| 1710499997000 | 0 | None | None | Buildings | Construction of special Residential school for mentally retarded childrens in Hosapete City Limits Under AMNP-4 Grants | 5337556.14 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3090310 | 106264 | None | HPT001 | Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement complete as per drawing and technical specification Volume I Page No. 90 Item No. 2.11. | Tonne | 93929.85 | 93929.85 | 14.25 | False | None | None | False | None | False | 1338500.3625 | 0 | | 3090311 | 106264 | None | HPT002 | Filling available excavated earth (excluding rock in trenches, plinth,sides of foundations and other similar works etc. in layers not exceeding20cm in depth, consolidating each deposited layer by ramming andwatering, lead up to 50 m and lift upto 1.5 m. Vol I Item No.1.9 Page No.7 | Cum | 279.3 | 279.3 | 247.55 | False | None | None | False | None | False | 69140.715 | 0 | | 3090312 | 106264 | None | HPT003 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1 4 (1 cement 4 fine sand including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in charge. Vol II Item No.8.2.1 Page No. 41 | Sqm | 309.75 | 309.75 | 446.19 | False | None | None | False | None | False | 138207.3525 | 0 | | 3090313 | 106264 | None | HPT004 | Earth work excavation for Foundation by mechanical means for all works and depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting and stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery and other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m (PWD SR 2021 22, VOLUME 1, Page No. 8, SI No. 1.14 | Cum | 107.1 | 107.1 | 200.57 | False | None | None | False | None | False | 21481.047 | 0 | | 3090314 | 106264 | None | HPT005 | Providing 20 mm cement plaster of mix 1 4 (1 cement 4 fine sand to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in charge. CSR 23 24, VOL 2, Pg No 41. | Sqm | 371.7 | 371.7 | 260.69 | False | None | None | False | None | False | 96898.473 | 0 | | 3090315 | 106264 | None | HPT006 | COLUMNS Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars and formwork to be paid separately M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 12214.75 | 12214.75 | 5.99 | False | None | None | False | None | False | 73166.3525 | 0 | | 3090316 | 106264 | None | HPT007 | Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1 6 (1 cement 6 coarse sand including cost of all materials, labour, scaffolding and usage charges of machinery and other incidental charges complete as per the direction of engineer incharge of work. | Cum | 8367.45 | 8367.45 | 53.48 | False | None | None | False | None | False | 447491.226 | 0 | | 3090317 | 106264 | None | HPT008 | Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1 3 6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. Vol 2 Sl No. 12.51 P.No 104 | Nos | 1066.8 | 1066.8 | 13.0 | False | None | None | False | None | False | 13868.4 | 0 | | 3090318 | 106264 | None | HPT009 | Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures Vol 2 Sl No. 12.17 P.No 100 | Sqm | 7439.25 | 7439.25 | 22.68 | False | None | None | False | None | False | 168722.19 | 0 | | 3090319 | 106264 | None | HPT010 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Vol 2 Sl No.11.34A P.No.86 | Kg | 176.4 | 176.4 | 408.24 | False | None | None | False | None | False | 72013.536 | 0 | | 3090320 | 106264 | None | HPT011 | Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m. Including cost of all labour complete as per specifications Vol. I / Item 1.1 | Cum | 168.0 | 168.0 | 94.59 | False | None | None | False | None | False | 15891.12 | 0 | | 3090321 | 106264 | None | HPT012 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Two coats applied on walls at 1.25 ltr/10 m² over and including one coat of Special primer applied at 0.75 ltr /10 m² with paint of approved quality to givean even shade, after thoroughly brooming the surface to remove all dirt,dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge Vol 2 . Page no 46,Item No 8.33.1 | Sqm | 165.9 | 165.9 | 875.37 | False | None | None | False | None | False | 145223.883 | 0 | | 3090322 | 106264 | None | HPT013 | Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1 6, 20 mm thick, and joints finished with cement mortar 1 3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications Vol 2 Sl No.9.19 P.No.62 | Sqm | 5594.4 | 5594.4 | 50.71 | False | None | None | False | None | False | 283692.024 | 0 | | 3090323 | 106264 | None | HPT014 | Providing and fixing Stainless steel ( Grade 304 railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polish ing and making curvature (wherever required and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories and stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer in charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc. including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge. Vol 2 .Page no 85,Item No 11.28. | Sqm | 593.25 | 593.25 | 392.4 | False | None | None | False | None | False | 232791.3 | 0 | | 3090324 | 106264 | None | HPT015 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead and lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications..(PWD Common Sr 2023 24. Vol 1 . Page no 16.Item No 2.4.3 | Cum | 11309.76 | 11309.76 | 5.45 | False | None | None | False | None | False | 61638.192 | 0 | | 3090325 | 106264 | None | HPT016 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead and lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications..(PWD Common Sr 2023 24. Vol 1 . Page no 16.Item No 2.4.3 | Cum | 9979.2 | 9979.2 | 15.64 | False | None | None | False | None | False | 156074.688 | 0 | | 3090326 | 106264 | None | HPT017 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (PWD Common Sr 2023 24. Vol 1 . Page no 16.Item No 2.5.2 | Cum | 10777.72 | 10777.72 | 29.62 | False | None | None | False | None | False | 319236.0664 | 0 | | 3090327 | 106264 | None | HPT018 | chajja Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (PWD Common Sr 2023 24. Vol 1 . Page no 16.Item No 2.5.2 | Cum | 10418.46 | 10418.46 | 2.27 | False | None | None | False | None | False | 23649.9042 | 0 | | 3090328 | 106264 | None | HPT019 | Roof Beam Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (PWD Common Sr 2023 24. Vol 1 . Page no 16.Item No 2.5.2 | Cum | 11496.24 | 11496.24 | 11.62 | False | None | None | False | None | False | 133586.3088 | 0 | | 3090329 | 106264 | None | HPT020 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead and lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. .Mix 1 3 6 Using 20 mm nominal size graded crushed coarse aggregates (PWD Common Sr 2023 24. Vol 1. Page no 15,Item No 2.1.4 | Cum | 6527.85 | 6527.85 | 1.86 | False | None | None | False | None | False | 12141.801 | 0 | | 3090330 | 106264 | None | HPT021 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead and lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement and formwork shall be paid separately .Mix 1 3 6 (M10 Using 40 mm nominal size graded crushed coarse aggregates (PWD Common Sr 2023 24. Vol 1. Page no 15,Item No 2.1.3 | Cum | 6477.1 | 6477.1 | 30.64 | False | None | None | False | None | False | 198458.344 | 0 | | 3090331 | 106264 | None | HPT022 | Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (PWD Common Sr 2023 24. Vol 1 .Page no 16,Item No 2.5.2. | Cum | 8622.18 | 8622.18 | 6.84 | False | None | None | False | None | False | 58975.7112 | 0 | | 3090332 | 106264 | None | HPT023 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD Common Sr 2023 24. Vol 1 . Page no 15.Item No 2.2.3 | Cum | 6852.38 | 6852.38 | 45.95 | False | None | None | False | None | False | 314866.861 | 0 | | 3090333 | 106264 | None | HPT024 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead and lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement and formwork to be paid separately .(PWD Common Sr 2023 24. Vol 1 . Page no 16.Item No 2.4.3 | Cum | 7318.08 | 7318.08 | 19.91 | False | None | None | False | None | False | 145702.9728 | 0 | | 3090334 | 106264 | None | HPT025 | Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps , but including cost of materials, labour, usage charges complete as per specifications.(PWD Vol 2 Common Sr 2023 24.Page No 99, Item No 12.11 | Cum | 144977.7 | 144977.7 | 0.2 | False | None | None | False | None | False | 28995.54 | 0 | | 3090335 | 106264 | None | HPT026 | Providing Red Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps , but including cost of materials, labour, usage charges complete as per specifications.(PWD Vol 2 Common Sr 2023 24.Page No 100,Item No 12.13.2 | Cum | 104580.0 | 104580.0 | 0.99 | False | None | None | False | None | False | 103534.2 | 0 | | 3090336 | 106264 | None | HPT027 | Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. ( excluding cost of fixtures (PWD Vol 2 Common Sr 2023 24.Page No 100,Item No 12.15 | Sqm | 7816.2 | 7816.2 | 2.88 | False | None | None | False | None | False | 22510.656 | 0 | | 3090337 | 106264 | None | HPT028 | Providing and fixing bright finished brass hanging type floor Door stopper with necessary screws, etc. complete.