| 3045690 | 102965 | None | code01 | Earth work in surface excavation by mechanical means for lowering & leveling the ground without blasting for all works other than foundation in Ordinary/Soft rock & depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete with all lead and lift as per the direction of engineer in charge | Cum | 398.2 | 398.2 | 320.0 | False | None | None | False | None | False | 127424.0 | 0 |
| 3045691 | 102965 | None | code02 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work.Depth exceeding 1.5 m, but not exceeding 3 m complete with all lead and lift as per the direction of engineer in charge | Cum | 467.5 | 467.5 | 663.66 | False | None | None | False | None | False | 310261.05 | 0 |
| 3045692 | 102965 | None | code03 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. complete with all lead and lift as per the direction of engineer in charge | Cum | 292.6 | 292.6 | 491.83 | False | None | None | False | None | False | 143909.458 | 0 |
| 3045693 | 102965 | None | code04 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates complete with all lead and lift as per the direction of engineer in charge | Cum | 6587.9 | 6587.9 | 46.32 | False | None | None | False | None | False | 305151.528 | 0 |
| 3045694 | 102965 | None | code05 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)complete with all lead and lift as per the direction of engineer in charge | Cum | 7027.9 | 7027.9 | 150.55 | False | None | None | False | None | False | 1058050.345 | 0 |
| 3045695 | 102965 | None | code06 | Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregatescomplete with all lead and lift as per the direction of engineer in charge | Cum | 7044.4 | 7044.4 | 9.81 | False | None | None | False | None | False | 69105.564 | 0 |
| 3045696 | 102965 | None | code07 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. complete with all lead and lift as per the direction of engineer in charge | Sqm | 1354.1 | 1354.1 | 910.43 | False | None | None | False | None | False | 1232813.263 | 0 |
| 3045697 | 102965 | None | code08 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For Column complete as per specifications. complete with all lead and lift as per the direction of engineer in charge | Cum | 11848.32 | 11848.32 | 21.49 | False | None | None | False | None | False | 254620.3968 | 0 |
| 3045698 | 102965 | None | code09 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For Footings complete as per specifications. complete with all lead and lift as per the direction of engineer in charge | Cum | 7527.16 | 7527.16 | 99.84 | False | None | None | False | None | False | 751511.6544 | 0 |
| 3045699 | 102965 | None | code10 | Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates complete with all lead and lift as per the direction of engineer in charge | Cum | 9408.96 | 9408.96 | 10.8 | False | None | None | False | None | False | 101616.768 | 0 |
| 3045700 | 102965 | None | code11 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Lintel and beam complete with all lead and lift as per the direction of engineer in charge | Cum | 12043.67 | 12043.67 | 57.688 | False | None | None | False | None | False | 694775.23496 | 0 |
| 3045701 | 102965 | None | code12 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For Slab complete with all lead and lift as per the direction of engineer in charge | Cum | 11290.95 | 11290.95 | 228.0 | False | None | None | False | None | False | 2574336.6 | 0 |
| 3045702 | 102965 | None | code13 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For Column complete with all lead and lift as per the direction of engineer in charge | Cum | 12796.4 | 12796.4 | 53.74 | False | None | None | False | None | False | 687678.536 | 0 |
| 3045703 | 102965 | None | code14 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification complete with all lead and lift as per the direction of engineer in charge | t | 98402.7 | 98402.7 | 39.78 | False | None | None | False | None | False | 3914459.406 | 0 |
| 3045704 | 102965 | None | code15 | Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete with all lead and lift as per the direction of engineer in charge | Sqm | 280.5 | 280.5 | 2388.97 | False | None | None | False | None | False | 670106.085 | 0 |
| 3045705 | 102965 | None | code16 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete with all lead and lift as per the direction of engineer in charge | Sqm | 324.5 | 324.5 | 648.58 | False | None | None | False | None | False | 210464.21 | 0 |
| 3045706 | 102965 | None | code17 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete with all lead and lift as per the direction of engineer in charge | Sqm | 110.0 | 110.0 | 3037.55 | False | None | None | False | None | False | 334130.5 | 0 |
| 3045707 | 102965 | None | code18 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete with all lead and lift as per the direction of engineer in charge | Sqm | 139.7 | 139.7 | 2388.97 | False | None | None | False | None | False | 333739.109 | 0 |
| 3045708 | 102965 | None | code19 | Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete with all lead and lift as per the direction of engineer in charge | Sqm | 191.4 | 191.4 | 648.58 | False | None | None | False | None | False | 124138.212 | 0 |
| 3045709 | 102965 | None | code20 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete with all lead and lift as per the direction of engineer in charge | Sqm | 977.9 | 977.9 | 49.705 | False | None | None | False | None | False | 48606.5195 | 0 |
| 3045710 | 102965 | None | code21 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2, including pointing in white cement mixed with pigment of matching shade complete with all lead and lift as per the direction of engineer in charge | Sqm | 1060.4 | 1060.4 | 143.22 | False | None | None | False | None | False | 151870.488 | 0 |
| 3045711 | 102965 | None | code22 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.** Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. complete with all lead and lift as per the direction of engineer in charge | Sqm | 3137.2 | 3137.2 | 910.23 | False | None | None | False | None | False | 2855573.556 | 0 |
| 3045712 | 102965 | None | code23 | Providing & fixing of louvered ventilator made out of multi chambered UPVC sections and with minimum TiO2 at 6PHR with TPE and lead free with gaskets grey color having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm 39mm with GI reinforcement of 1mm thickness. Louver clip in aluminium will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm Maximum possible size 1000mm 1000mm. | Sqm | 6353.8 | 6353.8 | 2.15 | False | None | None | False | None | False | 13660.67 | 0 |
| 3045713 | 102965 | None | code24 | Providing & fixing of 2.5 track 2panel sliding windows made out of multi chambered UPVC sections and with minimum TiO2 at 6PHR with TPE and lead free, gaskets grey color having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 94mm width 45mm height with reinforcement of 1mm thickness and Sash with overall size of 39mm 58mm with GI reinforcement of 1.5mm and mesh sash of size 25mm 42mm Coextruded Glazing bead for fixing of glass shall be of size 20mm 24 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 1819mm 1819mm complete with all lead and lift as per the direction of engineer in charge | Sqm | 7206.1 | 7206.1 | 63.0 | False | None | None | False | None | False | 453984.3 | 0 |
