| 3097055 | 106497 | None | code01 | GROUND FLOOR Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m | Cum | 75.19 | 75.19 | 362.62 | False | None | None | False | None | False | 27265.3978 | 0 |
| 3097056 | 106497 | None | code02 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting upto 1.5 m depth | Cum | 280.16 | 280.16 | 90.66 | False | None | None | False | None | False | 25399.3056 | 0 |
| 3097057 | 106497 | None | code03 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | Cum | 210.12 | 210.12 | 90.66 | False | None | None | False | None | False | 19049.4792 | 0 |
| 3097058 | 106497 | None | code04 | Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour, rolling,water,all materials,usage& all other appurtenaces required to complete the work. | Cum | 414.06 | 414.06 | 581.12 | False | None | None | False | None | False | 240618.5472 | 0 |
| 3097059 | 106497 | None | code05 | Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. | Sqm | 97.85 | 97.85 | 491.82 | False | None | None | False | None | False | 48124.587 | 0 |
| 3097060 | 106497 | None | code06 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates PCC | Cum | 5362.18 | 5362.18 | 26.14 | False | None | None | False | None | False | 140167.3852 | 0 |
| 3097061 | 106497 | None | code07 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. Rate is inclusive of frame work, centring and scaffolding. (the cost of steel reinforment shall be paid separately). M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Rcc For Footing | Cum | 6651.04 | 6651.04 | 93.39 | False | None | None | False | None | False | 621140.6256 | 0 |
| 3097062 | 106497 | None | code08 | Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. Rate is inclusive of frame work, centring and scaffolding. (the cost of steel reinforment shall be paid separately). M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates RCC Plinth beams | Cum | 9858.34 | 9858.34 | 23.15 | False | None | None | False | None | False | 228220.571 | 0 |
| 3097063 | 106497 | None | code09 | Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.Rate is inclusive of frame work, centring and scaffolding. (the cost of steel reinforment shall be paid separately). M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Column Upto Footing Plinth level | Cum | 10491.99 | 10491.99 | 6.13 | False | None | None | False | None | False | 64315.8987 | 0 |
| 3097064 | 106497 | None | code10 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.Rate is inclusive of frame work, centring and scaffolding. (the cost of steel reinforment shall be paid separately).M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Above Plinth Beam level upto slab bottom | Cum | 10831.69 | 10831.69 | 21.34 | False | None | None | False | None | False | 231148.2646 | 0 |
| 3097065 | 106497 | None | code11 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.Rate is inclusive of frame work, centring and scaffolding. (the cost of steel reinforment shall be paid separately). M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Lintel Beam For Main Wall | Cum | 10187.94 | 10187.94 | 6.52 | False | None | None | False | None | False | 66425.3688 | 0 |
| 3097066 | 106497 | None | code12 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.Rate is inclusive of frame work, centring and scaffolding. (the cost of steel reinforment shall be paid separately). M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates RCC For Chajja At Lintel level | Cum | 9232.82 | 9232.82 | 1.68 | False | None | None | False | None | False | 15511.1376 | 0 |
| 3097067 | 106497 | None | code13 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. Rate is inclusive of frame work, centring and scaffolding. (the cost of steel reinforment shall be paid separately). M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates RCC For Roof Beams | Cum | 10194.53 | 10194.53 | 49.61 | False | None | None | False | None | False | 505750.6333 | 0 |
| 3097068 | 106497 | None | code14 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. Rate is inclusive of frame work, centring and scaffolding. (the cost of steel reinforment shall be paid separately). M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates RCC For Slab | Cum | 9557.37 | 9557.37 | 73.46 | False | None | None | False | None | False | 702084.4002 | 0 |
| 3097069 | 106497 | None | code15 | Providing Thermo-Mechanically Treated bars of grade Fe-550 or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) | Kg | 94.76 | 94.76 | 36219.79 | False | None | None | False | None | False | 3432187.3004 | 0 |
| 3097070 | 106497 | None | code16 | Providing Size Stone masonry with hard stone in foundation & plinth
with Cement mortar 1:6 (1 cement : 6 coarse sand) | Cum | 5512.56 | 5512.56 | 10.4 | False | None | None | False | None | False | 57330.624 | 0 |
| 3097071 | 106497 | None | code17 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. | Sqm | 1231.88 | 1231.88 | 313.14 | False | None | None | False | None | False | 385750.9032 | 0 |
| 3097072 | 106497 | None | code18 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. | Sqm | 968.2 | 968.2 | 27.48 | False | None | None | False | None | False | 26606.136 | 0 |
| 3097073 | 106497 | None | code19 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Rate is inclusive of frame work, centring and scaffolding. (the cost of steel reinforment shall be paid separately). Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates Sill Level Bed | Cum | 5899.84 | 5899.84 | 7.45 | False | None | None | False | None | False | 43953.808 | 0 |
| 3097074 | 106497 | None | code20 | Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 219.39 | 219.39 | 913.19 | False | None | None | False | None | False | 200344.7541 | 0 |
| 3097075 | 106497 | None | code21 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 255.44 | 255.44 | 479.72 | False | None | None | False | None | False | 122539.6768 | 0 |
| 3097076 | 106497 | None | code22 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in
charge. | Sqm | 85.49 | 85.49 | 913.19 | False | None | None | False | None | False | 78068.6131 | 0 |
| 3097077 | 106497 | None | code23 | Providing and fixing plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm zinc coating of 120gms per sqm width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment ) | Mtr | 26.78 | 26.78 | 750.0 | False | None | None | False | None | False | 20085.0 | 0 |
| 3097078 | 106497 | None | code24 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Rate is inclusive of frame work, centring and scaffolding. (the cost of steel reinforment shall be paid separately). Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates Flooring Bed | Cum | 5899.84 | 5899.84 | 46.74 | False | None | None | False | None | False | 275758.5216 | 0 |
