| 1710139293000 | 0 | None | None | Buildings | Construction of Toilet and Bathroom Building fot Gents and Ladies Fisherman at Belekeri fishery harbour in Ankola Talika of Uttar Kannada district | 3231241.88 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2984125 | 98977 | None | 1.4.1 | Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m (UNI SOR 2023-24 Vol-1, page. no. 5, Item no. 1.4.1) | Cum | 271.04 | 271.04 | 53.97 | False | None | None | False | None | False | 14628.0288 | 0 | | 2984126 | 98977 | None | 1.9 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. (UNI SOR 2023-24 Vol-1, page no. 7, Item no. 1.9) | Cum | 297.92 | 297.92 | 78.06 | False | None | None | False | None | False | 23255.6352 | 0 | | 2984127 | 98977 | None | 2.1.4 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M 10) Using 40 mm nominal size graded crushed coarse aggregates (UNI SOR 2023-24 Vol-1 page 15, sl. no. 2.1.4) | Cum | 6963.04 | 6963.04 | 19.52 | False | None | None | False | None | False | 135918.5408 | 0 | | 2984128 | 98977 | None | 2.2.5 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M30 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (UNI SOR 2023-24 Vol-1, page. no. 15, Item no. 2.2.5) | Cum | 7497.25 | 7497.25 | 6.9 | False | None | None | False | None | False | 51731.025 | 0 | | 2984129 | 98977 | None | 2.2.5 | Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M30 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (UNI SOR 2023-24 Vol-1, page. no. 15, Item no. 2.2.5)
| Cum | 12374.1 | 12374.1 | 0.94 | False | None | None | False | None | False | 11631.654 | 0 | | 2984130 | 98977 | None | 2.3.3 | Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M30 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (UNI SOR 2023-24 Vol-1, page. no. 16, Item no. 2.3.3)
| Cum | 11096.4 | 11096.4 | 4.93 | False | None | None | False | None | False | 54705.252 | 0 | | 2984131 | 98977 | None | 2.5.3 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M30 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (UNI SOR 2023-24 Vol-1, page. no. 16, Item no. 2.5.3) | Cum | 12556.54 | 12556.54 | 19.99 | False | None | None | False | None | False | 251005.2346 | 0 | | 2984132 | 98977 | None | 2.52 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (UNI SOR 2023-24 volume-1, page no. 17, Item no.2.5.2) | Cum | 11113.03 | 11113.03 | 1.74 | False | None | None | False | None | False | 19336.6722 | 0 | | 2984133 | 98977 | None | 2.11a | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. (The laps and wastages shall not be measured separately) (UNI SOR 2023-24 Vol-1 page.no.84, sl. no.2.11 a ) | t | 100191.84 | 100191.84 | 2.75 | False | None | None | False | None | False | 275527.56 | 0 | | 2984134 | 98977 | None | 5.4 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) (UNI SOR 2023-24 Vol-2, page. No.9, sl. No. 5.4) | Cum | 7155.68 | 7155.68 | 14.25 | False | None | None | False | None | False | 101968.44 | 0 | | 2984135 | 98977 | None | 5.7 | Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification I.S. 3620/1979 having compressive strength not less than 3.5 N/mm2 for saturated dry samples - For Super structure in CM 1:6. (UNI SOR 2023-24 Vol-2, page no 9 sl. No. 5.7) | Cum | 7565.6 | 7565.6 | 27.99 | False | None | None | False | None | False | 211761.144 | 0 | | 2984136 | 98977 | None | 6.13 | Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. (UNI SOR 2023-24 Vol-2, page. No.14, sl. No. 6.13) | Sqm | 1093.12 | 1093.12 | 104.94 | False | None | None | False | None | False | 114712.0128 | 0 | | 2984137 | 98977 | None | 12.12 | Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications (UNI SOR 2023-24 Vol-2, page. No.99, sl. No. 12.12)
| Cum | 139106.24 | 139106.24 | 0.76 | False | None | None | False | None | False | 105720.7424 | 0 | | 2984138 | 98977 | None | 12.15 | Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. ( excluding cost of fixtures ) (UNI SOR 2023-24 Vol-2, page. No.100, sl. No.12.15) | Sqm | 8337.28 | 8337.28 | 3.78 | False | None | None | False | None | False | 31514.9184 | 0 | | 2984139 | 98977 | None | 12.55.1 | Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges. (UNI SOR 2023-24 Vol-2, page No.104, sl. No.12.55.1).