| 3045714 | 102965 | None | code25 | Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. (vol-2 P.No. 104, I.No. 12.54 of PWP & IWTD SR 2023-24) | Sqm | 349.8 | 349.8 | 17.01 | False | None | None | False | None | False | 5950.098 | 0 |
| 3045715 | 102965 | None | code26 | Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges -do- with both side prelamcomplete with all lead and lift as per the direction of engineer in charge | Sqm | 2602.6 | 2602.6 | 16.2 | False | None | None | False | None | False | 42162.12 | 0 |
| 3045716 | 102965 | None | code27 | Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete with all lead and lift as per the direction of engineer in charge | Cum | 151881.4 | 151881.4 | 0.288 | False | None | None | False | None | False | 43741.8432 | 0 |
| 3045717 | 102965 | None | code28 | Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete with all lead and lift as per the direction of engineer in charge | Sqm | 8188.4 | 8188.4 | 46.08 | False | None | None | False | None | False | 377321.472 | 0 |
| 3045718 | 102965 | None | code29 | Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete with all lead and lift as per the direction of engineer in charge | Each | 60.5 | 60.5 | 60.0 | False | None | None | False | None | False | 3630.0 | 0 |
| 3045719 | 102965 | None | code30 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.complete with all lead and lift as per the direction of engineer in charge | Each | 1157.2 | 1157.2 | 10.0 | False | None | None | False | None | False | 11572.0 | 0 |
| 3045720 | 102965 | None | code31 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete with all lead and lift as per the direction of engineer in charge | Each | 143.0 | 143.0 | 20.0 | False | None | None | False | None | False | 2860.0 | 0 |
| 3045721 | 102965 | None | code32 | Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/Kankar/Moorum.(Tipper 14 m3) complete with all lead and lift as per the direction of engineer in charge | Cum | 94.6 | 94.6 | 491.83 | False | None | None | False | None | False | 46527.118 | 0 |
| 3045722 | 102965 | None | code33 | Cost of Haulage Excluding Loading and Unloading Taking output 25 t load and lead 10 km = 250 t.km complete with all lead and lift as per the direction of engineer in charge | T.Km | 147.84 | 147.84 | 491.83 | False | None | None | False | None | False | 72712.1472 | 0 |
| 3045723 | 102965 | None | code34 | 250 kVA, 11 kV/433 V, 3 phase Delta Star, Dyn11 : Supply of Auxiliary Transformer with copper windings & oil, cable termination type on both HT & LT outdoor type with off load tap changer in steps of 2.5 % complete with all lead and lift as per the direction of engineer in charge | No | 444335.0 | 444335.0 | 1.0 | False | None | None | False | None | False | 444335.0 | 0 |
| 3045724 | 102965 | None | code35 | 11 kV HT Metering cubicle of different CT Ratio, Both side cable entry type with 3 CT & 3 PT, With Transparent Cover TTB, with 30x8 mm Copper Busbar, Modem & 2 No of Meters for 3 Phase 4 Wire Metering without Load Break Switch (HT Metering Box Fabricated out of 3 mm MS Sheet duly epoxy powder coated) as per revised Specification (Dwg No. BESCOM/GM/QS&S/....Dtd 24.11.2018) complete with all lead and lift as per the direction of engineer in charge | Unit | 243472.0 | 243472.0 | 1.0 | False | None | None | False | None | False | 243472.0 | 0 |
| 3045725 | 102965 | None | code36 | Supplying,erecting,testing & commissioning of 180 kVA Diesel Generator set on existing CC platform comprising of Diesel Engine developing …BHP @ 1500RPM confirming to BS 5514.The engine should be turbocharged, Air/water cooled with 10% over load for 1hour in every 12 hours of operation coupled to suitable capacity alternator rated at 415V , 0.8PF Lag 50Hz, 3Phase , 4wire system, confirming to BS 5000/IS 4722. The alternator shall be of brushless type, screen protected, revolving field, mounted on suitable channel iron base frame, complete with suitable capacity fuel tank, required nos. of batteries of 12/24V as per requirement , Acoustic enclosure as per CPCB approved norms. 500kVA/400kW As per 180 kVA/144 Kw Diesel Generator complete with all lead and lift as per the direction of engineer in charge | Set | 1447891.0 | 1447891.0 | 1.0 | False | None | None | False | None | False | 1447891.0 | 0 |
| 3045726 | 102965 | None | code37 | 11 kV HT Metering cubicle of different CT Ratio, Both side cable entry type with 3 CT & 3 PT, With Transparent Cover TTB, with 30x8 mm Copper Busbar, Modem & 2 No of Meters for 3 Phase 4 Wire Metering without Load Break Switch (HT Metering Box Fabricated out of 3 mm MS Sheet duly epoxy powder coated) as per revised Specification(Dwg No. BESCOM/GM/QS&S/-- Dtd 24.11.2018).complete with all lead and lift as per the direction of engineer in charge | No | 243472.0 | 243472.0 | 1.0 | False | None | None | False | None | False | 243472.0 | 0 |
| 3045727 | 102965 | None | code38 | Supplying erection, testing and commissioning of 11kV Load Break Switch with connected accessories and hardware's etc. suitable for outdoor type complete as per latest IS standard and ESCOM approved technical specification. Single panel LBS. complete with all lead and lift as per the direction of engineer in charge | No | 89523.5 | 89523.5 | 1.0 | False | None | None | False | None | False | 89523.5 | 0 |
| 3045728 | 102965 | None | code39 | Supplying and fixing of LT Wiring kit as per standard technical specification as per ESCOM complete with all lead and lift as per the direction of engineer in charge . | Set | 10472.0 | 10472.0 | 1.0 | False | None | None | False | None | False | 10472.0 | 0 |
| 3045729 | 102965 | None | code40 | LT Distribution Box suitable for 250 KVA Transformer with 1No 400Amps 25kA 4Pole MCCB, suitable capacity Aluminium bus bar mounted in 16SWG powder coated M.S.Box suitable to mount at Transformer Centre as per ESCOM. complete with all lead and lift as per the direction of engineer in charge | No | 37646.0 | 37646.0 | 1.0 | False | None | None | False | None | False | 37646.0 | 0 |
| 3045730 | 102965 | None | code41 | Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards and Lighting, Using sight Rails and Sign Boards at every 100 Mtr wherever necessary as directed. - In hard soil complete with all lead and lift as per the direction of engineer in charge | Cum | 389.0 | 389.0 | 22.5 | False | None | None | False | None | False | 8752.5 | 0 |
| 3045731 | 102965 | None | code42 | Supplying and spreading of jelly of 30mm nominal size with 100 mm thick in the area of metering cubicle and transformer sub station complete with all lead and lift as per the direction of engineer in charge | Cum | 1124.17 | 1124.17 | 22.5 | False | None | None | False | None | False | 25293.825 | 0 |