| 3097079 | 106497 | None | code25 | Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. | Sqm | 2466.85 | 2466.85 | 496.02 | False | None | None | False | None | False | 1223606.937 | 0 |
| 3097080 | 106497 | None | code26 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. | Sqm | 784.86 | 784.86 | 23.19 | False | None | None | False | None | False | 18200.9034 | 0 |
| 3097081 | 106497 | None | code27 | Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. | Sqm | 1068.11 | 1068.11 | 78.48 | False | None | None | False | None | False | 83825.2728 | 0 |
| 3097082 | 106497 | None | code28 | Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. | Cum | 63451.09 | 63451.09 | 0.41 | False | None | None | False | None | False | 26014.9469 | 0 |
| 3097083 | 106497 | None | code29 | Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. do- 35 mm thick both side commercial | Sqm | 3032.32 | 3032.32 | 17.28 | False | None | None | False | None | False | 52398.4896 | 0 |
| 3097084 | 106497 | None | code30 | Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. | Nos | 1525.43 | 1525.43 | 7.0 | False | None | None | False | None | False | 10678.01 | 0 |
| 3097085 | 106497 | None | code31 | Applying priming coats with primer of approved brand and
manufacture, having low VOC (Volatile Organic Compound)
content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre as per specifications and as per directions of Engineer in charge. | Sqm | 42.23 | 42.23 | 14.4 | False | None | None | False | None | False | 608.112 | 0 |
| 3097086 | 106497 | None | code32 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 108.15 | 108.15 | 14.4 | False | None | None | False | None | False | 1557.36 | 0 |
| 3097087 | 106497 | None | code33 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding | Kg | 134.93 | 134.93 | 748.8 | False | None | None | False | None | False | 101035.584 | 0 |
| 3097088 | 106497 | None | code34 | PROVIDING & FIXING OF 2 TRACK X 2-PANEL SLIDING WINDOWS MADE OUT OF MULTI CHAMBERED UPVC(MATCHING TO RAL 9016) SECTIONS AND WITH MINIMUM TIO2(TITANIUM DIOXIDE) AT 6PHR WITH TPE(THERMO PLASTIC ELASTOMER) AND LEAD FREE, GASKETS GREY COLOUR HAVING ISOLATED DRAINAGE AND REINFORCED WITH GALVANIZED IRON PROFILE THROUGH OUT THE WINDOW FRAME. THE OUTER FRAME HAVING A OVERALL SIZE OF 60MM WIDTH X 45MMHEIGHT WITH REINFORCEMENT OF 1MM THICKNESS AND SASH WITH OVERALL SIZE OF 39MM X 58MM WITH GI REINFORCEMENT OF 1MM FOR THE FRAME AND 1.5 MM FOR THE SASH. COEXTRUDED GLAZING BEAD FOR FIXING OF GLASS SHALL BE OF SIZE 20MM X 24MM. WINDOWS SHALL BE PROVIDED WITH 5MM PLAIN FLOAT GLASS, STANDARD HARDWARE& SINGLE POINT LOCKING SYSTEM WITH TOUCH LOCK. WALL THICKNESS OF FRAME & SASH SHALL BE OF 2-2.5 MM. MAXIMUM POSSIBLE SIZE 1819MM X 1819MM (THE COST IS INCLUSIVE OF ALL FIXTURES AND SEPARATE CHARGES FOR MINOR T&P'S SHALL NOT BE MADE | Sqm | 6603.33 | 6603.33 | 36.0 | False | None | None | False | None | False | 237719.88 | 0 |
| 3097089 | 106497 | None | code35 | PROVIDING & FIXING OF LOUVERED VENTILATOR MADE OUT OF MULTI CHAMBERED UPVC(MATCHING TO RAL-9016) SECTIONS AND WITH MINIMUM TIO2 (TITANIUM DIOXIDE) AT 6PHR WITH TPE(THERMO PLASTIC ELASTOMER) AND LEAD FREE WITH GASKETS GREY COLOUR HAVING ISOLATED DRAINAGE AND REINFORCED WITH GALVANIZED IRON PROFILE THROUGH-OUT THE VENTILATOR FRAME. THE FRAME HAVING OVERALL SIZE OF 39MM X 39MM WITH GI REINFORCEMENT OF 1MM THICKNESS. LOUVER CLIP IN ALUMINIUM (POWDER COATED IN WHITE) WILL BE USED ON THE FRAME ALONG WITH PLASTIC PARTS FOR FIXING THE 4 MM PIN HEAD GLASS. WALL THICKNESS OF FRAME SHALL BE 2MM.MAXIMUM POSSIBLE SIZE 1000MM X 1000MM.(THE COST IS INCLUSIVE OF ALL FIXTURES AND SEPARATE CHARGES FOR MINOR T&P'S SHALL NOT BE MADE) | Sqm | 5016.1 | 5016.1 | 1.44 | False | None | None | False | None | False | 7223.184 | 0 |
| 3097090 | 106497 | None | code36 | Providing and fixing Stainless Steel staircase raling with hand rail 50mm dia 16 gauge hallow pipe welded to vertical hollow 50mm dia pipe of 16 gauge, stainless stell vertical pipe spacecd at 1.2m regular intervals, and 5 nos of 25mm dia. Stainless steel hollow horizontal pipe are welded to vertical 50mm dia hollow pipe. The entire assembly is fixed to concrete by using expansion bolts by drilling concrete etc. complete including cost of all materials, labour, HOM of machineries, and electrical charges etc., complete as per specifications. | Kg | 515.0 | 515.0 | 91.8 | False | None | None | False | None | False | 47277.0 | 0 |
| 3097091 | 106497 | None | code37 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Special primer applied @ 0.75 ltr /10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. do with primer | Sqm | 121.54 | 121.54 | 913.19 | False | None | None | False | None | False | 110989.1126 | 0 |
| 3097092 | 106497 | None | code38 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 135.96 | 135.96 | 479.72 | False | None | None | False | None | False | 65222.7312 | 0 |
| 3097093 | 106497 | None | code39 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 92.7 | 92.7 | 37.44 | False | None | None | False | None | False | 3470.688 | 0 |
| 3097094 | 106497 | None | code40 | Providing and fixing Aluminium fixtures like Aldrops of size 300x16mm, Tower Bolts of size 200x12mm, 100mm length oxidised iron Hinges, Handles of size 150mm, Door Stopper, Locking arrangements & Door Bush of aprroved make and quality including cost and Conveyance of all materials and as per thre direction of EIC of work with all lead and lift and directed by the engineer in charge of works. Double Shutter.(oxidised Iron Hinges -4),(Door Stopper 1 ), (Tower Bolt-2), Handles-2), (Aldrops-1), (Brass Door Bush -1),Locking Arrangements-1). | Nos | 5888.98 | 5888.98 | 1.0 | False | None | None | False | None | False | 5888.98 | 0 |
| 3097095 | 106497 | None | code41 | Providing and fixing Aluminium fixtures like Aldrops of size 300x16mm, Tower Bolts of size 200x12mm, 100mm length oxidised iron Hinges, Handles of size 150mm, Door Stopper, Locking arrangements & Door Bush of aprroved make and quality including cost and Conveyance of all materials and as per thre direction of EIC of work with all lead and lift and directed by the engineer in charge of works. Single Shutter.(oxidised Iron Hinges -4),(Door Stopper 1 ), (Tower Bolt-2), Handles-2), (Aldrops-1), (Brass Door Bush -1),Locking Arrangements-1). | Nos | 3812.71 | 3812.71 | 6.0 | False | None | None | False | None | False | 22876.26 | 0 |