(PWD Vol 2 Common Sr 2023 24.Page No 105,Item No 12.58 | Nos | 126.0 | 126.0 | 13.0 | False | None | None | False | None | False | 1638.0 | 0 | | 3090338 | 106264 | None | HPT029 | Providing and fixing Chromium plated brass night latch of approved,quality including necessary screws etc. complete.(PWD Vol 2 Common Sr 2023 24.Page No 105, Item No 12.61 | Nos | 1039.5 | 1039.5 | 19.0 | False | None | None | False | None | False | 19750.5 | 0 | | 3090339 | 106264 | None | HPT030 | Providing and fixing Chromium plated brass handles of 100/125 mm with necessary screws etc. complete
.(PWD Vol 2 Common Sr 2023 24. Page No 105,Item No 12.62 | Nos | 248.85 | 248.85 | 26.0 | False | None | None | False | None | False | 6470.1 | 0 | | 3090340 | 106264 | None | HPT031 | Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms.(PWD Vol 2 Common Sr 2023 24.Page No 105, Item No 12.64 | Nos | 57.75 | 57.75 | 19.0 | False | None | None | False | None | False | 1097.25 | 0 | | 3090341 | 106264 | None | HPT032 | Providing and fixing bright finished brass tower bolts (barrel type 200x10mm with necessary screws etc. complete (PWD Vol 2 Common Sr 2023 24.Page No 107,Item No 12.76.2 | Nos | 367.5 | 367.5 | 38.0 | False | None | None | False | None | False | 13965.0 | 0 | | 3090342 | 106264 | None | HPT033 | Providing and fixing bright finished brass tower bolts (barrel type 150x10mm with necessary screws etc. complete .(PWD Vol 2 Common Sr 2023 24. Page No 107,Item No 12.76.3 | Nos | 303.45 | 303.45 | 36.0 | False | None | None | False | None | False | 10924.2 | 0 | | 3090343 | 106264 | None | HPT034 | Providing and fixing bright finished brass tower bolts (barrel type 100x10mm with necessary screws etc. complete .(PWD Vol 2 Common Sr 2023 24.Page No 107, Item No 12.76.4 | Nos | 206.85 | 206.85 | 42.0 | False | None | None | False | None | False | 8687.7 | 0 | | 3090344 | 106264 | None | HPT035 | Providing and fixing ISI marked 125x65x2.12 mm M.S. pressed butt hinges bright finished with necessary screws etc.(PWD Vol 2 Common Sr 2023 24.Page No 106, Item No 12.68.1 | Nos | 57.75 | 57.75 | 96.0 | False | None | None | False | None | False | 5544.0 | 0 | | 3090345 | 106264 | None | HPT036 | Providing and fixing of 3 track x 2 panel sliding windows made out of multichambered UPVC(Matching to RAL 9016 sections and with minimumTiO2(Titanium Dioxide at 6PHR with TPE(Thermo Plastic Elastomer
and lead free, gaskets grey colour having isolated drainage andreinforced with Galvanized Iron profile through out the window frame.The outer frame having an overall size of 108mm width x 45mmheightwith reinforcement of 1mm thickness and Sash with overall size of 39mmx 75mm with GI reinforcement of 2mm and mesh sash of size 37mmx 58mm. Coextruded Glazing bead for fixing of glass shall be of size20mm x 24 mm. Windows shall be provided with 6mm plain float glass,standard hardwareand Multi point locking system with touch lock. Wallthickness of frame and sash shall be of 2mm 2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures andseparate charges for minor TandP's shall not be made (PWD Common Sr 2023 24. Vol 2 .Page no 110,Item No 12.90. | Sqm | 7070.7 | 7070.7 | 19.44 | False | None | None | False | None | False | 137454.408 | 0 | | 3090346 | 106264 | None | HPT037 | Providing and fixing in position collapsible steel shutters withvertical channels 20x10x2 mm and braced with flat iron diagonals20x5 mm size, with top and bottom rail of T iron 40x40x6 mm,with 40 mm dia steel pulleys, complete with bolts, nuts, lockingarrangement, stoppers, handles, including applying a priming coat ofapproved steel primer including cost of materials ,labour, usage chargesof machinery complete as per specifications and as per directions ofthe Engineer in Charge..(PWD Common Sr 2023 24. Vol 2 .Page no 77,Item No 11.3 | Sqm | 8689.8 | 8689.8 | 2.88 | False | None | None | False | None | False | 25026.624 | 0 | | 3090347 | 106264 | None | HPT038 | Providing 6 mm cement plaster with cement mortar 1 3 (1 cement 3 fine sand including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in charge.(PWD Common Sr 2023 24. Vol 2 .Page no 43,Item No 8.10. | Sqm | 221.55 | 221.55 | 168.49 | False | None | None | False | None | False | 37328.9595 | 0 | | 3090348 | 106264 | None | HPT039 | Providing and applying white cement based putty of average thick ness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.