| 3045732 | 102965 | None | code43 | Supplying and laying of high tension 11KV Cable, dry curing & dry cooling with true triple extrusion, simaultaneously through sigle common head, 3 core under ground XLPE(E) cable having starandrad compact circuler Al. Conductor, screened insulated, insulation screened with extrueded semicounducting compound in combination with copper tape, core laid up extruded inner sheathed of GI Flat strip armoured 7 over all PVC sheathed with specified IS 7098/11/85 with latest amendments & confirming to the GTP Of Group-A 3c x 95 sqmm. Al conductor XLPE 11KV grade complete with all lead and lift as per the direction of engineer in charge | Mtr | 1040.0 | 1040.0 | 80.0 | False | None | None | False | None | False | 83200.0 | 0 |
| 3045733 | 102965 | None | code44 | Supply and making 11KV ( E) Extruted "X" Linked for tubing & moulded and cross linked componets using heat shrinked stress control tube having high permittivity XLPE terminations - INDOOR & OUTDOOR JOINTING KIT confirming to the GTP complete with all lead and lift as per the direction of engineer in charge Out door type - 3CX95/120 Sqmm complete with all lead and lift as per the direction of engineer in charge | Kit | 9855.0 | 9855.0 | 2.0 | False | None | None | False | None | False | 19710.0 | 0 |
| 3045734 | 102965 | None | code45 | Indoor type - 3CX95/120 Sqmm complete with all lead and lift as per the direction of engineer in charge | Kit | 8164.0 | 8164.0 | 6.0 | False | None | None | False | None | False | 48984.0 | 0 |
| 3045735 | 102965 | None | code46 | Supply, Erection, testing and commissioning of AMF panel suitable for 180.KVA DG set. The panel is of cubical type base/floor mounting control panel with hinged doors, undrilled bottom gland plate, aluminum Bus Bar with the accommodation for .....amps 4 pole contactor for alternator with thermal O/L relay,..... Amps 4 pole contactor for mains, HRC fuse for short circuit protection, Microprocessor based AMF module with supply failure timer, Restoration timer, 3 impulse automatic engine start/stop logic, Mains/generator voltage, ....capacity bypass switch and frequency sensing, PCC 1301 controller with water temperature/Lube oil pressure/ engine speed, Voltage/ampere/Frequency/ KVA, Running-hour count, No of starts, Fault indication, over /under speed, Fails to start, Low oil pleasure, High engine temperature, Under/over voltage, over current, Earth fault relay, with indications for Mains on, Load on Mains, Battery charger on Push buttons AMf module by pass Mode, Battery charger unit with inbuilt Auto/Manual and Flat/Boost facility. 125kva to 250KVA complete with all lead and lift as per the direction of engineer in charge | Each | 141293.0 | 141293.0 | 1.0 | False | None | None | False | None | False | 141293.0 | 0 |
| 3045736 | 102965 | None | code47 | Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts,
necessary phase separators, handle and wiring complete. Protection of Overload and Short circuitwith adjustable thermal magnetic release,Micro processor release shall have Earth Fault as per IS/IEC 60947-2 .(Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for
segregating Priority and Non-Priority loads must be available in theMCCB. MCCB shall be provided with double insulation (insulation
between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. FOUR POLE:- 400-500Amps 50kA. complete with all lead and lift as per the direction of engineer in charge | Each | 41497.0 | 41497.0 | 1.0 | False | None | None | False | None | False | 41497.0 | 0 |
| 3045737 | 102965 | None | code48 | Supplying, fixing of LED type panel board indicating lamp with required colour suitable for 220VA.C 50HZ 12/24V DC. complete with all lead and lift as per the direction of engineer in charge | Each | 515.0 | 515.0 | 3.0 | False | None | None | False | None | False | 1545.0 | 0 |
| 3045738 | 102965 | None | code49 | Supplying 400 amps rated 3phase with neutral bus bar using requiemedcapacity electrolyticaluminium strips covered with heat shrinkable couloured PVC sleeve, mounted on phenolic/FRP/DMC insulator whcih are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 400Amps 4x50x10mm Alluminium Strips complete with all lead and lift as per the direction of engineer in charge | Mtr | 4445.0 | 4445.0 | 0.5 | False | None | None | False | None | False | 2222.5 | 0 |
| 3045739 | 102965 | None | code50 | Supplying and fixing angle iron frame work fabricated out of M.S.angle iron.. and M.S. flat ... with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 75x75x6mm complete with all lead and lift as per the direction of engineer in charge | Mtr | 555.0 | 555.0 | 26.0 | False | None | None | False | None | False | 14430.0 | 0 |
| 3045740 | 102965 | None | code51 | Fabricating supplying and mounting MS box made out... SWG suitable for floor/wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2coats of red oxide primer paint and finally finished with approved color enameled metal paint etc., complete 14SWG complete with all lead and lift as per the direction of engineer in charge | Sq CM | 0.5 | 0.5 | 50000.0 | False | None | None | False | None | False | 25000.0 | 0 |
| 3045741 | 102965 | None | code52 | Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N.F. screws.. complete with all lead and lift as per the direction of engineer in charge | Sq CM | 0.35 | 0.35 | 6000.0 | False | None | None | False | None | False | 2100.0 | 0 |
| 3045742 | 102965 | None | code53 | Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. 400Amps complete with all lead and lift as per the direction of engineer in charge | Each | 23600.0 | 23600.0 | 1.0 | False | None | None | False | None | False | 23600.0 | 0 |
| 3045743 | 102965 | None | code54 | Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of pecentage leakage current, programable delay/auto/manual reset facility suitable to mount on DIN rail/ flush mounting on panel board. complete with all lead and lift as per the direction of engineer in charge | Each | 9255.0 | 9255.0 | 1.0 | False | None | None | False | None | False | 9255.0 | 0 |
| 3045744 | 102965 | None | code55 | Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH, KVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy. complete with all lead and lift as per the direction of engineer in charge | Each | 9315.0 | 9315.0 | 1.0 | False | None | None | False | None | False | 9315.0 | 0 |
| 3045745 | 102965 | None | code56 | Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound. complete with all lead and lift as per the direction of engineer in charge | Each | 562.0 | 562.0 | 3.0 | False | None | None | False | None | False | 1686.0 | 0 |
| 3045746 | 102965 | None | code57 | Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. complete with all lead and lift as per the direction of engineer in charge | Each | 515.0 | 515.0 | 3.0 | False | None | None | False | None | False | 1545.0 | 0 |
| 3045747 | 102965 | None | code58 | Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit with thermal Magnetic/Micro processor release and Earth Fault as per IS-13947. ( Icu = Ics) complete with all lead and lift as per the direction of engineer in charge 125Amps 4Pole 25kA complete with all lead and lift as per the direction of engineer in charge | Each | 10341.0 | 10341.0 | 4.0 | False | None | None | False | None | False | 41364.0 | 0 |
