createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1710511808033 version 6 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 3870.00 emd 232000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 25-04-2024 16:00:00 tenderQueryClose 24-04-2024 11:00:00 technicalBidOpen 26-04-2024 16:30:00 publishedDate 16-03-2024 12:28:20 publishedByPost PWD_EE_DIV_HAV publishedByUser KPE13544 - MAHABALESHAPPA K bidValidityPeriod 90 noOfCalls 2 preBidMeetingDate 24-04-2024 11:00:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn True percentageRateTypeText None contactPerson EXECUTIVE ENGINEER splitEmdRequiredYn True emdBankGuarantee 132000.00 emdCash 100000.00 bgValidityPeriod 135 hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08375234725 mobileNumber 9739136008 tenderSupplierList None
tenderSchedule	createdTs 1710511808036 version 18 createdDate None modifiedDate None tenderNumber PWD/2023-24/BD/WORK_INDENT5848/CALL-2 title BALANCE WORK OF CONSTRUCTION OF NEW PRAVASI MANDIRA AT RATTIHALLI, HAVERI DISTRICT AND SUPPLY OF FURNITURES description BALANCE WORK OF CONSTRUCTION OF NEW PRAVASI MANDIRA AT RATTIHALLI, HAVERI DISTRICT AND SUPPLY OF FURNITURES category WORKS categoryText Works ecv 15465863.35 deptName Public Works Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 1681 locationName PWD Division Office Haveri provisionalAmount 20000000.0 groupOverheadTotal 0.0 fileNumber AEE/PWD/HKR/IB-BldgRattihalli/2023-24
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1710511808000 1 None None Buildings Sub estimate No. 1 Construction of First Floor 7089893.09 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3098998 106585 None 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes finsishing concrete structure in line, all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Columns ---- including cost and conveyance of all materials, loading Cum 7118.77 7118.77 21.18 False None None False None False 150775.5486 0 3098999 106585 None 115 Formwork, Centering & Scaffloding 70% For Columns ---- including cost and conveyance of all materials, loading Cum 4983.14 4983.14 21.18 False None None False None False 105542.9052 0 3099000 106585 None 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes finsishing concrete structure in line, all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Beams,Lintel ---- including cost and conveyance of all materials, loading Cum 7118.77 7118.77 34.77 False None None False None False 247519.6329 0 3099001 106585 None 115 Formwork Centering Scaffloding 60% For Beams and Lintel ---- including cost and conveyance of all materials, loading Cum 4271.26 4271.26 34.77 False None None False None False 148511.7102 0 3099002 106585 None 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes finsishing concrete structure in line, all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Beams,Lintel,Slab ---- including cost and conveyance of all materials, loading Cum 7118.77 7118.77 52.97 False None None False None False 377081.2469 0 3099003 106585 None 115 Additionalities for Formwork, Centering & Scaffolding 50% For Roof Slab ---- including cost and conveyance of all materials, loading Cum 3559.39 3559.39 52.97 False None None False None False 188540.8883 0 3099004 106585 None 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes finsishing concrete structure in line, all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. ---- including cost and conveyance of all materials, loading Cum 7118.77 7118.77 3.22 False None None False None False 22922.4394 0 3099005 106585 None 115 Additionalities for Formwork, Centering & Scaffolding 60% For Sill ---- including cost and conveyance of all materials, loading Cum 4271.26 4271.26 3.22 False None None False None False 13753.4572 0 3099006 106585 None 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes finsishing concrete structure in line, all lead & lifts, cost of all materials, quality confirming to the requirments of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) )M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Chejja ---- including cost and conveyance of all materials, loading Cum 7118.77 7118.77 1.88 False None None False None False 13383.2876 0 3099007 106585 None 115 Additionalities for Formwork, Centering & Scaffolding 45% For Chejja ---- including cost and conveyance of all materials, loading Cum 3203.45 3203.45 1.88 False None None False None False 6022.486 0 3099008 106585 None 2.11.a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification ---- including cost and conveyance of all materials, loading Tonne 93062.12 93062.12 15.41 False None None False None False 1434087.2692 0 3099009 106585 None 6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. ---- including cost and conveyance of all materials, loading Cum 8290.15 8290.15 115.62 False None None False None False 958507.143 0 3099010 106585 None 6.15 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. ---- including cost and conveyance of all materials, loading Sqm 1074.63 1074.63 71.72 False None None False None False 77072.4636 0 3099011 106585 None 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves ( excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications ---- including cost and conveyance of all materials, loading Cum 102797.24 102797.24 2.55 False None None False None False 262132.962 0 3099012 106585 None 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ---- including cost and conveyance of all materials, loading Nos 1056.94 1056.94 15.0 False None None False None False 15854.1 0 3099013 106585 None 10.6.3 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete ---- including cost and conveyance of all materials, loading Each 62.42 62.42 90.0 False None None False None False 5617.8 0 3099014 106585 None 12.57.5 Providing and fixing 35 mm thick one side teak and one side commercial flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets ( core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 ( part-I) 1991. from manufacturer complete as per spcification ---- including cost and conveyance of all materials, loading Sqm 4054.05 4054.05 43.75 False None None False None False 177364.6875 0 3099015 106585 None 12.54 Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. ---- including cost and conveyance of all materials, loading m 330.82 330.82 10.2 False None None False None False 3374.364 0 3099016 106585 None 12.55.1 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges with both side prelam ---- including cost and conveyance of all materials, loading Sqm 2461.35 2461.35 3.78 False None None False None False 9303.903 0 3099017 106585 None 12.90 Providing fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016 sections and with minimum TiO2 Titanium Dioxide at 6PHR with TPEThermo Plastic Elastome and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. The cost is inclusive of all fixtures and separate charges for minor TP's shall not be made ---- including cost and conveyance of all materials, loading Sqm 7005.38 7005.38 37.2 False None None False None False 260600.136 0 3099018 106585 None 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- including cost and conveyance of all materials, loading Sqm 5949.48 5949.48 17.1 False None None False None False 101736.108 0 3099019 106585 None 11.34B Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc ---- including cost and conveyance of all materials, loading Kg 190.37 190.37 1140.3 False None None False None False 217078.911 0 3099020 106585 None 8.1.2 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- including cost and conveyance of all materials, loading Sqm 250.71 250.71 905.75 False None None False None False 227080.5825 0 3099021 106585 None 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- including cost and conveyance of all materials, loading Sqm 104.03 104.03 1456.72 False None None False None False 151542.5816 0 3099022 106585 None 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (Out side) ---- including cost and conveyance of all materials, loading Sqm 385.95 385.95 452.49 False None None False None False 174638.5155 0 3099023 106585 None 9.17.2 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete. ---- including cost and conveyance of all materials, loading Sqm 1222.35 1222.35 197.1 False None None False None False 240925.185 0 3099024 106585 None 9.24 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with whitecement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, Lakared, River Pink, Orissa Blue or equivalent. ---- including cost and conveyance of all materials, loading Sqm 2966.94 2966.94 132.03 False None None False None False 391725.0882 0 3099025 106585 None 10.1.1 Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. ---- including cost and conveyance of all materials, loading Sqm 4167.44 4167.44 2.63 False None None False None False 10960.3672 0 3099026 106585 None 15.2 Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acrylic PU dispersion with highly elastic and UV resistant water proofing treatment to the Existing Roof surface/Chajjas/Sunken portion of WC:Bathroom applied @ 1.2L/per m2,having tensile strength greater than 1.5N/mm2, elongation greater than 300% with solid content not less than 60% in 2 coats including surface preparation, priming the surface with water based acrylic primer @0.1 L/m2, and spreading 60 gsm geotextile between two top coats completely as per specification. