createdTs	None
version	None
createdDate	None
modifiedDate	None
noticeInvitingTenderDTO	createdTs 1716550235904 version 5 createdDate None modifiedDate None tenderType RFQ evaluationType ONE_COVER evaluationTypeText One Cover invitingStrategy OPEN invitingStrategyText Open taxType INCLUSIVE_TAX tenderFee 1020.00 emd 96000.00 bidValueType ITEM_WISE bidValueTypeText Item wise tenderReceiptClose 03-06-2024 16:30:00 tenderQueryClose 03-06-2024 15:30:00 technicalBidOpen None publishedDate 25-05-2024 08:06:59 publishedByPost RDPR_EE_DIV_BLR publishedByUser KPE11866 - BADIGER PAMPATHY SURESHKUMAR bidValidityPeriod 90 noOfCalls 2 preBidMeetingDate None preBidMeetingYn False preQualificationBidOpen None denominationType RUPEES denominationTypeText Rupees retenderedYn True percentageRateTypeText None contactPerson EE PRE DIVISION BALLARI splitEmdRequiredYn False emdBankGuarantee None emdCash None bgValidityPeriod None hideWeightage None multipleCurrencySelectionAllowedYn False isTechWeightageAllowed False highestBidderSelection False isVariableEmdAllowed None qcbsTenderYn None itemwiseEmdRequiredYn None sampleSubmissionDate None officeNumber 08392266173 mobileNumber None tenderSupplierList None
tenderSchedule	createdTs 1716550235906 version 12 createdDate None modifiedDate None tenderNumber RDPR/2023-24/BD/WORK_INDENT5393/CALL-2 title Construction Of Staff Toilet Buildings At Ghs Kps Bandri,Ghps Kps Bandri ,Ghps & Ghs Hk Halli ,Ghps & Ghs Nidagurthi ,Ghps Katinakamba ,C K Halli ,Hulikunti ,Huchena Halli , Bhujanga Nagara,Narasingapura ,Ghs Bomma Gatta ,Gmhps Bomma Gatta ,Ghps M Thumbaraguddhi,Yerrayyana Halli ,Thokena Halli ,Ghs M.Thumbaraguddi Villages In Sandur Tq description Construction Of Staff Toilet Buildings At Ghs Kps Bandri,Ghps Kps Bandri ,Ghps & Ghs Hk Halli ,Ghps & Ghs Nidagurthi ,Ghps Katinakamba ,C K Halli ,Hulikunti ,Huchena Halli , Bhujanga Nagara,Narasingapura ,Ghs Bomma Gatta ,Gmhps Bomma Gatta ,Ghps M Thumbaraguddhi,Yerrayyana Halli ,Thokena Halli ,Ghs M.Thumbaraguddi Villages In Sandur Tq category WORKS categoryText Works ecv 4050543.26 deptName Rural Development and Panchayat Raj Department status PUBLISHED statusText Published remarks None csrValue None ecvtenderYn True location 818 locationName RDPR Division Office Ballari provisionalAmount 4800000.0 groupOverheadTotal None fileNumber AEE/RDPR/SD/BLI/JE-2/KKRRDB/23-24/15
tenderSubEstimateList	createdTs version createdDate modifiedDate workCategoryName subEstimateName estimateTotal itemList 1716550236000 1 None None Buildings Construction of Toilet Buildings at SHS KPS Bandri, GHPS KPS Bandri, GHPS & GHS HK Halli, GHPS & GHS Nidagurthi, GHPS Katinakamba, C.K.Halli, Hulikunti, Huchenahalli, Bhujanganagar, Narsingapura, GHS Bommagatta, GMHPS Bommagatta, GHPS M Thumbaraguddhi, Yerrayyanahalli, Thokenahalli, GHS M. Thumbraguddi villages in Sandur Tq 4050543.26 id tenderSubEstimateId categoryName itemCode description uomName baseRate finalRate quantity modifyQuantityYn minQuantity maxQuantity buyBackYn buyBackValue hideYn netAmount taxCount 3161548 108840 None code01 Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m Cum 254.1 254.1 97.28 False None None False None False 24718.848 0 3161549 108840 None code02 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:5:10 Using 40 mm nominal size graded crushed coarse aggregates Cum 6123.6 6123.6 15.68 False None None False None False 96018.048 0 3161550 108840 None code03 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 5891.55 5891.55 63.04 False None None False None False 371403.312 0 3161551 108840 None code04 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 6708.45 6708.45 28.32 False None None False None False 189983.304 0 3161552 108840 None code05 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates Cum 6555.15 6555.15 7.68 False None None False None False 50343.552 0 3161553 108840 None code06 Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 m. Including cost of all labour complete as per specifications Cum 168.0 168.0 72.0 False None None False None False 12096.0 0 3161554 108840 None code07 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Cum 8387.45 8387.45 95.68 False None None False None False 802511.216 0 3161555 108840 None code08 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. Sqm 1024.8 1024.8 133.28 False None None False None False 136585.344 0 3161556 108840 None code09 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Cum 10442.25 10442.25 29.36 False None None False None False 306584.46 0 3161557 108840 None code10 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. for Building Tonne 93929.85 93929.85 2.048 False None None False None False 192368.3328 0 3161558 108840 None code11 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Kgs 176.4 176.4 680.48 False None None False None False 120036.672 0 3161559 108840 None code12 Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. m 333.9 333.9 158.4 False None None False None False 52889.76 0 3161560 108840 None code13 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately)30 mm thickness Sqm 3659.25 3659.25 50.4 False None None False None False 184426.2 0 3161561 108840 None code14 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Sqm 4454.1 4454.1 67.2 False None None False None False 299315.52 0 3161562 108840 None code15 Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 253.05 253.05 858.72 False None None False None False 217299.096 0 3161563 108840 None code16 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. Sqm 389.55 389.55 405.12 False None None False None False 157814.496 0 3161564 108840 None code17 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Sqm 1521.45 1521.45 155.52 False None None False None False 236615.904 0 3161565 108840 None code18 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. Sqm 933.45 933.45 128.32 False None None False None False 119780.304 0 3161566 108840 None code19 Distempering with 1st quality acrylic distemper (ready mixed) hav- ing VOC content less than 50 g/l, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two coats on new work to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 84.0 84.0 