createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1710333110563 version 5 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 5000.00 emd 768000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 16-04-2024 17:00:00 tenderQueryClose 15-04-2024 17:00:00 technicalBidOpen 18-04-2024 10:30:00 publishedDate 14-03-2024 19:40:13 publishedByPost DUDC_EE2_BGV publishedByUser KPE12049 - PADMAKANT J SHENDURE bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate 16-03-2024 11:30:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson PJ Shendure Executive Engineer splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 9739734811 mobileNumber 9739734811 tenderSupplierList None
tenderSchedule	createdTs 1710333110594 version 4 createdDate None modifiedDate None tenderNumber DMA/2023-24/BD/WORK_INDENT17285 title Construction of Sub Regional Science Center at Raja Lakhamagowda Dam (Hidkal Dam), Hukkeri Taluka, Belagavi District. description Construction of Sub Regional Science Center at Raja Lakhamagowda Dam (Hidkal Dam), Hukkeri Taluka, Belagavi District. category WORKS categoryText Works ecv 70000000.00 deptName Directorate of Municipal Administration status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 2213 locationName DMA District Urban Development Cell Belagavi provisionalAmount 70000000.0 groupOverheadTotal 18783235.36 fileNumber BGM/DUDC/4/CR/SCIENCE/TECH/01
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1710333111000 0 None None Buildings Construction of Sub Regional Science Center 42958879.11 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3047891 103024 None 001 Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness. By Mechanical Means using Dozer In area of thorny jungle Vol-1 (pg no 9, I No 2.5 /ii/b) 100 Sqm 508.2 508.2 102.6 False None None False None False 52141.32 0 3047892 103024 None 002 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth Vol-1 (pg no 8, I No 1.12) Cum 99.75 99.75 1092.0 False None None False None False 108927.0 0 3047893 103024 None 003 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3m Vol-1 (pg no 8, I No 1.14.1) a) in all types of soils 90% of qty Cum 107.1 107.1 1893.35 False None None False None False 202777.785 0 3047894 103024 None 004 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work ordinary rock/Soft rock / with out blasting upto 1.5m depth Vol-1 (pg no 8, I No 1.15.1) b) Soft rock /ordinary rock(with out blasting) 10% of qty Cum 381.15 381.15 210.37 False None None False None False 80182.5255 0 3047895 103024 None 005 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. Vol-2 (pg no 5, I No 4.1) Sqm 123.9 123.9 1770.91 False None None False None False 219415.749 0 3047896 103024 None 006 Providing and laying in position Cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates Vol-1 (pg no 15, I No 2.1.3) Cum 6288.45 6288.45 345.31 False None None False None False 2171464.6695 0 3047897 103024 None 007 Providing and laying in position Cement concrete for all Foundation works. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates including Additional for formwork, Centering & Scaffolding for Sl No 1 a: Foundation upto plinth Isolated As per Addendum-I in Volume-1 of page No.-111 (@8% of Finished Rate) Vol-1 (pg no 15, I No 2.2.3) Cum 7185.02 7185.02 359.27 False None None False None False 2581362.1354 0 3047898 103024 None 008 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates including Additional for formwork, Centering & Scaffolding for Sl No 9: RCC Columns As per Addendum-I in Volume-1 of page No.-111 (@70% of Finished Rate) Vol-1 (pg no 16, I No 2.4.3) Cum 11309.76 11309.76 34.3 False None None False None False 387924.768 0 3047899 103024 None 009 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates including Additional for formwork, Centering & Scaffolding for Sl No 11: Earth retaining structures As per Addendum-I in Volume-1 of page No.-112 (@10% of Finished Rate) Vol-1 (pg no 16, I No 2.4.3) Cum 7318.08 7318.08 68.76 False None None False None False 503191.1808 0 3047900 103024 None 010 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Vol-1 (pg no 7, I No 1.9) Cum 279.3 279.3 2103.72 False None None False None False 587568.996 0 3047901 103024 None 011 Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Vol-1 (pg no 7, I No 1.11) Cum 454.65 454.65 639.17 False None None False None False 290598.6405 0 3047902 103024 None 012 Providing and laying in position Cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. including Additional for formwork, Centering & Scaffolding for Sl No 9 : RCC Columns As per Addendum-I in Volume-1 of page No.-111 (@70% of Finished Rate) Ground Floor Vol-1 (pg no 16, I No 2.5.2) Cum 12214.75 12214.75 60.545 False None None False None False 739542.03875 0 3047903 103024 None 013 Providing and laying in position Cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. including Additional for formwork, Centering & Scaffolding for Sl No 1.a Plinth beam of buildings As per Addendum-I in Volume-1 of page No.-111 (@50% of Finished Rate) Ground Floor Vol-1 (pg no 16, I No 2.5.2) Cum 10777.72 10777.72 136.39 False None None False None False 1469973.2308 0 3047904 103024 None 014 Providing and laying in position Cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. including Additional for formwork, Centering & Scaffolding for Sl No 14 : beam & lintels of buildings As per Addendum-I in Volume-1 of page No.-112 (@60% of Finished Rate) Ground Floor Vol-1 (pg no 16, I No 2.5.2) Cum 11496.24 11496.24 133.07 False None None False None False 1529804.6568 0 3047905 103024 None 015 Providing and laying in position Cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. including Additional for formwork, Centering & Scaffolding for Sl No 19 : Chejjas, Canopy & Other Architectural projections of minor sections As per Addendum-I in Volume-1 of page No.-112 (@45% of Finished Rate)Ground Floor Vol-1 (pg no 16, I No 2.5.2) Cum 10418.47 10418.47 3.15 False None None False None False 32818.1805 0 3047906 103024 None 016 Providing and laying in position Cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. including Additional for formwork, Centering & Scaffolding for Sl No 20 : Curved RCC Roof slab, Domes & Sloped Roofs As per Addendum-I in Volume-1 of page No.-112 (@70% of Finished Rate) Ground Floor Vol-1 (pg no 16, I No 2.5.2) Cum 12214.75 12214.75 268.9 False None None False None False 3284546.275 0 3047907 103024 None 017 Providing and laying in position Cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. including Additional for formwork, Centering & Scaffolding for Sl No 16 : Staircase and other similiar structure As per Addendum-I in Volume-1 of page No.-112 (@50% of Finished Rate) Ground Floor Vol-1 (pg no 16, I No 2.5.2) Cum 10777.72 10777.72 25.04 False None None False None False 269874.1088 0 3047908 103024 None 018 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification a. Buildings Vol-1 (pg no 18, I No 2.11(a)) Tonne 93929.85 93929.85 119.3 False None None False None False 11205831.105 0 3047909 103024 None 019 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Vol-2 (pg no 14, I No 6.8) Cum 8367.45 8367.45 292.359 False None None False None False 2446299.31455 0 3047910 103024 None 020 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Vol-2 (pg no 14, I No 6.8) First Floor Cum 8451.12 8451.12 107.85 False None None False None False 911453.292 0 3047911 103024 None 021 Providing Half Brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Vol-2 (pg no 14, I No 6.15) Sqm 1084.65 1084.65 74.39 False None None False None False 80687.1135 0 3047912 103024 None 022 Providing and laying in position Cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. y) Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates Vol-1 (pg no 16, I No 2.4.1) Cum 6724.2 6724.2 10.59 False None None False None False 71209.278 0 3047913 103024 None 023 Providing and laying in position Cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. y) Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates Vol-1 (pg no 16, I No 2.4.1) First Floor Cum 6791.44 6791.44 9.4564 False None None False None False 64222.573216 0 3047914 103024 None 024 Providing 12 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Vol-2 (pg no 41, I No 8.1.1) Sqm 267.75 267.75 1879.63 False None None False None False 503270.9325 0 3047915 103024 None 025 Providing 12 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Vol-2 (pg no 41, I No 8.1.1) First Floor Sqm 270.42 270.42 48.38 False None None False None False 13082.9196 0 3047916 103024 None 026 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. Vol-2 (pg no 42, I No 8.8) Sqm 389.55 389.55 2111.81 False None None False None False 822655.5855 0 3047917 103024 None 027 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. Vol-2 (pg no 42, I No 8.8) First Floor Sqm 393.44 393.44 1104.68 False None None False None False 434625.2992 0 3047918 103024 None 028 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineerin-Charge. Vol-2 (pg no 43, I No 8.12) Kg 67.2 67.2 316.77 False None None False None False 21286.944 0 3047919 103024 None 029 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineerin-Charge. Vol-2 (pg no 43, I No 8.12) First Floor Kg 67.87 67.87 165.702 False None None False None False 11246.19474 0 3047920 103024 None 030 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 20 mm to 25 mm wide to required depth. Vol-2 (pg no 54, I No 8.80) m 69.3 69.3 659.0 False None None False None False 45668.7 0 3047921 103024 None 031 Providing and fixing plaster mesh 150mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120gms per sqm width, along route of walls chipped for services,junction between RCC and brick walls including cost of Materials, labour for fixing complete as per specifications(length of mesh only be measured for payment) Vol-2 (pg no 43, I No 8.16.2) m 39.9 39.9 1478.4 False None None False None False 58988.16 0 3047922 103024 None 032 Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup boards including cost of all materials, labour, providing and removing form work usage charges, curing, complete as per specifications Vol-2 (pg no 44, I No 8.16 a) Sqm 1299.9 1299.9 9.81 False None None False None False 12752.019 0 3047923 103024 None 033 Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete.. Size of Tile 600x1200 mm Vol-2 (pg no 60, I No 9.12.5) Sqm 1379.7 1379.7 926.71 False None None False None False 1278581.787 0 3047924 103024 None 034 Providing and laying Cement concrete flooring 40 mm thick with 20 mm nominal size stone aggregate using 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry complete. Vol-2 (pg no 59, I No 9.1) Sqm 473.55 473.55 231.57 False None None False None False 109659.9735 0 3047925 103024 None 035 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. Vol-2 (pg no 60, I No 9.11) Sqm 933.45 933.45 