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. ---- including cost and conveyance of all materials, loading Sqm 766.79 766.79 29.2 False None None False None False 22390.268 0 3099027 106585 None 7.18 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slopecompacting, including cost of materials, labour, curing complete as per specifications. ---- including cost and conveyance of all materials, loading Sqm 2098.29 2098.29 5.64 False None None False None False 11834.3556 0 3099028 106585 None 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete ---- including cost and conveyance of all materials, loading Sqm 924.83 924.83 18.79 False None None False None False 17377.5557 0 3099029 106585 None 10.14 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2, including pointing in white cement mixed with pigment of matching shade complete. ---- including cost and conveyance of all materials, loading Sqm 1150.57 1150.57 64.63 False None None False None False 74361.3391 0 3099030 106585 None 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessoris such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- including cost and conveyance of all materials, loading Kg 587.77 587.77 126.0 False None None False None False 74059.02 0 3099031 106585 None 8.33.1 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Special primer applied @ 0.75 ltr /10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- including cost and conveyance of all materials, loading Sqm 164.37 164.37 1456.72 False None None False None False 239441.0664 0 3099032 106585 None 8.30 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paer smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge ---- including cost and conveyance of all materials, loading Sqm 181.01 181.01 452.49 False None None False None False 81905.2149 0 3099033 106585 None 8.34.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge ---- including cost and conveyance of all materials, loading Sqm 52.02 52.02 54.3 False None None False None False 2824.686 0 3099034 106585 None 8.33.3 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- including cost and conveyance of all materials, loading Sqm 144.6 144.6 54.3 False None None False None False 7851.78 0 3099035 106585 None 15.10 Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product &work from certified manufacturers as per the direction of the Engineer In charge. ---- including cost and conveyance of all materials, loading Sqm 849.93 849.93 663.81 False None None False None False 564192.0333 0 1710511808000 1 None None Buildings Sub estimate No. 2 Water Supply and Sanitary work 986729.18 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3099036 106586 None 13.2.1 Providing and fixing brass stop cock of approved quality :15 mm nominal bore ---- including cost and conveyance of all materials, loading Nos 307.97 307.97 15.0 False None None False None False 4619.55 0 3099037 106586 None 13.20.2 Providing and fixing PTMT pillar cock of approved quality and colour. 15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms ---- including cost and conveyance of all materials, loading Each 323.42 323.42 5.0 False None None False None False 1617.1 0 3099038 106586 None 14.1.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests ---- including cost and conveyance of all materials, loading Each 5030.52 5030.52 2.0 False None None False None False 10061.04 0 3099039 106586 None 14.2.1 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlleddevice (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid ---- including cost and conveyance of all materials, loading Each 4983.14 4983.14 2.0 False None None False None False 9966.28 0 3099040 106586 None 14.7.8 White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow including operated levers ---- including cost and conveyance of all materials, loading Each 4236.39 4236.39 6.0 False None None False None False 25418.34 0 3099041 106586 None 14.80 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. ---- including cost and conveyance of all materials, loading Each 1465.69 1465.69 6.0 False None None False None False 8794.14 0 3099042 106586 None 13.9.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :150 mm diameter ---- including cost and conveyance of all materials, loading Nos 287.37 287.37 4.0 False None None False None False 1149.48 0 3099043 106586 None 14.40.2 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g ---- including cost and conveyance of all materials, loading Each 510.88 510.88 10.0 False None None False None False 5108.8 0 3099044 106586 None 14.32.2 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 453x357 mm ---- including cost and conveyance of all materials, loading Each 1048.54 1048.54 20.0 False None None False None False 20970.8 0 3099045 106586 None 13.31.2 Providing & fixing Chorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction Engineer in Charge.Exposed on wall - 20mm nominal dia pipes ---- including cost and conveyance of all materials, loading Rmtr 249.26 249.26 60.0 False None None False None False 14955.6 0 3099046 106586 None 13.31.3 Providing & fixing Chorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction Engineer in Charge.Exposed on wall - 25mm nominal dia pipes ---- including cost and conveyance of all materials, loading Rmtr 327.54 327.54 60.0 False None None False None False 19652.4 0 3099047 106586 None 13.31.4 Providing & fixing Chorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction Engineer in Charge.Exposed on wall - 32mm nominal dia pipes ---- including cost and conveyance of all materials, loading Rmtr 412.0 412.0 60.0 False None None False None False 24720.0 0 3099048 106586 None 13.31.6 Providing & fixing Chorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction Engineer in Charge.Exposed on wall - 50mm nominal dia pipes ---- including cost and conveyance of all materials, loading Rmtr 804.43 804.43 135.0 False None None False None False 108598.05 0 3099049 106586 None 13.4.4 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :50 mm nominal bore ---- including cost and conveyance of all materials, loading Nos 880.65 880.65 60.0 False None None False None False 52839.0 0 3099050 106586 None 13.8.2.2 Providing and fixing unplasticised PVC connection pipe with brass unions :45 cm length 20 mm nominal bore ---- including cost and conveyance of all materials, loading Nos 113.3 113.3 120.0 False None None False None False 13596.0 0 3099051 106586 None 13.34 Providing and placing on terrace, polyethylene water storage tanks as per IS 12701 : 1996 with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow pipes but without fittings and the base support for tank ---- including cost and conveyance of all materials, loading l 9.27 9.27 6000.0 False None None False None False 55620.0 0 3099052 106586 None 686 PVC pipes of10 Kg/cm2 for 110mm ---- including cost and conveyance of all materials, loading Rmtr 345.05 345.05 202.0 False None None False None False 69700.1 0 3099053 106586 None 672 PVC pipes of 4 Kg/cm2 for 200mm(4.256)) ---- including cost and conveyance of all materials, loading Rmtr 502.64 502.64 82.0 False None None False None False 41216.48 0 3099054 106586 None 16.60.1 Providing PVC-U INDIVIDUAL U.G.D House service connection (which shall be laid from inside the customer property ) which includes: a) Supply of PVC-U pipe (b) providing and fixing of 315 mm dia the PE Inspection chambres with lid consisting of inlet & outlet arrangements with base, riser of min. 0.42 m depth which includes earth work, fixing in CC-1:2:4 with appurtenances., complete. (c) civil works like Earthwork excavation for the pipeline trenches for laying of PVC-U pipes for the house connections in all types of soils , disintegrated rock,soft rock, hard rock, including cutting of any road using , crossing drains, compound, Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, c.c. wood work, steel work, including T & P and scaffolding wherever necessary sorting the dismantled material, disposal of unserviceable and stacking the serviceable material with all lifts and lead , restoring the damaged portions inside or outside the property premises, refilling the portions of trenches that are dug open including linking to existing sewer network with appurtenances. complete. 110MM DIA ---- including cost and conveyance of all materials, loading Each 8378.02 8378.02 25.0 False None None False None False 209450.5 0 3099055 106586 None 1.4.1 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m ---- including cost and conveyance of all materials, loading Cum 249.26 249.26 11.25 False None None False None False 2804.175 0 3099056 106586 None 1.90 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m ---- including cost and conveyance of all materials, loading Cum 273.98 273.98 25.0 False None None False None False 6849.5 0 3099057 106586 None 13.33.10 Providing & fixing Chorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction Engineer in Charge. External work - 150mm nominal dia pipes ---- including cost and conveyance of all materials, loading Rmtr 5465.18 5465.18 25.0 False None None False None False 136629.5 0 3099058 106586 None 16.13.1 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover ---- including cost and conveyance of all materials, loading Each 2304.11 2304.11 3.0 False None None False None False 6912.33 0 3099059 106586 None 16.15.1 Providing and constructing “WIRE CUT BRICK MACHINEHOLE CHAMBERS” using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15M alround the chamber. Construct Brick masonry in CM 1:4, 340 mm thick, with wirecut bricks of approved quality, plaster inside and out side with CM 1:3, 12mm thick, except for the conical surface outside where the plaster thickness shall