, complete upto any pitch in horizontal vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | m | 585.04 | 585.04 | 462.0 | False | None | None | False | None | False | 270288.48 | 0 |
| 3039723 | 102647 | None | DVG 7.39.6 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm plus0.05 percent total coated thickness, Zinc coating 120 grams per Sqm as per IS 277, in 240 mpa steel grade, 5and 7 microns epoxy primer on both side of the sheet and polyester top coat 15 and 18 microns using self drilling self tapping screws complete Gutter 600 mm over all girth | m | 1106.22 | 1106.22 | 40.0 | False | None | None | False | None | False | 44248.8 | 0 |
| 3039724 | 102647 | None | DVG 7.38 | Providing and fixing precoated galvanised iron profile sheets size, shape and pitch of corrugation as approved by Engineer incharge 0.50 mm plus 0.05 percent cated thickness with zinc coating 120 grams per m2 as per I 277, in 240 mpa steel grade, 5and7 microns epoxy primer on both side of the sheet and polyester top coat 1518 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12m or as desired by Engineer incharge. the sheet shall be fixed using self drillin self tapping screws of size 5.5x 55 mm with EPDm seal, complete upto any pitch in horizonta vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | m | 464.53 | 464.53 | 21.0 | False | None | None | False | None | False | 9755.13 | 0 |