| 3150121 | 108594 | None | code01 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m | Cum | 107.1 | 107.1 | 65.9 | False | None | None | False | None | False | 7057.89 | 0 |
| 3150122 | 108594 | None | code02 | Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. | Sqm | 123.9 | 123.9 | 110.4 | False | None | None | False | None | False | 13678.56 | 0 |
| 3150123 | 108594 | None | code03 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates | Cum | 6288.45 | 6288.45 | 24.24 | False | None | None | False | None | False | 152432.028 | 0 |
| 3150124 | 108594 | None | code04 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 7170.28 | 7170.28 | 11.23 | False | None | None | False | None | False | 80522.2444 | 0 |
| 3150125 | 108594 | None | code05 | Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) .M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 11286.56 | 11286.56 | 1.64 | False | None | None | False | None | False | 18509.9584 | 0 |
| 3150126 | 108594 | None | code06 | Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with Cement mortar 1:6 (1 cement : 6 coarse sand) | Cum | 5891.55 | 5891.55 | 20.8 | False | None | None | False | None | False | 122544.24 | 0 |
| 3150127 | 108594 | None | code07 | Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) | Cum | 6708.45 | 6708.45 | 14.99 | False | None | None | False | None | False | 100559.6655 | 0 |
| 3150128 | 108594 | None | code08 | Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) .M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 9958.73 | 9958.73 | 4.37 | False | None | None | False | None | False | 43519.6501 | 0 |
| 3150129 | 108594 | None | code09 | Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) .M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 11286.56 | 11286.56 | 3.01 | False | None | None | False | None | False | 33972.5456 | 0 |
| 3150130 | 108594 | None | code10 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | Cum | 279.3 | 279.3 | 42.26 | False | None | None | False | None | False | 11803.218 | 0 |
| 3150131 | 108594 | None | code11 | Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of bour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. | Cum | 497.7 | 497.7 | 84.8 | False | None | None | False | None | False | 42204.96 | 0 |
| 3150132 | 108594 | None | code12 | Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. | Cum | 8367.45 | 8367.45 | 24.67 | False | None | None | False | None | False | 206424.9915 | 0 |
| 3150133 | 108594 | None | code13 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates | Cum | 6555.15 | 6555.15 | 1.78 | False | None | None | False | None | False | 11668.167 | 0 |
| 3150134 | 108594 | None | code14 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse ggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 11138.4 | 11138.4 | 5.73 | False | None | None | False | None | False | 63823.032 | 0 |
| 3150135 | 108594 | None | code15 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse ggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 10094.18 | 10094.18 | 0.36 | False | None | None | False | None | False | 3633.9048 | 0 |
| 3150136 | 108594 | None | code16 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse ggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates | Cum | 10442.25 | 10442.25 | 16.38 | False | None | None | False | None | False | 171044.055 | 0 |
| 3150137 | 108594 | None | code17 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.Canal & Allied Works | Tonne | 94510.5 | 94510.5 | 3.74 | False | None | None | False | None | False | 353469.27 | 0 |
| 3150138 | 108594 | None | code18 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. | Sqm | 4701.9 | 4701.9 | 14.67 | False | None | None | False | None | False | 68976.873 | 0 |
| 3150139 | 108594 | None | code19 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. | Sqm | 144.9 | 144.9 | 151.2 | False | None | None | False | None | False | 21908.88 | 0 |
| 3150140 | 108594 | None | code20 | Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge | Sqm | 221.55 | 221.55 | 123.24 | False | None | None | False | None | False | 27303.822 | 0 |
| 3150141 | 108594 | None | code21 | Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge | Sqm | 267.75 | 267.75 | 76.21 | False | None | None | False | None | False | 20405.2275 | 0 |
| 3150142 | 108594 | None | code22 | Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge | Sqm | 366.45 | 366.45 | 289.45 | False | None | None | False | None | False | 106068.9525 | 0 |
| 3150143 | 108594 | None | code23 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in ch | Sqm | 105.0 | 105.0 | 161.89 | False | None | None | False | None | False | 16998.45 | 0 |
| 3150144 | 108594 | None | code24 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :** Flamed finish granite stone slab Black, Cat Eye, River Pink or equivalen | Sqm | 2589.3 | 2589.3 | 109.13 | False | None | None | False | None | False | 282570.309 | 0 |
| 3150145 | 108594 | None | code25 | Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications | Sqm | 1461.6 | 1461.6 | 5.4 | False | None | None | False | None | False | 7892.64 | 0 |
| 3150146 | 108594 | None | code26 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 133.35 | 133.35 | 225.69 | False | None | None | False | None | False | 30095.7615 | 0 |
| 3150147 | 108594 | None | code27 | Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 182.7 | 182.7 | 189.82 | False | None | None | False | None | False | 34680.114 | 0 |
| 3150148 | 108594 | None | code28 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. | Sqm | 120.75 | 120.75 | 33.01 | False | None | None | False | None | False | 3985.9575 | 0 |
| 3150149 | 108594 | None | code29 | Supply of chairs | Each | 1500.0 | 1500.0 | 10.0 | False | None | None | False | None | False | 15000.0 | 0 |
| 3150150 | 108594 | None | code30 | STAFF / OFFICE TABLE :Size 48” X 24” X 30” With One drawers and One Locker on the right side of the table with locking system. With leg section of 25 dia 20 gauge the top shall be of 20 mm thick laminated black board with wooden border around. The table shall be derusted premier coated with synthetic enamel paint. All components should be made of 20 | Each | 7000.0 | 7000.0 | 4.0 | False | None | None | False | None | False | 28000.0 | 0 |
| 3150151 | 108594 | None | code31 | STEEL SLOTTED ANGLE RACK:SIZE: 72HX36WX14D.Overall with 5plates shall be slotted angle of 40”x15”x2mm Panels of Size 36”x15”x20”g the panels should be fixed tothe upright by means of GI bolts of Size 8mmx16mm by providing 16 No’s of standard gussests at aorners. The rack shall be derusted primer coated &Spray Painted with synthetic enameles paint. | Each | 10000.0 | 10000.0 | 4.0 | False | None | None | False | None | False | 40000.0 | 0 |