be 20mm. Slope inside to be 1:6 in the concrete towards central drain and finished smooth. Fixing of pipes in CC 1:2:4 with graded metal of 20mm and down size. Supplying and fixing SFRC Machinehole frame and cover (Heavy Duty) conforming to IS:12592 with latest amendment, in CC 1:2:4. Supplying and fixing footsteps made of 12mm dia. steel bars (Fe-500) with 3mm thick plastic encapsulation (IS-10910). The footsteps shall be fixed 30cms apart and on CC block embeded to masonry wall. The whole works include watering, curing, barricading, danger lighting, pouring tar over MH frame and cover, cost of tar, shoring, strutting, dewatering, engraving Machinehole number with flow direction on the inner conical surface etc. as per the drawing etc. as per technical specifications and for the following diameters and depth etc. for 1.2mm diaCirc. B M.HConstructing Brick Masonry Circular Machinehole 1.2 m internal dia. , 1.0 M depth & SFRC cover & frame ---- including cost and conveyance of all materials, loading Each 29918.41 29918.41 2.0 False None None False None False 59836.82 0 3099060 106586 None 14.29 Providing and fixing 100 mm sand cast Iron grating for gully trap. ---- including cost and conveyance of all materials, loading Each 48.41 48.41 60.0 False None None False None False 2904.6 0 3099061 106586 None 13.22.12 Providing and fixing PTMT grating of approved quality and colour 125 mm nominal dia ---- including cost and conveyance of all materials, loading Nos 45.32 45.32 30.0 False None None False None False 1359.6 0 3099062 106586 None 664 PVC pipes of 10 Kg/cm2 for 200mm ---- including cost and conveyance of all materials, loading Rmtr 1189.65 1189.65 60.0 False None None False None False 71379.0 0 1710511808000 1 None None Buildings Sub estimate No. 3 For Sump tank 277727.71 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3099063 106587 None 1.14.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m ---- including cost and conveyance of all materials, loading Cum 105.06 105.06 35.0 False None None False None False 3677.1 0 3099064 106587 None 1.90 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- including cost and conveyance of all materials, loading Cum 273.98 273.98 15.0 False None None False None False 4109.7 0 3099065 106587 None 2.1.4 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately.Mix 1:3:6 (M10) Using 20 mm and down size graded crushed coarse aggregates ---- including cost and conveyance of all materials, loading Cum 6403.51 6403.51 1.0 False None None False None False 6403.51 0 3099066 106587 None 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes finsishing concrete structure in line, all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm and down size graded crushed coarse aggregates Raft ---- including cost and conveyance of all materials, loading Cum 7048.29 7048.29 2.0 False None None False None False 14096.58 0 3099067 106587 None 115 Formwork, Centering & Scaffloding 3% For raft ---- including cost and conveyance of all materials, loading Cum 211.45 211.45 2.0 False None None False None False 422.9 0 3099068 106587 None 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes finsishing concrete structure in line, all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm and down size graded crushed coarse aggregates for sump tank walls ---- including cost and conveyance of all materials, loading Cum 7048.29 7048.29 5.2 False None None False None False 36651.108 0 3099069 106587 None 115 Formwork, Centering & Scaffloding 10% For walls ---- including cost and conveyance of all materials, loading Cum 704.83 704.83 5.2 False None None False None False 3665.116 0 3099070 106587 None 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes finsishing concrete structure in line, all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm and down size graded crushed coarse aggregates cover slab ---- including cost and conveyance of all materials, loading Cum 7048.29 7048.29 2.0 False None None False None False 14096.58 0 3099071 106587 None 115 Formwork, Centering & Scaffloding 50% For slab ---- including cost and conveyance of all materials, loading Cum 3524.15 3524.15 2.0 False None None False None False 7048.3 0 3099072 106587 None 8.12 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineer-in-Charge. ---- including cost and conveyance of all materials, loading Kg 65.92 65.92 62.56 False None None False None False 4123.9552 0 3099073 106587 None 2.11.a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification ---- including cost and conveyance of all materials, loading Tonne 92140.71 92140.71 0.88 False None None False None False 81083.8248 0 3099074 106587 None 15.2 Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acrylic PU dispersion with highly elastic and UV resistant water proofing treatment to the Existing Roof surface/Chajjas/Sunken portion of WC:Bathroom applied @ 1.2L/per m2,having tensile strength greater than 1.5N/mm2, elongation greater than 300% with solid content not less than 60% in 2 coats including surface preparation, priming the surface with water based acrylic primer @0.1 L/m2, and spreading 60 gsm geotextile between two top coats completely as per specification. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. ---- including cost and conveyance of all materials, loading Sqm 759.11 759.11 36.0 False None None False None False 27327.96 0 3099075 106587 None 8.3.1 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- including cost and conveyance of all materials, loading Sqm 364.62 364.62 36.0 False None None False None False 13126.32 0 3099076 106587 None 8.33.1 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Special primer applied @ 0.75 ltr /10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- including cost and conveyance of all materials, loading Sqm 162.74 162.74 36.0 False None None False None False 5858.64 0 3099077 106587 None 3 (V010C) Providing & fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking arrangements with M.S flats 32x6 mm etc & painting with two or more coats with black Japan paint etc. complete as directed by the engineer-in-charge. ---- including cost and conveyance of all materials, loading Each 2020.86 2020.86 2.0 False None None False None False 4041.72 0 3099078 106587 None 13.33.9 Providing & fixing Chorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction Engineer in Charge.External on wall - 100mm nominal dia pipes ---- including cost and conveyance of all materials, loading Mtr 2599.72 2599.72 20.0 False None None False None False 51994.4 0 1710511808000 0 None None Buildings Sub estimate No. 4a For Borewell Drilling 162404.26 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3099079 106588 None 12.4 Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner or Schlumbergers’s method, including reconnaissance survey of geological formation. Geophysical investigation of existing ground water in the vicinity, its quality, quantity and acceptability of the users, indicating the location of the site, recommended depth of casing pipe required to seal the top unconsolidated formation including an extra depth of 1.0 metre in consolidated formation for proper seating of casing pipe, depth of drilling required to cover full depth of aquifer proposed to be tapped, probable yield and other information required including transportation of instruments and accessories to work site, engaging technical personal and labour required etc. NOTE: 1) Additional rate on item 1&2 is allowed for drilling in over burden and fixing Casing pipes beyond 20 M (for fixing Casing pipes only) a) Above 20 M and upto 30 M - 13%, b) Above 30 M - 30% (Measurement of overburden is restricted to the depth of casing pipe fixed excluding initial depth of 20M and projection above ground level). 2) A sum of Rs. 100/- is to be deducted for Dry Borewell towards yield test ---- including cost and conveyance of all materials, loading Each 5446.64 5446.64 1.0 False None None False None False 5446.64 0 3099080 106588 None 12.1.1 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) 0.00 TO 50MTR ---- including cost and conveyance of all materials, loading Mtr 381.1 381.1 50.0 False None None False None False 19055.0 0 3099081 106588 None 12.1.2 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) 50 TO 100 MTR ---- including cost and conveyance of all materials, loading Mtr 477.92 477.92 50.0 False None None False None False 23896.0 0 3099082 106588 None 12.1.3 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) 100 TO 150MTRS ---- including cost and conveyance of all materials, loading Mtr 493.0 493.0 50.0 False None None False None False 24650.0 0 3099083 106588 None 12.1.4 Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) 150 TO 200 MTRS ---- including cost and conveyance of all materials, loading Mtr 589.16 589.16 50.0 False None None False None False 29458.0 0 3099084 106588 None 12.32 Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, material and conforming to IS 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both ends.threaded conforming to IS 554-1985 one end fixed with socket conforming to IS 4270-2001 and the other end with screwed pipes all shall be responsibaly free from defects. The tubes shall be responsible straight end should be with ISI marking weighing 25.10kg/m.prices include Collar-Medium duty. ---- including cost and conveyance of all materials, loading Rmtr 1990.99 1990.99 30.0 False None None False None False 59729.7 0 3099085 106588 None O180A Providing and laying at site of work MS casing caps as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments including cost of material and labour charges for fixing, if any etc. complete with all lead and lifts and as directed by the Engineer in charge ---- including cost and conveyance of all materials, loading Each 168.92 168.92 1.0 False None None False None False 168.92 0 1710511808000 0 None None Buildings Sub estimate No. 4b For Borewell Pump, Pump house and Electrification 219811.78 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3099086 106589 None 13.13.6 Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per necessary ammendments and instructions of engineer incharge of work. For 3 HP ---- including cost and conveyance of all materials, loading Each 33101.11 33101.11 1.0 False None None False None False 33101.11 0 3099087 106589 None 11.3.6 Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) For Heavy Duty GI pipe: ---- including cost and conveyance of all materials, loading Mtr 699.37 699.37 140.0 False None None False None False 97911.8 0 3099088 106589 None P230C Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. ---- including cost and conveyance of all materials, loading Mtr 139.05 139.05 150.0 False None None False None False 20857.5 0 3099089 106589 None 13.32 Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work. ---- including cost and conveyance of all materials, loading Job 6695.0 6695.0 1.0 False None None False None False 6695.0 0 3099090 106589 None 5.42.1 Fabricating supplying and mounting MS box made out .SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clA with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. ---- including cost and conveyance of all materials, loading Sq CM 0.38 0.38 19500.0 False None None False None False 7410.0 0 3099091 106589 None 5.41.3 Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. Flat.with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. ---- including cost and conveyance of all materials, loading Mtr 555.0 555.0 2.0 False None None False None False 1110.0 0 3099092 106589 None 3.1.2 Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3654 ---- including cost and conveyance of all materials, loading Each 147.0 147.0 1.0 False None None False None False 147.0 0 3099093 106589 None 2.3 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.The following additional tests are compulsory either to be conducted at works or independent lab with witness by inspecting authority.Additional Tests for FRLS-Applicable Standard Oxygen Index -IS 694-1990, Clause 16.8 Temperature Index -IS 694-1990, Clause 16.13 Smoke Density -IS 694-1990, Clause 16.14 Test for Halogen Acid Gas evaluation -IS 694-1990, Clause 16.12 2.5mm ---- including cost and conveyance of all materials, loading Mtr 42.0 42.0 10.0 False None None False None False 420.0 0 3099094 106589 None 2.3.4 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.The following additional tests are compulsory either to be conducted at works or independent lab with witness by inspecting authority.Additional Tests for FRLS-Applicable Standard Oxygen Index -IS 694-1990, Clause 16.8 Temperature Index -IS 694-1990, Clause 16.13 Smoke Density -IS 694-1990, Clause 16.14 Test for Halogen Acid Gas evaluation -IS 694-1990, Clause 16.12 4mm ---- including cost and conveyance of all materials, loading Mtr 63.0 63.0 15.0 False None None False None False 945.0 0 3099095 106589 None 5.7.2 Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. ---- including cost and conveyance of all materials, loading Each 241.0 241.0 1.0 False None None False None False 241.0 0 3099096 106589 None 5.18.9 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. ---- including cost and conveyance of all materials, loading Each 3088.0 3088.0 1.0 False None None False None False 3088.0 0 3099097 106589 None 5.20 Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker (ELMCB) 240/450V up to 300mA sensitivity on existing wood/panel board. ---- including cost and conveyance of all materials, loading Each 2826.0 2826.0 1.0 False None None False None False 2826.0 0 3099098 106589 None 13.17.1 Fixing a shunt capacitor of . KVAR capacity with necessary clamps, bolts, and nuts on existing wooden or metal board including banking of more than one capacitor. ---- including cost and conveyance of all materials, loading Each 270.0 270.0 3.0 False None None False None False 810.0 0 3099099 106589 None 5.38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. ---- including cost and conveyance of all materials, loading Each 515.0 515.0 1.0 False None None False None False 515.0 0 3099100 106589 None 1.6.1 Digging of Pit for providing GI Pipe type Earthing ---- including cost and conveyance of all materials, loading Pit 759.0 759.0 1.0 False None None False None False 759.0 0 3099101 106589 None 51.01 GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg ---- including cost and conveyance of all materials, loading No 743.0 743.0 1.0 False None None False None False 743.0 0 3099102 106589 None 54.02 Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each ---- including cost and conveyance of all materials, loading No 676.0 676.0 1.0 False None None False None False 676.0 0 3099103 106589 None 51.03 Good Quality Salt for grounding purposes packed in 50 Kg gunny bag ---- including cost and conveyance of all materials, loading Bag 310.0 310.0 1.0 False None None False None False 310.0 0 3099104 106589 None 32.03 Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +3% and resistivity 14 Ohms/Kms (Max) as per IS-3975 ---- including cost and conveyance of all materials, loading Km 118004.0 118004.0 0.02 False None None False None False 2360.08 0 3099105 106589 None 31.05 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable ---- including cost and conveyance of all materials, loading Km 20886.0 20886.0 0.01 False None None False None False 208.86 0 3099106 106589 None 1.6.1 Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards and Lighting, Using sight Rails and Sign Boards at every 100 Mtr wherever necessary as directed. ---- including cost and conveyance of all materials, loading Cum 484.0 484.0 3.75 False None None False None False 1815.0 0 3099107 106589 None 1.1 Refilling the cable trenches with selected available earth from trench excavation including watering, consolidation in layers of 15 cm. Thickness including depositing of the surplus earth with a lead of 200 Mtr ---- including cost and conveyance of all materials, loading Cum 160.0 160.0 3.75 False None None False None False 600.0 0 3099108 106589 None 11.3.5 GI Pipe B - Class as per IS-1239 ---- including cost and conveyance of all materials, loading Mtr 498.0 498.0 4.0 False None None False None False 1992.0 0 3099109 106589 None 29.15 Laying the GI Pipe 80 mm to 150 mm dia at Drainage Water Supply Crossing including fixing collars elbows, bends, Tees and other fitting with Cuts and Threads wherever necessary complete. ---- including cost and conveyance of all materials, loading Mtr 93.0 93.0 4.0 False None None False None False 372.0 0 3099110 106589 None 035 Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable ---- including cost and conveyance of all materials, loading Set 324.0 324.0 1.0 False None None False None False 324.0 0 3099111 106589 None 5.35 Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 Amps three phase 4 wire whole current class-1 Accuracy Energy Meter. ---- including cost and conveyance of all materials, loading Each 5705.0 5705.0 1.0 False None None False None False 5705.0 0 3099112 106589 None 1.4 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m ---- including cost and conveyance of all materials, loading Cum 249.26 249.26 0.77 False None None False None False 191.9302 0 3099113 106589 None 2.1.5 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, plywood / steel formwork, cost of all materials of quality, labour, Usage charges of machineries, curing and all the other appurtenances required to complete the work as per technical specifications. ( The cost of steel reinforcement shall be paid separately).PCC 1:2:4 using 40 mm aggregate ---- including cost and conveyance of all materials, loading Cum 6340.68 6340.68 0.26 False None None False None False 1648.5768 0 3099114 106589 None 5.4 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) ---- including cost and conveyance of all materials, loading Cum 6580.67 6580.67 0.9 False None None False None False 5922.603 0 3099115 106589 None 10.6 RCC hume pipe Circular pump house: Supplying precast RCC Circular Hume pipe pump house with M.S door and RCC conical roof as per specification and drawings - Internal dia Mtr. 1200 mm & height of 2.5 Mtr. With Wall thickness 65mm ---- including cost and conveyance of all materials, loading Each 16893.03 16893.03 1.0 False None None False None False 16893.03 0 3099116 106589 None 10.7 Erection and positioning of RCC Hume pipe pump house/Cistern on size stone masory platform including transportation charges and handling,finishing with all necessary tools ,plants and materials etc.,complete as directed by the Engineer in charge of the work. ---- including cost and conveyance of all materials, loading Each 1938.46 1938.46 1.0 False None None False None False 1938.46 0 3099117 106589 None 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- including cost and conveyance of all materials, loading Sqm 118.45 118.45 10.37 False None None False None False 1228.3265 0 3099118 106589 None 8.49 Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade English and Roman ---- including cost and conveyance of all materials, loading cm 0.93 0.93 50.0 False None None