createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1710321894088 version 4 createdDate None modifiedDate None tenderType RFQ evaluationType TWO_COVER evaluationTypeText Two Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 7500.00 emd 1883000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 12-04-2024 16:00:00 tenderQueryClose 26-03-2024 15:00:00 technicalBidOpen 15-04-2024 16:30:00 publishedDate 13-03-2024 16:22:48 publishedByPost EWHFWD_CE_CEOFF_BNG publishedByUser KPE16838 - BALEKATTE KUMARASWAMY PAVITHRA bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate 27-03-2024 11:30:00 preBidMeetingYn True preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson Assistant Engineer splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08029557023 mobileNumber 9449843375 tenderSupplierList None
tenderSchedule	createdTs 1710321894118 version 9 createdDate None modifiedDate None tenderNumber EWHFWD/2023-24/BD/WORK_INDENT227 title CONSTRUCTION OF 50 BEDDED CRITICAL CARE BLOCK IN THE PREMISES OF GIMS GADAG IN GADAG DISTRICT description CONSTRUCTION OF 50 BEDDED CRITICAL CARE BLOCK IN THE PREMISES OF GIMS GADAG IN GADAG DISTRICT category WORKS categoryText Works ecv 188310135.29 deptName Engineering Wing of Health and Family Welfare Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn False location 3521 locationName EWHFWD Chief Engineer Office Bengaluru provisionalAmount 212500000.0 groupOverheadTotal 0.0 fileNumber aeeengdwd-192023-24
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1710321894000 0 None None Buildings Civil - Ground Floor 53692136.69 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3036667 102486 None Item 2.5A Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness.By Mechanical Means using Dozer In area of light jungle for 100sqm ---- etc., complete with all lead Sqm 477.65 477.65 30.114 False None None False None False 14383.9521 0 3036668 102486 None Item 1.12 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. ---- etc., complete with all lead Cum 115.46 115.46 903.33 False None None False None False 104298.4818 0 3036669 102486 None Item 1.14.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work 1.14.1 In all kinds of soils Depth upto 3 m. ---- etc., complete with all lead Cum 123.97 123.97 1400.4 False None None False None False 173607.588 0 3036670 102486 None Item 1.15.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting upto 1.5 m depth ---- etc., complete with all lead Cum 441.19 441.19 257.88 False None None False None False 113774.0772 0 3036671 102486 None Item 1.15.2 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work Depth exceeding 1.5 m, but not exceeding 3 m ---- etc., complete with all lead Cum 516.54 516.54 85.96 False None None False None False 44401.7784 0 3036672 102486 None Item 1.1A Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/Kankar/Moorum. ---- etc., complete with all lead Cum 164.08 164.08 1225.35 False None None False None False 201055.428 0 3036673 102486 None Item 4.1 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. ---- etc., complete with all lead Sqm 143.41 143.41 1882.0 False None None False None False 269897.62 0 3036674 102486 None Item 1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- etc., complete with all lead Cum 323.29 323.29 703.333 False None None False None False 227380.52557 0 3036675 102486 None Item 1.8 Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. ---- etc., complete with all lead Cum 576.09 576.09 1879.383 False None None False None False 1082693.75247 0 3036676 102486 None Item 2.1.3 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates. Including FormWork ---- etc., complete with all lead Cum 7279.03 7279.03 322.338 False None None False None False 2346307.97214 0 3036677 102486 None Item 2.2.3 footing Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Including FormWork ---- etc., complete with all lead Cum 8316.84 8316.84 362.892 False None None False None False 3018114.70128 0 3036678 102486 None Item 2.2.3 Pedastal Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Including FormWork ---- etc., complete with all lead Cum 8470.85 8470.85 23.04 False None None False None False 195168.384 0 3036679 102486 None Item 2.5.2 Columns,lift core wall and curtain wall Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.Including FormWork ---- etc., complete with all lead Cum 14138.86 14138.86 170.54 False None None False None False 2411241.1844 0 3036680 102486 None Item 2.5.2 PLINTH BEAM Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 12475.47 12475.47 114.64 False None None False None False 1430187.8808 0 3036681 102486 None Item 2.5.2 ROOF BEAM : Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 13307.16 13307.16 163.6211 False None None False None False 2177332.157076 0 3036682 102486 None Item 2.5.2 RCC SLAB : Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 12475.47 12475.47 305.012 False None None False None False 3805168.05564 0 3036683 102486 None Item 2.5.2 RCC STAIRCASE : Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 12475.47 12475.47 7.119 False None None False None False 88812.87093 0 3036684 102486 None Item 2.5.2 LINTELS : Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 13307.16 13307.16 6.434 False None None False None False 85618.26744 0 3036685 102486 None Item 2.5.1 sill:Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.Including FormWork ---- etc., complete with all lead Cum 11684.25 11684.25 5.044 False None None False None False 58935.357 0 3036686 102486 None Item 8.16 a Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup boards including cost of all materials, labour, providing and removing form work usage charges, curing, complete as per specifications. ---- etc., complete with all lead Sqm 1504.66 1504.66 12.285 False None None False None False 18484.7481 0 3036687 102486 None Item 2.11 a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. ---- etc., complete with all lead MT 108726.03 108726.03 144.6723 False None None False None False 15729644.829969 0 3036688 102486 None Approved Rate Extra for providing throating or drip moulding to RCC chejjas with plastering ( labour charges only ) as per specifications. Specification No . KBS ---- etc., complete with all lead m 38.94 38.94 119.6 False None None False None False 4657.224 0 3036689 102486 None Item Approved Rate Providing throating elevation Patti on uniform size 10 cm wide and 12 mm thick for portico, chejjas & parapet wall elevation etc, including cost of materials , labour floor fixing, HOM of equipments and machineries all leads and lift loading and unloading, transportation , all other incidental charges at all floor levels etc, complete all as per specifications and as directed by the Engineer in charge. GROUND FLOOR (Qty as per It no.23 drip moulding) ---- etc., complete with all lead m 86.14 86.14 119.6 False None None False None False 10302.344 0 3036690 102486 None Item 5.4 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) ---- etc., complete with all lead Cum 7765.19 7765.19 12.12 False None None False None False 94114.1028 0 3036691 102486 None Item 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1592.17 1592.17 2474.56 False None None False None False 3939920.1952 0 3036692 102486 None Item 6.34 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1341.8 1341.8 95.3 False None None False None False 127873.54 0 3036693 102486 None Item 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. ---- etc., complete with all lead Cum 120099.75 120099.75 3.082 False None None False None False 370147.4295 0 3036694 102486 None Item 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ---- etc., complete with all lead Nos 1234.84 1234.84 37.0 False None None False None False 45689.08 0 3036695 102486 None Item 22.15.2 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Handles 300mm ---- etc., complete with all lead Nos 668.46 668.46 74.0 False None None False None False 49466.04 0 3036696 102486 None Item 22.15.4 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Aldrop 16mm dia, 300mm ---- etc., complete with all lead Nos 455.77 455.77 37.0 False None None False None False 16863.49 0 3036697 102486 None Item 22.15.6 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Tower Bolts 200x10mm ---- etc., complete with all lead Nos 182.31 182.31 74.0 False None None False None False 13490.94 0 3036698 102486 None Item 22.15.9 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS hinges 100 mm ---- etc., complete with all lead Nos 85.2 85.2 148.0 False None None False None False 12609.6 0 3036699 102486 None Item 22.15.10 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Door stopper 75mm ---- etc., complete with all lead Nos 121.53 121.53 37.0 False None None False None False 4496.61 0 3036700 102486 None Item 12.6 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. ---- etc., complete with all lead Nos 1278.6 1278.6 37.0 False None None False None False 47308.2 0 3036701 102486 None Item 10.6.3 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm ---- etc., complete with all lead Nos 72.92 72.92 222.0 False None None False None False 16188.24 0 3036702 102486 None Item 12.57.6 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.-do- 35 mm thick both side Commercial ---- etc., complete with all lead Sqm 4037.55 4037.55 136.8 False None None False None False 552336.84 0 3036703 102486 None Item 12.90 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete with all lead Sqm 8184.5 8184.5 78.3 False None None False None False 640846.35 0 3036704 102486 None Item 12.85 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete with all lead Sqm 6950.4 6950.4 3.23 False None None False None False 22449.792 0 3036705 102486 None Item 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding ---- etc., complete with all lead Kg 204.18 204.18 1712.34 False None None False None False 349625.5812 0 3036706 102486 None Item 12.93.1 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately)Size 62 x 100mm ---- etc., complete with all lead m 853.21 853.21 54.0 False None None False None False 46073.34 0 3036707 102486 None Item 12.94.1 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately)30 mm thickness ---- etc., complete with all lead Sqm 4235.66 4235.66 17.01 False None None False None False 72048.5766 0 3036708 102486 None Item 12.59 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. ---- etc., complete with all lead Nos 1353.95 1353.95 46.0 False None None False None False 62281.7 0 3036709 102486 None Item 11.25.2 Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete with all lead Kg 165.29 165.29 863.99 False None None False None False 142808.9071 0 3036710 102486 None Item 8.4.2.. Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge... ( Inside) ---- etc., complete with all lead Sqm 379.2 379.2 3476.17 False None None False None False 1318163.664 0 3036711 102486 None Item 8.10 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 256.44 256.44 2854.12 False None None False None False 731910.5328 0 3036712 102486 None Item 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- etc., complete with all lead Sqm 121.53 121.53 6330.3 False None None False None False 769321.359 0 3036713 102486 None Item 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. ( Outside) ---- etc., complete with all lead Sqm 424.17 424.17 943.26 False None None False None False 400102.5942 0 3036714 102486 None Item 8.3.1 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per direc- tions of Engineer-in-charge. ---- etc., complete with all lead Sqm 430.25 430.25 40.85 False None None False None False 17575.7125 0 3036715 102486 None Item 8.16.2 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment.Plaster mesh 150mm wide ---- etc., complete with all lead m 46.18 46.18 1835.0 False None None False None False 84740.3 0 3036716 102486 None Item 10.5.2 Bore Packing : Filling the bore wherever necessary with polymer modified concrete and brushing one coat of acrylic copolymer cross linked formulaion on the bore. Including all labour charges tools and equipments, all complete as per the manufacturer. ---- etc., complete with all lead Sqm 283.2 283.2 50.0 False None None False None False 14160.0 0 3036717 102486 None Item 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove. ---- etc., complete with all lead m 63.2 63.2 1073.6 False None None False None False 67851.52 0 3036718 102486 None Item 9.17.2 Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm ---- etc., complete with all lead Sqm 1428.09 1428.09 1548.18 False None None False None False 2210940.3762 0 3036719 102486 None Item 9.1 Providing and laying Cement concrete flooring 40 mm thick with 20 mm nominal size stone aggregate using 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry complete. ---- etc., complete with all lead Sqm 548.14 548.14 152.57 False None None False None False 83629.7198 0 3036720 102486 None Item 9.22.2.. Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm ---- etc., complete with all lead Sqm 1611.62 1611.62 431.75 False None None False None False 695816.935 0 3036721 102486 None Item 9.30 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints fin- ished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. ---- etc., complete with all lead Sqm 6475.65 6475.65 172.07 False None None False None False 1114265.0955 0 3036722 102486 None Item 9.32 Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ---- etc., complete with all lead Sqm 3138.16 3138.16 59.79 False None None False None False 187630.5864 0 3036723 102486 None Item 8.2.1 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 358.54 358.54 658.98 False None None False None False 236270.6892 0 3036724 102486 None Item 15.7 Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re-inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis) ---- etc., complete with all lead Sqm 747.47 747.47 101.85 False None None False None False 76129.8195 0 3036725 102486 None Item 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. ---- etc., complete with all lead Sqm 1080.49 1080.49 66.96 False None None False None False 72349.6104 0 3036726 102486 None Item 9.39 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. ---- etc., complete with all lead Sqm 1761.11 1761.11 227.22 False None None False None False 400159.4142 0 3036727 102486 None Item 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete with all lead Kg 686.7 686.7 749.69 False None None False None False 514812.123 0 3036728 102486 None Item 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 154.35 154.35 6330.3 False None None False None False 977081.805 0 3036729 102486 None Item 8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 L/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 189.6 189.6 943.26 False None None False None False 178842.096 0 3036730 102486 None Item 8.34.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 60.76 60.76 87.3 False None None False None False 5304.348 0 3036731 102486 None Item 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 139.77 139.77 87.3 False None None False None False 12201.921 0 3036732 102486 None Item 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 64.29 64.29 328.3244 False None None False None False 21107.975676 0 3036733 102486 None Item 8.82 Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 no. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) ---- etc., complete with all lead Sqm 822.82 822.82 328.32 False None None False None False 270148.2624 0 3036734 102486 None Item 18.1 Providing and supplying aluminium extruded tubular and other alu- minium sections as per the architectural drawings and approved draw- ings of Chief Architect, GoK.The aluminium quality shall be as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account).The weight of aluminium extruded section shall be taken for purpose of payment. ---- etc., complete with all lead Kg 494.66 494.66 546.0 False None None False None False 270084.36 0 3036735 102486 None Item 18.3 Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-126 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the EngineerinCharge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.18.2)For payment, only the actual area of glass on face 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in m2.(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face 2, 12mm Airgap 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 , Light reflection internal 10 to 15, light reflection external 10 to 20, shading coefficient (0.25-0.28) and U value of 3.0 to 3.3 W/sqm degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement. ---- etc., complete with all lead Sqm 3698.46 3698.46 84.0 False None None False None False 310670.64 0 3036736 102486 None Item 18.4 Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer- in-Charge. ---- etc., complete with all lead Sqm 5053.63 5053.63 24.0 False None None False None False 121287.12 0 3036737 102486 None Item 7.31 Providing and fixing in position 12mm thick plaster of paris (Gypsum anhydrous) for ceiling reinforced with hessian cloth flat surface with ceiling tiles up to a height of 5 m above floor level over aluminium strips 25mm x 6mm and rendered smooth with plaster of paris including cost of materials, labour, curing complete as per specifications. ---- etc., complete with all lead Sqm 1548.41 1548.41 235.88 False None None False None False 365238.9508 0 3036738 102486 None Item 7.41 Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per m2 including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all T sections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge. ---- etc., complete with all lead Sqm 2057.67 2057.67 353.82 False None None False None False 728044.7994 0 3036739 102486 None Item 10.1.1 Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar loca- tions of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of the slab upto 0.50 m2 ---- etc., complete with all lead Sqm 4868.89 4868.89 60.0 False None None False None False 292133.4 0 3036740 102486 None Item Approved Rate Providing and fixing aluminium coated and polyester based netted curtains complete. The work includes cost of all materials, labour charges, lead and lift, etc., complete. ---- etc., complete with all lead m 2596.0 2596.0 80.0 False None None False None False 207680.0 0 3036741 102486 None Item 6.5 Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cement mortar 1:6 (1 cement : 6 coarse sand) With Non modular bricks including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. ---- etc., complete with all lead Cum 13341.44 13341.44 38.19 False None None False None False 509509.5936 0 3036742 102486 None Item 9.136 Providing and fixing fire resistant door frame of section 143 x 57 mm having built in rebate made out of 16 SWG G.I. sheet (zinc coating not less than 120 gm/sqm) duly filled with vermuculite based concrete mix, suitable for mounting 60 minutes fire rated door shutters. The frame is fitted with intumuscent fire seal strip of size 10x4 mm (minimum) alround the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc. complete as per direction of Engineer-in-charge (Dash fastener to bepaid for separately). ---- etc., complete with all lead m 1541.11 1541.11 48.0 False None None False None False 73973.28 0 3036743 102486 None Item 9.137 Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming to IS:3614 (Part-II), tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100 mm wide, bottom rail 200 mm wide, made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/m2) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer etc. all complete as per direction of Engineer-in-charge (panneling to be paid for separately). ---- etc., complete with all lead Sqm 6790.21 6790.21 16.92 False None None False None False 114890.3532 0 1710321894000 1 None None Buildings Civil - First Floor 33642026.56 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3036744 102487 None Item 2.5.2 COLUMNS : Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 14280.25 14280.25 70.6302 False None None False None False 1008616.91355 0 3036745 102487 None Item 2.5.2 RCC BEAMS Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 13440.24 13440.24 149.23 False None None False None False 2005687.0152 0 3036746 102487 None Item 2.5.2 RCC SLAB Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 12600.22 12600.22 250.5 False None None False None False 3156355.11 0 3036747 102487 None Item 2.5.2 Staircase : Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 12600.22 12600.22 6.91 False None None False None False 87067.5202 0 3036748 102487 None Item 2.5.2 LINTELS : Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 13440.24 13440.24 6.196 False None None False None False 83275.72704 0 3036749 102487 None Item 2.1.4 sills:Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead and lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregate ---- etc., complete with all lead Cum 11801.08 11801.08 40.827 False None None False None False 481802.69316 0 3036750 102487 None Item 2.11 a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. ---- etc., complete with all lead MT 109813.3 109813.3 81.06 False None None False None False 8901466.098 0 3036751 102487 None Item Approved Rate Extra for providing throating or drip moulding to RCC chejjas with plastering ( labour charges only ) as per specifications. Specification No . KBS ---- etc., complete with all lead m 40.1 40.1 117.9 False None None False None False 4727.79 0 3036752 102487 None Item Approved Rate Providing throating elevation Patti on uniform size 10 cm wide and 12 mm thick for portico, chejjas and parapet wall elevation etc, including cost of materials , labour floor fixing, HOM of equipments and machineries all leads and lift loading and unloading, transportation , all other incidental charges at all floor levels etc, complete all as per specifications and as directed by the Engineer in charge. ---- etc., complete with all lead m 88.72 88.72 117.9 False None None False None False 10460.088 0 3036753 102487 None Item 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part I) 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1608.09 1608.09 2331.4 False None None False None False 3749101.026 0 3036754 102487 None Item 6.34 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part I) 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1355.21 1355.21 208.98 False None None False None False 283211.7858 0 3036755 102487 None Item 12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. ---- etc., complete with all lead Cum 121300.74 121300.74 2.598 False None None False None False 315139.32252 0 3036756 102487 None Item 12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ---- etc., complete with all lead Nos 1247.18 1247.18 35.0 False None None False None False 43651.3 0 3036757 102487 None Item 22.15.2 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Handles 300mm ---- etc., complete with all lead Nos 675.16 675.16 35.0 False None None False None False 23630.6 0 3036758 102487 None Item 22.15.4 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Aldrop 16mm dia, 300mm ---- etc., complete with all lead Nos 460.32 460.32 35.0 False None None False None False 16111.2 0 3036759 102487 None Item 22.15.6 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Tower Bolts 200x10mm ---- etc., complete with all lead Nos 184.14 184.14 70.0 False None None False None False 12889.8 0 3036760 102487 None Item 22.15.9 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS hinges 100 mm ---- etc., complete with all lead Nos 85.92 85.92 140.0 False None None False None False 12028.8 0 3036761 102487 None Item 22.15.10 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Door stopper 75mm ---- etc., complete with all lead Nos 122.75 122.75 35.0 False None None False None False 4296.25 0 3036762 102487 None Item 12.6 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. ---- etc., complete with all lead Nos 1291.39 1291.39 21.0 False None None False None False 27119.19 0 3036763 102487 None Item 10.6.3 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm ---- etc., complete with all lead Nos 73.65 73.65 210.0 False None None False None False 15466.5 0 3036764 102487 None Item Approved Rate Providing and Fixing of corner beads of wooden door frame to wall including cost of materials, labour charges, complete as per specifications. ---- etc., complete with all lead m 15.44 15.44 218.9 False None None False None False 3379.816 0 3036765 102487 None Item 12.57.6 Providing and fixing flush door shutter made out of solid core block board type, well seasoned chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (partI) 1991. from manufacturer complete as per spcification.do 35 mm thick both side Commercial ---- etc., complete with all lead Sqm 4077.93 4077.93 122.16 False None None False None False 498159.9288 0 3036766 102487 None Item 12.90 Providing and fixing of 3track x 2panel sliding windows made out of multi chambered UPVC(Matching to RAL9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile throughout the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardwareand Multi point locking system with touch lock. Wall thickness of frame and sash shall be of 2mm2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor TandP's shall not be made) ---- etc., complete with all lead Sqm 8266.35 8266.35 68.76 False None None False None False 568394.226 0 3036767 102487 None Item 12.85 Providing and fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile throughout the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor TandP's shall not be made) ---- etc., complete with all lead Sqm 7020.38 7020.38 8.46 False None None False None False 59392.4148 0 3036768 102487 None Item 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding ---- etc., complete with all lead Kg 206.22 206.22 1621.62 False None None False None False 334410.4764 0 3036769 102487 None Item 12.93.1 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows and other Frames/ Chowkhat comprising of virgin PVC polymer of K value 5860 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) and 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of EngineerInCharge. (Fixtures shall be paid for separately)Size 62 x 100mm ---- etc., complete with all lead m 861.74 861.74 108.0 False None None False None False 93067.92 0 3036770 102487 None Item 12.94.1 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 5860 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) and 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately)30 mm thickness ---- etc., complete with all lead Sqm 4278.03 4278.03 34.02 False None None False None False 145538.5806 0 3036771 102487 None Item 12.59 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. ---- etc., complete with all lead Nos 1367.49 1367.49 51.0 False None None False None False 69741.99 0 3036772 102487 None Item 8.4.2 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineerincharge... ( Inside) ---- etc., complete with all lead Sqm 382.99 382.99 3351.12 False None None False None False 1283445.4488 0 3036773 102487 None Item 8.10 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineerincharge. ---- etc., complete with all lead Sqm 259.01 259.01 2447.07 False None None False None False 633815.6007 0 3036774 102487 None Item 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- etc., complete with all lead Sqm 122.75 122.75 5798.2 False None None False None False 711729.05 0 3036775 102487 None Item 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineerincharge ---- etc., complete with all lead Sqm 428.41 428.41 850.86 False None None False None False 364516.9326 0 3036776 102487 None Item 8.3.1 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per direc tions of Engineerincharge. ---- etc., complete with all lead Sqm 434.55 434.55 29.637 False None None False None False 12878.75835 0 3036777 102487 None Item 8.16.2 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. length of mesh only be measured for payment.Plaster mesh 150mm wide ---- etc., complete with all lead m 46.64 46.64 1773.0 False None None False None False 82692.72 0 3036778 102487 None Item 7.18 Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications. ---- etc., complete with all lead Cum 2475.97 2475.97 22.62 False None None False None False 56006.4414 0 3036779 102487 None Item 15.7 Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, selfseal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width and resist hydrostatic pressure upto 16bar for both positive and negative pressure confirming to DIN 1048 part 5 for 56percent reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64percent improvement against control and protecting steel reinforcement against corrosion mixed at 1percent by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix at 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M20 grade of Concrete is considered in the analysis) ---- etc., complete with all lead Cum 754.94 754.94 116.36 False None None False None False 87844.8184 0 3036780 102487 None Item 10.5.2 Bore Packing : Filling the bore wherever necessary with polymer modified concrete and brushing one coat of acrylic copolymer cross linked formulaion on the bore. Including all labour charges tools and equipments, all complete as per the manufacturer. ---- etc., complete with all lead Sqm 291.69 291.69 50.0 False None None False None False 14584.5 0 3036781 102487 None Item 8.79 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineerincharge: 10mm to 15 mm wide and 8 mm deep groove. ---- etc., complete with all lead m 63.83 63.83 962.0 False None None False None False 61404.46 0 3036782 102487 None Item 9.17.2 Providing and laying Vitrified tiles with thickness 910 mm in different sizes with water absorption less than 0.08 percent and conforming to I.S. 15622, of approved make, in all colours and shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry at 3.3 kg/ m2 including grouting the joint with white cement and matching pigments etc. complete.Size of Tile 600x600 mm ---- etc., complete with all lead Sqm 1442.37 1442.37 1415.24 False None None False None False 2041299.7188 0 3036783 102487 None Item 9.22.2 Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08percent and conforming to IS:15622, of approved brand and manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm ---- etc., complete with all lead Sqm 1627.73 1627.73 360.719 False None None False None False 587153.13787 0 3036784 102487 None Item 9.30 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints fin ished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. ---- etc., complete with all lead Sqm 6540.4 6540.4 141.995 False None None False None False 928704.098 0 3036785 102487 None Item 8.2.1 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineerincharge. ---- etc., complete with all lead Sqm 362.13 362.13 603.27 False None None False None False 218462.1651 0 3036786 102487 None Item 9.11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry at 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. ---- etc., complete with all lead Sqm 1091.29 1091.29 75.42 False None None False None False 82305.0918 0 3036787 102487 None Item 9.39 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. ---- etc., complete with all lead Sqm 1778.72 1778.72 242.55 False None None False None False 431428.536 0 3036788 102487 None Item 11.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineerin charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the EngineerinCharge. ---- etc., complete with all lead Kg 693.56 693.56 749.69 False None None False None False 519954.9964 0 3036789 102487 None Item 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineerincharge. ---- etc., complete with all lead Sqm 155.9 155.9 5798.2 False None None False None False 903939.38 0 3036790 102487 None Item 8.32 Finishing walls with 100percent Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied at 1.43 L/ 10 m². Over and including priming coat of exterior primer applied at 0.90 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineerincharge. ---- etc., complete with all lead Sqm 191.5 191.5 850.86 False None None False None False 162939.69 0 3036791 102487 None Item 8.34.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineerincharge. ---- etc., complete with all lead Sqm 61.38 61.38 81.53 False None None False None False 5004.3114 0 3036792 102487 None Item 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineerincharge. ---- etc., complete with all lead Sqm 141.16 141.16 81.54 False None None False None False 11510.1864 0 3036793 102487 None Item 8.34.1 Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineerincharge. ---- etc., complete with all lead Sqm 65.06 65.06 293.18 False None None False None False 19074.2908 0 3036794 102487 None Item 8.82 Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 no. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs.3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of EngineerinCharge. (Final coat to be done in 1 or 2 layers without gap of time.) ---- etc., complete with all lead Sqm 831.05 831.05 293.183 False None None False None False 243649.73215 0 3036795 102487 None Item 18.1 Providing and supplying aluminium extruded tubular and other alu minium sections as per the architectural drawings and approved draw ings of Chief Architect, GoK.The aluminium quality shall be as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 6080 microns conforming to AAMA 2604 of required colour and shade as approved by the EngineerinCharge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account).The weight of aluminium extruded section shall be taken for purpose of payment. ---- etc., complete with all lead Kg 499.61 499.61 546.0 False None None False None False 272787.06 0 3036796 102487 None Item 18.3 Providing, assembling and supplying vision glass panels (IGUs) comprising of hermeticallysealed 612 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface at 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the EngineerinCharge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.18.2)For payment, only the actual area of glass on face at 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in m2.(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face at 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 percent, Light reflection internal 10 to 15percent, light reflection external 10 to 20 percent, shading coefficient (0.250.28) and U value of 3.0 to 3.3 W/ m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement. ---- etc., complete with all lead Sqm 3735.44 3735.44 84.0 False None None False None False 313776.96 0 3036797 102487 None Item 18.4 Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer inCharge. ---- etc., complete with all lead Sqm 5104.17 5104.17 84.0 False None None False None False 428750.28 0 3036798 102487 None Item 7.31 Providing and fixing in position 12mm thick plaster of paris (Gypsum anhydrous) for ceiling reinforced with hessian cloth flat surface with ceiling tiles up to a height of 5 m above floor level over aluminium strips 25mm x 6mm and rendered smooth with plaster of paris including cost of materials, labour, curing complete as per specifications. ---- etc., complete with all lead Sqm 1563.9 1563.9 137.9 False None None False None False 215661.81 0 3036799 102487 None Item 7.41 Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising at 120 grams per m2 including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle precoated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws at 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all T sections shall be prepainted with polyster baked paint, for all heights, as per specifications, drawings and as directed by EngineerinCharge. ---- etc., complete with all lead Sqm 2078.25 2078.25 206.8 False None None False None False 429782.1 0 3036800 102487 None Item 10.1.1 Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar loca tions of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of the slab upto 0.50 m2 ---- etc., complete with all lead Sqm 4917.57 4917.57 60.0 False None None False None False 295054.2 0 3036801 102487 None Item Approved Rate Providing and fixing aluminium coated and polyester based netted curtains complete. The work includes cost of all materials, labour charges, lead and lift, etc., complete. ---- etc., complete with all lead m 2596.0 2596.0 80.0 False None None False None False 207680.0 0 1710321894000 0 None None Buildings Civil - Terrace Floor 6383691.31 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3036802 102488 None Item 2.5.2 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.Including FormWork ---- etc., complete with all lead Cum 14421.64 14421.64 22.86 False None None False None False 329678.6904 0 3036803 102488 None Item 2.5.2 RCC BEAMS Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 13573.31 13573.31 16.536 False None None False None False 224448.25416 0 3036804 102488 None Item 2.5.2 RCC SLAB Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 12724.97 12724.97 21.021 False None None False None False 267491.59437 0 3036805 102488 None Item 2.5.2 LINTELS Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 13573.31 13573.31 0.3 False None None False None False 4071.993 0 3036806 102488 None Item 2.5.1 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregatesTERRACE FLOOR ---- etc., complete with all lead Cum 11917.92 11917.92 0.45 False None None False None False 5363.064 0 3036807 102488 None Item 2.11 a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. ---- etc., complete with all lead MT 110900.55 110900.55 8.11 False None None False None False 899403.4605 0 3036808 102488 None Item 4.21 Extra for providing throating or drip moulding to RCC chejjas with plastering ( labour charges only ) as per specifications. ---- etc., complete with all lead m 38.94 38.94 13.0 False None None False None False 506.22 0 3036809 102488 None Item Approved Rate Providing throating elevation Patti on uniform size 10 cm wide and 12 mm thick for portico, chejjas & parapet wall elevation etc, including cost of materials , labour floor fixing, HOM of equipments and machineries all leads and lift loading and unloading, transportation , all other incidental charges at all floor levels etc, complete all as per specifications and as directed by the Engineer in charge. ---- etc., complete with all lead m 86.14 86.14 182.0 False None None False None False 15677.48 0 3036810 102488 None Item 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1624.02 1624.02 439.91 False None None False None False 714422.6382 0 3036811 102488 None Item 12.90 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- etc., complete with all lead Sqm 8348.19 8348.19 4.32 False None None False None False 36064.1808 0 3036812 102488 None Item 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding ---- etc., complete with all lead Kg 208.26 208.26 113.4 False None None False None False 23616.684 0 3036813 102488 None Item 11.5.1 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in- Charge. ---- etc., complete with all lead Sqm 5551.41 5551.41 5.76 False None None False None False 31976.1216 0 3036814 102488 None Item 8.4.2 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge... ( Inside) ---- etc., complete with all lead Sqm 386.79 386.79 229.92 False None None False None False 88930.7568 0 3036815 102488 None Item 8.10 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 261.58 261.58 103.78 False None None False None False 27146.7724 0 3036816 102488 None Item 8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- etc., complete with all lead Sqm 122.75 122.75 333.7 False None None False None False 40961.675 0 3036817 102488 None Item 8.5.2 Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. ( Outside) ---- etc., complete with all lead Sqm 432.65 432.65 801.52 False None None False None False 346777.628 0 3036818 102488 None Item Approved Rate Roof Water Proofing. Surface Preparation: remove all surface laitance and contamination free from loose aggregate or other sharp protrusions with fairly smooth finish by wire brush and grinding method and surface shall be DRY for application of single component pitch modified polyurethane cures by reaction with atmospheric moisture to given a tough elastomeric waterproof membrane. System : Provide and applying 1.2 mm thick roller applied single component bitumen modified polyurathene coating NITPROOF 600 or equivalent, having elongation capacity of 450 % as per ASTM D412, having Tensile strength 1.5 n/mm2 as per ASTM D 412, Tear resistance of 15 N as per ASTM D 624 and having shore A Hardness 50 as per ASTM D 2240. Waterproofing treatment to be provided after proper surface preparation as per Manufacture Specification. Protection of waterproofing system with minimum 50 mm thick screed and providing construction joints and sealing the same with PU sealant.TERRACE FLOOR ---- etc., complete with all lead Sqm 1593.0 1593.0 1850.0 False None None False None False 2947050.0 0 3036819 102488 None Item 8.39 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 157.44 157.44 333.7 False None None False None False 52537.728 0 3036820 102488 None Item 8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 L/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 193.39 193.39 801.52 False None None False None False 155005.9528 0 3036821 102488 None Item 8.34.