createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1710566348987 version 6 createdDate None modifiedDate None tenderType RFQ evaluationType ONE_COVER evaluationTypeText One Cover invitingStrategy RESERVED invitingStrategyText Reserved taxType INCLUSIVE_TAX tenderFee 1040.00 emd 84000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 25-03-2024 16:00:00 tenderQueryClose 22-03-2024 16:52:14 technicalBidOpen None publishedDate 16-03-2024 14:11:04 publishedByPost PWD_EE_DIV_HSPT publishedByUser KPE10175 - RAVINDRA R KATTI bidValidityPeriod 90 noOfCalls 2 preBidMeetingDate None preBidMeetingYn False preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn True percentageRateTypeText None contactPerson Executive Engineer splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 080394200231 mobileNumber None tenderSupplierList None
tenderSchedule	createdTs 1710566348990 version 13 createdDate None modifiedDate None tenderNumber PWD/2023-24/BD/WORK_INDENT9545/CALL-2 title Construction of 10th Anganawadi kendra Building at Hosapete city in 24th Ward ,(Sirsinakallu) and 1st Anganawadi kendra Building in 20th Ward at Hosapete City in Hosapete Taluk, Vijayanagara District(RESERVED FOR ST CATOGERY) description Construction of 10th Anganawadi kendra Building at Hosapete city in 24th Ward ,(Sirsinakallu) and 1st Anganawadi kendra Building in 20th Ward at Hosapete City in Hosapete Taluk, Vijayanagara District(RESERVED FOR ST CATOGERY) category WORKS categoryText Works ecv 4153074.63 deptName Public Works Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 1694 locationName PWD Division Office Hosapete provisionalAmount 4956000.0 groupOverheadTotal 0.0 fileNumber AEE/PWD/HPT/KKRDB/MACROMEGHA/2022-23
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1710566349000 0 None None Buildings Construction of 10th Anganawadi kendra Building at Hosapete city in 24th Ward ,(Sirsinakallu) Hosapete Taluk, Vijayanagara District(SCP)-Ground Floor 1005297.89 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3114709 107030 None 1.12 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work (SR 2023-24 Item No : 1.12, Page No : 8 Vol 1) Cum 99.75 99.75 22.33 False None None False None False 2227.4175 0 3114710 107030 None 1.14.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m ( SR 2023-24 / Item No : 1.14.1 , Page No : 8 Vol 1) Cum 107.1 107.1 62.49 False None None False None False 6692.679 0 3114711 107030 None 2.1.3 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates (The cost of steel reinforcement & formwork shall be paid separately) ( SR 2023-24 / Item No : 2.1.3 , Page No : 15 Vol 1) Cum 6288.45 6288.45 8.1 False None None False None False 50936.445 0 3114712 107030 None 2.2.1 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ( SR 2023-24 , Item No : 2.2.1 , Page No : 15 , Vol 1) Cum 6601.35 6601.35 11.0 False None None False None False 72614.85 0 3114713 107030 None addendum I Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24, Appendix 1 , Page No : 111 , Vol 1 . ) Percentage on finished rate of concrete per m3 Cum 528.11 528.11 5.83 False None None False None False 3078.8813 0 3114714 107030 None addendum I Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24 , Appendix 1 , Page No : 111 , Vol 1 . ) Percentage on finished rate of concrete per m3 COLUMN Cum 4620.95 4620.95 1.82 False None None False None False 8410.129 0 3114715 107030 None addedum I Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24 , Appendix 1 , Page No : 111 , Vol 1 . ) Percentage on finished rate of concrete per m3-Plingth Beam Cum 3300.68 3300.68 3.35 False None None False None False 11057.278 0 3114716 107030 None 5.1.1 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand) ( SR 2023-24 / Item No : 5.1.1 , Page No :9 Vol 2) Cum 5891.55 5891.55 16.19 False None None False None False 95384.1945 0 3114717 107030 None 5.4 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)( SR 2023-24 , Item No : 5.4 , Page No : 9 , Vol 2 ) Cum 6708.45 6708.45 14.88 False None None False None False 99821.736 0 3114718 107030 None 8.19.1 Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge. ( (COMMON SR 2023-24,Vol-1 SL.No 8.19.1 , P. No. 44) Sqm 267.75 267.75 17.26 False None None False None False 4621.365 0 3114719 107030 None 2.11a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Building ( (COMMON SR 2023-24,Vol-1 SL.No2. 11a , P. No. 18) Tonne 93929.85 93929.85 0.9 False None None False None False 84536.865 0 3114720 107030 None 1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. (COMMON SR 2023-24,Vol-1 SL.No. 1.9, P. No. 7) Cum 279.3 279.3 34.85 False None None False None False 9733.605 0 3114721 107030 None 1.8 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. (COMMON SR 2023-24, Vol-1, SI.No.1.8, P.No - 7) Cum 497.7 497.7 13.99 False None None False None False 6962.823 0 3114722 107030 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ( SR 2023-24 , Item No : 2.5.1 , Page No : 16 , Vol 1 ) Cum 6961.5 6961.5 21.65 False None None False None False 150716.475 0 3114723 107030 None addendum I Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24 , Appendix 1 , Page No : 111 , Vol 1 . ) Percentage on finished rate of concrete per m3 Cum 4873.05 4873.05 2.52 False None None False None False 12280.086 0 3114724 107030 None addendum I Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24 , Appendix 1 , Page No : 111 , Vol 1 . ) Percentage on finished rate of concrete per m3 Lintel Cum 4176.9 4176.9 1.5 False None None False None False 6265.35 0 3114725 107030 None addendum I Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24 , Appendix 1 , Page No : 111 , Vol 1 . ) Percentage on finished rate of concrete per m3 -Chejja Cum 3132.68 3132.68 1.08 False None None False None False 3383.2944 0 3114726 107030 None addendum I Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24 , Appendix 1 , Page No : 111 , Vol 1 . ) Percentage on finished rate of concrete per m3-Roof Beam Cum 4176.9 4176.9 4.32 False None None False None False 18044.208 0 3114727 107030 None addendum I Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24 , Appendix 1 , Page No : 111 , Vol 1 . ) Percentage on finished rate of concrete per m3- Slab Cum 3480.75 3480.75 11.23 False None None False None False 39088.8225 0 3114728 107030 None 2.1.3 