1709642312000 | 1 | None | None | Other Works | Construction of Drain at ward no.26 and 27th from Doddagaradikeri OHT Tank via Durgamma Temple to Railway Bridge in Harapanhalli town limits | 2399238.18 | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
---|
2926577 | 96453 | None | HPHD001 | Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead. By Mechanical Means. Prestressed / RCC grade M-20 & above Volume-3, Item No.- 2.8 (ii) B, Page No.- 10 | Cum | 1163.4 | 1163.4 | 35.16 | False | None | None | False | None | False | 40905.144 | 0 | 2926578 | 96453 | None | HPHD002 | Removing all type of Hume Pipes and Stacking including Earthwork and Dismantling of Masonry Works. Up to 600mm Dia Volume-3, Item No.- 2.17 (ix) A, Page No.- 11 | m | 1004.85 | 1004.85 | 6.0 | False | None | None | False | None | False | 6029.1 | 0 | 2926579 | 96453 | None | HPHD003 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work.
In all kinds of soils Depth upto 3 m Volume-1, Item No.- 1.14.1, Page No.- 8 | Cum | 107.1 | 107.1 | 152.45 | False | None | None | False | None | False | 16327.395 | 0 | 2926580 | 96453 | None | HPHD004 | Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. Volume-1, Item No.- 1.14.1, Page No.- 8 | Cum | 474.0 | 474.0 | 35.55 | False | None | None | False | None | False | 16850.7 | 0 | 2926581 | 96453 | None | HPHD005 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates Volume-1, Item No.- 2.1.3, Page No.- 15 | Cum | 6288.45 | 6288.45 | 56.205 | False | None | None | False | None | False | 353442.33225 | 0 | 2926582 | 96453 | None | HPHD006 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. All other type of structures Volume-1, Item No.- 2.11h, Page No.- 18 | t | 82961.55 | 82961.55 | 6.402 | False | None | None | False | None | False | 531119.8431 | 0 | 2926583 | 96453 | None | HPHD007 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Volume-1, Item No.- 2.4.2, Page No.- 16 | Cum | 8962.85 | 8962.85 | 77.31 | False | None | None | False | None | False | 692917.9335 | 0 | 2926584 | 96453 | None | HPHD008 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Volume-1, Item No.- 1.9, Page No.- 7 | Cum | 279.3 | 279.3 | 77.58 | False | None | None | False | None | False | 21668.094 | 0 | 2926585 | 96453 | None | HPHD009 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Volume-1, Item No.- 2.4.2, Page No.- 16 | Cum | 7966.98 | 7966.98 | 30.45 | False | None | None | False | None | False | 242594.541 | 0 | 2926586 | 96453 | None | HPHD010 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work | m | 2650.2 | 2650.2 | 167.0 | False | None | None | False | None | False | 442583.4 | 0 | 2926587 | 96453 | None | HPHD011 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work Volume-2, Item No.- 13.33.3, Page No.- 122 | Mtr | 310.8 | 310.8 | 18.7 | False | None | None | False | None | False | 5811.96 | 0 | 2926588 | 96453 | None | HPHD012 | Consolidated Labour charges for shifting of the conductor terminations(existing cut points) in deteriorated exisitng Poles to new Poles erected. Work includes all works associated with shifting of the terminations, like shifting of aerial fuse boards, cut outs, service main (UG cable and over head) and any other existing fitting. (CDS - 43) Volume-6, Item No.- 34, Page No.- 57 | Each | 6512.58 | 6512.58 | 3.0 | False | None | None | False | None | False | 19537.74 | 0 | 2926589 | 96453 | None | HPHD013 | Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge & MoRTH specification 804 Volume-3, Item No.- 8.54, Page No.- 78 | No | 9450.0 | 9450.0 | 1.0 | False | None | None | False | None | False | 9450.0 | 0 |
|