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 61.98 61.98 11.16 False None None False None False 691.6968 0 3036822 102488 None Item 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 142.56 142.56 11.16 False None None False None False 1590.9696 0 3036823 102488 None Item 10.1.7 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 110mm dia., 6 kg/sqcm & class 3 ---- etc., complete with all lead m 509.52 509.52 180.0 False None None False None False 91713.6 0 3036824 102488 None Item 7.1.2 supports of same angle iron etc. as directed, including hand railing on both sides with 25mm dia. GI pipes with angle iron props at 2 mtrs. intervals and 0.5M heigh, including fixing in ground with CC 1:2:4 and two coats of anticorrosive bituminous paint etc. with all lead and lifts etc. complete with:: MS angle of 65 x 65 x 10mm ---- etc., complete with all lead m 5951.83 5951.83 13.2 False None None False None False 78564.156 0 1710321894000 0 None None Buildings Internal water supply & sanitary works 2656022.83 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3036825 102489 None Item 13.50.5 Providing and fixing Unplasticised Polyvinyl Chloride uPVC pipes, for cold water supply including all uPVC plain and brass threaded fittingsThis includes jointing of pipes and fittings with one step uPVC solventcement, trenching, refilling and testing of joints complete as per directionof Engineer in Charge. 40mm dia pipes, From wash basin waste lines ---- etc., complete with all lead m 369.48 369.48 40.0 False None None False None False 14779.2 0 3036826 102489 None Item 13.50.6 Providing and fixing Unplasticised Polyvinyl Chloride uPVC pipes, forcold water supply including all uPVC plain and brass threaded fittingsThis includes jointing of pipes and fittings with one step uPVC solventcement, trenching, refilling and testing of joints complete as per directionof Engineer in Charge. 50mm dia pipes, From sink and urinal waste lines ---- etc., complete with all lead m 469.14 469.14 10.0 False None None False None False 4691.4 0 3036827 102489 None Item 13.64.1 Providing and fixing Sewer SWR pipes, including all fittings, This includes jointing of pipes and fittings with one step solvent cement,trenching, refilling and testing of joints complete as per direction ofEngineer in Charge. Internal drainage 75mm nominal dia pipes ---- etc., complete with all lead m 351.25 351.25 65.0 False None None False None False 22831.25 0 3036828 102489 None Item 13.64.2 Providing and fixing Sewer SWR pipes, including all fittings, Thisincludes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Charge. Internal drainage 110mm nominal dia pipes ---- etc., complete with all lead m 467.92 467.92 53.0 False None None False None False 24799.76 0 3036829 102489 None Item 13.63 Providing and fixing PVC S.W.R Multi Floor Trap 10.0 cm X 7.5 cm X 5.0 cm X 4.0 cm with all fitting arrangements and all necessary accessoriescomplete ---- etc., complete with all lead Each 296.55 296.55 39.0 False None None False None False 11565.45 0 3036830 102489 None Item 13.37 Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc.with cement concrete 1:2:4 1 cement : 2 coarse sand : 4 graded stoneaggregate 20 mm nominal size, including finishing complete so as tomake it leak proof. ---- etc., complete with all lead Each 380.42 380.42 18.0 False None None False None False 6847.56 0 3036831 102489 None Item 14.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass of approved quality complete with 6 mm thick hrd board ground fixedto wooden cleats with C.P. brass screws and washers complete. ---- etc., complete with all lead Each 1482.78 1482.78 15.0 False None None False None False 22241.7 0 3036832 102489 None Item 13.9.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter ---- etc., complete with all lead Nos 339.11 339.11 10.0 False None None False None False 3391.1 0 3036833 102489 None Item 14.22B Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality and make as approved by Engineer in charge. ---- etc., complete with all lead Each 6760.05 6760.05 10.0 False None None False None False 67600.5 0 3036834 102489 None Item 14.40.2 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g ---- etc., complete with all lead Each 602.83 602.83 10.0 False None None False None False 6028.3 0 3036835 102489 None Item 14.38 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 g ---- etc., complete with all lead Each 176.23 176.23 10.0 False None None False None False 1762.3 0 3036836 102489 None Item 13.16 Providing and fixing C.P. brass angle valve for basin mixer and geyserpoints of approved quality conforming to IS:8931 ---- etc., complete with all lead Each 753.54 753.54 48.0 False None None False None False 36169.92 0 3036837 102489 None Item 14.2.1 Providing and fixing white vitreous china pedestal type water closetEuropean type W.C. pan with seat and lid, 10 litre low level white P.V.C.flushing cistern, including flush pipe, with manually controlled devicehandle lever, conforming to IS : 7231, with all fittings and fixturescomplete, including cutting and making good the walls and floors whereverrequired : W.C. pan with ISI marked white solid plastic seat and lid ---- etc., complete with all lead Each 5880.11 5880.11 31.0 False None None False None False 182283.41 0 3036838 102489 None Item 14.4.1 Providing and fixing white vitreous china flat back or wall corner typelipped front urinal basin of 430x260x350 mm and 340x410x265 mmsizes respectively with automatic flushing cistern with standard flushpipe and C.P. brass spreaders with brass unions and G.I clamps complete,including painting of fittings and brackets, cutting and making good thewalls and floors wherever required: One urinal basin with 5 litre white P.V.C. automatic flushing cistern ---- etc., complete with all lead Each 5413.39 5413.39 2.0 False None None False None False 10826.78 0 3036839 102489 None Item 13.15 Providing and fixing C.P. brass stop cock concealed of standard design and of approved make conforming to IS:8931. ---- etc., complete with all lead Nos 881.16 881.16 35.0 False None None False None False 30840.6 0 3036840 102489 None Item 14.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps ---- etc., complete with all lead Each 3746.21 3746.21 13.0 False None None False None False 48700.73 0 3036841 102489 None Item 14.22A Providing and fixing CP Brass 32mm size Bottle Trap of approved qualityand make and as per the direction of Engineer-in-charge. ---- etc., complete with all lead Each 984.47 984.47 28.0 False None None False None False 27565.16 0 3036842 102489 None Item 13.8.1.1 Providing and fixing unplasticised PVC connection pipe with brass unions :30 cm length 15 mm nominal bore ---- etc., complete with all lead Each 100.87 100.87 28.0 False None None False None False 2824.36 0 3036843 102489 None Item 14.37.1 Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270 mm, effectivelength of tail pipe 260 mm from the centre of the waste coupling, 77 mmbreadth with 25 mm minimum water seal, weighing not less than 260 g ---- etc., complete with all lead Each 371.91 371.91 28.0 False None None False None False 10413.48 0 3036844 102489 None Item 14.36.1 Providing and fixing PTMT Waste Coupling for wash basin and sink, ofapproved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 g ---- etc., complete with all lead Each 109.38 109.38 30.0 False None None False None False 3281.4 0 3036845 102489 None Item 13.2.1 Providing and fixing brass bib cock of approved quality 15 mm nominal bore ---- etc., complete with all lead Nos 347.6 347.6 46.0 False None None False None False 15989.6 0 3036846 102489 None Item 9.29 Providing and laying flooring and steps fine dressed granite stone slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed including cost of materials, mortar, labour, curing complete as per specifications. ---- etc., complete with all lead Sqm 5233.51 5233.51 18.0 False None None False None False 94203.18 0 3036847 102489 None Item 13.32.1 Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, iorc fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.15 mm nominal dia Pipes ---- etc., complete with all lead m 367.05 367.05 30.0 False None None False None False 11011.5 0 3036848 102489 None Item 13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, iorc fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.20 mm nominal dia Pipes ---- etc., complete with all lead m 460.63 460.63 38.0 False None None False None False 17503.94 0 3036849 102489 None Item 13.32.3 Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, iorc fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.25 mm nominal dia pipes ---- etc., complete with all lead m 579.74 579.74 186.0 False None None False None False 107831.64 0 3036850 102489 None Item 13.32.4 Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, iorc fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.32 mm nominal dia pipes ---- etc., complete with all lead m 676.97 676.97 45.0 False None None False None False 30463.65 0 3036851 102489 None Item 13.31.5 Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work Exposed on wall 40 mm nominal dia Pipes ---- etc., complete with all lead m 651.45 651.45 30.0 False None None False None False 19543.5 0 3036852 102489 None Item 13.31.6 Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work Exposed on wall 50 mm nominal dia Pipes ---- etc., complete with all lead m 949.22 949.22 20.0 False None None False None False 18984.4 0 3036853 102489 None Item 13.33.4 Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings This includes jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Charge. External work 32 mm nominal dia Pipes ---- etc., complete with all lead m 452.12 452.12 360.0 False None None False None False 162763.2 0 3036854 102489 None Item 13.33.5 Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings This includes jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Charge. External work 40 mm nominal dia Pipe ---- etc., complete with all lead m 579.74 579.74 210.0 False None None False None False 121745.4 0 3036855 102489 None Item 13.33.6 Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings This includes jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Charge. External work50 mm nominal dia Pipes ---- etc., complete with all lead m 876.3 876.3 215.0 False None None False None False 188404.5 0 3036856 102489 None Item 13.5.3 Providing and fixing ball valve brass of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore ---- etc., complete with all lead Nos 403.51 403.51 30.0 False None None False None False 12105.3 0 3036857 102489 None Item 13.4.4 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality screwed end :32 mm nominal bore ---- etc., complete with all lead Nos 726.81 726.81 15.0 False None None False None False 10902.15 0 3036858 102489 None Item 13.4.3 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality screwed end : 40 mm nominal bore ---- etc., complete with all lead Nos 853.21 853.21 10.0 False None None False None False 8532.1 0 3036859 102489 None Item 13.4.4 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality screwed end 50 mm nominal bore ---- etc., complete with all lead Nos 1039.16 1039.16 8.0 False None None False None False 8313.28 0 3036860 102489 None Item 13.4.5 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality screwed end 65 mm nominal bore ---- etc., complete with all lead Nos 1714.92 1714.92 8.0 False None None False None False 13719.36 0 3036861 102489 None Item 7.3.3 Supplying, installation, testing and commissioning of solar hot water heater comprising of solar Flat Plate Collector FPC of size2120x1040x100mm and stainless steel hot water storage tank withstainless steel heat exchanger absorber made of copper sheet andcopper tube of following capacity aluminium box collector withappropriate capacity electrical back up rrangement excluding inletand out let pipes. SS Model with 100mm thick of 48KgorM3density Rock wool insulation with 22SWG Aluminium cladding 300 L ---- etc., complete with all lead Each 85060.98 85060.98 4.0 False None None False None False 340243.92 0 3036862 102489 None Item 13.50.5 Providing and fixing Unplasticised Polyvinyl Chloride uPVC pipes, forcold water supply including all uPVC plain and brass threaded fittingsThis includes jointing of pipes and fittings with one step uPVC solventcement, trenching, refilling and testing of joints omplete as per directionof Engineer in Charge. External work 40mm dia pipes, From wash basin waste lines ---- etc., complete with all lead m 373.17 373.17 48.0 False None None False None False 17912.16 0 3036863 102489 None Item 13.50.6 Providing and fixing Unplasticised Polyvinyl Chloride uPVC pipes, forcold water supply including all uPVC plain and brass threaded fittingsThis includes jointing of pipes and fittings with one step uPVC solventcement, trenching, refilling and testing of joints omplete as per directionof Engineer in Charge. External work 50mm dia pipes, From sink and urinal waste lines ---- etc., complete with all lead m 473.84 473.84 15.0 False None None False None False 7107.6 0 3036864 102489 None Item 13.64.1 Providing and fixing Sewer SWR pipes, including all fittings, Thisincludes jointing of pipes and fittings with one step solvent cement,trenching, refilling and testing of joints complete as per direction ofEngineer in Charge. Internal drainage 75mm nominal dia pipes ---- etc., complete with all lead m 354.76 354.76 78.0 False None None False None False 27671.28 0 3036865 102489 None Item 13.64.2 Providing and fixing Sewer SWR pipes, including all fittings, Thisincludes jointing of pipes and fittings with one step solvent cement,trenching, refilling and testing of joints complete as per direction ofEngineer in Charge. Internal drainage 110mm nominal dia pipes ---- etc., complete with all lead m 472.61 472.61 58.0 False None None False None False 27411.38 0 3036866 102489 None Item 13.63 Providing and fixing PVC S.W.R Multi Floor Trap 10.0 cm X 7.5 cm X 5.0cm X 4.0 cm with all fitting arrangements and all necessary ccessoriescomplete ---- etc., complete with all lead Each 299.51 299.51 35.0 False None None False None False 10482.85 0 3036867 102489 None Item 13.37 Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc.with cement concrete 1:2:4 1 cement : 2 coarse sand : 4 graded stoneaggregate 20 mm nominal size, including finishing complete so as tomake it leak proof. ---- etc., complete with all lead Each 384.21 384.21 20.0 False None None False None False 7684.2 0 3036868 102489 None Item 14.31 Providing and fixing 600x450 mm beveled edge mirror of superior glassof approved quality complete with 6 mm thick hard board ground fixedto wooden cleats with C.P. brass screws and washers complete. ---- etc., complete with all lead Each 1497.62 1497.62 12.0 False None None False None False 17971.44 0 3036869 102489 None Item 13.9.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet 150 mm diameter ---- etc., complete with all lead Nos 342.48 342.48 8.0 False None None False None False 2739.84 0 3036870 102489 None Item 14.22B Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality and make as approved by Engineer in charge. ---- etc., complete with all lead Each 6827.65 6827.65 8.0 False None None False None False 54621.2 0 3036871 102489 None Item 14.40.2 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings rrangement of approved quality and colour 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g ---- etc., complete with all lead Each 608.86 608.86 8.0 False None None False None False 4870.88 0 3036872 102489 None Item 14.38 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 g ---- etc., complete with all lead Each 177.99 177.99 8.0 False None None False None False 1423.92 0 3036873 102489 None Item 13.16 Providing and fixing C.P. brass angle valve for basin mixer and geyserpoints of approved quality conforming to IS:8931 ---- etc., complete with all lead Each 761.08 761.08 28.0 False None None False None False 21310.24 0 3036874 102489 None Item 14.4.1 Providing and fixing white vitreous china flat back or wall corner typelipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flushpipe and C.P. brass spreaders with brass unions and G.I clamps complete,including painting of fittings and brackets, cutting and making good thewalls and floors wherever required: One urinal basin with 5 litre white P.V.C. automatic flushing cistern ---- etc., complete with all lead Each 5467.53 5467.53 2.0 False None None False None False 10935.06 0 3036875 102489 None Item 13.15 Providing and fixing C.P. brass stop cock concealed of standard design and of approved make conforming to IS:8931. ---- etc., complete with all lead Nos 889.97 889.97 40.0 False None None False None False 35598.8 0 3036876 102489 None Item 14.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps ---- etc., complete with all lead Each 3783.31 3783.31 14.0 False None None False None False 52966.34 0 3036877 102489 None Item 14.22A Providing and fixing CP Brass 32mm size Bottle Trap of approved qualityand make and as per the direction of Engineer-in-charge. ---- etc., complete with all lead Each 994.31 994.31 26.0 False None None False None False 25852.06 0 3036878 102489 None Item 13.8.1.1 Providing and fixing unplasticised PVC connection pipe with brass unions :30 cm length 15 mm nominal bore ---- etc., complete with all lead Each 101.88 101.88 28.0 False None None False None False 2852.64 0 3036879 102489 None Item 14.37.1 Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270 mm, effectivelength of tail pipe 260 mm from the centre of the waste coupling, 77 mmbreadth with 25 mm minimum water seal, weighing not less than 260 g ---- etc., complete with all lead Each 375.62 375.62 26.0 False None None False None False 9766.12 0 3036880 102489 None Item 13.28.1 Providing and fixing PTMT Waste Coupling for wash basin and sink, ofapproved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 g 15 mm nominal bore, weighing not less than 32 g ---- etc., complete with all lead Nos 78.56 78.56 28.0 False None None False None False 2199.68 0 3036881 102489 None Item 13.2.1 Providing and fixing brass bib cock of approved quality 15 mm nominal bore ---- etc., complete with all lead Nos 351.08 351.08 28.0 False None None False None False 9830.24 0 3036882 102489 None Item 9.29 Providing and laying flooring and steps fine dressed granite stone slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications. ---- etc., complete with all lead Sqm 5285.84 5285.84 15.0 False None None False None False 79287.6 0 3036883 102489 None Item 13.32.1 Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes,having thermal stability for hot and cold water supply, including all CPVCplain and brass threaded fittings, iorc fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes and fittings with one step CPVCsolvent cement and the cost of cutting chases and making good thesame including testing of joints complete as per direction of Engineer inCharge. Concealed work, including cutting chases and making good thewalls etc. 15 mm nominal dia Pipes ---- etc., complete with all lead m 370.72 370.72 38.0 False None None False None False 14087.36 0 3036884 102489 None Item 13.32.2 Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes,having thermal stability for hot and cold water supply, including all CPVCplain and brass threaded fittings, iorc fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes and fittings with one step CPVCsolvent cement and the cost of cutting chases and making good thesame including testing of joints complete as per direction of Engineer inCharge. Concealed work, including cutting chases and making good thewalls etc. 20 mm nominal dia Pipes ---- etc., complete with all lead m 465.23 465.23 40.0 False None None False None False 18609.2 0 3036885 102489 None Item 13.32.3 Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes,having thermal stability for hot and cold water supply, including all CPVCplain and brass threaded fittings, iorc fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes and fittings with one step CPVCsolvent cement and the cost of cutting chases and making good thesame including testing of joints complete as per direction of Engineer inCharge. Concealed work, including cutting chases and making good thewalls etc. 25 mm nominal dia pipes ---- etc., complete with all lead m 585.53 585.53 146.0 False None None False None False 85487.38 0 3036886 102489 None Item 13.32.4 Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes,having thermal stability for hot and old water supply, including all CPVC plain and brass threaded fittings, iorc fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes and fittings with one step CPVCsolvent cement and the cost of cutting chases and making good thesame including testing of joints complete as per direction of Engineer inCharge. Concealed work, including cutting chases and making good thewalls etc. 32 mm nominal dia pipes ---- etc., complete with all lead m 697.28 697.28 60.0 False None None False None False 41836.8 0 3036887 102489 None Item 13.31.5 Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes joiting of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall 40 mm nominal dia Pipes ---- etc., complete with all lead m 657.96 657.96 46.0 False None None False None False 30266.16 0 3036888 102489 None Item 13.31.6 Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall 50 mm nominal dia Pipes ---- etc., complete with all lead m 958.71 958.71 30.0 False None None False None False 28761.3 0 3036889 102489 None Item Data Rate Air Vent Cowel 75mm ---- etc., complete with all lead Nos 413.0 413.0 15.0 False None None False None False 6195.0 0 3036890 102489 None Item Data Rate Air Vent Cowel 110mm ---- etc., complete with all lead Nos 590.0 590.0 10.0 False None None False None False 5900.0 0 3036891 102489 None Item Data rate Supplying and fixing Counter basin consisting of size: 420 x 590 x 195, Shape: oval of ISI or BIS Standards with a single 15mm C.P. 32mm dia CP waste coupling, 32mmdia heavy duty CP bottle trap with extension pipe, CP wall flanges, 2 Nos.15mm dia C.P. angle cocks, 2nos.C.P. flexible inlet connection pipes, CI brackets etc., complete including silicon sealant filling. Jaguar make or Equalent ---- etc., complete with all lead Nos 9318.46 9318.46 22.0 False None None False None False 205006.12 0 3036892 102489 None Item Data Rate Supplying, fixing, testing and commissioning of CP health faucet Hand operated spray unit instant type CP Crutch etc., complete as directed by the Engineer in charge. ALD-577. Jaguar make or Equalent ---- etc., complete with all lead Nos 2183.0 2183.0 31.0 False None None False None False 67673.0 0 1710321894000 0 None None Buildings CCU Gadag - Internal Electrification. 16236952.14 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3036893 102490 None Item 2.2.1 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit orcasing capping casing capping using 2x1.5Sqmm Phase and Neutral and 1x1.0 sqmm Earth wire FRLS multi strand PVC insulated copper wire confirming to IS-694: and latest amendments without control switch shall be fixed on the existing plastic sheetor gang box, the other end of the wires shall be terminated with sufficient loose length in a woodorPVC round block. complete for each outlet. Short point up to 3Mtr from tapping point to out let via switch ---- etc., complete with all lead Each 326.94 326.94 15.0 False None None False None False 4904.1 0 3036894 102490 None Item 2.2.2 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit orcasing capping casing capping using 2x1.5Sqmm Phase and Neutral and 1x1.0 sqmm Earth wire FRLS multi strand PVC insulated copper wire confirming to IS-694: and latest amendments without control switch shall be fixed on the existing plastic sheetor gang box, the other end of the wires shall be terminated with sufficient loose length in a woodorPVC round block. complete for eacoutlet Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch ---- etc., complete with all lead Each 460.63 460.63 143.0 False None None False None False 65870.09 0 3036895 102490 None Item 2.2.3 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit orcasing capping casing capping using 2x1.5Sqmm Phase and Neutral and 1x1.0 sqmm Earth wire FRLS multi strand PVC insulated copper wire confirming to IS-694: and latest amendments without control switch shall be fixed on the existing plastic sheetor gang box, the other end of the wires shall be terminated with sufficient loose length in a woodorPVC round block. complete for each outlet. Long point above 6Mtr up to 10Mtr from tapping point to out let via switch ---- etc., complete with all lead Each 674.54 674.54 159.0 False None None False None False 107251.86 0 3036896 102490 None Item 2.2.4 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit orcasing capping casing capping using 2x1.5Sqmm Phase and Neutral and 1x1.0 sqmm Earth wire FRLS multi strand PVC insulated copper wire confirming to IS-694: and latest amendments without control switch shall be fixed on the existing plastic sheetor gang box, the other end of the wires shall be terminated with sufficient loose length in a woodorPVC round block. complete for each outlet. Two outlet in a row, above 3Mtr up to 6Mtr from tapping point to out let via switches ---- etc., complete with all lead Each 822.82 822.82 66.0 False None None False None False 54306.12 0 3036897 102490 None Item 2.2.5 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit orcasing capping casing capping using 2x1.5Sqmm Phase and Neutral and 1x1.0 sqmm Earth wire FRLS multi strand PVC insulated copper wire confirming to IS-694: and latest amendments without control switch shall be fixed on the existing plastic sheetor gang box, the other end of the wires shall be terminated with sufficient loose length in a woodorPVC round block. complete for each outlet.Three outlet in a row, above 6Mts up to 10Mtr from tapping point to out let via switches ---- etc., complete with all lead Each 1202.03 1202.03 100.0 False None None False None False 120203.0 0 3036898 102490 None Item 3.4.1 Supplying and flush mounting powder coated or galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickorStoneorC.C wall 1-2Way ---- etc., complete with all lead Each 167.72 167.72 100.0 False None None False None False 16772.0 0 3036899 102490 None Item 3.4.2 Supplying and flush mounting powder coated or galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickorStoneorC.C wall 3Way ---- etc., complete with all lead Each 193.24 193.24 400.0 False None None False None False 77296.0 0 3036900 102490 None Item 3.4.3 Supplying and flush mounting powder coated or galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickorStoneorC.C wall 4-5Way ---- etc., complete with all lead Each 215.12 215.12 55.0 False None None False None False 11831.6 0 3036901 102490 None Item 3.4.4 Supplying and flush mounting powder coated or galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickorStoneorC.C wall 6Way ---- etc., complete with all lead Each 267.38 267.38 38.0 False None None False None False 10160.44 0 3036902 102490 None Item 3.4.5 Supplying and flush mounting powder coated or galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickorStoneorC.C wall 8 Way ---- etc., complete with all lead Each 317.21 317.21 70.0 False None None False None False 22204.7 0 3036903 102490 None Item 3.4.6 Supplying and flush mounting powder coated or galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickorStoneorC.C wall 10-12Way ---- etc., complete with all lead Each 387.71 387.71 30.0 False None None False None False 11631.3 0 3036904 102490 None Item 3.5.1 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metalorPVC box. 1 to 2 Module ---- etc., complete with all lead Each 166.5 166.5 100.0 False None None False None False 16650.0 0 3036905 102490 None Item 3.5.2 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metalorPVC box. 3 Module ---- etc., complete with all lead Each 195.67 195.67 400.0 False None None False None False 78268.0 0 3036906 102490 None Item 3.5.3 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metalorPVC box. 4 Module ---- etc., complete with all lead Each 212.69 212.69 55.0 False None None False None False 11697.95 0 3036907 102490 None Item 3.5.4 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metalorPVC box. 6 Module ---- etc., complete with all lead Each 284.4 284.4 38.0 False None None False None False 10807.2 0 3036908 102490 None Item 3.5.5 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metalorPVC box. 8 Module ---- etc., complete with all lead Each 345.17 345.17 70.0 False None None False None False 24161.9 0 3036909 102490 None Item 3.5.6 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metalorPVC box. 10-12 Module ---- etc., complete with all lead Each 418.09 418.09 30.0 False None None False None False 12542.7 0 3036910 102490 None Item 3.6.1 Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch ---- etc., complete with all lead Each 123.97 123.97 504.0 False None None False None False 62480.88 0 3036911 102490 None Item 3.6.2 Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Two way Switch ---- etc., complete with all lead Each 201.75 201.75 10.0 False None None False None False 2017.5 0 3036912 102490 None Item 3.6.3 Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket ---- etc., complete with all lead Each 207.83 207.83 605.0 False None None False None False 125737.15 0 3036913 102490 None Item 3.6.4 Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator. ---- etc., complete with all lead Each 433.89 433.89 63.0 False None None False None False 27335.07 0 3036914 102490 None Item 3.6.9 Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch ---- etc., complete with all lead Each 396.22 396.22 10.0 False None None False None False 3962.2 0 3036915 102490 None Item 3.6.10 Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6or16Amps universal socket ---- etc., complete with all lead Each 286.83 286.83 532.0 False None None False None False 152593.56 0 3036916 102490 None Item 3.6.7 Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16Amps one way switch ---- etc., complete with all lead Each 218.77 218.77 605.0 False None None False None False 132355.85 0 3036917 102490 None Item 1.13 Supplyin and Fixing Metal Fan Box with Round Hook. ---- etc., complete with all lead Nos 142.2 142.2 63.0 False None None False None False 8958.6 0 3036918 102490 None Item 5.45.2 Supplying and fixing of Metal Socket set of 2pole and earth plugs and socket for incorporating SP and TP MCB Without MCB.The entire plug and socket shall be mounted in a thermoplastic I powder coated metal box and wired Completely. SP and N 20Amps ---- etc., complete with all lead Each 1180.15 1180.15 4.0 False None None False None False 4720.6 0 3036919 102490 None Item 5.45.4 Supplying and fixing of Metal Socket set of 2pole and earth plugs and socket for incorporating SP and TP MCB Without MCB.The entire plug and socket shall be mounted in a thermoplastic I powder coated metal box and wired Completely. TP and N 30Amps ---- etc., complete with all lead Each 2066.18 2066.18 4.0 False None None False None False 8264.72 0 3036920 102490 None Item 1.2.1 Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metalorPVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary. 19or20mm dia 2mm thick ---- etc., complete with all lead m 80.21 80.21 189.0 False None None False None False 15159.69 0 3036921 102490 None Item 1.2.2 Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metalorPVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary. 25mm dia 2mm thick ---- etc., complete with all lead m 94.8 94.8 7850.0 False None None False None False 744180.0 0 3036922 102490 None Item 1.2.3 Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metalorPVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary. 32mm dia 2.5mm thick ---- etc., complete with all lead m 125.18 125.18 1870.0 False None None False None False 234086.6 0 3036923 102490 None Item 1.3.1 Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metalorPVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 19or20mm dia 2mm thick ---- etc., complete with all lead m 82.64 82.64 110.0 False None None False None False 9090.4 0 3036924 102490 None Item 1.3.2 Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metalorPVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 25mm dia 2mm thick ---- etc., complete with all lead m 96.01 96.01 2500.0 False None None False None False 240025.0 0 3036925 102490 None Item 1.3.3 Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metalorPVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary. 32mm dia 2.5mm thick ---- etc., complete with all lead m 120.32 120.32 2350.0 False None None False None False 282752.0 0 3036926 102490 None Item 1.4.7 Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cableorconduit entry as required with one coat of primer of approved make etc.200 x 200 x 65 mm ---- etc., complete with all lead Each 422.95 422.95 40.0 False None None False None False 16918.0 0 3036927 102490 None Item 1.7.1 Extra for Groove cutting in brick wallorCC floor to the suitable depth for concealing of ConduitorGI pipe and plastering, finishing upto wall surface complete.upto 50mm conduit in brick wall ---- etc., complete with all lead m 35.24 35.24 100.0 False None None False None False 3524.0 0 3036928 102490 None Item 1.7.2 Extra for Groove cutting in brick wallorCC floor to the suitable depth for concealing of ConduitorGI pipe and plastering, finishing upto wall surface complete.upto 50 mm conduit CC floor ---- etc., complete with all lead m 83.86 83.86 100.0 False None None False None False 8386.0 0 3036929 102490 None Item 1.5.2 Supplying and fixing PVCormetal conduit Deep junction box 25 mm deep Junction box ---- etc., complete with all lead Each 68.06 68.06 645.0 False None None False None False 43898.7 0 3036930 102490 None Item 1.5.3 Supplying and fixing PVCormetal conduit Deep junction box 32 mm deep Junction box ---- etc., complete with all lead Each 74.13 74.13 60.0 False None None False None False 4447.8 0 3036931 102490 None Item 1.10.1 Supplying PVCorGI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF screws and on either end of thepi pe terminated completely 20mm ---- etc., complete with all lead m 64.41 64.41 450.0 False None None False None False 28984.5 0 3036932 102490 None Item 1.10.2 Supplying PVCorGI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF screws and on either end of thepi pe terminated completely 25mm ---- etc., complete with all lead m 87.5 87.5 623.0 False None None False None False 54512.5 0 3036933 102490 None Item 1.10.3 Supplying PVCorGI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF screws and on either end of thepi pe terminated completely 32mm ---- etc., complete with all lead m 99.66 99.66 250.0 False None None False None False 24915.0 0 3036934 102490 None Item 1.10.5 Supplying PVCorGI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF screws and on either end of thepi pe terminated completely 50mm ---- etc., complete with all lead m 150.7 150.7 200.0 False None None False None False 30140.0 0 3036935 102490 None Item 2.5.19 Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and Virgin PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990 -4C x 6 mm2 ---- etc., complete with all lead m 398.65 398.65 1350.0 False None None False None False 538177.5 0 3036936 102490 None Item 2.3.2 Wiring for lightingorpower circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 1.5 sqmm ---- etc., complete with all lead m 31.6 31.6 7500.0 False None None False None False 237000.0 0 3036937 102490 None Item 2.3.3 Wiring for lightingorpower circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 2.5 sqmm ---- etc., complete with all lead m 51.04 51.04 11010.0 False None None False None False 561950.4 0 3036938 102490 None Item 2.3.4 Wiring for lightingorpower circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 4 sqmm ---- etc., complete with all lead m 76.57 76.57 16374.0 False None None False None False 1253757.18 0 3036939 102490 None Item 2.3.5 Wiring for lightingorpower circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 6 sqmm ---- etc., complete with all lead m 111.81 111.81 250.0 False None None False None False 27952.5 0 3036940 102490 None Item 5.19.12 Supplying and fixing regular MCB distribution boards on wallor wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure III - Double Door 6 Way TP and N ---- etc., complete with all lead Each 6004.07 6004.07 4.0 False None None False None False 24016.28 0 3036941 102490 None Item 5.19.13 Supplying and fixing regular MCB distribution boards on wallor wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3phase I single door with powder coated painting. Made out of 14 SWG MS enclosure III - Double Door 8 Way TP and N ---- etc., complete with all lead Each 7403.0 7403.0 2.0 False None None False None False 14806.0 0 3036942 102490 None Item 5.19.14 Supplying and fixing regular MCB distribution boards on wallor wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure III - Double Door 12 Way TP and N ---- etc., complete with all lead Each 10616.51 10616.51 6.0 False None None False None False 63699.06 0 3036943 102490 None Item 5.19.9 Supplying and fixing regular MCB distribution boards on wallor wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I 3 phase I single door with powder coated painting. Made out of 14 SWG MS enclosure III - Double Door 12 Way SP and N ---- etc., complete with all lead Each 2830.66 2830.66 2.0 False None None False None False 5661.32 0 3036944 102490 None Item 5.18.1 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ONorOFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32Amps SP ---- etc., complete with all lead Each 504.39 504.39 138.0 False None None False None False 69605.82 0 3036945 102490 None Item 5.18.4 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ONorOFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32 Amps DP ---- etc., complete with all lead Each 898.18 898.18 10.0 False None None False None False 8981.8 0 3036946 102490 None Item 5.18.5 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ONorOFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 40 Amps DP ---- etc., complete with all lead Each 1288.32 1288.32 6.0 False None None False None False 7729.92 0 3036947 102490 None Item 5.18.9 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ONorOFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 50-63Amps TPN ---- etc., complete with all lead Each 3753.15 3753.15 20.0 False None None False None False 75063.0 0 3036948 102490 None Item 5.20.1 Supplying, fixing and wiring Residual current Circuit Breaker [RCCB] 240or450V up to 300mA sensitivity on existing woodorpanel board 16-25 Amps 2 pole ---- etc., complete with all lead Each 5198.26 5198.26 7.0 False None None False None False 36387.82 0 3036949 102490 None Item 5.20.5 Supplying, fixing and wiring Residual current Circuit Breaker [RCCB] 240or450V up to 300mA sensitivity on existing woodorpanel board 63 Amps 2 pole ---- etc., complete with all lead Each 6390.57 6390.57 9.0 False None None False None False 57515.13 0 3036950 102490 None Item 5.20.10 Supplying, fixing and wiring Residual current Circuit Breaker [RCCB] 240or450V up to 300mA sensitivity on existing woodorpanel board 63 Amps 4 pole ---- etc., complete with all lead Each 6739.39 6739.39 16.0 False None None False None False 107830.24 0 3036951 102490 None Item 32.08 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 Part 1 or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 4 core 25 sqmm ---- etc., complete with all lead Km 218582.39 218582.39 0.3 False None None False None False 65574.717 0 3036952 102490 None Item 5.46.1 Supplying and fixing of Modular MCB Devices Tripper With Breaking capacity of 6kA. 16-32A SP ---- etc., complete with all lead Each 255.23 255.23 4.0 False None None False None False 1020.92 0 3036953 102490 None Item 5.46.4 Supplying and fixing of Modular MCB Devices Tripper With Breaking capacity of 6kA. 16-32A SP ---- etc., complete with all lead Each 974.75 974.75 4.0 False None None False None False 3899.0 0 3036954 102490 None Item 32.15 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 Part 1 or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 3.5 core 120 sqmm ---- etc., complete with all lead Km 555302.89 555302.89 0.2 False None None False None False 111060.578 0 3036955 102490 None Item 32.18 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 Part 1 or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 3.5 core 240 sqmm ---- etc., complete with all lead Km 1048484.25 1048484.25 0.2 False None None False None False 209696.85 0 3036956 102490 None Item 32.19 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 Part 1 or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 3.5 core 300 sqmm ---- etc., complete with all lead Km 1295633.41 1295633.41 0.2 False None None False None False 259126.682 0 3036957 102490 None Item 32.20 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 Part 1 or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 3.5 core 400 sqmm ---- etc., complete with all lead Km 1766546.22 1766546.22 0.4 False None None False None False 706618.488 0 3036958 102490 None Item 21.05 Laying of cable in Existing TrenchorGI pipeorStone WareorRCC Hume pipe using WoodenorAluminum Rollers as directed by the departmental staff 2.5 sqmm to 25 sqmm ---- etc., complete with all lead Km 25384.84 25384.84 0.3 False None None False None False 7615.452 0 3036959 102490 None Item 21.06 Laying of cable in Existing TrenchorGI pipeorStone WareorRCC Hume pipe using WoodenorAluminum Rollers as directed by the departmental staff 35 sqmm to 95 sqmm ---- etc., complete with all lead Km 37846.34 37846.34 0.3 False None None False None False 11353.902 0 3036960 102490 None Item 21.07 Laying of cable in Existing TrenchorGI pipeorStone WareorRCC Hume pipe using WoodenorAluminum Rollers as directed by the departmental staff 120 sqmm to 240 sqmm ---- etc., complete with all lead Km 39230.68 39230.68 0.2 False None None False None False 7846.136 0 3036961 102490 None Item 21.08 Laying of cable in Existing TrenchorGI pipeorStone WareorRCC Hume pipe using WoodenorAluminum Rollers as directed by the departmental staff 300 sqmm to 400 sqmm ---- etc., complete with all lead Km 41537.51 41537.51 0.6 False None None False None False 24922.506 0 3036962 102490 None Item 6.9 Supplying and fixing of class A medium duty GI pipe of wall thick ness not less than 3.25mm on poleorwallordrain crossing with necessary clamping arrangements for UG cable of 1.1 KV class. ---- etc., complete with all lead m 687.91 687.91 30.0 False None None False None False 20637.3 0 3036963 102490 None Item 6.11.3 Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class metal only 32mm dia ---- etc., complete with all lead Each 142.2 142.2 20.0 False None None False None False 2844.0 0 3036964 102490 None Item 6.11.6 Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class metal only 63mm dia ---- etc., complete with all lead Each 471.57 471.57 25.0 False None None False None False 11789.25 0 3036965 102490 None Item 6.17.5 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 10 sqmm ---- etc., complete with all lead Each 9.72 9.72 160.0 False None None False None False 1555.2 0 3036966 102490 None Item 6.17.6 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 16 sqmm ---- etc., complete with all lead Each 15.12 15.12 80.0 False None None False None False 1209.6 0 3036967 102490 None Item 6.17.12 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 120 sqmm Long Barrel ---- etc., complete with all lead Each 230.92 230.92 20.0 False None None False None False 4618.4 0 3036968 102490 None Item 6.17.15 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 240 sqmm Long Barrel ---- etc., complete with all lead Each 562.73 562.73 40.0 False None None False None False 22509.2 0 3036969 102490 None Item 6.17.17 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 400 sqmm Long Barrel ---- etc., complete with all lead Each 1150.98 1150.98 4.0 False None None False None False 4603.92 0 3036970 102490 None Item 12.57 Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode.The funnel should be enclosed in a CC chamber of 400x400x400 mm with a cast iron cover. The earth electrode shall have staggered holes of 12 mm dia and the electrode should be covered 150 mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts. ---- etc., complete with all lead Nos 5172.74 5172.74 20.0 False None None False None False 103454.8 0 3036971 102490 None Item 12.58.2 Supplying and running of GIorCopper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip ---- etc., complete with all lead m 99.66 99.66 200.0 False None None False None False 19932.0 0 3036972 102490 None Item 12.58.3 Supplying and running of GIorCopper strips for grounding connections, using necessary fixing materials as required. 25x6mm GI strip ---- etc., complete with all lead m 155.57 155.57 150.0 False None None False None False 23335.5 0 3036973 102490 None Item 12.58.6 Supplying and running of GIorCopper strips for grounding connections, using necessary fixing materials as required. 600x600x3mm GI Plate. ---- etc., complete with all lead Each 1063.47 1063.47 10.0 False None None False None False 10634.7 0 3036974 102490 None Item 12.58.7 Supplying and running of GIorCopper strips for grounding connections, using necessary fixing materials as required. 25x3mm Copper strip ---- etc., complete with all lead m 692.77 692.77 120.0 False None None False None False 83132.4 0 3036975 102490 None Item 12.58.8 Supplying and running of GIorCopper strips for grounding connections, using necessary fixing materials as required. strip 25x6mm Copper strip ---- etc., complete with all lead m 1336.93 1336.93 100.0 False None None False None False 133693.0 0 3036976 102490 None Item 12.58.11 Supplying and running of GIorCopper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip 600x600x3mm Copper plate ---- etc., complete with all lead Each 9019.48 9019.48 10.0 False None None False None False 90194.8 0 3036977 102490 None Item 11.4.2 Supplying of recess mounting non integrated type LED down light W luminaire comprising of pressure decastor extruded aluminium housing, with spring loaded false ceiling clamps, LED of PowerorCOB with CCT 6500 degree K, CRI70. efficacy 100 lumen per W, 120degree beam spread, life 25000 burning hours and Compliance to IS10322orIEC 60598, LM 79 and LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LED's are driven by HF electronic driver integrated in a separate control gear assembly., with PF 0.95, power loss should5 of lamp Wage, short circuit and open circuit protection to be integrated in the circuit, THD less than 20, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABLorCPRI accredited laboratory with 2 years Warranty against any manufacturing defect working understandard electrical condition. 1012W ---- etc., complete with all lead Each 1542.34 1542.34 20.0 False None None False None False 30846.8 0 3036978 102490 None Item 11.4.3 Supplying of recess mounting non integrated type LED down light W luminaire comprising of pressure decastor extruded aluminium housing, with spring loaded false ceiling clamps, LED of PowerorCOB with CCT 6500 degree K, CRI 70. efficacy 100 lumen per W, 120degree beam spread, life25000 burning hours and Compliance to IS10322orIEC 60598, LM 79 and LM 80. The lamp compart ment is enclosed with anti glare opal diffuser which enhances the lighting level. LED's are driven by HF electronic driver integrated in a separate control gear assembly., with PF 0.95, power loss should 5% of lamp Wage, short circuit and open circuit protection to be integrated in the circuit, THD less than 20, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABLorCPRI accredited laboratory with 2 years Warranty against any manufacturing defect working understandard electrical condition. 1518W ---- etc., complete with all lead Each 2030.93 2030.93 262.0 False None None False None False 532103.66 0 3036979 102490 None Item 11.3.1 Supplying of eet PVC Batten with integrated LED tubeW with high quality diffuser with Life of 25000 burning hours and 70 lumen maintenance with CRI 80. Power Input: 220240V at 50or60Hz and Power factor0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fighting 1 x2'- 9or10 w ---- etc., complete with all lead Each 669.68 669.68 50.0 False None None False None False 33484.0 0 3036980 102490 None Item 11.3.2 Supplying of feet PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours and 70% lumen maintenance with CRI 80. Power Input: 22040V at 50or60Hz and Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fighting 1 x4'- 20or22 w ---- etc., complete with all lead Each 838.62 838.62 150.0 False None None False None False 125793.0 0 3036981 102490 None Item 11.11.3 Supplying and fixing of retrofit type LED bulbW with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per watt, life25000 burning hours and Compliance to IS 10322orIEC 60598, LM 79 and LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp wattage., short circuit and open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABLorCPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 7 W, 6500K ---- etc., complete with all lead Each 181.09 181.09 5.0 False None None False None False 905.45 0 3036982 102490 None Item 11.11.5 Supplying and fixing of retrofit type - LED bulbW with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI70%. efficacy 80 lumen per watt, life 25000 burning hours and Compliance to IS 10322orIEC 60598, LM 79 and LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp wattage., short circuit and open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABLorCPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 12 W, 6500K ---- etc., complete with all lead Each 326.94 326.94 5.0 False None None False None False 1634.7 0 3036983 102490 None Item 11.6.3 Supplying of recess mounting nonintegral type LED W luminaire comprising of pressure decastorextruded aluminium housing, with spring loaded fase ceiling clamps, Power LEDs with CCT 6500 degree K, CRI 70. efficacy 100 lumen per watt, 120degree beam spread, life 25000 burning hours and Compliance to IS 10322orIEC 60598, LM 79 and LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF 0.95, power loss should 5% of lamp wattage., short circuit and open circuit protection to be integrated in the circuit, , THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABLor CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.LED modular down light 2'x2' 36watt ---- etc., complete with all lead Each 5533.71 5533.71 110.0 False None None False None False 608708.1 0 3036984 102490 None Item 11.8.3 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr at Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP 66 optical and electrical compartment and impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge ProtectionMin 5KV along with Over voltageor Overload, short circuitor misswiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50or60Hz application. Compliance to IS 10322orIEC 60598, LM 79 and LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with W System Power consumption. LED Efficiency130lmorw, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABLorCPRI and any Government certified agency and Design and Development facility certified by ISO 9001:2008 . Housing with supplier word mark orname shall be Engraved or Embossing on the die cast housingor Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer and CreeorNichiaor LumiledsorOsram make LED Source. LED Streetlight 70watts ---- etc., complete with all lead Nos 7282.67 7282.67 20.0 False None None False None False 145653.4 0 3036985 102490 None Item 6.1 Supplying exhaust fan of 1440 RPM of 300mm 12" size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. ---- etc., complete with all lead Each 1813.37 1813.37 30.0 False None None False None False 54401.1 0 3036986 102490 None Item 6.2.1 Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. 12" Sweep 300mm ---- etc., complete with all lead Each 3608.52 3608.52 3.0 False None None False None False 10825.56 0 3036987 102490 None Item 6.3.1 Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearingsystem. 48" Sweep 1200 mm Regular model ---- etc., complete with all lead Each 3626.75 3626.75 63.0 False None None False None False 228485.25 0 3036988 102490 None Item 6.4.1 Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374or19 and also comply with IS: 1709or1984 with latest amendment, Rated voltage 220 Vor50 Hz, Rated power upto 35 W or 10 %, Rated current As per IS:374or19, Rated power factor 0.9 laggingmin, Rated speed 350 or 10% RPM, Rated air delivery 210 or 10% Cubic Meter Minimum, Rated service value 6.2 CMM or W, Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201, as per IS specification, Motor winding. Temp rise Shall not exceed 75 deg C over and ambient of 40 0C by resistance method at 245 V, Insulation resistance Shall not be less than Two Mega Ohms 2M Ohms, Leakage current Should not exceed 210 Micro Amp, Power input, Wand current, Air Delivery and Fan Speed as per IS:374or2019 with latest amendment, 2year manufacturer Warranty. BLDC fans 48" Sweep 5 Star 1200 mm ---- etc., complete with all lead Each 3253.62 3253.62 63.0 False None None False None False 204978.06 0 3036989 102490 None Item 12.46 Supplying and Fixing of 70-150 Watts lamp holder 2 Pin ---- etc., complete with all lead Each 76.57 76.57 20.0 False None None False None False 1531.4 0 3036990 102490 None Item 13.7.1 Fixing all types and all capacities of fluorescent or false ceiling or spot light or CFL or LED fittings indoor on the wall or ceiling or rafters or girders using 23or0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall or ceiling or Rafter or Girders ---- etc., complete with all lead Each 148.27 148.27 472.0 False None None False None False 69983.44 0 3036991 102490 None Item 13.11 Fixing a ceiling or wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary length of 23 or 0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired. ---- etc., complete with all lead Each 382.85 382.85 63.0 False None None False None False 24119.55 0 3036992 102490 None Item 13.13 Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 or 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. ---- etc., complete with all lead Each 859.28 859.28 33.0 False None None False None False 28356.24 0 3036993 102490 None Item 13.19 Fixing all types and all capacities of 1'x4' or 2'x2' LED Light fittings indoor on the wall or ceiling or rafters or girders with necessary supporting frame, using 2310.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamps. ---- etc., complete with all lead Each 595.54 595.54 110.0 False None None False None False 65509.4 0 3036994 102490 None Item 13.4.1 Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4” dia telescopic M. S. pipe, with 2” dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M. S. sheet, grip bolts and nuts, as required, suitable for 9 to 12 Mtrs. M. S. tubular pole, with necessary two coats of painting, with all other accessories. Single bracket 1.5 Mtr. Length ---- etc., complete with all lead Each 1775.69 1775.69 10.0 False None None False None False 17756.9 0 3036995 102490 None Item 13.2.2 Supplying and Fixing........mm dia clampsss A GI pipe bracket upto 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MVorSVorMHorFTL street light fitting of all capacities on railorRCCorwallortubular pole, using suitable clamps, bolts, nuts and wiring using suitable capacity wires.Using 32mm dia G.I.Pipe ---- etc., complete with all lead Each 1573.94 1573.94 20.0 False None None False None False 31478.8 0 3036996 102490 None Item 13.5 Fixing halogenormetal halide or SVL or IL or LED floodlight fitting over existing pole or wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. ---- etc., complete with all lead Each 196.89 196.89 20.0 False None None False None False 3937.8 0 3036997 102490 None Item 5.42.1 Fabricating supplying and mounting MS box made out ...SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete 14SWG ---- etc., complete with all lead Sq CM 0.6 0.6 450000.0 False None None False None False 270000.0 0 3036998 102490 None Item 5.40.5 Supplying .........amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRPorDMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 1000 A double run of 4 x 60 x 10 mm Aluminium Strips ---- etc., complete with all lead m 12858.93 12858.93 8.0 False None None False None False 102871.44 0 3036999 102490 None Item 5.41.2 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 50x50x6mm ---- etc., complete with all lead m 480.08 480.08 16.0 False None None False None False 7681.28 0 3037000 102490 None Item 5.41.3 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 75x75x6mm ---- etc., complete with all lead m 674.54 674.54 6.0 False None None False None False 4047.24 0 3037001 102490 None Item 5.41.4 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 50x100x50x6mm C Channel ---- etc., complete with all lead m 918.84 918.84 73.0 False None None False None False 67075.32 0 3037002 102490 None Item 5.41.5 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 75x150x75x6mm C channel ---- etc., complete with all lead m 1125.46 1125.46 6.0 False None None False None False 6752.76 0 3037003 102490 None Item 5.15.9 Supplying and fixing Moulded Case Circuit Breaker MCCB over the existing woodorpanel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. Icu=100% lcs. In 4P MCCB, all Poles should have protection for Short-CicrcuitorOver Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open. Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. FOUR POLE100Amps 25kA ---- etc., complete with all lead Each 10315.09 10315.09 25.0 False None None False None False 257877.25 0 3037004 102490 None Item 5.15.13 Supplying and fixing Moulded Case Circuit Breaker MCCB over the existing woodorpanel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. Icu=100% lcs. In 4P MCCB, all Poles should have protection for Short-CicrcuitorOver Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open. Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. FOUR POLE 250Amps 35kA ---- etc., complete with all lead Each 25998.62 25998.62 8.0 False None None False None False 207988.96 0 3037005 102490 None Item 5.15.20 Supplying and fixing Moulded Case Circuit Breaker MCCB over the existing woodorpanel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Therm IS-13947. Icu=100% lcs. In 4P MCCB, all Poles should have protection for Short-CicrcuitorOver Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open. Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.FOUR POLE700-800Amps 50kA ---- etc., complete with all lead Each 60648.46 60648.46 3.0 False None None False None False 181945.38 0 3037006 102490 None Item 5.18 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ONorOFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 50-63A TPN ---- etc., complete with all lead Each 3753.15 3753.15 7.0 False None None False None False 26272.05 0 3037007 102490 None Item 5.33 Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy ---- etc., complete with all lead Each 11321.45 11321.45 11.0 False None None False None False 124535.95 0 3037008 102490 None Item 5.38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12or24v D.C ---- etc., complete with all lead Each 625.93 625.93 36.0 False None None False None False 22533.48 0 3037009 102490 None Item 5.34 Supplying, fixing and wiring 50or5 to 400or5Amps 15VA burden Current Transformer. Class 0.5 accuracy with Tape Wound ---- etc., complete with all lead Each 683.05 683.05 36.0 False None None False None False 24589.8 0 3037010 102490 None Item 5.12.8 Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. With all accessories. SM Enclosure Sheet Metal Execution 800A ---- etc., complete with all lead Each 70696.17 70696.17 1.0 False None None False None False 70696.17 0 3037011 102490 None Item 5.21 Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage current, programmable delayorautoor manual reset facility suitable to mount on DIN railor flush mounting on panel board. ---- etc., complete with all lead Each 11248.52 11248.52 3.0 False None None False None False 33745.56 0 3037012 102490 None Item 5.16 Suppiying and fixing of Shunt trip suitable for MCCB.CBCT ---- etc., complete with all lead Each 2069.82 2069.82 2.0 False None None False None False 4139.64 0 3037013 102490 None Item 5.42.2 Fabricating supplying and mounting MS box made out ...SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete 16SWG ---- etc., complete with all lead Sq CM 0.52 0.52 1345000.0 False None None False None False 699400.0 0 3037014 102490 None Item 5.40.2 Supplying .........amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRPorDMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 250Amps 4x30x10mm Aluminum Strips ---- etc., complete with all lead m 4174.89 4174.89 15.5 False None None False None False 64710.795 0 3037015 102490 None Item 5.18.7 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ONorOFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32Amps TPN ---- etc., complete with all lead Each 2086.84 2086.84 3.0 False None None False None False 6260.52 0 3037016 102490 None Item 5.18.8 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ONorOFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 40Amps TPN ---- etc., complete with all lead Each 3699.67 3699.67 11.0 False None None False None False 40696.37 0 3037017 102490 None Item 5.18.1 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ONorOFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32Amps SP ---- etc., complete with all lead Each 504.39 504.39 18.0 False None None False None False 9079.02 0 3037018 102490 None Item 5.39 Supplying, fixing and wiring Automatic Power Factor controller fully, static units controlled by 14 stage microprocessor operation, relays LED display, self programming function for power stages and operating logic checking facility for healthy and efficient of each individual capacitor bank, measurement of network harmonics with indication when limit values are exceeded, Comprehensive displays with large, three place LED display, Long term memory for settings, protection for over voltage, power factor correction fault and no voltage, to connect I disconnect banks, with automatic recognition or with standard programs. ---- etc., complete with all lead Each 26301.25 26301.25 1.0 False None None False None False 26301.25 0 3037019 102490 None Item 5.37 Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400or440 volts grade, for power factor improvement of rotating machinery ---- etc., complete with all lead Nos 583.39 583.39 100.0 False None None False None False 58339.0 0 3037020 102490 None Item 5.13.1 Supply and fixing of 4pole power contactor with NOorNC contacts on existing woodorpanel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 25 Amps ---- etc., complete with all lead Each 1567.86 1567.86 2.0 False None None False None False 3135.72 0 3037021 102490 None Item 5.13.2 Supply and fixing of 4pole power contactor with NOorNC contacts on existing woodorpanel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 40 Amps ---- etc., complete with all lead Each 2744.37 2744.37 6.0 False None None False None False 16466.22 0 3037022 102490 None Item 5.41.1 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 40x40x6mm ---- etc., complete with all lead m 370.69 370.69 65.0 False None None False None False 24094.85 0 3037023 102490 None Item 5.18.9 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ONorOFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 50-63Amps TPN ---- etc., complete with all lead Each 3753.15 3753.15 17.0 False None None False None False 63803.55 0 3037024 102490 None Item 5.40.3 Supplying amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRPorDMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 250Amps 4x30x10mm Aluminum Strips ---- etc., complete with all lead m 5402.45 5402.45 20.0 False None None False None False 108049.0 0 3037025 102490 None Item 5.15.11 Supplying and fixing Moulded Case Circuit Breaker MCCB over the existing woodorpanel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. Icu 100% lcs. In 4P MCCB, all Poles should have protection for Short-CicrcuitorOver Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open. Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. FOUR POLE 160Amps 25kA ---- etc., complete with all lead Each 16343.48 16343.48 1.0 False None None False None False 16343.48 0 3037026 102490 None Item 5.15.17 Supplying and fixing Moulded Case Circuit Breaker MCCB over the existing woodorpanel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Therm IS-13947. Icu=100% lcs. In 4P MCCB, all Poles should have protection for Short-CicrcuitorOver Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open. Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.FOUR POLE320-400Amps 50kA ---- etc., complete with all lead Each 36596.9 36596.9 3.0 False None None False None False 109790.7 0 3037027 102490 None Item 5.15.13 Supplying and fixing Moulded Case Circuit Breaker MCCB over the existing woodorpanel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. Icu=100% lcs. In 4P MCCB, all Poles should have protection for Short-CicrcuitorOver Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open. Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. FOUR POLE 250 A 25 kA ---- etc., complete with all lead Each 25998.62 25998.62 1.0 False None None False None False 25998.62 0 3037028 102490 None Item 5.18.1 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ONorOFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32Amps SP ---- etc., complete with all lead Each 504.39 504.39 4.0 False None None False None False 2017.56 0 3037029 102490 None Item 5.18.9 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ONorOFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 50-63Amps TPN ---- etc., complete with all lead Each 3753.15 3753.15 17.0 False None None False None False 63803.55 0 3037030 102490 None Item 5.40.1 Supplying .........amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRPorDMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete.100Amps 4x30x6mm Aluminum Strips ---- etc., complete with all lead m 2995.96 2995.96 1.0 False None None False None False 2995.96 0 3037031 102490 None Item 5.41.6 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 50x100x50x6mm C channel ---- etc., complete with all lead m 918.84 918.84 8.0 False None None False None False 7350.72 0 3037032 102490 None Item 4.1.1 Fabricating, supplying and erecting swaged tubular pole of height …Mtr having three sections, and providing two coats of red oxide paint and finished with two coats of enamelled paint of approved quality and colour and M.S. base plate of suitable size welded at the bottom of the poleas per IS and 40mm dia GI or flexible PVC pipe of 1 mtr length fitted to the heavy gauge polycarbonate control box including 5way connector of size 167x125x82mm for 7.5M poleor200x160x98mm for remaining length of pole with front opening cover, with locking arrangements and suitable capacity MCB or DP switch, The pole shall be erected in cement concrete work 1:2:4 including excavation and refilling of planting depth of the pole to the ground level and the coping CC shall be up to 0.6M above ground level as per IS 2713 - 7. Erection of heavy duty pole on Footpath or median 9Mt 5Mt Hb,165.1mm dia 4.85mm thick x2M Hm, 139.7mm dia 4.50mm thick x 2M Ht,114.3mm dia 3.65mm thick as per IS 410 SP 32 ---- etc., complete with all lead Each 18838.7 18838.7 20.0 False None None False None False 376774.0 0 3037033 102490 None Item 11.8.3 Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr at Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP 66 optical and electrical compartment and impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection Min 5KV along with Over voltageor Overload, short circuitor miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50or60Hz application. Compliance to IS 10322orIEC 60598, LM 79 and LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with W System Power consumption. LED Efficiency 130lmorw, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABLorCPRI and any Government certified agency and Design and Development facility certified by ISO 9001:2008 . Housing with supplier word mark orname shall be Engraved or Embossing on the die cast housingor Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer and CreeorNichiaor LumiledsorOsram make LED Source. LED Streetlight 70watts ---- etc., complete with all lead Nos 7282.67 7282.67 20.0 False None None False None False 145653.4 0 3037034 102490 None Item 13.2.2 Supplying and Fixing........mm dia clampsss A GI pipe bracket upto 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MVorSVorMHorFTL street light fitting of all capacities on railorRCCorwallortubular pole, using suitable clamps, bolts, nuts and wiring using suitable capacity wires.Using 32mm dia G.I.Pipe ---- etc., complete with all lead Each 1573.94 1573.94 20.0 False None None False None False 31478.8 0 3037035 102490 None Item 11.12.2 Supply of LED Bollard light fitting of W with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonateorclear glass material, delivering superior light output. Rated life Burning Hrs 50000 hr at Lumen Maintenance of 70%, CCT 5500K, IP 66 optical and electrical compartment and impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection Min 5KV along with Over voltageorOverload, short circuitor miss-wiring protection. Universal Voltage driver to operate wide voltage range from 100V to 270V 50or60Hz application. Compliance to IS 10322orIEC 60598, LM 79 and LM 80 Adherence with RoHS. UL approved MCPCB, with 2 years Warranty against any manufacturing defect working under standard electrical condition. 8W 1 Mtr Height ---- etc., complete with all lead Each 5504.48 5504.48 14.0 False None None False None False 77062.72 0 3037036 102490 None Item 13.50 Fixing halogenormetal halide or SVL or IL or LED floodlight fitting over existing pole or wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. ---- etc., complete with all lead Each 196.89 196.89 20.0 False None None False None False 3937.8 0 3037037 102490 None Item Least Quotation Rate Supply of 08 KVA Isolated Power Distribution panel for OT with Online monitoring, with fault location and with Programmable Remote Alarm Indicator Electrical Safety system: IEC 60364-7-710: “Electrical installation ofbuildings-Requirements for special installations for medical locations” Group-2 and Indian NEC- SP-30- Section 4, 2011, provision P5 requires unearthedIT system for all critical medical locations O.T, I.C.U, I.C.C.U, PrematureBaby Room etc. Therefore, an Electrical Safety Alarm System shall beinstalled to ensure patient and employee safety against risk of electrical shock, fire and damage of electrical insulation used in equipment and powerdistribution circuits. The system shall provide perfect ungrounded powersupply system in OT; ensure no fire, no electrical spark, no MCB tripping evenin case of 1st insulation fault BIS NEC-SP-30 , P5 location requirement;ensure 24X7 Insulation monitoring of entire electrical distribution system andan audio visual remote and local alarm even in case of 1st fault; never give anyspurious alarm or false alarm, fool proof against EMIorEMC effects; should havea system to identify faulty feeder or socket or equipment online without trippingthe system; a periodic self diagnostic features to identify malfunctions in thesystem itself. Insulation monitoring devices using a Active measuring principle in compliance with IEC 61557-8andIEC-60364-7-710 should be used.Insulation monitor shall have facility to monitor over current and temperature monitoring facility of the Isolation transformer.Fault Location system should be in accordance with IEC 61557-9 and IEC 60364-7-710. a.An Isolation Transformer 10KVA max as per IEC-61558-2 and IEC-60364-7-710 along with insulation monitoring deviceand fault location system shall be provided as mentioned above. Supplieror Vender to quote necessary hardware to fulfill the requirement. b.A complete panel consisting of all items along with indicating lamp for Mains On, Healthy and Faulty condition, MCBs, Exhaust Fan and air filter shall be supplied. All internal wiring should terminate in connectors with screw and clampspring connections of the Klippon type mounted, on a DIN rail and labeledwith indelible proprietary labels. Individual fuses or miniature circuitbreakers should protect all internal circuits. All internal wiring should be ofthe high temperature type and enclosed in propriety ducting or mini. Allinternal wires should be marked with plastic ferrule type cable markers, forease of identification.Bender Make or Equivalent. ---- etc., complete with all lead Each 1318060.0 1318060.0 2.0 False None None False None False 2636120.0 0 3037038 102490 None Item 5.19.11 upplying and fixing regular MCB distribution boards on wallorood board or flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phaseor3 phaseorsingle door with powder coated painting Made out of 14 SWG MS enclosure. 