| tenderSubEstimateList | | createdTs | version | createdDate | modifiedDate | workCategoryName | subEstimateName | estimateTotal | itemList |
|---|
| 1716967238000 | 1 | None | None | Buildings | Ground Floor -Civil work | 985616.04 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3197945 | 109935 | None | 1.14.1 v-1 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work In all kinds of soils Depth upto 3 m
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Cum | 134.8 | 134.8 | 22.32 | False | None | None | False | None | False | 3008.736 | 0 | | 3197946 | 109935 | None | 4.1 v-2 | Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications.
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Sqm | 155.95 | 155.95 | 8.84 | False | None | None | False | None | False | 1378.598 | 0 | | 3197947 | 109935 | None | 1.9 v-1 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Cum | 351.55 | 351.55 | 22.32 | False | None | None | False | None | False | 7846.596 | 0 | | 3197948 | 109935 | None | 2.1.3 v-1 | Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Cum | 7915.06 | 7915.06 | 0.97 | False | None | None | False | None | False | 7677.6082 | 0 | | 3197949 | 109935 | None | 2.2.3 v-1 | Providing and laying in position Cement Concrete
for all Foundation works. The granite/trap/basalt
crushed graded coarse aggregates and fine aggregates
as per relevant IS Codes machine mixed with super
plasticizers laid in finished layers, well compacted
using needle vibrators, including all lead & lifts, cost of
all materials, quality confirming to the requirements of
relevant IS codes, labour, Usage charges of machinery,
curing and all the other appurtenances required to
complete the work as per technical specifications.M25 Design Mix Using 20 mm and down size
graded crushed coarse aggregates ---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Cum | 9043.55 | 9043.55 | 3.83 | False | None | None | False | None | False | 34636.7965 | 0 | | 3197950 | 109935 | None | 2.5.2 v-1 | Providing and laying in position Cement Concrete for
all Super structures of building , Road works, Water
works, Irrigation works & super structure works of
bridges upto 3.50 m height. The granite/trap/basalt
crushed graded coarse aggregates and fine aggregates
as per relevant IS Codes machine mixed with super
plasticisers laid in layers, well compacted using needle
vibrators. The cost includes all lead & lifts, cost of all
materials, quality confirming to the requirements of
relevant IS codes , labour, Usage charges of machinery,
curing and all other appurtenances required to
complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.For Lift Wall
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Cum | 9948.08 | 9948.08 | 3.24 | False | None | None | False | None | False | 32231.7792 | 0 | | 3197951 | 109935 | None | 2.5.2 v-1 | Providing and laying in position Cement Concrete for
all Super structures of building , Road works, Water
works, Irrigation works & super structure works of
bridges upto 3.50 m height. The granite/trap/basalt
crushed graded coarse aggregates and fine aggregates
as per relevant IS Codes machine mixed with super
plasticisers laid in layers, well compacted using needle
vibrators. The cost includes all lead & lifts, cost of all
materials, quality confirming to the requirements of
relevant IS codes , labour, Usage charges of machinery,
curing and all other appurtenances required to
complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.For RCC Beams
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Cum | 14469.93 | 14469.93 | 1.09 | False | None | None | False | None | False | 15772.2237 | 0 | | 3197952 | 109935 | None | 2.5.2 v-1 | Providing and laying in position Cement Concrete for
all Super structures of building , Road works, Water
works, Irrigation works & super structure works of
bridges upto 3.50 m height. The granite/trap/basalt
crushed graded coarse aggregates and fine aggregates
as per relevant IS Codes machine mixed with super
plasticisers laid in layers, well compacted using needle
vibrators. The cost includes all lead & lifts, cost of all
materials, quality confirming to the requirements of
relevant IS codes , labour, Usage charges of machinery,
curing and all other appurtenances required to
complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.For RCC Columns
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Cum | 15374.3 | 15374.3 | 0.29 | False | None | None | False | None | False | 4458.547 | 0 | | 3197953 | 109935 | None | 2.11a v-1 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.Buildings ---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Tonne | 118226.37 | 118226.37 | 1.21 | False | None | None | False | None | False | 143053.9077 | 0 | | 3197954 | 109935 | None | 6.32 v-2 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Sqm | 1731.3 | 1731.3 | 33.95 | False | None | None | False | None | False | 58777.635 | 0 | | 3197955 | 109935 | None | 8.4.2 v-2 | Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Sqm | 412.34 | 412.34 | 36.51 | False | None | None | False | None | False | 15054.5334 | 0 | | 3197956 | 109935 | None | 8.51 v-2 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Sqm | 132.16 | 132.16 | 36.51 | False | None | None | False | None | False | 4825.1616 | 0 | | 3197957 | 109935 | None | 8.5.2 v-2 | Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Sqm | 461.24 | 461.24 | 765.77 | False | None | None | False | None | False | 353203.7548 | 0 | | 3197958 | 109935 | None | 8.39 v-2 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Sqm | 167.84 | 167.84 | 36.51 | False | None | None | False | None | False | 6127.8384 | 0 | | 3197959 | 109935 | None | 8.32 v-2 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Sqm | 206.17 | 206.17 | 765.77 | False | None | None | False | None | False | 157878.8009 | 0 | | 3197960 | 109935 | None | 19.55 v-2 | Dismantalling old plaster or skirting racking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground to the appropriate disposal area as per direction of engineer in charge. ---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Sqm | 48.89 | 48.89 | 729.26 | False | None | None | False | None | False | 35653.5214 | 0 | | 3197961 | 109935 | None | Job | The Tendorer (Agency ) should arrange to obtain (Get) , detailed Architectural drawings and elevations, Structural designs and drawings including Soil exploration & proof checking by IISC /IIT/NIT only as decided by the Department and the same has to be furnished to the Department for approval and providing consultancy for Architectural designs & drawings, elevation, 3D view, MFP design and Drawings, Internal and External Electrical services including electrical infrastructure , interior layout and liaison with other department and approval of pollution control board and allied works etc., and any other drawings related to this project and 6 sets of as built drawings should be submitted to the employer. The Consultancy Fees which is included as an item in schedule B shall be paid on prorate basis of the main work or by negotiation with the employer. - etc., complete as per the specification and Engineer-in-charge of work ---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Job | 104030.0 | 104030.0 | 1.0 | False | None | None | False | None | False | 104030.0 | 0 |
| | 1716967238000 | 0 | None | None | Buildings | First Floor- Civil work | 731026.6 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3197962 | 109936 | None | 2.5.2 v-1 | Providing and laying in position Cement Concrete for
all Super structures of building , Road works, Water
works, Irrigation works & super structure works of
bridges upto 3.50 m height. The granite/trap/basalt
crushed graded coarse aggregates and fine aggregates
as per relevant IS Codes machine mixed with super
plasticisers laid in layers, well compacted using needle
vibrators. The cost includes all lead & lifts, cost of all
materials, quality confirming to the requirements of
relevant IS codes , labour, Usage charges of machinery,
curing and all other appurtenances required to
complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.For Lift Columns
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Cum | 15528.05 | 15528.05 | 1.15 | False | None | None | False | None | False | 17857.2575 | 0 | | 3197963 | 109936 | None | 2.5.2 v-1 | Providing and laying in position Cement Concrete for
all Super structures of building , Road works, Water
works, Irrigation works & super structure works of
bridges upto 3.50 m height. The granite/trap/basalt
crushed graded coarse aggregates and fine aggregates
as per relevant IS Codes machine mixed with super
plasticisers laid in layers, well compacted using needle
vibrators. The cost includes all lead & lifts, cost of all
materials, quality confirming to the requirements of
relevant IS codes , labour, Usage charges of machinery,
curing and all other appurtenances required to
complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.For RCC Beams
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Cum | 14614.63 | 14614.63 | 1.09 | False | None | None | False | None | False | 15929.9467 | 0 | | 3197964 | 109936 | None | V-1 18 2.11a | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.Buildings
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Tonne | 119408.63 | 119408.63 | 0.47 | False | None | None | False | None | False | 56122.0561 | 0 | | 3197965 | 109936 | None | 6.32 v-2 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Sqm | 1748.61 | 1748.61 | 36.51 | False | None | None | False | None | False | 63841.7511 | 0 | | 3197966 | 109936 | None | 8.4.2 V-2 | Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Sqm | 416.46 | 416.46 | 36.51 | False | None | None | False | None | False | 15204.9546 | 0 | | 3197967 | 109936 | None | 8.10 v-2 | Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Sqm | 281.65 | 281.65 | 11.51 | False | None | None | False | None | False | 3241.7915 | 0 | | 3197968 | 109936 | None | 8.51 v-2 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Sqm | 200.22 | 200.22 | 48.02 | False | None | None | False | None | False | 9614.5644 | 0 | | 3197969 | 109936 | None | 8.39 v-2 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Sqm | 169.52 | 169.52 | 11.51 | False | None | None | False | None | False | 1951.1752 | 0 | | 3197970 | 109936 | None | 8.32 v-2 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Sqm | 208.23 | 208.23 | 765.77 | False | None | None | False | None | False | 159456.2871 | 0 | | 3197971 | 109936 | None | 19.55 v-2 | Dismantalling old plaster or skirting racking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground to the appropriate disposal area as per direction of engineer in charge ---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Sqm | 49.38 | 49.38 | 629.26 | False | None | None | False | None | False | 31072.8588 | 0 | | 3197972 | 109936 | None | 8.5.2 V-2 | Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ( Outside) ---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Sqm | 465.85 | 465.85 | 765.77 | False | None | None | False | None | False | 356733.9545 | 0 |
| | 1716967238000 | 1 | None | None | Buildings | Second Floor-Civil work | 6915789.36 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3197973 | 109937 | None | 19.7.3 v-2 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.In cement mortar
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Cum | 1387.12 | 1387.12 | 6.57 | False | None | None | False | None | False | 9113.3784 | 0 | | 3197974 | 109937 | None | 2.5.2 v-1 | Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed with
super plasticisers laid in layers, well compacted using needle vibrators. The
cost includes all lead & lifts, cost of all materials, quality confirming to the
requirements of relevant IS codes , labour, Usage charges of machinery, curing
and all other appurtenances required to complete the work as per technical
specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.RCC Beams & Lintels
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Cum | 14759.33 | 14759.33 | 18.87 | False | None | None | False | None | False | 278508.5571 | 0 | | 3197975 | 109937 | None | 2.5.2 v-1 | Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed with
super plasticisers laid in layers, well compacted using needle vibrators. The
cost includes all lead & lifts, cost of all materials, quality confirming to the
requirements of relevant IS codes , labour, Usage charges of machinery, curing
and all other appurtenances required to complete the work as per technical
specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.For RCC Roof Slab ---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Cum | 13836.87 | 13836.87 | 52.18 | False | None | None | False | None | False | 722007.8766 | 0 | | 3197976 | 109937 | None | 2.5.2 v-2 | Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed with
super plasticisers laid in layers, well compacted using needle vibrators. The
cost includes all lead & lifts, cost of all materials, quality confirming to the
requirements of relevant IS codes , labour, Usage charges of machinery, curing
and all other appurtenances required to complete the work as per technical
specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.For RCC Colums ---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Cum | 15681.79 | 15681.79 | 10.26 | False | None | None | False | None | False | 160895.1654 | 0 | | 3197977 | 109937 | None | 2.5.2 v-1 | Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes machine mixed with
super plasticisers laid in layers, well compacted using needle vibrators. The
cost includes all lead & lifts, cost of all materials, quality confirming to the
requirements of relevant IS codes , labour, Usage charges of machinery, curing
and all other appurtenances required to complete the work as per technical
specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.For RCC Chajjas
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Cum | 13375.65 | 13375.65 | 1.36 | False | None | None | False | None | False | 18190.884 | 0 | | 3197978 | 109937 | None | 2.11a-v-1 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.Buildings ---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Tonne | 120590.9 | 120590.9 | 10.23 | False | None | None | False | None | False | 1233644.907 | 0 | | 3197979 | 109937 | None | 5.7 v-2 | Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification. I.S. 3620/1979 having compressive strength not less then 3.5 N/mm2 for saturated dry samples for superstructure in CM 1:6.
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Cum | 9105.96 | 9105.96 | 28.26 | False | None | None | False | None | False | 257334.4296 | 0 | | 3197980 | 109937 | None | 6.32 v-2 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Sqm | 1765.92 | 1765.92 | 194.71 | False | None | None | False | None | False | 343842.2832 | 0 | | 3197981 | 109937 | None | 6.34 v-2 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.
SECOND FLOOR
Male & Female toilet
Male & Female toilet
Deduction
D3
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Sqm | 1488.23 | 1488.23 | 41.22 | False | None | None | False | None | False | 61344.8406 | 0 | | 3197982 | 109937 | None | 12.93.3 V-2 | Providing and fixing factory made single extruded WPC (Wood Polymer
Composite) solid door/window/Clerestory windows & other Frames/
Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension
Grade), calcium carbonate and natural fibres (wood powder/rice husk/
wheat husk) and non toxic additives (maximum toxicity index of 12 for
100 g) fabricated with miter joints after applying PVC solvent cement and
screwed with full body threaded star headed SS screws having minimum
frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) &
1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of
elasticity 900 N/mm2 and resistance to spread of flame of Class A category
with property of being termite/borer proof, water/moisture proof and fire
retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners
of required dia and length complete as per direction of Engineer-InCharge.