| 3150152 | 108594 | None | code32 | STEEL ALMAIRAH 6' 1/2" Office type : Size:78”H x 35”W x 18”D (Including leg of 6”) fitted with four fixed shelves making five compartments double door with two way locking device and duplicate Keys, all joints outside and inside should be spot or arc welding and neatly finished by grinding. The almairah made by 18/20 gauge CR sheet.The outside corners should be properly bent to U shape of 25mm width to ensure good strength and the
outer edge of U-bent of the door lengthwise should be double folder and neatly finished. The shelves front side should be bent to U shape neatly and finished to avoid any possible cuts to fingers and hand when handled. Longitudinal rib of 15.24 cm wide including
bent to required shape should be provided and fixed to each door at its centre. The breadth of the shelf in the almairah should be to the entire width leaving about 12mm gap from the shutter when it is. closed. LOCKING DEVICE:Three way locking device with 10 gauge M.S. sheet for locking and leave plate and with locking rod of 10 mm dia with strong bracket at the top and bottom to hold the locking rod with six lever strong lick to be fixed. Handle should be made out of brass cast alloy with nickel chrome plated. Lock should be Good Quality. | Each | 20000.0 | 20000.0 | 1.0 | False | None | None | False | None | False | 20000.0 | 0 |
| 3150153 | 108594 | None | code33 | ELECTRICAL work: Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thickconfirming to IS 2509 with suitable size bends, metal/PVC Junctionboxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using bindingwires and unused ways of junction boxes and pipe ends should becovered using PVC end enclosures, run with 18SWG GI fish wirewherever necessary 19/20 mm dia 2mm thick | Mtr | 69.3 | 69.3 | 100.0 | False | None | None | False | None | False | 6930.0 | 0 |
| 3150154 | 108594 | None | code34 | Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thickconfirming to IS 2509 with suitable size bends, metal/PVC Junctionboxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using bindingwires and unused ways of junction boxes and pipe ends should becovered using PVC end enclosures, run with 18SWG GI fish wirewherever necessary 25 mm dia 2mm thick | Mtr | 81.9 | 81.9 | 100.0 | False | None | None | False | None | False | 8190.0 | 0 |
| 3150155 | 108594 | None | code35 | Supplying and fixing sheet Metal box made out of 18 SWG sheetmetal with necessary holes for cable/conduit entry as required with onecoat of primer of approved make etc 75x75x65mm | Each | 111.3 | 111.3 | 3.0 | False | None | None | False | None | False | 333.9 | 0 |
| 3150156 | 108594 | None | code36 | Supplying and fixing PVC/metal conduit Deep junction box 19/20mm Deep Junction Box | Each | 51.45 | 51.45 | 10.0 | False | None | None | False | None | False | 514.5 | 0 |
| 3150157 | 108594 | None | code37 | Supplying And Fixing Metal Fan Box with Round Hook. | Nos | 122.85 | 122.85 | 6.0 | False | None | None | False | None | False | 737.1 | 0 |
| 3150158 | 108594 | None | code38 | Supplying and wiring adopting loop system in existing PVCConduit /casing capping using 2x1.5Sqmm (Phase & Neutral) &1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulatedcopper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existingplastic sheet/ gang box, the other end of the wires shall be terminatedwith sufficient loose length in a wood/PVC round block. complete foreach outlet. A Short piont up to 3 Mtr from tapping piont out let via switch. | Point | 299.5 | 299.5 | 15.0 | False | None | None | False | None | False | 4492.5 | 0 |
| 3150159 | 108594 | None | code39 | Supplying and wiring adopting loop system in existing PVCConduit /casing capping using 2x1.5Sqmm (Phase & Neutral) &1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulatedcopper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existingplastic sheet/ gang box, the other end of the wires shall be terminatedwith sufficient loose length in a wood/PVC round block. complete foreach outlet. A Short piont up to 6 Mtr from tapping piont out | Point | 413.7 | 413.7 | 15.0 | False | None | None | False | None | False | 6205.5 | 0 |
| 3150160 | 108594 | None | code40 | Wiring for lighting/power circuit using one of FRLS PVC insulated1100V grade, multistrand copper wire with low conductor resistancesingle core in open or concealed system of wiring with specified IS694:2010 1.5 mm2 | Mtr | 27.3 | 27.3 | 300.0 | False | None | None | False | None | False | 8190.0 | 0 |
| 3150161 | 108594 | None | code41 | Wiring for lighting/power circuit using one of FRLS PVC insulated1100V grade, multistrand copper wire with low conductor resistancesingle core in open or concealed system of wiring with specified IS694:2010 2.5 mm2 | Mtr | 44.1 | 44.1 | 300.0 | False | None | None | False | None | False | 13230.0 | 0 |
| 3150162 | 108594 | None | code42 | Supplying and fixing superior quality modular switch mountingpolycarbonate plate with necessary supporting back plate with requirednos. of machine screws, bolts nuts etc., complete on the existingmetal/PVC box 8 Module | Each | 298.2 | 298.2 | 3.0 | False | None | None | False | None | False | 894.6 | 0 |
| 3150163 | 108594 | None | code43 | Modular Switches/Sockets/Regulators etc Supplying and fixing of modular switch & connected accessories onexisting modular switch plate as per IS 3854 and IS 1293 6Amps one way | Each | 107.1 | 107.1 | 30.0 | False | None | None | False | None | False | 3213.0 | 0 |
| 3150164 | 108594 | None | code44 | Modular Switches/Sockets/Regulators etc Supplying and fixing of modular switch & connected accessories onexisting modular switch plate as per IS 3854 and IS 1293 Stepped fan regulator | Each | 374.85 | 374.85 | 6.0 | False | None | None | False | None | False | 2249.1 | 0 |
| 3150165 | 108594 | None | code45 | Modular Switches/Sockets/Regulators etc Supplying and fixing of modular switch & connected accessories onexisting modular switch plate as per IS 3854 and IS 1293 16Amps one way switch | Each | 189.0 | 189.0 | 6.0 | False | None | None | False | None | False | 1134.0 | 0 |
| 3150166 | 108594 | None | code46 | Modular Switches/Sockets/Regulators etc Supplying and fixing of modular switch & connected accessories onexisting modular switch plate as per IS 3854 and IS 1293 6/16Amps universal socket | Each | 247.8 | 247.8 | 3.0 | False | None | None | False | None | False | 743.4 | 0 |
| 3150167 | 108594 | None | code47 | Supplying and fixing 32A security and energy saving DP switchwith key tag suitable to operate on 230 V, 50Hz AC supply &completely wired on existing box | Each | 678.3 | 678.3 | 1.0 | False | None | None | False | None | False | 678.3 | 0 |