| Sqm | 2649.92 | 2649.92 | 31.5 | False | None | None | False | None | False | 83472.48 | 0 | | 2984140 | 98977 | None | 11.34A | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding (UNI SOR 2023-24 Vol-2, page No.86, sl. No.11.34A) | Kgs | 188.16 | 188.16 | 124.74 | False | None | None | False | None | False | 23471.0784 | 0 | | 2984141 | 98977 | None | 8.4.1 | Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (UNI SOR 2023-24 Vol-2, page No.41, sl.No.8.4.1) | Sqm | 361.76 | 361.76 | 83.18 | False | None | None | False | None | False | 30091.1968 | 0 | | 2984142 | 98977 | None | 8.3.1 | Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (UNI SOR 2023-24 Vol-2, page No.41, sl.No.8.3.1).
| Sqm | 396.48 | 396.48 | 209.54 | False | None | None | False | None | False | 83078.4192 | 0 | | 2984143 | 98977 | None | 9.11 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. (UNI SOR 2023-24 Vol-2, page No.60 sl.No.9.11). | Sqm | 995.68 | 995.68 | 55.17 | False | None | None | False | None | False | 54931.6656 | 0 | | 2984144 | 98977 | None | 9.17 | Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.(UNI SOR 2023-24 Vol-2, page No.61 sl.No.9.17). | Sqm | 1245.44 | 1245.44 | 306.45 | False | None | None | False | None | False | 381665.088 | 0 | | 2984145 | 98977 | None | 15.1 | Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU wa terproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the wa terproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. (UNI SOR 2023-24 Vol-2, page No.149 sl.No.15.1) | Sqm | 915.04 | 915.04 | 84.64 | False | None | None | False | None | False | 77448.9856 | 0 | | 2984146 | 98977 | None | 8.51 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. (UNI SOR 2023-24 Vol-2, page No.50 sl.No.8.51) | Sqm | 112.0 | 112.0 | 393.06 | False | None | None | False | None | False | 44022.72 | 0 | | 2984147 | 98977 | None | 8.25 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(UNI SOR 2023-24 Vol-2, page No.45 sl.No.8.25) | Sqm | 153.44 | 153.44 | 83.18 | False | None | None | False | None | False | 12763.1392 | 0 | | 2984148 | 98977 | None | 8.29 | Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.s (UNI SOR 2023-24 Vol-2, page No.45 sl.No.8.29) | Sqm | 316.96 | 316.96 | 209.54 | False | None | None | False | None | False | 66415.7984 | 0 | | 2984149 | 98977 | None | 8.34.1 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (UNI SOR 2023-24 Vol-2, page No.47 sl.No.8.34.1) | Sqm | 59.36 | 59.36 | 10.0 | False | None | None | False | None | False | 593.6 | 0 | | 2984150 | 98977 | None | 8.41 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(UNI SOR 2023-24 Vol-2, page No.48 sl.No.8.41) | Sqm | 187.04 | 187.04 | 21.0 | False | None | None | False | None | False | 3927.84 | 0 | | 2984151 | 98977 | None | 001 | Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete. (internal work exposed on wall) - 20mm nominal OD pipes.(UNI SOR 2023-24 Vol-2, page No.122 sl.No.13.31.2)
| m | 271.04 | 271.04 | 26.6 | False | None | None | False | None | False | 7209.664 | 0 | | 2984152 | 98977 | None | 002 | Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete. (internal work exposed on wall) - 25mm nominal OD pipes.(UNI SOR 2023-24 Vol-2, page No.122 sl.No.13.31.3)
| m | 356.16 | 356.16 | 13.7 | False | None | None | False | None | False | 4879.392 | 0 | | 2984153 | 98977 | None | 003 | Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete. (internal work exposed on wall) - 32mm nominal OD pipes.(UNI SOR 2023-24 Vol-2, page No.122 sl.No.13.31.4)
| m | 448.0 | 448.0 | 41.46 | False | None | None | False | None | False | 18574.08 | 0 | | 2984154 | 98977 | None | 004 | Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) (UNI SOR 2023-24 Volume-2, page No.117 sl.No.13.3.2)
| Nos | 669.76 | 669.76 | 20.0 | False | None | None | False | None | False | 13395.2 | 0 | | 2984155 | 98977 | None | 005 | Providing and fixing brass stop cock of approved quality : (UNI SOR 2023-24 Vol-2, page No.117 sl.No.13.3.2)
