createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1710505026712 version 6 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 5000.00 emd 1500000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 15-04-2024 17:00:00 tenderQueryClose 05-04-2024 17:00:00 technicalBidOpen 17-04-2024 17:00:00 publishedDate 15-03-2024 20:02:36 publishedByPost GESCOM_EE_CIV_KLB publishedByUser KPE20330 - THIPPANNA bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate 05-04-2024 11:00:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson THIPPANNA splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 9480010352 mobileNumber 9480010352 tenderSupplierList None
tenderSchedule	createdTs 1710505026814 version 4 createdDate None modifiedDate None tenderNumber GESCOM/2023-24/BD/WORK_INDENT75 title Construction of Division office building at Bidar. description Construction of Division office building at Bidar. category WORKS categoryText Works ecv 100000000.00 deptName Gulbarga Electricity Supply Company Limited status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 3944 locationName GESCOM Chief Engineer Operations Corporate Office Gulbarga provisionalAmount 100000000.0 groupOverheadTotal 14297915.57 fileNumber GESCOM/CEE(O)/EE(C)/AEE(C)/2023-24/1
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1710505027000 0 None None Buildings Construction of Division office building at Bidar. 85702084.43 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3095927 106458 None code01 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. (PWD DSR 2023-2024 IT NO. 1.12, PNO.8) Cum 99.75 99.75 201.6 False None None False None False 20109.6 0 3095928 106458 None code02 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work (PWD DSR 2023-2024 It. No. 1.14.1, P. No. 8 Cum 107.1 107.1 2587.1 False None None False None False 277078.41 0 3095929 106458 None code03 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work.(PWD DSR 2023-2024 IT NO.1.15.2, PNO.9) Depth exceeding 1.5m, but not exceeding 3 m Cum 446.25 446.25 770.3 False None None False None False 343746.375 0 3095930 106458 None code04 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. (PWD DSR 2023-2024 It. No. 4.1, P. No. 5) Sqm 123.9 123.9 900.0 False None None False None False 111510.0 0 3095931 106458 None code05 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates (PWD DSR 2023-2024 IT NO. 2.1.2, PNO.15) Cum 5947.2 5947.2 103.82 False None None False None False 617438.304 0 3095932 106458 None code06 Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front end loader at OMC and compacting with vibratory roller to achieve the desired density, complete as per clause 401 For Grading -I Material (PWD DSR 2023-2024 IT NO. 4.2.i, PNO.23) Cum 2478.0 2478.0 151.51 False None None False None False 375441.78 0 3095933 106458 None code07 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates (PWD DSR 2023-2024 IT NO. 2.1.6, PNO.15) Cum 6555.15 6555.15 101.07 False None None False None False 662529.0105 0 3095934 106458 None code08 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD DSR 2023-2024 IT. NO. 2.4.3, Pg.16) Cum 6652.8 6652.8 402.6725 False None None False None False 2678899.608 0 3095935 106458 None code09 Formwork for Foundation 8% of finised rate of concrete Cum 532.22 532.22 402.6725 False None None False None False 214310.35795 0 3095936 106458 None code10 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for Column (PWD DSR 2023-2024 IT. NO. 2.5.2, Pg.-16) Cum 7185.15 7185.15 27.77 False None None False None False 199531.6155 0 3095937 106458 None code11 Formwork for Columns & piers Cum 5029.6 5029.6 27.77 False None None False None False 139671.992 0 3095938 106458 None code12 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD DSR 2023-2024 IT. NO. 2.5.2, Pg.-16) for Tie Beam Cum 7185.15 7185.15 22.89 False None None False None False 164468.0835 0 3095939 106458 None code13 Formwork for Beams & Lintels Cum 3592.57 3592.57 22.89 False None None False None False 82233.9273 0 3095940 106458 None code14 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD DSR 2023-2024 IT. NO. 2.5.2, Pg.-16) for Tie BeamLintel Cum 7185.15 7185.15 1.292 False None None False None False 9283.2138 0 3095941 106458 None code15 Formwork for Beams & Lintels Cum 4311.09 4311.09 1.29 False None None False None False 5561.3061 0 3095942 106458 None code16 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD DSR 2023-2024 IT. NO. 2.5.2, Pg.-16) forRoof Beam Cum 7185.15 7185.15 49.79 False None None False None False 357748.6185 0 3095943 106458 None code17 Formwork for Beams & Lintels Cum 4311.09 4311.09 49.79 False None None False None False 214649.1711 0 3095944 106458 None code18 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD DSR 2023-2024 IT. NO. 2.5.2, Pg.-16) forRoof Slab Cum 7185.15 7185.15 132.32 False None None False None False 950739.048 0 3095945 106458 None code19 Formwork for Roof Cum 3592.57 3592.57 132.32 False None None False None False 475368.8624 0 3095946 106458 None code20 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD DSR 2023-2024 IT. NO. 2.5.2, Pg.-16) forStair Cum 7185.15 7185.15 3.88 False None None False None False 27878.382 0 3095947 106458 None code21 Formwork for stair Cum 3592.57 3592.57 3.88 False None None False None False 13939.1716 0 3095948 106458 None code22 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD DSR 2023-2024 IT. NO. 2.5.2, Pg.-16) forRCC wall Cum 7185.15 7185.15 70.88 False None None False None False 509283.432 0 3095949 106458 None code23 Formwork for Wall Cum 5029.6 5029.6 70.88 False None None False None False 356498.048 0 3095950 106458 None code24 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification (PWD DSR 2023-2024 IT NO. 2.11.A, PNO. 18) Tonne 93930.0 93930.0 78.793 False None None False None False 7401026.49 0 3095951 106458 None code25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m..(PWD DSR 2023-2024 IT NO. 1.9, PNO. 7) Cum 279.3 279.3 715.04 False None None False None False 199710.672 0 3095952 106458 None code26 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. (PWD DSR 2023-2024 It. No. 6.8, P. No. 14) Cum 8367.45 8367.45 22.65 False None None False None False 189522.7425 0 3095953 106458 None code27 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates (PWD DSR 2023-2024 IT NO. 2.1.4, PNO.15) Cum 6527.85 6527.85 0.87 False None None False None False 5679.2295 0 3095954 106458 None code28 Providing and laying Cement concrete pavement with 1:2:4 for commercial & residential building floors, hardpaths, footpaths using 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size, including finishing complete as per Engineer incharge. (PWD DSR 2023-2024 IT NO. 9.4, PNO.59) Cum 6999.3 6999.3 97.07 False None None False None False 679422.051 0 3095955 106458 None code29 Extra for making chequers of approved pattern on 1:2:4 cement concrete floors, steps, landing, pavements etc.(PWD DSR 2023-2024 IT NO. 9.5, PNO.59) Sqm 57.75 57.75 970.7881 False None None False None False 56063.012775 0 3095956 106458 None code30 Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm (PWD DSR 2023-2024 It. no. 9.12.2, p.no. 60) Sqm 1202.25 1202.25 45.4 False None None False None False 54582.15 0 3095957 106458 None code31 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. (PWD DSR 2023-2024 It. no. 9.24, p.no. 63) Sqm 2994.6 2994.6 23.5155 False None None False None False 70419.5163 0 3095958 106458 None code32 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD DSR 2023-2024 ITEM NO. 8.10 P.NO. 43) Sqm 221.55 221.55 1964.88 False None None False None False 435319.164 0 3095959 106458 None code33 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD DSR 2023-2024 ITEM NO. 8.10 P.NO. 43) external Sqm 221.5 221.5 339.183 False None None False None False 75129.0345 0 3095960 106458 None code34 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(PWD DSR 2023-2024 ITEM NO. 8.5.2 P.NO. 42) Sqm 366.45 366.45 222.65 False None None False None False 81590.0925 0 3095961 106458 None code35 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge (2023-2024 ITEM NO. 8.39 P.NO. 48) Sqm 133.35 133.35 1848.32 False None None False None False 246473.472 0 3095962 106458 None code36 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. (PWD DSR 2023-2024 It. No. 8.8, P. No.42) Sqm 389.55 389.55 159.57 False None None False None False 62160.4935 0 3095963 106458 None code37 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD DSR 2023-2024 It. No. 8.30, P. No.46) Sqm 182.7 182.7 278.758 False None None False None False 50929.0866 0 3095964 106458 None code38 Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications. (PWD DSR 2023-2024 It. No. 12.12, P. No.99) Cum 130412.1 130412.1 0.19 False None None False None False 24778.299 0 3095965 106458 None code39 Clamps - MS (SL.NO 541) Nos 58.8 58.8 18.0 False None None False None False 1058.4 0 3095966 106458 None code40 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.30 mm thick both side commercial (PWD DSR 2023-2024 It. No. 12.57.3, P. No.104) Sqm 3155.25 3155.25 6.3 False None None False None False 19878.075 0 3095967 106458 None code41 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.(PWD DSR 2023-2024 It. No. 12.60, P. No.105) Nos 1104.6 1104.6 3.0 False None None False None False 3313.8 0 3095968 106458 None code42 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD DSR 2023-2024 It. No. 8.41, P. No.48) Sqm 175.35 175.35 6.3 False None None False None False 1104.705 0 3095969 106458 None code43 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) (PWD DSR 2023-2024 It. No. 12.90, P. No.110) Sqm 7070.7 7070.7 57.59 False None None False None False 407201.613 0 3095970 106458 None code44 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(PWD DSR 2023-2024 It. No. 11.28, P. No.85) Kg 593.25 593.25 81.36 False None None False None False 48266.82 0 3095971 106458 None code45 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat withapproved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. (PWD DSR 2023-2024 It. No. 11.34B, P. No.86) Kg 192.15 192.15 1549.8 False None None False None False 297794.07 0 3095972 106458 None code46 Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.. (PWD DSR 2023-2024 It. No. 11.25.2, P. No.84) Kg 142.8 142.8 369.411 False None None False None False 52751.8908 0 3095973 106458 None code47 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD DSR 2023-2024 It. No. 8.41, P. No.48) Sqm 175.35 175.35 224.07 False None None False None False 39290.6745 0 3095974 106458 None code48 Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. (PWD DSR 2023-2024 It. No. 10.2, P. No.69) Mtr 344.4 344.4 36.75 False None None False None False 12656.7 0 3095975 106458 None code49 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. Sqm 857.85 857.85 882.2 False None None False None False 756795.27 0 3095976 106458 None code50 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for COLUMN (PWD DSR 2023-2024 IT. NO. 2.5.2, Pg.-16) Cum 7185.15 7185.15 26.21 False None None False None False 188322.7815 0 3095977 106458 None code51 Formwork for Columns Sqm 5029.6 5029.6 26.21 False None None False None False 131825.816 0 3095978 106458 None code52 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for COLUMN (PWD DSR 2023-2024 IT. NO. 2.5.2, Pg.-16) for Lintel Cum 7185.15 7185.15 9.95 False None None False None False 71492.2425 0 3095979 106458 None code53 Formwork for Beams & Lintels Sqm 4311.09 4311.09 9.95 False None None False None False 42895.3455 0 3095980 106458 None code54 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for COLUMN (PWD DSR 2023-2024 IT. NO. 2.5.2, Pg.-16) Roof Beam Cum 7185.15 7185.15 46.76 False None None False None False 335977.614 0 3095981 106458 None code55 Formwork for Beams & Lintels Sqm 4311.09 4311.09 46.76 False None None False None False 201586.5684 0 3095982 106458 None code56 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for COLUMN (PWD DSR 2023-2024 IT. NO. 2.5.2, Pg.-16) Roof Slab Cum 7185.15 7185.15 115.745 False None None False None False 831645.18675 0 3095983 106458 None code57 Formwork for Roof Sqm 3592.57 3592.57 115.74 False None None False None False 415804.0518 0 3095984 106458 None code58 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for COLUMN (PWD DSR 2023-2024 IT. NO. 2.5.2, Pg.-16) Stair Cum 7185.15 7185.15 8.79 False None None False None False 63157.4685 0 3095985 106458 None code59 Formwork for stair Sqm 3592.57 3592.57 8.79 False None None False None False 31578.6903 0 3095986 106458 None code60 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD DSR 2023-2024 IT. NO. 2.5.2, Pg.-16) Cum 7185.15 7185.15 2.38 False None None False None False 17100.657 0 3095987 106458 None code61 Formwork for chejja Sqm 3233.31 3233.31 2.38 False None None False None False 7695.2778 0 3095988 106458 None code62 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification (PWD DSR 2021-2022 IT NO. 2.11.A, PNO. 18) Tonne 93929.85 93929.85 32.949 False None None False None False 3094894.62765 0 3095989 106458 None code63 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. (PWD DSR 2023-2024 It. No. 6.8, P. No. 14) Cum 8367.45 8367.45 154.69 False None None False None False 1294360.8405 0 3095990 106458 None code64 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 (1 cement :3 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.