| 3150168 | 108594 | None | code48 | Miniature Circuit Breakers Supplying & fixing miniature circuit breakers on existing MCBdistribution boards using necessary fixing materials and 'C' Typecurve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC60898 6-32 Amps SP | Each | 435.75 | 435.75 | 1.0 | False | None | None | False | None | False | 435.75 | 0 |
| 3150169 | 108594 | None | code49 | MCB Distribution Boards Supplying and fixing regular MCB distribution boards on wall/oodboard / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWGMS enclosure II - Double Door 8 Way SP & N | Each | 1946.7 | 1946.7 | 1.0 | False | None | None | False | None | False | 1946.7 | 0 |
| 3150170 | 108594 | None | code50 | Earth Electrode for Grounding Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should befilled with equal proportion of salt and charcoal 150 mm all-round thepipe to complete depth. The connection from the pipe to the conduitetc., is to be established through GI wire of size as per lSI specification7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nutsetc., the pipe shall have 16 through holes of 12 mm dia | Job | 3685.5 | 3685.5 | 1.0 | False | None | None | False | None | False | 3685.5 | 0 |
| 3150171 | 108594 | None | code51 | Ceiling Fans Supplying capacitor type ceiling fan complete with down rod blades,shackle, canopies etc, for operation on 230 V, 50 cycles. Single phaseAC supply conforming to ISS-374- 1979 and with double ball bearing system 48" Sweep (1200mm) Regular model | Each | 3133.2 | 3133.2 | 6.0 | False | None | None | False | None | False | 18799.2 | 0 |
| 3150172 | 108594 | None | code52 | PVC Batten with LED Tubes Supplying of .....feet -PVC Batten with integrated LED tube .... Wwith high quality diffuser with Life of 25000 burning hours & 70%lumen maintenance with CRI lessthan 80. Power Input: 220-240V@50/60Hz & Power factor lessthan0.9 along with CE approved. 2 yearsWarranty against any manufacturing defect working under standardelectrical condition LED light fighting 1 x4'- 20/22 w | Each | 724.5 | 724.5 | 4.0 | False | None | None | False | None | False | 2898.0 | 0 |
| 3150173 | 108594 | None | code53 | Fixing of Fan Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary length of 23 / 0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired. | Each | 330.75 | 330.75 | 6.0 | False | None | None | False | None | False | 1984.5 | 0 |
| 3150174 | 108594 | None | code54 | Bench Vice 125mm Steel Heavy-Duty Bench Vice 125mm 5 in 1 | Nos | 3000.0 | 3000.0 | 2.0 | False | None | None | False | None | False | 6000.0 | 0 |
| 3150175 | 108594 | None | code55 | Ruler (Steel) 30cm long | Nos | 20.0 | 20.0 | 8.0 | False | None | None | False | None | False | 160.0 | 0 |
| 3150176 | 108594 | None | code56 | Measuring tape measuring tape of 5 meter x 19 mm | Nos | 180.0 | 180.0 | 8.0 | False | None | None | False | None | False | 1440.0 | 0 |
| 3150177 | 108594 | None | code57 | Micrometers Type-103-137, Range - 0-25mm
Accuracy- Plus/minus2um , Mass-175g Measuring faces: Carbide tipped | Nos | 3200.0 | 3200.0 | 4.0 | False | None | None | False | None | False | 12800.0 | 0 |
| 3150178 | 108594 | None | code58 | Vernier Calipers 8" 200mm Digital LCD Caliper Vernier Gauge Micrometer Metal Housed Digital Vernier Caliper - 6 inch - 150 mm | Nos | 1050.0 | 1050.0 | 4.0 | False | None | None | False | None | False | 4200.0 | 0 |
| 3150179 | 108594 | None | code59 | Standard wire guage Imperial Wire Gauge | Nos | 250.0 | 250.0 | 4.0 | False | None | None | False | None | False | 1000.0 | 0 |
| 3150180 | 108594 | None | code60 | Filler Guage Stainless steel Accuracy: (3+T/80)um
Range: 0.03-1.00 mm
Quantity of Leaves: 32
Length: 100 mm | Nos | 450.0 | 450.0 | 4.0 | False | None | None | False | None | False | 1800.0 | 0 |
| 3150181 | 108594 | None | code61 | Dial Guage 0.001 mm X 1 mm dial gauge fitted with 8 jewels | Nos | 2200.0 | 2200.0 | 4.0 | False | None | None | False | None | False | 8800.0 | 0 |
| 3150182 | 108594 | None | code62 | Try square Metal Try Square - angle cut 45Deg/ 90Deg, Casting handle with hardened blade, Engraving graduation on blade.
Size: 20.4 x 12.2 x 1.3 cm | Nos | 190.0 | 190.0 | 4.0 | False | None | None | False | None | False | 760.0 | 0 |
| 3150183 | 108594 | None | code63 | Line tester Multi Purpose Digital Tester with LCD Display and Neon Bulb MDTN-82 | Nos | 100.0 | 100.0 | 16.0 | False | None | None | False | None | False | 1600.0 | 0 |
| 3150184 | 108594 | None | code64 | Ammeter (AC & DC) Electrodynamo meter type | Nos | 300.0 | 300.0 | 8.0 | False | None | None | False | None | False | 2400.0 | 0 |
| 3150185 | 108594 | None | code65 | Volt meter Product Type Moving Coil
Range 300V , Size 72 mm | Nos | 200.0 | 200.0 | 8.0 | False | None | None | False | None | False | 1600.0 | 0 |
| 3150186 | 108594 | None | code66 | Direct and for higher ranges through CT/1 A or 5 A Voltage (V): 110 V / 220 V/ 440 V and Through PT for Higher Voltage Size 96 x 96 mm, 144 x 144 mm Accuracy Watt meter: plus/minus1.5% of Full Scale Power Factor Meter: plus/minus 2 of Phase Angle | Nos | 2000.0 | 2000.0 | 4.0 | False | None | None | False | None | False | 8000.0 | 0 |
| 3150187 | 108594 | None | code67 | Energy meter analog (3-digital1) Electric KWH Meter Multi Tarif KWH Meter. Certification:
CE/ROHS Reference Basic Current: 10(50)A Output Voltage: 127/230V | Nos | 500.0 | 500.0 | 8.0 | False | None | None | False | None | False | 4000.0 | 0 |
| 3150188 | 108594 | None | code68 | Ohmmeter Megger type | Nos | 6300.0 | 6300.0 | 4.0 | False | None | None | False | None | False | 25200.0 | 0 |
| 3150189 | 108594 | None | code69 | Aluminium wire Digital DMM - Current, Voltage, Capacitance, Frequency & Resistance Measurement., Frequency Range: 99.99-20.00 MHz, DC Voltage Range: 400mV/4/40/400/1000V, AC Current Accuracy: plus/minus(2.0%rdg + 4dgt), Duty Cycle: 0.1-99.9%, SP Function: Diode test, Audible Continuity, Data Hold. | Nos | 960.0 | 960.0 | 16.0 | False | None | None | False | None | False | 15360.0 | 0 |
| 3150190 | 108594 | None | code70 | Frequency meter Displays System Frequency Up to 50 hz. | Nos | 460.0 | 460.0 | 2.0 | False | None | None | False | None | False | 920.0 | 0 |
| 3150191 | 108594 | None | code71 | Power factor meter Power India Meters Single Phase Digital Multi-function | Nos | 750.0 | 750.0 | 2.0 | False | None | None | False | None | False | 1500.0 | 0 |
| 3150192 | 108594 | None | code72 | Digital volt meter and ammeter Blue Red Dual LED Display Size: 48mm x 29mm x 21mm. Display color: Red & Blue LED (dual display). Display: 0.28" LED digital.