| Nos | 341.6 | 341.6 | 14.0 | False | None | None | False | None | False | 4782.4 | 0 | | 2984156 | 98977 | None | 14.40 | 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. each 380.0 (UNI SOR Vol-2, page No.137 sl.No.14.40.2)
| Each | 555.52 | 555.52 | 8.0 | False | None | None | False | None | False | 4444.16 | 0 | | 2984157 | 98977 | None | 14.32.4 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing (UNI SOR 2023-24 Vol-2, page No.136 sl.No.14.32.4)
| Each | 1933.12 | 1933.12 | 4.0 | False | None | None | False | None | False | 7732.48 | 0 | | 2984158 | 98977 | None | 13.2 | Providing and fixing brass bib cock of approved quality 15mm (UNI SOR 2023-24 Vol-2, page No.117 sl.No.13.2)
| No | 320.32 | 320.32 | 16.0 | False | None | None | False | None | False | 5125.12 | 0 | | 2984159 | 98977 | None | 14.25 | Providing and fixing white vitreous china wash basin including making all connections but including the cost of fittings :(UNI SOR 2023-24 Vol-2, page No.129 sl.No.14.25.1)
| Each | 1104.32 | 1104.32 | 4.0 | False | None | None | False | None | False | 4417.28 | 0 | | 2984160 | 98977 | None | 13.87 | Providing and fixing Chlorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings this includes jointing of pipes and fittings with one steps solvent cement, trenching, refilling & testing of joints complete (external work) 100mm nominal OD Pipe (UNI SOR 2023-24 Vol-2, page No.123 sl.No.13.33.9)
| m | 2826.88 | 2826.88 | 35.0 | False | None | None | False | None | False | 98940.8 | 0 | | 2984161 | 98977 | None | 007 | Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (external work). - 150mm nominal OD pipes (UNI SOR 2023-24 Vol-2, page No.123 sl.No.13.33.10)
| m | 5942.72 | 5942.72 | 21.0 | False | None | None | False | None | False | 124797.12 | 0 | | 2984162 | 98977 | None | 13.22.2 | Providing and fixing PTMT grating of approved quality and colour Rectangular type with openable circular lid.(UNI SOR 2023-24 Vol-2, page No.120 sl.No.13.22.2) | Nos | 226.24 | 226.24 | 17.0 | False | None | None | False | None | False | 3846.08 | 0 | | 2984163 | 98977 | None | 14.5.1 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required Single half stall urinal with 5 litre P.V.C. automatic flushing cistern :(UNI SOR 2023-24 Vol-2, page No.123 sl.No.14.5.1)
| Each | 9679.04 | 9679.04 | 3.0 | False | None | None | False | None | False | 29037.12 | 0 | | 2984164 | 98977 | None | 14.29 | Providing and fixing 100 mm sand cast Iron grating for gully trap (UNI SOR 2023-24 Vol-2, page No.136 sl.No.14.29)
| Each | 52.64 | 52.64 | 2.0 | False | None | None | False | None | False | 105.28 | 0 | | 2984165 | 98977 | None | 13.53 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay (non modular) bricks of class designation 3.5 (UNI SOR 2023-24 Vol-2, page No.126 sl.No.13.53)
| Each Set | 6319.04 | 6319.04 | 3.0 | False | None | None | False | None | False | 18957.12 | 0 | | 2984166 | 98977 | None | 12.51 | Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. (UNI SOR 2023-24 Volume-2, page No.104, sl.No.12.51) | Each | 1137.92 | 1137.92 | 17.0 | False | None | None | False | None | False | 19344.64 | 0 | | 2984167 | 98977 | None | 13.34 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.:(UNI SOR 2023-24 Vol-2, page No.123 sl.No.13.34)
| l | 10.08 | 10.08 | 4000.0 | False | None | None | False | None | False | 40320.0 | 0 | | 2984168 | 98977 | None | 13.48 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 100 mm diameter (UNI SOR 2023-24 Vol-2, page No.125 sl.No.13.48)
| m | 325.92 | 325.92 | 22.8 | False | None | None | False | None | False | 7430.976 | 0 | | 2984169 | 98977 | None | 2.5.3 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M30 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (UNI SOR 2023-24 Vol-1, page. no. 16, Item no. 2.5.3)
| Cum | 13341.33 | 13341.33 | 2.15 | False | None | None | False | None | False | 28683.8595 | 0 | | 2984170 | 98977 | None | 8.5.2 | Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(UNI SOR 2023-24 Vol-2, page No.42, sl.No.8.5.2).