4 Way TPN Double door ---- etc., complete with all lead Each 4907.78 4907.78 1.0 False None None False None False 4907.78 0 3037039 102490 None Item 5.18.4 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ONorOFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 6-32 Amps DP ---- etc., complete with all lead Each 898.18 898.18 3.0 False None None False None False 2694.54 0 3037040 102490 None Item 5.47 Supplying and fixing Microprocessor based Electronic timer without contactor, Din Mounting using necessary bolts, nuts and washers etc.,. 3-120sec setting. ---- etc., complete with all lead Each 2813.65 2813.65 1.0 False None None False None False 2813.65 0 3037041 102490 None Item 5.49.3 Supplying and fixing of solar Lux level street light control switch single phase including suitable capacity contactor- 8KW ---- etc., complete with all lead Each 14609.11 14609.11 1.0 False None None False None False 14609.11 0 1710321894000 0 None None Buildings CCU Gadag - MGPLS 10758028.4 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3037042 102491 None Item Approved Rate Oxygen Manifold: Main 10+10 Cylinder Oxygen Manifold Should be suitable to withstand a pressure of 140 KgorCm2and above along with high pressure copper annealed tail pipes with end Brass adapter suitable for Oxygen Cylinders and manifold. Top frame comprising of high pressure copper pipes of size 12mm I.D x 1.5mm wall thick, with high pressure brass fittings made of high tensile brass and connections through nontoreturn values; high pressure copper tail pipes, made of high pressure copper pipe of size 7mm I.D x 1.5mm wall thick. The design of middle and bottom frames Should be provided to fit both round and flat bottom cylinders safely. The manifold should be tested hydraulically at 3500 pig. ---- etc., complete with all lead Set 128915.0 128915.0 1.0 False None None False None False 128915.0 0 3037043 102491 None Item Approved Rate Micro process based Automatic High flow upto 2100 ltrs or min Oxygen Control Panel. 3 SOURCE FULLY AUTOMATIC OXYGENCONTROL PANEL Working Pressure from the oxygen concentrator plant 4.1 kgorcm2 Future Provision Working Pressure from fully automatic control panel.4.1 kgorcm2 Working Pressure from Emergency manifold system 4.1 kgorcm2 Changeover unit of all 3 sources Should be at the pressure from oxygen concentrator plant Below 4.1kgorcm2 Changeover unit of all 3 sources Should be at the pressure from main Manifold system Below 4.1kgorcm2 Changeover unit of all 3 sources Should be at the pressure from Emergency manifold system Below 4.1kgorcm2 The Control panel shall be of fully integrated type with all safety futures inbuilt for high pressure and high flow up to 2200 liters or min Oxygen system. All the electrical circuits Should be operated at 12 volts and 24 volts with provision of inbuilt power conversion equipment.. The Panel shall have the necessary instruments, gauges, LED Indicators etc. complete with Separate indicators for from separate 3 sources. Pressure from oxygen concentrator plant Green signal for Normal pressure and Red signal for Low pressure. Pressure for manifold system Green signal for Normal Pressure and Red signal for low pressure. Left bank Green signal for Normal Pressure and Red for Low pressure. In Right bank Green signal for Normal Pressure and Red for Low pressure. In Emergency manifold Green signal for Normal Pressure and Red for Low pressure. Main Line Green signal for Normal Pressure and Red for Low pressure. Oxygen Manifold System Emergency 2 2 Cylinder Oxygen Manifold Should be suitable be withstand a pressure of 140 KgorCm2and above, along with high pressure copper annealed tail pipes with end Brass adapter suitable for Oxygen Cylinders and manifold. Top frame comprising of high pressure copper pipes of size 12mmI.D 1.5mm wall thick, with high pressure brass fittings made of high tensile brass and connections through non to return values high pressure copper tail pipes, made of high pressure copper pipe of size 7mm I.D 1.5mm wall thick and a single state high pressure high flow regulator connected to a high pressure brass block. The design of middle and bottom frames should be provided to fit both round and flat bottom cylinders safely. The manifold should be tested hydraulically at 3500 pig and necessary test certificates should accompany along with the supply. Semi automatic control panel. Semi automatic control panels designed for various control functions required during supply of oxygen through the manifold unit. Enclosed in a metal cabinet. This semi automatic control panel is highly efficient in triggering the signal for the Reserve system to go operational in case primary and secondary system fails in emergency. This panel is normally connected in a permanent mode and change over is semi automatic. Some of the features of this panels are as follows   Control panel shall be made of M.S. duly powder coated.  Easy maintenance. Highly reliable. Designed for safety and continuity of flow supply at a constant pressure. Pressure gauge facility to indicate the gas pressure of each header and pipe line distribution pressure. Capable to provide a distribution flow rate in excess of 1500LPM. Should have Incorporation of safety features in case pressure exceeds 100Psi. ---- etc., complete with all lead Nos 217120.0 217120.0 1.0 False None None False None False 217120.0 0 3037044 102491 None Item Approved Rate Semi automatic control panel. Semi automatic control panels designed for various control functions required during supply of oxygen through the manifold unit. Enclosed in a metal cabinet. This semi automatic control panel is highly efficient in triggering the signal for the Reserve system to go operational in case primary and secondary system fails in emergency. This panel is normally connected in a permanent mode and change over is semi automatic. Some of the features of this pannels are as follows : . Control panel shall be made of M.S.duly powder coated. Easy maintenance. Highly reliable. Designed for safety and continuity of flow supply at a constant pressure. Pressure gauge facility to indicate the gas pressure of each header and pipe line distribution pressure. Capable to provide a distribution flow rate in excess of 1500LPM. ---- etc., complete with all lead Set 94990.0 94990.0 1.0 False None None False None False 94990.0 0 3037045 102491 None Item Approved Rate Nitrous Oxide Main Manifold System Supply, Installation, Testing and commissioning of 2 cylinder 1 + 1 Nitrous Oxide manifold supply with all necessary controls and safety fittings. Make of AKTIV or Equilaent Make complete with all lead and lift, as per specifications and as per directions of the Engineer in charge of the work. Semi Automatic Nitrous Oxide Main Manifold Control Panel Supply, Installation, Testing and commissioning of 500 lpm deliver capacity manifold control panel, control panel should have all necessary controls and safety fittings. with all lead and lift, as per specifications and as per directions of the Engineer in charge of the work. Nitrous Oxide System totototo etc., complete with all lead and lift, as per specifications and as per directions of the Engineer in charge of the work. ---- etc., complete with all lead Set 88500.0 88500.0 1.0 False None None False None False 88500.0 0 3037046 102491 None Item Approved Rate Nitrous Oxide Emergency Manifold System Supply, Installation, Testing and commissioning of 1 cylinders Nitrous Oxide manifold supply with all necessary controls and safety fittings and 0 To 10 Kgorcm2 High Presuure Regulator complete with all lead and lift, as per specifications and as per directions of the Engineer in charge of the work. ---- etc., complete with all lead Set 47200.0 47200.0 1.0 False None None False None False 47200.0 0 3037047 102491 None Item Approved Rate Compressed Air System: System For Medical use. Type : Reciprocating, Air cooled oil grease free Capacity of Piston Displacement : 22.93 cfm 649 Lpm Drive : Belt driven No. of Air Compressors : 2 Nos. 1W + 1S by Motor Capacity : 5 HP as required Rceiver Capacity : 1000 liters water capacity Air reciever Receiver type : Vertical type with inlet, outlet and drain provisions ---- etc., complete with all lead Set 800630.0 800630.0 1.0 False None None False None False 800630.0 0 3037048 102491 None Item Approved Rate Duplex Medical Air Dryer System Breathing Air System 40 CFM Air Dryer Min Working Pressure should be 4 bar, Rated Inlet Pressure should be 7 bar Max Working Pressure should be 16 bar Supply Voltage Should be 100to240 VAC, 50or60 Hz, 1 Ph Rated Inlet temperature should be 38 deg C Dryer capable to give should be 40 PDP Purge Loss 15percent Air quality As per NFPA 99 Dual System Three stage filter Dessicated drier CO and Dew point level as per NFPA 99 Bacterial Penetration 0.00001percent Failure IndicationPurge Saving control Manual No refrigerant used Energy saving Dew point based dryer cycling. ---- etc., complete with all lead Nos 88205.0 88205.0 1.0 False None None False None False 88205.0 0 3037049 102491 None Item Approved Rate COMPRESSED AIR BREATHING FILTERATION SYSTEMto3 STAGE The filters Shouldhave maximum contaminant removal efficiency with minimum pressure drop. The filtration system should conform to breathing air filtration as per ISO 8573 Ch I Standard. Total 3tostages of filters Shouldbe used as mentioned below: Stage 1 Oil aerosol contents removal up to 0.5 mgorcum. Stage 2 Oil aerosol contents removal up to 0.01 mgorcum. Stage 3: Oil content removal up to 0.003 mgorcum along with removal of oil vapor and hydrocarbon odor as per ISO 8573 ChtoI Standard. ---- etc., complete with all lead Set 70800.0 70800.0 1.0 False None None False None False 70800.0 0 3037050 102491 None Item Approved Rate Air Cooler : Supply, Installation, Testing and Commissioning of 80 CFM Air cooler system, with 3 phase fan High RPM Fan suitable for 415 V, 3Phs 50 Hz ---- etc., complete with all lead Nos 70800.0 70800.0 1.0 False None None False None False 70800.0 0 3037051 102491 None Item Approved Rate VACCUM SUPPLY SYSTEM COMPLETE IN ALL RESPECT with receiver tank The pump installation shall be duplex system consisting of two 1W+1S BY Identical Rotary Vane Pumps each of which shall be capable of independently producing designed systems flow rate. The pump shall be clearly marked with its performance, both its free air displacement and its volumetric throughput. Each pump should have capacity of minimum 3276 LPM 200m3orh i.e., 117 CFM. Pump should be capable of providing a vacuum of not less than 650 mm Hg 87 kPa. The driving motor shall directly drive the pump unit and it shall be manufactured in accordance with HTM 2022orHTM 02to01 or conforms to IEC Standards. Recommendations suitable for 415 voltes, 3 phase, 50 Hz power supply.Each pump shall have a built in nontoreturn valve and pressure switch such that inadvertent reversal of the motor Should not pressurize the Reservoir or the distribution system. Pump should be of reputed make as per international standards. The control panel shall consist of three separate Compartments, two compartments shall hold the motor starters, MCBS ammeters, and hour’s runtometers, for each pump. The remaining compartment shall house the vacuum switches, status monitoring equipment, delay timer and necessary interlock, selector switch with automatic change over, etc., complete with internal wiring using copper conductors. Control Panel system should be front operable. The system should include vacuum storage reservoir tank, Rated for full vacuum services with the storage capacity of approx 1500 Liter or as per standard recommendation. It should be equipped with an vacuum gauge and provision for manual draining by pass valve. The inside of the tank should be coated with a twotocomponent coating to provide a hard, durable lining for rust protection. The System should provide audible and visual local and remote alarm indications for the compressor temperature malfunction and reserve compressor in use. All control and alarm functions should remain energized while any compressor remains electrically ontoline. The System should provide manual reset for thermal malfunction shutdown. The lag Pumps should be able to start automatically if the lead compressor fails to operate. ---- etc., complete with all lead Set 949900.0 949900.0 1.0 False None None False None False 949900.0 0 3037052 102491 None Item Approved Rate VACUUM BACTERIAL FILTERATION, Suitable Medical Vacuum filters are used for removal of bacteria and other contamination from the suction side of vacuum pumps, preventing infection of pump and the atmosphere These elements shall be of pleated construction giving a high surface area and long operational life. The efficiency to exceed the 0.005 percent penetration specified in HTM 2022 for infectious disease unit.to i.e. complete bacterial removal. Elements shall be fitted in an aluminum housing suitable for various capacities. These are to be internally protected against corrosion by an alicorn treatment. The inner and outer surfaces of the housing are epoxy coated. Complete assembly shall be fitted with a sterilizable drain flask with isolation valve for removal of liquid if any. Differential pressure indicators are to be provided to monitor the status of element. Basics Specifications are as given below, FAC AT Atmospheric 1850 LPM Size G 1 1/2 Bacterial Removal. 0001 percent penetration when tested to BS 3928 ---- etc., complete with all lead Set 165200.0 165200.0 1.0 False None None False None False 165200.0 0 3037053 102491 None Item Approved Rate Copper Fittings: Supply, Installation, Testing and Commissioning : All copper pipes should be Solid drawn, seamless, deoxidized, non arsenical, half hard, tempered and degreased materials conforming to BS:EN :13348:2001 + A1:2005. Fittings should be made of copper and suitable for a stem of working pressure of 17 bar and Should confirm to BS 864 with specially made for brazed socket type connections. Copper Pipe 42mm. ODx1.2 mm.thick. ---- etc., complete with all lead m 3608.44 3608.44 90.0 False None None False None False 324759.6 0 3037054 102491 None Item Approved Rate Copper Fittings: Supply, Installation, Testing and Commissioning : All copper pipes should be Solid drawn, seamless, deoxidized, non arsenical, half hard, tempered and degreased materials conforming to BS:EN :13348:2001 + A1:2005. Fittings should be made of copper and suitable for a stem of working pressure of 17 bar and Should confirm to BS 864 with specially made for brazed socket type connections. Copper Pipe 35mm. ODx1.2 mm.thick. ---- etc., complete with all lead m 2570.04 2570.04 180.0 False None None False None False 462607.2 0 3037055 102491 None Item Approved Rate Copper Fittings: Supply, Installation, Testing and Commissioning : All copper pipes should be Solid drawn, seamless, deoxidized, non arsenical, half hard, tempered and degreased materials conforming to BS:EN :13348:2001 + A1:2005. Fittings should be made of copper and suitable for a stem of working pressure of 17 bar and Should confirm to BS 864 with specially made for brazed socket type connections. Copper Pipe 28mm. ODx0.9 mm.thick. ---- etc., complete with all lead m 1492.69 1492.69 350.0 False None None False None False 522441.5 0 3037056 102491 None Item Approved Rate Copper Fittings: Supply, Installation, Testing and Commissioning : All copper pipes should be Solid drawn, seamless, deoxidized, non arsenical, half hard, tempered and degreased materials conforming to BS:EN :13348:2001 + A1:2005. Fittings should be made of copper and suitable for a stem of working pressure of 17 bar and Should confirm to BS 864 with specially made for brazed socket type connections. Copper Pipe 22mm. ODx0.9 mm.thick. ---- etc., complete with all lead m 1156.39 1156.39 450.0 False None None False None False 520375.5 0 3037057 102491 None Item Approved Rate Copper Fittings: Supply, Installation, Testing and Commissioning : All copper pipes should be Solid drawn, seamless, deoxidized, non arsenical, half hard, tempered and degreased materials conforming to BS:EN :13348:2001 + A1:2005. Fittings should be made of copper and suitable for a stem of working pressure of 17 bar and Should confirm to BS 864 with specially made for brazed socket type connections. Copper Pipe 15mm. ODx0.9 mm.thick. ---- etc., complete with all lead m 949.9 949.9 950.0 False None None False None False 902405.0 0 3037058 102491 None Item Approved Rate Copper Fittings: Supply, Installation, Testing and Commissioning : All copper pipes should be Solid drawn, seamless, deoxidized, non arsenical, half hard, tempered and degreased materials conforming to BS:EN :13348:2001 + A1:2005. Fittings should be made of copper and suitable for a stem of working pressure of 17 bar and Should confirm to BS 864 with specially made for brazed socket type connections. Copper Pipe 12mm. ODx0.7 mm.thick. ---- etc., complete with all lead m 651.36 651.36 420.0 False None None False None False 273571.2 0 3037059 102491 None Item Approved Rate OUTLET POINTS Should have terminated properly Double locking DIN type valves which have a parking facility which also avoids interchanging of outlets and keysGas specific probes Oxygen Terminals to drops of 10 mm dia copper pipe terminated properly DIN type valves which have a parking facility which also avoids interchanging of outlets and keysGas specific probes ---- etc., complete with all lead Nos 3392.5 3392.5 120.0 False None None False None False 407100.0 0 3037060 102491 None Item Approved Rate Vacuum Terminal to drops of 10 mm dia copper pipe terminated properly DIN type valves which have a parking facility which also avoids interchanging of outlets and keysGas specific probes ---- etc., complete with all lead Nos 3392.5 3392.5 70.0 False None None False None False 237475.0 0 3037061 102491 None Item Approved Rate Compressed Air Terminals 4 Bar to drops of 10 mm dia copper pipe terminated properly DIN type valves which have a parking facility which also avoids interchanging of outlets and keysGas specific probes ---- etc., complete with all lead Nos 3392.5 3392.5 70.0 False None None False None False 237475.0 0 3037062 102491 None Item Approved Rate Compressed Air Terminals 7 Barto drops of 10 mm dia copper pipe terminated properly DIN type valves which have a parking facility which also avoids interchanging of outlets and keysGas specific probes ---- etc., complete with all lead Nos 3392.5 3392.5 7.0 False None None False None False 23747.5 0 3037063 102491 None Item Approved Rate Nitous Oxide Terminals to drops of 10 mm dia copper pipe terminated properly DIN type valves which have a parking facility which also avoids interchanging of outlets and keysGas specific probes ---- etc., complete with all lead Nos 3392.5 3392.5 7.0 False None None False None False 23747.5 0 3037064 102491 None Item Approved Rate ACCESSORIES ALONG WITH CALIBRATION CERTIFICATES. Oxygen Flow meter with Humidifier Bottle:  Flow meter should be Backpressure Compensated. *   Flow meter should be accurate gas flow measurement and control within a range of 0to15 liters per minute. *       It should meet strict precision and durability standards. *  Flow meter body should be made of brass material. *     Flow tube and shroud components should be made of clear, impact resistant polycarbonate. *    The humidifier bottle should be unbreakable polycarbonate material and autoclavable at 134 degrees centigrade. The humidifier should have built in safety valve. ---- etc., complete with all lead Nos 2849.7 2849.7 70.0 False None None False None False 199479.0 0 3037065 102491 None Item Approved Rate Single piece wall mounted suction collection and regulation unit. With jar capacity of 600ml each shall be provided at each of the bed side. Jars are should be made of autoclavable materials. The units shall be clamped to the wall using suitable clamps. ---- etc., complete with all lead Nos 3528.2 3528.2 67.0 False None None False None False 236389.4 0 3037066 102491 None Item Approved Rate Theatre Vacuum Unit: *   The unit should comprise of two reusable 2000 ml shatter resistant bottle, each made up of poly carbonate material and fully auto cleavable at 134 degree centigrade. *  Should have a vacuum regulator with instant ON or OFF switch a three way selector switch with an option to operate either. to Left, Right or Both All the above items Should be mounted on a Trolley having a free moving castor wheels. ---- etc., complete with all lead Nos 14750.0 14750.0 3.0 False None None False None False 44250.0 0 3037067 102491 None Item Approved Rate ISOLATION VALVES: Should be 900 turn, ball valves of brass body, duly chrome plated on the outer periphery, SS ball with high quality Teflon seated, connected to pipeline with brass ferrule for easy maintenance. ID of the copper pipe and the ball valve should have same dimensions to avoid the flow friction Isolation Valves 42 mm ---- etc., complete with all lead Nos 8142.0 8142.0 2.0 False None None False None False 16284.0 0 3037068 102491 None Item Approved Rate ISOLATION VALVES: Should be 900 turn, ball valves of brass body, duly chrome plated on the outer periphery, SS ball with high quality Teflon seated, connected to pipeline with brass ferrule for easy maintenance. ID of the copper pipe and the ball valve should have same dimensions to avoid the flow friction Isolation Valves 35 mm ---- etc., complete with all lead Nos 5428.0 5428.0 6.0 False None None False None False 32568.0 0 3037069 102491 None Item Approved Rate ISOLATION VALVES: Should be 900 turn, ball valves of brass body, duly chrome plated on the outer periphery, SS ball with high quality Teflon seated, connected to pipeline with brass ferrule for easy maintenance. ID of the copper pipe and the ball valve should have same dimensions to avoid the flow friction Isolation Valves 28 mm ---- etc., complete with all lead Nos 4071.0 4071.0 10.0 False None None False None False 40710.0 0 3037070 102491 None Item Approved Rate ISOLATION VALVES: Should be 900 turn, ball valves of brass body, duly chrome plated on the outer periphery, SS ball with high quality Teflon seated, connected to pipeline with brass ferrule for easy maintenance. ID of the copper pipe and the ball valve should have same dimensions to avoid the flow friction Isolation Valves 22 mm ---- etc., complete with all lead Nos 3392.5 3392.5 15.0 False None None False None False 50887.5 0 3037071 102491 None Item Approved Rate ISOLATION VALVES: Should be 900 turn, ball valves of brass body, duly chrome plated on the outer periphery, SS ball with high quality Teflon seated, connected to pipeline with brass ferrule for easy maintenance. ID of the copper pipe and the ball valve should have same dimensions to avoid the flow friction Isolation Valves 15 mm ---- etc., complete with all lead Nos 2714.0 2714.0 53.0 False None None False None False 143842.0 0 3037072 102491 None Item Approved Rate Zonal Valve box three Gas services An Zonal area valve box should have bellow spec. Wall mounted M.S. box with powder coated and lockable, front glass mounting easily visible and using imported brass body quarter turn ball valves using for opening and closing position. The valve box door cannot be close during valve close position. ---- etc., complete with all lead Nos 18319.5 18319.5 5.0 False None None False None False 91597.5 0 3037073 102491 None Item Approved Rate Zonal Valve box five Gas services An Zonal area valve box should have bellow spec.  Wall mounted M.S. box with powder coated and lockable, front glass mounting easily visible and using imported brass body quarter turn ball valves using for opening and closing position. The valve box door cannot be close during valve close position. ---- etc., complete with all lead Nos 23364.0 23364.0 4.0 False None None False None False 93456.0 0 3037074 102491 None Item Approved Rate Digital Area Alarm for Three Gas Systems. Micro processor controlled Area Gas alarm panel five Lines, Should audioto visual alarms for each gas used on the floor and come fitted with test and mute button. Running on electricity 220V, these units are suggested to be fitted on each floor as well as areas of heavy usage. It should be fitted with a digital pressure gauge. It indicates low, medium and high pressure sensors. ---- etc., complete with all lead Nos 34220.0 34220.0 5.0 False None None False None False 171100.0 0 3037075 102491 None Item Approved Rate Digital Area Alarm for Five Gas Systems. Micro processor controlled Area Gas alarm panel five Lines, Should audioto visual alarms for each gas used on the floor and come fitted with test and mute button. Running on electricity 220V, these units are suggested to be fitted on each floor as well as areas of heavy usage. It should be fitted with a digital pressure gauge. It indicates low, medium and high pressure sensors. ---- etc., complete with all lead Nos 41300.0 41300.0 4.0 False None None False None False 165200.0 0 3037076 102491 None Item Approved Rate Bed Headed Panel and Railing. 1.5M Double railing Bed headed panels should have below Specifications. Accessories 1. IV Stand extendable type with aluminium slider. 2. Monitor stand wall panel mounted. 3. Ward vaccum unit slider. 4. 3or6W LED light fixture. 5. Twpo duplex 230 V,6or16 Amp 6 nos of 6 amps sockets with control switches Electrical Sockets. Provision Medical Gas Terminal Units as follows.  2.1 Two oxygen outlet. 2.2  One Vacuum outlet. 2.3 One compressed Air outlet 4 Bar. ---- etc., complete with all lead Nos 31860.0 31860.0 45.0 False None None False None False 1433700.0 0 3037077 102491 None Item Approved Rate Surgeon Single Arm Pendant: The material of the Pendent should be Singletoarmed rotary ceiling mounted surgical Pendent Hightostrength aluminum alloy. Extension arm 700mm. Loading capacity: 70to150kg. Level degrees rotation:340n.w.:158kg. Should be provision for Gas outlets Oxygen 02 nos, Vaccum 01 nos, Air 4 Bar 01 nos, Air 7 Bar 01 nos, Nitrous Oxide01 nos, Power socket 08 nos, Grounding terminal 01 nos, Platform 03 nos, IV pole 01 nos, Drawer 01 nos. ---- etc., complete with all lead Nos 230100.0 230100.0 3.0 False None None False None False 690300.0 0 3037078 102491 None Item Approved Rate Anaesthesia Single Arm Pendant: The material of the Pendent should be Singletoarmed rotary ceiling mounted surgical Pendent Hightostrength aluminum alloy. Extension arm 700mm.Loading capacity: 70to150kg.Level degrees rotation:340n.w.:158kg. Should be provision for Gas outlets Oxygen 02 nos, Vaccum 01 nos,Air 4 Bar 01 nos,Air 7 Bar 01 nos, Nitrous Oxide01 nos,Power socket 08 nos,Grounding terminal 01 nos,Platform 03 nos, IV pole 01 nos,Drawer 01 nos. ---- etc., complete with all lead Nos 230100.0 230100.0 3.0 False None None False None False 690300.0 0 1710321894000 0 None None Buildings CCU Gadag - Fire Fighting 10356879.74 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3037079 102492 None Item 15.83.1 Supplying, Installing, testing and commissioning approved make Centrifugal pump end suction type couple to Electric motor of suitable Hp, fitted on a common base frame and rated for Fire duty. The quoted price shall aslso include 2 nos. Pressure guages fitted on suction & delivery side of the pump. The pumps shall run on 400/440V, 3 ph, 50Hz electric supply. Duty of pums: 1620 Lpm @ 70.0m Head. Control panel shall be per specification stated in Item No.87. including cost of materials, labour, usage charges of machinery complete as per specifications. (Cost of control pannel is not included) ---- etc., complete with all lead Nos 285619.0 285619.0 1.0 False None None False None False 285619.0 0 3037080 102492 None Item 15.84.2 Supplying, Installing testing and commissioning of fire hydrant multi stage pump capable of delivering 1620 Lpm@ 70.0m head coupled to water coiled diesel enginer of adequate. HP It shall be fitted with a radiator on a common base frame with complete ancillary units such as coiling sytem, non return vialve, Y strainer, fuel tank of adequante capactiy, Pressure guage, pressure switch etc. complete Control panel shall be per specification stated in Item No.87. including cost of materials, labour, usage charges of machinery complete as per specifications. (Cost of control pannel is not included) ---- etc., complete with all lead Nos 595546.0 595546.0 1.0 False None None False None False 595546.0 0 3037081 102492 None Item 15.85 Supplying, Installing testing & commissioning electrically driven jockey pump of capacity 180.0 Lmpm at 75.0m head with all the necessary accessories viz. Pressure guages etc. operating on 3Ph 50Hz, 400/440V AC supply including foundation bolt etc. complete. Control panel shall be as per item No.87, including cost of materials, labour, usage charges of machinery complete as per specifications. ---- etc., complete with all lead Nos 103309.0 103309.0 1.0 False None None False None False 103309.0 0 3037082 102492 None Item 15.139 Supplying Installing testing and commissiong COMMON Control panel for fire fighting system consiting of electrical motor driven 60HP Main fire pump, Diesel engine driven pump 60 HP Sprinkler pump 50HP & Jockey pump 25HP ---- etc., complete with all lead Unit 337881.19 337881.19 1.0 False None None False None False 337881.19 0 3037083 102492 None Item 15.77 Supplying, Installing testing & commissioning approved make Centrifugal pump end suction type coupled to Electric motor of suitable HP, fitted on a commonbase frame and rated for Fire duty. The quated price shall aslo include 2 Nos. Pressure guages fitted on suction & delivery sides of the pump. The pumps shall run on 400/440V 3 ph. 50 Hz electric supply. Duty of pumps: 900 Lpm @ 35.0m Head. Control panel shall be as specified in item no, 87, including cost of materials, labour, usage charges of machinery complete as per specifications.(FOR WATER CURTAIN) ---- etc., complete with all lead Nos 109386.0 109386.0 1.0 False None None False None False 109386.0 0 3037084 102492 None Item 15.127.2 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13039 of following sizes as required 150mm dia ---- etc., complete with all lead Nos 15192.5 15192.5 9.0 False None None False None False 136732.5 0 3037085 102492 None Item 15.127.3 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13039 of following sizes as required 100mm dia ---- etc., complete with all lead Nos 10938.59 10938.59 5.0 False None None False None False 54692.95 0 3037086 102492 None Item 15.127.4 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13039 of following sizes as required 80mm dia ---- etc., complete with all lead Nos 8507.8 8507.8 2.0 False None None False None False 17015.6 0 3037087 102492 None Item 15.128.2 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :150 mm dia ---- etc., complete with all lead Nos 13977.09 13977.09 6.0 False None None False None False 83862.54 0 3037088 102492 None Item 15.128.3 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :100 mm dia ---- etc., complete with all lead Nos 8653.64 8653.64 2.0 False None None False None False 17307.28 0 3037089 102492 None Item 15.128.4 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :80 mm dia ---- etc., complete with all lead Nos 6684.7 6684.7 2.0 False None None False None False 13369.4 0 3037090 102492 None Item 15.129.1 Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.200mm dia ---- etc., complete with all lead No 29777.3 29777.3 3.0 False None None False None False 89331.9 0 3037091 102492 None Item 15.128.3 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :100 mm dia ---- etc., complete with all lead No 15058.8 15058.8 1.0 False None None False None False 15058.8 0 3037092 102492 None Item 15.136 Supplying and fixing air vessel made of 250 mm dia, 8mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required. ---- etc., complete with all lead No 36462.0 36462.0 1.0 False None None False None False 36462.0 0 3037093 102492 None Item 15.132 Pressure guage of 150 mm dia including Isolation Valve and forged siphon Tube including with all accssories as per IS:Spec. ---- etc., complete with all lead No 3524.66 3524.66 3.0 False None None False None False 10573.98 0 3037094 102492 None Item 15.131 Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. ---- etc., complete with all lead Nos 2370.02 2370.02 6.0 False None None False None False 14220.12 0 3037095 102492 None Item 11.16.2 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete with all lead Kg 178.66 178.66 300.0 False None None False None False 53598.0 0 3037096 102492 None Item 32.14 FIREFIGHTING ELECTRICALSupply of the Following XLPE armoured cable 1100 V Grade with ISI mark stranded / solid, aluminimum conductor complete with crimping type Lugs and Glands etc completed. 