False None False 46.5 0 1710511808000 0 None None Buildings Sub estimate No. 5 For Concrete Road 637215.5 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3099119 106590 None 1.12 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. ---- including cost and conveyance of all materials, loading Cum 97.85 97.85 160.0 False None None False None False 15656.0 0 3099120 106590 None 3.11 Preparation and surface treatment of formation by removing mud and slurry, watering to the extent needed to maintain the desired moisture content, trimming to the required line, grade, profile and rolling with 8-10 t smooth wheeled roller, complete as per clause 310 ---- including cost and conveyance of all materials, loading Sqm 4.12 4.12 400.0 False None None False None False 1648.0 0 3099121 106590 None 4.28 Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. ---- including cost and conveyance of all materials, loading Cum 2635.77 2635.77 60.0 False None None False None False 158146.2 0 3099122 106590 None 20.29 Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including construction joints, , primer, sealant , curing of concrete slabs for 14- days, and water finishing to lines and grade as per drawing and technical specification clause 1501 with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc., complete. as per the directions of the Engineer-in-charge of the work. ---- including cost and conveyance of all materials, loading Cum 6977.22 6977.22 60.0 False None None False None False 418633.2 0 3099123 106590 None 2.11.h Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification ---- including cost and conveyance of all materials, loading Tonne 81381.33 81381.33 0.53 False None None False None False 43132.1049 0 1710511808000 1 None None Buildings Sub estimate No. 6 For Rainwater Harvesting 176128.81 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3099124 106591 None 11.20.3 Supplying and erection of RCC rings of Well steining of 0.3Mtr depth using M20 grade concrete using clean graded granite or trap or jelly of approved quality 20mm and down size well compacted including centering ,formwork and plastering for both faces with C.M 1:3 proportion as per design using 6.50mm M.S Coil at the rate of10Kgs/ring including cost of steel and fabrication ,bailing out of water,errection etc.,complete For 1.20m dia (clear)rings of steining thickness 0.075mm upto 18M depth ---- including cost and conveyance of all materials, loading Each 1560.45 1560.45 60.0 False None None False None False 93627.0 0 3099125 106591 None 1.6.1 Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work Extra for excavating trenches for pipes, cables and similar works in all kinds of soil where excavation width is upto 600 mm for depth exceeding 1.5 m, but not exceeding 3 m. add 20 % extra (Rate is over corresponding basic item for depth upto 1.5 m) ---- including cost and conveyance of all materials, loading Cum 498.52 498.52 25.47 False None None False None False 12697.3044 0 3099126 106591 None 1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- including cost and conveyance of all materials, loading Cum 273.98 273.98 8.49 False None None False None False 2326.0902 0 3099127 106591 None 2.1.4 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately.Mix 1:3:6 (M10) Using 20 mm and down size graded crushed coarse aggregates ---- including cost and conveyance of all materials, loading Cum 6403.51 6403.51 1.02 False None None False None False 6531.5802 0 3099128 106591 None 6.4 Providing and Filling in foundation with granite / trap broken metal 100mm and down size with approved M-Sand including hand packing, ramming, watering including cost of all materials and labour with all lead and lift complete as per specifications ---- including cost and conveyance of all materials, loading Cum 2762.46 2762.46 3.4 False None None False None False 9392.364 0 3099129 106591 None 064 Supplying and filling Sand ---- including cost and conveyance of all materials, loading Cum 1520.28 1520.28 3.4 False None None False None False 5168.952 0 3099130 106591 None 2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes finsishing concrete structure in line, all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm and down size graded crushed coarse aggregates ---- including cost and conveyance of all materials, loading Cum 7048.29 7048.29 2.55 False None None False None False 17973.1395 0 3099131 106591 None 115 Additionalities Formwork, Centering & Scaffloding 50% For slab ---- including cost and conveyance of all materials, loading Cum 3524.15 3524.15 2.52 False None None False None False 8880.858 0 3099132 106591 None 2.11.h Providing Thermo-Mechanically Treated bars of grade Fe-550D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) ---- including cost and conveyance of all materials, loading Tonne 81381.33 81381.33 0.24 False None None False None False 19531.5192 0 1710511808000 0 None None Buildings Sub estimate No. 7 Furnitures work 4449773.6 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3099133 106592 None 001 Teak wood Square leg Dining table : Of size 6'x3.5' Made out of teak wood leg size 4"x4".Table upper patti 4"x1.25". Top 18mm ply with sunmica or 12mm glass. ---- including cost and conveyance of all materials, loading No 36200.0 36200.0 3.0 False None None False None False 108600.0 0 3099134 106592 None 002 Teak wood Dining chair seat & back cushion: (Rose wood model) with curved legs - front legs of size 3"x3" with curve .Rear legs of size 2.5"x1.5" with shape. Seat pattis of size 3"x1.25" with cushion.Back top pattis to be with turning of sixe 2"x2" chair shall be neatly finished and polished. ---- including cost and conveyance of all materials, loading No 9870.0 9870.0 18.0 False None None False None False 177660.0 0 3099135 106592 None 003 Serving Table: Made out of Teak Wood frame with 2"X2" legs and frame patti of size 3"X1.25" andbottom patti of size 2" X 1.25". Closed on all 3 sides with 12mm ply/PLPB and top made out of 8mm ply/PLPB. All visible surface to have 1mm thick laminate and inner surface 0.8mm laminate. ---- including cost and conveyance of all materials, loading No 14740.0 14740.0 2.0 False None None False None False 29480.0 0 3099136 106592 None 004 Wardrobe model : Made out of 18mm OSR PLPB (good quality ) /Ply with lamination.(One side raw prelaminated particle board ) on three sides and bavk of 12mm PLPB Inner design should have drawers in the center with lock. Top 3ft should be open with 1 hanger rod. Bottom should have 1 shelf. Exterior to be finished with laminate /veneer as per requirement ( Rate per Sqfeet) ---- including cost and conveyance of all materials, loading Sq.Ft 2100.0 2100.0 216.92 False None None False None False 455532.0 0 3099137 106592 None 005 Teak woodTable : of Size 6' x 3' , Leg side 2.5"x2.5" . Table frame to be 4"x1.25" thick pattis. Foot rest to be provide with 2"x1.5"=2 nos.Table top to b elaminated with 1mm thick laminate with teak edge banding lower side middle H shape patti. Table shall be neatly finished and polished. ---- including cost and conveyance of all materials, loading No 23540.0 23540.0 11.0 False None None False None False 258940.0 0 3099138 106592 None 006 Conference Table :(Plywood with Laminated Top) Of size Height 2.5’ x Width 2’. Made out of 18mm Plywood for Top and Front. With both side laminated and Front side closed. Inner side shall be provided suitable vertical support of 36mm Plywood. Table shall be provided with Footrest with suitable mm Plywood. Table Inner side shall be polish or paint. ( Rate per running ft.) ---- including cost and conveyance of all materials, loading Feet 4840.0 4840.0 16.4 False None None False None False 79376.0 0 3099139 106592 None 007 Director Cushion Chair: High back chair with seat and back High quality feather touch Rexine. Armswith cushioning. Chair to have SS base with 5 Caster wheel legs along with Syncro Mechanisum ---- including cost and conveyance of all materials, loading No 12600.0 12600.0 23.0 False None None False None False 289800.0 0 3099140 106592 None 008 Coral cushion chair : Medium back chair with adustable arms and tilting mechanism along with ss base with 5 caster wheel legs.Seat and back moulded foam. ---- including cost and conveyance of all materials, loading No 7260.0 7260.0 22.0 False None None False None False 159720.0 0 3099141 106592 None 009 Peacock Chair : (Standard company) Seat, and Back half cushion with Cloth or Rexin. ---- including cost and conveyance of all materials, loading No 4570.0 4570.0 10.0 False None None False None False 45700.0 0 3099142 106592 None 010 Teak Wood Alpha Cot : Of size 6.5'x5'. Made out of Teak wood Leg size - 3.5"x3.5", side rullers 4"x2". Head side center height 32" and Bits with curve of 4" height all along the head side, with middle one flower design. Leg side center height 18" and bits with curve of 4" height all along the leg side with one flower design. Head and Leg both side 1" thickness Teak wood planks. ---- including cost and conveyance of all materials, loading No 55545.0 55545.0 4.0 False None None False None False 222180.0 0 3099143 106592 None 011 Teak Wood Sunrise Cot Single : Of size 6.5'x3'. Made out of Teak wood leg size 2"x3" . Side bars 4"x1.5". Leg side height 18". Head side 33". Head and leg side Teak wood patti. Cot shall be neatly finished and polished. ---- including cost and conveyance of all materials, loading No 34280.0 34280.0 8.0 False None None False None False 274240.0 0 3099144 106592 None 012 Bed Side Table: (Small) Teak wood bed side table of size H-18" X D-15" X W-18". Made