| 1716550567000 | 1 | None | None | Roads | Construction of cc road and drain from Kudligi Ujjini main road to B.D.gudda village VNR2341241675 | 7432586.01 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3161591 | 108843 | None | code01 | Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. PWD DSR.2023-24/V-1 , Pg-5 Item No.1.4.1 Rs.242/cum | Cum | 254.1 | 254.1 | 291.6 | False | None | None | False | None | False | 74095.56 | 0 | | 3161592 | 108843 | None | code02 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as pertechnical specifications. (The cost of steel reinforcement & formwork Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates | Cum | 6288.45 | 6288.45 | 35.1 | False | None | None | False | None | False | 220724.595 | 0 | | 3161593 | 108843 | None | code03 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesPWD DSR.2023-24/ Pg-16 Item No.2.4.2 Rs.6323.00/cum | Cum | 8852.2 | 8852.2 | 124.1 | False | None | None | False | None | False | 1098558.02 | 0 | | 3161594 | 108843 | None | code04 | Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately PWD DSR.2023-24/V-1, Pg-84 I No. 2.11A Rs.89457/MT | Kg | 93.93 | 93.93 | 7946.53 | False | None | None | False | None | False | 746417.5629 | 0 | | 3161595 | 108843 | None | code05 | Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material by Mechanical Means using Hydraulic excavator with in all lifts and lead (PWD CSR 2023-24 VOL-3 S.No. 3.5 P.No.17 ) Rs:6.00/sqm | Sqm | 6.3 | 6.3 | 1500.0 | False | None | None | False | None | False | 9450.0 | 0 | | 3161596 | 108843 | None | code06 | Earthwork in excavation for foundation of structures upto 3 m depth as per drawing and technical specification Clause 1104 including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material, Ordinary soil upto 3 m depth (PWD CSR 2023-24 VOL-1 S.No. 1.4.1 P.No.5 ) Rs:242.00/cum | Cum | 254.1 | 254.1 | 255.0 | False | None | None | False | None | False | 64795.5 | 0 | | 3161597 | 108843 | None | code07 | Compacting original ground supporting embankment Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction PWD SR 2023-24 V-III P 17 I.No.3.7 Rs.105.00/cum | Sqm | 110.25 | 110.25 | 480.0 | False | None | None | False | None | False | 52920.0 | 0 | | 3161598 | 108843 | None | code08 | Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work..PWD SR 2023-24 V-I P 7 I.No.1.8 Rs.474.00/cum | Cum | 497.7 | 497.7 | 255.0 | False | None | None | False | None | False | 126913.5 | 0 | | 3161599 | 108843 | None | code09 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired densityPWD CSR 2023-24 VOL-3, SL.No.4.17 (A) P.No. 26 Rs.2559.00/cum) | Sqm | 2686.95 | 2686.95 | 240.0 | False | None | None | False | None | False | 644868.0 | 0 | | 3161600 | 108843 | None | code10 | Construction of un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per claue 1501.2.2 design mix M20 (grade ), coarse and fine aggregates confirming to IS 383, maximum size of coarse aggregate not exceedng 25mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork ( steel channel, laying and fixing of 125 micron thickness polythene film, wedges, steel plates including levelling the formwork as per draqwings ), spreading the concrete with shoes, rakes, compacted using needle, screeed and plate vibrators and finished in continuous operation including provision of contraction and expansion, consstruction joints, primer, sealant, curing of concrete slabs for 14-days , and water finishing to line and grade as per drawing and technical specifications clause 1501.PWD CSR 2023-24 VOL-3, SL.No.16.27 P.No. 148) Rs.6374.00/cum | Cum | 6692.7 | 6692.7 | 480.0 | False | None | None | False | None | False | 3212496.0 | 0 | | 3161601 | 108843 | None | code11 | Providing and fixing name board | No | 6000.0 | 6000.0 | 2.0 | False | None | None | False | None | False | 12000.0 | 0 | | 3161602 | 108843 | None | code12 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/m 2 area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35:2015.The finished surface to be level, uniform