| tenderSubEstimateList | | createdTs | version | createdDate | modifiedDate | workCategoryName | subEstimateName | estimateTotal | itemList |
|---|
| 1717057033000 | 0 | None | None | Buildings | CONSTRUCTION OF SINGLE CLASS ROOM FOR KANNADA HIGHER PRIMARY SCHOOL LAXMIGUDI (UGAR K.H) IN KAGAWAD CONSTITUENCY ATHANI TALUKA OF BELAGAVI DISTRICT UNDER 4059-80-051-0-29-386 DEPARTMENT BUILDINGS. | 1374052.07 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3204623 | 110147 | None | Vol.1, P.No.8,I.No.1.12 | Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter includingdressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage ofmachinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth ( Vol.1, P.No.8,I.No.1.12) ---- included all material and labour charges | Cum | 99.75 | 99.75 | 18.27 | False | None | None | False | None | False | 1822.4325 | 0 | | 3204624 | 110147 | None | Vol.1, P.No.8,I.No.1.14.1 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications,including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m ( Vol.1, P.No.8,I.No.1.14.1) ---- included all material and labour charges | Cum | 107.1 | 107.1 | 44.49 | False | None | None | False | None | False | 4764.879 | 0 | | 3204625 | 110147 | None | Vol.1, P.No.15,I.No.2.1.3 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness,well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Formwork included and (The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates ( Vol.1, P.No.15,I.No.2.1.3) ---- included all material and labour charges | Cum | 6288.45 | 6288.45 | 15.26 | False | None | None | False | None | False | 95961.747 | 0 | | 3204626 | 110147 | None | Vol.2, P.No.5,I.No.4.1 | Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. ( Vol.2, P.No.5,I.No.4.1) ---- included all material and labour charges | Sqm | 123.9 | 123.9 | 58.93 | False | None | None | False | None | False | 7301.427 | 0 | | 3204627 | 110147 | None | Vol.2, P.No.9,I.No.5.3 | Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) ( Vol.2, P.No.9,I.No.5.3) ---- included all material and labour charges | Cum | 6515.25 | 6515.25 | 11.46 | False | None | None | False | None | False | 74664.765 | 0 | | 3204628 | 110147 | None | Volume 1 Page No 15-Item No 2.2.3 | Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (The cost of steel reinforcement & formwork to be paid separately) (Volume 1 Page No 15-Item No 2.2.3) ---- included all material and labour charges | Cum | 6652.8 | 6652.8 | 7.38 | False | None | None | False | None | False | 49097.664 | 0 | | 3204629 | 110147 | None | Vol.1, P.No.111, S.No.1a | Formwark for Footings Isolated @ 8% (Vol.1, P.No.111, S.No.1a) ---- included all material and labour charges | Cum | 532.22 | 532.22 | 7.38 | False | None | None | False | None | False | 3927.7836 | 0 | | 3204630 | 110147 | None | Vol.1, P.No.16, I.No.2.4.3 | Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ( Vol.1, P.No.16, I.No.2.4.3) ---- included all material and labour charges | Cum | 6652.8 | 6652.8 | 4.26 | False | None | None | False | None | False | 28340.928 | 0 | | 3204631 | 110147 | None | Vol.1, P.No.111, S.No.9 | Formwark for Columns @ 70% (Vol.1, P.No.111, S.No.9) ---- included all material and labour charges | Cum | 4656.96 | 4656.96 | 1.44 | False | None | None | False | None | False | 6706.0224 | 0 | | 3204632 | 110147 | None | Vol.1, P.No.111, S.No.2 | Formwark for Plinth beams of Buildings @ 50% (Vol.1, P.No.111, S.No.2) ---- included all material and labour charges | Cum | 3326.4 | 3326.4 | 2.82 | False | None | None | False | None | False | 9380.448 | 0 | | 3204633 | 110147 | None | Vol.1,P.No.7, I.No.1.9 | Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ( Vol.1,P.No.7, I.No.1.9) ---- included all material and labour charges | Cum | 279.3 | 279.3 | 24.55 | False | None | None | False | None | False | 6856.815 | 0 | | 3204634 | 110147 | None | Vol.1, P.No.16,I.No.2.5.2 | Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ( Vol.1, P.No.16,I.No.2.5.2) ---- included all material and labour charges | Cum | 7185.15 | 7185.15 | 17.41 | False | None | None | False | None | False | 125093.4615 | 0 | | 3204635 | 110147 | None | Vol.1, P.No.111, S.No.9 | Formwark for Columns @ 70% (Vol.1, P.No.111, S.No.9) ---- included all material and labour charges | Cum | 5029.61 | 5029.61 | 3.73 | False | None | None | False | None | False | 18760.4453 | 0 | | 3204636 | 110147 | None | Vol.1, P.No.112, S.No.14 | Formwark for Beams & Lintels of Building @ 60% (Vol.1, P.No.112, S.No.14) ---- included all material and labour charges | Cum | 4311.09 | 4311.09 | 3.6 | False | None | None | False | None | False | 15519.924 | 0 | | 3204637 | 110147 | None | Vol.1, P.No.112, S.No.15 | Formwark for Roof Slab of Building @ 50% (Vol.1, P.No.112, S.No.15) ---- included all material and labour charges | Cum | 3592.58 | 3592.58 | 8.84 | False | None | None | False | None | False | 31758.4072 | 0 | | 3204638 | 110147 | None | Vol.1, P.No.112, S.No.1 | Formwark for Chejjas, Canopy & Other Architectural projections of minor sections @ 45% (Vol.1, P.No.112, S.No.1 ---- included all material and labour charges | Cum | 3233.32 | 3233.32 | 1.24 | False | None | None | False | None | False | 4009.3168 | 0 | | 3204639 | 110147 | None | Vol.1, P.No.16, I.No.2.4.1 | Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates ( Vol.1, P.No.16, I.No.2.4.1) ---- included all material and labour charges | Cum | 6724.2 | 6724.2 | 1.21 | False | None | None | False | None | False | 8136.282 | 0 | | 3204640 | 110147 | None | Vol.1, P.No.18,I.No.2.11a | Providing Thermo-Mechanically Treated bars of grade Fe-550 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) (Vol.1, P.No.18,I.No.2.11a) ---- included all material and labour charges | t | 93929.85 | 93929.85 | 2.57 | False | None | None | False | None | False | 241399.7145 | 0 | | 3204641 | 110147 | None | Vol.2 P.No.14, I. No. 6.8 | Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of
engineer incharge of work.(Vol.2 P.No.14, I. No. 6.8) ---- included all material and labour charges | Cum | 8367.45 | 8367.45 | 19.3 | False | None | None | False | None | False | 161491.785 | 0 | | 3204642 | 110147 | None | Volume 2 Page No 99 Item No 12.11 | Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications.(Volume 2 Page No 99 Item No 12.11) ---- included all material and labour charges | Cum | 144977.7 | 144977.7 | 0.122 | False | None | None | False | None | False | 17687.2794 | 0 | | 3204643 | 110147 | None | Vol. 2, P. No.105, I.No.12.57.8 | Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification.-do- 40 mm thick one side teak and one side commercial.(Vol. 2, P. No.105, I.No.12.57.8) ---- included all material and labour charges | Sqm | 4515.0 | 4515.0 | 5.04 | False | None | None | False | None | False | 22755.6 | 0 | | 3204644 | 110147 | None | Vol. 2, P.No. 63, I. No.9.24 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent (Vol. 2, P.No. 63, I. No.9.24) ---- included all material and labour charges | Sqm | 2994.6 | 2994.6 | 5.76 | False | None | None | False | None | False | 17248.896 | 0 | | 3204645 | 110147 | None | Vol. 2, P.No.108, I.No.12.84 | Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6 PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets -grey color having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 44mm width x 40mmheight with reinforcement of 1mm thickness and Sash with overall size of 27mm X 53mm with UPVC honeycomb structure inside in lieu of GI reinforcement. Coextruded Glazing bead for fixing of glass shall be of size 9.5mm x 21.5mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with Crescent Locks. Wall thickness of frame & sash shall be of 2 mm.Maximum possible size 1219mm x 1219mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made (Vol. 2, P.No.108, I.No.12.84) ---- included all material and labour charges | Sqm | 5274.15 | 5274.15 | 4.32 | False | None | None | False | None | False | 22784.328 | 0 | | 3204646 | 110147 | None | Vol. 2 Material component S.No.394, P.No. A-24 | Galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mm (Vol. 2 Material component S.No.394, P.No. A-24) ---- included all material and labour charges | Sqm | 280.0 | 280.0 | 6.48 | False | None | None | False | None | False | 1814.4 | 0 | | 3204647 | 110147 | None | Vol.2, P.No.86, I.No.11.34B | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc (Vol.2, P.No.86, I.No.11.34B) ---- included all material and labour charges | Kgs | 192.15 | 192.15 | 116.64 | False | None | None | False | None | False | 22412.376 | 0 | | 3204648 | 110147 | None | Vol.2, P.No.61, I.No.9.12.2 | Providing and laying Vitrifiedfloor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm (Vol.2, P.No.61, I.No.9.12.2) ---- included all material and labour charges | Sqm | 1202.25 | 1202.25 | 33.98 | False | None | None | False | None | False | 40852.455 | 0 | | 3204649 | 110147 | None | Vol.2, P.No.41, I.No.8.1.1 | Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding,including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge (Vol.2, P.No.41, I.No.8.1.1) ---- included all material and labour charges | Sqm | 267.75 | 267.75 | 114.3 | False | None | None | False | None | False | 30603.825 | 0 | | 3204650 | 110147 | None | Vol.2, P.No.50, I.No.8.51 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. (Vol.2, P.No.50, I.No.8.51) ---- included all material and labour charges | Sqm | 105.0 | 105.0 | 117.69 | False | None | None | False | None | False | 12357.45 | 0 | | 3204651 | 110147 | None | Vol.2, P.No.42, I.No.8.8 | Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(Vol.2, P.No.42, I.No.8.8 ) ---- included all material and labour charges | Sqm | 389.55 | 389.55 | 162.38 | False | None | None | False | None | False | 63255.129 | 0 | | 3204652 | 110147 | None | Vol.2, P.No.64, I.No.9.36 | Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab , including cost of materials, labour, curing, polishing complete as per specifications. (Vol.2, P.No.64, I.No.9.36) ---- included all material and labour charges | Sqm | 1732.5 | 1732.5 | 3.11 | False | None | None | False | None | False | 5388.075 | 0 | | 3204653 | 110147 | None | Vol.2, P.No.47, I.No.8.33.3 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge (Vol.2, P.No.47, I.No.8.33.3) ---- included all material and labour charges | Sqm | 145.95 | 145.95 | 6.48 | False | None | None | False | None | False | 945.756 | 0 | | 3204654 | 110147 | None | Vol.2, P.No.46, I.No.8.33.2 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge (Vol.2, P.No.46, I.No.8.33.2) ---- included all material and labour charges | Sqm | 144.9 | 144.9 | 16.13 | False | None | None | False | None | False | 2337.237 | 0 | | 3204655 | 110147 | None | Vol.2, P.No.46, I.No.8.30 | Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (Vol.2, P.No.46, I.No.8.30) ---- included all material and labour charges | Sqm | 182.7 | 182.7 | 204.5 | False | None | None | False | None | False | 37362.15 | 0 | | 3204656 | 110147 | None | Vol.2, P.No.46, I.No.8.33.1 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Special primer applied @ 0.75 ltr /10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (Vol.2, P.No.46, I.No.8.33.1) ---- included all material and labour charges | Sqm | 165.9 | 165.9 | 117.69 | False | None | None | False | None | False | 19524.771 | 0 | | 3204657 | 110147 | None | Vol.2,P. No.105, I.No.12.51 | Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.(Vol.2,P. No.105, I.No.12.51) ---- included all material and labour charges | Nos | 1066.8 | 1066.8 | 2.0 | False | None | None | False | None | False | 2133.6 | 0 | | 3204658 | 110147 | None | Vol.5,P.No.125,I.No.13.48 | Providing and fixing on the wall face unplastisized rigid PVC rain water pipes confirmimg to IS:13592 Type A including jointing with seal ring confirmimg to IS:5382, leaving 10mm gap for thermal expansion, single socketed pipes 100mm diameter. ( Vol.5,P.No.125,I.No.13.48) ---- included all material and labour charges | m | 305.55 | 305.55 | 15.0 | False | None | None | False | None | False | 4583.25 | 0 | | 3204659 | 110147 | None | Vol.2, P.No.84, I.No.11.26.1 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineerin-Charge. (Vol.2, P.No.84, I.No.11.26.1) ---- included all material and labour charges | Kgs | 144.9 | 144.9 | 150.0 | False | None | None | False | None | False | 21735.0 | 0 | | 3204660 | 110147 | None | Vol.2, P.No.149, I.No.15.1 | Polyurethane based Single Component for New Surface: Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. (Vol.2, P.No.149, I.No.15.1) ---- included all material and labour charges | Sqm | 857.85 | 857.85 | 55.11 | False | None | None | False | None | False | 47276.1135 | 0 | | 3204661 | 110147 | None | Quotation rate | Providing and fixing Green board for class room (Quotation rate) ---- included all material and labour charges | Each | 8136.0 | 8136.0 | 2.0 | False | None | None | False | None | False | 16272.0 | 0 | | 3204662 | 110147 | None | Vol.2, P.No.200, I.No.20.34.1 | Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete.125x70x4 mm (ordinary type) (Vol.2, P.No.200, I.No.20.34.1) ---- included all material and labour charges | No | 178.5 | 178.5 | 4.0 | False | None | None | False | None | False | 714.0 | 0 | | 3204663 | 110147 | None | Vol.2, P.No.A-25, S.No.444 | Hold fasts (Vol.2, P.No.A-25, S.No.444) ---- included all material and labour charges | Nos | 50.0 | 50.0 | 6.0 | False | None | None | False | None | False | 300.0 | 0 | | 3204664 | 110147 | None | Vol.2, P.No.107, I.No.12.73.1 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete 125mm (Vol.2, P.No.107, I.No.12.73.1) ---- included all material and labour charges | No | 46.2 | 46.2 | 2.0 | False | None | None | False | None | False | 92.4 | 0 | | 3204665 | 110147 | None | Vol.2, P.No.105, I.No.12.60 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.(Vol.2, P.No.105, I.No.12.60) ---- included all material and labour charges | No | 1104.6 | 1104.6 | 1.0 | False | None | None | False | None | False | 1104.6 | 0 | | 3204666 | 110147 | None | Vol.2, P.No.107, I.No.12.63 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete (Vol.2, P.No.107, I.No.12.63) ---- included all material and labour charges | Nos | 136.5 | 136.5 | 2.0 | False | None | None | False | None | False | 273.0 | 0 | | 3204667 | 110147 | None | Vol. 2, P.No. 63, I. No.9.23 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : ** Flamed finish granite stone slab Black, Cat Eye, River Pink or equivalent. (Vol. 2, P.No. 63, I. No.9.23) ---- included all material and labour charges | Sqm | 2589.3 | 2589.3 | 25.97 | False | None | None | False | None | False | 67244.121 | 0 |
| | 1717057033000 | 0 | None | None | Buildings | ESTIMATE FOR Furnitures (Table and Chair) | 33520.0 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3204668 | 110148 | None | KSFIC DWD 052 | Teak Wood Table : Of size 6'x3'. Leg size 2.5"x2.5". Table frame to be 4"x1.25" thick pattis. Foot rest to be provided with 2"x1.5"=2 Nos. Table top to be laminated with 1mm thick laminate with teak edge banding lower side middle H - Shape patti. Table shall be neatly finished and polished. ---- included all material and labour charges | No | 23540.0 | 23540.0 | 1.0 | False | None | None | False | None | False | 23540.0 | 0 | | 3204669 | 110148 | None | KSFIC DWD 069 | Teak wood Chair (Heavy model): Seat with taek wood planks or cushion. Made out of teak wood chair 3''x1.25'' back legs 2.25''x2.25'' front legs chair side side bars 3''x1.25'' back with 8 reapers. Chair size standard size. Chair shall be neatly finished and polished. ---- included all material and labour charges | No | 9980.0 | 9980.0 | 1.0 | False | None | None | False | None | False | 9980.0 | 0 |
| | 1717057033000 | 0 | None | None | Buildings | ELECTRICAL ESTIMATE | 44481.0 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3204670 | 110149 | None | 1.8.2 | Supplying and fixing of PVC casing and capping on the wall or ceilingusing necessary materials like bends, junction box, elbows, screws at an interval of 300 mm as required. ---- included all material and labour charges | Mtr | 35.0 | 35.0 | 80.0 | False | None | None | False | None | False | 2800.0 | 0 | | 3204671 | 110149 | None | 1.6.5 | Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete ---- included all material and labour charges | Each | 74.0 | 74.0 | 8.0 | False | None | None | False | None | False | 592.0 | 0 | | 3204672 | 110149 | None | 2.1.2 | Point wiring using Copper wire with switch: Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for