3.5 Core 95.00 Sq.mm.Main Panel Electrical Pump ---- etc., complete with all lead Km 624764.21 624764.21 0.18 False None None False None False 112457.5578 0 3037097 102492 None Item 32.05 FIREFIGHTING ELECTRICALSupply of the Following XLPE armoured cable 1100 V Grade with ISI mark stranded / solid, aluminimum conductor complete with crimping type Lugs and Glands etc completed4.0 Core 16.00 Sq.mm.Main Panel to Jockey ---- etc., complete with all lead Km 222955.4 222955.4 0.2 False None None False None False 44591.08 0 3037098 102492 None Item Least Quotation Rate Supplying and laying 12 Core x 2.5Sqmm For Main Panel to DG ---- etc., complete with all lead m 684.4 684.4 50.0 False None None False None False 34220.0 0 3037099 102492 None Item 1.17.3 Supplying and laying 3 Core x 1.5Sqmm for Pressure Switch ---- etc., complete with all lead m 115.46 115.46 50.0 False None None False None False 5773.0 0 3037100 102492 None Item 9.4.6 Supplying, installation, testing & commissioning of 12V ..AH batteries in poly propylene container for D.G. sets. Low maintenance batteries, plate type. (150 AH capacity) ---- etc., complete with all lead Nos 34258.47 34258.47 1.0 False None None False None False 34258.47 0 3037101 102492 None Item 4.1.4 Supplying and installing following size of perforated painted with powder cating m.s. cable trays with perforation not more than 17.5% in convenient sections, joined with connectors, suspended from the ceiling with m.s. suspenders including bolts & nuts, painting suspendrrs etc as required. ---- etc., complete with all lead m 916.85 916.85 100.0 False None None False None False 91685.0 0 3037102 102492 None Item 12.58.2 GI/Copper strips for grounding connections, using necessary fixing materials as required. (25 x 3 mm GI strip) ---- etc., complete with all lead m 99.66 99.66 150.0 False None None False None False 14949.0 0 3037103 102492 None Item 15.86 Supplying Installing, testing and commissioning of Gun metal AIR RELEASE VALVE SIZE OF 25mm dia including cost of materials, labour, usage charges of machinery complete as per specifications. complete ---- etc., complete with all lead Each 1823.1 1823.1 1.0 False None None False None False 1823.1 0 3037104 102492 None Item 15.125 SITC of Gun metal BALL VALVE SIZE OF 25mm dia ---- etc., complete as per specificaiton with all lead and lift, loading unloading, labour, hire charges of machineries and all such incidental charges necessary for successful completion of work and as per directions of the Engineer-in-charge of the work ---- etc., complete with all lead Nos 1458.48 1458.48 8.0 False None None False None False 11667.84 0 3037105 102492 None Item 15.126 SITC of Gun metal BALL VALVE SIZE OF 19/20 mm dia ---- etc., complete as per specificaiton with all lead and lift, loading unloading, labour, hire charges of machineries and all such incidental charges necessary for successful completion of work and as per directions of the Engineer-in-charge of the work ---- etc., complete with all lead Nos 1154.62 1154.62 8.0 False None None False None False 9236.96 0 3037106 102492 None Item 15.97.3 Supply, Installation testing and commissioning of approved make heavy quantity (Class 'C') confirming to as per IS1239 Such as Tees elbows check nuts unions,Flanger, Nipples etc. including cutting welding, Trending fixing on walls, cealing (Using 41-Tech pipe/M.S.angle supports work includes two coats of metal primer and two coats of Red enamel paint etc. 150 mm dia ---- etc., complete with all lead m 4740.05 4740.05 400.0 False None None False None False 1896020.0 0 3037107 102492 None Item 15.97.4 Supply, Installation testing and commissioning of approved make heavy quantity (Class 'C') confirming to as per IS1239 Such as Tees elbows check nuts unions,Flanger, Nipples etc. including cutting welding, Trending fixing on walls, cealing (Using 41-Tech pipe/M.S.angle supports work includes two coats of metal primer and two coats of Red enamel paint etc. 100 mm dia ---- etc., complete with all lead m 3463.89 3463.89 200.0 False None None False None False 692778.0 0 3037108 102492 None Item 15.97.5 Supply, Installation testing and commissioning of approved make heavy quantity (Class 'C') confirming to as per IS1239 Such as Tees elbows check nuts unions,Flanger, Nipples etc. including cutting welding, Trending fixing on walls, cealing (Using 41-Tech pipe/M.S.angle supports work includes two coats of metal primer and two coats of Red enamel paint etc. 80 mm dia ---- etc., complete with all lead m 2795.42 2795.42 120.0 False None None False None False 335450.4 0 3037109 102492 None Item 15.97.6 Supply, Installation testing and commissioning of approved make heavy quantity (Class 'C') confirming to as per IS1239 Such as Tees elbows check nuts unions,Flanger, Nipples etc. including cutting welding, Trending fixing on walls, cealing (Using 41-Tech pipe/M.S.angle supports work includes two coats of metal primer and two coats of Red enamel paint etc. 65 mm dia ---- etc., complete with all lead m 2066.18 2066.18 100.0 False None None False None False 206618.0 0 3037110 102492 None Item 15.97.7 Supply, Installation testing and commissioning of approved make heavy quantity (Class 'C') confirming to as per IS1239 Such as Tees elbows check nuts unions,Flanger, Nipples etc. including cutting welding, Trending fixing on walls, cealing (Using 41-Tech pipe/M.S.angle supports work includes two coats of metal primer and two coats of Red enamel paint etc. 50 mm dia ---- etc., complete with all lead m 1580.02 1580.02 120.0 False None None False None False 189602.4 0 3037111 102492 None Item 15.97.8 Supply, Installation testing and commissioning of approved make heavy quantity (Class 'C') confirming to as per IS1239 Such as Tees elbows check nuts unions,Flanger, Nipples etc. including cutting welding, Trending fixing on walls, cealing (Using 41-Tech pipe/M.S.angle supports work includes two coats of metal primer and two coats of Red enamel paint etc. 40 mm dia ---- etc., complete with all lead m 1276.16 1276.16 135.0 False None None False None False 172281.6 0 3037112 102492 None Item 15.97.9 Supply, Installation testing and commissioning of approved make heavy quantity (Class 'C') confirming to as per IS1239 Such as Tees elbows check nuts unions,Flanger, Nipples etc. including cutting welding, Trending fixing on walls, cealing (Using 41-Tech pipe/M.S.angle supports work includes two coats of metal primer and two coats of Red enamel paint etc. 32 mm dia ---- etc., complete with all lead m 972.31 972.31 100.0 False None None False None False 97231.0 0 3037113 102492 None Item 15.97.10 Supply, Installation testing and commissioning of approved make heavy quantity (Class 'C') confirming to as per IS1239 Such as Tees elbows check nuts unions,Flanger, Nipples etc. including cutting welding, Trending fixing on walls, cealing (Using 41-Tech pipe/M.S.angle supports work includes two coats of metal primer and two coats of Red enamel paint etc. 25 mm dia ---- etc., complete with all lead m 850.78 850.78 220.0 False None None False None False 187171.6 0 3037114 102492 None Item 15.98.2 Wraping and Galing of U/G pipe line work includes one coat of anti corrossion paint (Black) and two coats of Bituminous cloth. including cost of materials, labour, usage charges of machinery complete as per specifications. - 150 mm dia ---- etc., complete with all lead m 486.15 486.15 400.0 False None None False None False 194460.0 0 3037115 102492 None Item 15.98.3 Wraping and Galing of U/G pipe line work includes one coat of anti corrossion paint (Black) and two coats of Bituminous cloth. including cost of materials, labour, usage charges of machinery complete as per specifications. - 100 mm dia ---- etc., complete with all lead m 303.84 303.84 100.0 False None None False None False 30384.0 0 3037116 102492 None Item 15.127.3 Supplying, installing , testing and commissioning approved make CI butterfly valves of 100mm diameter confirming to IS 13039 with necessary nuts & bolts etc., complete ---- etc., complete as per specificaiton with all lead and lift, loading unloading, labour, hire charges of machineries and all such incidental charges necessary for successful completion of work and as per directions of the Engineer-in-charge of the work ---- etc., complete with all lead Nos 10938.59 10938.59 4.0 False None None False None False 43754.36 0 3037117 102492 None Item 15.127.6 Supplying, installing , testing and commissioning approved make CI butterfly valves of 50mm diameter confirming to IS 13039 with necessary nuts & bolts etc., complete ---- etc., complete as per specificaiton with all lead and lift, loading unloading, labour, hire charges of machineries and all such incidental charges necessary for successful completion of work and as per directions of the Engineer-in-charge of the work ---- etc., complete with all lead Nos 5469.29 5469.29 4.0 False None None False None False 21877.16 0 3037118 102492 None Item 18.23.2 Providing & fixing Flow Switch in following sizes M.S. pipe including connnection etc as required.150mm dia ---- etc., complete with all lead Each 10644.77 10644.77 4.0 False None None False None False 42579.08 0 3037119 102492 None Item 15.96.2 Providing, fixing, testing & commissioning ofinstallation control valve of cast iron body,brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm andhydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required : 150mm dia ---- etc., complete with all lead Each 85078.0 85078.0 1.0 False None None False None False 85078.0 0 3037120 102492 None Item 15.123 Supplying Installing, testing and commissioning of 150mm dia 4 way Fire brigade inlet connection with Non retrn valve of 4 nos. 63 mm dia. including cost of materials, labour, usage charges of machinery complete as per specifications. ---- etc., complete with all lead No 46185.2 46185.2 1.0 False None None False None False 46185.2 0 3037121 102492 None Item 15.124 Supplying Installing, testing and commissioning of 100mm dia 2 way Fire brigade inlet connection of 2 nos. 63 mm dia. including cost of materials, labour, usage charges of machinery complete as per specifications. ---- etc., complete with all lead No 40108.2 40108.2 1.0 False None None False None False 40108.2 0 3037122 102492 None Item 15.86 FIRE HYDRANT SYSTEM Supplying Installing, testing and commissioning of 63mm dia single headed Gun mental Hydrant Valve with flanged inlet, stop valve,spindle and cast iron hand wheel. It has a female instantaneous outlet with Blank Cap and is Hydrostatically tested to 21 Kgf/cm2 pressure having a flow rate of 900 LPM at 7 Kgf/cm 2 of pressure with blank cap and wheel as per IS 5290 etc. complete including cost of materials, labour, usage charges of machinery complete as per specifications. ---- etc., complete with all lead No 12761.69 12761.69 8.0 False None None False None False 102093.52 0 3037123 102492 None Item 15.88 Supplying Installing, testing and commissioning of Reinforced Rubber Lined 2nos .RRL Fire hose of 63mm dia 15m length as per IS 8423 binded with one set of male and Female lnstantainious Gun metal coupling as per IS 903 complete including cost of materials, labour, usage charges of machinery complete as per specifications. ---- etc., complete with all lead Each 6077.0 6077.0 16.0 False None None False None False 97232.0 0 3037124 102492 None Item 15.87 Supplying Installing, testing and commissioning of Gun metal Branch pipe size of 63mm dia x19mm dia as per IS 903 complete including cost of materials, labour,usage charges of machinery complete as per specifications. ---- etc., complete with all lead Each 5469.29 5469.29 16.0 False None None False None False 87508.64 0 3037125 102492 None Item 15.89 Supplying Installing, testing and commissioning of Hose cabinet made out of 18 gauge M.S.sheet with double glass door with lacing arrangement and painted with two coats of Fire red Enamel paint at outer ise of the Box and two coats of white enamel paint at inner side of the box is to accomodated 2 Nos. of Fire hose box size 20"x24"x10" complete including cost of materials, labour, usage charges of machinery complete as per specifications. ---- etc., complete with all lead Each 7900.09 7900.09 8.0 False None None False None False 63200.72 0 3037126 102492 None Item 15.9 Supplying Installing, testing and commissioning of Hose reel cabin ---- etc., complete with all lead Each 6198.54 6198.54 8.0 False None None False None False 49588.32 0 3037127 102492 None Item 15.91 Supplying Installing, of M.S. Pressed reel of 600mm dia swinging type motion which allows a 180 swing and conforms to IS:884/85 or Aluminium fitting Single Piece Compact Type. including cost of materials, labour, usage charges of machinery complete as per specifications. ---- etc., complete with all lead Each 6320.08 6320.08 4.0 False None None False None False 25280.32 0 3037128 102492 None Item 15.86 Supplying Installing, testing and commissioning of Gun metal AIR RELEASE VALVE SIZE OF 25mm dia including cost of materials, labour, usage charges of machinery complete as per specifications. complete ---- etc., complete with all lead Each 1823.1 1823.1 2.0 False None None False None False 3646.2 0 3037129 102492 None Item 15.125 SITC of Gun metal BALL VALVE SIZE OF 25mm dia ---- etc., complete as per specificaiton with all lead and lift, loading unloading, labour, hire charges of machineries and all such incidental charges necessary for successful completion of work and as per directions of the Engineer-in-charge of the work ---- etc., complete with all lead Nos 1458.48 1458.48 4.0 False None None False None False 5833.92 0 3037130 102492 None Item 13.37 Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. ---- etc., complete with all lead Nos 380.42 380.42 20.0 False None None False None False 7608.4 0 3037131 102492 None Item 15.93 Supplying Installing, testing and commissioning of approved make 15mm dia sprinkler bulb pendent/wall mounted type designed to operate 68 degrees centegrad Make Tyco/HD FIRE complete (Colour code of bulb liquid inside Glass bulb type Pendents As per IS 9972 57COrange, 68C Red, 79C Yellow, 93C Green, 141C Blue, 182C Mauve, 227/260C - Black) ---- etc., complete with all lead Each 455.77 455.77 400.0 False None None False None False 182308.0 0 3037132 102492 None Item 15.122 Stainless steel braided flexible pipe (hose) for dropping sprinklers below false ceiling, pipe shall be 16 bar pressure rating and 1500 mm long 25 mm dia with union / reducer collar, clamps etc. as required. ---- etc., complete with all lead Each 3038.5 3038.5 50.0 False None None False None False 151925.0 0 3037133 102492 None Item 15.120. Supplying Installing, testing and commissioning of Ceiling Mounted powder coated Surface Finishing Mild Steel Rosette Plate including cost of materials, labour, usage charges of machinery complete as per specifications ---- etc., complete with all lead Each 133.69 133.69 50.0 False None None False None False 6684.5 0 3037134 102492 None Item 15.163 Supply, erection, testing and commissioning of 1" GI/MS collar. ---- etc.,complete with all leads And lifts as per specifications and as directed by the Engineer-in-charge . ---- etc., complete with all lead Nos 133.69 133.69 450.0 False None None False None False 60160.5 0 3037135 102492 None Item 11.16.2 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- etc., complete with all lead Kg 178.66 178.66 1500.0 False None None False None False 267990.0 0 3037136 102492 None Item 15.22 Supply and installation of 2Kg Pressure type, Pressure Guage, Gross Weight 3.7Kg, empty weight 1.7 Kg, Can Height 344MM, Diameter 108MM, Discharge Time less than 8 Sees, Controllable discharge mechanism (Squeeze grip with easy snap safety seal), Range minimum 2 meters, applicable on Class A,8,C and electrically started Fire, 8 Rating 218, Can construction: Deep drawn &Co., Mig welded, valve Construciton: Forging and Mechining, Internal Coating of Can: Epoxy powder coating, External Coating of Can: Epoxy PoIyster power coating, Sheet metal thickness: 2.00 MM, 5 years warranty with instalert system with Superior quality EPDM Rubber Hosepipe etc., including cost cost of supporting materials like MS stand & accessaries if it is fixing n floor / MS brackets & accessories if it is fixing on wall,, labour, usage charges of machinery complete as per specifications. complete IS15683 and CE Approved. ---- etc., complete with all lead Each 7900.09 7900.09 4.0 False None None False None False 31600.36 0 3037137 102492 None Item 15.33 CO2 2Kg Squeeze grip Providing 2 Kg C02 Gas Type Fire Extinugisher Squeeze grip type, used Unused Mechanism, Squeeze Grip, Gross Weight 9.1 Kg. empty Weight 7.1 Kg. Can Height 595MM Diameter 108MM, Discharge Time less than 8 Sees, Controllable discharge mechanism, Applicable on Class 8&C Fire, 8 Rating 88, Can Construction : Hot spinning/Forging, Valve Construction : Forging & Machining, Internal Coating of Can : Not Applicable, External coating of Can : Spray Painting, Sheet metal thickness: 4.0MM lSI Approved, 1 Year Warranty.with instalert system with Superior quality EPDM Rubber Hosepipe etc., including cost of materials, labour, usage charges of machinery complete as per specifications. complete ---- etc., complete with all lead Each 6684.7 6684.7 5.0 False None None False None False 33423.5 0 3037138 102492 None Item 15.4 Providing Aqueous Film-Forming Foam - 9 Ltr Providing 9 Ltr Fire Extinugisher Aqueous Film-Forming Foam Type, Stored Pressure Type, Pressure Gauge, Gross Weight 15.1Okg. empty weight 6.10kg Can Height 615 MM, Diameter 175 MM, Discharge Time less than 60 Sees, Controllable discharge mechanism (Squeeze grip with easy snap safety seal), Range minimum 6 Meters, applicable on Class A,8,CARating 13A, 8 Rating 558, Can Construction;Deep drawn & CO, Mig welded, Valve Construction: Forging & Machining, Internal Coating of Can : Epoxy Powder coating, External Coating of Can : Epoxy PoIyster Powder coating, Sheet metal thickness: 2.0MM, lSI and EN Approved, Helium Leak Detection Tested, 1 Years Warranty with instalert system with Superior quality EPDM Rubber Hosepipe etc., including cost of materials, labour, usage charges of machinery complete as per specifications. complete ---- etc., complete with all lead Each 9844.74 9844.74 2.0 False None None False None False 19689.48 0 3037139 102492 None Item 15.4 Providing ABC Powder based MAP 50, 6Kg:-Providing 6kg Fire Extinguisher Mono Ammonium Phos phate Powder 50, Stored Pressure Type, Pressure Gauge, Gross Weight 9.5 Kg, empty weight 3.5 Kg, Can Height 435MM, Diameter 160MM, Discharge Time less than 9 Sees, Controllable discharge mechanism (Squeeze grip with easy snap safety seal), Range minimum 4 meters, applicable on Class A,8,C and electrically started Fire, A Rating 3A, 8 Rating 218, Can construction : Deep drawn & Co., Mig welded, valve Construciton : Forging and Mechining, Internal Coating of Can: Epoxy powder coating, External Coating of Can: Epoxy PoIyster power coating, Sheet metal thickness: 1.60MM, 5 years Warranty with instalert system with Superior quality EPDM Rubber Hosepipe etc., including cost of materials, labour, usage charges of machinery complete as per specifications. complete. IS 15683 Approved, ---- etc., complete with all lead Each 3463.89 3463.89 5.0 False None None False None False 17319.45 0 3037140 102492 None Item 15.34 Supply, installation in position, testing and commissioning of 4.5Kg C0 Gas Type Fire Extinugisher, Trolley Mounted, 2 Easy Weight Management used Unused Mechanism, Squeeze Grip, Gross Weight 19.1 Kg. empty Weight 14.6 Kg. Can Height 860MM Diameter 140MM, Discharge Time less than13 Sees, Controllable discharge mechanism, Applicable on Class 8&C Fire, 8 Rating 138, Can Constuctin : Hot spinning/Forging, Valve Construction : Forging & Machining, Internal Coating of Can : Not Applicable, External coating of Can : Spray Painting, Sheet metal thickness : 4.5M M lSI Approved 1Year Warranty. with instalert system with Superior quality EPDM Rubber Hosepipe etc., including cost of materials, labour, usage charges of machinery complete as per specifications. complete ---- etc., complete with all lead Each 7900.09 7900.09 5.0 False None None False None False 39500.45 0 3037141 102492 None Item 15.112 Supplying of two bucket stand alongwith buckets. complete ---- etc., complete with all lead Each 1336.93 1336.93 4.0 False None None False None False 5347.72 0 3037142 102492 None Item 15.72 Providing and fixing in position the following type of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut, PVC non-reflective self adhesive vinyl painted foam board, complete with mirror fasteners. Providing's Escape Singage Photoluminescent rigid plastic, 2 mm thickness, Printed on High Quality glass paint with UV resistance, 5 years warranty, Material Used - Non Radiocactive, non-phosphorous, non toxic and lead free. Available in different types & sizes, Time after removing the light source (in minutes) 60 minutes, Luminescent intensity (milicandelas * per square meter - mcd/sqm) : 30 mcd/sqm.Luminescent Intensity greater than 0.32 mcd/sqm, Period of Light Decay* (In Minutes) :3100, including cost of materials, labour, usage charges of machinery complete as per specifications.(Signage with the following text "IN CASE OF FIRE, USE STAIRS UNLESS INSTRUCTED OTHERWISE" Size:-25cm x 30 cm) ---- etc., complete with all lead Sq CM 2.43 2.43 7294.0 False None None False None False 17724.42 0 3037143 102492 None Item 15.106 Providing and fixing in position the signages "FIRE ORDER" it should contain the following text on 3mm thick "Opaque" PVC foam board of computerized cut, PVC non-reflective self adhesive vinyl painted foam board of size 3' x 4'. A) ALERT THE SECURITY AT SECURITY ROOM BY ACTUATING MANUAL CALL POINT LOCATED AT STRATEGIC LOCATIONS. B) EVACUATE THE OCCUPANTS BY USING FIRE EXITS AND EMERGENCY EXITS ONLY AND ASSEMBLE AT VARIOUS ASSEMBLY POITS. C) IF POSSIBLE TRY TO EXTINGUISH THE FIRE BY USING NEAREST / SUITABLE PORTABLE EXTINGUISHER OR WATER FROM NEAREST WET RISER. D) BE CALM AND DO NOT GIVE ANY ROOM FROM PANIC, WALK, DO NOT RUN. E) IF YOU ENCOUNTER SERIOUS DIFFICULTY IN EVACUATION, LIE DOWN FLAT AND TRY TO ATTRACT ATTENTION OF RESCUE TEAM. ---- etc., complete with all lead Each 3038.5 3038.5 4.0 False None None False None False 12154.0 0 3037144 102492 None Item Least Quotation Rate Supply installation testing commissioning of P.A System Rack made out of 18 gauge M.S. Sheet with glass door with locking arrangement and powder coating grey paint two coats at inner and outer of box, is to accomodated 1 No. 250 watt amplifire, 1 No. 40 zone console and 1 no Mike and in built electronic connections circuits.Size or Rack: 0.50 m hight x 0.40 m width x 0.40 m depth ---- including all lead and lift charges loading and unloading charges labour charges, curing, cost& conveyance of all materials, transportation charges, all incidental charges, hire charges of all machinery and equipment required for successful completion of work etc., complete. The work shall be executed as per standard technical specification and directions of Engineer in charge of the work ---- etc., complete with all lead Nos 58410.0 58410.0 1.0 False None None False None False 58410.0 0 3037145 102492 None Item 15.108.3 Supplying Installing, testing and commissioning of P.A.System console panel with push button with speaker and indictoron Accomdated in M.S.Cabinet with painting -do- 40 Zone cansole. Complete ---- etc., complete with all lead Nos 98447.4 98447.4 1.0 False None None False None False 98447.4 0 3037146 102492 None Item 15.109 P.A.System amplifier 250W RMS out put with complete wiring and controls accessable form front ---- etc., complete with all lead Nos 42842.85 42842.85 1.0 False None None False None False 42842.85 0 3037147 102492 None Item 15.110 Supplying Installing, testing and commissioning of MIKE ---- etc., complete with all lead Each 6684.7 6684.7 1.0 False None None False None False 6684.7 0 3037148 102492 None Item 15.107 Supplying Installing, testing and commissioning of Public address system (Two way comminication type) as per requirement of Fire Force authority and which Generally comprise of Supplying Installing, testing and commissioning of Approved make 5W.wall mounted speaker with talk back facility with store enamel painted M.S.Sheet hosing etc. complete including cost of materials, labour, usage charges of machinery complete as per specifications. ---- etc., complete with all lead Each 2977.73 2977.73 2.0 False None None False None False 5955.46 0 3037149 102492 None Item 15.105 Supply & Laying of 2 X 1.5 Sqmm fire alarm armored cable,600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required. ---- etc., complete with all lead m 182.31 182.31 1800.0 False None None False None False 328158.0 0 3037150 102492 None Item 15.66.1 Supply, install, test and commissioning of addressable peer to peer Networkable analogue addressable type fire alarm control panel with minimum 1500 Character /240X64 Pixel / 7inch Touchscreen graphic LCD display. The panel should be equipped with sufficient numbers of loop with 20% spare capacity, with each networkable intelligent fire alarm Control Panel having SLC with capacity of min 126/240 detectors/ devices in any combination with key pad, dual flash-based microprocessor technology, inbuilt USB Port for upload and down load the configuration tools, RS232 serial port for direct PC or modem connection, inbuilt NAC's, min 20 programmable Zonal LEDs and operates on 240V AC + 10% with 50Hz with built in charger. The panel shall have fire, fault relays, option of BMS integration MODBUS/ BACKNET, graphical software for provision of TCP/ IP modules, Remote Access, Class 'X' wiring with provision of both class 'A' and class 'B' wiring in the SLC circuit, user friendly with communication facility to monitor & control the FACPs from a single window. The panel shall be suitable for minimum of 5000 event record facility, event fetch from FACP facility and the single panel shall be suitable for min 2000 fire zones and 200 Panels/ Nodes in one network with all other accessories required to successfully run the system. (The System cost shall be included of all necessary cards, modules, Panel enclosure, CPU and associated accessories to complete the system design). Approval: VDS/UL/EN-54 Std. 2 Loop Panel ---- etc., complete with all lead Each 255234.0 255234.0 2.0 False None None False None False 510468.0 0 3037151 102492 None Item CPWD 17.202 Supply, intallation, testing and Commissioning of Graphical software for entire fire alarm panels including detector configuration, commissioning etc ---- etc., complete with all lead Each 243822.61 243822.61 2.0 False None None False None False 487645.22 0 3037152 102492 None Item Least Quotation Rate Supply, intallation, testing and Commissioning of Network card for fire alram panels integration ---- etc., complete with all lead Each 88500.0 88500.0 2.0 False None None False None False 177000.0 0 3037153 102492 None Item 15.103 Supplying Installing, testing and commissioning of Response Indicator constists of twin LED wioth electronic circutarx work on 24 DC enclose in PVC retangular. complete including cost of materials, labour, HOM complete as per specifications. ---- etc., complete with all lead Each 303.84 303.84 25.0 False None None False None False 7596.0 0 3037154 102492 None Item 15.67 Supply, Installation , Testing & Commissioning  of Network Active Repeater Panel with 1500 Character / 240X64 Pixel / 7inch Touchscreen. The LCD shall Display all events / detectors, devices status of complete systems in the networked.  Approval: UL/VDS/EN54. Make: ---- etc., complete with all lead Each 79001.0 79001.0 1.0 False None None False None False 79001.0 0 3037155 102492 None Item 15.66 Supply, intallation, testing and Commissioning of loop card ---- etc., complete with all lead& lift, as per specifications and as per directions of the Engineer in charge of the work. ---- etc., complete with all lead Each 3403.12 3403.12 2.0 False None None False None False 6806.24 0 3037156 102492 None Item 15.1 Supply Installation testing & Commissioning of conventional type photo/Heat electric smoke sensor with flashing LED capable of woking at 9V to 33 V DC .The Optical Smoke Detector is unaffected by wind or atmosphericpressure and operates over the temperature range 20C to +60C. IP Rating at IP 23D & Approval with EN-54 -7, LPCB Approved. ---- etc., complete with all lead Each 2552.33 2552.33 200.0 False None None False None False 510466.0 0 3037157 102492 None Item Least Quotation Rate SITC OF Fault isolation module:- Supply, Erection,Testing and Commissioning of UL-APPROVED Analog addressable fault isolator circuit modules of wall mounted type with mounting accessories. ---- etc., complete with all lead Each 7080.0 7080.0 10.0 False None None False None False 70800.0 0 3037158 102492 None Item 15.68 Supply, Installation, Testing & Commissioning of Analogue Addressable loop powered Sounder & Beacon  with inbuilt isolator and  having Min 15 distinct sound patterns/ multitone to indicate Exit doors and direct occupants for safe and fast evacuation and 100dB output with minimum 1Hz Frequency flash rate designed for IP65 requirements and approved to operate in 10C to +55C temperature, complies with the essential requirement of the EMC Directive to be supplied with Junction Box, Glands and other mounting accessories for proper installation. (For Detectors/Device without inbuilt isolator, Fault Isolator or Isolator base to be provided with each detector/device) Approval VDS/ UL /EN54. Make Advanced (UK), Simplex, Notifier,Argus(Uk) ---- etc., complete with all lead Each 5955.46 5955.46 2.0 False None None False None False 11910.92 0 3037159 102492 None Item 15.73 Supplying Installing, testing and commissioning of Resettable type Manual Call point . works on 24V DC LED indicator with glass Fronted. Fire Symbol .The red Manual Call Point is approved to EN54-11 standard. MECHANICAL CONSTRUCTION The component parts of the call point are moulded in polycarbonate or ABS, depending on their function. ---- etc., complete with all lead Each 3646.2 3646.2 2.0 False None None False None False 7292.4 0 3037160 102492 None Item 1.4.2 Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.100 x 75 x 65 mm ---- etc., complete with all lead Each 143.41 143.41 200.0 False None None False None False 28682.0 0 3037161 102492 None Item 15.72 Supply, install, test and commissioning of Analogue addressable Monitor Cum Control (Input/Output) module (1+1) with inbuilt relay and isolator with LED indicator, approved to operate in 10C to +55c temperature, complies with the essential requirement of the EMC Directive to be supplied with Junction Box, Glands and other mounting accessories for proper installation. In case of Manufacturer with single Input or Output module need to supply One quantity of each for line item.(For Detectors/Device without inbuilt isolator, Fault Isolator or Isolator base to be provided with each detector/device) Approval: EN54. ---- etc., complete with all lead Each 4740.05 4740.05 2.0 False None None False None False 9480.1 0 3037162 102492 None Item 15.113 SITC of 7AM-12 V Battery for fire alarm system ---- etc., complete with all lead Each 1301.69 1301.69 4.0 False None None False None False 5206.76 0 1710321894000 0 None None Buildings CCU Gadag - HVAC 13417637.77 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3037163 102493 None Item 6.8.4 Supplying of ..... TR Invertor type split Air conditioners suitable for operation on A/C supply single phase 230V/50Hz with hermetically sealed inverter compressor with air cooled condenser, latest R410A / R-32 Refrigerant fan motor, start & run capacitors, relay & over load protector internal unit, with one indoor & one outdoor unit. The condenser unit will be placed outside the room avoid noise including standard length of suitable size copper tubing covered with nitrile rubber insulation tube. Suitable capacity 3 Core sheathed/PVC copper cable and a battery operated wireless remote unit. 1 Ton capacity ---- etc., complete with all lead Nos 57800.77 57800.77 5.0 False None None False None False 289003.85 0 3037164 102493 None Item 6.8.5 Supplying of ..... TR Invertor type split Air conditioners suitable for operation on A/C supply single phase 230V/50Hz with hermetically sealed inverter compressor with air cooled condenser, latest R410A / R-32 Refrigerant fan motor, start & run capacitors, relay & over load protector internal unit, with one indoor & one outdoor unit. The condenser unit will be placed outside the room avoid noise including standard length of suitable size copper tubing covered with nitrile rubber insulation tube. Suitable capacity 3 Core sheathed/PVC copper cable and a battery operated wireless remote unit. 1.5 Ton capacity ---- etc., complete with all lead Nos 68493.86 68493.86 6.0 False None None False None False 410963.16 0 3037165 102493 None Item 6.8.6 Supplying of ..... TR Invertor type split Air conditioners suitable for operation on A/C supply single phase 230V/50Hz with hermetically sealed inverter compressor with air cooled condenser, latest R410A / R-32 Refrigerant fan motor, start & run capacitors, relay & over load protector internal unit, with one indoor & one outdoor unit. The condenser unit will be placed outside the room avoid noise including standard length of suitable size copper tubing covered with nitrile rubber insulation tube. Suitable capacity 3 Core sheathed/PVC copper cable and a battery operated wireless remote unit. 2 Ton capacity ---- etc., complete with all lead Nos 81916.74 81916.74 5.0 False None None False None False 409583.7 0 3037166 102493 None Item 6.9.1 Supply erection, testing, and commissioning of Cassette type split Air conditioners suitable for operation on single/three phase AC supply, hermetically sealed compressor with air cooled condenser motor capacitor start, capacitors run relay and overload protection, one ceiling mounted indoor unit and one outdoor condenser unit including standard accessories covered with insulation tube including battery operated cordless unit. 2.0 TR Cassette 1 Ph ---- etc., complete with all lead Nos 95791.75 95791.75 1.0 False None None False None False 95791.75 0 3037167 102493 None Item 6.10.1 Supply, erection, testing, commissioning of package type Duct able type split Air-Conditioner with microprocessor control, fitted with twin scroll Compressor with R22/Latest Refrigerant. The unit shall be pre-wired to operate on 415V/50Hz AC Supply. The unit shall comprise, Evaporated condenser unit, Indoor-Outdoor Motor Fans, suitable over vent fins made up of Aluminium, Copper Refrigerant coil, Etc.,. complete and corded control unit. 3.0 TR ---- etc., complete with all lead Nos 104288.61 104288.61 1.0 False None None False None False 104288.61 0 3037168 102493 None Item 6.10.2 Supply, erection, testing, commissioning of package type Duct able type split Air-Conditioner with microprocessor control, fitted with twin scroll Compressor with R22/Latest Refrigerant. The unit shall be pre-wired to operate on 415V/50Hz AC Supply. The unit shall comprise, Evaporated condenser unit, Indoor-Outdoor Motor Fans, suitable over vent fins made up of Aluminium, Copper Refrigerant coil, Etc.,. complete and corded control unit. 5.5 TR ---- etc., complete with all lead Nos 137472.67 137472.67 2.0 False None None False None False 274945.34 0 3037169 102493 None Item 6.10.3 Supply, erection, testing, commissioning of package type Duct able type split Air-Conditioner with microprocessor control, fitted with twin scroll Compressor with R22/Latest Refrigerant. The unit shall be pre-wired to operate on 415V/50Hz AC Supply. The unit shall comprise, Evaporated condenser unit, Indoor-Outdoor Motor Fans, suitable over vent fins made up of Aluminium, Copper Refrigerant coil, Etc.,. complete and corded control unit. 8.5 TR ---- etc., complete with all lead Nos 197603.37 197603.37 1.0 False None None False None False 197603.37 0 3037170 102493 None Item 6.12 Installation charges for split type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable angle iron support upto 3.0 Ton split/cassette type A/C. ---- etc., complete with all lead Nos 3858.89 3858.89 16.0 False None None False None False 61742.24 0 3037171 102493 None Item 6.13.1 Supplying and installation of insulated refrigerant copper tubing of 5/8" and 3/8" with polythene foam insulation 3 core 80 stand copper wiring between indoor and outdoor unit leak testing oil and gas charging for additional piping length of tube. Split ---- etc., complete with all lead m 1882.65 1882.65 60.0 False None None False None False 112959.0 0 3037172 102493 None Item 6.13.2 Supplying and installation of insulated refrigerant copper tubing of 5/8" and 3/8" with polythene foam insulation 3 core 80 stand copper wiring between indoor and outdoor unit leak testing oil and gas charging for additional piping length of tube. Cassette ---- etc., complete with all lead m 1992.04 1992.04 15.0 False None None False None False 29880.6 0 3037173 102493 None Item 6.25.1 Supply, fabrication and installation of GI Ducting Along with flanges, supports & all fixing materials. 24 Gauge ---- etc., complete with all lead Sqm 2201.08 2201.08 900.0 False None None False None False 1980972.0 0 3037174 102493 None Item 6.25.2 Supply, fabrication and installation of GI Ducting Along with flanges, supports & all fixing materials. 22 Gauge ---- etc., complete with all lead Sqm 2577.86 2577.86 10.0 False None None False None False 25778.6 0 3037175 102493 None Item 6.26 Supply and installation of Thermal insulation using 13mm nitrile rubber for return air ducts. ---- etc., complete with all lead Sqm 1447.54 1447.54 750.0 False None None False None False 1085655.0 0 3037176 102493 None Item 6.27 Supply and installation of Tarpaulin canvas between the AC duct and AC evaporator unit including accessories. ---- etc., complete with all lead Nos 5547.08 5547.08 11.0 False None None False None False 61017.88 0 3037177 102493 None Item 6.29.1 Supply and installation of Powder coated aluminium diffusers of size 595x595mm for supply & return air. Aluminium Diffusers ---- etc., complete with all lead Nos 6171.8 6171.8 220.0 False None None False None False 1357796.0 0 3037178 102493 None Item 6.29.2 Supply and installation of Powder coated aluminium diffusers of size 595x595mm for supply & return air. Collar Dampers ---- etc., complete with all lead Nos 3189.2 3189.2 100.0 False None None False None False 318920.0 0 3037179 102493 None Item 6.29.3 Supply and installation of Powder coated aluminium diffusers of size 595x595mm for supply & return air. GI Mixing Box ---- etc., complete with all lead Nos 7626.63 7626.63 20.0 False None None False None False 152532.6 0 3037180 102493 None Item 6.29.4 Supply and installation of Powder coated aluminium diffusers of size 595x595mm for supply & return air. Flexible Duct Per Mtr ---- etc., complete with all lead Nos 2056.45 2056.45 20.0 False None None False None False 41129.0 0 3037181 102493 None Item 6.30.2 Supply and fixing of powder coated extruded aluminium grill suitable for supply/return air including all fixing hardware etc.,. Complete. 6" Extruded aluminium grille with 15 deg to 30 deg louvers. ---- etc., complete with all lead m 2068.61 2068.61 30.0 False None None False None False 62058.3 0 3037182 102493 None Item 5.1 Supplying push button operated direct online starter with anantiweld silver cadmium oxide contactor with replaceable fixed and moving contacts and bimetallic thermal overloadrelay help in anticorrosion treated sheet steel or iron clad enclosure and fixing the same to suitable capacity wires for230/440 V 1/3 phase motor upto 5 HP. ---- etc., complete with all lead Nos 2342.07 2342.07 11.0 False None None False None False 25762.77 0 3037183 102493 None Item MR Supply, Installation, Testing and Commissioning of Customized Double Skin Horizontal Ceiling Mounted type Air Handling Units with Thermal Break profile. (Direct Expansion (DX) refrigerant to air evaporator coils, as applied with condensing units with necessary KIT) Sandwitched between 0.8 precoated GI (outer skin) shall be pre coated and 0.8 Plain GI (inner skin) double skin (48 2 mm) insulated with CFC free polyurethane foam (PUF) panels of 40 Kg/cum density. AHU frame works shall be of pre cast vertical and horizontal extruded thermal break aluminium profile with three way corner frame sections. Food grade self adhesive coated neoprene gasket to be provided between panels and structure of the AHU to ensure the entire housing is airtight. DIDW centrifugal belt driven backward Aerofoil curved impeller fans (Efficiency with 75%) (AMCA Certified) to be supplied along with motor.The outlet velocity will not exceed 9.5 m/sec. Vibration isolatator to fans and motor to avoid transmission of vibration. AHRI Certified DX Cooling coils shall be of minimum 6/8 Row deep or as per computer coil selections which ever is greater. Face Velocity across the coils should not exceed 500 FPM (2.5m/s) (Note : DX Cooling Coil should be Hydrophlic blue aluminium fines.) The AHU unit shall be complete with external DX type condensing unit, complete in all respects, inclusive of complete working charge of R410a/134a Chlorofluorocarbons (CFC) environmentally free refrigerant.Drain tray for DX cooling coils shall be made of single sheet of SS 304-20G grade stainless steel sheet and should have uniform slope from all sides leading to drain connection. Drain Pan shall be insulated with 19mm thick, 55kg/cum density closed cell elastomeric insulation. Each unit filters section shall be provided with a factory assembled filter section containing washable synthetic with 50mm thick panel type Pre-Filter of MERV 8 (EU-4)- 90% down to 10 microns. (1 set of spare & 1 set of commissioning pre filters should be consider) and Fine-Filter of MERV 13 (EU-7) 97% down to 3 microns. The Motor shall be of TEFC, IP-65 protected, IE-3, Class 'F' insulation, suitable for 3 phase, 415 volts, 50hz power supply. Motor shall be VFD compatible and induction type. Costing is inclusive of Canvas connection made of self extinguishing, moisture resistant flexible fabric to be provided between AHU outlet flange and the supply duct / plenum, communication cable as specfied by manufacturer and Lifting, Shifting & Positioning with MS L angle base frame structure duly black painted with synthetic epoxy paint for all outdoor units. Wiring and earthing, vacuum cleaneing, gas charging, pressure testing and etc… are in part of HVAC Vendor scope.Safety interlock switch for fan operation to controle heater on/off to be provided by the AHU manufacturer. Note : Costing is inclusive of Necessary DX type condensing out door units to AHU interface Expansion Connecting Kit (PCB with EEV) & Control Control Panel with sensors, thermostat and etc.., Corded Remote controller for AHU's to precisely control the flow of refrigerant for temperature control. 