| 1709468944000 | 0 | None | None | Water supply/sewage lines | Construction of Cistern and Laying pipeline near Nalaband house at 10 no ward 2 Construction of RO plant In front of Veena Patil house | 561863.15 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 2897009 | 94974 | None | 001 | Water purification plants: Providing, Installation and Commissioning of automatic Water purification plant (RO+UF) with all accessories piping, product water tank on single phase power supply as per the enclosed detailed Technical Specifications including cost of material, loading
and unloading and as directed by the Engineer in charge. (Ref- detailed specification enclosed seperatly). Note:- 1.The above rates mentioned are only for the preparation of estimate purpose. 2. All items are to be of BSI /NFS standards,with BSI / NFS mark . 3. Tenders to be invited for procurement. 4. No direct payment should be made under any situation or condition or on any account. 5. After commissioning of plant necessary testing to be done for the satisfactory of Engineer Incharge. Note : Refer the ANNEXURE : F for Detailed Specification of Each For 500 LPH FRP Skid Type : PWD Common DSR 2023-24 Volume 5 (P No: 247 I.No:21.1.8 ) | Each | 322350.0 | 322350.0 | 1.0 | False | None | None | False | None | False | 322350.0 | 0 | | 2897010 | 94974 | None | 002 | Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. (KPWD Common DSR 2023-24 Volume 1 (P.No.5; I. No.1.4.1) | Cum | 254.1 | 254.1 | 5.48 | False | None | None | False | None | False | 1392.468 | 0 | | 2897011 | 94974 | None | 003 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates. KPWD Common DSR 2023-24 Volume 1 (P No: 15 I.No:2.1.2 ) | Cum | 5947.2 | 5947.2 | 0.915 | False | None | None | False | None | False | 5441.688 | 0 | | 2897012 | 94974 | None | 004 | Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) PWD Common DSR 2023-24 Volume 2 (P No: 9 I.No:5.2 ) | Cum | 6948.9 | 6948.9 | 5.7645 | False | None | None | False | None | False | 40056.93405 | 0 | | 2897013 | 94974 | None | 005 | Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) PWD Common DSR 2023-24 Volume 2 (P No: 9 I.No:5.3 ) | Cum | 6515.25 | 6515.25 | 2.086 | False | None | None | False | None | False | 13590.8115 | 0 | | 2897014 | 94974 | None | 006 | Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lin ing, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge.PWD Common DSR 2023-24 Volume 2 (P No: 44 I.No:8.19.1) | Sqm | 267.75 | 267.75 | 5.49 | False | None | None | False | None | False | 1469.9475 | 0 | | 2897015 | 94974 | None | 007 | Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work.KPWD Common DSR 2023-24 Volume 1 (P No: 7 I.No:1.8 ) | Cum | 497.7 | 497.7 | 3.51 | False | None | None | False | None | False | 1746.927 | 0 | | 2897016 | 94974 | None | 008 | Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery,curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates .KPWD Common DSR 2023-24 Volume 1 (P No: 16 I.No:2.3.1) | Cum | 6639.15 | 6639.15 | 1.575 | False | None | None | False | None | False | 10456.66125 | 0 | | 2897017 | 94974 | None | 009 | KSRB 7.16: Providing, fabricating, assembling and fixing in position aluminium shutters to the existing door frame in the partition using 47.62x44.45mm section thickness 3.18mm, weight 1.505kg/m for vertical frame; 47.62x44.45 thickness of 3mm, weight 1.42kg/m for top section, 49.91mmx44.45mm with wall thickness 3mm, weight 1.495kg/m for central rail; and 114.3mmx44.45mm thickness 3.18mm, weight 2.646kg/m for bottom rail; aluminium sections and cut to length joint metred and corners grinded, the bottom rail and top rail hinged or pivoted, opening arrangements including providing and fixing standard approved accessories, such as aluminium handles, tower bolts, lock, pivots: hinges PVC. or rubber gasket, 12mm prelaminated sheets (Novopan) exterior grade of approved colour both sides same colour for bottom panel of maximum height 0.90m and 5.5mm thick plain glass for top panel (Novopan) and glass fixed with glazed clips 19mmx17.3mmx11mm, 0.9mm thick, weight 0.124kg/m; aluminium sections treated for removal of any rust and prevention of further rust formation, and coated with greasy materials for non-adherance of mortars or any other sticky materials, including cost of materials, fixtures, labour and HOM complete as per specifications.