1710430399000 | 0 | None | None | Roads | Construction of CC Road in SC Colony at Basvanwadi Thanda in Aurad (B) Taluka. | 1266803.24 | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
---|
3076397 | 105218 | None | Vol-3 It. No. 3.7 Basic Rate Rs. 105.00 | Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction. | Cum | 110.25 | 110.25 | 134.4 | False | None | None | False | None | False | 14817.6 | 0 | 3076398 | 105218 | None | Vol-1 It. No. 1.8 Basic Rate Rs. 474.00 | Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour, rolling, water, all materials, usage & all other appurtenaces required to complete the work. | Cum | 497.7 | 497.7 | 134.4 | False | None | None | False | None | False | 66890.88 | 0 | 3076399 | 105218 | None | Vol-3 It. No. 4.2 B (v) Basic Rate Rs. 2359.00 | Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front end loader at OMC and compacting with vibratory roller to achieve the desired density, complete as per clause 401. For Grading -V Material. | Cum | 2476.95 | 2476.95 | 67.2 | False | None | None | False | None | False | 166451.04 | 0 | 3076400 | 105218 | None | Vol-3 It. No. 16.27 Basic Rate Rs. 6374.00 | Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), coarse and fine aggregates conforming to IS:383:2016, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including construction joints, , primer, sealant , curing of concrete slabs for 14-days, and water finishing to lines and grade as per drawing and technical specification clause 1501 with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc., complete. as per the directions of the Engineer-in-charge of the work. | Cum | 6692.7 | 6692.7 | 134.4 | False | None | None | False | None | False | 899498.88 | 0 | 3076401 | 105218 | None | Vol-1 It. No. 2.5.1 Basic Rate Rs. 6630.00 | Providing and laying in position Reinforced cement concrete for all
Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregatesas per relevant IS Codes machine mixed with super plasticisers laid inlayers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M20 Design Mix Using 20 mm nominal size graded crushed coarse
aggregates. | Cum | 7309.58 | 7309.58 | 9.49 | False | None | None | False | None | False | 69367.9142 | 0 | 3076402 | 105218 | None | Vol-1 It. No. 2.11 H Basic Rate Rs. 79011.00 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. All other type of structures. | Tonne | 82961.55 | 82961.55 | 0.6 | False | None | None | False | None | False | 49776.93 | 0 |
|