Operating voltage: DC 4.5-30V. Measure voltage: DC 0-100V. Minimum resolution (V): 0.1V. Operating Current: greater than 20mA. Measure current: 10A (direct measurement, built-in shunt). Operating temperature: -10 to 65C Operating Humidity: 10 to 80% (non-condensing). Mounting cutout: 45.5mm x 26.5mm. | Nos | 550.0 | 550.0 | 2.0 | False | None | None | False | None | False | 1100.0 | 0 |
| 3150193 | 108594 | None | code73 | Tachometer RPM gauge | Nos | 1590.0 | 1590.0 | 2.0 | False | None | None | False | None | False | 3180.0 | 0 |
| 3150194 | 108594 | None | code74 | Synchroscope Universal ppts
Standard - 1248-5
Type: Electronic Synchroscope Meter Frequency Range: 35-70 Hz
Input Voltage: 127/120V
Front dimension: 96x96 | Nos | 2375.0 | 2375.0 | 2.0 | False | None | None | False | None | False | 4750.0 | 0 |
| 3150195 | 108594 | None | code75 | Electrician's Scissors Metal blade - high carbon steel | Nos | 200.0 | 200.0 | 8.0 | False | None | None | False | None | False | 1600.0 | 0 |
| 3150196 | 108594 | None | code76 | Hand operated shearing machine Spring type
Material - Cast Iron
Height- 2.5 Feet
Weight: 5-7 K | Nos | 2000.0 | 2000.0 | 2.0 | False | None | None | False | None | False | 4000.0 | 0 |
| 3150197 | 108594 | None | code77 | Pipe cutter Professional pipe cutting tool Type: Slip Joint Pliers, Handle Material : High quty aluminum alloy | Nos | 1550.0 | 1550.0 | 2.0 | False | None | None | False | None | False | 3100.0 | 0 |
| 3150198 | 108594 | None | code78 | Hacksaw frame with blade Tubular with Die cast handle. Fitted with 12" Chrome Alloy Steel Blade | Nos | 270.0 | 270.0 | 4.0 | False | None | None | False | None | False | 1080.0 | 0 |
| 3150199 | 108594 | None | code79 | Electric Drill Machine with Drilling bit simple drill 10mm + 6hss bits+ 1 masonry bit, power: 300watts, rpm: 2300rpm, voltage-220, motor: copper, outer body: pvc and metal, domestic drilling machine | Nos | 960.0 | 960.0 | 2.0 | False | None | None | False | None | False | 1920.0 | 0 |
| 3150200 | 108594 | None | code80 | Grinder 6" Grinder For Sharpening & Grinding used for sharpening and grinding with clamping base which attaches to any table or workbench with grinding wheel | Nos | 750.0 | 750.0 | 2.0 | False | None | None | False | None | False | 1500.0 | 0 |
| 3150201 | 108594 | None | code81 | Chisel 12mm Chisel 12mm with Sturdy Wood Handle and chromium steel blade | Nos | 275.0 | 275.0 | 2.0 | False | None | None | False | None | False | 550.0 | 0 |
| 3150202 | 108594 | None | code82 | Chisel 36mm Chisel 36 mm with Sturdy Wood Handle and chromium steel blade | Nos | 325.0 | 325.0 | 2.0 | False | None | None | False | None | False | 650.0 | 0 |
| 3150203 | 108594 | None | code83 | Rasp file 8" Wood Rasp File Set with Rubber Grip + Plastic Handles - Includes Hand Cut Round, Half-round, and Flat Rasp File Kit | Nos | 300.0 | 300.0 | 2.0 | False | None | None | False | None | False | 600.0 | 0 |
| 3150204 | 108594 | None | code84 | Hand saw 14" handsaw with wooden handle | Nos | 300.0 | 300.0 | 4.0 | False | None | None | False | None | False | 1200.0 | 0 |
| 3150205 | 108594 | None | code85 | Tennon saw File sharpened teeth with plain hardened cutting edges. Impact resistant handle. | Nos | 800.0 | 800.0 | 4.0 | False | None | None | False | None | False | 3200.0 | 0 |
| 3150206 | 108594 | None | code86 | Punch with bit 8no& 10no Punch Holder with 8mm and 10mm bit | Nos | 1000.0 | 1000.0 | 2.0 | False | None | None | False | None | False | 2000.0 | 0 |
| 3150207 | 108594 | None | code87 | Spanner Set 8 spanners of the following sizes: 6 x 7 mm, 8 x 9 mm, 10 x 11 mm, 12 x 13 mm, 14 x 15 mm, 16 x 17 mm, 18 x 19 mm, 20 x 22 mm made of chromium steel coated with Nickel Chrome alloy | Nos | 558.0 | 558.0 | 2.0 | False | None | None | False | None | False | 1116.0 | 0 |
| 3150208 | 108594 | None | code88 | Screw driver Kit Screwdriver kit of 8 blades with tester, flat tip: 3. 25, 4. 5, 5 Mm, philips no - 0, 1, 2, pocker and extension rod. Blade material made from manganese steel | Nos | 290.0 | 290.0 | 4.0 | False | None | None | False | None | False | 1160.0 | 0 |
| 3150209 | 108594 | None | code89 | Mallet Hard non corrosive steel with wooden or Rubber grip on handle. | Nos | 210.0 | 210.0 | 4.0 | False | None | None | False | None | False | 840.0 | 0 |
| 3150210 | 108594 | None | code90 | Ball peen hammer Hard non corrosive steel with wooden or Rubber grip on handle. | Nos | 120.0 | 120.0 | 4.0 | False | None | None | False | None | False | 480.0 | 0 |
| 3150211 | 108594 | None | code91 | Claw hammer Hard non corrosive steel with wooden or Rubber grip on handle. | Nos | 200.0 | 200.0 | 4.0 | False | None | None | False | None | False | 800.0 | 0 |
| 3150212 | 108594 | None | code92 | Plier set of 4 4-piece pliers set includes 8-inch slip joint, 8-inch long nose, 8-inch lineman, and 7-inch diagonal/side cutting with insulated thick rubber covered handles. | Nos | 1000.0 | 1000.0 | 4.0 | False | None | None | False | None | False | 4000.0 | 0 |
| 3150213 | 108594 | None | code93 | Rheostat 0-10ohm 0 to 10 ohm | Nos | 4200.0 | 4200.0 | 2.0 | False | None | None | False | None | False | 8400.0 | 0 |