(PWD DSR 2023-2024 It. No. 6.14, P. No. 14) Sqm 1113.0 1113.0 124.8 False None None False None False 138902.4 0 3095991 106458 None code65 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates (PWD DSR 2023-2024 IT NO. 2.1.4, PNO.15) Cum 6527.85 6527.85 1.69 False None None False None False 11032.0665 0 3095992 106458 None code66 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. (PWD DSR 2023-2024 It. no. 9.24, p.no. 63) Sqm 2994.6 2994.6 820.0 False None None False None False 2455572.0 0 3095993 106458 None code67 Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth. (PWD DSR 2023-2024 It. no. 10.8, p.no.70) Sqm 2928.45 2928.45 4.05 False None None False None False 11860.2225 0 3095994 106458 None code68 Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. (PWD DSR 2023-2024 It. no. 10.1.1, p.no.69) Sqm 4206.3 4206.3 4.05 False None None False None False 17035.515 0 3095995 106458 None code69 Providing and fixing of wall cladding using 20mm thick gang saw water cut Shiva gold granite, grey granite in CM 1:3 (1 cement : 3 coarse sand) proportion cut to required shape, pattern with paper joints, finished with cement mortal using white cement and colour pigments to match the colour of slab making through jointing with sealant, making holes 25mmx12mm grooves in joints including cost of all materials, mortar, labour, curing etc., complete. (PWD DSR 2023-2024 It. no. 10.18, p.no.71) Sqm 3526.95 3526.95 30.972 False None None False None False 109236.6954 0 3095996 106458 None code70 Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) with Acid and alkali resistant tile (PWD DSR 2023-2024 It. No. 9.7.1., P. No. 59) Sqm 1308.3 1308.3 64.4064 False None None False None False 84262.89312 0 3095997 106458 None code71 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on Newterrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU aterproofing membrane that is highly elastic with elongation greater than400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. (PWD DSR 2023-2024 It. No. 15.1., P. No. 148) Sqm 857.85 857.85 63.3084 False None None False None False 54309.11094 0 3095998 106458 None code72 Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) with Acid and alkali resistant tile (PWD DSR 2023-2024 It. No. 9.7.2., P. No. 59) Sqm 1323.0 1323.0 220.04 False None None False None False 291112.92 0 3095999 106458 None code73 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD DSR 2023-2024 ITEM NO. 8.2.1 P.NO. 41) Sqm 309.75 309.75 220.04 False None None False None False 68157.39 0 3096000 106458 None code74 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD DSR 2023-2024 ITEM NO. 8.10 P.NO. 43) Sqm 221.55 221.55 1234.48 False None None False None False 273499.044 0 3096001 106458 None code75 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD DSR 2023-2024 ITEM NO. 8.10 P.NO. 43) Sqm 221.55 221.55 67.43 False None None False None False 14939.1165 0 3096002 106458 None code76 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(PWD DSR 2023-2024 ITEM NO. 8.5.2 P.NO. 42) Sqm 366.45 366.45 1385.73 False None None False None False 507800.7585 0 3096003 106458 None code77 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge..(2023-2024 ITEM NO. 8.51 P.NO. 50) Sqm 105.0 105.0 2620.22 False None None False None False 275123.1 0 3096004 106458 None code78 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge (2023-2024 ITEM NO. 8.39 P.NO. 48) Sqm 133.35 133.35 2620.22 False None None False None False 349406.337 0 3096005 106458 None code79 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. (PWD DSR 2023-2024 It. No. 8.8, P. No.42) Sqm 389.55 389.55 435.966 False None None False None False 169830.5553 0 3096006 106458 None code80 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD DSR 2023-2024 It. No. 8.30, P. No.46) Sqm 182.7 182.7 503.4 False None None False None False 91971.18 0 3096007 106458 None code81 Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications. (PWD DSR 2023-2024 It. No. 12.12, P. No.99) Cum 130412.1 130412.1 0.69 False None None False None False 89984.349 0 3096008 106458 None code82 Clamps - MS (SL.NO 541) Nos 58.8 58.8 66.0 False None None False None False 3880.8 0 3096009 106458 None code83 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.30 mm thick both side commercial (PWD DSR 2023-2024 It. No. 12.57.3, P. No.104) Sqm 3155.25 3155.25 31.91 False None None False None False 100684.0275 0 3096010 106458 None code84 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.(PWD DSR 2023-2024 It. No. 12.60, P. No.105) Nos 1104.6 1104.6 13.0 False None None False None False 14359.8 0 3096011 106458 None code85 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD DSR 2023-2024 It. No. 8.41, P. No.48) Sqm 175.35 175.35 31.91 False None None False None False 5595.4185 0 3096012 106458 None code86 Providing Teak wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications. (PWD DSR 2021-2022 It. No. 12.10, P. No.97) Cum 247431.45 247431.45 0.22 False None None False None False 54434.919 0 3096013 106458 None code87 Clamps - MS (SL.NO 541) Nos 58.8 58.8 6.0 False None None False None False 352.8 0 3096014 106458 None code88 Providing and fixing in position fully panelled Teak wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures) (PWD DSR 2021-2022 It. No. 12.14, P. No.98) Sqm 9800.7 9800.7 5.76 False None None False None False 56452.032 0 3096015 106458 None code89 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.(PWD DSR 2023-2024 It. No. 12.60, P. No.105) Nos 1104.6 1104.6 1.0 False None None False None False 1104.6 0 3096016 106458 None code90 Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: (PWD DSR 2023-2024 It. No. 8.82, P. No.54) Sqm 710.85 710.85 12.95 False None None False None False 9205.5075 0 3096017 106458 None code91 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately) Size 62 x 100mm (PWD DSR 2023-2024 It. No. 12.93.1, P. No.111) Mtr 737.1 737.1 44.55 False None None False None False 32837.805 0 3096018 106458 None code92 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum (PWD DSR 2023-2024 It. No. 12.94.1, P. No.112) 30 mm thickness Sqm 3695.84 3695.84 14.175 False None None False None False 52388.532 0 3096019 106458 None code93 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) (PWD DSR 2023-2024 It. No. 12.90, P. No.110) Sqm 7070.7 7070.7 77.184 False None None False None False 545744.9088 0 3096020 106458 None code94 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(PWD DSR 2023-2024 It. No. 11.28, P. No.85) Kg 593.25 593.25 257.12 False None None False None False 152536.44 0 3096021 106458 None code95 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat withapproved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. (PWD DSR 2023-2024 It. No. 11.34B, P. No.86) Kg 192.15 192.15 1620.864 False None None False None False 311449.0176 0 3096022 106458 None code96 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD DSR 2023-2024 It. No. 8.41, P. No.48) Sqm 175.35 175.35 192.95 False None None False None False 33833.7825 0 3096023 106458 None code97 Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. (PWD DSR 2023-2024 It. No. 10.2, P. No.69) Mtr 344.4 344.4 234.94 False None None False None False 80913.336 0 3096024 106458 None code98 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications. (PWD DSR 2023-2024 It. No. 11.35.2.3, P. No.88) Kgs 611.1 611.1 349.25 False None None False None False 213426.675 0 3096025 106458 None code99 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge: Pre-laminated particle board with decorative lamination on both sides including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.. (PWD DSR 2023-2024 It. No. 11.36.2, P. No.89) Sqm 1032.15 1032.15 69.85 False None None False None False 72095.6775 0 3096026 106458 None code100 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/m²) including cost of materials, labour, usage charges of machinery complete as per specifications. (PWD DSR 2023-2024 It. No. 11.37.2, P. No.89) Sqm 1229.55 1229.55 69.85 False None None False None False 85884.0675 0 3096027 106458 None code101 Providing and fixing double action hydraulic floor spring of approved embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge: With brass cover plate minimum 1.25 mm thickness including cost of materials, labour, usage charges of machinery completeas per specifications.. (PWD DSR 2023-2024 It. No. 11.38.2, P. No.90) Each 2944.2 2944.2 10.0 False None None False None False 29442.0 0 3096028 106458 None code102 Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (PWD DSR 2023-2024 It. No. 9.25, P. No.63) Sqm 840.0 840.0 60.0 False None None False None False 50400.0 0 3096029 106458 None code103 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineerin- charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.(PWD DSR 2023-2024 It. No. 7.38, P. No.26) Sqm 596.4 596.4 201.35 False None None False None False 120085.14 0 3096030 106458 None code104 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (PWD DSR 2023-2024 It. No. 11.16.1, P. No.82) Kg 142.8 142.8 2013.55 False None None False None False 287534.94 0 3096031 106458 None code105 Providing and fixing in position 12mm thick plaster of paris (Gypsum anhydrous) for ceiling reinforced with hessian cloth flat surface with ceiling tiles up to a height of 5 m above floor level over aluminium strips 25mm x 6mm and rendered smooth with plaster of paris including cost of materials, labour, curing complete as per specifications. (PWD DSR 2023-2024 It. No. 7.31, P. No.25) Sqm 1229.55 1229.55 77.0621 False None None False None False 94751.705055 0 3096032 106458 None code106 Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with Decorative veneer facings of approved manufacture (PWD DSR 2023-2024 It. No. 10.11 P. No.70) Sqm 1554.0 1554.0 170.058 False None None False None False 264270.132 0 3096033 106458 None code107 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD DSR 2023-2024 IT. NO. 2.5.2, Pg.-16) Column Cum 7257.0 7257.0 27.42 False None None False None False 198986.94 0 3096034 106458 None code108 Formwork for Columns Cum 5079.9 5079.9 27.42 False None None False None False 139290.858 0 3096035 106458 None code109 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Lintel (PWD DSR 2023-2024 IT. NO. 2.5.2, Pg.-16) Cum 7257.0 7257.0 8.94 False None None False None False 64877.58 0 3096036 106458 None code110 Formwork for Beams & Lintels Cum 4354.2 4354.2 8.94 False None None False None False 38926.548 0 3096037 106458 None code111 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Roof Beam (PWD DSR 2023-2024 IT. NO. 2.5.2, Pg.-16) Cum 7257.0 7257.0 54.91 False None None False None False 398481.87 0 3096038 106458 None code112 Formwork for Beams & Lintels Cum 4354.2 4354.2 54.91 False None None False None False 239089.122 0 3096039 106458 None code113 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for Roof Slab (PWD DSR 2023-2024 IT. NO. 2.5.2, Pg.-16) Cum 7257.0 7257.0 125.18 False None None False None False 908431.26 0 3096040 106458 None code114 Formwork for Roof Cum 3628.5 3628.5 125.18 False None None False None False 454215.63 0 3096041 106458 None code115 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for Stair (PWD DSR 2023-2024 IT. NO. 2.5.2, Pg.-16) Cum 7257.0 7257.0 8.79 False None None False None False 63789.03 0 3096042 106458 None code116 Formwork for stair Cum 3628.5 3628.5 8.79 False None None False None False 31894.515 0 3096043 106458 None code117 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite / trap /basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD DSR 2023-2024 IT. NO. 2.5.2, Pg.-16) Cum 7257.0 7257.0 2.67 False None None False None False 19376.19 0 3096044 106458 None code118 Formwork for chejja Cum 3265.65 3265.65 2.677 False None None False None False 8742.14505 0 3096045 106458 None code119 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification (PWD DSR 2021-2022 IT NO. 2.11.A, PNO. 18) Tonne 94869.14 94869.14 35.96 False None None False None False 3411494.2744 0 3096046 106458 None code120 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. (PWD DSR 2023-2024 It. No. 6.8, P. No. 14) Cum 8461.72 8461.72 148.0 False None None False None False 1252334.56 0 3096047 106458 None code121 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 (1 cement :3 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.