| 3045748 | 102965 | None | code59 | 200Amps 4Pole 25kA complete with all lead and lift as per the direction of engineer in charge | Each | 17301.0 | 17301.0 | 2.0 | False | None | None | False | None | False | 34602.0 | 0 |
| 3045749 | 102965 | None | code60 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 50-63Amps TPN complete with all lead and lift as per the direction of engineer in charge | Each | 3088.0 | 3088.0 | 4.0 | False | None | None | False | None | False | 12352.0 | 0 |
| 3045750 | 102965 | None | code61 | Supplying ,fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 volts grade, for power factor improvement of rotating machineries like induction motor.. Cost per KVAR. complete with all lead and lift as per the direction of engineer in charge | Kvar | 480.0 | 480.0 | 30.0 | False | None | None | False | None | False | 14400.0 | 0 |
| 3045751 | 102965 | None | code62 | Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts,nuts and washers etc.,.) 3-120sec setting. complete with all lead and lift as per the direction of engineer in charge | Each | 2315.0 | 2315.0 | 1.0 | False | None | None | False | None | False | 2315.0 | 0 |
| 3045752 | 102965 | None | code63 | Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. complete with all lead and lift as per the direction of engineer in charge | Each | 4277.0 | 4277.0 | 1.0 | False | None | None | False | None | False | 4277.0 | 0 |
| 3045753 | 102965 | None | code64 | Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440v A.C. 50 Hz 12/24v D.C. complete with all lead and lift as per the direction of engineer in charge | Each | 515.0 | 515.0 | 3.0 | False | None | None | False | None | False | 1545.0 | 0 |
| 3045754 | 102965 | None | code65 | Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage current, programmable delay/auto/ manual reset facility suitable to mount on DIN rail/ flush mounting on panel board. - 63 Amps 4 pole complete with all lead and lift as per the direction of engineer in charge | Each | 9255.0 | 9255.0 | 1.0 | False | None | None | False | None | False | 9255.0 | 0 |
| 3045755 | 102965 | None | code66 | Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 40A complete with all lead and lift as per the direction of engineer in charge | Each | 6119.0 | 6119.0 | 1.0 | False | None | None | False | None | False | 6119.0 | 0 |
| 3045756 | 102965 | None | code67 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. --40 Amps TPN complete with all lead and lift as per the direction of engineer in charge | Each | 3044.0 | 3044.0 | 2.0 | False | None | None | False | None | False | 6088.0 | 0 |
| 3045757 | 102965 | None | code68 | Supplying . 250 amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 250Amps 4x30x10mm Aluminium Strips complete with all lead and lift as per the direction of engineer in charge | Mtr | 3435.0 | 3435.0 | 8.0 | False | None | None | False | None | False | 27480.0 | 0 |
| 3045758 | 102965 | None | code69 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32 Amps DP complete with all lead and lift as per the direction of engineer in charge | Each | 739.0 | 739.0 | 4.0 | False | None | None | False | None | False | 2956.0 | 0 |
| 3045759 | 102965 | None | code70 | Supplying and fixing angle iron frame work fabricated out of M.S.angle iron.. and M.S. flat ... with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. -40x40x6mm complete with all lead and lift as per the direction of engineer in charge | m | 305.0 | 305.0 | 5.0 | False | None | None | False | None | False | 1525.0 | 0 |
| 3045760 | 102965 | None | code71 | Fabricating supplying and mounting MS box made out... SWG suitable for floor/wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover,equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complet -14SWG complete with all lead and lift as per the direction of engineer in charge | Sqm | 0.5 | 0.5 | 20000.0 | False | None | None | False | None | False | 10000.0 | 0 |
| 3045761 | 102965 | None | code72 | Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N.F. screws. complete with all lead and lift as per the direction of engineer in charge | Sqm | 0.35 | 0.35 | 5000.0 | False | None | None | False | None | False | 1750.0 | 0 |
| 3045762 | 102965 | None | code73 | Supplying and fixing regular MCB distribution boards on wall/woodboard/flush mounting using required clamps ,bolts,nuts,etc with provision for fixing suitable type capacity MCB's single phase/3phase /double door with powder coated painting. Made out of 14 SWG MS Enclousure. complete with all lead and lift as per the direction of engineer in charge 4way TP&N complete with all lead and lift as per the direction of engineer in charge | Each | 4038.0 | 4038.0 | 2.0 | False | None | None | False | None | False | 8076.0 | 0 |
| 3045763 | 102965 | None | code74 | 8 way SP & N complete with all lead and lift as per the direction of engineer in charge | Each | 1854.0 | 1854.0 | 2.0 | False | None | None | False | None | False | 3708.0 | 0 |
| 3045764 | 102965 | None | code75 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 withShort circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6 to 32Amps SP complete with all lead and lift as per the direction of engineer in charge | Each | 415.0 | 415.0 | 20.0 | False | None | None | False | None | False | 8300.0 | 0 |
| 3045765 | 102965 | None | code76 | 6 to 32Amps DP complete with all lead and lift as per the direction of engineer in charge | Each | 739.0 | 739.0 | 4.0 | False | None | None | False | None | False | 2956.0 | 0 |
| 3045766 | 102965 | None | code77 | 6-32Amps TPN complete with all lead and lift as per the direction of engineer in charge | Each | 1717.0 | 1717.0 | 2.0 | False | None | None | False | None | False | 3434.0 | 0 |
| 3045767 | 102965 | None | code78 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 1.0 sqmm complete with all lead and lift as per the direction of engineer in charge | m | 19.0 | 19.0 | 1000.0 | False | None | None | False | None | False | 19000.0 | 0 |
| 3045768 | 102965 | None | code79 | 1.5sqmm complete with all lead and lift as per the direction of engineer in charge | m | 26.0 | 26.0 | 2500.0 | False | None | None | False | None | False | 65000.0 | 0 |
| 3045769 | 102965 | None | code80 | 2.5 sqmm complete with all lead and lift as per the direction of engineer in charge | m | 42.0 | 42.0 | 1500.0 | False | None | None | False | None | False | 63000.0 | 0 |
| 3045770 | 102965 | None | code81 | 4.0sqmm complete with all lead and lift as per the direction of engineer in charge | m | 63.0 | 63.0 | 500.0 | False | None | None | False | None | False | 31500.0 | 0 |
| 3045771 | 102965 | None | code82 | Supplying heavy gauge PVC conduit pipe…. Dia 2mm2.0mm thick comirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before Concreting in the slab. The conduit should be tied to thereinforcement by rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end Enclosures, run with 18 SWG G I fish wire wherever necessary.. 19/20mm dia,2mm thick complete with all lead and lift as per the direction of engineer in charge | m | 66.0 | 66.0 | 300.0 | False | None | None | False | None | False | 19800.0 | 0 |