66.78 False None None False None False 62335.791 0 3047926 103024 None 036 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Vol-2 (pg no 65, I No 9.39) Sqm 1521.45 1521.45 161.81 False None None False None False 246185.8245 0 3047927 103024 None 037 Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab , including cost of materials, labour, curing, polishing complete as per specifications. Vol-2 (pg no 64, I No 9.36) Sqm 1732.5 1732.5 11.76 False None None False None False 20374.2 0 3047928 103024 None 038 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slabover 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. Vol-2 (pg no 63, I No 9.24) Sqm 2994.6 2994.6 826.46 False None None False None False 2474917.116 0 3047929 103024 None 039 Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge Vol-2 (pg no 69, I No 10.2) m 344.4 344.4 207.06 False None None False None False 71311.464 0 3047930 103024 None 040 Providing & supplying Carpet/Mat of 800+ gsm with stain proof, flexible and super absorbent fibre of good quality as per direction of Engineer in charge. Vol-2 (pg no 220, I No 22.28) Sqm 1470.0 1470.0 231.578 False None None False None False 340419.66 0 3047931 103024 None 041 Providing and fixing of clay tiles for cladding tiles of size 230x75x10mm thick on 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) & jointed with Adhesive/cement slurry over rough plaster surface excluding cost of rough plastered surface and the surface is painted with red apex paint and black apex paint into the groves. The work includes cost of all materials, labour charges for all items of work, usage charges for equipment, etc., complete as per specification. Vol-2 (pg no 72, I No 10.20) Sqm 1997.1 1997.1 574.95 False None None False None False 1148232.645 0 3047932 103024 None 042 Providing and fixing of clay tiles for cladding tiles of size 230x75x10mm thick on 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) & jointed with Adhesive/cement slurry over rough plaster surface excluding cost of rough plastered surface and the surface is painted with red apex paint and black apex paint into the groves. The work includes cost of all materials, labour charges for all items of work, usage charges for equipment, etc., complete as per specification. Vol-2 (pg no 72, I No 10.20) First floor Sqm 2017.07 2017.07 106.95 False None None False None False 215725.6365 0 3047933 103024 None 043 Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications. Vol-2 (pg no 99, I No 12.11) Cum 144977.7 144977.7 1.99 False None None False None False 288505.623 0 3047934 103024 None 044 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. Vol-2 (pg no 104, I No 12.51) Nos 1066.8 1066.8 16.0 False None None False None False 17068.8 0 3047935 103024 None 045 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 35 mm thick one side teak and one side commercial Vol-2 (pg no 105, I No 12.57.5) Sqm 4091.85 4091.85 56.16 False None None False None False 229798.296 0 3047936 103024 None 046 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately) Size 62x100mm Vol-2 (pg no 111, I No 12.93.1) m 737.1 737.1 34.2 False None None False None False 25208.82 0 3047937 103024 None 047 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges. (Cost of Fixtures to be paid separately) 30mm thickness Vol-2 (pg no 111, I No 12.94.1) Sqm 3659.25 3659.25 9.45 False None None False None False 34579.9125 0 3047938 103024 None 048 Providing& fixing of Fixed/Openable door made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the openable frame. The frame having overall size of 60mm x 55mm with GI reinforcement of 1mm thickness and openable sash with overall size of 60mm x 102mm and GI reinforcement of 2mm thickness. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 34 mm. Windows shall be provided with 6mm plain float glass, Standard hardware with 2D/3D hinge & Multi point locking system with Handle. Wall thickness of frame & sash shall be of 2mm-2.5mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) Vol-2 (pg no 111, I No 12.92) Sqm 6557.25 6557.25 22.64 False None None False None False 148456.14 0 3047939 103024 None 049 Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having a overall size of 60mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm X 58mm with GI reinforcement of 1mm for the frame and 1.5 mm for the sash.Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2-2.5 mm. Maximum possible size 1819mm1819mm The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made Vol-2 (pg no 110, I No 12.88 Sqm 5659.5 5659.5 13.5 False None None False None False 76403.25 0 3047940 103024 None 050 Providing fixing of louvered ventilator made out of multi chambered UPVC Matching to RAL9016 sections and with minimum TiO2 Titanium Dioxide at 6PHR with TPE Thermo Plastic Elastomer and lead free with gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through out the ventilator frame The frame having verall size of 39mm 39mm with GI reinforcement of 1mm thickness Louver clip in Aluminium powder coated in white will be used on the frame along with plastic parts for fixing the 4 mm pin head glass Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.The cost is inclusive of all fixtures and separate charges for minor TPs shall not be made) Vol2 (pg no 109, I No 12.85) Sqm 6004.95 6004.95 24.44 False None None False None False 146760.978 0 3047941 103024 None 051 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. Vol-2 (pg no 86, I No 11.34B) Kg 192.15 192.15 883.64 False None None False None False 169791.426 0 3047942 103024 None 052 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Vol-2 (pg no 50 I No 8.51) Sqm 105.0 105.0 3736.53 False None None False None False 392335.65 0 3047943 103024 None 053 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. Vol-2 (pg no 50 I No 8.51) First Floor Sqm 106.05 106.05 48.38 False None None False None False 5130.699 0 3047944 103024 None 054 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade, afterthoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life). Vol-2 (pg no 46, I No 8.33.1) Sqm 165.9 165.9 3736.53 False None None False None False 619890.327 0 3047945 103024 None 055 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade, afterthoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life). Vol-2 (pg no 46, I No 8.33.1) First Floor Sqm 167.55 167.55 48.38 False None None False None False 8106.069 0 3047946 103024 None 056 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Vol-2 (pg no 46, I No 8.32) Sqm 163.8 163.8 1536.84 False None None False None False 251734.392 0 3047947 103024 None 057 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Vol-2 (pg no 46, I No 8.32) First Floor Sqm 165.43 165.43 997.73 False None None False None False 165054.4739 0 3047948 103024 None 058 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Vol-2 (pg no 46, I No 8.33.2) Sqm 144.9 144.9 68.35 False None None False None False 9903.915 0 3047949 103024 None 059 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Vol-2 (pg no 47, I No 8.33.3) Sqm 145.95 145.95 37.94 False None None False None False 5537.343 0 3047950 103024 None 060 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Vol-2 (pg no 85, I No 11.28) Kg 593.25 593.25 373.2 False None None False None False 221400.9 0 3047951 103024 None 061 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 125x64x1.90mm . Vol-2 (pg no 107, I No 12.74.1) Nos 107.1 107.1 104.0 False None None False None False 11138.4 0 3047952 103024 None 062 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 75x47x1.80mm Vol-2 (pg no 107, I No 12.74.3) Nos 75.6 75.6 24.0 False None None False None False 1814.4 0 3047953 103024 None 063 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete Vol-2 (pg no 108, I No 12.60) Nos 1104.6 1104.6 16.0 False None None False None False 17673.6 0 3047954 103024 None 064 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in chargee SS Tower Bolts 250x10mm Vol-2 (pg no 218, I No 22.15.7) Nos 210.0 210.0 16.0 False None None False None False 3360.0 0 3047955 103024 None 065 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in chargee SS Tower Bolts 150x10mm Vol-2 (pg no 218, I No 22.15.5) Nos 126.0 126.0 6.0 False None None False None False 756.0 0 3047956 103024 None 066 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in chargee SS Aldrop 16mm dia, 300mm Vol-2 (pg no 218, I No 22.15.4) Nos 393.75 393.75 32.0 False None None False None False 12600.0 0 3047957 103024 None 067 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in chargee SS Aldrop 16mm dia, 200mm Vol-2 (pg no 218, I No 22.15.3) Nos 315.0 315.0 12.0 False None None False None False 3780.0 0 3047958 103024 None 068 Providing and fixing stainless steel 304 grade fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-incharge. 200mm length Vol-2 (pg no 218, I No 22.15.3) Nos 1575.0 1575.0 32.0 False None None False None False 50400.0 0 3047959 103024 None 069 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete Vol-2 (pg no 105, I No 12.59) Nos 1169.7 1169.7 28.0 False None None False None False 32751.6 0 3047960 103024 None 070 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Vol-2 (pg no 78, I No 11.6.1) Sqm 2764.65 2764.65 19.2 False None None False None False 53081.28 0 3047961 103024 None 071 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification Vol-2 (pg no 149, I No 15.10) Sqm 866.42 866.42 1818.03 False None None False None False 1575177.5526 0 3047962 103024 None 072 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/m2 (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flang s of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum moisture resistant board Vol-2 (pg no 25, I No 7.32.3) Sqm 1203.3 1203.3 152.838 False None None False None False 183909.9654 0 3047963 103024 None 073 Providing & Fixing of Mineral Fibre Acoustical Suspended Ceiling System in module size of 600 x 600 x 20mm with Exposed Grid for Hospitals, Shopping malls, Commercial establishments and office complexes. The tiles should have Humidity Resistance (RH) of 99%, NRC 0.7, Light Reflectance 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 I Class 1 (BS 476 pt- 6 & 7)with sand texture finish andsuitable for Green Building application with Recycled content of 47%. The tile shall be laid on 24 mm wide T- section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 38mm and a load carrying capacity of 15 kg/m2 &pull out strength of minimum 100 kg The T Sections should have a Galvanizing of 90 g/m2 and need to be installed with Suspension system. Vol-2 (pg no 32, I No 7.53) Sqm 2824.5 2824.5 101.892 False None None False None False 287793.954 0 3047964 103024 None 074 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour,usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Vol-2 (pg no 82, I No 11.16.1) Kg 144.22 144.22 133.28 False