| 3092879 | 106329 | None | 2.5A | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness.By Mechanical Means using Dozer.A In area of light jungle. ---- etc., complete with all lead | 100 Sqm | 463.74 | 463.74 | 1.44 | False | None | None | False | None | False | 667.7856 | 0 |
| 3092880 | 106329 | None | 1.12 | Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth ---- etc., complete with all lead | Cum | 112.1 | 112.1 | 102.0 | False | None | None | False | None | False | 11434.2 | 0 |
| 3092881 | 106329 | None | 1.14.1 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m ---- etc., complete with all lead | Cum | 120.36 | 120.36 | 73.06 | False | None | None | False | None | False | 8793.5016 | 0 |
| 3092882 | 106329 | None | 1.8 | Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all
materials,usage& all other appurtenaces required to complete the work. ---- etc., complete with all lead | Sqm | 559.32 | 559.32 | 39.7 | False | None | None | False | None | False | 22205.004 | 0 |
| 3092883 | 106329 | None | 1.1a | Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kankar/Moorum. (Tipper 5.5 m3) ---- etc., complete with all lead | Cum | 159.3 | 159.3 | 39.7 | False | None | None | False | None | False | 6324.21 | 0 |
| 3092884 | 106329 | None | 2.1.3 | Providing and laying in position Cement Concrete for leveling course for all works in foundation. The granite, trap, basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes ma chine mixed, laid in layers not exceeding 150 mm thickness, well com pacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 using 40mm nominal size graded crused coarse aggregates ---- etc., complete with all lead | Cum | 7067.02 | 7067.02 | 50.22 | False | None | None | False | None | False | 354905.7444 | 0 |
| 3092885 | 106329 | None | 5.4 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) ---- etc., complete with all lead | Cum | 7539.02 | 7539.02 | 61.34 | False | None | None | False | None | False | 462443.4868 | 0 |
| 3092886 | 106329 | None | 2.1.4 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes ma chine mixed, laid in layers not exceeding 150 mm thickness, well com pacted using plate vibrators, including all lead & lifts, cost of all materi als of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. - Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggre gates ---- etc., complete with all lead | Cum | 7336.06 | 7336.06 | 2.98 | False | None | None | False | None | False | 21861.4588 | 0 |
| 3092887 | 106329 | None | 2.5.2 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M25 Design Mix Using 20 mm nominal size graded crushed coarse
aggregates ---- etc., complete with all lead | Cum | 12112.11 | 12112.11 | 7.87 | False | None | None | False | None | False | 95322.3057 | 0 |
| 3092888 | 106329 | None | 2.5.2 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates with Lintels shuttering ---- etc., complete with all lead | Cum | 12919.58 | 12919.58 | 2.94 | False | None | None | False | None | False | 37983.5652 | 0 |
| 3092889 | 106329 | None | 2.5.2 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates with Chejja shuttering ---- etc., complete with all lead | Cum | 11708.37 | 11708.37 | 0.67 | False | None | None | False | None | False | 7844.6079 | 0 |
| 3092890 | 106329 | None | 2.5.2 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates with Roof Beam Shuttering ---- etc., complete with all lead | Cum | 12919.58 | 12919.58 | 10.35 | False | None | None | False | None | False | 133717.653 | 0 |
| 3092891 | 106329 | None | 2.5.2 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. - M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates with Roof Slab shuttering ---- etc., complete with all lead | Cum | 12112.11 | 12112.11 | 14.65 | False | None | None | False | None | False | 177442.4115 | 0 |
| 3092892 | 106329 | None | 2.11 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement
including cost of all materials, machinery, labour, cleaning, straightening,
cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. ---- etc., complete with all lead | Tonne | 105559.26 | 105559.26 | 4.45 | False | None | None | False | None | False | 469738.707 | 0 |
| 3092893 | 106329 | None | 6.5 | Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cement mortar 1:6 (1 cement : 6 coarse sand) With Non modular bricks including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. ---- etc., complete with all lead | Cum | 12952.86 | 12952.86 | 71.18 | False | None | None | False | None | False | 921984.5748 | 0 |