| 3045772 | 102965 | None | code83 | 25mm dia,2mm thick complete with all lead and lift as per the direction of engineer in charge | m | 78.0 | 78.0 | 200.0 | False | None | None | False | None | False | 15600.0 | 0 |
| 3045773 | 102965 | None | code84 | Supplying heavy gauge PVC conduit pipe…. Dia 2mm, 2.5mm thick with suitable size bends, metal junction boxes, adhesive paste etc., by groove cutting in the wall & fixing by bracing "U" or "J" hooks & cement plastering up to the wall surface and run with 18SWG GI fish wire run throut the conduit wherever necessary. 19/20mm dia,2mm thick complete with all lead and lift as per the direction of engineer in charge | m | 68.0 | 68.0 | 300.0 | False | None | None | False | None | False | 20400.0 | 0 |
| 3045774 | 102965 | None | code85 | 25mm dia,2mm thick complete with all lead and lift as per the direction of engineer in charge | m | 79.0 | 79.0 | 200.0 | False | None | None | False | None | False | 15800.0 | 0 |
| 3045775 | 102965 | None | code86 | 32mm dia,2.5mm thick complete with all lead and lift as per the direction of engineer in charge | m | 99.0 | 99.0 | 10.0 | False | None | None | False | None | False | 990.0 | 0 |
| 3045776 | 102965 | None | code87 | Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto 3Mts from tapping pt to out let via Switch box complete with all lead and lift as per the direction of engineer in charge | Point | 285.0 | 285.0 | 50.0 | False | None | None | False | None | False | 14250.0 | 0 |
| 3045777 | 102965 | None | code88 | Medium point above 3M & upto 6M from tapping pt to out let via Switch box complete with all lead and lift as per the direction of engineer in charge | Point | 394.0 | 394.0 | 10.0 | False | None | None | False | None | False | 3940.0 | 0 |
| 3045778 | 102965 | None | code89 | Long point above 6M & upto 10M from tapping pt to out let via Switch box complete with all lead and lift as per the direction of engineer in charge | Point | 570.0 | 570.0 | 10.0 | False | None | None | False | None | False | 5700.0 | 0 |
| 3045779 | 102965 | None | code90 | Two outlets in a row above 3M upto 6M from tapping pt to out let via Switch box complete with all lead and lift as per the direction of engineer in charge | Point | 708.0 | 708.0 | 2.0 | False | None | None | False | None | False | 1416.0 | 0 |
| 3045780 | 102965 | None | code91 | Supplying & flush mounting powder coated / Galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in brick/stone/C.C wall 1-2 way complete with all lead and lift as per the direction of engineer in charge | Each | 103.0 | 103.0 | 10.0 | False | None | None | False | None | False | 1030.0 | 0 |
| 3045781 | 102965 | None | code92 | 3 way complete with all lead and lift as per the direction of engineer in charge | Each | 124.0 | 124.0 | 10.0 | False | None | None | False | None | False | 1240.0 | 0 |
| 3045782 | 102965 | None | code93 | 4-5 way complete with all lead and lift as per the direction of engineer in charge | Each | 137.0 | 137.0 | 10.0 | False | None | None | False | None | False | 1370.0 | 0 |
| 3045783 | 102965 | None | code94 | 6 way complete with all lead and lift as per the direction of engineer in charge | Each | 173.0 | 173.0 | 10.0 | False | None | None | False | None | False | 1730.0 | 0 |
| 3045784 | 102965 | None | code95 | 8 way complete with all lead and lift as per the direction of engineer in charge | Each | 219.0 | 219.0 | 12.0 | False | None | None | False | None | False | 2628.0 | 0 |
| 3045785 | 102965 | None | code96 | 10-12 way complete with all lead and lift as per the direction of engineer in charge | Each | 261.0 | 261.0 | 5.0 | False | None | None | False | None | False | 1305.0 | 0 |
| 3045786 | 102965 | None | code97 | Supplying and fixing PVC/Metal conduit deep juction box 32mm Deep junction box | Each | 61.0 | 61.0 | 2.0 | False | None | None | False | None | False | 122.0 | 0 |
| 3045787 | 102965 | None | code98 | Supplying and fixing Metal fan box with round hook complete with all lead and lift as per the direction of engineer in charge | No | 117.0 | 117.0 | 10.0 | False | None | None | False | None | False | 1170.0 | 0 |
| 3045788 | 102965 | None | code99 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch complete with all lead and lift as per the direction of engineer in charge | Each | 102.0 | 102.0 | 60.0 | False | None | None | False | None | False | 6120.0 | 0 |
| 3045789 | 102965 | None | code100 | 6Amps Two way Switch complete with all lead and lift as per the direction of engineer in charge | Each | 166.0 | 166.0 | 4.0 | False | None | None | False | None | False | 664.0 | 0 |
| 3045790 | 102965 | None | code101 | 6Amps 3way socket complete with all lead and lift as per the direction of engineer in charge | Each | 171.0 | 171.0 | 15.0 | False | None | None | False | None | False | 2565.0 | 0 |
| 3045791 | 102965 | None | code102 | 6/16A universal socket complete with all lead and lift as per the direction of engineer in charge | Each | 236.0 | 236.0 | 10.0 | False | None | None | False | None | False | 2360.0 | 0 |
| 3045792 | 102965 | None | code103 | 16Amps one way switch complete with all lead and lift as per the direction of engineer in charge | Each | 180.0 | 180.0 | 10.0 | False | None | None | False | None | False | 1800.0 | 0 |
| 3045793 | 102965 | None | code104 | Stepped fan regulator 2 module complete with all lead and lift as per the direction of engineer in charge | Each | 357.0 | 357.0 | 10.0 | False | None | None | False | None | False | 3570.0 | 0 |
| 3045794 | 102965 | None | code105 | Supplying & fixing superior quality modular switch mounting polycorbonate plate with necessary supporting back plate with required nos. of machine screwes, bolts nuts etc., complete on the existing metal/PVC box. 1 to 2 Module complete with all lead and lift as per the direction of engineer in charge | Each | 138.0 | 138.0 | 10.0 | False | None | None | False | None | False | 1380.0 | 0 |
| 3045795 | 102965 | None | code106 | 3 Module complete with all lead and lift as per the direction of engineer in charge | Each | 159.0 | 159.0 | 10.0 | False | None | None | False | None | False | 1590.0 | 0 |
| 3045796 | 102965 | None | code107 | 4 Module complete with all lead and lift as per the direction of engineer in charge | Each | 177.0 | 177.0 | 10.0 | False | None | None | False | None | False | 1770.0 | 0 |
| 3045797 | 102965 | None | code108 | 6 Module complete with all lead and lift as per the direction of engineer in charge | Each | 220.0 | 220.0 | 10.0 | False | None | None | False | None | False | 2200.0 | 0 |
| 3045798 | 102965 | None | code109 | 8 Module complete with all lead and lift as per the direction of engineer in charge | Each | 261.0 | 261.0 | 12.0 | False | None | None | False | None | False | 3132.0 | 0 |