None None False None False 19221.6416 0 3047965 103024 None 075 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Vol-2 (pg no 26, I No 7.38) Sqm 602.36 602.36 27.75 False None None False None False 16715.49 0 3047966 103024 None 076 Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Vol-2 (pg no 45, I No 8.29) Sqm 297.15 297.15 54.11 False None None False None False 16078.7865 0 3047967 103024 None 077 Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front end loader at OMC and compacting with vibratory roller to achieve the desired density, complete as per clause 401 (v) For Grading -V Material Vol-3 (pg no 23, I No 4.2 B (V)) Cum 2476.95 2476.95 46.88 False None None False None False 116119.416 0 3047968 103024 None 078 Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course onwell prepared surface and compacting with vibratory roller to achieve the desired density. Vol-2 (pg no 26, I No 4.17) Cum 2686.95 2686.95 46.88 False None None False None False 125964.216 0 3047969 103024 None 079 Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.Vol-2 (pg no 63, I No 9.25) Sqm 840.0 840.0 468.75 False None None False None False 393750.0 0 3047970 103024 None 080 Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of PCC shall be paid extra) 300 x 250 x 100 mm Kerb Stone Vol-3 (pg no 74, I No 8.42.1) m 318.15 318.15 100.0 False None None False None False 31815.0 0 3047971 103024 None 081 Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 m2.Vol-3 (pg no 12, I No 13.14) Sqm 88.2 88.2 70.0 False None None False None False 6174.0 0 1710333111000 0 None None Buildings Providing Water Supply works to Sub Regional Science Center 481745.91 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3047972 103025 None 001 Providing and fixing Chorinated poly venyl cloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings,this includes jointing of pipes and fitting with one step CPVC solvent cement,trenching, refilling & testing of joints complete as per direction of Engineer incharge (external work) Item No 13.87.3 (25mm nominal OD pipes) Vol-2 (pg no 122, I No 13.33.3) m 310.8 310.8 180.0 False None None False None False 55944.0 0 3047973 103025 None 002 Providing and fixing Chorinated poly venyl cloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings,this includes jointing of pipes and fitting with one step CPVC solvent cement,trenching,refilling & testing of joints complete as per direction of Engineer incharge (external work) Item No 13.87.5 (40mm nominal OD pipes) Vol-2 (pg no 122, I No 13.33.5) m 500.85 500.85 120.0 False None None False None False 60102.0 0 3047974 103025 None 003 Providing and fixing Chorinated poly venyl cloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings,this includes jointing of pipes and fitting with one step CPVC solvent cement,trenching,refilling & testing of joints complete as per direction of Engineer incharge (external work) Item No 13.33.6 (50mm nominal OD pipes) Vol-2 (pg no 122, I No 13.33.6) m 757.05 757.05 100.0 False None None False None False 75705.0 0 3047975 103025 None 004 Providing and fixing Chorinated poly venyl cloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer incharge. (Concealed work including cutting chases and good the walls etc.,.) Item No 13.86.2 (20mm nominal OD pipes) Vol-2 (pg no 122, I No 13.32.2) m 397.95 397.95 80.0 False None None False None False 31836.0 0 3047976 103025 None 005 Providing and fixing Chorinated poly venyl cloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer incharge. (Concealed work including cutting chases and good the walls etc.,.) Item No 13.86.3 (25mm nominal OD pipes) Vol-2 (pg no 122, I No 13.32.2) m 500.85 500.85 30.0 False None None False None False 15025.5 0 3047977 103025 None 006 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore Vol-2 (pg no 117, I No 13.4.1) Each 576.45 576.45 8.0 False None None False None False 4611.6 0 3047978 103025 None 007 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 40 mm nominal bore Vol-2 (pg no 117, I No 13.4.3) Each 737.1 737.1 2.0 False None None False None False 1474.2 0 3047979 103025 None 008 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore Vol-2 (pg no 117, I No 13.4.4) Each 897.95 897.95 2.0 False None None False None False 1795.9 0 3047980 103025 None 009 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 g. Vol-2 (pg no 119, I No 13.14) No 888.3 888.3 12.0 False None None False None False 10659.6 0 3047981 103025 None 010 Cutting holes up to 15x15cm in R.C.C floors and roofs for passing drain pipe etc., and repairing the hole after insertion of drain pipe etc., with cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including finishing complete so as to make it leak proof Vol-2 (pg no 123, I No 13.37) No 328.65 328.65 100.0 False None None False None False 32865.0 0 3047982 103025 None 011 Cutting holes up to 30x30cm in walls including making good the same with common burnt clay F.P.S (non modular) bricks Vol-2 (pg no 123, I No 13.36) Each 339.15 339.15 80.0 False None None False None False 27132.0 0 3047983 103025 None 012 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 Vol-2 (pg no 119, I No 13.16) No 651.0 651.0 28.0 False None None False None False 18228.0 0 3047984 103025 None 013 Providing and fixing Bidet spray made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class. Vol-2 (pg no 145, I No 14.95a) a. Economy Each 880.95 880.95 8.0 False None None False None False 7047.6 0 3047985 103025 None 014 Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0 cm X 4.0 cm with all fitting arrangements & all necessary accessories omplete Vol-2 (pg no 129, I No 13.63) Unit 256.2 256.2 24.0 False None None False None False 6148.8 0 3047986 103025 None 015 Providing and fixing PTMT grating of approved quality and colour Rectangular type with openable circular lid Vol-2 (pg no 120, I No 13.22.2) No 212.1 212.1 24.0 False None None False None False 5090.4 0 3047987 103025 None 016 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for PVC pipes 75mm dia., 6 kg/sqcm & class 3 Vol-5 (pg no 113, I No 10.1.5) m 231.0 231.0 50.0 False None None False None False 11550.0 0 3047988 103025 None 017 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. PVC pipes 110mm dia., 6 kg/sqcm & class 3 Vol-5 (pg no 113, I No 10.1.7) m 431.55 431.55 80.0 False None None False None False 34524.0 0 3047989 103025 None 018 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring confirming to IS : 5383, leaving 10mm gap for termal expansion (i) single socketed pepes 100mm diameter Vol-2 (pg no 125, I No 13.48) m 305.55 305.55 113.75 False None None False None False 34756.3125 0 3047990 103025 None 019 Providing and placing on terrace, (at all floor levels) polyethylene water storage tanks IS : 12701 marked with cover and suitable locking arrangements, and making necessary holes for inlet, outlet and over flow pipes, but without fittings and the base support for tank Vol-2 (pg no 123, I No 13.34) Ltr 9.45 9.45 5000.0 False None None False None False 47250.0 0 1710333111000 0 None None Buildings Providing Sanitary works to Sub Regional Science Center 774928.38 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3047991 103026 None 001 Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & boning rods at every 100 mm whevere necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenances complete in the following strata All kinds of soils. Depth upto 1.50 m Vol-1 (pg no 10, I No 1.17.1) Cum 275.1 275.1 185.1375 False None None False None False 50931.32625 0 3047992 103026 None 002 Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m. Including cost of all labour complete as per specifications Vol-1 (pg no 7, I No 1.10) Cum 168.0 168.0 155.6625 False None None False None False 26151.3 0 3047993 103026 None 003 Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. Note: Upto 110mm dia Coil shall be used. For Grade PE80 PN8.0 : HDPE Grade PE80-PN8.0,140mm dia Vol-5 (pg no 96, I No 9.2.6) m 934.5 934.5 30.0 False None None False None False 28035.0 0 3047994 103026 None 004 Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. Note: Upto 110mm dia Coil shall be used. For Grade PE80 PN8.0 : HDPE Grade PE80-PN8.0,200mm dia Vol-5 (pg no 96, I No 9.2.9) m 1803.9 1803.9 150.0 False None None False None False 270585.0 0 3047995 103026 None 005 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid Vol-2 (pg no 131, I No 14.3.1) Each 6275.85 6275.85 8.0 False None None False None False 50206.8 0 3047996 103026 None 006 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests Vol-2 (pg no 131, I No 14.1.1) Each 5128.2 5128.2 1.0 False None None False None False 5128.2 0 3047997 103026 None 007 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps Vol-2 (pg no 132, I No 14.7.1) Each 3236.1 3236.1 11.0 False None None False None False 35597.1 0 3047998 103026 None 008 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. Vol-2 (pg no 137, I No 14.40.2) Each 520.8 520.8 5.0 False None None False None False 2604.0 0 3047999 103026 None 009 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 1500x450 mm :Vol-2 (pg no 136, I No 14.32.4) Each 1812.3 1812.3 2.0 False None None False None False 3624.6 0 3048000 103026 None 010 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Vol-2 (pg no 136, I No 14.31) Each 1281.0 1281.0 5.0 False None None False None False 6405.0 0 3048001 103026 None 011 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flushpipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required One urinal basin with 5 litre white P.V.C. automatic flushing cistern:Vol-2 (pg no 123, I No 14.4.1) Each 4676.7 4676.7 5.0 False None None False None False 23383.5 0 3048002 103026 None 012 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover 180 x 150 mm size P type & With Non Modular common burnt clay bricks of designation 3.5 & frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: Vol-2 (pg no 124, I No 13.40) Each 2820.3 2820.3 6.0 False None None False None False 16921.8 0 3048003 103026 None 013 Providing and fixing 100 mm sand cast Iron grating for gully trap Vol-2 (pg no 136, I No 14.29) Each 49.35 49.35 6.0 False None None False None False 296.1 0 3048004 103026 None 014 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.. Vol-5 (pg no 191, I No 16.9) Each 5726.7 5726.7 14.0 False None None False None False 80173.8 0 3048005 103026 None 015 Providing and constructing "WIRE CUT BRICK MACHINEHOLE CHAMBERS" using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15M alround the chamber Construct Brick masonry in CM 1:4, 340 mm thick, with wirecut bricks of approved quality, plaster inside and out side with CM 1:3, 12mm thick, except for the conical surface outside where the plaster thickness shall be 20mm. Slope inside to be 1:6 in the concrete towards central drain and finished smooth. Fixing of pipes in CC 1:2:4 with graded