(PWD Vol 2 Common Sr 2023 24.Page No 50,Item No 8.51 | Sqm | 105.0 | 105.0 | 614.68 | False | None | None | False | None | False | 64541.4 | 0 | | 3090349 | 106264 | None | HPT040 | Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineer in Charge..(PWD Common Sr 2023 24. Vol 2 .Page no 43,Item No 8.12. | Sqm | 67.2 | 67.2 | 260.69 | False | None | None | False | None | False | 17518.368 | 0 | | 3090350 | 106264 | None | HPT041 | Providing and laying Vitrified tiles in Size of Tile 600x600 mm sizes (thickness to be specified by manufacturer , with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shade, over 12 mm thick bed of cement mortar 1 3 (1 cement 3 coarse sand , jointing with grey cement slurry at 3.3 kg/ m2 including grouting the joint with white cement and matching pigments etc. complete.(PWD Vol 2 Common Sr 2022.Page No 61, item no 9.17.2 | Sqm | 1233.75 | 1233.75 | 184.34 | False | None | None | False | None | False | 227429.475 | 0 | | 3090351 | 106264 | None | HPT042 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied at 0.90 ltr/10 m² over an under coat of primer applied at 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifica tions and as per directions of Engineer in charge.(PWD Common Sr 2023 24. Vol 2 .Page no 47,Item No 8.33.3. | Sqm | 145.95 | 145.95 | 22.32 | False | None | None | False | None | False | 3257.604 | 0 | | 3090352 | 106264 | None | HPT043 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied at 0.90 ltr/10 m² over an under coat of primer applied at0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer in charge.PWD Vol 2 Common Sr 2023 24.Page No 46.Item No 8.33.2 | Sqm | 181.13 | 181.13 | 88.92 | False | None | None | False | None | False | 16106.0796 | 0 | | 3090353 | 106264 | None | HPT044 | Supplying heavygauge PVC conduitpipe......mmdia..........mm thick confirming to IS 2509 with suitable size bends, metal / PVC Junction boxes,adhesive paste etc.,and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and un used ways of junction boxes and pipe ends should be covered usingPVCendenclosures, run with18SWG GI fish wire wherever necessary.(PWD Vol 6 PWD Ele SR 2 23 24.Page No 2, 19/20 mm dia 2 mm thick Item No 1.2.1 | Rmtr | 69.3 | 69.3 | 200.0 | False | None | None | False | None | False | 13860.0 | 0 | | 3090354 | 106264 | None | HPT045 | Supplying heavygauge PVC conduitpipe......mmdia..........mm thick confirming to IS 2509 with suitable size bends, metal / PVC Junction boxes,adhesive paste etc.,and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and un used ways of junction boxes and pipe ends should be covered usingPVCendenclosures, run with18SWG GI fish wire wherever necessary.(PWD Vol 6 PWD Ele SR 2 23 24.Page No 2, 25 mm dia 2 mm thick Item No 1.2.2 | Rmtr | 81.9 | 81.9 | 150.0 | False | None | None | False | None | False | 12285.0 | 0 | | 3090355 | 106264 | None | HPT046 | Supplying and fixing sheet Metal box made out of 18SWG sheet metal with necessary holes for cable / conduit entry as required with one coat of primer of approved make etc.(PWD Vol 6 PWD Ele SR 2 23 24.Page No 2, 100 x 75 x 65 mm Item No 1.4.2 | Each | 123.9 | 123.9 | 40.0 | False | None | None | False | None | False | 4956.0 | 0 | | 3090356 | 106264 | None | HPT047 | Supplying and fixing sheet Metal box made out of 18SWG sheet metal with necessary holes for cable / conduit entry as required with one coat of primer of approved make etc.(PWD Vol 6 PWD Ele SR 2 23 24.Page No 2, 180 x 90 x 65 mm thick Item No 1.4.4 | Each | 169.05 | 169.05 | 20.0 | False | None | None | False | None | False | 3381.0 | 0 | | 3090357 | 106264 | None | HPT048 | Extra for Groove cutting inbrick wall / CC floor to the suitable depth for concealing of Conduit / GI pipe and plastering, finishing up to wall surface complete.(PWD Vol 6 upto 50 mm conduit in brick wall Item No 1.7.1, | Rmtr | 30.45 | 30.45 | 200.0 | False | None | None | False | None | False | 6090.0 | 0 | | 3090358 | 106264 | None | HPT049 | Supplying and fixing PVC/metal conduit Deep junction box.(PWD Vol 6 PWD Ele SR 2 23 24.Page No 2, 19/20 mm deep Junction box Item No 1.5.1 | Each | 51.45 | 51.45 | 45.0 | False | None | None | False | None | False | 2315.25 | 0 | | 3090359 | 106264 | None | HPT050 | Supplying and fixing PVC/metal conduit Deep junction box.(PWD Vol 6 PWD Ele SR 2 23 24.Page No 2, 25 mm deep Junction box Item No 1.5.2 | Each | 58.8 | 58.8 | 25.0 | False | None | None | False | None | False | 1470.0 | 0 |
|