| Sqm | 390.88 | 390.88 | 306.45 | False | None | None | False | None | False | 119785.176 | 0 | | 2984171 | 98977 | None | 8.27 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(UNI SOR 2023-24 Vol-2, page No.45 sl.No.8.27)
| Sqm | 59.36 | 59.36 | 393.06 | False | None | None | False | None | False | 23332.0416 | 0 | | 2984172 | 98977 | None | 8.28 | Finishing inner walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(UNI SOR 2023-24 Vol-2, page No.45 sl.No.8.28)
| Sqm | 99.68 | 99.68 | 308.42 | False | None | None | False | None | False | 30743.3056 | 0 | | 2984173 | 98977 | None | 12.1 | Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) (Above 450m of drilling add 10% for every 50m depth)(UNI SOR 2023-24 Vol-5, page No.139 sl.No.12.1)Borewell depth of 50 to 100 Mtrs
| m | 519.68 | 519.68 | 20.0 | False | None | None | False | None | False | 10393.6 | 0 | | 2984174 | 98977 | None | 13.8.5 | Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incharge of work and latest amendments)(UNI SOR 2023-24 Vol-5, page No.150 sl.No.13.8.5)2.00 HP/1.5KW 15 STG
| Each | 20404.16 | 20404.16 | 1.0 | False | None | None | False | None | False | 20404.16 | 0 | | 2984175 | 98977 | None | 13.23.1 | Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor type NOTE: 1) DOL- Direct Online Starter 2) S-D- Star Delta Starter etc. complete.(UNI SOR 2023-24 Vol-5, page No.155 sl.No.13.23.1)Upto 3 HP pumps
| Each | 7280.0 | 7280.0 | 1.0 | False | None | None | False | None | False | 7280.0 | 0 | | 2984176 | 98977 | None | 14.7 | Supply and laying of LG UT cable having aluminium conductor PVC insulated, sheathed, galvanized steel wire / steel tap armored cable with PVC over sheathing.(UNI SOR 2023-24 Vol-5, page No.176 sl.No.14.7)
| m | 89.6 | 89.6 | 30.0 | False | None | None | False | None | False | 2688.0 | 0 | | 2984177 | 98977 | None | 990 | Unplasticised P.V.C.connection pipe with brass union 45 cm long20 mm bore uPVC Pipes 100 mm nominal dia.(UNI SOR 2023-24 Vol-2, page No.A42 sl.No.990)
| m | 530.88 | 530.88 | 30.0 | False | None | None | False | None | False | 15926.4 | 0 | | 2984178 | 98977 | None | 13.31.6 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 50 mm nominal dia Pipes .(UNI SOR 2023-24 Vol-2, page No.122 sl.No.13.31.6)
| m | 874.72 | 874.72 | 30.0 | False | None | None | False | None | False | 26241.6 | 0 | | 2984179 | 98977 | None | 1.1.2 | Open Conduit System Supplying heavy gauge PVC conduit pipe . dia . mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws.25 mm dia 2 mm thick (UNI SR Vol-6, PWD Elec, 2023-24, Pg No. 2, Item No. 1.1.2)
| m | 90.72 | 90.72 | 180.0 | False | None | None | False | None | False | 16329.6 | 0 | | 2984180 | 98977 | None | 2.1.1 | Point wiring using Copper wire with switch.: Supplying and wiring adopting loop system in existing PVC Conduit / casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. (a) Short point upto 3m from tapping point to out let via switch (UNI SR Vol-6, PWD Elec, 2023-24, Pg No. 5, Item No. 2.1.1)
| Point | 319.2 | 319.2 | 8.0 | False | None | None | False | None | False | 2553.6 | 0 | | 2984181 | 98977 | None | 2.1.2 | Point wiring using Copper wire with switch.: Supplying and wiring adopting loop system in existing PVC Conduit / casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. (b) Medium point above 3m upto 6m from tapping point to out let via switch (UNI SR Vol-6, PWD Elec, 2023-24, Pg No. 5, Item No. 2.1.2)