| 3092894 | 106329 | None | 6.13 | Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. ---- etc., complete with all lead | Sqm | 1151.68 | 1151.68 | 49.53 | False | None | None | False | None | False | 57042.7104 | 0 |
| 3092895 | 106329 | None | 8.10 | Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead | Sqm | 248.98 | 248.98 | 89.13 | False | None | None | False | None | False | 22191.5874 | 0 |
| 3092896 | 106329 | None | 8.5.2 | Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead | Sqm | 411.82 | 411.82 | 215.02 | False | None | None | False | None | False | 88549.5364 | 0 |
| 3092897 | 106329 | None | 8.9 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead | Sqm | 454.3 | 454.3 | 197.04 | False | None | None | False | None | False | 89515.272 | 0 |
| 3092898 | 106329 | None | 8.16.2 | Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment - Plaster mesh 150mm wide ---- etc., complete with all lead | m | 44.84 | 44.84 | 150.0 | False | None | None | False | None | False | 6726.0 | 0 |
| 3092899 | 106329 | None | 12.13.1 | Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. ---- etc., complete with all lead | Cum | 116601.7 | 116601.7 | 0.3 | False | None | None | False | None | False | 34980.51 | 0 |
| 3092900 | 106329 | None | 12.51 | Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications ---- etc., complete with all lead | Nos | 1198.88 | 1198.88 | 5.0 | False | None | None | False | None | False | 5994.4 | 0 |
| 3092901 | 106329 | None | 11.34A | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding ---- etc., complete with all lead | Kg | 198.24 | 198.24 | 181.44 | False | None | None | False | None | False | 35968.6656 | 0 |
| 3092902 | 106329 | None | 9.12.2 | Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. - Size of Tile 600x600 mm ---- etc., complete with all lead | Sqm | 1351.1 | 1351.1 | 1182.12 | False | None | None | False | None | False | 1597162.332 | 0 |
| 3092903 | 106329 | None | 9.11 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. ---- etc., complete with all lead | Sqm | 1049.02 | 1049.02 | 81.35 | False | None | None | False | None | False | 85337.777 | 0 |
| 3092904 | 106329 | None | 8.2.1 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead | Sqm | 348.1 | 348.1 | 1129.28 | False | None | None | False | None | False | 393102.368 | 0 |
| 3092905 | 106329 | None | 9.39 | Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. ---- etc., complete with all lead | Sqm | 1709.82 | 1709.82 | 581.48 | False | None | None | False | None | False | 994226.1336 | 0 |
| 3092906 | 106329 | None | 8.51 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- etc., complete with all lead | Sqm | 118.0 | 118.0 | 5959.92 | False | None | None | False | None | False | 703270.56 | 0 |
| 3092907 | 106329 | None | 8.39 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead | Sqm | 149.86 | 149.86 | 5959.92 | False | None | None | False | None | False | 893153.6112 | 0 |
| 3092908 | 106329 | None | 8.32 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 L/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead | Sqm | 184.08 | 184.08 | 663.51 | False | None | None | False | None | False | 122138.9208 | 0 |
| 3092909 | 106329 | None | 12.96 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame ---- etc., complete with all lead | m | 758.74 | 758.74 | 6.0 | False | None | None | False | None | False | 4552.44 | 0 |
| 3092910 | 106329 | None | 12.57.6 | Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification - 35 mm thick both side commercial ---- etc., complete with all lead | Sqm | 3919.96 | 3919.96 | 47.22 | False | None | None | False | None | False | 185100.5112 | 0 |
| 3092911 | 106329 | None | 12.97.1 | Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. - 30 mm thickness ---- etc., complete with all lead | Sqm | 3780.72 | 3780.72 | 13.19 | False | None | None | False | None | False | 49867.6968 | 0 |
| 3092912 | 106329 | None | 12.89 | Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 94mm width x 45mm height with reinforcement of 1mm thickness and Sash with overall size of 39mm x 58mm with GI reinforcement of 1.5mm and mesh sash of size 25mm x 42mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size ---- etc., complete with all lead | Sqm | 7730.18 | 7730.18 | 37.35 | False | None | None | False | None | False | 288722.223 | 0 |
| 3092913 | 106329 | None | 12.85 | Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size ---- etc., complete with all lead | Sqm | 6748.42 | 6748.42 | 3.38 | False | None | None | False | None | False | 22809.6596 | 0 |
| 3092914 | 106329 | None | 8.34.3 | Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer in charge ---- etc., complete with all lead | Sqm | 59.0 | 59.0 | 10.13 | False | None | None | False | None | False | 597.67 | 0 |