(Fixtures shall be paid for separately)Size 62 x 150mm ---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | m | 1087.86 | 1087.86 | 89.1 | False | None | None | False | None | False | 96928.326 | 0 | | 3197983 | 109937 | None | 12.51 v-2 | Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | No | 1369.6 | 1369.6 | 12.0 | False | None | None | False | None | False | 16435.2 | 0 | | 3197984 | 109937 | None | 10.6.3 v-2 | Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 80.88 | 80.88 | 72.0 | False | None | None | False | None | False | 5823.36 | 0 | | 3197985 | 109937 | None | 12.57.4 v-2 | Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 35 mm thick both side Teak
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Sqm | 6109.28 | 6109.28 | 28.35 | False | None | None | False | None | False | 173198.088 | 0 | | 3197986 | 109937 | None | 12.90 v-2 | Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Sqm | 9077.65 | 9077.65 | 20.25 | False | None | None | False | None | False | 183822.4125 | 0 | | 3197987 | 109937 | None | 12.85 v-2 | Providing & fixing of louvered ventilator made out of multi chambered UPVC Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Sqm | 7709.4 | 7709.4 | 2.7 | False | None | None | False | None | False | 20815.38 | 0 | | 3197988 | 109937 | None | 11.34B v-2 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings/wooden frames with raul plugs screws etc.
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Kg | 246.69 | 246.69 | 481.95 | False | None | None | False | None | False | 118892.2455 | 0 | | 3197989 | 109937 | None | 12.93.2 v-2 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door window/Clerestory windows & other Frames Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer InCharge.
(Fixtures shall be paid for separately) Size 62x125mm"
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | m | 1029.9 | 1029.9 | 20.4 | False | None | None | False | None | False | 21009.96 | 0 | | 3197990 | 109937 | None | 12.94.1 v-2 | Providing and fixing factory made Green certified, Anti Termite, UV resistant,high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges.(Cost of Fixtures to be paid separately)30mm thickness.
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Sqm | 4697.89 | 4697.89 | 7.56 | False | None | None | False | None | False | 35516.0484 | 0 | | 3197991 | 109937 | None | 12.59 v-2 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | No | 1501.71 | 1501.71 | 12.0 | False | None | None | False | None | False | 18020.52 | 0 | | 3197992 | 109937 | None | 11.25.2 v-2 | Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Kg | 183.33 | 183.33 | 120.96 | False | None | None | False | None | False | 22175.5968 | 0 | | 3197993 | 109937 | None | 8.4.2 v-2 | Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ( Inside)
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Sqm | 420.59 | 420.59 | 824.21 | False | None | None | False | None | False | 346654.4839 | 0 | | 3197994 | 109937 | None | 8.10 v-2 | Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Sqm | 284.43 | 284.43 | 269.41 | False | None | None | False | None | False | 76628.2863 | 0 | | 3197995 | 109937 | None | 8.51 v-2 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Sqm | 134.8 | 134.8 | 1093.62 | False | None | None | False | None | False | 147419.976 | 0 | | 3197996 | 109937 | None | 8.9 v-2 | Providing 18 mm cement plaster in two coats under layer 12 mm thick
cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a
top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement
: 3 coarse sand) finished rough with sponge to brick masonry including
rounding off corners wherever required smooth rendering, providing and
removing scaffolding, including cost of materials, labour, curing complete
as per specifications and as per directions of Engineer-in-charge. ( Outside)
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Sqm | 518.99 | 518.99 | 419.2 | False | None | None | False | None | False | 217560.608 | 0 | | 3197997 | 109937 | None | 8.79 v-2 | Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge: 10mm to 15 mm wide and 8 mm deep groove.
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | m | 70.1 | 70.1 | 58.2 | False | None | None | False | None | False | 4079.82 | 0 | | 3197998 | 109937 | None | 9.17.2 v-2 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.).Size of Tile 600x600 mm
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Sqm | 1583.94 | 1583.94 | 309.5 | False | None | None | False | None | False | 490229.43 | 0 | | 3197999 | 109937 | None | 9.29 v-2 | Providing and laying flooring and steps fine dressed granite stone slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications.
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Sqm | 5804.63 | 5804.63 | 18.54 | False | None | None | False | None | False | 107617.8402 | 0 | | 3198000 | 109937 | None | 15.7 v-2 | Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration confirming to ASTM C 1202 with 64% improvement against control & protecting steel re-inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis)
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Sqm | 829.04 | 829.04 | 32.33 | False | None | None | False | None | False | 26802.8632 | 0 | | 3198001 | 109937 | None | 9.11 v-2 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness
to be specified by the manufacturer), of 1st quality conforming to
IS : 15622, of approved make, in all colours, shades, except White, Ivory,
Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1
Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2
including pointing the joints with white cement and matching pigments
etc., complete. ---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Sqm | 1198.4 | 1198.4 | 32.33 | False | None | None | False | None | False | 38744.272 | 0 | | 3198002 | 109937 | None | 9.39 v-2 | Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm
thick on 10mm thick cement plaster 1:3 and jointed with white cement
slurry over existing rough plaster surface using glazed tiles of approved
make and size including cost of materials, labour, complete as per
specifications. ---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Sqm | 1953.3 | 1953.3 | 106.01 | False | None | None | False | None | False | 207069.333 | 0 | | 3198003 | 109937 | None | 8.39 v-2 | Wall painting with acrylic emulsion paint of approved brand and
manufacture to give an even shade :Two coats on new work after
thoroughly brooming the surface to remove all dirt, dust, mortar drops
and foreign matter including preparing the surface even and sand paper
smooth, cost of materials, labour complete as per specifications and as per
directions of Engineer-in-charge ---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Sqm | 171.2 | 171.2 | 1093.62 | False | None | None | False | None | False | 187227.744 | 0 | | 3198004 | 109937 | None | 8.32 v-2 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Sqm | 210.29 | 210.29 | 419.2 | False | None | None | False | None | False | 88153.568 | 0 | | 3198005 | 109937 | None | 8.40 v-2 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per dir
ections of Engineer-in-charge.