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates (The cost of steel reinforcement & formwork shall be paid separately) ( SR 2023-24 / Item No : 2.1.3 , Page No : 15 Vol 1) Cum 6288.45 6288.45 7.1 False None None False None False 44647.995 0 3114729 107030 None 2.11a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Building ( (COMMON SR 2023-24,Vol-1 SL.No2.11a , P. No. 18) Tonne 93929.85 93929.85 2.14 False None None False None False 201009.879 0 3114730 107030 None 12.90 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) (PWD SR 2023-24 Item no 12.90 Vol-II Page no 110 ) Sqm 7070.7 7070.7 8.64 False None None False None False 61090.848 0 3114731 107030 None 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) (PWD SR 2023-24 Item no 12.85 Vol-II Page no 109 Sqm 6004.95 6004.95 0.54 False None None False None False 3242.673 0 3114732 107030 None 8.54 Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge & MoRTH specification 804 (COMMON SR 2023-24, Vol-3 ,l.No.8.54 ,P.No - 78) Each 9450.0 9450.0 1.0 False None None False None False 9450.0 0 1710566349000 0 None None Buildings Construction of 10th Anganawadi kendra Building at Hosapete city in 24th Ward ,(Sirsinakallu) Hosapete Taluk, Vijayanagara District(TSP)-Ground Floor 283648.85 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3114733 107031 None 6.6 Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cement mortar 1:6 (1 cement : 6 coarse sand) With Modular bricks including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.(PWD SR 2023-24 Item no 6.6 Vol-II Page no 13) Cum 12205.2 12205.2 23.24 False None None False None False 283648.848 0 1710566349000 0 None None Buildings Construction of 10th Anganawadi kendra Building at Hosapete city in 24th Ward ,(Sirsinakallu) Hosapete Taluk, Vijayanagara District(General)-Ground Floor 907404.26 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3114734 107032 None 12.11 Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications.(PWD SR 2022-23 Item no 12.11 Vol-II Page no 99 ) Cum 144977.7 144977.7 0.43 False None None False None False 62340.411 0 3114735 107032 None 1.120 Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures ) (PWD SR 2023-24 Item no 12.20 Vol-II Page no 100 ) Sqm 6457.5 6457.5 11.34 False None None False None False 73228.05 0 3114736 107032 None 12.83.2 Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance) with wall thickness 2.0mm, Corners of the door frame to be joinedwith galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hingeside vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mmwall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge 42x50 mm PVC Extruded section (PWD SR 2023-24 Item no 12.83.2 Vol II Page no 108 ) m 250.95 250.95 11.4 False None None False None False 2860.83 0 3114737 107032 None 12.55 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges -do with both side prelam.(PWD SR 2023-24 Item no 12.55.1 Vol-II Page no 104 ) Sqm 2484.3 2484.3 3.15 False None None False None False 7825.545 0 3114738 107032 None 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications(PWD SR 202324 Item no 12.51 Vol-II Page no 104 ) No 1066.8 1066.8 7.0 False None None False None False 7467.6 0 3114739 107032 None 12.52 Fixing of window frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debries with lead upto 50 m. including cost of materials, labour charges, complete as per specifications(PWD SR 2023-24 Item no 12.52 Vol-II Page no 104 ) No 811.65 811.65 8.0 False None None False None False 6493.2 0 3114740 107032 None 12.62 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete( SR 2023-24 , Vol-2, Page No : 105, Item No : 12.62 ) No 248.85 248.85 14.0 False None None False None False 3483.9 0 3114741 107032 None 12.76.4 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 100x10mm( SR 2023-24 , Vol-2, Page No : 107, Item No : 12.76.4 ) Nos. 206.85 206.85 14.0 False None None False None False 2895.9 0 3114742 107032 None 12.74.2 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 100x58x1.90mm( SR 2023-24 , Vol-2, Page No : 108, Item No : 12.74.2) Nos. 95.55 95.55 21.0 False None None False None False 2006.55 0 3114743 107032 None 12.61 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete.( SR 2023-24 , Vol-2, Page No : 105, Item No : 12.61) Nos. 1039.5 1039.5 3.0 False None None False None False 3118.5 0 3114744 107032 None 11.34a Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding( SR 2023-24 , Item No : 11.34A, Page No : 86 , Vol 2 ) Kg 176.4 176.4 192.78 False None None False None False 34006.392 0 3114745 107032 None 8.6.1 Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24 Item No.8.6.1, Page No.42 Vol 2) Sqm 339.15 339.15 209.1 False None None False None False 70916.265 0 3114746 107032 None 8.10 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24 Item No.8.10, Page No.43 Vol 2) Sqm 221.55 221.55 41.49 False None None False None False 9192.1095 0 3114747 107032 None 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge (PWD SR 2023-24 Item No.8.8, Page No.42 Vol 2) Sqm 389.55 389.55 77.94 False None None False None False 30361.527 0 3114748 107032 None 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. (PWD SR 2023-24 Item No.8.51, Page No.50 Vol 2) Sqm 105.0 105.0 250.6 False None None False None False 26313.0 0 3114749 107032 None 8.30 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24 Item No.8.30, Page No.46 Vol 2) Sqm 182.7 182.7 77.54 False None None False None False 14166.558 0 3114750 107032 None 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer- in charge. (PWD SR 2023-24 Item No.8.39., Page No.48 Vol 2) Sqm 133.35 133.35 250.6 False None None False None False 33417.51 0 3114751 107032 None 8.28 Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD SR 2023-24 Item No.8.28, Page No.45 Vol 2) Sqm 93.45 93.45 86.18 False None None False None False 8053.521 0 3114752 107032 None 8.41 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24 Item No.8.41, Page No.48 vol 2) Sqm 175.35 175.35 9.18 False None None False None False 1609.713 0 3114753 107032 None 9.22.2 Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately)Size of Tile 600x600 mm (PWD SR 2023-24 Item No 9.22.2, Page No.62 vol 2) Sqm 1392.3 1392.3 41.72 False None None False None False 58086.756 0 3114754 107032 None 9.10 Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2 including pointing in white cement mixed with pigment of matching shade complete (PWD SR 2023-24 Item No 9.10, Page No.60 vol 2) Sqm 1161.3 1161.3 9.84 False None None False None False 11427.192 0 3114755 107032 None 10.14 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg/m2, including pointing in white cement mixed with pigment of matching shade complete. (PWD SR 2023-24 Item No.10.14, Page No.71 vol 2) Sqm 1161.3 1161.3 2.7 False None None False None False 3135.51 0 3114756 107032 None 9.38 Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. (PWD SR 2023-24 Item No.9.38, Page No.65 vol 2) Sqm 1461.6 1461.6 23.85 False None None False None False 34859.16 0 3114757 107032 None 9.24 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.