| 3092915 | 106329 | None | 8.34.1 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer in charge. ---- etc., complete with all lead | Sqm | 62.54 | 62.54 | 36.29 | False | None | None | False | None | False | 2269.5766 | 0 |
| 3092916 | 106329 | None | 8.40 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead | Sqm | 135.7 | 135.7 | 399.27 | False | None | None | False | None | False | 54180.939 | 0 |
| 3092917 | 106329 | None | 8.33.2 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour
complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead | Sqm | 162.84 | 162.84 | 36.29 | False | None | None | False | None | False | 5909.4636 | 0 |
| 3092918 | 106329 | None | 4.1 | Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications.- etc., complete with all lead & lift and work to be executed as per the specification and Engineer-in-charge of the work. ---- etc., complete with all lead | Sqm | 139.24 | 139.24 | 132.15 | False | None | None | False | None | False | 18400.566 | 0 |
| 3092919 | 106329 | None | 4.21 | KSRB 4-2.12 : Extra for providing throating or drip moulding to RCC chejjas with plastering ( labour charges only ) as per specifications. Specification No . KBS - etc., complete with all lead & lift and work to be executed as per the specification and Engineer-in-charge of the work. ---- etc., complete with all lead | Rmtr | 38.94 | 38.94 | 24.0 | False | None | None | False | None | False | 934.56 | 0 |
| 3092920 | 106329 | None | 8.16a | Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup boards including cost of all materials, labour, providing and removing form work usage charges, curing, complete as per specifications. ---- etc., complete with all lead | Sqm | 1460.84 | 1460.84 | 1.92 | False | None | None | False | None | False | 2804.8128 | 0 |
| 3092921 | 106329 | None | Approved Rate | Providing throating elevation Patti on uniform size 10 cm wide and 12 mm thick for portico, chejjas & parapet wall elevation etc, including cost of materials , labour floor fixing, HOM of equipments and machineries all leads and lift loading and unloading, transportation , all other incidental charges at all floor levels etc, complete all as per specifications and as directed by the Engineer in charge. ---- etc., complete with all lead | Rmtr | 86.14 | 86.14 | 38.0 | False | None | None | False | None | False | 3273.32 | 0 |
| 3092922 | 106329 | None | 12.63 | Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. ---- etc., complete with all lead | No | 153.4 | 153.4 | 12.0 | False | None | None | False | None | False | 1840.8 | 0 |
| 3092923 | 106329 | None | 12.62 | Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete. ---- etc., complete with all lead | No | 279.66 | 279.66 | 12.0 | False | None | None | False | None | False | 3355.92 | 0 |
| 3092924 | 106329 | None | 12.64 | Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms. ---- etc., complete with all lead | No | 64.9 | 64.9 | 6.0 | False | None | None | False | None | False | 389.4 | 0 |
| 3092925 | 106329 | None | 12.58 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. ---- etc., complete with all lead | No | 141.6 | 141.6 | 6.0 | False | None | None | False | None | False | 849.6 | 0 |
| 3092926 | 106329 | None | 15.1 | Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. ---- etc., complete with all lead | Sqm | 964.06 | 964.06 | 93.54 | False | None | None | False | None | False | 90178.1724 | 0 |
| 3092927 | 106329 | None | 2.9III(B) | Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead - Dismantling Brick / Tile work - In cement mortar ---- etc., complete with all lead | Cum | 719.8 | 719.8 | 185.79 | False | None | None | False | None | False | 133731.642 | 0 |
| 3092928 | 106329 | None | 9.23 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rub bing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :** Flamed finish granite stone slab Black, Cat Eye, River Pink or equivalent. ---- etc., complete with all lead | Sqm | 2909.88 | 2909.88 | 180.33 | False | None | None | False | None | False | 524738.6604 | 0 |
| 3092929 | 106329 | None | 13.32.2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. - 20 mm nominal dia pipes ---- etc., complete with all lead | m | 447.22 | 447.22 | 150.0 | False | None | None | False | None | False | 67083.0 | 0 |
| 3092930 | 106329 | None | 13.33.3 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work - 25 mm nominal dia Pipes ---- etc., complete with all lead | m | 349.28 | 349.28 | 200.0 | False | None | None | False | None | False | 69856.0 | 0 |