| Point | 441.28 | 441.28 | 15.0 | False | None | None | False | None | False | 6619.2 | 0 | | 2984182 | 98977 | None | 2.1.3 | Point wiring using Copper wire with switch.: Supplying and wiring adopting loop system in existing PVC Conduit / casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. (c)Long point above 6m upto 10m from tapping point to out let via switch (UNI SR Vol-6, PWD Elec, 2023-24, Pg No. 5, Item No. 2.1.3)
| Point | 638.4 | 638.4 | 18.0 | False | None | None | False | None | False | 11491.2 | 0 | | 2984183 | 98977 | None | 2.1.4 | Point wiring using Copper wire with switch.: Supplying and wiring adopting loop system in existing PVC Conduit / casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. (d)Two outlet in a row, above 3m upto 6m from tapping point to
out let via switches. (UNI SR Vol-6, PWD Elec, 2023-24, Pg No. 5, Item No. 2.1.4)
| Point | 792.96 | 792.96 | 1.0 | False | None | None | False | None | False | 792.96 | 0 | | 2984184 | 98977 | None | 2.3.2 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.The following additional tests are compulsory either to be conducted at works or independent lab with witness by inspecting authority.Additional Tests for FRLS-Applicable Standard Oxygen Index -IS 694-2010, Clause 16.8 Temperature Index -IS 694-2010, Clause 16.13 Smoke Density -IS 694-2010, Clause 16.14Test for Halogen Acid Gas evaluation -IS 694-2010, Clause16.12 (a)1.5 mm2 (UNI SR Vol-6, PWD Elec, 2023-24, Pg No. 5, Item No. 2.3.2)
| m | 29.12 | 29.12 | 120.0 | False | None | None | False | None | False | 3494.4 | 0 | | 2984185 | 98977 | None | 2.3.3 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.The following additional tests are compulsory either to be conducted at works or independent lab with witness by inspecting authority.Additional Tests for FRLS-Applicable Standard Oxygen Index -IS 694-2010, Clause 16.8 Temperature Index -IS 694-2010, Clause 16.13 Smoke Density -IS 694-2010, Clause 16.14Test for Halogen Acid Gas evaluation -IS 694-2010, Clause16.12 (b) 2.5 mm2 (UNI SR Vol-6, PWD Elec, 2023-24, Pg No. 5, Item No. 2.3.3)
| m | 47.04 | 47.04 | 240.0 | False | None | None | False | None | False | 11289.6 | 0 | | 2984186 | 98977 | None | 2.3.4 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694: confirming to latest amendments.The following additional tests are compulsory either to be conducted at works or independent lab with witness by inspecting authority.Additional Tests for FRLS-Applicable Standard Oxygen Index -IS 694-2010, Clause 16.8 Temperature Index -IS 694-2010, Clause 16.13 Smoke Density -IS 694-2010, Clause 16.14Test for Halogen Acid Gas evaluation -IS 694-2010, Clause16.12 (b) 4 mm2 (UNI SR Vol-6, PWD Elec, 2023-24, Pg No. 5, Item No. 2.3.4)
| m | 70.56 | 70.56 | 280.0 | False | None | None | False | None | False | 19756.8 | 0 | | 2984187 | 98977 | None | 3.4.3 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall : 4-5Way (UNI SR Vol-6, PWD Elec SR 2 - 2023-24, Pg No. 8, Item No. 3.4.3)
| Each | 198.24 | 198.24 | 2.0 | False | None | None | False | None | False | 396.48 | 0 | | 2984188 | 98977 | None | 3.4.5 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall : 8 Way (UNI SR Vol-6, PWD Elec SR 2 - 2023-24, Pg No. 8, Item No. 3.4.5)