| 3097096 | 106497 | None | code42 | Forming horizontal or vertical grooves on uniform size 10 mm wide and 7 mm deep at junction of wall and column / beam and finishing the grooves to elevation etc, including cost of materials , labour floor fixing, HOM of equipments and machineries all leads and lift loading and unloading, transportation , all other incidental charges at all floor levels etc, complete all as per specifications and as directed by the Engineer in charge. | Mtr | 18.64 | 18.64 | 321.6 | False | None | None | False | None | False | 5994.624 | 0 |
| 3097097 | 106497 | None | code43 | TERRACE FLOOR Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness,
well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as pertechnical specifications. Rate is inclusive of frame work, centring and scaffolding. (the cost of steel reinforment shall be paid separately). Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates Column | Cum | 10130.03 | 10130.03 | 4.91 | False | None | None | False | None | False | 49738.4473 | 0 |
| 3097098 | 106497 | None | code44 | Providing Thermo-Mechanically Treated bars of grade Fe-550 or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) | Kg | 95.71 | 95.71 | 1079.1 | False | None | None | False | None | False | 103280.661 | 0 |
| 3097099 | 106497 | None | code45 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. | Sqm | 1244.2 | 1244.2 | 73.58 | False | None | None | False | None | False | 91548.236 | 0 |
| 3097100 | 106497 | None | code46 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Rate is inclusive of frame work, centring and scaffolding. (the cost of steel reinforment shall be paid separately). Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates Coping Bead | Cum | 5958.84 | 5958.84 | 38.37 | False | None | None | False | None | False | 228640.6908 | 0 |
| 3097101 | 106497 | None | code47 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 257.99 | 257.99 | 179.85 | False | None | None | False | None | False | 46399.5015 | 0 |
| 3097102 | 106497 | None | code48 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 137.32 | 137.32 | 179.85 | False | None | None | False | None | False | 24697.002 | 0 |
| 3097103 | 106497 | None | code49 | Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of
construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. | Sqm | 775.02 | 775.02 | 489.75 | False | None | None | False | None | False | 379566.045 | 0 |
| 3097104 | 106497 | None | code50 | Water Supply Works Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fitting including fixing the pipe with clamps at 1.00m spacing. This including jointing of pipes & fitting with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. internal works - Exposed on wall 40mm Dia | Mtr | 550.02 | 550.02 | 50.0 | False | None | None | False | None | False | 27501.0 | 0 |
| 3097105 | 106497 | None | code51 | Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fitting including fixing the pipe with clamps at 1.00m spacing. This including jointing of pipes & fitting with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. internal works - Exposed on wall 50mm Dia | Mtr | 790.01 | 790.01 | 50.0 | False | None | None | False | None | False | 39500.5 | 0 |
| 3097106 | 106497 | None | code52 | Providing and fixing Brass full way valve gate with C.I wheel of approved quality (screwed end) 25mm dia | Nos | 543.84 | 543.84 | 2.0 | False | None | None | False | None | False | 1087.68 | 0 |
| 3097107 | 106497 | None | code53 | Providing and fixing Brass full way valve gate with C.I wheel of approved quality (screwed end) 40mm dia | Nos | 701.43 | 701.43 | 1.0 | False | None | None | False | None | False | 701.43 | 0 |
| 3097108 | 106497 | None | code54 | Providing and fixing Brass full way valve gate with C.I wheel of approved quality (screwed end) 50mm dia | Nos | 859.02 | 859.02 | 1.0 | False | None | None | False | None | False | 859.02 | 0 |
| 3097109 | 106497 | None | code55 | Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fitting including fixing the pipe with clamps at 1.00m spacing. This including jointing of pipes & fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25mm nominal dia Pipes | Mtr | 490.28 | 490.28 | 25.0 | False | None | None | False | None | False | 12257.0 | 0 |
| 3097110 | 106497 | None | code56 | Providing and laying flooring and steps fine dressed granite stone slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. | Sqm | 2454.49 | 2454.49 | 1.44 | False | None | None | False | None | False | 3534.4656 | 0 |
| 3097111 | 106497 | None | code57 | Cutting hole up to 30x30 cm in walls including making good the same With common burnt clay F.P.S (non modular) Bricks | Each | 273.98 | 273.98 | 2.0 | False | None | None | False | None | False | 547.96 | 0 |
| 3097112 | 106497 | None | code58 | Cutting holes up to 15x15cm in R.C.C flooring for roofs for passing drain pipe etc. and repairing the hole after inserting of drain pipe etc. with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) including finishing complete so as to make it leak proof. | Mtr | 250.29 | 250.29 | 0.15 | False | None | None | False | None | False | 37.5435 | 0 |
| 3097113 | 106497 | None | code59 | Providing and placing on terrace (at all floor levels) polyethene water storage tanks, IS : 12701 marked, with cover and suitable locking arrangements, making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 2000 ltrs capacity for Domestic | l | 8.24 | 8.24 | 2000.0 | False | None | None | False | None | False | 16480.0 | 0 |
| 3097114 | 106497 | None | code60 | Providing and fixing brass bib cock of approved quality 20mm Dia | Nos | 355.35 | 355.35 | 4.0 | False | None | None | False | None | False | 1421.4 | 0 |
| 3097115 | 106497 | None | code61 | Providing and fixing brass stop cock of approved quality 15 mm nominal bore | Nos | 335.78 | 335.78 | 11.0 | False | None | None | False | None | False | 3693.58 | 0 |
| 3097116 | 106497 | None | code62 | Sanitary Works Earth work excavation for pipeline trenches in all kinds of soils bymechanical means above 600 mm trench width as per drawing andtechnical specifications, including setting out, construction of shoring,strutting, barricading, caution lights, bracing, using sight rails & boningrods at every 100 mm whevere necessary as directed, removal ofstumps and other deleterious matter, dressing of sides and levellingthe bottom of trench to the extent required , utilising the availableexcavated earth locally for the work etc., and all other appurtenancescomplete in the following strata. | Cum | 199.82 | 199.82 | 32.22 | False | None | None | False | None | False | 6438.2004 | 0 |