| 3092931 | 106329 | None | 13.5.3 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : - 25 mm nominal bore ---- etc., complete with all lead | Nos | 391.76 | 391.76 | 1.0 | False | None | None | False | None | False | 391.76 | 0 |
| 3092932 | 106329 | None | 13.4.1 | Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : - 25 mm nominal bore ---- etc., complete with all lead | Nos | 647.82 | 647.82 | 4.0 | False | None | None | False | None | False | 2591.28 | 0 |
| 3092933 | 106329 | None | 677 | PVC pipes of 6 Kg/cm2 for 110mm(1.894) including cost of materials, labour, complete as per specifications. ---- etc., complete with all lead | m | 247.8 | 247.8 | 24.0 | False | None | None | False | None | False | 5947.2 | 0 |
| 3092934 | 106329 | None | 678 | PVC pipes of 6 Kg/cm2 for 160mm(3.923) including cost of materials, labour, complete as per specifications. ---- etc., complete with all lead | m | 523.92 | 523.92 | 170.0 | False | None | None | False | None | False | 89066.4 | 0 |
| 3092935 | 106329 | None | 674 BWSSB | PVC pipes of 6 Kg/cm2 for 75mm(0.917) including cost of materials, labour, complete as per specifications. ---- etc., complete with all lead | m | 116.82 | 116.82 | 80.0 | False | None | None | False | None | False | 9345.6 | 0 |
| 3092936 | 106329 | None | 14.7.2 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: - White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap ---- etc., complete with all lead | Each | 3021.98 | 3021.98 | 14.0 | False | None | None | False | None | False | 42307.72 | 0 |
| 3092937 | 106329 | None | 14.40.2 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrange ment of approved quality and colour - 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g ---- etc., complete with all lead | Each | 585.28 | 585.28 | 4.0 | False | None | None | False | None | False | 2341.12 | 0 |
| 3092938 | 106329 | None | 14.31 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. ---- etc., complete with all lead | Each | 1439.6 | 1439.6 | 24.0 | False | None | None | False | None | False | 34550.4 | 0 |
| 3092939 | 106329 | None | 13.3.1 | Providing and fixing brass stop cock of approved quality :15 mm nominal bore ---- etc., complete with all lead | Nos | 352.82 | 352.82 | 24.0 | False | None | None | False | None | False | 8467.68 | 0 |
| 3092940 | 106329 | None | 13.2.1 | Providing and fixing brass bib cock of approved quality : 15 mm nominal bore ---- etc., complete with all lead | Nos | 337.48 | 337.48 | 5.0 | False | None | None | False | None | False | 1687.4 | 0 |
| 3092941 | 106329 | None | Approved rate | Supplying, fixing, testing and commissioning of CP health faucet Hand operated spray unit (instant type) CP Crutch etc., complete as directed by the Engineer in charge. ALD-577. ( Jaguar make or Equalent ). ---- etc., complete with all lead | Each | 2183.0 | 2183.0 | 2.0 | False | None | None | False | None | False | 4366.0 | 0 |
| 3092942 | 106329 | None | 14.1.1 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: - White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests ---- etc., complete with all lead | Nos | 5763.12 | 5763.12 | 1.0 | False | None | None | False | None | False | 5763.12 | 0 |
| 3092943 | 106329 | None | 13.22.1.1 | Providing and fixing PTMT grating of approved quality and colour Circular type 100 mm nominal dia ---- etc., complete with all lead | Nos | 48.38 | 48.38 | 8.0 | False | None | None | False | None | False | 387.04 | 0 |
| 3092944 | 106329 | None | 13.59 | Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete. -do- 10cms x 7.5cms ---- etc., complete with all lead | Nos | 259.6 | 259.6 | 28.0 | False | None | None | False | None | False | 7268.8 | 0 |
| 3092945 | 106329 | None | 14.28.2.2 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines - etc., complete with all lead & lift and work to be executed as per the specification and Engineer-in-charge of the work. ---- etc., complete with all lead | Each | 108.56 | 108.56 | 44.0 | False | None | None | False | None | False | 4776.64 | 0 |
| 3092946 | 106329 | None | 13.34 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (For 2000 litre capacity) ---- etc., complete with all lead | l | 10.62 | 10.62 | 1000.0 | False | None | None | False | None | False | 10620.0 | 0 |
| 3092947 | 106329 | None | 14.8 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. ---- etc., complete with all lead | Each | 1679.14 | 1679.14 | 4.0 | False | None | None | False | None | False | 6716.56 | 0 |