| Each | 292.32 | 292.32 | 2.0 | False | None | None | False | None | False | 584.64 | 0 | | 2984189 | 98977 | None | 3.4.6 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall : 10-12 Way (UNI SR Vol-6, PWD Elec SR 2 - 2023-24, Pg No. 8, Item No. 3.4.6)
| Each | 357.28 | 357.28 | 1.0 | False | None | None | False | None | False | 357.28 | 0 | | 2984190 | 98977 | None | 3.5.3 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box : 4 Module (UNI SR Vol-6, PWD Elec SR 2 - 2023-24, Pg No. 8, Item No. 3.5.3)
| Each | 196.0 | 196.0 | 2.0 | False | None | None | False | None | False | 392.0 | 0 | | 2984191 | 98977 | None | 3.5.5 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box : 8 Module (UNI SR Vol-6, PWD Elec SR 2 - 2023-24, Pg No. 8, Item No. 3.5.5)
| Each | 318.0 | 318.0 | 2.0 | False | None | None | False | None | False | 636.0 | 0 | | 2984192 | 98977 | None | 3.5.6 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box : 10-12 Module (UNI SR Vol-6, PWD Elec SR 2 - 2023-24, Pg No. 8, Item No. 3.5.6)
| Each | 385.28 | 385.28 | 1.0 | False | None | None | False | None | False | 385.28 | 0 | | 2984193 | 98977 | None | 3.6.1 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (a) 6A One Way Switch (UNI SR Vol-6, PWD Elec SR 2 - 2023-24, Page No. 9,Item No.3.6.1)
| Each | 114.42 | 114.42 | 42.0 | False | None | None | False | None | False | 4805.64 | 0 | | 2984194 | 98977 | None | 3.6.3 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (b) 6A Three Way socket (UNI SR Vol-6, PWD Elec SR 2 - 2023-24, Page No.9, Item No.3.6.3)
| Each | 191.52 | 191.52 | 8.0 | False | None | None | False | None | False | 1532.16 | 0 | | 2984195 | 98977 | None | 3.6.6 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (c) 600W Dimmer (UNI SR Vol-6, PWD Elec SR 2 - 2023-24, Page No.5/ Item No.3.6.6)
| Each | 368.48 | 368.48 | 5.0 | False | None | None | False | None | False | 1842.4 | 0 | | 2984196 | 98977 | None | 3.6.8 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (d) 6A Bell Push ( (UNI SR Vol-6, PWD Elec SR 2 - 2023-24, Page No.5/ Item No.3.6.8 /2022-23 SR)
| Each | 198.24 | 198.24 | 2.0 | False | None | None | False | None | False | 396.48 | 0 | | 2984197 | 98977 | None | 3.6.9 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (e) 32A DP Switch (UNI SR Vol-6, PWD Elec SR 2 - 2023-24, Page No.9, Item No.3.6.9)
| Each | 365.12 | 365.12 | 2.0 | False | None | None | False | None | False | 730.24 | 0 | | 2984198 | 98977 | None | 1.5.1 | Supplying and fixing PVC/metal conduit Deep junction box 19/20 mm deep Junction box (UNI SR Vol-6, PWD Elec SR 2 - 2023-24 Page No. 2, Item No.1.5.1)
| Each | 54.88 | 54.88 | 60.0 | False | None | None | False | None | False | 3292.8 | 0 | | 2984199 | 98977 | None | 6.5.2 | Supplying wall mounting fan suitable to operate at single- phase 230v AC. supply. 400 mm Sweep (UNI SR Vol-6, PWD Elec SR 2 - 2023-24, Pg No.30, Item No.6.5.2 )
| Each | 3597.44 | 3597.44 | 2.0 | False | None | None | False | None | False | 7194.88 | 0 | | 2984200 | 98977 | None | 6.4.2 | Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/19 and also comply with IS: 1709/1984with latest amendment, Rated voltage 220 V/50 Hz, Rated power upto 35 W +/- 10 %, Rated current As per IS:374/19, Rated power factor 0.9 lagging(min), Rated speed 350 +/- 10% RPM, Rated air delivery 210 +/- 10% Cubic Meter Minimum, Rated service value 6.2 CMM / W, Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201, as per IS specification, Motor winding. Temp rise Shall not exceed 75 deg C over and ambient of 40 0C by resistance method at 245 V, Insulation resistance Shall not be less than Two Mega Ohms (2M Ohms), Leakage current Should not exceed 210 Micro Amp, Power input, W& current, Air Delivery & Fan Speed as per IS:374/2019 with latest amendment, 2year manufacturer Warranty. (BLDC) 56" Sweep 5 Star (1400 mm) (UNI SR Vol-6, PWD Elec SR 2 - 2023-24, Pg No.30, Item No.6.4.2 )