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Sqm | 155.02 | 155.02 | 22.95 | False | None | None | False | None | False | 3557.709 | 0 | | 3198006 | 109937 | None | 8.34.1 v-2 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Sqm | 71.45 | 71.45 | 68.04 | False | None | None | False | None | False | 4861.458 | 0 | | 3198007 | 109937 | None | 8.47 v-2 | Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Sqm | 181.98 | 181.98 | 68.04 | False | None | None | False | None | False | 12381.9192 | 0 | | 3198008 | 109937 | None | 12.92 v-2 | Providing& fixing of Openable door made out of multi chambered
UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium
Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free
with gaskets -grey colour having isolated drainage and reinforced with
Galvanized Iron profile through-out the openable frame. The frame having
overall size of 60mm x 55mm with GI reinforcement of 1mm thickness and
openable sash with overall size of 60mm x 102mm and GI reinforcement of
2mm thickness. Coextruded Glazing bead for fixing of glass shall be of size
20mm x 34 mm. Windows shall be provided with 6mm plain float glass,
Standard hardware with 2D/3D hinge & Multi point locking system with
Handle. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum
possible size. 900mm x 2400mm. (The cost is inclusive of all fixtures and
separate charges for minor T&P's shall not be made) ---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Sqm | 8418.46 | 8418.46 | 2.4 | False | None | None | False | None | False | 20204.304 | 0 | | 3198009 | 109937 | None | 12.91 v-2 | Providing& fixing of Openable window made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the openable frame. The frame having overall size of 60mm x 55mm with GI reinforcement of 1mm thickness and openable sash with overall size of 60mm x 75mm and GI reinforcement of 1.5mm thickness. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 34 mm. Windows shall be provided with 5mm plain float glass, Standard hardware with friction hinge & Multi point locking system with Handle. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 900mm x 1819mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Sqm | 8171.77 | 8171.77 | 7.2 | False | None | None | False | None | False | 58836.744 | 0 | | 3198010 | 109937 | None | SR 2018-19.324 39.4 | Providing and fixing storage unit of 0. 75m depth made out of 19mm thick commercial ply vertical support finished in approved 1.00mm laminate with 12mm thick ply packing internally finished with enamel paint of approved colour and shade shelves shall be formed out of 19mm ply finished with enamel paint of approved shade and colour and 19mm thick shutters formed out of 19mm thick ply finished with 1.00mm thick laminate of approved shade and colour etc., complete the rate includes cost of all materials, labour charges, complete as per specification. - - - etc., complete with all lead & lift, as per specifications and as per directions of the Engineer in charge of the work.
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Sqm | 17618.78 | 17618.78 | 24.72 | False | None | None | False | None | False | 435536.2416 | 0 | | 3198011 | 109937 | None | 9.21.2 v-2 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Sqm | 1668.86 | 1668.86 | 18.54 | False | None | None | False | None | False | 30940.6644 | 0 | | 3198012 | 109937 | None | 10.1.7 v-5 | Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 110mm dia., 6 kg/sqcm & class 3
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Mtr | 554.04 | 554.04 | 42.0 | False | None | None | False | None | False | 23269.68 | 0 | | 3198013 | 109937 | None | V-2 152 15.12 | Newly Constructed Roof/Podium with PU Waterproof coating - Above
500 m2
Providing and Applying single component Polyurethane based cold applied
seamless waterproofing coating to the RCC surface like Roof & Podium
area applied @ 2.4kg/m2 in 3 coats to achieve 1.5mm DFT, including a
prime coat of solvent free, medium viscous, epoxy primer @0.2L/m2 and
protection with 120gsm Geo-textile over the 7 days cured waterproofing
membrane. The Waterproofing material shall have Solids 85%, Tensile
strength greater than 2 Mpa as per ASTM D 412, Elongation at break greater than 400% confirms
to ASTM C 1305 for crack bridging ability (no cracks up to 3.2mm) Shore A
Hardness greater than 55 as per ASTM D 2240, Adhesion to peel after water immersion
as per ASTM C 794 at 5.2N. Resistance to root penetration as per UNE
CN/ TS 14416. The finished cost to include surface preparation, making
coving of 50 mm X 50mm at all right angles of wall Junction with Polymer
Repair Mortar and lay 60gsm Geo-textile over the angle fillet when the
first coat in still wet, treatment of cracks completely as per specification ---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Sqm | 1570.46 | 1570.46 | 376.0 | False | None | None | False | None | False | 590492.96 | 0 |
| | 1716967238000 | 0 | None | None | Buildings | Lift room third floor-Civil work | 208374.16 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3198014 | 109938 | None | 2.5.2 v-1 | Providing and laying in position Cement Concrete for
all Super structures of building , Road works, Water
works, Irrigation works & super structure works of
bridges upto 3.50 m height. The granite/trap/basalt
crushed graded coarse aggregates and fine aggregates
as per relevant IS Codes machine mixed with super
plasticisers laid in layers, well compacted using needle
vibrators. The cost includes all lead & lifts, cost of all
materials, quality confirming to the requirements of
relevant IS codes , labour, Usage charges of machinery,
curing and all other appurtenances required to
complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
For RCC Columns
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Cum | 15528.05 | 15528.05 | 1.15 | False | None | None | False | None | False | 17857.2575 | 0 | | 3198015 | 109938 | None | 2.5.2 v-1 | Providing and laying in position Cement Concrete for
all Super structures of building , Road works, Water
works, Irrigation works & super structure works of
bridges upto 3.50 m height. The granite/trap/basalt
crushed graded coarse aggregates and fine aggregates
as per relevant IS Codes machine mixed with super
plasticisers laid in layers, well compacted using needle
vibrators. The cost includes all lead & lifts, cost of all
materials, quality confirming to the requirements of
relevant IS codes , labour, Usage charges of machinery,
curing and all other appurtenances required to
complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.For RCC Beams
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Cum | 14614.63 | 14614.63 | 1.09 | False | None | None | False | None | False | 15929.9467 | 0 | | 3198016 | 109938 | None | V-1 18 2.11a | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.Buildings
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | t | 119408.63 | 119408.63 | 0.47 | False | None | None | False | None | False | 56122.0561 | 0 | | 3198017 | 109938 | None | 6.32 v-2 | Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Sqm | 1748.61 | 1748.61 | 36.51 | False | None | None | False | None | False | 63841.7511 | 0 | | 3198018 | 109938 | None | 8.4.2 v-2 | Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ( Inside)
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Sqm | 416.46 | 416.46 | 36.51 | False | None | None | False | None | False | 15204.9546 | 0 | | 3198019 | 109938 | None | 8.10 v-2 | Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Sqm | 281.65 | 281.65 | 11.51 | False | None | None | False | None | False | 3241.7915 | 0 | | 3198020 | 109938 | None | 8.51 v-2 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Sqm | 200.22 | 200.22 | 48.02 | False | None | None | False | None | False | 9614.5644 | 0 | | 3198021 | 109938 | None | 8.5.2 v-2 | Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ( Outside)