and free from streaks and holes. (PWD2023-24, SNo - 8.15 P.No.67 ) | Sqm | 556.5 | 556.5 | 100.0 | False | None | None | False | None | False | 55650.0 | 0 | | 3161603 | 108843 | None | code13 | Fabricating, supplying and erection of …Mtrs long hot dip Galvanized Octagonal pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, including suitable boards, bakelite sheet and MCBs as per IS specifications suitable to withstand the wind speed of 47m/sec for …….Mtrs pole in single section and single joint welded as per IS 9595/IS 10178AWS having dimensions bottom …..mm, top….mm with 3mm thick, suitable base plate and 4Nos of ..... long J bolts along with tem plate and the pole shall be galvanized in single dipping with not less than 65micron as per ASTM-A123 and 153etc., ( Excluding foundation] as oer drawing appended. 9Mtr - Top 70mm and bottom 155mm dia. | No | 19500.0 | 19500.0 | 16.0 | False | None | None | False | None | False | 312000.0 | 0 | | 3161604 | 108843 | None | code14 | Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. Double Arm Bracket with 2000mm Standard 40/50MM dia PWD Ele SR 2023-24 P.NO.13 Item No. 4.6.1 Rs.1700.00/Nos | Each | 1700.0 | 1700.0 | 16.0 | False | None | None | False | None | False | 27200.0 | 0 | | 3161605 | 108843 | None | code15 | Supply of LED Streetlight luminaire with pressure die cast aluminum housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare Diffuser with Injection moulded polycarbonate materail,delivering superior light output. Rated life Burning Hrs 50000 hr Lumen Maintenance of 70%. maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminareIK08. Power Factor 0.9 with mains Current should not be greater than 0.1A to 0.7A & Surge Protection- Min 4KV along with Over voltage/Overload, short circuit/ miswiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Over load & Short circuit protection ensures reliable operation in spite of problem in output side. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with 120 W System Power consumption. LED Efficiency130lm/w at 1W & Fixture Efficiency 80lm/w with nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 90012008 Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED source manufacture. ake LED source. | Each | 10060.0 | 10060.0 | 16.0 | False | None | None | False | None | False | 160960.0 | 0 | | 3161606 | 108843 | None | code16 | Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975 3.5Core*25Sqmm PWD Ele SR 2023-24, P.NO.13 Item No.32.07 Rs.139549.00/km | Km | 139549.0 | 139549.0 | 0.544 | False | None | None | False | None | False | 75914.656 | 0 | | 3161607 | 108843 | None | code17 | Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation and sheathed suitable for working voltage upto 1100Volts as per IS-694:1990 4C*2.5 Sqmm PWD Ele SR 2023-24, P.NO.6 Item No.2.5.9 Rs.148.00/M | Mtr | 148.0 | 148.0 | 192.0 | False | None | None | False | None | False | 28416.0 | 0 | | 3161608 | 108843 | None | code18 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' curve , indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required Confirming to IEC 60898 PWD Ele SR 2023-24, P.NO.17 Item No.5.18.1 Rs.415.00/Nos | Each | 415.0 | 415.0 | 16.0 | False | None | None | False | None | False | 6640.0 | 0 | | 3161609 | 108843 | None | code19 | Supplying heavy gauge PVC conduit pipe 40mmdia2.5mm.mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall stone structure or rawl plugs in case of brick walls and cement plastering damaged portion using heavy gauge saddles at an interval of 700mm using NF screws 40 mm dia 2.5mm thick PWD Ele SR 2023-24,P.NO.2 Item No.1.1.4 Rs.149.00/Mtr | Mtr | 149.0 | 149.0 | 544.0 | False | None | None | False | None | False | 81056.0 | 0 | | 3161610 | 108843 | None | code20 | Stringing of 1.1 kV grade Aerial Bunched 3 Core cable of XLPE insulation of size (3x95) (Phase Conductor) + (1x70) (Insulated Messenger Neutral) + (1x16)(Street Light Control)PWD Ele SR 2023-24 P.NO.53 Item No.24.03 Rs33109.00/km | Mtr | 33109.0 | 33109.0 | 0.544 | False | None | None | False | None | False | 18011.296 | 0 | | 3161611 | 108843 | None | code21 | Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water proof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase / Three Phase Energy Meter in suitable base plate and having a provision for Fuse / MCB cutout with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility. 