| 3068522 | 104604 | None | HBHalli 001 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m as per drawing and technical specifications including setting out shoring strutting barricading caution lights including dressing of excavated surfaces disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour tools usage of machinery & other appurtenaces required to complete the work PWD CSR 2023-24 Vol-I P. No. 8 I. No. 1.14.1 | Cum | 107.1 | 107.1 | 18.44 | False | None | None | False | None | False | 1974.924 | 0 |
| 3068523 | 104604 | None | HBHalli 002 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed laid in layers not exceeding 150 mm thickness well compacted using plate vibrators including all lead & lifts cost of all materials of quality labour Usage charges of machinery curing and all the other appurtenances required to complete the work as per technical specifications - Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates PWD CSR 2023-24 Vol-I P. No. 15 I. No. 2.1.2 | Cum | 5947.2 | 5947.2 | 1.99 | False | None | None | False | None | False | 11834.928 | 0 |
| 3068524 | 104604 | None | HBHalli 003 | Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) PWD CSR 2023-24 Vol-II P. No. 9 I. No. 5.2) | Cum | 6948.0 | 6948.0 | 7.46 | False | None | None | False | None | False | 51832.08 | 0 |
| 3068525 | 104604 | None | HBHalli 004 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)(1 cement : 6 coarse sand) PWD CSR 2023-24 Vol-II P. No. 9 I. No. 5.4) | Cum | 6708.45 | 6708.45 | 8.39 | False | None | None | False | None | False | 56283.8955 | 0 |
| 3068526 | 104604 | None | HBHalli 005 | Filling approved earth (excluding rock) in trenches plinth sides of foundations and other similar works etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering lead up to 50 m and lift upto 1.5 m. PWD CSR 2023-24 Vol-I P. No. 7 I. No. 1.1 | Cum | 454.65 | 454.65 | 11.38 | False | None | None | False | None | False | 5173.917 | 0 |
| 3068527 | 104604 | None | HBHalli 006 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers well compacted using needle vibrators including all lead & lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all the other appurtenances required to complete the work as per technical specifications - M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PWD CSR 2023-24 Vol-I P. No. 15 I. No. 2.2.1 | Cum | 7104.3 | 7104.3 | 0.65 | False | None | None | False | None | False | 4617.795 | 0 |
| 3068528 | 104604 | None | HBHalli 007 | Providing and laying in position Cement Concrete for all Sub structures of building Irrigation works Sub structure works of bridges Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators providing weep holes wherever necessary including all lead & lifts cost of all materials of quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications - M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PWD CSR 2023-24 Vol-I P. No. 16 I. No. 2.4.2 | Cum | 9958.7 | 9958.7 | 3.43 | False | None | None | False | None | False | 34158.341 | 0 |
| 3068529 | 104604 | None | HBHalli 008 | Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works & super structure works of bridges upto 3.50 m height.The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead & lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications - M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PWD CSR 2023-24 Vol-I P. No. 16 I. No. 2.5.1 | Cum | 11138.0 | 11138.0 | 0.98 | False | None | None | False | None | False | 10915.24 | 0 |
| 3068530 | 104604 | None | HBHalli 009 | Providing and laying in position Cement Concrete for all Super structures of building Road works Water works Irrigation works & super structure works of bridges upto 3.50 m height.The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators. The cost includes all lead & lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications - M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PWD CSR 2023-24 Vol-I P. No. 16 I. No. 2.5.1 | Cum | 10442.25 | 10442.25 | 2.89 | False | None | None | False | None | False | 30178.1025 | 0 |
| 3068531 | 104604 | None | HBHalli 010 | Supplying fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials machinery labour cleaning straightening cutting bending hooking laping/ welding joints tying with binding wire /soft annealed steel wire and other ancilary operations complete as per drawing and technical specification - For Buildings PWD CSR 2023-24 Vol-I P. No. 18 I. No. 2.11a) | Tonne | 93929.85 | 93929.85 | 0.77 | False | None | None | False | None | False | 72325.9845 | 0 |
| 3068532 | 104604 | None | HBHalli 011 | Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials labour scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.PWD Common DSR 2023-24 Volume 2 I No 6.8 P.No 14 | Cum | 8367.0 | 8367.0 | 9.46 | False | None | None | False | None | False | 79151.82 | 0 |