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Sqm | 465.85 | 465.85 | 36.51 | False | None | None | False | None | False | 17008.1835 | 0 | | 3198022 | 109938 | None | 8.39 v-2 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Sqm | 169.52 | 169.52 | 11.51 | False | None | None | False | None | False | 1951.1752 | 0 | | 3198023 | 109938 | None | 8.32 v-2 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied @ 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied @ 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Sqm | 208.23 | 208.23 | 36.51 | False | None | None | False | None | False | 7602.4773 | 0 |
| | 1716967238000 | 0 | None | None | Buildings | Water supply and sanitary works | 282963.68 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3198024 | 109939 | None | 14.28.2.2 v-2 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
40mm dia pipes, ---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 124.02 | 124.02 | 12.0 | False | None | None | False | None | False | 1488.24 | 0 | | 3198025 | 109939 | None | 16.7.4 v-5 | Providing and fixing normal gauge polythene pipes of approved quality with special flange compression type fittings of approved make including trench excavation and refilling etc. for EXTERNAL WORKS with:
50mm nominal bore pipes, ---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | m | 187.38 | 187.38 | 15.0 | False | None | None | False | None | False | 2810.7 | 0 | | 3198026 | 109939 | None | 657 v-5 | Providing and fixing PVC pipe - OD 75mm and 6 Kg/sqcm,
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | m | 165.81 | 165.81 | 40.0 | False | None | None | False | None | False | 6632.4 | 0 | | 3198027 | 109939 | None | 647 v-5 | Providing and fixing PVC pipe - OD 110mm and 6 Kg/sqcm,
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | m | 343.75 | 343.75 | 30.0 | False | None | None | False | None | False | 10312.5 | 0 | | 3198028 | 109939 | None | 13.47 v-2 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expansion,(i)the single socketed pipes 75mm diameter
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | m | 265.56 | 265.56 | 30.0 | False | None | None | False | None | False | 7966.8 | 0 | | 3198029 | 109939 | None | 13.48 v-2 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expansion,(i)the single socketed pipes 100mm diameter
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | m | 392.28 | 392.28 | 20.0 | False | None | None | False | None | False | 7845.6 | 0 | | 3198030 | 109939 | None | 14.31 v-2 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 1644.6 | 1644.6 | 4.0 | False | None | None | False | None | False | 6578.4 | 0 | | 3198031 | 109939 | None | 13.16 v-2 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | No | 835.78 | 835.78 | 10.0 | False | None | None | False | None | False | 8357.8 | 0 | | 3198032 | 109939 | None | 14.3.1 v-2 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C pan with ISI marked white solid plastic seat and lid ---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 8057.19 | 8057.19 | 2.0 | False | None | None | False | None | False | 16114.38 | 0 | | 3198033 | 109939 | None | 13.15 v-2 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | No | 977.32 | 977.32 | 5.0 | False | None | None | False | None | False | 4886.6 | 0 | | 3198034 | 109939 | None | 14.11.2 v-2 | Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 6850.7 | 6850.7 | 10.0 | False | None | None | False | None | False | 68507.0 | 0 | | 3198035 | 109939 | None | 14.7.1 v-2 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 4154.63 | 4154.63 | 3.0 | False | None | None | False | None | False | 12463.89 | 0 | | 3198036 | 109939 | None | 14.22 a v-2 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality& make and as per the direction of Engineer-in-charge.
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 1091.91 | 1091.91 | 6.0 | False | None | None | False | None | False | 6551.46 | 0 | | 3198037 | 109939 | None | 978 v-2 | Providing and fixing Unplasticised P.V.C.connection pipe with brass union 30 cm long 15
mm bore
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 51.23 | 51.23 | 10.0 | False | None | None | False | None | False | 512.3 | 0 | | 3198038 | 109939 | None | 14.37.1 v-2 | Bottle trap 31mm single piece moulded with height of 270 mm, effective
length of tail pipe 260 mm from the centre of the waste coupling, 77 mm
breadth with 25 mm minimum water seal, weighing not less than 260g ---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 412.5 | 412.5 | 26.0 | False | None | None | False | None | False | 10725.0 | 0 | | 3198039 | 109939 | None | 13.2.1 v-2 | Providing and fixing brass bib cock of approved quality
15 mm nominal bore
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | No | 385.54 | 385.54 | 10.0 | False | None | None | False | None | False | 3855.4 | 0 | | 3198040 | 109939 | None | 13.32.1 v-2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making
good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.15 mm nominal dia Pipes
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | m | 416.54 | 416.54 | 20.0 | False | None | None | False | None | False | 8330.8 | 0 | | 3198041 | 109939 | None | 13.32.2 v-2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making
good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.20 mm nominal dia Pipes
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | m | 510.9 | 510.9 | 30.0 | False | None | None | False | None | False | 15327.0 | 0 | | 3198042 | 109939 | None | 13.33.2 v-2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply including all CPVC
plain & brass threaded fittings This includes jointing of pipes & fittings
with one step CPVC solvent cement, trenching, refilling & testing of joints
complete as per direction of Engineer in Charge. External work
20 mm nominal dia Pipes
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | m | 292.52 | 292.52 | 30.0 | False | None | None | False | None | False | 8775.6 | 0 | | 3198043 | 109939 | None | 13.33.3 v-2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply including all CPVC
plain & brass threaded fittings This includes jointing of pipes & fittings
with one step CPVC solvent cement, trenching, refilling & testing of joints
complete as per direction of Engineer in Charge. External work
25 mm nominal dia Pipes
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | m | 399.02 | 399.02 | 20.0 | False | None | None | False | None | False | 7980.4 | 0 | | 3198044 | 109939 | None | 13.4.1 v-2 | Providing and fixing Brass full way valve with C.I. wheel (screwed end) 25 mm dia
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | No | 740.07 | 740.07 | 8.0 | False | None | None | False | None | False | 5920.56 | 0 | | 3198045 | 109939 | None | 16.9 v-5 | Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 7352.17 | 7352.17 | 5.0 | False | None | None | False | None | False | 36760.85 | 0 | | 3198046 | 109939 | None | 13.34 v-2 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank,IS:12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank.
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Ltr | 12.13 | 12.13 | 2000.0 | False | None | None | False | None | False | 24260.0 | 0 |
| | 1716967238000 | 0 | None | None | Buildings | Internal Electrification | 1351939.05 | | id | tenderSubEstimateId | categoryName | itemCode | description | uomName | baseRate | finalRate | quantity | modifyQuantityYn | minQuantity | maxQuantity | buyBackYn | buyBackValue | hideYn | netAmount | taxCount |
|---|
| 3198047 | 109940 | None | 2.2.1 v-6 | Point wiring using Copper wire without switch.
"Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to
IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet."
Short point up to 3Mtr from tapping point to out let via switch
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Point | 355.51 | 355.51 | 25.0 | False | None | None | False | None | False | 8887.75 | 0 | | 3198048 | 109940 | None | 2.2.2 v-6 | Point wiring using Copper wire without switch.
"Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to
IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet."
Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Point | 500.89 | 500.89 | 34.0 | False | None | None | False | None | False | 17030.26 | 0 | | 3198049 | 109940 | None | 2.2.3 v-6 | Point wiring using Copper wire without switch.
"Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to
IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet."
