createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1710451140625 version 2 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 7500.00 emd 2280000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 15-04-2024 16:30:00 tenderQueryClose 22-03-2024 17:00:00 technicalBidOpen 17-04-2024 11:30:00 publishedDate 15-03-2024 04:59:14 publishedByPost KIADB_CE_HOD_BNG publishedByUser KPE10847 - VEERABADRAIAH B R bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate 26-03-2024 12:00:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Technical Assistant splitEmdRequiredYn True emdBankGuarantee 2180000.00 emdCash 100000.00 bgValidityPeriod 135 hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed None highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08022265383 mobileNumber None tenderSupplierList None
tenderSchedule	createdTs 1710451140661 version 4 createdDate None modifiedDate None tenderNumber KIADB/2023-24/BD/WORK_INDENT122 title Construction of additional 4th, 5th & Terrace Floors with completion of balance works for G PLUS 3 Floors for KIADB Multistoried Office Building, Gandhinagar, Bengaluru. description Construction of additional 4th, 5th & Terrace Floors with completion of balance works for G PLUS 3 Floors for KIADB Multistoried Office Building, Gandhinagar, Bengaluru. category WORKS categoryText Works ecv 227913075.07 deptName Karnataka Industrial Areas Development Board status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn False location 5699 locationName KIADB Head Office Bangalore provisionalAmount 228000000.0 groupOverheadTotal None fileNumber 198/2023-24
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1710451141000 0 None None Buildings Construction of additional 4th, 5th & Terrace Floors with completion of balance works for G PLUS 3 Floors for KIADB Multistoried Office Building, Gandhinagar, Bengaluru. 227913075.07 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3080507 105621 None code01 Civil: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. for 4th floor. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Tonne 120759.79 120759.79 64.75 False None None False None False 7819196.4025 0 3080508 105621 None code02 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.for 5th floor. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Tonne 121920.95 121920.95 64.75 False None None False None False 7894381.5125 0 3080509 105621 None code03 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.for terrace complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Tonne 123082.1 123082.1 8.0 False None None False None False 984656.8 0 3080510 105621 None code04 Column Centering for 4th Floor complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 7107.87 7107.87 53.43 False None None False None False 379773.4941 0 3080511 105621 None code05 Column Centering for 5th floor complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 7176.21 7176.21 53.43 False None None False None False 383424.9003 0 3080512 105621 None code06 Column Centering for terrace complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 8241.38 8241.38 19.07 False None None False None False 157163.1166 0 3080513 105621 None code07 Roof Beam Centering for 4th floor. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 5423.25 5423.25 88.25 False None None False None False 478601.8125 0 3080514 105621 None code08 Roof Beam Centering for 5th floor complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 5474.9 5474.9 88.25 False None None False None False 483159.925 0 3080515 105621 None code09 Roof Slab Centering, for 4th floor. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 4519.38 4519.38 114.28 False None None False None False 516474.7464 0 3080516 105621 None code10 Roof Slab Centering for 5th flo0r. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 4562.42 4562.42 114.28 False None None False None False 521393.3576 0 3080517 105621 None code11 Staircase Centering for 4th floor. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 4476.33 4476.33 7.82 False None None False None False 35004.9006 0 3080518 105621 None code12 Staircase Centering for 5th floor. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 4519.38 4519.38 7.82 False None None False None False 35341.5516 0 3080519 105621 None code13 Staircase Centering for terrace.complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 4562.42 4562.42 7.82 False None None False None False 35678.1244 0 3080520 105621 None code14 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M 40 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for 4th floor. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Cum 10154.1 10154.1 52.43 False None None False None False 532379.463 0 3080521 105621 None code15 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M 40 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for 5th floor. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Cum 10251.73 10251.73 52.43 False None None False None False 537498.2039 0 3080522 105621 None code16 Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in all types of Structures other than Road works, using coarse aggregate and fine aggregate derived from natural sources, Ordinary Portland Cement (OPC) @ 75% & GGBS @ 25% proportion, admixtures to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the Engineer-in-charge. RMC M30 Grade for 4th floor. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Cum 8952.67 8952.67 208.2 False None None False None False 1863945.894 0 3080523 105621 None code17 Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in all types of Structures other than Road works, using coarse aggregate and fine aggregate derived from natural sources, Ordinary Portland Cement (OPC) @ 75% & GGBS @ 25% proportion, admixtures to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the Engineer-in-charge. RMC M30 Grade for 5th floor complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Cum 9038.75 9038.75 208.2 False None None False None False 1881867.75 0 3080524 105621 None code18 Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in all types of Structures other than Road works, using coarse aggregate and fine aggregate derived from natural sources, Ordinary Portland Cement (OPC) @ 75% & GGBS @ 25% proportion, admixtures to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the Engineer-in-charge. RMC M30 Grade for terrace. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Cum 9124.84 9124.84 26.74 False None None False None False 243998.2216 0 3080525 105621 None code19 Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks as per IS 2185 (Part III) in super structure above plinth level up to floor I level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. for 4th floor. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Cum 10769.66 10769.66 108.0 False None None False None False 1163123.28 0 3080526 105621 None code20 Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks as per IS 2185 (Part III) in super structure above plinth level up to floor I level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. for 5th floor. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Cum 10873.22 10873.22 108.0 False None None False None False 1174307.76 0 3080527 105621 None code21 Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks as per IS 2185 (Part III) in super structure above plinth level up to floor I level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. for terrace.complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Cum 10976.77 10976.77 83.0 False None None False None False 911071.91 0 3080528 105621 None code22 Providing and laying Autoclaved Aerated Cement blocks masonry with 100 mm thick AAC blocks as per IS 2185 (Part III) in super structure above plinth level up to floor I level in cement mortar 1:4 (1 cement : 4 coarse sand ) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. for 4th floor. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Cum 11551.27 11551.27 115.0 False None None False None False 1328396.05 0 3080529 105621 None code23 Providing and laying Autoclaved Aerated Cement blocks masonry with 100 mm thick AAC blocks as per IS 2185 (Part III) in super structure above plinth level up to floor I level in cement mortar 1:4 (1 cement : 4 coarse sand ) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. for 5th floor. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Cum 11662.34 11662.34 115.0 False None None False None False 1341169.1 0 3080530 105621 None code24 Providing and laying Autoclaved Aerated Cement blocks masonry with 100 mm thick AAC blocks as per IS 2185 (Part III) in super structure above plinth level up to floor I level in cement mortar 1:4 (1 cement : 4 coarse sand ) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. for Terrace. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Cum 11773.41 11773.41 115.0 False None None False None False 1353942.15 0 3080531 105621 None code25 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge - for 4th floor. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 436.02 436.02 1145.0 False None None False None False 499242.9 0 3080532 105621 None code26 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge for 5th floor. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 440.22 440.22 1145.0 False None None False None False 504051.9 0 3080533 105621 None code27 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge for terrace. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 444.41 444.41 506.0 False None None False None False 224871.46 0 3080534 105621 None code28 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge for 4th floor. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 284.83 284.83 774.0 False None None False None False 220458.42 0 3080535 105621 None code29 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge for 5th floor.complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 287.57 287.57 782.0 False None None False None False 224879.74 0 3080536 105621 None code30 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge for terrace. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 290.31 290.31 200.0 False None None False None False 58062.0 0 3080537 105621 None code31 Doors for 4th ,5th and Terrace Floors.complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 64900.0 64900.0 62.0 False None None False None False 4023800.0 0 3080538 105621 None code32 Flush doors for 4th ,5th and Terrace Floors.complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 9440.0 9440.0 130.0 False None None False None False 1227200.0 0 3080539 105621 None code33 Providing and Applying CFTRI approved two component flexible polymer modified acrylic cementitious waterproofing coating with a mix ratio of (1 Liquid: 2 Powder), to the RCC surface like bathroom, toilet, balcony & utility area applied @ 1.7kg/m2 in 2 coats to achieve 1mm DFT, having Elongation at break greater than50% as per ASTM D 412, Tensile strength greater than1N/ mm2 as per ASTM D 412, Adhesion strength: 0.80 N/mm2 as per ASTM D 4541, crack bridging upto 1mm as per ASTM C 836, Water penetration (5 bar pressure) as per BS EN 12390. The finished cost to include surface preparation, making coving of 50 mm X 50mm at all right angles of wall Junction with Polymer Repair Mortar and lay 45 gsm glass fibre mesh over the angle fillet when the first coat in still wet, treatment of cracks completely as per specification.for 4th floor. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 495.42 495.42 62.0 False None None False None False 30716.04 0 3080540 105621 None code34 Providing and Applying CFTRI approved two component flexible polymer modified acrylic cementitious waterproofing coating with a mix ratio of (1 Liquid: 2 Powder), to the RCC surface like bathroom, toilet, balcony & utility area applied @ 1.7kg/m2 in 2 coats to achieve 1mm DFT, having Elongation at break greater than50% as per ASTM D 412, Tensile strength greater than1N/ mm2 as per ASTM D 412, Adhesion strength: 0.80 N/mm2 as per ASTM D 4541, crack bridging upto 1mm as per ASTM C 836, Water penetration (5 bar pressure) as per BS EN 12390. The finished cost to include surface preparation, making coving of 50 mm X 50mm at all right angles of wall Junction with Polymer Repair Mortar and lay 45 gsm glass fibre mesh over the angle fillet when the first coat in still wet, treatment of cracks completely as per specification.for 5th floor. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 500.18 500.18 74.0 False None None False None False 37013.32 0 3080541 105621 None code35 Providing and Applying CFTRI approved two component flexible polymer modified acrylic cementitious waterproofing coating with a mix ratio of (1 Liquid: 2 Powder), to the RCC surface like bathroom, toilet, balcony & utility area applied @ 1.7kg/m2 in 2 coats to achieve 1mm DFT, having Elongation at break greater than50% as per ASTM D 412, Tensile strength greater than1N/ mm2 as per ASTM D 412, Adhesion strength: 0.80 N/mm2 as per ASTM D 4541, crack bridging upto 1mm as per ASTM C 836, Water penetration (5 bar pressure) as per BS EN 12390. The finished cost to include surface preparation, making coving of 50 mm X 50mm at all right angles of wall Junction with Polymer Repair Mortar and lay 45 gsm glass fibre mesh over the angle fillet when the first coat in still wet, treatment of cracks completely as per specification.for terrace.complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 504.95 504.95 48.0 False None None False None False 24237.6 0 3080542 105621 None code36 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. .complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 1124.09 1124.09 248.0 False None None False None False 278774.32 0 3080543 105621 None code37 Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete Flooring - Cabins and workstations (size 1000x1000mm).for 4th floor. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 2475.75 2475.75 634.0 False None None False None False 1569625.5 0 3080544 105621 None code38 Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete Flooring - Cabins and workstations (size 1000x1000mm).for 5th floor. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 2499.56 2499.56 635.0 False None None False None False 1587220.6 0 3080545 105621 None code39 Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete Flooring - Cabins and workstations (size 1000x1000mm).for terrace.complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 2523.36 2523.36 656.0 False None None False None False 1655324.16 0 3080546 105621 None code40 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete.for 4th floor.complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 1195.88 1195.88 223.0 False None None False None False 266681.24 0 3080547 105621 None code41 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete.for 5th floor.complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 1206.37 1206.37 277.0 False None None False None False 334164.49 0 3080548 105621 None code42 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete.for terrace.complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 1216.86 1216.86 164.0 False None None False None False 199565.04 0 3080549 105621 None code43 Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 (1 cement : 3 coarse sand) proportion with a coat of rough plastering using CM 1:4 (1 cement : 4 fine sand), cut to required shape, pattern with paper joints, finished with cement mortar using white cement and colour pigments to match the colour of slab making through jointing with sealant, grooves in joints including cost of curing etc., complete including cost and conveyance of all materials, mortar, labour for all items of work, usage charges of machinery etc., complete as per specification.for 2B+G.complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 4681.89 4681.89 45.0 False None None False None False 210685.05 0 3080550 105621 None code44 Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 (1 cement : 3 coarse sand) proportion with a coat of rough plastering using CM 1:4 (1 cement : 4 fine sand), cut to required shape, pattern with paper joints, finished with cement mortar using white cement and colour pigments to match the colour of slab making through jointing with sealant, grooves in joints including cost of curing etc., complete including cost and conveyance of all materials, mortar, labour for all items of work, usage charges of machinery etc., complete as per specification.for 1st floor.complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 4728.7 4728.7 15.0 False None None False None False 70930.5 0 3080551 105621 None code45 Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 (1 cement : 3 coarse sand) proportion with a coat of rough plastering using CM 1:4 (1 cement : 4 fine sand), cut to required shape, pattern with paper joints, finished with cement mortar using white cement and colour pigments to match the colour of slab making through jointing with sealant, grooves in joints including cost of curing etc., complete including cost and conveyance of all materials, mortar, labour for all items of work, usage charges of machinery etc., complete as per specification.for 2nd floor.complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 4775.52 4775.52 15.0 False None None False None False 71632.8 0 3080552 105621 None code46 Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 (1 cement : 3 coarse sand) proportion with a coat of rough plastering using CM 1:4 (1 cement : 4 fine sand), cut to required shape, pattern with paper joints, finished with cement mortar using white cement and colour pigments to match the colour of slab making through jointing with sealant, grooves in joints including cost of curing etc., complete including cost and conveyance of all materials, mortar, labour for all items of work, usage charges of machinery etc., complete as per specification.for 3rd floor.complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 4822.34 4822.34 15.0 False None None False None False 72335.1 0 3080553 105621 None code47 Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 (1 cement : 3 coarse sand) proportion with a coat of rough plastering using CM 1:4 (1 cement : 4 fine sand), cut to required shape, pattern with paper joints, finished with cement mortar using white cement and colour pigments to match the colour of slab making through jointing with sealant, grooves in joints including cost of curing etc., complete including cost and conveyance of all materials, mortar, labour for all items of work, usage charges of machinery etc., complete as per specification.for 4th floor.complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 4869.16 4869.16 15.0 False None None False None False 73037.4 0 3080554 105621 None code48 Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 (1 cement : 3 coarse sand) proportion with a coat of rough plastering using CM 1:4 (1 cement : 4 fine sand), cut to required shape, pattern with paper joints, finished with cement mortar using white cement and colour pigments to match the colour of slab making through jointing with sealant, grooves in joints including cost of curing etc., complete including cost and conveyance of all materials, mortar, labour for all items of work, usage charges of machinery etc., complete as per specification.for 5th floor.complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 4915.98 4915.98 15.0 False None None False None False 73739.7 0 3080555 105621 None code49 Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 (1 cement : 3 coarse sand) proportion with a coat of rough plastering using CM 1:4 (1 cement : 4 fine sand), cut to required shape, pattern with paper joints, finished with cement mortar using white cement and colour pigments to match the colour of slab making through jointing with sealant, grooves in joints including cost of curing etc., complete including cost and conveyance of all materials, mortar, labour for all items of work, usage charges of machinery etc., complete as per specification.for terrace.complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 4962.8 4962.8 15.0 False None None False None False 74442.0 0 3080556 105621 None code50 Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Including providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in Granite, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. fixing granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete..complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 5457.5 5457.5 63.0 False None None False None False 343822.5 0 3080557 105621 None code51 Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth.complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 3291.02 3291.02 9.0 False None None False None False 29619.18 0 3080558 105621 None code52 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 3200.87 3200.87 192.0 False None None False None False 614567.04 0 3080559 105621 None code53 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 L/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.for 4th floor. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 210.59 210.59 2249.0 False None None False None False 473616.91 0 3080560 105621 None code54 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 L/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.for 5th floor. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 212.61 212.61 2250.0 False None None False None False 478372.5 0 3080561 105621 None code55 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 L/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.for terrace. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 214.64 214.64 933.0 False None None False None False 200259.12 0 3080562 105621 None code56 Supplying and fixing in position Staircase Railing at all levels made out of SS tubular box sections and 8mm Thick SS Wires, as per detailed design & drawing, including all necessary bracket, fixtures, bolts etc and fixed on side Riser by drilling into the RCC steps with SS plate Screwed and grouting the SS sections to achieve strength. The SS railing to be supplied with Matt Finish as specified Sample to be executed for approval if necessary. Grade of SS shall be 304. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge m 1416.0 1416.0 68.0 False None None False None False 96288.0 0 3080563 105621 None code57 Providing 15 mm cement plaster on rough side wall finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. for 4th floor. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 494.07 494.07 488.0 False None None False None False 241106.16 0 3080564 105621 None code58 Providing 15 mm cement plaster on rough side wall finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. for 5th floor. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 498.82 498.82 488.0 False None None False None False 243424.16 0 3080565 105621 None code59 Providing 15 mm cement plaster on rough side wall finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.for terrace. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 503.57 503.57 290.0 False None None False None False 146035.3 0 3080566 105621 None code60 Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. for 4th floor.complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 382.03 382.03 488.0 False None None False None False 186430.64 0 3080567 105621 None code61 Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. for 5th floor. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 385.7 385.7 488.0 False None None False None False 188221.6 0 3080568 105621 None code62 Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.for terrace. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 389.37 389.37 290.0 False None None False None False 112917.3 0 3080569 105621 None code63 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. for 4th floor. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 225.44 225.44 85.0 False None None False None False 19162.4 0 3080570 105621 None code64 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. for 5th floor.complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 227.6 227.6 85.0 False None None False None False 19346.0 0 3080571 105621 None code65 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. for terrace.complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 229.77 229.77 29.0 False None None False None False 6663.33 0 3080572 105621 None code66 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size - 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&Ps shall not be made) complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 6996.22 6996.22 64.0 False None None False None False 447758.08 0 3080573 105621 None code67 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size - 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&Ps shall not be made) complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 8740.73 8740.73 135.0 False None None False None False 1179998.55 0 3080574 105621 None code68 WATER SUPPLY: Supply , Installing, testing and commissioning approved makewhite colour European water closet(suite) constellation series wall mounted pattern type P or S trap with 6/3 Lts.Capacity porcelain close coupled cistern tank with all internal fittings of the cistern. The quoted price shall also include 1no. 15mm CP angle cock, CP Inlet connection pipe, CP wall flange,colour plastic solid seat and cover with rubber buffers and flap, heavy duty plastic hinges & anchor bolts etc., complete. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 8850.0 8850.0 45.0 False None None False None False 398250.0 0 3080575 105621 None code69 Supply , Installation, testing and commissioning of approved make 15mm CP health faucet with one no. of CP angle cock, CP flexible tube 1.0m long, CP crutch, nozzle etc., complete.complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 1624.86 1624.86 45.0 False None None False None False 73118.7 0 3080576 105621 None code70 Supply , Installation, testing and commissioning of CP toilet paper holder fixed with counter sunk SS screws complete..complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 1336.53 1336.53 45.0 False None None False None False 60143.85 0 3080577 105621 None code71 Supply , Installation, testing and commissioning of approved make 15mm CP hose bib with necessary CP wall flanges etc., complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 1652.0 1652.0 45.0 False None None False None False 74340.0 0 3080578 105621 None code72 Supply , Installing, testing and commissioning approved make Wash basin  white colour fixed under counter with  15mm C.P. pillar cock unit 32mm dia CP waste coupling,32 mm dia heavy duty CP bottle trap with extension pipe, CP wall flanges, 1 No.15mm dia C.P. angle cocks, 1 no.C.P. flexible inlet connection pipes, CI brackets etc.,complete including silicon sealant.complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 5310.0 5310.0 55.0 False None None False None False 292050.0 0 3080579 105621 None code73 Supply , Installing, testing and commissioning approved make oval Handwash  white colour fixed under counter with  15mm C.P. pillar cock unit 32mm dia CP waste coupling,32 mm dia heavy duty CP bottle trap with extension pipe, CP wall flanges, 1 No.15mm dia C.P. angle cocks, 1 no.C.P. flexible inlet connection pipes, CI brackets etc.,complete including silicon sealant.complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 5486.29 5486.29 4.0 False None None False None False 21945.16 0 3080580 105621 None code74 Supply , Fixing approved make CP towel ring fixed on to wall by using with SS screws etc complete.complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 1180.0 1180.0 18.0 False None None False None False 21240.0 0 3080581 105621 None code75 Supply , Installation of Soap Dispenser with necessary fixing material paper roll All necessary item required to complete install the Fixture etc. Complete .complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 2150.55 2150.55 35.0 False None None False None False 75269.25 0 3080582 105621 None code76 Supply , Installation, Testing & Commissioning of C.P.Gratings for floor trap with all necessary items .complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 266.03 266.03 50.0 False None None False None False 13301.5 0 3080583 105621 None code77 Supply , Installation , testing and commissioning of stainless steel sink with oval Single bowl 42 x 20 x 9 of approved size manufactured from 1mm thick stainless steel, 18/8 grade SS-304 indestructible chrome nickel steel with top quality polish, with bottle trap , 40 mm dia CP waste coupling with extension flexible pipe/ UPVC rigid pipe connection of suitable dia, Table mounted single lever sink mixer with regular Swinging Spout for hot & cold water with wall flanges, etc., complete & filling with necessary sealants. Supply and fixing of granite counter shall be done by the external agency. .complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 8850.0 8850.0 6.0 False None None False None False 53100.0 0 3080584 105621 None code78 Supply , Installation, of Urinal HPL Partition moulding to outer edge size 0.45m x 1.2m inserted 12 mm inside wall .complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 5310.0 5310.0 33.0 False None None False None False 175230.0 0 3080585 105621 None code79 Supply , Installation of white vitreous China battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, All necessary item required to complete install the Fixture to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. .complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 13766.71 13766.71 33.0 False None None False None False 454301.43 0 3080586 105621 None code80 Supply , Installation , testing and commissioning of approved make hand drier of approved colour having twin blower integrated with timer cum infrared sensing system fully automatic which can work on 230 volts, single phase, 50 cycles etc., complete .complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 3540.0 3540.0 12.0 False None None False None False 42480.0 0 3080587 105621 None code81 Supply , Installation , testing and commissioning of 75mm X 75mm floor grating of CP ring and grate with necessary fixing materials and cement concrete all-round the trap for collection of Waste water etc., complete .complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 944.0 944.0 24.0 False None None False None False 22656.0 0 3080588 105621 None code82 Supply Installation of Gyeser of 5 L capacity , complete .complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 8850.0 8850.0 3.0 False None None False None False 26550.0 0 3080589 105621 None code83 INTERNAL SOIL AND WASTE PIPE SYSTEM: Supplying, laying, jointing, testing and commissioning approved make PVC pipes class III 6 Kg/cm2 with solvent cement joints confirming to IS 4985 for Washing Machine & wash basin outlets. The quoted rate shall include necessary chisling in walls making good the same in C.M. 1:4, encasing the pipes in toilet sunken and under ground in M-15 as per specifications 100 mm thk. all around with necessary shuttering arrangement, necessary fittings viz.,elbows,tees etc.complete. 40mm dia.complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Rmtr 708.0 708.0 60.0 False None None False None False 42480.0 0 3080590 105621 None code84 Supplying, laying, jointing, testing and commissioning approved make PVC pipes class III 6 Kg/cm2 with solvent cement joints confirming to IS 4985 for Washing Machine & wash basin outlets. The quoted rate shall include necessary chisling in walls making good the same in C.M. 1:4, encasing the pipes in toilet sunken and under ground in M-15 as per specifications 100 mm thk. all around with necessary shuttering arrangement, necessary fittings viz.,elbows,tees etc.complete. 