| 3068533 | 104604 | None | HBHalli 012 | Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 (1 cement :3 coarse sand) including cost of all materials labour scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work..PWD Common DSR 2023-24 Volume 2 I No 6.14 P.No 16). | Sqm | 1113.0 | 1113.0 | 23.07 | False | None | None | False | None | False | 25676.91 | 0 |
| 3068534 | 104604 | None | HBHalli 013 | Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materials labour curing complete as per specifications and as per directions of Engineer-in-charge.PWD CSR 2023-24 Vol-II P. No. 41 I. No. 8.4.2 | Sqm | 327.6 | 327.6 | 91.75 | False | None | None | False | None | False | 30057.3 | 0 |
| 3068535 | 104604 | None | HBHalli 014 | Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materials labour curing complete as per specifications and as per directions of Engineer-in-charge PWD CSR 2023-24 Vol-II P. No. 42 I. No. 8.7 | Sqm | 384.3 | 384.3 | 68.18 | False | None | None | False | None | False | 26201.574 | 0 |
| 3068536 | 104604 | None | HBHalli 015 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade after thoroughly brooming the surface to remove all dirt dust mortar drops and foreign matter including preparing the surface even and sand paper smooth cost of materials labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life) PWD CSR 2023-24 Vol-II P. No. 46 I. No. 8.33.1 | Sqm | 165.9 | 165.9 | 159.93 | False | None | None | False | None | False | 26532.387 | 0 |
| 3068537 | 104604 | None | HBHalli 016 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours shades except burgundy bottle green black of any size as approved by Engineer-in-Charge in skirting risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2 including pointing in white cement mixed with pigment of matching shade complete. PWD CSR 2023-24 Vol-II P. No. 60 I. No. 9.10 | Sqm | 1161.3 | 1161.3 | 19.11 | False | None | None | False | None | False | 22192.443 | 0 |
| 3068538 | 104604 | None | HBHalli 017 | Providing and laying Polished Granite stone flooring in required design and patterns in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. PWD CSR 2023-24 Vol-II P. No. 63 I. No. 9.24 | Sqm | 2994.6 | 2994.6 | 0.68 | False | None | None | False | None | False | 2036.328 | 0 |
| 3068539 | 104604 | None | HBHalli 018 | Providing and fixing 18 mm thick gang saw cut granite of any color and shade mirror polished premoulded and prepolished machine cut for kitchen platforms vanity counters window sills facias and similar locations of required size approved shade colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) joints treated with white cement mixed with matching pigment epoxy touch up including rubbing curing moulding and polishing to edges to give high gloss finish etc. complete at all levels - Area of slab over 0.50 m2 PWD CSR 2023-24 Vol-II P. No. 69 I. No. 10.1.2 | Sqm | 4133.85 | 4133.85 | 3.6 | False | None | None | False | None | False | 14881.86 | 0 |
| 3068540 | 104604 | None | HBHalli 019 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer) of approved make in all colours shades except burgundy bottle green black of any size as approved by Engineer- in-Charge in skirting risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg/m2 including pointing in white cement mixed with pigment of matching shade complete.PWD CSR 2023-24 Vol-II P. No. 71 I. No. 10.14 | Sqm | 1161.3 | 1161.3 | 61.52 | False | None | None | False | None | False | 71443.176 | 0 |
| 3068541 | 104604 | None | HBHalli 020 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes channels plates etc. including welding grinding buffing polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories & stainless steel dash fasteners stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts bolts fasteners etc.) including cost of materials labour usage charges of machinery complete as per specifications PWD CSR 2023-24 Vol-II P. No. 85 I. No. 11.28 | Kg | 593.25 | 593.25 | 84.48 | False | None | None | False | None | False | 50117.76 | 0 |
| 3068542 | 104604 | None | HBHalli 021 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. PWD CSR 2023-24 Vol-II P. No. 86 I. No. 11.34B | Kgs | 192.15 | 192.15 | 156.05 | False | None | None | False | None | False | 29985.0075 | 0 |
| 3068543 | 104604 | None | HBHalli 022 | Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance Plus or minus 1mm) with wall thickness 2.0 mm (Plus or minus 0.2 mm) corners of the door frame to be Jointed with galvanized brackets and stainless steel screws joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (Plus or Minus 0.1 mm) wall thickness and 3 nos.
stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge 42x50 mm PVC Extruded section PWD CSR 2023-24 Vol-II P. No. 108 I. No. 12.83.2 | m | 250.95 | 250.95 | 80.7 | False | None | None | False | None | False | 20251.665 | 0 |
| 3068544 | 104604 | None | HBHalli 023 | Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness size 19x19mm for stiles and 15x15mm for top & bottom rails covered with heat moulded PVC C channel of 5mm thick sheet & 30 x 50mm wide to form stiles & 5mm thick & 75mm wide PVC Sheets for top rail lock rail & bottom rail on either side & 5mm thick 20mm wide PVC sheet as gap insert for top rail & bottom rail Panelling of 5mm thick PVC sheet fitted in the M.S. Frame Sealed to the stiles & rails with 5x30mm PVC sheet beading on either side & joined together with solvent cement adhesive etc. Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75 mm Aluminium hinges. (PWD SR Vol-02 2023-24 Item no. 12.53 Page No.104) | Sqm | 1667.4 | 1667.4 | 13.44 | False | None | None | False | None | False | 22409.856 | 0 |
| 3068545 | 104604 | None | HBHalli 024 | Providing and fixing precoated galvanised iron profile sheets (size shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g/m2 as per IS: 277 in 240 mpa steel grade 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineerin-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins rafters and trusses
and including cutting to size and shape wherever required.PWD CSR 2023-24 Vol-II P. No.A-26 I. No.7.38 | Sqm | 596.4 | 596.4 | 37.54 | False | None | None | False | None | False | 22388.856 | 0 |
| 3068546 | 104604 | None | HBHalli 025 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness Zinc coating 120 g/m2 as per IS: 277 in 240 mpa steel grade 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :PWD CSR 2023-24 Vol-II P. No.A-26 I. No.7.39.1 | Mtr | 473.55 | 473.55 | 8.16 | False | None | None | False | None | False | 3864.168 | 0 |
| 3068547 | 104604 | None | HBHalli 026 | Providing and fixing Steel work in built up tubular (round square or rectangular hollow tubes etc.) trusses etc. including cutting hoisting fixing in position and applying a priming coat of approved steel primer including welding and bolted with special shaped washers etc. complete.
Hot finished seamless type tubes including cost of materials labour usage charges of machinery complete as per specifications and as per direction of the Engineer-in-Charge. PWD CSR 2023-24 Vol-II P. No.A-82 I. No.11.16.2 | Kg | 154.35 | 154.35 | 450.0 | False | None | None | False | None | False | 69457.5 | 0 |
| 3068548 | 104604 | None | HBHalli 027 | Water proofing materials PWD CSR 2023-24 Vol-II P. No.A-43 I. No.1028 | Kgs | 46.2 | 46.2 | 30.0 | False | None | None | False | None | False | 1386.0 | 0 |
| 3068549 | 104604 | None | HBHalli 028 | Providing and fixing unplasticised PVC connection pipe with brass unions :45 cm length 20mm NB PWD CSR 2023-24 Vol-II P. No. 118 I. No. 13.8.2.2 | No | 115.5 | 115.5 | 7.0 | False | None | None | False | None | False | 808.5 | 0 |
| 3068550 | 104604 | None | HBHalli 029 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet - 100 mm diameter PWD CSR 2023-24 Vol-II P. No. 118 I. No. 13.9.1 | No | 269.85 | 269.85 | 7.0 | False | None | None | False | None | False | 1888.95 | 0 |
| 3068551 | 104604 | None | HBHalli 030 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc.25 mm nominal dia pipes PWD CSR 2023-24 Vol-II P. No. 122 I. No. 13.32.3 | m | 500.85 | 500.85 | 30.0 | False | None | None | False | None | False | 15025.5 | 0 |
| 3068552 | 104604 | None | HBHalli 031 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement trenching refilling & testing of joints complete as per direction of Engineer in Charge. External work 32 mm nominal dia Pipes PWD CSR 2023-24 Vol-II P. No. 122 I. No. 13.33.4 | m | 390.6 | 390.6 | 20.0 | False | None | None | False | None | False | 7812.0 | 0 |
| 3068553 | 104604 | None | HBHalli 032 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank IS 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet outlet and overflow pipes but without fittings and the base support for tank. PWD CSR 2023-24 Vol-II P. No. 123 I. No. 13.34 | l | 9.45 | 9.45 | 500.0 | False | None | None | False | None | False | 4725.0 | 0 |