-do- using aluminium section anodized to 12- 15 microns. | Sqm | 3532.2 | 3532.2 | 23.31 | False | None | None | False | None | False | 82335.582 | 0 | | 2897018 | 94974 | None | 010 | Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work.In all kinds of soils Depth upto 1.5 m .(KPWD Common DSR 2023-24 Volume 1 (P No: 5 I.No:1.4.1 ) | Cum | 254.1 | 254.1 | 0.68 | False | None | None | False | None | False | 172.788 | 0 | | 2897019 | 94974 | None | 011 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates. KPWD Common DSR 2023-24 Volume 1 (P No: 15 I.No:2.1.2 ) | Cum | 5947.2 | 5947.2 | 2.9 | False | None | None | False | None | False | 17246.88 | 0 | | 2897020 | 94974 | None | 012 | Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)(KPWD Common DSR 2023-24 Volume 2 (P No: 9 I.No:5.3 ) | Cum | 6515.25 | 6515.25 | 1.69 | False | None | None | False | None | False | 11010.7725 | 0 | | 2897021 | 94974 | None | 013 | Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lin ing, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge. (KPWD Common DSR 2023-24 Volume 2 (P No: 44 I.No:8.19.1 ) | Sqm | 267.75 | 267.75 | 3.6 | False | None | None | False | None | False | 963.9 | 0 | | 2897022 | 94974 | None | 014 | Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery,curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates .KPWD Common DSR 2023-24 Volume 1 (P No: 16 I.No:2.3.1) | Cum | 6639.15 | 6639.15 | 0.23 | False | None | None | False | None | False | 1527.0045 | 0 | | 2897023 | 94974 | None | 015 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank KPWD Common DSR 2023-24 Volume 2 (P No: 123 I.No:13.34) | l | 9.45 | 9.45 | 1000.0 | False | None | None | False | None | False | 9450.0 | 0 | | 2897024 | 94974 | None | 016 | Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge ( KPWD Common DSR 2023-24 Volume 2 (P No: 45 I.No:8.29) | Sqm | 297.15 | 297.15 | 3.6 | False | None | None | False | None | False | 1069.74 | 0 | | 2897025 | 94974 | None | 017 | Providing and fixing brass bib cock of approved quality 20 mm nominal bore ( KPWD Common DSR 2023-24 Volume 2 (P No: 117 I.No:13.2.2) | Each | 320.25 | 320.25 | 2.0 | False | None | None | False | None | False | 640.5 | 0 | | 2897026 | 94974 | None | 018 | Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) complete Medium Duty GI pipe of 20mm dia ( KPWD Common DSR 2023-24 Volume 5 (P No: 127 I.No:11.2.2) | Sqm | 257.25 | 257.25 | 1.8 | False | None | None | False | None | False | 463.05 | 0 | | 2897027 | 94974 | None | 019 | Supply and delivery at site wrought middle steel (galvanized) GI bend confirming to IS 1239-II, 1991 with latest amendments if any. For 20 mm dia GI BEND ( KPWD Common DSR 2023-24 Volume 5 (P No: 130 I.No:11.8.2) | Each | 128.1 | 128.1 | 2.0 | False | None | None | False | None | False | 256.2 | 0 | | 2897028 | 94974 | None | 020 | Supply and delivery at site wrought middle steel (galvanized) GI tee confirming to IS 1239-II, 1991 with latest amendments if any. For 20 mm dia GI TEE ( KPWD Common DSR 2023-24 Volume 5 (P No: 130 I.No:11.9.2) | Each | 112.35 | 112.35 | 2.0 | False | None | None | False | None | False | 224.7 | 0 | | 2897029 | 94974 | None | 021 | Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) Heavy Duty GI pipe of 32mm dia etc. complete..(KPWD Common DSR 2023-24 Volume 5 (P No: 127 I.No:11.3.4 ) | m | 449.4 | 449.4 | 89.0 | False | None | None | False | None | False | 39996.6 | 0 |
|