50mm dia.complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Rmtr 826.0 826.0 70.0 False None None False None False 57820.0 0 3080591 105621 None code85 Supplying, laying, jointing, testing and commissioning approved make PVC pipes SWR grade confirming to IS 13592 Class B with solvent joints confirming to IS 5382 for solvent jointing for Suspended piping in ceiling Lvl. The quoted rate shall include necessary fittings like Tees, 45 or 90 deg. Bends, Couplers, Offsets, etc., G.I. brackets with pvc coated GI clamps, nuts & bolts, anchor fasteners, grip bolts, GI threaded, rods, etc., complete.75mm dia.complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Rmtr 1652.0 1652.0 220.0 False None None False None False 363440.0 0 3080592 105621 None code86 Supplying, laying, jointing, testing and commissioning approved make PVC pipes SWR grade confirming to IS 13592 Class B with solvent joints confirming to IS 5382 for solvent jointing for Suspended piping in ceiling Lvl. The quoted rate shall include necessary fittings like Tees, 45 or 90 deg. Bends, Couplers, Offsets, etc., G.I. brackets with pvc coated GI clamps, nuts & bolts, anchor fasteners, grip bolts, GI threaded, rods, etc., complete.110mm dia.complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Rmtr 2242.0 2242.0 145.0 False None None False None False 325090.0 0 3080593 105621 None code87 Supplying, installing, testing and commissioning of approved make PVC Pipes 10kg (Solvent joint). The fittings and specials such as tees, elbows, couplers, bends, enlargers etc.,where connection with metal is to be made including necessary drilling holes, chasing brick walls/ RCC walls and making the same good in cement mortar 1 : 1 restore the same original condition neatly as directed by the Engineer in - charge. Including hanger supports, grip bolts & Clamps etc.,25mm dia .complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Rmtr 295.0 295.0 110.0 False None None False None False 32450.0 0 3080594 105621 None code88 Supplying, laying, jointing, testing and comissioning of approved make PVC multifloor trap with required concrete encasing all around, complete.110 x 75 mm dia (50 mm water seal) .complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 1062.0 1062.0 120.0 False None None False None False 127440.0 0 3080595 105621 None code89 Supplying, laying, jointing, testing and comissioning of approved make PVC floor drain with C P grating with required concrete encasing all around, complete. 110 x 75 mm dia (20 mm water seal) Balconcy - Nahi trap .complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 885.0 885.0 30.0 False None None False None False 26550.0 0 3080596 105621 None code90 Supplying & fixing of PVC self cleansing type nahani trap with outlet confirming to IS 14735 with necessary cement concrete , with or without vent arm, etc., complete as per specifications including cutting and making good and complete.110 mm x 75 mm dia.complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 739.15 739.15 125.0 False None None False None False 92393.75 0 3080597 105621 None code91 Drilling with core cutting machine in RCC beams, slabs, floors etc., for alying pipes and rendering the same in RCC 1:2:4, finishing the same to the satisfication of the owner or his authorised representative etc., including nominal reniforcement wherever required complete.65 mm dia .complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 1430.51 1430.51 2.0 False None None False None False 2861.02 0 3080598 105621 None code92 Drilling with core cutting machine in RCC beams, slabs, floors etc., for alying pipes and rendering the same in RCC 1:2:4, finishing the same to the satisfication of the owner or his authorised representative etc., including nominal reniforcement wherever required complete.110 mm dia .complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 1487.86 1487.86 16.0 False None None False None False 23805.76 0 3080599 105621 None code93 Drilling with core cutting machine in RCC beams, slabs, floors etc., for alying pipes and rendering the same in RCC 1:2:4, finishing the same to the satisfication of the owner or his authorised representative etc., including nominal reniforcement wherever required complete.125 mm dia.complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 1629.64 1629.64 15.0 False None None False None False 24444.6 0 3080600 105621 None code94 Supplying, Installaing, Testing & Commissioning of approved make Balcony rainwater outlet with 75 mm dia PVC bend & SS grating on top including fixing in cement mortar 1:4 and Bore Packing etc., complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 366.39 366.39 30.0 False None None False None False 10991.7 0 3080601 105621 None code95 VERTICAL SOIL AND WASTE PIPE SYSTEM: Supplying, laying, jointing, testing and commissioning approved make PVC pipes SWR grade confirming to IS 13592 Class B with rubber ring joints confirming to IS 5382 for exposed piping in shaft .The quoted rate shall include necessary fittings like Tees, 45 or 90 deg. Bends, Couplers, Offsets, etc., G.I. brackets with pvc coated GI clamps, nuts & bolts, anchor fasteners, grip bolts, GI threaded, rods, etc., complete. (External piping in shaft ). , as directed by Engineer-in-Charge. 110 mm dia(Soil Pipe).complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Rmtr 2242.0 2242.0 150.0 False None None False None False 336300.0 0 3080602 105621 None code96 Supplying, laying, jointing, testing and commissioning approved make PVC pipes SWR grade confirming to IS 13592 Class B with rubber ring joints confirming to IS 5382 for exposed piping in shaft .The quoted rate shall include necessary fittings like Tees, 45 or 90 deg. Bends, Couplers, Offsets, etc., G.I. brackets with pvc coated GI clamps, nuts & bolts, anchor fasteners, grip bolts, GI threaded, rods, etc., complete. (External piping in shaft ). , as directed by Engineer-in-Charge. 160 mm dia(Soil Pipe).complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Rmtr 2761.2 2761.2 55.0 False None None False None False 151866.0 0 3080603 105621 None code97 Supplying, laying, jointing, testing and commissioning approved make PVC pipes SWR grade confirming to IS 13592 Class B with rubber ring joints confirming to IS 5382 for exposed piping in shaft .The quoted rate shall include necessary fittings like Tees, 45 or 90 deg. Bends, Couplers, Offsets, etc., G.I. brackets with pvc coated GI clamps, nuts & bolts, anchor fasteners, grip bolts, GI threaded, rods, etc., complete. (External piping in shaft ). , as directed by Engineer-in-Charge.63 mm dia ( Vent).complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Rmtr 1528.1 1528.1 95.0 False None None False None False 145169.5 0 3080604 105621 None code98 Supplying, laying, jointing, testing and commissioning approved make PVC pipes SWR grade confirming to IS 13592 Class B with rubber ring joints confirming to IS 5382 for exposed piping in shaft .The quoted rate shall include necessary fittings like Tees, 45 or 90 deg. Bends, Couplers, Offsets, etc., G.I. brackets with pvc coated GI clamps, nuts & bolts, anchor fasteners, grip bolts, GI threaded, rods, etc., complete. (External piping in shaft ). , as directed by Engineer-in-Charge.75 mm dia (Vent Pipe).complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Rmtr 1652.0 1652.0 190.0 False None None False None False 313880.0 0 3080605 105621 None code99 Supplying, laying, jointing, testing and commissioning approved make PVC pipes SWR grade confirming to IS 13592 Class B with rubber ring joints confirming to IS 5382 for exposed piping in shaft .The quoted rate shall include necessary fittings like Tees, 45 or 90 deg. Bends, Couplers, Offsets, etc., G.I. brackets with pvc coated GI clamps, nuts & bolts, anchor fasteners, grip bolts, GI threaded, rods, etc., complete. (External piping in shaft ). , as directed by Engineer-in-Charge.110 mm dia.complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Rmtr 2242.0 2242.0 45.0 False None None False None False 100890.0 0 3080606 105621 None code100 Supplying, laying, jointing, testing and commissioning approved make PVC vent cowl.63 mm dia.complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 236.0 236.0 10.0 False None None False None False 2360.0 0 3080607 105621 None code101 Supplying, laying, jointing, testing and commissioning approved make PVC vent cowl.75 mm dia.complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 354.0 354.0 15.0 False None None False None False 5310.0 0 3080608 105621 None code102 Supplying, laying, jointing, testing and commissioning approved make PVC vent cowl.110 mm dia.complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 826.0 826.0 18.0 False None None False None False 14868.0 0 3080609 105621 None code103 Supplying, laying, jointing, testing and commissioning approved make PVC vent cowl.160 mm dia.complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 944.0 944.0 4.0 False None None False None False 3776.0 0 3080610 105621 None code104 INTERNAL WATER SUPPLY SYSTEM: Supply, installating, fixing, jointing, testing and commissioning of approved make Polyethylene/Aluminium/Polyethylene (PE-AL-PE) co-extruded composite piping system of small diameter for the conveyance of hot and cold water supply for various requirements as mentioned in the IS:15450 :2004. The PE-AL-PE pipe shall be composed of one metallic layer, two layers of the same polymeric adhesive and two layers of same polyethylene. The inner and outer PE layers-shall be bonded to metallic layer (aluminium tube) by polymeric adhesive during extrusion process. They shall stay in shape and do not sag under hot and cold fluid conditions and are suitable for both vertical and horizontal run. These pipes shall be tested for sustained pressure performance requirement at 95 degree C for 170 h. The thermal pressure resistance shall be higher than HDPE and PVC pipes. The quoted rate shall include pressure testing.20 mm dia .complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Rmtr 495.6 495.6 325.0 False None None False None False 161070.0 0 3080611 105621 None code105 Supply, installating, fixing, jointing, testing and commissioning of approved make Polyethylene/Aluminium/Polyethylene (PE-AL-PE) co-extruded composite piping system of small diameter for the conveyance of hot and cold water supply for various requirements as mentioned in the IS:15450 :2004. The PE-AL-PE pipe shall be composed of one metallic layer, two layers of the same polymeric adhesive and two layers of same polyethylene. The inner and outer PE layers-shall be bonded to metallic layer (aluminium tube) by polymeric adhesive during extrusion process. They shall stay in shape and do not sag under hot and cold fluid conditions and are suitable for both vertical and horizontal run. These pipes shall be tested for sustained pressure performance requirement at 95 degree C for 170 h. The thermal pressure resistance shall be higher than HDPE and PVC pipes. The quoted rate shall include pressure testing.25 mm dia .complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Rmtr 607.7 607.7 285.0 False None None False None False 173194.5 0 3080612 105621 None code106 Supply, installating, fixing, jointing, testing and commissioning of approved make Polyethylene/Aluminium/Polyethylene (PE-AL-PE) co-extruded composite piping system of small diameter for the conveyance of hot and cold water supply for various requirements as mentioned in the IS:15450 :2004. The PE-AL-PE pipe shall be composed of one metallic layer, two layers of the same polymeric adhesive and two layers of same polyethylene. The inner and outer PE layers-shall be bonded to metallic layer (aluminium tube) by polymeric adhesive during extrusion process. They shall stay in shape and do not sag under hot and cold fluid conditions and are suitable for both vertical and horizontal run. These pipes shall be tested for sustained pressure performance requirement at 95 degree C for 170 h. The thermal pressure resistance shall be higher than HDPE and PVC pipes. The quoted rate shall include pressure testing. 32 mm dia .complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Rmtr 708.0 708.0 20.0 False None None False None False 14160.0 0 3080613 105621 None code107 Supply, installating, fixing, jointing, testing and commissioning of approved make Polyethylene/Aluminium/Polyethylene (PE-AL-PE) co-extruded composite piping system of small diameter for the conveyance of hot and cold water supply for various requirements as mentioned in the IS:15450 :2004. The PE-AL-PE pipe shall be composed of one metallic layer, two layers of the same polymeric adhesive and two layers of same polyethylene. The inner and outer PE layers-shall be bonded to metallic layer (aluminium tube) by polymeric adhesive during extrusion process. They shall stay in shape and do not sag under hot and cold fluid conditions and are suitable for both vertical and horizontal run. These pipes shall be tested for sustained pressure performance requirement at 95 degree C for 170 h. The thermal pressure resistance shall be higher than HDPE and PVC pipes. The quoted rate shall include pressure testing. 40 mm dia .complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Rmtr 1109.2 1109.2 70.0 False None None False None False 77644.0 0 3080614 105621 None code108 Supplying, installing, testing and commissioning of approved make full way lever operated forged brass ball valve of brass body with forged brass hard chromeplated steel ball tested to a pressure not less than 20 Kg / sqcm with threaded joints complete.. 25 mm dia .complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 1416.0 1416.0 85.0 False None None False None False 120360.0 0 3080615 105621 None code109 Supplying, installing, testing and commissioning of approved make full way lever operated forged brass ball valve of brass body with forged brass hard chromeplated steel ball tested to a pressure not less than 20 Kg / sqcm with threaded joints complete.. 32 mm dia .complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 1534.0 1534.0 2.0 False None None False None False 3068.0 0 3080616 105621 None code110 VERTICAL SHAFT & TERRACE - WATER SUPPLY SYSTEM: Supplying, installing, testing and commissioning of approved make uPVC Pipes as per ASTM D 1785 Schedule 40 with schedule 80 specials (solvent joint) confirming to IS:554 .The fittings and specials such as tees, elbows, couplers, bends, enlargers etc., with uPVC brass threaded combination / transition specials such as male adapters brass threaded female adapters, brass FPT Tee, elbows, bends etc., The specials & fittings for Sch 80 pipe such as couplers, elbows, tees, unions, hex adaptor, end plug & caps, pipe clip & bend 90 etc., where connection with metal is to be made including necessary drilling holes, chasing walls and making the same good in cement mortar 1 : 1 restore the same original condition neatly as directed by the Engineer in - charge .Including hanger supports, grip bolts & Clamps etc., 25 mm dia .complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Rmtr 506.57 506.57 65.0 False None None False None False 32927.05 0 3080617 105621 None code111 Supplying, installing, testing and commissioning of approved make uPVC Pipes as per ASTM D 1785 Schedule 40 with schedule 80 specials (solvent joint) confirming to IS:554 .The fittings and specials such as tees, elbows, couplers, bends, enlargers etc., with uPVC brass threaded combination / transition specials such as male adapters brass threaded female adapters, brass FPT Tee, elbows, bends etc., The specials & fittings for Sch 80 pipe such as couplers, elbows, tees, unions, hex adaptor, end plug & caps, pipe clip & bend 90 etc., where connection with metal is to be made including necessary drilling holes, chasing walls and making the same good in cement mortar 1 : 1 restore the same original condition neatly as directed by the Engineer in - charge .Including hanger supports, grip bolts & Clamps etc., 32 mm dia .complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Rmtr 637.2 637.2 65.0 False None None False None False 41418.0 0 3080618 105621 None code112 Supplying, installing, testing and commissioning of approved make uPVC Pipes as per ASTM D 1785 Schedule 40 with schedule 80 specials (solvent joint) confirming to IS:554 .The fittings and specials such as tees, elbows, couplers, bends, enlargers etc., with uPVC brass threaded combination / transition specials such as male adapters brass threaded female adapters, brass FPT Tee, elbows, bends etc., The specials & fittings for Sch 80 pipe such as couplers, elbows, tees, unions, hex adaptor, end plug & caps, pipe clip & bend 90 etc., where connection with metal is to be made including necessary drilling holes, chasing walls and making the same good in cement mortar 1 : 1 restore the same original condition neatly as directed by the Engineer in - charge .Including hanger supports, grip bolts & Clamps etc., 40 mm dia .complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Rmtr 853.85 853.85 70.0 False None None False None False 59769.5 0 3080619 105621 None code113 Supplying, installing, testing and commissioning of approved make uPVC Pipes as per ASTM D 1785 Schedule 40 with schedule 80 specials (solvent joint) confirming to IS:554 .The fittings and specials such as tees, elbows, couplers, bends, enlargers etc., with uPVC brass threaded combination / transition specials such as male adapters brass threaded female adapters, brass FPT Tee, elbows, bends etc., The specials & fittings for Sch 80 pipe such as couplers, elbows, tees, unions, hex adaptor, end plug & caps, pipe clip & bend 90 etc., where connection with metal is to be made including necessary drilling holes, chasing walls and making the same good in cement mortar 1 : 1 restore the same original condition neatly as directed by the Engineer in - charge .Including hanger supports, grip bolts & Clamps etc., 50 mm dia-PRM line .complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Rmtr 1244.13 1244.13 165.0 False None None False None False 205281.45 0 3080620 105621 None code114 Supplying, installing, testing and commissioning of approved make uPVC Pipes as per ASTM D 1785 Schedule 40 with schedule 80 specials (solvent joint) confirming to IS:554 .The fittings and specials such as tees, elbows, couplers, bends, enlargers etc., with uPVC brass threaded combination / transition specials such as male adapters brass threaded female adapters, brass FPT Tee, elbows, bends etc., The specials & fittings for Sch 80 pipe such as couplers, elbows, tees, unions, hex adaptor, end plug & caps, pipe clip & bend 90 etc., where connection with metal is to be made including necessary drilling holes, chasing walls and making the same good in cement mortar 1 : 1 restore the same original condition neatly as directed by the Engineer in - charge .Including hanger supports, grip bolts & Clamps etc., 65 mm dia- Terrace Ring Main .complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Rmtr 2230.2 2230.2 135.0 False None None False None False 301077.0 0 3080621 105621 None code115 Supplying, installing and testing approved make Brass ball valves PN 10 conforming to IS 1703 with unions etc., complete. 25 mm dia (Screwed ends) .complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 874.56 874.56 10.0 False None None False None False 8745.6 0 3080622 105621 None code116 Supplying, installing and testing approved make Brass ball valves PN 10 conforming to IS 1703 with unions etc., complete. 32 mm dia (Screwed ends) .complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 952.61 952.61 10.0 False None None False None False 9526.1 0 3080623 105621 None code117 Supplying, installing, testing and commissioning of CI butterfly valves PN 10 with standard lever confirming to IS standard 13039 with necessary flanges, nuts and bolts etc., complete. 50 mm dia - PRM .complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 5575.5 5575.5 6.0 False None None False None False 33453.0 0 3080624 105621 None code118 Supplying, installing, testing and commissioning of CI butterfly valves PN 10 with standard lever confirming to IS standard 13039 with necessary flanges, nuts and bolts etc., complete. 65 mm dia -Terrace Ring .complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 7004.42 7004.42 15.0 False None None False None False 105066.3 0 3080625 105621 None code119 Supplying, installing, testing and commissioning of CI butterfly valves PN 10 with standard lever confirming to IS standard 13039 with necessary flanges, nuts and bolts etc., complete. 80 mm dia -Terrace Ring .complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 11879.0 11879.0 5.0 False None None False None False 59395.0 0 3080626 105621 None code120 Providing, fixing, testing and commissioning of Brass body nickel plated automatic air release valves with necessary GI Specials, thread, holdtite, brass spindle, NBR and elastomeric, stainless steel spring polypropylenic float at the top most points of water supply distribution ring main. 20 mm dia.complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 1991.25 1991.25 16.0 False None None False None False 31860.0 0 3080627 105621 None code121 Supplying, installing, testing and commissioning of approved make CI body NRV (PN 10) with necessary flanges , & other accessories etc., complete. 65 mm dia - Terrcae Pump Delivery. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 3878.96 3878.96 4.0 False None None False None False 15515.84 0 3080628 105621 None code122 Providing & fixing suction CI body Y strainer (PN 10) with MS flange of suitable length fabricated from 16 gauge SS sheet with 3 mm slots with necessary nuts and bolts, neoprene rubber gaskets, flanges etc, complete. 80 mm dia - Pump Suctioncomplete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 13062.6 13062.6 1.0 False None None False None False 13062.6 0 3080629 105621 None code123 Supplying and laying of P.C.C support blocks of 1 : 2 : 4 concrete mix of sizes as given below for pipe supports at terrace level to run the terrace water supply pipes with necessary shuttering, plastering, pipe fixing anchors etc., complete as per specifications. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Cum 2230.2 2230.2 80.0 False None None False None False 178416.0 0 3080630 105621 None code124 Supplying, installing ,testing and commissioning of Pressure gauges of suitable range for pump sets and pipe lines with Ball valves, siphon, Fittings like unions / colours / reducers etc. Glycerine filled pressure gauges to use on pump discharge lines.- 80/65 mm dia complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 3213.08 3213.08 6.0 False None None False None False 19278.48 0 3080631 105621 None code125 RAIN WATER & BALCONCY: Supply, fixing and testing of PVC rain water down take pipes Type A (SWR) confirming to IS 13592 : 1992, with solvent joint inclusive of all necessary specials like clean outs, bends, tees, offsets, door ends, junctions, cowls, etc., laid under floor/ under ceiling /fixed on walls, and in pipe shafts etc., complete. The quoted rate should include necessary, scaffolding, MS Brackets of suitable size, GI U clamps with bolts, nuts and GI washers, chasing the walls, making bore in walls, and making good the chased surfaces and bores, curing etc., complete.110 mm dia Terrace Rain water complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Rmtr 2242.0 2242.0 90.0 False None None False None False 201780.0 0 3080632 105621 None code126 Supply, fixing and testing of PVC rain water down take pipes Type A (SWR) confirming to IS 13592 : 1992, with solvent joint inclusive of all necessary specials like clean outs, bends, tees, offsets, door ends, junctions, cowls, etc., laid under floor/ under ceiling /fixed on walls, and in pipe shafts etc., complete. The quoted rate should include necessary, scaffolding, MS Brackets of suitable size, GI U clamps with bolts, nuts and GI washers, chasing the walls, making bore in walls, and making good the chased surfaces and bores, curing etc., complete.110 mm dia Balconcy Rain water complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Rmtr 2242.0 2242.0 85.0 False None None False None False 190570.0 0 3080633 105621 None code127 Supplying, fixing, testing and commissioning of leaf trap with kurra made out of PVC/FRP with aluminium grating for rainwater outlets on terrace including all necessary grouting 110 mm dia complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 5310.0 5310.0 5.0 False None None False None False 26550.0 0 3080634 105621 None code128 PUMP ROOM: Supplying, laying, jointing, testing &commissioning approved make class B G.I. pipes and fittings confirming to IS 1239 PI & II, malleable fittings viz., tees, elbows, flanges, unions etc.,including cutting threading, fixing terrace floor etc., as per drawings. The quoted rate shall include necessary making bores in walls,etc., a coat of including Painting. 100 mm dia. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Rmtr 2389.5 2389.5 35.0 False None None False None False 83632.5 0 3080635 105621 None code129 Supplying, laying, jointing, testing &commissioning approved make class B G.I. pipes and fittings confirming to IS 1239 PI & II, malleable fittings viz., tees, elbows, flanges, unions etc.,including cutting threading, fixing terrace floor etc., as per drawings. The quoted rate shall include necessary making bores in walls,etc., a coat of including Painting. 80 mm dia. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Rmtr 1734.78 1734.78 30.0 False None None False None False 52043.4 0 3080636 105621 None code130 Supplying, installing, testing and commissioning of approved make butterfly valve (upto 150mm dia with hand lever operation & above with gear box operation). Tested to a pressure not less than 16 Kg/Sq.cm. Including rubber gasket, G.I. flanges, G.I. nuts, G.I. bolts, G.I. washers & painting complete as required. 100 mm dia complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 15237.05 15237.05 5.0 False None None False None False 76185.25 0 3080637 105621 None code131 Supplying, installing, testing and commissioning of approved make butterfly valve (upto 150mm dia with hand lever operation & above with gear box operation). Tested to a pressure not less than 16 Kg/Sq.cm. Including rubber gasket, G.I. flanges, G.I. nuts, G.I. bolts, G.I. washers & painting complete as required. 80 mm dia (PRM to Header) complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 11879.0 11879.0 5.0 False None None False None False 59395.0 0 3080638 105621 None code132 Supplying, installing, testing and commissioning of approved make butterfly valve (upto 150mm dia with hand lever operation & above with gear box operation). Tested to a pressure not less than 16 Kg/Sq.cm. Including rubber gasket, G.I. flanges, G.I. nuts, G.I. bolts, G.I. washers & painting complete as required.50 mm dia complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 5575.5 5575.5 5.0 False None None False None False 27877.5 0 3080639 105621 None code133 Providing & fixing of heavy quality Non Return valve of gun metal / brass body with screwed 15kg class as per details mentioned in approved materials list etc. complete (For solar water inlet pipe) 80 mm dia (PRM to Header) complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 13540.5 13540.5 4.0 False None None False None False 54162.0 0 3080640 105621 None code134 Supplying, installing, testing and commissioning approved make Y strainer with necessary nuts & bolts etc.,complete. 100mm dia complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 19976.22 19976.22 1.0 False None None False None False 19976.22 0 3080641 105621 None code135 Supply, fabrication, fixing, testing and commissioning of GI Class C puddle flanged pipes of required sizes for inlet, outlet, vent and overflow pipes for Over Head, UG Sump Tank, STP . The puddle flanged pipes shall be threaded end upto 80 mm dia and flanged ends above 100 mm dia. All the puddle flanged pipes, plates and fittings shall be galvanized after fabrication as per IS specifications: PUDDLE FLANGE - FOR OHT LENGTH OF PUDDLE FLANGE 500 MM,Approx. depth = 3.00 Mts. C.I. manhole frame and cover (medium duty-100 kgs )-600mm x600mm size Inlet puddle flanges, 200 mm dia complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 3504.6 3504.6 3.0 False None None False None False 10513.8 0 3080642 105621 None code136 Supply, fabrication, fixing, testing and commissioning of GI Class C puddle flanged pipes of required sizes for inlet, outlet, vent and overflow pipes for Over Head, UG Sump Tank, STP . The puddle flanged pipes shall be threaded end upto 80 mm dia and flanged ends above 100 mm dia. All the puddle flanged pipes, plates and fittings shall be galvanized after fabrication as per IS specifications: PUDDLE FLANGE - FOR OHT LENGTH OF PUDDLE FLANGE 500 MM,Approx. depth = 3.00 Mts. C.I. manhole frame and cover (medium duty-100 kgs )-600mm x600mm size Inlet puddle flanges, 150 mm dia complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 3186.0 3186.0 3.0 False None None False None False 9558.0 0 3080643 105621 None code137 Supply, fabrication, fixing, testing and commissioning of GI Class C puddle flanged pipes of required sizes for inlet, outlet, vent and overflow pipes for Over Head, UG Sump Tank, STP . The puddle flanged pipes shall be threaded end upto 80 mm dia and flanged ends above 100 mm dia. All the puddle flanged pipes, plates and fittings shall be galvanized after fabrication as per IS specifications: PUDDLE FLANGE - FOR OHT LENGTH OF PUDDLE FLANGE 500 MM,Approx. depth = 3.00 Mts. C.I. manhole frame and cover (medium duty-100 kgs )-600mm x600mm size Inlet puddle flanges, 100 mm dia complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 2773.0 2773.0 5.0 False None None False None False 13865.0 0 3080644 105621 None code138 Supply, fabrication, fixing, testing and commissioning of GI Class C puddle flanged pipes of required sizes for inlet, outlet, vent and overflow pipes for Over Head, UG Sump Tank, STP . The puddle flanged pipes shall be threaded end upto 80 mm dia and flanged ends above 100 mm dia. All the puddle flanged pipes, plates and fittings shall be galvanized after fabrication as per IS specifications: PUDDLE FLANGE - FOR OHT LENGTH OF PUDDLE FLANGE 500 MM,Approx. depth = 3.00 Mts. C.I. manhole frame and cover (medium duty-100 kgs )-600mm x600mm size Inlet puddle flanges, 80 mm dia complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 2548.8 2548.8 6.0 False None None False None False 15292.8 0 3080645 105621 None code139 Supply, fabrication, fixing, testing and commissioning of GI Class C puddle flanged pipes of required sizes for inlet, outlet, vent and overflow pipes for Over Head, UG Sump Tank, STP . The puddle flanged pipes shall be threaded end upto 80 mm dia and flanged ends above 100 mm dia. All the puddle flanged pipes, plates and fittings shall be galvanized after fabrication as per IS specifications: PUDDLE FLANGE - FOR OHT LENGTH OF PUDDLE FLANGE 500 MM,Approx. depth = 3.00 Mts. C.I. manhole frame and cover (medium duty-100 kgs )-600mm x600mm size Inlet puddle flanges, 65 mm dia. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 2230.2 2230.2 4.0 False None None False None False 8920.8 0 3080646 105621 None code140 Supply, fabrication, fixing, testing and commissioning of GI Class C puddle flanged pipes of required sizes for inlet, outlet, vent and overflow pipes for Over Head, UG Sump Tank, STP . The puddle flanged pipes shall be threaded end upto 80 mm dia and flanged ends above 100 mm dia. All the puddle flanged pipes, plates and fittings shall be galvanized after fabrication as per IS specifications: PUDDLE FLANGE - FOR OHT LENGTH OF PUDDLE FLANGE 500 MM,Approx. depth = 3.00 Mts. C.I. manhole frame and cover (medium duty-100 kgs )-600mm x600mm size Inlet puddle flanges, 50 mm dia. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 1911.6 1911.6 5.0 False None None False None False 9558.0 0 3080647 105621 None code141 Supply, fabrication, fixing, testing and commissioning of GI Class C puddle flanged pipes of required sizes for inlet, outlet, vent and overflow pipes for Over Head, UG Sump Tank, STP . The puddle flanged pipes shall be threaded end upto 80 mm dia and flanged ends above 100 mm dia. All the puddle flanged pipes, plates and fittings shall be galvanized after fabrication as per IS specifications: PUDDLE FLANGE - FOR OHT LENGTH OF PUDDLE FLANGE 500 MM,Approx. depth = 3.00 Mts. C.I. manhole frame and cover (medium duty-100 kgs )-600mm x600mm size Outlet puddle flanges , 100 mm dia. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 2867.4 2867.4 6.0 False None None False None False 17204.4 0 3080648 105621 None code142 Supply, fabrication, fixing, testing and commissioning of GI Class C puddle flanged pipes of required sizes for inlet, outlet, vent and overflow pipes for Over Head, UG Sump Tank, STP . The puddle flanged pipes shall be threaded end upto 80 mm dia and flanged ends above 100 mm dia. All the puddle flanged pipes, plates and fittings shall be galvanized after fabrication as per IS specifications: PUDDLE FLANGE - FOR OHT LENGTH OF PUDDLE FLANGE 500 MM,Approx. depth = 3.00 Mts. C.I. manhole frame and cover (medium duty-100 kgs )-600mm x600mm size Outlet puddle flanges , 80 mm dia. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 2548.8 2548.8 6.0 False None None False None False 15292.8 0 3080649 105621 None code143 Swan neck bend for Vent pipe with mosquito proof mesh (100mm dia) complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 1652.0 1652.0 4.0 False None None False None False 6608.0 0 3080650 105621 None code144 Swan neck bend for Vent pipe with mosquito proof mesh (80mm dia) complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 1534.0 1534.0 4.0 False None None False None False 6136.0 0 3080651 105621 None code145 Supplying, installing, testing and commissioning of inlet, outlet, vent and overflow pipes, fittings with CI frame and cover for following sizes to overhead water tank, UG Tank, Storm water, waste water collection sump complete with step irons as shown on the drawings etc., complete, accessories comprising of the following : 600 x 600 - CI manhole frame and cover as per IS 3989 -1984 (21kgs.) - OHT complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 5310.0 5310.0 8.0 False None None False None False 42480.0 0 3080652 105621 None code146 Supply, installation, testing & commissioning of Microprocessor based fully automatic Electronic water level controller with indicator and the following parameters facility: 1) Auto. 2) Manual 3) Sump Low. 4) Sump high. 5) Over head Tank Low. 6) Over Head Tank High. 7) Pump on. 8) Pump Fault. 9) Water flow indication. 10) Voltage display. Etc., with float switch (PVC Moulded Magnetic Float Sensors ) of approved make as required by the site engineer. (Including the wiring of 6 Core 0.75 sqmm / cat 6 cable with 25mm dia PVC conduit). complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Each 14750.0 14750.0 4.0 False None None False None False 59000.0 0 3080653 105621 None code147 Supplying, installing, testing and commissioning approved make centrifugal pump made of SS Construction suitable for building application. Thequoted rate shall also include for auto lvl.controller. providing necessary safety devices viz. dry run protection, over load relays etc., complete working on 230V, 50Hz, 3Ph, with starter, Duty of pumps : 6 Cum/Hr @ 65m Head complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Set 229805.0 229805.0 1.0 False None None False None False 229805.0 0 3080654 105621 None code148 Supplying, installing, testing and commissioning approved make dewatering submersible pump made of SS Construction suitable for building application. Thequoted rate shall also include for auto lvl.controller. providing necessary safety devices viz. dry run protection, over load relays etc., complete working on 230V, 50Hz, 3Ph, with starter, Duty of pumps : 5 Cum/Hr @ 20m Headcomplete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Set 79650.0 79650.0 3.0 False None None False None False 238950.0 0 3080655 105621 None code149 Supplying, Installing, testing and commissioning approved make Terrace booster pump system comprising of Vertical Centrifugal pump mounted on a skid with company supplied automatic control panel overload relays,on-off push button switches, phase including indicator lamps,dry run protection relays, pressure Switches &guages, 1no. FRP pressure vessel of 24 Lts. Cap.The pump shall run on 440V, 3ph, 50Hz electricsupply etc., complete(Terrace Booster Pump) Duty of pumps : 3.0 Cum/hr@35m head cut - in pressure = 3.0Bars cut - off pressure = 4.0Bars complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Set 112985.0 112985.0 1.0 False None None False None False 112985.0 0 3080656 105621 None code150 EXTERNAL SEWAGE SYSTEM: Supplying, fixing and testing RCC/ PVC gully trap chamber of internal size 300 mm x 300 mm with rebated top square shape 150 mm x 150 mm x100 mm dia outlet set in 75 mm thick PCC 1 : 4 : 8 bed, construction of 230 mm thick masonry chamber in CM 1 : 4, with internal plastering of 12 mm thk in CM 1 : 3 and external plastering 12 mm thick in CM 1 : 6, including finishing smooth inside surface of the chamber with cement rendering with necessary benching and channelling, supply and fixing of 450 mm x 450 mm size CI frame and cover (weight of frame and cover not less than 10 Kgs.) / FRP Cover set in PCC 1 : 2 : 4 as per the detailed drawing .The quoted rate shall also include necessary excavation, backfilling, ramming, disposing off surplus earth etc., complete as per specifications & drawing or as instructed from EIC. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Each 4033.48 4033.48 8.0 False None None False None False 32267.84 0 3080657 105621 None code151 Construction of inspection chamber with 230 mm thick best quality masonary blocks in CM 1 : 4 laid over a bed of 150 mm thick PCC 1 : 4 : 8, walls plastered smooth, internal plastering 12 mm thk in CM 1 : 3 and external plastering 12 mm thick in CM 1 : 6 including finishing smooth inside surface of the chamber with cement rendering, curing etc. The quoted rate to include excavation in all types of soil, necessary wooden / steel form work, back filling of the chamber sides with the excavated soil, disposing of the surplus earth after back filling with initial lead of 30 metres or as directed, including, lift, benching and channelling shall be finished smooth, in PCC 1 : 2 : 4. Providing and fixing ofRCC Cover SFRC manhole frame and cover, set in PCC 1 : 2 : 4 with Thermo plastic moulded steps for chambers beyond 900 mm dept.\h etc., complete as per specifications and drawings or as instructed from EIC .Inside size of 450 x 450 mm & depth not exceeding 500 mm complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Each 8850.0 8850.0 4.0 False None None False None False 35400.0 0 3080658 105621 None code152 Construction of inspection chamber with 230 mm thick best quality masonary blocks in CM 1 : 4 laid over a bed of 150 mm thick PCC 1 : 4 : 8, walls plastered smooth, internal plastering 12 mm thk in CM 1 : 3 and external plastering 12 mm thick in CM 1 : 6 including finishing smooth inside surface of the chamber with cement rendering, curing etc. The quoted rate to include excavation in all types of soil, necessary wooden / steel form work, back filling of the chamber sides with the excavated soil, disposing of the surplus earth after back filling with initial lead of 30 metres or as directed, including, lift, benching and channelling shall be finished smooth, in PCC 1 : 2 : 4. Providing and fixing ofRCC Cover SFRC manhole frame and cover, set in PCC 1 : 2 : 4 with Thermo plastic moulded steps for chambers beyond 900 mm dept.\h etc., complete as per specifications and drawings or as instructed from EIC .Inside size of 600 x 600 mm & depth exceeding 450 Up to 750 mm complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Each 13640.86 13640.86 12.0 False None None False None False 163690.32 0 3080659 105621 None code153 Construction of inspection chamber with 230 mm thick best quality masonary blocks in CM 1 : 4 laid over a bed of 150 mm thick PCC 1 : 4 : 8, walls plastered smooth, internal plastering 12 mm thk in CM 1 : 3 and external plastering 12 mm thick in CM 1 : 6 including finishing smooth inside surface of the chamber with cement rendering, curing etc. The quoted rate to include excavation in all types of soil, necessary wooden / steel form work, back filling of the chamber sides with the excavated soil, disposing of the surplus earth after back filling with initial lead of 30 metres or as directed, including, lift, benching and channelling shall be finished smooth, in PCC 1 : 2 : 4. Providing and fixing ofRCC Cover SFRC manhole frame and cover, set in PCC 1 : 2 : 4 with Thermo plastic moulded steps for chambers beyond 900 mm dept.\h etc., complete as per specifications and drawings or as instructed from EIC .Inside size of 900 x 900 mm & depth 751mm to 1200 mm, with PVC rungs. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Each 17926.03 17926.03 3.0 False None None False None False 53778.09 0 3080660 105621 None code154 Construction of Conical manhole with 230 mm thick best quality masonary blocks in CM 1 : 4, 600 mm dia at top and 1200 mm dia at bottom clear. The bed concrete shall be minimum 150 mm. The manhole shall be constructed over a bed of 150 mm thick PCC 1 : 4 : 8, walls plastered smooth, internal plastering 12 mm thk in CM 1 : 3 and external plastering 12mm thick in CM 1 : 6 including finishing smooth inside surface of the chamber with cement rendering, water proofing compound as per manufactures specification, including curing. The quoted rate to include excavation in all types of soil including soft and hard rock, necessary wooden/steel form work, back filling of the manhole sides with the excavated soil, disposing of the surplus earth after back filling with initial lead of 30 mts. including lift, benching and channelling shall be finished smooth in PCC 1 : 2 : 4 including dewatering if required. Providing and fixing of Precast RCC cover of DM SFRC manhole frame and cover, set in PCC 1 : 2 : 4 with Thermo plastic moulded steps for chambers beyond 900 mm dept.\h etc., complete as per specifications and drawings or as instructed from EIC.Depth of 0.9m to1.2m(900dia) complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Each 14712.95 14712.95 3.0 False None None False None False 44138.85 0 3080661 105621 None code155 Construction of Conical manhole with 230 mm thick best quality masonary blocks in CM 1 : 4, 600 mm dia at top and 1200 mm dia at bottom clear. The bed concrete shall be minimum 150 mm. The manhole shall be constructed over a bed of 150 mm thick PCC 1 : 4 : 8, walls plastered smooth, internal plastering 12 mm thk in CM 1 : 3 and external plastering 12mm thick in CM 1 : 6 including finishing smooth inside surface of the chamber with cement rendering, water proofing compound as per manufactures specification, including curing. The quoted rate to include excavation in all types of soil including soft and hard rock, necessary wooden/steel form work, back filling of the manhole sides with the excavated soil, disposing of the surplus earth after back filling with initial lead of 30 mts. including lift, benching and channelling shall be finished smooth in PCC 1 : 2 : 4 including dewatering if required. Providing and fixing of Precast RCC cover of DM SFRC manhole frame and cover, set in PCC 1 : 2 : 4 with Thermo plastic moulded steps for chambers beyond 900 mm dept.\h etc., complete as per specifications and drawings or as instructed from EIC.Depth of 1.20m to 3.0m(1200dia) complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Each 16831.64 16831.64 4.0 False None None False None False 67326.56 0 3080662 105621 None code156 Supplying, fixing and testing PVC Foam core SN 8 of approved make laid to the required level and making necessary connections inclusive of all specials like bends, tees, offsets, cleanouts, junctions, etc,.Complete. 160mm dia (IC to IC) complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Nos 2548.8 2548.8 35.0 False None None False None False 89208.0 0 3080663 105621 None code157 Supplying, fixing and testing PVC Foam core SN 8 of approved make laid to the required level and making necessary connections inclusive of all specials like bends, tees, offsets, cleanouts, junctions, etc,.Complete. 200mm dia (IC to IC) complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Nos 2150.55 2150.55 180.0 False None None False None False 387099.0 0 3080664 105621 None code158 Supply, installation, testing and commissioning of RCC NP2 Class hume pipes conforming to IS : 458, with collar joint in CM 1 : 3 packing the collar joints with hemp rope dipped in cement slurry, finishing the surface smooth with neat cement slurry, including, curing & laid to correct levels and required slope below ground in trenches up to required depth & backfilling with available good quality earth in layer not exceeding 20 cm in depth, watering, levelling consolidation etc., complete. 300 mm complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Rmtr 5097.6 5097.6 40.0 False None None False None False 203904.0 0 3080665 105621 None code159 EXTERNAL STORM WATER: Supply, installation, testing and commissioning of RCC NP2 Class hume pipes conforming to IS : 458, with collar joint in CM 1 : 3 packing the collar joints with hemp rope dipped in cement slurry, finishing the surface smooth with neat cement slurry, including, curing & laid to correct levels and required slope below ground in trenches up to required depth & backfilling with available good quality earth in layer not exceeding 20 cm in depth, watering, levelling consolidation etc., complete. 250 mm dia complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Rmtr 3823.2 3823.2 40.0 False None None False None False 152928.0 0 3080666 105621 None code160 Supply, installation, testing and commissioning of RCC NP2 Class hume pipes conforming to IS : 458, with collar joint in CM 1 : 3 packing the collar joints with hemp rope dipped in cement slurry, finishing the surface smooth with neat cement slurry, including, curing & laid to correct levels and required slope below ground in trenches up to required depth & backfilling with available good quality earth in layer not exceeding 20 cm in depth, watering, levelling consolidation etc., complete. 300 mm dia complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Rmtr 5097.6 5097.6 50.0 False None None False None False 254880.0 0 3080667 105621 None code161 Supplying, installing, testing and commissioning of PVC Foam core SN 8 of approved make laid to the required level and making necessary connections inclusive of all specials like bends, tees, offsets, cleanouts, junctions, etc,.Complete. 200 mm dia complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Nos 4956.0 4956.0 185.0 False None None False None False 916860.0 0 3080668 105621 None code162 Supplying, installing, testing and commissioning of uPVC PERFORATED pipes and fitting conforming (6 kg/sqcm) conforming to IS 4985-2000, including cutting, cleaning and with solvent joints. 160mm diameter complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Rmtr 4720.0 4720.0 125.0 False None None False None False 590000.0 0 3080669 105621 None code163 Construction of Sub soil well with Precast RCC Rings of clear dimensions as mentioned in the drawing with RCC top cover slab and RCC pre-cast manhole of 600mm x 600mm, valve chamber of 450mm x 450mm, inlet arrangements including excavation, curing with all leads and lifts,disposing the surplus earth with a lead of 300m. Sub soil well to be planned with PVC rungs of adequate spacing for going down and space for keeping pumps not less than 600 x 600 mm and complete or as instructed by EICcomplete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 3540.0 3540.0 9.0 False None None False None False 31860.0 0 3080670 105621 None code164 Construction of catch basin of following size using 230 mm thick best quality masonary blocks in CM 1 : 4 laid over a bed of 150 mm thick PCC 1 : 4 : 8, walls plastered smooth, internal plastering 12mm thk in CM 1 : 3 and external plastering 12mm thick in CM 1 : 6 including finishing smooth inside surface of the chamber with cement rendering, curing etc. that can withstand upto 40 ton capacity. The quoted rate to include excavation in all types of soil, necessary wooden/steel form work, back filling of the chamber sides with the excavated soil, disposing of the surplus earth after back filling with initial lead of 30 metres or as directed, including lift. Providing and fixing of Precast RCC cover / RCC grating and cover, set in PCC 1 : 2 : 4. The top surface of the catch basin grating shall be flushed to the flooring level and making suitable outlet arrangement to lateral drain with necessary arrangements etc., complete as per specifications and drawings or as instructed from EIC 450 mm x 450 mm clear & Depth up to 600 mm - Precast cover of Light duty. 20 Ton complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 5310.0 5310.0 4.0 False None None False None False 21240.0 0 3080671 105621 None code165 Construction of catch basin of following size using 230 mm thick best quality masonary blocks in CM 1 : 4 laid over a bed of 150 mm thick PCC 1 : 4 : 8, walls plastered smooth, internal plastering 12mm thk in CM 1 : 3 and external plastering 12mm thick in CM 1 : 6 including finishing smooth inside surface of the chamber with cement rendering, curing etc. that can withstand upto 40 ton capacity. The quoted rate to include excavation in all types of soil, necessary wooden/steel form work, back filling of the chamber sides with the excavated soil, disposing of the surplus earth after back filling with initial lead of 30 metres or as directed, including lift. Providing and fixing of Precast RCC cover / RCC grating and cover, set in PCC 1 : 2 : 4. The top surface of the catch basin grating shall be flushed to the flooring level and making suitable outlet arrangement to lateral drain with necessary arrangements etc., complete as per specifications and drawings or as instructed from EIC 600 mm x 600 mm clear & Depth up to 1000 mm - Precast cover of Medium duty. - 40 Ton complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 14704.98 14704.98 11.0 False None None False None False 161754.78 0 3080672 105621 None code166 Construction of catch basin of following size using 230 mm thick best quality masonary blocks in CM 1 : 4 laid over a bed of 150 mm thick PCC 1 : 4 : 8, walls plastered smooth, internal plastering 12mm thk in CM 1 : 3 and external plastering 12mm thick in CM 1 : 6 including finishing smooth inside surface of the chamber with cement rendering, curing etc. that can withstand upto 40 ton capacity. The quoted rate to include excavation in all types of soil, necessary wooden/steel form work, back filling of the chamber sides with the excavated soil, disposing of the surplus earth after back filling with initial lead of 30 metres or as directed, including lift. Providing and fixing of Precast RCC cover / RCC grating and cover, set in PCC 1 : 2 : 4. The top surface of the catch basin grating shall be flushed to the flooring level and making suitable outlet arrangement to lateral drain with necessary arrangements etc., complete as per specifications and drawings or as instructed from EIC 900 mm x 900 mm clear & Depth up to 1200 mm - Precast cover of Medium duty. - 40 Ton complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 16801.37 16801.37 11.0 False None None False None False 184815.07 0 3080673 105621 None code167 Construction of Reharge pit of 1.2m dia and 3.0m deep, brick wall with precast RCC rings covering the top with RCC slab including supply and fixing RCC MH cover and filter media . The quoted rate shall include earth work excavation, back filling, removing excess earth and making good the floor. 250mm bore with depth 20 m Filter Media Cost Dome type grating fixing on top etc.... Inserting 160 mm dia of 6kg/cm2 PVC perforated pipe and 12mm,20mm,40mm jelly and geofabric covering up to full length Approved make PVC pipe SWR grade A confirming to IS13592 The quoted rate shall include necessary ends,ballvalves,clamps,etc.,complete complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 55755.0 55755.0 10.0 False None None False None False 557550.0 0 3080674 105621 None code168 Approved make Rainy Filter F L- 500 Works on Cohesive Force & Centrifugal force. Operating Pressure is less than 2 feet of head. The outer Housing is made of High Density Polyehtylene. Efficiency of filter will be above 90 %. Source of power will be Gravity.for centrifugal force type with necessary accessories Working Principle : Cohesive Force & Centrifugal force Operating Pressure: Less than 2 feet of head (0.060kg/cm2) Capacity: 480 LPM Filter Element: SS-304 Screen Mesh Size: 250 Microns Inlet: 110 MM Clean Water Outlet: 90 MM Drain Outlet: 110 MM Housing: High Density Polyethylene Efficiency of Filter: Above 90% Source of Power: Gravity , complete complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 8260.0 8260.0 12.0 False None None False None False 99120.0 0 3080675 105621 None code169 EXTERNAL WATER SUPPLY SYSTEM:(BASEMENT CEILING LVL. & GROUND FLOOR ): Supplying, installing, fixing, jointing, testing and commissioning of approved make sch 80 UPVC pipes and fittings, ASTM CTS, ASTM IPS. The fittings and specials such as tees, elbows, couplers, bends, enlargers etc., with CPVC brass threaded combination / transition specials such as male adapters brass threaded female adapters, brass FPT Tee, Brass FPT elbow etc., where connection with metal is to be made including necessary drilling holes, chasing walls and making the same good in geru mixed cement martor 1:1 restore the same original condition neately as directed by the Engineer incharge. The quoted rate shall includeG.I. brackets with pvc coated GI clamps, nuts & bolts, anchor fasteners, grip bolts, GI threaded, rods, etc. pressure testing (Once at the time of fixing the concealed pipes and once pre tiling). Joints to be made with CPVC solvent cement up to 50mm dia as per ASTM D2846 and above 50mm dia primer P70, and solvent confirming to ASTM F4931 / 724. complete 25 mm dia complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Rmtr 356.83 356.83 60.0 False None None False None False 21409.8 0 3080676 105621 None code170 Supplying, installing, fixing, jointing, testing and commissioning of approved make sch 80 UPVC pipes and fittings, ASTM CTS, ASTM IPS. The fittings and specials such as tees, elbows, couplers, bends, enlargers etc., with CPVC brass threaded combination / transition specials such as male adapters brass threaded female adapters, brass FPT Tee, Brass FPT elbow etc., where connection with metal is to be made including necessary drilling holes, chasing walls and making the same good in geru mixed cement martor 1:1 restore the same original condition neately as directed by the Engineer incharge. The quoted rate shall includeG.I. brackets with pvc coated GI clamps, nuts & bolts, anchor fasteners, grip bolts, GI threaded, rods, etc. pressure testing (Once at the time of fixing the concealed pipes and once pre tiling). Joints to be made with CPVC solvent cement up to 50mm dia as per ASTM D2846 and above 50mm dia primer P70, and solvent confirming to ASTM F4931 / 724. complete 32 mm dia complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Rmtr 433.3 433.3 15.0 False None None False None False 6499.5 0 3080677 105621 None code171 Supplying, installing, fixing, jointing, testing and commissioning of approved make sch 80 UPVC pipes and fittings, ASTM CTS, ASTM IPS. The fittings and specials such as tees, elbows, couplers, bends, enlargers etc., with CPVC brass threaded combination / transition specials such as male adapters brass threaded female adapters, brass FPT Tee, Brass FPT elbow etc., where connection with metal is to be made including necessary drilling holes, chasing walls and making the same good in geru mixed cement martor 1:1 restore the same original condition neately as directed by the Engineer incharge. The quoted rate shall includeG.I. brackets with pvc coated GI clamps, nuts & bolts, anchor fasteners, grip bolts, GI threaded, rods, etc. pressure testing (Once at the time of fixing the concealed pipes and once pre tiling). Joints to be made with CPVC solvent cement up to 50mm dia as per ASTM D2846 and above 50mm dia primer P70, and solvent confirming to ASTM F4931 / 724. complete 40 mm dia complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Rmtr 484.27 484.27 25.0 False None None False None False 12106.75 0 3080678 105621 None code172 Supplying, installing, fixing, jointing, testing and commissioning of approved make sch 80 UPVC pipes and fittings, ASTM CTS, ASTM IPS. The fittings and specials such as tees, elbows, couplers, bends, enlargers etc., with CPVC brass threaded combination / transition specials such as male adapters brass threaded female adapters, brass FPT Tee, Brass FPT elbow etc., where connection with metal is to be made including necessary drilling holes, chasing walls and making the same good in geru mixed cement martor 1:1 restore the same original condition neately as directed by the Engineer incharge. The quoted rate shall includeG.I. brackets with pvc coated GI clamps, nuts & bolts, anchor fasteners, grip bolts, GI threaded, rods, etc. pressure testing (Once at the time of fixing the concealed pipes and once pre tiling). Joints to be made with CPVC solvent cement up to 50mm dia as per ASTM D2846 and above 50mm dia primer P70, and solvent confirming to ASTM F4931 / 724. complete 50 mm dia complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Rmtr 614.9 614.9 25.0 False None None False None False 15372.5 0 3080679 105621 None code173 Supplying, laying, jointing, testing &commissioning approved make class B CPVC and fittings confirming to IS 1239 PI & II, malleable fittings viz., tees, elbows, flanges, unions etc.,including cutting threading, fixing terrace floor etc., as per drawings. The quoted rate shall include necessary making bores in walls,etc., a coat of including Painting.80 mm dia (Municipal Water supply) complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Rmtr 1475.0 1475.0 25.0 False None None False None False 36875.0 0 3080680 105621 None code174 Supplying, laying, jointing, testing &commissioning approved make class B CPVC and fittings confirming to IS 1239 PI & II, malleable fittings viz., tees, elbows, flanges, unions etc.,including cutting threading, fixing terrace floor etc., as per drawings. The quoted rate shall include necessary making bores in walls,etc., a coat of including Painting.100 mm dia (Tanker Water supply) complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Rmtr 2183.0 2183.0 28.0 False None None False None False 61124.0 0 3080681 105621 None code175 Supplying, installing, testing and commissioning approved make cast brass body water meter with necessary unions for fixing on the inlet mains ; as shown on the drawing etc, complete with water meter chamber with cover and necessary ball valves, unions, etc complete 80 mm dia complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 15452.1 15452.1 2.0 False None None False None False 30904.2 0 3080682 105621 None code176 Providing and constructing Valve Chamber comprising 230MM Thick burnt brick masonry walls built in CM 1:4 over CC bed ,DI cover slab benching in CC 1:2:4 internal faces plastered smooth in CM 1:4, 15mm thick and outside Rough Plastered with CM 1:6 15mm thick including 900x900mm medium earth work excavation returning and refilling and disposing surplus soil as directed by the Engineer in charge. 600 x 600 x 600 mm depthcomplete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 10000.85 10000.85 8.0 False None None False None False 80006.8 0 3080683 105621 None code177 Providing and Fixing Copper Float valve, etc,confirming to I.S.I specifications of approved make as per directions complete.80 mm dia for BWSSB UG Sump complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 7080.0 7080.0 2.0 False None None False None False 14160.0 0 3080684 105621 None code178 BASEMENT CEILING PIPE SYSTEM- DRAINAGE: Supplying, laying, jointing, testing and commissioning approved make Agriculture pipes of 10 Kg/cm2 with solvent joints confirming to IS 5382 for exposed piping in Ceiling Lvl .The quoted rate shall include necessary fittings like Tees, 45 or 90 deg. Bends, Couplers, Offsets, etc., G.I. brackets with pvc coated GI clamps, nuts & bolts, anchor fasteners, grip bolts, GI threaded, rods, etc., complete. (External piping in Ceiling ). , as directed by Engineer-in-Charge. 110 mm dia(Waste & soil Pipe) complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Rmtr 326.57 326.57 125.0 False None None False None False 40821.25 0 3080685 105621 None code179 Supplying, laying, jointing, testing and commissioning approved make Agriculture pipes of 10 Kg/cm2 with Solvent joints confirming to IS 5382 for exposed piping in Ceiling .The quoted rate shall include necessary fittings like Tees, 45 or 90 deg. Bends, Couplers, Offsets, etc., G.I. brackets with pvc coated GI clamps, nuts & bolts, anchor fasteners, grip bolts, GI threaded, rods, etc., complete. (External piping in Ceiling Lvl.). , as directed by Engineer-in-Charge. 160 mm dia(Waste &soil Pipe)complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Rmtr 763.05 763.05 125.0 False None None False None False 95381.25 0 3080686 105621 None code180 Supplying, laying, jointing, testing and commissioning approved make Agriculture pipes of 10 Kg/cm2 with Solvent joints confirming to IS 5382 for exposed piping in Ceiling .The quoted rate shall include necessary fittings like Tees, 45 or 90 deg. Bends, Couplers, Offsets, etc., G.I. brackets with pvc coated GI clamps, nuts & bolts, anchor fasteners, grip bolts, GI threaded, rods, etc., complete. (External piping in Ceiling Lvl.). , as directed by Engineer-in-Charge. 75 mm dia(Balcony pipe + FD)complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Rmtr 165.67 165.67 46.0 False None None False None False 7620.82 0 3080687 105621 None code181 Supplying, laying, jointing, testing and commissioning approved make Agriculture pipes of 10 Kg/cm2 with Solvent joints confirming to IS 5382 for exposed piping in Ceiling .The quoted rate shall include necessary fittings like Tees, 45 or 90 deg. Bends, Couplers, Offsets, etc., G.I. brackets with pvc coated GI clamps, nuts & bolts, anchor fasteners, grip bolts, GI threaded, rods, etc., complete. (External piping in Ceiling Lvl.). , as directed by Engineer-in-Charge. 110 mm dia(Rain Water + FD) complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Rmtr 326.57 326.57 46.0 False None None False None False 15022.22 0 3080688 105621 None code182 Supplying, laying, jointing, testing and commissioning approved make Agriculture pipes of 10 Kg/cm2 with Solvent joints confirming to IS 5382 for exposed piping in Ceiling .The quoted rate shall include necessary fittings like Tees, 45 or 90 deg. Bends, Couplers, Offsets, etc., G.I. brackets with pvc coated GI clamps, nuts & bolts, anchor fasteners, grip bolts, GI threaded, rods, etc., complete. (External piping in Ceiling Lvl.). , as directed by Engineer-in-Charge. 160 mm dia(Rain Water pipe+Balcony pipe) complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Rmtr 748.71 748.71 36.0 False None None False None False 26953.56 0 3080689 105621 None code183 BASEMENT DRAIN SYSTEM: Construction of catch basin of size mentioned below upto 600mm clear internal dimension for storm water with 230mm thick walls in well burnt table moulded bricks in CM 1:4 over a bed of 100 mm thick PCC 1:4:8 (M10) internal walls plastered smooth in CM 1:3 and external walls plastered in 1:3 with sponge finish. Fixing precast Heavy Duty RCC grating of size 550 x550mm on top surface flushed to the finished floor level with necessary excavation, back filling the selected excavated earth with all leads and lifts etc., complete. 600mm x 600mm x up tp 1200mm (clear internal dimension) complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 8260.0 8260.0 3.0 False None None False None False 24780.0 0 3080690 105621 None code184 Supplying, laying, jointing, testing and commission-ing approved make SN 4 Foam core pipes confirming to IS 13592 with Solvent joints confirming to IS 5382. The quoted rate shall include necessary fittings like Tees, Bends, Offsets etc.,complete. 160 mm dia. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Nos 4956.0 4956.0 65.0 False None None False None False 322140.0 0 3080691 105621 None code185 Excavation in trenches in ordinary hard soil (other than in rock requiring chistelling and blasting) for laying subsoil pipes and refilling of trenches after pipes are laid in layers not exceeding 20 cm watering and consolidation and disposing off surplus earth as directed by the Engineer incharge, providing necessary Shoring &Strutting while excavating etc., complete Depth of excavation up to 1.00m complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Cum 1062.0 1062.0 100.0 False None None False None False 106200.0 0 3080692 105621 None code186 SEWAGE TREATMENT PLANT: Supply of equipment & Installation Sewage treatment plant Electromechanical work. Cap :80 KLD complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 5210115.36 5210115.36 1.0 False None None False None False 5210115.36 0 3080693 105621 None code187 Supply and installation of puff sheet of 80mm thick complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 2714.0 2714.0 1362.0 False None None False None False 3696468.0 0 3080694 105621 None code188 Providing and laying Cement concrete pavement with 1:2:4 for commercial & residential building floors, hardpaths, footpaths using 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size, including finishing complete as per Engineer incharge. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 8652.47 8652.47 500.0 False None None False None False 4326235.0 0 3080695 105621 None code189 Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 1038.4 1038.4 1212.0 False None None False None False 1258540.8 0 3080696 105621 None code190 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : ** Flamed finish granite stone slab Black, Cat Eye, River Pink or equivalent. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 4681.89 4681.89 237.0 False None None False None False 1109607.93 0 3080697 105621 None code191 Canopy (12mm thk laminated glass canopy - 2.8m width)complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 23600.0 23600.0 50.0 False None None False None False 1180000.0 0 3080698 105621 None code192 Granite cladding complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 4256.26 4256.26 441.0 False None None False None False 1877010.66 0 3080699 105621 None code193 Truss work (20 tons of steel @ rs.200/ kg) complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Kg 155.47 155.47 20000.0 False None None False None False 3109400.0 0 3080700 105621 None code194 Providing and fixing wooden partition, mounted on a 2 frame with 19mm ply on either sides, with sound-proof material in between, as per the design and detailed drawing. Cost to include fasteners, 10mm glass for 40% of the partition area, adhesive, locks, etc. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 8407.5 8407.5 1797.0 False None None False None False 15108277.5 0 3080701 105621 None code195 12mm glazed partition with edge polished toughened glass fixed on to Aluminium C Channel on the floor and concealed beading at the top. 50 x 25mm size, 16 gauge aluminium sections framework placed at 2 0 c/c both ways, extended to the nearest structural members (continuing up to slab level) and Covered with gypsum complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 14160.0 14160.0 134.0 False None None False None False 1897440.0 0 3080702 105621 None code196 Providing, fabricating and placing Single Leaf 32mm thick flush door , with floor spring, finished in 1mm thick Laminate of approved shade on both the surfaces of the shutter with 6mm thick grooves to pattern as indicated as per the detail drawing. The shutter shall have the 1/2 x 1 1/2 beech wood lipping alround. All the veneer and wooden surfaces shall be stained to shade as approved by the Architects and polished melamine. This also includes providing and fixing in position necessary hardware like handles, Floor Springs , heavy duty door closure, locks etc.of approved make as per ironmongery and door schedule. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 14750.0 14750.0 93.0 False None None False None False 1371750.0 0 3080703 105621 None code197 10mm thk toughened glass door supported on dorma floor springs, door handle in 4 high 1-1/2 dia heavy duty SS C shaped pipe. The door should be provided with a manual lock, top pivot and bottom pivot (Dorma make). The door to have dorma make acoustic beading on one vertical side.. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 14160.0 14160.0 64.0 False None None False None False 906240.0 0 3080704 105621 None code198 Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 g/m2, both side inclusive) consisting of main T runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross T of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main T at 600 mm center to center to form a grid of 1200x600 mm and secondary cross T of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main T runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GIadjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T- sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, madeof Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit.complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 2567.44 2567.44 347.0 False None None False None False 890901.68 0 3080705 105621 None code199 Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 g/m2, both side inclusive) consisting of main T runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross T of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main T at 600 mm center to center to form a grid of 1200x600 mm and secondary cross T of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main T runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x 1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T- sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.8 mm thick fully perforated calcium silicate board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with minimum compressive strength 225 kg/cm2, bending strength 100 kg/cm2, of size 595x595 mm, having perforation of dia. 10 mm with minimum perforated area 18 % with non woven tissue on the back side, having an NRC ( Noise Reduction Coefficient) of 0.85, with 50 mm thick rockwool of 48 kg/m3 backing. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 2843.92 2843.92 1231.0 False None None False None False 3500865.52 0 3080706 105621 None code200 Providing and fixing in position 12mm thick plaster of paris (Gypsum anhydrous) for ceiling reinforced with hessian cloth flat surface with ceiling tiles up to a height of 5 m above floor level over aluminium strips 25mm x 6mm and rendered smooth with plaster of paris including cost of materials, labour, curing complete as per specifications. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 1519.96 1519.96 3918.0 False None None False None False 5955203.28 0 3080707 105621 None code201 Providing & fixing Roller blinds of reputed make 38mm round Aluminium channel with approved fabric, telting with chain (Ball) system with all necessary fittings and fixtures as per direction of Engineer in charge complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 2336.4 2336.4 324.0 False None None False None False 756993.6 0 3080708 105621 None code202 Providing & fixing Roller blinds of reputed make 38mm round Aluminium channel with blackout fabric, telting with chain (Ball) system with all necessary fittings and fixtures as per direction of Engineer in charge complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 2336.4 2336.4 101.0 False None None False None False 235976.4 0 3080709 105621 None code203 Providing and fixing in position 6mm thick edge polished, toughened glass panels to the existing back partition/ Masonry wall / laminate finished surface in horizontal plane with necessary 2mm thick Aluminium trims as per the detailed drawings. 100% of glass surface shall be fixed with 3M vinyl film as per the detailed drawings. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 5310.0 5310.0 120.0 False None None False None False 637200.0 0 3080710 105621 None code204 Providing and fixing flawless 6mm thick mirror of approved quality with necessary bevelling as per the detail drawing. The mirror shall be fixed on 12mm thk plywood backing with stainless steel studs/ stainless steel L running clips/3M double sided tape as per detail drawings. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Sqm 4130.0 4130.0 64.0 False None None False None False 264320.0 0 3080711 105621 None code205 WOOD WORK Under Granite counter in Pantry complete with all lead and lift etc, as per specification , Suitable design and as per directed by the Engineer in Charge Sqm 17700.0 17700.0 16.0 False None None False None False 283200.0 0 3080712 105621 None code206 WOOD WORK Overhead storage in Pantry complete with all lead and lift etc, as per specification,Suitable design and as per directed by the Engineer in Charge Sqm 17700.0 17700.0 12.0 False None None False None False 212400.0 0 3080713 105621 None code207 WOOD WORK Cladding complete with all lead and lift etc, as per specification,Suitable design and as per directed by the Engineer in Charge Sqm 11800.0 11800.0 143.25 False None None False None False 1690350.0 0 3080714 105621 None code208 STORAGESLow Height complete with all lead and lift etc, as per specification,Suitable design and as per directed by the Engineer in Charge Sqm 19045.2 19045.2 336.7 False None None False None False 6412518.84 0 3080715 105621 None code209 STORAGES Full height complete with all lead and lift etc, as per specification,Suitable design and as per directed by the Engineer in Charge Sqm 19045.2 19045.2 175.0 False None None False None False 3332910.0 0 3080716 105621 None code210 WORKSTATIONS BP ergo, Wipro, Monarch, Ergotek, Merryfair or equivalent makes complete with all lead and lift etc, as per specification,Suitable design and as per directed by the Engineer in Charge No 21240.0 21240.0 100.0 False None None False None False 2124000.0 0 3080717 105621 None code211 Providing & fixing of Tea table 900mm x 750mm 450mm with 12mm thick ethched tempered glass with bevelled drawing made out of BWP ply and out faces laminated with 4mm thick veneer or 1mm thick laminate. Centre Table complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 9735.0 9735.0 11.0 False None None False None False 107085.0 0 3080718 105621 None code212 Providing & fixing of Tea table 900mm x 750mm 450mm with 12mm thick ethched tempered glass with bevelled drawing made out of BWP ply and out faces laminated with 4mm thick veneer or 1mm thick laminate. Top Cadre Cabin tables complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 17700.0 17700.0 10.0 False None None False None False 177000.0 0 3080719 105621 None code213 Providing & fixing of Tea table 900mm x 750mm 450mm with 12mm thick ethched tempered glass with bevelled drawing made out of BWP ply and out faces laminated with 4mm thick veneer or 1mm thick laminate. Board room tables complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 29500.0 29500.0 1.0 False None None False None False 29500.0 0 3080720 105621 None code214 Providing & fixing of Tea table 900mm x 750mm 450mm with 12mm thick ethched tempered glass with bevelled drawing made out of BWP ply and out faces laminated with 4mm thick veneer or 1mm thick laminate. Meeting room tables complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 23600.0 23600.0 5.0 False None None False None False 118000.0 0 3080721 105621 None code215 Providing & fixing of Tea table 900mm x 750mm 450mm with 12mm thick ethched tempered glass with bevelled drawing made out of BWP ply and out faces laminated with 4mm thick veneer or 1mm thick laminate. Reception table complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 59000.0 59000.0 1.0 False None None False None False 59000.0 0 3080722 105621 None code216 Chairs Top Cadre Officials -wire mesh with nylon fabric. complete with all lead and lift etc, as per specification,Suitable design and as per directed by the Engineer in Charge No 23600.0 23600.0 14.0 False None None False None False 330400.0 0 3080723 105621 None code217 Chairs Visitors - Upholstery fabic complete with all lead and lift etc, as per specification,Suitable design and as per directed by the Engineer in Charge No 7080.0 7080.0 60.0 False None None False None False 424800.0 0 3080724 105621 None code218 Chairs Board room chairs wire mesh with nylon fabric complete with all lead and lift etc, as per specification,Suitable design and as per directed by the Engineer in Charge No 9440.0 9440.0 64.0 False None None False None False 604160.0 0 3080725 105621 None code219 Sofa Providing and fixing Single seater leather Sofa with cushion of size 3(L)x2.5(W) X2.75(H) ft made of upholstery leather with seats fitted with padding, springs, webbing and as per direction of engineer in charge complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 25960.0 25960.0 23.0 False None None False None False 597080.0 0 3080726 105621 None code220 Sofa Providing and fixing Two seater leather Sofa with cushion of size 5(L)x2.5(W) X2.75(H) ft made of upholstery leather with seats fitted with padding, springs, webbing and as per direction of engineer in charge complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 41300.0 41300.0 7.0 False None None False None False 289100.0 0 3080727 105621 None code221 Sofa Providing and fixing Three seater leather Sofa with cushion of size 7(L)x2.5(W) X2.75(H) ft made of upholstery leathyer with seats fitted with padding, springs, webbing and as per direction of engineer in charge complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge No 47200.0 47200.0 10.0 False None None False None False 472000.0 0 3080728 105621 None code222 Providing and fixing frosted film of approved make on glass partition and doors in pattern as per drawings as per manufactures specifications etc. complete. Rate of the film shall be inclusive of submission parent company warranty of 10 years for film installed on site. complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Nos 236000.0 236000.0 9.0 False None None False None False 2124000.0 0 3080729 105621 None code223 2 BAY OPTIMIZER PLUS-DRIVE TYPE (1200W, 400D,1980H) (a) Overall Dimensions of SD-2 Single Drive Cover Unit 2 Bay(U/C plus Fittings plus Cover) shall be 2400mm (W) x 400 mm (D)x2121.5mm(H). The Construction shall be rigid knock down made out of 0.8 thick CRCA steel conforming to IS: 513. Epoxy polyester powder coated finish thickness of 40 microns. Shelf construction shall be made from CRCA steel 0.8 mm thick IS:513.Uniformly distributed load capacity of 100 Kg. Undercarriage shall have construction in welded frame made of HR sheet 3 mm thick conforming to IS: 2062. The Movements shall be Drive Type configuration: In case of D2, movement of units is achieved mechanically through a PU Drive Wheel and Sprocket -Chain-Tensioner arrangement mounted rigidly onto body size. For D2 each movable undercarriage shall be provided with 2 rollers on the shaft for driving, 2 antifriction ball bearing for rolling.The roller assembly comprises of a die-cast step wheel, 2 deep-groove ball bearings and a MS shaft. The step wheel is made of cast steel and is fitted onto the MS shaft using a feather key. The two ball bearings are then fastened on either side of the step wheel using circlips. This entire roller assembly is then snap-fitted into a wheel housing. The wheel housing is fixed in the U channel of the understructure using machine screws. This wheel-housing is made of engineering plastic material made by injection-moulding process. The entire roller assembly is designed to withstand the maximum loads of the body. Fittings shall be centralized locking arrangement through locking stiffener mounted onto back of single last unit so that it gets locked on channels when all the units are brought together. The Recess handle lock shall be of approved make placed at suitable height.The sprocket-chain arrangement is covered by a 1 mm thick. CRCA sheet Drive Unit Cover with dimensions 1202mm x 398mm x 87mm and is fixed onto the side of the body. The PU handwheel is rigidly fixed at suitable height on side of the body & projects out of cover by another 99.0 mm When the last unit is twin movable, hinged doors as accessories are provided for the end bodies, so in this case locking stiffener is mounted onto drive unit cover. Each Drive Type units shall have Locking Knob near the drive wheel for manual locking of individual units when a person is using those units. Knob shall be rotated to unlock position when units are to be moved. End stoppers shall be provided to prevent derailment.The nuts & bolts are galvanized / blackodized / Zn Plated. Also total no. of loading levels per under structure shall be 10 for SD2.Finish -The bodies including shelves are given antirust surface treatment & are coated with epoxy polyester powder of approved color and shade with dry film thickness of min40 microns. The testing of paint is done for various physical & chemical properties as per IS: 101. Label holder at front cover of body of aluminium extrusion of length 396mm for SD. Over that a transparent plastic of corresponding length of 150-200 micron polythene is to be inserted. It consists of ‘C’ section 2 mm thick HR sheet & Square 25.4mm X 2mm thick ERW tube - both connected by screws. Hinge Doors & Locking: Hinge Doors shall be made of 0.8thick CRCA steel confirming to IS: 513 Grade D. Hinged door provided in each unit have recessed Die cast Handle cum lock with 3 way locking through a lever & shooting bolts. File Separator: File separators 2 nos. made of 2mm thick. CRCA sheet (IS:513) shall be provided (b) Same as above with Overall Dimensions of LD-2 Single last Drive Unit 2 Bay(U/C plus Fittings plus Cover) shall be 2400mm(W)x400mm(D)x2121.5mm(H).(c) Same as above with Overall Dimensions of TD-2 Twin Mobile Drive Unit 2 Bay(U/C plus Fittings plus Cover) shall be 2400mm(W)x800mm(D)x2121.5mm(H). complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Unit 4960576.09 4960576.09 1.0 False None None False None False 4960576.09 0 3080730 105621 None code224 3 BAY OPTIMIZER PLUS-DRIVE TYPE (1200W, 400D,1980H) (a) Overall Dimensions of SD 3 Single Drive Cover Unit 3 Bay(U/C plus Fittings plus Cover) shall be 3600mm(W)x400mm(D)x2121.5mm(H). The Construction shall be rigid knock down made out of 0.8 thick CRCA steel conforming to IS:513. Each body shall have a main unit plus two add on units.Finish shall be Epoxy polyester powder coated thickness of 40 microns. Shelf construction shall be made from CRCA steel 0.8 mm thick IS:513.Uniformly distributed load capacity of 100 Kg. Undercarriage shall have construction in welded frame made of HR sheet 3 mm thick conforming to IS: 2062. The Movements shall be Drive Type configuration: In case of D3 movement of units is achieved mechanically through a PU Drive Wheel and Sprocket -Chain-Tensioner arrangement mounted rigidly onto body size. For D3 each movable undercarriage shall be provided with 3 rollers on the shaft for driving ,3 antifriction ball bearing for rolling.LD under structure has 2 nos. of anti-tilt bearing assembly.The roller assembly comprises of a die-cast step wheel, 2 deep-groove ball bearings and a MS shaft. The step wheel is made of cast steel and is fitted onto the MS shaft using a feather key. The two ball bearings are then fastened on either side of the step wheel using circlips. This entire roller assembly is then snap-fitted into a wheel housing. The wheel housing is fixed in the U channel of the under structure using machine screws. This wheel-housing is made of engineering plastic material made by injection-moulding process. The entire roller assembly is designed to withstand the maximum loads of the body. Fittings shall be centralized locking arrangement through locking stiffener mounted onto back of single last unit so that it gets locked on channels when all the units are brought together. The Recess handle lock is of approved make & placed at suitable height. Fixed unit (SD) does not have the Drive Unit Cover. When the last unit is twin movable, hinged doors as accessories are provided for the end bodies, so in this case locking stiffener is mounted onto drive unit cover; and with tile fascia option, it will be mounted in the recess of vertical trim. Each Drive Type units shall have Locking Knob near the drive wheel for manual locking of individual units when a person is using those units. Knob shall be rotated to unlock position when units are to be moved. End stoppers shall be provided to prevent derailment.The nuts & bolts are galvanized / blackodized / Zn Plated. Also total no. of loading levels per under structure shall be 15 for SD3. Finish -The bodies including shelves are given antirust surface treatment & are coated with epoxy polyester powder of approved color and shade with dry film thickness of min 40 microns. The testing of paint is done for various physical & chemical properties as per IS: 101. Label holder at front cover of body of aluminium extrusion of length 396mm for SD. Over that a transparent plastic of corresponding length of 150-200 micron polythene is to be inserted. It consists of ‘C’ section 2 mm thick HR sheet & Square 25.4mm X 2mm thick ERW tube - both connected by screws. Hinge Doors & Locking: Hinge Doors shall be made of 0.8thick CRCA steel confirming to IS: 513 Grade D. Hinged door provided in each unit have recessed Die cast Handle cum lock with 3 way locking through a lever & shooting bolts. File Separator: File separators 2 nos. made of 2mm thick. CRCA sheet (IS:513) shall be provided. (b) Same as above for Overall Dimensions of LD3 Single last Drive Unit 3 Bay(U/C plus Fittings plus Cover) shall be 3600mm(W)x400mm(D)x2121.5mm(H). (c)Same as above for Overall Dimensions of TD3 Twin Drive Unit 3 bay(U/C plus Fittings plus Cover) shall be 3600mm(W)x800mm(D)x2121.5mm(H). complete with all lead and lift etc, as per specification and as per directed by the Engineer in Charge Unit 11336766.11 11336766.11 1.0 False None None False None False 11336766.11 0 3080731 105621 None code225 Overall Dimensions of SD 4 Single Drive Cover Unit 4 Bay(U/C plus Fitting plus Cover) shall be 4800mm(W)x400mm(D)x2121.5mm(H). The Construction shall be rigid knock down made out of 0.8 thick CRCA steel conforming to IS:513. Each body shall have a main unit plus three add on unit. Finish shall be Epoxy polyester powder coated thickness of 40micron. Shelf construction shall be made from CRCA steel 0.8mm thick IS:513.Uniformly distributed load capacity of 100Kg. Undercarriage shall have construction in welded frame made of HR sheet 3mm thick conforming to IS:2062. The Movements shall be Drive Type configuration: In case of D4 movement of units is achieved mechanically through a PU Drive Wheel & Sprocket ChainTensioner arrangement mounted rigidly onto body size. For D4 each movable undercarriage shall be provided with 3 roller on the shaft for driving 3 antifriction ball bearing for rolling.LD under structure has 2no of antitilt bearing assembly. The roller assembly comprises of a die cast step wheel, 2 deep groove ball bearing & a MS shaft. The step wheel is made of cast steel & is fitted onto the MS shaft using a feather key. The two ball bearing are then fastened on either side of the step wheel using circlip. This entire roller assembly is then snapfitted into wheelhousing. The wheel housing is fixed in the U channel of the under structure using machine screw. This wheelhousing is made of engineering plastic material made by injection moulding process. The entire roller assembly is designed to withstand the maximum load of the body. Fitting shall be centralized locking arrangement through locking stiffener mounted onto back of single last unit so that it get locked on channel when all the unit are brought together. The Recess handle lock is of Godrej make & placed at suitable height. Fixed unit (SD) does not have the Drive Unit Cover.The sprocketchain arrangement is covered by a 1mm thick. CRCA sheet Drive Unit Cover with dimension 1302mmx398mmx87mm & is fixed onto the side of the body. The PU handwheel is rigidly fixed at suitable height onside of the body & project out of cover by another 99mm. When the last unit is twin movable, hinged door as accessories are provided for the end bodies, so in this case locking stiffener is mounted onto drive unit cover & with tile fascia option it will be mounted in the recess of vertical trim. Each Drive Type unit shall have Locking Knob near the drive wheel for manual locking of individual unit when a person is using those unit. Knob shall be rotated to unlock position when unit are to be moved. End stopper shall be provided to prevent derailment.The nuts & bolt are galvanized / blackodized / Zn Plated. Also total no. of loading level per under structure shall be 15 for SD4. Finish The bodies including shelve are given antirust surface treatment & are coated with epoxy polyester powder of approved color & shade with dry film thickness of min 40micron. The testing of paint done for various physical & chemical properties as per IS:101. Label holder at front cover of body of aluminium extrusion of length 396mm for SD. Over that a transparent plastic of corresponding length of 150-200 micron polythene is to be inserted (b) Same as above with Overall Dimension of LD4 Single last Drive Unit 4 Bay(U/C plus Fitting plus Cover) shall be 4800mm(W)x400mm(D)x2121.5mm(H). (c) Same as above with Overall Dimension of TD4 Twin Drive Unit 4 bay(U/C plus Fittings plus Cover) shall be 4800mm(W)x800mm(D)x2121.5mm(H). It consist of C section 2mm thick HR sheet & Square 25.4mmx2mm thick ERW tube-both connected by screw. Hinge Door & Locking Hinge Door shall be made of 0.8thick CRCA steel confirming to IS:513 Grade DHinged door provided in each unit have recessed Die cast Handle cum lock with 3way locking through a lever & shooting bolt. File separators 2No made of 2mm thick. CRCA sheet (IS:513) shall be provided complete with all lead & lift etc, as per specification & as per direction of Engineer in Charge Unit 10589078.16 10589078.16 1.0 False None None False None False 10589078.16 0 3080732 105621 None code226 Electrical: Suppy portion for HT works: Supply of 11 KV - Ring Main Unit - Outdoor (IP55 with Canopy) Ring Main Unit - 11kV, Oudoor, With Incomer 2nos.LBS of rating 200A and out going 1no of 200A, rating VCB Horizontal Draw out type Breaker.refer distribution scheme for protections and relays. Includes Supply & erection of base frame unit with suitable MS angle & channels. The Rate shall be including of base frame with suitable MS angle,channels clamps & accessories with all lead and lifts complete as per specifications and directions of engineer in charge of the work. No 1026600.0 1026600.0 1.0 False None None False None False 1026600.0 0 3080733 105621 None code227 Supply, of Tri Vector Meter cubicle with LBS made of 2mm thick CRCA sheet steel, free standing, outdoor type (IP55) degree of protection. The outdoor cubicle shall be suitable for mounting Tri Vector Meter supplied by State Electricity Board. The cost shall also include the pedstals required for mounting the cubicle. specification as per Local TSSPDCL norms with all lead and lifts complete as per specifications and directions of engineer in charge of the work. No. 354000.0 354000.0 1.0 False None None False None False 354000.0 0 3080734 105621 None code228 11 kV - 1 Module HT Panel - Outdoor (IP55 with Canopy) HT Panel, 11kV, Outdoor, Comprising of 11 KV, 400A, VCB,Horizontal Draw out type Breaker. refer distribution scheme for protections and relays. Consider All Digital meters & Protection Relays. Includes Supply & erection of base frame unit with suitable MS angle & channels. The Rate shall be including of base frame with suitable MS angle,channels clamps & accessories with Cable Entryv at Bottom with all lead and lifts complete as per specifications and directions of engineer in charge of the work. No. 1121000.0 1121000.0 1.0 False None None False None False 1121000.0 0 3080735 105621 None code229 Supply, of outdoor type 11KV / 433V 3 phase 50 Hz, DYn11, 630 KVA ONAN type Oil type Transformer with OLTC and RTCC with +/- 10% in steps of 2.5% IS :1180, Level 2 terminal arrangement of HT side cable box and LT side suitable for terminating LT cables with necessary arrangements, flat channels to place the wheels and stoppers as required. with all lead and lifts complete as per specifications and directions of engineer in charge of the work. No. 3540000.0 3540000.0 1.0 False None None False None False 3540000.0 0 3080736 105621 None code230 same as above for 250KVA with all lead and lifts complete as per specifications and directions of engineer in charge of the work. No. 640381.28 640381.28 1.0 False None None False None False 640381.28 0 3080737 105621 None code231 Supply, 3 way LBS of 630 A, 350 MVA with all lead and lifts complete as per specifications and directions of engineer in charge of the work. No. 648469.0 648469.0 1.0 False None None False None False 648469.0 0 3080738 105621 None code232 HT CABLE 11000V grade, earthed XLPE cable. The Quantities(mtrs) given in the BOQ are near to accuracy and the contractor has to take actual measurements at site for the exact quantities of materials required before purchase of materials required for the work. 1. Inner sheath : Shall be FRLS 2. Armour : Single galvanized steel round armour. The cable outer sheath shall be extruded ST-2 type FRLS The vendor to share the factory testing proceedure prior to the witness from the consultants Supply & laying of the under mentioned 11kV HT underground FR, XLPE cable laid in ground by necessary excavation, sand brick protection and back filling of trench and made good as necessary for laying open with necessary cleats, clamps, pipe sleeves screws etc. The excavation work shall be included in the installation part (The length indicated is for inside site requirement only. Exact length of the HT cable outside the site permises shall be accertained only after finilising the tapping point of power supply by EB). Rate shall include excavation to a depth of 1000mm, brick / tile covering, sand cushioning, back filling of soil etc.,complete. Rate shall also include cable route marker laid at every 30 mts. 3C-240 sq.mm XLPE Cable. with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 4720.0 4720.0 300.0 False None None False None False 1416000.0 0 3080739 105621 None code233 End termination of cables using Raychem Heat shrinkable kits 3C-240 Sq.mm (Outdoor) with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 53100.0 53100.0 8.0 False None None False None False 424800.0 0 3080740 105621 None code234 EARTHING Supply & Providing 2.5 mtrs long 50 mm dia. G.I. Pipe electrode earth station for Body Earthing including construction of brick masonary, providing meshed funnel, CI cover and other civil Engineering works, spreading a homogenous mixture of salt, charcoal around the pipe and all required acessories completely as per IS 3043, 1987 or latest revision..(450mm x 450mm x 300mm chamber. (Earth strip to be left upto the Earthpit for Connection) with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 12980.0 12980.0 10.0 False None None False None False 129800.0 0 3080741 105621 None code235 Supply and Providing Copper Earth Station, with 600x600x3.15mm Copper plate at 2500mm depth including construction of brick pedestal, providing meshed funnel, CI cover and other civil Engineering works, spreading a homogenous mixture of salt, charcoal around the pipe and all required acessories completely as per IS 3043, 1987 or latest revision. with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 16520.0 16520.0 6.0 False None None False None False 99120.0 0 3080742 105621 None code236 EARTH STRIPS GI / Cu earth strips on cable tray or below ground as per site condition. All Cu. Strips shall run in pvc heat shirnkable sleeve & mounted on insulation mounts. Cost of civil works shall be included for strips laid below ground. All main GI earth strips j 40 x 6 mm GI Earth flat with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 259.6 259.6 180.0 False None None False None False 46728.0 0 3080743 105621 None code237 25 x 6 mm GI Earth flat with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 212.4 212.4 120.0 False None None False None False 25488.0 0 3080744 105621 None code238 25 x 6 mm CU Earth flat with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 3540.0 3540.0 180.0 False None None False None False 637200.0 0 3080745 105621 None code239 MISCELLANEOUS ITEMS Supply and erection of Dismantable 12 SWG GI chain link fence 2.5M high with necessary MS angle, 2 nos. gate, 65mm metal spread and necessary civil works as required.