3.0 TR / 1,200 CFM with 50 TSP - 1.1 Kw (approx) for CSU's and 1x3.0 - Condensing units with necessary KIT ---- etc., complete with all lead Nos 173460.0 173460.0 2.0 False None None False None False 346920.0 0 3037184 102493 None Item MR 5.5 TR / 2,200 CFM with 50 TSP - 1.5 Kw (approx) for CSU's and 1x5.5 - Condensing units with necessary KIT ---- etc., complete with all lead Nos 265972.0 265972.0 2.0 False None None False None False 531944.0 0 3037185 102493 None Item MR 6.5 TR / 1,500 CFM with 50 TSP - 1.1 Kw (approx) for CSU's and 1x8.5 - Condensing units with necessary KIT ---- etc., complete with all lead Nos 303850.0 303850.0 1.0 False None None False None False 303850.0 0 3037186 102493 None Item MR 8.5 TR / 3,400 CFM with 50 TSP - 1.5 Kw (approx) for CSU's and 1x8.5 - Condensing units with necessary KIT. ---- etc., complete with all lead Nos 362260.0 362260.0 3.0 False None None False None False 1086780.0 0 3037187 102493 None Item MR Supply, Installation, Testing and Commissioning of Double Skin Horizontal Ceiling/Floor Mounted Cabinet type Fresh air Units Sandwitched between 0.6 precoated GI (outer skin) shall be pre coated and 0.6 Plain GI (inner skin) double skin (23 2 mm) insulated with CFC free polyurethane foam (PUF) panels of 40 Kg/cum density. with DIDW centrifugal belt driven backward curved Aerofoil impeller fans (Efficiency with 75%) (AMCA Certified) to be supplied along with motor. Vibration isolatator to fans and motor to avoid transmission of vibration, Motor, Pulleys, Belts & Belt guard, Pre-Filter of MERV 8 (EU-4)- 90% down to 10 microns. Drive sets, base frame, spring mounts, Limit switches, Marine lamp, Inspection door and all necessary accessories.Blower Make - Nicotra / Kruger. The unit shall be suitable for outdoor application with necessary weather hood, canopy and supports with necessary MS channels & threaded rods. The Motor shall be of TEFC, IP-55 protected, IE-3, Class 'F' insulation, suitable for 3 phase, 415 volts, 50hz power supply. Motor shall be VFD compatible and induction type. VFD starter panel cost quantified separately (Cost excluded for the same).Costing is inclusive of Factory fabricated non-cloth type Fire retardant flexible connection made of high quality self extinguishing, moisture resistant flexible fabric with matching angle flanges between Fresh air units outlet flange and the connected plenum or ducts. 1,350 CFM / 40 mm TSP / 1.1 kW (approx) ---- etc., complete with all lead Nos 47790.0 47790.0 1.0 False None None False None False 47790.0 0 3037188 102493 None Item MR Supply, Installation, Testing and Commissioning of Double Skin Horizontal Ceiling/Floor Mounted Cabinet type Fresh air Units Sandwitched between 0.6 precoated GI (outer skin) shall be pre coated and 0.6 Plain GI (inner skin) double skin (23 2 mm) insulated with CFC free polyurethane foam (PUF) panels of 40 Kg/cum density. with DIDW centrifugal belt driven backward curved Aerofoil impeller fans (Efficiency with 75%) (AMCA Certified) to be supplied along with motor. Vibration isolatator to fans and motor to avoid transmission of vibration, Motor, Pulleys, Belts & Belt guard, Pre-Filter of MERV 8 (EU-4)- 90% down to 10 microns. Drive sets, base frame, spring mounts, Limit switches, Marine lamp, Inspection door and all necessary accessories.Blower Make - Nicotra / Kruger. The unit shall be suitable for outdoor application with necessary weather hood, canopy and supports with necessary MS channels & threaded rods. The Motor shall be of TEFC, IP-55 protected, IE-3, Class 'F' insulation, suitable for 3 phase, 415 volts, 50hz power supply. Motor shall be VFD compatible and induction type. VFD starter panel cost quantified separately (Cost excluded for the same).Costing is inclusive of Factory fabricated non-cloth type Fire retardant flexible connection made of high quality self extinguishing, moisture resistant flexible fabric with matching angle flanges between Fresh air units outlet flange and the connected plenum or ducts. 2,000 CFM / 40 mm TSP / 1.5 Kw (approx) ---- etc., complete with all lead Nos 70800.0 70800.0 2.0 False None None False None False 141600.0 0 3037189 102493 None Item MR Supply, Installation, Testing and Commissioning of Double Skin Horizontal Ceiling/Floor Mounted Cabinet type Exhaust Units Sandwitched between 0.6 precoated GI (outer skin) shall be pre coated and 0.6 Plain GI (inner skin) double skin (23 2 mm) insulated with CFC free polyurethane foam (PUF) panels of 40 Kg/cum density. with DIDW centrifugal belt driven backward curved Aerofoil impeller fans (Efficiency with 75%) (AMCA Certified) to be supplied along with motor. Vibration isolatator to fans and motor to avoid transmission of vibration, Motor, Pulleys, Belts Belt guard, HEPA Filter 99.99% down to 0.03 microns. Drive sets, base frame, spring mounts, Limit switches, Marine lamp, Inspection door and all necessary accessories..Blower Make - Nicotra / Kruger. The unit shall be suitable for outdoor application with necessary weather hood, canopy and supports with necessary MS channels & threaded rods. The Motor shall be of TEFC, IP-55 protected, IE-3, Class 'F' insulation, suitable for 3 phase, 415 volts, 50hz power supply. Motor shall be VFD compatible and induction type. VFD starter panel cost quantified separately (Cost excluded for the same).Costing is inclusive of Factory fabricated non-cloth type Fire retardant flexible connection made of high quality self extinguishing, moisture resistant flexible fabric with matching angle flanges between Fresh air units outlet flange and the connected plenum or ducts. 1,800 CFM / 70 mm TSP / 2.2 kW (approx) ---- etc., complete with all lead Nos 84960.0 84960.0 1.0 False None None False None False 84960.0 0 3037190 102493 None Item MR Supply, Installation, Testing & Commissioning of Rectangular / Circular inline fan with variable speed regulator with suitable for installing in any position in vertical or horizontal ducts. All accessories like fan, motor, flanges, non-canvass type fire retardant flexible connections, etc., The impeller shall be of forward type. The motor should be of IP21, class 'B' insulation suitable for operating at 1phase, 230V, 50hz power supply. Note : Rectangular / Circular inline fan shall have low sound level exceeding not more than 40 dBA at 1 meter distance. Note: Costing is inclusive of Factory fabricated non-cloth type Fire retardant flexible connection made of high quality self extinguishing, moisture resistant flexible fabric with matching angle flanges between Fresh/Exhaut air units outlet flange and the connected plenum or ducts. 300 CFM / 20mm TSP. ---- etc., complete with all lead Nos 12390.0 12390.0 2.0 False None None False None False 24780.0 0 3037191 102493 None Item MR Supply, installation, testing and commissioning of Interconnecting Soft drawn / Hard drawn Refrigerant copper Piping with insulation with UV protection coating. Note: a) To protect Nitrile rubber insulation of outdoor installed copper piping from degradation due to ultra violet rays and atmospheric condition. b) UV protection coating on existing copper pipes (with insulation) shall be done with the help of starbond and 7mm cloth etc. UV protection coating shall be done on all the pipes irrespective of size of pipes work duly insulated with 13mm & 19mm thick elastomeric nitrile rubber type tubular insulation between VRV/VRF/DX Type indoor & outdoor units. Note : a) Costing is inclusive of necessary supports & supporting rods, saddles at 1m interval. b) Refrigerant copper Piping quantity (Rmt) to be estimated before finalization of order or receipt of work order as per the drawing and take necessary amendment if any variation in the quantity. c) Actual measurement of Refrigerant copper Piping quantity (Rmt) should be taken as per site condition only. 1/4" (6.35 mm) X 21 Swg (0.8 mm) - Soft drawn (Insulation = 13mm thick) ---- etc., complete with all lead m 1416.0 1416.0 110.0 False None None False None False 155760.0 0 3037192 102493 None Item MR 3/8 (9.52 mm) X 21 Swg (0.8mm) Soft drawn (Insulation 13mm thick) ---- etc., complete with all lead m 1475.0 1475.0 110.0 False None None False None False 162250.0 0 3037193 102493 None Item MR 1/2(12.7 mm) X 21 Swg (0.8 mm) - Soft drawn (Insulation 13mm thick) ---- etc., complete with all lead m 1652.0 1652.0 240.0 False None None False None False 396480.0 0 3037194 102493 None Item MR 5/8 (15.9 mm) X 19 Swg (1 mm) - Soft drawn (Insulation = 13mm thick) ---- etc., complete with all lead m 1829.0 1829.0 60.0 False None None False None False 109740.0 0 3037195 102493 None Item MR 7/8( 22.2 mm) X 19 Swg (1 mm) - Hard drawn (Insulation = 19mm thick) ---- etc., complete with all lead m 2006.0 2006.0 100.0 False None None False None False 200600.0 0 3037196 102493 None Item MR 1 1/8 (28.6 mm) X 19 Swg (1 mm) - Hard drawn (Insulation = 19mm thick) ---- etc., complete with all lead m 2242.0 2242.0 80.0 False None None False None False 179360.0 0 3037197 102493 None Item MR Supply, Installation, Testing & Commissioning of Open cell "Class-1" Nitrile rubber Insulation for Duct Acoustics insulation with Ultrafresh Antimicrobial protection as per ASTM G21, ASTM G22, UL-181 and E2180 , Density 140-180Kg / m3, UL94 approved (HBF, HF 1 & HF 2) in accordance to UL 94,1996. Thermal conductivity 0.047 W / MK at 20 Deg C, Air Erosion Resistance test Confirming to ASTM Standard C 1071-05 (section 12.7).  Moisture resistant-joining tapes of 2 inches width with self adhesive to be supplied with the insulation material by the supplier. Use Low Voc Adhesive. (Adhesive VOC level as per LEED requirement) Note - if the adhesive is not self adhiesive type then the glue should be used with the same manufacturer. 15mm Thick ---- etc., complete with all lead Sqm 1298.0 1298.0 160.0 False None None False None False 207680.0 0 3037198 102493 None Item MR Supply, Installation, Testing & Commissioning of Closed cell Class-O Nitrile rubber Insulation with Factroy Laminated Alu-foil with Ultrafresh Antimicrobial protection with both side skin/smooth surface, As per ASTM G21, ASTM G22, UL181 and E2180.  Class O IMO A 653 (16), FM Global, UL 94 EPA  approved,with Density 4060kg m3. Temperature of 50 to 116 Deg C and As per EN12667(DIN 52612). Thermal conductivity of 0.036 W / m K 0 deg C. Water vapour permeability as per EN12086 (DIN 52615) , Moisture Resistance Factor 7000. Aluminum foil tape of 75mm width should be used to seal the joints with self adhesive tape (Black Cotton Tape not acceptable). Use Low Voc Adhesive. (Adhesive VOC level as per LEED requirement) Material shall be FM approved and preferred color shall be Black. Note - if the adhesive is not self adhiesive type then the glue should be used with the same manufacturer. Note: Costing is inclusive of necessary support like cup and washer with scaffolding arrangements to install the underdeck insulation. 25mm Thick (Under Deck Insulation) ---- etc., complete with all lead Sqm 1062.0 1062.0 950.0 False None None False None False 1008900.0 0 3037199 102493 None Item MR Supply, Installation, Testing & Commissioning of Fire damper with opposed blade (Fusible link type). Fire damper as per UL 555, outer shell constructed with 1.6mm thick galvanized steel frame and the blade/Leaf with 1.6mm thick GSS and with necessary flanges for connection. The damper shall be of 90 min fire rating with Fusible Link & spring mechanism the damper shall be held open by a replaceable fusible link rated at 74 deg C.(Area calculation : (L x B) ---- etc., complete with all lead Sqm 15340.0 15340.0 5.0 False None None False None False 76700.0 0 3037200 102493 None Item MR Supply, Installation, Testing & Commissioning of Quadrant type Volume controle Damper (VCD). The volume control damper shall be of low leakage type with the outer shell constructed of 1.6mm thick galvanized steel frame and the blade/Leaf with 1.6mm thick GSS and with necessary flanges for connection etc.,(Area calculation : (L x B) ---- etc., complete with all lead Sqm 9440.0 9440.0 7.0 False None None False None False 66080.0 0 3037201 102493 None Item MR Supply, Installation, Testing & Commissioning of Back draft damper (BDD). The Back draft damper with the outer shell constructed of 1.6mm thick galvanized steel frame and the blade/Leaf with 1mm thick aluminum and with necessary flanges for connection and as per specifications.(Area calculation : (L x B) ---- etc., complete with all lead Sqm 10620.0 10620.0 1.0 False None None False None False 10620.0 0 3037202 102493 None Item MR Supply, Installation, Testing & Commissioning of Butterfly Damper GI Constructed Single Flap with round flange on one side and 10mm grove on other side for fixing of flexible duct with the help of band. 20G GI constructed self lubricated bronze Bushes and 1.6mm flange.250 dia ---- etc., complete with all lead Nos 2360.0 2360.0 20.0 False None None False None False 47200.0 0 3037203 102493 None Item MR Supply, Installation, Testing & Commissioning of Extruded Aluminum powder coated Exhaust air Disc valves/grille without volume control dampers for Pantry. a) Note: Colour shall be as per the False ceiling or Architect intent.150 mm Dia ---- etc., complete with all lead Nos 1475.0 1475.0 20.0 False None None False None False 29500.0 0 3037204 102493 None Item MR Supply, installation, testing and commissioning of Extruded Al. Powder coated Fresh air / Exhaust air louvers with slimline blade (3 mm nominal thickness) grille height 16 mm, blade pitch 12.5 mm and blade angle 0/15 degree deflection without damper and with end flanges. Note: Colour shall be as per the False ceiling or Architect intent. ---- etc., complete with all lead Sqm 10620.0 10620.0 3.0 False None None False None False 31860.0 0 3037205 102493 None Item MR Supply, Installation, Testing and Commissioning of Aluminium Collar Damper of opposed blade type aluminum extruded construction black anodized dampers. (Used in supplay air) ---- etc., complete with all lead Sqm 7670.0 7670.0 2.0 False None None False None False 15340.0 0 3037206 102493 None Item MR Supply, Installation, Testing & Commissioning of Condensate CPVC drain piping with insulated with 6mm Nitrile rubber insulation including elbows, connectors, U traps, Y-connections and flexible tubing for all indoor units to the nearest drain points / toilet drain / pantry drain / HVAC shaft available as per approved shop drawings or site conditions and as per directions of the Consultant and Architect. The quote should inclusive of all Hardware necessary to secure the pipes. 40 mm dia ---- etc., complete with all lead m 590.0 590.0 85.0 False None None False None False 50150.0 0 3037207 102493 None Item MR Supply, Installation, Testing & Commissioning of Condensate CPVC drain piping with insulated with 6mm Nitrile rubber insulation including elbows, connectors, U traps, Y-connections and flexible tubing for all indoor units to the nearest drain points / toilet drain / pantry drain / HVAC shaft available as per approved shop drawings or site conditions and as per directions of the Consultant and Architect. The quote should inclusive of all Hardware necessary to secure the pipes. 32 mm dia ---- etc., complete with all lead m 531.0 531.0 30.0 False None None False None False 15930.0 0 3037208 102493 None Item MR Supply, Installation, Testing & Commissioning of Condensate CPVC drain piping with insulated with 6mm Nitrile rubber insulation including elbows, connectors, U traps, Y-connections and flexible tubing for all indoor units to the nearest drain points / toilet drain / pantry drain / HVAC shaft available as per approved shop drawings or site conditions and as per directions of the Consultant and Architect. The quote should inclusive of all Hardware necessary to secure the pipes. 25 mm dia ---- etc., complete with all lead m 413.0 413.0 160.0 False None None False None False 66080.0 0 3037209 102493 None Item MR Supply, Installation, Testing & Commissioning of Drain Pumps for CHW/VRV/VRF/DX Type Hi-Wall Units and Ceiling Mounted Units. Mini Blanc Pumps (External) for Hi-Wall units. (Max. flow 12L/h & Head is 10Met) ---- etc., complete with all lead Nos 8850.0 8850.0 16.0 False None None False None False 141600.0 0 3037210 102493 None Item MR Mini Tank Pump (Less then 5.0 TR CSU/FCU) - (Max. flow 35L/h & Head is 15Met) ---- etc., complete with all lead Nos 10620.0 10620.0 3.0 False None None False None False 31860.0 0 3037211 102493 None Item MR Max Hi-Flow (Above 5.0 TR CSU/FCU) - (Max. flow 550L/h & Head is 5Met) ---- etc., complete with all lead Nos 12980.0 12980.0 9.0 False None None False None False 116820.0 0 3037212 102493 None Item MR Supply, Installation, Testing & Commissioning of Duct type Strip heater (For Customized AHU's) with nessacery electrical wiring and connection. Incoming power supply from respactive Starter panel. (Used in Winter season to achiev the room Temp) Heater bank & Duct befer and after the Heater bank should be panted in RED for 150mm on either side of the Heater bank. 1.5 Kw ---- etc., complete with all lead Nos 8260.0 8260.0 10.0 False None None False None False 82600.0 0 3037213 102493 None Item MR Supply, Installation, Testing & Commissioning of Duct type Strip heater (For Customized AHU's) with nessacery electrical wiring and connection. Incoming power supply from respactive Starter panel. (Used in Winter season to achiev the room Temp) Heater bank & Duct befer and after the Heater bank should be panted in RED for 150mm on either side of the Heater bank. 3.0 Kw ---- etc., complete with all lead Nos 11800.0 11800.0 15.0 False None None False None False 177000.0 0 3037214 102493 None Item MR Supply, Installation, Testing & Commissioning of Magnehelic Differential Pressure Gages (IP-67 enclosure) to Indicate Positive, Negative or Differential, Accurate within 1%. Note: Pressures must be less than 35 psi.Mounting Orientation:Diaphragm in vertical position. Consult factory for other position orientations. Costing is inclusive of with necessary fittings and Pitot Tube and etc.. AHU/CSU Filter Section ---- etc., complete with all lead Nos 11210.0 11210.0 8.0 False None None False None False 89680.0 0 3037215 102493 None Item MR Supply, Installation, Testing & Commissioning of Duct Type Temperature & RH Sensors (IP40 enclosure) (Immersion depth 230 mm) with all mounting accessories to measure the Return Air temperatures. (Temperature range : -0C to 55C & R.H. range 10% to 90%) Note : Used for AHU's, CSU's FCU's & Cassette units. ---- etc., complete with all lead Nos 10030.0 10030.0 8.0 False None None False None False 80240.0 0 3037216 102493 None Item MR Supply, Installation, Testing & Commissioning of Room Type Temperature & RH Digital Sensors (Thermostats) with all mounting accessories to measure the critical Room air temperatures. (Temperature range : -20C to 60C & R.H. range 0% to 99%) ---- etc., complete with all lead Nos 10030.0 10030.0 8.0 False None None False None False 80240.0 0 3037217 102493 None Item MR Supply, installation, testing and commissioning of Electrical Power & Controle cabling for AC units, Ventilation & Pressurization fans units. Note : a) Costing is inclusive of necessary supports & supporting rods, saddles at 1m interval. b) Electrical Power cabling quantity (Rmt) to be estimated before finalization of order or receipt of work order as per the drawing and take necessary amendment if any variation in the quantity. c) Actual measurement of Electrical Power cabling quantity (Rmt) should be taken as per site condition only. 3.0 Core x 2.5 Sqmm - For AHU/CSU/Ventilation units units. (Can be used up to 3.7 Kw / 3Phase) Flexible Cross-linked polyethylene (XLPE) insulated Armoured copper cables (FRLS) Control & Power cable to connect HVAC or Electrical starter panel to respective HVAC equipment. ---- etc., complete with all lead m 472.0 472.0 255.0 False None None False None False 120360.0 0 1710321894000 0 None None Buildings CCU Gadag - Modular OT 11919529.52 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3037218 102494 None Item Approved Rate Providing and fixing 50 mm thick prefabricated walkable stainless steel panels ceiling The panel should have a composite construction of two skins, one side stainless steel 304 grade 0.8 mm thick and other side sheet is PPGI sheet of 0.6 mm thick. And these two sheets are held together with aluminum ‘w’ section of 48mm x 10.2mm for frame work and inner space between two sheets is filled with Puff insulation with density of 40KG per Cubic meter. The panel size should be 1.20Mts x 3.00 Mtrs. The stainless steel surface should be brush / MAT finish with antiglare property. The false ceiling panels are designed in such way that to fit within each other. There shall be minimum joints. If joints are necessary the panels will be jointed each other by using aluminum ‘H ‘ section 29 mm x 42 mm for interlock system. And all panel joints will be sealed by using compressible food grade silicon sealent to ensure air tight vapor tight construction. The false ceiling shall be walkable with provision of service panel. The false ceiling should be fixed to the concrete slab by using 8mm treaded tension bars with adjustable turn buckles, fastener, nuts, bolts etc., complete to the concrete slab. Coving: Providing corner joint coving for wall to wall used to provide smooth and seamless corner coving buffed aluminium extruded profile R75 ‘C’ cap, L section profile, ‘Z’ section profile. The required size cut outs for fixing of lights and also for any other services shall be made. The cost includes the cost of all materials, labour charges for fixing, transportation, lead, lift and etc., complete. The works shall be carried out as per the directions of the Engineer in charge. Note: The panel should be free from scratches and dents MODULAR OT area to8 mtr X6 mtr apprxt. Say 50.00 Sqm ---- etc., complete with all lead Sqm 10354.5 10354.5 100.0 False None None False None False 1035450.0 0 3037219 102494 None Item Approved Rate Providing and fixing 50 mm thick prefabricated stainless steel wall panels. The panel should have a composite construction of two skins, one side stainless steel 304 grade 0.8 mm thick and other side sheet is PPGI sheet of 0.6 mm thick and these two sheets are held together with aluminum W section size 48mm x 10.2mm for frame work and inner space between two sheets is filled with Puff insulation with density of 40KG per Cubic meter. The panel size should be 1.20Mts x 3.00 Mtrs. The stainless steel surface should be brush / MAT finish with antiglare property. The wall panels are designed in such way that to fit within each other. There shall be minimum joints. If joints are necessary the panels will be jointed each other by using aluminum H section 29 mm x 42 mm for interlock system. And all panel joints will be sealed by using compressible food grade silicon to ensure air tight vapour tight construction. Coving:Providing corner joint coving used to provide smooth and seamless corner coving buffed Aluminium extruded profile R75 ‘C’ cap, L section profile, ‘Z’ section profile. The covings shall be provided wall to wall, wall to ceiling, wall to floor. The required size cut outs for fixing of control panel and switch plate shall be made. The cost includes the cost of all materials, labour charges for fixing, transportation, lead, lift etc., complete. The works shall be carried out as per the directions of the Engineer in charge. Note: The panel should be free from scratches and dents 6 mtr X 3 mtr X2 Nos. =36 Sqmtr 8 mtr X 3 mtr X2 Nos. =48 Sqmtr Say 84.00 Sqm Door area will be detected form wall panel ---- etc., complete with all lead Sqm 10354.5 10354.5 168.0 False None None False None False 1739556.0 0 3037220 102494 None Item Approved Rate Supplying and Fixing STAINLESS STEEL DOOR Providing, fabrication and fixing of Stainless steel door with openable shutter of suitable size. The Door frame section of 50mm x 100mm size is made out of 1.2mm thick Stainless steel sheet of 304 grade. The door shutter of 42 to 45 mm thick by using 0.8mm thick stainless sheet of 304 grade for both sides and the surface of the steel should be MAT finish with antiglare property and having composite construction and the space b/w two sheets is filled with Puff insulation with 40 kg/cum density shall be used to ensure air tight and vapour tight construction. Door shall be provided with automatic drop seal at bottom of door, sealed with high quality neoprene sealing gasket in all edges. The doors are provided with vision panel in double toughened glass size 300mm x 300mm,6mm thick. All accessories including heavy duty SS ball bearing butt door hinges, SS 304 grade handlesto 02 sets, heavy duty door closure, SS concealed Tower Bolt, etc are all approved make. The cost includes the cost of all materials, labour charges for fixing, transportation, lead, lift etc., complete. The works shall be carried out as per the directions of the Engineer in charge. Srub Door /Dirty utility Door single leaf 1 mtr X 2.10 mtr Say 2.10 Sqmtr ---- etc., complete with all lead Sqm 53843.39 53843.39 4.2 False None None False None False 226142.238 0 3037221 102494 None Item Approved Rate Supplying and Fixing HERMATICALLY SEALED STAINLESS STEEL SLIDING DOOR Providing, fabrication and fixing of manually operated hermetically sealed stainless steel sliding door of size1500 x 2100mm. The door shutter of 42 to 45 mm thick by using 0.8mm thick stainless sheet of 304 grade for both sides and the surface of the steel should be MAT finish with antiglare property and having composite construction and the space b/w two sheets is filled with Puff insulation with 40 kg/cum density shall be used to ensure air tight and vapour tight construction. The sliding Door runs on Nylon wheel within an Aluminium extrusion high quality rail complete with required accessories. The door track is constructed from an aluminium extrusion, fixed firmly to the wall. Door shall be provided with automatic drop seal at bottom of door, sealed with high quality neoprene sealing gasket in all edges. The doors are provided with vision panel in double toughened glass size 300mm x 300mm,6mm thick. All accessories including SS 304 grade handlesto 02 sets, SS concealed Tower Bolt, etc., Complete are all approved make. The cost includes the cost of all materials, labour charges for fixing, transportation, lead, lift etc., complete. The works shall be carried out as per the directions of the Engineer in charge. ---- etc., complete with all lead Sqm 96585.36 96585.36 7.0 False None None False None False 676097.52 0 3037222 102494 None Item Approved Rate Antistatic Epoxy Flooring : Providing and laying 4mm thick antitostatic, antitofungal and antitobacterial epoxy flooring after preparing the floor surface by removing all loose particles, dirt by using coir brush and vacuum cleaner. Applying one coat of Moisture barrier primer and then applying selftoleveling 2mm thick moisture barrier layer to capture the moisture of the existing flooring. Then the anti static grid is laid with conductive granules and copper strips. Then apply one coat of epoxy based primer and allow for dry 6to 8 hours. Then apply epoxy putty and allow for dry 6 8 hours. And then apply 2 mm thick selftoleveling epoxy flooring of approved make, colour and shade. The Epoxy flooring should be impact resistance, chemical resistance including abrasion and fumigation with R75mm coving wall to wall, wall to flooring etc., The cost includes cost of material, labour, transportation etc., complete. The works shall be carried out as per the directions of the Engineer in charge. ---- etc., complete with all lead Sqm 3835.0 3835.0 108.0 False None None False None False 414180.0 0 3037223 102494 None Item Approved Rate Supplying and Fixingof 2'x2' LED recessed luminarie with…. Watts system wattage. Housing shall be with pressure die cast aluminium alloy with corrosion proof resistant polyester powder coated. Driver operates with voltage range from 100v to 270V 50/60 Hz with short circuit, overload and mistowring protection. Lumen maintenance of 70percent at 50000 Hrs. injection moulded poly carbonate diffuser for better mechanical stability, light transmission and avoid pot hole effect. Junction temperature shall be 70 degree Celsius. Driver is on constant current driver at 0.06A with PF 0.9, line voltage at 50Hz, driver efficiency 85percent and THD15percent. LED Efficiency 130 Im/W and Fixture Efficiency 75lm/w with CRI 75 with injection moulded Polycarbonate lens with 8mm depth. 5 years Warranty against any manufacturing defect working under standard electrical condition.] ---- etc., complete with all lead Each 9725.56 9725.56 16.0 False None None False None False 155608.96 0 3037224 102494 None Item Approved Rate Supplying and Fixing LED to XtoRay Viewing Screen :XtoRAY VIEWING SCREEN: to Two Plate XtoRay View Screen with flicker free illumination having imported LED system for uniform illumination and operated by Xtoray film. The system having electrical safety codes for high and Low voltage system. The X ray viewing screen shall be concealed with wall panel. ---- etc., complete with all lead Each 33040.0 33040.0 2.0 False None None False None False 66080.0 0 3037225 102494 None Item Approved Rate Supplying and Fixing Magnetic Writing List Board:Magnetic Writing Board of size 940 x 640 x 50 mm comprises of a flush mounted, 1.50 mm thick, white laminate board, bonded to a 10 mm high density fibre board sheet for additional rigidity. Magnetic Writing List Board shall be concealed with wall panel. ---- etc., complete with all lead Each 6903.0 6903.0 2.0 False None None False None False 13806.0 0 3037226 102494 None Item Approved Rate Plenum Laminar Flow : Supply and installation of Stainless steel 304 grade Plenum LAMINAR FLOWto Plan air Ceiling mounted system with unidirectional airflow,Air flow velocity of 25 to 35 FPM Plenum unit, Holding structure and Top plenum are conforming to DIN 4799 / EU14 Mini pleate HEPA filter standards for the air distribution system complete with provision for 6 Nos. Size 1220mmX610mmX90mm thick HEPA Filters efficiency 99.97percent down to 0.3 micron , 4000 cfm. The Plenum size is 1800 x 2400mm. The Diffuser is made out of SS 304 Grade material for laminar of filtered air. The complete unit will have factory prepared fine sealing system. It will be perfectly seamless. It will be made out of SS 304 Sheet of required thickness With perforated SS 304 sheet with etc., complete. ---- etc., complete with all lead Each 312700.0 312700.0 2.0 False None None False None False 625400.0 0 3037227 102494 None Item Approved Rate Supplying and Fixing STAINLESS STEEL STORAGE UNIT:Providing and supplying Storage Unit of size 800x1900x350 mm has made of 0.8.mm thick SS304 grade sheet. The exterior openable glass doors shall be made by using 6mm thick toughened glass with lockable and magnetic pushtobutton for easy opening. Removable toughened glass shelves of thickness 6 mm will be provided with the storage units. ---- etc., complete with all lead Each 70800.0 70800.0 2.0 False None None False None False 141600.0 0 3037228 102494 None Item Approved Rate Supplying and Fixing PASS/HATCH BOX:Providing and fixing Hatch box for modular OT in stainless steel SS 304, SS Handles, SS Hinges, View window, Door close/open indication, Electromagnetic door interlocking system based on Microcontroller electronic system for disposal of dirty linen/waste to nontosterile store.Size 600mm x 600mm x 600mm with double door inter lock and consisiting of UV lamp, UV lamp on for both door closed, UV lamp off for any door open, CF lamp on any door is open CF lamp off both door closed including cost of conceted accessories. ---- etc., complete with all lead Each 76700.0 76700.0 2.0 False None None False None False 153400.0 0 3037229 102494 None Item Approved Rate Supplying and Fixing OT control Panel 6 Tile : Supply and installation of 6 tile OT control panel with distribution box, control panel will be mounted flush in the theatre wall, comprising of the following 1. Medical gas card 2. Laminar Air flow controls Temperature and humidity indicators, filter status, temperature and humidity control. 3. Digital elapsed timer 4. Hand free phone 5. Digital day timer clock 6. Lighting control panel ---- etc., complete with all lead Each 129800.0 129800.0 2.0 False None None False None False 259600.0 0 3037230 102494 None Item Approved Rate Providing and fixing SS304 grade return air grill. The cut out for return air grill size in panel is 600mmX450mm. The cost includes cost of material, labour charges for fixing etc complete. ---- etc., complete with all lead Each 4130.0 4130.0 8.0 False None None False None False 33040.0 0 3037231 102494 None Item Approved Rate SUPPLY ERECTION TESTING and COMISSIONING of Return air riser made out of SS 304 grade with 18 SWG in the clean room area of 1000 CFM and provision for return air collar damper anf grill with all concted accessories. ---- etc., complete with all lead Each 21240.0 21240.0 8.0 False None None False None False 169920.0 0 3037232 102494 None Item Approved Rate Supplying and Fixing Providing and making trap door of size 600 x 600mm in the ceiling panel by cutting. The required frame work shall be made by using Aluminium sections. The cost includes cost of material, labour charges for fixing etc complete. ---- etc., complete with all lead Each 7375.0 7375.0 2.0 False None None False None False 14750.0 0 3037233 102494 None Item Approved Rate AHU's RECYCLE SYSTEM FOR OT AREA AS PER NABH NORMS SUPPLY ERECTION TESTING and COMISSIONING Air handling units of GSS powder coated sheet metal cabinet type Double skin Recirculatory type 40to45 mm thick,Thermal break,modular construction.Air handling units shall be complete with Backward curved blower having capacity of 3500 t0 4000 cfm Minimum 25 to 35 ACPH with 125 mm capacity, 3.75kw TEFC motor,fan motor drive filter section with 10 microns pre filter,3 microns fine filters, DX coil 6 row section of copper coil with aluminium fins,Mist eleminator, inlet and outlet volume control dampers and bypass dampers with access doors and accessories including 10percent Fresh air with module with console type and grill, 20 Microns Fresh air filter. 10percent Bleed module with hepa filter,damper and grille, View glass, View lamp, limit switch for door and Pressure port for filter sections and provision to fix pressure port to measure the pressure drop across the filter, EFF1 Motor coil should be 5. 