Long point above 6Mtr up to 10Mtr from tapping point to out let via switch
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Point | 733.49 | 733.49 | 40.0 | False | None | None | False | None | False | 29339.6 | 0 | | 3198050 | 109940 | None | 2.2.4 v-6 | Point wiring using Copper wire without switch.
"Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to
IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet."
Two outlet in a row, above 3Mtr up to 6Mtr from tapping point to out let via switches
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Point | 894.72 | 894.72 | 6.0 | False | None | None | False | None | False | 5368.32 | 0 | | 3198051 | 109940 | None | 3.4.1 v-6 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall
1-2Way
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 182.38 | 182.38 | 20.0 | False | None | None | False | None | False | 3647.6 | 0 | | 3198052 | 109940 | None | 3.4.4 v-6 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall
4-5Way
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 233.92 | 233.92 | 8.0 | False | None | None | False | None | False | 1871.36 | 0 | | 3198053 | 109940 | None | 3.4.4 v-6 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall
6Way
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 290.75 | 290.75 | 4.0 | False | None | None | False | None | False | 1163.0 | 0 | | 3198054 | 109940 | None | 3.4.5 v-6 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall
8 Way
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 344.94 | 344.94 | 16.0 | False | None | None | False | None | False | 5519.04 | 0 | | 3198055 | 109940 | None | 3.4.6 v-6 | Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall
10-12Way
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 421.59 | 421.59 | 35.0 | False | None | None | False | None | False | 14755.65 | 0 | | 3198056 | 109940 | None | 3.5.1 v-6 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.
1 to 2 Module
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 181.06 | 181.06 | 20.0 | False | None | None | False | None | False | 3621.2 | 0 | | 3198057 | 109940 | None | 3.5.3 v-6 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.
4 Module
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 231.28 | 231.28 | 8.0 | False | None | None | False | None | False | 1850.24 | 0 | | 3198058 | 109940 | None | 3.5.4 v-6 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.
6 Module
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 309.25 | 309.25 | 4.0 | False | None | None | False | None | False | 1237.0 | 0 | | 3198059 | 109940 | None | 3.5.5 v-6 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.
8 Module
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 375.33 | 375.33 | 16.0 | False | None | None | False | None | False | 6005.28 | 0 | | 3198060 | 109940 | None | 3.5.6 v-6 | Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.
10-12 Module
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 454.63 | 454.63 | 35.0 | False | None | None | False | None | False | 15912.05 | 0 | | 3198061 | 109940 | None | 3.6.1 v-6 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.
6Amps one way Switch
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 134.8 | 134.8 | 184.0 | False | None | None | False | None | False | 24803.2 | 0 | | 3198062 | 109940 | None | 3.6.3 v-6 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.
6Amps 3way socket
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 219.39 | 219.39 | 79.0 | False | None | None | False | None | False | 17331.81 | 0 | | 3198063 | 109940 | None | 3.6.4 v-6 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.
Stepped Fan Regulator.
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 471.81 | 471.81 | 24.0 | False | None | None | False | None | False | 11323.44 | 0 | | 3198064 | 109940 | None | 3.6.8 v-6 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.
16Amps one way switch
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 237.89 | 237.89 | 5.0 | False | None | None | False | None | False | 1189.45 | 0 | | 3198065 | 109940 | None | 3.6.9 v-6 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.
32Amps DP switch
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 430.84 | 430.84 | 13.0 | False | None | None | False | None | False | 5600.92 | 0 | | 3198066 | 109940 | None | 3.6.10 v-6 | Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.
6/16Amps universal socket
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 311.9 | 311.9 | 18.0 | False | None | None | False | None | False | 5614.2 | 0 | | 3198067 | 109940 | None | 1.13 v-6 | Supplyin and Fixing Metal Fan Box with Round Hook.
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | No | 154.63 | 154.63 | 24.0 | False | None | None | False | None | False | 3711.12 | 0 | | 3198068 | 109940 | None | 1.2.1 v-6 | Concealed Conduit System
Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2)
19/20mm dia 2mm thick
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Mtr | 87.23 | 87.23 | 800.0 | False | None | None | False | None | False | 69784.0 | 0 | | 3198069 | 109940 | None | 1.2.2 v-6 | Concealed Conduit System
Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2)
25mm dia 2mm thick
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Mtr | 103.08 | 103.08 | 920.0 | False | None | None | False | None | False | 94833.6 | 0 | | 3198070 | 109940 | None | 1.2.3 v-6 | Concealed Conduit System
Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures. run with 18SWG GI fish wire wherever necessary(2/2)
32mm dia 2.5mm thick
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Mtr | 136.12 | 136.12 | 100.0 | False | None | None | False | None | False | 13612.0 | 0 | | 3198071 | 109940 | None | 1.3.1 v-6 | Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary.
19/20mm dia 2mm thick
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Mtr | 89.87 | 89.87 | 400.0 | False | None | None | False | None | False | 35948.0 | 0 | | 3198072 | 109940 | None | 1.3.2 v-6 | Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary.
25mm dia 2mm thick
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Mtr | 104.41 | 104.41 | 250.0 | False | None | None | False | None | False | 26102.5 | 0 | | 3198073 | 109940 | None | 1.3.3 v-6 | Supplying heavy gauge PVC conduit pipe …….dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary.
32mm dia 2.5mm thick
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Mtr | 130.84 | 130.84 | 50.0 | False | None | None | False | None | False | 6542.0 | 0 | | 3198074 | 109940 | None | 2.3.2 v-6 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest
amendments."
1.5 sqmm
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Mtr | 34.36 | 34.36 | 400.0 | False | None | None | False | None | False | 13744.0 | 0 | | 3198075 | 109940 | None | 2.3.3 v-6 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest
amendments."
2.5 sqmm
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Mtr | 55.51 | 55.51 | 800.0 | False | None | None | False | None | False | 44408.0 | 0 | | 3198076 | 109940 | None | 2.3.4 v-6 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest
amendments."
4 sqmm
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Mtr | 83.26 | 83.26 | 500.0 | False | None | None | False | None | False | 41630.0 | 0 | | 3198077 | 109940 | None | 2.3.5 v-6 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest
amendments."
6 sqmm
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Mtr | 121.59 | 121.59 | 300.0 | False | None | None | False | None | False | 36477.0 | 0 | | 3198078 | 109940 | None | 2.3.6 v-6 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest
amendments."