-Based on Architect recommendation. with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 2360.0 2360.0 60.0 False None None False None False 141600.0 0 3080746 105621 None code240 Supplying, of 6KGF/Cmr2, Class 3, 50mm dia PVC pipes confirming to IS 4985 - 2000 inclusive of all necessary bends, tees, offsets, junctions, cowls, etc., laid under floor with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 531.0 531.0 32.0 False None None False None False 16992.0 0 3080747 105621 None code241 RCC HUME PIPES Providing and of 2m length RCC hume pipe for HT cable laying at the road crossing or wherever necessary as per site condition. Cost to include RCC collar and necessary civil works as required. Vendor shall consider the following works under the scope of work for laying hume pipes. a. Hume pipes b. collars c. levelling of hume pipes d.cementing and joining hume pipes with collars, bends etc., d.Excavation and backfilling necessary for installat Supplying, installing, testing and commissionig of R.C.C NP2 class Hume pipe laid to the required level and grade with collars joining in CM 1:3 and filling the excavated trench with approved quality saturateds and on sides, bottom and top surface of pipe 300 mm Dia RCC Hume pipe with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Rmtr 885.0 885.0 100.0 False None None False None False 88500.0 0 3080748 105621 None code242 INSPECTION CHAMBERS Construction of brick masonary inspectioin chamber wit 75 class designation bricks in cement mortar1:4, RCC top slab with 1:2:4 mix, foundation concrete 1:4:8 mix, inside plastering 12mm thick with cement mortar and finished with floating coat of neat cement 0.6mtr x 0.6mtr x 0.9r Cable Inspection Chamber with pre cast Cover with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 9440.0 9440.0 5.0 False None None False None False 47200.0 0 3080749 105621 None code243 0.45mtr x 0.45mtr x 0.9r Cable Inspection Chamber with pre cast Cover with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 7670.0 7670.0 10.0 False None None False None False 76700.0 0 3080750 105621 None code244 Supply of HT cable route markers / joints indicating slabs as per MSB requirement with necessary excavation and concreating as required to complete the installation. with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 2950.0 2950.0 10.0 False None None False None False 29500.0 0 3080751 105621 None code245 11kV Reflector Danger Board with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 885.0 885.0 2.0 False None None False None False 1770.0 0 3080752 105621 None code246 Gate for Transformer and RMU yard, with frame. with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 7670.0 7670.0 2.0 False None None False None False 15340.0 0 3080753 105621 None code247 40mm gelly for 150mm depth in outdoor RMU yard. with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Sqm 531.0 531.0 70.0 False None None False None False 37170.0 0 3080754 105621 None code248 LABOUR PORTION FOR HT WORKS: installation of 11 KV - Ring Main Unit - Outdoor (IP55 with Canopy) Ring Main Unit - 11kV, Oudoor, With Incomer 2nos.LBS of rating 200A and out going 1no of 200A, rating VCB Horizontal Draw out type Breaker.refer distribution scheme for protections and relays. Includes Supply & erection of base frame unit with suitable MS angle & channels. The Rate shall be including of base frame with suitable MS angle,channels clamps & accessories with all lead and lifts complete as per specifications and directions of engineer in charge of the work. No 35400.0 35400.0 1.0 False None None False None False 35400.0 0 3080755 105621 None code249 Installation, Testing & Commissioning of Tri Vector Meter cubicle with LBS made of 2mm thick CRCA sheet steel, free standing, outdoor type (IP55) degree of protection. The outdoor cubicle shall be suitable for mounting Tri Vector Meter supplied by State Electricity Board. The cost shall also include the pedstals required for mounting the cubicle. specification as per Local TSSPDCL norms with all lead and lifts complete as per specifications and directions of engineer in charge of the work. No. 35400.0 35400.0 1.0 False None None False None False 35400.0 0 3080756 105621 None code250 11 kV - 1 Module HT Panel - Outdoor (IP55 with Canopy) HT Panel, 11kV, Outdoor, Comprising of 11 KV, 400A, VCB,Horizontal Draw out type Breaker. refer distribution scheme for protections and relays. Consider All Digital meters & Protection Relays. Includes Supply & erection of base frame unit with suitable MS angle & channels. The Rate shall be including of base frame with suitable MS angle,channels clamps & accessories with Cable Entryv at Bottom with all lead and lifts complete as per specifications and directions of engineer in charge of the work. No. 59000.0 59000.0 1.0 False None None False None False 59000.0 0 3080757 105621 None code251 erection ,Unloading, Leading, Positioning, Erecting, Earthing, Testing and Commissioning of outdoor type 11KV / 433V 3 phase 50 Hz, DYn11, 630 KVA ONAN type Oil type Transformer with OLTC and RTCC with +/- 10% in steps of 2.5% IS :1180, Level 2 terminal arrangement of HT side cable box and LT side suitable for terminating LT cables with necessary arrangements, flat channels to place the wheels and stoppers as required. with all lead and lifts complete as per specifications and directions of engineer in charge of the work. No. 59000.0 59000.0 1.0 False None None False None False 59000.0 0 3080758 105621 None code252 same as above for 250KVA with all lead and lifts complete as per specifications and directions of engineer in charge of the work. No. 24639.58 24639.58 1.0 False None None False None False 24639.58 0 3080759 105621 None code253 Supply, erection, testing and commisioning 3 way LBS of 630 A, 350 MVA with all lead and lifts complete as per specifications and directions of engineer in charge of the work. No. 16905.86 16905.86 1.0 False None None False None False 16905.86 0 3080760 105621 None code254 HT CABLE 11000V grade, earthed XLPE cable. The Quantities(mtrs) given in the BOQ are near to accuracy and the contractor has to take actual measurements at site for the exact quantities of materials required before purchase of materials required for the work. 1. Inner sheath : Shall be FRLS 2. Armour : Single galvanized steel round armour. The cable outer sheath shall be extruded ST-2 type FRLS The vendor to share the factory testing proceedure prior to the witness from the consultants Supply & laying of the under mentioned 11kV HT underground FR, XLPE cable laid in ground by necessary excavation, sand brick protection and back filling of trench and made good as necessary for laying open with necessary cleats, clamps, pipe sleeves screws etc. The excavation work shall be included in the installation part (The length indicated is for inside site requirement only. Exact length of the HT cable outside the site permises shall be accertained only after finilising the tapping point of power supply by EB). Rate shall include excavation to a depth of 1000mm, brick / tile covering, sand cushioning, back filling of soil etc.,complete. Rate shall also include cable route marker laid at every 30 mts. 3C-240 sq.mm XLPE Cable. with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 826.0 826.0 300.0 False None None False None False 247800.0 0 3080761 105621 None code255 End termination of cables using Raychem Heat shrinkable kits 3C-240 Sq.mm (Outdoor) with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 8260.0 8260.0 8.0 False None None False None False 66080.0 0 3080762 105621 None code256 EARTHING Providing 2.5 mtrs long 50 mm dia. G.I. Pipe electrode earth station for Body Earthing including construction of brick masonary, providing meshed funnel, CI cover and other civil Engineering works, spreading a homogenous mixture of salt, charcoal around the pipe and all required acessories completely as per IS 3043, 1987 or latest revision..(450mm x 450mm x 300mm chamber. (Earth strip to be left upto the Earthpit for Connection) with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 5900.0 5900.0 10.0 False None None False None False 59000.0 0 3080763 105621 None code257 Providing Copper Earth Station, with 600x600x3.15mm Copper plate at 2500mm depth including construction of brick pedestal, providing meshed funnel, CI cover and other civil Engineering works, spreading a homogenous mixture of salt, charcoal around the pipe and all required acessories completely as per IS 3043, 1987 or latest revision. with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 5900.0 5900.0 6.0 False None None False None False 35400.0 0 3080764 105621 None code258 EARTH STRIPS GI / Cu earth strips on cable tray or below ground as per site condition. All Cu. Strips shall run in pvc heat shirnkable sleeve & mounted on insulation mounts. Cost of civil works shall be included for strips laid below ground. All main GI earth strips j 40 x 6 mm GI Earth flat with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 94.4 94.4 180.0 False None None False None False 16992.0 0 3080765 105621 None code259 25 x 6 mm GI Earth flat with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 59.0 59.0 120.0 False None None False None False 7080.0 0 3080766 105621 None code260 25 x 6 mm CU Earth flat with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 118.0 118.0 180.0 False None None False None False 21240.0 0 3080767 105621 None code261 MISCELLANEOUS ITEMS erection of Dismantable 12 SWG GI chain link fence 2.5M high with necessary MS angle, 2 nos. gate, 65mm metal spread and necessary civil works as required.-Based on Architect recommendation. with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 590.0 590.0 60.0 False None None False None False 35400.0 0 3080768 105621 None code262 fixing and testing of 6KGF/Cmr2, Class 3, 50mm dia PVC pipes confirming to IS 4985 - 2000 inclusive of all necessary bends, tees, offsets, junctions, cowls, etc., laid under floor with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 177.0 177.0 32.0 False None None False None False 5664.0 0 3080769 105621 None code263 RCC HUME PIPES laying of 2m length RCC hume pipe for HT cable laying at the road crossing or wherever necessary as per site condition. Cost to include RCC collar and necessary civil works as required. Vendor shall consider the following works under the scope of work for laying hume pipes. a. Hume pipes b. collars c. levelling of hume pipes d.cementing and joining hume pipes with collars, bends etc., d.Excavation and backfilling necessary for installat Supplying, installing, testing and commissionig of R.C.C NP2 class Hume pipe laid to the required level and grade with collars joining in CM 1:3 and filling the excavated trench with approved quality saturateds and on sides, bottom and top surface of pipe 300 mm Dia RCC Hume pipe with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Rmtr 236.0 236.0 100.0 False None None False None False 23600.0 0 3080770 105621 None code264 INSPECTION CHAMBERS Construction of brick masonary inspectioin chamber wit 75 class designation bricks in cement mortar1:4, RCC top slab with 1:2:4 mix, foundation concrete 1:4:8 mix, inside plastering 12mm thick with cement mortar and finished with floating coat of neat cement 0.6mtr x 0.6mtr x 0.9r Cable Inspection Chamber with pre cast Cover with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 2950.0 2950.0 5.0 False None None False None False 14750.0 0 3080771 105621 None code265 0.45mtr x 0.45mtr x 0.9r Cable Inspection Chamber with pre cast Cover with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 2360.0 2360.0 10.0 False None None False None False 23600.0 0 3080772 105621 None code266 installation of HT cable route markers / joints indicating slabs as per MSB requirement with necessary excavation and concreating as required to complete the installation. with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 590.0 590.0 10.0 False None None False None False 5900.0 0 3080773 105621 None code267 11kV Reflector Danger Board with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 177.0 177.0 2.0 False None None False None False 354.0 0 3080774 105621 None code268 Gate for Transformer and RMU yard, with frame. with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 1180.0 1180.0 2.0 False None None False None False 2360.0 0 3080775 105621 None code269 40mm gelly for 150mm depth in outdoor RMU yard. with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Sqm 118.0 118.0 70.0 False None None False None False 8260.0 0 3080776 105621 None code270 STATUTARY APPROVALS Preparation & submission of applications, Liasioning with EB for getting Load sanction, Availing EB supply & all necessary co-ordination upto completion of the project. (All statutory fees to be paid in this regard will be reimbursed by the client on submission of receipt & should not be included in this item) with all lead and lifts complete as per specifications and directions of engineer in charge of the work. LS 177000.0 177000.0 1.0 False None None False None False 177000.0 0 3080777 105621 None code271 Preparation of CEIG drawings, Liasioning with CEIG for getting drawing approval, arranging inspection, getting safety certificate & preparation& submission of AS BUILT drawings. Four Sets of paper print of as built drawings& a soft copy of these drawings to be submitted to the clients while completion. (All statutory fees to be paid in this regard will be reimbursed by the client on submission of receipt & should not be included in this item). with all lead and lifts complete as per specifications and directions of engineer in charge of the work. LS 118000.0 118000.0 1.0 False None None False None False 118000.0 0 3080778 105621 None code272 Deposits to BESCOM for taking power supply with all lead and lifts complete as per specifications and directions of engineer in charge of the work. LS 2950000.0 2950000.0 1.0 False None None False None False 2950000.0 0 3080779 105621 None code273 SUPPLY PORTION FOR EXTERNAL LT WORKS: LT kiosk (As per Main Single Line Diagram) with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 472000.0 472000.0 1.0 False None None False None False 472000.0 0 3080780 105621 None code274 Main LT Panel (As per Main Single Line Diagram) with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 979400.0 979400.0 1.0 False None None False None False 979400.0 0 3080781 105621 None code275 ACCP Panel (As per Main Single Line Diagram) with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 389400.0 389400.0 1.0 False None None False None False 389400.0 0 3080782 105621 None code276 Utility Panel (As per Main Single Line Diagram) with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 389400.0 389400.0 1.0 False None None False None False 389400.0 0 3080783 105621 None code277 PHE Panel with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 2224300.0 2224300.0 1.0 False None None False None False 2224300.0 0 3080784 105621 None code278 CA Panel with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 590000.0 590000.0 1.0 False None None False None False 590000.0 0 3080785 105621 None code279 CA Panel with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Main Lift Panel Nos. 590000.0 590000.0 1.0 False None None False None False 590000.0 0 3080786 105621 None code280 EMG MLDB (As per Main Single Line Diagram) with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 76700.0 76700.0 1.0 False None None False None False 76700.0 0 3080787 105621 None code281 10kVA 3phase In & 3Phase out Inverter with 90min battery backup with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 926300.0 926300.0 1.0 False None None False None False 926300.0 0 3080788 105621 None code282 10kVA 3phase In & 3Phase out UPS with 90min battery backup with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 926300.0 926300.0 7.0 False None None False None False 6484100.0 0 3080789 105621 None code283 Lift panel (As per Main Single Line Diagram) with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 1177640.0 1177640.0 3.0 False None None False None False 3532920.0 0 3080790 105621 None code284 Floor panel (As per Main Single Line Diagram) with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 233640.0 233640.0 7.0 False None None False None False 1635480.0 0 3080791 105621 None code285 40A DP ISOLATOR with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 2360.0 2360.0 2.0 False None None False None False 4720.0 0 3080792 105621 None code286 40A 4P ISOLATOR with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 4720.0 4720.0 14.0 False None None False None False 66080.0 0 3080793 105621 None code287 CABLES and End terminations XLPE Insulated & Steel Armoured Aluminium Conductor Cables Supply, Laying, Testing and Commissioning of stranded XLPE/PVC insulated, Armoured/Unarmoured/Flexible, Aluminum / Copper conductor, laid in tray / hume pipe / in ready made trenches, with nylon cable ties / MS Clamps @ 600mm interval etc., as required. The cost of the nylon tie and overlapping GI strip shall be included in the cost of installation. Supply, Installation, Testing and Commissioning of Compression type cable gland, aluminum sockets for aluminum cables / copper sockets for copper cables, insulation tape, anti corrosive paste, brass clamps for gland earthing with 14 SWG copper wire to connect to nearest earth flat. Insulation: XLPE above 25Sqmm and Class A PVC below 25Sqmm Inner sheath: Extruded PVC only for Multicore Outer sheath: Extruded Type ST2 PVC with FLAME RETARDANT Voltage grade:1100Volts Armoure: Galvanized Steel strip/Wire for multicore Non Magnetic Aluminum Wire/Strip for Single core Gland type : Brass with nickel plated Compression : Double compression above 35 Sq.mm Sealing Ring : Natural rubber for indoor, Neoprene for Outdoor 3.5 Core X 300 Sqmm with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Mtr 1888.0 1888.0 300.0 False None None False None False 566400.0 0 3080794 105621 None code288 End terminations with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 3304.0 3304.0 8.0 False None None False None False 26432.0 0 3080795 105621 None code289 3.5 Core X 240 Sqmm with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Mtr 1534.0 1534.0 300.0 False None None False None False 460200.0 0 3080796 105621 None code290 End terminations with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 2832.0 2832.0 8.0 False None None False None False 22656.0 0 3080797 105621 None code291 3.5 Core X 185 Sqmm with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Mtr 1185.9 1185.9 350.0 False None None False None False 415065.0 0 3080798 105621 None code292 End terminations with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 2183.0 2183.0 10.0 False None None False None False 21830.0 0 3080799 105621 None code293 3.5 Core X 150 Sqmm with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Mtr 885.0 885.0 75.0 False None None False None False 66375.0 0 3080800 105621 None code294 End terminations with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 1180.0 1180.0 4.0 False None None False None False 4720.0 0 3080801 105621 None code295 3.5 Core X 35 Sqmm with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Mtr 472.0 472.0 700.0 False None None False None False 330400.0 0 3080802 105621 None code296 End terminations with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 708.0 708.0 18.0 False None None False None False 12744.0 0 3080803 105621 None code297 4 Core X 16 Sqmm with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Mtr 177.0 177.0 1300.0 False None None False None False 230100.0 0 3080804 105621 None code298 End terminations with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 236.0 236.0 52.0 False None None False None False 12272.0 0 3080805 105621 None code299 4 Core X 6 Sqmm including terminations (For externallights) with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Mtr 413.0 413.0 800.0 False None None False None False 330400.0 0 3080806 105621 None code300 3 Core X 6 Sqmm including terminations (For externallights) with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Mtr 354.0 354.0 250.0 False None None False None False 88500.0 0 3080807 105621 None code301 PVC Insulated & Steel Armoured Copper Conductor cables (YFY Type) 3Core X 10 Sqmm with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Mtr 283.2 283.2 400.0 False None None False None False 113280.0 0 3080808 105621 None code302 End terminations with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 295.0 295.0 18.0 False None None False None False 5310.0 0 3080809 105621 None code303 1Core X 10 Sqmm with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Mtr 135.7 135.7 1400.0 False None None False None False 189980.0 0 3080810 105621 None code304 End terminations with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 112.1 112.1 64.0 False None None False None False 7174.4 0 3080811 105621 None code305 4Core X 16 Sqmm with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Mtr 283.2 283.2 125.0 False None None False None False 35400.0 0 3080812 105621 None code306 End terminations with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 295.0 295.0 14.0 False None None False None False 4130.0 0 3080813 105621 None code307 EXTERNAL LIGHTING DB Three phase MCB DB with multi channel programmable timers, contactors, auto/manual selector switchs, phase indicating lamps, day light sensors etc complete. with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Incomer : 1No. 63A, 4P, RCBO 30mA & 1 Nos 32A TP MCB with contactor, 32A DP MCB with contactorv and 32A 4P MCB with contactor Outgoing : 18Nos. 16A SP with separate neutral MCB of C curve with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 59000.0 59000.0 1.0 False None None False None False 59000.0 0 3080814 105621 None code308 Lighting & Raw Power Distribution boards Flexi tier DB Incomer : 1No. 63A, 4P, MCB C curve & Sub incomer 3Nos 40A DP 30mA RCCB Outgoing : 18 Nos. 10A SP MCB of C curve Emergency lighting with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 21240.0 21240.0 2.0 False None None False None False 42480.0 0 3080815 105621 None code309 12 WAY SPN DB Incomer : 1Nos 32A DP 30mA RCCB Outgoing : 5 Nos. 10A SP MCB of D curve 5 Nos. 16A SP MCB of D curve with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 11210.0 11210.0 1.0 False None None False None False 11210.0 0 3080816 105621 None code310 Lighting Circuit Supply of 2RX2.5Sq.mm + 1Rx1.5 Sqmm PVC insulated FRLS Multi strand copper conductor wire drawn in 20mm dia PVC conduit as lighting circuit. The circuit main shall be measured in running meters from respective distribution board upto first switch and then to consecutive switch looping through junction boxes then to consecutive switch as per design (further onwards, it shall be deemed to be included in point wiring). with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Rmtr 159.3 159.3 1000.0 False None None False None False 159300.0 0 3080817 105621 None code311 Power ciruit Supply of 2RX4Sq.mm + 1Rx2.5 Sqmm PVC insulated FRLS Multi strand copper conductor wire drawn in 25mm dia PVC conduit as submain circuit. The circuit main shall be measured in running meters from respective DB to the socket & its looping with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Rmtr 212.4 212.4 500.0 False None None False None False 106200.0 0 3080818 105621 None code312 Emergency lighting, ELV circuit: Supply of wiring using 3RX1.5 sqmm PVC insulated FRLS wire drawn in 20mm dia 2mm thick PVC conduit being recond from the distribution board to emergency light points as per DB details with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 100.3 100.3 500.0 False None None False None False 50150.0 0 3080819 105621 None code313 Elevator Shaft Lighting. comprising of : - a. Type philips NXC 101 Bulk head light fixture with 100 W GLS lamp - 5Nos b. 6A 3 Pin switched socket outlet - 5 sets c. Wiring for 5 light points controlled by a 10 A switch. d. Wiring for pit light using 2 Nos 6 A 2 way switches. e. Wiring for 5 sets of 5 A switched & socket outlets. wire for lighting circuit : 3 runs of 2.5 sq.mm wire for power circuit : 3 runs of 4.0 sq.mm Conduit: 25 mm dia M.S. Conduit. with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 1770.0 1770.0 2.0 False None None False None False 3540.0 0 3080820 105621 None code314 PRIMARY LIGHT POINT I. Primary light point means wiring from first switch control to the first light outlet. The switch and all necessary accessories would be part of primary point. II. Not to include the incoming lighting circuit from MCB-DB to switch. III. Ceiling flexible conduit shall be included at the drop of light fixture. IV. 3 core PVC transparent clear electrical cable flex wire/cable shall be included at the drop of suspended light fixture in open ceiling area as required. with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 1298.0 1298.0 10.0 False None None False None False 12980.0 0 3080821 105621 None code315 SECONDARY LIGHT POINT I. Secondary light point means extention of light outlet from existing primary point. Same to be controlled by the existing switch of primary point. ( If the single light has mutiple connects / drivers then the secondray point to be considered as one only as the length will be less than .2mtrs). II. Ceiling flexible conduit shall be included at the drop of light fixture. III. 3 core PVC transparent clear electrical cable flex wire/cable shall be included at the drop of suspended light fixture in open ceiling area as required. with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 944.0 944.0 30.0 False None None False None False 28320.0 0 3080822 105621 None code316 SECONDARY LIGHT POINT I. Secondary light point means extention of light outlet from existing primary point with ceiling rose & complete accessories. Same to be controlled by the existing MCB in DB II. Ceiling flexible conduit shall be included at the drop of light fixture. 3 core PVC transparent clear electrical cable flex wire/cable shall be included at the drop of suspended light fixture as required Nos. 1298.0 1298.0 30.0 False None None False None False 38940.0 0 3080823 105621 None code317 Single light point controlled by 6A two way switches. with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 1416.0 1416.0 18.0 False None None False None False 25488.0 0 3080824 105621 None code318 Industrial type sockets shall be of Polycarbonate body with plug top & locking facility. All switch / sockets shall be provided with printed labels / stickers indicating source code. Colour code for UPS socket plates : White/ as per architect. Colour code for RP socket plates : Black/Grey/ as per architect. All switch / sockets including front plate & frame which will be mounted on the metal boxes shall have removable film coat to protect from scraches & paint during installation. Note: Safety shutters to prevent accidental contact with live parts shall be provided. 1 no. 5 pin 6A switched socket outlet (Independent) with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 354.0 354.0 10.0 False None None False None False 3540.0 0 3080825 105621 None code319 1 no. 5 pin 6A switched socket outlet (Dependent). with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 295.0 295.0 10.0 False None None False None False 2950.0 0 3080826 105621 None code320 6 / 16A 5 pin switched socket outlet. with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 413.0 413.0 10.0 False None None False None False 4130.0 0 3080827 105621 None code321 Industrial Sockets (to be IP 55/66) 16A 3pin 1phase Industrial socket with plug top controlled by 16A DP MCB enclosed in sheet metal box with necessary accessories complete as required with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 2106.3 2106.3 25.0 False None None False None False 52657.5 0 3080828 105621 None code322 Supply and Fixing of flush mounting GI switch boxes concealed in wall with proper allignment and used for light, fan, sockets, switch, fan regulator, foot lamp of all fixing materials as required. Rate shall include chasing of walls with cutting machines of required depth & width and finishing with cement motar as required to the satisfactory of Project Manager. 2M with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 47.2 47.2 18.0 False None None False None False 849.6 0 3080829 105621 None code323 3M with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 59.0 59.0 30.0 False None None False None False 1770.0 0 3080830 105621 None code324 TELEPHONE & TV RELATED WORKS Multi - pair Krone tag block housed in MS enclosure duly powder coated. The enclosure shall have adequate space for operation and maintenance of telephone wires. 300 pair with all lead and lifts complete as per specifications and directions of engineer in charge of the work. No. 10030.0 10030.0 1.0 False None None False None False 10030.0 0 3080831 105621 None code325 100 pair with all lead and lifts complete as per specifications and directions of engineer in charge of the work. No. 4130.0 4130.0 7.0 False None None False None False 28910.0 0 3080832 105621 None code326 Supply and fixing of ONT (Optical Network terminal) box with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 472.0 472.0 7.0 False None None False None False 3304.0 0 3080833 105621 None code327 CAT6 cable in 20mm dia PVC conduit for Telephone & Data with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Mtr 88.5 88.5 6250.0 False None None False None False 553125.0 0 3080834 105621 None code328 Supply of 75 Ohms(RG11) co-axial cable for TV network in 20 mm dia PVC conduit inside home with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Mtr 70.8 70.8 500.0 False None None False None False 35400.0 0 3080835 105621 None code329 Supply of modular type TV socket outlet. With mounting box. with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 354.0 354.0 20.0 False None None False None False 7080.0 0 3080836 105621 None code330 Supply of RJ-45 modem jack outlet with shutter for computer with mounting box. with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 354.0 354.0 20.0 False None None False None False 7080.0 0 3080837 105621 None code331 Supply, of 12W LED Bulk head Light Fixture with glass & lamp and all other fixing accessories as required. with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 1180.0 1180.0 35.0 False None None False None False 41300.0 0 3080838 105621 None code332 Supply of external light fixturesSmart Bright street light 45W suitable for uniform street lighting It has Robust aluminum die-casting housing, IP66 & IK08 protection & PC cover with integrated optics for good uniformity. 45W with efficacy greater than115 lm/W, CCT 5700K, CRI greater than70 THDless than10%, PFgreater than0.95, 4KV inbuilt surge protection Lifetime 50,000hours @L70B50 Serviceability Class B; Protection Class I; IP 66 Dim : 420mmX141mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 7080.0 7080.0 10.0 False None None False None False 70800.0 0 3080839 105621 None code333 Supply of 6mtr long MS octognal pole with all required accessories to be installed on driveway side with cable entry chambers . Includes excavation works to install with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 4720.0 4720.0 10.0 False None None False None False 47200.0 0 3080840 105621 None code334 Supply of 1.5 mtr single cross arm to install the light with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 1770.0 1770.0 10.0 False None None False None False 17700.0 0 3080841 105621 None code335 Supply of Light fixting near entry & exit gates with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 17700.0 17700.0 2.0 False None None False None False 35400.0 0 3080842 105621 None code336 40W 1200mm length Suspended batten light with electronic driver-6000K,4000 lumen with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 2596.0 2596.0 40.0 False None None False None False 103840.0 0 3080843 105621 None code337 18W recess mounted downlight (Staircase) with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 2124.0 2124.0 45.0 False None None False None False 95580.0 0 3080844 105621 None code338 11W Bulkhead Light for Ramp & Terrace with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 590.0 590.0 30.0 False None None False None False 17700.0 0 3080845 105621 None code339 18W recess mounted downlight (Staircase) with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 2124.0 2124.0 45.0 False None None False None False 95580.0 0 3080846 105621 None code340 EARTHING Supply & Providing 2.5 mtrs long 50 mm dia. G.I. Pipe electrode earth station for Body Earthing including construction of brick masonary, providing meshed funnel, CI cover and other civil Engineering works, spreading a homogenous mixture of salt, charcoal around the pipe and all required acessories completely as per IS 3043, 1987 or latest revision..