| 3092948 | 106329 | None | 16.9 | Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame & cover ---- etc., complete with all lead | Each | 6435.72 | 6435.72 | 9.0 | False | None | None | False | None | False | 57921.48 | 0 |
| 3092949 | 106329 | None | 13.52 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With common burnt clay (non modular) bricks of class designation 3.5 ---- etc., complete with all lead | M / Cm | 12467.88 | 12467.88 | 1.0 | False | None | None | False | None | False | 12467.88 | 0 |
| 3092950 | 106329 | None | Approved Rate | Supplying, fixing, testing and commissioning of CP health faucet Hand operated spray unit (instant type) CP Crutch etc., complete as directed by the Engineer in charge. ALD-577. ( Jaguar make or Equalent ).- etc., complete with all lead & lift and work to be executed as per the specification and Engineer-in-charge of the work. ---- etc., complete with all lead | Each | 2183.0 | 2183.0 | 5.0 | False | None | None | False | None | False | 10915.0 | 0 |
| 3092951 | 106329 | None | 14.3.1 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required - W.C. pan with ISI marked white solid plastic seat and lid ---- etc., complete with all lead | Each | 7052.86 | 7052.86 | 8.0 | False | None | None | False | None | False | 56422.88 | 0 |
| 3092952 | 106329 | None | 2.2.1 | Internal Electrical Works:Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point up to 3Mtr from tapping point to out let via switch. for TLH Repairs ---- etc., complete with all lead | Point | 317.42 | 317.42 | 30.0 | False | None | None | False | None | False | 9522.6 | 0 |
| 3092953 | 106329 | None | 2.2.2 | Internal Electrical Works:Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch for TLH Repairs ---- etc., complete with all lead | Point | 447.22 | 447.22 | 25.0 | False | None | None | False | None | False | 11180.5 | 0 |
| 3092954 | 106329 | None | 2.2.3 | Internal Electrical Works:Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.Long point above 6Mtr up to 10Mtr from tapping point to out let via switch for TLH Repairs ---- etc., complete with all lead | Point | 654.9 | 654.9 | 10.0 | False | None | None | False | None | False | 6549.0 | 0 |
| 3092955 | 106329 | None | 3.4.2 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1-3Way for TLH Repair ---- etc., complete with all lead | Each | 187.62 | 187.62 | 40.0 | False | None | None | False | None | False | 7504.8 | 0 |
| 3092956 | 106329 | None | 3.4.3 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 4-5Way for TLH Repairs ---- etc., complete with all lead | Each | 208.86 | 208.86 | 30.0 | False | None | None | False | None | False | 6265.8 | 0 |
| 3092957 | 106329 | None | 3.4.4 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 6Way for TLH Repairs ---- etc., complete with all lead | Each | 259.6 | 259.6 | 25.0 | False | None | None | False | None | False | 6490.0 | 0 |
| 3092958 | 106329 | None | 3.4.5 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 8 way For TLH Repairs ---- etc., complete with all lead | Each | 307.98 | 307.98 | 15.0 | False | None | None | False | None | False | 4619.7 | 0 |
| 3092959 | 106329 | None | 3.4.6 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall.10-12Way for TLH Repairs ---- etc., complete with all lead | Each | 376.42 | 376.42 | 10.0 | False | None | None | False | None | False | 3764.2 | 0 |
| 3092960 | 106329 | None | 3.5.2 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 to 3 Module for TLH Repairs ---- etc., complete with all lead | Each | 189.98 | 189.98 | 40.0 | False | None | None | False | None | False | 7599.2 | 0 |
| 3092961 | 106329 | None | 3.5.3 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.4 Module For TLH Repairs ---- etc., complete with all lead | Each | 206.5 | 206.5 | 30.0 | False | None | None | False | None | False | 6195.0 | 0 |
| 3092962 | 106329 | None | 3.5.4 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 6 Module For TLH Repairs ---- etc., complete with all lead | Each | 276.12 | 276.12 | 25.0 | False | None | None | False | None | False | 6903.0 | 0 |
| 3092963 | 106329 | None | 3.5.5 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 8 Module For TLH Repairs ---- etc., complete with all lead | Each | 335.12 | 335.12 | 15.0 | False | None | None | False | None | False | 5026.8 | 0 |
| 3092964 | 106329 | None | 3.5.6 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 10-12 Module for TLH Repairs ---- etc., complete with all lead | Each | 405.92 | 405.92 | 10.0 | False | None | None | False | None | False | 4059.2 | 0 |
| 3092965 | 106329 | None | 3.6.1 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch for TLH Repairs ---- etc., complete with all lead | Each | 120.36 | 120.36 | 240.0 | False | None | None | False | None | False | 28886.4 | 0 |