| 3045799 | 102965 | None | code110 | 10 -12 Module complete with all lead and lift as per the direction of engineer in charge | Each | 319.0 | 319.0 | 5.0 | False | None | None | False | None | False | 1595.0 | 0 |
| 3045800 | 102965 | None | code111 | Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V 50/60Hz & Power factor 0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 5-6W complete with all lead and lift as per the direction of engineer in charge | No | 571.0 | 571.0 | 20.0 | False | None | None | False | None | False | 11420.0 | 0 |
| 3045801 | 102965 | None | code112 | LED square or round down light 10-12W complete with all lead and lift as per the direction of engineer in charge | No | 885.0 | 885.0 | 10.0 | False | None | None | False | None | False | 8850.0 | 0 |
| 3045802 | 102965 | None | code113 | Supply of recess mounting non integrated type led down light luminaries comprising of pressure ducast/extruded aluminum housing, with spring loaded false ceiling clamps , LED of power/COB with CCT 6500 degree K, CRI 70% . Efficacy 100 lumen per watt , 120 degree beam spread , life 25000 burning hours and compliance to is 10322/IEC 60598, lm 70 & 80. the lamp compartment is enclosed with anti glare opal diffused which enhances the light level. LED id driven by HF electronic driver integrated in separate control gear assembly., with PF 0.95 , power loss should 5% of lamp wattage ., short-circuited and open circuit protection to be integrated in the circuit, THD less than 20% , life as per LM 798. the operating in put voltage should be between 130 to 275 volts , BIS approved and tested by NABL/cpri accredited laboratory with 2 years warranty against manufacturing defect working under standard electric conditions. LED square / round down light 5-6 w complete with all lead and lift as per the direction of engineer in charge | No | 805.0 | 805.0 | 15.0 | False | None | None | False | None | False | 12075.0 | 0 |
| 3045803 | 102965 | None | code114 | Supply of LED Streetlight with pressure die cast aluminium housing body with optimal heat sink for better thermal dissipation. Diffuser with injection moulded & is made of polycarbonate material with high transmission index, delivering superior light output. Rated life Burning Hrs 50000hr Lumen Maintenance of 70%. CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminare 1K08. Power Factor 0.9 with mains Current should not be greater than 0.1A to 0.7A Surge Protection- Min 4KV along with Over voltage/Overload, short circuit/ misswiring protection. Compatable for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operates wide voltage range from 100V to 270V 50/60Hz application. Over load & Short circuit protection ensures reliable operation in spite of problem in output side. Complaince to IS 10322/IEC 60598, LM 79 LM 80 Adherence with RoHS. UL approved MCPCB. Top access streetlight with single screw to encure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency1301m/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer Cree/Nichia/ Lumileds/Osram make LED Source. LED Streetlight 25 watts complete with all lead and lift as per the direction of engineer in charge | Each | 2425.0 | 2425.0 | 9.0 | False | None | None | False | None | False | 21825.0 | 0 |
| 3045804 | 102965 | None | code115 | Fabricating , Supplying and erection of 7.0 mts Long Hot dip Galvanised Octogonal pole with BSEN 10025 grade S 355JO steel plate for shaft, IS 2062, for base plate, with door opening arrangments , including suitable boards, bakalite sheet & MCBs as per IS specification suitable to with stand the wind speed of 47 m /sec for 7.0 mts pole in single section and single joint welded as per IS 9595/ IS10178 AWS having dimension bottom 130 mm , top 70 mm with 3 mm thick suitable base plate & 4 nos of 450 mm long J bolts along with template and the pole shall be hot dip galvanized in single dipping with not less than 65 micron as per ASTM-A- 123 and 153 ec ( excluding foundation) as per drawing appended 7 meters - Top 70mm and bottom 130mm dia. complete with all lead and lift as per the direction of engineer in charge | Each | 13500.0 | 13500.0 | 9.0 | False | None | None | False | None | False | 121500.0 | 0 |
| 3045805 | 102965 | None | code116 | Supplying & fixing of Hot dip galvanized MS bracket suitable for out door Luminaries and mounted on Octoganal pole using necessary bolts, nuts etc., Complete. Single arm Bracket with 1500 mm standard 40/50 MM dia complete with all lead and lift as per the direction of engineer in charge | Each | 2100.0 | 2100.0 | 9.0 | False | None | None | False | None | False | 18900.0 | 0 |
| 3045806 | 102965 | None | code117 | Supplying capacitor type 48" sweep ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. single phase AC supply confirminf to ISS-374-1979 and with double ball bearing system. 48" Sweep (1200mm) Regular model complete with all lead and lift as per the direction of engineer in charge | Each | 2984.0 | 2984.0 | 6.0 | False | None | None | False | None | False | 17904.0 | 0 |
| 3045807 | 102965 | None | code118 | Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. complete with all lead and lift as per the direction of engineer in charge | Each | 4446.0 | 4446.0 | 4.0 | False | None | None | False | None | False | 17784.0 | 0 |
| 3045808 | 102965 | None | code119 | Supplying fixing and wiring earth electrode for grounding of lift, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 m long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the electrode.The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm all around with alternate layers of salt and charcoal form the bottom of the pipe to the bottom of the CC chamber.The connection from the electrode is to be established through GI strip using GI bolts and nuts. complete with all lead and lift as per the direction of engineer in charge | Nos | 4256.0 | 4256.0 | 6.0 | False | None | None | False | None | False | 25536.0 | 0 |
| 3045809 | 102965 | None | code120 | Supplying & Fixing Chemical earthling for grounding. Conduits, IC cutouts & other equipments backfill compound which is non-corrosive, thermally conductive, potential to permissible limits, superior Fault conduction capacity, non toxic, weather resistance & capable of achieving ohmic value less than one ohm Using 10ft. Copper bonded rod with backfill compound complete with all lead and lift as per the direction of engineer in charge | Kit | 8494.0 | 8494.0 | 6.0 | False | None | None | False | None | False | 50964.0 | 0 |
| 3045810 | 102965 | None | code121 | Supplying and running of GI / Copper strips for grounding connections using necessary fixing materials as required 25X3mm Copper strip complete with all lead and lift as per the direction of engineer in charge | m | 570.0 | 570.0 | 20.0 | False | None | None | False | None | False | 11400.0 | 0 |
| 3045811 | 102965 | None | code122 | 25x6mm GI strip complete with all lead and lift as per the direction of engineer in charge | m | 128.0 | 128.0 | 20.0 | False | None | None | False | None | False | 2560.0 | 0 |