858.72 False None None False None False 72132.48 0 3161567 108840 None code20 Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm 93.45 93.45 405.12 False None None False None False 37858.464 0 3161568 108840 None code21 Providing and fixing white vitreous china water closet squatting pan (Indian type) : Long pattern W.C. pan of size 580 mm Sqm 1499.4 1499.4 32.0 False None None False None False 47980.8 0 3161569 108840 None code22 Providing and laying 100mm thick pre-cast cover slabs over drains & Rain pit of width not exceeding 800 mm using M20 concrete reinforced with Micro Alloyed High carbon steel with 3mm - 3ply wired steel @ 2.00 kg/m2, slabs jointed in CM 1:3 proportion and nicely finished Including providing holes in the Cover slabs wherever necessary for easy drainage of surface water including of labour, materials, scaffolding, usage of machinery, curing, lead and lift charges etc, Complete. Sqm 974.4 974.4 18.08 False None None False None False 17617.152 0 3161570 108840 None code23 Providing UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing) etc. complete for: Pipes of SN4, 110mm dia. m 302.4 302.4 128.0 False None None False None False 38707.2 0 3161571 108840 None code24 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap Each 572.25 572.25 32.0 False None None False None False 18312.0 0 3161572 108840 None code25 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm Each 736.05 736.05 32.0 False None None False None False 23553.6 0 3161573 108840 None code26 Supplying and erection of RCC rings for well steining cg 0.30m depth using M20 grade concrete using 6mm MS coil at the rate of 6kg/ring etc., complete m 1097.25 1097.25 64.0 False None None False None False 70224.0 0 3161574 108840 None code27 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Ltr 9.45 9.45 3200.0 False None None False None False 30240.0 0 3161575 108840 None code28 Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work25 mm nominal dia Pipes m 235.2 235.2 160.0 False None None False None False 37632.0 0 3161576 108840 None code29 Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 20 mm nominal dia Pipes m 180.6 180.6 160.0 False None None False None False 28896.0 0 3161577 108840 None code30 Providing and fixing C.P. Brass bib cock of approved quality conforming at IS 8931 Each 666.75 666.75 32.0 False None None False None False 21336.0 0 3161578 108840 None code31 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern Each 2098.95 2098.95 16.0 False None None False None False 33583.2 0 3161579 108840 None code32 Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. cm 4.2 4.2 400.0 False None None False None False 1680.0 0
generalCriterionList	createdTs version createdDate modifiedDate criterionType description tenderEligibilityCriterionDocumentList 1716550236000 0 None None ELIGIBILITY Tenders from Joint ventures are not acceptable. None 1716550236000 0 None None ELIGIBILITY Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka None 1716550236000 0 None None ELIGIBILITY Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. None 1716550236000 0 None None ELIGIBILITY Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs) None 1716550236000 0 None None ELIGIBILITY Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender) None 1716550236000 0 None None ELIGIBILITY Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None 1716550236000 0 None None ELIGIBILITY Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year None 1716550236000 0 None None ELIGIBILITY Total value of civl engineering works executed and payments received in the last five years (year-wise) None 1716550236000 0 None None ELIGIBILITY List of existing commitments and ongoing works None 1716550236000 0 None None ELIGIBILITY List of works for which tenders already submitted None 1716550236000 0 None None ELIGIBILITY Banker Details for reference None 1716550236000 0 None None ELIGIBILITY Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded None 1716550236000 0 None None ELIGIBILITY Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years None 1716550236000 0 None None ELIGIBILITY Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded None 1716550236000 0 None None ELIGIBILITY Proposals for subcontracting components of works amounting to more than 20% of the contract price (for each, the qualifications and experience of the identified sub-contractor in the relevant fields should be attached) None
preQualCriterionList	None
technicalCriterionList	None
tenderCriterionDocumentList	documentName optional documentTypeText Valid PWD registration certificate True Technical Bid Annual turnover certificate with valid UDIN No for last 5 years i.e., from 2018-19 to 2022-23 obtained from the Chartered Accountant and supported by the income tax returns filed by the bidder with IT departments. True Technical Bid To qualify for award of this contract, each tenderer in his name should have in the last five years period i.e. 2018-19 2019-20 2020-21 2021-22 2022-23 achieved in at least two financial years on average annual financial turnover of 100 percent of cost of the work. True Technical Bid Work done certificate for Satisfactorily completed as prime contractor, at least one similar nature of work value not less than 50 percent from Competent Authority not below the rank of Executive Engineer or equivalent And also list of such works in FORMAT-2 True Technical Bid Existing commitments and ongoing works which are yet to be completed True Technical Bid The works for which tender acceptance letters are received are to be furnished. True Technical Bid The information of the works for which tenderer has already submitted tender are to be furnished. True Technical Bid The information on litigation in which the Tenderer is involved are to be furnished. True Technical Bid Name, address, and telephone, telex, and fax numbers of the tenderers bankers who may provide references if contacted by the employer are not furnished. True Technical Bid Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under Assessed available tender capacity A X N X 2.5 - B True Technical Bid
tenderWorkLocationList
tenderAddress	None
tenderRecallDTO	None