(PWD DSR 2023-2024 It. No. 6.14, P. No. 14) Sqm 1124.12 1124.12 90.15 False None None False None False 101339.418 0 3096048 106458 None code122 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates (PWD DSR 2023-2024 IT NO. 2.1.4, PNO.15) Cum 6593.12 6593.12 2.37 False None None False None False 15625.6944 0 3096049 106458 None code123 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. (PWD DSR 2023-2024 It. no. 9.24, p.no. 63) Sqm 3024.54 3024.54 726.4997 False None None False None False 2197327.402638 0 3096050 106458 None code124 Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth. (PWD DSR 2023-2024 It. no. 10.8, p.no.70) Sqm 2957.73 2957.73 4.05 False None None False None False 11978.8065 0 3096051 106458 None code125 Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. (PWD DSR 2023-2024 It. no. 10.1.1, p.no.69) Sqm 4248.36 4248.36 4.05 False None None False None False 17205.858 0 3096052 106458 None code126 Providing and fixing of wall cladding using 20mm thick gang saw water cut Shiva gold granite, grey granite in CM 1:3 (1 cement : 3 coarse sand) proportion cut to required shape, pattern with paper joints, finished with cement mortal using white cement and colour pigments to match the colour of slab making through jointing with sealant, making holes 25mmx12mm grooves in joints including cost of all materials, mortar, labour, curing etc., complete. (PWD DSR 2023-2024 It. no. 10.18, p.no.71) Sqm 3562.21 3562.21 31.15 False None None False None False 110962.8415 0 3096053 106458 None code127 Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) with Acid and alkali resistant tile (PWD DSR 2023-2024 It. No. 9.7.1., P. No. 59) Sqm 1321.38 1321.38 58.22 False None None False None False 76930.7436 0 3096054 106458 None code128 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on Newterrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU aterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. (PWD DSR 2023-2024 It. No. 15.1., P. No. 148) Sqm 866.42 866.42 57.3084 False None None False None False 49653.143928 0 3096055 106458 None code129 Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) with Acid and alkali resistant tile (PWD DSR 2023-2024 It. No. 9.7.2., P. No. 59) Sqm 1336.23 1336.23 192.22 False None None False None False 256850.1306 0 3096056 106458 None code130 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD DSR 2023-2024 ITEM NO. 8.2.1 P.NO. 41) Sqm 312.84 312.84 192.22 False None None False None False 60134.1048 0 3096057 106458 None code131 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD DSR 2023-2024 ITEM NO. 8.10 P.NO. 43) Sqm 223.76 223.76 1250.8 False None None False None False 279879.008 0 3096058 106458 None code132 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD DSR 2023-2024 ITEM NO. 8.10 P.NO. 43) external Sqm 223.76 223.76 183.86 False None None False None False 41140.5136 0 3096059 106458 None code133 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(PWD DSR 2023-2024 ITEM NO. 8.5.2 P.NO. 42) Sqm 370.11 370.11 1330.95 False None None False None False 492597.9045 0 3096060 106458 None code134 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge..(2023-2024 ITEM NO. 8.51 P.NO. 50) Sqm 106.05 106.05 2581.75 False None None False None False 273794.5875 0 3096061 106458 None code135 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge (2023-2024 ITEM NO. 8.39 P.NO. 48) Sqm 134.68 134.68 2581.75 False None None False None False 347710.09 0 3096062 106458 None code136 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. (PWD DSR 2023-2024 It. No. 8.8, P. No.42) Sqm 393.44 393.44 449.316 False None None False None False 176778.88704 0 3096063 106458 None code137 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD DSR 2023-2024 It. No. 8.30, P. No.46) Sqm 184.52 184.52 633.18 False None None False None False 116834.3736 0 3096064 106458 None code138 Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications. (PWD DSR 2023-2024 It. No. 12.12, P. No.99) Cum 131716.22 131716.22 0.59 False None None False None False 77712.5698 0 3096065 106458 None code139 Clamps - MS (SL.NO 541) Nos 58.8 58.8 54.0 False None None False None False 3175.2 0 3096066 106458 None code140 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.30 mm thick both side commercial (PWD DSR 2023-2024 It. No. 12.57.3, P. No.104) Sqm 3186.8 3186.8 26.88 False None None False None False 85661.184 0 3096067 106458 None code141 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.(PWD DSR 2023-2024 It. No. 12.60, P. No.105) Nos 1115.64 1115.64 11.0 False None None False None False 12272.04 0 3096068 106458 None code142 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD DSR 2023-2024 It. No. 8.41, P. No.48) Sqm 177.1 177.1 26.88 False None None False None False 4760.448 0 3096069 106458 None code143 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately) Size 62 x 100mm (PWD DSR 2023-2024 It. No. 12.93.1, P. No.111) Mtr 744.47 744.47 34.65 False None None False None False 25795.8855 0 3096070 106458 None code144 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum (PWD DSR 2023-2024 It. No. 12.94.1, P. No.112) 30 mm thickness Sqm 3695.84 3695.84 11.02 False None None False None False 40728.1568 0 3096071 106458 None code145 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) (PWD DSR 2023-2024 It. No. 12.90, P. No.110) Sqm 7141.4 7141.4 76.734 False None None False None False 547988.1876 0 3096072 106458 None code146 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(PWD DSR 2023-2024 It. No. 11.28, P. No.85) Kg 599.18 599.18 257.12 False None None False None False 154061.1616 0 3096073 106458 None code147 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat withapproved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. (PWD DSR 2023-2024 It. No. 11.34B, P. No.86) Kg 194.07 194.07 1611.414 False None None False None False 312727.11498 0 3096074 106458 None code148 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD DSR 2023-2024 It. No. 8.41, P. No.48) Sqm 177.1 177.1 191.83 False None None False None False 33973.093 0 3096075 106458 None code149 Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. (PWD DSR 2023-2024 It. No. 10.2, P. No.69) Mtr 347.84 347.84 236.14 False None None False None False 82138.9376 0 3096076 106458 None code150 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for Column (PWD DSR 2023-2024 IT. NO. 2.5.2, Pg.-16) Cum 7328.85 7328.85 31.0236 False None None False None False 227367.31086 0 3096077 106458 None code151 Formwork for Columns Cum 5130.19 5130.19 31.0236 False None None False None False 159156.962484 0 3096078 106458 None code152 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for Column (PWD DSR 2023-2024 IT. NO. 2.5.2, Pg.-16) for Lintel Cum 7328.85 7328.85 11.09 False None None False None False 81276.9465 0 3096079 106458 None code153 Formwork for Beams & Lintels Cum 4397.31 4397.31 11.09 False None None False None False 48766.1679 0 3096080 106458 None code154 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for Column (PWD DSR 2023-2024 IT. NO. 2.5.2, Pg.-16) Roof Beam Cum 7328.85 7328.85 56.68 False None None False None False 415399.218 0 3096081 106458 None code155 Formwork for Beams & Lintels Cum 4397.31 4397.31 56.68 False None None False None False 249239.5308 0 3096082 106458 None code156 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for Column (PWD DSR 2023-2024 IT. NO. 2.5.2, Pg.-16) for Roof Slab Cum 7328.85 7328.85 136.07 False None None False None False 997236.6195 0 3096083 106458 None code157 Formwork for Roof Cum 3664.42 3664.42 136.07 False None None False None False 498617.6294 0 3096084 106458 None code158 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for Column (PWD DSR 2023-2024 IT. NO. 2.5.2, Pg.-16) for Stair Cum 7328.85 7328.85 8.79 False None None False None False 64420.5915 0 3096085 106458 None code159 Formwork for stair Cum 3664.42 3664.42 8.79 False None None False None False 32210.2518 0 3096086 106458 None code160 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD DSR 2023-2024 IT. NO. 2.5.2, Pg.-16) Cum 7328.85 7328.85 2.3895 False None None False None False 17512.287075 0 3096087 106458 None code161 Formwork for chejja Cum 3297.98 3297.98 2.3895 False None None False None False 7880.52321 0 3096088 106458 None code162 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification (PWD DSR 2021-2022 IT NO. 2.11.A, PNO. 18) Tonne 95808.44 95808.44 38.79 False None None False None False 3716409.3876 0 3096089 106458 None code163 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. (PWD DSR 2023-2024 It. No. 6.8, P. No. 14) Cum 8556.21 8556.21 257.31 False None None False None False 2201598.3951 0 3096090 106458 None code164 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 (1 cement :3 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.(PWD DSR 2023-2024 It. No. 6.14, P. No. 14) Sqm 1135.26 1135.26 44.3985 False None None False None False 50403.84111 0 3096091 106458 None code165 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates (PWD DSR 2023-2024 IT NO. 2.1.4, PNO.15) Cum 6658.4 6658.4 3.02 False None None False None False 20108.368 0 3096092 106458 None code166 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. (PWD DSR 2023-2024 It. no. 9.24, p.no. 63) Sqm 3054.49 3054.49 827.8 False None None False None False 2528506.822 0 3096093 106458 None code167 Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth. (PWD DSR 2023-2024 It. no. 10.8, p.no.70) Sqm 2987.01 2987.01 4.05 False None None False None False 12097.3905 0 3096094 106458 None code168 Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. (PWD DSR 2023-2024 It. no. 10.1.1, p.no.69) Sqm 4290.42 4290.42 2.053 False None None False None False 8808.23226 0 3096095 106458 None code169 Providing and fixing of wall cladding using 20mm thick gang saw water cut Shiva gold granite, grey granite in CM 1:3 (1 cement : 3 coarse sand) proportion cut to required shape, pattern with paper joints, finished with cement mortal using white cement and colour pigments to match the colour of slab making through jointing with sealant, making holes 25mmx12mm grooves in joints including cost of all materials, mortar, labour, curing etc., complete. (PWD DSR 2023-2024 It. no. 10.18, p.no.71) Sqm 3597.48 3597.48 34.93 False None None False None False 125659.9764 0 3096096 106458 None code170 Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) with Acid and alkali resistant tile (PWD DSR 2023-2024 It. No. 9.7.1., P. No. 59) Sqm 1334.46 1334.46 38.6925 False None None False None False 51633.59355 0 3096097 106458 None code171 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on Newterrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU aterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. (PWD DSR 2023-2024 It. No. 15.1., P. No. 148) Sqm 875.0 875.0 946.63 False None None False None False 828301.25 0 3096098 106458 None code172 Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) with Acid and alkali resistant tile (PWD DSR 2023-2024 It. No. 9.7.2., P. No. 59) Sqm 1349.46 1349.46 163.261 False None None False None False 220314.18906 0 3096099 106458 None code173 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD DSR 2023-2024 ITEM NO. 8.2.1 P.NO. 41) Sqm 315.94 315.94 163.261 False None None False None False 51580.68034 0 3096100 106458 None code174 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD DSR 2023-2024 ITEM NO. 8.10 P.NO. 43) Sqm 225.98 225.98 1344.7723 False None None False None False 303891.644354 0 3096101 106458 None code175 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD DSR 2023-2024 ITEM NO. 8.10 P.NO. 43) external Sqm 225.98 225.98 99.19 False None None False None False 22414.9562 0 3096102 106458 None code176 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(PWD DSR 2023-2024 ITEM NO. 8.5.2 P.NO. 42) Sqm 373.77 373.77 1504.91 False None None False None False 562490.2107 0 3096103 106458 None code177 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge..(2023-2024 ITEM NO. 8.51 P.NO. 50) Sqm 107.1 107.1 2849.68 False None None False None False 305200.728 0 3096104 106458 None code178 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge (2023-2024 ITEM NO. 8.39 P.NO. 48) Sqm 136.01 136.01 2849.68 False None None False None False 387584.9768 0 3096105 106458 None code179 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. (PWD DSR 2023-2024 It. No. 8.8, P. No.42) Sqm 397.34 397.34 1073.38 False None None False None False 426496.8092 0 3096106 106458 None code180 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD DSR 2023-2024 It. No. 8.30, P. No.46) Sqm 186.35 186.35 1172.57 False None None False None False 218508.4195 0 3096107 106458 None code181 Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications. (PWD DSR 2023-2024 It. No. 12.12, P. No.99) Cum 133020.34 133020.34 0.76 False None None False None False 101095.4584 0 3096108 106458 None code182 Clamps - MS (SL.NO 541) Nos 58.8 58.8 84.0 False None None False None False 4939.2 0 3096109 106458 None code183 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.30 mm thick both side commercial (PWD DSR 2023-2024 It. No. 12.57.3, P. No.104) Sqm 3218.35 3218.35 32.07 False None None False None False 103212.4845 0 3096110 106458 None code184 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.