10 sqmm
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Mtr | 220.71 | 220.71 | 200.0 | False | None | None | False | None | False | 44142.0 | 0 | | 3198079 | 109940 | None | 5.19.4 v-6 | Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I phase I single door with powder coated painting. Made out of 14 SWG MS enclosure
I- Single Door
12 Way SP & N
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 2462.14 | 2462.14 | 1.0 | False | None | None | False | None | False | 2462.14 | 0 | | 3198080 | 109940 | None | 5.19.11 v-6 | Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I phase I single door with powder coated painting. Made out of 14 SWG MS enclosure
III - Double Door
4 Way TPN DB
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 5336.62 | 5336.62 | 1.0 | False | None | None | False | None | False | 5336.62 | 0 | | 3198081 | 109940 | None | 5.19.12 v-6 | Supplying and fixing regular MCB distribution boards on wall/ wood board I flush mounting using required clamps,i bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase I phase I single door with powder coated painting. Made out of 14 SWG MS enclosure
III - Double door
6 Way TP & N
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 6528.7 | 6528.7 | 1.0 | False | None | None | False | None | False | 6528.7 | 0 | | 3198082 | 109940 | None | 5.18.1 v-6 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898
6-32Amps SP
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 548.46 | 548.46 | 40.0 | False | None | None | False | None | False | 21938.4 | 0 | | 3198083 | 109940 | None | 5.18.8 v-6 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898
40 A TPN
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 4022.95 | 4022.95 | 1.0 | False | None | None | False | None | False | 4022.95 | 0 | | 3198084 | 109940 | None | 5.18.9 v-6 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898
50-63Amps TPN
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 4081.1 | 4081.1 | 1.0 | False | None | None | False | None | False | 4081.1 | 0 | | 3198085 | 109940 | None | 5.18.4 v-6 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898
6-32 A DP
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 976.66 | 976.66 | 1.0 | False | None | None | False | None | False | 976.66 | 0 | | 3198086 | 109940 | None | 5.20.1 v-6 | Supplying, fixing and wiring Residual current circuit breaker (RCCB)240/450V upto 300mA sensitivity on existing wood/ panel board.
"
32-40 A 2 pole
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 6025.17 | 6025.17 | 2.0 | False | None | None | False | None | False | 12050.34 | 0 | | 3198087 | 109940 | None | 32.09 v-6 | LT UG CABLES
"1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975
"
3.5 core 35 sqmm
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Km | 203608.34 | 203608.34 | 0.1 | False | None | None | False | None | False | 20360.834 | 0 | | 3198088 | 109940 | None | 21.06 v-6 | Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as
directed by the departmental staff"
35 sqmm to 95 sqmm
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Km | 41153.3 | 41153.3 | 0.1 | False | None | None | False | None | False | 4115.33 | 0 | | 3198089 | 109940 | None | 63.02 v-6 | Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only)
32mm dia
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 125.55 | 125.55 | 8.0 | False | None | None | False | None | False | 1004.4 | 0 | | 3198090 | 109940 | None | 59.02 v-6 | Heavy Duty Copper Terminal Long Barrel 35 sqmm Long Barrel
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 42.29 | 42.29 | 8.0 | False | None | None | False | None | False | 338.32 | 0 | | 3198091 | 109940 | None | 29.03 Elc SR BESCOM -2022-23 | Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr,Supplying and Displaying necessary Danger Boards and Lighting, Using sightRails and Sign Boards at every 100 Mtr wherever necessary as directed
In soil (hard)
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | CUBIC METER | 514.1 | 514.1 | 50.0 | False | None | None | False | None | False | 25705.0 | 0 | | 3198092 | 109940 | None | 51.04 v-6 | Rod Earthing
Rod type of earthing using 40 mm Dia, 3 Mtr long MS rod as ground rod, in earth pit of 300 mm width and
3300 mm depth and using 50x6 mm flat welded to ground rod as terminal & connected to equipment ground terminal using PVC Al wire as specified "
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | No | 2870.52 | 2870.52 | 4.0 | False | None | None | False | None | False | 11482.08 | 0 | | 3198093 | 109940 | None | 51.05 | Bentonite clay slurry for earthing in 50 Kg Bag
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Bag | 486.35 | 486.35 | 4.0 | False | None | None | False | None | False | 1945.4 | 0 | | 3198094 | 109940 | None | 11.3.2 v-6 | ELECTRICAL FIXTURES
Supplying of .feet - PVC Batten with integrated LED tube .W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.
LED light fighting 1 x4'- 20/22 w
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 911.9 | 911.9 | 53.0 | False | None | None | False | None | False | 48330.7 | 0 | | 3198095 | 109940 | None | 11.5.2 v-6 | Supply of round/square recess/surface mounted rolling type LED Down light with . W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @50/60Hz & Power factor 0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical condition
LED square or round down light 10-12W
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 1169.62 | 1169.62 | 12.0 | False | None | None | False | None | False | 14035.44 | 0 | | 3198096 | 109940 | None | 11.11.3 v-6 | Supplying & fixing of retrofit type - LED bulb.W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per watt, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.
7 W, 6500K
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 196.92 | 196.92 | 6.0 | False | None | None | False | None | False | 1181.52 | 0 | | 3198097 | 109940 | None | 11.11.5 v-6 | Supplying & fixing of retrofit type - LED bulb.W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per watt, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.
12W, 6500K
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 355.51 | 355.51 | 4.0 | False | None | None | False | None | False | 1422.04 | 0 | | 3198098 | 109940 | None | 12.46 v-6 | Supplying & Fixing of 70-150 Watts lamp holder 2 Pin
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 83.26 | 83.26 | 10.0 | False | None | None | False | None | False | 832.6 | 0 | | 3198099 | 109940 | None | 11.8.2 v-6 | Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with .W System Power consumption. LED Efficiency130lm/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source.
LED Streetlight 40W
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | No | 5318.12 | 5318.12 | 2.0 | False | None | None | False | None | False | 10636.24 | 0 | | 3198100 | 109940 | None | 6.1 v-6 | Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply.
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 1971.83 | 1971.83 | 10.0 | False | None | None | False | None | False | 19718.3 | 0 | | 3198101 | 109940 | None | 6.3.1 v-6 | Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system.
48" Sweep (1200mm) Regular model
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 3943.65 | 3943.65 | 24.0 | False | None | None | False | None | False | 94647.6 | 0 | | 3198102 | 109940 | None | 13.7.1 v-6 | Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps.
On wall / ceiling / Rafter / Girders
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 161.24 | 161.24 | 65.0 | False | None | None | False | None | False | 10480.6 | 0 | | 3198103 | 109940 | None | 13.1 v-6 | Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing 5 amps. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated
twin twisted copper wire and wiring."
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 225.99 | 225.99 | 24.0 | False | None | None | False | None | False | 5423.76 | 0 | | 3198104 | 109940 | None | 13.13 v-6 | Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame.
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 934.37 | 934.37 | 10.0 | False | None | None | False | None | False | 9343.7 | 0 | | 3198105 | 109940 | None | 13.4.1 v-6 | Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4” dia telescopic M. S. pipe, with 2” dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M. S. sheet, grip bolts & nuts, as required, suitable for 9 to 12 Mtrs. M. S. tubular pole, with necessary two coats of painting, with all other accessories.