| 3092966 | 106329 | None | 3.6.2 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch ---- etc., complete with all lead | Each | 195.88 | 195.88 | 10.0 | False | None | None | False | None | False | 1958.8 | 0 |
| 3092967 | 106329 | None | 3.6.4 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator. For TLH Repairs ---- etc., complete with all lead | Each | 421.26 | 421.26 | 25.0 | False | None | None | False | None | False | 10531.5 | 0 |
| 3092968 | 106329 | None | 3.6.7 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16Amps one way switch for TLH Repairs ---- etc., complete with all lead | Each | 212.4 | 212.4 | 25.0 | False | None | None | False | None | False | 5310.0 | 0 |
| 3092969 | 106329 | None | 3.6.9 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch for TLH Repairs ---- etc., complete with all lead | Each | 384.68 | 384.68 | 25.0 | False | None | None | False | None | False | 9617.0 | 0 |
| 3092970 | 106329 | None | 3.6.10 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket for TLH repairs ---- etc., complete with all lead | Each | 278.48 | 278.48 | 20.0 | False | None | None | False | None | False | 5569.6 | 0 |
| 3092971 | 106329 | None | 1.12 | Supplyin and Fixing Metal Fan Box with Round Hook. for TLH Reairs ---- etc., complete with all lead | No | 188.8 | 188.8 | 25.0 | False | None | None | False | None | False | 4720.0 | 0 |
| 3092972 | 106329 | None | 1.2.1 | Supplying heavy gauge PVC conduit pipe ……mm dia .mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary. 19/20mm dia 2mm thick ---- etc., complete with all lead | Mtr | 77.88 | 77.88 | 50.0 | False | None | None | False | None | False | 3894.0 | 0 |
| 3092973 | 106329 | None | 1.2.2 | Supplying heavy gauge PVC conduit pipe ……mm dia .mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary. 25mm dia 2mm thick ---- etc., complete with all lead | Mtr | 92.04 | 92.04 | 150.0 | False | None | None | False | None | False | 13806.0 | 0 |
| 3092974 | 106329 | None | 1.3.1 | Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 19/20mm dia 2mm thick. For TLH Repairs ---- etc., complete with all lead | Mtr | 80.24 | 80.24 | 180.0 | False | None | None | False | None | False | 14443.2 | 0 |
| 3092975 | 106329 | None | 1.3.2 | Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary.25mm dia 2mm thick. for TLH Repairs ---- etc., complete with all lead | Mtr | 93.22 | 93.22 | 250.0 | False | None | None | False | None | False | 23305.0 | 0 |
| 3092976 | 106329 | None | 2.3.2 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 1.5 sqmm For TLH Repairs ---- etc., complete with all lead | Mtr | 22.42 | 22.42 | 700.0 | False | None | None | False | None | False | 15694.0 | 0 |
| 3092977 | 106329 | None | 2.3.3 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.2.5 sqmm for TLH Repairs ---- etc., complete with all lead | Mtr | 49.56 | 49.56 | 1200.0 | False | None | None | False | None | False | 59472.0 | 0 |
| 3092978 | 106329 | None | 2.3.4 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 4 sqmm for TLH Repairs ---- etc., complete with all lead | Mtr | 74.34 | 74.34 | 400.0 | False | None | None | False | None | False | 29736.0 | 0 |
| 3092979 | 106329 | None | 2.3.5 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.6 sqmm For TLH Repairs ---- etc., complete with all lead | Mtr | 108.56 | 108.56 | 200.0 | False | None | None | False | None | False | 21712.0 | 0 |
| 3092980 | 106329 | None | 5.19.4 | Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I -3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure I Single Door 12 Way SP & N for TLH repairs ---- etc., complete with all lead | Each | 2198.34 | 2198.34 | 3.0 | False | None | None | False | None | False | 6595.02 | 0 |
| 3092981 | 106329 | None | 5.19.11 | Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosureIII - Double Door 4 Way TPN DB ---- etc., complete with all lead | Each | 4764.84 | 4764.84 | 1.0 | False | None | None | False | None | False | 4764.84 | 0 |
| 3092982 | 106329 | None | 5.18 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32Amps SP for TLH Repairs ---- etc., complete with all lead | Each | 489.7 | 489.7 | 45.0 | False | None | None | False | None | False | 22036.5 | 0 |
| 3092983 | 106329 | None | 5.18.9 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 50-63Amps TPN For TLH Repairs ---- etc., complete with all lead | Each | 3643.84 | 3643.84 | 11.0 | False | None | None | False | None | False | 40082.24 | 0 |