(PWD DSR 2023-2024 It. No. 12.60, P. No.105) Nos 1126.69 1126.69 14.0 False None None False None False 15773.66 0 3096111 106458 None code185 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD DSR 2023-2024 It. No. 8.41, P. No.48) Sqm 178.85 178.85 32.07 False None None False None False 5735.7195 0 3096112 106458 None code186 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately) Size 62 x 100mm (PWD DSR 2023-2024 It. No. 12.93.1, P. No.111) Mtr 751.84 751.84 29.7 False None None False None False 22329.648 0 3096113 106458 None code187 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum (PWD DSR 2023-2024 It. No. 12.94.1, P. No.112) 30 mm thickness Sqm 3732.43 3732.43 9.45 False None None False None False 35271.4635 0 3096114 106458 None code188 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) (PWD DSR 2023-2024 It. No. 12.90, P. No.110) Sqm 7212.11 7212.11 88.11 False None None False None False 635459.0121 0 3096115 106458 None code189 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(PWD DSR 2023-2024 It. No. 11.28, P. No.85) Kg 605.11 605.11 257.12 False None None False None False 155585.8832 0 3096116 106458 None code190 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat withapproved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. (PWD DSR 2023-2024 It. No. 11.34B, P. No.86) Kg 195.99 195.99 1963.71 False None None False None False 384867.5229 0 3096117 106458 None code191 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD DSR 2023-2024 It. No. 8.41, P. No.48) Sqm 178.85 178.85 233.77 False None None False None False 41809.7645 0 3096118 106458 None code192 Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut forkitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. (PWD DSR 2023-2024 It. No. 10.1.2, P. No.69) Sqm 4216.52 4216.52 5.37 False None None False None False 22642.7124 0 3096119 106458 None code193 Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab , including cost of materials, labour, curing, polishing complete as per specifications.. (PWD DSR 2023-2024 It. No. 9.36, P. No.64) Sqm 1767.15 1767.15 8.97 False None None False None False 15851.3355 0 3096120 106458 None code194 Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. (PWD DSR 2023-2024 It. No. 10.2, P. No.69) Mtr 351.28 351.28 248.1 False None None False None False 87152.568 0 3096121 106458 None code195 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (PWD DSR 2023-2024 It. No. 11.16.1, P. No.82) Kg 145.65 145.65 791.35 False None None False None False 115260.1275 0 3096122 106458 None code196 Providing and fixing 6mm Clear/opal white/solar bronze/blue/green tinted Multi wall poly carbonate sheet for Tubular structure. The work including cost of all materials, labour charges and usage charges of machinery for cutting, welding, grinding and erection equipments, with all lead, transportation, loading and unloading and all other incidental charges etc. complete as per specification and directions of the Engineer in charge of the work. (PWD DSR 2023-2024 It. No. 7.34, P. No.26) Sqm 3346.87 3346.87 79.135 False None None False None False 264854.55745 0 3096123 106458 None code197 Providing and fixing in position 12mm thick plaster of paris (Gypsum anhydrous) for ceiling reinforced with hessian cloth flat surface with ceiling tiles up to a height of 5 m above floor level over aluminium strips 25mm x 6mm and rendered smooth with plaster of paris including cost of materials, labour, curing complete as per specifications. (PWD DSR 2023-2024 It. No. 7.31, P. No.25) Sqm 1254.14 1254.14 235.96 False None None False None False 295926.8744 0 3096124 106458 None code198 Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with Decorative veneer facings of approved manufacture (PWD DSR 2023-2024 It. No. 10.11 P. No.70) Sqm 1585.08 1585.08 236.38 False None None False None False 374681.2104 0 3096125 106458 None code199 Providing and fixing of Aluminium composite panel of approved make and colour for wall cladding for Brick/Rcc/stone walls & coloumns /beams with necessary aluminium frame works at required level made out of 50x25x4mm C section or equivalent. The panel should consist of 3mm thick non-halogenated FR grade mineral based polymer ( 2 hrs fire resistance as per ASTM E119-12 and clause B, S1, do as per ENT 13501-1sandwiched between 0.50 skins thick aluminium sheet making a total panel thickness of 4mm. The surfaces will be finished with PVDF based coating on topsides and service coating on reverse sides would be in polyester paint. The system shall be fixed using GI brackets, aluminium L cleats and stainless steel bolts and nuts complete with spring washer and cap nuts and all other necessary accessories, sealing shall be done with necessary rods etc., complete (PWD DSR 2023-2024 It. No. 10.15 P. No.71) Sqm 4272.21 4272.21 535.799 False None None False None False 2289045.84579 0 3096126 106458 None code200 Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including:(a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cumsmoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including:(b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium (PWD DSR 2023-2024 It. No. 18.2 P. No.181) Sqm 2875.63 2875.63 100.57 False None None False None False 289202.1091 0 3096127 106458 None code201 Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved drawings of Chief Architect, GoK.The aluminium quality shall be as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account).The weight of aluminium extruded section shall be taken for purpose of payment. (PWD DSR 2023-2024 It. No. 18.1 P. No.181) Kgs 435.89 435.89 301.72 False None None False None False 131516.7308 0 3096128 106458 None code202 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work (PWD DSR 2023-2024 It. No. 1.14.1, P. No. 7) Cum 107.1 107.1 31.75 False None None False None False 3400.425 0 3096129 106458 None code203 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates (PWD DSR 2023-2024 IT NO. 2.1.4, PNO.15) Cum 6527.85 6527.85 1.29 False None None False None False 8420.9265 0 3096130 106458 None code204 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD DSR 2023-2024 IT. NO. 2.4.3, Pg.16) Cum 6652.8 6652.8 1.73 False None None False None False 11509.344 0 3096131 106458 None code205 Formwork for Foundation Cum 532.22 532.22 1.73 False None None False None False 920.7406 0 3096132 106458 None code206 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD DSR 2023-2024 IT. NO. 2.5.2, Pg.-16) for RCC walls Cum 7185.15 7185.15 5.12 False None None False None False 36787.968 0 3096133 106458 None code207 Formwork for RCC walls Cum 5029.6 5029.6 5.12 False None None False None False 25751.552 0 3096134 106458 None code208 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD DSR 2023-2024 IT. NO. 2.5.2, Pg.-16) for Roof Slab Cum 7185.15 7185.15 2.312 False None None False None False 16612.0668 0 3096135 106458 None code209 Formwork for Roof Cum 3592.57 3592.57 2.312 False None None False None False 8306.02184 0 3096136 106458 None code210 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification (PWD DSR 2021-2022 IT NO. 2.11.A, PNO. 18) Kgs 93.92 93.92 1192.83 False None None False None False 112030.5936 0 3096137 106458 None code211 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD DSR 2023-2024 ITEM NO. 8.10 P.NO. 43) Sqm 221.55 221.55 42.0 False None None False None False 9305.1 0 3096138 106458 None code212 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace /Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. (PWD DSR 2023-2024 ITEM NO. 15.1 P.NO. 149) Sqm 857.85 857.85 33.0 False None None False None False 28309.05 0 3096139 106458 None code213 Rectangular cover 455x610 mm with frame (low duty) (inside) (PWD DSR 2023-2024 ITEM NO. 707 P.NO. A33) Nos 1470.0 1470.0 2.0 False None None False None False 2940.0 0 3096140 106458 None code214 Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments. 2 HP, Size 65x50 Head 13M, Discharge 462 LPM (WS&SW DSR 2023-2024 ITEM NO. 13.40.1 P.NO. 157) Nos 16390.5 16390.5 1.0 False None None False None False 16390.5 0 3096141 106458 None code215 Supply and delivery at site brand new best make starter/ control panel suitable for following HP centrifugal pump confirming with ISI mark and its latest amendments. (WS&SW DSR 2023-2024 ITEM NO. 13.43 P.NO. 157) Nos 9975.0 9975.0 1.0 False None None False None False 9975.0 0 3096142 106458 None code216 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work (PWD DSR 2023-2024 It. No. 1.14.1, P. No. 7) Cum 107.1 107.1 40.5 False None None False None False 4337.55 0 3096143 106458 None code217 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates (PWD DSR 2023-2024 IT NO. 2.1.4, PNO.15) Cum 6527.85 6527.85 1.35 False None None False None False 8812.5975 0 3096144 106458 None code218 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD DSR 2023-2024 IT. NO. 2.4.3, Pg.16) Cum 6652.8 6652.8 2.025 False None None False None False 13471.92 0 3096145 106458 None code219 Formwork for Foundation Cum 532.22 532.22 2.025 False None None False None False 1077.7455 0 3096146 106458 None code220 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite /trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for RCC walls (PWD DSR 2023-2024 IT. NO. 2.5.2, Pg.-16) Cum 7185.15 7185.15 10.08 False None None False None False 72426.312 0 3096147 106458 None code221 Formwork RCC walls Cum 5029.6 5029.6 10.08 False None None False None False 50698.368 0 3096148 106458 None code222 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite /trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for RCC walls (PWD DSR 2023-2024 IT. NO. 2.5.2, Pg.-16) for Roof Slab Cum 7185.15 7185.15 2.7 False None None False None False 19399.905 0 3096149 106458 None code223 Formwork for Roof Cum 3592.57 3592.57 2.7 False None None False None False 9699.939 0 3096150 106458 None code224 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification (PWD DSR 2023-2024 IT NO. 2.11.A, PNO. 18) Kgs 93930.0 93930.0 2.008 False None None False None False 188611.44 0 3096151 106458 None code225 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD DSR 2023-2024 ITEM NO. 8.10 P.NO. 43) Sqm 221.55 221.55 70.5 False None None False None False 15619.275 0 3096152 106458 None code226 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace /Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. (PWD DSR 2023-2024 ITEM NO. 15.1 P.NO. 149) Sqm 857.85 857.85 81.0 False None None False None False 69485.85 0 3096153 106458 None code227 Rectangular cover 455x610 mm with frame (low duty) (inside) (PWD DSR 2023-2024 ITEM NO. 707 P.NO. A33) Nos 1470.0 1470.0 2.0 False None None False None False 2940.0 0 3096154 106458 None code228 Rectangular cover 455x610 mm with frame (low duty) (inside) (PWD DSR 2023-2024 ITEM NO. 707 P.NO. A33) Total Nos 9975.0 9975.0 1.0 False None None False None False 9975.0 0 3096155 106458 None code229 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work (PWD DSR 2023-2024 It. No. 1.14.1, P. No. 8) Cum 107.1 107.1 130.17 False None None False None False 13941.207 0 3096156 106458 None code230 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates (PWD DSR 2023-2024 IT NO. 2.1.2, PNO.15) Cum 5947.2 5947.2 196.59 False None None False None False 1169160.048 0 3096157 106458 None code231 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates (PWD DSR 2023-2024 IT NO. 2.1.6, PNO.15) Cum 6555.15 6555.15 15.64 False None None False None False 102522.546 0 3096158 106458 None code232 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD DSR 2023-2024 IT. NO. 2.4.3, Pg.16) Cum 6652.8 6652.8 41.472 False None None False None False 275904.9216 0 3096159 106458 None code233 Footings Cum 532.22 532.22 41.472 False None None False None False 22072.22784 0 3096160 106458 None code234 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD DSR 2023-2024 IT. NO. 2.5.2, Pg.-16) for Column Cum 7185.15 7185.15 10.32 False None None False None False 74150.748 0 3096161 106458 None code235 Formwork for Columns Cum 5029.6 5029.6 10.326 False None None False None False 51935.6496 0 3096162 106458 None code236 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD DSR 2023-2024 IT. NO. 2.5.2, Pg.-16) for Tie Beam Cum 7185.15 7185.15 12.78 False None None False None False 91826.217 0 3096163 106458 None code237 Formwork for Beams & Lintels Cum 3592.57 3592.57 12.78 False None None False None False 45913.0446 0 3096164 106458 None code238 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification (PWD DSR 2021-2022 IT NO. 2.11.A, PNO. 18) Kgs 93929.85 93929.85 7.76 False None None False None False 728895.636 0 3096165 106458 None code239 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m..