| 3150214 | 108594 | None | code94 | Rheostat 0-30ohm 0 to 30 ohm | Nos | 4850.0 | 4850.0 | 2.0 | False | None | None | False | None | False | 9700.0 | 0 |
| 3150215 | 108594 | None | code95 | Wire stripper Electrical insulation from electric wires. | Nos | 345.0 | 345.0 | 2.0 | False | None | None | False | None | False | 690.0 | 0 |
| 3150216 | 108594 | None | code96 | Poker screwdriver 95mm Poker Screwdriver
Made out of High Grade Steel and Transparent green cellulose acetate handle | Nos | 25.0 | 25.0 | 8.0 | False | None | None | False | None | False | 200.0 | 0 |
| 3150217 | 108594 | None | code97 | Grease gun Grease Gun with Aluminum Die cast head complete with Universal Nozzle with Rubber Seal, tool box size grease gun with bulk fill capacity of upto 120 gms
Die cast grease gun head
4" steel extension and 3 jaw coupler without ball check | Nos | 300.0 | 300.0 | 2.0 | False | None | None | False | None | False | 600.0 | 0 |
| 3150218 | 108594 | None | code98 | Oil cane Lever type 500 ml , high grade steel body with powder coated finish, steel pump , body. With 9" flexible PVC spout. Metal pump with 2 ball valves for large volume delivery per stroke | Nos | 100.0 | 100.0 | 2.0 | False | None | None | False | None | False | 200.0 | 0 |
| 3150219 | 108594 | None | code99 | Electrician knife Folding Knife for Cable Stripping and Cutting. 4.5" Insulated nylon handle
3 3/8" blade | Nos | 100.0 | 100.0 | 8.0 | False | None | None | False | None | False | 800.0 | 0 |
| 3150220 | 108594 | None | code100 | Adjustable wrench adjustable Wrench of 6 inches of high grade forging quality steel and heat treated in the range of 40 to 50 HRC | Nos | 217.0 | 217.0 | 4.0 | False | None | None | False | None | False | 868.0 | 0 |
| 3150221 | 108594 | None | code101 | Assorted wire Connectors Quantity: 80 pcs - Min 10 of each kind wof different sizes
Red Connectors: 0.4mm to 1mm² / 22-16AWG Wire
Blue Connector: 1.1mm to 2.6mm² / 16-14AWG Wire
Yellow Connector: 2.5mm to 6.5mm² / 12-10AWG Wire
1. Twist-On Wire Connectors
2. Winged Twist-On Wire Connectors
3.Trimp-On Wire Connectors
4.nderground Wire Connectors
5.Waterproof Wire Connectors
6 Push-In Wire Connectors | Nos | 780.0 | 780.0 | 2.0 | False | None | None | False | None | False | 1560.0 | 0 |
| 3150222 | 108594 | None | code102 | Wire Stripper, Cutter, Crimper and Pliers Multi crimp and stripper pliers
Product Dimensions
8.2 x 2.6 x 0.6 inches with insulated Rubber grips | Nos | 208.0 | 208.0 | 4.0 | False | None | None | False | None | False | 832.0 | 0 |
| 3150223 | 108594 | None | code103 | Firmer chisel High-Quality Chrome Vanadium Steel Hardened to RC 58 with wooden/ rubberised handle and grip | Nos | 300.0 | 300.0 | 4.0 | False | None | None | False | None | False | 1200.0 | 0 |
| 3150224 | 108594 | None | code104 | Files For filing the records measure 8 5/8 inches in height (for the front flap), 9 5/8 inches in height (for the back flap), and 11 3/4 inches in width | Nos | 650.0 | 650.0 | 2.0 | False | None | None | False | None | False | 1300.0 | 0 |
| 3150225 | 108594 | None | code105 | Capacitor Used in Ceiling fans
450V AC 2uF 50/60Hz Polypropylene Film Motor Start Run Capacitor CBB61 | Nos | 100.0 | 100.0 | 2.0 | False | None | None | False | None | False | 200.0 | 0 |
| 3150226 | 108594 | None | code106 | Dimmer stat Resistance coil/induction coil | Nos | 2500.0 | 2500.0 | 2.0 | False | None | None | False | None | False | 5000.0 | 0 |
| 3150227 | 108594 | None | code107 | Stopwatch with Battery Digital Stopwatch with Battery. 12 hour display format | Nos | 300.0 | 300.0 | 2.0 | False | None | None | False | None | False | 600.0 | 0 |
| 3150228 | 108594 | None | code108 | Solder Wire Solder Wire (tin/lead) - 60/40
18 SWG | Kg | 150.0 | 150.0 | 2.0 | False | None | None | False | None | False | 300.0 | 0 |
| 3150229 | 108594 | None | code109 | Copper Wire Copper Wire for electrical fitting | Kg | 400.0 | 400.0 | 2.0 | False | None | None | False | None | False | 800.0 | 0 |
| 3150230 | 108594 | None | code110 | Aluminium wire Aluminium wire for electrical fitting | Kg | 175.0 | 175.0 | 2.0 | False | None | None | False | None | False | 350.0 | 0 |
| 3150231 | 108594 | None | code111 | Enamel aluminum wire Aluminum - (units in Kg)
Polyesterimide overcoated with polyamide-imide enamelled Round Aluminium Wire, Class 200
IS 13730/
IEC 60317
Part 25 : 1993
6 swg to 37 swg | Kg | 230.0 | 230.0 | 2.0 | False | None | None | False | None | False | 460.0 | 0 |
| 3150232 | 108594 | None | code112 | Enamel copper wire Copper - (Units in Kg)
Polyesterimide overcoated with IS 13730/ 8 swg to 43 swg
polyamide-imide enamelled IEC 60317 4.06 mm to 0.091 mm
Round Copper Wire, Class 200 Part 13 : 1993 | Kg | 500.0 | 500.0 | 2.0 | False | None | None | False | None | False | 1000.0 | 0 |
| 3150233 | 108594 | None | code113 | Cello Tape 1 Inch 65mtrs Cello Tape | Nos | 50.0 | 50.0 | 8.0 | False | None | None | False | None | False | 400.0 | 0 |
| 3150234 | 108594 | None | code114 | PVC InsulationTape 0.125mmX18mm 10 Yards Self Adhesive PVC Electrical Insulation Tape-colored pack of 4