(450mm x 450mm x 300mm chamber. (Earth strip to be left upto the Earthpit for Connection) (For transformer, DG , Pump panel) with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 10030.0 10030.0 20.0 False None None False None False 200600.0 0 3080847 105621 None code341 Supply and Providing Copper Earth Station, with 600x600x3.15mm Copper plate at 2500mm depth including construction of brick pedestal, providing meshed funnel, CI cover and other civil Engineering works, spreading a homogenous mixture of salt, charcoal around the pipe and all required acessories completely as per IS 3043, 1987 or latest revision. (For transformer & DG) with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 16520.0 16520.0 4.0 False None None False None False 66080.0 0 3080848 105621 None code342 EARTH STRIPS GI / Cu earth strips on cable tray or below ground as per site condition. All Cu. Strips shall run in pvc heat shirnkable sleeve & mounted on insulation mounts. Cost of civil works shall be included for strips laid below ground. All main GI earth strips j 40 x 6 mm GI Earth flat with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 236.0 236.0 50.0 False None None False None False 11800.0 0 3080849 105621 None code343 25 x 6 mm GI Earth flat with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 153.4 153.4 630.0 False None None False None False 96642.0 0 3080850 105621 None code344 25 x 3 mm GI Earth flat with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 153.4 153.4 200.0 False None None False None False 30680.0 0 3080851 105621 None code345 25 x 6 mm CU Earth flat with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 1888.0 1888.0 50.0 False None None False None False 94400.0 0 3080852 105621 None code346 FIELD TEST Post commisioning test to carry out and extract the result of installed earthing system for each of the earth station till the earthing terminal. The rate shall also includes necessary 3rd party report submission with a validity for 15 years. with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 2950.0 2950.0 1.0 False None None False None False 2950.0 0 3080853 105621 None code347 RCC HUME PIPES Providing and laying of 2m length RCC hume pipe for HT cable laying at the road crossing or wherever necessary as per site condition. Cost to include RCC collar and necessary civil works as required. Vendor shall consider the following works under the scope of work for laying hume pipes. a. Hume pipes b. collars c. levelling of hume pipes d.cementing and joining hume pipes with collars, bends etc., d.Excavation and backfilling necessary for installat Supplying, installing, testing and commissionig of R.C.C NP2 class Hume pipe laid to the required level and grade with collars joining in CM 1:3 and filling the excavated trench with approved quality saturateds and on sides, bottom and top surface of pipe 200mm Dia RCC Hume pipe with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Rmtr 649.0 649.0 100.0 False None None False None False 64900.0 0 3080854 105621 None code348 150mm Dia RCC Hume pipe with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Rmtr 472.0 472.0 100.0 False None None False None False 47200.0 0 3080855 105621 None code349 INSPECTION CHAMBERS Construction of brick masonary inspectioin chamber wit 75 class designation bricks in cement mortar1:4, RCC top slab with 1:2:4 mix, foundation concrete 1:4:8 mix, inside plastering 12mm thick with cement mortar and finished with floating coat of neat cement 1.4mtr x 1.4mtr x1.2 mtr Cable Inspection Chamber with pre cast Cover with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 14160.0 14160.0 1.0 False None None False None False 14160.0 0 3080856 105621 None code350 6mtr x 0.6mtr x 0.9mtr Cable Inspection Chamber with pre cast Cover with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 9440.0 9440.0 10.0 False None None False None False 94400.0 0 3080857 105621 None code351 Fire bucket with stand suitable for 2 buckets of round shape bottom, painted red marked FIRE and duly filled with river sand. with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 4720.0 4720.0 2.0 False None None False None False 9440.0 0 3080858 105621 None code352 433V Reflector Danger Board with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 413.0 413.0 2.0 False None None False None False 826.0 0 3080859 105621 None code353 Earthing strip of 2Run of 25x6mm GI for entire length of the tray to be considered. Cost to include the same. This GI strip to be used for tapping body earthing to panels as designed in earthing scheme. Size of Cable Tray :600 mm x 50 mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Rmtr 1180.0 1180.0 100.0 False None None False None False 118000.0 0 3080860 105621 None code354 Size of Cable Tray :300 mm x 50 mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Rmtr 944.0 944.0 50.0 False None None False None False 47200.0 0 3080861 105621 None code355 Size of Cable Tray : 100 mm x 50 mmwith all lead and lifts complete as per specifications and directions of engineer in charge of the work. Rmtr 708.0 708.0 150.0 False None None False None False 106200.0 0 3080862 105621 None code356 Perforated type cable tray Supply & installation of Pre fabricated Hot -dip galvanised Perforated cable tray system made of 2mm thick sheet steel folded with two longitudinal side rails connected by rungs at regular intervals of following sizes with necessary Tees, Vertical/ Horizontal Bends, expanision anchor fasteners, coupler plates, coupling fasteners etc., (Tray shall be measured along the central axis of the cable tray). Size of Cable Tray :600 mm x 50 mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Rmtr 1416.0 1416.0 100.0 False None None False None False 141600.0 0 3080863 105621 None code357 Size of Cable Tray :450 mm x 50 mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Rmtr 1121.0 1121.0 50.0 False None None False None False 56050.0 0 3080864 105621 None code358 Supply of MS channels / angles, flat sections for cable trays, tray supports, Panel / DB mounting frames, insert plates, Busduct supports etc., as directed at site. All fabricated items shall be painted with 2coats of black enamel paint over a coat of approved paint. with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Tonne 88500.0 88500.0 0.5 False None None False None False 44250.0 0 3080865 105621 None code359 Rubber mat 1100V grade ISI approved - 1 m x 0.5m with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 2360.0 2360.0 10.0 False None None False None False 23600.0 0 3080866 105621 None code360 Shock treatment chart as approved by the Electrical Inspectorate mounted on teak wood frame and suitable for wall mounting in 3 languages (Telugu, English & Hindi) with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 1416.0 1416.0 1.0 False None None False None False 1416.0 0 3080867 105621 None code361 First aid kit with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 1239.0 1239.0 1.0 False None None False None False 1239.0 0 3080868 105621 None code362 Danger boards with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 354.0 354.0 2.0 False None None False None False 708.0 0 3080869 105621 None code363 Supply & fixing of rubber gloves, gloves stand with wall mounting of Approved Make & as per supply voltage with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 1062.0 1062.0 1.0 False None None False None False 1062.0 0 3080870 105621 None code364 Laminated Schematic with glass frame with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 4130.0 4130.0 1.0 False None None False None False 4130.0 0 3080871 105621 None code365 MS Fabricated Items with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Kgs 236.0 236.0 50.0 False None None False None False 11800.0 0 3080872 105621 None code366 LABOUR CHARGES FOR EXTERNAL LT WORKS SUPPLY PORTION FOR EXTERNAL LT WORKS: LT kiosk (As per Main Single Line Diagram) with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 17700.0 17700.0 1.0 False None None False None False 17700.0 0 3080873 105621 None code367 Main LT Panel (As per Main Single Line Diagram) with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 59000.0 59000.0 1.0 False None None False None False 59000.0 0 3080874 105621 None code368 ACCP Panel (As per Main Single Line Diagram) with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 17700.0 17700.0 1.0 False None None False None False 17700.0 0 3080875 105621 None code369 Utility Panel (As per Main Single Line Diagram) with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 17700.0 17700.0 1.0 False None None False None False 17700.0 0 3080876 105621 None code370 PHE Panel with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 17700.0 17700.0 1.0 False None None False None False 17700.0 0 3080877 105621 None code371 CA Panel with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 11800.0 11800.0 1.0 False None None False None False 11800.0 0 3080878 105621 None code372 CA Panel with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Main Lift Panel Nos. 11800.0 11800.0 1.0 False None None False None False 11800.0 0 3080879 105621 None code373 EMG MLDB (As per Main Single Line Diagram) with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 5900.0 5900.0 1.0 False None None False None False 5900.0 0 3080880 105621 None code374 10kVA 3phase In & 3Phase out Inverter with 90min battery backup with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 17700.0 17700.0 1.0 False None None False None False 17700.0 0 3080881 105621 None code375 10kVA 3phase In & 3Phase out UPS with 90min battery backup with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 17700.0 17700.0 7.0 False None None False None False 123900.0 0 3080882 105621 None code376 Lift panel (As per Main Single Line Diagram) with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 2360.0 2360.0 3.0 False None None False None False 7080.0 0 3080883 105621 None code377 Floor panel (As per Main Single Line Diagram) with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 2360.0 2360.0 7.0 False None None False None False 16520.0 0 3080884 105621 None code378 40A DP ISOLATOR with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 413.0 413.0 2.0 False None None False None False 826.0 0 3080885 105621 None code379 40A 4P ISOLATOR with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 1180.0 1180.0 14.0 False None None False None False 16520.0 0 3080886 105621 None code380 CABLES and End terminations XLPE Insulated & Steel Armoured Aluminium Conductor Cables Supply, Laying, Testing and Commissioning of stranded XLPE/PVC insulated, Armoured/Unarmoured/Flexible, Aluminum / Copper conductor, laid in tray / hume pipe / in ready made trenches, with nylon cable ties / MS Clamps @ 600mm interval etc., as required. The cost of the nylon tie and overlapping GI strip shall be included in the cost of installation. Supply, Installation, Testing and Commissioning of Compression type cable gland, aluminum sockets for aluminum cables / copper sockets for copper cables, insulation tape, anti corrosive paste, brass clamps for gland earthing with 14 SWG copper wire to connect to nearest earth flat. Insulation: XLPE above 25Sqmm and Class A PVC below 25Sqmm Inner sheath: Extruded PVC only for Multicore Outer sheath: Extruded Type ST2 PVC with FLAME RETARDANT Voltage grade:1100Volts Armoure: Galvanized Steel strip/Wire for multicore Non Magnetic Aluminum Wire/Strip for Single core Gland type : Brass with nickel plated Compression : Double compression above 35 Sq.mm Sealing Ring : Natural rubber for indoor, Neoprene for Outdoor 3.5 Core X 300 Sqmm with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Mtr 236.0 236.0 300.0 False None None False None False 70800.0 0 3080887 105621 None code381 End terminations with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 944.0 944.0 8.0 False None None False None False 7552.0 0 3080888 105621 None code382 3.5 Core X 240 Sqmm with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Mtr 295.0 295.0 300.0 False None None False None False 88500.0 0 3080889 105621 None code383 End terminations with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 826.0 826.0 8.0 False None None False None False 6608.0 0 3080890 105621 None code384 3.5 Core X 185 Sqmm with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Mtr 236.0 236.0 350.0 False None None False None False 82600.0 0 3080891 105621 None code385 End terminations with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 767.0 767.0 10.0 False None None False None False 7670.0 0 3080892 105621 None code386 3.5 Core X 150 Sqmm with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Mtr 129.8 129.8 75.0 False None None False None False 9735.0 0 3080893 105621 None code387 End terminations with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 531.0 531.0 4.0 False None None False None False 2124.0 0 3080894 105621 None code388 3.5 Core X 50 Sqmm with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Mtr 70.8 70.8 75.0 False None None False None False 5310.0 0 3080895 105621 None code389 End terminations with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 236.0 236.0 4.0 False None None False None False 944.0 0 3080896 105621 None code390 3.5 Core X 35 Sqmm with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Mtr 70.8 70.8 700.0 False None None False None False 49560.0 0 3080897 105621 None code391 End terminations with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 236.0 236.0 18.0 False None None False None False 4248.0 0 3080898 105621 None code392 4 Core X 16 Sqmm with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Mtr 47.2 47.2 1300.0 False None None False None False 61360.0 0 3080899 105621 None code393 End terminations with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 100.3 100.3 52.0 False None None False None False 5215.6 0 3080900 105621 None code394 4 Core X 6 Sqmm including terminations (For externallights) with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Mtr 147.5 147.5 800.0 False None None False None False 118000.0 0 3080901 105621 None code395 3 Core X 6 Sqmm including terminations (For externallights) with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Mtr 118.0 118.0 250.0 False None None False None False 29500.0 0 3080902 105621 None code396 PVC Insulated & Steel Armoured Copper Conductor cables (YFY Type) 3Core X 10 Sqmm with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Mtr 11.8 11.8 400.0 False None None False None False 4720.0 0 3080903 105621 None code397 End terminations with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 141.6 141.6 18.0 False None None False None False 2548.8 0 3080904 105621 None code398 1Core X 10 Sqmm with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Mtr 29.5 29.5 1400.0 False None None False None False 41300.0 0 3080905 105621 None code399 End terminations with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 41.3 41.3 64.0 False None None False None False 2643.2 0 3080906 105621 None code400 4Core X 16 Sqmm with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Mtr 11.8 11.8 125.0 False None None False None False 1475.0 0 3080907 105621 None code401 End terminations with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 141.6 141.6 14.0 False None None False None False 1982.4 0 3080908 105621 None code402 EXTERNAL LIGHTING DB Three phase MCB DB with multi channel programmable timers, contactors, auto/manual selector switchs, phase indicating lamps, day light sensors etc complete. with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Incomer : 1No. 63A, 4P, RCBO 30mA & 1 Nos 32A TP MCB with contactor, 32A DP MCB with contactorv and 32A 4P MCB with contactor Outgoing : 18Nos. 16A SP with separate neutral MCB of C curve with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 5900.0 5900.0 1.0 False None None False None False 5900.0 0 3080909 105621 None code403 Lighting & Raw Power Distribution boards Flexi tier DB Incomer : 1No. 63A, 4P, MCB C curve & Sub incomer 3Nos 40A DP 30mA RCCB Outgoing : 18 Nos. 10A SP MCB of C curve Emergency lighting with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 2360.0 2360.0 2.0 False None None False None False 4720.0 0 3080910 105621 None code404 12 WAY SPN DB Incomer : 1Nos 32A DP 30mA RCCB Outgoing : 5 Nos. 10A SP MCB of D curve 5 Nos. 16A SP MCB of D curve with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 1416.0 1416.0 1.0 False None None False None False 1416.0 0 3080911 105621 None code405 Lighting Circuit Supply & Installation of 2RX2.5Sq.mm + 1Rx1.5 Sqmm PVC insulated FRLS Multi strand copper conductor wire drawn in 20mm dia PVC conduit as lighting circuit. The circuit main shall be measured in running meters from respective distribution board upto first switch and then to consecutive switch looping through junction boxes then to consecutive switch as per design (further onwards, it shall be deemed to be included in point wiring). with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Rmtr 29.5 29.5 1000.0 False None None False None False 29500.0 0 3080912 105621 None code406 Power ciruit Installation of 2RX4Sq.mm + 1Rx2.5 Sqmm PVC insulated FRLS Multi strand copper conductor wire drawn in 25mm dia PVC conduit as submain circuit. The circuit main shall be measured in running meters from respective DB to the socket & its looping with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Rmtr 47.2 47.2 500.0 False None None False None False 23600.0 0 3080913 105621 None code407 Emergency lighting, ELV circuit: Installation of wiring using 3RX1.5 sqmm PVC insulated FRLS wire drawn in 20mm dia 2mm thick PVC conduit being recond from the distribution board to emergency light points as per DB details with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 23.6 23.6 500.0 False None None False None False 11800.0 0 3080914 105621 None code408 Elevator Shaft Lighting. comprising of : - a. Type philips NXC 101 Bulk head light fixture with 100 W GLS lamp - 5Nos b. 6A 3 Pin switched socket outlet - 5 sets c. Wiring for 5 light points controlled by a 10 A switch. d. Wiring for pit light using 2 Nos 6 A 2 way switches. e. Wiring for 5 sets of 5 A switched & socket outlets. wire for lighting circuit : 3 runs of 2.5 sq.mm wire for power circuit : 3 runs of 4.0 sq.mm Conduit: 25 mm dia M.S. Conduit. with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 295.0 295.0 2.0 False None None False None False 590.0 0 3080915 105621 None code409 PRIMARY LIGHT POINT I. Primary light point means wiring from first switch control to the first light outlet. The switch and all necessary accessories would be part of primary point. II. Not to include the incoming lighting circuit from MCB-DB to switch. III. Ceiling flexible conduit shall be included at the drop of light fixture. IV. 3 core PVC transparent clear electrical cable flex wire/cable shall be included at the drop of suspended light fixture in open ceiling area as required. with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 295.0 295.0 10.0 False None None False None False 2950.0 0 3080916 105621 None code410 SECONDARY LIGHT POINT I. Secondary light point means extention of light outlet from existing primary point. Same to be controlled by the existing switch of primary point. ( If the single light has mutiple connects / drivers then the secondray point to be considered as one only as the length will be less than .2mtrs). II. Ceiling flexible conduit shall be included at the drop of light fixture. III. 3 core PVC transparent clear electrical cable flex wire/cable shall be included at the drop of suspended light fixture in open ceiling area as required. with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 295.0 295.0 30.0 False None None False None False 8850.0 0 3080917 105621 None code411 SECONDARY LIGHT POINT I. Secondary light point means extention of light outlet from existing primary point with ceiling rose & complete accessories. Same to be controlled by the existing MCB in DB II. Ceiling flexible conduit shall be included at the drop of light fixture. 3 core PVC transparent clear electrical cable flex wire/cable shall be included at the drop of suspended light fixture as required Nos. 177.0 177.0 30.0 False None None False None False 5310.0 0 3080918 105621 None code412 Single light point controlled by 6A two way switches. with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 295.0 295.0 18.0 False None None False None False 5310.0 0 3080919 105621 None code413 Industrial type sockets shall be of Polycarbonate body with plug top & locking facility. All switch / sockets shall be provided with printed labels / stickers indicating source code. Colour code for UPS socket plates : White/ as per architect. Colour code for RP socket plates : Black/Grey/ as per architect. All switch / sockets including front plate & frame which will be mounted on the metal boxes shall have removable film coat to protect from scraches & paint during installation. Note: Safety shutters to prevent accidental contact with live parts shall be provided. 1 no. 5 pin 6A switched socket outlet (Independent) with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 118.0 118.0 10.0 False None None False None False 1180.0 0 3080920 105621 None code414 1 no. 5 pin 6A switched socket outlet (Dependent). with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 118.0 118.0 10.0 False None None False None False 1180.0 0 3080921 105621 None code415 6 / 16A 5 pin switched socket outlet. with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 118.0 118.0 10.0 False None None False None False 1180.0 0 3080922 105621 None code416 Industrial Sockets (to be IP 55/66) 16A 3pin 1phase Industrial socket with plug top controlled by 16A DP MCB enclosed in sheet metal box with necessary accessories complete as required with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 206.5 206.5 25.0 False None None False None False 5162.5 0 3080923 105621 None code417 Supply and Fixing of flush mounting GI switch boxes concealed in wall with proper allignment and used for light, fan, sockets, switch, fan regulator, foot lamp of all fixing materials as required. Rate shall include chasing of walls with cutting machines of required depth & width and finishing with cement motar as required to the satisfactory of Project Manager. 2M with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 11.8 11.8 18.0 False None None False None False 212.4 0 3080924 105621 None code418 3M with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 11.8 11.8 30.0 False None None False None False 354.0 0 3080925 105621 None code419 TELEPHONE & TV RELATED WORKS Multi - pair Krone tag block housed in MS enclosure duly powder coated. The enclosure shall have adequate space for operation and maintenance of telephone wires. 300 pair with all lead and lifts complete as per specifications and directions of engineer in charge of the work. No. 413.0 413.0 1.0 False None None False None False 413.0 0 3080926 105621 None code420 100 pair with all lead and lifts complete as per specifications and directions of engineer in charge of the work. No. 295.0 295.0 7.0 False None None False None False 2065.0 0 3080927 105621 None code421 Supply and fixing of ONT (Optical Network terminal) box with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 118.0 118.0 7.0 False None None False None False 826.0 0 3080928 105621 None code422 CAT6 cable in 20mm dia PVC conduit for Telephone & Data with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Mtr 29.5 29.5 6250.0 False None None False None False 184375.0 0 3080929 105621 None code423 laying of 75 Ohms(RG11) co-axial cable for TV network in 20 mm dia PVC conduit inside home with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Mtr 23.6 23.6 500.0 False None None False None False 11800.0 0 3080930 105621 None code424 fixing of modular type TV socket outlet. With mounting box. with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 88.5 88.5 20.0 False None None False None False 1770.0 0 3080931 105621 None code425 fixing of RJ-45 modem jack outlet with shutter for computer with mounting box. with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 88.5 88.5 20.0 False None None False None False 1770.0 0 3080932 105621 None code426 Erection, Testing & Commissioning of 12W LED Bulk head Light Fixture with glass & lamp and all other fixing accessories as required. with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 147.5 147.5 35.0 False None None False None False 5162.5 0 3080933 105621 None code427 installation of external light fixturesSmart Bright street light 45W suitable for uniform street lighting It has Robust aluminum die-casting housing, IP66 & IK08 protection & PC cover with integrated optics for good uniformity. 45W with efficacy greater than115 lm/W, CCT 5700K, CRI greater than70 THDless than10%, PFgreater than0.95, 4KV inbuilt surge protection Lifetime 50,000hours @L70B50 Serviceability Class B; Protection Class I; IP 66 Dim : 420mmX141mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 590.0 590.0 10.0 False None None False None False 5900.0 0 3080934 105621 None code428 installation of 6mtr long MS octognal pole with all required accessories to be installed on driveway side with cable entry chambers . Includes excavation works to install with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 1770.0 1770.0 10.0 False None None False None False 17700.0 0 3080935 105621 None code429 installation of 1.5 mtr single cross arm to install the light with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 236.0 236.0 10.0 False None None False None False 2360.0 0 3080936 105621 None code430 installation of Light fixting near entry & exit gates with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 590.0 590.0 2.0 False None None False None False 1180.0 0 3080937 105621 None code431 40W 1200mm length Suspended batten light with electronic driver-6000K,4000 lumen with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 354.0 354.0 40.0 False None None False None False 14160.0 0 3080938 105621 None code432 18W recess mounted downlight (Staircase) with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 236.0 236.0 45.0 False None None False None False 10620.0 0 3080939 105621 None code433 11W Bulkhead Light for Ramp & Terrace with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 177.0 177.0 30.0 False None None False None False 5310.0 0 3080940 105621 None code434 18W recess mounted downlight (Staircase) with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 236.0 236.0 45.0 False None None False None False 10620.0 0 3080941 105621 None code435 EARTHING Supply & Providing 2.5 mtrs long 50 mm dia. G.I. Pipe electrode earth station for Body Earthing including construction of brick masonary, providing meshed funnel, CI cover and other civil Engineering works, spreading a homogenous mixture of salt, charcoal around the pipe and all required acessories completely as per IS 3043, 1987 or latest revision..(450mm x 450mm x 300mm chamber. (Earth strip to be left upto the Earthpit for Connection) (For transformer, DG , Pump panel) with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 5900.0 5900.0 20.0 False None None False None False 118000.0 0 3080942 105621 None code436 Providing Copper Earth Station, with 600x600x3.15mm Copper plate at 2500mm depth including construction of brick pedestal, providing meshed funnel, CI cover and other civil Engineering works, spreading a homogenous mixture of salt, charcoal around the pipe and all required acessories completely as per IS 3043, 1987 or latest revision. (For transformer & DG) with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 5900.0 5900.0 4.0 False None None False None False 23600.0 0 3080943 105621 None code437 EARTH STRIPS GI / Cu earth strips on cable tray or below ground as per site condition. All Cu. Strips shall run in pvc heat shirnkable sleeve & mounted on insulation mounts. Cost of civil works shall be included for strips laid below ground. All main GI earth strips j 40 x 6 mm GI Earth flat with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 82.6 82.6 50.0 False None None False None False 4130.0 0 3080944 105621 None code438 25 x 6 mm GI Earth flat with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 59.0 59.0 630.0 False None None False None False 37170.0 0 3080945 105621 None code439 25 x 3 mm GI Earth flat with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 59.0 59.0 200.0 False None None False None False 11800.0 0 3080946 105621 None code440 25 x 6 mm CU Earth flat with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 118.0 118.0 50.0 False None None False None False 5900.0 0 3080947 105621 None code441 FIELD TEST Post commisioning test to carry out and extract the result of installed earthing system for each of the earth station till the earthing terminal. The rate shall also includes necessary 3rd party report submission with a validity for 15 years. with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 590.0 590.0 1.0 False None None False None False 590.0 0 3080948 105621 None code442 RCC HUME PIPES Providing and laying of 2m length RCC hume pipe for HT cable laying at the road crossing or wherever necessary as per site condition. Cost to include RCC collar and necessary civil works as required. Vendor shall consider the following works under the scope of work for laying hume pipes. a. Hume pipes b. collars c. levelling of hume pipes d.cementing and joining hume pipes with collars, bends etc., d.Excavation and backfilling necessary for installat Supplying, installing, testing and commissionig of R.C.C NP2 class Hume pipe laid to the required level and grade with collars joining in CM 1:3 and filling the excavated trench with approved quality saturateds and on sides, bottom and top surface of pipe 200mm Dia RCC Hume pipe with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Rmtr 177.0 177.0 100.0 False None None False None False 17700.0 0 3080949 105621 None code443 150mm Dia RCC Hume pipe with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Rmtr 177.0 177.0 100.0 False None None False None False 17700.0 0 3080950 105621 None code444 INSPECTION CHAMBERS Construction of brick masonary inspectioin chamber wit 75 class designation bricks in cement mortar1:4, RCC top slab with 1:2:4 mix, foundation concrete 1:4:8 mix, inside plastering 12mm thick with cement mortar and finished with floating coat of neat cement 1.4mtr x 1.4mtr x1.2 mtr Cable Inspection Chamber with pre cast Cover with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 3540.0 3540.0 1.0 False None None False None False 3540.0 0 3080951 105621 None code445 6mtr x 0.6mtr x 0.9mtr Cable Inspection Chamber with pre cast Cover with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 2950.0 2950.0 10.0 False None None False None False 29500.0 0 3080952 105621 None code446 Fire bucket with stand suitable for 2 buckets of round shape bottom, painted red marked FIRE and duly filled with river sand. with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 590.0 590.0 2.0 False None None False None False 1180.0 0 3080953 105621 None code447 433V Reflector Danger Board with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 118.0 118.0 2.0 False None None False None False 236.0 0 3080954 105621 None code448 Ladder type cable tray Supply & installation of Hot -dip galvanized cable rack system made of 2mm thick sheet steel folded with two longitudinal side rails connected by rungs at regular intervals of following sizes with necessary Tees, Vertical/ Horizontal Bends, expansion anchor fasteners, coupler plates, coupling fasteners, including supply & grouting of supports as required at site. The supports should be painted with black enamel paint over a coat of anti corrosive primer. (Tray shall be measured along the central axis of the cable tray, 1000mm above sizes are fabricated by MS items) Earthing strip of 2Run of 25x6mm GI for entire length of the tray to be considered. Cost to include the same. This GI strip to be used for tapping body earthing to panels as designed in earthing scheme. Size of Cable Tray :600 mm x 50 mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Rmtr 177.0 177.0 100.0 False None None False None False 17700.0 0 3080955 105621 None code449 Size of Cable Tray :300 mm x 50 mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Rmtr 177.0 177.0 50.0 False None None False None False 8850.0 0 3080956 105621 None code450 Size of Cable Tray : 100 mm x 50 mmwith all lead and lifts complete as per specifications and directions of engineer in charge of the work. Rmtr 118.0 118.0 150.0 False None None False None False 17700.0 0 3080957 105621 None code451 Perforated type cable tray Supply & installation of Pre fabricated Hot -dip galvanised Perforated cable tray system made of 2mm thick sheet steel folded with two longitudinal side rails connected by rungs at regular intervals of following sizes with necessary Tees, Vertical/ Horizontal Bends, expanision anchor