(PWD DSR 2023-2024 IT NO. 1.9, PNO. 7) Cum 279.3 279.3 218.46 False None None False None False 61015.878 0 3096166 106458 None code240 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. (PWD DSR 2023-2024 It. No. 6.8, P. No. 14) Cum 8367.45 8367.45 37.81 False None None False None False 316373.2845 0 3096167 106458 None code241 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. (PWD DSR 2023-2024 It. No. 8.8, P. No.42) Sqm 389.55 389.55 560.12 False None None False None False 218194.746 0 3096168 106458 None code242 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD DSR 2023-2024 It. No. 8.30, P. No.46) Sqm 182.7 182.7 560.12 False None None False None False 102333.924 0 3096169 106458 None code243 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat withapproved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. (PWD DSR 2023-2024 It. No. 11.34B, P. No.86) Kg 192.15 192.15 824.6 False None None False None False 158446.89 0 3096170 106458 None code244 Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.. (PWD DSR 2023-2024 It. No. 11.25.2, P. No.84) Kg 142.8 142.8 378.0 False None None False None False 53978.4 0 3096171 106458 None code245 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD DSR 2023-2024 It. No. 8.41, P. No.48) Sqm 175.35 175.35 138.66 False None None False None False 24314.031 0 3096172 106458 None code246 Concealed Conduit System : Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary PWD Ele. SR 2023-24, Pg. No. 2, It No. 1.2.1 (19/20 mm dia 2 mm thick) Rmtr 69.3 69.3 1500.0 False None None False None False 103950.0 0 3096173 106458 None code247 Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering upto the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary.PWD Ele. SR 2023-24, Pg. No. 2, It No. 1.3.1 (19/20 mm dia 2 mm thick) Rmtr 71.4 71.4 1450.0 False None None False None False 103530.0 0 3096174 106458 None code248 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:confirming to latest amendments.PWD Ele. SR 2023-24, Pg. No. 6, It No. 2.3.3 (2.5 Sqmm) Mtr 44.1 44.1 5900.0 False None None False None False 260190.0 0 3096175 106458 None code249 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.PWD Ele. SR 2023-24, Pg. No. 6, It No. 2.3.4 (4 Sqmm) Mtr 66.15 66.15 2500.0 False None None False None False 165375.0 0 3096176 106458 None code250 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall PWD Ele. SR 2023-24, Pg. No. 9, It No. 3.4.3 (4-5 way) Nos 185.85 185.85 50.0 False None None False None False 9292.5 0 3096177 106458 None code251 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall PWD Ele. SR 2023-24, Pg. No. 9, It No. 3.4.3 (8 way) Nos 274.05 274.05 70.0 False None None False None False 19183.5 0 3096178 106458 None code252 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall PWD Ele. SR 2023-24, Pg. No. 9, It No. 3.4.3 ( 10-12 way) Nos 334.95 334.95 80.0 False None None False None False 26796.0 0 3096179 106458 None code253 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.PWD Ele. SR 2023-24, Pg. No. 9, It No. 3.5.3 (4 Moule) Nos 183.75 183.75 50.0 False None None False None False 9187.5 0 3096180 106458 None code254 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.PWD Ele. SR 2023-24, Pg. No. 9, It No. 3.5.3 ( 8 Module) Nos 298.2 298.2 70.0 False None None False None False 20874.0 0 3096181 106458 None code255 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.PWD Ele. SR 2023-24, Pg. No. 9, It No. 3.5.3 (12Module) Nos 361.2 361.2 80.0 False None None False None False 28896.0 0 3096182 106458 None code256 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.PWD Ele. SR 2023-24, Pg. No. 10, It No. 3.6.1 (6A One Way Switch) Nos 107.1 107.1 800.0 False None None False None False 85680.0 0 3096183 106458 None code257 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. PWD Ele. SR 2023-24, Pg. No. 10, It No. 3.6.3 (6A Three Way socket) Nos 179.55 179.55 280.0 False None None False None False 50274.0 0 3096184 106458 None code258 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.PWD Ele. SR 2023-24, Pg. No. 10, It No. 3.6.4 (Stepped Regulator) Nos 374.85 374.85 100.0 False None None False None False 37485.0 0 3096185 106458 None code259 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.PWD Ele. SR 2023-24, Pg. No. 10, It No. 3.6.10 (6/16A Universal Socket) Nos 247.8 247.8 50.0 False None None False None False 12390.0 0 3096186 106458 None code260 Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.PWD Ele. SR 2023-24, Pg. No. 27, It No. 5.18.1 (6-32 A SP) Nos 435.75 435.75 110.0 False None None False None False 47932.5 0 3096187 106458 None code261 Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.PWD Ele. SR 2023-24, Pg. No. 28, It No. 5.19.2 (6 Way SP & N) Nos 1245.3 1245.3 12.0 False None None False None False 14943.6 0 3096188 106458 None code262 Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.PWD Ele. SR 2023-24, Pg. No. 30, It No. 5.41.2 (50 x 50 x 6 mm) Nos 414.75 414.75 10.0 False None None False None False 4147.5 0 3096189 106458 None code263 Fabricating supplying and mounting MS box made out....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clA with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete.PWD Ele. SR 2023-24, Pg. No. 30, It No. 5.42.2 Sq CM 0.45 0.45 100000.0 False None None False None False 45000.0 0 3096190 106458 None code264 Earthing : Supplying fixing wiring earth electrod for grounding conduits IC cutouts and other equipments on the meter board using 40mm dia 2.90 thick GI pipe 2.5mtrs long burried in pit. Around the pipe to the complete depth the pipe shall have 16 nos of through holes of 12 mm dia PWD Ele. SR 2023-24, Pg. No. 54, It No. 12.56 (Earthing) Nos 3685.5 3685.5 2.0 False None None False None False 7371.0 0 3096191 106458 None code265 Digging of trench of 0.6m deep X0.5mtr wide refilling the trench to the required ground level and consolidating etc., complete PWD Ele. SR 2023-24, Pg. No. 41, It No. 6.62 (In HARD Soil) Mtr 107.1 107.1 50.0 False None None False None False 5355.0 0 3096192 106458 None code266 Supplying of 1.1 Kv LT UG cable XLPE or heat resistance PVC Insulated PVC Extruded inner sheath armoured UG LT csble as per IS-1554( part-1) PWD Ele. SR 2023-24, Pg. No. 40, It No. 32.05 (4 core 16Sqmm) Mtr 148.93 148.93 250.0 False None None False None False 37232.5 0 3096193 106458 None code267 Labour Charges for laying 1.1 Kv class UG cable when supplied agency in existing trench GI pipe / Stoneware pipe/on wall/ on pole as required PWD Ele. SR 2023-24, Pg. No. 41, It No. 6.5.1 (Existing Trench / duct) Mtr 12.47 12.47 50.0 False None None False None False 623.5 0 3096194 106458 None code268 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system.48" Sweep (1200 mm) Regular model PWD Ele. SR 2023-24, Pg. No. 46, It No. 6.3 Nos 3133.2 3133.2 100.0 False None None False None False 313320.0 0 3096195 106458 None code269 Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clA and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of 23/0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired.PWD Ele. SR 2023-24, Pg. No. 80, It No. 13.10 Nos 179.55 179.55 100.0 False None None False None False 17955.0 0 3096196 106458 None code270 Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition PWD Ele. SR 2023-24, Pg. No. 64, It No. 11.3.2 Nos 724.5 724.5 200.0 False None None False None False 144900.0 0 3096197 106458 None code271 Supplying&fixingretrofittype-PL- LEDLamp......WLEDlinearsourcewithCCT6500degreeK,CRI 70%.efficacy 80lumenperW,life 25000burninghoursandCompliancetoIS10322/IEC60598,LM79&LM80.TheLEDaredrivenbyHFelectronicdriverintegratedinthesystem,withPF 0.95,powerlossshould 5 % of lamp Wage., shortcircuit & open circuitprotectiontobeintegratedinthecircuit,THDlessthan20%,LifeasperLM79.Theoperatinginputvoltageshouldbebetween130to275V.TestedbyNABL/CPRIaccreditedlaboratorywith2yearsWarrantyagainstany manufacturing defect working under standard electrical condition.PWD Ele. SR 2023-24, Pg. No. 43, It No. 11.2.2 (18-20wa) Nos 737.1 737.1 300.0 False None None False None False 221130.0 0 3096198 106458 None code272 Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clA.On wall/ ceiling / Rafter / Girders PWD Ele. SR 2023-24, Pg. No. 64, It No. 13.19 (On wall/ ceiling / Rafter / Girders) Nos 514.5 514.5 500.0 False None None False None False 257250.0 0 3096199 106458 None code273 Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mauling with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100 V to 270V 50/60Hz application. Compliance to IS 10322/ IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .... W System Power consumption. LED Efficiency 1301m/w, nominal CRI 75. Luminaire manufacturer should have in- house facility accredited by NABL / CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark / name shall be Engraved / Embossing on the die cast housing / Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source.LED Floodlight 70W PWD Ele. SR 2023-24, Pg. No. 46, It No. 11.9.1 (70W ) Nos 7106.4 7106.4 25.0 False None None False None False 177660.0 0 3096200 106458 None code274 Supplying of .. TR Invertor type split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 V with hermetically sealed inverter compressor with air cooled condenser, latest R410A / R-32 refrigerant fan motor, start & run capacitors, relay & over load protector internal unit, with one indoor & one outdoor unit The condenser unit will be placed outside the room avoid noise including standard length of suitable size copper tubing covered with nitrile rubber insulation tube. suitable capacity 3 core sheathed/ PVC copper cable and a battery operated wireless remote unit. PWD Ele. SR 2023-24, Pg. No. 31, It No. 6.8.2 (1.5 Ton capacity 3 Star) Nos 47548.2 47548.2 20.0 False None None False None False 950964.0 0 3096201 106458 None code275 Design, supplying, erecting testing and commissioning of-Passenger / Bed-cum-passenger hospital lift with speed of 1mtr per second, variable voltage variable frequency drive, with or without machine room for the available well size, operating at 415V 3phase 50cycles AC supply, powder coated / Stainless Steel car entrance door senclosures with suitable colour vinyl flooring, LED car illumination, emergency light, inter comand fan as desired by the user, central opening / sideopening door with or without attendant operation, 7segment display buttons, call register indicator, fireman drive, SShandrails insidecar, full length infrared curtain in car door, automatic rescue device with batteries, voice announcing inregional / international languages, Braille buttons with one year warranty and maintenance with necessary scaffolding and minor civil works like fixing of guide rail, counter weight etc. The total product and services shall adhere to IS14665/2016 (with latest amendments) part / section 1 to 5 with regards to general guide lines of fire safety rated doors, MRLL beams, pressures witch, manual change over for doors during emergency, ARD of 10times with sufficient battery back up and standard dimensions of chair car and door openings for all sizes and capacities of lifts including fitness certificate and duly observing all other safety norms prescribed and adhere to CPWD specifications, PCB Norms, National Electricity Code (NEC), NBC-2016, IEC and Karnataka State Lifts, Escalators and Passengers Conveyers Act 2012 and Rules 2014. The Supplier shall be registered in Government Electrical Inspectorate in the State of Karnataka. With Out Machine Room-PC Finish 13 Passengers 4 stops PWD Ele. SR 2023-24, It No. 14.3.4 Nos 1693295.53 1693295.53 1.0 False None None False None False 1693295.53 0 3096202 106458 None code276 Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, collars and cap with ncessary cutting, threading and welding including transportation of rig and supporting vehicles, crew charges, cost of consumables, cost of yield test at the final depth with a minimum working of compressor for one hour etc. complete. The cost excludes the cost of casing pipes, collars and caps etc.) for: (Above 300m of drilling add 10% for every 50m depth Comman SR, Volume-5, Pg No. 139/ SI. No. 12.2) for upto 50M m 324.45 324.45 50.0 False None None False None False 16222.5 0 3096203 106458 None code277 Borewell depth of 50 to 100 Mtrs m 406.35 406.35 50.0 False None None False None False 20317.5 0 3096204 106458 None code278 Borewell depth of 100 to 150 Mtr m 432.6 432.6 50.0 False None None False None False 21630.0 0 3096205 106458 None code279 Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner or Schlumbergers's method, including reconnaissance survey of geological formation. Geophysical investigation of existing ground water in the vicinity, its quality, quantity and acceptability of the users, indicating the location of the site, recommended depth of casing pipe required to seal the top unconsolidated formation including an extra depth of 1.0 metre in consolidated formation for proper seating of casing pipe, depth of drilling required to cover full depth of aquifer proposed to be tapped, probable yield and other information required including transportation of instruments and accessories to work site, engaging technical personal and labour required etc. NOTE: 1) Additional rate on item 1&2 is allowed for drilling in over burden and fixing Casing pipes beyond 20 M (for fixing Casing pipes only) a) Above 20 M and upto 30 M - 15%, b) Above 30 M - 30% (Measurement of overburden is restricted to the depth of casing pipe fixed excluding initial depth of 20M and projection above ground level). 2) A sum of Rs. 100/- is to be deducted for Dry Borewell towards yield tes(Comman SR, Volume-5, Pg No. 139 SI. No. 12.4) Nos 5552.4 5552.4 1.0 False None None False None False 5552.4 0 3096206 106458 None code280 Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, material and conforming to IS 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both ends.threaded conforming to IS 554-1985 one end fixed with socket conforming to IS 4270-2001 and the other end with screwed pipes all shall be responsibaly free from defects. The tubes shall be responsible straight end should be with ISI marking weighing 25.10kg/m.prices include Collar-Medium duty (Comman SR, Volume-5, Pg No. 143/ SI. No.12.32) m 2029.65 2029.65 25.0 False None None False None False 50741.25 0 3096207 106458 None code281 Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary ammendments and instructions of engineer incharge of work. For 3 HP etc. complete.