| 3097117 | 106497 | None | code63 | Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m.Including cost of all labour complete as per specifications | Cum | 125.66 | 125.66 | 31.5 | False | None | None | False | None | False | 3958.29 | 0 |
| 3097118 | 106497 | None | code64 | Supplying, lowering, laying, jointing, testing and commissioning of Glazed Stone Ware Pipes of following dia, conforming to IS 651:1992, IS 4127 with latest amendments, including conveying to work site, caulking with hemp dipped in tar and jointing with CM 1:1.5 using OPC, perfect linking and curing for 10 days and testing with water etc. with all lead, lifts and as per Technical Specifications. The cost to include the cost of all jointing materials, necessary survey works for laying of sewer lines etc. complete. The contractor will make own arrangements for procuring water for testing. 100mm dia pipes | Mtr | 302.82 | 302.82 | 40.0 | False | None | None | False | None | False | 12112.8 | 0 |
| 3097119 | 106497 | None | code65 | Supplying, lowering, laying, jointing, testing and commissioning of Glazed Stone Ware Pipes of following dia, conforming to IS 651:1992, IS 4127 with latest amendments, including conveying to work site, caulking with hemp dipped in tar and jointing with CM 1:1.5 using OPC, perfect linking and curing for 10 days and testing with water etc. with all lead, lifts and as per Technical Specifications. The cost to include the cost of all jointing materials, necessary survey works for laying of sewer lines etc. complete. The contractor will make own arrangements for procuring water for testing. 150mm dia pipes | Mtr | 479.98 | 479.98 | 35.0 | False | None | None | False | None | False | 16799.3 | 0 |
| 3097120 | 106497 | None | code66 | Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. Note: Upto 110mm dia Coil shall be used. For Grade PE80 PN6.0 : HDPE Grade PE80-PN6.0, 75mm dia | Mtr | 246.38 | 246.38 | 30.92 | False | None | None | False | None | False | 7618.0696 | 0 |
| 3097121 | 106497 | None | code67 | Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A, including jointing with seal ring conforming to : 5382, leaving 10mm gap for thermal expansion, (i) single socketed pipes 75mm diameter | Mtr | 182.31 | 182.31 | 45.0 | False | None | None | False | None | False | 8203.95 | 0 |
| 3097122 | 106497 | None | code68 | providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A, including jointing with seal ring conforming to : 5382, leaving 10mm gap for thermal expansion, (i) single socketed pipes 100mm diameter | Mtr | 260.59 | 260.59 | 45.0 | False | None | None | False | None | False | 11726.55 | 0 |
| 3097123 | 106497 | None | code69 | Providing and fixing white vitreous china pedestal type water closet(European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid | Each | 5155.15 | 5155.15 | 4.0 | False | None | None | False | None | False | 20620.6 | 0 |
| 3097124 | 106497 | None | code70 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern | Each | 3642.08 | 3642.08 | 3.0 | False | None | None | False | None | False | 10926.24 | 0 |
| 3097125 | 106497 | None | code71 | Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth. urinal partitions | Sqm | 1660.36 | 1660.36 | 1.8 | False | None | None | False | None | False | 2988.648 | 0 |
| 3097126 | 106497 | None | code72 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever
required: using White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer | Each | 3706.97 | 3706.97 | 4.0 | False | None | None | False | None | False | 14827.88 | 0 |
| 3097127 | 106497 | None | code73 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | Each | 1000.13 | 1000.13 | 4.0 | False | None | None | False | None | False | 4000.52 | 0 |
| 3097128 | 106497 | None | code74 | Providing and fixing square - mouth S.W. gully trap class SP-1 complete with C.I grating brick masonry chamber 150 x 100mm size P type With non modular common burnt clay brick of designation 3.5 & with water tight C.I cover with frame of 300 x 300mm size (inside) the weight of cover to be not less than 4.5kg and frame to be not less than 2.70kg as per standard design.15cms X 10cms | Each | 2367.97 | 2367.97 | 2.0 | False | None | None | False | None | False | 4735.94 | 0 |
| 3097129 | 106497 | None | code75 | Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.. | Each | 5126.31 | 5126.31 | 4.0 | False | None | None | False | None | False | 20505.24 | 0 |
| 3097130 | 106497 | None | code76 | Provoding & fixing testing and commissioning u PVC multi inlet floor trap conforming to IS 13592 with required P C support placed to required level as per site condition complete. 110mm dia inlet 75mm dia outlet , Make: PRINCE / ASHIRWAD / SUPREME / equivalent 12.5cms X 7.5 cms | Each | 146.61 | 146.61 | 6.0 | False | None | None | False | None | False | 879.66 | 0 |
| 3097131 | 106497 | None | code77 | Providing, fixing, testing and commissioning of PVC Vent Cowl with PVC Pipe and necessary accessories etc. Complete. | Each | 360.17 | 360.17 | 2.0 | False | None | None | False | None | False | 720.34 | 0 |
| 3097132 | 106497 | None | code78 | Providing and fixing Testing and commissioning of CP Health faucet consisting of 1 No. 15mm dia CP Angle cock with wall flage.PVC flexible tube of 1m long tube with end nuts. Hand operated spray unit (instent type)CP Crutch etc, complete as directed by the Engineer in charge. | Nos | 1183.9 | 1183.9 | 4.0 | False | None | None | False | None | False | 4735.6 | 0 |
| 3097133 | 106497 | None | code79 | Providing and fixing Double coat hook Fixed on the Toilet Door as directed by the Engineer. in charge. | Nos | 505.08 | 505.08 | 4.0 | False | None | None | False | None | False | 2020.32 | 0 |
| 3097134 | 106497 | None | code80 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m | Cum | 75.19 | 75.19 | 3.89 | False | None | None | False | None | False | 292.4891 | 0 |
| 3097135 | 106497 | None | code81 | Supplying to work spot rolling, lowering and placing in position RCC perforated rings in the already excavated pit including loading and
unloading at both the destinations with all lead and lift with appurtenances., complete. 1200 mmx1250 mm | Each | 9631.53 | 9631.53 | 3.0 | False | None | None | False | None | False | 28894.59 | 0 |
| 3097136 | 106497 | None | code82 | Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 41O plain slotted (having slot of size 1.613.2 mm) mild steel threaded and socketed/ plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of antlcorroslve bltumastlc paint of approved brand and manufacture, lncluding usage & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer -in-charge.