(PWD SR 2023-24 Item No.9.24, Page No.63 vol 2) ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent Sqm 2994.6 2994.6 6.45 False None None False None False 19315.17 0 3114758 107032 None 8.49 Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge PWD SR. 2023-24/ Pg- 49 I No.8.49 Rs.4.00/cm cm 4.2 4.2 7200.0 False None None False None False 30240.0 0 3114759 107032 None 11.26.1 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineerin-Charge. PWD SR. 2023-24/ Pg- 82 I No.11.26.1 Vol 2 Kg 144.9 144.9 50.0 False None None False None False 7245.0 0 3114760 107032 None 10.10.2 Providing and fixing in wall lining flat pressed three layer (medium den sity) particle board or graded wood Pre-laminated one side decorative lamination and other side balancing lamination Grade I, Type II, IS : 12823 marked, including priming coat on unexposed arrangement and screws etc. complete :. PWD SR. 2023-24/ Pg- 70 I No.10.10.2 Vol 2 Sqm 1393.35 1393.35 2.0 False None None False None False 2786.7 0 3114761 107032 None 13.31.1 WATER SUPPLY AND SANITARY WORKS: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as 15 mm nominal dia Pipes ( SR 2023-24 / Item No : 13.31.1 , Page No 122 : Vol 2 ) m 191.1 191.1 80.0 False None None False None False 15288.0 0 3114762 107032 None 13.31.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as 20 mm nominal dia Pipes( SR 2023-24 / Item No : 13.31.2 , Page No 122 : Vol 2 ) m 254.1 254.1 75.0 False None None False None False 19057.5 0 3114763 107032 None 13.34 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank ( SR 2023-24 / Item No : 13.34 , Page No : 123 Vol 2 ) Ltr 9.45 9.45 2000.0 False None None False None False 18900.0 0 3114764 107032 None 13.2.1 Providing and fixing brass bib cock of approved quality : 15 mm nominal bore( SR 2023-24 / Item No : 13.2.1 , Page No : 117 Vol 2 ) No 300.3 300.3 12.0 False None None False None False 3603.6 0 3114765 107032 None 10.1.3 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete for PVC pipes 50mm dia 6kg/sq cm& Class 5(comman SR 2023-24 Sl No 10.1.3 P.No 113) m 106.05 106.05 55.0 False None None False None False 5832.75 0 3114766 107032 None 10.1.7 PVC pipes 110mm dia. 6 kg/sqcm & class 3 (COMMON SR 23-24,Vol-5 SL.No. 10.1.7, P. No. 113) m 431.55 431.55 55.0 False None None False None False 23735.25 0 3114767 107032 None 16.90 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover (COMMON SR 23-24,Vol-5 Item No. 16.90, P. No. 191) No 5726.7 5726.7 6.0 False None None False None False 34360.2 0 3114768 107032 None 9.27 Providing and laying flooring with burnt stone slabs 10 cms thick rough chistle dressed on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3, , including cost of materials, mortar, labour, curing complete as per pecifications PWD DSR.2023-24/V-2, Pg-63 I No .9.27 Sqm 2507.4 2507.4 5.25 False None None False None False 13163.85 0 3114769 107032 None 14.1.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:PWD SR. 2023-24/ Pg- 131 I No.14.1.1 Nos 5128.2 5128.2 2.0 False None None False None False 10256.4 0 3114770 107032 None 13.3.2 Providing and fixing brass stop cock of approved quality :20 mm nominal bore (COMMON SR 23-24,Vol-2 Item No. 13.3.2, P. No. 117) Nos. 320.25 320.25 6.0 False None None False None False 1921.5 0 3114771 107032 None 14.2.1 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid (COMMON SR 23-24,Vol-2 Item No. 14.2.1, P. No. 131) No 5079.9 5079.9 2.0 False None None False None False 10159.8 0 3114772 107032 None 14.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps (COMMON SR 23-24,Vol-2 Item No. 14.7.1, P. No. 132) No 3236.1 3236.1 3.0 False None None False None False 9708.3 0 3114773 107032 None 14.3.1 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete (COMMON SR 23-24,Vol-2 Item No. 14.3.1, P. No. 136) Nos. 1281.0 1281.0 2.0 False None None False None False 2562.0 0 3114774 107032 None 13.40.1 Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments 2 HP, Size 65x50 Head 13M, Discharge 462 LPM (PWD SR. 2023-24/ Pg-No 157 Item No.13.40.1 Vol 2) Nos. 16391.0 16391.0 2.0 False None None False None False 32782.0 0 3114775 107032 None 1.2.1 ELECTRICAL SUPPLY WORKS: Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 19 or 20mm dia with 2mm thick( PWD SR 2023-24 Vol 6, Page No 2 ) m 69.3 69.3 100.0 False None None False None False 6930.0 0 3114776 107032 None 1.2.2 25 mm dia 2 mm thick PVC Conduit Pipes(PWD SR 2023-24 VOL 6 Page o 2) m 81.9 81.9 100.0 False None None False None False 8190.0 0 3114777 107032 None 1.4.1 Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc 75X75X65 mm(PWD SR 23-24 VOL 6 Page No 2) Each 111.3 111.3 20.0 False None None False None False 2226.0 0 3114778 107032 None 1.5.2 Supplying and fixing PVC/metal conduit Deep junction box 25 mm deep Junction box(PWD SR 23-24 VOL 6 Page No 3) Each 58.8 58.8 27.0 False None None False None False 1587.6 0 3114779 107032 None 1.7.1 Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete.upto 50 mm conduit in brick wall (PWD SR 23-24 VOL 6 Page No 3) m 30.45 30.45 160.0 False None None False None False 4872.0 0 3114780 107032 None 1.13 Supplying And Fixing Metal Fan Box with Round Hook (PWD SR 23-24 VOL 6 Page No 4) Each 122.85 122.85 12.0 False None None False None False 1474.2 0 3114781 107032 None 12.45 Supplying and fixing 230 volts 20/40 Wats flourecent lamp holder (PWD SR 23-24 VOL 6 Page No 52) Each 34.65 34.65 20.0 False None None False None False 693.0 0 3114782 107032 None 2.3.4 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:20104 mm Sq mm (PWD SR 23-24 VOL 6 Page