metal of 20mm and down size. Providing and fixing SFRC Machinehole frame and cover (Heavy Duty) conforming to IS:12592 with latest amendment, in CC 1:2:4. Providing and fixing footsteps made of 12mm dia. steel bars (Fe-500) with 3mm thick plastic encapsulation (IS-10910). The footsteps shall be fixed 30cms apart and on CC block embeded to masonry wall. The whole works include watering, curing, barricading, danger lighting, pouring tar over MH frame and cover, cost of tar, shoring, strutting, de-watering, engraving Machinehole number with flow direction on the inner conical surface etc. as per the drawing etc. as per technical specifications and for the following diameters and depth etc. for 1.2mm dia: Constructing Brick Masonry Circular Machinehole 1.2 m internal dia. , 1.5M depth & SFRC cover & frame Vol-5 (pg no 192, I No 16.15.6) Each 40300.05 40300.05 2.0 False None None False None False 80600.1 0 3048006 103026 None 016 Supplying and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fixing the cover in C.C. 1:2:4 and C.M. 1:3 plastering 20 mm thick to all exposed faces, curing for 10 days with all lead and lift with appurtenances. complete Medium Duty Vol-5 (pg no 196, I No 16.23.1) Each 2009.7 2009.7 20.0 False None None False None False 40194.0 0 3048007 103026 None 017 Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work site, rolling and lowering into trenches, laying true to line and level including loading and unloading at both destinations and jointing of pipes and specials, perfect linking of joints with jack to correct position including cost of jointing materials, i.e, rubber rings conforming to IS: 5382 for S&S RCC pipes, with all leads and lifts as directed and giving necessary hydraulic test as per ISS to the required pressure and commissioning etc. complete. (Contractor will make his own arrangements for procuring water for testing). Before the execution of the work, the contractor shall carry out the survey. RCC NP3 Class pipe of 500 mm dia Vol-5 (pg no 188, I No 16.3.6) m 2722.65 2722.65 15.0 False None None False None False 40839.75 0 3048008 103026 None 018 Laying,Lowering and jointing of S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class ,rolling and lowering into trenches, laying true to line and level at both destinations and jointing of pipes and specials, perfect linking of joints with jack to correct position including cost of jointing materials, i.e, rubber rings with all leads and lifts as directed and giving necessary hydraulic test as per ISS to the required pressure and commissioning etc. complete. (Contractor will make his own arrangements for procuring water for testing) 500 mm dia.. Vol-5 (pg no 188, I No 16.4.6) m 375.9 375.9 15.0 False None None False None False 5638.5 0 3048009 103026 None 019 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink without drain board 610x510 mm bowl depth 200 mm Vol-2 (pg no 134 I No 14.10.2.1) Each 3806.25 3806.25 2.0 False None None False None False 7612.5 0 1710333111000 0 None None Buildings Providing Electrification works to Sub Regional Science Center 5038726.89 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3048010 103027 None 001 Open Conduit System Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc. and fixing using inverted wood plugs in case of RCC ceiling and RCC wall / stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700 mm using NF screws. 19/20mm dia 2mm thick m 72.45 72.45 350.0 False None None False None False 25357.5 0 3048011 103027 None 002 Open Conduit System Supplying heavy gauge PVC conduit pipe ………. dia ……… mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc. and fixing using inverted wood plugs in case of RCC ceiling and RCC wall / stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700 mm using NF screws. 25mm dia 2mm thick m 85.05 85.05 900.0 False None None False None False 76545.0 0 3048012 103027 None 003 Open Conduit System Supplying heavy gauge PVC conduit pipe ………. dia ……… mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc. and fixing using inverted wood plugs in case of RCC ceiling and RCC wall / stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700 mm using NF screws. 32mm dia 2.5mm thick m 111.3 111.3 70.0 False None None False None False 7791.0 0 3048013 103027 None 004 Supplying and fixing "S" hook made out of 14mm dia MS rod. No 54.6 54.6 38.0 False None None False None False 2074.8 0 3048014 103027 None 005 Supplying and fixing MS Rafter Clamp set made out of MS Flat and 14mm dia MS rod. No 168.0 168.0 38.0 False None None False None False 6384.0 0 3048015 103027 None 006 Supplying and fixing metal fan box with round hook. No 122.85 122.85 38.0 False None None False None False 4668.3 0 3048016 103027 None 007 Concealed Conduit System Supplying heavy gauge PVC conduit pipe ………. mm dia ………. mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc. and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary. 19/20mm dia 2mm thick Mtr 69.3 69.3 650.0 False None None False None False 45045.0 0 3048017 103027 None 008 Concealed Conduit System Supplying heavy gauge PVC conduit pipe ………. mm dia ………. mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc. and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary. 25mm dia 2mm thick Mtr 81.9 81.9 2100.0 False None None False None False 171990.0 0 3048018 103027 None 009 Concealed Conduit System Supplying heavy gauge PVC conduit pipe ………. mm dia ………. mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc. and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary. 32mm dia 2.5mm thick Mtr 108.15 108.15 75.0 False None None False None False 8111.25 0 3048019 103027 None 010 Supplying heavy gauge PVC conduit pipe ………. dia ……… mm thick with suitable size bends, metal junction boxes, adhesive paste etc. by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18SWG GI fish wire run throughout the conduit wherever necessary. 19/20mm dia 2mm thick Mtr 71.4 71.4 900.0 False None None False None False 64260.0 0 3048020 103027 None 011 Supplying heavy gauge PVC conduit pipe ………. dia ……… mm thick with suitable size bends, metal junction boxes, adhesive paste etc. by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18SWG GI fish wire run throughout the conduit wherever necessary. 25mm dia 2mm thick Mtr 82.95 82.95 2700.0 False None None False None False 223965.0 0 3048021 103027 None 012 Supplying heavy gauge PVC conduit pipe ………. dia ……… mm thick with suitable size bends, metal junction boxes, adhesive paste etc. by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18SWG GI fish wire run throughout the conduit wherever necessary. 32mm dia 2.5mm thick Mtr 103.95 103.95 100.0 False None None False None False 10395.0 0 3048022 103027 None 013 Supplying and fixing PVC/metal conduit deep junction box 19/20mm deep junction box Each 51.45 51.45 300.0 False None None False None False 15435.0 0 3048023 103027 None 014 Supplying and fixing PVC/metal conduit deep junction box 25mm deep junction box Each 58.8 58.8 175.0 False None None False None False 10290.0 0 3048024 103027 None 015 Extra for groove cutting in brick wall/CC floor to the suitable depth for concealing of conduit/GI pipe and plastering, finishing upto wall surface complete. upto 50mm conduit in brick wall Mtr 30.45 30.45 150.0 False None None False None False 4567.5 0 3048025 103027 None 016 Extra for groove cutting in brick wall/CC floor to the suitable depth for concealing of conduit/GI pipe and plastering, finishing upto wall surface complete. upto 50mm conduit CC floor Mtr 72.45 72.45 75.0 False None None False None False 5433.75 0 3048026 103027 None 017 Point wiring using copper wire without switch Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto 3Mtr from tapping point to out let via switch Point 282.45 282.45 29.0 False None None False None False 8191.05 0 3048027 103027 None 018 Point wiring using copper wire without switch Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch Point 397.95 397.95 30.0 False None None False None False 11938.5 0 3048028 103027 None 019 Point wiring using copper wire without switch Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6Mtr upto 10Mtr from tapping point to out let via switch Point 582.75 582.75 30.0 False None None False None False 17482.5 0 3048029 103027 None 020 Point wiring using copper wire without switch Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Two outlet in a row, above 3Mtr upto 6Mtr from tapping point to out let via switches. Point 710.85 710.85 89.0 False None None False None False 63265.65 0 3048030 103027 None 021 Point wiring using copper wire without switch Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Three outlet in a row, above 6Mtr upto 10Mtr from tapping point to out let via switches. Point 1038.45 1038.45 89.0 False None None False None False 92422.05 0 3048031 103027 None 022 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:2010 1.5 sqmm Mtr 27.3 27.3 900.0 False None None False None False 24570.0 0 3048032 103027 None 023 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:2010 2.5 sqmm Mtr 44.1 44.1 5000.0 False None None False None False 220500.0 0 3048033 103027 None 024 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:2010 4 sqmm Mtr 66.15 66.15 5500.0 False None None False None False 363825.0 0 3048034 103027 None 025 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:2010 6 sqmm Mtr 96.6 96.6 75.0 False None None False None False 7245.0 0 3048035 103027 None 026 Supplying and drawing flexible multicore cable manufactured with electrolytic grade flexible copper with low conductor confirming to table 3 class 5 of IS:8130-1984 and (Virgin) PVC insulation and sheathed suitable for working voltage upto 1100V as per IS-694:1990. 2C x 1.5Sq.mm Mtr 55.65 55.65 50.0 False None None False None False 2782.5 0 3048036 103027 None 027 Supplying and drawing flexible multicore cable manufactured with electrolytic grade flexible copper with low conductor confirming to table 3 class 5 of IS:8130-1984 and (Virgin) PVC insulation and sheathed suitable for working voltage upto 1100V as per IS-694:1990. 2C x 2.5Sq.mm Mtr 86.1 86.1 50.0 False None None False None False 4305.0 0 3048037 103027 None 028 Supplying and drawing flexible multicore cable manufactured with electrolytic grade flexible copper with low conductor confirming to table 3 class 5 of IS:8130-1984 and (Virgin) PVC insulation and sheathed suitable for working voltage upto 1100V as per IS-694:1990. 10C x 2.5Sq.mm Mtr 450.45 450.45 50.0 False None None False None False 22522.5 0 3048038 103027 None 029 Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade flexible copper with low resistance conductor confirming to table 3 class 5 of IS:8130-1984 and virgin grade PVC insulation and powder coating extruded PVC sheathed suitable for working voltage upto 1100V as per IS-694:1990. 