fasteners, coupler plates, coupling fasteners etc., (Tray shall be measured along the central axis of the cable tray). Size of Cable Tray :600 mm x 50 mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Rmtr 177.0 177.0 100.0 False None None False None False 17700.0 0 3080958 105621 None code452 Size of Cable Tray :450 mm x 50 mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Rmtr 165.2 165.2 50.0 False None None False None False 8260.0 0 3080959 105621 None code453 fabrication& installation of MS channels / angles, flat sections for cable trays, tray supports, Panel / DB mounting frames, insert plates, Busduct supports etc., as directed at site. All fabricated items shall be painted with 2coats of black enamel paint over a coat of approved paint. with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Tonne 29500.0 29500.0 0.5 False None None False None False 14750.0 0 3080960 105621 None code454 Rubber mat 1100V grade ISI approved - 1 m x 0.5m with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 59.0 59.0 10.0 False None None False None False 590.0 0 3080961 105621 None code455 Shock treatment chart as approved by the Electrical Inspectorate mounted on teak wood frame and suitable for wall mounting in 3 languages (Telugu, English & Hindi) with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 59.0 59.0 1.0 False None None False None False 59.0 0 3080962 105621 None code456 First aid kit with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 59.0 59.0 1.0 False None None False None False 59.0 0 3080963 105621 None code457 Danger boards with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 47.2 47.2 2.0 False None None False None False 94.4 0 3080964 105621 None code458 Supply & fixing of rubber gloves, gloves stand with wall mounting of Approved Make & as per supply voltage with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 59.0 59.0 1.0 False None None False None False 59.0 0 3080965 105621 None code459 Laminated Schematic with glass frame with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 118.0 118.0 1.0 False None None False None False 118.0 0 3080966 105621 None code460 MS Fabricated Items with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Kgs 118.0 118.0 50.0 False None None False None False 5900.0 0 3080967 105621 None code461 Supply of internal lighting works:LUX LEVEL REPORT TO BE SUBMITTED 1200MM 1x40W SUSPENDED LED LIGHT FIXTURE FOR NORMAL LIGHTING APPLICATIONS-5700K WORKSTATION with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 3540.0 3540.0 150.0 False None None False None False 531000.0 0 3080968 105621 None code462 40W 2400mm SUSPENDED LINEAR LIGHT FIXTURE WITH ELECTRONIC DRIVER WITH 4000K WORKSTATION with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 10620.0 10620.0 100.0 False None None False None False 1062000.0 0 3080969 105621 None code463 30W 1800mm SUSPENDED LINEAR LIGHT FIXTURE WITH ELECTRONIC DRIVER WITH 4000K WORKSTATION with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 8260.0 8260.0 100.0 False None None False None False 826000.0 0 3080970 105621 None code464 20W 1200mm SUSPENDED LINEAR LIGHT FIXTURE WITH ELECTRONIC DRIVER WITH 4000K WORKSTATION with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 5310.0 5310.0 75.0 False None None False None False 398250.0 0 3080971 105621 None code465 31W 600x600mm RECESSED LIGHT FIXTURE WITH ELECTRONIC DRIVER WITH 4000K RECORDS ROOM, BOARD ROOM & MULTI PURPOSE HALL with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 4130.0 4130.0 560.0 False None None False None False 2312800.0 0 3080972 105621 None code466 15W LED RECESSED MOUNTED CIRCULAR DOWN LIGHT FIXTURE WITH 4000K, COOL DAY WHITE ,FOR NORMAL LIGHTING APPLICATIONS CABIN, MEETING ROOM, CORRIDORS, BOARD ROOM, ANTE ROOM, STORE with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 1416.0 1416.0 600.0 False None None False None False 849600.0 0 3080973 105621 None code467 18W LED RECESSED MOUNTED CIRCULAR DOWN LIGHT FIXTURE WITH 4000K, COOL DAY WHITE ,FOR NORMAL LIGHTING APPLICATIONS with all lead and lifts complete as per specifications and directions of engineer in charge of the work. PANTRY, RECORDS ROOM Nos 1416.0 1416.0 105.0 False None None False None False 148680.0 0 3080974 105621 None code468 15W LED SURFACE MOUNTED CIRCULAR DOWN LIGHT FIXTURE WITH 4000K, COOL DAY WHITE ,FOR NORMAL LIGHTING APPLICATIONS with all lead and lifts complete as per specifications and directions of engineer in charge of the work. STORAGE Nos 1770.0 1770.0 35.0 False None None False None False 61950.0 0 3080975 105621 None code469 20W LED TRACK LIGHTS WITH 1MTR/2MTR SUSPENDED TRACK with all lead and lifts complete as per specifications and directions of engineer in charge of the work. WORKSTATION, RECEPTION Nos 2950.0 2950.0 140.0 False None None False None False 413000.0 0 3080976 105621 None code470 50/60W 2000MM DIA SUSPENDED DECORATIVE LIGHT FIXTURE WITH ELECTRONIC DRIVER AND WITH 4000K LAMPS with all lead and lifts complete as per specifications and directions of engineer in charge of the work. RECEPTION & SECURITY DESK Nos 23600.0 23600.0 5.0 False None None False None False 118000.0 0 3080977 105621 None code471 40/50W 1500MM DIA SUSPENDED DECORATIVE LIGHT FIXTURE WITH ELECTRONIC DRIVER AND WITH 4000K LAMPS with all lead and lifts complete as per specifications and directions of engineer in charge of the work. RECEPTION & SECURITY DESK Nos 21240.0 21240.0 5.0 False None None False None False 106200.0 0 3080978 105621 None code472 30/40W 400MM/500MM DIA SUSPENDED DECORATIVE LIGHT FIXTURE WITH ELECTRONIC DRIVER AND WITH 4000K LAMPS with all lead and lifts complete as per specifications and directions of engineer in charge of the work. WORKSTATION Nos 5900.0 5900.0 25.0 False None None False None False 147500.0 0 3080979 105621 None code473 30/40W 400MM/500MM DIA SUSPENDED DECORATIVE LIGHT FIXTURE WITH ELECTRONIC DRIVER AND WITH 4000K LAMPS with all lead and lifts complete as per specifications and directions of engineer in charge of the work. PANTRY Nos 5900.0 5900.0 25.0 False None None False None False 147500.0 0 3080980 105621 None code474 30/40W 200MM DIA SUSPENDED DECORATIVE LIGHT FIXTURE WITH ELECTRONIC DRIVER AND WITH 4000K LAMPS with all lead and lifts complete as per specifications and directions of engineer in charge of the work. PANTRY Nos 4130.0 4130.0 25.0 False None None False None False 103250.0 0 3080981 105621 None code475 30/40W 600MM DIA SUSPENDED DECORATIVE LIGHT FIXTURE WITH ELECTRONIC DRIVER AND WITH 4000K LAMPS with all lead and lifts complete as per specifications and directions of engineer in charge of the work. RECEPTION Nos 9440.0 9440.0 25.0 False None None False None False 236000.0 0 3080982 105621 None code476 Linear Suspended Direct luminaire Pureline slim 50 mm width for Standalone/Continuous installation with efficacy greater than100lm/W System Power 100W CCT 5700 ; CRIgreater than80 Fixed output / DALI driver 140-270V, THDless than10%, PFgreater than0.95, 4KV internal surge protection, EMC/EMI compliant L70B50 @ 50K Hrs.@ 45 Degree Ambient Serviceability Class B Extruded aluminium housing with powder coated/anodized finish with PS diffuser IP 20 LxW 3500x920mm (to match for the table size) (combination of 2 ft - 565x50x75 mm 4ft - 1130x50x75mm 8ft -2260x50x75mm) BOARD ROOM & MEETING ROOM Nos 94400.0 94400.0 8.0 False None None False None False 755200.0 0 3080983 105621 None code477 14W/MTR LED STRIP LIGHT WITH ELECTRONIC DRIVER PER 5MTRS WITH 3000K with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Mtr 767.0 767.0 100.0 False None None False None False 76700.0 0 3080984 105621 None code478 For installationLUX LEVEL REPORT TO BE SUBMITTED 1200MM 1x40W SUSPENDED LED LIGHT FIXTURE FOR NORMAL LIGHTING APPLICATIONS-5700K WORKSTATION with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 354.0 354.0 150.0 False None None False None False 53100.0 0 3080985 105621 None code479 40W 2400mm SUSPENDED LINEAR LIGHT FIXTURE WITH ELECTRONIC DRIVER WITH 4000K WORKSTATION with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 413.0 413.0 100.0 False None None False None False 41300.0 0 3080986 105621 None code480 30W 1800mm SUSPENDED LINEAR LIGHT FIXTURE WITH ELECTRONIC DRIVER WITH 4000K WORKSTATION with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 354.0 354.0 100.0 False None None False None False 35400.0 0 3080987 105621 None code481 20W 1200mm SUSPENDED LINEAR LIGHT FIXTURE WITH ELECTRONIC DRIVER WITH 4000K WORKSTATION with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 354.0 354.0 75.0 False None None False None False 26550.0 0 3080988 105621 None code482 31W 600x600mm RECESSED LIGHT FIXTURE WITH ELECTRONIC DRIVER WITH 4000K RECORDS ROOM, BOARD ROOM & MULTI PURPOSE HALL with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 354.0 354.0 560.0 False None None False None False 198240.0 0 3080989 105621 None code483 15W LED RECESSED MOUNTED CIRCULAR DOWN LIGHT FIXTURE WITH 4000K, COOL DAY WHITE ,FOR NORMAL LIGHTING APPLICATIONS CABIN, MEETING ROOM, CORRIDORS, BOARD ROOM, ANTE ROOM, STORE with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 354.0 354.0 600.0 False None None False None False 212400.0 0 3080990 105621 None code484 18W LED RECESSED MOUNTED CIRCULAR DOWN LIGHT FIXTURE WITH 4000K, COOL DAY WHITE ,FOR NORMAL LIGHTING APPLICATIONS with all lead and lifts complete as per specifications and directions of engineer in charge of the work. PANTRY, RECORDS ROOM Nos 354.0 354.0 105.0 False None None False None False 37170.0 0 3080991 105621 None code485 15W LED SURFACE MOUNTED CIRCULAR DOWN LIGHT FIXTURE WITH 4000K, COOL DAY WHITE ,FOR NORMAL LIGHTING APPLICATIONS with all lead and lifts complete as per specifications and directions of engineer in charge of the work. STORAGE Nos 354.0 354.0 35.0 False None None False None False 12390.0 0 3080992 105621 None code486 20W LED TRACK LIGHTS WITH 1MTR/2MTR SUSPENDED TRACK with all lead and lifts complete as per specifications and directions of engineer in charge of the work. WORKSTATION, RECEPTION Nos 354.0 354.0 140.0 False None None False None False 49560.0 0 3080993 105621 None code487 50/60W 2000MM DIA SUSPENDED DECORATIVE LIGHT FIXTURE WITH ELECTRONIC DRIVER AND WITH 4000K LAMPS with all lead and lifts complete as per specifications and directions of engineer in charge of the work. RECEPTION & SECURITY DESK Nos 1180.0 1180.0 5.0 False None None False None False 5900.0 0 3080994 105621 None code488 40/50W 1500MM DIA SUSPENDED DECORATIVE LIGHT FIXTURE WITH ELECTRONIC DRIVER AND WITH 4000K LAMPS with all lead and lifts complete as per specifications and directions of engineer in charge of the work. RECEPTION & SECURITY DESK Nos 1180.0 1180.0 5.0 False None None False None False 5900.0 0 3080995 105621 None code489 30/40W 400MM/500MM DIA SUSPENDED DECORATIVE LIGHT FIXTURE WITH ELECTRONIC DRIVER AND WITH 4000K LAMPS with all lead and lifts complete as per specifications and directions of engineer in charge of the work. WORKSTATION Nos 354.0 354.0 25.0 False None None False None False 8850.0 0 3080996 105621 None code490 30/40W 400MM/500MM DIA SUSPENDED DECORATIVE LIGHT FIXTURE WITH ELECTRONIC DRIVER AND WITH 4000K LAMPS with all lead and lifts complete as per specifications and directions of engineer in charge of the work. PANTRY Nos 354.0 354.0 25.0 False None None False None False 8850.0 0 3080997 105621 None code491 30/40W 200MM DIA SUSPENDED DECORATIVE LIGHT FIXTURE WITH ELECTRONIC DRIVER AND WITH 4000K LAMPS with all lead and lifts complete as per specifications and directions of engineer in charge of the work. PANTRY Nos 354.0 354.0 25.0 False None None False None False 8850.0 0 3080998 105621 None code492 30/40W 600MM DIA SUSPENDED DECORATIVE LIGHT FIXTURE WITH ELECTRONIC DRIVER AND WITH 4000K LAMPS with all lead and lifts complete as per specifications and directions of engineer in charge of the work. RECEPTION Nos 590.0 590.0 25.0 False None None False None False 14750.0 0 3080999 105621 None code493 Linear Suspended Direct luminaire Pureline slim 50 mm width for Standalone/Continuous installation with efficacy greater than100lm/W System Power 100W CCT 5700 ; CRIgreater than80 Fixed output / DALI driver 140-270V, THDless than10%, PFgreater than0.95, 4KV internal surge protection, EMC/EMI compliant L70B50 @ 50K Hrs.@ 45 Degree Ambient Serviceability Class B Extruded aluminium housing with powder coated/anodized finish with PS diffuser IP 20 LxW 3500x920mm (to match for the table size) (combination of 2 ft - 565x50x75 mm 4ft - 1130x50x75mm 8ft -2260x50x75mm) BOARD ROOM & MEETING ROOM Nos 3540.0 3540.0 8.0 False None None False None False 28320.0 0 3081000 105621 None code494 14W/MTR LED STRIP LIGHT WITH ELECTRONIC DRIVER PER 5MTRS WITH 3000K with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Mtr 295.0 295.0 100.0 False None None False None False 29500.0 0 3081001 105621 None code495 Internal LT works-3 Supply portion: Lighting & Raw Power Distribution board Flexi tier DB Incomer : 1No. 40A, 4P, MCB C curve & Sub incomer 3Nos 40A DP 30mA RCCB Outgoing : 30 Nos. 10A SP MCB of C curve with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 25960.0 25960.0 7.0 False None None False None False 181720.0 0 3081002 105621 None code496 Emergency lighting 12 WAY SPN DB Incomer : 1Nos 32A DP 30mA RCCB Outgoing : 5 Nos. 10A SP MCB of D curve 5 Nos. 16A SP MCB of D curve with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 11210.0 11210.0 7.0 False None None False None False 78470.0 0 3081003 105621 None code497 UDBs : FABRICATED DB Incomer : 1No. 63A TP+2N, MCB 3Nos. 63A DP, MCB (D-Curve) Outgoing : 24 Nos. 20A DP 30mA, RCBO SI - SERIES with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 112100.0 112100.0 7.0 False None None False None False 784700.0 0 3081004 105621 None code498 Lighting Circuit: .Supply & Installation of wiring using 3RX2.5 sqmm PVC insulated FRLS wire drawn in 20mm dia 2mm thick PVC conduit as lighting circuit. The circuit main shall be measured in running metres from respective distribution board upto first switch point / sensor / light point and looping between the switches & sensor ( further onwards, it shall be deemed to be included in point wiring). with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 129.8 129.8 4900.0 False None None False None False 636020.0 0 3081005 105621 None code499 Emergency lighting, ELV circuit: Supply & Installation of wiring using 3RX1.5 sqmm PVC insulated FRLS wire drawn in 20mm dia 2mm thick PVC conduit being recond from the distribution board to emergency light points as per DB details with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 100.3 100.3 1050.0 False None None False None False 105315.0 0 3081006 105621 None code500 UPS / RP Circuit : Supply & Installation of 3 C x 4 Sqmm FRLS 1100V unarmoured double insulated flexible multicore cable in white and black colour for UPS & RP circuit respectively in existing conduits/raceways. m 165.2 165.2 7000.0 False None None False None False 1156400.0 0 3081007 105621 None code501 UPS / RP Circuit : Supply & Installation of 3 C x 4 Sqmm FRLS 1100V unarmoured double insulated flexible multicore cable in white and black colour for UPS & RP circuit respectively in existing conduits/raceways. m 118.0 118.0 1200.0 False None None False None False 141600.0 0 3081008 105621 None code502 UPS Circuit - Server/HUB room rack Supply & Installation of 3 C x 4 Sqmm FRLS 1100V unarmoured double insulated flexible multicore cable in white and black colour for UPS & RP circuit respectively in existing conduits/raceways. with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 165.2 165.2 350.0 False None None False None False 57820.0 0 3081009 105621 None code503 POINT WIRING POINT WIRING - SWITCH CONTROL Supply, installation, Testing and Commissioning of point wiring using 3R x 1.5 Sqmm FRLS 1100V wire of approved make drawn in 20mm dia 2mm thick rigid PVC conduit including all conduit accessories such as bends, junction boxes etc., complete. The wiring shall be complete with ceiling roses, switches and all consumables. .PRIMARY LIGHT POINT with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 1298.0 1298.0 350.0 False None None False None False 454300.0 0 3081010 105621 None code504 SECONDARY LIGHT POINT I. Secondary light point means extention of light outlet from existing primary point. Same to be controlled by the existing switch of primary point. II. Ceiling flexible conduit shall be included at the drop of light fixture. 3 core PVC transparent clear electrical cable flex wire/cable shall be included at the drop of suspended light fixture as required Each LED strip of 5 mtr looping is considered in this line item with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 944.0 944.0 1200.0 False None None False None False 1132800.0 0 3081011 105621 None code505 WITHOUT BOX 1x6A socket controlled by 16A switch - UPS power with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 295.0 295.0 250.0 False None None False None False 73750.0 0 3081012 105621 None code506 2x6/16A socket controlled by 16A switch - UPS power with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 531.0 531.0 500.0 False None None False None False 265500.0 0 3081013 105621 None code507 1x6/16A universal socket controlled by 16A switch - UPS power with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 295.0 295.0 50.0 False None None False None False 14750.0 0 3081014 105621 None code508 1x6/16A universal socket controlled by 16A switch - Raw power with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 354.0 354.0 250.0 False None None False None False 88500.0 0 3081015 105621 None code509 Hub room Rack Sockets - With Box 1No. 20A 3 pin 1phase Industrial type socket with plug top controlled by 16A DP MCB enclosed in sheet metal box with able to mount on wall / raceway with necessary accessories complete as required with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 5310.0 5310.0 25.0 False None None False None False 132750.0 0 3081016 105621 None code510 Industrial Sockets (to be IP 55/66) 20A Industrial socket controlled by 20A SP MCB (MCB below as separate control) enclosed in sheet metal box with necessary accessories complete as required for geyser with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 2360.0 2360.0 10.0 False None None False None False 23600.0 0 3081017 105621 None code511 16A 3pin 1phase Industrial socket with plug top controlled by 16A DP MCB enclosed in sheet metal box with necessary accessories complete as required with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 2106.3 2106.3 20.0 False None None False None False 42126.0 0 3081018 105621 None code512 32A 5pin 3phase Industrial socket with plug top controlled by 32A FP MCB enclosed in sheet metal box with necessary accessories complete as required with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 2785.98 2785.98 10.0 False None None False None False 27859.8 0 3081019 105621 None code513 250 x 180 x 75mm readymade floor mounted Junction box to locate 1sets of 3x16A socket controlled by 16A switch and to locate 2data ports (excluding sockets) with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 11210.0 11210.0 50.0 False None None False None False 560500.0 0 3081020 105621 None code514 SITC of GI 2module back box for data outlets as per site requirement including necessary civil works (To be as per IT team requirement & to be approved by IT team before procurement). with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 47.2 47.2 50.0 False None None False None False 2360.0 0 3081021 105621 None code515 PERFORATED TRAY Slotted angle GI ready made Perforated cable trays of 14SWG. Quoted rates for installation shall include necessary anchor fasteners / L angle supports @ 600mm interval etc., screws, bolts, nuts to suit site conditions Cost to include customised bends 200mm Wide Tray with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 1345.2 1345.2 100.0 False None None False None False 134520.0 0 3081022 105621 None code516 100mm Wide Tray with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 1003.0 1003.0 100.0 False None None False None False 100300.0 0 3081023 105621 None code517 Floor Raceway 200 x 40mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 1168.2 1168.2 50.0 False None None False None False 58410.0 0 3081024 105621 None code518 150 x 40mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 967.6 967.6 100.0 False None None False None False 96760.0 0 3081025 105621 None code519 100 x 40mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 772.9 772.9 200.0 False None None False None False 154580.0 0 3081026 105621 None code520 Ceiling raceway Cost to include customised bends 100 x 60mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 1121.0 1121.0 125.0 False None None False None False 140125.0 0 3081027 105621 None code521 Junction Boxes (Floor) 250 x 250 x 50mm Size with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 749.3 749.3 20.0 False None None False None False 14986.0 0 3081028 105621 None code522 200 x 200 x 50mm Size with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 643.1 643.1 35.0 False None None False None False 22508.5 0 3081029 105621 None code523 150 x 150 x 50mm Size with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 560.5 560.5 70.0 False None None False None False 39235.0 0 3081030 105621 None code524 Junction Boxes 200 x 200 x 100mm Size with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 1003.0 1003.0 10.0 False None None False None False 10030.0 0 3081031 105621 None code525 Supply & Laying of following size 2mm thick rigid FRLS PVC conduits. Rate shall include wall chasing & rough plastering, clamping / fixing arrangement. 25mm dia with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 59.0 59.0 500.0 False None None False None False 29500.0 0 3081032 105621 None code526 25mm dia with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 59.0 59.0 500.0 False None None False None False 29500.0 0 3081033 105621 None code527 Supply & Installation of following size Powder coated raceway / wire way with cover, made out of 16 SWG GI/MS for body and 14 SWG GI/MS for cover.The shade shall be as per site approval 100 x 100mm Size (SERVER ROOM) with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 1416.0 1416.0 100.0 False None None False None False 141600.0 0 3081034 105621 None code528 Supply & Installation of following size Powder coated junction boxes , made out of 16 SWG GI/MS for body and 14 SWG GI/MS for cover. The shade shall be as per site approval 150 x 150 x 65mm Size with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 654.9 654.9 30.0 False None None False None False 19647.0 0 3081035 105621 None code529 CABLE TRAYS & RACEWAYS FOR NETWORKING & AV : Floor Raceway includes AV 200 x 40mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 1168.2 1168.2 50.0 False None None False None False 58410.0 0 3081036 105621 None code530 150 x 40mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 967.6 967.6 100.0 False None None False None False 96760.0 0 3081037 105621 None code531 100 x 40mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 772.9 772.9 250.0 False None None False None False 193225.0 0 3081038 105621 None code532 Ceiling raceway with cover INCLUDES AV Cost to include customised bends 150 x 60mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 1180.0 1180.0 150.0 False None None False None False 177000.0 0 3081039 105621 None code533 200 x 100mm Size (BACKBONE) with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 2183.0 2183.0 150.0 False None None False None False 327450.0 0 3081040 105621 None code534 Junction Boxes (Floor) 250 x 250 x 50mm Size with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 873.2 873.2 20.0 False None None False None False 17464.0 0 3081041 105621 None code535 200 x 200 x 50mm Size with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 749.3 749.3 25.0 False None None False None False 18732.5 0 3081042 105621 None code536 200 x 200 x 50mm Size with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 643.1 643.1 90.0 False None None False None False 57879.0 0 3081043 105621 None code537 150 x 150 x 50mm Size with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 649.0 649.0 20.0 False None None False None False 12980.0 0 3081044 105621 None code538 Junction Boxes (Ceiling) 150 x 150 x 100mm Size with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 649.0 649.0 20.0 False None None False None False 12980.0 0 3081045 105621 None code539 Supply & Laying of following size 2mm thick rigid FRLS PVC conduits.Rate shall include wall chasing & rough plastering, clamping / fixing arrangement. 32mm dia with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 82.6 82.6 500.0 False None None False None False 41300.0 0 3081046 105621 None code540 32mm dia (FLOOR) with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 59.0 59.0 500.0 False None None False None False 29500.0 0 3081047 105621 None code541 Supply & Installation of following size Powder coated raceway / wire way with cover, made out of 16 SWG GI/MS for body and 14 SWG GI/MS for cover.The shade shall be as per site approval 500 x 100mm Size with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 2468.56 2468.56 50.0 False None None False None False 123428.0 0 3081048 105621 None code542 Providing and Fixing of Cableoffill wire mesh cable tray system made outof stainless stell wires [316L AS PER NF 10-088-2] and bent into final shape , All cable trays, shall be manufactured with a longitudinal ‘T-welded’ safety edge and Trays shall be constructed with a 50 mm x 100 mm mesh configuration complete with couplers,C mountings and all accessories as required. 500 x 100mm Sizewith all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 4248.0 4248.0 50.0 False None None False None False 212400.0 0 3081049 105621 None code543 EARTHING Supply, installation, testing & commissioning of Maintenance Free Earth pits, eathing system shall be installed as per supplier guidelines /details. Rate shall include necessary civil works. Model : EROD 1/2X10 with GEM-25 & ERODCMP Type - 1 : Single Rod configuration with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 23600.0 23600.0 2.0 False None None False None False 47200.0 0 3081050 105621 None code544 EARTH STRIPS GI/Cu earth strips on cable tray or below ground as per site condition. All Cu. Strips shall be run in PVC heat shrinkable sleeve & mounted on insulation mounts. Cost of civil works shall be included for strips laid below ground. 25 x 3mm GI Earth flat with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 82.6 82.6 500.0 False None None False None False 41300.0 0 3081051 105621 None code545 25 x 6mm GI Earth flat with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 159.3 159.3 300.0 False None None False None False 47790.0 0 3081052 105621 None code546 Busbar of 0.5 Mtr length made out of 25 x 3 mm GI strip with drill holes of M8 at 25mm interval mounted on insulators. The box to be wth glass door cover with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 4484.0 4484.0 7.0 False None None False None False 31388.0 0 3081053 105621 None code547 Busbar of 0.5 Mtr length made out of 25 x 3 mm Cu. strip with drill holes of M8 at 25mm interval mounted on insul ators. with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 5133.0 5133.0 7.0 False None None False None False 35931.0 0 3081054 105621 None code548 Busbar of 0.5 Mtr length made out of 25 x 6 mm Cu. strip with drill holes of M8 at 25mm interval mounted on insulators. with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 5428.0 5428.0 7.0 False None None False None False 37996.0 0 3081055 105621 None code549 PVC Insulated Copper Conductor Unarmoured Cables (YY Type) 1.1kV grade, copper conductor, PVC insulated, unarmoured, power cables. The cables shall be laid on tray / hume pipe /in ready made trenches, with nylon cable ties / MS Clamps @ 600mm interval etc., as required. Rate quoted shall exclude cost of tray / hume pipe 1 Core x 10 Sq. Mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 129.8 129.8 245.0 False None None False None False 31801.0 0 3081056 105621 None code550 Endterminations with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 147.5 147.5 14.0 False None None False None False 2065.0 0 3081057 105621 None code551 1 Core x 6Sq. mm including Terminations with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 70.8 70.8 150.0 False None None False None False 10620.0 0 3081058 105621 None code552 1 Core x 4Sq. mm including Terminations with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 47.2 47.2 150.0 False None None False None False 7080.0 0 3081059 105621 None code553 1 Core x 2.5Sq. mm including Terminations with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 35.4 35.4 150.0 False None None False None False 5310.0 0 3081060 105621 None code554 MISCELLANEOUS ITEMS RCC Hume pipe ( For road crossing ) of following size 900mm below ground level, including collars & civil works. Rubber mat 1100V grade ISI approved - 2 m x 1m with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 1799.5 1799.5 7.0 False None None False None False 12596.5 0 3081061 105621 None code555 Shock treatment chart as approved by the Electrical Inspectorate mounted on teak wood frame and suitable for wall mounting. with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 826.0 826.0 7.0 False None None False None False 5782.0 0 3081062 105621 None code556 First aid kit with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 5192.0 5192.0 7.0 False None None False None False 36344.0 0 3081063 105621 None code557 Danger boards with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 2419.0 2419.0 7.0 False None None False None False 16933.0 0 3081064 105621 None code558 Laminated SLD with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 200.6 200.6 7.0 False None None False None False 1404.2 0 3081065 105621 None code559 Following type Fire extinguisher with mounting hook / bracket and discharge horn. MS Fabricated Items (power coated) (To be used for light and other addiitonal supports) with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Kgs 129.8 129.8 100.0 False None None False None False 12980.0 0 3081066 105621 None code560 Supply & fixing of rubber gloves of Approved Make & as per supply voltage with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 525.1 525.1 7.0 False None None False None False 3675.7 0 3081067 105621 None code561 MS box /angle support of suitable size for suspending the lights below services and to route cable in same for connectivity with necessary accessories. ( Support for fixtures below AC duct) with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 885.0 885.0 70.0 False None None False None False 61950.0 0 3081068 105621 None code562 Temporary Lighting & Power arrangement with sufficient temporary Lighting ( Min 200Lux Ave. ) & power shall be provided to all agencies during execution with required no. of Industrial type FTL light fixtures & socket outlets, till commissioning stage. with all lead and lifts complete as per specifications and directions of engineer in charge of the work. LS 59000.0 59000.0 1.0 False None None False None False 59000.0 0 3081069 105621 None code563 LABOUR PORTION FOR INTERNAL LT WORK: Lighting & Raw Power Distribution board Flexi tier DB Incomer : 1No. 40A, 4P, MCB C curve & Sub incomer 3Nos 40A DP 30mA RCCB Outgoing : 30 Nos. 10A SP MCB of C curve with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 2596.0 2596.0 7.0 False None None False None False 18172.0 0 3081070 105621 None code564 Emergency lighting 12 WAY SPN DB Incomer : 1Nos 32A DP 30mA RCCB Outgoing : 5 Nos. 10A SP MCB of D curve 5 Nos. 16A SP MCB of D curve with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 1416.0 1416.0 7.0 False None None False None False 9912.0 0 3081071 105621 None code565 UDBs : FABRICATED DB Incomer : 1No. 63A TP+2N, MCB 3Nos. 63A DP, MCB (D-Curve) Outgoing : 24 Nos. 20A DP 30mA, RCBO SI - SERIES with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 9440.0 9440.0 7.0 False None None False None False 66080.0 0 3081072 105621 None code566 Lighting Circuit: installation of wiring using 3RX2.5 sqmm PVC insulated FRLS wire drawn in 20mm dia 2mm thick PVC conduit as lighting circuit. The circuit main shall be measured in running metres from respective distribution board upto first switch point / sensor / light point and looping between the switches & sensor ( further onwards, it shall be deemed to be included in point wiring). with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 29.5 29.5 4900.0 False None None False None False 144550.0 0 3081073 105621 None code567 Emergency lighting, ELV circuit: Installation of wiring using 3RX1.5 sqmm PVC insulated FRLS wire drawn in 20mm dia 2mm thick PVC conduit being recond from the distribution board to emergency light points as per DB details with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 23.6 23.6 1050.0 False None None False None False 24780.0 0 3081074 105621 None code568 UPS / RP Circuit : Supply & Installation of 3 C x 4 Sqmm FRLS 1100V unarmoured double insulated flexible multicore cable in white and black colour for UPS & RP circuit respectively in existing conduits/raceways. m 29.5 29.5 7000.0 False None None False None False 206500.0 0 3081075 105621 None code569 UPS / RP Circuit : Installation of 3 C x 4 Sqmm FRLS 1100V unarmoured double insulated flexible multicore cable in white and black colour for UPS & RP circuit respectively in existing conduits/raceways. m 23.6 23.6 1200.0 False None None False None False 28320.0 0 3081076 105621 None code570 UPS Circuit - Server/HUB room rack Installation of 3 C x 4 Sqmm FRLS 1100V unarmoured double insulated flexible multicore cable in white and black colour for UPS & RP circuit respectively in existing conduits/raceways. with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 29.5 29.5 350.0 False None None False None False 10325.0 0 3081077 105621 None code571 POINT WIRING POINT WIRING - SWITCH CONTROL installation, Testing and Commissioning of point wiring using 3R x 1.5 Sqmm FRLS 1100V wire of approved make drawn in 20mm dia 2mm thick rigid PVC conduit including all conduit accessories such as bends, junction boxes etc., complete. The wiring shall be complete with ceiling roses, switches and all consumables. .PRIMARY LIGHT POINT with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 354.0 354.0 350.0 False None None False None False 123900.0 0 3081078 105621 None code572 SECONDARY LIGHT POINT I. Secondary light point means extention of light outlet from existing primary point. Same to be controlled by the existing switch of primary point. II. Ceiling flexible conduit shall be included at the drop of light fixture. 