200MM DIA | Mtr | 1644.91 | 1644.91 | 15.0 | False | None | None | False | None | False | 24673.65 | 0 |
| 3097137 | 106497 | None | code83 | Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. | Cum | 988.8 | 988.8 | 2.59 | False | None | None | False | None | False | 2560.992 | 0 |
| 3097138 | 106497 | None | code84 | Gravel packing in tube well construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading
& sizes as per actual requirement, all complete as per direction of Engineer-in-charge. | Cum | 412.0 | 412.0 | 1.3 | False | None | None | False | None | False | 535.6 | 0 |
| 3097139 | 106497 | None | code85 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances
required to complete the work as per technical specifications. Rate is inclusive of frame work, centring and scaffolding. (the cost of steel reinforment shall be paid separately). M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 9181.94 | 9181.94 | 0.2 | False | None | None | False | None | False | 1836.388 | 0 |
| 3097140 | 106497 | None | code86 | Supplying, Fitting and Placing TMT Fe 550 & above Reinforcement in Foundation / Substructure / Superstructure complete as per Drawing and Technical Specifications. | Kg | 82.7 | 82.7 | 12.32 | False | None | None | False | None | False | 1018.864 | 0 |
| 3097141 | 106497 | None | code87 | Point wiring using Copper wire without Switch. Supplying and wiring adopting loop system in existing pvc conduit/casing caping using 1100v grade,COPPER conducter flexible multistrand FRLS PVC insulated,2x1.5Sq.mm Cable confirming to the GTP without switch,the other end of the wire shall be terminated with sufficient loose length in a wood/PVC round block complete for each outlet. Short point upto 3Mtr from tapping point to out let via switch box | Nos | 251.0 | 251.0 | 5.0 | False | None | None | False | None | False | 1255.0 | 0 |
| 3097142 | 106497 | None | code88 | Supplying and wiring adopting loop system in existing pvc conduit/casing caping using 1100v grade,COPPER conducter flexible multistrand FRLS PVC insulated,2x1.5Sq.mm Cable confirming to the GTP without switch,the other end of the wire shall be terminated with sufficient loose length in a wood/PVC round block complete for each outlet. Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box | Nos | 361.0 | 361.0 | 6.0 | False | None | None | False | None | False | 2166.0 | 0 |
| 3097143 | 106497 | None | code89 | Supplying and wiring adopting loop system in existing pvc conduit/casing caping using 1100v grade,COPPER conducter flexible multistrand FRLS PVC insulated,2x1.5Sq.mm Cable confirming to the GTP without switch,the other end of the wire shall be terminated with sufficient loose length in a wood/PVC round block complete for each outlet. Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box | Nos | 542.0 | 542.0 | 8.0 | False | None | None | False | None | False | 4336.0 | 0 |
| 3097144 | 106497 | None | code90 | Supplying and wiring adopting loop system in existing pvc conduit/casing caping using 1100v grade,COPPER conducter flexible multistrand FRLS PVC insulated,2x1.5Sq.mm Cable confirming to the GTP without switch,the other end of the wire shall be terminated with sufficient loose length in a wood/PVC round block complete for each outlet. Two outlet in a row,above 3Mtr upto 6Mtr from tapping point to out let via switches | Nos | 671.0 | 671.0 | 7.0 | False | None | None | False | None | False | 4697.0 | 0 |
| 3097145 | 106497 | None | code91 | Supplying and wiring adopting loop system in existing pvc conduit/casing caping using 1100v grade,COPPER conducter flexible multistrand FRLS PVC insulated,2x1.5Sq.mm Cable confirming to the GTP without switch,the other end of the wire shall be terminated with sufficient loose length in a wood/PVC round block complete for each outlet. Three outlet in a row, above 6Mts upto 10Mtr from tapping point to out let via switches box | Nos | 979.0 | 979.0 | 17.0 | False | None | None | False | None | False | 16643.0 | 0 |
| 3097146 | 106497 | None | code92 | METAL BOX Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1-3Way | Each | 123.0 | 123.0 | 15.0 | False | None | None | False | None | False | 1845.0 | 0 |
| 3097147 | 106497 | None | code93 | Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4-5Way | Each | 138.0 | 138.0 | 6.0 | False | None | None | False | None | False | 828.0 | 0 |
| 3097148 | 106497 | None | code94 | Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6 Way | Each | 212.0 | 212.0 | 8.0 | False | None | None | False | None | False | 1696.0 | 0 |
| 3097149 | 106497 | None | code95 | Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8Way | Each | 250.0 | 250.0 | 5.0 | False | None | None | False | None | False | 1250.0 | 0 |
| 3097150 | 106497 | None | code96 | Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12Way | Each | 325.0 | 325.0 | 15.0 | False | None | None | False | None | False | 4875.0 | 0 |
| 3097151 | 106497 | None | code97 | Suppling and fixing PVC/metal conduit deep juction boxes 19/20mm deep juction box | Each | 49.0 | 49.0 | 50.0 | False | None | None | False | None | False | 2450.0 | 0 |
| 3097152 | 106497 | None | code98 | Suppling and fixing PVC/metal conduit deep juction boxes 25mm deep juction box | Each | 51.0 | 51.0 | 75.0 | False | None | None | False | None | False | 3825.0 | 0 |
| 3097153 | 106497 | None | code99 | Suppling and fixing PVC/metal conduit deep juction boxes 32mm deep juction box | Each | 69.0 | 69.0 | 5.0 | False | None | None | False | None | False | 345.0 | 0 |