(Comman SR, Volume-5, Pg No. 151/ SI. No.12.32) Each 24326.4 24326.4 1.0 False None None False None False 24326.4 0 3096208 106458 None code282 Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor type NOTE: 1) DOL- Direct Online Starter 2) S-D- Star Delta Starter etc. complete (Comman SR, Volume-5, Pg No. 154/ SI. No.13.23.1) Each 6825.0 6825.0 1.0 False None None False None False 6825.0 0 3096209 106458 None code283 Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work.. (Comman SR, Volume-5, Pg No. 156/ SI. No.13.32) Job 6825.0 6825.0 1.0 False None None False None False 6825.0 0 3096210 106458 None code284 Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. complete. NOTE: Upto 110mm dia Coil shall be used. For :HDPE PE 80 PN 6.0 HDPE Grade PE80-PN6.0, 75mm dia (Comman SR, Volume-2, Pg No.95/ SI. No.9.1.2) No 257.25 257.25 210.0 False None None False None False 54022.5 0 3096211 106458 None code285 Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments (Comman SR, Volume-5, Pg No. 154/ SI. No.13.22.3) m 141.75 141.75 240.0 False None None False None False 34020.0 0 3096212 106458 None code286 Supply and delivery at site brand new best make starter/ control panel suitable for following HP centrifugal pump confirming with ISI mark and its latest amendments. (Comman SR, Volume-5, Pg No. 157/ SI. No.13.43) Nos 9975.0 9975.0 1.0 False None None False None False 9975.0 0 3096213 106458 None code287 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid ( Page No- 131 , Item No- 14.2.1 ) Nos. 5079.9 5079.9 22.0 False None None False None False 111757.8 0 3096214 106458 None code288 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Single half stall urinal with 5 litre P.V.C. automatic flushing cistern ( Page No- 132 , Item No- 14.5.1 ) Nos. 9074.1 9074.1 12.0 False None None False None False 108889.2 0 3096215 106458 None code289 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps ( Page No- 132 , Item No- 14.7.3 ) Nos. 3009.3 3009.3 22.0 False None None False None False 66204.6 0 3096216 106458 None code290 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32mm ( Page No- 136 , Item No- 14.28.2 ) Nos. 96.6 96.6 30.0 False None None False None False 2898.0 0 3096217 106458 None code291 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 510x1040 mm bowl depth 250 mm ( Page No- 136 , Item No- 14.10.1.1 ) Nos. 5898.9 5898.9 1.0 False None None False None False 5898.9 0 3096218 106458 None code292 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. ( Page No- 136 , Item No- 14.31 ) Nos. 1281.0 1281.0 22.0 False None None False None False 28182.0 0 3096219 106458 None code293 Providing and fixing brass bib cock 20mm nominal bore (Page No- 116, Item No- 13.2.2) Nos. 320.25 320.25 60.0 False None None False None False 19215.0 0 3096220 106458 None code294 Providing and fixing unplasticised PVC connection pipe with brass union 20mm nominal bore 450 mm length of PVC connection including cost of all materials, labour and HOM of equipments with all leads complete as per specifications.( Page No-118 Item No-13.8.2.2) Nos. 115.5 115.5 22.0 False None None False None False 2541.0 0 3096221 106458 None code295 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of pproved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. ( Page No-137 Item No-14.40.2) Nos. 520.8 520.8 22.0 False None None False None False 11457.6 0 3096222 106458 None code296 Providing and fixing in position Jaquar / Hindware / Parry ware or equivalent Health faucet complete set of approved quality 20mm nominal bore including cost of all materials( Angle stop cock with flanges , flexible tube 1mtr length , hand operated spray unit ) labour and HOM of equipments with all lead, lift, loading, unloading & HOM charges etc., complete as per specifications. and directions of the Engineer-in-charge of work. ( MR) Nos 1522.5 1522.5 22.0 False None None False None False 33495.0 0 3096223 106458 None code297 Providing and fixing in position brass stop cock of approved quality 15/20mm nominal bore including cost of all materials labour and HOM of equipments with all leads complete as per specifications ( Page No -117 Item No- 13.3.2 ) Nos 320.25 320.25 22.0 False None None False None False 7045.5 0 3096224 106458 None code298 Providing and fixing PTMT pillar cock of approved quality and colour.15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms ( Page No -120 Item No- 13.20.2 ) Nos 329.7 329.7 20.0 False None None False None False 6594.0 0 3096225 106458 None code299 Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete) ( Page No- 127 , Item No- 13.59) Nos 231.0 231.0 60.0 False None None False None False 13860.0 0 3096226 106458 None code300 Providing and fixing PTMT grating of approved quality and colour. 100 mm nominal dia( Page No-120, Item No - 13.2.1.1) Nos 43.05 43.05 60.0 False None None False None False 2583.0 0 3096227 106458 None code301 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber 100mm x 100mm size P type with Non Modular common burnt clay bricks of designation 3.5& water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: ( Page No- 123 , Item No- 13.38) Nos 2658.6 2658.6 15.0 False None None False None False 39879.0 0 3096228 106458 None code302 Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.( Page No-120, Item No - 14.33) Nos 951.3 951.3 30.0 False None None False None False 28539.0 0 3096229 106458 None code303 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints com plete as per direction of Engineer in Charge. Internal work - Exposed on wall( Page No- 122, Item No- 13.31) for 20 mm dia NB Mtr 191.1 191.1 500.0 False None None False None False 95550.0 0 3096230 106458 None code304 25 mm dia NB Mtr 333.9 333.9 300.0 False None None False None False 100170.0 0 3096231 106458 None code305 32 mm dia NB Mtr 420.0 420.0 200.0 False None None False None False 84000.0 0 3096232 106458 None code306 40 mm nominal dia Pipes Mtr 562.8 562.8 200.0 False None None False None False 112560.0 0 3096233 106458 None code307 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good thewalls etc.( Page No-122, Item No- 13.32) for 20 mm dia NB Mtr 397.95 397.95 300.0 False None None False None False 119385.0 0 3096234 106458 None code308 25 mm dia NB Mtr 500.85 500.85 200.0 False None None False None False 100170.0 0 3096235 106458 None code309 32 mm dia NB Mtr 584.85 584.85 150.0 False None None False None False 87727.5 0 3096236 106458 None code310 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : :pg-117 itm 13.4 for 25 mm dia nominal bore Each 576.45 576.45 20.0 False None None False None False 11529.0 0 3096237 106458 None code311 32 mm dia nominal bore Each 627.9 627.9 20.0 False None None False None False 12558.0 0 3096238 106458 None code312 40 mm dia nominal bore Each 737.1 737.1 20.0 False None None False None False 14742.0 0 3096239 106458 None code313 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (For 1000 litre capacity) Specification No. KBS 13.22( Page No- 123 Item No- 13.34 Ltr 9.45 9.45 6000.0 False None None False None False 56700.0 0 3096240 106458 None code314 Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with lectrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. complete. NOTE: Upto 110mm dia Coil shall be used. For :HDPE PE 80 PN 6.0 ( Page No- 95,Item No-9.1) for 160mm dia Mtr 1006.95 1006.95 250.0 False None None False None False 251737.5 0 3096241 106458 None code315 110mm dia Mtr 492.45 492.45 300.0 False None None False None False 147735.0 0 3096242 106458 None code316 75mm dia Mtr 257.25 257.25 250.0 False None None False None False 64312.5 0 3096243 106458 None code317 Providing and fixing on wall face unplasticised Rigid PVC rain waterpipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i)Single socketed pipes 100 mm diameter( Page No-125, Item No- 13.48) Mtr 305.55 305.55 250.0 False None None False None False 76387.5 0 3096244 106458 None code318 Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifi cations, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work.. (PWD DSR 2023-2024 It. No. 1.6, P. No. 6 Mtr 508.2 508.2 40.0 False None None False None False 20328.0 0 3096245 106458 None code319 KSRB 12-8.1: Constructing brick masonry Inspection chamber 600x600mm and 450mm depth (clear inside dimension) for single pipeline, using table moulded non-modular bricks of class designation 50 in cement mortar 1:5, C.I cover with frame (light duty) 600x600mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23kg and weight of frame 15kg) R.C.C top slab with cement concrete M 15 with 20mm and downsize granite metal, foundation concrete M 5 with 40mm and downsize granite metal inside plastering 12mm thick with cement mortar 1:3, finish smooth with a floating coat of cement on walls and bed concrete complete as per standard design including cost of materials, labour charges, curing complete as per specifications. specifications No. KBS( Page No - 75 Item No- 11.50.2) Nos 8914.5 8914.5 15.0 False None None False None False 133717.5 0 3096246 106458 None code320 Executive Table with One side pedestal unit ( TABLE 2100x2250x750) Width of tabletop 10 mm 2100 mm Depth of tabl e 10 mm 1050 mm Height of table 10 mm 750 m ERU unit consists of 1 storage unit with shutter Total Number of drawers /storage in Pedestal units Three drawers Structure /Frame of table Gable end and modesty panel The type of Storage provided One side pedestal unit Keyboard tray Not provided Footrest Not Provided Tabletop Material MDF board of grade SBG II of IS 12406/Latest Thickness of table top material (1mm)25 mm Gable end material Flat single layerPrelaminated MDF board conforming to having designation PLMDF-23 of IS 14587/Latest The thickness of the gable end 25 mm Modesty panel material Flat single layer Prelaminated MDF board conforming to having designation PLMDF-23 of IS 14587/Latest The thickness of the modesty panel material 25 mm Leg Material NA The thickness of the Leg material NA Table top finish Laminate in color with swede finish 0.6-0.8mm thickness of type S, F or P having index no.3.2.3 conforming to IS 2046/Latest with having balancing laminate of 0.5mm thick on another side Tabletop shade Oak Table /ERU /Pedestal Panel Plain Side All exposed edges sealed with 2 mm PVC edge Product Compare Product History banding tap and all unexposededges sealed with 0.6mm edge banding tape pressed at 200 degrees C with hot meltglue ( TABLE 2100x2250x750) MATERIAL Tabletop Material Prelaminated particle board(Wood Product) of grade II type II of IS 12823/Lates Thickness of table top material ( 1 mm) 36 mm Gable end material Prelaminated particles board(wood product) of grade II type III of IS 12823/Latest The thickness of the gable end 25 mmModesty panel material Three Layer Prelaminated particles board(wood product) of grade II type III of IS 12823/Latest The thickness of the modesty panel material 18 mm Gable end and modesty panel plain side Edge to be banded with PVC tape 2 mm thick with the help of hot melt glue Table top edges Edge to be banded with PVC tape 2 mm thick with the help of hot melt glue Leg Material NA The thickness of the Leg material NA Beam Material CRC 40 mm x 40 mm Square Pipe with Powder Coated Number of buffers provided 8 Numbers at the bottom Nos 124162.0 124162.0 1.0 False None None False None False 124162.0 0 3096247 106458 None code321 Revolving Chair with Synchronic tilt mechanism High Back Office Chair Minimum width of seat 500 mm Minimum depth of seat 450 mm Minimum width of backrest 450 mm Backrest height High back (551 and above) Minimum thickness of MS Plate Joining the understructure with Seat 2 mm Minimum pedestal size (diameter) 650 mm Tilt mechanism Synchronic tilt mechanism Locking mechanism Any position Locking Armrest type and arm movement Hint: The buyer may indicate the number of ‘Up’ and ‘Down’ arm movements at the time of bid creation Adjustable (up and down) Backrest type Tilting type Pedestal Base Nylon Armrest Material PU molded over plastic inner Minimum density of foam used in seat 50 kg per cubic meter Minimum thickness of PU foam used in seat 30 mm Seat upholstery material 100 % Polyester fabric Backrest base frame material Thermoplastic elastomer frame with insert in one piece Padding at backrest NA The minimum density of foam used in the backrest NA Product Compare Product History 2 Minimum thickness of PU foam used in backrest NA Backrest upholstery material Mesh fabrics Upholstery material thickness /fabric substance used in seat /backrest Minimum 200 GSM (for Woven fabric) EE Ao and meeting hall Nos 24500.0 24500.0 8.0 False None None False None False 196000.0 0 3096248 106458 None code322 Dual Seating 25mm Othe Wood Modular Extendable Conference Table U-shape Conference Table Length of Each Seat of Work Top 20 mm 1350 mm For dual Depth of Work Top 20 mm 600 mm Table top finish Laminate in colour with swede finish 0.6-0.8 mm thickness of type S,F or P having index number 3.2.3 conforming to IS:2046/Latest with having balancing laminate of 0.5 mm thick on other side Colour of top finish As per buyer's choice SELLING UNIT SELLING UNIT IS PER SEAT. SELLER TO OFEER PRICES IN TREMS OF PRICE PER SEAT. WHILE ORDERING, BUYER TO ORDER FOR QUANTITY OF SEATS REQUIRED IN CONFERENCE TABLE. Type of Seating Offered Dual Seating Top Fixing With gable end and modesty panel using Mini Fix And Wooden Dowel By Using (Knock Down) System For Interconnecting Number of single seater 1 Number of dual seater 6 Number of corners for work top 2 Mode of Supply of modular table Knocked Down To Be Assembled At Consignee Site By The Seller Product Compare Product History 4 Material of work top 3 mm 25mm Other Wood Table top plain side Edge banded with PVC tape of 2 mm thick with help of hot melt glue Material of Gable end and modesty panel 3 mm 18 Mm Thick Three Layers Prelaminated Particle Boards Of Grade-II Type-III Of IS:12823/Latest Both Sides Particle Boards Matching With Top Shade In Grade-II Type III EE and meeting hall Per Unit 12750.0 12750.0 60.0 False None None False None False 765000.0 0 3096249 106458 None code323 Executive Table Width of tabletop 10 mm 1650 mm Depth of table 