| 3068554 | 104604 | None | HBHalli 033 | Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS 13592 type A including jointing with seal ring conforming to IS 5382 leaving 10mm gap for thermal expansion (i) single socketed pipes 100 mm diameter PWD CSR 2023-24 Vol-II P. No. 125 I. No. 13.48 | m | 305.55 | 305.55 | 16.8 | False | None | None | False | None | False | 5133.24 | 0 |
| 3068555 | 104604 | None | HBHalli 034 | Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete PWD CSR 2023-24 Vol-II P. No. 127 I. No. 13.59 | Each | 231.0 | 231.0 | 6.0 | False | None | None | False | None | False | 1386.0 | 0 |
| 3068556 | 104604 | None | HBHalli 035 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials labour and disposal of dismantled material i/c malba all complete as per the direction of Engineer-in charge Orissa pattern W.C Pan of size 580x440 mm (PWD CSR 2023-24 Vol-II P. No. 202 I. No. 20.44.2) | Each | 3724.35 | 3724.35 | 4.0 | False | None | None | False | None | False | 14897.4 | 0 |
| 3068557 | 104604 | None | HBHalli 036 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets 40 mm flush bend overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid PWD CSR 2023-24 Vol-II P. No. 131 I. No. 14.3.1 | Each | 6275.85 | 6275.85 | 2.0 | False | None | None | False | None | False | 12551.7 | 0 |
| 3068558 | 104604 | None | HBHalli 037 | Providing and fixing wash basin with C.I. brackets 15 mm C.P. brass pillar taps 32 mm C.P. brass waste of standard pattern including painting of fittings and brackets cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps PWD CSR 2023-24 Vol-II P. No. 132 I. No. 14.7.1 | Each | 3236.1 | 3236.1 | 2.0 | False | None | None | False | None | False | 6472.2 | 0 |
| 3068559 | 104604 | None | HBHalli 038 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm (PWD CSR 2023-24 Vol-II P. No. 136 I. No. 14.32.2) | Each | 1068.9 | 1068.9 | 2.0 | False | None | None | False | None | False | 2137.8 | 0 |
| 3068560 | 104604 | None | HBHalli 039 | Providing and fixing Bib cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete Economy Class PWD CSR 2023-24 Vol-II P. No. 139 I. No. 14.55a | No | 1172.85 | 1172.85 | 8.0 | False | None | None | False | None | False | 9382.8 | 0 |
| 3068561 | 104604 | None | HBHalli 040 | Providing and fixing Towel rail 600mm length made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete Economy PWD CSR 2023-24 Vol-II P. No. 144 I. No. 14.89a | No | 1325.1 | 1325.1 | 2.0 | False | None | None | False | None | False | 2650.2 | 0 |
| 3068562 | 104604 | None | HBHalli 041 | Providing and fixing Liquid soap dispenser made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class a Economy PWD CSR 2023-24 Vol-II P. No. 144 I. No. 14.85a | No | 1833.3 | 1833.3 | 2.0 | False | None | None | False | None | False | 3666.6 | 0 |
| 3068563 | 104604 | None | HBHalli 042 | Providing and erecting overhead signs with a corrosion resistant 2mm thick aluminium alloy sheet reflectorised with high intensity retro-reflective sheeting as per IRC:67:2022 with vertical and lateral clearance given in clause 802.2 and 802.3 and installed as per clause 802.7 over a designed support system of aluminium alloy or galvanised steel trestles and trusses of sections and type as per structural design requirements and approved plans. Aluminium Alloy Plate for Over Head Sign (PWD CSR 2023-24 Vol-III P. No. 136 I. No.8.9) | Sqm | 6108.9 | 6108.9 | 1.44 | False | None | None | False | None | False | 8796.816 | 0 |
| 3068564 | 104604 | None | HBHalli 043 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mmsizes respectively with automatic flushing cistern with standard flushpipe and C.P. brass spreaders with brass unions and G.I clamps complete including painting of fittings and brackets cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern (PWD CSR 2023-24 Vol-II P. No. 131 I. No. 14.4.1) | Each | 4676.7 | 4676.7 | 2.0 | False | None | None | False | None | False | 9353.4 | 0 |