| 3097154 | 106497 | None | code100 | Suppling and fixing PVC/metal conduit deep juction boxes Suplay and fixing Metal Fan Box with Round Hook | Each | 163.0 | 163.0 | 30.0 | False | None | None | False | None | False | 4890.0 | 0 |
| 3097155 | 106497 | None | code101 | Supplying and mounting 2 nos of 2 way 6amps flush type switches either surface /flush mounted on exisinting gang box or in 4mm thick plastic sheet and mounted on a flush mounted wooden box and wiring as required | Each | 162.0 | 162.0 | 2.0 | False | None | None | False | None | False | 324.0 | 0 |
| 3097156 | 106497 | None | code102 | Supplying and fixing superior gality modular switch mounting polycorbonate plate with neceaary supporting back plate with rquired nos. of machine screwes, bolts nuts etc., complete on the existing metal/PVC box. 'A' Group 1 to 3 Module | Each | 152.0 | 152.0 | 15.0 | False | None | None | False | None | False | 2280.0 | 0 |
| 3097157 | 106497 | None | code103 | Supplying and fixing superior gality modular switch mounting polycorbonate plate with neceaary supporting back plate with rquired nos. of machine screwes, bolts nuts etc., complete on the existing metal/PVC box. 'A' Group 4 Module | Each | 175.0 | 175.0 | 6.0 | False | None | None | False | None | False | 1050.0 | 0 |
| 3097158 | 106497 | None | code104 | Supplying and fixing superior gality modular switch mounting polycorbonate plate with neceaary supporting back plate with rquired nos. of machine screwes, bolts nuts etc., complete on the existing metal/PVC box. 'A' Group 6 Module | Each | 244.0 | 244.0 | 8.0 | False | None | None | False | None | False | 1952.0 | 0 |
| 3097159 | 106497 | None | code105 | Supplying and fixing superior gality modular switch mounting polycorbonate plate with neceaary supporting back plate with rquired nos. of machine screwes, bolts nuts etc., complete on the existing metal/PVC box. 'A' Group 8 Module | Each | 302.0 | 302.0 | 5.0 | False | None | None | False | None | False | 1510.0 | 0 |
| 3097160 | 106497 | None | code106 | Supplying and fixing superior gality modular switch mounting polycorbonate plate with neceaary supporting back plate with rquired nos. of machine screwes, bolts nuts etc., complete on the existing metal/PVC box. 'A' Group 10-12 Module | Each | 363.0 | 363.0 | 15.0 | False | None | None | False | None | False | 5445.0 | 0 |
| 3097161 | 106497 | None | code107 | Modular switch/Socket Supplying and fixing of modular switch/Socket/stepped electeonic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Using Group 'A' materials 6A mps one way | Each | 88.0 | 88.0 | 95.0 | False | None | None | False | None | False | 8360.0 | 0 |
| 3097162 | 106497 | None | code108 | Supplying and fixing of modular switch/Socket/stepped electeonic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Using Group 'A' materials 6A mps Two way | Each | 152.0 | 152.0 | 2.0 | False | None | None | False | None | False | 304.0 | 0 |
| 3097163 | 106497 | None | code109 | Supplying and fixing of modular switch/Socket/stepped electeonic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Using Group 'A' materials 6A mps 3way socket. | Each | 162.0 | 162.0 | 12.0 | False | None | None | False | None | False | 1944.0 | 0 |
| 3097164 | 106497 | None | code110 | Supplying and fixing of modular switch/Socket/stepped electeonic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Using Group 'A' materials Stepped fan regulator. | Each | 313.0 | 313.0 | 35.0 | False | None | None | False | None | False | 10955.0 | 0 |
| 3097165 | 106497 | None | code111 | Supplying and fixing of modular switch/Socket/stepped electeonic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Using Group 'A' materials 16Amps one way switch | Each | 249.0 | 249.0 | 8.0 | False | None | None | False | None | False | 1992.0 | 0 |
| 3097166 | 106497 | None | code112 | Supplying and fixing of modular switch/Socket/stepped electeonic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Using Group 'A' materials 6/16Amps univeral socket | Each | 249.0 | 249.0 | 8.0 | False | None | None | False | None | False | 1992.0 | 0 |
| 3097167 | 106497 | None | code113 | Supplying and fixing of modular switch/Socket/stepped electeonic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Using Group 'A' materials TV/Telephone socket | Each | 147.0 | 147.0 | 4.0 | False | None | None | False | None | False | 588.0 | 0 |
| 3097168 | 106497 | None | code114 | Concealed Conduit System: Supplying …. Mm dia 2mm2.5mm Thick heavy gauge PVC conduit pipe with suitable size bends, metal/PVC junction boxes adhesive paste etc… and running before concreting th eslab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be convered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary 19/20mm dia 2mm thik | Mtr | 61.0 | 61.0 | 800.0 | False | None | None | False | None | False | 48800.0 | 0 |
| 3097169 | 106497 | None | code115 | Supplying …. Mm dia 2mm2.5mm Thick heavy gauge PVC conduit pipe with suitable size bends, metal/PVC junction boxes adhesive paste etc… and running before concreting th eslab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be convered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary 25mm dia 2mm thik | Mtr | 70.0 | 70.0 | 650.0 | False | None | None | False | None | False | 45500.0 | 0 |