No 5) m 44.1 44.1 110.0 False None None False None False 4851.0 0 3114783 107032 None 3.5.1 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box 1 to 2 Module (PWD SR 23-24 VOL 6 Page No 8) Each 143.85 143.85 22.0 False None None False None False 3164.7 0 3114784 107032 None 3.5.2 3module (PWD SR 23-24 VOL 6 Page No 8) Each 169.05 169.05 20.0 False None None False None False 3381.0 0 3114785 107032 None 3.6.1 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6A one way switch Each 107.1 107.1 55.0 False None None False None False 5890.5 0 3114786 107032 None 3.6.2 6A two way Switch (PWD SR 23-24 VOL 6 Page No 9) Each 174.3 174.3 10.0 False None None False None False 1743.0 0 3114787 107032 None 3.6.4 Stepped Fan Regulator two Module (PWD SR 23-24 VOL 6 Page No 9) Each 374.85 374.85 8.0 False None None False None False 2998.8 0 3114788 107032 None 3.6.9 32A DP Switch (PWD SR 23-24 VOL 6 Page No 9) Each 342.3 342.3 4.0 False None None False None False 1369.2 0 3114789 107032 None 3.7 Supplying and fixing 32A security and energy saving DP switch with key tag suitable to operate on 230 V, 50Hz AC supply & completely wired on existing box(PWD SR 23-24 VOL 6 Page No 9) Each 678.3 678.3 4.0 False None None False None False 2713.2 0 3114790 107032 None 5.7.2 Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers 32 A(PWD SR 23-24 VOL 6 Page No 14) Each 253.05 253.05 6.0 False None None False None False 1518.3 0 3114791 107032 None 6.3.1 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system 48" Sweep (1200 mm) Regular model (PWD SR 23-24 VOL 6 Page No 30) Each 3133.2 3133.2 6.0 False None None False None False 18799.2 0 3114792 107032 None 11.3.2 Supplying of .feet -PVC Batten with integrated LED tube . W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition LED light fitting 1 x 4'-20 22 W (PWD SR 23-24 VOL 6 Page No 43) Each 724.5 724.5 10.0 False None None False None False 7245.0 0 3114793 107032 None 12.21 Supplying and fixing of 5'-80 W of T8 Fluorescent Tube with 54W power consumption with low 3mg Mercury content less phosphor coating Operating voltage range from 180V to 265V, 50Hz AC power Supply (PWD SR 23-24 VOL 6 Page No 50) Each 546.0 546.0 5.0 False None None False None False 2730.0 0 3114794 107032 None 12.25.2 Supplying of patty fitting, made out of CRCA Sheet metal body with locking type holder completely wired with HF Electronic Ballast, Operating voltage range from 180V to 265V, 50Hz AC power supply excluding Tube.(PWD SR 23-24 VOL 6 Page No 50) Each 357.0 357.0 6.0 False None None False None False 2142.0 0 3114795 107032 None 5.17.4 Supplying and fixing miniature circuit breakers on existingMCB distribution boards using necessary fixing materialsand 'C' Type curve, indicator ON/OFF, energy cross-3 withShort circuit breaking capacity of 10K and complete wiringas required confirming to IEC 60898.(PWD SR 23-24 VOL 6 ) Each 775.95 775.95 5.0 False None None False None False 3879.75 0 3114796 107032 None 5.1.04 Rod type of earthing using 40 mm Dia, 3 Mtr long MS rod as ground rod, in earth pit of 300 mm width and 3300 mm depth and using 50x6 mm flat welded to ground rod as terminal & connected to equipment ground terminal using PVC Al wire as specifie PWD EL SR. 2023-24 / Pg-23 I No.5.1.04 Each 2280.6 2280.6 2.0 False None None False None False 4561.2 0 3114797 107032 None 11.16.2 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (PWD SR. 2023-24/ Pg-No 82 Item No.11.16.2 Vol 2) Kg 154.35 154.35 100.0 False None None False None False 15435.0 0 3114798 107032 None 8.16.3 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment(PWD SR. 2023-24/ Pg-No 43 Item No.8.16.3 Vol 2) m 46.2 46.2 100.0 False None None False None False 4620.0 0 3114799 107032 None 15.11 Providing and Applying CFTRI approved two component flexible polymer modified acrylic cementitious waterproofing coating with a mix ratio of (1 Liquid: 2 Powder), to the RCC surface like bathroom, toilet, balcony & utility area applied 1.7kg/m2 in 2 coats to achieve 1mm DFT, having Elongation at break 50% as per ASTM D 412, Tensile strength 1N/ mm2 as per ASTM D 412, Adhesion strength: 0.80 N/mm2 as per ASTM D 4541, crack bridging upto 1mm as per ASTM C 836, Water penetration (5 bar pressure) as per BS EN 12390. The finished cost to include surface preparation, making coving of 50 mm 50mm at all right angles of wall Junction with Polymer Repair Mortar and lay 45 gsm glass fibre mesh over the angle fillet when the first coat in still wet, treatment of cracks completely as per specification.(PWD SR. 2023-24/ Pg-No 151 Item No.15.11 Vol 2) Sqm 385.35 385.35 50.0 False None None False None False 19267.5 0 3114800 107032 None 4.1 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications ( SR 2023-24 / Item No : 4.1 , Page No :5 Vol 2 ) Sqm 123.9 123.9 56.0 False None None False None False 6938.4 0 1710566349000 0 None None Buildings Construction of 1st Anganawadi kendra Building at Hosapete city in 20th Ward , Hosapete Taluk, Vijayanagara District(General)-Ground Floor 1294333.52 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3114801 107033 None 1.12 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. ( SR 2023-24 / Item No : 1.12 , Page No : 8 Vol 1 ) Cum 99.75 99.75 8.63 False None None False None False 860.8425 0 3114802 107033 None 1.14.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m ( SR 2023-24 / Item No : 1.14.1 , Page No : 8 Vol 1 ) Cum 107.1 107.1 48.23 False None None False None False 5165.433 0 3114803 107033 None 2.1.3 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates (The cost of steel reinforcement & formwork shall be paid separately) ( SR 2023-24 / Item No : 2.1.3 , Page No : 15 Vol 1) Cum 6288.45 6288.45 6.8 False None None False None False 42761.46 0 3114804 107033 None 2.2.1 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ( SR 2023-24 , Item No : 2.2.1 , Page No : 15 , Vol 1 ) Cum 6601.35 6601.35 13.33 False None None False None False 87995.9955 0 3114805 107033 None addendum I Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24, Appendix 1 , Page No : 111 , Vol 1 . ) Percentage on finished rate of concrete per m3 Footing Column Cum 528.11 528.11 5.48 False None None False None False 2894.0428 0 3114806 107033 None addendum I Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24, Appendix 1 , Page No : 111 , Vol 1 . ) Percentage on finished rate of concrete per m3-Column Cum 4620.95 4620.95 1.61 False None None False None False 7439.7295 0 3114807 107033 None addendum I Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24, Appendix 1 , Page No : 111 , Vol 1 . ) Percentage on finished rate of concrete per m3-Pligth Beam Cum 3300.68 3300.68 1.88 False None None False None False 6205.2784 0 3114808 107033 None addendum I Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24, Appendix 1 , Page No : 111 , Vol 1 . ) Percentage on finished rate of concrete per m3-Box Drain Sub Structure Cum 330.07 330.07 1.2 False None None False None False 396.084 0 3114809 107033 None addendum I Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24, Appendix 1 , Page No : 111 , Vol 1 . ) Percentage on finished rate of concrete per m3-Drain Walls Cum 2310.48 2310.48 2.16 False None None False None False 4990.6368 0 3114810 107033 None 5.1.1 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand) ( SR 2023-24 / Item No : 5.1.1 , Page No :9 Vol 2) Cum 5891.55 5891.55 9.41 False None None False None False 55439.4855 0 3114811 107033 None 5.4 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)( SR 2023-24 , Item No : 5.4 , Page No : 9 , Vol 2 ) Cum 6708.45 6708.45 7.26 False None None False None False 48703.347 0 3114812 107033 None 8.19.1 Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge. ( (COMMON SR 2023-24,Vol-1 SL.No 8.19.1 , P. No. 44) Sqm 267.75 267.75 27.02 False None None False None False 7234.605 0 3114813 107033 None 2.11a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Building ( (COMMON SR 2023-24,Vol-1 SL.No2.11a , P. No. 18) Tonne 93929.85 93929.85 0.93 False None None False None False 87354.7605 0 3114814 107033 None 1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. (COMMON SR 2023-24,Vol-1 SL.No. 1.9, P. No. 7) Cum 279.3 279.3 16.37 False None None False None False 4572.141 0 3114815 107033 None 1.8 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. (COMMON SR 2023-24, Vol-1, SI.No.1.8, P.No - 7) Cum 497.7 497.7 19.06 False None None False None False 9486.162 0 3114816 107033 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ( SR 2023-24 , Item No : 2.5.1 , Page No : 16 , Vol 1 ) Cum 6961.5 6961.5 16.46 False None None False None False 114586.29 0 3114817 107033 None addendum I Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24 , Appendix 1 , Page No : 111 , Vol 1 . ) Percentage on finished rate of concrete per m3-Colums Cum 4873.05 4873.05 2.55 False None None False None False 12426.2775 0 3114818 107033 None addendum I Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24 , Appendix 1 , Page No : 111 , Vol 1 . ) Percentage on finished rate of concrete per m3-Lintel Cum 4176.9 4176.9 0.94 False None None False None False 3926.286 0 3114819 107033 None addendum I Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24 , Appendix 1 , Page No : 111 , Vol 1 . ) Percentage on finished rate of concrete per m3-Chejja Cum 3132.68 3132.68 0.51 False None None False None False 1597.6668 0 3114820 107033 None addendum I Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24 , Appendix 1 , Page No : 111 , Vol 1 . ) Percentage on finished rate of concrete per m3-Roof Beam Cum 4176.9 4176.9 3.11 False None None False None False 12990.159 0 3114821 107033 None addendum I Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24 , Appendix 1 , Page No : 111 , Vol 1 . ) Percentage on finished rate of concrete per m3-Stair Case Cum 3132.68 3132.68 1.99 False None None False None False 6234.0332 0 3114822 107033 None addendum I Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24 , Appendix 1 , Page No : 111 , Vol 1 . ) Percentage on finished rate of concrete per m3-Slab Cum 3480.75 3480.75 7.15 False None None False None False 24887.3625 0 3114823 107033 None 2.1.3 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates (The cost of steel reinforcement & formwork shall be paid separately) ( SR 2023-24 / Item No : 2.1.3 , Page No : 15 Vol 1) Cum 6288.45 6288.45 7.51 False None None False None False 47226.2595 0 3114824 107033 None 2.11a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Building ( (COMMON SR 2023-24,Vol-1 SL.No2.11a , P. No. 18) Tonne 93929.85 93929.85 1.67 False None None False None False 156862.8495 0 3114825 107033 None 6.6 Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cement mortar 1:6 (1 cement : 6 coarse sand) With Modular bricks including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.(PWD SR 2023-24 Item no 6.6 Vol-II Page no 13) Cum 12205.2 12205.2 14.51 False None None False None False 177097.452 0 3114826 107033 None 12.90 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) (PWD SR 2023-24 Item no 12.90 Vol-II Page no 110 ) Sqm 7070.7 7070.7 5.4 False None None False None False 38181.78 0 3114827 107033 None 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) (PWD SR 2023-24 Item no 12.85 Vol-II Page no 109 ) Sqm 6004.95 6004.95 1.08 False None None False None False 6485.346 0 3114828 107033 None 12.11 Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications.(PWD SR 2022-23 Item no 12.11 Vol-II Page no 99 ) Cum 144977.7 144977.7 0.1 False None None False None False 14497.77 0 3114829 107033 None 12.20 Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures ) (PWD SR 2023-24 Item no 12.20 Vol-II Page no 100 ) Sqm 6457.5 6457.5 2.52 False None None False None False 16272.9 0 3114830 107033 None 12.83.2 Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance 1mm), with wall thickness 2.0 mm (0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge. 42x50 mm PVC Extruded section (PWD SR 2023-24 Item no 12.83.2 Vol-II Page no 108 ) m 250.95 250.95 5.7 False None None False None False 1430.415 0 3114831 107033 None 12.55.1 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges -do with both side prelam.