| 3068565 | 104604 | None | HBHalli 044 | Concealed PVC Conduit System Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends metal junction boxes adhesive paste etc. by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. 19/20 mm dia 2mm thick (P.no.2.it.no.1.1.1) (PWD CSR for Electrical Works for the Year 2023-24) | Mtr | 69.0 | 69.0 | 30.0 | False | None | None | False | None | False | 2070.0 | 0 |
| 3068566 | 104604 | None | HBHalli 045 | PVC/metal conduit Deep Junction Box Supplying and fixing PVC/metal conduit Deep junction box 19/20mm Deep Junction Box (P.no.2.it.no.1.5) (PWD CSR for Electrical Works for the Year 2023-24) | Each | 49.0 | 49.0 | 5.0 | False | None | None | False | None | False | 245.0 | 0 |
| 3068567 | 104604 | None | HBHalli 046 | Flush Mounting Wooden Box Supplying and flush mounting teak wooden box without front plank made of not less than 12 mm thick wood after due groove cutting finishing with necessary cement plastering complete. 8" x 6" x 3" (203 x 152 x 76 mm) (P.no.3.it.no.1.6.4) (PWD CSR for Electrical Works for the Year 2023-24) | Each | 86.0 | 86.0 | 3.0 | False | None | None | False | None | False | 258.0 | 0 |
| 3068568 | 104604 | None | HBHalli 047 | Flush Mounting Wooden Box Supplying and flush mounting teak wooden box without front plank made of not less than 12 mm thick wood after due groove cutting finishing with necessary cement plastering complete. 4" x 4" x 3" ( 101 x 101 x 76 mm) (P.no.3.it.no.1.6.6) (PWD CSR for Electrical Works for the Year 2023-24) | Each | 74.0 | 74.0 | 4.0 | False | None | None | False | None | False | 296.0 | 0 |
| 3068569 | 104604 | None | HBHalli 048 | Wiring for Lightings/Power Circuit Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.1.5 Sqmm (P.no.5.it.no.2.3.2) (PWD CSR for Electrical Works for the Year 2023-24) | Mtr | 26.0 | 26.0 | 30.0 | False | None | None | False | None | False | 780.0 | 0 |
| 3068570 | 104604 | None | HBHalli 049 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.2.5 Sqmm (P.no.5.it.no.2.3.3) (PWD CSR for Electrical Works for the Year 2023-24) | Mtr | 42.0 | 42.0 | 20.0 | False | None | None | False | None | False | 840.0 | 0 |
| 3068571 | 104604 | None | HBHalli 050 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.4 Sqmm (P.no.5.it.no.2.3.4) (PWD CSR for Electrical Works for the Year 2023-24) | Mtr | 63.0 | 63.0 | 20.0 | False | None | None | False | None | False | 1260.0 | 0 |
| 3068572 | 104604 | None | HBHalli 051 | Modular Switches/Sockets/Regulators etc Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6Amps one way (P.no.9.it.no.3.6.1) (PWD CSR for Electrical Works for the Year 2023-24) | Each | 102.0 | 102.0 | 10.0 | False | None | None | False | None | False | 1020.0 | 0 |
| 3068573 | 104604 | None | HBHalli 052 | Modular Switches/Sockets/Regulators etc Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6Amps two way. (P.no.9.it.no.3.6.2) (PWD CSR for Electrical Works for the Year 2023-24) | Each | 166.0 | 166.0 | 5.0 | False | None | None | False | None | False | 830.0 | 0 |
| 3068574 | 104604 | None | HBHalli 053 | Modular Switches/Sockets/Regulators etc Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 16Amps one way switch (P.no.9.it.no.3.6.7) .(PWD CSR for Electrical Works for the Year 2023-24) | Each | 180.0 | 180.0 | 2.0 | False | None | None | False | None | False | 360.0 | 0 |
| 3068575 | 104604 | None | HBHalli 054 | Modular Switches/Sockets/Regulators etc Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 32Amps DP switch. (P.no.9.it.no.3.6.9) (PWD CSR for Electrical Works for the Year 2023-24) | Each | 326.0 | 326.0 | 2.0 | False | None | None | False | None | False | 652.0 | 0 |
| 3068576 | 104604 | None | HBHalli 055 | 4mm Thick Plastic Sheets Supplying 4mm thick plastic sheet with necessary nitches for fixing switches regulators etc and fixing on existing wooden or metal box using N.F. screws. (P.no.9.it.no.3.8) (PWD CSR for Electrical Works for the Year 2023-24) | Sq CM | 0.41 | 0.41 | 300.0 | False | None | None | False | None | False | 123.0 | 0 |
| 3068577 | 104604 | None | HBHalli 056 | Porcelain Fuse Channel Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts bolts and washers. 32Amps (P.no.10.it.no.5.7.2) (PWD CSR for Electrical Works for the Year 2023-24) | Each | 241.0 | 241.0 | 1.0 | False | None | None | False | None | False | 241.0 | 0 |