3C x 2.5Sq.mm Mtr 122.85 122.85 25.0 False None None False None False 3071.25 0 3048039 103027 None 030 Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade flexible copper with low resistance conductor confirming to table 3 class 5 of IS:8130-1984 and virgin grade PVC insulation and powder coating extruded PVC sheathed suitable for working voltage upto 1100V as per IS-694:1990.3C x 4Sq.mm Mtr 176.4 176.4 50.0 False None None False None False 8820.0 0 3048040 103027 None 031 Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade flexible copper with low resistance conductor confirming to table 3 class 5 of IS:8130-1984 and virgin grade PVC insulation and powder coating extruded PVC sheathed suitable for working voltage upto 1100V as per IS-694:1990. 3C x 6Sq.mm Mtr 257.25 257.25 50.0 False None None False None False 12862.5 0 3048041 103027 None 032 Supplying 6A flush type socket and 6 Amps flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3654. 6Amps 2 Way Each 134.4 134.4 15.0 False None None False None False 2016.0 0 3048042 103027 None 033 Supplying and mounting 2 nos. of 2 way 6 amps flush type switches either surface/flush mounted on existing gang box or in 4mm thick plastic sheet and mounted on a flush mounted wooden box and wiring as per IS 1293. Each 178.5 178.5 15.0 False None None False None False 2677.5 0 3048043 103027 None 034 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch Each 342.3 342.3 6.0 False None None False None False 2053.8 0 3048044 103027 None 035 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16 Amps SP switch Each 189.0 189.0 100.0 False None None False None False 18900.0 0 3048045 103027 None 036 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket Each 247.8 247.8 60.0 False None None False None False 14868.0 0 3048046 103027 None 037 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Three way socket Each 179.55 179.55 9.0 False None None False None False 1615.95 0 3048047 103027 None 038 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator. Each 374.85 374.85 38.0 False None None False None False 14244.3 0 3048048 103027 None 039 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in brick/CC wall, including necessary rawl plug, machine/NF screws etc. complete. 1-3 way Each 130.2 130.2 100.0 False None None False None False 13020.0 0 3048049 103027 None 040 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in brick/CC wall, including necessary rawl plug, machine/NF screws etc. complete. 4-5 way Each 143.85 143.85 200.0 False None None False None False 28770.0 0 3048050 103027 None 041 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in brick/CC wall, including necessary rawl plug, machine/NF screws etc. complete. 6 way Each 181.65 181.65 20.0 False None None False None False 3633.0 0 3048051 103027 None 042 Supplying …. way plastic gang box and fixing using necessary wooden/rawl/phill plugs and screws. 1 way gang box No 24.15 24.15 100.0 False None None False None False 2415.0 0 3048052 103027 None 043 Supplying …. way plastic gang box and fixing using necessary wooden/rawl/phill plugs and screws. 2 to 4 way gang box No 33.6 33.6 200.0 False None None False None False 6720.0 0 3048053 103027 None 044 Supplying …. way plastic gang box and fixing using necessary wooden/rawl/phill plugs and screws. 6 to 10 way gang box No 55.65 55.65 100.0 False None None False None False 5565.0 0 3048054 103027 None 045 Supplying and fixing of metal clad industrial plugs and sockets. 2 pole + earth 250V PLUG 16 Amps Each 407.18 407.18 2.0 False None None False None False 814.36 0 3048055 103027 None 046 Supplying and fixing of metal clad industrial plugs and sockets. 2 pole + earth 250V PLUG 32 Amps Each 575.48 575.48 6.0 False None None False None False 3452.88 0 3048056 103027 None 047 Supplying and fixing of metal clad industrial plugs and sockets 3 pole + earth 440V PLUG 16 Amps Each 474.74 474.74 2.0 False None None False None False 949.48 0 3048057 103027 None 048 Supplying and fixing of metal clad industrial plugs and sockets 3 pole + earth 440V PLUG 32 Amps Each 640.35 640.35 2.0 False None None False None False 1280.7 0 3048058 103027 None 049 Supplying and fixing of metal clad industrial plugs and sockets 2 pole + earth 250V SOCKET 16 Amps Each 557.52 557.52 60.0 False None None False None False 33451.2 0 3048059 103027 None 050 Supplying and fixing of metal clad industrial plugs and sockets 2 pole + earth 250V SOCKET 32 Amps Each 700.39 700.39 5.0 False None None False None False 3501.95 0 3048060 103027 None 051 Supplying and fixing of metal clad industrial plugs and sockets 3 pole + earth 440V SOCKET 16 Amps Each 665.47 665.47 2.0 False None None False None False 1330.94 0 3048061 103027 None 052 Supplying and fixing of metal clad industrial plugs and sockets 3 pole + earth 440V SOCKET 32 Amps Each 869.21 869.21 2.0 False None None False None False 1738.42 0 3048062 103027 None 053 Supplying and fixing surface/flush mounting powder coated / galvanised metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / CC wall. 1-3 way Each 166.95 166.95 350.0 False None None False None False 58432.5 0 3048063 103027 None 054 Supplying and fixing surface/flush mounting powder coated / galvanised metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / CC wall. 4-5 way Each 185.85 185.85 200.0 False None None False None False 37170.0 0 3048064 103027 None 055 Supplying and fixing surface/flush mounting powder coated / galvanised metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / CC wall. 6 way Each 231.0 231.0 100.0 False None None False None False 23100.0 0 3048065 103027 None 056 Supplying and fixing surface/flush mounting powder coated / galvanised metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / CC wall. 8 way Each 274.05 274.05 75.0 False None None False None False 20553.75 0 3048066 103027 None 057 Supplying and fixing surface/flush mounting powder coated / galvanised metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / CC wall. 10-12 way Each 334.95 334.95 25.0 False None None False None False 8373.75 0 3048067 103027 None 058 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts, nuts etc. complete on the existing metal / PVC box. 1 to 3 module Each 169.05 169.05 275.0 False None None False None False 46488.75 0 3048068 103027 None 059 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts, nuts etc. complete on the existing metal / PVC box. 4 module Each 183.75 183.75 125.0 False None None False None False 22968.75 0 3048069 103027 None 060 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts, nuts etc. complete on the existing metal / PVC box. 6 module Each 245.7 245.7 75.0 False None None False None False 18427.5 0 3048070 103027 None 061 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts, nuts etc. complete on the existing metal / PVC box. 8 module Each 298.2 298.2 75.0 False None None False None False 22365.0 0 3048071 103027 None 062 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts, nuts etc. complete on the existing metal / PVC box. 10-12 module Each 361.2 361.2 20.0 False None None False None False 7224.0 0 3048072 103027 None 063 Supplying and fixing of modular switch / socket / stepped electronic fan regulator / dimmer / telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293. 6 Amps one way Each 107.1 107.1 250.0 False None None False None False 26775.0 0 3048073 103027 None 064 Supplying and fixing of modular switch / socket / stepped electronic fan regulator / dimmer / telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293. 6 Amps two way Each 174.3 174.3 25.0 False None None False None False 4357.5 0 3048074 103027 None 065 Supplying and fixing of modular switch / socket / stepped electronic fan regulator / dimmer / telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293. 6 Amps 3 way socket Each 179.55 179.55 30.0 False None None False None False 5386.5 0 3048075 103027 None 066 Supplying and fixing of modular switch / socket / stepped electronic fan regulator / dimmer / telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293. Stepped fan regulator Each 374.85 374.85 38.0 False None None False None False 14244.3 0 3048076 103027 None 067 Supplying and fixing of modular switch / socket / stepped electronic fan regulator / dimmer / telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293. 600 watts dimmer Each 289.8 289.8 5.0 False None None False None False 1449.0 0 3048077 103027 None 068 Supplying and fixing of modular switch / socket / stepped electronic fan regulator / dimmer / telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293. 1000-1200 watts dimmer Each 345.45 345.45 5.0 False None None False None False 1727.25 0 3048078 103027 None 069 Supplying and fixing of modular switch / socket / stepped electronic fan regulator / dimmer / telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293. 16 Amps one way switch Each 189.0 189.0 60.0 False None None False None False 11340.0 0 3048079 103027 None 070 Supplying and fixing of modular switch / socket / stepped electronic fan regulator / dimmer / telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293. 6 Amps bell push Each 185.85 185.85 5.0 False None None False None False 929.25 0 3048080 103027 None 071 Supplying and fixing of modular switch / socket / stepped electronic fan regulator / dimmer / telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293. 32 Amps DP switch Each 342.3 342.3 8.0 False None None False None False 2738.4 0 3048081 103027 None 072 Supplying and fixing of modular switch / socket / stepped electronic fan regulator / dimmer / telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293. 6/16 Amps universal socket Each 247.8 247.8 60.0 False None None False None False 14868.0 0 3048082 103027 None 073 Supplying and fixing of modular switch / socket / stepped electronic fan regulator / dimmer / telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293. TV/Telephone socket Each 163.8 163.8 25.0 False None None False None False 4095.0 0 3048083 103027 None 074 Supplying and fixing of modular switch / socket / stepped electronic fan regulator / dimmer / telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293. RJ45/I.O outlet Each 353.85 353.85 50.0 False None None False None False 17692.5 0 3048084 103027 None 075 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' type curve, indicator ON / OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC-60898. 6-32 Amps SP Each 435.75 435.75 27.0 False None None False None False 11765.25 0 3048085 103027 None 076 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' type curve, indicator ON / OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC-60898. 40 Amps SP Each 832.65 832.65 16.0 False None None False None False 13322.4 0 3048086 103027 None 077 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' type curve, indicator ON / OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC-60898. 