(PWD SR 2023-24 Item no 12.55.1 Vol-II Page no 104 ) Sqm 2484.3 2484.3 1.58 False None None False None False 3925.194 0 3114832 107033 None 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications(PWD SR 202324 Item no 12.51 Vol-II Page no 104 ) Nos 1066.8 1066.8 2.0 False None None False None False 2133.6 0 3114833 107033 None 12.52 Fixing of window frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debries with lead upto 50 m. including cost of materials, labour charges, complete as per specifications(PWD SR 2023-24 Item no 12.52 Vol-II Page no 104 ) Nos. 811.65 811.65 6.0 False None None False None False 4869.9 0 3114834 107033 None 12.62 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete( SR 2023-24 , Vol-2, Page No : 105, Item No : 12.62 ) Nos 248.85 248.85 4.0 False None None False None False 995.4 0 3114835 107033 None 12.76.4 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 100x10mm( SR 2023-24 , Vol-2, Page No : 107, Item No : 12.76.4 ) Nos 206.85 206.85 4.0 False None None False None False 827.4 0 3114836 107033 None 12.74.2 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 100x58x1.90mm( SR 2023-24 , Vol-2, Page No : 108, Item No : 12.74.2) Nos 95.55 95.55 6.0 False None None False None False 573.3 0 3114837 107033 None 12.61 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete.( SR 2023-24 , Vol-2, Page No : 105, Item No : 12.61) Nos 1039.5 1039.5 2.0 False None None False None False 2079.0 0 3114838 107033 None 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding( SR 2023-24 , Item No : 11.34A, Page No : 86 , Vol 2 ) Kg 176.4 176.4 136.08 False None None False None False 24004.512 0 3114839 107033 None 8.6.1 Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24 Item No.8.6.1, Page No.42 Vol 2) Sqm 339.15 339.15 95.19 False None None False None False 32283.6885 0 3114840 107033 None 8.10 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24 Item No.8.10, Page No.43 Vol 2) Sqm 221.55 221.55 23.84 False None None False None False 5281.752 0 3114841 107033 None 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge (PWD SR 2023-24 Item No.8.8, Page No.42 Vol 2) Sqm 389.55 389.55 65.32 False None None False None False 25445.406 0 3114842 107033 None 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. (PWD SR 2023-24 Item No.8.51, Page No.50 Vol 2) Sqm 105.0 105.0 119.02 False None None False None False 12497.1 0 3114843 107033 None 8.30 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24 Item No.8.30, Page No.46 Vol 2) Sqm 182.7 182.7 65.32 False None None False None False 11933.964 0 3114844 107033 None 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer- in charge. (PWD SR 2023-24 Item No.8.39., Page No.48 Vol 2) Sqm 133.35 133.35 119.02 False None None False None False 15871.317 0 3114845 107033 None 8.28 Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD SR 2023-24 Item No.8.28, Page No.45 Vol 2) Sqm 93.45 93.45 73.96 False None None False None False 6911.562 0 3114846 107033 None 8.41 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24 Item No.8.41, Page No.48 vol 2) Sqm 175.35 175.35 6.48 False None None False None False 1136.268 0 3114847 107033 None 9.22.2 Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately)Size of Tile 600x600 mm (PWD SR 2023-24 Item No 9.22.2, Page No.62 vol 2) Sqm 1392.3 1392.3 24.22 False None None False None False 33721.506 0 3114848 107033 None 9.10 Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2 including pointing in white cement mixed with pigment of matching shade complete (PWD SR 2023-24 Item No 9.10, Page No.60 vol 2) Sqm 1161.3 1161.3 3.0 False None None False None False 3483.9 0 3114849 107033 None 9.38 Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. (PWD SR 2023-24 Item No.9.38, Page No.65 vol 2) Sqm 1461.6 1461.6 9.98 False None None False None False 14586.768 0 3114850 107033 None 9.24 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.(PWD SR 2023-24 Item No.9.24, Page No.63 vol 2) ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent Sqm 2994.6 2994.6 2.7 False None None False None False 8085.42 0 3114851 107033 None 8.49 Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge PWD SR. 2023-24/ Pg- 49 I No.8.49 cm 4.2 4.2 7200.0 False None None False None False 30240.0 0 3114852 107033 None 11.26.1 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineerin-Charge. PWD SR. 2023-24/ Pg- 82 I No.11.26.1 Vol 2 Kg 144.9 144.9 150.0 False None None False None False 21735.0 0 3114853 107033 None 8.54 Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge & MoRTH specification 804 (COMMON SR 2023-24, Vol-3 ,l.No.8.54 ,P.No - 78) Each 9450.0 9450.0 1.0 False None None False None False 9450.0 0 3114854 107033 None 10.10.2 Providing and fixing in wall lining flat pressed three layer (medium den sity) particle board or graded wood Pre-laminated one side decorative lamination and other side balancing lamination Grade I, Type II, IS : 12823 marked, including priming coat on unexposed arrangement and screws etc. complete :. PWD SR. 2023-24/ Pg- 70 I No.10.10.2 Vol 2 Sqm 1393.35 1393.35 2.0 False None None False None False 2786.7 0 3114855 107033 None 8.16..3 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment(PWD SR. 2023-24/ Pg-No 43 Item No.8.16.3 Vol 2) m 46.2 46.2 150.0 False None None False None False 6930.0 0 3114856 107033 None 4.1 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications ( SR 2023-24 / Item No : 4.1 , Page No :5 Vol 2 ) Sqm 123.9 123.9 40.0 False None None False None False 4956.0 0 3114857 107033 None 4.21 Extra for providing throating or drip moulding to RCC Chejja with plastering (labour charges only) as per specification KSRB4-2.12 page No 15 SR-2018-19 m 34.65 34.65 40.0 False None None False None False 1386.0 0 1710566349000 0 None None Buildings Construction of 1st Anganawadi kendra Building at Hosapete city in 20th Ward , Hosapete Taluk, Vijayanagara District(General)-First Floor 662390.11 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3114858 107034 None 2.5.1 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ( SR 2023-24 , Item No : 2.5.1 , Page No : 16 , Vol 1 ) Cum 7031.12 7031.12 10.49 False None None False None False 73756.4488 0 3114859 107034 None addendum I Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24 , Appendix 1 , Page No : 115 , Vol 1 . ) Percentage on finished rate of concrete per m3-Column Cum 4921.78 4921.78 2.02 False None None False None False 9941.9956 0 3114860 107034 None addendum I Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24 , Appendix 1 , Page No : 111 , Vol 1 . ) Percentage on finished rate of concrete per m3-Lintel Cum 4218.67 4218.67 0.8 False None None False None False 3374.936 0 3114861 107034 None addendum I Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24 , Appendix 1 , Page No : 111 , Vol 1 . ) Percentage on finished rate of concrete per m3-Chejja Cum 3164.0 3164.0 0.68 False None None False None False 2151.52 0 3114862 107034 None addendum I Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24 , Appendix 1 , Page No : 111 , Vol 1 . ) Percentage on finished rate of concrete per m3-Roof Beam Cum 4218.67 4218.67 2.41 False None None False None False 10166.9947 0 3114863 107034 None addendum I Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24 , Appendix 1 , Page No : 111 , Vol 1 . ) Percentage on finished rate of concrete per m3-Slab Cum 3515.56 3515.56 4.58 False None None False None False 16101.2648 0 3114864 107034 None 2.1.3 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates (The cost of steel reinforcement & formwork shall be paid separately) ( SR 2023-24 / Item No : 2.1.3 , Page No : 15 Vol 1) Cum 6351.33 6351.33 1.7 False None None False None False 10797.261 0 3114865 107034 None 2.11a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Building ( (COMMON SR 2023-24,Vol-1 SL.No2.11a , P. No. 18) Tonne 94869.15 94869.15 1.12 False None None False None False 106253.448 0 3114866 107034 None 6.6 Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cement mortar 1:6 (1 cement : 6 coarse sand) With Modular bricks including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.(PWD SR 2023-24 Item no 6.6 Vol-II Page no 13) Cum 12327.25 12327.25 12.91 False None None False None False 159144.7975 0 3114867 107034 None 12.90 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) (PWD SR 2023-24 Item no 12.90 Vol-II Page no 110 ) Sqm 7141.41 7141.41 3.96 False None None False None False 28279.9836 0 3114868 107034 None 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) (PWD SR 2023-24 Item no 12.85 Vol-II Page no 109 ) Sqm 6065.0 6065.0 1.08 False None None False None False 6550.2 0 3114869 107034 None 12.11 Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications.(PWD SR 2022-23 Item no 12.11 Vol-II Page no 99 ) Cum 146427.48 146427.48 0.1 False None None False None False 14642.748 0 3114870 107034 None 12.20 Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures ) (PWD SR 2023-24 Item no 12.20 Vol-II Page no 100 ) Sqm 6522.08 6522.08 2.52 False None None False None False 16435.6416 0 3114871 107034 None 12.83.2 Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance 1mm), with wall thickness 2.0 mm (0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge. 42x50 mm PVC Extruded section (PWD SR 2023-24 Item no 12.83.2 Vol-II Page no 108 ) m 253.46 253.46 5.7 False None None False None False 1444.722 0 3114872 107034 None 12.55.1 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges -do with both side prelam.(PWD SR 2023-24 Item no 12.55.1 Vol-II Page no 104 ) Sqm 2509.14 2509.14 1.58 False None None False None False 3964.4412 0 3114873 107034 None 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications(PWD SR 202324 Item no 12.51 Vol-II Page no 104 ) Nos. 1077.47 1077.47 2.0 False None None False None False 2154.94 0 3114874 107034 None 12.52 Fixing of window frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debries with lead upto 50 m. including cost of materials, labour charges, complete as per specifications(PWD SR 2023-24 Item no 12.52 Vol-II Page no 104 ) Nos. 819.77 819.77 5.0 False None None False None False 4098.85 0 3114875 107034 None 12.62 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete( SR 2023-24 , Vol-2, Page No : 105, Item No : 12.62 ) Nos. 251.34 251.34 4.0 False None None False None False 1005.36 0 3114876 107034 None 12.76.4 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 100x10mm( SR 2023-24 , Vol-2, Page No : 107, Item No : 12.76.4 ) Nos. 208.92 208.92 4.0 False None None False None False 835.68 0 3114877 107034 None 12.74.2 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 100x58x1.90mm( SR 2023-24 , Vol-2, Page No : 108, Item No : 12.74.2) Nos 96.51 96.51 6.0 False None None False None False 579.06 0 3114878 107034 None 12.61 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete.( SR 2023-24 , Vol-2, Page No : 105, Item No : 12.61) Nos. 1049.9 1049.9 2.0 False None None False None False 2099.8 0 3114879 107034 None 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding( SR 2023-24 , Item No : 11.34A, Page No : 86 , Vol 2 ) Kg 178.16 178.16 105.84 False None None False None False 18856.4544 0 3114880 107034 None 8.6.1 Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24 Item No.8.6.1, Page No.42 Vol 2) Sqm 342.54 342.54 70.69 False None None False None False 24214.1526 0 3114881 107034 None 8.10 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24 Item No.8.10, Page No.43 Vol 2) Sqm 223.77 223.77 16.16 False None None False None False 3616.1232 0 3114882 107034 None 8.80 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge (PWD SR 2023-24 Item No.8.8, Page No.42 Vol 2) Sqm 393.45 393.45 71.82 False None None False None False 28257.579 0 3114883 107034 None 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. (PWD SR 2023-24 Item No.8.51, Page No.50 Vol 2) Sqm 106.05 106.05 86.85 False None None False None False 9210.4425 0 3114884 107034 None 8.30 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24 Item No.8.30, Page No.46 Vol 2) Sqm 184.53 184.53 71.82 False None None False None False 13252.9446 0 3114885 107034 None 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer- in charge. (PWD SR 2023-24 Item No.8.39., Page No.48 Vol 2) Sqm 134.68 134.68 86.85 False None None False None False 11696.958 0 3114886 107034 None 8.28 Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD SR 2023-24 Item No.8.28, Page No.45 Vol 2) Sqm 94.38 94.38 80.46 False None None False None False 7593.8148 0 3114887 107034 None 8.41 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR 2023-24 Item No.8.41, Page No.48 vol 2) Sqm 177.1 177.1 5.04 False None None False None False 892.584 0 3114888 107034 None 9.22.2 Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately)Size of Tile 600x600 mm (PWD SR 2023-24 Item No 9.22.2, Page No.62 vol 2) Sqm 1406.22 1406.22 13.81 False None None False None False 19419.8982 0 3114889 107034 None 9.10 Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2 including pointing in white cement mixed with pigment of matching shade complete (PWD SR 2023-24 Item No 9.10, Page No.60 vol 2) Sqm 1172.91 1172.91 4.42 False None None False None False 5184.2622 0 3114890 107034 None 10.14 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg/m2, including pointing in white cement mixed with pigment of matching shade complete. (PWD SR 2023-24 Item No.10.14, Page No.71 vol 2) Sqm 1172.91 1172.91 3.6 False None None False None False 4222.476 0 3114891 107034 None 9.38 Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. (PWD SR 2023-24 Item No.9.38, Page No.65 vol 2) Sqm 1476.22 1476.22 12.25 False None None False None False 18083.695 0 3114892 107034 None 9.24 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.