| 3045812 | 102965 | None | code123 | 600X600X3mm Copper Plate complete with all lead and lift as per the direction of engineer in charge | Each | 7421.0 | 7421.0 | 2.0 | False | None | None | False | None | False | 14842.0 | 0 |
| 3045813 | 102965 | None | code124 | 25X3mm GI strip complete with all lead and lift as per the direction of engineer in charge | Mtr | 82.0 | 82.0 | 50.0 | False | None | None | False | None | False | 4100.0 | 0 |
| 3045814 | 102965 | None | code125 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests complete with all lead and lift as per the direction of engineer in charge | Each | 5372.4 | 5372.4 | 3.0 | False | None | None | False | None | False | 16117.2 | 0 |
| 3045815 | 102965 | None | code126 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid complete with all lead and lift as per the direction of engineer in charge | Each | 6574.7 | 6574.7 | 6.0 | False | None | None | False | None | False | 39448.2 | 0 |
| 3045816 | 102965 | None | code127 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern complete with all lead and lift as per the direction of engineer in charge | Each | 4899.4 | 4899.4 | 7.0 | False | None | None | False | None | False | 34295.8 | 0 |
| 3045817 | 102965 | None | code128 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: using White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer. (Vol-2 P.No. 132, I.No. 14.7.1 of PWP & IWTD SR 2023-24) | Each | 3958.9 | 3958.9 | 5.0 | False | None | None | False | None | False | 19794.5 | 0 |
| 3045818 | 102965 | None | code129 | KSRB 11 - 15.1 : Providing and fixing 600x450mm Bevel lead edge mirror of superior glass with 6mm thick hard board backing and fixed wooden cleats with CP screws, washers, including cost of materials, labour complete with all lead and lift as per the direction of engineer in charge | Each | 1342.0 | 1342.0 | 5.0 | False | None | None | False | None | False | 6710.0 | 0 |
| 3045819 | 102965 | None | code130 | Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete (Vol-2 P.No. 127, I.No. 13.59 of PWP & IWTD SR 2023-24) | Each | 242.0 | 242.0 | 15.0 | False | None | None | False | None | False | 3630.0 | 0 |
| 3045820 | 102965 | None | code131 | Providing and fixing brass bib cock of approved quality : 20 mm nominal bore (P.No. 117, I.No. 13.2.2 of PWP & IWTD SR 2023-24,Vol-II ) | Each | 335.5 | 335.5 | 15.0 | False | None | None | False | None | False | 5032.5 | 0 |
| 3045821 | 102965 | None | code132 | Providing and fixing in position chromium plated brass shower rose with 15 or 20mm inlet including cost of all materials, labour and HOM with all leads complete as per specifications. Specification No.KBS 13.2.16 / 13.3 - 150mm (P.No. 118, I.No. 13.9.2 of PWP & IWTD SR 2023-24,Vol-II ) | Each | 306.9 | 306.9 | 5.0 | False | None | None | False | None | False | 1534.5 | 0 |
| 3045822 | 102965 | None | code133 | Providing and fixing unplasticised PVC connection pipe with brass unions :15 mm nominal bore including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. complete with all lead and lift as per the direction of engineer in charge | Each | 91.3 | 91.3 | 21.0 | False | None | None | False | None | False | 1917.3 | 0 |
| 3045823 | 102965 | None | code134 | Providing and fixing in position 25 mm nominal bore gun metal non return valve horizantal type of approved make including cost of all materials, labour and HOM of equipments complete with all lead and lift as per the direction of engineer in charge | Each | 481.8 | 481.8 | 2.0 | False | None | None | False | None | False | 963.6 | 0 |
| 3045824 | 102965 | None | code135 | KSRB13 .85: Providing and fixing to wall, ceiling and floor chlorinated poly vinyl chloride ( CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all cpvc plain and brasss threaded fittings including fixing thepipes with the clamp at 1.00mtr spacing . This includes joining of pipes fittings with one set of cpvc solvent cement and testing of joints complete ( Internal works ) ( Concealed work including cutting chases and good the walls etc.) A)15mm dia pipe nominal OD pipes complete with all lead and lift as per the direction of engineer in charge | m | 200.2 | 200.2 | 15.0 | False | None | None | False | None | False | 3003.0 | 0 |
| 3045825 | 102965 | None | code136 | B)20 mm dia pipe nominal OD pipes complete with all lead and lift as per the direction of engineer in charge | m | 266.2 | 266.2 | 50.0 | False | None | None | False | None | False | 13310.0 | 0 |
| 3045826 | 102965 | None | code137 | Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately complete with all lead and lift as per the direction of engineer in charge | l | 9.9 | 9.9 | 1000.0 | False | None | None | False | None | False | 9900.0 | 0 |
| 3045827 | 102965 | None | code138 | Providing and fixing to wall, ceiling and floor chlorinated poly vinyl chloride ( CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all cpvc plain and brasss threaded fittings including fixing thepipes with the clamp at . This includes joining of pipes fittings with one set of cpvc solvent cement and testing of joints complete (External works ) 15mm dia pipe nominal OD pipes complete with all lead and lift as per the direction of engineer in charge | m | 182.6 | 182.6 | 10.0 | False | None | None | False | None | False | 1826.0 | 0 |
| 3045828 | 102965 | None | code139 | 20 mm dia pipe nominal OD pipes complete with all lead and lift as per the direction of engineer in charge | m | 238.7 | 238.7 | 50.0 | False | None | None | False | None | False | 11935.0 | 0 |
| 3045829 | 102965 | None | code140 | 25 mm dia pipe nominal OD pipes complete with all lead and lift as per the direction of engineer in charge | m | 325.6 | 325.6 | 200.0 | False | None | None | False | None | False | 65120.0 | 0 |
| 3045830 | 102965 | None | code141 | 40 mm dia pipe nominal OD pipes complete with all lead and lift as per the direction of engineer in charge | m | 524.7 | 524.7 | 50.0 | False | None | None | False | None | False | 26235.0 | 0 |
| 3045831 | 102965 | None | code142 | Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work complete with all lead and lift as per the direction of engineer in charge | m | 1023.0 | 1023.0 | 70.0 | False | None | None | False | None | False | 71610.0 | 0 |
| 3045832 | 102965 | None | code143 | Providing and fixing PVC (S.W.R) Gully Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete complete with all lead and lift as per the direction of engineer in charge | Each | 380.6 | 380.6 | 6.0 | False | None | None | False | None | False | 2283.6 | 0 |
| 3045833 | 102965 | None | code144 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay (non modular) bricks of class designation 3.5 complete with all lead and lift as per the direction of engineer in charge | Each | 6206.2 | 6206.2 | 10.0 | False | None | None | False | None | False | 62062.0 | 0 |
| 3045834 | 102965 | None | code145 | Extra for item .no. KSRB 12-8.1 depth beyond 450 mm and brick masonry chamber with table moulded non- modular bricks of class designation 50 in cement mortar 1:5,for every 150 mm depth or part there of including cost of materials, labour charges, curing complete as per specifications complete with all lead and lift as per the direction of engineer in charge | Each | 7086.2 | 7086.2 | 3.0 | False | None | None | False | None | False | 21258.6 | 0 |
