createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1709540337468 version 4 createdDate None modifiedDate None tenderType RFQ evaluationType ONE_COVER evaluationTypeText One Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 500.00 emd 37500.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 26-03-2024 16:00:00 tenderQueryClose 19-03-2024 15:00:00 technicalBidOpen None publishedDate 05-03-2024 13:54:42 publishedByPost RDPR_EE_DIV_DWD publishedByUser KPE14049 - KRISHNAMURTHY B CHATE bidValidityPeriod 90 noOfCalls 1 preBidMeetingDate None preBidMeetingYn False preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn None percentageRateTypeText None contactPerson K.B.Chate splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08362442316 mobileNumber None tenderSupplierList None
tenderSchedule	createdTs 1709540337531 version 6 createdDate None modifiedDate None tenderNumber RDPR/2023-24/BD/WORK_INDENT5054 title Construction Of Anganwadi Building No 03 At Hangaraki Village Dharwad Taluk description Construction Of Anganwadi Building No 03 At Hangaraki Village Dharwad Taluk category WORKS categoryText Works ecv 1497602.43 deptName Rural Development and Panchayat Raj Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 843 locationName RDPR Division Office Daharwad provisionalAmount 1500000.0 groupOverheadTotal 228447.83 fileNumber AEE
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1709540338000 0 None None Buildings Construction Of Anganwadi Building No 03 At Hangaraki Village Dharwad Taluk 1269154.6 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 2902294 95311 None 1.15.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In ordinary/soft rock without blasting upto 1.5 m depth Cum 363.0 363.0 42.71 False None None False None False 15503.73 0 2902295 95311 None 2.1.3 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates Cum 5989.0 5989.0 5.82 False None None False None False 34855.98 0 2902296 95311 None 2.2.3 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 6336.0 6336.0 8.41 False None None False None False 53285.76 0 2902297 95311 None Page no-116 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Add 70% for Centering form work For Footing Sqm 4435.2 4435.2 5.18 False None None False None False 22974.336 0 2902298 95311 None Page no-116 Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Add 50% for Centering form work For Plinth Beam Sqm 3168.0 3168.0 3.23 False None None False None False 10232.64 0 2902299 95311 None 5.2 Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 6618.0 6618.0 25.81 False None None False None False 170810.58 0 2902300 95311 None 1.9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m Cum 204.0 204.0 42.71 False None None False None False 8712.84 0 2902301 95311 None 1.8 Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all othe appurtenaces required to complete the work Cum 433.0 433.0 36.15 False None None False None False 15652.95 0 2902302 95311 None 6.4 Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement: 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 7036.0 7036.0 27.68 False None None False None False 194756.48 0 2902303 95311 None 2.1.4 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 (M10) Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates Cum 6217.0 6217.0 7.64 False None None False None False 47497.88 0 2902304 95311 None 2.5.1 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 6630.0 6630.0 21.54 False None None False None False 142810.2 0 2902305 95311 None Page-116 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Add 70% for Centering form work For Column Sqm 4641.0 4641.0 3.42 False None None False None False 15872.22 0 2902306 95311 None Pagr no-116 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Add 60% for Centering form work For Lintel & Roof Beam Sqm 3978.0 3978.0 4.92 False None None False None False 19571.76 0 2902307 95311 None Page no-116 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Add 45% for Centering form work For Chajja Sqm 2983.5 2983.5 1.67 False None None False None False 4982.445 0 2902308 95311 None Page no-116 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Add 50% for Centering form work For Slab Sqm 3315.0 3315.0 9.23 False None None False None False 30597.45 0 2902309 95311 None Page no 116 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Add 5% for Centering form work For Septic tank Sqm 331.5 331.5 2.3 False None None False None False 762.45 0 2902310 95311 None 2.11 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Kg 89.46 89.46 1649.45 False