| 3092984 | 106329 | None | 5.18.4 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32Amps DP For TLH Repairs ---- etc., complete with all lead | Each | 872.02 | 872.02 | 16.0 | False | None | None | False | None | False | 13952.32 | 0 |
| 3092985 | 106329 | None | 5.20.8 | Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240/450V up to 300mA sensitivity on existing wood/panel board 32-40 Amps 4 pole for TLH Repairs ---- etc., complete with all lead | Each | 6073.46 | 6073.46 | 2.0 | False | None | None | False | None | False | 12146.92 | 0 |
| 3092986 | 106329 | None | 32.07 | LT UG CABLES 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 25 Sqmm, 3.5 Core, (12 GI Strips - 4 x 0.8 mm) ---- etc., complete with all lead | Km | 164.66 | 164.66 | 0.3 | False | None | None | False | None | False | 49.398 | 0 |
| 3092987 | 106329 | None | SR 19-20-6.11.3 | Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) 32mm dia ---- etc., complete with all lead | Each | 138.06 | 138.06 | 20.0 | False | None | None | False | None | False | 2761.2 | 0 |
| 3092988 | 106329 | None | BSR 49.06 | Supplying and fixing of class A (medium duty) GI pipe of wall thick ness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV class. 63mm ---- etc., complete with all lead | Mtr | 489.7 | 489.7 | 20.0 | False | None | None | False | None | False | 9794.0 | 0 |
| 3092989 | 106329 | None | BSR 49.05 | Supplying and fixing of class A (medium duty) GI pipe of wall thick ness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV class. 50mm dia ---- etc., complete with all lead | Mtr | 451.94 | 451.94 | 10.0 | False | None | None | False | None | False | 4519.4 | 0 |
| 3092990 | 106329 | None | SR 19-20-6.17.12 | Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 120 sqmm Long Barrel ---- etc., complete with all lead | Each | 224.2 | 224.2 | 20.0 | False | None | None | False | None | False | 4484.0 | 0 |
| 3092991 | 106329 | None | SR 19-20-6.17.7 | Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.25 sqmm Long Barrel ---- etc., complete with all lead | Each | 23.6 | 23.6 | 10.0 | False | None | None | False | None | False | 236.0 | 0 |
| 3092992 | 106329 | None | BSR-29.03 | Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr,Supplying and Displaying necessary Danger Boards and Lighting, Using sightRails and Sign Boards at every 100 Mtr wherever necessary as directed In soil (hard) ---- etc., complete with all lead | cm | 459.02 | 459.02 | 90.0 | False | None | None | False | None | False | 41311.8 | 0 |
| 3092993 | 106329 | None | SR 19-20-6.1 | Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm alround with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts. ---- etc., complete with all lead | No | 3539.65 | 3539.65 | 2.0 | False | None | None | False | None | False | 7079.3 | 0 |
| 3092994 | 106329 | None | SR 19-20-6.18.4 | Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc., 12 SWG Copper wire. ---- etc., complete with all lead | Mtr | 68.44 | 68.44 | 20.0 | False | None | None | False | None | False | 1368.8 | 0 |
| 3092995 | 106329 | None | SR 19-20-6.3.1 | Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip ---- etc., complete with all lead | Mtr | 88.5 | 88.5 | 20.0 | False | None | None | False | None | False | 1770.0 | 0 |
| 3092996 | 106329 | None | 5.42.2 | Fabricating supplying and mounting MS box made out .SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour etc., complete16SWG - etc., complete with all lead & lift and work to be executed as per the specification and Engineer-in-charge of the work. ---- etc., complete with all lead | Sq | 0.51 | 0.51 | 100000.0 | False | None | None | False | None | False | 51000.0 | 0 |
| 3092997 | 106329 | None | 5.40.1 | Supplying .amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 100Amps 4x30x6mm Aluminum Strips - etc., complete with all lead & lift and work to be executed as per the specification and Engineer-in-charge of the work. ---- etc., complete with all lead | Mtr | 2908.7 | 2908.7 | 3.0 | False | None | None | False | None | False | 8726.1 | 0 |
| 3092998 | 106329 | None | 5.41.2 | Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 50x100x50x6mm C channel - etc., complete with all lead & lift and work to be executed as per the specification and Engineer-in-charge of the work. ---- etc., complete with all lead | Mtr | 466.1 | 466.1 | 6.0 | False | None | None | False | None | False | 2796.6 | 0 |
| 3092999 | 106329 | None | 5.38 | Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C - etc., complete with all lead & lift and work to be executed as per the specification and Engineer-in-charge of the work. ---- etc., complete with all lead | Each | 607.7 | 607.7 | 3.0 | False | None | None | False | None | False | 1823.1 | 0 |