out of 2"X2" teak wood legs. The side table should have one drawer and one door, made out of 18mm ply onthe front side and all other three side covered with 12 mm ply with veneer. The top and bottom should be made out of 18mm ply, top with veneer. Inside painted along with all necessary hardware. ---- including cost and conveyance of all materials, loading No 7840.0 7840.0 8.0 False None None False None False 62720.0 0 3099145 106592 None 013 Corner table : of size height 2' width 3' . Made out of MDF/ply with veneer. Front with glass.MDF/ply with veneer. ---- including cost and conveyance of all materials, loading No 19960.0 19960.0 16.0 False None None False None False 319360.0 0 3099146 106592 None 014 Teak Wood Mosquito Frame : Of size 6'x6.5'. Made out of two vertical bars on the either side of size 4'x3"x1.5" upper side frame should be made with 2"x1.5" patties on all the 4 sides, such that it can be openable wherever required. ---- including cost and conveyance of all materials, loading No 9100.0 9100.0 8.0 False None None False None False 72800.0 0 3099147 106592 None 015 Teak wood Damru sofa set : 1+3+1 with tepaoy and cushion, made out of teak wood front and back legs ---- including cost and conveyance of all materials, loading No 96780.0 96780.0 10.0 False None None False None False 967800.0 0 3099148 106592 None 016 Teak wood teapoy : (Latest model) As per Indenters choice. ---- including cost and conveyance of all materials, loading No 8340.0 8340.0 26.0 False None None False None False 216840.0 0 3099149 106592 None 017 Dressing table with stool : Teak wood dressing table height 6' and middle 2.5' Table should be 2' height with 3 drawers on one side aqnd door with loack on right side made out of complete teak wood. Top tobe with 1" thickness. Mirror frame to be of 4' ht with 18" width. Mirror should be 3"x1.25" frame with stool ---- including cost and conveyance of all materials, loading No 29780.0 29780.0 8.0 False None None False None False 238240.0 0 3099150 106592 None 018 Providing & fixing 100% Polyester Curtains with specification of regular wash as per direction of Engineer in charge ---- including cost and conveyance of all materials, loading Sqm 1236.0 1236.0 240.0 False None None False None False 296640.0 0 3099151 106592 None 019 Providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. ---- including cost and conveyance of all materials, loading m 535.0 535.0 80.0 False None None False None False 42800.0 0 3099152 106592 None 020 Providing and supplying King Size 6ft x 6ft Soft PU foam 5 inch thick mattress with better enhanced air circulation & breathability & sleeping comfort of size as per direction of engineer in charge ---- including cost and conveyance of all materials, loading No 12360.0 12360.0 4.0 False None None False None False 49440.0 0 3099153 106592 None 021 Providing and supplying Single size 6ft x 2.5ft Soft PU foam 5 inch thick mattress of reputed make with better enhanced air circulation & breathability & sleeping comfort of size as per direction of engineer in charge ---- including cost and conveyance of all materials, loading No 7210.0 7210.0 8.0 False None None False None False 57680.0 0 3099154 106592 None 022 Providing and supplying Pillow Microfibre with deep sleeping comfort of size upto 70cm x 40cm as per direction of engineeer in charge ---- including cost and conveyance of all materials, loading No 123.6 123.6 16.0 False None None False None False 1977.6 0 3099155 106592 None 023 Providing & supplying 100% Polyester machine wash capable Blanket 80x90inches with calm and light colors as per direction of Engineer in charge of work ---- including cost and conveyance of all materials, loading No 1854.0 1854.0 4.0 False None None False None False 7416.0 0 3099156 106592 None 024 Providing & supplying 100% Polyester machine wash capable Blanket 66x90inches with calm and light colors as per direction of Engineer in charge of work ---- including cost and conveyance of all materials, loading No 1854.0 1854.0 8.0 False None None False None False 14832.0 0 1710511808000 0 None None Buildings Sub estimate No. 8 For Internal Electrification work 1012371.42 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3099157 106593 None 6.7.2 Supplying .TR split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 V with hermetically sealed compressor with air cooled condenser, motor capacitor and start run capacitors, relay and over load protector internal unit, with one indoor and one outdoor unit The condenser unit will be placed outside the room on the terrace to avoid noise including standard length of suitable size copper tubing covered with insulation tube. (High wall chorded/cordless) suitable capacity 3 core sheathed/ PVC copper cable and a battery operated wireless remote unit 1.5 Ton capacity ---- including cost and conveyance of all materials, loading Each 47683.0 47683.0 8.0 False None None False None False 381464.0 0 3099158 106593 None 6.12 Installation charges for split type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable Angle Iron support upto 3.0 Ton split/cassette type A/C. ---- including cost and conveyance of all materials, loading Each 3175.0 3175.0 8.0 False None None False None False 25400.0 0 3099159 106593 None 6.13.1 Supplying and installation of insulated refrigerant copper tubing of 5/8" and 3/8" with polythene foam insulation 3 core 80 stand copper wiring between indoor and outdoor unit Leak testing oil and gas charging for additional piping length of tube.Split ---- including cost and conveyance of all materials, loading m 1549.0 1549.0 80.0 False None None False None False 123920.0 0 3099160 106593 None 6.22 Extra for Fabrication supply and fixing of Stand fabricated using slotted angle /L angle of size 6mm x 50mm for mounting out door/indoor A.C. unit/ Batteries ---- including cost and conveyance of all materials, loading Each 4807.0 4807.0 8.0 False None None False None False 38456.0 0 3099161 106593 None 3.6.11 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV/Telephone Socket ---- including cost and conveyance of all materials, loading Each 156.0 156.0 8.0 False None None False None False 1248.0 0 3099162 106593 None 11.6.1 Supplying of recess mounting non integral type . LED w luminaire comprising of pressure decast extruded aluminium housing, with spring loaded false ceiling Power LEDs with CCT 6500 degree K, CRI 70%. efficacy 100 lumen per W, 120degree beam spread, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF 0.95, power loss should 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. LED modular down light 1'x1' 18W ---- including cost and conveyance of all materials, loading Each 3138.0 3138.0 25.0 False None None False None False 78450.0 0 3099163 106593 None 12.1 Supplying and fixing one of 230 V bell or buzzer and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws. ---- including cost and conveyance of all materials, loading Each 189.0 189.0 8.0 False None None False None False 1512.0 0 3099164 106593 None 13.7.1 Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clA.On wall/ ceiling / Rafter / Girders ---- including cost and conveyance of all materials, loading Each 122.0 122.0 25.0 False None None False None False 3050.0 0 3099165 106593 None 3.14.12 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 16A Three Way 5 Pin Socket ---- including cost and conveyance of all materials, loading Each 115.0 115.0 12.0 False None None False None False 1380.0 0 3099166 106593 None 3.14.13 Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 16A Three Pin Top ---- including cost and conveyance of all materials, loading Each 110.0 110.0 12.0 False None None False None False 1320.0 0 3099167 106593 None 32.12 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 50 Sqmm, 4 Core, (17 GI Strips - 4 x 0.8 mm) ---- including cost and conveyance of all materials, loading Km 207194.0 207194.0 0.15 False None None False None False 31079.1 0 3099168 106593 None 1.4.1 Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m ---- including cost and conveyance of all materials, loading Cum 242.0 242.0 60.0 False None None False None False 14520.0 0 3099169 106593 None 21.06 Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff . 35 to 95 Sqmm ---- including cost and conveyance of all materials, loading Km 31139.0 31139.0 0.15 False None None False None False 4670.85 0 3099170 106593 None 35.01 Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable up to 50 Sqmm ---- including cost and conveyance of all materials, loading Set 324.0 324.0 2.0 False None None False None False 648.0 0 3099171 106593 None 59.03 Heavy Duty Copper Terminal Long Barrel 50 Sqmm Copper Terminal, Apprx Wt: 26 Gm ---- including cost and conveyance of all materials, loading No 58.0 58.0 8.0 False None None False None False 464.0 0 3099172 106593 None 66.04 HDPE/PLB Pipe 50/42 mm BESCOM Part 3 11kv materials ---- including cost and conveyance of all materials, loading Km 85014.0 85014.0 0.08 False None None False None False 6801.12 0 3099173 106593 None 009 Providing and fixing perforated 50 mm dia. GI pipes 'A' class in drilled holes for drainage including cost of all materials, machinery, labour, making perforations, providing flap valve and jointing etc.,complete with all leads and lifts. (For Dam and Allied works) ---- including cost and conveyance of all materials, loading Mtr 543.0 543.0 10.0 False None None False None False 5430.0 0 3099174 106593 None 7.2.8 Supplying .litres capacity vertical/horizontal type wall mounting Electrical water heater with 22 SWG copper/SS sheet metal inner Container tinned inside Fiber body outside, filled with glass wool between inner and outer container for thermal insulation complete. The inlet and outlet pipes so arranged that water flow inside results in water to flow out from the inner container without turbulence. The Inner container shall have direct immersion type copper tube nickel plate. 