None None False None False 147559.797 0 2902311 95311 None 8.4.1 Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 323.0 323.0 66.14 False None None False None False 21363.22 0 2902312 95311 None 8.7 Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 366.0 366.0 194.61 False None None False None False 71227.26 0 2902313 95311 None 8.9 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqm 385.0 385.0 129.58 False None None False None False 49888.3 0 2902314 95311 None 9.36 Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab , including cost of materials, labour, curing, polishing complete as per specifications. Sqm 1650.0 1650.0 24.84 False None None False None False 40986.0 0 2902315 95311 None 12.12 Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications. Cum 124202.0 124202.0 0.309 False None None False None False 38378.418 0 2902316 95311 None 12.18 Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with, stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures Sqm 6576.0 6576.0 8.19 False None None False None False 53857.44 0 2902317 95311 None 11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Kg 168.0 168.0 164.25 False None None False None False 27594.0 0 2902318 95311 None 11.5.1 Providing and fixing 1mm thick M.S. sheet with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge Sqm 4478.0 4478.0 6.57 False None None False None False 29420.46 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1709540340000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1709540340000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1709540340000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1709540340000 0 None None ELIGIBILITY Department Registration Details None 1709540340000 0 None None ELIGIBILITY Total value of civl engineering works executed and payments received in the last five years (year-wise) None 1709540340000 0 None None ELIGIBILITY List of existing commitments and ongoing work None 1709540340000 0 None None ELIGIBILITY List of works for which tenders already submitted None 1709540340000 0 None None ELIGIBILITY Banker Details None 1709540770000 0 None None ELIGIBILITY It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. None 1709540777000 0 None None ELIGIBILITY The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end. None 1709540784000 0 None None ELIGIBILITY EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection. None 1709540800000 0 None None ELIGIBILITY Tender schedule will be issued against the e-Payment / NEFT / Credit Card / Debit Card / OTC. None 1709540811000 0 None None ELIGIBILITY Any damage during the progress of work, the damage cost should be beared by the contractor. None 1709540819000 0 None None ELIGIBILITY Any addition / Ommission / alteration will be reserved by the under signed None 1709540827000 0 None None ELIGIBILITY Tender processing fee will not be refundable or exchangeable in case of cancellation of tender None 1709540835000 0 None None ELIGIBILITY Contractor should made an agreement within 20 days of tender acceptance date and work should be carried out with in the 1 week time after agreement. If not tender will be cancelled at the contractors own risk and cost None 1709540846000 0 None None ELIGIBILITY Security deposit at the rate of 5% of tender cost should be made in favour of Executive Engineer in the form of DD / FDR / NSC (NSC should be fledge in the name of Executive Engineer) None 1709540853000 0 None None ELIGIBILITY Acceptence / Cancellation of the tenders are reserved by under signed without any reasons for the same None 1709540860000 0 None None ELIGIBILITY The work should be carried out in accordance with the standard specifications specified by the department. The defect liability period for all these works shall not be less than 1 year & the contrator shall have to give guarantee for 1 year maintanance. None 1709540868000 0 None None ELIGIBILITY The rates quoted by contractor shall include for structural design & drawing duly certified by the competent authority. The Tenderer whose tender is accepted shall furnish withing 15 days the structural design & drawings in 3 sets for scrutining to the competent authority. The contractor shall furnish 3 sets of design & drawings (approved) to the Engineer-in-charge and keep one set at site of work. The safe bearing capacity shall be got tested before submission of the drawings. None 1709540878000 0 None None ELIGIBILITY If the rates quoted by the Contractor is lesser than the amount put to tender, the difference cost should be paid by the contractor, through DD / FDR / NSC in the favour of Executive Engineer at the time of Agreement None 1709540889000 0 None None ELIGIBILITY The Contractor shall quote the rates without adding GST for either materials or works contract Service. GST payable by the Contractor under this works contract will be paid to the contractor seperately over the contractors bid amount as per Govt order No PWD 65 RDF 2017,dtd:11-10-2018 None 1709540900000 0 None None ELIGIBILITY Contractor should obey with the above conditions in addition to the KW-1. None 1709541224000 0 None None ELIGIBILITY Liquid assets and /or availability of credit facilities of not less than Rs 4.49 lakhs (30% of amount put to tender) (Credit lines/ letter of credit/ certificates from Nationalized banks for meeting the fund requirement etc.) for particularly this work only. (Unconditional) in given format None 1709541233000 0 None None ELIGIBILITY To qualify for award of this contract each tenderer in his name should have in the last five years period (i.e., 2018-19 to 2022-23) Turnover Certificate obtained from Charted Accountant and achieved in at least two financial years an average Annual Financial Turnover (in all classes of civil Engineering construction works only) of Rs.14,97,602.43 (usually not less than the estimated cost under this contract None 1709541240000 0 None None ELIGIBILITY In last five years (i.e., 2018-19 to 2022-23) Satisfactorily completed as a prime contractor for at least one similar nature of work done 50% of the cost of the work i.e., not less than the amount Rs 7.49 lakhs, certificate issued from the rank of Executive Engineer and above for the same should be furnished by the contractor. None 1709541247000 0 None None ELIGIBILITY Contractor should not quote above SR Rate. None 1709541322000 0 None None ELIGIBILITY Contractor should complete the work 6 months. None 1709625317000 1 None None ELIGIBILITY To qualify for award of this contract, each Tenderer in its name should have in the last five years Executed in any one year, the following minimum 80 Perc quantities of work in last five years 1. Earthwork-34.728 Cum 2. RCC-PCC-32.144 Cum 3 Stone Masonry-20.648 Cum 4. Embankment-28.92 Cum 5. BBM-22.144 Cum 6. TMT Steel-4352.88 Kg 7. Plastering-390.33 Sqm 8 Flooring-19.872 Sqm. None
preQualCriterionList	None
technicalCriterionList	None
tenderCriterionDocumentList	documentName optional documentTypeText Contractor should upload KPWD renewal registration copy. True Technical Bid To qualify for award of this contract each tenderer in his name should have in the last five years period that is 2018-19 to 2022-23. Turnover Certificate with balance sheet obtained from Charted Accountant and achieved in at least two financial years Annual Financial Turnover in all classes of civil Engineering construction works only of Rs14,97,602.43 usually not less than the estimated cost under this contract with UDIN. True Technical Bid In last five years That is 2018-19 to 2022-23 Satisfactorily completed as A prime contractor for at least one similar nature of work done work 50 Percent of the cost of the work that is not less than the amount Rs.7.49 lakhs Certificate issued from the rank of Executive Engineer and above for the same should be furnished by the contractor. True Technical Bid To qualify for award of this contract, each Tenderer in its name should have in the last five years Executed in any one year, the following minimum 80 Perc quantities of work in last five years. 1. Earthwork-34.728 Cum 2. RCC-PCC-32.144 Cum 3 Stone Masonry-20.648 Cum 4. Embankment-28.92 Cum 5. BBM-22.144 Cum 6. TMT Steel-4352.88 Kg 7. Plastering-390.33 Sqm 8 Flooring-19.872 Sqm. True Technical Bid Liquid assets and /or availability of credit facilities of not less than Rs.4.49 lakhs. That is 30 Percent of amount put to tender. Credit lines/ letter of credit/ certificates from Nationalized banks for meeting the fund requirement etc. for particularly this work only. Unconditional True Technical Bid The contractor should scan the GST Certificate. True Technical Bid The contractor should scan the PAN card. True Technical Bid Calculation sheet of Bidder Capacity AxNX2.5-B True Technical Bid Contractors Postal address and Mobile No True Technical Bid
tenderWorkLocationList	tenderSubEstimateName districtName taluqName loksabhaContName assemblyContName locationDescription latitudeDegrees latitudeMinutes latitudeSeconds longitudeDegrees longitudeMinutes longitudeSeconds Buildings Dharwad Dharwad Dharwad North DHARWAD Hangaraki None None None None None None
tenderAddress	None
tenderRecallDTO	None