Sunlight Resistant, Pressure Sensitive Vinyl Electrical Tape | Nos | 150.0 | 150.0 | 8.0 | False | None | None | False | None | False | 1200.0 | 0 |
| 3150235 | 108594 | None | code115 | Flexible Pipe Units in Mtrs
Material :PVC
Thickness: 1 - 5mm
Feature :Self-extinguishing
Length :2-10M
Nominal pressure: 2 bar | Mtr | 40.0 | 40.0 | 20.0 | False | None | None | False | None | False | 800.0 | 0 |
| 3150236 | 108594 | None | code116 | Soldering iron Modular with rubber grip and holder - 1-Piece 30W Soldering Iron, 2 Soldering Tips and 1 Safety Stand Standard: IS 959 : 1994 ( Reaffirmed 2004 ) | Nos | 200.0 | 200.0 | 6.0 | False | None | None | False | None | False | 1200.0 | 0 |
| 3150237 | 108594 | None | code117 | Modular Switches 16a 240v 2 Way Bell Switch -21, 10Amps 240V, 1 way switc- 3 with suitable plates | Nos | 500.0 | 500.0 | 10.0 | False | None | None | False | None | False | 5000.0 | 0 |
| 3150238 | 108594 | None | code118 | Modulare sockets Combined Box 2 Hole WH Switch, 20 Amp, White | Nos | 130.0 | 130.0 | 4.0 | False | None | None | False | None | False | 520.0 | 0 |
| 3150239 | 108594 | None | code119 | Wiring boards 5v/3.4 A PCB Board | Nos | 400.0 | 400.0 | 10.0 | False | None | None | False | None | False | 4000.0 | 0 |
| 3150240 | 108594 | None | code120 | Lead acid battery Battery Type :Sealed Type
Voltage(volts) :100Ah 900A(EN)12V
Adhering to BIS standards | Nos | 4000.0 | 4000.0 | 2.0 | False | None | None | False | None | False | 8000.0 | 0 |
| 3150241 | 108594 | None | code121 | MCB’s Miniature Circuit Breaker)blue,black,green. activated automatically: Standards: IEC60898 | Nos | 200.0 | 200.0 | 2.0 | False | None | None | False | None | False | 400.0 | 0 |
| 3150242 | 108594 | None | code122 | Power supply voltage switch Manual Switch block ithat selects one of its two inputs to pass through to the output. | Nos | 300.0 | 300.0 | 2.0 | False | None | None | False | None | False | 600.0 | 0 |
| 3150243 | 108594 | None | code123 | Desoldering pump & wire Manual / Electirc Vacuum Desoldering Pump | Nos | 200.0 | 200.0 | 2.0 | False | None | None | False | None | False | 400.0 | 0 |
| 3150244 | 108594 | None | code124 | Water Gauge Dial Size: 3 inch
Accuracy : 2 %
Case Bezel : SS 304
Wetted Parts : SS 304 ,SS 316,Brass
Range : Vacuum to 2000 kg/cm2
Liquid filled : Glycerin Or Dry | Nos | 500.0 | 500.0 | 10.0 | False | None | None | False | None | False | 5000.0 | 0 |
| 3150245 | 108594 | None | code125 | Cables 10/14 copper wire 1mm x 2 core | Mtr | 60.0 | 60.0 | 50.0 | False | None | None | False | None | False | 3000.0 | 0 |
| 3150246 | 108594 | None | code126 | TDS Meter TDS Range 0 - 9990 ppm (mg/L)
Power source 2 x 1.5V button cell batteries (included)(LR44 or equivalent)
Battery life 1000 hours of usage
Dimensions 15.5 x 3.1 x 2.3cm
Weight with case 76.5g
Temp. Range 0 - 80 degrees Celsius
Resolution 0-999: 1 ppm; 1000-9990: 10 ppm (indicated by a 'x10' icon)
Temperature Resolution 0.1 degree Celsius (Celsius only)
Accuracy +/- 2%
EC-to-TDS Conversion Factor NaCl (avg. 0.5)
ATC Built-in sensor for Automatic Temperature Compensation of 1 to 50 degrees Celsius | Nos | 1300.0 | 1300.0 | 4.0 | False | None | None | False | None | False | 5200.0 | 0 |
| 3150247 | 108594 | None | code127 | Water Purifier Capacity : 0-5 L
Certification : NSF, ISO
Purifier Type : Electric
Purification Capacity(Per Hour) :
10-15 liters/Hour
Features : Auto Shut-Off, Smart Indicator
Technology- RO+UV+UF+TDS, primary material - plastic , minimum input water Tempareture -10 dgree C, weight- 9.4kg, | Nos | 6000.0 | 6000.0 | 2.0 | False | None | None | False | None | False | 12000.0 | 0 |
| 3150248 | 108594 | None | code128 | Micro wave oven grill, convention type Technical Specifications Microwave Frequency (MHZ)2450
Power Source (V-HZ)230-50
Microwave Power Consumption (Watts)1400
Grill Power Consumption (Watts)1000
Specifications Weight & Dimensions Net Weight (KG)Approx 14.5
Outer Dimension (H X W X D-mm)281 x 483 x 425
Turntable Diameter (mm)270
Aesthetics ColourBlack + Floral Design
CavityPowder Coated
DisplayLCD ( Cooking time/Power/Action indicators and time Displayed )
Features ClockYes
Safety Overheating ProtectionYes
Child Safety LockYes
Performance Microwave Output (Watts)900 | Nos | 9000.0 | 9000.0 | 2.0 | False | None | None | False | None | False | 18000.0 | 0 |
| 3150249 | 108594 | None | code129 | Mixer-grinder 3 hardened stainless steel blades for multiple functions
1.5 Litre liquidizing jar, 1 Litre wet/dry grinding jar, 0.4 Litre chutney jar
Warranty: 2 years on product
Power: 500 watts; Operating voltage: 230 volts
Includes: Mixer grinder, 3 Jars, 3 Blades, | Nos | 2500.0 | 2500.0 | 2.0 | False | None | None | False | None | False | 5000.0 | 0 |
| 3150250 | 108594 | None | code130 | Juicer Capacity : 100-500 ml
No. Of Jar : 6
Speed Setting : 1
Power : 500 Watts
Body Material : Plastic and Metal
No. Of Attachement : 4 | Nos | 500.0 | 500.0 | 4.0 | False | None | None | False | None | False | 2000.0 | 0 |