2kW capacity element with a neon indicator fitted with 20A capacity 25 to 85 degree Centigrade range thermostat. The water heater shall completely be wired with 40/0.0076 inch 3 core copper flexible wire of 1.5 meters length and the outer container provided with heavy gauge brackets for wall mounting.5 Star With Fibre body35 L ---- including cost and conveyance of all materials, loading Each 15540.0 15540.0 4.0 False None None False None False 62160.0 0 3099175 106593 None 13.15.2 Erection charges for fixing a . litres capacity wall mounting electric geysers using bolts, flat at one end nut and washers at the other end for through bolts and nuts and washers with 150x450x600mm back plate and wiring complete with 15A 3 pin top.35 to 50 Litres ---- including cost and conveyance of all materials, loading Each 698.0 698.0 4.0 False None None False None False 2792.0 0 3099176 106593 None 9.4.4 Supplying, installation, testing & commissioning of 12V .AH batteries in poly propylene container for D.G. sets. Low maintenance batteries, plate type. 100 AH capacity ---- including cost and conveyance of all materials, loading Each 20133.0 20133.0 6.0 False None None False None False 120798.0 0 3099177 106593 None 7.4.3 Supplying, installation, testing and commissioning of solar hot water heater comprising of high quality Evacuated Glass Tube (EGT) with absorber coating collector of size 58 x 1800 mm. Inner tank Material Stainless steel 304-L Grade with Aluminium Stucco cladding made of High quality PUF insulation to minimizes heat loss and hold water Temperature upto 72 Hrs.with appropriate capacity electrical back up arrangement excluding inlet and out let pipes. Fitted with Sacrificial Anode 300 L - 29 nos Tubes ---- including cost and conveyance of all materials, loading Each 51528.0 51528.0 2.0 False None None False None False 103056.0 0 3099178 106593 None 8.02 GI Wire 8 SWG BESCOM Part 3 11kv materials ---- including cost and conveyance of all materials, loading MT 750470.0 750470.0 0.005 False None None False None False 3752.35 0 1710511808000 0 None None Buildings Sub estimate No. 9 Diesel Generator 453808.0 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3099179 106594 None 10.1.2 Supplying, installing, testing and commissioning of Diesel Generator set with following specifications. Power rating as per standard reference condition as per-BS 5514/ISO 3046/ ISO 8528 & IS 1002/ISO 3046 Generator set specifications. Engine: Diesel generating set are rated at 1500RPM and conform to ISO 8528 specifications. The engines are radiator cooled, four stroke and multi cylinder, conforming to ISO 3046. The scope of supply includes: Electrical starter motor12V DC Battery charging alternator, Bosch fuel system with mechanical governor, A1 Class. Spin-on lube oil filter, Spin-on dual fuel filter with water separator, Turbocharger, Charge air cooler, Silencer (Hospital grade), Dry type air cleaner, Shutoff coil, Flywheel and flywheel housing, First fill of lube oil and coolant, Safety for low lube oil pressure, Safety for high water temperature, Permissible overload of 10% for one hour in 12 hours of operation Capacity of Fuel Tank: Fuel tank suitable for 8 hours of operation Alternator is suitable for operation at 1500 RPM, 415 V, 0.8 pf (lag) suitable for 50 Hz, 3 phase, 4 wire systems, conforming to IS/IEC 60034-1. The Alternator is brush less type, screen protected, revolving field, self excited, self regulated through an AVR. The alternator shall have 1.0% Voltage regulation (max) in static conditions- IP: 23 protections with insulation class F&H. Mounting arrangement: Engine and alternator are mounted on a common MS fabricated base frame with AVM pads. Control Panel: The control panel is manufactured with 14/16 gauge CRCA sheet and is powder coated for weather-proof and long lasting finish. The control panel consists of the followingparts:- PS0500 Controller, Aluminium bus bars with suitable capacity within/outgoing terminals, Indicating for 'Load On' and 'Set Running', Instrument fuses duly wired and ferruled, MCCB of suit Genset Controller: microprocessor based generator set monitoring and control system The control provides a simple operator interface to the generator set, manual and remote start/ stop control, shutdown fault indication, and an LCD hour counter. The integration of all functions into a single control system provides enhanced reliability and performance compared to conventional generator set controlsystems. This control has been designed and tested to meet harsh environment in which gensets are typically applied. Features, Functions, protections 16 character x 2 line alphanumeric LCD display with LED Backlight Operator interface, Provide a record of most recent fault conditions. 20 kVA/16kW ---- including cost and conveyance of all materials, loading Set 395097.0 395097.0 1.0 False None None False None False 395097.0 0 3099180 106594 None 10.2.1 Supply, Erection, testing and commissioning of AMF panel suitable for .kVA DG set. The panel is of cubical type base/floor mounting control panel with hinged doors, undrilled bottom gland plate, aluminium Bus Bar with the accommodation for .A 4 pole contactor for alternator with thermal O/L relay,. A 4 pole contactor for mains, HRC fuse for short circuit protection, Microprocessor based AMF module with supply failure timer, Restoration timer, 3 impulse automatic engine start/stop logic, Mains/generator voltage, .capacity bypass switch and frequency sensing, PCC 1301controller with water temperature/Lube oil pressure/ engine speed, Voltage/ampere/Frequency/ kVA, Running-hour count, No of starts, Fault indication, over / under speed, Fails to start, Low oil pleasure, High engine temperature, Under/over voltage, over current, Earth fault relay, with indications for Mains on, Load on Mains, Battery charger on Push buttons AMF module by pass Mode, Battery charger unit with inbuilt Auto/Manual and Flat/Boost facility. The complete set shall have sufficient safety and adhere to NEC, NBC 2016, IEC, CPWD specifications, PCB norms and KSGEI Acts and Rules.15 KVA to 30 KVA ---- including cost and conveyance of all materials, loading Each 58711.0 58711.0 1.0 False None None False None False 58711.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1710511808000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1710511808000 0 None None ELIGIBILITY Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1710511808000 0 None None ELIGIBILITY The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Karnataka Public Procurement Portal due to internet connectivity issues and technical glitches at bidders end. None 1710511808000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1710511808000 0 None None ELIGIBILITY Bidder shall pay Contract Management Module processing fees is as per KPPP generate None 1710511808000 0 None None ELIGIBILITY Conditional tenders will not be accepted. None 1710511808000 0 None None ELIGIBILITY As per karnataka state government order LD/300/LET/2006 Bangalore dated 01-01-2007 and Govt letter No.PW/134/BMS /2007/dated 27-07-2007, a sum amounting to 1 percent of the bill amount will be deducted towards constructions labour welfare fund. None 1710511808000 0 None None ELIGIBILITY Royalty on construction materials and other taxes will be deducted as per prevailing Govt orders None 1710511808000 0 None None ELIGIBILITY All the documents to be uploaded shall be neatly scanned and the documents scanned shall be in original. None 1710511808000 0 None None ELIGIBILITY Any discrepancies observed in the documents uploaded by the tenderer the tender shall liable to rejected. None 1710511808000 0 None None ELIGIBILITY All the Formats prescribed in the bid documents shall be filled in complete manner. ( section 3 & 4 of the bid document ) and shall be uploaded properly, signed by Tenderer . Necessary Certificates shall be uploaded along with the formats wherever required. General documents Section can be used for this purpose. None 1710511808000 0 None None ELIGIBILITY Tenderers are requested to read the Bid Documents before submission of their bid. None 1710511808000 0 None None ELIGIBILITY The Tenderer should submit proposed methodology and program of construction, backed with equipment and materials duly supported with broad calculations and quality management, plan, proposed to be adopted, justifying of execution and completion of the work as per technical specifications within the stipulated period of completion. None 1710511808000 0 None None ELIGIBILITY Department will not supply any materials. None 1710511808000 0 None None ELIGIBILITY The cost of the Tender form shall not be refundable. None 1710511808000 0 None None ELIGIBILITY The employer is not responsible for any delay in accessing E-Karnataka Public Procurement Portal. None 1710511808000 0 None None ELIGIBILITY The Employer reserves the right to reject one or all tender without assigning any reasons. None 1710511808000 0 None None ELIGIBILITY The Tenderers should be present during opening of the tender and also submit the uploaded documents duly attested by the Gazetted Officer not below the Rank of Executive Engineer. None 1710511808000 0 None None ELIGIBILITY The contractor should employ only