5 TR x 2 circute with all concted accessories. ---- etc., complete with all lead No 597788.0 597788.0 2.0 False None None False None False 1195576.0 0 3037234 102494 None Item Approved Rate AIR COOLED CONDENSER UNIT and COPPER PIPING SUPPLY ERECTION TESTING and COMISSIONING 5.5 TR Air cooled out door condensing units comprising of semi tohermetic / hermetic reciprocating/scrool compressors with matching air cooled condenser suitable for 3500 to 4000 CFM AHU provided with necessary controls.like Thermostart , Draier with MS painted stand ---- etc., complete with all lead No 146320.0 146320.0 4.0 False None None False None False 585280.0 0 3037235 102494 None Item Approved Rate GRILLE and DAMPER SUPPLY ERECTION TESTING and COMISSIONING Collar damper made out of Al. with powder coated as per return air openinig size ---- etc., complete with all lead Sqm 10384.0 10384.0 4.0 False None None False None False 41536.0 0 3037236 102494 None Item Approved Rate SUPPLY ERECTION TESTING and COMISSIONING Aluminium Volume control dampers manual operated, Only for hepa module, unit mouth and branch Ducts ---- etc., complete with all lead Sqm 13924.0 13924.0 4.0 False None None False None False 55696.0 0 3037237 102494 None Item Approved Rate SUPPLY ERECTION TESTING and COMISSIONING Fire Dampers with Fusible Links rated for 72C for AHU mouth, with fire damper actuator with inter link with AHU controll panel in case of fire AHU motor should stop. ---- etc., complete with all lead No 6254.0 6254.0 2.0 False None None False None False 12508.0 0 3037238 102494 None Item Approved Rate SUPPLY ERECTION TESTING and COMISSIONING Fire retardant flexible connections for AHU supply and return air mouth ---- etc., complete with all lead No 5546.0 5546.0 4.0 False None None False None False 22184.0 0 3037239 102494 None Item Approved Rate DUCTING and INSULATION SUPPLY ERECTION TESTING and COMISSIONING Al. ducting including the supports,selicon sealent with painted MS angle flanges.22 guage ---- etc., complete with all lead Sqm 2006.0 2006.0 320.0 False None None False None False 641920.0 0 3037240 102494 None Item Approved Rate SUPPLY ERECTION TESTING and COMISSIONING Supply and return air duct Insulation with factory laminated Al. foil class 'O' grade 13 mm thk for return air duct ---- etc., complete with all lead Sqm 920.4 920.4 160.0 False None None False None False 147264.0 0 3037241 102494 None Item Approved Rate SUPPLY ERECTION TESTING and COMISSIONING Supply and return air duct Insulation with factory laminated Al. foil class 'O' grade 19 mm thk for supply air duct ---- etc., complete with all lead Sqm 1097.39 1097.39 180.0 False None None False None False 197530.2 0 3037242 102494 None Item Approved Rate Polishield covering with two coats paint for exposed duct ---- etc., complete with all lead Sqm 1038.39 1038.39 140.0 False None None False None False 145374.6 0 3037243 102494 None Item Approved Rate SUPPLY and Fixing 300 dia Insulated flexible connection for grille module and return air raiser ---- etc., complete with all lead m 979.4 979.4 40.0 False None None False None False 39176.0 0 3037244 102494 None Item Approved Rate 25 mm PVC dia drain piping with supports for AHUs ---- etc., complete with all lead m 625.4 625.4 100.0 False None None False None False 62540.0 0 3037245 102494 None Item Approved Rate ELECTRICAL and CONTROLLS: SUPPLY ERECTION TESTING and COMISSIONING Ele.controll panel inter lock with AHUs and 5.5 TR 2 nos condenser unit with TEMP. and RH Controller For AHU ---- etc., complete with all lead Set 12272.0 12272.0 2.0 False None None False None False 24544.0 0 3037246 102494 None Item Approved Rate SUPPLY ERECTION TESTING and COMISSIONING 4 Kw Ele. Heater with RH controller to controll humidity of 50 to 60percent ---- etc., complete with all lead Set 66788.0 66788.0 2.0 False None None False None False 133576.0 0 3037247 102494 None Item Approved Rate Supplying and drawing flexble multicore cable manufactured with electroytic grade copper with flexible copper conductor confirming to table 3 class 5 of IS:8130to1984 and PVC insulation and sheathed suitable for working voltage upto 1100 Volts as per ISto694:1990 and confirming to GTP 4C X 6 Sqmm ---- etc., complete with all lead m 218.29 218.29 120.0 False None None False None False 26194.8 0 3037248 102494 None Item Approved Rate Supplying and drawing flexble multicore cable manufactured with electroytic grade copper with flexible copper conductor confirming to table 3 class 5 of IS:8130to1984 and PVC insulation and sheathed suitable for working voltage upto 1100 Volts as per ISto694:1990 and confirming to GTP 4C X 4 Sqmm ---- etc., complete with all lead m 177.0 177.0 120.0 False None None False None False 21240.0 0 3037249 102494 None Item Approved Rate Supplying and drawing flexble multicore cable manufactured with electroytic grade copper with flexible copper conductor confirming to table 3 class 5 of IS:8130to1984 and PVC insulation and sheathed suitable for working voltage upto 1100 Volts as per ISto694:1990 and confirming to GTP 4C X 2.5 Sqmm ---- etc., complete with all lead m 123.89 123.89 60.0 False None None False None False 7433.4 0 3037250 102494 None Item Approved Rate Supplying and drawing flexble multicore cable manufactured with electroytic grade copper with flexible copper conductor confirming to table 3 class 5 of IS:8130to1984 and PVC insulation and sheathed suitable for working voltage upto 1100 Volts as per ISto694:1990 and confirming to GTP 8C X 2.5 Sqmm S.R. ---- etc., complete with all lead m 348.09 348.09 60.0 False None None False None False 20885.4 0 3037251 102494 None Item Approved Rate Supplying and drawing flexble multicore cable manufactured with electroytic grade copper with flexible copper conductor confirming to table 3 class 5 of IS:8130to1984 and PVC insulation and sheathed suitable for working voltage upto 1100 Volts as per ISto694:1990 and confirming to GTP 4C X 10 Sqmm ---- etc., complete with all lead m 348.09 348.09 60.0 False None None False None False 20885.4 0 3037252 102494 None Item Approved Rate SUPPLY and Fixing Cable trey 300 width x 50 ht perforated P. No.63 Item No.7.19.2 ---- etc., complete with all lead m 645.45 645.45 60.0 False None None False None False 38727.0 0 3037253 102494 None Item Approved Rate Plate COpper Earthing strip 24 x 3 mm connected to existing earthing P.55 Item No.7.3.6 ---- etc., complete with all lead m 617.14 617.14 100.0 False None None False None False 61714.0 0 3037254 102494 None Item Approved Rate SUPPLY and FIXING DP Gauge range 0 to 6 mm wg for OT room to monitoring positive pressure ---- etc., complete with all lead Nos 10089.0 10089.0 2.0 False None None False None False 20178.0 0 3037255 102494 None Item Approved Rate DSUPPLY and FIXING DP Gauge range 0 to 50 mm wg for AHU and EAU pre and fine filter section to monitoring pressure drop in the filters ---- etc., complete with all lead Nos 9735.0 9735.0 4.0 False None None False None False 38940.0 0 3037256 102494 None Item Approved Rate Supplying and Fixing Single Arm Rotating OT Pendant: Single ARM 320 Deg Rotating Anesthesia Pendant Complete with Electrical Outlets 8 Nos, Data Points 1 Nos and Medical Gas Outlets 7 Nos, 1 Monitor Tray, 2 Nos. Shelfs, 2 Nos I V Stand Note: 2 SET of DOCUMENTS and VALIDATION AT REST AS PER ISOto14644 and NABH standard to be submitted, Design Qualification, Installation Qualification, Operational Qualification, Performance Qualification Air velocity test, Air changes test, Air qty.check test, Temp. and RH test, DOP test for Hepa filter, Partical count test Class 100, ISO to 5in the termial , Air flow pattern test, Recovery test, Majot materil test certificates ---- etc., complete with all lead Nos 194700.0 194700.0 2.0 False None None False None False 389400.0 0 3037257 102494 None Item Approved Rate Supply , installation, testing and commissioning Double arm moveable pendant for surgeon with connected accessories. The Pendants shall comply with NFPA 99C/HTM 02to01/DIN/EN/ISO 7396to1 as amended up to the last date of receipt of tenders. The support arms shall be extremely robust and revolve on high quality bearings, so that the pendant head glides smoothly and quickly to any desired position. Double moveable arms any combination with total coverage of min 1800 mm and minimum 330 Each arm shall have ability of horizontal movement. Vertical movement shall be motorized and the arm height shall remain at a height greater than 6.5 feet above floor level. Weight carrying capacity of the arm shall not be less than 180 kg. It shall have electromagnetic/pneumatic brakes. Each arm shall be capable of minimum 330 of rotation, which can be easily adjusted to suit the desired mode of operation. The pendant shall be European CE Certified with 4 digit notified body number/US FDA/ETL/UL/BIS certified/listed under medical devices directive. The Pendant Service Heads shall be modular with minimum 800mm head.The heads shall be capable of accepting a range of shelves, infusion poles, electrical switch/sockers, gas outlets and other required accessories. The Pendant Heads shall support the range of Physiological Monitor Mounting Solutions. The Pendant Service Heads shall be supplied with medical gas terminal units and 5A/15A or 6A/16 A hybrid sockets. Pendant shall be supplied with outlets and probes as mentioned below. Oxygen Outlets to2 nos , Medical Air Outlets 4 bar to1 no,Vacuum Outlets to2 nos ,Air7bar outletsto01 no, CO2 outletsto01 nos, Electrical Socketsto10 no, Adjustable shelf with two rails one on each side to3 no, Data socket RJto45 to2 nos, IV Fluid Pole with 2 hooks to1 no, Pole shall be capable of stacking 4 syringe pumps, Nitrous oxide outletsto1 no. Pendent shall provide cuttoouts for patch panel in integrated OTs only for integrated OTs. Surgeon pendant shall have NIST connection for all gases to conncet the MGPLS system. ---- etc., complete with all lead Nos 430700.0 430700.0 2.0 False None None False None False 861400.0 0 3037258 102494 None Item Approved Rate Scrub Station MOT SCRUB STATION minimum size 1500 mm supply , installation and commissioning of compact surgical scrub sink shall be designed for use in OT area for pretoprocedural scrub. Double sink combination shall be provided. Fabricated from heavy gauge type 304 stainless steel minimum thicknes 1.5 mm and shall be of seamless welded construction, polished to a satin finish.With a front access panel which shall be easily removable for access to the water controlled valve, waste connections, stoppers and strainers. Hands free operation shall include infratored sensors with programmable adjustment. .Thermostatic mixing, valve control shall be located behind the access panel and it shall maintain constant water temperature.Timing shall be adjustable to meet individual application requiements.built in with timer setting from 1 to 10 micIt shall be provided with infrared sensors, thermostatic control taps with fail safe temprerature controls. All units shall have reduced antitosplash fronts.Knee/foot operated switch shall be provided additionally with all connected accessories. ---- etc., complete with all lead Nos 278480.0 278480.0 2.0 False None None False None False 556960.0 0 3037259 102494 None Item Approved Rate Supply , installation, testing and commissioning OT surgical Lighting system with connected accessroies MOT surgical lighting system shall provide an ideal combination of brightness, manoeuvrability and shadow resolution without sacrificing colour and accuracy through a consistent LED technology. Such lighting system shall have the following technical specifications: a Number of light heads : Two b Rotation system : 360 c Colour temperature range : 3800K to 5000 K 10percenttovariable colour temperature. d CRI : 93 Ra. e LED's : Low temp . 3 Colours combination. f LED bulb life : 50,000 hrs. g Field size diameter : 20 to 28 cm 10percent h Working range : 750 to 1100 mm 10percent i Focus : Adjustable 100mmto250mm. j Illumination leve l: minimum 160,000 lux both for major dome and minor dome separately. k Controls : control panel two:one on the wall and other on dome/ digital with wireless remote. l Power supply : 220 V/ 50Hz AC. ---- etc., complete with all lead Nos 413118.0 413118.0 2.0 False None None False None False 826236.0 0 1710321894000 0 None None Buildings CCU Gadag - LIFT 7009236.04 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3037260 102495 None Item 14.4.6 Design, supplying, erecting testing and commissioning of - 20Passenger/ Bed-cum-passenger hospital lift(3 stops/3 Opening) with speed of 1mtr per second, variable voltage variable frequency drive, with or without machine room for the available well size, operating at 415 V 3 phase 50 cycles AC supply, powder coated / Stainless Steel car entrance doors enclosures with suitable colour vinyl flooring, LED car illumination, emergency light, intercom and fan as desired by the user, central opening / side opening door with or without attendant operation, 7 segment display buttons, call register indicator, fireman drive, SS handrails inside car, full length infrared curtain in car door, automatic rescue device with batteries, voice announcing in regional/ international languages, Braille buttons with one year warranty and maintenance with necessary scaffolding and minor civil works like fixing of guide rail, counter weight etc.,The total product and services shall adhere to IS 14665/2016 ( with latest amendments) part/section 1 to 5 with regards to general guidelines of fire safety rated doors, MRLL beams, pressure switch, manual change over for doors during emergency, ARD of 10 times with sufficient battery back up and standard dimensions of chair car and door openings for all sizes and capacities of lifts including fitness certificate and duly observing all other safety norms prescribed and adhere to CPWD specifications, PCB Norms, National Electricity Code (NEC), NBC-2016, IEC and Karnataka State Lifts, Escalators and Passengers Conveyers Act 2012 and Rules 2014. The Supplier shall be registered in Government Electrical Inspectorate in the State of Karnataka. ---- etc., complete with all lead Each 3504618.02 3504618.02 2.0 False None None False None False 7009236.04 0 1710321894000 0 None None Buildings CCU Gadag -UPS, TELEPHONE AND NET-WORKING, CCTV SYSTEM AND NURSE CALL SYSTEMS 6260892.58 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3037261 102496 None Item Least Quotation Rate Supply, Installation Testing and commissioning of double convertsion, DSP Based, True on line 2 x30KVA Modular type UPS system with 415V +/- 15% V,50Hz,3Ph Input & 415V+/-1%, 50 Hz ,3Ph Output, With Output 0.9 PF, working on 16 Bit microprocessor Architecture,Isolation transformers, RS 232 ports, monitoring software , O/L, SC. protections & self diagnostic features, LCD Display Panel for Functions & all parameters, complying with IEC standards. Convertors, Invertors & Battery Charger shall utilize PWM technology with IGBT. Battery Back up time of 15 minutes back up on 60kva load with required VRLA SMF individual Battery bank System(65AH-32 Nos each Battery Bank) housed in suitable Cabinet /Rack, Static ByPass, complete with Internal wiring & all accessories to be provided. The System shall have in-built P.F.correction & shall ensure THD as per latest International standards. The efficiency of UPS shall be 96% or more. ---- etc., complete with all lead Each 1631940.0 1631940.0 1.0 False None None False None False 1631940.0 0 3037262 102496 None Item 3.6.13 RJ45/ I.O. outlet Cat 6 ---- etc., complete with all lead Each 409.58 409.58 132.0 False None None False None False 54064.56 0 3037263 102496 None Item 3.6.12 Telephone socket ---- etc., complete with all lead Each 189.6 189.6 50.0 False None None False None False 9480.0 0 3037264 102496 None Item 8.1 Supplying and drawing UTP-CAT 6E LAN cable. ---- etc., complete with all lead m 46.18 46.18 2500.0 False None None False None False 115450.0 0 3037265 102496 None Item 8.10.1 Supplying & Fixing of I/O Socket with back box Single I/O ---- etc., complete with all lead Each 595.54 595.54 50.0 False None None False None False 29777.0 0 3037266 102496 None Item 8.4.6 Supplying & Fixing of switch mounting rack with power manager & Cable manager as per standard specification 24U with 650mm depth ---- etc., complete with all lead Each 38146.54 38146.54 2.0 False None None False None False 76293.08 0 3037267 102496 None Item 8.9.11 Supplying fixing of Network Switches. 16 port 10/100/1000 Switch ---- etc., complete with all lead Each 7827.17 7827.17 1.0 False None None False None False 7827.17 0 3037268 102496 None Item 8.9.10 Supplying fixing of Network Switches. 24 port 10/100/1000 Switch ---- etc., complete with all lead Each 9012.19 9012.19 1.0 False None None False None False 9012.19 0 3037269 102496 None Item 8.11.1 Supplying & fixing of ..mtrs. Cat 6Patch Cable. 2Mtr ---- etc., complete with all lead Each 312.35 312.35 50.0 False None None False None False 15617.5 0 3037270 102496 None Item 8.12.3 Supplying & Fixing of Patch panel for Lan Cabling. 16 Port 10/100 patch panel ---- etc., complete with all lead Each 3706.97 3706.97 1.0 False None None False None False 3706.97 0 3037271 102496 None Item 8.12.5 Supplying & Fixing of Patch panel for Lan Cabling. 24 Port 10/100 patch panel ---- etc., complete with all lead Each 9601.66 9601.66 2.0 False None None False None False 19203.32 0 3037272 102496 None Item 8.2.2 Supplying and drawing PVC flexible 2 pair telepone unarmoured tinned copper cable. ---- etc., complete with all lead m 25.52 25.52 2000.0 False None None False None False 51040.0 0 3037273 102496 None Item 8.2.4 Supplying and drawing PVC flexible 4 pair telepone unarmoured tinned copper cable. ---- etc., complete with all lead m 42.53 42.53 200.0 False None None False None False 8506.0 0 3037274 102496 None Item 8.13.1 Supplying and fixing of MDF krone junction box with KRONE Module / Telephone cable termination. 10 Pair ---- etc., complete with all lead Each 419.31 419.31 4.0 False None None False None False 1677.24 0 3037275 102496 None Item 8.13.2 Supplying and fixing of MDF krone junction box with KRONE Module / Telephone cable termination. 20 Pair ---- etc., complete with all lead Each 465.49 465.49 3.0 False None None False None False 1396.47 0 3037276 102496 None Item 8.13.4 Supplying and fixing of MDF krone junction box with KRONE Module / Telephone cable termination. 50 Pair ---- etc., complete with all lead Each 766.91 766.91 2.0 False None None False None False 1533.82 0 3037277 102496 None Item Least Quotation Rate Supply,laying & Termination of Telephone Wires/ Cables as per DOT spcn,with solid annealed Cu Conductor of 0.5mm thick, High Density Polyethylene insulated,Twisted pair,unarmoured ,with outer sheath of low density Polyetylene - 10 pair 0.5mm unarmoured telephone cable ---- etc., complete with all lead m 179.35 179.35 400.0 False None None False None False 71740.0 0 3037278 102496 None Item Least Quotation Rate Supply,laying & Termination of Telephone Wires/ Cables as per DOT spcn,with solid annealed Cu Conductor of 0.5mm thick, High Density Polyethylene insulated,Twisted pair,unarmoured ,with outer sheath of low density Polyetylene - 30 pair 0.5mm unarmoured telephone cable ---- etc., complete with all lead m 230.1 230.1 200.0 False None None False None False 46020.0 0 3037279 102496 None Item Least Quotation Rate EPABX:- Supply,Installation,Testing & Commissioning of micro-processor based, state of the Art, Telephone PBX System , IP READY,based on Linux/GRUB compliant, integrated Software for multiTasking for Hospitality Services including Billing ,comprising of items as below but not limited to them. Expanadable upto 50 Ports Providing PRI cards for Trunk lines / for tie line with reqd.software 16Analog Trunk Lines 4 Digital Extensions 20 Analogue Extensions( Expandable up to 50) In-Built Voicemail ( 4 Port & 80 Min) LAN Connectivity Embedded WELCOME MESSAGE Least Cost Routing Personal Assistant Music on Hold . ---- etc., complete with all lead Nos 295000.0 295000.0 1.0 False None None False None False 295000.0 0 3037280 102496 None Item Least Quotation Rate TELEPHONES Analog push button telephone with Caller ID, flash andradial ---- etc., complete with all lead Nos 2124.0 2124.0 50.0 False None None False None False 106200.0 0 3037281 102496 None Item Least Quotation Rate 42 U Network cum Server Rack Assembly, Floor Mounting, made of Aluminium Channels equivalent to Euro Rack System with side and rear panels made of Powder Coated sheet steel, front transparent persplex door and with rails, rollers with fans will be provided at the top for ventilation. ---- etc., complete with all lead Nos 47200.0 47200.0 2.0 False None None False None False 94400.0 0 3037282 102496 None Item 1.2.2.. Supplying heavy gauge PVC conduit pipe 25mm dia 2mm thick thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2) ---- etc., complete with all lead m 94.8 94.8 2000.0 False None None False None False 189600.0 0 3037283 102496 None Item 3.6.11 TV socket ---- etc., complete with all lead Each 189.6 189.6 5.0 False None None False None False 948.0 0 3037284 102496 None Item Least Quotation Rate The Scope of work is Supply,istallation, Testing for T.V. System with following Items & components in Rooms & other Specific Areas. It also covers co-ordination with T.V service provider for completeness & usage of the Items /components erected by Vendor.Booster amplifier. ---- etc., complete with all lead Each 3540.0 3540.0 4.0 False None None False None False 14160.0 0 3037285 102496 None Item Least Quotation Rate The Scope of work is Supply,istallation, Testing for T.V. System with following Items & components in Rooms & other Specific Areas. It also covers co-ordination with T.V service provider for completeness & usage of the Items /components erected by Vendor. 3 way splitter. ---- etc., complete with all lead Each 236.0 236.0 8.0 False None None False None False 1888.0 0 3037286 102496 None Item 8.3 Supplying and drawing PVC insulated gas injected physical foam jelly flooded co-axial TV cable.RG-6. ---- etc., complete with all lead m 53.47 53.47 300.0 False None None False None False 16041.0 0 3037287 102496 None Item Least Quotation Rate IP DOME CAMERAS-Supplying, installation, testing and commissioning of SITC of 1/2.82 Megapixel Progressive CMOS,1920x1080(2MP),2.7mm13.5mm,F1.4,Motorized, with a min illumination of 0.05lux/F1.4[color,30IRE]0Lux/F1.4(IRon),30M IR distance, BLC/HLC/WDR(120db),min 2streams,compression should be H.265/H. 264H/MJPEG,128GB SD card,ONVIF Profiles,profile G&Q,POE camera,operating temperature of 60 degrees.All the cameras should have CE,FCC,UL,IP66,IK10.The prices should include the necessary mounts and brackets. ---- etc., complete with all lead Each 23836.0 23836.0 14.0 False None None False None False 333704.0 0 3037288 102496 None Item Least Quotation Rate IP BULLET CAMERAS-Supplying, installation, testing and commissioning of SITC of 1/2.8*2 Megapixel Progressive CMOS,1920x1080(2MP),2.7mm13.5mm,F1.4,Motorized, with a min illumination of 0.05lux/F1.4[color,30IRE]0Lux/F1.4(IRon),60M IR distance, BLC/HLC/WDR(120db),min 2streams,compression should be H.265/H. 264H/MJPEG,128GB SD card,ONVIF Profiles,profile G&Q,POE camera,operating temperature of 60 degrees.All the cameras should have CE,FCC,UL,IP66,IK10.The prices should include the necessary mounts and brackets. ---- etc., complete with all lead Each 25606.0 25606.0 4.0 False None None False None False 102424.0 0 3037289 102496 None Item Least Quotation Rate Supplying, installation, testing and commissioning of SITC of complete 32 channel 4K embedded network video recorder,up to 12MP(4K) resolution live view,preview,and play back,full POE Support (for up to 16 channels),internal storage supports 8HDDs expandable up to 64TB (8TB each),operating temperatures(-10 degree C) and (55 degree C),UL,CE,FCC. ---- etc., complete with all lead Each 271400.0 271400.0 2.0 False None None False None False 542800.0 0 3037290 102496 None Item Least Quotation Rate Supply and Installation of 4 TB Survalance Hard Disk The rate shall include all mounting accessories complete as required ---- etc., complete with all lead Each 17110.0 17110.0 8.0 False None None False None False 136880.0 0 3037291 102496 None Item Least Quotation Rate Supply and Installation of 24 Port L2 Managed Poe Switch The rate shall include all mounting accessories complete as required ---- etc., complete with all lead Each 33630.0 33630.0 2.0 False None None False None False 67260.0 0 3037292 102496 None Item Least Quotation Rate Supply and Installation of 43"LED Monitor The rate shall include all mounting accessories complete as required ---- etc., complete with all lead Each 70800.0 70800.0 4.0 False None None False None False 283200.0 0 3037293 102496 None Item 8.1 Supplying and drawing UTP-CAT 6E LAN cable ---- etc., complete with all lead m 46.18 46.18 600.0 False None None False None False 27708.0 0 3037294 102496 None Item 1.2.2 Supplying heavy gauge PVC Consealed conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary. 25mm dia 2mm thick ---- etc., complete with all lead m 94.8 94.8 350.0 False None None False None False 33180.0 0 3037295 102496 None Item 8.12.2 Supplying & Fixing of Patch panel for LAN cabling .24 Port 10/100 patch panel ---- etc., complete with all lead Each 4983.14 4983.14 4.0 False None None False None False 19932.56 0 3037296 102496 None Item 8.4.4 Supplying & Fixing of switch mounting rack with power manager & Cable manager 12U with 450mm depth ---- etc., complete with all lead Each 10301.73 10301.73 2.0 False None None False None False 20603.46 0 3037297 102496 None Item 8.4.6 Supplying & Fixing of switch mounting rack with power manager & Cable manager 24U with 650mm depth ---- etc., complete with all lead Each 38146.54 38146.54 2.0 False None None False None False 76293.08 0 3037298 102496 None Item Least Quotation Rate Supply and Installation of Micro controller based Indication wall Mount panel With the following facilities: 3 Digit room display Reset switch Relay logic switch Voice recording module Mute switch Battery management circuit Wall mounting type enclosure RS 485 networking chord The rate shall include all mounting accessories complete as required ---- etc., complete with all lead Nos 130328.64 130328.64 10.0 False None None False None False 1303286.4 0 3037299 102496 None Item Least Quotation Rate Supply and Installation of Call unit with Switches like Membrane Type Call Switches with bell indicator LED Indicator Membrane Type Reset Switch Compatible for hand held call unit Mounted On Standard electrical 2 module plate near the Bed ---- etc., complete with all lead Nos 4121.5 4121.5 75.0 False None None False None False 309112.5 0 3037300 102496 None Item 8.1 Supplying and drawing UTP-CAT 6E LAN cable ---- etc., complete with all lead m 46.18 46.18 1000.0 False None None False None False 46180.0 0 3037301 102496 None Item 1.2.2 Supplying heavy gauge PVC Consealed conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary. 25mm dia 2mm thick ---- etc., complete with all lead m 94.8 94.8 800.0 False None None False None False 75840.0 0 3037302 102496 None Item 8.12.2 Supplying & Fixing of Patch panel for LAN cabling .24 Port 10/100 patch panel ---- etc., complete with all lead Each 4983.13 4983.13 2.0 False None None False None False 9966.26 0 1710321894000 0 None None Buildings CCU Gadag - External Electrification and DG Set. 4916143.0 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3037303 102497 None Item 1.01 Supply RCC Pole - 9 Mtr Long, 145 Kg WL as per IS- 785 ---- etc., complete with all lead Set 8600.17 8600.17 2.0 False None None False None False 17200.34 0 3037304 102497 None Item 2.02 Erection of RCC Pole - 9 Mtr Long, 145 Kg WL as per IS- 785 ---- etc., complete with all lead Set 1352.74 1352.74 2.0 False None None False None False 2705.48 0 3037305 102497 None Item 6.05 Supply of 11 kV, 45 KN Polymeric Insulator ---- etc., complete with all lead Nos 105.73 105.73 12.0 False None None False None False 1268.76 0 3037306 102497 None Item 13.12 Erection of 11 kV, 45 KN Polymeric Insulator ---- etc., complete with all lead Nos 58.33 58.33 12.0 False None None False None False 699.96 0 3037307 102497 None Item 2.16 Supply of Spiral Earth Electrode ---- etc., complete with all lead Nos 290.48 290.48 4.0 False None None False None False 1161.92 0 3037308 102497 None Item 2.16 Erection of Spiral Earth Electrode ---- etc., complete with all lead Nos 113.03 113.03 4.0 False None None False None False 452.12 0 3037309 102497 None Item 68.17 Supply and fixing of Caution/Danger Board ---- etc., complete with all lead Nos 182.31 182.31 2.0 False None None False None False 364.62 0 3037310 102497 None Item 4.02 Supply of Anti Climbing Device (12 Mtr GI Barbed Wire ---- etc., complete with all lead Each 108.17 108.17 4.0 False None None False None False 432.68 0 3037311 102497 None Item 5.09 Erection of Anti Climbing Device (12 Mtr GI Barbed Wire ---- etc., complete with all lead Each 51.04 51.04 4.0 False None None False None False 204.16 0 3037312 102497 None Item 24.05 Supply and fixing of 11 kV, 400 Amps Double Break GOS ---- etc., complete with all lead Set 25839.4 25839.4 2.0 False None None False None False 51678.8 0 3037313 102497 None Item 24.07 Supply and fixing of H-Frame for mounting GOS ---- etc., complete with all lead Nos 7378.69 7378.69 2.0 False None None False None False 14757.38 0 3037314 102497 None Item 25.01 Supply of DOLO Cut Out Set/3 Nos ---- etc., complete with all lead Set 7140.47 7140.47 2.0 False None None False None False 14280.94 0 3037315 102497 None Item 13.01 Erection of DOLO Cut Out Set/3 Nos ---- etc., complete with all lead Set 288.04 288.04 2.0 False None None False None False 576.08 0 3037316 102497 None Item 19.01 Supply of 9 kV, 5 kA Lightning Arrester Metal Oxide Ceramic type with GROUND DISCONNECTOR (Dwg No. BESCOM/GM/QS&S/26 Dtd 24.10.2007) ---- etc., complete with all lead Nos 1118.16 1118.16 2.0 False None None False None False 2236.32 0 3037317 102497 None Item 13.06 Installation of Lightning arreste r Set (3 Nos) ---- etc., complete with all lead Set 144.63 144.63 2.0 False None None False None False 289.26 0 3037318 102497 None Item 1.01 Supply RCC Pole - 9 Mtr Long, 145 Kg WL as per IS- 785 ---- etc., complete with all lead Set 8600.17 8600.17 6.0 False None None False None False 51601.02 0 3037319 102497 None Item 2.02 Erection of RCC Pole - 9 Mtr Long, 145 Kg WL as per IS- 785 ---- etc., complete with all lead Set 1352.74 1352.74 6.0 False None None False None False 8116.44 0 3037320 102497 None Item 2.02 Supply of 11 kV, Horizontal Cross Arm with clamps, HTST supports, bolts, nuts and washers for RCC Pole - 9 Mtr Long, 145 Kg WL ---- etc., complete with all lead Set 591.89 591.89 6.0 False None None False None False 3551.34 0 3037321 102497 None Item 2.02 Erection of 11 kV, Horizontal Cross Arm with clamps, HTST supports, bolts, nuts and washers for RCC Pole - 9 Mtr Long, 145 Kg WL ---- etc., complete with all lead Set 312.35 312.35 6.0 False None None False None False 1874.1 0 3037322 102497 None Item 6.06 Supply and fixing of 11 kV, 5 KN Polymeric Pin Insulator (24 mm Dia FRP Rod) ---- etc., complete with all lead Nos 249.15 249.15 18.0 False None None False None False 4484.7 0 3037323 102497 None Item 6.10 Supply and fixing of 11 kV, 45 KN Polymeric Insulator ---- etc., complete with all lead Nos 226.06 226.06 18.0 False None None False None False 4069.08 0 3037324 102497 None Item 13.12 Erection of 11 kV, 45 KN Polymeric Insulator ---- etc., complete with all lead Nos 58.33 58.33 18.0 False None None False None False 1049.94 0 3037325 102497 None Item 6.08 Supply and fixing of 15 Strain Insulator ---- etc., complete with all lead Set 71.7 71.7 4.0 False None None False None False 286.8 0 3037326 102497 None Item 7.02 Supply of Rabbit ACSR Conductor ---- etc., complete with all lead Km 56192.8 56192.8 1.0 False None None False None False 56192.8 0 3037327 102497 None Item 6.02 Erection of Rabbit ACSR Conductor ---- etc., complete with all lead Km 5300.35 5300.35 1.0 False None None False None False 5300.35 0 3037328 102497 None Item 10.01 Supply and fixing of PG Clamps for Rabbit Conductor ---- etc., complete with all lead No 170.15 170.15 15.0 False None None False None False 2552.25 0 3037329 102497 None Item 2.16 Supply of Spiral Earth Electrode ---- etc., complete with all lead No 290.48 290.48 9.0 False None None False None False 2614.32 0 3037330 102497 None Item 2.16 Erection of Spiral Earth Electrode ---- etc., complete with all lead No 113.03 113.03 9.0 False None None False None False 1017.27 0 3037331 102497 None Item 68.17 Supply and fixing of Caution/Danger Board ---- etc., complete with all lead No 182.31 182.31 5.0 False None None False None False 911.55 0 3037332 102497 None Item 4.02 Supply of Anti Climbing Device (12 Mtr GI Barbed Wire ---- etc., complete with all lead Each 108.17 108.17 6.0 False None None False None False 649.02 0 3037333 102497 None Item 5.09 Erection of Anti Climbing Device (12 Mtr GI Barbed Wire ---- etc., complete with all lead Each 51.04 51.04 6.0 False None None False None False 306.24 0 3037334 102497 None Item 41.01 Load Break Switch with Panel ---- etc., complete with all lead No 89014.68 89014.68 1.0 False None None False None False 89014.68 0 3037335 102497 None Item 58.01 11 kV HT Metering cubicle of different CT Ratio, Both side cable entry type with 3 CT & 3 PT, With Transparent Cover TTB, with 30x8 mm Copper Busbar, Modem & 2 No of Meters for 3 Phase 4 Wire Metering without Load Break Switch (HT Metering Box Fabricated out of 3 mm MS Sheet duly epoxy powder coated) as per revised Specification (Dwg No. BESCOM/GM/QS&S/-- Dtd 24.11.2018) ---- etc., complete with all lead No 295915.86 295915.86 1.0 False None None False None False 295915.86 0 3037336 102497 None Item 53.01 CT PT Operated ETV Meter 0.2s Accuracy Class with ABT feature and DLMS protocal with ToD with RS 232 PortUNIDIRACTIONAL (Used for HT Installation, LT Metering Cubicle 50-150 KW ---- etc., complete with all lead No 23840.07 23840.07 1.0 False None None False None False 23840.07 0 3037337 102497 None Item Least Quotation Rate Supply, installation, testing and commissioning of 500 kVA , 11kV/433V, 3 phase, 50 Hz, Delta star, DYn11 , outdoor, natually cooled, Oil Immersed copper double wound transformer Conforming to IS: 11801180 3 LEVEL Contained in mild steel radiator Cooled tank with first fill of oil as per IS: 335 with On load tap changer from 5 to 15 in steps of 1.25%, remote tap changes panel with AVR, class F insulation, Rating and Diagram Plate, Earthing Terminals - 2 Nos,Liffting Lugs,Air release hole with plug,Dehydrating Silica Gel Breather,Prismatic Oil level Guage,Oil Conservator with drain plug,Thermometer pocket,Jacking Lugs,Bottom drain cum filter valve,Top filter valve,4 Nos. Bi-Directional rollers,Pressure relief device,Marshalling Box [wherever applicable],100 mm OTI/ 150 mm OTI with alarm & trip,WTI with alarm and trip,Buchholz Relay with alarm and trip,Shut off valves for Buchholz Relay,Magnetic Oil Level guage,Radiators - Fixed / Detachable With HT & LT Cable end boxes / Provison for LV Bus Duct type, The transformer shall have suitable enclosure for providing neutral CT on earthed star point with connector for connection to REF relay provided in Main panel. All routing test as per IS shall be conducted on the transformer. The Transformer Enclosure shall have suitably designed Louvers for Air Circulation & efficient Cooling, required Danger boards, signages, lettering etc.. The enclosure shall be Epoxy Powder coated. The transformer shall be subjected to all routine tests as per IS/IEC standards. Type test certificate shall be submitted (As Per EC BC Norms) ---- etc., complete with all lead Each 433989.83 433989.83 1.0 False None None False None False 433989.83 0 3037338 102497 None Item 12.56 Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia ---- etc., complete with all lead No 4266.05 4266.05 10.0 False None None False None False 42660.5 0 3037339 102497 None Item 12.58.3 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x6mm GI strip ---- etc., complete with all lead m 155.57 155.57 80.0 False None None False None False 12445.6 0 3037340 102497 None Item 12.58.9 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 40x6mm Copper strip ---- etc., complete with all lead Mtr 1996.9 1996.9 80.0 False None None False None False 159752.0 0 3037341 102497 None Item 12.58.11 Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 600x600x3mm Copper plate ---- etc., complete with all lead Each 9019.48 9019.48 10.0 False None None False None False 90194.8 0 3037342 102497 None Item 45.07 Supply & Making of 11KV (E) Extruded "X" linked for tubing & moulded & cross-linked components using Heat Shrink Stress Control tube having High Permittivity XLPE Terminations - INDOOR & OUTDOOR JOINTING KIT & confirming to the GTP. 3x95Sqmm.Outdoor ---- etc., complete with all lead Set 4943.03 4943.03 4.0 False None None False None False 19772.12 0 3037343 102497 None Item 45.04 Supply & Making of 11KV (E) Extruded "X" linked for tubing & moulded & cross-linked components using Heat Shrink Stress Control tube having High Permittivity XLPE Terminations - INDOOR & OUTDOOR JOINTING KIT & confirming to the GTP. 3x95Sqmm.Indoor ---- etc., complete with all lead Set 3813.92 3813.92 2.0 False None None False None False 7627.84 0 3037344 102497 None Item 36.01 11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975. 95 Sqmm, (54 GI Wires - 2.5 mm Dia) ---- etc., complete with all lead Km 1081300.05 1081300.05 0.1 False None None False None False 108130.005 0 3037345 102497 None Item 38 Providing chain link fencing 50 mm size of 8 guage properly stretched between rectangular Poles and fixed with suitable bolts & nuts, the free ends shall be welded to the Pole and block pipe at top and bottom as required including cost of all materials, labour, lead and lifts, cutting, bending wherever necessary, wastage and lapping etc., complete as per the direction of the engineer incharge for work including two coats of approved quality paint over one coat of primer paint. ---- etc., complete with all lead Sqm 1199.59 1199.59 150.0 False None None False None False 179938.5 0 3037346 102497 None Item 5.42.1 Fabricating supplying and mounting MS box made out ...SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete 16SWG ---- etc., complete with all lead Sq CM 0.6 0.6 170000.0 False None None False None False 102000.0 0 3037347 102497 None Item 5.40.5 Supplying .........amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 1000Amps double run of 4x60x10mm Aluminum Strips ---- etc., complete with all lead m 12858.93 12858.93 8.0 False None None False None False 102871.44 0 3037348 102497 None Item 5.41.3 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 75x75x6mm ---- etc., complete with all lead m 674.54 674.54 12.0 False None None False None False 8094.48 0 3037349 102497 None Item 5.41.5 Supplying and fixing angle iron frame work iabricated out of M.S. angle iron.. and M.S. flat ... with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint 75x150x75x6mm C channel ---- etc., complete with all lead m 1125.46 1125.46 12.0 False None None False None False 13505.52 0 3037350 102497 None Item 5.15.20 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.FOUR POLE 800Amps 50kA ---- etc., complete with all lead Each 60648.46 60648.46 1.0 False None None False None False 60648.46 0 3037351 102497 None Item 5.38 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C ---- etc., complete with all lead Each 625.93 625.93 3.0 False None None False None False 1877.79 0 3037352 102497 None Item 10.1.13 Supplying, installing, testing and commissioning of 250KVA/200kw Diesel Generator set with following specifications. Power rating as per standard reference condition as per-BS 5514 / ISO 3046 / ISO 8528 & IS 1002 / ISO 3046 Generator set specificationsEngine: Diesel generating set are rated at 1500RPM and conform to ISO 8528 specifications. The engines are radiator cooled, four stroke and multi cylinder, conforming to ISO 3046. The scope of supply includes: Electrical starter motor 12V DC Battery charging alternator, Bosch fuel system with mechanical governor, A1 Class. Spin-on lube oil filter, Spin-on dual fuel filter with water separator, Turbocharger, Charge air cooler, Silencer (Hospital grade),Dry type air cleaner, Shutoff coil, Flywheel and flywheel housing, First fill of lube oil and coolant, Safety for low lube oil pressure, Safety for high water temperature, Permissible overload of 10% for one hour in 12 hours of operation Capacity of Fuel Tank: Fuel tank suitable for 8 hours of operation 415 Volts, 0.8 pf (lag) suitable for 50 Hz, 3 phase, 4 wire systems, conforming toIS/IEC 60034-1. The Alternator is brushless type, screen protected, revolving field, self excited, self regulated through an AVR. The alternator shall have battery voltage, Engine running hours, Engine Temp, Engine oil pressure, Control includes provision for Service adjustment and calibration of DG control functions, Voltage, frequency selection, Configurable input and output set up, Meter calibration, Engine controls, Power Start operates on 12 VDC batteries,- Auto start mode accepts a ground signal from remote devices to automatically start the DG set. The remote start will also wake up the control system from sleep mode. Acoustic enclosure: The acoustic enclosure shall be made of 1.6 mm thick CRCA sheets in suitable approved shade and a structural/ sheet metal base frame painted in black. The walls of the enclosure are insulated with fire retardant foam so as to comply with the 75dBA at 1 mtr sound levels specified by Ministry of Environment & Forest. The enclosure has the following features: Specially designed to meet stringent MOEF/ CPCB norms of 75dBA 1mtrat 75load under free field conditions, Two point lifting for easy handling at customer site, Designed to have optimum serviceability, Air inlet louvers specially designed to operate at rated load made on special purpose CNC machines for consistency in quality and workmanship, Insulation material meets exacting IS 8183 specifications for better sound attenuation, Flush styling - no projections, Fluid drains for lube oil and fuel, Fuel filling point inside the enclosure. ---- etc., complete with all lead Set 2314511.74 2314511.74 1.0 False None None False None False 2314511.74 0 3037353 102497 None Item 10.2.7 Supply, Erection, testing and commissioning of AMF panel suitable for .....KVA DG set. The panel is of cubical type base/floor mounting control panel with hinged doors, undrilled bottom gland plate, aluminium Bus Bar with the accommodation for .....amps 4 pole contactor for alternator with thermal O/L relay,..... Amps 4 pole contactor for mains, HRC fuse for short circuit protection, Microprocessor based AMF module with supply failure timer, Restoration timer, 3 impulse automatic engine start/stop logic, Mains/generator voltage, ....capacity bypass switch and frequency sensing, PCC 1301 controller with water temperature/Lube oil pressure/ engine speed, Voltage/ampere/Frequency/ KVA, Running-hour count, No of starts, Fault indication, over / under speed, Fails to start, Low oil pleasure, High engine temperature, Under/over voltage, over current, Earth fault relay, with indications for Mains on, Load on Mains, Battery charger on Push buttons AMf module by pass Mode, Battery charger unit with inbuilt Auto/Manual and flat/Boost facility. 