| 3093000 | 106329 | None | 5.33 | Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy - etc., complete with all lead & lift and work to be executed as per the specification and Engineer-in-charge of the work. ---- etc., complete with all lead | Each | 10991.7 | 10991.7 | 1.0 | False | None | None | False | None | False | 10991.7 | 0 |
| 3093001 | 106329 | None | 5.34 | Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound (48/6.32) - etc., complete with all lead & lift and work to be executed as per the specification and Engineer-in-charge of the work. ---- etc., complete with all lead | Each | 663.16 | 663.16 | 3.0 | False | None | None | False | None | False | 1989.48 | 0 |
| 3093002 | 106329 | None | 11.3.2 | Electrical Fixtures: Supplying of .feet - PVC Batten with integrated LED tube .W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V 50/60Hz & Power factor
0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.LED light fighting 1 x4'- 20/22 w for TLH Repairs ---- etc., complete with all lead | Each | 814.2 | 814.2 | 45.0 | False | None | None | False | None | False | 36639.0 | 0 |
| 3093003 | 106329 | None | 11.5.2 | Supply of round/square recess/surface mounted rolling type
LED Down light with . W GU 10 LED Lamp Rib Fabricated
from diecast aluminium with white powder coated prewired to
mains connector & has swivelling unit of aluminium die cast eye ball
& LED Lamp position retained by circular wire spring, with Life of
25000 burning hours & 70% lumen maintenance with CRI 80.
Power Input: 220-240V @50/60Hz & Power factor 0.9 along with CE
approved. 2years Warranty against any manufacturing defect working
under standard electrical condition. LED square or round down light 10-12W ---- etc., complete with all lead | Each | 1044.3 | 1044.3 | 10.0 | False | None | None | False | None | False | 10443.0 | 0 |
| 3093004 | 106329 | None | 12.46 | Supplying & Fixing of 70-150 Watts lamp holder 2 Pin ---- etc., complete with all lead | Each | 74.34 | 74.34 | 15.0 | False | None | None | False | None | False | 1115.1 | 0 |
| 3093005 | 106329 | None | 6.1 | Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. for TLH Repairs ---- etc., complete with all lead | Each | 1760.56 | 1760.56 | 20.0 | False | None | None | False | None | False | 35211.2 | 0 |
| 3093006 | 106329 | None | 6.3.1 | Supplying capacitor type ceiling fan complete with down rodblades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system.48" Sweep (1200mm) Regular model For TLH Repairs ---- etc., complete with all lead | Each | 3521.12 | 3521.12 | 15.0 | False | None | None | False | None | False | 52816.8 | 0 |
| 3093007 | 106329 | None | 13.7.1 | Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps.On wall / ceiling / Rafter / Girders For TLH Repairs ---- etc., complete with all lead | Each | 143.96 | 143.96 | 59.0 | False | None | None | False | None | False | 8493.64 | 0 |
| 3093008 | 106329 | None | 13.1 | Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing 5 amps. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulatedtwin twisted copper wire and wiring. for TLH Repairs ---- etc., complete with all lead | Each | 201.78 | 201.78 | 15.0 | False | None | None | False | None | False | 3026.7 | 0 |
| 3093009 | 106329 | None | 13.13 | Fixing one exhaust fan after making a suitable notch in the wall and
finishing with cement mortar and colouring to match the existing wall
or brackets, with bolts and nuts and a 5 A, ceiling rose with
sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of
approved make with wire mesh and wooden frame. for TLH rapaires ---- etc., complete with all lead | Each | 834.26 | 834.26 | 20.0 | False | None | None | False | None | False | 16685.2 | 0 |
| 3093010 | 106329 | None | 11.8.2 | Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr Lumen Maintenance of 70percent, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .W System Power consumption. LED Efficiency 130lm/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI any Government certified agency Design Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer Cree/Nichia/ Lumileds/Osram make LED Source.LED Streetlight 40W for TLH Repairs ---- etc., complete with all lead | Each | 4748.32 | 4748.32 | 5.0 | False | None | None | False | None | False | 23741.6 | 0 |
| 3093011 | 106329 | None | 13.5 | Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. for TLH Repairs ---- etc., complete with all lead | Each | 191.16 | 191.16 | 5.0 | False | None | None | False | None | False | 955.8 | 0 |