each outlet. ---- included all material and labour charges | Point | 394.0 | 394.0 | 4.0 | False | None | None | False | None | False | 1576.0 | 0 | | 3204673 | 110149 | None | 2.1.3 | Long point above 6Mtr upto 10Mtr from tapping point to out let via
switch ---- included all material and labour charges | Point | 570.0 | 570.0 | 4.0 | False | None | None | False | None | False | 2280.0 | 0 | | 3204674 | 110149 | None | 2.3.2 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010.1.5MSQM ---- included all material and labour charges | Mtr | 26.0 | 26.0 | 125.0 | False | None | None | False | None | False | 3250.0 | 0 | | 3204675 | 110149 | None | 2.3.3 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010.2.5MSQM ---- included all material and labour charges | Mtr | 42.0 | 42.0 | 15.0 | False | None | None | False | None | False | 630.0 | 0 | | 3204676 | 110149 | None | 2.3.4 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010.4MSQM ---- included all material and labour charges | Mtr | 63.0 | 63.0 | 75.0 | False | None | None | False | None | False | 4725.0 | 0 | | 3204677 | 110149 | None | 3.4.1 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall.1.2 WAY ---- included all material and labour charges | Each | 138.0 | 138.0 | 3.0 | False | None | None | False | None | False | 414.0 | 0 | | 3204678 | 110149 | None | 3.4.5 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8 WAY ---- included all material and labour charges | Mtr | 261.0 | 261.0 | 1.0 | False | None | None | False | None | False | 261.0 | 0 | | 3204679 | 110149 | None | 3.4.6 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12 WAY ---- included all material and labour charges | Each | 319.0 | 319.0 | 5.0 | False | None | None | False | None | False | 1595.0 | 0 | | 3204680 | 110149 | None | 3.5.1 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 TO 2 MODULE ---- included all material and labour charges | Each | 137.0 | 137.0 | 3.0 | False | None | None | False | None | False | 411.0 | 0 | | 3204681 | 110149 | None | 3.5.5 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.8 MOUDULE ---- included all material and labour charges | Each | 284.0 | 284.0 | 1.0 | False | None | None | False | None | False | 284.0 | 0 | | 3204682 | 110149 | None | 3.5.6 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 10-12 MOUDULE
---- included all material and labour charges | Each | 344.0 | 344.0 | 2.0 | False | None | None | False | None | False | 688.0 | 0 | | 3204683 | 110149 | None | 3.6.1 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6A one way switch ---- included all material and labour charges | Each | 102.0 | 102.0 | 16.0 | False | None | None | False | None | False | 1632.0 | 0 | | 3204684 | 110149 | None | 3.6.4 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. stepped fan regulator two moudule ---- included all material and labour charges | Each | 357.0 | 357.0 | 2.0 | False | None | None | False | None | False | 714.0 | 0 | | 3204685 | 110149 | None | 3.6.7 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.16A one way switch ---- included all material and labour charges | Each | 180.0 | 180.0 | 6.0 | False | None | None | False | None | False | 1080.0 | 0 | | 3204686 | 110149 | None | 3.6.9 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.32A DP switch ---- included all material and labour charges | Each | 326.0 | 326.0 | 2.0 | False | None | None | False | None | False | 652.0 | 0 | | 3204687 | 110149 | None | 3.6.10 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293
6/16A universal socket ---- included all material and labour charges | Each | 236.0 | 236.0 | 4.0 | False | None | None | False | None | False | 944.0 | 0 | | 3204688 | 110149 | None | 3.6.3 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293
6 threeway socket ---- included all material and labour charges | Each | 171.0 | 171.0 | 4.0 | False | None | None | False | None | False | 684.0 | 0 | | 3204689 | 110149 | None | 11.3.2 | Supplying of .feet -PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.