| 3150251 | 108594 | None | code131 | Clamp Meter Display : 3 -1/2 digits A With 1999 Counts, Operating Temperature & Humidity : 0 deg C To 50 deg C , greater than 80% RH, Storage Temperature : -20 deg C To 60 deg C , greater than 80% RH | Nos | 500.0 | 500.0 | 4.0 | False | None | None | False | None | False | 2000.0 | 0 |
| 3150252 | 108594 | None | code132 | Pipe wrench Nominal Size of Pipe wrench (in mm)- 450, Jaw thickness of Pipe Wrench (in mm)- 21, Maximum capacity of Pipe wrench (in mm) - 65, Approximate length of handle (in mm)- 260, Approximate length of movable jaw(in mm)- 200, Material of Frame- Wrought Steel,Material for Spring - Steel | Nos | 600.0 | 600.0 | 4.0 | False | None | None | False | None | False | 2400.0 | 0 |
| 3150253 | 108594 | None | code133 | Soldering Flux Temperature range 50 deg C to 450 deg C, Temperature accuracy plus/minus 10 deg C, Temperature stability plus/minus 5 deg C, Out put voltage -12 V, Power consumption - 150 W to 300 W | Nos | 25.0 | 25.0 | 16.0 | False | None | None | False | None | False | 400.0 | 0 |
| 3150254 | 108594 | None | code134 | Hand glove Material : Polyurethane coating, Anti-static nylon/carbon yarn | Nos | 90.0 | 90.0 | 8.0 | False | None | None | False | None | False | 720.0 | 0 |
| 3150255 | 108594 | None | code135 | Single needle lock stitch machine (SNLS) with needle guard Application : Light to Medium Fabric
Hook Mechanism : Standard
Max Speed : 5500 SPM Max Stitch Length : 5 mm Max Presser Foot Lift(mm) : 5.5/13 mm Motor Type : Clutch Motor Wattage : 250 watt | Nos | 20000.0 | 20000.0 | 22.0 | False | None | None | False | None | False | 440000.0 | 0 |
| 3150256 | 108594 | None | code136 | Specialized industrial sewing machines Body Material : Mild Steel
Voltage :220 V
Button Size : 10-28 mm
Button Holes Distance "2.5 to 6.5 mm | Nos | 30000.0 | 30000.0 | 10.0 | False | None | None | False | None | False | 300000.0 | 0 |
| 3150257 | 108594 | None | code137 | Sewing Machine Accessories and Attachments : 1 High quality bobbin case, 5 high quality aluminium bobbins, 1 pair of right & left single/zipper foot, 1 gathering foot, 1 box [10nos] sewing machine needle of size 14 and 1box [10nos] sewing machine needle of size 16. | Kit | 600.0 | 600.0 | 22.0 | False | None | None | False | None | False | 13200.0 | 0 |
| 3150258 | 108594 | None | code138 | Projector : Image System: TFT LCD, Brightness: 1200 lumens, Maximum Resolution: 1080p, Lamp: LED (20K hours)
Projection Distance: 1.07M-3.8M, Projection Size: 34-130 inches, Color: 16.7M
Power Supply: 100-240V 50/60HZ, Power Consumption: 55W (Max), Input: USB/SD/HDMI/AV/VGA/UNi-Link
Output: 3.5mm earphone, Speaker: 8 Ohms1W, Short-focus Design: 2M-lessthan 70-inch,3M-lessthan100-inch
Video: 3GP, AVI,MKV, FLV, MOV, MP4, MPG, VOB, RMVB, MPG
Audio: MP3, WMA, ASF, OGG, AAC, WAV. Picture: JPEG, BMP, PNG. Text: TXT | Nos | 10000.0 | 10000.0 | 2.0 | False | None | None | False | None | False | 20000.0 | 0 |
| 3150259 | 108594 | None | code139 | Printer : LaserJet multifunction printer - Printer, Copier, Scanner
Interpolated scanning resolution-19200 x 19200 dpi
Optical scanning resolution-600 x 1200 dpi
Compatible with operating system: Windows: XP/Vista/7/8, MAC, Linux
With a USB port | Nos | 9000.0 | 9000.0 | 2.0 | False | None | None | False | None | False | 18000.0 | 0 |
| 3150260 | 108594 | None | code140 | Shears (8-10” Iron Blade for Cutting Fabric) : Tailoring scissors of minimum 9.5inch made up of stainless steel for cutting a fabric. | Nos | 500.0 | 500.0 | 30.0 | False | None | None | False | None | False | 15000.0 | 0 |
| 3150261 | 108594 | None | code141 | Paper, Scissors : Plastic handled stainless steel scissor for cutting paper | Nos | 150.0 | 150.0 | 30.0 | False | None | None | False | None | False | 4500.0 | 0 |
| 3150262 | 108594 | None | code142 | Seam Ripper : Handy seam ripper with plastic cover, used for opening stitches for sewing and craft works, Length : Large Size(LxW):30 x 5 mm, Small Size(LxW): 60 x 5 mm, Handle Length (in mm) : 35, 98 | Nos | 100.0 | 100.0 | 30.0 | False | None | None | False | None | False | 3000.0 | 0 |
| 3150263 | 108594 | None | code143 | Tracing wheel : Tracing wheel with minimum length:- 15.2cm, and wheel gear diameter:- 2.2cm. | Each | 50.0 | 50.0 | 30.0 | False | None | None | False | None | False | 1500.0 | 0 |
| 3150264 | 108594 | None | code144 | Tailor's Chalk : Extra smooth tailoring, sewing markers with fashion designing triangle scales, set of 15 dust free tailoring chalks | Each | 150.0 | 150.0 | 22.0 | False | None | None | False | None | False | 3300.0 | 0 |
| 3150265 | 108594 | None | code145 | Craft Cutter : Metal craft cutters/nippers with plastic handle for multi use cutting threads,paper,crafts | Each | 75.0 | 75.0 | 30.0 | False | None | None | False | None | False | 2250.0 | 0 |
| 3150266 | 108594 | None | code146 | Safety Pins : Steel safety pins of medium (3.5cm) and large sizes (5.5cm) | Box | 50.0 | 50.0 | 22.0 | False | None | None | False | None | False | 1100.0 | 0 |