| 3045835 | 102965 | None | code146 | Main Furnace: Fabricated Main Furnace Frame for nousing refractory bricks and other equipments. main door, door lifting mechanism, manual and motor operating Counter weight Ash door Ash tray and tools etc Furnace front cover with SS sneet. and all other side with MS sheet with all other accessories as per drawing complete with all lead and lift as per the direction of engineer in charge | Set | 1200000.0 | 1200000.0 | 2.0 | False | None | None | False | None | False | 2400000.0 | 0 |
| 3045836 | 102965 | None | code147 | Refractory Items: Furnace chamber, Secondary chamber, smoke trench Fresh air trench, constructed by refractory bricks The above furnace chamber consisting of standard. Hot & Cold. Insulation bricks And also different size of refractory slabs arch bricks, for binding the bricks clay, morter, castables and ceramic blanket use to complete the furnace chamber complete with all lead and lift as per the direction of engineer in charge | Set | 1000000.0 | 1000000.0 | 2.0 | False | None | None | False | None | False | 2000000.0 | 0 |
| 3045837 | 102965 | None | code148 | Electrical heating coi: INichrome 80/20 of 8 swg wire use to construct Vertically mounting type of each coil 3 5 Kw capacity Housed in SS Pipe grade 316 with an insulation of ceramic Each furnace total Power of 42 KW Total number of coils12 No s complete with all lead and lift as per the direction of engineer in charge | Set | 1600000.0 | 1600000.0 | 2.0 | False | None | None | False | None | False | 3200000.0 | 0 |
| 3045838 | 102965 | None | code149 | Body Charging Trolley: The trolley fordable trolley with 3 stage of charging oody. made up of fabricated 5mm plate channels grouting frame, etc with spring loaded scissor lifting mechanism operated manually complete with all lead and lift as per the direction of engineer in charge | Set | 500000.0 | 500000.0 | 2.0 | False | None | None | False | None | False | 1000000.0 | 0 |
| 3045839 | 102965 | None | code150 | Control Panel: Control panel consisting of electrical items for operating remote control system with display meters Ready for installing for connecting incoming cable and outgoing cables with all safety precautions complete with all lead and lift as per the direction of engineer in charge | Set | 500000.0 | 500000.0 | 2.0 | False | None | None | False | None | False | 1000000.0 | 0 |
| 3045840 | 102965 | None | code151 | Control & Power cables: The control and power cables laying & termination to connected equipment of furnace, Including isolators near the equipment as per Electrical inspectorate guidelines earthing of all equipments as per IS Standard complete with all lead and lift as per the direction of engineer in charge | Set | 400000.0 | 400000.0 | 2.0 | False | None | None | False | None | False | 800000.0 | 0 |
| 3045841 | 102965 | None | code152 | Water Pump and connecting pipe and wolves Water pump 2HP 3Phase 415V for scrubber unit and necessary pipe lines(Inlet and Outlet 1 " M S pipe ) complete with all lead and lift as per the direction of engineer in charge | Set | 150000.0 | 150000.0 | 2.0 | False | None | None | False | None | False | 300000.0 | 0 |
| 3045842 | 102965 | None | code153 | Main door operating gear system: 3Phase V, HP motor with gear box output of 5 rpm complete with all lead and lift as per the direction of engineer in charge | Set | 250000.0 | 250000.0 | 2.0 | False | None | None | False | None | False | 500000.0 | 0 |
| 3045843 | 102965 | None | code154 | Fresh air blower: Blower of 1HP and connecting ducts for furnace chamber to provide a fresh air for combustion of fire complete with all lead and lift as per the direction of engineer in charge | Set | 150000.0 | 150000.0 | 2.0 | False | None | None | False | None | False | 300000.0 | 0 |
| 3045844 | 102965 | None | code155 | Scrubber Unit: SS water scrubber with vertical venture arrangement with water inlet/outlet connections from furnace duct to chimney exhaust fan, water circulating system Scrubber mounted on a platform made up of MS angle/Channel support and sheets SS sheet pipe connecting from smoke duct to scrubber/Exhaustfan/Chimminey.230x230mm pipe and Chimney connecting pipe 330x330rnm pcie blower outlet 230mm .Materials scrubber and pipeline SS304 2mm thIck sheet and Flagges MS 8mm thick as per drawing. complete with all lead and lift as per the direction of engineer in charge | Set | 975000.0 | 975000.0 | 2.0 | False | None | None | False | None | False | 1950000.0 | 0 |
| 3045845 | 102965 | None | code156 | Exhaust Blower: Exhaust blower ( SS 304 .2MM Sheet) Fabricated with body.fan.50mrn dia Shaft and bearing, inlet and outlet 230x230 mm pipe and 5/7 5 HP 3 phase motor to drive the blower, mounted on M S Frame work ( Blower fan drive with Belt drive ) complete with all lead and lift as per the direction of engineer in charge | Set | 525000.0 | 525000.0 | 2.0 | False | None | None | False | None | False | 1050000.0 | 0 |
| 3045846 | 102965 | None | code157 | Erection Charges: Erection charges for (a)fixing of Frame. Main Door. Counter weight. Mechanical and Electrical operating door system.(b) refractory lining work. ID 12 Fixing of Fresh air blower, Construction of Trench, Fabrication of Scrubber lining work. Fixing of scrubber unit, Erection of self supporting chimney Erection and fixing of related Panels and other systems/equipments complete with all lead and lift as per the direction of engineer in charge | LS | 800000.0 | 800000.0 | 2.0 | False | None | None | False | None | False | 1600000.0 | 0 |
| 3045847 | 102965 | None | code158 | Base plate :900 x 900 x20mm,1no And 900 dia x16 mm 1no Vertical Ribs 12mm thickness Chimney flanges 10 mm thick chimney Flanges 16mm thick -8 No's & Guzzeted Plate .10mm thick Conical pipe - Conical Segment of 700/300 dia ,10mm thick total length of 10mtrs length of 2 pieces Straight pipe -300 dia 5mm thick total length of 20 meters in 3 pieces Inspection door 400 x 500 mm .10mm thick covering plate, Foundation bolts of 40dia x 2000/1500mm long with nuts and washers HOOD 700mm x 3 15mm thick with nuts and bolts for chimney Ladder M S pipe of 32 dia. foot steps-25mm dia pipe x 350 mm long Up to chimney plot form chimney ladder support 40 x 40 x 6 mm angle, hand rail -25NB MS pipe support 25 NB MS pipe, plat form for pollution checkpoint Frame-40 x40 x 6mm angle. Bottom stiffeners-600 mm long straight supports on platform-600 mm long, chequared plate-1600 dia x 6mm thick. complete with all lead and lift as per the direction of engineer in charge | Set | 1470000.0 | 1470000.0 | 2.0 | False | None | None | False | None | False | 2940000.0 | 0 |
| 3045848 | 102965 | None | code159 | Transportation: Loading and unloading charges at factory and site and transport charges of all equipment connected to furnace. complete with all lead and lift as per the direction of engineer in charge | LS | 100000.0 | 100000.0 | 2.0 | False | None | None | False | None | False | 200000.0 | 0 |