| 3097170 | 106497 | None | code116 | Supplying …. Mm dia 2mm2.5mm Thick heavy gauge PVC conduit pipe with suitable size bends, metal/PVC junction boxes adhesive paste etc… and running before concreting th eslab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be convered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary 32mm dia 2.5mm thik | Mtr | 93.0 | 93.0 | 100.0 | False | None | None | False | None | False | 9300.0 | 0 |
| 3097171 | 106497 | None | code117 | Groove cutting: Supplying …. Mm dia 2mm2.5mm Thick heavy gauge PVC conduit pipe with suitable size bends, metal/PVC junction boxes adhesive paste etc… by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. 19/20mm dia 2mm thik | Mtr | 75.0 | 75.0 | 200.0 | False | None | None | False | None | False | 15000.0 | 0 |
| 3097172 | 106497 | None | code118 | Groove cutting: Supplying …. Mm dia 2mm2.5mm Thick heavy gauge PVC conduit pipe with suitable size bends, metal/PVC junction boxes adhesive paste etc… by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. 25mm dia 2mm thik | Mtr | 80.0 | 80.0 | 175.0 | False | None | None | False | None | False | 14000.0 | 0 |
| 3097173 | 106497 | None | code119 | Groove cutting: Supplying …. Mm dia 2mm2.5mm Thick heavy gauge PVC conduit pipe with suitable size bends, metal/PVC junction boxes adhesive paste etc… by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. 32mm dia 2.5mm thik | Mtr | 105.0 | 105.0 | 75.0 | False | None | None | False | None | False | 7875.0 | 0 |
| 3097174 | 106497 | None | code120 | Wiring for lighting /power circuit using one of PVC insulated 1100v grade,multis and Copper conductor single core cable in open or consealed system of wiring. I Group A Materials. 1.5 sqmm | Mtr | 26.0 | 26.0 | 900.0 | False | None | None | False | None | False | 23400.0 | 0 |
| 3097175 | 106497 | None | code121 | Wiring for lighting /power circuit using one of PVC insulated 1100v grade,multis and Copper conductor single core cable in open or consealed system of wiring. I Group A Materials. 2.5 sqmm | Mtr | 40.0 | 40.0 | 1300.0 | False | None | None | False | None | False | 52000.0 | 0 |
| 3097176 | 106497 | None | code122 | Wiring for lighting /power circuit using one of PVC insulated 1100v grade,multis and Copper conductor single core cable in open or consealed system of wiring. I Group A Materials. 4 sqmm | Mtr | 59.0 | 59.0 | 200.0 | False | None | None | False | None | False | 11800.0 | 0 |
| 3097177 | 106497 | None | code123 | Wiring for lighting /power circuit using one of PVC insulated 1100v grade,multis and Copper conductor single core cable in open or consealed system of wiring. I Group A Materials. 6 sqmm | Mtr | 87.0 | 87.0 | 240.0 | False | None | None | False | None | False | 20880.0 | 0 |
| 3097178 | 106497 | None | code124 | MCB & DBs Supplying and fixing regular MCB distribution boards on wall/ woodboard /flush mounting required clamps,bolts,nuts etc.. with provision for fixing suitable type capacity MCB's single phase /3 phase /single door with powder coated painting etc., complete II. Double Door 1) Group 'A' 8Way SP & N | Each | 1695.0 | 1695.0 | 1.0 | False | None | None | False | None | False | 1695.0 | 0 |
| 3097179 | 106497 | None | code125 | Supplying and fixing regular MCB distribution boards on wall/ woodboard /flush mounting required clamps,bolts,nuts etc.. with provision for fixing suitable type capacity MCB's single phase /3 phase /single door with powder coated painting etc., complete II. Double Door 1) Group 'A' 6Way TP & N | Each | 3735.0 | 3735.0 | 1.0 | False | None | None | False | None | False | 3735.0 | 0 |
| 3097180 | 106497 | None | code126 | Supplying and fixing and wiring Earth Leakage Miniature Circuit Breaker [RCCB] 240/450V up 300mA sensitivity on exsiting wood/panel board. 32-40 Amps 2 Pole | Each | 4831.0 | 4831.0 | 1.0 | False | None | None | False | None | False | 4831.0 | 0 |
| 3097181 | 106497 | None | code127 | Supplying and fixing and wiring Earth Leakage Miniature Circuit Breaker [RCCB] 240/450V up 300mA sensitivity on exsiting wood/panel board. 32-40 Amps 4 Pole | Each | 4677.0 | 4677.0 | 1.0 | False | None | None | False | None | False | 4677.0 | 0 |
| 3097182 | 106497 | None | code128 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and wiring complete as required. 6-32Amps SP | Each | 523.0 | 523.0 | 15.0 | False | None | None | False | None | False | 7845.0 | 0 |
| 3097183 | 106497 | None | code129 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and wiring complete as required. 6-32Amps DP | Each | 1103.0 | 1103.0 | 2.0 | False | None | None | False | None | False | 2206.0 | 0 |
| 3097184 | 106497 | None | code130 | Earthing Supplying, fixing, wiring, earth electrode for grounding
conduits, I.C. cutouts and other equipment's on the meter
board using 40mm dia 2.90mm thick GI pipe 2.5 mtr
long buried in a pit … The pit should be filled with equal
proportion of salt and charcoal 150mm all-round the pipe to
complete depth. The connection from the pipe to the conduit
etc., is to be established through GI wire of size as per ISI
specification 7.3.3. of IS 732 using 12mm dia bolts, nuts,
washers and check nuts etc., the pipe shall have 16 through
holes of 12 mm dia | Nos | 2999.7 | 2999.7 | 1.0 | False | None | None | False | None | False | 2999.7 | 0 |
| 3097185 | 106497 | None | code131 | Supplying fixing and wiring earth electrode for grounding
of lifts, transformers, DG sets etc. using 40mm dia 2.9mm
thick 2.5 mtr long GI pipe with GI funnel with mesh and
suitable size reducer fixed on the top of the earth electrode.