6-32 Amps DP Each 1113.0 1113.0 35.0 False None None False None False 38955.0 0 3048087 103027 None 078 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' type curve, indicator ON / OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC-60898. 6-32 Amps TPN Each 1802.85 1802.85 40.0 False None None False None False 72114.0 0 3048088 103027 None 079 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' type curve, indicator ON / OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC-60898. 50-63 Amps TPN Each 3242.4 3242.4 35.0 False None None False None False 113484.0 0 3048089 103027 None 080 Supplying and fixing of regular MCB distribution boards on wall/wood board/flush mounting using required clamps, bolts, nuts etc. with provision for fixing suitable type capacity MCB's single phase / 3phase / single door with powder coated painting. Made out of 14 SWG MS enclosure. I-Single Door 4way SP & N Each 1303.05 1303.05 2.0 False None None False None False 2606.1 0 3048090 103027 None 081 Supplying and fixing of regular MCB distribution boards on wall/wood board/flush mounting using required clamps, bolts, nuts etc. with provision for fixing suitable type capacity MCB's single phase / 3phase / single door with powder coated painting. Made out of 14 SWG MS enclosure. II-Double Door 8way SP & N Each 1946.7 1946.7 1.0 False None None False None False 1946.7 0 3048091 103027 None 082 Supplying and fixing of regular MCB distribution boards on wall/wood board/flush mounting using required clamps, bolts, nuts etc. with provision for fixing suitable type capacity MCB's single phase / 3phase / single door with powder coated painting. Made out of 14 SWG MS enclosure. III-Double Door 4way TP & N Each 4239.9 4239.9 4.0 False None None False None False 16959.6 0 3048092 103027 None 083 Supplying and fixing of regular MCB distribution boards on wall/wood board/flush mounting using required clamps, bolts, nuts etc. with provision for fixing suitable type capacity MCB's single phase / 3phase / single door with powder coated painting. Made out of 14 SWG MS enclosure. III-Double Door 6way TP & N Each 5187.0 5187.0 2.0 False None None False None False 10374.0 0 3048093 103027 None 084 Supplying, fixing and wiring Residual current Circuit Breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/panel board. 16-25 Amps 2pole Each 4490.85 4490.85 35.0 False None None False None False 157179.75 0 3048094 103027 None 085 Supplying, fixing and wiring Residual current Circuit Breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/panel board. 32-40 Amps 2pole Each 4786.95 4786.95 22.0 False None None False None False 105312.9 0 3048095 103027 None 086 Supplying, fixing and wiring Residual current Circuit Breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/panel board. 32-40 Amps 4pole Each 5404.35 5404.35 25.0 False None None False None False 135108.75 0 3048096 103027 None 087 Supplying, fixing and wiring Residual current Circuit Breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/panel board. 63 Amps 4pole Each 5822.25 5822.25 25.0 False None None False None False 145556.25 0 3048097 103027 None 088 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5mtr. Long buried in a pit ……. The pit should be filled with equal proportion of salt and charcoal 150mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc. is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and check nuts etc. The pipe shall have 16 through holes of 122mm dia. No 3685.5 3685.5 4.0 False None None False None False 14742.0 0 3048098 103027 None 089 Supplying, fixing and wiring earth electrode for grounding of lifts, Transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts. No 4468.8 4468.8 4.0 False None None False None False 17875.2 0 3048099 103027 None 090 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. GI strip 25x3mm Mtr 86.1 86.1 250.0 False None None False None False 21525.0 0 3048100 103027 None 091 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. GI strip 25x6mm Mtr 134.4 134.4 200.0 False None None False None False 26880.0 0 3048101 103027 None 092 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. GI strip 40x6mm Mtr 190.05 190.05 30.0 False None None False None False 5701.5 0 3048102 103027 None 093 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. GI strip 50x6mm Mtr 228.9 228.9 40.0 False None None False None False 9156.0 0 3048103 103027 None 094 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. GI strip 600x600x3mm GI plate Each 918.75 918.75 17.0 False None None False None False 15618.75 0 3048104 103027 None 095 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm copper strip 25x6mm Mtr 598.5 598.5 25.0 False None None False None False 14962.5 0 3048105 103027 None 096 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm copper strip40x6mm Mtr 1155.0 1155.0 70.0 False None None False None False 80850.0 0 3048106 103027 None 097 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 600x600x3mm CU plate Each 7792.05 7792.05 4.0 False None None False None False 31168.2 0 3048107 103027 None 098 Supplying of 1.1 kV LT UG cable having aluminium conductor PVC insulated, extruded inner sheathed, galvanised steel strip (except 2Cx10sqmm wire armoured) confirming to IS 3975;1990 (no. of strip indicated in GTP) and extruded PVC outer sheathed armoured cable with specified IS-1554 Part-1:1988 and confirming to GTP of Group-A. 4 core 16sq.mm Mtr 148.93 148.93 350.0 False None None False None False 52125.5 0 3048108 103027 None 099 Supplying of 1.1 kV LT UG cable having aluminium conductor PVC insulated, extruded inner sheathed, galvanised steel strip (except 2Cx10sqmm wire armoured) confirming to IS 3975;1990 (no. of strip indicated in GTP) and extruded PVC outer sheathed armoured cable with specified IS-1554 Part-1:1988 and confirming to GTP of Group-A. 3.5 core 25sq.mm Mtr 146.53 146.53 15.0 False None None False None False 2197.95 0 3048109 103027 None 100 Supplying of 1.1 kV LT UG cable having aluminium conductor PVC insulated, extruded inner sheathed, galvanised steel strip (except 2Cx10sqmm wire armoured) confirming to IS 3975;1990 (no. of strip indicated in GTP) and extruded PVC outer sheathed armoured cable with specified IS-1554 Part-1:1988 and confirming to GTP of Group-A. 3.5 core 70sq.mm Mtr 333.81 333.81 25.0 False None None False None False 8345.25 0 3048110 103027 None 101 Supplying of 1.1 kV LT UG cable having aluminium conductor PVC insulated, extruded inner sheathed, galvanised steel strip (except 2Cx10sqmm wire armoured) confirming to IS 3975;1990 (no. of strip indicated in GTP) and extruded PVC outer sheathed armoured cable with specified IS-1554 Part-1:1988 and confirming to GTP of Group-A. 3.5 core 400sq.mm Mtr 1526.14 1526.14 350.0 False None None False None False 534149.0 0 3048111 103027 None 102 Supplying and fixing 2mm thick perforated cable tray with powder coated paint on existing MS angle support using necessary GI bolts / nuts and washer or welding as required. 150 x 50mm Mtr 486.15 486.15 150.0 False None None False None False 72922.5 0 3048112 103027 None 103 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes; 16sqmm Each 13.06 13.06 16.0 False None None False None False 208.96 0 3048113 103027 None 104 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes; 25sqmm long barrel Each 28.35 28.35 2.0 False None None False None False 56.7 0 3048114 103027 None 105 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes; 70sqmm long barrel Each 93.45 93.45 2.0 False None None False None False 186.9 0 3048115 103027 None 106 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes; 400sqmm long barrel Each 906.15 906.15 6.0 False None None False None False 5436.9 0 3048116 103027 None 107 Supplying exhaust fan of 1440 rpm of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC supply. Each 1566.6 1566.6 2.0 False None None False None False 3133.2 0 3048117 103027 None 108 Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS374 / 79 and also comply with IS1709 / 1984 with latest amendment, Rated voltage 220 V / 50 Hz Rated power input 48 W 10 Rated current As per IS374 / 79, Rated power factor 0.9 lagging (min), Rated speed 350 RPM, Rated air delivery 210 10 Cubic Meter Minimum, Rated service value 4.2 CMM / Watt, Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201, as per IS specification, Motor wdg. Temp rise Shall not exceed 75 deg C over and ambient of 400C by resistance method at 245 Volts, Insulation resistance Shall not be less than Two Mega Ohms (2 M Ohms) Leakage current Should not exceed 210 Micro Amp, Power input, watt& current, Air Delivery & Fan Speed as per IS:374 / 1979 with latest amendment, 2 year manufacturer Warranty. 48 sweep 5 Star (1200mm) Each 2810.85 2810.85 38.0 False None None False None False 106812.3 0 3048118 103027 None 109 Supplying 1.5 Ton capacityTR split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 V with hermetically sealed compressor with air cooled condenser, motor capacitor and start run capacitors, relay and over load protector internal unit, with one indoor and one outdoor unit The condenser unit will be placed outside the room on the terrace to avoid noise including standard length of suitable size copper tubing covered with insulation tube. (High wall chorded/cordless) suitable capacity 3 core sheathed/ PVC copper cable and a battery operated wireless remote unit Each 50067.15 50067.15 2.0 False None None False None False 100134.3 0 3048119 103027 None 110 Supply erection, testing, commissioning of Cassette type split Air conditioners suitable for operation on single/three phase AC supply, hermetically sealed compressor with air cooled condenser motor capacitor start, capacitors run relay and over load protection, one ceiling mounted indoor unit and one outdoor condenser unit including standard accessories covered with insulation tube including battery operated cordless unit 3.0 TR Cassette 3 Ph Each 110372.85 110372.85 6.0 False None None False None False 662237.1 0 3048120 103027 None 111 Installation charges for split type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable Angle Iron support upto 3.0 Ton split/cassette type A/C. Each 3333.75 3333.75 8.0 False None None False None False 26670.0 0 3048121 103027 None 112 Extra for Fabrication supply and fixing of Stand fabricated using slotted angle /L angle of size 6mm x 50mm for mounting out door/indoor A.C. unit/ Batteries Each 5047.35 5047.35 2.0 False None None False None False 10094.7 0 3048122 103027 None 113 Supplying of feet - PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70 lumen maintenance with CRI 80. Power Input: 220-240V 50/60Hz Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fighting 1 x 2- 9/10w Each 578.55 578.55 12.0 False None None False None False 6942.6 0 3048123 103027 None 114 Supplying of feet - PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fighting 1 x4 20/22 w Each 724.5 724.5 2.0 False None None False None False 1449.0 0 3048124 103027 None 115 down light W luminaire comprising of pressure decast extruded aluminium housing, with spring loaded false ceiling clamps LED of Power COB with CCT 6500 degree KCRI70 efficacy 100 lumen per watt 120degree beam spread life25000 burning hours and Compliance to IS 10322/IEC 60598 LM 79 & LM 80 The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level LEDs are driven by HF electronic driver integrated in a separate control gear assembly with PF 0.95 power loss should 5 of lamp wattage short circuit & open circuit protection to be integrated in the circuit THD less than 20 Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition Each 845.25 845.25 8.0 False None None False None False 6762.0 0 3048125 103027 None 116 Supply of round/square recess/surface mounted rolling type LED Down light with W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70 lumen maintenance with CRI 80. Power Input220-240V 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED square or round down light 10-12W Each 929.25 929.25 137.0 False None None False None False 127307.25 0 3048126 103027 None 117 Supply of round/square recess/surface mounted rolling type LED Down light with W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring with Life of 25000 burning hours & 70 lumen maintenance with CRI 80. Power Input220-240V 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED square or round down light 15 18W No 1390.2 1390.2 36.0 False None None False None False 50047.2 0 3048127 103027 None 118 Supplying of recess mounting non integral type LED W luminaire comprising of pressure decast / extruded aluminium housing, with spring loaded fase ceiling clamps. Power LEDs with CCT 6500 degree K,CRI 70%. efficacy 100 lumen per watt, 120degree beam spread life 25000 burning hours and Compliance to IS 10322/IEC 60598 LM 79 & LM 80 The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF 0.95, power loss should 5% of lamp wattage short circuit & open circuit protection to be integrated in the circuit. THD less than 20% Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/ CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. LED modular down light 1'x1' 18W No 3294.9 3294.9 5.0 False None None False None False 16474.5 0 3048128 103027 None 119 Supplying of recess mounting non integral type LED W luminaire comprising of pressure decast / extruded aluminium housing, with spring loaded fase ceiling clamps. Power LEDs with CCT 6500 degree K CRI70%. efficacy 100 lumen per watt 120degree beam spread life25000 burning hours and Compliance to IS 10322/IEC 60598 LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LEDs are driven by HF electronic driver integrated in a separate control gear assembly with PF 0.95 power loss should 5 of lamp wattage., short circuit & open circuit protection to be integrated in the circuit. THD less than 20 Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/ CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition LED modular down light 2x2 36watt No 4780.65 4780.65 5.0 False None None False None False 23903.25 0 3048129 103027 None 120 Supply of LED pole mounting type post top lantern with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/ clear glass material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection Min 5KV along with Over voltage/Overload short circuit/ miss-wiring protection Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598 LM 79 & LM 80 Adherence with RoHS UL approved MCPCB. LED Efficiency 130lm/w nominal CRI 75. Luminaire manufacturer should have inhouse facility accredited by NABL / CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing / Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree / Nichia / Lumileds / Osram make LED Source. LED Post Top Lantern with 35/40 Watts No 10103.1 10103.1 4.0 False None None False None False 40412.4 0 3048130 103027 None 121 Supplying and fixing one of 230Volts ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws. Each 258.3 258.3 2.0 False None None False None False 516.6 0 3048131 103027 None 122 Fixing all types and all capacities of fluorescent / false ceiling/ spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076 twin twisted PVC insulated wires, required nos. of round blocks and clamps. On wall / ceiling / rafter / giders Each 128.1 128.1 225.0 False None None False None False 28822.5 0 3048132 103027 None 123 Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts 5 Amps Ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire. Each 516.6 516.6 3.0 False None None False None False 1549.8 0 3048133 103027 None 124 Fixing a ceiling / wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing 5 Amps. Ceiling rose, necessary length of 23/0.0076 inch PVC insulated twin twisted copper wire and wiring. Each 179.55 179.55 38.0 False None None False None False 6822.9 0 1710333111000 0 None None Buildings Drilling of Borewell Near Sub Regional Science Center 341430.6 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3048134 103028 None 001 Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner or Schlumbergers’s method, including reconnaissance survey of geological formation. Geophysical investigation of existing ground water in the vicinity, its quality, quantity and acceptability of the users, indicating the location of the site, r commended depth of casing pipe required to seal the top unconsolidated formation including an extra depth of 1.0 metre in consolidated formation for proper seating of casing pipe, depth of drilling required to cover full depth of aquifer proposed to be tapped, probable yield and other information required including transportation of instruments and accessories to work site, engaging technical personal and labour required etc. NOTE: 1) Additional rate on item 1&2 is allowed fo drilling in over burden and fixing Casing pipes beyond 20 M (for fixing Casing pipes only) a) Above 20 M and upto 30 M - 15%, b) Above 30 M - 30% (Measurement of overburden is restricted to the depth of casing pipe fixed excluding initial depth of 20M and projection above ground level). 2) A sum of Rs. 100/- is to be deducted for Dry Borewell towards yield test Each 5552.4 5552.4 1.0 False None None False None False 5552.4 0 3048135 103028 None 002 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) a) 0-50 Mtrs. Rmtr 388.5 388.5 50.0 False None None False None False 19425.0 0 3048136 103028 None 003 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) b) 50-100Mtrs Rmtr 487.2 487.2 50.0 False None None False None False 24360.0 0 3048137 103028 None 004 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) c) 100-150 Mtrs. Rmtr 517.65 517.65 10.0 False None None False None False 5176.5 0 3048138 103028 None 005 Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, material and conforming to IS 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both ends.threaded conforming to IS 554-1985 one end fixed with socket conforming to IS 4270-2001 and the other end with screwed pipes all shall be responsibaly free from defects. The tubes shall be responsible straight end should be with ISI marking weighing 25.10kg/m.prices include Collar-Medium duty. Rmtr 2029.65 2029.65 60.0 False None None False None False 121779.0 0 3048139 103028 None 006 Supply and delivery at site 50mm(2”) dia heavy duty unplasticized PVC Column pipes with heavy duty collars,rubber profile ring,vibration control profile ring,freezing and turbulence free leak proof EPDM ring with ISI mark with its latest amendments m 577.5 577.5 110.0 False None None False None False 63525.0 0 3048140 103028 None 007 Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per necessary ammendments and instructions of engineer incharge of work. For 7.50 HP - 90 LPM @ 165 m = 15 STG Outlet Dia - 2.00” Each 42850.5 42850.5 1.0 False None None False None False 42850.5 0 3048141 103028 None 008 Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work. Each 6825.0 6825.0 1.0 False None None False None False 6825.0 0 3048142 103028 None 009 Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments No 157.5 157.5 1.0 False None None False None False 157.5 0 3048143 103028 None 010 Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments including cost of material and labour charges for fixing, if any etc. complete with all lead and lifts and as directed by the Engineer in charge No 172.2 172.2 1.0 False None None False None False 172.2 0 3048144 103028 None 011 Supply and delivery at site 50mm(2”) dia heavy duty CI adopter set complete suitable for uPVC Column pipes for Submersible pumpsets Set 1627.5 1627.5 1.0 False None None False None False 1627.5 0 3048145 103028 None 012 Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to13:8130-1984 and virgin grade PVC insulation and powder coating extruded PVC sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990. 3C X 6Sq.mm m 257.25 257.25 110.0 False None None False None False 28297.5 0 3048146 103028 None 013 Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor type NOTE: 1) DOL- Direct Online Starter 2) S-D- Star Delta Starter etc. complete. for outdoor 6 to 15 HP pumps Each 18375.0 18375.0 1.0 False None None False None False 18375.0 0 3048147 103028 None 014 Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipments including providing cement concrete foundation bed etc., complete as per specification, with testing of as per instructions of engineer incharge of work Job 1522.5 1522.5 1.0 False None None False None False 1522.5 0 3048148 103028 None 015 Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/25/40 Amps with scalable box. Per 3 Poles 1207.5 1207.5 1.0 False None None False None False 1207.5 0 3048149 103028 None 016 Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at the location of respective pump sets. Kvar 577.5 577.5 1.0 False None None False None False 577.5 0 1710333111000 0 None None Buildings Construction of UG Sump Near Sub Regional Science Center 261303.75 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3048150 103029 None 001 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3m Vol-1 (pg no 8, I No 1.14.1) a) in all types of soils 70% of qty Cum 107.1 107.1 32.11 False None None False None False 3438.981 0 3048151 103029 None 002 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work ordinary rock/Soft rock / with out blasting upto 1.5m depth Vol-1 (pg no 8, I No 1.15.1) b) Soft rock /ordinary rock(with out blasting) 30% of qty Cum 381.15 381.15 3.567 False None None False None False 1359.56205 0 3048152 103029 None 003 Providing and laying in position Cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates Vol-1 (pg no 15, I No 2.1.3) Cum 6288.45 6288.45 3.21 False None None False None False 20185.9245 0 3048153 103029 None 004 Providing and laying in position Cement concrete for all Foundation works. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates including Additional for formwork, Centering & Scaffolding for Sl No 1 a: Foundation upto plinth Isolated As per Addendum-I in Volume-1 of page No.-111 (@8% of Finished Rate) Vol-1 (pg no 15, I No 2.2.3) Cum 7185.02 7185.02 6.0 False None None False None False 43110.12 0 3048154 103029 None 005 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates including Additional for formwork, Centering & Scaffolding for Sl No 11: Earth retaining structures As per Addendum-I in Volume-1 of page No.-112 (@10% of Finished Rate) Vol-1 (pg no 16, I No 2.4.3) Cum 7318.08 7318.08 5.24 False None None False None False 38346.7392 0 3048155 103029 None 006 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Vol-1 (pg no 7, I No 1.9) Cum 279.3 279.3 11.74 False None None False None False 3278.982 0 3048156 103029 None 007 Providing and laying in position Cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. including Additional for formwork, Centering & Scaffolding for Sl No 15 : Roof slab of Buildings As per Addendum-I in Volume-1 of page No.-112 (@50% of Finished Rate) Ground Floor Vol-1 (pg no 16, I No 2.5.2) Cum 10777.72 10777.72 1.39 False None None False None False 14981.0308 0 3048157 103029 None 008 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification a. Buildings Vol-1 (pg no 18, I No 2.11(a)) t 93929.85 93929.85 0.97 False None None False None False 91111.9545 0 3048158 103029 None 009 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement:4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Vol-2 (pg no 41, I No 8.1.1) Sqm 267.75 267.75 30.88 False None None False None False 8268.12 0 3048159 103029 None 010 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. Vol-2 (pg no 42, I No 8.8) Sqm 389.55 389.55 24.74 False None None False None False 9637.467 0 3048160 103029 None 011 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineerin- Charge. Vol-2 (pg no 43, I No 8.12) Kg 67.2 67.2 55.62 False None None False None False 3737.664 0 3048161 103029 None 012 Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Vol-2 (pg no 45, I No 8.28) Sqm 93.45 93.45 6.76 False None None False None False 631.722 0 3048162 103029 None 013 Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments. 2 HP, Size 65x50 Head 13M, Discharge 462 LPM Vol-5 (pg no 157, I No 13.40.1) Each 16390.5 16390.5 1.0 False None None False None False 16390.5 0 3048163 103029 None 014 Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work. Vol-5 (pg no 156, I No 13.32) Job 6825.0 6825.0 1.0 False None None False None False 6825.0 0 1710333111000 0 None None Buildings Construction of STP near Sub Regional Science Center 1359750.0 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3048164 103030 None 001 Waste water Treatment by Bio Sewage Treatment Plant (Bio STP) onsite construction [25 KLD ]: Providing, installation and commissioning of 25 KLD anaerobic Bio Sewage Treatment Plant (Bio STP) for black water with all necessary accessories such as pre- filter, pipes for the onsite constructed ABD tank as per the prescribed specification, according to the capacity, with a baffle wall to control the flow of water and to increase the retention time in the RCC ABD Tank. It includes an internal matrix for enhanced growth of bacteria, rising and falling pipes. For grey water, pre - filter, oil skimmer is provided along with an aerator. Post filter such as sand and carbon filter are also included as per the enclosed detailed technical specification attached as Annexure-2, including cost of material, loading and unloading and as directed by the engineer in charge etc., complete, including annual maintenance of the system for 5 years. Vol-5 (pg no 251, I No 22.2.1) Each 1359750.0 1359750.0 1.0 False None None False None False 1359750.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1710333112000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1710333112000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1710333112000 1 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1710334132000 0 None None ELIGIBILITY The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end. None 1710334135000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1710334138000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1710334142000 0 None None ELIGIBILITY Conditional tenders will not be accepted. None 1710334145000 0 None None ELIGIBILITY Tenderers are required to read the Bid Documents carefully before submission of their bid. None 1710334148000 0 None None ELIGIBILITY Any discrepancies observed in the documents uploaded by the tenderer the tender shall liable to rejected. None 1710334153000 0 None None ELIGIBILITY Royalty on construction materials and other taxes will be deducted as per prevailing Govt., orders as may be modified from time to time. None 1710334157000 0 None None ELIGIBILITY As per Karnataka State Government order No.LD/300/LET/2006 Bangalore Dated 01.01.2007 and Government Letter No.PW/134/BMS/2007 Dated 27-07-2007, a sum amounting to 1% of the bill amount will be deducted towards Construction Labour Welfare fund. None 1710334160000 0 None None ELIGIBILITY The Tenderer shall scan Original Workdone certificates / Turnover Statements and any other documents specified by the employer and attach the scanned file to the Bid. The Original Documents shall be produced for physical verification within one week from the date of Technical bid opening. None 1710334165000 0 None None ELIGIBILITY The Employer reserves the right to reject any or all Tenders without assigning any reason or what so ever. None 1710334169000 0 None None ELIGIBILITY The scanned copy of the Bank Guarantee or Fixed Deposit Receipts shall be uploaded in the e-procurement portal at the time of submission of bid and the originals of the same shall be submitted on or before technical bid opening date at the place of tender opening. None 1710334172000 0 None None ELIGIBILITY Financial turnover of previous years shall be given a weight age of 10% per year to bring them to the price level of the 2023-24. None 1710334190000 0 None None ELIGIBILITY The Bidder should Inspect the Site Before Submitting Tender and site visited Certificate is duly signed by the Executive Engineer, DUDC, Belagavi is to be uploaded. None 1710334196000 0 None None ELIGIBILITY All other terms & conditions as per the Tender Document. None 1710423913000 0 None None ELIGIBILITY Bidder has to quote the Rates excluding GST. GST will be paid separately as per applicable. None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Tenderer in his name should have in the last five years i.e., 2018-19 to 2022-23, satisfactorily completed, at least one similar Building Work of Value not less than Rs.350.00 Lakhs as Prime Contractor. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None The tenderer should have executed the following minimum quantities of work in any one year of last five years, i.e. 2018 to 2022-23: 1)Earthwork/Embankment-2733.00 Cum, 2)Cement Concrete (Plain and Reinforced)-1177.00 Cum, 3)Steel Reinforcement/ Fabrication Work/ Structural Steel-97.00 Tonne, 4)Stone / Brick Masonry-320.00 Cum, 5)Plastering/Painting-9179.00 Sqm & 6) Flooring-2326.00 Sqm Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Class-1 Contractor Registration Certificate. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None PWD Registration Certificate (Class I/II/III/IV) None None None None Owning the following key and critical equipment for this work 1)Excavator-01 No, 2)Tippers -02 Nos & 3)Self Loading Concrete mixer-02 Nos OR Concrete Batching Plant -01 No. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Invoices for equipments and Regestration certificate for vehicles and lease agreements from owners. None None None None Tenderer in his name should have in the last five years i.e., 2018-19 to 2022-23, achieved in at least two financial years a minimum annual financial turnover (in all classes of civil engineering construction works only) of Rs.1400.00 lakhs (UDIN number is mandatory) Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Liquid assets and /or availability of credit facilities of no less than Rs.210.00 Lakhs (estimated cash flow for 3 months of peak construction period) (Format as per Bid document) Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit None None None None Assessed available tender capacity Others Assessed available tender capacity createdTs version createdDate modifiedDate documentName None None None None Others -- As per Tender document None None None None List of existing commitments and ongoing works Others List of existing commitments and ongoing works createdTs version createdDate modifiedDate documentName None None None None Others -- As per Tender document None None None None List of works for which tenders already submitted Others List of works for which tenders already submitted createdTs version createdDate modifiedDate documentName None None None None Others -- As per Tender document None None None None Deleted Others Other createdTs version createdDate modifiedDate documentName None None None None Others -- Other None None None None Deleted Others Other createdTs version createdDate modifiedDate documentName None None None None Others -- Other None None None None Deleted Others Other createdTs version createdDate modifiedDate documentName None None None None Others -- Other None None None None Deleted Others Other createdTs version createdDate modifiedDate documentName None None None None Others -- Other None None None None Deleted Others Other createdTs version createdDate modifiedDate documentName None None None None Others -- Other None None None None Deleted Others Other createdTs version createdDate modifiedDate documentName None None None None Others -- Other
tenderCriterionDocumentList	documentName optional documentTypeText Annual Turnover Certificate True Technical Bid Contractor Registration Certificate True Technical Bid Similar Work done Certificate True Technical Bid Minimum quantities work done True Technical Bid Liquid assets and/or availability of credit facilities-Banker Certificate True Technical Bid Key / Critical Equipment True Technical Bid Assessed available tender capacity True Technical Bid List of existing commitments and ongoing works True Technical Bid List of works for which tenders already submitted True Technical Bid Section-3 Qualification information forms True Technical Bid Site visited Certificate duly signed by the Executive Engineer, DUDC, Belagavi True Technical Bid
tenderWorkLocationList
tenderAddress	createdTs 1710424136000 version 0 createdDate None modifiedDate None blockNumber DUDC, DC Office, Court Compound street None city Belagavi state Karnataka pin 590001
tenderRecallDTO	None