600x600x170mm PWD Ele SR 2023-24 P.NO.21 Item No.5.44.4 Rs.14520.00/each | Km | 14520.0 | 14520.0 | 2.0 | False | None | None | False | None | False | 29040.0 | 0 | | 3161612 | 108843 | None | code22 | Supplying and fixing angle iron frame work fabricated out of M.S angle iron.. And M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 40x40x6mm PWD Ele SR2023-24 P.NO.00 Item No.5.41.1 Rs.305.00/Mtr | Each | 305.0 | 305.0 | 20.0 | False | None | None | False | None | False | 6100.0 | 0 | | 3161613 | 108843 | None | code23 | Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit should be filled with equal proprotion of salt and charcoal 150mm alround the pipe to complete depth. The connection from the pipe to the conduit etc, is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and checknuts etc, the pipe shall have 16 through holes of 12 mm dia. PWD Ele SR 2023-24 P.NO.54 Item No.12.56 Rs.3510.00/Nos | Mtr | 3510.0 | 3510.0 | 4.0 | False | None | None | False | None | False | 14040.0 | 0 | | 3161614 | 108843 | None | code24 | Supplying and fixing 4 pole power contactor with NO/ NC contacts on existing wood/ pannel board using necessary bolts, nuts, washers and wiring etc, complete with AC-3 Rating as per IS-13947, 40 amps PWD Ele SR 2023-24 P.NO.26 Item No.5.14.3 Rs.6119.00/each | Each | 6119.0 | 6119.0 | 2.0 | False | None | None | False | None | False | 12238.0 | 0 | | 3161615 | 108843 | None | code25 | Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers PWD Ele SR 2023-24 P.NO.32 Item No.5.48 Rs.4843.00/each | Each | 4843.0 | 4843.0 | 2.0 | False | None | None | False | None | False | 9686.0 | 0 | | 3161616 | 108843 | None | code26 | Supplying and fixing of porcelain fuse channel with cut out on existing wooden/ pannel using necessary nuts, bolts and washers etc complete.PWD Ele SR 2023-24 P.NO.14 Item No.5.7.3 Rs.401.00/each | Each | 401.0 | 401.0 | 4.0 | False | None | None | False | None | False | 1604.0 | 0 | | 3161617 | 108843 | None | code27 | Supplying and fixing Trivector Meter suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and completely wired. PWD Ele SR 2023-24 P.NO.19 Item No.5.31 Rs.4390.00/each | Each | 4390.0 | 4390.0 | 1.0 | False | None | None | False | None | False | 4390.0 | 0 | | 3161618 | 108843 | None | code28 | Gescom deposit Charges including Bond ,registration charges. | Each | 25000.0 | 25000.0 | 1.0 | False | None | None | False | None | False | 25000.0 | 0 | | 3161619 | 108843 | None | code29 | Earthwork in excavation for foundation of structures upto 3 m depth as per drawing and technical specification Clause 1104 including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material, Ordinary soil upto 3 m depth (PWD CSR 2023-24 VOL-1 S.No. 1.4.1 P.No.5 ) Rs:242.00/cum | Cum | 254.1 | 254.1 | 19.2 | False | None | None | False | None | False | 4878.72 | 0 | | 3161620 | 108843 | None | code30 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as pertechnical specifications. (The cost of steel reinforcement & formwork Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates PWD DSR.2023-24/ Pg-15 Item No.2.1.3 Rs.5989.00/cum | Cum | 6288.45 | 6288.45 | 1.6 | False | None | None | False | None | False | 10061.52 | 0 | | 3161621 | 108843 | None | code31 | Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesPWD DSR.2023-24/ Pg-16 Item No.2.4.2 Rs.6323.00/cum | Cum | 6639.15 | 6639.15 | 25.27 | False | None | None | False | None | False | 167771.3205 | 0 | | 3161622 | 108843 | None | code32 | Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately PWD DSR.2023-24/V-1, Pg-84 I No. 2.11A Rs.89457/MT | MT | 93929.85 | 93929.85 | 1.2636 | False | None | None | False | None | False | 118689.75846 | 0 |
|