| 3150267 | 108594 | None | code147 | Dress Maker's Pin : All pins with pointed needle with length 2.5 cm X diameter 0.5 mm | Box | 150.0 | 150.0 | 22.0 | False | None | None | False | None | False | 3300.0 | 0 |
| 3150268 | 108594 | None | code148 | Scale : Metallic scale of sizes 6” & 12” | Nos | 200.0 | 200.0 | 22.0 | False | None | None | False | None | False | 4400.0 | 0 |
| 3150269 | 108594 | None | code149 | Measuring Tape : PVC measuring tape of 7.5 m and 0.5” width | Nos | 200.0 | 200.0 | 22.0 | False | None | None | False | None | False | 4400.0 | 0 |
| 3150270 | 108594 | None | code150 | Bobbin and bobbin case for industrial machine : Steel bobbin and bobbin case, Material: Stainless Steel, Dimension(lxbkxh) in cm: 4x3.5x1.3 | Nos | 100.0 | 100.0 | 60.0 | False | None | None | False | None | False | 6000.0 | 0 |
| 3150271 | 108594 | None | code151 | Hand needles : Assorted hand sewing needles for embroidery and mending, Standard size, Material : Stainless Steel, Finish : Polished, Rust Proof, Dimension(lxb) in cm: 5x0.26 | Nos | 200.0 | 200.0 | 60.0 | False | None | None | False | None | False | 12000.0 | 0 |
| 3150272 | 108594 | None | code152 | Machine needles : Sewing machine needle with one pack containing minimum 20 needle, Standard size, Size: 9, 11, 14, 16, 18; | Nos | 150.0 | 150.0 | 60.0 | False | None | None | False | None | False | 9000.0 | 0 |
| 3150273 | 108594 | None | code153 | Needle Threader : Steel needle threader, Size: approx. 6.7 x 2.2 x 0.6 cm | Nos | 20.0 | 20.0 | 60.0 | False | None | None | False | None | False | 1200.0 | 0 |
| 3150274 | 108594 | None | code154 | Notcher (1/4 X 1/6” Opening) : Metal notcher with spring action handle like paper punch to mark notches on pattern paper or tissue pieces. Creates deep square cuts in the edge of patterns. Minimum dimensions : 19 x 8.5 cm | Nos | 300.0 | 300.0 | 22.0 | False | None | None | False | None | False | 6600.0 | 0 |
| 3150275 | 108594 | None | code155 | Dress Form (Various Sizes of Male / Female / Kids) : Sample cotton salwar, shirt and frock models
2xDress Form Women's-Large and Medium
2xDress Form Men's-Large and Medium
2xDress Form Kids (2-3 Years)
2xDress Form Girls (12-14 Years)
2xDress Form Boys (12-13 Years) | Kit | 10000.0 | 10000.0 | 2.0 | False | None | None | False | None | False | 20000.0 | 0 |
| 3150276 | 108594 | None | code156 | Threads : 180 mts polyester thread used in hand & machine work (set of 100) | Set | 600.0 | 600.0 | 6.0 | False | None | None | False | None | False | 3600.0 | 0 |
| 3150277 | 108594 | None | code157 | Personal protective equipment (Nose Mask, Goggles, etc.): Respiratory anti-pollution non-woven mask.
Goggles hard coated, scratch resistance, UV protected safety glasses | Nos | 150.0 | 150.0 | 22.0 | False | None | None | False | None | False | 3300.0 | 0 |
| 3150278 | 108594 | None | code158 | Cutting Table : Pre-laminated folding type board of measurement- 8'(L)x 6' (W) x 3'(H) | Nos | 15000.0 | 15000.0 | 2.0 | False | None | None | False | None | False | 30000.0 | 0 |
| 3150279 | 108594 | None | code159 | Students Sewing stools : Sewing machine table made up of stainless steel. | Nos | 1000.0 | 1000.0 | 22.0 | False | None | None | False | None | False | 22000.0 | 0 |
| 3150280 | 108594 | None | code160 | First aid box : Large household multi-layer first aid kit multifunctional medicine box comprising of first-aid bandage, small scissors, tweezers or a cotton swab, ointment, and other basic over the counter drugs. | Nos | 1000.0 | 1000.0 | 2.0 | False | None | None | False | None | False | 2000.0 | 0 |
| 3150281 | 108594 | None | code161 | Dustbin : Stainless steel plain pedal dustbin-1
Big plastic garbage bin- 1 | Nos | 500.0 | 500.0 | 4.0 | False | None | None | False | None | False | 2000.0 | 0 |
| 3150282 | 108594 | None | code162 | Pouches for Storing Items : Clear transparent zip lock bags with write on panels - Large, medium and small size- 200x300mm, 250x350mm, 300x400mm (For storing threads, garments, needles etc) | Nos | 300.0 | 300.0 | 22.0 | False | None | None | False | None | False | 6600.0 | 0 |
| 3150283 | 108594 | None | code163 | White Board and accessories : Dry erasable white board (4'x6'), along with white board marker, and magnetic white board eraser | Nos | 5000.0 | 5000.0 | 2.0 | False | None | None | False | None | False | 10000.0 | 0 |
| 3150284 | 108594 | None | code164 | Machine Oil : 200ml bottle of sewing machine lubricant oil. | Nos | 70.0 | 70.0 | 30.0 | False | None | None | False | None | False | 2100.0 | 0 |
| 3150285 | 108594 | None | code165 | Stationary : Pencil (HB)
Files and Folders
Carbon Paper ( Various Colors)
Labels and Stickers | Nos | 50.0 | 50.0 | 60.0 | False | None | None | False | None | False | 3000.0 | 0 |
| 3150286 | 108594 | None | code166 | Documents/Charts : Tech Pack/ Specification Sheet
Size Chart
Trim Card
Seam samples of different fabric
Buyer’s comment Sheet
Operation Bulletin
Company Quality Standards Handbook/ Guidelines
Fabric Worksheet
Style Confirmation sheet
Fabric consumption Chart
Fabric Requirement sheet (FRS)
Trims Requirement sheet | Nos | 100.0 | 100.0 | 30.0 | False | None | None | False | None | False | 3000.0 | 0 |