| Each | 4204.48 | 4204.48 | 2.0 | False | None | None | False | None | False | 8408.96 | 0 | | 2984201 | 98977 | None | 13.10 | Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring. ( UNI SR Vol-6, PWD Elec SR 2 - 2023-24 Page No.57, Item No. 13.10)
| Each | 191.52 | 191.52 | 2.0 | False | None | None | False | None | False | 383.04 | 0 | | 2984202 | 98977 | None | 11.3.2 | Supplying of .feet -PVC Batten with integrated LED tube . W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 4' - 20/22 W (UNI SR Vol-6, PWD Elec SR 2 - 2023-24, Page No.43, Item No.11.3.2) | Each | 772.8 | 772.8 | 8.0 | False | None | None | False | None | False | 6182.4 | 0 | | 2984203 | 98977 | None | 13.11 | Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of 23/0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired (UNI SR Vol-6, PWD Elec SR 2 - 2023-24, Page No.57, Item No.13.11)
| Each | 352.8 | 352.8 | 8.0 | False | None | None | False | None | False | 2822.4 | 0 | | 2984204 | 98977 | None | 13.7.1 | Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamps : On wall/ ceiling / Rafter / Girders (UNI SR Vol-6, PWD Elec SR 2 - 2023-24, Page No. 56 Item No.13.7.1)
| Each | 136.64 | 136.64 | 2.0 | False | None | None | False | None | False | 273.28 | 0 | | 2984205 | 98977 | None | 3.14.6 | Supplying And fixing/replacing of 6/16/32A electrical
accessories on existing switch board. 6A Pendant Holder (UNI SR Vol-6, PWD Elec SR 2 - 2023-24, Page No 10, Item No.3.14.6)" | No | 79.52 | 79.52 | 33.0 | False | None | None | False | None | False | 2624.16 | 0 | | 2984206 | 98977 | None | 5.20.10 | Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. : 63 A 4 pole (UNI SR Vol-6, PWD Elec SR 2 - 2023-24 Page No 18, Item No.5.20.10)
| Each | 6210.4 | 6210.4 | 2.0 | False | None | None | False | None | False | 12420.8 | 0 | | 2984207 | 98977 | None | 5.18.5 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 40 A DP (UNI SR Vol-6, PWD Elec SR 2 - 2023-24, Page No 17, Item No.5.18.5)
| Each | 1187.2 | 1187.2 | 2.0 | False | None | None | False | None | False | 2374.4 | 0 | | 2984208 | 98977 | None | 3.13.6 | Supplying and fixing of metal clad industrial plugs and
sockets. 2pole+earth 250V SOCKET 32A (UNI SR Vol-6, PWD Elec SR 2 - 2023-24, Page No 9, Item No.3.13.6)"
| Each | 747.08 | 747.08 | 2.0 | False | None | None | False | None | False | 1494.16 | 0 | | 2984209 | 98977 | None | 5.7.2 | Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.32 A (UNI SR Vol-6, PWD Elec SR 2 - 2023-24, Page No 14, Item No.5.7.2 )
