| 1710571184000 | 0 | None | None | Other Works | Installation of new pipes in the inner sewerage pipelines of Nagar Sabha area No.,6,7,10,11,13,14,15,21,22,25,27 and construction of manholes where necessary. | 1918953.03 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3117541 | 107117 | None | NO1 | Dismantling of Flexible pavements and disposal of dismantled materials and stacking serviceable and unserviceable materials separately.By Mechanical Means Bituminous course (P-12, I-2.18,II Aas per CSR 2023-24 Vol-3) ---- manhole work | Cum | 331.66 | 331.66 | 14.7 | False | None | None | False | None | False | 4875.402 | 0 | | 3117542 | 107117 | None | NO2 | Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting andstacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage andother appurtenances required to complete the work Depth exceeding 1.5 m, but not exceeding 3 m (P-6, I-1.5.2as per CSR 2023-24 Vol-1) ---- manhole work | Cum | 458.35 | 458.35 | 344.0 | False | None | None | False | None | False | 157672.4 | 0 | | 3117543 | 107117 | None | NO3 | Supplying UPVC FOAM CORE pipes conforming to IS 16098 P-1 2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead andlifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing) forPipes of SN8 Ring Fit, 160mm dia..(P-114, I-10.3.2as per CSR 2023-24 Vol-5) ---- manhole work | Mtr | 599.46 | 599.46 | 100.0 | False | None | None | False | None | False | 59946.0 | 0 | | 3117544 | 107117 | None | NO4 | Providing and constructing of Machinehole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15m alround the chamber and brick masonry in C.M 1:4 plaster with bricks of approved quality and CM plaster 1:3 proportion 12mm thick inside and outside except for the conical surface outside where the thickness of plaster shall be 20 mm thick, with 1 to 6 slope in the concrete towards the central drain, finished smooth and fixing of pipes in CC 1:2:4 with graded metal of 20 mm and down size including supplying and fixing SFRC Machinehole frame and cover confoming to IS 12592(Part-I): 1988 andIS 12592(Part-II) :1991 with latest amendments in CC 1:2:4, supplying and fixing of plastic foot steps staggered at 30cms apart as directed, watering,curing, barri cading, danger lighting, pouring tar over M.H. frame and cover, cost of tar, shoring, strutting, dewatering, engraving Machinehole No. on the inner and outer conical surface etc. as per the drawing with all lead and lift for various diameters and depths noted below. Constructing Table Moulded Bricks Machinehole 1.2 m internal dia. , 2.0 m depth andHeavy duty SFRC cover andframe(P.No 204, I.No.16.46.2 of KPWD CSR2023-24 Vol 5)-2.00 deep ---- manhole work | Nos | 48519.18 | 48519.18 | 18.0 | False | None | None | False | None | False | 873345.24 | 0 | | 3117545 | 107117 | None | NO5 | Providing and constructing of Machinehole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15m alround the chamber and brick masonry in C.M 1:4 plaster with bricks of approved quality and CM plaster 1:3 proportion 12mm thick inside and outside except for the conical surface outside where the thickness of plaster shall be 20 mm thick, with 1 to 6 slope in the concrete towards the central drain, finished smooth and fixing of pipes in CC 1:2:4 with graded metal of 20 mm and down size including supplying and fixing SFRC Machinehole frame and cover confoming to IS 12592(Part-I): 1988 andIS 12592(Part-II) :1991 with latest amendments in CC 1:2:4, supplying and fixing of plastic footsteps staggered at 30cms apart as directed, watering, curing,barri cading,danger lighting, pouring tar over M.H. frame and cover, cost of tar, shoring, strutting, dewatering, engraving Machinehole No. on the inner and outer conical surface etc. as per the drawing with all lead and lift for various diameters and depths noted below. Constructing Table Moulded Bricks Machinehole 1.2 m internal dia. , 3.0M depth andHeavy duty SFRC cover andframe(P.No 197, I.No.16.46.3 of KPWD CSR2023-24 Vol 5)-2.00 deep ---- manhole work | Nos | 73879.84 | 73879.84 | 2.0 | False | None | None | False | None | False | 147759.68 | 0 | | 3117546 | 107117 | None | NO6 | Providing and constructing of Machinehole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15m alround the chamber and brick masonry in C.M 1:4 plaster with bricks of approved quality and CM plaster 1:3 proportion 12mm thick inside and outside except for the conical surface outside where the thickness of plaster shall be 20 mm thick, with 1 to 6 slope in the concrete towards the central drain, finished smooth and fixing of pipes in CC 1:2:4 with graded metal of 20 mm and down size including supplying and fixing SFRC Machinehole frame and cover confoming to IS 12592(Part-I): 1988 andIS 12592(Part-II) :1991 with latest amendments in CC 1:2:4, supplying and fixing of plastic foot steps staggered at 30cms apart as directed, watering, curing,barri cading,danger lighting, pouring tar over M.H. frame and cover, cost of tar, shoring, strutting, dewatering, engraving Machinehole No. on the inner and outer conical surface etc. as per the drawing with all lead and lift for various diameters and depths noted below.For 1.2m diaConstructing Table Moulded Bricks Machinehole 1.2 m internal dia. , 2.0 m depth andmedium duty SFRC cover andframe(P.No 204, I.No.16.48.4 of KPWD CSR2023-24 Vol 5)-2.00 deep ---- manhole work | Nos | 120902.43 | 120902.43 | 4.0 | False | None | None | False | None | False | 483609.72 | 0 | | 3117547 | 107117 | None | NO7 | KSRB 2-4 : Refilling available earth around pipe lines, cables in layers not exceeding 20cms in depth, compacting each deposited layer by ramming after watering with lead upto 50m. and lift upto 1.5 m. including cost of all labour complete as per specifications.(P.No 7, I.No.1.10 of KPWD CS.R VOL 1) ---- manhole work | Cum | 164.8 | 164.8 | 344.0 | False | None | None | False | None | False | 56691.2 | 0 | | 3117548 | 107117 | None | NO8 | Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usageandall other appurtenaces required to complete the work.(P.No 7 I.No.1.8of C S.R 2023-24,vol-1) ---- manhole work | Cum | 488.22 | 488.22 | 22.88 | False | None | None | False | None | False | 11170.4736 | 0 | | 3117549 | 107117 | None | NO9 | Providing, laying, spreading and compacting graded stoneaggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mixplant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course onwell prepared surface and compacting with vibratory roller toachieve the desired density. (P.No 24, I.No.4.17of C S.R 2023-24,vol-3) ---- manhole work | Cum | 2635.77 | 2635.77 | 31.52 | False | None | None | False | None | False | 83079.4704 | 0 | | 3117550 | 107117 | None | NO10 | Providing 50 mm Dia HDPE Sleeve pipe with allied accessories at ferrule point of HSC to assist in regulating flow with allen key with appurtenances., complete.(P.No 109, I.No.9.22 C S.R2023-24,VOL5 ---- manhole work | Nos | 301.79 | 301.79 | 30.0 | False | None | None | False | None | False | 9053.7 | 0 | | 3117551 | 107117 | None | NO11 | Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead andlift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For:PVC pipes 110mm dia., 6 kg/sqcm andclass 3(P.No 113 I.No.10.1.7 S.R2023-24,VOL5) ---- manhole work | Mtr | 423.33 | 423.33 | 75.0 | False | None | None | False | None | False | 31749.75 | 0 |
|