10 mm 900 mm Height of table 10 mm 750 mm Size (L x W) /diameter of leg material 5 mm 25 x 25 (mm) Structure /Frame of table Gable end and modesty panel The type of Storage provided One side pedestal unit Keyboard tray Not provided Footrest Not Provided Tabletop Material Prelaminated particle board(Wood Product) of grade II type II of IS 12823/Lates Thickness of table top material ( 1mm) 25 mm Gable end material Prelaminated particles board(wood product) of grade II type III of IS 12823/Latest The thickness of the gable end 18 mm Modesty panel material Three Layer Prelaminated particles board(wood product) of Product Compare Product History 4 grade II type III of IS 12823/Latest The thickness of the modesty panel material 18 mm ERU unit consists of no eru Total Number of drawers /storage in Pedestal units Three drawers Pedestal unit Table top finish Laminate in color with swede finish 0.6-0.8mm thickness of type S, F or P having index no.3.2.3 conforming to IS 2046/Latest with having balancing laminate of 0.5mm thick on another side Tabletop shade Peach Table /Pedestal Panel Plain Side NA Ao and Aee Nos 30962.0 30962.0 9.0 False None None False None False 278658.0 0 3096250 106458 None code324 Revolving Chair with Synchronic tilt mechanism MID BACK CHAIR Minimum width of seat 450 mm Minimum depth of seat 450 mm Minimum width of backrest 450 mm Backrest height Low back (350 to 450 mm) Minimum thickness of MS Plate Joining the understructure with Seat 2 mm Minimum pedestal size (diameter) 730 mm Tilt mechanism Synchronic tilt mechanism Locking mechanism Any position Locking Armrest type and arm movement Hint: The buyer may indicate the number of ‘Up’ and ‘Down’ arm movements at the time of bid creation Adjustable (up and down) Backrest type Fixed type Pedestal Base Nylon Armrest Material PU molded over plastic inner Minimum density of foam used in seat 30 kg per cubic meter Minimum thickness of PU foam used in seat 30 mm Seat upholstery material 100 % Polyester fabric Backrest base frame material Hot pressed plywood Padding at backrest NA The minimum density of foam used in the backrest NA Product Compare Product History 4 Minimum thickness of PU foam used in backrest NA Backrest upholstery material Mesh fabrics Upholstery material thickness /fabric substance used in seat /backrest Minimum 200 GSM (for Woven fabric) Ao and Aee and meeting hall Nos 18304.0 18304.0 39.0 False None None False None False 713856.0 0 3096251 106458 None code325 900 mm X 450 mm X 750 mm ( With one shelf ) Modular Side Storage UnitLength X Depth X Height 900 mm X 450 mm X 750 mm ( With one shelf ) Mode of Supply Knocked Down to be assembled at consignee site by the Seller Side Storage Unit top material & thickness 25 Mm Thickness Three Layer Pre Laminated Particle Boards Of Grade II Type II Of IS 12823 Latest side storage unit Top Finish Laminate In Colour with Swede Finish 0.6-0.8 Mm Thickness Conforming To IS 2046 Latest With Having Balancing Laminate Of 0.5 Mm Thick On Other Side Side Storage Unit top material & thickness 25 Mm Thickness Three Layer Pre-Laminated Particle Boards Of Grade II Type II Of IS 12823 Latest Side storage unit top to be fix with sides and bottom/ skirting using mini fix and wooden dowel by using (knock down) system for interconnecting Side storage unit gap/wrap age numbers of mini fix / dowel can be modified. All 18 mm thickness Flat single layer prelaminated MDF board conforming to having designation PLMDF - 23 of IS 14587 latestSide storage unit all sides,bottom,shelf,shutter edge to be banded With 0.8-1.0 Mm Thick PVC Tape With The Help Of Hot Melt Glue Overlapping of equal shutter overlap of 50 mm Buffer Provided Adequate Number At The Bottom Type of shutter / doors sliding shutter doors shutter doors moving on nylon wheel Push and turn lock to be provided In the center to lock both the sliding doors together Side Storage Gable end having a recess groove to accommodate 8mm MDF board Panel Side Storage Unit Two Plain Sides Shall Have Edge Banded With PVC Tape Of 2mm Thick Of Reputed Make With The Help Of Hot Melt Glue Skirting Provided 50 mm Side Storage unit two long side Shall Have Post Form Half Round Profile EE,AO Aee,AE,JE Sr asst Asst and Jn Asst Nos 10499.0 10499.0 55.0 False None None False None False 577445.0 0 3096252 106458 None code326 Revolving Chair with Synchronic tilt mechanism WITHOUT HEAD REST ) Minimum width of seat 500 mm Minimum depth of seat 450 mm Minimum width of backrest 450 mm Backrest height High back (551 and above) Minimum thickness of MS Plate Joining the understructure with Seat 2 mm Minimum pedestal size (diameter) 650 mm Tilt mechanism Synchronic tilt mechanism Locking mechanism Tilt limiter Armrest type and arm movement Hint: The buyer may indicate the number of ‘Up’ and ‘Down’ arm movements at the time of bid creation Adjustable (up and down) Backrest type Tilting type Pedestal Base Nylon Armrest Material PU molded over plastic inner Minimum density of foam used in seat 30 kg per cubic meter Minimum thickness of PU foam used in seat 30 mm Seat upholstery material 100 % Polyester fabric Backrest base frame material Hot pressed plywood Padding at backrest PU foam The minimum density of foam used in the backrest NA MATERIAL AND MATERIAL THICKNESS Pedestal Base Nylon Twin wheel castor material Nylon Number of twin wheel castor 5 Nos. Minimum diameter of twin wheel castor 50 mm Armrest Material PU molded over plastic inner Seat base material Hot pressed plywood Seat material PU foam Minimum density of foam used in seat 30 kg per cubic meter Minimum thickness of PU foam used in seat 30 mm Seat upholstery material 100 % Polyester fabric Backrest base frame material Hot pressed plywood Padding at backrest PU foam The minimum density of foam used in the backrest NA Minimum thickness of PU foam used in backrest NA Backrest upholstery material Mesh fabrics Upholstery material thickness /fabric substance used in seat /backrest Minimum 200 GSM (for Woven fabric) AE,JE and Sr Asst Nos 14160.0 14160.0 17.0 False None None False None False 240720.0 0 3096253 106458 None code327 Executive Table with One side pedestal unit DIMENSION Width of tabletop 10 mm 1200 mm Depth of table 10 mm 600 mm Height of table 10 mm 750 mm Size (L x W) /diameter of leg material 5 mm NA PEDESTAL UNIT Total Number of drawers /storage in Pedestal units Three drawers Width of Pedestal unit in mm (10 mm) 650 mm Depth of pedestal unit 10mm 400 mm Height of pedestal unit 5mm 255 mm Specifications Structure /Frame of table Gable end and modesty panel The type of Storage provided One side pedestal unit Keyboard tray Not provided Footrest Not Provided Tabletop Material Prelaminated particle board(Wood Product) of grade II type II of IS 12823/Lates Thickness of table top material ( 1 mm) 25 mm Gable end material Prelaminated particles board(wood product) of grade II type III of IS 12823/Latest The thickness of the gable end 25 mm Modesty panel material Three Layer Prelaminated par ticles board(wood product) of Product Compare Product History grade II type 4 III of IS 12823/Latest The thickness of the modesty panel material 18 mm Leg Material NA The thickness of the Leg material NA ERU unit consists of No ERU Total Number of drawers /storage in Pedestal units Three drawers Table top finish Laminate in color with swede finish 0.6-0.8mm thickness of type S, F or P having index no.3.2.3 conforming to IS 2046/Latest with having balancing laminate of 0.5mm thick on another side Tabletop shade As per Buyer's choice Table /ERU /Pedestal Panel Plain Side NA MATERIAL Tabletop Material Prelaminated particle board(Wood Product) of grade II type II of IS 12823/Lates Thickness of table top material ( 1 mm) 25 mm Gable end material Prelaminated particles board(wood product) of grade II type III of IS 12823/Latest The thickness of the gable end 25 mm Modesty panel material Three Layer Prelaminated particles board(wood product) of grade II type III of IS 12823/Latest The thickness of the modesty panel material 18 mm Gable end and modesty panel plain side Edge to be banded with PVC tape 2 mm thick with the help of hot melt glue Table top edges Edge to be banded with PVC tape 2 mm thick with the help of hot melt glue Leg Material NA The thickness of the Leg material NA Beam Material CRC 40 mm x 40 mm Square Pipe with Powder Coated Number of buffers provided 4 Numbers at the bottom AE,JE Sr asst Asst and Jn Asst Nos 23500.0 23500.0 35.0 False None None False None False 822500.0 0 3096254 106458 None code328 Non-Revolving and Non-Tilting chair with Armrest Backrest upholstered with Leatherette Seat Depth (5 mm) 480 mm Seat Width ( 5 mm) 460 mm Seat height from floor surface ( 5mm) 435 mm Backrest width ( 5 mm) 450 mm Backrest height from seat ( 5 mm) 480 mm Specifications Chair Type Non Revolving and Non Tilting chair with Armrest Chair frame type Cantilever Armrest type Continuous armrest Seat type Padded Backrest type Padded Frame Material Configuration One piece Frame material Steel tube (ERW quality) conforming to IS: 1161 (with latest Amendment) Seat material Moulded Plywood Seat material thickness 40 mm Density of Polyurethane foam used in seat (2 Kg/Cub Meter) 45 Seat upholstered with Leatherette GSM of seat cover ( 3 GSM) 390 GSM Backrest material Single piece of Cold Reduced Carbon Steel Sheet Confmg. to grade CR0 of IS:513 part 1 (with Latest amendment) Density of Polyurethane foam used in Backrest ( 2 Kg/Cub Meter) 45 FABRICATION Seat Fitted Over flat size in depth-wise of the frame on both sides with minimum 3 screws Backrest Fitted By round head screws 3 Nos. (minimum) on each side Armrest Fitted With round steel screws 3 Nos. (minimum) on each side CHAIR FRAME Frame Material Configuration One piece Frame material Steel tube (ERW quality) conforming to IS: 1161 (with latest Amendment) The shape of tubular section of frame Round Section Size (Diameter/Sides) of frame 25 mm Frame section wall thickness 2 mm ARMREST FABRICATION The armrest material Injection moulded polyurethane Armrest Padded with Foam Armrest upholstered with PU sheet Armrest material thickness 20 mm SEAT FABRICATION Seat material Moulded Plywood Seat material thickness 40 mm Seat padded Yes Density of Polyurethane foam used in seat (2 Kg/Cub Meter) 45 Seat upholstered with Leatherette GSM of seat cover ( 3 GSM) 390 GSM Polyurethane foam thickness (for seat) 50 mm Color of Seat cover Black Asst Jnr Asst Nos 10743.0 10743.0 20.0 False None None False None False 214860.0 0 3096255 106458 None code329 Non-Revolving and Non-Tilting chair with Armrest Specifi cations Chair Type Non-Revolvingand Non-Tilting chairwith Armrest Chair frame type Legs Armrest type Continuousarmrest Seat type Moulded Backrest type Moulded Frame Material Confi guration One piece Frame material Steel tube(ERW quality)conformingto IS: 1161(with latestAmendment) Seat material MouldedPlywood Seat material thickness 12 mm Density of Polyurethane foam usedin seat (2 Kg/Cub Meter) 32 Seat upholstered with Leatherette GSM of seat cover ( 3 GSM) 80 GSM Product Compare Product History 4 Backrest material MouldedPlywood Density of Polyurethane foam usedin Backrest ( 2 Kg/Cub Meter) 32 Backrest upholstered with Leatherette Seat Depth ( 5 mm) 390 mm Seat Width ( 5 mm) 440 mm Seat height from fl oor surface (5mm) 435 mm Backrest width ( 5 mm) 350 mm Backrest height from seat (5 mm) 340 mm Paint Type ChromePaint Polish Type N.A Colour of Paint Black Availability of Test Report fromCentral Govt/NABL/ILAC accreditedlab to prove the conformity ofproduct to the Specifi cation No Test reports to be furnished tobuyer on demand N.A GENERAL REQUIREMENT Chair Type Non-Revolving and Non-Tilting chair with Armrest Chair frame type Legs Armrest type Continuous armrest Armrest front side Curved Seat type Moulded Backrest type Moulded Shoe/Studs material PVC FABRICATION Seat Fitted Over fl at size in depth-wise of the frame on bothsides with minimum 3 screws Backrest Fitted By round head screws 3 Nos. (minimum) on eachside Armrest Fitted With round steel screws 3 Nos. (minimum) on eachside CHAIR FRAME Frame Material Confi guration One piece Frame material Steel tube (ERW quality) conforming to IS: 1161 (withlatest Amendment) The shape of tubular section of frame Square Section Size (Diameter/Sides) of frame 25 mm Frame section wall thickness 1.2 mm ARMREST FABRICATION The armrest material Cushion pad fi xed on frame material Armrest Padded with Foam Armrest upholstered with N.A Armrest material thickness 1 mm SEAT FABRICATION Seat material Moulded Plywood Seat material thickness 12 mm Seat padded Yes Density of Polyurethane foam used in seat (2 Kg/CubMeter) 32 Seat upholstered with Leatherette GSM of seat cover ( 3 GSM) 80 GSM Polyurethane foam thickness (for seat) 15 mm Color of Seat cover Black BACKREST FABRICATION Backrest material Moulded Plywood Backrest Material thickness 1 mm Backrest padded Yes Density of Polyurethane foam used in Backrest ( 2Kg/Cub Meter) 32 Backrest upholstered with Leatherette GSM of Backrest cover ( 3 GSM) 220 GSM Polyurethane foam thickness (for backrest) 15 mm Colour of Backrest cover Black DIMENSION Seat Depth (5 mm) 390 mm Seat Width ( 5 mm) 440 mm Seat height from fl oor surface ( 5 mm) 435 mm Backrest width ( 5 mm) 350 mm Backrest height from seat ( 5 mm) 340 mm Arm Length ( 5 mm) 200 mm Arm Width (2 mm) 25 mm COLOUR AND FINISH Paint Type Chrome Paint Polish Type N.A Colour of Paint Black Visiter and