| Each | 269.92 | 269.92 | 3.0 | False | None | None | False | None | False | 809.76 | 0 | | 2984210 | 98977 | None | 7.2.2 | Supplying .litres capacity vertical/horizontal type wall mounting Electrical water heater with 22 SWG copper/SS sheet metal inner Container tinned inside Fiber body outside, filled with glass wool between inner and outer container for thermal insulation complete. The inlet and outlet pipes so arranged that water flow inside results in water to flow out from the inner container without turbulence. The Inner container shall have direct immersion type copper tube nickel plate. 2kW capacity element with a neon indicator fitted with 20A capacity 25 to 85 degree Centigrade range thermostat. The water heater shall completely be wired with 40/0.0076 inch 3 core copper flexible wire of 1.5 meters length and the outer container provided with heavy gauge brackets for wall mounting : 5 Star With Fibre body 35 L (UNI SR Vol-6, PWD Elec SR 2 - 2023-24, Page No 27 / Item No.7.2.2)
| Each | 17404.8 | 17404.8 | 4.0 | False | None | None | False | None | False | 69619.2 | 0 | | 2984211 | 98977 | None | 13.15.2 | Erection charges for fixing a . litres capacity wall mounting electric geysers using bolts, flat at one end nut and washers at the other end for through bolts and nuts and washers with 150x450x600mm back plate and wiring complete with 15A 3 pin top : 35 to 50 Litres (UNI SR Vol-6, PWD Elec SR 2 - 2023-24, Page No 57, Item No.13.15.2)
| Each | 781.76 | 781.76 | 4.0 | False | None | None | False | None | False | 3127.04 | 0 | | 2984212 | 98977 | None | 22.10 | Making and Fixing pot head for UG Cable only (UNI SR Vol-6, ESCOM SR 2023-24, Page No 52, Item No.22.10)
| Set | 318.08 | 318.08 | 1.0 | False | None | None | False | None | False | 318.08 | 0 | | 2984213 | 98977 | None | 6.1 | Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply (UNI SR Vol-6,PWD Elec SR 2 - 2023-24, Page No 30, Item No. 6.1)
| Each | 1671.04 | 1671.04 | 4.0 | False | None | None | False | None | False | 6684.16 | 0 | | 2984214 | 98977 | None | 32.11 | 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 (Part-1) 50 Sqmm, 3.5 Core, (16 GI Strips - 4 x 0.8 mm) (UNI SR Vol-6, PWD Elec SR 2 - 2023-24, Page No 13, Item No. 32.11) 3.5 core 50 sqmm
| m | 200.45 | 200.45 | 75.0 | False | None | None | False | None | False | 15033.75 | 0 | | 2984215 | 98977 | None | 1.6.1 | Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work. In all kinds of soils. Depth upto 1.50m (UNI SR Vol-I 2023-24, Page No 6, Item No. 1.6.1)
| m | 542.08 | 542.08 | 50.0 | False | None | None | False | None | False | 27104.0 | 0 | | 2984216 | 98977 | None | 21.06 | Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff (UNI SR Vol-6, ESCOM 2023-24, Page No 52, Item No. 21.06)
| m | 34.88 | 34.88 | 60.0 | False | None | None | False | None | False | 2092.8 | 0 | | 2984217 | 98977 | None | 66.04 | Supply and laying double walled corrugated (DWC) HDPE Pipe including all necessary connecting Sockets/ Couplings/ Tees/ Bends/ End-caps of same materials in existing trench as per IS 14930 part -II suitable for drawing underground cables. 50mm OD / 42mm ID (UNI SR Vol-6, ESCOM 2023-24, Page No 30, Item No. 536/66.04)
| m | 95.22 | 95.22 | 60.0 | False | None | None | False | None | False | 5713.2 | 0 | | 2984218 | 98977 | None | 12.57 | Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode.The funnel should be enclosed in a CC chamber of 400x400x400 mm with a cast iron cover. The earth electrode shall have staggered holes of 12 mm dia and the electrode should be covered 150 mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts. (UNI SR Vol-6, PWD Elec SR 2 - 2023-24, Page No 54, Item No. 12.57)
| No | 4766.72 | 4766.72 | 1.0 | False | None | None | False | None | False | 4766.72 | 0 |
|