Single bracket 1.5 Mtr. Length
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 1930.86 | 1930.86 | 2.0 | False | None | None | False | None | False | 3861.72 | 0 | | 3198106 | 109940 | None | 13.5 v-6 | Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires.
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 214.1 | 214.1 | 2.0 | False | None | None | False | None | False | 428.2 | 0 | | 3198107 | 109940 | None | 5.42.2 v-6 | L.T.PANEL
Fabricating supplying and mounting MS box made out .SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour etc., complete
16SWG
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Sq CM | 0.57 | 0.57 | 60000.0 | False | None | None | False | None | False | 34200.0 | 0 | | 3198108 | 109940 | None | 5.40.1 v-6 | Supplying .amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete.
100Amps 4x30x6mm Aluminum Strips
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | m | 3257.74 | 3257.74 | 1.0 | False | None | None | False | None | False | 3257.74 | 0 | | 3198109 | 109940 | None | 5.41.1 v-6 | Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint
40x40x6mm
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | m | 403.09 | 403.09 | 10.0 | False | None | None | False | None | False | 4030.9 | 0 | | 3198110 | 109940 | None | 5.41.1 v-6 | Supplying and fixing angle iron frame work iabricated out of M.S. angle iron. and M.S. flat . with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint
50x100x50x6mm C channel
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | m | 522.03 | 522.03 | 10.0 | False | None | None | False | None | False | 5220.3 | 0 | | 3198111 | 109940 | None | 5.15.9 v-6 | Supplying and fixing Moulded Case Circuit Breaker (MCCB) over theexisting wood/panel board using necessary screws, bolts, nuts,
necessary phase separators, handle and wiring complete. Protection ofOverload and Short circuitwith adjustable thermal magnetic release,Micro processor release shall have Earth Fault as per IS/IEC 60947-2 .(Icu=100% lcs). In 4P MCCB, all Poles should have protection for
Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility forsegregating Priority and Non-Priority loads must be available in the
MCCB. MCCB shall be provided with double insulation (insulationbetween front cover and internal power circuits to avoid any accidental
contact with live current carrying path with the front cover open).Multi-pole breakers shall be designed to break all the polessimultaneously and they shall have a single mechanism"
FOUR POLE100Amps 25kA
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 11216.42 | 11216.42 | 2.0 | False | None | None | False | None | False | 22432.84 | 0 | | 3198112 | 109940 | None | 5.33 v-6 | Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 12310.7 | 12310.7 | 1.0 | False | None | None | False | None | False | 12310.7 | 0 | | 3198113 | 109940 | None | 5.38 v-6 | Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 613.22 | 613.22 | 3.0 | False | None | None | False | None | False | 1839.66 | 0 | | 3198114 | 109940 | None | 5.34 v-6 | Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound (48/6.32)
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 742.73 | 742.73 | 3.0 | False | None | None | False | None | False | 2228.19 | 0 | | 3198115 | 109940 | None | 5.35 v-6 | Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 A three phase 4 wire whole current class-1 Accuracy Energy Meter
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 7539.73 | 7539.73 | 1.0 | False | None | None | False | None | False | 7539.73 | 0 | | 3198116 | 109940 | None | 9.3.2 v-6 | Supplying, erecting, testing & commissioning of ON-LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with isolation transformer all accessories complete and Excluding batteries and wiring complete.
3 kVA ON LINE UPS
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 51171.03 | 51171.03 | 1.0 | False | None | None | False | None | False | 51171.03 | 0 | | 3198117 | 109940 | None | 9.5.3 v-6 | Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries.
26 AH capacity
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 4772.3 | 4772.3 | 16.0 | False | None | None | False | None | False | 76356.8 | 0 | | 3198118 | 109940 | None | 8.1 v-6 | TELEPHONE AND NETWORKING
Supplying and drawing UTP-CAT 6E LAN cable.
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | m | 50.22 | 50.22 | 330.0 | False | None | None | False | None | False | 16572.6 | 0 | | 3198119 | 109940 | None | 8.10.1 v-6 | Supplying & Fixing of I/O Socket with back box Single I/O
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 647.58 | 647.58 | 11.0 | False | None | None | False | None | False | 7123.38 | 0 | | 3198120 | 109940 | None | 8.4.1 v-6 | Supplying & Fixing of switch mounting rack with power manager & Cable manager (85/11.4) 4U with 450mm depth
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 6465.27 | 6465.27 | 1.0 | False | None | None | False | None | False | 6465.27 | 0 | | 3198121 | 109940 | None | 8.9.11 v-6 | 16 port 10/100/1000 Switch
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 8511.1 | 8511.1 | 1.0 | False | None | None | False | None | False | 8511.1 | 0 | | 3198122 | 109940 | None | 8.11.1 v-6 | Supplying & fixing of .mtrs. Cat 6Patch Cable. 2Mtr
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 296.04 | 296.04 | 11.0 | False | None | None | False | None | False | 3256.44 | 0 | | 3198123 | 109940 | None | 8.12.3 v-6 | Supplying & Fixing of Patch panel for Lan Cabling.
16 Port 10/100 patch panel
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 4030.88 | 4030.88 | 1.0 | False | None | None | False | None | False | 4030.88 | 0 | | 3198124 | 109940 | None | 8.13.2 v-6 | Supplying and fixing of MDF krone junction box with KRONEModule / Telephone cable termination.
20 Pair
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | m | 506.17 | 506.17 | 1.0 | False | None | None | False | None | False | 506.17 | 0 | | 3198125 | 109940 | None | 6.7.1 v-6 | Supplying .TR split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 V with hermetically sealed compressor with air cooled condenser, motor capacitor and start run capacitors, relay and over load protector internal unit, with one indoor and one outdoor unit The condenser unit will be placed outside the room on the terrace to avoid noise including standard length of suitable size copper tubing covered with insulation tube. (High wall chorded/cordless) suitable capacity 3 core sheathed/ PVC copper cable and a battery operated wireless remote unit
5star 1 Ton capacity
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 55118.65 | 55118.65 | 2.0 | False | None | None | False | None | False | 110237.3 | 0 | | 3198126 | 109940 | None | 6.12 v-6 | Installation charges for split type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable Angle Iron support up to 3.0 ton split/cassette type A/C.
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 4196.08 | 4196.08 | 2.0 | False | None | None | False | None | False | 8392.16 | 0 | | 3198127 | 109940 | None | 9.1.1 v-6 | Supplying, erecting, testing and commissioning of voltage stabilizer suitable for 170 to 270 v in put and load variation from no load to full load, with over load protection, spike suppression, operating at 00 C to 400 C. Range etc., complete.
3 KVA Capacity
---- etc. complete with all lead and lift as per detailed specification and directions of the Engineer incharge of the work. | Each | 5279.79 | 5279.79 | 2.0 | False | None | None | False | None | False | 10559.58 | 0 |
|
|
|---|