(PWD SR 2023-24 Item No.9.24, Page No.63 vol 2) ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent Sqm 3024.55 3024.55 3.0 False None None False None False 9073.65 0 3114893 107034 None 11.26.1 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineerin-Charge. PWD SR. 2023-24/ Pg- 82 I No.11.26.1 Vol 2 Kg 146.35 146.35 50.0 False None None False None False 7317.5 0 3114894 107034 None 11.16.2 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (PWD SR. 2023-24/ Pg-No 82 Item No.11.16.2 Vol 2) Kg 154.35 154.35 50.0 False None None False None False 7717.5 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1710566349000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1710566349000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1710566349000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1710566349000 0 None None ELIGIBILITY Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs) None 1710566349000 0 None None ELIGIBILITY Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender) None 1710566349000 0 None None ELIGIBILITY Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None 1710566349000 0 None None ELIGIBILITY Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None 1710566349000 0 None None ELIGIBILITY Total value of civl engineering works executed and payments received in the last five years (year-wise) None 1710566349000 0 None None ELIGIBILITY List of existing commitments and ongoing works None 1710566349000 0 None None ELIGIBILITY List of works for which tenders already submitted None 1710566349000 0 None None ELIGIBILITY Banker Details for reference None 1710566349000 0 None None ELIGIBILITY Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded None 1710566349000 0 None None ELIGIBILITY Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years None 1710566349000 0 None None ELIGIBILITY Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded None 1710566349000 0 None None ELIGIBILITY Proposals for subcontracting components of works amounting to more than 20% of the contract price (for each, the qualifications and experience of the identified sub-contractor in the relevant fields should be attached) None 1710566349000 0 None None ELIGIBILITY Conditional tenders will not be accepted. None 1710566349000 0 None None ELIGIBILITY Assessed Tender Capacity shall be more than the Tendered Amount None 1710566349000 0 None None ELIGIBILITY GST Will be Paid Separately to the Executed Quantities None 1710566349000 0 None None ELIGIBILITY The tenderer shall note that, the increase in GST shall not be paid in the extended period of contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time. None 1710566349000 0 None None ELIGIBILITY If the tenderer has quoted below the schedule-B amount the difference amount should be paid in the form of F.D.R / B G / DD in the name of Executive Engineer,PWD Division Hosapete and Upload the scanned copy of the same in e-portal at the time of applying the tender. The Same Scanned copy for Different work will be liable for Rejection and Original DD / FDR / BG should be submitted to this office at before opening of the Bid None 1710566349000 0 None None ELIGIBILITY If the bidder uploaded the false document while participating in the tender, the bidder will be responsible and action will be initiated as per the tender clause. None 1710566349000 0 None None ELIGIBILITY The work should be completed in 09 (Nine) Months ( including monsoon) None 1710566349000 0 None None ELIGIBILITY The deffect liability period is one year from the date of actual completion of work. None 1710566349000 0 None None ELIGIBILITY To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2018-19 2019-20 2020-21 2021-22 & 2022-23 (a) achieved in at least One financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs. 41.53 Lakhs. (Not below the rank of Charterd Accountant) None 1710566349000 0 None None ELIGIBILITY To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2018-19 2019-20 2020-21 2021-22 & 2022-23 (b) satisfactorily completed (at least 25% of the contract value) as prime contractor, any nature of work of Rs.10.38 Lakhs. (Not Below the rank of Executive Engineer) None 1710566349000 0 None None ELIGIBILITY In accordance with the notification of Government of Karnataka No. PDS81PMS/2023, Bengaluru dated 10.10.2023 this work is reserved for Scheduled Tribe contractors, and only Scheduled Tribe contractors shall have to participate in the tender. The Scheduled Tribe contractors participating in the tender should compulsorily furnish the Caste certificate issued by a competent authority, failing which the tender is liable for rejection None 1710566349000 0 None None ELIGIBILITY The schedule Tribe contractor participating in the tender shall be domicile of State of Karnataka for more than 10 (ten) years None
preQualCriterionList	None
technicalCriterionList	None
tenderCriterionDocumentList	documentName optional documentTypeText Registration Certificate True Technical Bid Annual Turnover Certificate Not below the rank of Charterd Accountant True Technical Bid Single Work Done Certificate Not Below the rank of Executive Engineer True Technical Bid GST CERTIFICATE True Technical Bid Less DD / BG / FDR True Technical Bid Principal Place of Business. True Technical Bid Tender Bid Capacity True Technical Bid List of Existing commitments & Ongoing works- Format-5 True Technical Bid List of works for which tenders acceptence letter received-Format-6 True Technical Bid List of works for which tenders already submitted-Format-7 True Technical Bid Reserved Category Certificate True Technical Bid Domacial Certificate True Technical Bid
tenderWorkLocationList
tenderAddress	None
tenderRecallDTO	None