registered labours as per Govt. Circular No. PWD/198/BMS/2009/ Dated: 24-06-2009. As per EPF & MP act 1952 in respect of the employees angaged by or through contractors, agencies and contractors shall have provident fund code no. & all the contract employees deployed by them are enrolled as members of provident fund. None 1710511808000 0 None None ELIGIBILITY Contractors should Registered in KPWD and copy should be uploaded in E-Karnataka Public Procurement Portal Attested by the Gazzeted officers not below the rank of Executive Engineer. None 1710511808000 0 None None ELIGIBILITY GST shall be paid to the tendered amount separately. None 1710511808000 0 None None ELIGIBILITY The Increase in G.S.T shall not be paid in the extended period of Contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time. None 1710511808000 0 None None ELIGIBILITY Further particulars, if any, required by the Contractor can be had from the office of the Executive Engineer, PWD Division Haveri during office hours on all working days. It may be noted that if any of the dates mentioned above happened next working day will holds good in lieu of the dates mentioned. None 1710511808000 0 None None ELIGIBILITY Work Completion/ Execution Period : 11 Months None 1710511808000 0 None None ELIGIBILITY Each Tenderer shall furnish Liquid Assets and / or availability of credit facilities of not less than Rs. 42.18 lakhs (Credit Lines / Letter of Credit / Certificates from banks for meeting the fund requirement etc. (Letter of credit should be in prescribed format-2, if not then the tender will not be accepted) None 1710511808000 0 None None ELIGIBILITY Any Deviation/Error/mistake found in units of items, they should be read as in the Unified SR 2023-24 subsequent Corrigendums and the rates shall be quoted accordingly. None 1710511808000 0 None None ELIGIBILITY Star Rates will be applicable as per Government Circular No. PWD 159/CRM/2009/ Bangalore/Dated: 30-09-2010 or any other relevant Government Orders None 1710511808000 0 None None ELIGIBILITY DEFECT LIABILITY PERIOD: 365 days None 1710511808000 0 None None ELIGIBILITY including cost and conveyance of all materials, loading & unloding with all leads, lifts, etc., complete, labour & equipments and all other incidental charges & as directed by the Engineer-in-charge of the work None 1710511808000 0 None None ELIGIBILITY The EMD of Rs.2,32,000/shall be made through e-payment or in Two parts-Part (1) Rs.100000 /- by e-payment Part (2) Rs.132000/- Shall be in the form of Bank Guarantee/FDR, in the prescribed format, obtained from any Nationalized / Scheduled bank in favor of Executive Engineer, PWD, Division, Haveri which should be scanned & uploaded to the e Karnataka Public Procurement Portal while submitting the tender. Original Bank Guarantee /FDR of the part (2) of EMD, shall be delivered to the Executive Engineer, PWD , Division, Haveri, at the time of agreement. None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Executed in any one year the following minimum quantities of work PCC/RCC 150.00 Cum BBM/SSM/CC Solid Blocks /Similar Masonry Walls 99.00 Cum Steel Fabrication 13.65 Tonne Plastering 1115.40 Sqm Laying of Tiles 330.00 Sqm Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None To qualify for award of this contract, each Tenderer in his name should have in the last five years 2018-19, 2019-20, 2020-21, 2021-22 & 2022-23. 3.2(b) satisfactorily completed (at least 90% of the contract value), as prime contractor, at least one similar work such as Building work of value not less than Rs 77.33 Lakhs (usually not less than 50% estimated value of contract) Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Availability by owning/ Lease/ Hire basis the following key and critical equipment for this work: For Lease/ Hire basis- relevant documents (commitment agreements etc., shall be scanned and uploaded) As per this note, each tenderer should demonstrate availability of few key equipments / machinery for execution of the work. However as per Govt. circular No.GO-FD/AE/263/EXP12-2022/D: 11-05-2022, this clause for owning key equipments for works costing upto Rs. 3.00 crores is exempted. However it is obligatory for the contractor to use the following machinery for various activities involved in construction as per MORTH Specification 1) Concrete Batch Mix Plant/Rotavator of suitable Specification 1 No. 2) Shuttering materials 250.00 Sqm 3) Plate & Pin Vibrators 2 Nos Each 4) Excavator like JCB/Hitachi 1 No 5) Water tanker 1 No 6) Tippers 2 Nos 7) Construction elevator/Building Hoist/Tower Cranes 1 No 8) Pumping Machinery 1 No Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Should scan and attach the requisite ownership documents/ hire/lease agreement with the Bid and prod None None None None The EMD of Rs.2,32,000/shall be made through e-payment or in Two parts-Part (1) Rs.100000 /- by e-payment Part (2) Rs.132000/- Shall be in the form of Bank Guarantee/FDR, in the prescribed format, obtained from any Nationalized / Scheduled bank in favor of Executive Engineer, PWD, Division, Haveri which should be scanned & uploaded to the e Karnataka Public Procurement Portal while submitting the tender. Original Bank Guarantee /FDR of the part (2) of EMD, shall be delivered to the Executive Engineer, PWD , Division, Haveri, at the time of agreement. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Bank Guarantee None None None None 3.3 (b)Each Tenderer should further demonstrate: liquid assets and/or availability of credit facilities of not less than Rs.42.18 lakhs Credit lines/letter of credit/ certificates from the banks for meeting the fund requirement etc. (Letter of credit should be in prescribed format-2, if not then the tender will not be accepted) Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit None None None None To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e. 2018-19, 2019-20, 2020-21, 2021-22 & 2022-23. 3.2 (a) Achieved in at least two financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs.309.32 Lakhs (Turnover Certificate should be with UDIN Number) Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Constitutional and Legal Status of the Tenderer Others PWD Registration createdTs version createdDate modifiedDate documentName None None None None PWD Registration Certificate (Class I/II/III/IV) None None None None Principal Place of Business (Full address) Others Address createdTs version createdDate modifiedDate documentName None None None None Others -- Address None None None None Qualification and experience of the key technical and Management personnel in permanent employment with the Tenderer and those that are proposed to be deployed on this work, if work is awarded Others Bio data of the personnel createdTs version createdDate modifiedDate documentName None None None None Others -- Bio data of the personnel None None None None Name and Address Telephone Nos. Fax Nos. and email ID of the Tenderers Bankers Others Information on the Letter Head of the tenderer createdTs version createdDate modifiedDate documentName None None None None Others -- Information on the Letter Head of the tenderer None None None None The proposed methodology and program of construction, backed with equipment planning and deployment duly supported with broad calculations and quality control procedures proposed to be adopted, justifying their capability of execution and completion of the work as per technical specifications within the stipulated period of completion Others CPM/PERT Chart createdTs version createdDate modifiedDate documentName None None None None Others -- CPM/PERT Chart None None None None List of existing commitments and ongoing works Others Information in Formats enclosed with this NIT createdTs version createdDate modifiedDate documentName None None None None Others -- Information in Formats enclosed with this NIT None None None None List of works for which tenders already submitted Others Information in Formats enclosed with this NIT createdTs version createdDate modifiedDate documentName None None None None Others -- Information in Formats enclosed with this NIT None None None None Banker Details for reference Others Banker Details for reference createdTs version createdDate modifiedDate documentName None None None None Others -- Banker Details for reference None None None None Information on works which are yet to be completed, Information of the works for which Tender Acceptance letters are recieved, Information of the works for which Tenderer has submitted Tender, Information on litigation in which the Tenderer is involved Others Information in Formats enclosed with this NIT createdTs version createdDate modifiedDate documentName None None None None Others -- Information in Formats enclosed with this NIT
tenderCriterionDocumentList	documentName optional documentTypeText PWD Registration Certificate True Technical Bid Similar nature of Work done Certificate issued by competent authority not below the rank of Executive Engineer True Technical Bid Bankers Certificate Line of credit certificate, Certificate should be as per format 9 attached otherwise tender will not be accepted Conditional LOC is not accepted True Technical Bid Machinery and Equipments True Technical Bid Annual Turnover Certificate & Balance Sheet Turnover Certificate should be with UDIN Number True Technical Bid
tenderWorkLocationList
tenderAddress	createdTs 1710512750000 version 0 createdDate None modifiedDate None blockNumber Executive Engineer PWD Division Haveri street None city HAVERI state Karnataka pin 581110
tenderRecallDTO	None