meeting hall Nos 5500.0 5500.0 135.0 False None None False None False 742500.0 0 3096256 106458 None code330 Providing and supplyin 3 Seater Public PlaceSeating Chair of M S ERW tube witharm and backrest WITHOUTCUSHION Specifi cations Style with arm andbackrest Seating Capacity (Nos) 3 Material of Main Frame M S ERW tube Material of Seat and Backrest MSRECTANGULARSECTION PIPE Material of Arms MSRECTANGULARSECTION PIPE Material of Legs MSRECTANGULARSECTION PIPE Material of Side Bar Bracket solid steel v-shapedpowdercoated Overall Length in mm (10 mm) 1800 Overall Depth in mm ( 5 mm) 450 Overall Height in mm (5 mm) 600 All steel component to be epoxypowder coated 50 micronthick GENERIC Type of Seating Integrated Seat and Backrest Style with arm and backrest Seating Capacity (Nos) 3 Number of arms (Nos) 2 Delivery status Assembled Seat Cushion WITHOUT CUSHION Backrest Cushion WITHOUT CUSHION MATERIAL Material of Main Frame M S ERW tube Material of Seat and Backrest MS RECTANGULAR SECTION PIPE Material of Arms MS RECTANGULAR SECTION PIPE Material of Legs MS RECTANGULAR SECTION PIPE Material of Side Bar Bracket solid steel v-shaped powder coated Thickness of material of Main Frame in mm 1.2 Thickness of material of Arms in mm 1.2 Type of bolts M8 bolts Thickness of PU Foam for Seat and Backrest 2(mm) N.A Density of PU Foam for Seat and Backrest 2(Kg/CubicMetre) N.A Covering Material for Seat and Backrest NA DIMENSION Overall Length in mm (10 mm) 1800 Overall Depth in mm ( 5 mm) 450 Overall Height in mm (5 mm) 600 Seat Height from Floor in mm (5 mm) 425 mm Thickness of material of Seat and Backrest (mm) 1.2 mm Nos 15000.0 15000.0 3.0 False None None False None False 45000.0 0 3096257 106458 None code331 Non-Revolving and Non-Tilting chair with Armrest Specifi cations Chair Type Non-Revolvingand Non-Tilting chairwith Armrest Chair frame type Legs Armrest type Mouldedarmrestcontinuouslyfi tted withseat bottomto backrest Seat type Padded Backrest type Padded Frame Material Confi guration One piece Frame material Steel tube(ERW quality) conformingto IS: 1161(with latestAmendment 5378-1994(with latestamendment)with woodenframe Seat material thickness 12 mm Density of Polyurethane foam usedin seat (2 Kg/Cub Meter) 35 Seat upholstered with Fabric GSM of seat cover ( 3 GSM) 220 GSM Backrest material PolythenecaneConfmg. to IS5378-1994(with latestamendment)with woodenframe Density of Polyurethane foam usedin Backrest ( 2 Kg/Cub Meter) 35 Backrest upholstered with Fabric Seat Depth (5 mm) 450 mm Seat Width ( 5 mm) 460 mm Seat height from fl oor surface ( 5mm) 435 mm Backrest width (5 mm) 450 mm Backrest height from seat ( 5 mm) 460 mm Paint Type Anti-CorrosivePaint Polish Type TransparentglossyFrench Polish Colour of Paint Black to prove the conformity ofproduct to the Specifi cation Test reports to be furnished tobuyer on demand N.A GENERAL REQUIREMENT Chair Type Non-Revolving and Non-Tilting chair with Armrest Chair frame type Legs Armrest type Moulded armrest continuously fi tted with seatbottom to backrest Armrest front side Curved Seat type Padded Backrest type Padded Shoe/Studs material Polypropylene FABRICATION Seat Fitted Over fl at size in depth-wise of the frame on bothsides with minimum 3 screws Backrest Fitted By round head screws 3 Nos. (minimum) on eachside Armrest Fitted With round steel screws 3 Nos. (minimum) on eachside CHAIR FRAME Frame Material Confi guration One piece Frame material Steel tube (ERW quality) conforming to IS: 1161 (withlatest Amendment) The shape of tubular section of frame Round Section Size (Diameter/Sides) of frame 25 mm Frame section wall thickness 1.2 mm ARMREST FABRICATION The armrest material Injection moulded Polypropylene Armrest Padded with N.A Armrest upholstered with N.A Armrest material thickness 30 mm Nos 4000.0 4000.0 30.0 False None None False None False 120000.0 0 3096258 106458 None code332 Almirah Steel shelving cabinets Specifi cations Technical specifi cation of Almirahsteel Generally conforming to BISspecifi cation IS: 3312:2021 (with latestamendment) Type of Almirah steel Almirah Steel shelving cabinets Number of door 2 Number of drawers required No Drawer Number of shelves 4 Colour of fi nish Off white Steel sheet material CRCA sheets conforming to grade CRI ofIS 513(part-1):2016 (with latestamendment) Sheet rounds and fl ats N.A Almirah height(excluding theheight of pedestal) 5 mm 1830 mm Almirah width 5 mm 900 mm Almirah depth 5 mm 505 mm Side sheet thickness 0.8 mm Back sheet thickness 0.8 mm Top sheet thickness 0.8 mm Bottom sheet thickness 0.8 mm Shelves sheet thickness 0.8 mm Shelves supporting bracket thickness 1.6 mm Hinges sheet thickness 1.25 mm(double folded) Hanging rod wall thickness N.A Mirror frame sheet thickness N.A Mirror frame border width N.A Width of stiff ener 115 mm Stiff ener sheet thickness 0.6 mm Number of glass sheet fi xed N.A Handle size 12 cm Steel Almirah lock/locker lock Six lever lock Material of lock Brass and Steel fi nish Finish coat with enamels N.A Powder coating With 50 micron thickness minimum GENERAL REQUIREMENT Technical specifi cation of Almirah steel Generally conforming to BIS specifi cation IS: 3312:2021 (with latestamendment) Type of Almirah steel Almirah Steel shelving cabinets Construction type Riveted Installation Free standing Pedestal Yes Pedestal fi tted with 3 mm Tefl on Bush Pedestal height ( 5 mm) 125 mm Locker required No Door type Hinged Number of door 2 Number of hinges (for each door) 3 Door stiff ener up to full door height provided Yes Mirror fi tted No mirror Number of drawers required No Drawer Shelves required Adjustable Number of shelves 4 Uniformly distributed load (UDL) for shelves 60 Kgs. Wardrobe by style No wardrobe Tie Hanger No Colour of fi nish Off white MATERIAL Steel sheet material CRCA sheets conforming to grade CRI of IS 513(part-1):2016 (with latestamendment) Sheet rounds and fl ats N.A Screws Conforming to IS 1365 Hanging rod material Round ERW tube conforming to IS 7138 Mirror frame made out of (if provided) No mirror frame Tie hanger made out of N.A Stiff ener material MS sheet DIMENSION Almirah height(excluding the height of pedestal) 5 mm 1830 mm Almirah width 5 mm 900 mm Almirah depth 5 mm 505 mm Locker inside height 5 mm No locker Locker inside width 5 mm N.A Locker inside depth 5 mm N.A Drawer height N.A Drawer width N.A Drawer depth N.A Mirror sizes N.A Shelves lipped fl ange 35 mm Side sheet thickness 0.8 mm Back sheet thickness 0.8 mm Top sheet thickness 0.8 mm Bottom sheet thickness 0.8 mm Shelves sheet thickness 0.8 mm Shelves supporting bracket thickness 1.6 mm Door metal stiff ener thickness 0.8 mm Pedestal sheet thickness 0.8 mm Hinges sheet thickness 1.25 mm(double folded) locker door sheet thickness N.A Drawer sheet thickness N.A Hanging rod wall thickness N.A Hanging rod diameter 2 mm N.A Mirror frame sheet thickness N.A Mirror frame border width N.A Tie hanger sheet thickness N.A Width of stiff ener 115 mm Stiff ener sheet thickness 0.6 mm Number of glass sheet fi xed N.A Handle size 12 cm LOCKS AND LOCKING ARRANGEMENT Steel Almirah lock/locker lock Six lever lock Material of lock Brass and Steel fi nish Duplicate keys (for each) Yes Keys material (for each lock) Steel Steel Almirah locking mechanism A three way bolting device controlled by a lock Door handle material for almirah lock Zinc based alloy Handle material for locker N.A Lockers locking mechanism Two way bolting system controlled by the lock Drawer lock N.A FINISH All the mild steel parts shall be given phosphating treatment Conforming to Class c of IS 3618 The process of application of phosphate coating Accordance with IS 6005 Finish coat with enamels N.A Powder coating With 50 micron thickness minimum Nos 21170.0 21170.0 55.0 False None None False None False 1164350.0 0 3096259 106458 None code333 915 mm wide1875 mm high Metal Shelving Racks Specifi cations Type OPEN TYPE Number of Shelves/ Compartments (Top / Ceiling Shelf - not to becounted) 6 Shelves Material 0.9 mm ThickMS Sheet Conformingto Commercia lQuality CR-1,Grade 340 ofIS 513 Depth in mm (5 mm) 450 Width in mm (5 mm) 915 Height in mm (5 mm) 1875 Paint Powder coated GENERIC Type OPEN TYPE Pigeon Holes without Number of Shelves/ Compartments (Top / Ceiling Shelf -not to be counted) 6 MATERIAL Shelves Material 0.9 mm Thick MS Sheet Conforming to CommercialQuality CR-1, Grade 340 of IS 513 M S Sheet Thickness of Shelves and Back (Minimum) inmm 1.0 Sides, Back and Partition Wall Thickness (Minimum)(mm) NA Angle Posts Material and size Rolled steel angle posts of 40 X 40 X 3 mm DIMENSION Depth in mm (5 mm) 450 Width in mm (5 mm) 915 Height in mm (5 mm) 1875 Bin Strip Height in mm (1 mm) Not Provided CERTIFICATION Conformity to Indian Standard IS: 1883 Latest MISC Number of Pigeon Holes Equally Spaced in Each Row na Paint Powder coated Colour dove gray Packing Bubble Sheet Packing No of Gussets 8 Ground Clearance in mm (+/- 2 mm) 55 mm Label Holder No Nos 8000.0 8000.0 45.0 False None None False None False 360000.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1710505028000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1710505028000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1710505028000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1710505118000 0 None None ELIGIBILITY As per IFT None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None List of existing commitments and ongoing works None None None None None None List of works for which tenders already submitted None None None None None None Banker Details for reference None None None None None None Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded None None None None None None Should have successfully completed at least one Similar nature of work Costing not less than the 80% of amount of work put to tender, from 01/04/2018 onwards for any of the Govt. / Public Sector/ Corporate undertakings. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Executed in any one of the year of Minimum Quantities of Work (refer IFT for quantities) Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None The tenderer or his identified sub-contractor should possess valid electrical license for executing building electrification works and should have executed similar electrical works (totaling not less than 50% of electrical works put to tender) in any one year. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None refer IFT Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Total value of civl engineering works executed and payments received in the last five years (year-wise) refer IFT Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Tenderer should further demonstrate availability required/specified key and critical equipments (50% own and remaining 50% on lease/hire basis) (refer IFT for all the equipments and machineries required) Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- machineries and equipments details None None None None Should be a valid appropriate class of registration in Karnataka CPWD/MES/KPWD class-I as mentioned against each work. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None PWD Registration Certificate (Class I/II/III/IV) None None None None Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. 2000 Lakhs) Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Liquid asset and / or availability of credit facilities of not less than 30% amount put to tender (Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc) Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit None None None None Submit EPF Registration certificate along with paid challans of last 3months from date of notification Financial Status None createdTs version createdDate modifiedDate documentName None None None None Valid EPF Certificate None None None None Submit ESI Registration certificate along with paid challans of last 3months from date of notification Financial Status None createdTs version createdDate modifiedDate documentName None None None None Valid ESI certificate None None None None GST Details for the current financial year Financial Status None createdTs version createdDate modifiedDate documentName None None None None GST Registration
tenderCriterionDocumentList	documentName optional documentTypeText Registration Certificate for the block period 2019-2024.Should be a valid appropriate class of registration in Karnataka CPWD/MES/KPWD class-1 True Technical Bid work done certificate as per IFT requirement True Technical Bid Quantity wise work done certificate as per IFT True Technical Bid Availability of Equipments and Machineries True Technical Bid Annual turnover certificate True Technical Bid GST registration certificate True Technical Bid ESI registration certificate True Technical Bid EPF registration certificate True Technical Bid line of credit True Technical Bid PAN Number True Technical Bid E-proc formats shall be uploaded True Technical Bid
tenderWorkLocationList	tenderSubEstimateName districtName taluqName loksabhaContName assemblyContName locationDescription latitudeDegrees latitudeMinutes latitudeSeconds longitudeDegrees longitudeMinutes longitudeSeconds Buildings Bidar Bidar Bidar BIDAR GESCOM Division office premises at Bidar None None None None None None
tenderAddress	createdTs 1710512657000 version 0 createdDate None modifiedDate None blockNumber GESCOM CORPORATE OFFICE KALABURAGI street None city KALABURAGI state Karnataka pin 585102
tenderRecallDTO	None