250 KVA ---- etc., complete with all lead Each 341585.73 341585.73 1.0 False None None False None False 341585.73 0 3037354 102497 None Item Least Quotation Rate Supply & installation of exhaust gas piping of suitable diameter as per manufactures standard welded black MS, B class pipe confirming to IS:3589 cut to required lengths and installed with necessary bends, supports and clamps, anti- vibration mountings, insulation of exhaust system with mineral wool / Rockwool, 50mm thick wire mesh & aluminum cladding etc. ---- etc., complete with all lead m 9440.0 9440.0 10.0 False None None False None False 94400.0 0 3037355 102497 None Item Least Quotation Rate Supply and installing of DG set stack using angular structure, channel, necessary nut and bolt and all required accessories for erecting exhaust pipe from 2 nos DG set and space provision for provinding exhaust pipe for 2 more DG set in future. The design of the stack with foundation shall be got approved before fabrication. The foundation for the stack shall be measured separately. ---- etc., complete with all lead Kg 236.0 236.0 600.0 False None None False None False 141600.0 0 3037356 102497 None Item Least Quotation Rate Supply and laying of 2Cx2.5SQ MM and 6CX2.5 SQ MM Sheilded Sensor and control Cables ---- etc., complete with all lead m 236.0 236.0 80.0 False None None False None False 18880.0 0 1710321894000 0 None None Buildings CCU Gadag - External Water Supply and drainage Works 1894691.29 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3037357 102498 None Item 1.4 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & otherappurtenaces required to complete the work.In all kinds of soils Depth upto 1.5 m ---- etc., complete with all lead Cum 294.12 294.12 354.0 False None None False None False 104118.48 0 3037358 102498 None Item 1.11 Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering,lead up to 50 m and lift upto 1.5 m. ---- etc., complete with all lead Cum 526.26 526.26 354.0 False None None False None False 186296.04 0 3037359 102498 None Item 10.3.7 Providing UPVC FOAM CORE pipes conforming to IS 16098 P-1 2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing) etc.complete. for:Pipes of SN8 Self Fit - 160mm dia. ---- etc., complete with all lead m 749.9 749.9 145.0 False None None False None False 108735.5 0 3037360 102498 None Item 10.3.8 Providing UPVC FOAM CORE pipes conforming to IS 16098 P-1 2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS contractor will make his own arrangements for procuring water for testing) etc. complete. for: Pipes of SN8 Self Fit - 200mm dia. ---- etc., complete with all lead m 1081.7 1081.7 125.0 False None None False None False 135212.5 0 3037361 102498 None Item 10.2.4 Providing UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS contractor will make his own arrangements for procuring water for testing) etc. complete for:Pipes of SN4, 160mm dia. ---- etc., complete with all lead m 700.07 700.07 195.0 False None None False None False 136513.65 0 3037362 102498 None Item 16.9 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc.excluding the cost of CI frame and cover.. ---- etc., complete with all lead Each 6628.79 6628.79 28.0 False None None False None False 185606.12 0 3037363 102498 None Item 13.38 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber 100mm x 100mm size P type with Non Modular common burnt clay bricks of designation 3.5& water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: ---- etc., complete with all lead Nos 3077.39 3077.39 20.0 False None None False None False 61547.8 0 3037364 102498 None Item 16.18.6 Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, danger lighting and using of sight rails and boning rods wherever necessary, shoring and strutting wherever required using Ordinary Port Land Cement, using 1:1.5:3 proportion RCC with 20 mm and down graded jelly, well graded sand and steel of approved quality, 200 mm thick top concrete slab, having wall thickness and raft thickness as in approved drawings and with an offset in raft alround the chamber as in approved drawing, benching concrete with 1:6 slope towards the central drain finished smooth, including fixing and grouting of pipes, including conveying to work spot supply and fixing SFRC Machinehole cover and frame (Heavy duty) conforming to IS:12592 with latest amendments, on a bed of CC 1:2:4 Providing and fixing of minimum 3 mm thick encapsulated plastic footsteps (as per IS 10910) on 12 mm dia. Grade Fe-500 steel bar (as per IS 1786) staggered at 300 mm apart as detailed in Technical specifications, including stone grit beding wherever required, watering, curing, engraving Machinehole number with flow direction on the inner cylindrical surface etc., complete including cost of reinforcement steel and fabrication charges and also cost and conveyance of all materials, labour with all lead and lifts. The Pre-cast RCC Machinehole are for various diamters and depths as stated below and as per detailed drawings, specifications and direction of the Engineer. For 1.2m dia Machinehole: Constructing Pre-cast RCC Machinehole 1.2 m internal dia. ,3.0M depth & SFRC cover & frame ---- etc., complete with all lead Nos 95394.31 95394.31 3.0 False None None False None False 286182.93 0 3037365 102498 None Item 13.23.5 Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball 50 mm nominal bore, 242mm long, weighing not less than 1240 g ---- etc., complete with all lead Nos 1633.49 1633.49 3.0 False None None False None False 4900.47 0 3037366 102498 None Item 7.5.1 Providing and fixing DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc. complete. For DI/CI puddle flanges of 80mm dia. ---- etc., complete with all lead Each 1920.33 1920.33 8.0 False None None False None False 15362.64 0 3037367 102498 None Item 7.5.2 Providing and fixing DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc. complete . For DI/CI puddle flanges of 100mm dia. ---- etc., complete with all lead Each 2261.85 2261.85 6.0 False None None False None False 13571.1 0 3037368 102498 None Item 7.5.3 Providing and fixing DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc. complete. For DI/CI puddle flanges of 150mm dia. ---- etc., complete with all lead Each 2879.28 2879.28 4.0 False None None False None False 11517.12 0 3037369 102498 None Item 7.5.5 Providing and fixing DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc. complete . For DI/CI puddle flanges of 250mm dia. ---- etc., complete with all lead Each 5481.45 5481.45 3.0 False None None False None False 16444.35 0 3037370 102498 None Item 21.1.10 Water purification plants: Supplying, Installation and Commissioning of automatic Water purification plant (RO+UF) with all accessories piping, product water tank on single phase power supply as per the enclosed detailed Technical Specifications including cost of material, loading and unloading and as directed by the Engineer in charge. (Ref- detailed specification enclosed seperatly). Note:- 1.The above rates mentioned are only for the preparation of estimate purpose. 2. All items are to be of BSI /NFS standards,with BSI / NFS mark . 3. Tenders to be invited for procurement. 4. No direct payment should be made under any situation or condition or on any account. 5. After commissioning of plant necessary testing to be done for the satisfactory of Engineer Incharge. Note : Refer the ANNEXURE : F for Detailed Specification of Each componentsFor (For 1000 LPH FRP : Skid) Type (HOSPITAL ) ---- etc., complete with all lead Each 505606.39 505606.39 1.0 False None None False None False 505606.39 0 3037371 102498 None Item 13.40.5 Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments. Sump To OHT (DOMESTIC) (Hospital) ) (3 HP, size 50x40 Head 30M, Discharge 198 LPM) ---- etc., complete with all lead Each 22868.96 22868.96 2.0 False None None False None False 45737.92 0 3037372 102498 None Item 13.32 Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work. ---- etc., complete with all lead Job 7900.09 7900.09 2.0 False None None False None False 15800.18 0 3037373 102498 None Item 13.40.3 Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest mendments.Sump To OHT (FLUSHING) (Hospital) (3 HP, size 50x40 Head 30M, Discharge 198 LPM) ---- etc., complete with all lead Each 22868.96 22868.96 2.0 False None None False None False 45737.92 0 3037374 102498 None Item 13.32 Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work. ---- etc., complete with all lead Job 7900.09 7900.09 2.0 False None None False None False 15800.18 0 1710321894000 0 None None Buildings Sump tank and Bituminous Road 5913366.42 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3037375 102499 None Item 2.5A Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness.By Mechanical Means using Dozer In area of light jungle ---- etc., complete with all lead Sqm 477.65 477.65 19.7892 False None None False None False 9452.31138 0 3037376 102499 None Item 1.14.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work 1.14.1 In all kinds of soils Depth upto 3 m. ---- etc., complete with all lead Cum 123.97 123.97 536.75 False None None False None False 66540.8975 0 3037377 102499 None Item 1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- etc., complete with all lead Cum 323.29 323.29 108.02 False None None False None False 34921.7858 0 3037378 102499 None Item 2.1.3 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates. Including FormWork ---- etc., complete with all lead Cum 7279.03 7279.03 15.81 False None None False None False 115081.4643 0 3037379 102499 None Item 2.5.2 A. Raft Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 8566.49 8566.49 30.62 False None None False None False 262305.9238 0 3037380 102499 None Item 2.5.2 pump room and sump tank-walls Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 14138.86 14138.86 39.64 False None None False None False 560464.4104 0 3037381 102499 None Item 2.5.2 Cover slab Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 12475.47 12475.47 27.84 False None None False None False 347317.0848 0 3037382 102499 None Item 2.5.2 D. beams- pumproom E. lintel-beam Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 13307.17 13307.17 4.94 False None None False None False 65737.4198 0 3037383 102499 None Item 2.5.2 Staircase Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete with all lead Cum 12059.62 12059.62 1.83 False None None False None False 22069.1046 0 3037384 102499 None Item 2.11 h Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.All other type of structures ---- etc., complete with all lead t 96029.96 96029.96 10.2 False None None False None False 979505.592 0 3037385 102499 None Item 6.32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- etc., complete with all lead Sqm 1592.17 1592.17 36.12 False None None False None False 57509.1804 0 3037386 102499 None Item 11.5.1 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in- Charge. ---- etc., complete with all lead Sqm 5442.56 5442.56 4.2 False None None False None False 22858.752 0 3037387 102499 None Item 15.14 UGT/OHT (inside) waterproofing with Antimicrobial CoatingProviding and Applying two component, water-based food grade epoxy resin coating on inside surface of Potable water tank having antialgae, antifungal, Non-toxic, hygiene cum dampproof coating Certified by CFTRI as per 21 CFR 175 300 of US FDA, having mixing Ratio (Base: Hardener: Water) 1:1:1 to be applied @ 0.35 Kg/m2 in 2 coats. Ensure that this coating is applied over the protective plaster, and that Item No. 4 is completed across the entire surface prior to applying the protective plaster. The Waterproofing material shall have Specific Gravity: 1.2, Water vapor permeance: 244.48 g/m2/24 hrs, as per IS 7809/Pt 2/1977, Adhesion strength: 2 N/mm2 as per ASTM D 4541: 02. The finished cost to include surface preparation completely as per specification. ---- etc., complete with all lead Sqm 2033.36 2033.36 186.24 False None None False None False 378692.9664 0 3037388 102499 None Item 8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 450.91 450.91 582.23 False None None False None False 262533.3293 0 3037389 102499 None Item 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 139.77 139.77 7.08 False None None False None False 989.5716 0 3037390 102499 None Item 8.21 Providing White washing with lime to give an even shade :New work (three coats) with lime of approved quality, including cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 31.6 31.6 511.11 False None None False None False 16151.076 0 3037391 102499 None Item 8.28 Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- etc., complete with all lead Sqm 108.17 108.17 511.119 False None None False None False 55287.74223 0 3037392 102499 None Item 18.3 Providing & fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking arrangements with M.S flats 32x6 mm etc & painting with two or more coats with black Japan paint etc. complete as directed by the engineer-in-charge. ---- etc., complete with all lead Nos 2384.61 2384.61 4.0 False None None False None False 9538.44 0 3037393 102499 None Item 1.12 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. ---- etc., complete with all lead Cum 115.46 115.46 540.0 False None None False None False 62348.4 0 3037394 102499 None Item 1.4.1 Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m ---- etc., complete with all lead Cum 294.12 294.12 540.0 False None None False None False 158824.8 0 3037395 102499 None Item 3.1 Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work ---- etc., complete with all lead Cum 103.3 103.3 108.0 False None None False None False 11156.4 0 3037396 102499 None Item 4.11 A Making 50 mm x 50 mm furrows, 25mm/ 50mm deep, 45 degrees to the center line of the road and at one metre interval in the existing thin bituminous wearing coarse including sweeping and disposal of excavated material.25 mm deep furrow cutting ---- etc., complete with all lead Sqm 9.72 9.72 1080.0 False None None False None False 10497.6 0 3037397 102499 None Item 3.7 Compacting original ground supporting embankment-Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction. ---- etc., complete with all lead Cum 127.61 127.61 161.99 False None None False None False 20671.5439 0 3037398 102499 None Item 1.8 Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. ---- etc., complete with all lead Cum 576.0 576.0 540.0 False None None False None False 311040.0 0 3037399 102499 None Item 4.2 V Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front end loader at OMC and compacting with vibratory roller to achieve the desired density, complete as per clause 401 .For Grading -V Material ---- etc., complete with all lead Cum 3022.69 3022.69 108.0 False None None False None False 326450.52 0 3037400 102499 None Item 4.17 Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface andcompactingwithvibratoryrollertoachievethedesireddensity. ---- etc., complete with all lead Cum 3110.2 3110.2 108.0 False None None False None False 335901.6 0 3037401 102499 None Item 5.1 Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/m2 using mechanical means. ---- etc., complete with all lead Sqm 49.83 49.83 1080.0 False None None False None False 53816.4 0 3037402 102499 None Item 5.3 Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with mechanical broom ---- etc., complete with all lead Sqm 14.58 14.58 1080.0 False None None False None False 15746.4 0 3037403 102499 None Item 5.6 A Providing and laying Bituminous Macadam with 120 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG- 40 @ 3.3% by weight of mix, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction ---- etc., complete with all lead Cum 9429.07 9429.07 81.0 False None None False None False 763754.67 0 3037404 102499 None Item 5.31 Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 5% by weight of mix and filler, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per MoRTH V revision. ---- etc., complete with all lead Cum 12338.74 12338.74 27.0 False None None False None False 333145.98 0 3037405 102499 None Item 2.1.3 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates. Including FormWork ---- etc., complete with all lead Cum 7279.03 7279.03 10.8 False None None False None False 78613.524 0 3037406 102499 None Item 8.42.2 Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of PCC shall be paid extra)600 x 200 x 100 mm Kerb Stone ---- etc., complete with all lead m 303.84 303.84 360.0 False None None False None False 109382.4 0 3037407 102499 None Item 4.19 Construction of Median and Island above road level with approved material deposited at site from roadway cutting and excavation for drain and foundation of other structures, spread, graded and compacted as per clause 408 ---- etc., complete with all lead Cum 446.05 446.05 48.6 False None None False None False 21678.03 0 3037408 102499 None Item 8.10 Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces. ---- etc., complete with all lead Sqm 132.47 132.47 251.99 False None None False None False 33381.1153 0 1710321894000 0 None None Buildings Signages for CCU unit Gadag 3252901.0 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3037409 102500 None Item approved rate 3D Acrylic Channel letters 100mm thick internally lit with LEDs ---- etc., complete with all lead No 65372.0 65372.0 1.0 False None None False None False 65372.0 0 3037410 102500 None Item approved rate 3D Acrylic Channel letters100mm thick internally lit with LEDs ---- etc., complete with all lead No 147972.0 147972.0 1.0 False None None False None False 147972.0 0 3037411 102500 None Item approved rate 3D 40mm SS Mirror Finish channel letters Non Lit ---- etc., complete with all lead No 26550.0 26550.0 5.0 False None None False None False 132750.0 0 3037412 102500 None Item approved rate Acid Etching on SS fixed on Acrylic ---- etc., complete with all lead No 15104.0 15104.0 5.0 False None None False None False 75520.0 0 3037413 102500 None Item approved rate SS Acid etching ---- etc., complete with all lead No 1321.6 1321.6 20.0 False None None False None False 26432.0 0 3037414 102500 None Item approved rate SS Acid etching stuck on Acrylic ---- etc., complete with all lead No 2242.0 2242.0 15.0 False None None False None False 33630.0 0 3037415 102500 None Item approved rate 3D Aluminium Channel Letter ---- etc., complete with all lead No 9145.0 9145.0 2.0 False None None False None False 18290.0 0 3037416 102500 None Item approved rate Aluminum Modular Signage using Aluminum alloy 6063 extrusion with Anodizing (thickness typically to be 30 microns. The integrity to meet international specifications ISO 21431981) with life time warranty in normal working conditions. Clear Cover : Clear UV protected 1mm thick Poly carbonate sheet with non Glare or glossy finish. Size 210 X 700 ---- etc., complete with all lead No 4484.0 4484.0 8.0 False None None False None False 35872.0 0 3037417 102500 None Item approved rate Acrylic Signage ---- etc., complete with all lead No 2950.0 2950.0 2.0 False None None False None False 5900.0 0 3037418 102500 None Item approved rate SS Acid etching ---- etc., complete with all lead No 9145.0 9145.0 15.0 False None None False None False 137175.0 0 3037419 102500 None Item approved rate Acrylic Signage ---- etc., complete with all lead No 472.0 472.0 15.0 False None None False None False 7080.0 0 3037420 102500 None Item approved rate 5MM Sunboard with vinyl ---- etc., complete with all lead No 1770.0 1770.0 15.0 False None None False None False 26550.0 0 3037421 102500 None Item approved rate 5MM Sunboard with vinyl ---- etc., complete with all lead No 2950.0 2950.0 5.0 False None None False None False 14750.0 0 3037422 102500 None Item approved rate SS Acid etching ---- etc., complete with all lead No 1321.6 1321.6 10.0 False None None False None False 13216.0 0 3037423 102500 None Item approved rate 3D Aluminium Channel Letter ---- etc., complete with all lead No 9145.0 9145.0 2.0 False None None False None False 18290.0 0 3037424 102500 None Item approved rate Acrylic A4 size inserts ---- etc., complete with all lead No 2950.0 2950.0 2.0 False None None False None False 5900.0 0 3037425 102500 None Item approved rate Acid Etching on SS fixed on Acrylic ---- etc., complete with all lead No 10030.0 10030.0 2.0 False None None False None False 20060.0 0 3037426 102500 None Item approved rate Aluminum Modular Signage using Aluminum alloy 6063 extrusion with Anodizing (thickness typically to be 30 microns. The integrity to meet international specifications ISO 2143 1981) with life time warranty in normal working conditions. Clear Cover : Clear UV protected 1mm thick Poly carbonate sheet with non Glare or glossy finish. Size - 210 X 700 ---- etc., complete with all lead No 4484.0 4484.0 4.0 False None None False None False 17936.0 0 3037427 102500 None Item approved rate SS Acid etching stuck on Acrylic ---- etc., complete with all lead No 2242.0 2242.0 15.0 False None None False None False 33630.0 0 3037428 102500 None Item approved rate 3D 40mm SS Mirror Finish channel letters - Non Lit ---- etc., complete with all lead No 26550.0 26550.0 2.0 False None None False None False 53100.0 0 3037429 102500 None Item approved rate Acrylic Signage ---- etc., complete with all lead No 2950.0 2950.0 4.0 False None None False None False 11800.0 0 3037430 102500 None Item approved rate SS Acid etching ---- etc., complete with all lead No 8850.0 8850.0 3.0 False None None False None False 26550.0 0 3037431 102500 None Item approved rate Acrylic Signage ---- etc., complete with all lead No 472.0 472.0 20.0 False None None False None False 9440.0 0 3037432 102500 None Item approved rate 5MM Sunboard with vinyl ---- etc., complete with all lead No 1770.0 1770.0 8.0 False None None False None False 14160.0 0 3037433 102500 None Item approved rate 5MM Sunboard with vinyl ---- etc., complete with all lead No 2950.0 2950.0 4.0 False None None False None False 11800.0 0 3037434 102500 None Item approved rate Aluminum Modular Signage using Aluminum alloy 6063 extrusion with Anodizing (thickness typically to be 30 microns. The integrity to meet international specifications ISO 2143-1981) with life time warranty in normal working conditions. Clear Cover : Clear UV protected 1mm thick Poly carbonate sheet with non Glare or glossy finish. Size 210 X 700. ON THE BUILDING ---- etc., complete with all lead No 419726.0 419726.0 1.0 False None None False None False 419726.0 0 3037435 102500 None Item Least Quatation rate The Tendorer (Agency ) should arrange to obtain (Get) , detailed Architectural drawings and elevations, Structural designs and drawings including Soil exploration & proof checking by IISC IIT NIT or relevant only as decided by the Department and the same has to be furnished to the Department for approval and providing consultancy for Architectural designs & drawings, elevation, 3D view, MFP design and Drawings, Internal and External Electrical services including electrical infrastructure , interior layout and allied works etc., and any other drawings related to this project and 5 sets of as built drawings should be submitted to the employer.etc., complete as per the specification and Engineer in charge of work ---- etc., complete with all lead Job 1870000.0 1870000.0 1.0 False None None False None False 1870000.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1710321895000 1 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1710321895000 1 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1710321895000 1 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of Karnataka public Procurement on or before the last date and time of bid submission None 1710322680000 0 None None ELIGIBILITY The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of Karnataka public Procurement portal due to internet connectivity issues and technical glitches at bidders end. None 1710322685000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection None 1710322691000 0 None None ELIGIBILITY Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder None 1710322697000 0 None None ELIGIBILITY The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs None 1710322702000 0 None None ELIGIBILITY Conditional tenders will not be accepted None 1710322707000 0 None None ELIGIBILITY All the formats prescribed in the bid document shall be filled by the tenderer in complete manner None 1710322712000 0 None None ELIGIBILITY Royalty on construction materials and other taxes will be deducted as per prevailing Govt., orders as may be modified from time to time None 1710322716000 0 None None ELIGIBILITY Any discrepancies observed in the documents uploaded by the tenderer the tender shall liable to rejected None 1710322722000 0 None None ELIGIBILITY Earnest Money Deposit will have to be in any one of the forms as per the instructions in the financial bid document and shall have to be valid for 45 days beyond the validity of the tender None 1710322727000 0 None None ELIGIBILITY All formats prescribed in the bid documents shall be filled in complete manner (section 2 & of the bid document)and shall be uploaded properly, signed by tenderer. Necessary certificates shall be uploaded along with the formats wherever required. General documents section can be used for this purpose None 1710322732000 0 None None ELIGIBILITY Tenderers are required to read the Bid Documents carefully before submission of their bid None 1710322737000 0 None None ELIGIBILITY If the tenderer quotes bid price below the estimated contract value (Amount put to tender) then the tenderer has to submit the additional security deposit equal to the difference in cost and the additional security deposit should have a validity for the period of execution None 1710322741000 0 None None ELIGIBILITY If the numbers of page to be attached in one particular attachment is more, then all the pages can be put into one folder, zipped and then attached or else all the pages can be pasted in one word file and then this word file could be converted to PDF (portable documents format) format and then attached. (Please contract help desk from 9.00 AM to 9.00 PM ( Monday to Saturday) Ph No: 91-8046010000 and 91-8068948777 or send query through Karnataka public procurement portal through query option on or before specified time None 1710322746000 0 None None ELIGIBILITY The Contractor shall strictly take all reasonable steps to protect the environment on and off the site and to avoid damage or nuisance to persons or to property of the public or others resulting from pollution, noise or other causes arising as a consequence of his methods of operation None 1710322754000 0 None None ELIGIBILITY Materials like, steel (primary), cement, bitumen etc., required for the work shall be procured by the tenderer themselves and should be got tested positive by the quality control authority before use on the work None 1710322759000 0 None None ELIGIBILITY Tenderer should have latest GST Registration and latest clearance certificate in their name None 1710322764000 0 None None ELIGIBILITY The Rates quoted by the tenderer shall be inclusive of GST None 1710322769000 0 None None ELIGIBILITY Special Instructions to tenderers - as per bid document None 1710322777000 0 None None ELIGIBILITY The Defects Liability Period is 1 year from the date of completion of the work None 1710322783000 0 None None ELIGIBILITY Total value of Civil Engineering Construction works executed in the and payments received in the last five year i.e., 2018-19, 2019-20, 2020-21 2021-22 & 2022-23 None 1710322790000 0 None None ELIGIBILITY The Tenderers are bound to furnish the original certified documents to the employer within 3 days from the day of opening of technical bid for verification, failing which the bid of tenderer will be considered as technically non responsive None
preQualCriterionList	None
technicalCriterionList	createdTs version createdDate modifiedDate description criterionCategoryText criterionTypeOthersValue tenderTechnicalCriterionDocumentList None None None None Clause ITT 3.2(b)To qualify for award of this contract, each Tenderer in his/its name should have in the last five years i.e.(2018-19 to 2022-23) The tenderer should have been Satisfactorily completed at least one Satisfactorily completed at least one Similar work of value not less than Rs.941.50 Lakhs as prime contractor. Note : The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (b). Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Clause 3.2(c) To qualify for award of this contract, each Tenderer in his/its name should have in the last five years i.e.(2018-19 to 2022-23).Executed in any one year, the following minimum quantities of work Sl. No Description of key items of works Quantity Sl. No Description of key items of works Quantity 1)Earthwork Excavation 4100.00 Cum,2)RCC and PCC 1650.00 Cum,3)Steel Reinforcement for RCC work 1887.00 Tonne, 4)Cement Concrete Block Masonry/Solid Block Masonry /Load Bearing Wall/BBM 4300.00 Sqm, 5)Flooring/Dadooing(Vitrified/Granite/Ceramic/Cement concrete/cladding/dadooing) 4000.00 Sqm,6)Plastering 13600.00 Sqm,7)Painting 12680.00 Sqm, 8)M.S grill work 2760.00 kg 9)WPC 1200.00 Sqm 10)Lift 1 No Note-The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2(c) Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Clause 3.2(d) The tenderer or his identified sub contractor should possess required valid electrical license for executing building electrification works issued by KPWD/ Government electrical Inspectorate and should have executed similar Building electrical works totaling Rs.172.00 Lakhs in any one financial year.Note-The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (d).The letter of willingness of the sub contractor to be engaged for electrical works, should be obtained and uploaded in the KPP-portal. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Clause 3.2(e)The Tenderer or his identified sub-contractor should possess valid license for executing water supply/sanitary engineering works issued by BWSSB/ KUWS&DB and should have executed similar building water supply/sanitary engineering works totaling Rs.23.00 Lakhs in any one financial year. Note-The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (e).The letter of willingness of the sub contractor to be engaged for water supply & Sanitary works, should be obtained and uploaded in the KPP-portal. Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Clause 3.2(f) The Tenderer or his identified sub-contractor should have executed similar Fire Fighting works totaling to Rs.52.00 Lakhs in any one year. Note-The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (f). 3.2 (f).The letter of willingness of the sub contractor to be engaged for Fire Fighting works, should be obtained and uploaded in the KPP-portal Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Clause 3.2(g) The Tenderer or his identified sub-contractor should have executed similar MGPLS works works totaling to Rs.54.00 Lakhs in any one year. Note-The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (g). 3.2 (g).The letter of willingness of the sub contractor to be engaged for MGPLS works, should be obtained and uploaded in the KPP-portal Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Clause 3.2(h) The Tenderer or his identified sub-contractor should have executed similar MODULAR OT works works totaling to Rs.60.00 Lakhs in any one year. Note-The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (h). 3.2 (h).The letter of willingness of the sub contractor to be engaged for MODULAR OT works, should be obtained and uploaded in the KPP-portal Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None Clause 3.2(i) The Tenderer or his identified sub-contractor should have executed similar HVAC works works totaling to Rs.67.00Lakhs in any one year. Note-The Work done certificate should be issued by the Officer not less than the rank of Executive Engineer of State or Central Government/ Semi Government/Government undertaking/ autonomous bodies of Government will be considered for the clause 3.2 (i). 3.2 (i).The letter of willingness of the sub contractor to be engaged for HVAC works, should be obtained and uploaded in the KPP-portal Past Experience None createdTs version createdDate modifiedDate documentName None None None None Work Done Certificate None None None None List of Minimum Key Personnel to be deployed by the contractor at site for Contract work Sl No Position Qualification and Requirement No of Persons. 1)Project Manager B.E. Civil with minimum experience of 15 years in the Construction of buildings 1 (One), 2)Site Engineer BE Civil with minimum experience of 7 years in the Construction of buildings or Diploma in Civil Engineering with minimum experience of 10 years in the Construction of buildings and should have been working in permanent role of the organization for at least two years 2 (Two), 3)Electrical Engineer BE Electrical with minimum experience of 5 years in the Construction of buildings Or Diploma in Electrical Engineering with minimum experience of 10 years in the Construction of buildings and should have been working in permanent role of the organization for at least two years 1 (One). Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Educational and Experience certificates should be uploaded None None None None Clause 3.6 Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated for prime contractor are as under Assessed available tender capacity AxNx1.5- B Where A maximum value of civil engineering works executed in any one year during the last five years 2018-19 to 2022-23 updated to 2023-24 price level taking into account the completed as well as works in progress. N Number of years prescribed for completion of the works for which tenders are invited. B Value, at 2023 24 price level of existing commitments and ongoing works to be completed during the next 15 months. Note The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent. Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Ongoing and Existing comittement None None None None KPWD Class-I Registration Certificate Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Registration certificate issued by competent authority None None None None Clause ITT 3.3 (a)Equipment capacity Each tenderer should further demonstrate(a) available by owning at least 50% of the required/specified key and critical equipment for this work and (b) the remaining 50% can be deployed on ease/hire basis for all works provided, the relevant documents (commitment agreements etc.,) for availability for this work are furnished. Sl.No. Description of Equipment Quantity 1) Min 10 cft capacity Concrete Mixer-2 Nos. 2)Steel Centering sheets 1000 sqmtr 3).Tipper-02No 4).Excavator-2 No.5). Water tanker -2No 6). Bar Bending and cutting machine -1 No 7).Generator 500 KVA-1No Capabilities of Vendor None createdTs version createdDate modifiedDate documentName None None None None Others -- Invoices and receipt to be uploaded None None None None Clause ITT 3.2(a):To qualify for award of this contract, each Tenderer in his / its name should have in the last five years i.e.(2018-19 to 2022-23).The tenderer should have been achieved in at least two financial years a minimum annual financial turnover (in all classes of civil Engineering construction works only) of Rs.3013.00 Lakhs. Note: For Clause 3.2 (a) the Turn over certificate and balance sheet duly certified by the charted accountant is to be submitted. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Audited CA Certificate of Annual Turnover None None None None Clause 3.3(b)Liquid assets and /or availability of credit facilities of not less than Rs.565.00 Lakhs (Credit lines / letter of credit/ certificates from banks for meeting the fund requirement etc.(As per the prescribed format in clause 1.10 of SECTION 3, QUALIFICATION INFORMATION of this document.) as prime Contractor. Financial Status None createdTs version createdDate modifiedDate documentName None None None None Line of Credit
tenderCriterionDocumentList	documentName optional documentTypeText Annual Turnover Certificate True Technical Bid KPWD Registration Certificate True Technical Bid Work done certificate True Technical Bid GST certificate & latest paid receipt True Technical Bid ESI and EPF Certificate and paid receipt True Technical Bid
tenderWorkLocationList
tenderAddress	createdTs 1710326808000 version 0 createdDate None modifiedDate None blockNumber Office of the Chief Engineer, Engineering Wing, HFWD, Arogya Soudha, 3rd Floor, 1st Cross Magadi Road. street None city Bengalruu state Karnataka pin 560023
tenderRecallDTO	None