| 3068578 | 104604 | None | HBHalli 057 | Miniature Circuit Breakers Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve indicator ON/OFF energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32 Amps DP .(p.no.17.it.no.5.18.4) (PWD CSR for Electrical Works for the Year 2023-24) | Each | 739.0 | 739.0 | 1.0 | False | None | None | False | None | False | 739.0 | 0 |
| 3068579 | 104604 | None | HBHalli 058 | MCB Distribution Boards Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps bolts nuts etc. with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS enclosure.I - Single Door 8 Way SP & N (p.no.18.it.no.5.19.3)(PWD CSR for Electrical Works for the Year 2023-24) | Each | 1492.0 | 1492.0 | 1.0 | False | None | None | False | None | False | 1492.0 | 0 |
| 3068580 | 104604 | None | HBHalli 059 | PVC Batten with LED Tubes Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI Greater than 80. Power Input: 220-240V @ 50/60Hz & Power factor Greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.LED light fighting 1 x4'- 20/22 w (p.no.43.it.no.11.3.2) (PWD CSR for Electrical Works for the Year 2023-24) | Each | 690.0 | 690.0 | 3.0 | False | None | None | False | None | False | 2070.0 | 0 |
| 3068581 | 104604 | None | HBHalli 060 | LED Down Lights Supply of round/square recess/surface mounted rolling type LED Down light with .......W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring with Life of 25000 burning hours & 70% lumen maintenance with CRI Greater than 80. Power Input: 220-240V @ 50/60Hz & Power factor Greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 15-18W (p.no.43.it.no.11.5.3) (PWD CSR for Electrical Works for the Year 2023-24) | Each | 1324.0 | 1324.0 | 5.0 | False | None | None | False | None | False | 6620.0 | 0 |
| 3068582 | 104604 | None | HBHalli 061 | Lamp Holder Supplying & Fixing of 70-150 Watts lamp holder 2 Pin (p.no.52.it.no.12.46) (PWD CSR for Electrical Works for the Year 2023-24) | Nos | 63.0 | 63.0 | 6.0 | False | None | None | False | None | False | 378.0 | 0 |
| 3068583 | 104604 | None | HBHalli 062 | Fixing all type of Luminaries Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires required Nos of round blocks and clamps. On wall / ceiling / Rafter / Girders (p.no.56.it.no.13.7.1) (PWD CSR for Electrical Works for the Year 2023-24) | Each | 122.0 | 122.0 | 4.0 | False | None | None | False | None | False | 488.0 | 0 |
| 3068584 | 104604 | None | HBHalli 063 | Fixing of LED Lights Fixing all types and all capacities of 1'x4' / 2'x2' LED Light fittings indoor on the wall / ceiling / rafters / girders with necessary supporting frame using 23/0.0076” twin twisted PVC insulated wires required Nos of round blocks and clamps..(p.no.58.it.no.13.19) (PWD CSR for Electrical Works for the Year 2023-24) | Each | 490.0 | 490.0 | 2.0 | False | None | None | False | None | False | 980.0 | 0 |
| 3068585 | 104604 | None | HBHalli 064 | Supplyingexhaustfanof1440RPMof300mm(12")sizewithbracketbladescompleteforlightdutysuitabletooperateon230V50Hz AC Supply. (PWD CSR for Electrical Works for the Year 2023-24 P.no.30.it.no.6.1) | Each | 1492.0 | 1492.0 | 6.0 | False | None | None | False | None | False | 8952.0 | 0 |
| 3068586 | 104604 | None | HBHalli 065 | SupplyingfixingwiringearthelectrodeforgroundingconduitsI.C.cutoutsandotherequipment'sonthemeterboardusing40mmdia2.90mmthickGIpipe2.5mlongburiedinapit.Thepitshouldbefilledwithequalproportionofsaltandcharcoal150mmall-roundthepipetocompletedepth.Theconnectionfromthepipetotheconduitetc.istobeestablishedthroughGIwireofsizeasperlSIspecification7.3.3.ofIS732using12mmdiaboltsnutswashersandchecknutsetc. the pipe shall have 16 through holes of 12 mm dia . (PWD CSR for Electrical Works for the Year 2023-24 P.no.54.it.no.12.56) | No | 3510.0 | 3510.0 | 1.0 | False | None | None | False | None | False | 3510.0 | 0 |
| 3068587 | 104604 | None | HBHalli 066 | Providing Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications to work site with testing of as per instructions of engineer incharge of work and 1.00 HP/0.75KW 10 STG (p.no.149. it.no 13.6.2) 2023-24 WATER SUPPLY AND UGD WORKS COMMON SCHEDULE OF RATES VOLUME-V) | Each | 14605.5 | 14605.5 | 1.0 | False | None | None | False | None | False | 14605.5 | 0 |