3 core PVC transparent clear electrical cable flex wire/cable shall be included at the drop of suspended light fixture as required Each LED strip of 5 mtr looping is considered in this line item with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 236.0 236.0 1200.0 False None None False None False 283200.0 0 3081079 105621 None code573 WITHOUT BOX 1x6A socket controlled by 16A switch - UPS power with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 147.5 147.5 250.0 False None None False None False 36875.0 0 3081080 105621 None code574 2x6/16A socket controlled by 16A switch - UPS power with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 177.0 177.0 500.0 False None None False None False 88500.0 0 3081081 105621 None code575 1x6/16A universal socket controlled by 16A switch - UPS power with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 112.1 112.1 50.0 False None None False None False 5605.0 0 3081082 105621 None code576 1x6/16A universal socket controlled by 16A switch - Raw power with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 147.5 147.5 250.0 False None None False None False 36875.0 0 3081083 105621 None code577 Hub room Rack Sockets - With Box 1No. 20A 3 pin 1phase Industrial type socket with plug top controlled by 16A DP MCB enclosed in sheet metal box with able to mount on wall / raceway with necessary accessories complete as required with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 354.0 354.0 25.0 False None None False None False 8850.0 0 3081084 105621 None code578 Industrial Sockets (to be IP 55/66) 20A Industrial socket controlled by 20A SP MCB (MCB below as separate control) enclosed in sheet metal box with necessary accessories complete as required for geyser with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 236.0 236.0 10.0 False None None False None False 2360.0 0 3081085 105621 None code579 16A 3pin 1phase Industrial socket with plug top controlled by 16A DP MCB enclosed in sheet metal box with necessary accessories complete as required with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 203.55 203.55 20.0 False None None False None False 4071.0 0 3081086 105621 None code580 32A 5pin 3phase Industrial socket with plug top controlled by 32A FP MCB enclosed in sheet metal box with necessary accessories complete as required with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos. 11.8 11.8 10.0 False None None False None False 118.0 0 3081087 105621 None code581 250 x 180 x 75mm readymade floor mounted Junction box to locate 1sets of 3x16A socket controlled by 16A switch and to locate 2data ports (excluding sockets) with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 590.0 590.0 50.0 False None None False None False 29500.0 0 3081088 105621 None code582 SITC of GI 2module back box for data outlets as per site requirement including necessary civil works (To be as per IT team requirement & to be approved by IT team before procurement). with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 35.4 35.4 50.0 False None None False None False 1770.0 0 3081089 105621 None code583 PERFORATED TRAY Slotted angle GI ready made Perforated cable trays of 14SWG. Quoted rates for installation shall include necessary anchor fasteners / L angle supports @ 600mm interval etc., screws, bolts, nuts to suit site conditions Cost to include customised bends 200mm Wide Tray with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 112.1 112.1 100.0 False None None False None False 11210.0 0 3081090 105621 None code584 100mm Wide Tray with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 88.5 88.5 100.0 False None None False None False 8850.0 0 3081091 105621 None code585 Floor Raceway 200 x 40mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 666.7 666.7 50.0 False None None False None False 33335.0 0 3081092 105621 None code586 150 x 40mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 660.8 660.8 100.0 False None None False None False 66080.0 0 3081093 105621 None code587 100 x 40mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 654.9 654.9 200.0 False None None False None False 130980.0 0 3081094 105621 None code588 Ceiling raceway Cost to include customised bends 100 x 60mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 88.5 88.5 125.0 False None None False None False 11062.5 0 3081095 105621 None code589 Junction Boxes (Floor) 250 x 250 x 50mm Size with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 100.3 100.3 20.0 False None None False None False 2006.0 0 3081096 105621 None code590 200 x 200 x 50mm Size with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 100.3 100.3 35.0 False None None False None False 3510.5 0 3081097 105621 None code591 150 x 150 x 50mm Size with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 88.5 88.5 70.0 False None None False None False 6195.0 0 3081098 105621 None code592 Junction Boxes 200 x 200 x 100mm Size with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 106.2 106.2 10.0 False None None False None False 1062.0 0 3081099 105621 None code593 Supply & Laying of following size 2mm thick rigid FRLS PVC conduits. Rate shall include wall chasing & rough plastering, clamping / fixing arrangement. 25mm dia with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 23.6 23.6 500.0 False None None False None False 11800.0 0 3081100 105621 None code594 25mm dia with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 177.0 177.0 500.0 False None None False None False 88500.0 0 3081101 105621 None code595 Installation of following size Powder coated raceway / wire way with cover, made out of 16 SWG GI/MS for body and 14 SWG GI/MS for cover.The shade shall be as per site approval 100 x 100mm Size (SERVER ROOM) with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 118.0 118.0 100.0 False None None False None False 11800.0 0 3081102 105621 None code596 Installation of following size Powder coated junction boxes , made out of 16 SWG GI/MS for body and 14 SWG GI/MS for cover. The shade shall be as per site approval 150 x 150 x 65mm Size with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 101.78 101.78 30.0 False None None False None False 3053.4 0 3081103 105621 None code597 CABLE TRAYS & RACEWAYS FOR NETWORKING & AV Floor Raceway includes AV 200 x 40mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 666.7 666.7 50.0 False None None False None False 33335.0 0 3081104 105621 None code598 150 x 40mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 660.8 660.8 100.0 False None None False None False 66080.0 0 3081105 105621 None code599 100 x 40mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 654.9 654.9 250.0 False None None False None False 163725.0 0 3081106 105621 None code600 Ceiling raceway with cover INCLUDES AV Cost to include customised bends 150 x 60mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 100.3 100.3 150.0 False None None False None False 15045.0 0 3081107 105621 None code601 200 x 100mm Size (BACKBONE) with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 147.5 147.5 150.0 False None None False None False 22125.0 0 3081108 105621 None code602 Junction Boxes (Floor) 250 x 250 x 50mm Size with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 112.1 112.1 20.0 False None None False None False 2242.0 0 3081109 105621 None code603 200 x 200 x 50mm Size with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 100.3 100.3 25.0 False None None False None False 2507.5 0 3081110 105621 None code604 200 x 200 x 50mm Size with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 100.3 100.3 90.0 False None None False None False 9027.0 0 3081111 105621 None code605 150 x 150 x 50mm Size with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 88.5 88.5 20.0 False None None False None False 1770.0 0 3081112 105621 None code606 Junction Boxes (Ceiling) 150 x 150 x 100mm Size with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 29.5 29.5 20.0 False None None False None False 590.0 0 3081113 105621 None code607 Supply & Laying of following size 2mm thick rigid FRLS PVC conduits.Rate shall include wall chasing & rough plastering, clamping / fixing arrangement. 32mm dia with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 29.5 29.5 500.0 False None None False None False 14750.0 0 3081114 105621 None code608 32mm dia (FLOOR) with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 177.0 177.0 500.0 False None None False None False 88500.0 0 3081115 105621 None code609 Supply & Installation of following size Powder coated raceway / wire way with cover, made out of 16 SWG GI/MS for body and 14 SWG GI/MS for cover.The shade shall be as per site approval 500 x 100mm Size with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 149.27 149.27 50.0 False None None False None False 7463.5 0 3081116 105621 None code610 Providing and Fixing of Cableoffill wire mesh cable tray system made outof stainless stell wires [316L AS PER NF 10-088-2] and bent into final shape , All cable trays, shall be manufactured with a longitudinal ‘T-welded’ safety edge and Trays shall be constructed with a 50 mm x 100 mm mesh configuration complete with couplers,C mountings and all accessories as required. 500 x 100mm Sizewith all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 135.7 135.7 50.0 False None None False None False 6785.0 0 3081117 105621 None code611 EARTHING installation, testing & commissioning of Maintenance Free Earth pits, eathing system shall be installed as per supplier guidelines /details. Rate shall include necessary civil works. Model : EROD 1/2X10 with GEM-25 & ERODCMP Type - 1 : Single Rod configuration with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 7080.0 7080.0 2.0 False None None False None False 14160.0 0 3081118 105621 None code612 EARTH STRIPS GI/Cu earth strips on cable tray or below ground as per site condition. All Cu. Strips shall be run in PVC heat shrinkable sleeve & mounted on insulation mounts. Cost of civil works shall be included for strips laid below ground. 25 x 3mm GI Earth flat with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 23.6 23.6 500.0 False None None False None False 11800.0 0 3081119 105621 None code613 25 x 6mm GI Earth flat with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 29.5 29.5 300.0 False None None False None False 8850.0 0 3081120 105621 None code614 Busbar of 0.5 Mtr length made out of 25 x 3 mm GI strip with drill holes of M8 at 25mm interval mounted on insulators. The box to be wth glass door cover with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 590.0 590.0 7.0 False None None False None False 4130.0 0 3081121 105621 None code615 Busbar of 0.5 Mtr length made out of 25 x 3 mm Cu. strip with drill holes of M8 at 25mm interval mounted on insul ators. with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 531.0 531.0 7.0 False None None False None False 3717.0 0 3081122 105621 None code616 Busbar of 0.5 Mtr length made out of 25 x 6 mm Cu. strip with drill holes of M8 at 25mm interval mounted on insulators. with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 531.0 531.0 7.0 False None None False None False 3717.0 0 3081123 105621 None code617 PVC Insulated Copper Conductor Unarmoured Cables (YY Type) 1.1kV grade, copper conductor, PVC insulated, unarmoured, power cables. The cables shall be laid on tray / hume pipe /in ready made trenches, with nylon cable ties / MS Clamps @ 600mm interval etc., as required. Rate quoted shall exclude cost of tray / hume pipe 1 Core x 10 Sq. Mm with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 23.6 23.6 245.0 False None None False None False 5782.0 0 3081124 105621 None code618 Endterminations with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 59.0 59.0 14.0 False None None False None False 826.0 0 3081125 105621 None code619 1 Core x 6Sq. mm including Terminations with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 23.6 23.6 150.0 False None None False None False 3540.0 0 3081126 105621 None code620 1 Core x 4Sq. mm including Terminations with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 21.24 21.24 150.0 False None None False None False 3186.0 0 3081127 105621 None code621 1 Core x 2.5Sq. mm including Terminations with all lead and lifts complete as per specifications and directions of engineer in charge of the work. m 18.88 18.88 150.0 False None None False None False 2832.0 0 3081128 105621 None code622 MISCELLANEOUS ITEMS RCC Hume pipe ( For road crossing ) of following size 900mm below ground level, including collars & civil works. Rubber mat 1100V grade ISI approved - 2 m x 1m with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 88.5 88.5 7.0 False None None False None False 619.5 0 3081129 105621 None code623 Shock treatment chart as approved by the Electrical Inspectorate mounted on teak wood frame and suitable for wall mounting. with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 76.7 76.7 7.0 False None None False None False 536.9 0 3081130 105621 None code624 First aid kit with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 76.7 76.7 7.0 False None None False None False 536.9 0 3081131 105621 None code625 Danger boards with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 53.1 53.1 7.0 False None None False None False 371.7 0 3081132 105621 None code626 Laminated SLD with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 17.7 17.7 7.0 False None None False None False 123.9 0 3081133 105621 None code627 Following type Fire extinguisher with mounting hook / bracket and discharge horn. MS Fabricated Items (power coated) (To be used for light and other addiitonal supports) with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Kgs 41.3 41.3 100.0 False None None False None False 4130.0 0 3081134 105621 None code628 Supply & fixing of rubber gloves of Approved Make & as per supply voltage with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 53.1 53.1 7.0 False None None False None False 371.7 0 3081135 105621 None code629 MS box /angle support of suitable size for suspending the lights below services and to route cable in same for connectivity with necessary accessories. ( Support for fixtures below AC duct) with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 147.5 147.5 70.0 False None None False None False 10325.0 0 3081136 105621 None code630 Professional Charges: Professional charges towards filing application, preparation of drawings in necessary formats for approval, follow up and arranging approval of drawings, scheme by Local electricity authority Electrical Inspectorate, obtaining clearance from electricity authority / Electrical Inspectorate. LS 118000.0 118000.0 1.0 False None None False None False 118000.0 0 3081137 105621 None code631 As built drawings: Preparation and Submission of as built drawings of total work executed (5 Sets hard and 5 Sets soft copy) with all lead and lifts complete as per specifications and directions of engineer in charge of the work. LS 5900.0 5900.0 1.0 False None None False None False 5900.0 0 3081138 105621 None code632 Temporary Lighting & Power arrangement with sufficient temporary Lighting ( Min 200Lux Ave. ) & power shall be provided to all agencies during execution with required no. of Industrial type FTL light fixtures & socket outlets, till commissioning stage. with all lead and lifts complete as per specifications and directions of engineer in charge of the work. LS 23600.0 23600.0 1.0 False None None False None False 23600.0 0 3081139 105621 None code633 SUPPLY PORTION FOR DG WORKS: 250 KVA DG SET WITH ACOUSTIC ENCLOSURE with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 1121000.0 1121000.0 1.0 False None None False None False 1121000.0 0 3081140 105621 None code634 180 KVA DG SET WITH ACOUSTIC ENCLOSURE with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 885000.0 885000.0 1.0 False None None False None False 885000.0 0 3081141 105621 None code635 Engine Mounted ACB enclosures: DG isolator Panel As per SLD with PCC Sync controller shall be mounted on the alternator with necessary supports, anti-vibration connections, mounting brackets, MS stand, clamps etc. and suitable size of flexible copper bus bars / univyn cables between DG alternator terminal to the box.400 A ACB with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 413000.0 413000.0 1.0 False None None False None False 413000.0 0 3081142 105621 None code636 315 A ACB with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 236000.0 236000.0 1.0 False None None False None False 236000.0 0 3081143 105621 None code637 Piping for fuel System: Supply, Installation, Testing and Commissioning of Fuel supply system with Class C MS pipes / plates including supports and all accessories as per the following and technical specifications. (MS supports shall be measur ed under steel Item) MS pipes 50 mm dia (DG Day tank and to DG Set) with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Rmtr 1534.0 1534.0 40.0 False None None False None False 61360.0 0 3081144 105621 None code638 Ball valves 50 mm Dia Ball Valves with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 4130.0 4130.0 4.0 False None None False None False 16520.0 0 3081145 105621 None code639 EXHAUST SYSTEM Supply of Class B MS pipe of 5.5mm thick suitable for DG set cladded with 50mm thick mineral Glass wool insulation covered with 24SWG Aluminium sheet and provided with rain cap as per specification supporting on wall, ceiling and bends. 250mm dia. Exhaust Pipe with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Rmtr 11564.0 11564.0 80.0 False None None False None False 925120.0 0 3081146 105621 None code640 Silencer Silencer Insulation 50mm thick lightly resin bonded (LRB) rock wool (64 Kg/m3 density) insulation clad with 26 SWG aluminium sheet cladding. with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 7080.0 7080.0 2.0 False None None False None False 14160.0 0 3081147 105621 None code641 MS supports Supply of MS steel structure & painting with two coats of primer zinc oxide and two coats of approved enamel paint. All MS supports shall be measured in this line item (DG Stack & DG day tank Supports)Quoted price shall be inclusive of Supporting arrangement at all levels & for the metal deck slab shall be with Wedge/ Gripple / Lindapter / fischer fixing arrangement for TR 60 / TR 80 metal decks. (Vendor has to submit Structural design calculation and all necessary supports within the building area shall be reviewed and confirmed by Consultant before execution. with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Kgs 177.0 177.0 1290.0 False None None False None False 228330.0 0 3081148 105621 None code642 CONTROL CABLING 2C X 6 Sq.mm XLPE insulated and armoured copper conductor control cables with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Rmtr 147.5 147.5 120.0 False None None False None False 17700.0 0 3081149 105621 None code643 Termination of above Cables using Brass Double Compression glands & Tinned Copper Crimpinglugs with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 70.8 70.8 4.0 False None None False None False 283.2 0 3081150 105621 None code644 4C X 2.5 Sq.mm XLPE insulated armoured copper conductor control cables with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Rmtr 236.0 236.0 120.0 False None None False None False 28320.0 0 3081151 105621 None code645 Termination of above Cables using Brass Double Compression glands & Tinned Copper Crimpinglugs with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 88.5 88.5 4.0 False None None False None False 354.0 0 3081152 105621 None code646 24 C X 1.5 Sq.mm XLPE insulated armoured copper conductor control cables with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Rmtr 1062.0 1062.0 120.0 False None None False None False 127440.0 0 3081153 105621 None code647 Termination of above Cables using Brass Double Compression glands & Tinned Copper Crimpinglugs with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 118.0 118.0 4.0 False None None False None False 472.0 0 3081154 105621 None code648 4 C X 2.5 Sq.mm Shielded Flexible copper conductor control cables with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Rmtr 236.0 236.0 100.0 False None None False None False 23600.0 0 3081155 105621 None code649 Termination of above Cables using Brass Double Compression glands & Tinned Copper Crimpinglugs with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 59.0 59.0 4.0 False None None False None False 236.0 0 3081156 105621 None code650 LIASIONING WORKS Assisting in Obtaining statutory approval including preparation of necessary drawings and documentation. with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Assisting in Obtaining Pollution Control Board consent for the installation of DG sets. (It shall be in Client scope but co-ordination and and related drawing to be provided by Vendor) with all lead and lifts complete as per specifications and directions of engineer in charge of the work. LS 118000.0 118000.0 1.0 False None None False None False 118000.0 0 3081157 105621 None code651 Provide necessary coordination with Electrical contractor, Project Managers, Consultant and Client for providing the drawings, schemes, layout, calculation to obtaining CEIG approval for Nos 1 x 500kVA DG sets installation (It shall be in Electrical vendor scope but co-ordination and and related drawing to be provided by DG Vendor) with all lead and lifts complete as per specifications and directions of engineer in charge of the work. LS 70800.0 70800.0 1.0 False None None False None False 70800.0 0 3081158 105621 None code652 LABOUR CHARGES FOR DG WORKS: 250 KVA DG SET WITH ACOUSTIC ENCLOSURE with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 41300.0 41300.0 1.0 False None None False None False 41300.0 0 3081159 105621 None code653 180 KVA DG SET WITH ACOUSTIC ENCLOSURE with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 41300.0 41300.0 1.0 False None None False None False 41300.0 0 3081160 105621 None code654 Engine Mounted ACB enclosures: DG isolator Panel As per SLD with PCC Sync controller shall be mounted on the alternator with necessary supports, anti-vibration connections, mounting brackets, MS stand, clamps etc. and suitable size of flexible copper bus bars / univyn cables between DG alternator terminal to the box.400 A ACB with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 29500.0 29500.0 1.0 False None None False None False 29500.0 0 3081161 105621 None code655 315 A ACB with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 23600.0 23600.0 1.0 False None None False None False 23600.0 0 3081162 105621 None code656 Piping for fuel System: Supply, Installation, Testing and Commissioning of Fuel supply system with Class C MS pipes / plates including supports and all accessories as per the following and technical specifications. (MS supports shall be measured under steel Item) MS pipes 50 mm dia (DG Day tank and to DG Set) with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Rmtr 354.0 354.0 40.0 False None None False None False 14160.0 0 3081163 105621 None code657 Ball valves 50 mm Dia Ball Valves with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 590.0 590.0 4.0 False None None False None False 2360.0 0 3081164 105621 None code658 EXHAUST SYSTEM Erection, Testing and Commissioning of Class B MS pipe of 5.5mm thick suitable for DG set cladded with 50mm thick mineral Glass wool insulation covered with 24SWG Aluminium sheet and provided with rain cap as per specification supporting on wall, ceiling and bends. 250mm dia. Exhaust Pipe with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Rmtr 1770.0 1770.0 80.0 False None None False None False 141600.0 0 3081165 105621 None code659 Silencer Silencer Insulation 50mm thick lightly resin bonded (LRB) rock wool (64 Kg/m3 density) insulation clad with 26 SWG aluminium sheet cladding. with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 472.0 472.0 2.0 False None None False None False 944.0 0 3081166 105621 None code660 MS supports Fabrication, Commissioning and Erection of MS steel structure & painting with two coats of primer zinc oxide and two coats of approved enamel paint. All MS supports shall be measured in this line item (DG Stack & DG day tank Supports)Quoted price shall be inclusive of Supporting arrangement at all levels & for the metal deck slab shall be with Wedge/ Gripple / Lindapter / fischer fixing arrangement for TR 60 / TR 80 metal decks. (Vendor has to submit Structural design calculation and all necessary supports within the building area shall be reviewed and confirmed by Consultant before execution. with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Kgs 29.5 29.5 1290.0 False None None False None False 38055.0 0 3081167 105621 None code661 CONTROL CABLING 2C X 6 Sq.mm XLPE insulated and armoured copper conductor control cables with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Rmtr 29.5 29.5 120.0 False None None False None False 3540.0 0 3081168 105621 None code662 Termination of above Cables using Brass Double Compression glands & Tinned Copper Crimpinglugs with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 17.7 17.7 4.0 False None None False None False 70.8 0 3081169 105621 None code663 4C X 2.5 Sq.mm XLPE insulated armoured copper conductor control cables with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Rmtr 59.0 59.0 120.0 False None None False None False 7080.0 0 3081170 105621 None code664 Termination of above Cables using Brass Double Compression glands & Tinned Copper Crimpinglugs with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 29.5 29.5 4.0 False None None False None False 118.0 0 3081171 105621 None code665 24 C X 1.5 Sq.mm XLPE insulated armoured copper conductor control cables with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Rmtr 147.5 147.5 120.0 False None None False None False 17700.0 0 3081172 105621 None code666 Termination of above Cables using Brass Double Compression glands & Tinned Copper Crimpinglugs with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 41.3 41.3 4.0 False None None False None False 165.2 0 3081173 105621 None code667 4 C X 2.5 Sq.mm Shielded Flexible copper conductor control cables with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Rmtr 59.0 59.0 100.0 False None None False None False 5900.0 0 3081174 105621 None code668 Termination of above Cables using Brass Double Compression glands & Tinned Copper Crimpinglugs with all lead and lifts complete as per specifications and directions of engineer in charge of the work. Nos 29.5 29.5 4.0 False None None False None False 118.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1710451142000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1710451142000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1710451142000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1710451155000 0 None None ELIGIBILITY All terms and conditions are as per bid document None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None To qualify for award of this contract, each Tenderer whether his name should have in the last five years period 2018-19 to 2022-23. The Tenderer should have satisfactory completed as a prime contractor for at least one similar nature of construction of buildings with interior decoration, flooring with tiles, water supply, sanitary & electrical works etc., as per the detailed scope of work mentioned in the relevant clauses of value not less than Rs.1140.00 lakhs Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Executed in any one financial year, the following minimum quantities of work (80% quantity of work put to tender): Certificates of proof shall be issued from competent authority not below the rank of Executive Engineer in Government/Public Sectors/ Government Undertaking Organizations only will be considered for bid evaluation. (Quantities executed and work done certificates/work quantity certificates issued under Joint Venture/consortium/ private firms/private organizations/private individuals /partial turnkey shall not be considered for bid evaluation) (1) PCC/RCC: 628 cum, (2) Steel: 157 tonne, (3) Plastering: 5818 cum, (4) Cement Block Masonry: 644 sqm, (5) Floor tiles: 2979 sqm, (6) PVC pipes: 2667 sqm Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Each Tenderer should further demonstrate: Availability by owning at least 50% of the required / specified critical equipment for this work and remaining 50% can be deployed on lease / hire basis the following key and critical equipment for this work in good working condition Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Relevant documents of Plants & Equipment None None None None Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity: (A x N x 1.5 - B), Where, A: Maximum value of Civil Engineering works executed in any one year during the last five years (updated to 2023-24 price level) taking into account the completed as well as works in progress, N: Number of years prescribed for completion of the works for which tenders are invited. B:Value, at 2023-24 price level, of existing commitments and on-going works to be completed during the next 08 months Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Bid capacity of tender None None None None To qualify for award of this contract, each Tenderer whether his name should have in the last five years period 2018-19 to 2022-23. Achieved in at least two financial years a minimum financial turnover of Rs.4560.00 Lakhs. (Civil Contract works) Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Each Tenderer should further demonstrate: liquid assets and /or availability of credit facilities of not less than Rs.684.00 lakhs (Credit lines/ letter of credit/ certificates from banks for permitting the fund requirement etc-equivalent of the estimated cash flow for the months in the peak construction period) Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit
tenderCriterionDocumentList	documentName optional documentTypeText Annual Turnover Certificate True Technical Bid Company Registration Certificate True Technical Bid
tenderWorkLocationList
tenderAddress	createdTs 1710451848000 version 0 createdDate None modifiedDate None blockNumber No.49, East Wing , 4th and 5th Floor, Khanija Bhavan Race Course Road street None city Bengaluru state Karnataka pin 560001
tenderRecallDTO	None