The funnel should be enclosed in a CC chamber of
400x400x400mm with a cast iron cover. The earth electrode
shall have staggered holes of 12mm dia and the electrode
should be covered 150mm all-round with alternate layers of
salt and charcoal from the bottom of the CC chamber. The
connection from the electrode is to be established through
GI strip using GI bolts and nuts. | Nos | 4150.0 | 4150.0 | 1.0 | False | None | None | False | None | False | 4150.0 | 0 |
| 3097186 | 106497 | None | code132 | Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. GI strip Copper strip 8SWG copper wire | Mtr | 107.7 | 107.7 | 60.0 | False | None | None | False | None | False | 6462.0 | 0 |
| 3097187 | 106497 | None | code133 | LIGHT FIXTURES : Supplying & fixing cast Aluminium round or oblong type bulk head fitting with GI wire guard,glass cover with 15 watts 230V CFL lamp | Each | 68.0 | 68.0 | 4.0 | False | None | None | False | None | False | 272.0 | 0 |
| 3097188 | 106497 | None | code134 | Supplying of 2 feet LED PVC square batten with high quality diffuser with ife of 25000 burninng hours & 70% lumen maintance with CRI80. power input :220-240V @ 50 hz & power factor greater .9 along with CE approved drivers. 5 years warranty LED light fitting 1x2' -9/10w | Each | 496.0 | 496.0 | 2.0 | False | None | None | False | None | False | 992.0 | 0 |
| 3097189 | 106497 | None | code135 | Supplying of 2 feet LED PVC square batten with high quality diffuser with ife of 25000 burninng hours & 70% lumen maintance with CRI greater than 80. power input :220-240V @ 50 hz & power factor greater than 0.9 along with CE approved drivers. 5 years warranty LED light fitting 1x4' -20/22w | Each | 740.0 | 740.0 | 50.0 | False | None | None | False | None | False | 37000.0 | 0 |
| 3097190 | 106497 | None | code136 | Supplying of recess/Surface mounting non integrated type LED down light ...... W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clamps, LED of Power/COB with CCT 6500 degree K,CRI 70%. efficacy 100 lumen per watt, 120degree beam spread, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhancesthe lighting level. LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 10-12W | Each | 835.0 | 835.0 | 5.0 | False | None | None | False | None | False | 4175.0 | 0 |
| 3097191 | 106497 | None | code137 | Supplying exhaust fan of 1440 RPM of 300 mm (12'') size with bracket blades complete for light duty suitable for operate of 230V 50Hz, AC Supply.. Group 'A' | Each | 1542.0 | 1542.0 | 2.0 | False | None | None | False | None | False | 3084.0 | 0 |
| 3097192 | 106497 | None | code138 | Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double bail bearing system. 48" Sweep (1200mm) Regular model (Khaitan, Crompton Greaves, Orient, Polar, Bajaj, Usha, Havells, Almonard) | Each | 2085.0 | 2085.0 | 35.0 | False | None | None | False | None | False | 72975.0 | 0 |
| 3097193 | 106497 | None | code139 | Fixing all types and all capacities of fluorescent / fales ceiling /spot light /CFL / LED fittings indoor on the wall /ceiling / refters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamps . On wall / ceiling / Rafter / Girders | Each | 119.0 | 119.0 | 61.0 | False | None | None | False | None | False | 7259.0 | 0 |
| 3097194 | 106497 | None | code140 | Fixing a ceiling / wall mounting fan of all capacities and all types to the existing 's' hook with fan regulator to the existing board together with supplying and fixiting 5amps . Ceiling rose, necessary length of 23/0.0076 inch PVC insulated twin twisted copper wire and wiring . | Each | 162.0 | 162.0 | 37.0 | False | None | None | False | None | False | 5994.0 | 0 |
| 3097195 | 106497 | None | code141 | UG CABLES Supplying of LT UG cable having aluminium conductor PVC insulated, sheathed, galvanised, steel wire/steel tap armoured cable with PVC outer sheathing 1.1 KV class I.Class 'A' PVC Cable 4 core 10 sqmm for( All existing bloks) | Mtr | 130.0 | 130.0 | 110.0 | False | None | None | False | None | False | 14300.0 | 0 |
| 3097196 | 106497 | None | code142 | Supplying tinnd copper lugs and crimping and wiring to terminal point for wire of the following sizes 10 sqmm | Each | 8.0 | 8.0 | 4.0 | False | None | None | False | None | False | 32.0 | 0 |
| 3097197 | 106497 | None | code143 | Supplying and fixingof heavy duty cable glands suitable or UG cable o 1.1KV class (metal only) 25 mm dia | Each | 84.0 | 84.0 | 6.0 | False | None | None | False | None | False | 504.0 | 0 |
| 3097198 | 106497 | None | code144 | Supply & fixing of Caution/Danger name board as per drawing( BESCOM SR . CDS-1) | Each | 194.0 | 194.0 | 2.0 | False | None | None | False | None | False | 388.0 | 0 |
| 3097199 | 106497 | None | code145 | Providing and filling sand in excavated trench to cover already laid UG cable to a depth of 150mm alround the cable. | Mtr | 100.0 | 100.0 | 80.0 | False | None | None | False | None | False | 8000.0 | 0 |
| 3097200 | 106497 | None | code146 | Digging of trench of 0.6m deep x 0.50 mtr wide refiling the trench to the required ground level and consolidating etc., complete. In soil (Ordinary) | Mtr | 76.0 | 76.0 | 80.0 | False | None | None | False | None | False | 6080.0 | 0 |
| 3097201 | 106497 | None | code147 | 57.09) PVC pipe-100mm dia (Page No 20of 40 Sl no:452) | Mtr | 128.0 | 128.0 | 10.0 | False | None | None | False | None | False | 1280.0 | 0 |