LED LIGHT FITTING ---- included all material and labour charges | Each | 690.0 | 690.0 | 8.0 | False | None | None | False | None | False | 5520.0 | 0 | | 3204690 | 110149 | None | 5.7.2 | Supplying & fixing of Porcelain fuse channel with cut out on
existing wooden/panel using necessary nuts, bolts and washers.
32AMPS ---- included all material and labour charges | Each | 241.0 | 241.0 | 1.0 | False | None | None | False | None | False | 241.0 | 0 | | 3204691 | 110149 | None | 5.18.1 | Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.
6-32 a SP ---- included all material and labour charges | Each | 415.0 | 415.0 | 1.0 | False | None | None | False | None | False | 415.0 | 0 | | 3204692 | 110149 | None | 5.18.4 | Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.
6-32 A DP ---- included all material and labour charges | Each | 739.0 | 739.0 | 1.0 | False | None | None | False | None | False | 739.0 | 0 | | 3204693 | 110149 | None | 5.19.6 | Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.
II Double door ---- included all material and labour charges | Each | 1524.0 | 1524.0 | 1.0 | False | None | None | False | None | False | 1524.0 | 0 | | 3204694 | 110149 | None | 12.56 | Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia. ---- included all material and labour charges | No | 3510.0 | 3510.0 | 1.0 | False | None | None | False | None | False | 3510.0 | 0 | | 3204695 | 110149 | None | 6.3.2 | Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system.
56 sweep(1400mm) Regular ---- included all material and labour charges | Each | 3031.0 | 3031.0 | 2.0 | False | None | None | False | None | False | 6062.0 | 0 | | 3204696 | 110149 | None | 5.6.1 | Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws.
8*6*1.5 ---- included all material and labour charges | Each | 87.0 | 87.0 | 1.0 | False | None | None | False | None | False | 87.0 | 0 | | 3204697 | 110149 | None | 5.6.4 | Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws.
12*12*2 ---- included all material and labour charges | Each | 181.0 | 181.0 | 1.0 | False | None | None | False | None | False | 181.0 | 0 | | 3204698 | 110149 | None | 13.7.1 | Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamps.
on wall/ceiling/Rafter ---- included all material and labour charges | Each | 122.0 | 122.0 | 5.0 | False | None | None | False | None | False | 610.0 | 0 | | 3204699 | 110149 | None | 13.1 | Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing S hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring. ---- included all material and labour charges | Each | 171.0 | 171.0 | 2.0 | False | None | None | False | None | False | 342.0 | 0 | | 3204700 | 110149 | None | 1.9.1 | Supplying PVC flexible conduit pipe . mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using NF screws and on either end of the pipe terminated completely.
20mm ---- included all material and labour charges | Mtr | 19.0 | 19.0 | 2.0 | False | None | None | False | None | False | 38.0 | 0 |
|
|
|---|